From 5e549a0c18fc0321c18e7b6842cb7afc90aab396 Mon Sep 17 00:00:00 2001 From: Petr Kulhavy Date: Mon, 3 Oct 2016 16:40:49 +0200 Subject: [PATCH 001/792] ASoC: tas571x: wait 50ms after oscillator trim Wait extra 50ms after writing the oscillator trim register in probe(), as recommended by the TAS5721 and TAS5711 datasheets. Signed-off-by: Petr Kulhavy Signed-off-by: Mark Brown --- sound/soc/codecs/tas571x.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/codecs/tas571x.c b/sound/soc/codecs/tas571x.c index df5e5cb33baa..de65ecf534af 100644 --- a/sound/soc/codecs/tas571x.c +++ b/sound/soc/codecs/tas571x.c @@ -754,6 +754,7 @@ static int tas571x_i2c_probe(struct i2c_client *client, if (ret) return ret; + usleep_range(50000, 60000); memcpy(&priv->codec_driver, &tas571x_codec, sizeof(priv->codec_driver)); priv->codec_driver.component_driver.controls = priv->chip->controls; From 960695670502afa153c2294e15ca790dbe086f4d Mon Sep 17 00:00:00 2001 From: Petr Kulhavy Date: Mon, 3 Oct 2016 16:40:50 +0200 Subject: [PATCH 002/792] ASoC: tas571x: move mixer volume controls from TAS5711 to TAS5717 Channel 1 and 2 Mixer Volume controls (registers 0x72/0x73 and 0x76/0x77) were wrongly assigned to tas5711_controls in commit f252d2346022 ("ASoC: tas571x: add input channel mixer for TAS5717/19") Therefore move them to tas5717_controls. Signed-off-by: Petr Kulhavy Signed-off-by: Mark Brown --- sound/soc/codecs/tas571x.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/sound/soc/codecs/tas571x.c b/sound/soc/codecs/tas571x.c index de65ecf534af..34e4ce6f23d8 100644 --- a/sound/soc/codecs/tas571x.c +++ b/sound/soc/codecs/tas571x.c @@ -401,16 +401,6 @@ static const struct snd_kcontrol_new tas5711_controls[] = { TAS571X_SOFT_MUTE_REG, TAS571X_SOFT_MUTE_CH1_SHIFT, TAS571X_SOFT_MUTE_CH2_SHIFT, 1, 1), - - SOC_DOUBLE_R_RANGE("CH1 Mixer Volume", - TAS5717_CH1_LEFT_CH_MIX_REG, - TAS5717_CH1_RIGHT_CH_MIX_REG, - 16, 0, 0x80, 0), - - SOC_DOUBLE_R_RANGE("CH2 Mixer Volume", - TAS5717_CH2_LEFT_CH_MIX_REG, - TAS5717_CH2_RIGHT_CH_MIX_REG, - 16, 0, 0x80, 0), }; static const struct regmap_range tas571x_readonly_regs_range[] = { @@ -488,6 +478,16 @@ static const struct snd_kcontrol_new tas5717_controls[] = { TAS571X_SOFT_MUTE_CH1_SHIFT, TAS571X_SOFT_MUTE_CH2_SHIFT, 1, 1), + SOC_DOUBLE_R_RANGE("CH1 Mixer Volume", + TAS5717_CH1_LEFT_CH_MIX_REG, + TAS5717_CH1_RIGHT_CH_MIX_REG, + 16, 0, 0x80, 0), + + SOC_DOUBLE_R_RANGE("CH2 Mixer Volume", + TAS5717_CH2_LEFT_CH_MIX_REG, + TAS5717_CH2_RIGHT_CH_MIX_REG, + 16, 0, 0x80, 0), + /* * The biquads are named according to the register names. * Please note that TI's TAS57xx Graphical Development Environment From e54de7f555970915c3856e7709a7ff74d352f315 Mon Sep 17 00:00:00 2001 From: Petr Kulhavy Date: Mon, 3 Oct 2016 16:40:47 +0200 Subject: [PATCH 003/792] ASoC: tas571x: extend the t_i2c time to comply with TAS5721 TAS5721 datasheet recommends to wait at least 13.5ms after deasserting the RESET signal. For TAS5717 this time is only 12ms, which was the original value in the code. Extend the wait time after deasserting RESET from 12 to 13.5ms to comply with the TAS5721 specification. Signed-off-by: Petr Kulhavy Signed-off-by: Mark Brown --- sound/soc/codecs/tas571x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/tas571x.c b/sound/soc/codecs/tas571x.c index 34e4ce6f23d8..512b9e663e89 100644 --- a/sound/soc/codecs/tas571x.c +++ b/sound/soc/codecs/tas571x.c @@ -747,7 +747,7 @@ static int tas571x_i2c_probe(struct i2c_client *client, /* pulse the active low reset line for ~100us */ usleep_range(100, 200); gpiod_set_value(priv->reset_gpio, 0); - usleep_range(12000, 20000); + usleep_range(13500, 20000); } ret = regmap_write(priv->regmap, TAS571X_OSC_TRIM_REG, 0); From 8b0678dc914271e9ad4317fe82555ead92ce1cb9 Mon Sep 17 00:00:00 2001 From: Petr Kulhavy Date: Mon, 3 Oct 2016 16:40:48 +0200 Subject: [PATCH 004/792] ASoC: tas571x: remove improper PDN signal usage in set_bias_level The set_bias_level toggles the PDN signal when entering SND_SOC_BIAS_STANDBY and SND_SOC_BIAS_OFF. However this has no effect and actually breaks things down (tested with TAS5717) due to the following reasons: 1) holding down PDN does not save power but holding down RST does 2) now hard mute via register 0x5 is implemented and therefore it is no longer needed to toggle PDN to enter all channel shut down 3) in order to leave PDN it is required to toggle the RST signal (see TAS5721 datasheet), which was not implemented 4) toggling PDN as implemented actually mutes PWMs and there is no audio output (tested on TAS5717) For these reasons remove the PDN signal toggling and just initialize it to inactive in probe(). Signed-off-by: Petr Kulhavy Signed-off-by: Mark Brown --- sound/soc/codecs/tas571x.c | 14 -------------- 1 file changed, 14 deletions(-) diff --git a/sound/soc/codecs/tas571x.c b/sound/soc/codecs/tas571x.c index 512b9e663e89..810369f687d7 100644 --- a/sound/soc/codecs/tas571x.c +++ b/sound/soc/codecs/tas571x.c @@ -341,20 +341,9 @@ static int tas571x_set_bias_level(struct snd_soc_codec *codec, return ret; } } - - gpiod_set_value(priv->pdn_gpio, 0); - usleep_range(5000, 6000); - - regcache_cache_only(priv->regmap, false); - ret = regcache_sync(priv->regmap); - if (ret) - return ret; } break; case SND_SOC_BIAS_OFF: - regcache_cache_only(priv->regmap, true); - gpiod_set_value(priv->pdn_gpio, 1); - if (!IS_ERR(priv->mclk)) clk_disable_unprepare(priv->mclk); break; @@ -771,9 +760,6 @@ static int tas571x_i2c_probe(struct i2c_client *client, return ret; } - regcache_cache_only(priv->regmap, true); - gpiod_set_value(priv->pdn_gpio, 1); - return snd_soc_register_codec(&client->dev, &priv->codec_driver, &tas571x_dai, 1); } From 0dcfc487e521ab2d7da5c512d74337c6e706855e Mon Sep 17 00:00:00 2001 From: Sathyanarayana Nujella Date: Tue, 4 Oct 2016 10:33:20 -0700 Subject: [PATCH 005/792] ASoC: Intel: report JACK_LINEOUT event This patch updates Jack type bitmask to include SND_JACK_LINEOUT while creating a new jack, so that LINEOUT events are reported properly. Signed-off-by: Sathyanarayana Nujella Acked-by: Vinod Koul Signed-off-by: Mark Brown --- sound/soc/intel/boards/bxt_da7219_max98357a.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/intel/boards/bxt_da7219_max98357a.c b/sound/soc/intel/boards/bxt_da7219_max98357a.c index 3774b117d365..2c93fa26e13b 100644 --- a/sound/soc/intel/boards/bxt_da7219_max98357a.c +++ b/sound/soc/intel/boards/bxt_da7219_max98357a.c @@ -129,8 +129,8 @@ static int broxton_da7219_codec_init(struct snd_soc_pcm_runtime *rtd) */ ret = snd_soc_card_jack_new(rtd->card, "Headset Jack", SND_JACK_HEADSET | SND_JACK_BTN_0 | SND_JACK_BTN_1 | - SND_JACK_BTN_2 | SND_JACK_BTN_3, &broxton_headset, - NULL, 0); + SND_JACK_BTN_2 | SND_JACK_BTN_3 | SND_JACK_LINEOUT, + &broxton_headset, NULL, 0); if (ret) { dev_err(rtd->dev, "Headset Jack creation failed: %d\n", ret); return ret; From 7c45e3cc6a59fb00edea65dfb6d3ae60403e4539 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 26 Oct 2015 12:35:02 +0900 Subject: [PATCH 006/792] ASoC: topology: Reenable use from userspace We had inserted a #error into the topology UAPI code to ensure that the ABI was not adopted by userspace while final review and testing was ongoing. The idea was that some finishing touches would be made to the ABI before declaring it stable and suitable for use in production but this has not yet happened as more than a year later revisions to the ABI are still onging. The reality however is that people are shipping topology files in production and these ABI changes are causing practical issues for users and we can't break userspace. This makes this error pointless so we should remove it. Signed-off-by: Mark Brown Acked-by: Vinod Koul --- include/uapi/sound/asoc.h | 6 ------ 1 file changed, 6 deletions(-) diff --git a/include/uapi/sound/asoc.h b/include/uapi/sound/asoc.h index 33d00a4ce656..819d895edfdc 100644 --- a/include/uapi/sound/asoc.h +++ b/include/uapi/sound/asoc.h @@ -18,12 +18,6 @@ #include #include -#ifndef __KERNEL__ -#error This API is an early revision and not enabled in the current -#error kernel release, it will be enabled in a future kernel version -#error with incompatible changes to what is here. -#endif - /* * Maximum number of channels topology kcontrol can represent. */ From c3474e211576fc88ddd1f3e8ce3b06a2051438e7 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 10 Oct 2016 14:33:20 +0200 Subject: [PATCH 007/792] ASoC: Intel: haswell depends on sst-firmware The Intel Haswell audio support fails to link if CONFIG_SND_SOC_INTEL_SST_FIRMWARE is disabled: sst-haswell-dsp.c: undefined reference to `sst_mem_block_register' sst-haswell-dsp.c: undefined reference to `sst_mem_block_unregister_all' sst-haswell-dsp.c: undefined reference to `sst_module_alloc_blocks' sst-haswell-dsp.c: undefined reference to `sst_module_free' sst-haswell-dsp.c: undefined reference to `sst_module_new' sst-haswell-pcm.c: undefined reference to `sst_module_get_from_id' sst-haswell-pcm.c: undefined reference to `sst_module_runtime_restore' sst-haswell-pcm.c: undefined reference to `sst_module_runtime_save' ERROR: "sst_block_alloc_scratch" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_block_free_scratch" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_dsp_dma_copyfrom" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_dsp_dma_copyto" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_dsp_dma_get_channel" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_dsp_dma_put_channel" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_dsp_free" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_dsp_get_offset" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_dsp_new" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_fw_free_all" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_fw_new" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_fw_reload" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_fw_unload" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_module_runtime_alloc_blocks" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_module_runtime_get_from_id" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_module_runtime_new" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! This moves the 'select' statement from two of the three haswell based users into the line that is used by all of them, so make it harder to get wrong and to fix the existing randconfig regressions. Fixes: 2d995e5dc283 ("ASoC: Intel: boards: Add bdw-rt5677 machine driver") Signed-off-by: Arnd Bergmann Signed-off-by: Mark Brown --- sound/soc/intel/Kconfig | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/sound/soc/intel/Kconfig b/sound/soc/intel/Kconfig index a20c3dfbcb5d..54dec9161cef 100644 --- a/sound/soc/intel/Kconfig +++ b/sound/soc/intel/Kconfig @@ -46,6 +46,7 @@ config SND_SOC_INTEL_SST_MATCH config SND_SOC_INTEL_HASWELL tristate + select SND_SOC_INTEL_SST_FIRMWARE config SND_SOC_INTEL_BAYTRAIL tristate @@ -55,7 +56,6 @@ config SND_SOC_INTEL_HASWELL_MACH depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM depends on DW_DMAC_CORE select SND_SOC_INTEL_SST - select SND_SOC_INTEL_SST_FIRMWARE select SND_SOC_INTEL_HASWELL select SND_SOC_RT5640 help @@ -126,7 +126,6 @@ config SND_SOC_INTEL_BROADWELL_MACH I2C_DESIGNWARE_PLATFORM depends on DW_DMAC_CORE select SND_SOC_INTEL_SST - select SND_SOC_INTEL_SST_FIRMWARE select SND_SOC_INTEL_HASWELL select SND_SOC_RT286 help From aa5f920993bda2095952177eea79bc8e58ae6065 Mon Sep 17 00:00:00 2001 From: murray foster Date: Sun, 9 Oct 2016 13:28:45 -0700 Subject: [PATCH 008/792] ASoC: cs4270: fix DAPM stream name mismatch Mismatching stream names in DAPM route and widget definitions are causing compilation errors. Fixing these names allows the cs4270 driver to compile and function. [Errors must be at probe time not compile time -- broonie] Signed-off-by: Murray Foster Acked-by: Paul Handrigan Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/cs4270.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c index 18baea2f7d65..84f86745c30e 100644 --- a/sound/soc/codecs/cs4270.c +++ b/sound/soc/codecs/cs4270.c @@ -148,11 +148,11 @@ SND_SOC_DAPM_OUTPUT("AOUTR"), }; static const struct snd_soc_dapm_route cs4270_dapm_routes[] = { - { "Capture", NULL, "AINA" }, - { "Capture", NULL, "AINB" }, + { "Capture", NULL, "AINL" }, + { "Capture", NULL, "AINR" }, - { "AOUTA", NULL, "Playback" }, - { "AOUTB", NULL, "Playback" }, + { "AOUTL", NULL, "Playback" }, + { "AOUTR", NULL, "Playback" }, }; /** From c975e39ccadf6dc047356c60773a043a2293b8cd Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 13 Oct 2016 11:47:13 +0300 Subject: [PATCH 009/792] ASoC: rt5663: fix a debug statement We increment "i" before printing the debug statement. That makes it the wrong sleep_time[] information and Smatch complains that the last increment could be beyond the end of the array. Signed-off-by: Dan Carpenter Acked-by: Bard Liao Signed-off-by: Mark Brown --- sound/soc/codecs/rt5663.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/rt5663.c b/sound/soc/codecs/rt5663.c index 01a18d88f1eb..00ff2788879e 100644 --- a/sound/soc/codecs/rt5663.c +++ b/sound/soc/codecs/rt5663.c @@ -1547,11 +1547,11 @@ static int rt5663_jack_detect(struct snd_soc_codec *codec, int jack_insert) msleep(sleep_time[i]); val = snd_soc_read(codec, RT5663_EM_JACK_TYPE_2) & 0x0003; + dev_dbg(codec->dev, "%s: MX-00e7 val=%x sleep %d\n", + __func__, val, sleep_time[i]); i++; if (val == 0x1 || val == 0x2 || val == 0x3) break; - dev_dbg(codec->dev, "%s: MX-00e7 val=%x sleep %d\n", - __func__, val, sleep_time[i]); } dev_dbg(codec->dev, "%s val = %d\n", __func__, val); switch (val) { From c58b84ee467bfd08b39fbda56757ba19ac50980a Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 5 Oct 2016 06:46:49 -0300 Subject: [PATCH 010/792] [media] af9005: don't do DMA on stack The USB control messages require DMA to work. We cannot pass a stack-allocated buffer, as it is not warranted that the stack would be into a DMA enabled area. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/af9005.c | 317 ++++++++++++++++------------- 1 file changed, 180 insertions(+), 137 deletions(-) diff --git a/drivers/media/usb/dvb-usb/af9005.c b/drivers/media/usb/dvb-usb/af9005.c index efa782ed6e2d..b257780fb380 100644 --- a/drivers/media/usb/dvb-usb/af9005.c +++ b/drivers/media/usb/dvb-usb/af9005.c @@ -52,17 +52,16 @@ u8 regmask[8] = { 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f, 0x7f, 0xff }; struct af9005_device_state { u8 sequence; int led_state; + unsigned char data[256]; + struct mutex data_mutex; }; static int af9005_generic_read_write(struct dvb_usb_device *d, u16 reg, int readwrite, int type, u8 * values, int len) { struct af9005_device_state *st = d->priv; - u8 obuf[16] = { 0 }; - u8 ibuf[17] = { 0 }; - u8 command; - int i; - int ret; + u8 command, seq; + int i, ret; if (len < 1) { err("generic read/write, less than 1 byte. Makes no sense."); @@ -73,16 +72,17 @@ static int af9005_generic_read_write(struct dvb_usb_device *d, u16 reg, return -EINVAL; } - obuf[0] = 14; /* rest of buffer length low */ - obuf[1] = 0; /* rest of buffer length high */ + mutex_lock(&st->data_mutex); + st->data[0] = 14; /* rest of buffer length low */ + st->data[1] = 0; /* rest of buffer length high */ - obuf[2] = AF9005_REGISTER_RW; /* register operation */ - obuf[3] = 12; /* rest of buffer length */ + st->data[2] = AF9005_REGISTER_RW; /* register operation */ + st->data[3] = 12; /* rest of buffer length */ - obuf[4] = st->sequence++; /* sequence number */ + st->data[4] = seq = st->sequence++; /* sequence number */ - obuf[5] = (u8) (reg >> 8); /* register address */ - obuf[6] = (u8) (reg & 0xff); + st->data[5] = (u8) (reg >> 8); /* register address */ + st->data[6] = (u8) (reg & 0xff); if (type == AF9005_OFDM_REG) { command = AF9005_CMD_OFDM_REG; @@ -96,51 +96,52 @@ static int af9005_generic_read_write(struct dvb_usb_device *d, u16 reg, command |= readwrite; if (readwrite == AF9005_CMD_WRITE) for (i = 0; i < len; i++) - obuf[8 + i] = values[i]; + st->data[8 + i] = values[i]; else if (type == AF9005_TUNER_REG) /* read command for tuner, the first byte contains the i2c address */ - obuf[8] = values[0]; - obuf[7] = command; + st->data[8] = values[0]; + st->data[7] = command; - ret = dvb_usb_generic_rw(d, obuf, 16, ibuf, 17, 0); + ret = dvb_usb_generic_rw(d, st->data, 16, st->data, 17, 0); if (ret) - return ret; + goto ret; /* sanity check */ - if (ibuf[2] != AF9005_REGISTER_RW_ACK) { + if (st->data[2] != AF9005_REGISTER_RW_ACK) { err("generic read/write, wrong reply code."); - return -EIO; + ret = -EIO; + goto ret; } - if (ibuf[3] != 0x0d) { + if (st->data[3] != 0x0d) { err("generic read/write, wrong length in reply."); - return -EIO; + ret = -EIO; + goto ret; } - if (ibuf[4] != obuf[4]) { + if (st->data[4] != seq) { err("generic read/write, wrong sequence in reply."); - return -EIO; + ret = -EIO; + goto ret; } /* - Windows driver doesn't check these fields, in fact sometimes - the register in the reply is different that what has been sent - - if (ibuf[5] != obuf[5] || ibuf[6] != obuf[6]) { - err("generic read/write, wrong register in reply."); - return -EIO; - } - if (ibuf[7] != command) { - err("generic read/write wrong command in reply."); - return -EIO; - } + * In thesis, both input and output buffers should have + * identical values for st->data[5] to st->data[8]. + * However, windows driver doesn't check these fields, in fact + * sometimes the register in the reply is different that what + * has been sent */ - if (ibuf[16] != 0x01) { + if (st->data[16] != 0x01) { err("generic read/write wrong status code in reply."); - return -EIO; + ret = -EIO; + goto ret; } + if (readwrite == AF9005_CMD_READ) for (i = 0; i < len; i++) - values[i] = ibuf[8 + i]; + values[i] = st->data[8 + i]; - return 0; +ret: + mutex_unlock(&st->data_mutex); + return ret; } @@ -464,8 +465,7 @@ int af9005_send_command(struct dvb_usb_device *d, u8 command, u8 * wbuf, struct af9005_device_state *st = d->priv; int ret, i, packet_len; - u8 buf[64]; - u8 ibuf[64]; + u8 seq; if (wlen < 0) { err("send command, wlen less than 0 bytes. Makes no sense."); @@ -480,94 +480,97 @@ int af9005_send_command(struct dvb_usb_device *d, u8 command, u8 * wbuf, return -EINVAL; } packet_len = wlen + 5; - buf[0] = (u8) (packet_len & 0xff); - buf[1] = (u8) ((packet_len & 0xff00) >> 8); - buf[2] = 0x26; /* packet type */ - buf[3] = wlen + 3; - buf[4] = st->sequence++; - buf[5] = command; - buf[6] = wlen; + mutex_lock(&st->data_mutex); + + st->data[0] = (u8) (packet_len & 0xff); + st->data[1] = (u8) ((packet_len & 0xff00) >> 8); + + st->data[2] = 0x26; /* packet type */ + st->data[3] = wlen + 3; + st->data[4] = seq = st->sequence++; + st->data[5] = command; + st->data[6] = wlen; for (i = 0; i < wlen; i++) - buf[7 + i] = wbuf[i]; - ret = dvb_usb_generic_rw(d, buf, wlen + 7, ibuf, rlen + 7, 0); - if (ret) - return ret; - if (ibuf[2] != 0x27) { + st->data[7 + i] = wbuf[i]; + ret = dvb_usb_generic_rw(d, st->data, wlen + 7, st->data, rlen + 7, 0); + if (st->data[2] != 0x27) { err("send command, wrong reply code."); - return -EIO; - } - if (ibuf[4] != buf[4]) { + ret = -EIO; + } else if (st->data[4] != seq) { err("send command, wrong sequence in reply."); - return -EIO; - } - if (ibuf[5] != 0x01) { + ret = -EIO; + } else if (st->data[5] != 0x01) { err("send command, wrong status code in reply."); - return -EIO; - } - if (ibuf[6] != rlen) { + ret = -EIO; + } else if (st->data[6] != rlen) { err("send command, invalid data length in reply."); - return -EIO; + ret = -EIO; } - for (i = 0; i < rlen; i++) - rbuf[i] = ibuf[i + 7]; - return 0; + if (!ret) { + for (i = 0; i < rlen; i++) + rbuf[i] = st->data[i + 7]; + } + + mutex_unlock(&st->data_mutex); + return ret; } int af9005_read_eeprom(struct dvb_usb_device *d, u8 address, u8 * values, int len) { struct af9005_device_state *st = d->priv; - u8 obuf[16], ibuf[14]; + u8 seq; int ret, i; - memset(obuf, 0, sizeof(obuf)); - memset(ibuf, 0, sizeof(ibuf)); + mutex_lock(&st->data_mutex); - obuf[0] = 14; /* length of rest of packet low */ - obuf[1] = 0; /* length of rest of packer high */ + memset(st->data, 0, sizeof(st->data)); - obuf[2] = 0x2a; /* read/write eeprom */ + st->data[0] = 14; /* length of rest of packet low */ + st->data[1] = 0; /* length of rest of packer high */ - obuf[3] = 12; /* size */ + st->data[2] = 0x2a; /* read/write eeprom */ - obuf[4] = st->sequence++; + st->data[3] = 12; /* size */ - obuf[5] = 0; /* read */ + st->data[4] = seq = st->sequence++; - obuf[6] = len; - obuf[7] = address; - ret = dvb_usb_generic_rw(d, obuf, 16, ibuf, 14, 0); - if (ret) - return ret; - if (ibuf[2] != 0x2b) { + st->data[5] = 0; /* read */ + + st->data[6] = len; + st->data[7] = address; + ret = dvb_usb_generic_rw(d, st->data, 16, st->data, 14, 0); + if (st->data[2] != 0x2b) { err("Read eeprom, invalid reply code"); - return -EIO; - } - if (ibuf[3] != 10) { + ret = -EIO; + } else if (st->data[3] != 10) { err("Read eeprom, invalid reply length"); - return -EIO; - } - if (ibuf[4] != obuf[4]) { + ret = -EIO; + } else if (st->data[4] != seq) { err("Read eeprom, wrong sequence in reply "); - return -EIO; - } - if (ibuf[5] != 1) { + ret = -EIO; + } else if (st->data[5] != 1) { err("Read eeprom, wrong status in reply "); - return -EIO; + ret = -EIO; } - for (i = 0; i < len; i++) { - values[i] = ibuf[6 + i]; + + if (!ret) { + for (i = 0; i < len; i++) + values[i] = st->data[6 + i]; } - return 0; + mutex_unlock(&st->data_mutex); + + return ret; } -static int af9005_boot_packet(struct usb_device *udev, int type, u8 * reply) +static int af9005_boot_packet(struct usb_device *udev, int type, u8 *reply, + u8 *buf, int size) { - u8 buf[FW_BULKOUT_SIZE + 2]; u16 checksum; int act_len, i, ret; - memset(buf, 0, sizeof(buf)); + + memset(buf, 0, size); buf[0] = (u8) (FW_BULKOUT_SIZE & 0xff); buf[1] = (u8) ((FW_BULKOUT_SIZE >> 8) & 0xff); switch (type) { @@ -720,15 +723,21 @@ static int af9005_download_firmware(struct usb_device *udev, const struct firmwa { int i, packets, ret, act_len; - u8 buf[FW_BULKOUT_SIZE + 2]; + u8 *buf; u8 reply; - ret = af9005_boot_packet(udev, FW_CONFIG, &reply); + buf = kmalloc(FW_BULKOUT_SIZE + 2, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + ret = af9005_boot_packet(udev, FW_CONFIG, &reply, buf, + FW_BULKOUT_SIZE + 2); if (ret) - return ret; + goto err; if (reply != 0x01) { err("before downloading firmware, FW_CONFIG expected 0x01, received 0x%x", reply); - return -EIO; + ret = -EIO; + goto err; } packets = fw->size / FW_BULKOUT_SIZE; buf[0] = (u8) (FW_BULKOUT_SIZE & 0xff); @@ -743,28 +752,35 @@ static int af9005_download_firmware(struct usb_device *udev, const struct firmwa buf, FW_BULKOUT_SIZE + 2, &act_len, 1000); if (ret) { err("firmware download failed at packet %d with code %d", i, ret); - return ret; + goto err; } } - ret = af9005_boot_packet(udev, FW_CONFIRM, &reply); + ret = af9005_boot_packet(udev, FW_CONFIRM, &reply, + buf, FW_BULKOUT_SIZE + 2); if (ret) - return ret; + goto err; if (reply != (u8) (packets & 0xff)) { err("after downloading firmware, FW_CONFIRM expected 0x%x, received 0x%x", packets & 0xff, reply); - return -EIO; + ret = -EIO; + goto err; } - ret = af9005_boot_packet(udev, FW_BOOT, &reply); + ret = af9005_boot_packet(udev, FW_BOOT, &reply, buf, + FW_BULKOUT_SIZE + 2); if (ret) - return ret; - ret = af9005_boot_packet(udev, FW_CONFIG, &reply); + goto err; + ret = af9005_boot_packet(udev, FW_CONFIG, &reply, buf, + FW_BULKOUT_SIZE + 2); if (ret) - return ret; + goto err; if (reply != 0x02) { err("after downloading firmware, FW_CONFIG expected 0x02, received 0x%x", reply); - return -EIO; + ret = -EIO; + goto err; } - return 0; +err: + kfree(buf); + return ret; } @@ -823,53 +839,59 @@ static int af9005_rc_query(struct dvb_usb_device *d, u32 * event, int *state) { struct af9005_device_state *st = d->priv; int ret, len; - - u8 obuf[5]; - u8 ibuf[256]; + u8 seq; *state = REMOTE_NO_KEY_PRESSED; if (rc_decode == NULL) { /* it shouldn't never come here */ return 0; } + + mutex_lock(&st->data_mutex); + /* deb_info("rc_query\n"); */ - obuf[0] = 3; /* rest of packet length low */ - obuf[1] = 0; /* rest of packet lentgh high */ - obuf[2] = 0x40; /* read remote */ - obuf[3] = 1; /* rest of packet length */ - obuf[4] = st->sequence++; /* sequence number */ - ret = dvb_usb_generic_rw(d, obuf, 5, ibuf, 256, 0); + st->data[0] = 3; /* rest of packet length low */ + st->data[1] = 0; /* rest of packet lentgh high */ + st->data[2] = 0x40; /* read remote */ + st->data[3] = 1; /* rest of packet length */ + st->data[4] = seq = st->sequence++; /* sequence number */ + ret = dvb_usb_generic_rw(d, st->data, 5, st->data, 256, 0); if (ret) { err("rc query failed"); - return ret; + goto ret; } - if (ibuf[2] != 0x41) { + if (st->data[2] != 0x41) { err("rc query bad header."); - return -EIO; - } - if (ibuf[4] != obuf[4]) { + ret = -EIO; + goto ret; + } else if (st->data[4] != seq) { err("rc query bad sequence."); - return -EIO; + ret = -EIO; + goto ret; } - len = ibuf[5]; + len = st->data[5]; if (len > 246) { err("rc query invalid length"); - return -EIO; + ret = -EIO; + goto ret; } if (len > 0) { deb_rc("rc data (%d) ", len); - debug_dump((ibuf + 6), len, deb_rc); - ret = rc_decode(d, &ibuf[6], len, event, state); + debug_dump((st->data + 6), len, deb_rc); + ret = rc_decode(d, &st->data[6], len, event, state); if (ret) { err("rc_decode failed"); - return ret; + goto ret; } else { deb_rc("rc_decode state %x event %x\n", *state, *event); if (*state == REMOTE_KEY_REPEAT) *event = d->last_event; } } - return 0; + +ret: + mutex_unlock(&st->data_mutex); + return ret; } static int af9005_power_ctrl(struct dvb_usb_device *d, int onoff) @@ -953,10 +975,16 @@ static int af9005_identify_state(struct usb_device *udev, int *cold) { int ret; - u8 reply; - ret = af9005_boot_packet(udev, FW_CONFIG, &reply); + u8 reply, *buf; + + buf = kmalloc(FW_BULKOUT_SIZE + 2, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + ret = af9005_boot_packet(udev, FW_CONFIG, &reply, + buf, FW_BULKOUT_SIZE + 2); if (ret) - return ret; + goto err; deb_info("result of FW_CONFIG in identify state %d\n", reply); if (reply == 0x01) *cold = 1; @@ -965,7 +993,10 @@ static int af9005_identify_state(struct usb_device *udev, else return -EIO; deb_info("Identify state cold = %d\n", *cold); - return 0; + +err: + kfree(buf); + return ret; } static struct dvb_usb_device_properties af9005_properties; @@ -973,8 +1004,20 @@ static struct dvb_usb_device_properties af9005_properties; static int af9005_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) { - return dvb_usb_device_init(intf, &af9005_properties, - THIS_MODULE, NULL, adapter_nr); + struct dvb_usb_device *d; + struct af9005_device_state *st; + int ret; + + ret = dvb_usb_device_init(intf, &af9005_properties, + THIS_MODULE, &d, adapter_nr); + + if (ret < 0) + return ret; + + st = d->priv; + mutex_init(&st->data_mutex); + + return 0; } enum af9005_usb_table_entry { From 5ef8ed0e5608f75805e41ef8abbe94a3597e6613 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 5 Oct 2016 06:02:19 -0300 Subject: [PATCH 011/792] [media] cinergyT2-core: don't do DMA on stack The USB control messages require DMA to work. We cannot pass a stack-allocated buffer, as it is not warranted that the stack would be into a DMA enabled area. Reviewed-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/cinergyT2-core.c | 84 ++++++++++++++++------ 1 file changed, 61 insertions(+), 23 deletions(-) diff --git a/drivers/media/usb/dvb-usb/cinergyT2-core.c b/drivers/media/usb/dvb-usb/cinergyT2-core.c index 9fd1527494eb..d85c0c4d4042 100644 --- a/drivers/media/usb/dvb-usb/cinergyT2-core.c +++ b/drivers/media/usb/dvb-usb/cinergyT2-core.c @@ -41,6 +41,8 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); struct cinergyt2_state { u8 rc_counter; + unsigned char data[64]; + struct mutex data_mutex; }; /* We are missing a release hook with usb_device data */ @@ -50,33 +52,52 @@ static struct dvb_usb_device_properties cinergyt2_properties; static int cinergyt2_streaming_ctrl(struct dvb_usb_adapter *adap, int enable) { - char buf[] = { CINERGYT2_EP1_CONTROL_STREAM_TRANSFER, enable ? 