hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

ARM: PL08x: assign ccfg DMA request signal in prep_phy_channel() 

There is no need to wait until we start processing a tx descriptor
before setting up the DMA request selection in the ccfg register.
We know which channel and request will be used in prep_phy_channel(),
so setup the ccfg request selection at txd creation time in
prep_phy_channel().

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This commit is contained in:
Russell King - ARM Linux 2011-01-03 22:39:53 +00:00 committed by Dan Williams
parent 4983a04fd2
commit 09b3c32333
1 changed files with 9 additions and 11 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

20
drivers/dma/amba-pl08x.c
View File

@ -194,18 +194,10 @@ static void pl08x_start_txd(struct pl08x_dma_chan *plchan,
struct pl08x_driver_data *pl08x = plchan->host;
struct pl08x_phy_chan *phychan = plchan->phychan;
struct pl08x_lli *lli = &txd->llis_va[0];
u32 val, ccfg = txd->ccfg;
u32 val;
plchan->at = txd;
/* Assign the flow control signal to this channel */
if (txd->direction == DMA_TO_DEVICE)
/* Select signal as destination */
ccfg |= phychan->signal << PL080_CONFIG_DST_SEL_SHIFT;
else if (txd->direction == DMA_FROM_DEVICE)
/* Select signal as source */
ccfg |= phychan->signal << PL080_CONFIG_SRC_SEL_SHIFT;
/* Wait for channel inactive */
while (pl08x_phy_channel_busy(phychan))
cpu_relax();
@ -214,13 +206,13 @@ static void pl08x_start_txd(struct pl08x_dma_chan *plchan,
"WRITE channel %d: csrc=0x%08x, cdst=0x%08x, "
"clli=0x%08x, cctl=0x%08x, ccfg=0x%08x\n",
phychan->id, lli->src, lli->dst, lli->lli, lli->cctl,
ccfg);
txd->ccfg);
writel(lli->src, phychan->base + PL080_CH_SRC_ADDR);
writel(lli->dst, phychan->base + PL080_CH_DST_ADDR);
writel(lli->lli, phychan->base + PL080_CH_LLI);
writel(lli->cctl, phychan->base + PL080_CH_CONTROL);
writel(ccfg, phychan->base + PL080_CH_CONFIG);
writel(txd->ccfg, phychan->base + PL080_CH_CONFIG);
/* Enable the DMA channel */
/* Do not access config register until channel shows as disabled */
@ -1001,6 +993,12 @@ static int prep_phy_channel(struct pl08x_dma_chan *plchan,
return -EBUSY;
}
ch->signal = ret;
/* Assign the flow control signal to this channel */
if (txd->direction == DMA_TO_DEVICE)
txd->ccfg |= ch->signal << PL080_CONFIG_DST_SEL_SHIFT;
else if (txd->direction == DMA_FROM_DEVICE)
txd->ccfg |= ch->signal << PL080_CONFIG_SRC_SEL_SHIFT;
}
dev_dbg(&pl08x->adev->dev, "allocated physical channel %d and signal %d for xfer on %s\n",