ARM: GIC: Make MULTI_IRQ_HANDLER mandatory

Now that MULTI_IRQ_HANDLER is selected by all the in-tree
GIC users, make it mandatory and remove the unused macros.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
This commit is contained in:
Marc Zyngier 2011-09-06 13:27:10 +01:00
parent ab65be268a
commit 08d33b27f7
10 changed files with 2 additions and 76 deletions

View File

@ -278,7 +278,6 @@ config ARCH_REALVIEW
select ARM_TIMER_SP804
select GPIO_PL061 if GPIOLIB
select NEED_MACH_MEMORY_H
select MULTI_IRQ_HANDLER
help
This enables support for ARM Ltd RealView boards.
@ -311,7 +310,6 @@ config ARCH_VEXPRESS
select ICST
select PLAT_VERSATILE
select PLAT_VERSATILE_CLCD
select MULTI_IRQ_HANDLER
help
This enables support for the ARM Ltd Versatile Express boards.
@ -347,7 +345,6 @@ config ARCH_HIGHBANK
select GENERIC_CLOCKEVENTS
select HAVE_ARM_SCU
select USE_OF
select MULTI_IRQ_HANDLER
help
Support for the Calxeda Highbank SoC based boards.
@ -366,7 +363,6 @@ config ARCH_CNS3XXX
select ARM_GIC
select MIGHT_HAVE_PCI
select PCI_DOMAINS if PCI
select MULTI_IRQ_HANDLER
help
Support for Cavium Networks CNS3XXX platform.
@ -855,7 +851,6 @@ config ARCH_EXYNOS
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select NEED_MACH_MEMORY_H
select MULTI_IRQ_HANDLER
help
Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5)
@ -979,7 +974,6 @@ config ARCH_ZYNQ
select ARM_AMBA
select ICST
select USE_OF
select MULTI_IRQ_HANDLER
help
Support for Xilinx Zynq ARM Cortex A9 Platform
endchoice

View File

@ -1,5 +1,6 @@
config ARM_GIC
select IRQ_DOMAIN
select MULTI_IRQ_HANDLER
bool
config GIC_NON_BANKED

View File

@ -71,9 +71,6 @@ struct gic_chip_data {
static DEFINE_RAW_SPINLOCK(irq_controller_lock);
/* Address of GIC 0 CPU interface */
void __iomem *gic_cpu_base_addr __read_mostly;
/*
* Supported arch specific GIC irq extension.
* Default make them NULL.
@ -700,7 +697,6 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start,
* For secondary GICs, skip over PPIs, too.
*/
if (gic_nr == 0) {
gic_cpu_base_addr = cpu_base;
domain->hwirq_base = 16;
if (irq_start > 0)
irq_start = (irq_start & ~31) + 16;

View File

@ -1,60 +0,0 @@
/*
* arch/arm/include/asm/hardware/entry-macro-gic.S
*
* Low-level IRQ helper macros for GIC
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <asm/hardware/gic.h>
#ifndef HAVE_GET_IRQNR_PREAMBLE
.macro get_irqnr_preamble, base, tmp
ldr \base, =gic_cpu_base_addr
ldr \base, [\base]
.endm
#endif
/*
* The interrupt numbering scheme is defined in the
* interrupt controller spec. To wit:
*
* Interrupts 0-15 are IPI
* 16-31 are local. We allow 30 to be used for the watchdog.
* 32-1020 are global
* 1021-1022 are reserved
* 1023 is "spurious" (no interrupt)
*
* A simple read from the controller will tell us the number of the highest
* priority enabled interrupt. We then just need to check whether it is in the
* valid range for an IRQ (30-1020 inclusive).
*/
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqstat, [\base, #GIC_CPU_INTACK]
/* bits 12-10 = src CPU, 9-0 = int # */
ldr \tmp, =1021
bic \irqnr, \irqstat, #0x1c00
cmp \irqnr, #15
cmpcc \irqnr, \irqnr
cmpne \irqnr, \tmp
cmpcs \irqnr, \irqnr
.endm
/* We assume that irqstat (the raw value of the IRQ acknowledge
* register) is preserved from the macro above.
* If there is an IPI, we immediately signal end of interrupt on the
* controller, since this requires the original irqstat value which
* we won't easily be able to recreate later.
*/
.macro test_for_ipi, irqnr, irqstat, base, tmp
bic \irqnr, \irqstat, #0x1c00
cmp \irqnr, #16
strcc \irqstat, [\base, #GIC_CPU_EOI]
cmpcs \irqnr, \irqnr
.endm

View File

@ -36,7 +36,6 @@
#include <linux/irqdomain.h>
struct device_node;
extern void __iomem *gic_cpu_base_addr;
extern struct irq_chip gic_arch_extn;
void gic_init_bases(unsigned int, int, void __iomem *, void __iomem *,

View File

@ -50,7 +50,6 @@ config ARCH_MSM8X60
select GPIO_MSM_V2
select MSM_GPIOMUX
select MSM_SCM if SMP
select MULTI_IRQ_HANDLER
config ARCH_MSM8960
bool "MSM8960"
@ -61,7 +60,6 @@ config ARCH_MSM8960
select MSM_V2_TLMM
select MSM_GPIOMUX
select MSM_SCM if SMP
select MULTI_IRQ_HANDLER
endchoice

View File

@ -37,6 +37,7 @@ config ARCH_OMAP3
select ARCH_HAS_OPP
select PM_OPP if PM
select ARM_CPU_SUSPEND if PM
select MULTI_IRQ_HANDLER
config ARCH_OMAP4
bool "TI OMAP4"

View File

@ -13,7 +13,6 @@ config ARCH_TEGRA_2x_SOC
select USB_ARCH_HAS_EHCI if USB_SUPPORT
select USB_ULPI if USB_SUPPORT
select USB_ULPI_VIEWPORT if USB_SUPPORT
select MULTI_IRQ_HANDLER
help
Support for NVIDIA Tegra AP20 and T20 processors, based on the
ARM CortexA9MP CPU and the ARM PL310 L2 cache controller

View File

@ -7,7 +7,6 @@ config UX500_SOC_COMMON
select HAS_MTU
select ARM_ERRATA_753970
select ARM_ERRATA_754322
select MULTI_IRQ_HANDLER
menu "Ux500 SoC"

View File

@ -24,7 +24,6 @@ config ARCH_OMAP2PLUS
select CLKDEV_LOOKUP
select GENERIC_IRQ_CHIP
select OMAP_DM_TIMER
select MULTI_IRQ_HANDLER
help
"Systems based on OMAP2, OMAP3 or OMAP4"