1 : 0 }; - char result[64]; - return dvb_usb_generic_rw(adap->dev, buf, sizeof(buf), result, - sizeof(result), 0); + struct dvb_usb_device *d = adap->dev; + struct cinergyt2_state *st = d->priv; + int ret; + + mutex_lock(&st->data_mutex); + st->data[0] = CINERGYT2_EP1_CONTROL_STREAM_TRANSFER; + st->data[1] = enable ? 1 : 0; + + ret = dvb_usb_generic_rw(d, st->data, 2, st->data, 64, 0); + mutex_unlock(&st->data_mutex); + + return ret; } static int cinergyt2_power_ctrl(struct dvb_usb_device *d, int enable) { - char buf[] = { CINERGYT2_EP1_SLEEP_MODE, enable ? 0 : 1 }; - char state[3]; - return dvb_usb_generic_rw(d, buf, sizeof(buf), state, sizeof(state), 0); + struct cinergyt2_state *st = d->priv; + int ret; + + mutex_lock(&st->data_mutex); + st->data[0] = CINERGYT2_EP1_SLEEP_MODE; + st->data[1] = enable ? 0 : 1; + + ret = dvb_usb_generic_rw(d, st->data, 2, st->data, 3, 0); + mutex_unlock(&st->data_mutex); + + return ret; } static int cinergyt2_frontend_attach(struct dvb_usb_adapter *adap) { - char query[] = { CINERGYT2_EP1_GET_FIRMWARE_VERSION }; - char state[3]; + struct dvb_usb_device *d = adap->dev; + struct cinergyt2_state *st = d->priv; int ret; adap->fe_adap[0].fe = cinergyt2_fe_attach(adap->dev); - ret = dvb_usb_generic_rw(adap->dev, query, sizeof(query), state, - sizeof(state), 0); + mutex_lock(&st->data_mutex); + st->data[0] = CINERGYT2_EP1_GET_FIRMWARE_VERSION; + + ret = dvb_usb_generic_rw(d, st->data, 1, st->data, 3, 0); if (ret < 0) { deb_rc("cinergyt2_power_ctrl() Failed to retrieve sleep " "state info\n"); } + mutex_unlock(&st->data_mutex); /* Copy this pointer as we are gonna need it in the release phase */ cinergyt2_usb_device = adap->dev; @@ -141,13 +162,16 @@ static int repeatable_keys[] = { static int cinergyt2_rc_query(struct dvb_usb_device *d, u32 *event, int *state) { struct cinergyt2_state *st = d->priv; - u8 key[5] = {0, 0, 0, 0, 0}, cmd = CINERGYT2_EP1_GET_RC_EVENTS; int i; *state = REMOTE_NO_KEY_PRESSED; - dvb_usb_generic_rw(d, &cmd, 1, key, sizeof(key), 0); - if (key[4] == 0xff) { + mutex_lock(&st->data_mutex); + st->data[0] = CINERGYT2_EP1_GET_RC_EVENTS; + + dvb_usb_generic_rw(d, st->data, 1, st->data, 5, 0); + + if (st->data[4] == 0xff) { /* key repeat */ st->rc_counter++; if (st->rc_counter > RC_REPEAT_DELAY) { @@ -157,31 +181,45 @@ static int cinergyt2_rc_query(struct dvb_usb_device *d, u32 *event, int *state) *event = d->last_event; deb_rc("repeat key, event %x\n", *event); - return 0; + goto ret; } } deb_rc("repeated key (non repeatable)\n"); } - return 0; + goto ret; } /* hack to pass checksum on the custom field */ - key[2] = ~key[1]; - dvb_usb_nec_rc_key_to_event(d, key, event, state); - if (key[0] != 0) { + st->data[2] = ~st->data[1]; + dvb_usb_nec_rc_key_to_event(d, st->data, event, state); + if (st->data[0] != 0) { if (*event != d->last_event) st->rc_counter = 0; - deb_rc("key: %*ph\n", 5, key); + deb_rc("key: %*ph\n", 5, st->data); } - return 0; + +ret: + mutex_unlock(&st->data_mutex); + return ret; } static int cinergyt2_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) { - return dvb_usb_device_init(intf, &cinergyt2_properties, - THIS_MODULE, NULL, adapter_nr); + struct dvb_usb_device *d; + struct cinergyt2_state *st; + int ret; + + ret = dvb_usb_device_init(intf, &cinergyt2_properties, + THIS_MODULE, &d, adapter_nr); + if (ret < 0) + return ret; + + st = d->priv; + mutex_init(&st->data_mutex); + + return 0; } From 54d577a4c91ba5dfe634ddee26223bc9a39687a7 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Oct 2016 13:54:33 -0300 Subject: [PATCH 012/792] [media] cinergyT2-core: handle error code on RC query There's no sense on decoding and generating a RC key code if there was an error on the URB control message. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/cinergyT2-core.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/media/usb/dvb-usb/cinergyT2-core.c b/drivers/media/usb/dvb-usb/cinergyT2-core.c index d85c0c4d4042..8ac825413d5a 100644 --- a/drivers/media/usb/dvb-usb/cinergyT2-core.c +++ b/drivers/media/usb/dvb-usb/cinergyT2-core.c @@ -102,7 +102,7 @@ static int cinergyt2_frontend_attach(struct dvb_usb_adapter *adap) /* Copy this pointer as we are gonna need it in the release phase */ cinergyt2_usb_device = adap->dev; - return 0; + return ret; } static struct rc_map_table rc_map_cinergyt2_table[] = { @@ -162,14 +162,16 @@ static int repeatable_keys[] = { static int cinergyt2_rc_query(struct dvb_usb_device *d, u32 *event, int *state) { struct cinergyt2_state *st = d->priv; - int i; + int i, ret; *state = REMOTE_NO_KEY_PRESSED; mutex_lock(&st->data_mutex); st->data[0] = CINERGYT2_EP1_GET_RC_EVENTS; - dvb_usb_generic_rw(d, st->data, 1, st->data, 5, 0); + ret = dvb_usb_generic_rw(d, st->data, 1, st->data, 5, 0); + if (ret < 0) + goto ret; if (st->data[4] == 0xff) { /* key repeat */ From c2730eef5fa180eec853f3775bebc4d74e6e6697 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Oct 2016 06:07:36 -0300 Subject: [PATCH 013/792] [media] cinergyT2-fe: cache stats at cinergyt2_fe_read_status() Instead of sending USB commands for every stats call, collect them once, when status is updated. As the frontend kthread will call it on every few seconds, the stats will still be collected. Besides reducing the amount of USB/I2C transfers, this also warrants that all stats will be collected at the same time, and makes easier to convert it to DVBv5 stats in the future. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/cinergyT2-fe.c | 48 ++++-------------------- 1 file changed, 7 insertions(+), 41 deletions(-) diff --git a/drivers/media/usb/dvb-usb/cinergyT2-fe.c b/drivers/media/usb/dvb-usb/cinergyT2-fe.c index b3ec743a7a2e..fd8edcb56e61 100644 --- a/drivers/media/usb/dvb-usb/cinergyT2-fe.c +++ b/drivers/media/usb/dvb-usb/cinergyT2-fe.c @@ -139,6 +139,7 @@ static uint16_t compute_tps(struct dtv_frontend_properties *op) struct cinergyt2_fe_state { struct dvb_frontend fe; struct dvb_usb_device *d; + struct dvbt_get_status_msg status; }; static int cinergyt2_fe_read_status(struct dvb_frontend *fe, @@ -154,6 +155,8 @@ static int cinergyt2_fe_read_status(struct dvb_frontend *fe, if (ret < 0) return ret; + state->status = result; + *status = 0; if (0xffff - le16_to_cpu(result.gain) > 30) @@ -177,34 +180,16 @@ static int cinergyt2_fe_read_status(struct dvb_frontend *fe, static int cinergyt2_fe_read_ber(struct dvb_frontend *fe, u32 *ber) { struct cinergyt2_fe_state *state = fe->demodulator_priv; - struct dvbt_get_status_msg status; - char cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS }; - int ret; - ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (char *)&status, - sizeof(status), 0); - if (ret < 0) - return ret; - - *ber = le32_to_cpu(status.viterbi_error_rate); + *ber = le32_to_cpu(state->status.viterbi_error_rate); return 0; } static int cinergyt2_fe_read_unc_blocks(struct dvb_frontend *fe, u32 *unc) { struct cinergyt2_fe_state *state = fe->demodulator_priv; - struct dvbt_get_status_msg status; - u8 cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS }; - int ret; - ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (u8 *)&status, - sizeof(status), 0); - if (ret < 0) { - err("cinergyt2_fe_read_unc_blocks() Failed! (Error=%d)\n", - ret); - return ret; - } - *unc = le32_to_cpu(status.uncorrected_block_count); + *unc = le32_to_cpu(state->status.uncorrected_block_count); return 0; } @@ -212,35 +197,16 @@ static int cinergyt2_fe_read_signal_strength(struct dvb_frontend *fe, u16 *strength) { struct cinergyt2_fe_state *state = fe->demodulator_priv; - struct dvbt_get_status_msg status; - char cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS }; - int ret; - ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (char *)&status, - sizeof(status), 0); - if (ret < 0) { - err("cinergyt2_fe_read_signal_strength() Failed!" - " (Error=%d)\n", ret); - return ret; - } - *strength = (0xffff - le16_to_cpu(status.gain)); + *strength = (0xffff - le16_to_cpu(state->status.gain)); return 0; } static int cinergyt2_fe_read_snr(struct dvb_frontend *fe, u16 *snr) { struct cinergyt2_fe_state *state = fe->demodulator_priv; - struct dvbt_get_status_msg status; - char cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS }; - int ret; - ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (char *)&status, - sizeof(status), 0); - if (ret < 0) { - err("cinergyt2_fe_read_snr() Failed! (Error=%d)\n", ret); - return ret; - } - *snr = (status.snr << 8) | status.snr; + *snr = (state->status.snr << 8) | state->status.snr; return 0; } From 0d43c0ff8b7e0a76136c602625efa5e6919baf9c Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Oct 2016 06:16:59 -0300 Subject: [PATCH 014/792] [media] cinergyT2-fe: don't do DMA on stack The USB control messages require DMA to work. We cannot pass a stack-allocated buffer, as it is not warranted that the stack would be into a DMA enabled area. Reviewed-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/cinergyT2-fe.c | 56 ++++++++++++++---------- 1 file changed, 33 insertions(+), 23 deletions(-) diff --git a/drivers/media/usb/dvb-usb/cinergyT2-fe.c b/drivers/media/usb/dvb-usb/cinergyT2-fe.c index fd8edcb56e61..2d29b4174dba 100644 --- a/drivers/media/usb/dvb-usb/cinergyT2-fe.c +++ b/drivers/media/usb/dvb-usb/cinergyT2-fe.c @@ -139,6 +139,10 @@ static uint16_t compute_tps(struct dtv_frontend_properties *op) struct cinergyt2_fe_state { struct dvb_frontend fe; struct dvb_usb_device *d; + + unsigned char data[64]; + struct mutex data_mutex; + struct dvbt_get_status_msg status; }; @@ -146,28 +150,31 @@ static int cinergyt2_fe_read_status(struct dvb_frontend *fe, enum fe_status *status) { struct cinergyt2_fe_state *state = fe->demodulator_priv; - struct dvbt_get_status_msg result; - u8 cmd[] = { CINERGYT2_EP1_GET_TUNER_STATUS }; int ret; - ret = dvb_usb_generic_rw(state->d, cmd, sizeof(cmd), (u8 *)&result, - sizeof(result), 0); + mutex_lock(&state->data_mutex); + state->data[0] = CINERGYT2_EP1_GET_TUNER_STATUS; + + ret = dvb_usb_generic_rw(state->d, state->data, 1, + state->data, sizeof(state->status), 0); + if (!ret) + memcpy(&state->status, state->data, sizeof(state->status)); + mutex_unlock(&state->data_mutex); + if (ret < 0) return ret; - state->status = result; - *status = 0; - if (0xffff - le16_to_cpu(result.gain) > 30) + if (0xffff - le16_to_cpu(state->status.gain) > 30) *status |= FE_HAS_SIGNAL; - if (result.lock_bits & (1 << 6)) + if (state->status.lock_bits & (1 << 6)) *status |= FE_HAS_LOCK; - if (result.lock_bits & (1 << 5)) + if (state->status.lock_bits & (1 << 5)) *status |= FE_HAS_SYNC; - if (result.lock_bits & (1 << 4)) + if (state->status.lock_bits & (1 << 4)) *status |= FE_HAS_CARRIER; - if (result.lock_bits & (1 << 1)) + if (state->status.lock_bits & (1 << 1)) *status |= FE_HAS_VITERBI; if ((*status & (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) != @@ -232,34 +239,36 @@ static int cinergyt2_fe_set_frontend(struct dvb_frontend *fe) { struct dtv_frontend_properties *fep = &fe->dtv_property_cache; struct cinergyt2_fe_state *state = fe->demodulator_priv; - struct dvbt_set_parameters_msg param; - char result[2]; + struct dvbt_set_parameters_msg *param; int err; - param.cmd = CINERGYT2_EP1_SET_TUNER_PARAMETERS; - param.tps = cpu_to_le16(compute_tps(fep)); - param.freq = cpu_to_le32(fep->frequency / 1000); - param.flags = 0; + mutex_lock(&state->data_mutex); + + param = (void *)state->data; + param->cmd = CINERGYT2_EP1_SET_TUNER_PARAMETERS; + param->tps = cpu_to_le16(compute_tps(fep)); + param->freq = cpu_to_le32(fep->frequency / 1000); + param->flags = 0; switch (fep->bandwidth_hz) { default: case 8000000: - param.bandwidth = 8; + param->bandwidth = 8; break; case 7000000: - param.bandwidth = 7; + param->bandwidth = 7; break; case 6000000: - param.bandwidth = 6; + param->bandwidth = 6; break; } - err = dvb_usb_generic_rw(state->d, - (char *)¶m, sizeof(param), - result, sizeof(result), 0); + err = dvb_usb_generic_rw(state->d, state->data, sizeof(*param), + state->data, 2, 0); if (err < 0) err("cinergyt2_fe_set_frontend() Failed! err=%d\n", err); + mutex_unlock(&state->data_mutex); return (err < 0) ? err : 0; } @@ -281,6 +290,7 @@ struct dvb_frontend *cinergyt2_fe_attach(struct dvb_usb_device *d) s->d = d; memcpy(&s->fe.ops, &cinergyt2_fe_ops, sizeof(struct dvb_frontend_ops)); s->fe.demodulator_priv = s; + mutex_init(&s->data_mutex); return &s->fe; } From 17ce039b4e5405c49d8c0d64e6d781cc6f4dc1ac Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Oct 2016 06:30:27 -0300 Subject: [PATCH 015/792] [media] cxusb: don't do DMA on stack The USB control messages require DMA to work. We cannot pass a stack-allocated buffer, as it is not warranted that the stack would be into a DMA enabled area. Reviewed-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/cxusb.c | 62 +++++++++++++++++-------------- drivers/media/usb/dvb-usb/cxusb.h | 6 +++ 2 files changed, 41 insertions(+), 27 deletions(-) diff --git a/drivers/media/usb/dvb-usb/cxusb.c b/drivers/media/usb/dvb-usb/cxusb.c index 907ac01ae297..39772812269d 100644 --- a/drivers/media/usb/dvb-usb/cxusb.c +++ b/drivers/media/usb/dvb-usb/cxusb.c @@ -45,9 +45,6 @@ #include "si2168.h" #include "si2157.h" -/* Max transfer size done by I2C transfer functions */ -#define MAX_XFER_SIZE 80 - /* debug */ static int dvb_usb_cxusb_debug; module_param_named(debug, dvb_usb_cxusb_debug, int, 0644); @@ -61,23 +58,27 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); static int cxusb_ctrl_msg(struct dvb_usb_device *d, u8 cmd, u8 *wbuf, int wlen, u8 *rbuf, int rlen) { - int wo = (rbuf == NULL || rlen == 0); /* write-only */ - u8 sndbuf[MAX_XFER_SIZE]; + struct cxusb_state *st = d->priv; + int ret, wo; - if (1 + wlen > sizeof(sndbuf)) { - warn("i2c wr: len=%d is too big!\n", - wlen); + if (1 + wlen > MAX_XFER_SIZE) { + warn("i2c wr: len=%d is too big!\n", wlen); return -EOPNOTSUPP; } - memset(sndbuf, 0, 1+wlen); + wo = (rbuf == NULL || rlen == 0); /* write-only */ - sndbuf[0] = cmd; - memcpy(&sndbuf[1], wbuf, wlen); + mutex_lock(&st->data_mutex); + st->data[0] = cmd; + memcpy(&st->data[1], wbuf, wlen); if (wo) - return dvb_usb_generic_write(d, sndbuf, 1+wlen); + ret = dvb_usb_generic_write(d, st->data, 1 + wlen); else - return dvb_usb_generic_rw(d, sndbuf, 1+wlen, rbuf, rlen, 0); + ret = dvb_usb_generic_rw(d, st->data, 1 + wlen, + rbuf, rlen, 0); + + mutex_unlock(&st->data_mutex); + return ret; } /* GPIO */ @@ -1460,36 +1461,43 @@ static struct dvb_usb_device_properties cxusb_mygica_t230_properties; static int cxusb_probe(struct usb_interface *intf, const struct usb_device_id *id) { + struct dvb_usb_device *d; + struct cxusb_state *st; + if (0 == dvb_usb_device_init(intf, &cxusb_medion_properties, - THIS_MODULE, NULL, adapter_nr) || + THIS_MODULE, &d, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_bluebird_lgh064f_properties, - THIS_MODULE, NULL, adapter_nr) || + THIS_MODULE, &d, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_bluebird_dee1601_properties, - THIS_MODULE, NULL, adapter_nr) || + THIS_MODULE, &d, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_bluebird_lgz201_properties, - THIS_MODULE, NULL, adapter_nr) || + THIS_MODULE, &d, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_bluebird_dtt7579_properties, - THIS_MODULE, NULL, adapter_nr) || + THIS_MODULE, &d, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_bluebird_dualdig4_properties, - THIS_MODULE, NULL, adapter_nr) || + THIS_MODULE, &d, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_bluebird_nano2_properties, - THIS_MODULE, NULL, adapter_nr) || + THIS_MODULE, &d, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_bluebird_nano2_needsfirmware_properties, - THIS_MODULE, NULL, adapter_nr) || + THIS_MODULE, &d, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_aver_a868r_properties, - THIS_MODULE, NULL, adapter_nr) || + THIS_MODULE, &d, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_bluebird_dualdig4_rev2_properties, - THIS_MODULE, NULL, adapter_nr) || + THIS_MODULE, &d, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_d680_dmb_properties, - THIS_MODULE, NULL, adapter_nr) || + THIS_MODULE, &d, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_mygica_d689_properties, - THIS_MODULE, NULL, adapter_nr) || + THIS_MODULE, &d, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_mygica_t230_properties, - THIS_MODULE, NULL, adapter_nr) || - 0) + THIS_MODULE, &d, adapter_nr) || + 0) { + st = d->priv; + mutex_init(&st->data_mutex); + return 0; + } return -EINVAL; } diff --git a/drivers/media/usb/dvb-usb/cxusb.h b/drivers/media/usb/dvb-usb/cxusb.h index 527ff7905e15..9f3ee0e47d5c 100644 --- a/drivers/media/usb/dvb-usb/cxusb.h +++ b/drivers/media/usb/dvb-usb/cxusb.h @@ -28,10 +28,16 @@ #define CMD_ANALOG 0x50 #define CMD_DIGITAL 0x51 +/* Max transfer size done by I2C transfer functions */ +#define MAX_XFER_SIZE 80 + struct cxusb_state { u8 gpio_write_state[3]; struct i2c_client *i2c_client_demod; struct i2c_client *i2c_client_tuner; + + unsigned char data[MAX_XFER_SIZE]; + struct mutex data_mutex; }; #endif From bd1f976cc95b0689f889c8d93434ee61dd09b08b Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Oct 2016 06:40:24 -0300 Subject: [PATCH 016/792] [media] dib0700: be sure that dib0700_ctrl_rd() users can do DMA dib0700_ctrl_rd() takes a RX and a TX pointer. Be sure that both will point to a memory allocated via kmalloc(). Reviewed-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/dib0700_core.c | 4 +++- drivers/media/usb/dvb-usb/dib0700_devices.c | 25 +++++++++++---------- 2 files changed, 16 insertions(+), 13 deletions(-) diff --git a/drivers/media/usb/dvb-usb/dib0700_core.c b/drivers/media/usb/dvb-usb/dib0700_core.c index f3196658fb70..515f89dba199 100644 --- a/drivers/media/usb/dvb-usb/dib0700_core.c +++ b/drivers/media/usb/dvb-usb/dib0700_core.c @@ -292,13 +292,15 @@ static int dib0700_i2c_xfer_legacy(struct i2c_adapter *adap, /* special thing in the current firmware: when length is zero the read-failed */ len = dib0700_ctrl_rd(d, st->buf, msg[i].len + 2, - msg[i+1].buf, msg[i+1].len); + st->buf, msg[i + 1].len); if (len <= 0) { deb_info("I2C read failed on address 0x%02x\n", msg[i].addr); break; } + memcpy(msg[i + 1].buf, st->buf, msg[i + 1].len); + msg[i+1].len = len; i++; diff --git a/drivers/media/usb/dvb-usb/dib0700_devices.c b/drivers/media/usb/dvb-usb/dib0700_devices.c index 0857b56e652c..ef1b8ee75c57 100644 --- a/drivers/media/usb/dvb-usb/dib0700_devices.c +++ b/drivers/media/usb/dvb-usb/dib0700_devices.c @@ -508,8 +508,6 @@ static int stk7700ph_tuner_attach(struct dvb_usb_adapter *adap) #define DEFAULT_RC_INTERVAL 50 -static u8 rc_request[] = { REQUEST_POLL_RC, 0 }; - /* * This function is used only when firmware is < 1.20 version. Newer * firmwares use bulk mode, with functions implemented at dib0700_core, @@ -517,7 +515,6 @@ static u8 rc_request[] = { REQUEST_POLL_RC, 0 }; */ static int dib0700_rc_query_old_firmware(struct dvb_usb_device *d) { - u8 key[4]; enum rc_type protocol; u32 scancode; u8 toggle; @@ -532,39 +529,43 @@ static int dib0700_rc_query_old_firmware(struct dvb_usb_device *d) return 0; } - i = dib0700_ctrl_rd(d, rc_request, 2, key, 4); + st->buf[0] = REQUEST_POLL_RC; + st->buf[1] = 0; + + i = dib0700_ctrl_rd(d, st->buf, 2, st->buf, 4); if (i <= 0) { err("RC Query Failed"); - return -1; + return -EIO; } /* losing half of KEY_0 events from Philipps rc5 remotes.. */ - if (key[0] == 0 && key[1] == 0 && key[2] == 0 && key[3] == 0) + if (st->buf[0] == 0 && st->buf[1] == 0 + && st->buf[2] == 0 && st->buf[3] == 0) return 0; - /* info("%d: %2X %2X %2X %2X",dvb_usb_dib0700_ir_proto,(int)key[3-2],(int)key[3-3],(int)key[3-1],(int)key[3]); */ + /* info("%d: %2X %2X %2X %2X",dvb_usb_dib0700_ir_proto,(int)st->buf[3 - 2],(int)st->buf[3 - 3],(int)st->buf[3 - 1],(int)st->buf[3]); */ dib0700_rc_setup(d, NULL); /* reset ir sensor data to prevent false events */ switch (d->props.rc.core.protocol) { case RC_BIT_NEC: /* NEC protocol sends repeat code as 0 0 0 FF */ - if ((key[3-2] == 0x00) && (key[3-3] == 0x00) && - (key[3] == 0xff)) { + if ((st->buf[3 - 2] == 0x00) && (st->buf[3 - 3] == 0x00) && + (st->buf[3] == 0xff)) { rc_repeat(d->rc_dev); return 0; } protocol = RC_TYPE_NEC; - scancode = RC_SCANCODE_NEC(key[3-2], key[3-3]); + scancode = RC_SCANCODE_NEC(st->buf[3 - 2], st->buf[3 - 3]); toggle = 0; break; default: /* RC-5 protocol changes toggle bit on new keypress */ protocol = RC_TYPE_RC5; - scancode = RC_SCANCODE_RC5(key[3-2], key[3-3]); - toggle = key[3-1]; + scancode = RC_SCANCODE_RC5(st->buf[3 - 2], st->buf[3 - 3]); + toggle = st->buf[3 - 1]; break; } From fa1ecd8dc454fe2d3075a964240f45ceb60cb9e0 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Oct 2016 06:53:51 -0300 Subject: [PATCH 017/792] [media] dib0700_core: don't use stack on I2C reads Be sure that I2C reads won't use stack by passing a pointer to the state buffer, that we know it was allocated via kmalloc, instead of relying on the buffer allocated by an I2C client. Reviewed-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/dib0700_core.c | 27 +++++++++++++++++++++++- 1 file changed, 26 insertions(+), 1 deletion(-) diff --git a/drivers/media/usb/dvb-usb/dib0700_core.c b/drivers/media/usb/dvb-usb/dib0700_core.c index 515f89dba199..92d5408684ac 100644 --- a/drivers/media/usb/dvb-usb/dib0700_core.c +++ b/drivers/media/usb/dvb-usb/dib0700_core.c @@ -213,7 +213,7 @@ static int dib0700_i2c_xfer_new(struct i2c_adapter *adap, struct i2c_msg *msg, usb_rcvctrlpipe(d->udev, 0), REQUEST_NEW_I2C_READ, USB_TYPE_VENDOR | USB_DIR_IN, - value, index, msg[i].buf, + value, index, st->buf, msg[i].len, USB_CTRL_GET_TIMEOUT); if (result < 0) { @@ -221,6 +221,14 @@ static int dib0700_i2c_xfer_new(struct i2c_adapter *adap, struct i2c_msg *msg, break; } + if (msg[i].len > sizeof(st->buf)) { + deb_info("buffer too small to fit %d bytes\n", + msg[i].len); + return -EIO; + } + + memcpy(msg[i].buf, st->buf, msg[i].len); + deb_data("<<< "); debug_dump(msg[i].buf, msg[i].len, deb_data); @@ -238,6 +246,13 @@ static int dib0700_i2c_xfer_new(struct i2c_adapter *adap, struct i2c_msg *msg, /* I2C ctrl + FE bus; */ st->buf[3] = ((gen_mode << 6) & 0xC0) | ((bus_mode << 4) & 0x30); + + if (msg[i].len > sizeof(st->buf) - 4) { + deb_info("i2c message to big: %d\n", + msg[i].len); + return -EIO; + } + /* The Actual i2c payload */ memcpy(&st->buf[4], msg[i].buf, msg[i].len); @@ -283,6 +298,11 @@ static int dib0700_i2c_xfer_legacy(struct i2c_adapter *adap, /* fill in the address */ st->buf[1] = msg[i].addr << 1; /* fill the buffer */ + if (msg[i].len > sizeof(st->buf) - 2) { + deb_info("i2c xfer to big: %d\n", + msg[i].len); + return -EIO; + } memcpy(&st->buf[2], msg[i].buf, msg[i].len); /* write/read request */ @@ -299,6 +319,11 @@ static int dib0700_i2c_xfer_legacy(struct i2c_adapter *adap, break; } + if (msg[i + 1].len > sizeof(st->buf)) { + deb_info("i2c xfer buffer to small for %d\n", + msg[i].len); + return -EIO; + } memcpy(msg[i + 1].buf, st->buf, msg[i + 1].len); msg[i+1].len = len; From 426398b15d9f18ce3e7b5c4e657b4c0103dd8389 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Oct 2016 07:34:36 -0300 Subject: [PATCH 018/792] [media] dibusb: don't do DMA on stack The USB control messages require DMA to work. We cannot pass a stack-allocated buffer, as it is not warranted that the stack would be into a DMA enabled area. Reviewed-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/dibusb-common.c | 109 ++++++++++++++++------ drivers/media/usb/dvb-usb/dibusb.h | 3 + 2 files changed, 86 insertions(+), 26 deletions(-) diff --git a/drivers/media/usb/dvb-usb/dibusb-common.c b/drivers/media/usb/dvb-usb/dibusb-common.c index 4b08c2a47ae2..951f3dac9082 100644 --- a/drivers/media/usb/dvb-usb/dibusb-common.c +++ b/drivers/media/usb/dvb-usb/dibusb-common.c @@ -63,72 +63,117 @@ EXPORT_SYMBOL(dibusb_pid_filter_ctrl); int dibusb_power_ctrl(struct dvb_usb_device *d, int onoff) { - u8 b[3]; + u8 *b; int ret; + + b = kmalloc(3, GFP_KERNEL); + if (!b) + return -ENOMEM; + b[0] = DIBUSB_REQ_SET_IOCTL; b[1] = DIBUSB_IOCTL_CMD_POWER_MODE; b[2] = onoff ? DIBUSB_IOCTL_POWER_WAKEUP : DIBUSB_IOCTL_POWER_SLEEP; - ret = dvb_usb_generic_write(d,b,3); + + ret = dvb_usb_generic_write(d, b, 3); + + kfree(b); + msleep(10); + return ret; } EXPORT_SYMBOL(dibusb_power_ctrl); int dibusb2_0_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) { - u8 b[3] = { 0 }; int ret; + u8 *b; + + b = kmalloc(3, GFP_KERNEL); + if (!b) + return -ENOMEM; if ((ret = dibusb_streaming_ctrl(adap,onoff)) < 0) - return ret; + goto ret; if (onoff) { b[0] = DIBUSB_REQ_SET_STREAMING_MODE; b[1] = 0x00; - if ((ret = dvb_usb_generic_write(adap->dev,b,2)) < 0) - return ret; + ret = dvb_usb_generic_write(adap->dev, b, 2); + if (ret < 0) + goto ret; } b[0] = DIBUSB_REQ_SET_IOCTL; b[1] = onoff ? DIBUSB_IOCTL_CMD_ENABLE_STREAM : DIBUSB_IOCTL_CMD_DISABLE_STREAM; - return dvb_usb_generic_write(adap->dev,b,3); + ret = dvb_usb_generic_write(adap->dev, b, 3); + +ret: + kfree(b); + return ret; } EXPORT_SYMBOL(dibusb2_0_streaming_ctrl); int dibusb2_0_power_ctrl(struct dvb_usb_device *d, int onoff) { - if (onoff) { - u8 b[3] = { DIBUSB_REQ_SET_IOCTL, DIBUSB_IOCTL_CMD_POWER_MODE, DIBUSB_IOCTL_POWER_WAKEUP }; - return dvb_usb_generic_write(d,b,3); - } else + u8 *b; + int ret; + + if (!onoff) return 0; + + b = kmalloc(3, GFP_KERNEL); + if (!b) + return -ENOMEM; + + b[0] = DIBUSB_REQ_SET_IOCTL; + b[1] = DIBUSB_IOCTL_CMD_POWER_MODE; + b[2] = DIBUSB_IOCTL_POWER_WAKEUP; + + ret = dvb_usb_generic_write(d, b, 3); + + kfree(b); + + return ret; } EXPORT_SYMBOL(dibusb2_0_power_ctrl); static int dibusb_i2c_msg(struct dvb_usb_device *d, u8 addr, u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen) { - u8 sndbuf[MAX_XFER_SIZE]; /* lead(1) devaddr,direction(1) addr(2) data(wlen) (len(2) (when reading)) */ - /* write only ? */ - int wo = (rbuf == NULL || rlen == 0), - len = 2 + wlen + (wo ? 