macb: Kill PHY reset code

With the phylib now being aware of the "reset-gpios" PHY node property,
there should be no need to frob the PHY reset in this driver anymore...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Sergei Shtylyov 2017-12-04 11:34:50 +01:00 committed by David S. Miller
parent bafbdd527d
commit 096457b552
2 changed files with 0 additions and 22 deletions

View File

@ -1171,7 +1171,6 @@ struct macb {
unsigned int dma_burst_length;
phy_interface_t phy_interface;
struct gpio_desc *reset_gpio;
/* AT91RM9200 transmit */
struct sk_buff *skb; /* holds skb until xmit interrupt completes */

View File

@ -3803,7 +3803,6 @@ static int macb_probe(struct platform_device *pdev)
= macb_config->clk_init;
int (*init)(struct platform_device *) = macb_config->init;
struct device_node *np = pdev->dev.of_node;
struct device_node *phy_node;
struct clk *pclk, *hclk = NULL, *tx_clk = NULL, *rx_clk = NULL;
unsigned int queue_mask, num_queues;
struct macb_platform_data *pdata;
@ -3909,18 +3908,6 @@ static int macb_probe(struct platform_device *pdev)
else
macb_get_hwaddr(bp);
/* Power up the PHY if there is a GPIO reset */
phy_node = of_get_next_available_child(np, NULL);
if (phy_node) {
int gpio = of_get_named_gpio(phy_node, "reset-gpios", 0);
if (gpio_is_valid(gpio)) {
bp->reset_gpio = gpio_to_desc(gpio);
gpiod_direction_output(bp->reset_gpio, 1);
}
}
of_node_put(phy_node);
err = of_get_phy_mode(np);
if (err < 0) {
pdata = dev_get_platdata(&pdev->dev);
@ -3967,10 +3954,6 @@ err_out_unregister_mdio:
of_phy_deregister_fixed_link(np);
mdiobus_free(bp->mii_bus);
/* Shutdown the PHY if there is a GPIO reset */
if (bp->reset_gpio)
gpiod_set_value(bp->reset_gpio, 0);
err_out_free_netdev:
free_netdev(dev);
@ -4001,10 +3984,6 @@ static int macb_remove(struct platform_device *pdev)
dev->phydev = NULL;
mdiobus_free(bp->mii_bus);
/* Shutdown the PHY if there is a GPIO reset */
if (bp->reset_gpio)
gpiod_set_value(bp->reset_gpio, 0);
unregister_netdev(dev);
clk_disable_unprepare(bp->tx_clk);
clk_disable_unprepare(bp->hclk);