hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

First set of IIO fixes for the 5.2 cycle. 

* ads124
   - Avoid a buffer overrun when setting an array to 0.
 * ads8688
   - Don't use the pollfunc timestamp as it isn't set and would be wrong
     anyway for a device that does sampling on demand.
 * ds4422
   - Fix masking on register used for chip verification. Wrong address
     was being read.
 * mpu6050
   - Fix the fifo layout for ICM20602 to avoid underreading and hence failure
     to move on to the next record in the fifo.
 * NPCM ADC
   - Make sure there is actually a valid regulator before reading its voltage.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAlzhFEARHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0FojNMg//SCVSRt1KmsRDNdtCyUtgrs2BMISBQ5zP
 XpDvHajk9lPJvt/rbdKNJPC23N0qjV0fIfaMjsN1mTrbeL3JQE7r+17iCJ1EL+dj
 H2BFQlzMN9bPt9wx/VeQnTqPiTuwNpB5/eNb3mfGKGDkKmmfnL0+DDJEQycBgfK7
 gRgX4XGsMYLmKPAJvrQdSvMvu0V8UTAkZNBdcMydhl9Jba9elXPqI5kYFi7pNajD
 09fAGKhkeHd9whRNa2O6wKyRXh+c7regPAMtwjwlmv4dsmRHocYeLQOI05guuKf1
 /+0I+ptOf8RRHGOFX8j7rXua9Q2B+SzXsmoH4RlJLb23Jcqz7/ZDfcAGGVPndlME
 R3vGsYsoSLkmbRkVQ9ygDrzRsNnFKw/pR+u+zKdi/DH3C9EUI5JmRAkJSloElmrr
 VE1ZC7HXxUiKjfZaBLFeuugt65QGfxsGp+UsuFIgg0WQGk7yVWdC8RL9SZUy3wEq
 xFcfiWfbJp/LnVjs6aUBAV8cROswBv/ebcQZgOSPC/j8HyU6xRzmXVt4urBVwKVd
 gr3G+w7JhxCyByXJp7vqFtOmYeHB1X1UY8GNzgxsz9q2A1wtlEsXGpIh/arDY4r9
 toiSQAPAoVRBoLYfj+32EWgPR0iahjE81QZwWAqSzgBmompTQ1ByAyieOC4whgOe
 Lau/nLtAvGU=
 =nq1b
 -----END PGP SIGNATURE-----

Merge tag 'iio-fixes-for-5.2a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus:

Jonathan writes:

First set of IIO fixes for the 5.2 cycle.

* ads124
  - Avoid a buffer overrun when setting an array to 0.
* ads8688
  - Don't use the pollfunc timestamp as it isn't set and would be wrong
    anyway for a device that does sampling on demand.
* ds4422
  - Fix masking on register used for chip verification. Wrong address
    was being read.
* mpu6050
  - Fix the fifo layout for ICM20602 to avoid underreading and hence failure
    to move on to the next record in the fifo.
* NPCM ADC
  - Make sure there is actually a valid regulator before reading its voltage.

* tag 'iio-fixes-for-5.2a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
  iio: adc: ti-ads8688: fix timestamp is not updated in buffer
  iio: dac: ds4422/ds4424 fix chip verification
  iio: imu: mpu6050: Fix FIFO layout for ICM20602
  iio: adc: ads124: avoid buffer overflow
  iio: adc: modify NPCM ADC read reference voltage
This commit is contained in:
Greg Kroah-Hartman 2019-05-20 09:15:14 +02:00
parent a188339ca5 e6d1229831
commit 083a685c2e
7 changed files with 68 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
drivers/iio/adc/npcm_adc.c
View File

@ -149,7 +149,7 @@ static int npcm_adc_read_raw(struct iio_dev *indio_dev,
}
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
if (info->vref) {
if (!IS_ERR(info->vref)) {
vref_uv = regulator_get_voltage(info->vref);
*val = vref_uv / 1000;
} else {

2
drivers/iio/adc/ti-ads124s08.c
View File

@ -202,7 +202,7 @@ static int ads124s_read(struct iio_dev *indio_dev, unsigned int chan)
};
priv->data[0] = ADS124S08_CMD_RDATA;
memset(&priv->data[1], ADS124S08_CMD_NOP, sizeof(priv->data));
memset(&priv->data[1], ADS124S08_CMD_NOP, sizeof(priv->data) - 1);
ret = spi_sync_transfer(priv->spi, t, ARRAY_SIZE(t));
if (ret < 0)

2
drivers/iio/adc/ti-ads8688.c
View File

@ -397,7 +397,7 @@ static irqreturn_t ads8688_trigger_handler(int irq, void *p)
}
iio_push_to_buffers_with_timestamp(indio_dev, buffer,
pf->timestamp);
iio_get_time_ns(indio_dev));
iio_trigger_notify_done(indio_dev->trig);

2
drivers/iio/dac/ds4424.c
View File

@ -166,7 +166,7 @@ static int ds4424_verify_chip(struct iio_dev *indio_dev)
{
int ret, val;
ret = ds4424_get_value(indio_dev, &val, DS4424_DAC_ADDR(0));
ret = ds4424_get_value(indio_dev, &val, 0);
if (ret < 0)
dev_err(&indio_dev->dev,
"%s failed. ret: %d\n", __func__, ret);