0 : 2); + u8 *sndbuf; + int ret, wo, len; - if (4 + wlen > sizeof(sndbuf)) { + /* write only ? */ + wo = (rbuf == NULL || rlen == 0); + + len = 2 + wlen + (wo ? 0 : 2); + + sndbuf = kmalloc(MAX_XFER_SIZE, GFP_KERNEL); + if (!sndbuf) + return -ENOMEM; + + if (4 + wlen > MAX_XFER_SIZE) { warn("i2c wr: len=%d is too big!\n", wlen); - return -EOPNOTSUPP; + ret = -EOPNOTSUPP; + goto ret; } sndbuf[0] = wo ? DIBUSB_REQ_I2C_WRITE : DIBUSB_REQ_I2C_READ; sndbuf[1] = (addr << 1) | (wo ? 0 : 1); - memcpy(&sndbuf[2],wbuf,wlen); + memcpy(&sndbuf[2], wbuf, wlen); if (!wo) { - sndbuf[wlen+2] = (rlen >> 8) & 0xff; - sndbuf[wlen+3] = rlen & 0xff; + sndbuf[wlen + 2] = (rlen >> 8) & 0xff; + sndbuf[wlen + 3] = rlen & 0xff; } - return dvb_usb_generic_rw(d,sndbuf,len,rbuf,rlen,0); + ret = dvb_usb_generic_rw(d, sndbuf, len, rbuf, rlen, 0); + +ret: + kfree(sndbuf); + return ret; } /* @@ -320,11 +365,23 @@ EXPORT_SYMBOL(rc_map_dibusb_table); int dibusb_rc_query(struct dvb_usb_device *d, u32 *event, int *state) { - u8 key[5],cmd = DIBUSB_REQ_POLL_REMOTE; - dvb_usb_generic_rw(d,&cmd,1,key,5,0); - dvb_usb_nec_rc_key_to_event(d,key,event,state); - if (key[0] != 0) - deb_info("key: %*ph\n", 5, key); + u8 *buf; + + buf = kmalloc(5, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + buf[0] = DIBUSB_REQ_POLL_REMOTE; + + dvb_usb_generic_rw(d, buf, 1, buf, 5, 0); + + dvb_usb_nec_rc_key_to_event(d, buf, event, state); + + if (buf[0] != 0) + deb_info("key: %*ph\n", 5, buf); + + kfree(buf); + return 0; } EXPORT_SYMBOL(dibusb_rc_query); diff --git a/drivers/media/usb/dvb-usb/dibusb.h b/drivers/media/usb/dvb-usb/dibusb.h index 3f82163d8ab8..697be2a17ade 100644 --- a/drivers/media/usb/dvb-usb/dibusb.h +++ b/drivers/media/usb/dvb-usb/dibusb.h @@ -96,6 +96,9 @@ #define DIBUSB_IOCTL_CMD_ENABLE_STREAM 0x01 #define DIBUSB_IOCTL_CMD_DISABLE_STREAM 0x02 +/* Max transfer size done by I2C transfer functions */ +#define MAX_XFER_SIZE 64 + struct dibusb_state { struct dib_fe_xfer_ops ops; int mt2060_present; From ff1c123545d706c6e414132c9fc93e345f5141da Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Oct 2016 13:40:48 -0300 Subject: [PATCH 019/792] [media] dibusb: handle error code on RC query There's no sense on decoding and generating a RC key code if there was an error on the URB control message. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/dibusb-common.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/media/usb/dvb-usb/dibusb-common.c b/drivers/media/usb/dvb-usb/dibusb-common.c index 951f3dac9082..b0fd9a609352 100644 --- a/drivers/media/usb/dvb-usb/dibusb-common.c +++ b/drivers/media/usb/dvb-usb/dibusb-common.c @@ -366,6 +366,7 @@ EXPORT_SYMBOL(rc_map_dibusb_table); int dibusb_rc_query(struct dvb_usb_device *d, u32 *event, int *state) { u8 *buf; + int ret; buf = kmalloc(5, GFP_KERNEL); if (!buf) @@ -373,7 +374,9 @@ int dibusb_rc_query(struct dvb_usb_device *d, u32 *event, int *state) buf[0] = DIBUSB_REQ_POLL_REMOTE; - dvb_usb_generic_rw(d, buf, 1, buf, 5, 0); + ret = dvb_usb_generic_rw(d, buf, 1, buf, 5, 0); + if (ret < 0) + goto ret; dvb_usb_nec_rc_key_to_event(d, buf, event, state); @@ -382,6 +385,7 @@ int dibusb_rc_query(struct dvb_usb_device *d, u32 *event, int *state) kfree(buf); - return 0; +ret: + return ret; } EXPORT_SYMBOL(dibusb_rc_query); From f0b0ada7184cca44bb5ae96903eca304cc20eec5 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Oct 2016 07:55:38 -0300 Subject: [PATCH 020/792] [media] digitv: don't do DMA on stack The USB control messages require DMA to work. We cannot pass a stack-allocated buffer, as it is not warranted that the stack would be into a DMA enabled area. Reviewed-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/digitv.c | 20 +++++++++++--------- drivers/media/usb/dvb-usb/digitv.h | 5 ++++- 2 files changed, 15 insertions(+), 10 deletions(-) diff --git a/drivers/media/usb/dvb-usb/digitv.c b/drivers/media/usb/dvb-usb/digitv.c index 63134335c994..09f8c28bd4db 100644 --- a/drivers/media/usb/dvb-usb/digitv.c +++ b/drivers/media/usb/dvb-usb/digitv.c @@ -28,20 +28,22 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); static int digitv_ctrl_msg(struct dvb_usb_device *d, u8 cmd, u8 vv, u8 *wbuf, int wlen, u8 *rbuf, int rlen) { + struct digitv_state *st = d->priv; int wo = (rbuf == NULL || rlen == 0); /* write-only */ - u8 sndbuf[7],rcvbuf[7]; - memset(sndbuf,0,7); memset(rcvbuf,0,7); - sndbuf[0] = cmd; - sndbuf[1] = vv; - sndbuf[2] = wo ? wlen : rlen; + memset(st->sndbuf, 0, 7); + memset(st->rcvbuf, 0, 7); + + st->sndbuf[0] = cmd; + st->sndbuf[1] = vv; + st->sndbuf[2] = wo ? wlen : rlen; if (wo) { - memcpy(&sndbuf[3],wbuf,wlen); - dvb_usb_generic_write(d,sndbuf,7); + memcpy(&st->sndbuf[3], wbuf, wlen); + dvb_usb_generic_write(d, st->sndbuf, 7); } else { - dvb_usb_generic_rw(d,sndbuf,7,rcvbuf,7,10); - memcpy(rbuf,&rcvbuf[3],rlen); + dvb_usb_generic_rw(d, st->sndbuf, 7, st->rcvbuf, 7, 10); + memcpy(rbuf, &st->rcvbuf[3], rlen); } return 0; } diff --git a/drivers/media/usb/dvb-usb/digitv.h b/drivers/media/usb/dvb-usb/digitv.h index 908c09f4966b..581e09c25491 100644 --- a/drivers/media/usb/dvb-usb/digitv.h +++ b/drivers/media/usb/dvb-usb/digitv.h @@ -5,7 +5,10 @@ #include "dvb-usb.h" struct digitv_state { - int is_nxt6000; + int is_nxt6000; + + unsigned char sndbuf[7]; + unsigned char rcvbuf[7]; }; /* protocol (from usblogging and the SDK: From 208d8af509455ebf25f25f974c9907c0eb1a2b0a Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 10 Oct 2016 15:34:13 -0300 Subject: [PATCH 021/792] [media] dtt200u-fe: don't keep waiting for lock at set_frontend() It is up to the frontend kthread to wait for lock. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/dtt200u-fe.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/drivers/media/usb/dvb-usb/dtt200u-fe.c b/drivers/media/usb/dvb-usb/dtt200u-fe.c index c09332bd99cb..9bb15f7b48db 100644 --- a/drivers/media/usb/dvb-usb/dtt200u-fe.c +++ b/drivers/media/usb/dvb-usb/dtt200u-fe.c @@ -105,8 +105,6 @@ static int dtt200u_fe_set_frontend(struct dvb_frontend *fe) { struct dtv_frontend_properties *fep = &fe->dtv_property_cache; struct dtt200u_fe_state *state = fe->demodulator_priv; - int i; - enum fe_status st; u16 freq = fep->frequency / 250000; u8 bwbuf[2] = { SET_BANDWIDTH, 0 },freqbuf[3] = { SET_RF_FREQ, 0, 0 }; @@ -130,13 +128,6 @@ static int dtt200u_fe_set_frontend(struct dvb_frontend *fe) freqbuf[2] = (freq >> 8) & 0xff; dvb_usb_generic_write(state->d,freqbuf,3); - for (i = 0; i < 30; i++) { - msleep(20); - dtt200u_fe_read_status(fe, &st); - if (st & FE_TIMEDOUT) - continue; - } - return 0; } From 89919b518863e7dac98d4d6d4b08ed2113d91d27 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Oct 2016 08:06:57 -0300 Subject: [PATCH 022/792] [media] dtt200u-fe: don't do DMA on stack The USB control messages require DMA to work. We cannot pass a stack-allocated buffer, as it is not warranted that the stack would be into a DMA enabled area. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/dtt200u-fe.c | 95 ++++++++++++++++++-------- 1 file changed, 65 insertions(+), 30 deletions(-) diff --git a/drivers/media/usb/dvb-usb/dtt200u-fe.c b/drivers/media/usb/dvb-usb/dtt200u-fe.c index 9bb15f7b48db..7f7f64be6353 100644 --- a/drivers/media/usb/dvb-usb/dtt200u-fe.c +++ b/drivers/media/usb/dvb-usb/dtt200u-fe.c @@ -18,17 +18,22 @@ struct dtt200u_fe_state { struct dtv_frontend_properties fep; struct dvb_frontend frontend; + + unsigned char data[80]; + struct mutex data_mutex; }; static int dtt200u_fe_read_status(struct dvb_frontend *fe, enum fe_status *stat) { struct dtt200u_fe_state *state = fe->demodulator_priv; - u8 st = GET_TUNE_STATUS, b[3]; - dvb_usb_generic_rw(state->d,&st,1,b,3,0); + mutex_lock(&state->data_mutex); + state->data[0] = GET_TUNE_STATUS; - switch (b[0]) { + dvb_usb_generic_rw(state->d, state->data, 1, state->data, 3, 0); + + switch (state->data[0]) { case 0x01: *stat = FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK; @@ -41,51 +46,75 @@ static int dtt200u_fe_read_status(struct dvb_frontend *fe, *stat = 0; break; } + mutex_unlock(&state->data_mutex); return 0; } static int dtt200u_fe_read_ber(struct dvb_frontend* fe, u32 *ber) { struct dtt200u_fe_state *state = fe->demodulator_priv; - u8 bw = GET_VIT_ERR_CNT,b[3]; - dvb_usb_generic_rw(state->d,&bw,1,b,3,0); - *ber = (b[0] << 16) | (b[1] << 8) | b[2]; + + mutex_lock(&state->data_mutex); + state->data[0] = GET_VIT_ERR_CNT; + + dvb_usb_generic_rw(state->d, state->data, 1, state->data, 3, 0); + *ber = (state->data[0] << 16) | (state->data[1] << 8) | state->data[2]; + + mutex_unlock(&state->data_mutex); return 0; } static int dtt200u_fe_read_unc_blocks(struct dvb_frontend* fe, u32 *unc) { struct dtt200u_fe_state *state = fe->demodulator_priv; - u8 bw = GET_RS_UNCOR_BLK_CNT,b[2]; - dvb_usb_generic_rw(state->d,&bw,1,b,2,0); - *unc = (b[0] << 8) | b[1]; - return 0; + mutex_lock(&state->data_mutex); + state->data[0] = GET_RS_UNCOR_BLK_CNT; + + dvb_usb_generic_rw(state->d, state->data, 1, state->data, 2, 0); + + mutex_unlock(&state->data_mutex); + return ret; } static int dtt200u_fe_read_signal_strength(struct dvb_frontend* fe, u16 *strength) { struct dtt200u_fe_state *state = fe->demodulator_priv; - u8 bw = GET_AGC, b; - dvb_usb_generic_rw(state->d,&bw,1,&b,1,0); - *strength = (b << 8) | b; - return 0; + + mutex_lock(&state->data_mutex); + state->data[0] = GET_AGC; + + dvb_usb_generic_rw(state->d, state->data, 1, state->data, 1, 0); + + mutex_unlock(&state->data_mutex); + return ret; } static int dtt200u_fe_read_snr(struct dvb_frontend* fe, u16 *snr) { struct dtt200u_fe_state *state = fe->demodulator_priv; - u8 bw = GET_SNR,br; - dvb_usb_generic_rw(state->d,&bw,1,&br,1,0); - *snr = ~((br << 8) | br); - return 0; + + mutex_lock(&state->data_mutex); + state->data[0] = GET_SNR; + + dvb_usb_generic_rw(state->d, state->data, 1, state->data, 1, 0); + + mutex_unlock(&state->data_mutex); + return ret; } static int dtt200u_fe_init(struct dvb_frontend* fe) { struct dtt200u_fe_state *state = fe->demodulator_priv; - u8 b = SET_INIT; - return dvb_usb_generic_write(state->d,&b,1); + int ret; + + mutex_lock(&state->data_mutex); + state->data[0] = SET_INIT; + + ret = dvb_usb_generic_write(state->d, state->data, 1); + mutex_unlock(&state->data_mutex); + + return ret; } static int dtt200u_fe_sleep(struct dvb_frontend* fe) @@ -106,29 +135,34 @@ static int dtt200u_fe_set_frontend(struct dvb_frontend *fe) struct dtv_frontend_properties *fep = &fe->dtv_property_cache; struct dtt200u_fe_state *state = fe->demodulator_priv; u16 freq = fep->frequency / 250000; - u8 bwbuf[2] = { SET_BANDWIDTH, 0 },freqbuf[3] = { SET_RF_FREQ, 0, 0 }; + mutex_lock(&state->data_mutex); + state->data[0] = SET_BANDWIDTH; switch (fep->bandwidth_hz) { case 8000000: - bwbuf[1] = 8; + state->data[1] = 8; break; case 7000000: - bwbuf[1] = 7; + state->data[1] = 7; break; case 6000000: - bwbuf[1] = 6; + state->data[1] = 6; break; default: - return -EINVAL; + ret = -EINVAL; + goto ret; } - dvb_usb_generic_write(state->d,bwbuf,2); + dvb_usb_generic_write(state->d, state->data, 2); - freqbuf[1] = freq & 0xff; - freqbuf[2] = (freq >> 8) & 0xff; - dvb_usb_generic_write(state->d,freqbuf,3); + state->data[0] = SET_RF_FREQ; + state->data[1] = freq & 0xff; + state->data[2] = (freq >> 8) & 0xff; + dvb_usb_generic_write(state->d, state->data, 3); - return 0; +ret: + mutex_unlock(&state->data_mutex); + return ret; } static int dtt200u_fe_get_frontend(struct dvb_frontend* fe, @@ -160,6 +194,7 @@ struct dvb_frontend* dtt200u_fe_attach(struct dvb_usb_device *d) deb_info("attaching frontend dtt200u\n"); state->d = d; + mutex_init(&state->data_mutex); memcpy(&state->frontend.ops,&dtt200u_fe_ops,sizeof(struct dvb_frontend_ops)); state->frontend.demodulator_priv = state; From ba705a629ceee28f7ee4a5f977da52278b683eb0 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Oct 2016 13:44:09 -0300 Subject: [PATCH 023/792] [media] dtt200u-fe: handle errors on USB control messages If something goes wrong, return an error code, instead of assuming that everything went fine. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/dtt200u-fe.c | 40 ++++++++++++++++++++------ 1 file changed, 31 insertions(+), 9 deletions(-) diff --git a/drivers/media/usb/dvb-usb/dtt200u-fe.c b/drivers/media/usb/dvb-usb/dtt200u-fe.c index 7f7f64be6353..f5c042baa254 100644 --- a/drivers/media/usb/dvb-usb/dtt200u-fe.c +++ b/drivers/media/usb/dvb-usb/dtt200u-fe.c @@ -27,11 +27,17 @@ static int dtt200u_fe_read_status(struct dvb_frontend *fe, enum fe_status *stat) { struct dtt200u_fe_state *state = fe->demodulator_priv; + int ret; mutex_lock(&state->data_mutex); state->data[0] = GET_TUNE_STATUS; - dvb_usb_generic_rw(state->d, state->data, 1, state->data, 3, 0); + ret = dvb_usb_generic_rw(state->d, state->data, 1, state->data, 3, 0); + if (ret < 0) { + *stat = 0; + mutex_unlock(&state->data_mutex); + return ret; + } switch (state->data[0]) { case 0x01: @@ -53,25 +59,30 @@ static int dtt200u_fe_read_status(struct dvb_frontend *fe, static int dtt200u_fe_read_ber(struct dvb_frontend* fe, u32 *ber) { struct dtt200u_fe_state *state = fe->demodulator_priv; + int ret; mutex_lock(&state->data_mutex); state->data[0] = GET_VIT_ERR_CNT; - dvb_usb_generic_rw(state->d, state->data, 1, state->data, 3, 0); - *ber = (state->data[0] << 16) | (state->data[1] << 8) | state->data[2]; + ret = dvb_usb_generic_rw(state->d, state->data, 1, state->data, 3, 0); + if (ret >= 0) + *ber = (state->data[0] << 16) | (state->data[1] << 8) | state->data[2]; mutex_unlock(&state->data_mutex); - return 0; + return ret; } static int dtt200u_fe_read_unc_blocks(struct dvb_frontend* fe, u32 *unc) { struct dtt200u_fe_state *state = fe->demodulator_priv; + int ret; mutex_lock(&state->data_mutex); state->data[0] = GET_RS_UNCOR_BLK_CNT; - dvb_usb_generic_rw(state->d, state->data, 1, state->data, 2, 0); + ret = dvb_usb_generic_rw(state->d, state->data, 1, state->data, 2, 0); + if (ret >= 0) + *unc = (state->data[0] << 8) | state->data[1]; mutex_unlock(&state->data_mutex); return ret; @@ -80,11 +91,14 @@ static int dtt200u_fe_read_unc_blocks(struct dvb_frontend* fe, u32 *unc) static int dtt200u_fe_read_signal_strength(struct dvb_frontend* fe, u16 *strength) { struct dtt200u_fe_state *state = fe->demodulator_priv; + int ret; mutex_lock(&state->data_mutex); state->data[0] = GET_AGC; - dvb_usb_generic_rw(state->d, state->data, 1, state->data, 1, 0); + ret = dvb_usb_generic_rw(state->d, state->data, 1, state->data, 1, 0); + if (ret >= 0) + *strength = (state->data[0] << 8) | state->data[0]; mutex_unlock(&state->data_mutex); return ret; @@ -93,11 +107,14 @@ static int dtt200u_fe_read_signal_strength(struct dvb_frontend* fe, u16 *strengt static int dtt200u_fe_read_snr(struct dvb_frontend* fe, u16 *snr) { struct dtt200u_fe_state *state = fe->demodulator_priv; + int ret; mutex_lock(&state->data_mutex); state->data[0] = GET_SNR; - dvb_usb_generic_rw(state->d, state->data, 1, state->data, 1, 0); + ret = dvb_usb_generic_rw(state->d, state->data, 1, state->data, 1, 0); + if (ret >= 0) + *snr = ~((state->data[0] << 8) | state->data[0]); mutex_unlock(&state->data_mutex); return ret; @@ -134,6 +151,7 @@ static int dtt200u_fe_set_frontend(struct dvb_frontend *fe) { struct dtv_frontend_properties *fep = &fe->dtv_property_cache; struct dtt200u_fe_state *state = fe->demodulator_priv; + int ret; u16 freq = fep->frequency / 250000; mutex_lock(&state->data_mutex); @@ -153,12 +171,16 @@ static int dtt200u_fe_set_frontend(struct dvb_frontend *fe) goto ret; } - dvb_usb_generic_write(state->d, state->data, 2); + ret = dvb_usb_generic_write(state->d, state->data, 2); + if (ret < 0) + goto ret; state->data[0] = SET_RF_FREQ; state->data[1] = freq & 0xff; state->data[2] = (freq >> 8) & 0xff; - dvb_usb_generic_write(state->d, state->data, 3); + ret = dvb_usb_generic_write(state->d, state->data, 3); + if (ret < 0) + goto ret; ret: mutex_unlock(&state->data_mutex); From ab883e2de3fc58c0af6070ea067a607a6310772b Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Oct 2016 08:40:43 -0300 Subject: [PATCH 024/792] [media] dtt200u: don't do DMA on stack The USB control messages require DMA to work. We cannot pass a stack-allocated buffer, as it is not warranted that the stack would be into a DMA enabled area. Reviewed-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/dtt200u.c | 104 ++++++++++++++++++++-------- 1 file changed, 75 insertions(+), 29 deletions(-) diff --git a/drivers/media/usb/dvb-usb/dtt200u.c b/drivers/media/usb/dvb-usb/dtt200u.c index d2a01b50af0d..7706938b5167 100644 --- a/drivers/media/usb/dvb-usb/dtt200u.c +++ b/drivers/media/usb/dvb-usb/dtt200u.c @@ -20,74 +20,103 @@ MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2 (or-able))." DVB_USB DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); +struct dtt200u_state { + unsigned char data[80]; + struct mutex data_mutex; +}; + static int dtt200u_power_ctrl(struct dvb_usb_device *d, int onoff) { - u8 b = SET_INIT; + struct dtt200u_state *st = d->priv; + + mutex_lock(&st->data_mutex); + + st->data[0] = SET_INIT; if (onoff) - dvb_usb_generic_write(d,&b,2); + dvb_usb_generic_write(d, st->data, 2); + mutex_unlock(&st->data_mutex); return 0; } static int dtt200u_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) { - u8 b_streaming[2] = { SET_STREAMING, onoff }; - u8 b_rst_pid = RESET_PID_FILTER; + struct dtt200u_state *st = adap->dev->priv; - dvb_usb_generic_write(adap->dev, b_streaming, 2); + mutex_lock(&st->data_mutex); + st->data[0] = SET_STREAMING; + st->data[1] = onoff; + + dvb_usb_generic_write(adap->dev, st->data, 2); + + if (onoff) + return 0; + + st->data[0] = RESET_PID_FILTER; + dvb_usb_generic_write(adap->dev, st->data, 1); + + mutex_unlock(&st->data_mutex); - if (onoff == 0) - dvb_usb_generic_write(adap->dev, &b_rst_pid, 1); return 0; } static int dtt200u_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, int onoff) { - u8 b_pid[4]; + struct dtt200u_state *st = adap->dev->priv; + int ret; + pid = onoff ? pid : 0; - b_pid[0] = SET_PID_FILTER; - b_pid[1] = index; - b_pid[2] = pid & 0xff; - b_pid[3] = (pid >> 8) & 0x1f; + mutex_lock(&st->data_mutex); + st->data[0] = SET_PID_FILTER; + st->data[1] = index; + st->data[2] = pid & 0xff; + st->data[3] = (pid >> 8) & 0x1f; - return dvb_usb_generic_write(adap->dev, b_pid, 4); + ret = dvb_usb_generic_write(adap->dev, st->data, 4); + mutex_unlock(&st->data_mutex); + + return ret; } static int dtt200u_rc_query(struct dvb_usb_device *d) { - u8 key[5],cmd = GET_RC_CODE; + struct dtt200u_state *st = d->priv; u32 scancode; - dvb_usb_generic_rw(d,&cmd,1,key,5,0); - if (key[0] == 1) { + mutex_lock(&st->data_mutex); + st->data[0] = GET_RC_CODE; + + dvb_usb_generic_rw(d, st->data, 1, st->data, 5, 0); + if (st->data[0] == 1) { enum rc_type proto = RC_TYPE_NEC; - scancode = key[1]; - if ((u8) ~key[1] != key[2]) { + scancode = st->data[1]; + if ((u8) ~st->data[1] != st->data[2]) { /* Extended NEC */ scancode = scancode << 8; - scancode |= key[2]; + scancode |= st->data[2]; proto = RC_TYPE_NECX; } scancode = scancode << 8; - scancode |= key[3]; + scancode |= st->data[3]; /* Check command checksum is ok */ - if ((u8) ~key[3] == key[4]) + if ((u8) ~st->data[3] == st->data[4]) rc_keydown(d->rc_dev, proto, scancode, 0); else rc_keyup(d->rc_dev); - } else if (key[0] == 2) { + } else if (st->data[0] == 2) { rc_repeat(d->rc_dev); } else { rc_keyup(d->rc_dev); } - if (key[0] != 0) - deb_info("key: %*ph\n", 5, key); + if (st->data[0] != 0) + deb_info("st->data: %*ph\n", 5, st->data); + mutex_unlock(&st->data_mutex); return 0; } @@ -106,17 +135,24 @@ static struct dvb_usb_device_properties wt220u_miglia_properties; static int dtt200u_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) { + struct dvb_usb_device *d; + struct dtt200u_state *st; + if (0 == dvb_usb_device_init(intf, &dtt200u_properties, - THIS_MODULE, NULL, adapter_nr) || + THIS_MODULE, &d, adapter_nr) || 0 == dvb_usb_device_init(intf, &wt220u_properties, - THIS_MODULE, NULL, adapter_nr) || + THIS_MODULE, &d, adapter_nr) || 0 == dvb_usb_device_init(intf, &wt220u_fc_properties, - THIS_MODULE, NULL, adapter_nr) || + THIS_MODULE, &d, adapter_nr) || 0 == dvb_usb_device_init(intf, &wt220u_zl0353_properties, - THIS_MODULE, NULL, adapter_nr) || + THIS_MODULE, &d, adapter_nr) || 0 == dvb_usb_device_init(intf, &wt220u_miglia_properties, - THIS_MODULE, NULL, adapter_nr)) + THIS_MODULE, &d, adapter_nr)) { + st = d->priv; + mutex_init(&st->data_mutex); + return 0; + } return -ENODEV; } @@ -140,6 +176,8 @@ static struct dvb_usb_device_properties dtt200u_properties = { .usb_ctrl = CYPRESS_FX2, .firmware = "dvb-usb-dtt200u-01.fw", + .size_of_priv = sizeof(struct dtt200u_state), + .num_adapters = 1, .adapter = { { @@ -190,6 +228,8 @@ static struct dvb_usb_device_properties wt220u_properties = { .usb_ctrl = CYPRESS_FX2, .firmware = "dvb-usb-wt220u-02.fw", + .size_of_priv = sizeof(struct dtt200u_state), + .num_adapters = 1, .adapter = { { @@ -240,6 +280,8 @@ static struct dvb_usb_device_properties wt220u_fc_properties = { .usb_ctrl = CYPRESS_FX2, .firmware = "dvb-usb-wt220u-fc03.fw", + .size_of_priv = sizeof(struct dtt200u_state), + .num_adapters = 1, .adapter = { { @@ -290,6 +332,8 @@ static struct dvb_usb_device_properties wt220u_zl0353_properties = { .usb_ctrl = CYPRESS_FX2, .firmware = "dvb-usb-wt220u-zl0353-01.fw", + .size_of_priv = sizeof(struct dtt200u_state), + .num_adapters = 1, .adapter = { { @@ -340,6 +384,8 @@ static struct dvb_usb_device_properties wt220u_miglia_properties = { .usb_ctrl = CYPRESS_FX2, .firmware = "dvb-usb-wt220u-miglia-01.fw", + .size_of_priv = sizeof(struct dtt200u_state), + .num_adapters = 1, .generic_bulk_ctrl_endpoint = 0x01, From a3f9f07e06ebf37261171e167e2110b758c2a147 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Oct 2016 13:37:50 -0300 Subject: [PATCH 025/792] [media] dtt200u: handle USB control message errors If something bad happens while an USB control message is transfered, return an error code. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/dtt200u.c | 26 ++++++++++++++++++-------- 1 file changed, 18 insertions(+), 8 deletions(-) diff --git a/drivers/media/usb/dvb-usb/dtt200u.c b/drivers/media/usb/dvb-usb/dtt200u.c index 7706938b5167..f88572c7ae7c 100644 --- a/drivers/media/usb/dvb-usb/dtt200u.c +++ b/drivers/media/usb/dvb-usb/dtt200u.c @@ -28,37 +28,42 @@ struct dtt200u_state { static int dtt200u_power_ctrl(struct dvb_usb_device *d, int onoff) { struct dtt200u_state *st = d->priv; + int ret = 0; mutex_lock(&st->data_mutex); st->data[0] = SET_INIT; if (onoff) - dvb_usb_generic_write(d, st->data, 2); + ret = dvb_usb_generic_write(d, st->data, 2); mutex_unlock(&st->data_mutex); - return 0; + return ret; } static int dtt200u_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) { struct dtt200u_state *st = adap->dev->priv; + int ret; mutex_lock(&st->data_mutex); st->data[0] = SET_STREAMING; st->data[1] = onoff; - dvb_usb_generic_write(adap->dev, st->data, 2); + ret = dvb_usb_generic_write(adap->dev, st->data, 2); + if (ret < 0) + goto ret; if (onoff) - return 0; + goto ret; st->data[0] = RESET_PID_FILTER; - dvb_usb_generic_write(adap->dev, st->data, 1); + ret = dvb_usb_generic_write(adap->dev, st->data, 1); +ret: mutex_unlock(&st->data_mutex); - return 0; + return ret; } static int dtt200u_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, int onoff) @@ -84,11 +89,15 @@ static int dtt200u_rc_query(struct dvb_usb_device *d) { struct dtt200u_state *st = d->priv; u32 scancode; + int ret; mutex_lock(&st->data_mutex); st->data[0] = GET_RC_CODE; - dvb_usb_generic_rw(d, st->data, 1, st->data, 5, 0); + ret = dvb_usb_generic_rw(d, st->data, 1, st->data, 5, 0); + if (ret < 0) + goto ret; + if (st->data[0] == 1) { enum rc_type proto = RC_TYPE_NEC; @@ -116,8 +125,9 @@ static int dtt200u_rc_query(struct dvb_usb_device *d) if (st->data[0] != 0) deb_info("st->data: %*ph\n", 5, st->data); +ret: mutex_unlock(&st->data_mutex); - return 0; + return ret; } static int dtt200u_frontend_attach(struct dvb_usb_adapter *adap) From 8f306145df334e2797ef5aa63225cd5178e569c1 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Oct 2016 08:51:23 -0300 Subject: [PATCH 026/792] [media] dtv5100: don't do DMA on stack The USB control messages require DMA to work. We cannot pass a stack-allocated buffer, as it is not warranted that the stack would be into a DMA enabled area. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/dtv5100.