From 082bb85fbfb4b87787229182db4d22e5ed9fc8e6 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Thu, 10 Aug 2017 11:29:54 +0800 Subject: [PATCH] mmc: sunxi: Fix clock rate passed to sunxi_mmc_clk_set_phase sunxi_mmc_clk_set_phase expects the actual card clock rate to be passed to it. When the internal divider code was reworked in change ("mmc: sunxi: Support MMC DDR52 transfer mode with new timing mode"), this requirement was missed, and the module clock rate was passed in instead. This broke 8 bit DDR MMC on old controllers, as the module clock rate is double the card clock rate, for which we have no valid delay settings. Fix this by applying the internal divider to the clock rate right after we configure it in hardware. Signed-off-by: Chen-Yu Tsai Signed-off-by: Ulf Hansson --- drivers/mmc/host/sunxi-mmc.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c index 6c7eb859ace1..da5f46a14497 100644 --- a/drivers/mmc/host/sunxi-mmc.c +++ b/drivers/mmc/host/sunxi-mmc.c @@ -821,6 +821,9 @@ static int sunxi_mmc_clk_set_rate(struct sunxi_mmc_host *host, rval |= div - 1; mmc_writel(host, REG_CLKCR, rval); + /* update card clock rate to account for internal divider */ + rate /= div; + if (host->use_new_timings) { /* Don't touch the delay bits */ rval = mmc_readl(host, REG_SD_NTSR); @@ -828,6 +831,7 @@ static int sunxi_mmc_clk_set_rate(struct sunxi_mmc_host *host, mmc_writel(host, REG_SD_NTSR, rval); } + /* sunxi_mmc_clk_set_phase expects the actual card clock rate */ ret = sunxi_mmc_clk_set_phase(host, ios, rate); if (ret) return ret; @@ -849,7 +853,7 @@ static int sunxi_mmc_clk_set_rate(struct sunxi_mmc_host *host, return ret; /* And we just enabled our clock back */ - mmc->actual_clock = rate / div; + mmc->actual_clock = rate; return 0; }