46
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
View File

@ -471,7 +471,10 @@ inv_mpu6050_read_raw(struct iio_dev *indio_dev,
return IIO_VAL_INT_PLUS_MICRO;
case IIO_TEMP:
*val = 0;
*val2 = INV_MPU6050_TEMP_SCALE;
if (st->chip_type == INV_ICM20602)
*val2 = INV_ICM20602_TEMP_SCALE;
else
*val2 = INV_MPU6050_TEMP_SCALE;
return IIO_VAL_INT_PLUS_MICRO;
default:
@ -480,7 +483,10 @@ inv_mpu6050_read_raw(struct iio_dev *indio_dev,
case IIO_CHAN_INFO_OFFSET:
switch (chan->type) {
case IIO_TEMP:
*val = INV_MPU6050_TEMP_OFFSET;
if (st->chip_type == INV_ICM20602)
*val = INV_ICM20602_TEMP_OFFSET;
else
*val = INV_MPU6050_TEMP_OFFSET;
return IIO_VAL_INT;
default:
@ -847,6 +853,32 @@ static const struct iio_chan_spec inv_mpu_channels[] = {
INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_Z, INV_MPU6050_SCAN_ACCL_Z),
};
static const struct iio_chan_spec inv_icm20602_channels[] = {
IIO_CHAN_SOFT_TIMESTAMP(INV_ICM20602_SCAN_TIMESTAMP),
{
.type = IIO_TEMP,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW)
| BIT(IIO_CHAN_INFO_OFFSET)
| BIT(IIO_CHAN_INFO_SCALE),
.scan_index = INV_ICM20602_SCAN_TEMP,
.scan_type = {
.sign = 's',
.realbits = 16,
.storagebits = 16,
.shift = 0,
.endianness = IIO_BE,
},
},
INV_MPU6050_CHAN(IIO_ANGL_VEL, IIO_MOD_X, INV_ICM20602_SCAN_GYRO_X),
INV_MPU6050_CHAN(IIO_ANGL_VEL, IIO_MOD_Y, INV_ICM20602_SCAN_GYRO_Y),
INV_MPU6050_CHAN(IIO_ANGL_VEL, IIO_MOD_Z, INV_ICM20602_SCAN_GYRO_Z),
INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_Y, INV_ICM20602_SCAN_ACCL_Y),
INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_X, INV_ICM20602_SCAN_ACCL_X),
INV_MPU6050_CHAN(IIO_ACCEL, IIO_MOD_Z, INV_ICM20602_SCAN_ACCL_Z),
};
/*
* The user can choose any frequency between INV_MPU6050_MIN_FIFO_RATE and
* INV_MPU6050_MAX_FIFO_RATE, but only these frequencies are matched by the
@ -1102,8 +1134,14 @@ int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name,
indio_dev->name = name;
else
indio_dev->name = dev_name(dev);
indio_dev->channels = inv_mpu_channels;
indio_dev->num_channels = ARRAY_SIZE(inv_mpu_channels);
if (chip_type == INV_ICM20602) {
indio_dev->channels = inv_icm20602_channels;
indio_dev->num_channels = ARRAY_SIZE(inv_icm20602_channels);
} else {
indio_dev->channels = inv_mpu_channels;
indio_dev->num_channels = ARRAY_SIZE(inv_mpu_channels);
}
indio_dev->info = &mpu_info;
indio_dev->modes = INDIO_BUFFER_TRIGGERED;

20
drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
View File

@ -208,6 +208,9 @@ struct inv_mpu6050_state {
#define INV_MPU6050_BYTES_PER_3AXIS_SENSOR 6
#define INV_MPU6050_FIFO_COUNT_BYTE 2
/* ICM20602 FIFO samples include temperature readings */
#define INV_ICM20602_BYTES_PER_TEMP_SENSOR 2
/* mpu6500 registers */
#define INV_MPU6500_REG_ACCEL_CONFIG_2 0x1D
#define INV_MPU6500_REG_ACCEL_OFFSET 0x77
@ -229,6 +232,9 @@ struct inv_mpu6050_state {
#define INV_MPU6050_GYRO_CONFIG_FSR_SHIFT 3
#define INV_MPU6050_ACCL_CONFIG_FSR_SHIFT 3
#define INV_ICM20602_TEMP_OFFSET 8170
#define INV_ICM20602_TEMP_SCALE 3060
/* 6 + 6 round up and plus 8 */
#define INV_MPU6050_OUTPUT_DATA_SIZE 24
@ -270,7 +276,7 @@ struct inv_mpu6050_state {
#define INV_ICM20608_WHOAMI_VALUE 0xAF
#define INV_ICM20602_WHOAMI_VALUE 0x12
/* scan element definition */
/* scan element definition for generic MPU6xxx devices */
enum inv_mpu6050_scan {
INV_MPU6050_SCAN_ACCL_X,
INV_MPU6050_SCAN_ACCL_Y,
@ -281,6 +287,18 @@ enum inv_mpu6050_scan {
INV_MPU6050_SCAN_TIMESTAMP,
};
/* scan element definition for ICM20602, which includes temperature */
enum inv_icm20602_scan {
INV_ICM20602_SCAN_ACCL_X,
INV_ICM20602_SCAN_ACCL_Y,
INV_ICM20602_SCAN_ACCL_Z,
INV_ICM20602_SCAN_TEMP,
INV_ICM20602_SCAN_GYRO_X,
INV_ICM20602_SCAN_GYRO_Y,
INV_ICM20602_SCAN_GYRO_Z,
INV_ICM20602_SCAN_TIMESTAMP,
};
enum inv_mpu6050_filter_e {
INV_MPU6050_FILTER_256HZ_NOLPF2 = 0,
INV_MPU6050_FILTER_188HZ,

3
drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
View File

@ -207,6 +207,9 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p)
if (st->chip_config.gyro_fifo_enable)
bytes_per_datum += INV_MPU6050_BYTES_PER_3AXIS_SENSOR;
if (st->chip_type == INV_ICM20602)
bytes_per_datum += INV_ICM20602_BYTES_PER_TEMP_SENSOR;
/*
* read fifo_count register to know how many bytes are inside the FIFO
* right now