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/media/usb/dvb-usb/dtv5100.c b/drivers/media/usb/dvb-usb/dtv5100.c index 3d11df41cac0..c60fb54f445f 100644 --- a/drivers/media/usb/dvb-usb/dtv5100.c +++ b/drivers/media/usb/dvb-usb/dtv5100.c @@ -31,9 +31,14 @@ module_param_named(debug, dvb_usb_dtv5100_debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS); DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); +struct dtv5100_state { + unsigned char data[80]; +}; + static int dtv5100_i2c_msg(struct dvb_usb_device *d, u8 addr, u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen) { + struct dtv5100_state *st = d->priv; u8 request; u8 type; u16 value; @@ -60,9 +65,10 @@ static int dtv5100_i2c_msg(struct dvb_usb_device *d, u8 addr, } index = (addr << 8) + wbuf[0]; + memcpy(st->data, rbuf, rlen); msleep(1); /* avoid I2C errors */ return usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), request, - type, value, index, rbuf, rlen, + type, value, index, st->data, rlen, DTV5100_USB_TIMEOUT); } @@ -176,7 +182,7 @@ static struct dvb_usb_device_properties dtv5100_properties = { .caps = DVB_USB_IS_AN_I2C_ADAPTER, .usb_ctrl = DEVICE_SPECIFIC, - .size_of_priv = 0, + .size_of_priv = sizeof(struct dtv5100_state), .num_adapters = 1, .adapter = {{ From fa86c9a1fca5a50563cc63e97aa130a3c54f1d4c Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Oct 2016 11:24:21 -0300 Subject: [PATCH 027/792] [media] gp8psk: don't do DMA on stack The USB control messages require DMA to work. We cannot pass a stack-allocated buffer, as it is not warranted that the stack would be into a DMA enabled area. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/gp8psk.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/drivers/media/usb/dvb-usb/gp8psk.c b/drivers/media/usb/dvb-usb/gp8psk.c index 5d0384dd45b5..807f5628a3bb 100644 --- a/drivers/media/usb/dvb-usb/gp8psk.c +++ b/drivers/media/usb/dvb-usb/gp8psk.c @@ -24,6 +24,10 @@ MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DV DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); +struct gp8psk_state { + unsigned char data[80]; +}; + static int gp8psk_get_fw_version(struct dvb_usb_device *d, u8 *fw_vers) { return (gp8psk_usb_in_op(d, GET_FW_VERS, 0, 0, fw_vers, 6)); @@ -53,17 +57,19 @@ static void gp8psk_info(struct dvb_usb_device *d) int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen) { + struct gp8psk_state *st = d->priv; int ret = 0,try = 0; if ((ret = mutex_lock_interruptible(&d->usb_mutex))) return ret; while (ret >= 0 && ret != blen && try < 3) { + memcpy(st->data, b, blen); ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev,0), req, USB_TYPE_VENDOR | USB_DIR_IN, - value,index,b,blen, + value, index, st->data, blen, 2000); deb_info("reading number %d (ret: %d)\n",try,ret); try++; @@ -86,6 +92,7 @@ int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen) { + struct gp8psk_state *st = d->priv; int ret; deb_xfer("out: req. %x, val: %x, ind: %x, buffer: ",req,value,index); @@ -94,11 +101,12 @@ int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value, if ((ret = mutex_lock_interruptible(&d->usb_mutex))) return ret; + memcpy(st->data, b, blen); if (usb_control_msg(d->udev, usb_sndctrlpipe(d->udev,0), req, USB_TYPE_VENDOR | USB_DIR_OUT, - value,index,b,blen, + value, index, st->data, blen, 2000) != blen) { warn("usb out operation failed."); ret = -EIO; @@ -265,6 +273,8 @@ static struct dvb_usb_device_properties gp8psk_properties = { .usb_ctrl = CYPRESS_FX2, .firmware = "dvb-usb-gp8psk-01.fw", + .size_of_priv = sizeof(struct gp8psk_state), + .num_adapters = 1, .adapter = { { From f1a503dddf4d4da2b7bbf6ae4e92527bdc265bb9 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Oct 2016 14:12:48 -0300 Subject: [PATCH 028/792] [media] gp8psk: don't go past the buffer size Add checks to avoid going out of the buffer. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/gp8psk.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/media/usb/dvb-usb/gp8psk.c b/drivers/media/usb/dvb-usb/gp8psk.c index 807f5628a3bb..adfd76491451 100644 --- a/drivers/media/usb/dvb-usb/gp8psk.c +++ b/drivers/media/usb/dvb-usb/gp8psk.c @@ -60,6 +60,9 @@ int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 struct gp8psk_state *st = d->priv; int ret = 0,try = 0; + if (blen > sizeof(st->data)) + return -EIO; + if ((ret = mutex_lock_interruptible(&d->usb_mutex))) return ret; @@ -98,6 +101,9 @@ int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value, deb_xfer("out: req. %x, val: %x, ind: %x, buffer: ",req,value,index); debug_dump(b,blen,deb_xfer); + if (blen > sizeof(st->data)) + return -EIO; + if ((ret = mutex_lock_interruptible(&d->usb_mutex))) return ret; @@ -151,6 +157,11 @@ static int gp8psk_load_bcm4500fw(struct dvb_usb_device *d) err("failed to load bcm4500 firmware."); goto out_free; } + if (buflen > 64) { + err("firmare chunk size bigger than 64 bytes."); + goto out_free; + } + memcpy(buf, ptr, buflen); if (dvb_usb_generic_write(d, buf, buflen)) { err("failed to load bcm4500 firmware."); From c3a66e9f465e7e792dff6ccd571bc657e6504c7b Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Oct 2016 11:38:46 -0300 Subject: [PATCH 029/792] [media] nova-t-usb2: don't do DMA on stack The USB control messages require DMA to work. We cannot pass a stack-allocated buffer, as it is not warranted that the stack would be into a DMA enabled area. Reviewed-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/nova-t-usb2.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/drivers/media/usb/dvb-usb/nova-t-usb2.c b/drivers/media/usb/dvb-usb/nova-t-usb2.c index fc7569e2728d..26d7188a1163 100644 --- a/drivers/media/usb/dvb-usb/nova-t-usb2.c +++ b/drivers/media/usb/dvb-usb/nova-t-usb2.c @@ -74,22 +74,29 @@ static struct rc_map_table rc_map_haupp_table[] = { */ static int nova_t_rc_query(struct dvb_usb_device *d, u32 *event, int *state) { - u8 key[5],cmd[2] = { DIBUSB_REQ_POLL_REMOTE, 0x35 }, data,toggle,custom; + u8 *buf, data, toggle, custom; u16 raw; int i; struct dibusb_device_state *st = d->priv; - dvb_usb_generic_rw(d,cmd,2,key,5,0); + buf = kmalloc(5, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + buf[0] = DIBUSB_REQ_POLL_REMOTE; + buf[1] = 0x35; + dvb_usb_generic_rw(d, buf, 2, buf, 5, 0); *state = REMOTE_NO_KEY_PRESSED; - switch (key[0]) { + switch (buf[0]) { case DIBUSB_RC_HAUPPAUGE_KEY_PRESSED: - raw = ((key[1] << 8) | key[2]) >> 3; + raw = ((buf[1] << 8) | buf[2]) >> 3; toggle = !!(raw & 0x800); data = raw & 0x3f; custom = (raw >> 6) & 0x1f; - deb_rc("raw key code 0x%02x, 0x%02x, 0x%02x to c: %02x d: %02x toggle: %d\n",key[1],key[2],key[3],custom,data,toggle); + deb_rc("raw key code 0x%02x, 0x%02x, 0x%02x to c: %02x d: %02x toggle: %d\n", + buf[1], buf[2], buf[3], custom, data, toggle); for (i = 0; i < ARRAY_SIZE(rc_map_haupp_table); i++) { if (rc5_data(&rc_map_haupp_table[i]) == data && @@ -117,6 +124,7 @@ static int nova_t_rc_query(struct dvb_usb_device *d, u32 *event, int *state) break; } + kfree(buf); return 0; } From 73d5c5c864f4094e86708760fd4612fbf1e6e76c Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Oct 2016 11:59:44 -0300 Subject: [PATCH 030/792] [media] pctv452e: don't do DMA on stack The USB control messages require DMA to work. We cannot pass a stack-allocated buffer, as it is not warranted that the stack would be into a DMA enabled area. Reviewed-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/pctv452e.c | 129 +++++++++++++++------------ 1 file changed, 74 insertions(+), 55 deletions(-) diff --git a/drivers/media/usb/dvb-usb/pctv452e.c b/drivers/media/usb/dvb-usb/pctv452e.c index c05de1b088a4..58b685094904 100644 --- a/drivers/media/usb/dvb-usb/pctv452e.c +++ b/drivers/media/usb/dvb-usb/pctv452e.c @@ -97,13 +97,14 @@ struct pctv452e_state { u8 c; /* transaction counter, wraps around... */ u8 initialized; /* set to 1 if 0x15 has been sent */ u16 last_rc_key; + + unsigned char data[80]; }; static int tt3650_ci_msg(struct dvb_usb_device *d, u8 cmd, u8 *data, unsigned int write_len, unsigned int read_len) { struct pctv452e_state *state = (struct pctv452e_state *)d->priv; - u8 buf[64]; u8 id; unsigned int rlen; int ret; @@ -112,33 +113,36 @@ static int tt3650_ci_msg(struct dvb_usb_device *d, u8 cmd, u8 *data, BUG_ON(write_len > 64 - 4); BUG_ON(read_len > 64 - 4); + mutex_lock(&state->ca_mutex); id = state->c++; - buf[0] = SYNC_BYTE_OUT; - buf[1] = id; - buf[2] = cmd; - buf[3] = write_len; + state->data[0] = SYNC_BYTE_OUT; + state->data[1] = id; + state->data[2] = cmd; + state->data[3] = write_len; - memcpy(buf + 4, data, write_len); + memcpy(state->data + 4, data, write_len); rlen = (read_len > 0) ? 64 : 0; - ret = dvb_usb_generic_rw(d, buf, 4 + write_len, - buf, rlen, /* delay_ms */ 0); + ret = dvb_usb_generic_rw(d, state->data, 4 + write_len, + state->data, rlen, /* delay_ms */ 0); if (0 != ret) goto failed; ret = -EIO; - if (SYNC_BYTE_IN != buf[0] || id != buf[1]) + if (SYNC_BYTE_IN != state->data[0] || id != state->data[1]) goto failed; - memcpy(data, buf + 4, read_len); + memcpy(data, state->data + 4, read_len); + mutex_unlock(&state->ca_mutex); return 0; failed: err("CI error %d; %02X %02X %02X -> %*ph.", - ret, SYNC_BYTE_OUT, id, cmd, 3, buf); + ret, SYNC_BYTE_OUT, id, cmd, 3, state->data); + mutex_unlock(&state->ca_mutex); return ret; } @@ -405,52 +409,53 @@ static int pctv452e_i2c_msg(struct dvb_usb_device *d, u8 addr, u8 *rcv_buf, u8 rcv_len) { struct pctv452e_state *state = (struct pctv452e_state *)d->priv; - u8 buf[64]; u8 id; int ret; + mutex_lock(&state->ca_mutex); id = state->c++; ret = -EINVAL; if (snd_len > 64 - 7 || rcv_len > 64 - 7) goto failed; - buf[0] = SYNC_BYTE_OUT; - buf[1] = id; - buf[2] = PCTV_CMD_I2C; - buf[3] = snd_len + 3; - buf[4] = addr << 1; - buf[5] = snd_len; - buf[6] = rcv_len; + state->data[0] = SYNC_BYTE_OUT; + state->data[1] = id; + state->data[2] = PCTV_CMD_I2C; + state->data[3] = snd_len + 3; + state->data[4] = addr << 1; + state->data[5] = snd_len; + state->data[6] = rcv_len; - memcpy(buf + 7, snd_buf, snd_len); + memcpy(state->data + 7, snd_buf, snd_len); - ret = dvb_usb_generic_rw(d, buf, 7 + snd_len, - buf, /* rcv_len */ 64, + ret = dvb_usb_generic_rw(d, state->data, 7 + snd_len, + state->data, /* rcv_len */ 64, /* delay_ms */ 0); if (ret < 0) goto failed; /* TT USB protocol error. */ ret = -EIO; - if (SYNC_BYTE_IN != buf[0] || id != buf[1]) + if (SYNC_BYTE_IN != state->data[0] || id != state->data[1]) goto failed; /* I2C device didn't respond as expected. */ ret = -EREMOTEIO; - if (buf[5] < snd_len || buf[6] < rcv_len) + if (state->data[5] < snd_len || state->data[6] < rcv_len) goto failed; - memcpy(rcv_buf, buf + 7, rcv_len); + memcpy(rcv_buf, state->data + 7, rcv_len); + mutex_unlock(&state->ca_mutex); return rcv_len; failed: - err("I2C error %d; %02X %02X %02X %02X %02X -> " - "%02X %02X %02X %02X %02X.", + err("I2C error %d; %02X %02X %02X %02X %02X -> %*ph", ret, SYNC_BYTE_OUT, id, addr << 1, snd_len, rcv_len, - buf[0], buf[1], buf[4], buf[5], buf[6]); + 7, state->data); + mutex_unlock(&state->ca_mutex); return ret; } @@ -499,8 +504,7 @@ static u32 pctv452e_i2c_func(struct i2c_adapter *adapter) static int pctv452e_power_ctrl(struct dvb_usb_device *d, int i) { struct pctv452e_state *state = (struct pctv452e_state *)d->priv; - u8 b0[] = { 0xaa, 0, PCTV_CMD_RESET, 1, 0 }; - u8 rx[PCTV_ANSWER_LEN]; + u8 *rx; int ret; info("%s: %d\n", __func__, i); @@ -511,6 +515,11 @@ static int pctv452e_power_ctrl(struct dvb_usb_device *d, int i) if (state->initialized) return 0; + rx = kmalloc(PCTV_ANSWER_LEN, GFP_KERNEL); + if (!rx) + return -ENOMEM; + + mutex_lock(&state->ca_mutex); /* hmm where shoud this should go? */ ret = usb_set_interface(d->udev, 0, ISOC_INTERFACE_ALTERNATIVE); if (ret != 0) @@ -518,65 +527,75 @@ static int pctv452e_power_ctrl(struct dvb_usb_device *d, int i) __func__, ret); /* this is a one-time initialization, dont know where to put */ - b0[1] = state->c++; + state->data[0] = 0xaa; + state->data[1] = state->c++; + state->data[2] = PCTV_CMD_RESET; + state->data[3] = 1; + state->data[4] = 0; /* reset board */ - ret = dvb_usb_generic_rw(d, b0, sizeof(b0), rx, PCTV_ANSWER_LEN, 0); + ret = dvb_usb_generic_rw(d, state->data, 5, rx, PCTV_ANSWER_LEN, 0); if (ret) - return ret; + goto ret; - b0[1] = state->c++; - b0[4] = 1; + state->data[1] = state->c++; + state->data[4] = 1; /* reset board (again?) */ - ret = dvb_usb_generic_rw(d, b0, sizeof(b0), rx, PCTV_ANSWER_LEN, 0); + ret = dvb_usb_generic_rw(d, state->data, 5, rx, PCTV_ANSWER_LEN, 0); if (ret) - return ret; + goto ret; state->initialized = 1; - return 0; +ret: + mutex_unlock(&state->ca_mutex); + kfree(rx); + return ret; } static int pctv452e_rc_query(struct dvb_usb_device *d) { struct pctv452e_state *state = (struct pctv452e_state *)d->priv; - u8 b[CMD_BUFFER_SIZE]; - u8 rx[PCTV_ANSWER_LEN]; int ret, i; - u8 id = state->c++; + u8 id; + + mutex_lock(&state->ca_mutex); + id = state->c++; /* prepare command header */ - b[0] = SYNC_BYTE_OUT; - b[1] = id; - b[2] = PCTV_CMD_IR; - b[3] = 0; + state->data[0] = SYNC_BYTE_OUT; + state->data[1] = id; + state->data[2] = PCTV_CMD_IR; + state->data[3] = 0; /* send ir request */ - ret = dvb_usb_generic_rw(d, b, 4, rx, PCTV_ANSWER_LEN, 0); + ret = dvb_usb_generic_rw(d, state->data, 4, + state->data, PCTV_ANSWER_LEN, 0); if (ret != 0) - return ret; + goto ret; if (debug > 3) { - info("%s: read: %2d: %*ph: ", __func__, ret, 3, rx); - for (i = 0; (i < rx[3]) && ((i+3) < PCTV_ANSWER_LEN); i++) - info(" %02x", rx[i+3]); + info("%s: read: %2d: %*ph: ", __func__, ret, 3, state->data); + for (i = 0; (i < state->data[3]) && ((i + 3) < PCTV_ANSWER_LEN); i++) + info(" %02x", state->data[i + 3]); info("\n"); } - if ((rx[3] == 9) && (rx[12] & 0x01)) { + if ((state->data[3] == 9) && (state->data[12] & 0x01)) { /* got a "press" event */ - state->last_rc_key = RC_SCANCODE_RC5(rx[7], rx[6]); + state->last_rc_key = RC_SCANCODE_RC5(state->data[7], state->data[6]); if (debug > 2) info("%s: cmd=0x%02x sys=0x%02x\n", - __func__, rx[6], rx[7]); + __func__, state->data[6], state->data[7]); rc_keydown(d->rc_dev, RC_TYPE_RC5, state->last_rc_key, 0); } else if (state->last_rc_key) { rc_keyup(d->rc_dev); state->last_rc_key = 0; } - - return 0; +ret: + mutex_unlock(&state->ca_mutex); + return ret; } static int pctv452e_read_mac_address(struct dvb_usb_device *d, u8 mac[6]) From 5dfd2c8f263dfcaf614d24734f0af8c1c18a9ca8 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Oct 2016 14:15:53 -0300 Subject: [PATCH 031/792] [media] pctv452e: don't call BUG_ON() on non-fatal error There are some conditions on this driver that are tested with BUG_ON() with are not serious enough to hang a machine. So, just return an error if this happens. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/pctv452e.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/media/usb/dvb-usb/pctv452e.c b/drivers/media/usb/dvb-usb/pctv452e.c index 58b685094904..7ad0006c5ae0 100644 --- a/drivers/media/usb/dvb-usb/pctv452e.c +++ b/drivers/media/usb/dvb-usb/pctv452e.c @@ -109,9 +109,10 @@ static int tt3650_ci_msg(struct dvb_usb_device *d, u8 cmd, u8 *data, unsigned int rlen; int ret; - BUG_ON(NULL == data && 0 != (write_len | read_len)); - BUG_ON(write_len > 64 - 4); - BUG_ON(read_len > 64 - 4); + if (!data || (write_len > 64 - 4) || (read_len > 64 - 4)) { + err("%s: transfer data invalid", __func__); + return -EIO; + }; mutex_lock(&state->ca_mutex); id = state->c++; From 88ca3619001380a3147246a22cb356f6065ad713 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Oct 2016 12:04:38 -0300 Subject: [PATCH 032/792] [media] technisat-usb2: use DMA buffers for I2C transfers The USB control messages require DMA to work. We cannot pass a stack-allocated buffer, as it is not warranted that the stack would be into a DMA enabled area. On this driver, most of the transfers are OK, but the I2C one was using stack. Reviewed-by: Patrick Boettcher Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/technisat-usb2.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/drivers/media/usb/dvb-usb/technisat-usb2.c b/drivers/media/usb/dvb-usb/technisat-usb2.c index d9f3262bf071..4706628a3ed5 100644 --- a/drivers/media/usb/dvb-usb/technisat-usb2.c +++ b/drivers/media/usb/dvb-usb/technisat-usb2.c @@ -89,9 +89,13 @@ struct technisat_usb2_state { static int technisat_usb2_i2c_access(struct usb_device *udev, u8 device_addr, u8 *tx, u8 txlen, u8 *rx, u8 rxlen) { - u8 b[64]; + u8 *b; int ret, actual_length; + b = kmalloc(64, GFP_KERNEL); + if (!b) + return -ENOMEM; + deb_i2c("i2c-access: %02x, tx: ", device_addr); debug_dump(tx, txlen, deb_i2c); deb_i2c(" "); @@ -123,7 +127,7 @@ static int technisat_usb2_i2c_access(struct usb_device *udev, if (ret < 0) { err("i2c-error: out failed %02x = %d", device_addr, ret); - return -ENODEV; + goto err; } ret = usb_bulk_msg(udev, @@ -131,7 +135,7 @@ static int technisat_usb2_i2c_access(struct usb_device *udev, b, 64, &actual_length, 1000); if (ret < 0) { err("i2c-error: in failed %02x = %d", device_addr, ret); - return -ENODEV; + goto err; } if (b[0] != I2C_STATUS_OK) { @@ -140,7 +144,7 @@ static int technisat_usb2_i2c_access(struct usb_device *udev, if (!(b[0] == I2C_STATUS_NAK && device_addr == 0x60 /* && device_is_technisat_usb2 */)) - return -ENODEV; + goto err; } deb_i2c("status: %d, ", b[0]); @@ -154,7 +158,9 @@ static int technisat_usb2_i2c_access(struct usb_device *udev, deb_i2c("\n"); - return 0; +err: + kfree(b); + return ret; } static int technisat_usb2_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, From e2296021081584bd6f0e2ea21e8b909c1d4b5a07 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Oct 2016 13:50:21 -0300 Subject: [PATCH 033/792] [media] nova-t-usb2: handle error code on RC query There's no sense on decoding and generating a RC key code if there was an error on the URB control message. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/nova-t-usb2.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/media/usb/dvb-usb/nova-t-usb2.c b/drivers/media/usb/dvb-usb/nova-t-usb2.c index 26d7188a1163..1babd3341910 100644 --- a/drivers/media/usb/dvb-usb/nova-t-usb2.c +++ b/drivers/media/usb/dvb-usb/nova-t-usb2.c @@ -76,7 +76,7 @@ static int nova_t_rc_query(struct dvb_usb_device *d, u32 *event, int *state) { u8 *buf, data, toggle, custom; u16 raw; - int i; + int i, ret; struct dibusb_device_state *st = d->priv; buf = kmalloc(5, GFP_KERNEL); @@ -85,7 +85,9 @@ static int nova_t_rc_query(struct dvb_usb_device *d, u32 *event, int *state) buf[0] = DIBUSB_REQ_POLL_REMOTE; buf[1] = 0x35; - dvb_usb_generic_rw(d, buf, 2, buf, 5, 0); + ret = dvb_usb_generic_rw(d, buf, 2, buf, 5, 0); + if (ret < 0) + goto ret; *state = REMOTE_NO_KEY_PRESSED; switch (buf[0]) { @@ -124,8 +126,9 @@ static int nova_t_rc_query(struct dvb_usb_device *d, u32 *event, int *state) break; } +ret: kfree(buf); - return 0; + return ret; } static int nova_t_read_mac_address (struct dvb_usb_device *d, u8 mac[6]) From aa9efbc7b64aa1c3bf6682d06e6970b874d55d08 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Oct 2016 13:55:53 -0300 Subject: [PATCH 034/792] [media] dw2102: return error if su3000_power_ctrl() fails Instead of silently ignoring the error, return it. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/dw2102.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/usb/dvb-usb/dw2102.c b/drivers/media/usb/dvb-usb/dw2102.c index 5fb0c650926e..2c720cb2fb00 100644 --- a/drivers/media/usb/dvb-usb/dw2102.c +++ b/drivers/media/usb/dvb-usb/dw2102.c @@ -852,7 +852,7 @@ static int su3000_power_ctrl(struct dvb_usb_device *d, int i) if (i && !state->initialized) { state->initialized = 1; /* reset board */ - dvb_usb_generic_rw(d, obuf, 2, NULL, 0, 0); + return dvb_usb_generic_rw(d, obuf, 2, NULL, 0, 0); } return 0; From 3dadf91cb830ac3a6992e539d82ec604fffe8671 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 7 Oct 2016 13:52:31 -0300 Subject: [PATCH 035/792] [media] digitv: handle error code on RC query There's no sense on decoding and generating a RC key code if there was an error on the URB control message. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/digitv.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/media/usb/dvb-usb/digitv.c b/drivers/media/usb/dvb-usb/digitv.c index 09f8c28bd4db..4284f6984dc1 100644 --- a/drivers/media/usb/dvb-usb/digitv.c +++ b/drivers/media/usb/dvb-usb/digitv.c @@ -29,7 +29,9 @@ static int digitv_ctrl_msg(struct dvb_usb_device *d, u8 cmd, u8 vv, u8 *wbuf, int wlen, u8 *rbuf, int rlen) { struct digitv_state *st = d->priv; - int wo = (rbuf == NULL || rlen == 0); /* write-only */ + int ret, wo; + + wo = (rbuf == NULL || rlen == 0); /* write-only */ memset(st->sndbuf, 0, 7); memset(st->rcvbuf, 0, 7); @@ -40,12 +42,12 @@ static int digitv_ctrl_msg(struct dvb_usb_device *d, if (wo) { memcpy(&st->sndbuf[3], wbuf, wlen); - dvb_usb_generic_write(d, st->sndbuf, 7); + ret = dvb_usb_generic_write(d, st->sndbuf, 7); } else { - dvb_usb_generic_rw(d, st->sndbuf, 7, st->rcvbuf, 7, 10); + ret = dvb_usb_generic_rw(d, st->sndbuf, 7, st->rcvbuf, 7, 10); memcpy(rbuf, &st->rcvbuf[3], rlen); } - return 0; + return ret; } /* I2C */ From 45ae4a5220a43ae79dacb69054a2c7928dd91c94 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 10 Oct 2016 08:28:26 -0300 Subject: [PATCH 036/792] [media] cpia2_usb: don't use stack for DMA The USB control messages require DMA to work. We cannot pass a stack-allocated buffer, as it is not warranted that the stack would be into a DMA enabled area. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/cpia2/cpia2_usb.c | 34 +++++++++++++++++++++++++---- 1 file changed, 30 insertions(+), 4 deletions(-) diff --git a/drivers/media/usb/cpia2/cpia2_usb.c b/drivers/media/usb/cpia2/cpia2_usb.c index 13620cdf0599..e9100a235831 100644 --- a/drivers/media/usb/cpia2/cpia2_usb.c +++ b/drivers/media/usb/cpia2/cpia2_usb.c @@ -545,18 +545,30 @@ static void free_sbufs(struct camera_data *cam) static int write_packet(struct usb_device *udev, u8 request, u8 * registers, u16 start, size_t size) { + unsigned char *buf; + int ret; + if (!registers || size <= 0) return -EINVAL; - return usb_control_msg(udev, + buf = kmalloc(size, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + memcpy(buf, registers, size); + + ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), request, USB_TYPE_VENDOR | USB_RECIP_DEVICE, start, /* value */ 0, /* index */ - registers, /* buffer */ + buf, /* buffer */ size, HZ); + + kfree(buf); + return ret; } /**************************************************************************** @@ -567,18 +579,32 @@ static int write_packet(struct usb_device *udev, static int read_packet(struct usb_device *udev, u8 request, u8 * registers, u16 start, size_t size) { + unsigned char *buf; + int ret; + if (!registers || size <= 0) return -EINVAL; - return usb_control_msg(udev, + buf = kmalloc(size, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), request, USB_DIR_IN|USB_TYPE_VENDOR|USB_RECIP_DEVICE, start, /* value */ 0, /* index */ - registers, /* buffer */ + buf, /* buffer */ size, HZ); + + if (ret >= 0) + memcpy(registers, buf, size); + + kfree(buf); + + return ret; } /****************************************************************************** From db65c49e442cf9c9d9dc950f67daf109609f982a Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 10 Oct 2016 11:11:13 -0300 Subject: [PATCH 037/792] [media] s2255drv: don't use stack for DMA The USB control messages require DMA to work. We cannot pass a stack-allocated buffer, as it is not warranted that the stack would be into a DMA enabled area. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/s2255/s2255drv.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/media/usb/s2255/s2255drv.c b/drivers/media/usb/s2255/s2255drv.c index c3a0e87066eb..f7bb78c1873c 100644 --- a/drivers/media/usb/s2255/s2255drv.c +++ b/drivers/media/usb/s2255/s2255drv.c @@ -1901,19 +1901,30 @@ static long s2255_vendor_req(struct s2255_dev *dev, unsigned char Request, s32 TransferBufferLength, int bOut) { int r; + unsigned char *buf; + + buf = kmalloc(TransferBufferLength, GFP_KERNEL); + if (!buf) + return -ENOMEM; + if (!bOut) { r = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), Request, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - Value, Index, TransferBuffer, + Value, Index, buf, TransferBufferLength, HZ * 5); + + if (r >= 0) + memcpy(TransferBuffer, buf, TransferBufferLength); } else { + memcpy(buf, TransferBuffer, TransferBufferLength); r = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), Request, USB_TYPE_VENDOR | USB_RECIP_DEVICE, - Value, Index, TransferBuffer, + Value, Index, buf, TransferBufferLength, HZ * 5); } + kfree(buf); return r; } From b5f93cb5133d3ad517afef541502c6c9aecf8e5d Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 10 Oct 2016 11:17:15 -0300 Subject: [PATCH 038/792] [media] stk-webcam: don't use stack for DMA The USB control messages require DMA to work. We cannot pass a stack-allocated buffer, as it is not warranted that the stack would be into a DMA enabled area. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/stkwebcam/stk-webcam.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/drivers/media/usb/stkwebcam/stk-webcam.c b/drivers/media/usb/stkwebcam/stk-webcam.c index db200c9d796d..22a9aae16291 100644 --- a/drivers/media/usb/stkwebcam/stk-webcam.c +++ b/drivers/media/usb/stkwebcam/stk-webcam.c @@ -147,20 +147,26 @@ int stk_camera_write_reg(struct stk_camera *dev, u16 index, u8 value) int stk_camera_read_reg(struct stk_camera *dev, u16 index, int *value) { struct usb_device *udev = dev->udev; + unsigned char *buf; int ret; + buf = kmalloc(sizeof(u8), GFP_KERNEL); + if (!buf) + return -ENOMEM; + ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x00, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 0x00, index, - (u8 *) value, + buf, sizeof(u8), 500); - if (ret < 0) - return ret; - else - return 0; + if (ret >= 0) + memcpy(value, buf, sizeof(u8)); + + kfree(buf); + return ret; } static int stk_start_stream(struct stk_camera *dev) From b430eaba0be5eb7140d0065df96982fa6b5ccc1d Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 10 Oct 2016 07:55:54 -0300 Subject: [PATCH 039/792] [media] flexcop-usb: don't use stack for DMA The USB control messages require DMA to work. We cannot pass a stack-allocated buffer, as it is not warranted that the stack would be into a DMA enabled area. While here, remove a dead function calling usb_control_msg(). Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/b2c2/flexcop-usb.c | 105 +++++++++++++++++---------- drivers/media/usb/b2c2/flexcop-usb.h | 4 + 2 files changed, 72 insertions(+), 37 deletions(-) diff --git a/drivers/media/usb/b2c2/flexcop-usb.c b/drivers/media/usb/b2c2/flexcop-usb.c index d4bdba60b0f7..52bc42da8a4c 100644 --- a/drivers/media/usb/b2c2/flexcop-usb.c +++ b/drivers/media/usb/b2c2/flexcop-usb.c @@ -73,23 +73,34 @@ static int flexcop_usb_readwrite_dw(struct flexcop_device *fc, u16 wRegOffsPCI, u8 request_type = (read ? USB_DIR_IN : USB_DIR_OUT) | USB_TYPE_VENDOR; u8 wAddress = B2C2_FLEX_PCIOFFSET_TO_INTERNALADDR(wRegOffsPCI) | (read ? 0x80 : 0); + int ret; - int len = usb_control_msg(fc_usb->udev, + mutex_lock(&fc_usb->data_mutex); + if (!read) + memcpy(fc_usb->data, val, sizeof(*val)); + + ret = usb_control_msg(fc_usb->udev, read ? B2C2_USB_CTRL_PIPE_IN : B2C2_USB_CTRL_PIPE_OUT, request, request_type, /* 0xc0 read or 0x40 write */ wAddress, 0, - val, + fc_usb->data, sizeof(u32), B2C2_WAIT_FOR_OPERATION_RDW * HZ); - if (len != sizeof(u32)) { + if (ret != sizeof(u32)) { err("error while %s dword from %d (%d).", read ? "reading" : "writing", wAddress, wRegOffsPCI); - return -EIO; + if (ret >= 0) + ret = -EIO; } - return 0; + + if (read && ret >= 0) + memcpy(val, fc_usb->data, sizeof(*val)); + mutex_unlock(&fc_usb->data_mutex); + + return ret; } /* * DKT 010817 - add support for V8 memory read/write and flash update @@ -100,9 +111,14 @@ static int flexcop_usb_v8_memory_req(struct flexcop_usb *fc_usb, { u8 request_type = USB_TYPE_VENDOR; u16 wIndex; - int nWaitTime, pipe, len; + int nWaitTime, pipe, ret; wIndex = page << 8; + if (buflen > sizeof(fc_usb->data)) { + err("Buffer size bigger than max URB control message\n"); + return -EIO; + } + switch (req) { case B2C2_USB_READ_V8_MEM: nWaitTime = B2C2_WAIT_FOR_OPERATION_V8READ; @@ -127,17 +143,32 @@ static int flexcop_usb_v8_memory_req(struct flexcop_usb *fc_usb, deb_v8("v8mem: %02x %02x %04x %04x, len: %d\n", request_type, req, wAddress, wIndex, buflen); - len = usb_control_msg(fc_usb->udev, pipe, + mutex_lock(&fc_usb->data_mutex); + + if ((request_type & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) + memcpy(fc_usb->data, pbBuffer, buflen); + + ret = usb_control_msg(fc_usb->udev, pipe, req, request_type, wAddress, wIndex, - pbBuffer, + fc_usb->data, buflen, nWaitTime * HZ); + if (ret != buflen) + ret = -EIO; - debug_dump(pbBuffer, len, deb_v8); - return len == buflen ? 0 : -EIO; + if (ret >= 0) { + ret = 0; + if ((request_type & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) + memcpy(pbBuffer, fc_usb->data, buflen); + } + + mutex_unlock(&fc_usb->data_mutex); + + debug_dump(pbBuffer, ret, deb_v8); + return ret; } #define bytes_left_to_read_on_page(paddr,buflen) \ @@ -196,29 +227,6 @@ static int flexcop_usb_get_mac_addr(struct flexcop_device *fc, int extended) fc->dvb_adapter.proposed_mac, 6); } -#if 0 -static int flexcop_usb_utility_req(struct flexcop_usb *fc_usb, int set, - flexcop_usb_utility_function_t func, u8 extra, u16 wIndex, - u16 buflen, u8 *pvBuffer) -{ - u16 wValue; - u8 request_type = (set ? USB_DIR_OUT : USB_DIR_IN) | USB_TYPE_VENDOR; - int nWaitTime = 2, - pipe = set ? B2C2_USB_CTRL_PIPE_OUT : B2C2_USB_CTRL_PIPE_IN, len; - wValue = (func << 8) | extra; - - len = usb_control_msg(fc_usb->udev,pipe, - B2C2_USB_UTILITY, - request_type, - wValue, - wIndex, - pvBuffer, - buflen, - nWaitTime * HZ); - return len == buflen ? 0 : -EIO; -} -#endif - /* usb i2c stuff */ static int flexcop_usb_i2c_req(struct flexcop_i2c_adapter *i2c, flexcop_usb_request_t req, flexcop_usb_i2c_function_t func, @@ -226,9 +234,14 @@ static int flexcop_usb_i2c_req(struct flexcop_i2c_adapter *i2c, { struct flexcop_usb *fc_usb = i2c->fc->bus_specific; u16 wValue, wIndex; - int nWaitTime,pipe,len; + int nWaitTime, pipe, ret; u8 request_type = USB_TYPE_VENDOR; + if (buflen > sizeof(fc_usb->data)) { + err("Buffer size bigger than max URB control message\n"); + return -EIO; + } + switch (func) { case USB_FUNC_I2C_WRITE: case USB_FUNC_I2C_MULTIWRITE: @@ -257,15 +270,32 @@ static int flexcop_usb_i2c_req(struct flexcop_i2c_adapter *i2c, wValue & 0xff, wValue >> 8, wIndex & 0xff, wIndex >> 8); - len = usb_control_msg(fc_usb->udev,pipe, + mutex_lock(&fc_usb->data_mutex); + + if ((request_type & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) + memcpy(fc_usb->data, buf, buflen); + + ret = usb_control_msg(fc_usb->udev, pipe, req, request_type, wValue, wIndex, - buf, + fc_usb->data, buflen, nWaitTime * HZ); - return len == buflen ? 0 : -EREMOTEIO; + + if (ret != buflen) + ret = -EIO; + + if (ret >= 0) { + ret = 0; + if ((request_type & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) + memcpy(buf, fc_usb->data, buflen); + } + + mutex_unlock(&fc_usb->data_mutex); + + return 0; } /* actual bus specific access functions, @@ -516,6 +546,7 @@ static int flexcop_usb_probe(struct usb_interface *intf, /* general flexcop init */ fc_usb = fc->bus_specific; fc_usb->fc_dev = fc; + mutex_init(&fc_usb->data_mutex); fc->read_ibi_reg = flexcop_usb_read_ibi_reg; fc->write_ibi_reg = flexcop_usb_write_ibi_reg; diff --git a/drivers/media/usb/b2c2/flexcop-usb.h b/drivers/media/usb/b2c2/flexcop-usb.h index 92529a9c4475..25ad43166e78 100644 --- a/drivers/media/usb/b2c2/flexcop-usb.h +++ b/drivers/media/usb/b2c2/flexcop-usb.h @@ -29,6 +29,10 @@ struct flexcop_usb { u8 tmp_buffer[1023+190]; int tmp_buffer_length; + + /* for URB control messages */ + u8 data[80]; + struct mutex data_mutex; }; #if 0 From 59dde8e70cfb7afbc1b647d7d3440dfb9a78b431 Mon Sep 17 00:00:00 2001 From: kbuild test robot Date: Tue, 11 Oct 2016 10:22:08 -0300 Subject: [PATCH 040/792] [media] pctv452e: fix semicolon.cocci warnings drivers/media/usb/dvb-usb/pctv452e.c:115:2-3: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Signed-off-by: Fengguang Wu Signed-off-by: Mauro Carvalho Chehab --- drivers/media/usb/dvb-usb/pctv452e.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/usb/dvb-usb/pctv452e.c b/drivers/media/usb/dvb-usb/pctv452e.c index 7ad0006c5ae0..07fa08be9e99 100644 --- a/drivers/media/usb/dvb-usb/pctv452e.c +++ b/drivers/media/usb/dvb-usb/pctv452e.c @@ -112,7 +112,7 @@ static int tt3650_ci_msg(struct dvb_usb_device *d, u8 cmd, u8 *data, if (!data || (write_len > 64 - 4) || (read_len > 64 - 4)) { err("%s: transfer data invalid", __func__); return -EIO; - }; + } mutex_lock(&state->ca_mutex); id = state->c++; From 4a262b14c57d6ec88982d40273e742f7b9151560 Mon Sep 17 00:00:00 2001 From: Shawn Lin Date: Wed, 12 Oct 2016 20:31:41 +0800 Subject: [PATCH 041/792] clk: rockchip: don't return NULL when failing to register ddrclk branch rockchip_clk_register_ddrclk should not return NULL when failing to call clk_register, otherwise rockchip_clk_register_branches prints "unknown clock type". The actual case is that it's a known clock type but we fail to register it, which may makes user confuse the reason of failure. And the pr_err here is pointless as rockchip_clk_register_branches will also print the similar message. Signed-off-by: Shawn Lin Signed-off-by: Heiko Stuebner --- drivers/clk/rockchip/clk-ddr.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/clk/rockchip/clk-ddr.c b/drivers/clk/rockchip/clk-ddr.c index 8feba93672c5..e8075359366b 100644 --- a/drivers/clk/rockchip/clk-ddr.c +++ b/drivers/clk/rockchip/clk-ddr.c @@ -144,11 +144,8 @@ struct clk *rockchip_clk_register_ddrclk(const char *name, int flags, ddrclk->ddr_flag = ddr_flag; clk = clk_register(NULL, &ddrclk->hw); - if (IS_ERR(clk)) { - pr_err("%s: could not register ddrclk %s\n", __func__, name); + if (IS_ERR(clk)) kfree(ddrclk); - return NULL; - } return clk; } From 5647b25c3335a25ba32d73e61850a374a708788a Mon Sep 17 00:00:00 2001 From: Jonathan Liu Date: Mon, 26 Sep 2016 20:21:45 +1000 Subject: [PATCH 042/792] drm/sun4i: rgb: Enable panel after controller The panel should be enabled after the controller so that we do not have visual glitches on the panel while the controller is setup. Similarly, the panel should be disabled before the controller. Signed-off-by: Jonathan Liu Reviewed-by: Sean Paul Signed-off-by: Maxime Ripard --- drivers/gpu/drm/sun4i/sun4i_rgb.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/sun4i/sun4i_rgb.c b/drivers/gpu/drm/sun4i/sun4i_rgb.c index c3ff10f559cc..4e4bea6f395c 100644 --- a/drivers/gpu/drm/sun4i/sun4i_rgb.c +++ b/drivers/gpu/drm/sun4i/sun4i_rgb.c @@ -152,15 +152,16 @@ static void sun4i_rgb_encoder_enable(struct drm_encoder *encoder) DRM_DEBUG_DRIVER("Enabling RGB output\n"); - if (!IS_ERR(tcon->panel)) { + if (!IS_ERR(tcon->panel)) drm_panel_prepare(tcon->panel); - drm_panel_enable(tcon->panel); - } /* encoder->bridge can be NULL; drm_bridge_enable checks for it */ drm_bridge_enable(encoder->bridge); sun4i_tcon_channel_enable(tcon, 0); + + if (!IS_ERR(tcon->panel)) + drm_panel_enable(tcon->panel); } static void sun4i_rgb_encoder_disable(struct drm_encoder *encoder) @@ -171,15 +172,16 @@ static void sun4i_rgb_encoder_disable(struct drm_encoder *encoder) DRM_DEBUG_DRIVER("Disabling RGB output\n"); + if (!IS_ERR(tcon->panel)) + drm_panel_disable(tcon->panel); + sun4i_tcon_channel_disable(tcon, 0); /* encoder->bridge can be NULL; drm_bridge_disable checks for it */ drm_bridge_disable(encoder->bridge); - if (!IS_ERR(tcon->panel)) { - drm_panel_disable(tcon->panel); + if (!IS_ERR(tcon->panel)) drm_panel_unprepare(tcon->panel); - } } static void sun4i_rgb_encoder_mode_set(struct drm_encoder *encoder, From 0df03b43035afd0a64916fe4e5bca978562ffa5a Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Thu, 29 Sep 2016 14:05:05 +0200 Subject: [PATCH 043/792] drm/sun4i: rgb: Remove the bridge enable/disable functions The atomic helpers already call the drm_bridge_enable on our behalf, there's no need to do it a second time. Reported-by: Sean Paul Reviewed-by: Sean Paul Signed-off-by: Maxime Ripard --- drivers/gpu/drm/sun4i/sun4i_rgb.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/gpu/drm/sun4i/sun4i_rgb.c b/drivers/gpu/drm/sun4i/sun4i_rgb.c index 4e4bea6f395c..d198ad7e5323 100644 --- a/drivers/gpu/drm/sun4i/sun4i_rgb.c +++ b/drivers/gpu/drm/sun4i/sun4i_rgb.c @@ -155,9 +155,6 @@ static void sun4i_rgb_encoder_enable(struct drm_encoder *encoder) if (!IS_ERR(tcon->panel)) drm_panel_prepare(tcon->panel); - /* encoder->bridge can be NULL; drm_bridge_enable checks for it */ - drm_bridge_enable(encoder->bridge); - sun4i_tcon_channel_enable(tcon, 0); if (!IS_ERR(tcon->panel)) @@ -177,9 +174,6 @@ static void sun4i_rgb_encoder_disable(struct drm_encoder *encoder) sun4i_tcon_channel_disable(tcon, 0); - /* encoder->bridge can be NULL; drm_bridge_disable checks for it */ - drm_bridge_disable(encoder->bridge); - if (!IS_ERR(tcon->panel)) drm_panel_unprepare(tcon->panel); } From 3e3affe549ebd228501d160886c1b3999d99e0c6 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 22 Sep 2016 11:50:52 +0200 Subject: [PATCH 044/792] drm/imx: hide an unused label The imx_drm_bind function causes a warning in linux-next when CONFIG_DRM_FBDEV_EMULATION is not set: drivers/gpu/drm/imx/imx-drm-core.c: In function 'imx_drm_bind': drivers/gpu/drm/imx/imx-drm-core.c:441:1: error: label 'err_unbind' defined but not used [-Werror=unused-label] I don't understand why the warning only showed up now, as the code has not been modified recently, but there is an obvious fix in adding another #if for the symbol. Signed-off-by: Arnd Bergmann Fixes: c1ff5a7aa3c3 ("drm/imx: Remove local fbdev emulation Kconfig option") Signed-off-by: Philipp Zabel --- drivers/gpu/drm/imx/imx-drm-core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/imx/imx-drm-core.c b/drivers/gpu/drm/imx/imx-drm-core.c index 98df09c2b388..b084c571b23f 100644 --- a/drivers/gpu/drm/imx/imx-drm-core.c +++ b/drivers/gpu/drm/imx/imx-drm-core.c @@ -436,9 +436,11 @@ static int imx_drm_bind(struct device *dev) err_fbhelper: drm_kms_helper_poll_fini(drm); +#if IS_ENABLED(CONFIG_DRM_FBDEV_EMULATION) if (imxdrm->fbhelper) drm_fbdev_cma_fini(imxdrm->fbhelper); err_unbind: +#endif component_unbind_all(drm->dev, drm); err_vblank: drm_vblank_cleanup(drm); From 4ad3e92c28057950c30ca19e32530eff9ee111bb Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 21 Sep 2016 15:12:24 +0000 Subject: [PATCH 045/792] gpu: ipu-v3: Use ERR_CAST instead of ERR_PTR(PTR_ERR()) Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...)). Generated by: scripts/coccinelle/api/err_cast.cocci Signed-off-by: Wei Yongjun Signed-off-by: Philipp Zabel --- drivers/gpu/ipu-v3/ipu-image-convert.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/ipu-v3/ipu-image-convert.c b/drivers/gpu/ipu-v3/ipu-image-convert.c index 2ba7d437a2af..805b6fa7b5f4 100644 --- a/drivers/gpu/ipu-v3/ipu-image-convert.c +++ b/drivers/gpu/ipu-v3/ipu-image-convert.c @@ -1617,7 +1617,7 @@ ipu_image_convert(struct ipu_soc *ipu, enum ipu_ic_task ic_task, ctx = ipu_image_convert_prepare(ipu, ic_task, in, out, rot_mode, complete, complete_context); if (IS_ERR(ctx)) - return ERR_PTR(PTR_ERR(ctx)); + return ERR_CAST(ctx); run = kzalloc(sizeof(*run), GFP_KERNEL); if (!run) { From 4547f4d8ffd63ba4ac129f9136027bd14b729101 Mon Sep 17 00:00:00 2001 From: Liu Bo Date: Fri, 23 Sep 2016 14:05:04 -0700 Subject: [PATCH 046/792] Btrfs: kill BUG_ON in do_relocation While updating btree, we try to push items between sibling nodes/leaves in order to keep height as low as possible. But we don't memset the original places with zero when pushing items so that we could end up leaving stale content in nodes/leaves. One may read the above stale content by increasing btree blocks' @nritems. One case I've come across is that in fs tree, a leaf has two parent nodes, hence running balance ends up with processing this leaf with two parent nodes, but it can only reach the valid parent node through btrfs_search_slot, so it'd be like, do_relocation for P in all parent nodes of block A: if !P->eb: btrfs_search_slot(key); --> get path from P to A. if lowest: BUG_ON(A->bytenr != bytenr of A recorded in P); btrfs_cow_block(P, A); --> change A's bytenr in P. After btrfs_cow_block, P has the new bytenr of A, but with the same @key, we get the same path again, and get panic by BUG_ON. Note that this is only happening in a corrupted fs, for a regular fs in which we have correct @nritems so that we won't read stale content in any case. Reviewed-by: Josef Bacik Signed-off-by: Liu Bo Signed-off-by: David Sterba --- fs/btrfs/relocation.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c index 0ec8ffa37ab0..c4af0cdb783d 100644 --- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -2728,7 +2728,14 @@ static int do_relocation(struct btrfs_trans_handle *trans, bytenr = btrfs_node_blockptr(upper->eb, slot); if (lowest) { - BUG_ON(bytenr != node->bytenr); + if (bytenr != node->bytenr) { + btrfs_err(root->fs_info, + "lowest leaf/node mismatch: bytenr %llu node->bytenr %llu slot %d upper %llu", + bytenr, node->bytenr, slot, + upper->eb->start); + err = -EIO; + goto next; + } } else { if (node->eb->start == bytenr) goto next; From 1aeb5b615cd10db7324d4e4d167c4916dfeca311 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 12 Oct 2016 08:21:43 -0300 Subject: [PATCH 047/792] [media] radio-bcm2048: don't ignore errors Remove this warning: drivers/staging/media/bcm2048/radio-bcm2048.c: In function 'bcm2048_set_rds_no_lock': drivers/staging/media/bcm2048/radio-bcm2048.c:467:6: warning: variable 'err' set but not used [-Wunused-but-set-variable] int err; ^~~ By returning the error code. Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/bcm2048/radio-bcm2048.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/staging/media/bcm2048/radio-bcm2048.c b/drivers/staging/media/bcm2048/radio-bcm2048.c index 8dade197f053..0f088405e186 100644 --- a/drivers/staging/media/bcm2048/radio-bcm2048.c +++ b/drivers/staging/media/bcm2048/radio-bcm2048.c @@ -482,6 +482,8 @@ static int bcm2048_set_rds_no_lock(struct bcm2048_device *bdev, u8 rds_on) flags); memset(&bdev->rds_info, 0, sizeof(bdev->rds_info)); } + if (err) + return err; err = bcm2048_send_command(bdev, BCM2048_I2C_FM_RDS_SYSTEM, bdev->cache_fm_rds_system); From 43daa01323da37a3692cabe1579ef5c2c4372e06 Mon Sep 17 00:00:00 2001 From: Liu Ying Date: Mon, 10 Oct 2016 14:50:06 +0800 Subject: [PATCH 048/792] drm/imx: ipuv3-plane: Switch EBA buffer only when we don't need modeset We added active plane reconfiguration support by forcing a full modeset operation. So, looking at old_plane_state->fb to determine whether we need to switch EBA buffer(for hardware double buffering) in ipu_plane_atomic_set_base() or not is no more correct. Instead, we should do that only when we don't need modeset, otherwise, we initialize the two EBA buffers with the buffer address. Fixes: c6c1f9bc798b ("drm/imx: Add active plane reconfiguration support") Cc: stable@vger.kernel.org # 4.8 Signed-off-by: Liu Ying Signed-off-by: Philipp Zabel --- drivers/gpu/drm/imx/ipuv3-plane.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/imx/ipuv3-plane.c b/drivers/gpu/drm/imx/ipuv3-plane.c index ce22d0a0ddc8..f5861d9b0df7 100644 --- a/drivers/gpu/drm/imx/ipuv3-plane.c +++ b/drivers/gpu/drm/imx/ipuv3-plane.c @@ -108,6 +108,7 @@ static void ipu_plane_atomic_set_base(struct ipu_plane *ipu_plane, { struct drm_plane *plane = &ipu_plane->base; struct drm_plane_state *state = plane->state; + struct drm_crtc_state *crtc_state = state->crtc->state; struct drm_framebuffer *fb = state->fb; unsigned long eba, ubo, vbo; int active; @@ -149,7 +150,7 @@ static void ipu_plane_atomic_set_base(struct ipu_plane *ipu_plane, break; } - if (old_state->fb) { + if (!drm_atomic_crtc_needs_modeset(crtc_state)) { active = ipu_idmac_get_current_buffer(ipu_plane->ipu_ch); ipu_cpmem_set_buffer(ipu_plane->ipu_ch, !active, eba); ipu_idmac_select_buffer(ipu_plane->ipu_ch, !active); From 81d553545a1510ff7c7c00cbc9b57d6172d411a4 Mon Sep 17 00:00:00 2001 From: Liu Ying Date: Mon, 10 Oct 2016 14:50:07 +0800 Subject: [PATCH 049/792] drm/imx: ipuv3-plane: Skip setting u/vbo only when we don't need modeset We added active plane reconfiguration support by forcing a full modeset operation. So, looking at old_plane_state->fb to determine whether we need to set u/v offset(aka, u/vbo for IPUv3) in ipu_plane_atomic_set_base() or not is no more correct. Instead, we should do that only when we don't need modeset. Fixes: c6c1f9bc798b ("drm/imx: Add active plane reconfiguration support") Cc: stable@vger.kernel.org # 4.8 Signed-off-by: Liu Ying Signed-off-by: Philipp Zabel --- drivers/gpu/drm/imx/ipuv3-plane.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/imx/ipuv3-plane.c b/drivers/gpu/drm/imx/ipuv3-plane.c index f5861d9b0df7..cfb34b595d15 100644 --- a/drivers/gpu/drm/imx/ipuv3-plane.c +++ b/drivers/gpu/drm/imx/ipuv3-plane.c @@ -103,8 +103,7 @@ drm_plane_state_to_vbo(struct drm_plane_state *state) (state->src_x >> 16) / 2 - eba; } -static void ipu_plane_atomic_set_base(struct ipu_plane *ipu_plane, - struct drm_plane_state *old_state) +static void ipu_plane_atomic_set_base(struct ipu_plane *ipu_plane) { struct drm_plane *plane = &ipu_plane->base; struct drm_plane_state *state = plane->state; @@ -118,7 +117,7 @@ static void ipu_plane_atomic_set_base(struct ipu_plane *ipu_plane, switch (fb->pixel_format) { case DRM_FORMAT_YUV420: case DRM_FORMAT_YVU420: - if (old_state->fb) + if (!drm_atomic_crtc_needs_modeset(crtc_state)) break; /* @@ -393,7 +392,7 @@ static void ipu_plane_atomic_update(struct drm_plane *plane, struct drm_crtc_state *crtc_state = state->crtc->state; if (!drm_atomic_crtc_needs_modeset(crtc_state)) { - ipu_plane_atomic_set_base(ipu_plane, old_state); + ipu_plane_atomic_set_base(ipu_plane); return; } } @@ -438,7 +437,7 @@ static void ipu_plane_atomic_update(struct drm_plane *plane, ipu_cpmem_set_high_priority(ipu_plane->ipu_ch); ipu_idmac_set_double_buffer(ipu_plane->ipu_ch, 1); ipu_cpmem_set_stride(ipu_plane->ipu_ch, state->fb->pitches[0]); - ipu_plane_atomic_set_base(ipu_plane, old_state); + ipu_plane_atomic_set_base(ipu_plane); ipu_plane_enable(ipu_plane); } From 8cca354816adacb91280e19c50f81ffddc0460a4 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 13 Oct 2016 11:53:21 +0300 Subject: [PATCH 050/792] drm/imx: drm_dev_alloc() returns error pointers We are checking for NULL here, when we should be checking for error pointers. Fixes: 54db5decce17 ("drm/imx: drop deprecated load/unload drm_driver ops") Signed-off-by: Dan Carpenter Reviewed-by: Lucas Stach Signed-off-by: Philipp Zabel --- drivers/gpu/drm/imx/imx-drm-core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/imx/imx-drm-core.c b/drivers/gpu/drm/imx/imx-drm-core.c index b084c571b23f..9672b579f950 100644 --- a/drivers/gpu/drm/imx/imx-drm-core.c +++ b/drivers/gpu/drm/imx/imx-drm-core.c @@ -357,8 +357,8 @@ static int imx_drm_bind(struct device *dev) int ret; drm = drm_dev_alloc(&imx_drm_driver, dev); - if (!drm) - return -ENOMEM; + if (IS_ERR(drm)) + return PTR_ERR(drm); imxdrm = devm_kzalloc(dev, sizeof(*imxdrm), GFP_KERNEL); if (!imxdrm) { From e73aca5184ad9fc948ba22b4d35dce11db35bb25 Mon Sep 17 00:00:00 2001 From: Liu Ying Date: Tue, 18 Oct 2016 16:44:03 +0800 Subject: [PATCH 051/792] drm/imx: ipuv3-plane: Access old u/vbo properly in ->atomic_check for YU12/YV12 Before accessing the u/v offset(aka, u/vbo for IPUv3) of the old plane state's relevant fb, we should make sure the fb is in YU12 or YV12 pixel format(which are the two YUV pixel formats we support only), otherwise, we are likely to trigger BUG_ON() in drm_plane_state_to_u/vbo() since the fb's pixel format is probably not YU12 or YV12. Link: https://bugs.freedesktop.org/show_bug.cgi?id=98150 Fixes: c6c1f9bc798b ("drm/imx: Add active plane reconfiguration support") Cc: stable@vger.kernel.org # 4.8 Signed-off-by: Liu Ying Signed-off-by: Philipp Zabel --- drivers/gpu/drm/imx/ipuv3-plane.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/imx/ipuv3-plane.c b/drivers/gpu/drm/imx/ipuv3-plane.c index cfb34b595d15..5c342997863e 100644 --- a/drivers/gpu/drm/imx/ipuv3-plane.c +++ b/drivers/gpu/drm/imx/ipuv3-plane.c @@ -355,7 +355,9 @@ static int ipu_plane_atomic_check(struct drm_plane *plane, if ((ubo > 0xfffff8) || (vbo > 0xfffff8)) return -EINVAL; - if (old_fb) { + if (old_fb && + (old_fb->pixel_format == DRM_FORMAT_YUV420 || + old_fb->pixel_format == DRM_FORMAT_YVU420)) { old_ubo = drm_plane_state_to_ubo(old_state); old_vbo = drm_plane_state_to_vbo(old_state); if (ubo != old_ubo || vbo != old_vbo) From 0ce267ff95a0302cf6fb2a552833abbfb7861a43 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 18 Oct 2016 15:36:48 +0200 Subject: [PATCH 052/792] fuse: fix root dentry initialization Add missing dentry initialization to root dentry. Fixes: f75fdf22b0a8 ("fuse: don't use ->d_time") Reported-by: Andreas Reis Signed-off-by: Miklos Szeredi --- fs/fuse/dir.c | 5 +++++ fs/fuse/fuse_i.h | 1 + fs/fuse/inode.c | 3 ++- 3 files changed, 8 insertions(+), 1 deletion(-) diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c index 6a4d0e5418a1..b3ebe512d64c 100644 --- a/fs/fuse/dir.c +++ b/fs/fuse/dir.c @@ -286,6 +286,11 @@ const struct dentry_operations fuse_dentry_operations = { .d_release = fuse_dentry_release, }; +const struct dentry_operations fuse_root_dentry_operations = { + .d_init = fuse_dentry_init, + .d_release = fuse_dentry_release, +}; + int fuse_valid_type(int m) { return S_ISREG(m) || S_ISDIR(m) || S_ISLNK(m) || S_ISCHR(m) || diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h index 0dfbb136e59a..91307940c8ac 100644 --- a/fs/fuse/fuse_i.h +++ b/fs/fuse/fuse_i.h @@ -692,6 +692,7 @@ static inline u64 get_node_id(struct inode *inode) extern const struct file_operations fuse_dev_operations; extern const struct dentry_operations fuse_dentry_operations; +extern const struct dentry_operations fuse_root_dentry_operations; /** * Inode to nodeid comparison. diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c index 17141099f2e7..6fe6a88ecb4a 100644 --- a/fs/fuse/inode.c +++ b/fs/fuse/inode.c @@ -1131,10 +1131,11 @@ static int fuse_fill_super(struct super_block *sb, void *data, int silent) err = -ENOMEM; root = fuse_get_root_inode(sb, d.rootmode); + sb->s_d_op = &fuse_root_dentry_operations; root_dentry = d_make_root(root); if (!root_dentry) goto err_dev_free; - /* only now - we want root dentry with NULL ->d_op */ + /* Root dentry doesn't have .d_revalidate */ sb->s_d_op = &fuse_dentry_operations; init_req = fuse_request_alloc(0); From f95df7d6cd92787d54c9ad3d4843f9bcd137f9db Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 17 Oct 2016 15:16:35 +0000 Subject: [PATCH 053/792] dmaengine: edma: Fix error return code in edma_alloc_chan_resources() Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun Signed-off-by: Vinod Koul --- drivers/dma/edma.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c index e18a58068bca..77242b37ef87 100644 --- a/drivers/dma/edma.c +++ b/drivers/dma/edma.c @@ -1628,6 +1628,7 @@ static int edma_alloc_chan_resources(struct dma_chan *chan) if (echan->slot[0] < 0) { dev_err(dev, "Entry slot allocation failed for channel %u\n", EDMA_CHAN_SLOT(echan->ch_num)); + ret = echan->slot[0]; goto err_slot; } From d6619761068cf573cae406f176d00b82a39a37fc Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=A9r=C3=A9my=20Lefaure?= Date: Thu, 6 Oct 2016 17:59:53 -0400 Subject: [PATCH 054/792] dmaengine: mmp_tdma: add missing select GENERIC_ALLOCATOR in Kconfig MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There are some compilation errors when CONFIG_MMP_TDMA is enabled and CONFIG_GENERIC_ALLOCATOR is disabled: drivers/built-in.o: In function `mmp_tdma_prep_dma_cyclic': mmp_tdma.c:(.text+0x7890e): undefined reference to `gen_pool_dma_alloc' drivers/built-in.o: In function `mmp_tdma_free_chan_resources': mmp_tdma.c:(.text+0x78aca): undefined reference to `gen_pool_free' drivers/built-in.o: In function `mmp_tdma_probe': mmp_tdma.c:(.text+0x78ea8): undefined reference to `of_gen_pool_get' This commit fix this problem by selecting GENERIC_ALLOCATOR when CONFIG_MMP_TDMA is enabled. Signed-off-by: Jérémy Lefaure Signed-off-by: Vinod Koul --- drivers/dma/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index af63a6bcf564..141aefbe37ec 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -306,6 +306,7 @@ config MMP_TDMA depends on ARCH_MMP || COMPILE_TEST select DMA_ENGINE select MMP_SRAM if ARCH_MMP + select GENERIC_ALLOCATOR help Support the MMP Two-Channel DMA engine. This engine used for MMP Audio DMA and pxa910 SQU. From 83ba62bc700bab710b22be3a1bf6cf973f754273 Mon Sep 17 00:00:00 2001 From: Bibby Hsieh Date: Tue, 18 Oct 2016 16:23:59 +0800 Subject: [PATCH 055/792] drm/mediatek: fix a typo of OD_CFG to OD_RELAYMODE If we want to set the hardware OD to relay mode, we have to set OD_CFG register rather than OD_RELAYMODE; otherwise, the system will access the wrong address. Fixes: 7216436420414144646f5d8343d061355fd23483 ("drm/mediatek: set mt8173 dithering function") Cc: stable@vger.kernel.org # v4.9+ Signed-off-by: Bibby Hsieh Acked-by: CK Hu --- drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c index df33b3ca6ffd..aa5f20fabd10 100644 --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c @@ -123,7 +123,7 @@ static void mtk_od_config(struct mtk_ddp_comp *comp, unsigned int w, unsigned int bpc) { writel(w << 16 | h, comp->regs + DISP_OD_SIZE); - writel(OD_RELAYMODE, comp->regs + OD_RELAYMODE); + writel(OD_RELAYMODE, comp->regs + OD_CFG); mtk_dither_set(comp, bpc, DISP_OD_CFG); } From f752fff611b99f5679224f3990a1f531ea64b1ec Mon Sep 17 00:00:00 2001 From: Bibby Hsieh Date: Thu, 29 Sep 2016 11:29:48 +0800 Subject: [PATCH 056/792] drm/mediatek: set vblank_disable_allowed to true MTK DRM driver didn't set the vblank_disable_allowed to true, it cause that the irq_handler is called every 16.6 ms (every vblank) when the display didn't be updated. Signed-off-by: Bibby Hsieh Acked-by: CK Hu --- drivers/gpu/drm/mediatek/mtk_drm_drv.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c index cf83f6507ec8..0b2ae47eb52c 100644 --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c @@ -217,6 +217,7 @@ static int mtk_drm_kms_init(struct drm_device *drm) if (ret < 0) goto err_component_unbind; + drm->vblank_disable_allowed = true; drm_kms_helper_poll_init(drm); drm_mode_config_reset(drm); From 56e4b1e183555c74097fa012f1606b22223f027b Mon Sep 17 00:00:00 2001 From: Bibby Hsieh Date: Thu, 29 Sep 2016 11:29:49 +0800 Subject: [PATCH 057/792] drm/mediatek: clear IRQ status before enable OVL interrupt To make sure that the first vblank IRQ after enabling vblank isn't too short or immediate, we have to clear the IRQ status before enable OVL interrupt. Signed-off-by: Bibby Hsieh Acked-by: CK Hu --- drivers/gpu/drm/mediatek/mtk_disp_ovl.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c index 019b7ca392d7..f75c5b5a536c 100644 --- a/drivers/gpu/drm/mediatek/mtk_disp_ovl.c +++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl.c @@ -80,6 +80,7 @@ static void mtk_ovl_enable_vblank(struct mtk_ddp_comp *comp, ddp_comp); priv->crtc = crtc; + writel(0x0, comp->regs + DISP_REG_OVL_INTSTA); writel_relaxed(OVL_FME_CPL_INT, comp->regs + DISP_REG_OVL_INTEN); } From d542b7c473f0eb34455974d66ea93653b3eb40ce Mon Sep 17 00:00:00 2001 From: Junzhi Zhao Date: Thu, 29 Sep 2016 11:02:13 +0800 Subject: [PATCH 058/792] drm/mediatek: do mtk_hdmi_send_infoframe after HDMI clock enable The mtk_hdmi_send_infoframe have to be run after PLL and PIXEL clock of HDMI enable. Make sure that HDMI inforframes can be sent successfully. Signed-off-by: Junzhi Zhao Signed-off-by: Bibby Hsieh --- drivers/gpu/drm/mediatek/mtk_hdmi.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi.c b/drivers/gpu/drm/mediatek/mtk_hdmi.c index 71227deef21b..0e8c4d9af340 100644 --- a/drivers/gpu/drm/mediatek/mtk_hdmi.c +++ b/drivers/gpu/drm/mediatek/mtk_hdmi.c @@ -1133,12 +1133,6 @@ static int mtk_hdmi_output_set_display_mode(struct mtk_hdmi *hdmi, phy_power_on(hdmi->phy); mtk_hdmi_aud_output_config(hdmi, mode); - mtk_hdmi_setup_audio_infoframe(hdmi); - mtk_hdmi_setup_avi_infoframe(hdmi, mode); - mtk_hdmi_setup_spd_infoframe(hdmi, "mediatek", "On-chip HDMI"); - if (mode->flags & DRM_MODE_FLAG_3D_MASK) - mtk_hdmi_setup_vendor_specific_infoframe(hdmi, mode); - mtk_hdmi_hw_vid_black(hdmi, false); mtk_hdmi_hw_aud_unmute(hdmi); mtk_hdmi_hw_send_av_unmute(hdmi); @@ -1401,6 +1395,16 @@ static void mtk_hdmi_bridge_pre_enable(struct drm_bridge *bridge) hdmi->powered = true; } +static void mtk_hdmi_send_infoframe(struct mtk_hdmi *hdmi, + struct drm_display_mode *mode) +{ + mtk_hdmi_setup_audio_infoframe(hdmi); + mtk_hdmi_setup_avi_infoframe(hdmi, mode); + mtk_hdmi_setup_spd_infoframe(hdmi, "mediatek", "On-chip HDMI"); + if (mode->flags & DRM_MODE_FLAG_3D_MASK) + mtk_hdmi_setup_vendor_specific_infoframe(hdmi, mode); +} + static void mtk_hdmi_bridge_enable(struct drm_bridge *bridge) { struct mtk_hdmi *hdmi = hdmi_ctx_from_bridge(bridge); @@ -1409,6 +1413,7 @@ static void mtk_hdmi_bridge_enable(struct drm_bridge *bridge) clk_prepare_enable(hdmi->clk[MTK_HDMI_CLK_HDMI_PLL]); clk_prepare_enable(hdmi->clk[MTK_HDMI_CLK_HDMI_PIXEL]); phy_power_on(hdmi->phy); + mtk_hdmi_send_infoframe(hdmi, &hdmi->mode); hdmi->enabled = true; } From 968253bd7caae5621f6806dd5055353fe33d366e Mon Sep 17 00:00:00 2001 From: Junzhi Zhao Date: Thu, 29 Sep 2016 11:02:14 +0800 Subject: [PATCH 059/792] drm/mediatek: enhance the HDMI driving current In order to improve 4K resolution performance, we have to enhance the HDMI driving current when clock rate is greater than 165MHz. Signed-off-by: Junzhi Zhao Signed-off-by: Bibby Hsieh --- .../gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c | 42 +++++++++++++------ 1 file changed, 30 insertions(+), 12 deletions(-) diff --git a/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c b/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c index 8a24754b440f..51cb9cfb6646 100644 --- a/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c +++ b/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c @@ -265,6 +265,9 @@ static int mtk_hdmi_pll_set_rate(struct clk_hw *hw, unsigned long rate, struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw); unsigned int pre_div; unsigned int div; + unsigned int pre_ibias; + unsigned int hdmi_ibias; + unsigned int imp_en; dev_dbg(hdmi_phy->dev, "%s: %lu Hz, parent: %lu Hz\n", __func__, rate, parent_rate); @@ -298,18 +301,31 @@ static int mtk_hdmi_pll_set_rate(struct clk_hw *hw, unsigned long rate, (0x1 << PLL_BR_SHIFT), RG_HDMITX_PLL_BP | RG_HDMITX_PLL_BC | RG_HDMITX_PLL_BR); - mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON3, RG_HDMITX_PRD_IMP_EN); + if (rate < 165000000) { + mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON3, + RG_HDMITX_PRD_IMP_EN); + pre_ibias = 0x3; + imp_en = 0x0; + hdmi_ibias = hdmi_phy->ibias; + } else { + mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON3, + RG_HDMITX_PRD_IMP_EN); + pre_ibias = 0x6; + imp_en = 0xf; + hdmi_ibias = hdmi_phy->ibias_up; + } mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON4, - (0x3 << PRD_IBIAS_CLK_SHIFT) | - (0x3 << PRD_IBIAS_D2_SHIFT) | - (0x3 << PRD_IBIAS_D1_SHIFT) | - (0x3 << PRD_IBIAS_D0_SHIFT), + (pre_ibias << PRD_IBIAS_CLK_SHIFT) | + (pre_ibias << PRD_IBIAS_D2_SHIFT) | + (pre_ibias << PRD_IBIAS_D1_SHIFT) | + (pre_ibias << PRD_IBIAS_D0_SHIFT), RG_HDMITX_PRD_IBIAS_CLK | RG_HDMITX_PRD_IBIAS_D2 | RG_HDMITX_PRD_IBIAS_D1 | RG_HDMITX_PRD_IBIAS_D0); mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON3, - (0x0 << DRV_IMP_EN_SHIFT), RG_HDMITX_DRV_IMP_EN); + (imp_en << DRV_IMP_EN_SHIFT), + RG_HDMITX_DRV_IMP_EN); mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (hdmi_phy->drv_imp_clk << DRV_IMP_CLK_SHIFT) | (hdmi_phy->drv_imp_d2 << DRV_IMP_D2_SHIFT) | @@ -318,12 +334,14 @@ static int mtk_hdmi_pll_set_rate(struct clk_hw *hw, unsigned long rate, RG_HDMITX_DRV_IMP_CLK | RG_HDMITX_DRV_IMP_D2 | RG_HDMITX_DRV_IMP_D1 | RG_HDMITX_DRV_IMP_D0); mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON5, - (hdmi_phy->ibias << DRV_IBIAS_CLK_SHIFT) | - (hdmi_phy->ibias << DRV_IBIAS_D2_SHIFT) | - (hdmi_phy->ibias << DRV_IBIAS_D1_SHIFT) | - (hdmi_phy->ibias << DRV_IBIAS_D0_SHIFT), - RG_HDMITX_DRV_IBIAS_CLK | RG_HDMITX_DRV_IBIAS_D2 | - RG_HDMITX_DRV_IBIAS_D1 | RG_HDMITX_DRV_IBIAS_D0); + (hdmi_ibias << DRV_IBIAS_CLK_SHIFT) | + (hdmi_ibias << DRV_IBIAS_D2_SHIFT) | + (hdmi_ibias << DRV_IBIAS_D1_SHIFT) | + (hdmi_ibias << DRV_IBIAS_D0_SHIFT), + RG_HDMITX_DRV_IBIAS_CLK | + RG_HDMITX_DRV_IBIAS_D2 | + RG_HDMITX_DRV_IBIAS_D1 | + RG_HDMITX_DRV_IBIAS_D0); return 0; } From 0d2200794f0a2c1ebb3b6613842914d8ce4b67f9 Mon Sep 17 00:00:00 2001 From: Junzhi Zhao Date: Thu, 29 Sep 2016 11:02:15 +0800 Subject: [PATCH 060/792] drm/mediatek: modify the factor to make the pll_rate set in the 1G-2G range Currently, the code sets the "pll" to the desired multiple of the pixel clock manully(4*3m 8*3,etc). The valid range of the pll is 1G-2G, however, when the pixel clock is bigger than 167MHz, the "pll" will be set to a invalid value( > 2G), then the "pll" will be 2GHz, thus the pixel clock will be in correct. Change the factor to make the "pll" be set in the (1G, 2G) range. Signed-off-by: Junzhi Zhao Signed-off-by: Bibby Hsieh --- drivers/gpu/drm/mediatek/mtk_dpi.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c index 0186e500d2a5..90fb831ef031 100644 --- a/drivers/gpu/drm/mediatek/mtk_dpi.c +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c @@ -432,11 +432,16 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi, unsigned long pll_rate; unsigned int factor; + /* let pll_rate can fix the valid range of tvdpll (1G~2GHz) */ pix_rate = 1000UL * mode->clock; - if (mode->clock <= 74000) + if (mode->clock <= 27000) + factor = 16 * 3; + else if (mode->clock <= 84000) factor = 8 * 3; - else + else if (mode->clock <= 167000) factor = 4 * 3; + else + factor = 2 * 3; pll_rate = pix_rate * factor; dev_dbg(dpi->dev, "Want PLL %lu Hz, pixel clock %lu Hz\n", From faead41cc7213ccef5a58c1bf518ac24816fe8a6 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 22 Sep 2016 10:31:41 +0200 Subject: [PATCH 061/792] iwlwifi: pcie: mark command queue lock with separate lockdep class Emmanuel reports that when CMD_WANT_ASYNC_CALLBACK is used by mvm, the callback will be called with the command queue lock held, and mvm will try to stop all (other) TX queues, which acquires their locks - this caused a false lockdep recursive locking report. Suppress this report by marking the command queue lock with a new, separate, lock class so lockdep can tell the difference between the two types of queues. Fixes: 156f92f2b471 ("iwlwifi: block the queues when we send ADD_STA for uAPSD") Reported-by: Emmanuel Grumbach Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/pcie/tx.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/tx.c b/drivers/net/wireless/intel/iwlwifi/pcie/tx.c index e9a278b60dfd..5f840f16f40b 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/tx.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/tx.c @@ -592,6 +592,7 @@ error: static int iwl_pcie_txq_init(struct iwl_trans *trans, struct iwl_txq *txq, int slots_num, u32 txq_id) { + struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans); int ret; txq->need_update = false; @@ -606,6 +607,13 @@ static int iwl_pcie_txq_init(struct iwl_trans *trans, struct iwl_txq *txq, return ret; spin_lock_init(&txq->lock); + + if (txq_id == trans_pcie->cmd_queue) { + static struct lock_class_key iwl_pcie_cmd_queue_lock_class; + + lockdep_set_class(&txq->lock, &iwl_pcie_cmd_queue_lock_class); + } + __skb_queue_head_init(&txq->overflow_q); /* From 276c4b4b74b6d5bc3cab35534409f3ad32464b78 Mon Sep 17 00:00:00 2001 From: Luca Coelho Date: Wed, 28 Sep 2016 11:32:35 +0300 Subject: [PATCH 062/792] iwlwifi: mvm: use ssize_t for len in iwl_debugfs_mem_read() In iwl_dbgfs_mem_read(), the len variable may become negative and is compared to < 0 (an error case). Comparing size_t (which is unsigned) to < 0 causes a warning on certain platforms (like i386): drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c:1561:5-8: WARNING: Unsigned expression compared with zero: len < 0 To prevent that, use ssize_t for len instead. Fixes: commit 2b55f43f8e47 ("iwlwifi: mvm: Add mem debugfs entry") Reported-by: kbuild test robot Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c b/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c index 539d718df797..06805a63f091 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c @@ -1529,8 +1529,8 @@ static ssize_t iwl_dbgfs_mem_read(struct file *file, char __user *user_buf, .data = { &cmd, }, .len = { sizeof(cmd) }, }; - size_t delta, len; - ssize_t ret; + size_t delta; + ssize_t ret, len; hcmd.id = iwl_cmd_id(*ppos >> 24 ? UMAC_RD_WR : LMAC_RD_WR, DEBUG_GROUP, 0); From 85cd69b8f1f7e289fe931a82889e673fd0f04842 Mon Sep 17 00:00:00 2001 From: Luca Coelho Date: Wed, 5 Oct 2016 11:24:12 +0300 Subject: [PATCH 063/792] iwlwifi: mvm: fix d3_test with unified D0/D3 images When a unified D0/D3 image is used, we don't restart the FW in the D0->D3->D0 transitions. Therefore, the d3_test functionality should not call ieee8021_restart_hw() when the resuming either. Fixes: commit 23ae61282b88 ("iwlwifi: mvm: Do not switch to D3 image on suspend") Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/d3.c | 25 ++++++++++++--------- 1 file changed, 15 insertions(+), 10 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/d3.c b/drivers/net/wireless/intel/iwlwifi/mvm/d3.c index 4fdc3dad3e85..0e17cb238643 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/d3.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/d3.c @@ -2271,7 +2271,8 @@ static void iwl_mvm_d3_test_disconn_work_iter(void *_data, u8 *mac, static int iwl_mvm_d3_test_release(struct inode *inode, struct file *file) { struct iwl_mvm *mvm = inode->i_private; - int remaining_time = 10; + bool unified_image = fw_has_capa(&mvm->fw->ucode_capa, + IWL_UCODE_TLV_CAPA_CNSLDTD_D3_D0_IMG); mvm->d3_test_active = false; @@ -2282,18 +2283,22 @@ static int iwl_mvm_d3_test_release(struct inode *inode, struct file *file) mvm->trans->system_pm_mode = IWL_PLAT_PM_MODE_DISABLED; iwl_abort_notification_waits(&mvm->notif_wait); - ieee80211_restart_hw(mvm->hw); + if (!unified_image) { + int remaining_time = 10; - /* wait for restart and disconnect all interfaces */ - while (test_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status) && - remaining_time > 0) { - remaining_time--; - msleep(1000); + ieee80211_restart_hw(mvm->hw); + + /* wait for restart and disconnect all interfaces */ + while (test_bit(IWL_MVM_STATUS_IN_HW_RESTART, &mvm->status) && + remaining_time > 0) { + remaining_time--; + msleep(1000); + } + + if (remaining_time == 0) + IWL_ERR(mvm, "Timed out waiting for HW restart!\n"); } - if (remaining_time == 0) - IWL_ERR(mvm, "Timed out waiting for HW restart to finish!\n"); - ieee80211_iterate_active_interfaces_atomic( mvm->hw, IEEE80211_IFACE_ITER_NORMAL, iwl_mvm_d3_test_disconn_work_iter, mvm->keep_vif); From 5bfadc8255e2cd92be7538fd7dfa777c27f58be0 Mon Sep 17 00:00:00 2001 From: Haim Dreyfuss Date: Mon, 12 Sep 2016 10:24:19 +0300 Subject: [PATCH 064/792] iwlwifi: mvm: comply with fw_restart mod param on suspend If the suspend flow fails, we restart the hardware to go back to the D0 image (with non-unified images), but we don't comply with the fw_restart module parameter. If something goes wrong when starting the D3 image, we may want to debug it, so we should comply with the fw_restart flag to avoid clearing everything up and losing the firmware state when the error occurred. Signed-off-by: Haim Dreyfuss Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/d3.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/d3.c b/drivers/net/wireless/intel/iwlwifi/mvm/d3.c index 0e17cb238643..03a8fc586548 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/d3.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/d3.c @@ -1254,7 +1254,10 @@ static int __iwl_mvm_suspend(struct ieee80211_hw *hw, out: if (ret < 0) { iwl_mvm_ref(mvm, IWL_MVM_REF_UCODE_DOWN); - ieee80211_restart_hw(mvm->hw); + if (mvm->restart_fw > 0) { + mvm->restart_fw--; + ieee80211_restart_hw(mvm->hw); + } iwl_mvm_free_nd(mvm); } out_noreset: From 3a732c65de427fdae67a243fd331356034b5a1e8 Mon Sep 17 00:00:00 2001 From: Sara Sharon Date: Sun, 9 Oct 2016 17:34:24 +0300 Subject: [PATCH 065/792] iwlwifi: mvm: wake the wait queue when the RX sync counter is zero When we sync the RX queues the driver waits to receive echo notification on all the RX queues. The wait queue is set with timeout until all queues have received the notification. However, iwl_mvm_rx_queue_notif() never woke up the wait queue, with the result of the counter value being checked only when the timeout expired. This may cause a latency of up to 1 second. Fixes: 0636b938214c ("iwlwifi: mvm: implement driver RX queues sync command") Signed-off-by: Sara Sharon Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 3 +-- drivers/net/wireless/intel/iwlwifi/mvm/mvm.h | 1 + drivers/net/wireless/intel/iwlwifi/mvm/ops.c | 1 + drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c | 3 ++- 4 files changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c index 318efd814037..1db1dc13e988 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c @@ -4121,7 +4121,6 @@ void iwl_mvm_sync_rx_queues_internal(struct iwl_mvm *mvm, struct iwl_mvm_internal_rxq_notif *notif, u32 size) { - DECLARE_WAIT_QUEUE_HEAD_ONSTACK(notif_waitq); u32 qmask = BIT(mvm->trans->num_rx_queues) - 1; int ret; @@ -4143,7 +4142,7 @@ void iwl_mvm_sync_rx_queues_internal(struct iwl_mvm *mvm, } if (notif->sync) - ret = wait_event_timeout(notif_waitq, + ret = wait_event_timeout(mvm->rx_sync_waitq, atomic_read(&mvm->queue_sync_counter) == 0, HZ); WARN_ON_ONCE(!ret); diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h index d17cbf603f7c..c60703e0c246 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h @@ -937,6 +937,7 @@ struct iwl_mvm { /* sync d0i3_tx queue and IWL_MVM_STATUS_IN_D0I3 status flag */ spinlock_t d0i3_tx_lock; wait_queue_head_t d0i3_exit_waitq; + wait_queue_head_t rx_sync_waitq; /* BT-Coex */ struct iwl_bt_coex_profile_notif last_bt_notif; diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/ops.c b/drivers/net/wireless/intel/iwlwifi/mvm/ops.c index 05fe6dd1a2c8..4d35deb628bc 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/ops.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/ops.c @@ -619,6 +619,7 @@ iwl_op_mode_mvm_start(struct iwl_trans *trans, const struct iwl_cfg *cfg, spin_lock_init(&mvm->refs_lock); skb_queue_head_init(&mvm->d0i3_tx); init_waitqueue_head(&mvm->d0i3_exit_waitq); + init_waitqueue_head(&mvm->rx_sync_waitq); atomic_set(&mvm->queue_sync_counter, 0); diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c index a57c6ef5bc14..6c802cee900c 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c @@ -547,7 +547,8 @@ void iwl_mvm_rx_queue_notif(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb, "Received expired RX queue sync message\n"); return; } - atomic_dec(&mvm->queue_sync_counter); + if (!atomic_dec_return(&mvm->queue_sync_counter)) + wake_up(&mvm->rx_sync_waitq); } switch (internal_notif->type) { From aa156c8aee22a24865bf94d0c4a5f604f687fa7d Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Fri, 14 Oct 2016 10:15:35 -0300 Subject: [PATCH 066/792] rtc: asm9260: fix module autoload If the driver is built as a module, autoload won't work because the module alias information is not filled so user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/rtc/rtc-asm9260.ko | grep alias $ After this patch: $ modinfo drivers/rtc/rtc-asm9260.ko | grep alias alias: of:N*T*Calphascale,asm9260-rtcC* alias: of:N*T*Calphascale,asm9260-rtc Signed-off-by: Javier Martinez Canillas Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-asm9260.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/rtc/rtc-asm9260.c b/drivers/rtc/rtc-asm9260.c index 18a93d3e3f93..d36534965635 100644 --- a/drivers/rtc/rtc-asm9260.c +++ b/drivers/rtc/rtc-asm9260.c @@ -327,6 +327,7 @@ static const struct of_device_id asm9260_dt_ids[] = { { .compatible = "alphascale,asm9260-rtc", }, {} }; +MODULE_DEVICE_TABLE(of, asm9260_dt_ids); static struct platform_driver asm9260_rtc_driver = { .probe = asm9260_rtc_probe, From a3a0673b9db6fad2a3f7874c34e4b5cbc5fa01c6 Mon Sep 17 00:00:00 2001 From: LABBE Corentin Date: Tue, 18 Oct 2016 16:39:54 +0200 Subject: [PATCH 067/792] rtc: cmos: remove all __exit_p annotations I got the following stack trace under qemu: [ 7.575243] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 [ 7.596098] IP: [] cmos_set_alarm+0x38/0x280 [ 7.615699] PGD 3ccbe067 [ 7.615923] PUD 3daf2067 [ 7.635156] PMD 0 [ 7.654358] Oops: 0000 [#1] SMP [ 7.673869] Modules linked in: [ 7.693235] CPU: 0 PID: 1701 Comm: hwclock Tainted: G W 4.9.0-rc1+ #24 [ 7.712455] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 [ 7.753569] task: ffff88003d88dc40 task.stack: ffffc90000224000 [ 7.773743] RIP: 0010:[] [] cmos_set_alarm+0x38/0x280 [ 7.794893] RSP: 0018:ffffc90000227c10 EFLAGS: 00010296 [ 7.815890] RAX: 000000000000001d RBX: ffffc90000227d28 RCX: ffffffff8182be78 [ 7.836057] RDX: 0000000000000001 RSI: 0000000000000202 RDI: 0000000000000202 [ 7.856612] RBP: ffffc90000227c48 R08: 0000000000000000 R09: 0000000000000001 [ 7.877561] R10: 00000000000001c0 R11: 00000000000001c0 R12: 0000000000000000 [ 7.897072] R13: ffff88003d96f400 R14: ffff88003dac6410 R15: ffff88003dac6420 [ 7.917403] FS: 00007f77f42d9700(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000 [ 7.938293] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7.958364] CR2: 0000000000000010 CR3: 000000003ccbb000 CR4: 00000000000006f0 [ 7.978028] Stack: [ 7.997120] ffff88003dac6000 ffff88003dac6410 0000000058049d01 ffffc90000227d28 [ 8.016993] ffff88003dac6000 ffff88003dac6410 ffff88003dac6420 ffffc90000227c98 [ 8.039505] ffffffff814f225d 0000001800227c98 000000090000002a 0000000900000011 [ 8.059985] Call Trace: [ 8.080110] [] __rtc_set_alarm+0x8d/0xa0 [ 8.099421] [] rtc_timer_enqueue+0x119/0x190 [ 8.119925] [] rtc_update_irq_enable+0xbe/0x100 [ 8.140583] [] rtc_dev_ioctl+0x3c0/0x480 [ 8.161162] [] ? user_path_at_empty+0x3a/0x50 [ 8.182717] [] do_vfs_ioctl+0x96/0x5c0 [ 8.204624] [] ? vfs_stat+0x16/0x20 [ 8.225994] [] ? SyS_newstat+0x15/0x30 [ 8.247043] [] SyS_ioctl+0x47/0x80 [ 8.267191] [] entry_SYSCALL_64_fastpath+0x1a/0xa9 [ 8.288719] Code: 6a 81 48 89 e5 41 57 41 56 41 55 49 89 fd 41 54 53 48 89 f3 48 c7 c6 20 c4 78 81 48 83 ec 10 e8 8f 00 ef ff 4d 8b a5 a0 00 00 00 <41> 8b 44 24 10 85 c0 0f 8e 2b 02 00 00 4c 89 ef 31 c0 b9 53 01 [ 8.335233] RIP [] cmos_set_alarm+0x38/0x280 [ 8.357096] RSP [ 8.379051] CR2: 0000000000000010 [ 8.401736] ---[ end trace 5cbcd83a1f225ed3 ]--- This occur only when CONFIG_DEBUG_TEST_DRIVER_REMOVE is enabled and CONFIG_RTC_DRV_CMOS builtin. When cmos_set_alarm() is called dev is NULL and so trigger the deref via cmos->irq The problem comes from that the device is removed but no remove function are called due to _exit_p(). This patch remove all _exit_p() annotation. Signed-off-by: Corentin Labbe Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-cmos.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c index dd3d59806ffa..6f0e12e66296 100644 --- a/drivers/rtc/rtc-cmos.c +++ b/drivers/rtc/rtc-cmos.c @@ -776,7 +776,7 @@ static void cmos_do_shutdown(int rtc_irq) spin_unlock_irq(&rtc_lock); } -static void __exit cmos_do_remove(struct device *dev) +static void cmos_do_remove(struct device *dev) { struct cmos_rtc *cmos = dev_get_drvdata(dev); struct resource *ports; @@ -1129,7 +1129,7 @@ static int cmos_pnp_probe(struct pnp_dev *pnp, const struct pnp_device_id *id) pnp_irq(pnp, 0)); } -static void __exit cmos_pnp_remove(struct pnp_dev *pnp) +static void cmos_pnp_remove(struct pnp_dev *pnp) { cmos_do_remove(&pnp->dev); } @@ -1161,7 +1161,7 @@ static struct pnp_driver cmos_pnp_driver = { .name = (char *) driver_name, .id_table = rtc_ids, .probe = cmos_pnp_probe, - .remove = __exit_p(cmos_pnp_remove), + .remove = cmos_pnp_remove, .shutdown = cmos_pnp_shutdown, /* flag ensures resume() gets called, and stops syslog spam */ @@ -1238,7 +1238,7 @@ static int __init cmos_platform_probe(struct platform_device *pdev) return cmos_do_probe(&pdev->dev, resource, irq); } -static int __exit cmos_platform_remove(struct platform_device *pdev) +static int cmos_platform_remove(struct platform_device *pdev) { cmos_do_remove(&pdev->dev); return 0; @@ -1263,7 +1263,7 @@ static void cmos_platform_shutdown(struct platform_device *pdev) MODULE_ALIAS("platform:rtc_cmos"); static struct platform_driver cmos_platform_driver = { - .remove = __exit_p(cmos_platform_remove), + .remove = cmos_platform_remove, .shutdown = cmos_platform_shutdown, .driver = { .name = driver_name, From e0d9727c111a5917a1184c71c1a8e6f78c7fc41d Mon Sep 17 00:00:00 2001 From: Luca Coelho Date: Thu, 13 Oct 2016 10:07:07 +0300 Subject: [PATCH 068/792] iwlwifi: pcie: fix SPLC structure parsing The SPLC data parsing is too restrictive and was not trying find the correct element for WiFi. This causes problems with some BIOSes where the SPLC method exists, but doesn't have a WiFi entry on the first element of the list. The domain type values are also incorrect according to the specification. Fix this by complying with the actual specification. Additionally, replace all occurrences of SPLX to SPLC, since SPLX is only a structure internal to the ACPI tables, and may not even exist. Fixes: bcb079a14d75 ("iwlwifi: pcie: retrieve and parse ACPI power limitations") Reported-by: Chris Rorvick Tested-by: Paul Bolle Tested-by: Chris Rorvick Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/pcie/drv.c | 81 +++++++++++-------- 1 file changed, 49 insertions(+), 32 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c index 001be406a3d3..2f8134b2a504 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c @@ -541,48 +541,64 @@ static const struct pci_device_id iwl_hw_card_ids[] = { MODULE_DEVICE_TABLE(pci, iwl_hw_card_ids); #ifdef CONFIG_ACPI -#define SPL_METHOD "SPLC" -#define SPL_DOMAINTYPE_MODULE BIT(0) -#define SPL_DOMAINTYPE_WIFI BIT(1) -#define SPL_DOMAINTYPE_WIGIG BIT(2) -#define SPL_DOMAINTYPE_RFEM BIT(3) +#define ACPI_SPLC_METHOD "SPLC" +#define ACPI_SPLC_DOMAIN_WIFI (0x07) -static u64 splx_get_pwr_limit(struct iwl_trans *trans, union acpi_object *splx) +static u64 splc_get_pwr_limit(struct iwl_trans *trans, union acpi_object *splc) { - union acpi_object *limits, *domain_type, *power_limit; + union acpi_object *data_pkg, *dflt_pwr_limit; + int i; - if (splx->type != ACPI_TYPE_PACKAGE || - splx->package.count != 2 || - splx->package.elements[0].type != ACPI_TYPE_INTEGER || - splx->package.elements[0].integer.value != 0) { - IWL_ERR(trans, "Unsupported splx structure\n"); + /* We need at least two elements, one for the revision and one + * for the data itself. Also check that the revision is + * supported (currently only revision 0). + */ + if (splc->type != ACPI_TYPE_PACKAGE || + splc->package.count < 2 || + splc->package.elements[0].type != ACPI_TYPE_INTEGER || + splc->package.elements[0].integer.value != 0) { + IWL_DEBUG_INFO(trans, + "Unsupported structure returned by the SPLC method. Ignoring.\n"); return 0; } - limits = &splx->package.elements[1]; - if (limits->type != ACPI_TYPE_PACKAGE || - limits->package.count < 2 || - limits->package.elements[0].type != ACPI_TYPE_INTEGER || - limits->package.elements[1].type != ACPI_TYPE_INTEGER) { - IWL_ERR(trans, "Invalid limits element\n"); + /* loop through all the packages to find the one for WiFi */ + for (i = 1; i < splc->package.count; i++) { + union acpi_object *domain; + + data_pkg = &splc->package.elements[i]; + + /* Skip anything that is not a package with the right + * amount of elements (i.e. at least 2 integers). + */ + if (data_pkg->type != ACPI_TYPE_PACKAGE || + data_pkg->package.count < 2 || + data_pkg->package.elements[0].type != ACPI_TYPE_INTEGER || + data_pkg->package.elements[1].type != ACPI_TYPE_INTEGER) + continue; + + domain = &data_pkg->package.elements[0]; + if (domain->integer.value == ACPI_SPLC_DOMAIN_WIFI) + break; + + data_pkg = NULL; + } + + if (!data_pkg) { + IWL_DEBUG_INFO(trans, + "No element for the WiFi domain returned by the SPLC method.\n"); return 0; } - domain_type = &limits->package.elements[0]; - power_limit = &limits->package.elements[1]; - if (!(domain_type->integer.value & SPL_DOMAINTYPE_WIFI)) { - IWL_DEBUG_INFO(trans, "WiFi power is not limited\n"); - return 0; - } - - return power_limit->integer.value; + dflt_pwr_limit = &data_pkg->package.elements[1]; + return dflt_pwr_limit->integer.value; } static void set_dflt_pwr_limit(struct iwl_trans *trans, struct pci_dev *pdev) { acpi_handle pxsx_handle; acpi_handle handle; - struct acpi_buffer splx = {ACPI_ALLOCATE_BUFFER, NULL}; + struct acpi_buffer splc = {ACPI_ALLOCATE_BUFFER, NULL}; acpi_status status; pxsx_handle = ACPI_HANDLE(&pdev->dev); @@ -593,23 +609,24 @@ static void set_dflt_pwr_limit(struct iwl_trans *trans, struct pci_dev *pdev) } /* Get the method's handle */ - status = acpi_get_handle(pxsx_handle, (acpi_string)SPL_METHOD, &handle); + status = acpi_get_handle(pxsx_handle, (acpi_string)ACPI_SPLC_METHOD, + &handle); if (ACPI_FAILURE(status)) { - IWL_DEBUG_INFO(trans, "SPL method not found\n"); + IWL_DEBUG_INFO(trans, "SPLC method not found\n"); return; } /* Call SPLC with no arguments */ - status = acpi_evaluate_object(handle, NULL, NULL, &splx); + status = acpi_evaluate_object(handle, NULL, NULL, &splc); if (ACPI_FAILURE(status)) { IWL_ERR(trans, "SPLC invocation failed (0x%x)\n", status); return; } - trans->dflt_pwr_limit = splx_get_pwr_limit(trans, splx.pointer); + trans->dflt_pwr_limit = splc_get_pwr_limit(trans, splc.pointer); IWL_DEBUG_INFO(trans, "Default power limit set to %lld\n", trans->dflt_pwr_limit); - kfree(splx.pointer); + kfree(splc.pointer); } #else /* CONFIG_ACPI */ From 5a143db8c4a28dab6423cb6197e9f1389da375f2 Mon Sep 17 00:00:00 2001 From: Luca Coelho Date: Wed, 5 Oct 2016 09:28:53 +0300 Subject: [PATCH 069/792] iwlwifi: mvm: fix netdetect starting/stopping for unified images With unified images, we need to make sure the net-detect scan is stopped after resuming, since we don't restart the FW. Also, we need to make sure we check if there are enough scan slots available to run it, as we do with other scans. Fixes: commit 23ae61282b88 ("iwlwifi: mvm: Do not switch to D3 image on suspend") Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/d3.c | 19 +++++++++++ drivers/net/wireless/intel/iwlwifi/mvm/scan.c | 33 +++++++++++++++---- 2 files changed, 46 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/d3.c b/drivers/net/wireless/intel/iwlwifi/mvm/d3.c index 03a8fc586548..b88e2048ae0b 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/d3.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/d3.c @@ -1087,6 +1087,15 @@ iwl_mvm_netdetect_config(struct iwl_mvm *mvm, ret = iwl_mvm_switch_to_d3(mvm); if (ret) return ret; + } else { + /* In theory, we wouldn't have to stop a running sched + * scan in order to start another one (for + * net-detect). But in practice this doesn't seem to + * work properly, so stop any running sched_scan now. + */ + ret = iwl_mvm_scan_stop(mvm, IWL_MVM_SCAN_SCHED, true); + if (ret) + return ret; } /* rfkill release can be either for wowlan or netdetect */ @@ -2091,6 +2100,16 @@ static int __iwl_mvm_resume(struct iwl_mvm *mvm, bool test) iwl_mvm_update_changed_regdom(mvm); if (mvm->net_detect) { + /* If this is a non-unified image, we restart the FW, + * so no need to stop the netdetect scan. If that + * fails, continue and try to get the wake-up reasons, + * but trigger a HW restart by keeping a failure code + * in ret. + */ + if (unified_image) + ret = iwl_mvm_scan_stop(mvm, IWL_MVM_SCAN_NETDETECT, + false); + iwl_mvm_query_netdetect_reasons(mvm, vif); /* has unlocked the mutex, so skip that */ goto out; diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c index f279fdd6eb44..fa9743205491 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/scan.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/scan.c @@ -1199,6 +1199,9 @@ static int iwl_mvm_num_scans(struct iwl_mvm *mvm) static int iwl_mvm_check_running_scans(struct iwl_mvm *mvm, int type) { + bool unified_image = fw_has_capa(&mvm->fw->ucode_capa, + IWL_UCODE_TLV_CAPA_CNSLDTD_D3_D0_IMG); + /* This looks a bit arbitrary, but the idea is that if we run * out of possible simultaneous scans and the userspace is * trying to run a scan type that is already running, we @@ -1225,12 +1228,30 @@ static int iwl_mvm_check_running_scans(struct iwl_mvm *mvm, int type) return -EBUSY; return iwl_mvm_scan_stop(mvm, IWL_MVM_SCAN_REGULAR, true); case IWL_MVM_SCAN_NETDETECT: - /* No need to stop anything for net-detect since the - * firmware is restarted anyway. This way, any sched - * scans that were running will be restarted when we - * resume. - */ - return 0; + /* For non-unified images, there's no need to stop + * anything for net-detect since the firmware is + * restarted anyway. This way, any sched scans that + * were running will be restarted when we resume. + */ + if (!unified_image) + return 0; + + /* If this is a unified image and we ran out of scans, + * we need to stop something. Prefer stopping regular + * scans, because the results are useless at this + * point, and we should be able to keep running + * another scheduled scan while suspended. + */ + if (mvm->scan_status & IWL_MVM_SCAN_REGULAR_MASK) + return iwl_mvm_scan_stop(mvm, IWL_MVM_SCAN_REGULAR, + true); + if (mvm->scan_status & IWL_MVM_SCAN_SCHED_MASK) + return iwl_mvm_scan_stop(mvm, IWL_MVM_SCAN_SCHED, + true); + + /* fall through, something is wrong if no scan was + * running but we ran out of scans. + */ default: WARN_ON(1); break; From a17b9e4c9c5e9c4da4385908af0377af11529266 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Tue, 18 Oct 2016 13:42:09 +0800 Subject: [PATCH 070/792] clk: sunxi-ng: sun6i-a31: Force AHB1 clock to use PLL6 as parent On the A31, the DMA engine only works if AHB1 is clocked from PLL6. In addition, the hstimer is clocked from AHB1, and if AHB1 is clocked from the CPU clock, and cpufreq is working, we get an unstable timer. Force the AHB1 clock to use PLL6 as its parent. Previously this was done in the device tree with the assigned-clocks and assigned-clocks-parent bindings. However with this new monolithic driver, the system critical clocks aren't exported through the device tree. The alternative is to force this setting in the driver before the clocks are registered. This is also done in newer versions of mainline U-boot. But people still using an older version, or even the vendor version, can still hit this issue. Hence the need to do it in the kernel as well. Reported-by: Hans de Goede Reported-by: Maxime Ripard Fixes: c6e6c96d8fa6 ("clk: sunxi-ng: Add A31/A31s clocks") Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- drivers/clk/sunxi-ng/ccu-sun6i-a31.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/clk/sunxi-ng/ccu-sun6i-a31.c b/drivers/clk/sunxi-ng/ccu-sun6i-a31.c index 79596463e0d9..4a82a49cff5e 100644 --- a/drivers/clk/sunxi-ng/ccu-sun6i-a31.c +++ b/drivers/clk/sunxi-ng/ccu-sun6i-a31.c @@ -191,6 +191,8 @@ static struct clk_div_table axi_div_table[] = { static SUNXI_CCU_DIV_TABLE(axi_clk, "axi", "cpu", 0x050, 0, 3, axi_div_table, 0); +#define SUN6I_A31_AHB1_REG 0x054 + static const char * const ahb1_parents[] = { "osc32k", "osc24M", "axi", "pll-periph" }; @@ -1230,6 +1232,16 @@ static void __init sun6i_a31_ccu_setup(struct device_node *node) val &= BIT(16); writel(val, reg + SUN6I_A31_PLL_MIPI_REG); + /* Force AHB1 to PLL6 / 3 */ + val = readl(reg + SUN6I_A31_AHB1_REG); + /* set PLL6 pre-div = 3 */ + val &= ~GENMASK(7, 6); + val |= 0x2 << 6; + /* select PLL6 / pre-div */ + val &= ~GENMASK(13, 12); + val |= 0x3 << 12; + writel(val, reg + SUN6I_A31_AHB1_REG); + sunxi_ccu_probe(node, reg, &sun6i_a31_ccu_desc); ccu_mux_notifier_register(pll_cpu_clk.common.hw.clk, From da25311c7ca8b0254a686fc0d597075b9aa3b683 Mon Sep 17 00:00:00 2001 From: Patrick Scheuring Date: Wed, 19 Oct 2016 12:04:02 -0700 Subject: [PATCH 071/792] Input: i8042 - add XMG C504 to keyboard reset table The Schenker XMG C504 is a rebranded Gigabyte P35 v2 laptop. Therefore it also needs a keyboard reset to detect the Elantech touchpad. Otherwise the touchpad appears to be dead. With this patch the touchpad is detected: $ dmesg | grep -E "(i8042|Elantech|elantech)" [ 2.675399] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.680372] i8042: Attempting to reset device connected to KBD port [ 2.789037] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.791586] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.813840] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 3.811431] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x361f0e) [ 3.825424] psmouse serio1: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0f. [ 3.839424] psmouse serio1: elantech: Elan sample query result 03, 58, 74 [ 3.911349] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6 Signed-off-by: Patrick Scheuring Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/serio/i8042-x86ia64io.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index f4bfb4b2d50a..073246c7d163 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -877,6 +877,13 @@ static const struct dmi_system_id __initconst i8042_dmi_kbdreset_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "P34"), }, }, + { + /* Schenker XMG C504 - Elantech touchpad */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "XMG"), + DMI_MATCH(DMI_PRODUCT_NAME, "C504"), + }, + }, { } }; From 446647d4b9b90335f29a06ec21a05b508e269866 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Wed, 19 Oct 2016 13:27:40 +0300 Subject: [PATCH 072/792] ideapad-laptop: Add another DMI entry for Yoga 900 This particular laptop has its motherboard replaced and after that, even with the latest BIOS, some DMI identification strings have become "INVALID". This includes DMI_PRODUCT_VERSION which results Wifi being blocked. It seems that DMI_BOARD_NAME is still valid so use that as an alternative for Lenovo Yoga 900. Signed-off-by: Mika Westerberg Signed-off-by: Darren Hart --- drivers/platform/x86/ideapad-laptop.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c index a2323941e677..a7614fc542b5 100644 --- a/drivers/platform/x86/ideapad-laptop.c +++ b/drivers/platform/x86/ideapad-laptop.c @@ -933,6 +933,13 @@ static const struct dmi_system_id no_hw_rfkill_list[] = { DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo YOGA 900"), }, }, + { + .ident = "Lenovo Yoga 900", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_BOARD_NAME, "VIUU4"), + }, + }, { .ident = "Lenovo YOGA 910-13IKB", .matches = { From 1c80e9603fe8341ed5bea696747d07083d5e0476 Mon Sep 17 00:00:00 2001 From: Azael Avalos Date: Thu, 25 Aug 2016 12:50:55 -0600 Subject: [PATCH 073/792] toshiba-wmi: Fix loading the driver on non Toshiba laptops Bug 150611 uncovered that the WMI ID used by the toshiba-wmi driver is not Toshiba specific, and as such, the driver was being loaded on non Toshiba laptops too. This patch adds a DMI matching list checking for TOSHIBA as the vendor, refusing to load if it is not. Also the WMI GUID was renamed, dropping the TOSHIBA_ prefix, to better reflect that such GUID is not a Toshiba specific one. Cc: # 4.4+ Signed-off-by: Azael Avalos Signed-off-by: Darren Hart --- drivers/platform/x86/toshiba-wmi.c | 26 +++++++++++++++++++------- 1 file changed, 19 insertions(+), 7 deletions(-) diff --git a/drivers/platform/x86/toshiba-wmi.c b/drivers/platform/x86/toshiba-wmi.c index feac4576b837..2df07ee8f3c3 100644 --- a/drivers/platform/x86/toshiba-wmi.c +++ b/drivers/platform/x86/toshiba-wmi.c @@ -24,14 +24,15 @@ #include #include #include +#include MODULE_AUTHOR("Azael Avalos"); MODULE_DESCRIPTION("Toshiba WMI Hotkey Driver"); MODULE_LICENSE("GPL"); -#define TOSHIBA_WMI_EVENT_GUID "59142400-C6A3-40FA-BADB-8A2652834100" +#define WMI_EVENT_GUID "59142400-C6A3-40FA-BADB-8A2652834100" -MODULE_ALIAS("wmi:"TOSHIBA_WMI_EVENT_GUID); +MODULE_ALIAS("wmi:"WMI_EVENT_GUID); static struct input_dev *toshiba_wmi_input_dev; @@ -63,6 +64,16 @@ static void toshiba_wmi_notify(u32 value, void *context) kfree(response.pointer); } +static struct dmi_system_id toshiba_wmi_dmi_table[] __initdata = { + { + .ident = "Toshiba laptop", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + }, + }, + {} +}; + static int __init toshiba_wmi_input_setup(void) { acpi_status status; @@ -81,7 +92,7 @@ static int __init toshiba_wmi_input_setup(void) if (err) goto err_free_dev; - status = wmi_install_notify_handler(TOSHIBA_WMI_EVENT_GUID, + status = wmi_install_notify_handler(WMI_EVENT_GUID, toshiba_wmi_notify, NULL); if (ACPI_FAILURE(status)) { err = -EIO; @@ -95,7 +106,7 @@ static int __init toshiba_wmi_input_setup(void) return 0; err_remove_notifier: - wmi_remove_notify_handler(TOSHIBA_WMI_EVENT_GUID); + wmi_remove_notify_handler(WMI_EVENT_GUID); err_free_keymap: sparse_keymap_free(toshiba_wmi_input_dev); err_free_dev: @@ -105,7 +116,7 @@ static int __init toshiba_wmi_input_setup(void) static void toshiba_wmi_input_destroy(void) { - wmi_remove_notify_handler(TOSHIBA_WMI_EVENT_GUID); + wmi_remove_notify_handler(WMI_EVENT_GUID); sparse_keymap_free(toshiba_wmi_input_dev); input_unregister_device(toshiba_wmi_input_dev); } @@ -114,7 +125,8 @@ static int __init toshiba_wmi_init(void) { int ret; - if (!wmi_has_guid(TOSHIBA_WMI_EVENT_GUID)) + if (!wmi_has_guid(WMI_EVENT_GUID) || + !dmi_check_system(toshiba_wmi_dmi_table)) return -ENODEV; ret = toshiba_wmi_input_setup(); @@ -130,7 +142,7 @@ static int __init toshiba_wmi_init(void) static void __exit toshiba_wmi_exit(void) { - if (wmi_has_guid(TOSHIBA_WMI_EVENT_GUID)) + if (wmi_has_guid(WMI_EVENT_GUID)) toshiba_wmi_input_destroy(); } From 5fb57ab328aaf313c5ad9c4c48900f632e7c6f1c Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Tue, 18 Oct 2016 12:30:36 +0200 Subject: [PATCH 074/792] drm/imx: ipuv3-plane: make sure x/y offsets are even in case of chroma subsampling Odd x/y offsets are not allowed for horizontally/vertically chroma subsampled planar YUV formats. Signed-off-by: Philipp Zabel Acked-by: Liu Ying --- drivers/gpu/drm/imx/ipuv3-plane.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/gpu/drm/imx/ipuv3-plane.c b/drivers/gpu/drm/imx/ipuv3-plane.c index 5c342997863e..e1ad844abafb 100644 --- a/drivers/gpu/drm/imx/ipuv3-plane.c +++ b/drivers/gpu/drm/imx/ipuv3-plane.c @@ -259,6 +259,7 @@ static int ipu_plane_atomic_check(struct drm_plane *plane, struct drm_framebuffer *fb = state->fb; struct drm_framebuffer *old_fb = old_state->fb; unsigned long eba, ubo, vbo, old_ubo, old_vbo; + int hsub, vsub; /* Ok to disable */ if (!fb) @@ -372,6 +373,16 @@ static int ipu_plane_atomic_check(struct drm_plane *plane, if (old_fb && old_fb->pitches[1] != fb->pitches[1]) crtc_state->mode_changed = true; + + /* + * The x/y offsets must be even in case of horizontal/vertical + * chroma subsampling. + */ + hsub = drm_format_horz_chroma_subsampling(fb->pixel_format); + vsub = drm_format_vert_chroma_subsampling(fb->pixel_format); + if (((state->src_x >> 16) & (hsub - 1)) || + ((state->src_y >> 16) & (vsub - 1))) + return -EINVAL; } return 0; From 86126748cd5063aa888ce252f16b89b35e7d4707 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Tue, 18 Oct 2016 17:09:30 +0200 Subject: [PATCH 075/792] drm/imx: ipuv3-plane: disable local alpha for planes without alpha channel Without this patch, after enabling the overlay plane with an RGBA framebuffer, switching to a framebuffer without alpha channel would cause the plane to vanish, since the pixel local alpha is constant zero in that case. Disable local alpha again when setting an opaque framebuffer. Signed-off-by: Philipp Zabel --- drivers/gpu/drm/imx/ipuv3-plane.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/imx/ipuv3-plane.c b/drivers/gpu/drm/imx/ipuv3-plane.c index e1ad844abafb..d5864ed4d772 100644 --- a/drivers/gpu/drm/imx/ipuv3-plane.c +++ b/drivers/gpu/drm/imx/ipuv3-plane.c @@ -437,6 +437,7 @@ static void ipu_plane_atomic_update(struct drm_plane *plane, ipu_dp_set_global_alpha(ipu_plane->dp, false, 0, false); break; default: + ipu_dp_set_global_alpha(ipu_plane->dp, true, 0, true); break; } } From 368e21aebe9535c1643b272aaa9819298a6bc3e5 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Wed, 19 Oct 2016 21:02:04 +0300 Subject: [PATCH 076/792] rtc: cmos: Don't enable interrupts in the middle of the interrupt handler MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Using spin_lock_irq()/spin_unlock_irq() from within the interrupt handler is a no-no. Let's save/restore the flags to avoid turning on interrupts prematurely. We hit this in a bunch of our CI systems, but for whatever reason I wasn't able to reproduce on my own machine, so this fix is just based on the backtrace. [ 202.634918] WARNING: CPU: 0 PID: 0 at kernel/locking/lockdep.c:2729 trace_hardirqs_on_caller+0x113/0x1b0 [ 202.634919] DEBUG_LOCKS_WARN_ON(current->hardirq_context) [ 202.634929] Modules linked in: snd_hda_intel i915 x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel lpc_ich snd_hda_codec_realtek snd_hda_codec_generic snd_hda_codec_hdmi snd_hda_codec snd_hwdep i2c_designware_platform i2c_designware_core snd_hda_core mei_me mei snd_pcm r8169 mii sdhci_acpi sdhci mmc_core i2c_hid [last unloaded: i915] [ 202.634930] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G U 4.9.0-rc1-CI-CI_DRM_1734+ #1 [ 202.634931] Hardware name: GIGABYTE M4HM87P-00/M4HM87P-00, BIOS F6 12/10/2014 [ 202.634933] ffff88011ea03d68 ffffffff8142dce5 ffff88011ea03db8 0000000000000000 [ 202.634934] ffff88011ea03da8 ffffffff8107e496 00000aa900000002 ffffffff81e249a0 [ 202.634935] ffffffff81815637 ffffffff82e7c280 0000000000000000 0000000000000004 [ 202.634936] Call Trace: [ 202.634939] [ 202.634939] [] dump_stack+0x67/0x92 [ 202.634941] [] __warn+0xc6/0xe0 [ 202.634944] [] ? _raw_spin_unlock_irq+0x27/0x50 [ 202.634945] [] warn_slowpath_fmt+0x4a/0x50 [ 202.634946] [] trace_hardirqs_on_caller+0x113/0x1b0 [ 202.634948] [] trace_hardirqs_on+0xd/0x10 [ 202.634949] [] _raw_spin_unlock_irq+0x27/0x50 [ 202.634951] [] rtc_handler+0x32/0xa0 [ 202.634954] [] acpi_ev_fixed_event_detect+0xd4/0xfb [ 202.634956] [] acpi_ev_sci_xrupt_handler+0xf/0x2d [ 202.634957] [] acpi_irq+0x11/0x2c [ 202.634960] [] __handle_irq_event_percpu+0x58/0x370 [ 202.634961] [] handle_irq_event_percpu+0x1e/0x50 [ 202.634962] [] handle_irq_event+0x34/0x60 [ 202.634963] [] handle_fasteoi_irq+0xa6/0x170 [ 202.634966] [] handle_irq+0x15/0x20 [ 202.634967] [] do_IRQ+0x68/0x130 [ 202.634968] [] common_interrupt+0x89/0x89 [ 202.634970] [ 202.634970] [] ? mwait_idle+0x93/0x210 [ 202.634971] [] ? mwait_idle+0x8a/0x210 [ 202.634972] [] arch_cpu_idle+0xa/0x10 [ 202.634973] [] default_idle_call+0x1e/0x30 [ 202.634974] [] cpu_startup_entry+0x17c/0x1f0 [ 202.634976] [] rest_init+0x127/0x130 [ 202.634978] [] start_kernel+0x3f6/0x403 [ 202.634980] [] x86_64_start_reservations+0x2a/0x2c [ 202.634981] [] x86_64_start_kernel+0x173/0x186 [ 202.634982] ---[ end trace 293c99618fa08d34 ]--- Cc: Gabriele Mazzotta Cc: Alexandre Belloni Fixes: 983bf1256edb ("rtc: cmos: Clear ACPI-driven alarms upon resume") Signed-off-by: Ville Syrjälä Reviewed-by: Chris Wilson Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-cmos.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c index 6f0e12e66296..7030d7cd3861 100644 --- a/drivers/rtc/rtc-cmos.c +++ b/drivers/rtc/rtc-cmos.c @@ -996,8 +996,9 @@ static u32 rtc_handler(void *context) struct cmos_rtc *cmos = dev_get_drvdata(dev); unsigned char rtc_control = 0; unsigned char rtc_intr; + unsigned long flags; - spin_lock_irq(&rtc_lock); + spin_lock_irqsave(&rtc_lock, flags); if (cmos_rtc.suspend_ctrl) rtc_control = CMOS_READ(RTC_CONTROL); if (rtc_control & RTC_AIE) { @@ -1006,7 +1007,7 @@ static u32 rtc_handler(void *context) rtc_intr = CMOS_READ(RTC_INTR_FLAGS); rtc_update_irq(cmos->rtc, 1, rtc_intr); } - spin_unlock_irq(&rtc_lock); + spin_unlock_irqrestore(&rtc_lock, flags); pm_wakeup_event(dev, 0); acpi_clear_event(ACPI_EVENT_RTC); From 77f7f71f5be1087823296f2dd8114ff7246ae877 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 14 Oct 2016 11:11:06 -0400 Subject: [PATCH 077/792] drm/amdgpu/powerplay/smu7: fix static checker warning Casting of voltage values to a larger size results in overwriting adjacent memory in the structure. Reviewed-by: Rex Zhu Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c index 609996c84ad5..13333d01d2ef 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c @@ -2127,15 +2127,18 @@ static int smu7_patch_acp_vddc(struct pp_hwmgr *hwmgr, } static int smu7_patch_limits_vddc(struct pp_hwmgr *hwmgr, - struct phm_clock_and_voltage_limits *tab) + struct phm_clock_and_voltage_limits *tab) { + uint32_t vddc, vddci; struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend); if (tab) { - smu7_patch_ppt_v0_with_vdd_leakage(hwmgr, (uint32_t *)&tab->vddc, - &data->vddc_leakage); - smu7_patch_ppt_v0_with_vdd_leakage(hwmgr, (uint32_t *)&tab->vddci, - &data->vddci_leakage); + smu7_patch_ppt_v0_with_vdd_leakage(hwmgr, &vddc, + &data->vddc_leakage); + tab->vddc = vddc; + smu7_patch_ppt_v0_with_vdd_leakage(hwmgr, &vddci, + &data->vddci_leakage); + tab->vddci = vddci; } return 0; From fb9a5b0c1c9893db2e0d18544fd49e19d784a87d Mon Sep 17 00:00:00 2001 From: Tom St Denis Date: Thu, 13 Oct 2016 12:38:07 -0400 Subject: [PATCH 078/792] drm/radeon/si_dpm: Limit clocks on HD86xx part Limit clocks on a specific HD86xx part to avoid crashes (while awaiting an appropriate PP fix). Signed-off-by: Tom St Denis Reviewed-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/si_dpm.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpu/drm/radeon/si_dpm.c b/drivers/gpu/drm/radeon/si_dpm.c index 89bdf20344ae..e22b11189628 100644 --- a/drivers/gpu/drm/radeon/si_dpm.c +++ b/drivers/gpu/drm/radeon/si_dpm.c @@ -3021,6 +3021,12 @@ static void si_apply_state_adjust_rules(struct radeon_device *rdev, max_sclk = 75000; max_mclk = 80000; } + /* limit clocks on HD8600 series */ + if (rdev->pdev->device == 0x6660 && + rdev->pdev->revision == 0x83) { + max_sclk = 75000; + max_mclk = 80000; + } if (rps->vce_active) { rps->evclk = rdev->pm.dpm.vce_states[rdev->pm.dpm.vce_level].evclk; From 08e23a02e3e2dd6dde0f2f5bb90d03f5bc2a5804 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 6 Oct 2016 11:25:25 -0400 Subject: [PATCH 079/792] drm/amdgpu: drop atom scratch save/restore in gpu reset MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This is already handled by the dce IP modules in their suspend and resume code. No need to do it again. Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index b4f4a9239069..2b0267494bca 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -2268,8 +2268,6 @@ int amdgpu_gpu_reset(struct amdgpu_device *adev) } if (need_full_reset) { - /* save scratch */ - amdgpu_atombios_scratch_regs_save(adev); r = amdgpu_suspend(adev); retry: @@ -2288,8 +2286,6 @@ retry: dev_info(adev->dev, "GPU reset succeeded, trying to resume\n"); r = amdgpu_resume(adev); } - /* restore scratch */ - amdgpu_atombios_scratch_regs_restore(adev); } if (!r) { amdgpu_irq_gpu_reset_resume_helper(adev); From e695e77c6b49c49e5eafdc6239d6b22bfa30c7cc Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 19 Oct 2016 14:40:58 -0400 Subject: [PATCH 080/792] drm/amdgpu: move atom scratch register save/restore to common code We need this for more than just DCE. Move it out of the DCE modules and into the device code. This way we can be sure the scratch registers are initialized properly before we run asic_init which happens before DCE IPs are restored. Fixes atombios hangs in asic_init. Reviewed-by: JimQu Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 5 ++++- drivers/gpu/drm/amd/amdgpu/dce_v10_0.c | 6 ------ drivers/gpu/drm/amd/amdgpu/dce_v11_0.c | 6 ------ drivers/gpu/drm/amd/amdgpu/dce_v6_0.c | 6 ------ drivers/gpu/drm/amd/amdgpu/dce_v8_0.c | 6 ------ 5 files changed, 4 insertions(+), 25 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index 2b0267494bca..7ca07e7b25c1 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -1959,6 +1959,7 @@ int amdgpu_device_suspend(struct drm_device *dev, bool suspend, bool fbcon) /* evict remaining vram memory */ amdgpu_bo_evict_vram(adev); + amdgpu_atombios_scratch_regs_save(adev); pci_save_state(dev->pdev); if (suspend) { /* Shut down the device */ @@ -2010,6 +2011,7 @@ int amdgpu_device_resume(struct drm_device *dev, bool resume, bool fbcon) return r; } } + amdgpu_atombios_scratch_regs_restore(adev); /* post card */ if (!amdgpu_card_posted(adev) || !resume) { @@ -2277,8 +2279,9 @@ retry: amdgpu_display_stop_mc_access(adev, &save); amdgpu_wait_for_idle(adev, AMD_IP_BLOCK_TYPE_GMC); } - + amdgpu_atombios_scratch_regs_save(adev); r = amdgpu_asic_reset(adev); + amdgpu_atombios_scratch_regs_restore(adev); /* post card */ amdgpu_atom_asic_init(adev->mode_info.atom_context); diff --git a/drivers/gpu/drm/amd/amdgpu/dce_v10_0.c b/drivers/gpu/drm/amd/amdgpu/dce_v10_0.c index 4108c686aa7c..9260caef74fa 100644 --- a/drivers/gpu/drm/amd/amdgpu/dce_v10_0.c +++ b/drivers/gpu/drm/amd/amdgpu/dce_v10_0.c @@ -3151,10 +3151,6 @@ static int dce_v10_0_hw_fini(void *handle) static int dce_v10_0_suspend(void *handle) { - struct amdgpu_device *adev = (struct amdgpu_device *)handle; - - amdgpu_atombios_scratch_regs_save(adev); - return dce_v10_0_hw_fini(handle); } @@ -3165,8 +3161,6 @@ static int dce_v10_0_resume(void *handle) ret = dce_v10_0_hw_init(handle); - amdgpu_atombios_scratch_regs_restore(adev); - /* turn on the BL */ if (adev->mode_info.bl_encoder) { u8 bl_level = amdgpu_display_backlight_get_level(adev, diff --git a/drivers/gpu/drm/amd/amdgpu/dce_v11_0.c b/drivers/gpu/drm/amd/amdgpu/dce_v11_0.c index f264b8f17ad1..367739bd1927 100644 --- a/drivers/gpu/drm/amd/amdgpu/dce_v11_0.c +++ b/drivers/gpu/drm/amd/amdgpu/dce_v11_0.c @@ -3215,10 +3215,6 @@ static int dce_v11_0_hw_fini(void *handle) static int dce_v11_0_suspend(void *handle) { - struct amdgpu_device *adev = (struct amdgpu_device *)handle; - - amdgpu_atombios_scratch_regs_save(adev); - return dce_v11_0_hw_fini(handle); } @@ -3229,8 +3225,6 @@ static int dce_v11_0_resume(void *handle) ret = dce_v11_0_hw_init(handle); - amdgpu_atombios_scratch_regs_restore(adev); - /* turn on the BL */ if (adev->mode_info.bl_encoder) { u8 bl_level = amdgpu_display_backlight_get_level(adev, diff --git a/drivers/gpu/drm/amd/amdgpu/dce_v6_0.c b/drivers/gpu/drm/amd/amdgpu/dce_v6_0.c index b948d6cb1399..15f9fc0514b2 100644 --- a/drivers/gpu/drm/amd/amdgpu/dce_v6_0.c +++ b/drivers/gpu/drm/amd/amdgpu/dce_v6_0.c @@ -2482,10 +2482,6 @@ static int dce_v6_0_hw_fini(void *handle) static int dce_v6_0_suspend(void *handle) { - struct amdgpu_device *adev = (struct amdgpu_device *)handle; - - amdgpu_atombios_scratch_regs_save(adev); - return dce_v6_0_hw_fini(handle); } @@ -2496,8 +2492,6 @@ static int dce_v6_0_resume(void *handle) ret = dce_v6_0_hw_init(handle); - amdgpu_atombios_scratch_regs_restore(adev); - /* turn on the BL */ if (adev->mode_info.bl_encoder) { u8 bl_level = amdgpu_display_backlight_get_level(adev, diff --git a/drivers/gpu/drm/amd/amdgpu/dce_v8_0.c b/drivers/gpu/drm/amd/amdgpu/dce_v8_0.c index 5966166ec94c..8c4d808db0f1 100644 --- a/drivers/gpu/drm/amd/amdgpu/dce_v8_0.c +++ b/drivers/gpu/drm/amd/amdgpu/dce_v8_0.c @@ -3033,10 +3033,6 @@ static int dce_v8_0_hw_fini(void *handle) static int dce_v8_0_suspend(void *handle) { - struct amdgpu_device *adev = (struct amdgpu_device *)handle; - - amdgpu_atombios_scratch_regs_save(adev); - return dce_v8_0_hw_fini(handle); } @@ -3047,8 +3043,6 @@ static int dce_v8_0_resume(void *handle) ret = dce_v8_0_hw_init(handle); - amdgpu_atombios_scratch_regs_restore(adev); - /* turn on the BL */ if (adev->mode_info.bl_encoder) { u8 bl_level = amdgpu_display_backlight_get_level(adev, From 1304f0c7ddd80b359282bb2077c8a7bc51f06c3a Mon Sep 17 00:00:00 2001 From: Evan Quan Date: Mon, 17 Oct 2016 09:49:29 +0800 Subject: [PATCH 081/792] drm/amd/amdgpu: expose max engine and memory clock for powerplay enabled case Signed-off-by: Evan Quan Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c index c2c7fb140338..203d98b00555 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c @@ -459,10 +459,8 @@ static int amdgpu_info_ioctl(struct drm_device *dev, void *data, struct drm_file /* return all clocks in KHz */ dev_info.gpu_counter_freq = amdgpu_asic_get_xclk(adev) * 10; if (adev->pm.dpm_enabled) { - dev_info.max_engine_clock = - adev->pm.dpm.dyn_state.max_clock_voltage_on_ac.sclk * 10; - dev_info.max_memory_clock = - adev->pm.dpm.dyn_state.max_clock_voltage_on_ac.mclk * 10; + dev_info.max_engine_clock = amdgpu_dpm_get_sclk(adev, false) * 10; + dev_info.max_memory_clock = amdgpu_dpm_get_mclk(adev, false) * 10; } else { dev_info.max_engine_clock = adev->pm.default_sclk * 10; dev_info.max_memory_clock = adev->pm.default_mclk * 10; From 0711257ee6d1e8bec08fdf26021f968d4d041e91 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 18 Oct 2016 00:32:00 -0400 Subject: [PATCH 082/792] drm/amdgpu/st: move ATC CG golden init from gfx to mc MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It's technically an MC register so make sure we initialize it in the MC module rather than the gfx module. Since other bits in the same register are used to enable ATC CG features make sure we apply the golden setting first. Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c | 1 - drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c | 1 + 2 files changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c index ee6a48a09214..bb97182dc749 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c @@ -640,7 +640,6 @@ static const u32 stoney_mgcg_cgcg_init[] = mmCP_MEM_SLP_CNTL, 0xffffffff, 0x00020201, mmRLC_MEM_SLP_CNTL, 0xffffffff, 0x00020201, mmCGTS_SM_CTRL_REG, 0xffffffff, 0x96940200, - mmATC_MISC_CG, 0xffffffff, 0x000c0200, }; static void gfx_v8_0_set_ring_funcs(struct amdgpu_device *adev); diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c index c22ef140a542..a16b2201d52c 100644 --- a/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c @@ -100,6 +100,7 @@ static const u32 cz_mgcg_cgcg_init[] = static const u32 stoney_mgcg_cgcg_init[] = { + mmATC_MISC_CG, 0xffffffff, 0x000c0200, mmMC_MEM_POWER_LS, 0xffffffff, 0x00000104 }; From e6b2a7d294360ecf128891d8288603526ce4d6ad Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 19 Oct 2016 13:06:14 -0400 Subject: [PATCH 083/792] drm/amdgpu: explicitly set pg_flags for ST No need to retain previous settings as this is the first time we set pg_flags. Probably a copy/paste typo from the CZ code. Avoids confusion. No change in behavior as adev is kzallocated. Reviewed-by: Tom St Denis Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/vi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/vi.c b/drivers/gpu/drm/amd/amdgpu/vi.c index c0d9aad7126f..7c13090df7c0 100644 --- a/drivers/gpu/drm/amd/amdgpu/vi.c +++ b/drivers/gpu/drm/amd/amdgpu/vi.c @@ -1651,7 +1651,7 @@ static int vi_common_early_init(void *handle) AMD_CG_SUPPORT_SDMA_MGCG | AMD_CG_SUPPORT_SDMA_LS | AMD_CG_SUPPORT_VCE_MGCG; - adev->pg_flags |= AMD_PG_SUPPORT_GFX_PG | + adev->pg_flags = AMD_PG_SUPPORT_GFX_PG | AMD_PG_SUPPORT_GFX_SMG | AMD_PG_SUPPORT_GFX_PIPELINE | AMD_PG_SUPPORT_UVD | From 57d7f9b64ad9d4d9c87ed1d6b58e5bfabf2dfc6c Mon Sep 17 00:00:00 2001 From: jimqu Date: Thu, 20 Oct 2016 14:58:04 +0800 Subject: [PATCH 084/792] drm/amdgpu: avoid drm error log during S3 on RHEL7.3 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: JimQu Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c index b0f6e6957536..82dc8d20e28a 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c @@ -519,7 +519,8 @@ static int amdgpu_cs_parser_bos(struct amdgpu_cs_parser *p, r = ttm_eu_reserve_buffers(&p->ticket, &p->validated, true, &duplicates); if (unlikely(r != 0)) { - DRM_ERROR("ttm_eu_reserve_buffers failed.\n"); + if (r != -ERESTARTSYS) + DRM_ERROR("ttm_eu_reserve_buffers failed.\n"); goto error_free_pages; } From 51585e03f5b26521d7840c06f4807ee62b23af3a Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Mon, 17 Oct 2016 18:15:26 +0800 Subject: [PATCH 085/792] drm/amd/powerplay: fix static checker warning in process_pptables_v1_0.c MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rex Zhu Reviewed-by: Christian König Signed-off-by: Alex Deucher --- .../gpu/drm/amd/powerplay/hwmgr/process_pptables_v1_0.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/process_pptables_v1_0.c b/drivers/gpu/drm/amd/powerplay/hwmgr/process_pptables_v1_0.c index 7de701d8a450..4477c55a58e3 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/process_pptables_v1_0.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/process_pptables_v1_0.c @@ -1201,12 +1201,15 @@ static uint32_t make_classification_flags(struct pp_hwmgr *hwmgr, static int ppt_get_num_of_vce_state_table_entries_v1_0(struct pp_hwmgr *hwmgr) { const ATOM_Tonga_POWERPLAYTABLE *pp_table = get_powerplay_table(hwmgr); - const ATOM_Tonga_VCE_State_Table *vce_state_table = - (ATOM_Tonga_VCE_State_Table *)(((unsigned long)pp_table) + le16_to_cpu(pp_table->usVCEStateTableOffset)); + const ATOM_Tonga_VCE_State_Table *vce_state_table; - if (vce_state_table == NULL) + + if (pp_table == NULL) return 0; + vce_state_table = (void *)pp_table + + le16_to_cpu(pp_table->usVCEStateTableOffset); + return vce_state_table->ucNumEntries; } From 8861a8209782faffedb6d64572fa968ee9c1c375 Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Thu, 20 Oct 2016 15:51:25 +0800 Subject: [PATCH 086/792] drm/amd/powerplay: don't give up if DPM is already running Currently the driver crashes if smu7_enable_dpm_tasks() returns early, which it does if DPM is already active. It seems to be better just to continue anyway, at least I haven't noticed any ill effects. It's also unclear at what state the hardware was left by the previous driver, so IMO it's better to always fully initialize. Way to reproduce: with GPU passthrough. forced power off the VM or forced reset the VM without shutting down the Os. Signed-off-by: Grazvydas Ignotas Reviewed-by: Edward O'Callaghan Reviewed-by: Rex Zhu Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c index 13333d01d2ef..75854021f403 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c @@ -1168,8 +1168,8 @@ int smu7_enable_dpm_tasks(struct pp_hwmgr *hwmgr) tmp_result = (!smum_is_dpm_running(hwmgr)) ? 0 : -1; PP_ASSERT_WITH_CODE(tmp_result == 0, - "DPM is already running right now, no need to enable DPM!", - return 0); + "DPM is already running", + ); if (smu7_voltage_control(hwmgr)) { tmp_result = smu7_enable_voltage_control(hwmgr); From 989cea5c14be024e879c0055dc6d033680a52610 Mon Sep 17 00:00:00 2001 From: Nicholas Piggin Date: Fri, 21 Oct 2016 01:13:33 +1100 Subject: [PATCH 087/792] kbuild: prevent lib-ksyms.o rebuilds Signed-off-by: Nicholas Piggin Reported-by: Russell King Tested-by: Russell King Signed-off-by: Michal Marek --- scripts/Makefile.build | 3 +++ 1 file changed, 3 insertions(+) diff --git a/scripts/Makefile.build b/scripts/Makefile.build index de46ab03f063..e1f25d6d132e 100644 --- a/scripts/Makefile.build +++ b/scripts/Makefile.build @@ -430,6 +430,9 @@ cmd_export_list = $(OBJDUMP) -h $< | \ $(obj)/lib-ksyms.o: $(lib-target) FORCE $(call if_changed,export_list) + +targets += $(obj)/lib-ksyms.o + endif # From b77428b12b55437b28deae738d9ce8b2e0663b55 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Mon, 24 Oct 2016 14:21:18 +1100 Subject: [PATCH 088/792] xfs: defer should abort intent items if the trans roll fails If the deferred ops transaction roll fails, we need to abort the intent items if we haven't already logged a done item for it, regardless of whether or not the deferred ops has had a transaction committed. Dave found this while running generic/388. Move the tracepoint to make it easier to track object lifetimes. Reported-by: Dave Chinner Signed-off-by: Darrick J. Wong Reviewed-by: Dave Chinner Signed-off-by: Dave Chinner --- fs/xfs/libxfs/xfs_defer.c | 17 +++++------------ 1 file changed, 5 insertions(+), 12 deletions(-) diff --git a/fs/xfs/libxfs/xfs_defer.c b/fs/xfs/libxfs/xfs_defer.c index 613c5cf19436..5c2929f94bd3 100644 --- a/fs/xfs/libxfs/xfs_defer.c +++ b/fs/xfs/libxfs/xfs_defer.c @@ -199,9 +199,9 @@ xfs_defer_intake_work( struct xfs_defer_pending *dfp; list_for_each_entry(dfp, &dop->dop_intake, dfp_list) { - trace_xfs_defer_intake_work(tp->t_mountp, dfp); dfp->dfp_intent = dfp->dfp_type->create_intent(tp, dfp->dfp_count); + trace_xfs_defer_intake_work(tp->t_mountp, dfp); list_sort(tp->t_mountp, &dfp->dfp_work, dfp->dfp_type->diff_items); list_for_each(li, &dfp->dfp_work) @@ -221,21 +221,14 @@ xfs_defer_trans_abort( struct xfs_defer_pending *dfp; trace_xfs_defer_trans_abort(tp->t_mountp, dop); - /* - * If the transaction was committed, drop the intent reference - * since we're bailing out of here. The other reference is - * dropped when the intent hits the AIL. If the transaction - * was not committed, the intent is freed by the intent item - * unlock handler on abort. - */ - if (!dop->dop_committed) - return; - /* Abort intent items. */ + /* Abort intent items that don't have a done item. */ list_for_each_entry(dfp, &dop->dop_pending, dfp_list) { trace_xfs_defer_pending_abort(tp->t_mountp, dfp); - if (!dfp->dfp_done) + if (dfp->dfp_intent && !dfp->dfp_done) { dfp->dfp_type->abort_intent(dfp->dfp_intent); + dfp->dfp_intent = NULL; + } } /* Shut down FS. */ From 38d8ed65092ed22f52a95f397855cace0260e110 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Sun, 23 Oct 2016 21:56:08 +0100 Subject: [PATCH 089/792] hwmon: (core) fix resource leak on devm_kcalloc failure If dev_kcalloc fails to allocate hw_dev->groups then the current exit path is a direct return, causing a leak of resources such as hwdev and ida is not removed. Fix this by exiting via the free_hwmon exit path that performs the necessary resource cleanup. Signed-off-by: Colin Ian King Signed-off-by: Guenter Roeck --- drivers/hwmon/hwmon.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c index adae6848ffb2..a74c075a30ec 100644 --- a/drivers/hwmon/hwmon.c +++ b/drivers/hwmon/hwmon.c @@ -536,8 +536,10 @@ __hwmon_device_register(struct device *dev, const char *name, void *drvdata, hwdev->groups = devm_kcalloc(dev, ngroups, sizeof(*groups), GFP_KERNEL); - if (!hwdev->groups) - return ERR_PTR(-ENOMEM); + if (!hwdev->groups) { + err = -ENOMEM; + goto free_hwmon; + } attrs = __hwmon_create_attrs(dev, drvdata, chip); if (IS_ERR(attrs)) { From f515c3834a4adf8b33f0e7215d434410b1687164 Mon Sep 17 00:00:00 2001 From: Bard Liao Date: Mon, 24 Oct 2016 18:32:18 +0800 Subject: [PATCH 090/792] ASoC: rt298: fix jack type detect error rt298_jack_detect may be called before card is instantiated. And snd_soc_dapm_force_enable_pin will not work in that case. So, update bit manually by regmap_update_bits. Signed-off-by: Bard Liao Signed-off-by: Mark Brown --- sound/soc/codecs/rt298.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/sound/soc/codecs/rt298.c b/sound/soc/codecs/rt298.c index 55558643166f..2db8179047ae 100644 --- a/sound/soc/codecs/rt298.c +++ b/sound/soc/codecs/rt298.c @@ -249,6 +249,11 @@ static int rt298_jack_detect(struct rt298_priv *rt298, bool *hp, bool *mic) snd_soc_dapm_force_enable_pin(dapm, "LDO1"); snd_soc_dapm_sync(dapm); + regmap_update_bits(rt298->regmap, + RT298_POWER_CTRL1, 0x1001, 0); + regmap_update_bits(rt298->regmap, + RT298_POWER_CTRL2, 0x4, 0x4); + regmap_write(rt298->regmap, RT298_SET_MIC1, 0x24); msleep(50); From 4690481060f3c6b557b01f18319c6382f0fd63ab Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sun, 23 Oct 2016 11:41:09 +0000 Subject: [PATCH 091/792] ASoC: Intel: Atom: add terminate entry for dmi_system_id tables Make sure dmi_system_id tables are NULL terminated. Signed-off-by: Wei Yongjun Signed-off-by: Mark Brown --- sound/soc/intel/atom/sst/sst_acpi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/intel/atom/sst/sst_acpi.c b/sound/soc/intel/atom/sst/sst_acpi.c index 4d3184971227..748a0f68fc6c 100644 --- a/sound/soc/intel/atom/sst/sst_acpi.c +++ b/sound/soc/intel/atom/sst/sst_acpi.c @@ -343,6 +343,7 @@ static const struct dmi_system_id cht_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Surface 3"), }, }, + { } }; From 86a6c211d676add579a75b7e172a72bb3e2c21f8 Mon Sep 17 00:00:00 2001 From: Benjamin Coddington Date: Wed, 15 Jun 2016 15:02:55 -0400 Subject: [PATCH 092/792] NFS: Trim extra slash in v4 nfs_path A NFSv4 mount of a subdirectory will show an extra slash (as in 'server://path') in proc's mountinfo which will not match the device name and path. This can cause problems for programs searching for the mount. Fix this by checking for a leading slash in the dentry path, if so trim away any trailing slashes in the device name. Signed-off-by: Benjamin Coddington Signed-off-by: Anna Schumaker --- fs/nfs/namespace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/namespace.c b/fs/nfs/namespace.c index c8162c660c44..5551e8ef67fd 100644 --- a/fs/nfs/namespace.c +++ b/fs/nfs/namespace.c @@ -98,7 +98,7 @@ rename_retry: return end; } namelen = strlen(base); - if (flags & NFS_PATH_CANONICAL) { + if (*end == '/') { /* Strip off excess slashes in base string */ while (namelen > 0 && base[namelen - 1] == '/') namelen--; From 0b34c261e235a5c74dcf78bd305845bd15fe2b42 Mon Sep 17 00:00:00 2001 From: Goldwyn Rodrigues Date: Fri, 30 Sep 2016 10:40:52 -0500 Subject: [PATCH 093/792] btrfs: qgroup: Prevent qgroup->reserved from going subzero While free'ing qgroup->reserved resources, we much check if the page has not been invalidated by a truncate operation by checking if the page is still dirty before reducing the qgroup resources. Resources in such a case are free'd when the entire extent is released by delayed_ref. This fixes a double accounting while releasing resources in case of truncating a file, reproduced by the following testcase. SCRATCH_DEV=/dev/vdb SCRATCH_MNT=/mnt mkfs.btrfs -f $SCRATCH_DEV mount -t btrfs $SCRATCH_DEV $SCRATCH_MNT cd $SCRATCH_MNT btrfs quota enable $SCRATCH_MNT btrfs subvolume create a btrfs qgroup limit 500m a $SCRATCH_MNT sync for c in {1..15}; do dd if=/dev/zero bs=1M count=40 of=$SCRATCH_MNT/a/file; done sleep 10 sync sleep 5 touch $SCRATCH_MNT/a/newfile echo "Removing file" rm $SCRATCH_MNT/a/file Fixes: b9d0b38928 ("btrfs: Add handler for invalidate page") Signed-off-by: Goldwyn Rodrigues Reviewed-by: Qu Wenruo Signed-off-by: David Sterba --- fs/btrfs/inode.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 50ba4ca167e7..6677674d0505 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -8930,9 +8930,14 @@ again: * So even we call qgroup_free_data(), it won't decrease reserved * space. * 2) Not written to disk - * This means the reserved space should be freed here. + * This means the reserved space should be freed here. However, + * if a truncate invalidates the page (by clearing PageDirty) + * and the page is accounted for while allocating extent + * in btrfs_check_data_free_space() we let delayed_ref to + * free the entire extent. */ - btrfs_qgroup_free_data(inode, page_start, PAGE_SIZE); + if (PageDirty(page)) + btrfs_qgroup_free_data(inode, page_start, PAGE_SIZE); if (!inode_evicting) { clear_extent_bit(tree, page_start, page_end, EXTENT_LOCKED | EXTENT_DIRTY | From 69ae5e4459e43e56f03d0987e865fbac2b05af2a Mon Sep 17 00:00:00 2001 From: Wang Xiaoguang Date: Thu, 13 Oct 2016 09:23:39 +0800 Subject: [PATCH 094/792] btrfs: make file clone aware of fatal signals Indeed this just make the behavior similar to xfs when process has fatal signals pending, and it'll make fstests/generic/298 happy. Signed-off-by: Wang Xiaoguang Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/ioctl.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index af69129d7e0e..71634570943c 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -3814,6 +3814,11 @@ process_slot: } btrfs_release_path(path); key.offset = next_key_min_offset; + + if (fatal_signal_pending(current)) { + ret = -EINTR; + goto out; + } } ret = 0; From dd4b857aabbce57518f2d32d9805365d3ff34fc6 Mon Sep 17 00:00:00 2001 From: Wang Xiaoguang Date: Tue, 18 Oct 2016 15:56:13 +0800 Subject: [PATCH 095/792] btrfs: pass correct args to btrfs_async_run_delayed_refs() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In btrfs_truncate_inode_items()->btrfs_async_run_delayed_refs(), we swap the arg2 and arg3 wrongly, fix this. This bug just impacts asynchronous delayed refs handle when we truncate inodes. In delayed_ref_async_start(), there is such codes: trans = btrfs_join_transaction(async->root); if (trans->transid > async->transid) goto end; ret = btrfs_run_delayed_refs(trans, async->root, async->count); From this codes, we can see that this just influence whether can we handle delayed refs or the number of delayed refs to handle, this may impact performance, but will not result in missing delayed refs, all delayed refs will be handled in btrfs_commit_transaction(). Signed-off-by: Wang Xiaoguang Reviewed-by: Holger Hoffstätte Signed-off-by: David Sterba --- fs/btrfs/inode.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 6677674d0505..1f980efbb2e8 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -4605,8 +4605,8 @@ delete: BUG_ON(ret); if (btrfs_should_throttle_delayed_refs(trans, root)) btrfs_async_run_delayed_refs(root, - trans->transid, - trans->delayed_ref_updates * 2, 0); + trans->delayed_ref_updates * 2, + trans->transid, 0); if (be_nice) { if (truncate_space_check(trans, root, extent_num_bytes)) { From 9c894696f56f5d84fb5766af81bcda4a7cb9a842 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 12 Oct 2016 11:33:21 +0300 Subject: [PATCH 096/792] Btrfs: remove some no-op casts We cast 0 to a u8 but then because of type promotion, it's immediately cast to int back to int before we do a bitwise negate. The cast doesn't matter in this case, the code works as intended. It causes a static checker warning though so let's remove it. Signed-off-by: Dan Carpenter Reviewed-by: David Sterba Signed-off-by: David Sterba --- fs/btrfs/extent_io.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 66a755150056..8ed05d95584a 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -5569,7 +5569,7 @@ void le_bitmap_set(u8 *map, unsigned int start, int len) *p |= mask_to_set; len -= bits_to_set; bits_to_set = BITS_PER_BYTE; - mask_to_set = ~(u8)0; + mask_to_set = ~0; p++; } if (len) { @@ -5589,7 +5589,7 @@ void le_bitmap_clear(u8 *map, unsigned int start, int len) *p &= ~mask_to_clear; len -= bits_to_clear; bits_to_clear = BITS_PER_BYTE; - mask_to_clear = ~(u8)0; + mask_to_clear = ~0; p++; } if (len) { @@ -5679,7 +5679,7 @@ void extent_buffer_bitmap_set(struct extent_buffer *eb, unsigned long start, kaddr[offset] |= mask_to_set; len -= bits_to_set; bits_to_set = BITS_PER_BYTE; - mask_to_set = ~(u8)0; + mask_to_set = ~0; if (++offset >= PAGE_SIZE && len > 0) { offset = 0; page = eb->pages[++i]; @@ -5721,7 +5721,7 @@ void extent_buffer_bitmap_clear(struct extent_buffer *eb, unsigned long start, kaddr[offset] &= ~mask_to_clear; len -= bits_to_clear; bits_to_clear = BITS_PER_BYTE; - mask_to_clear = ~(u8)0; + mask_to_clear = ~0; if (++offset >= PAGE_SIZE && len > 0) { offset = 0; page = eb->pages[++i]; From 9d1032cc49a8a1065e79ee323de66bcb4fdbd535 Mon Sep 17 00:00:00 2001 From: Wang Xiaoguang Date: Mon, 20 Jun 2016 09:18:52 +0800 Subject: [PATCH 097/792] btrfs: fix WARNING in btrfs_select_ref_head() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This issue was found when testing in-band dedupe enospc behaviour, sometimes run_one_delayed_ref() may fail for enospc reason, then __btrfs_run_delayed_refs（）will return, but forget to add num_heads_read back, which will trigger "WARN_ON(delayed_refs->num_heads_ready == 0)" in btrfs_select_ref_head(). Signed-off-by: Wang Xiaoguang Signed-off-by: David Sterba --- fs/btrfs/extent-tree.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 210c94ac8818..4607af38c72e 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -2647,7 +2647,10 @@ static noinline int __btrfs_run_delayed_refs(struct btrfs_trans_handle *trans, btrfs_free_delayed_extent_op(extent_op); if (ret) { + spin_lock(&delayed_refs->lock); locked_ref->processing = 0; + delayed_refs->num_heads_ready++; + spin_unlock(&delayed_refs->lock); btrfs_delayed_ref_unlock(locked_ref); btrfs_put_delayed_ref(ref); btrfs_debug(fs_info, "run_one_delayed_ref returned %d", From 6d13f62d931ba638e54ba56f3a7dd3080ffb485a Mon Sep 17 00:00:00 2001 From: Lukas Wunner Date: Thu, 20 Oct 2016 12:26:16 +0200 Subject: [PATCH 098/792] ASoC: Intel: Skylake: Always acquire runtime pm ref on unload skl_probe() releases a runtime pm ref unconditionally wheras skl_remove() acquires one only if the device is wakeup capable. Thus if the device is not wakeup capable, unloading and reloading the module will result in the refcount being decreased below 0. Fix it. Fixes: d8c2dab8381d ("ASoC: Intel: Add Skylake HDA audio driver") Signed-off-by: Lukas Wunner Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c index e3e764167765..7b7a380b1245 100644 --- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -785,8 +785,7 @@ static void skl_remove(struct pci_dev *pci) release_firmware(skl->tplg); - if (pci_dev_run_wake(pci)) - pm_runtime_get_noresume(&pci->dev); + pm_runtime_get_noresume(&pci->dev); /* codec removal, invoke bus_device_remove */ snd_hdac_ext_bus_device_remove(ebus); From 5229f1f4a4585f503a0683575bf38d9a1d2c1982 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 18 Oct 2016 17:18:58 +0200 Subject: [PATCH 099/792] ASoC: PXA: Brownstone needs I2C I rand into a new build error with SND_MMP_SOC_BROWNSTONE: warning: (SND_MMP_SOC_BROWNSTONE && SND_SOC_SAMSUNG_SMDK_WM8994 && SND_SOC_SMDK_WM8994_PCM && SND_SOC_LITTLEMILL) selects MFD_WM8994 which has unmet direct dependencies (HAS_IOMEM && I2C) drivers/mfd/wm8994-core.c:688:1: error: data definition has no type or storage class [-Werror] drivers/mfd/wm8994-core.c:688:1: error: type defaults to 'int' in declaration of 'module_i2c_driver' [-Werror=implicit-int] I don't see why this never showed up before, as the dependency seems to have been missing since the symbol was first introduced several years ago. This adds a dependency like the other drivers have. Signed-off-by: Arnd Bergmann Signed-off-by: Mark Brown --- sound/soc/pxa/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig index f2bf8661dd21..823b5a236d8d 100644 --- a/sound/soc/pxa/Kconfig +++ b/sound/soc/pxa/Kconfig @@ -208,7 +208,7 @@ config SND_PXA2XX_SOC_IMOTE2 config SND_MMP_SOC_BROWNSTONE tristate "SoC Audio support for Marvell Brownstone" - depends on SND_MMP_SOC && MACH_BROWNSTONE + depends on SND_MMP_SOC && MACH_BROWNSTONE && I2C select SND_MMP_SOC_SSPA select MFD_WM8994 select SND_SOC_WM8994 From 68a564006a21ae59c7c51b4359e2e8efa42ae4af Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 18 Oct 2016 00:05:35 +0200 Subject: [PATCH 100/792] NFSv4.1: work around -Wmaybe-uninitialized warning A bugfix introduced a harmless gcc warning in nfs4_slot_seqid_in_use if we enable -Wmaybe-uninitialized again: fs/nfs/nfs4session.c:203:54: error: 'cur_seq' may be used uninitialized in this function [-Werror=maybe-uninitialized] gcc is not smart enough to conclude that the IS_ERR/PTR_ERR pair results in a nonzero return value here. Using PTR_ERR_OR_ZERO() instead makes this clear to the compiler. The warning originally did not appear in v4.8 as it was globally disabled, but the bugfix that introduced the warning got backported to stable kernels which again enable it, and this is now the only warning in the v4.7 builds. Fixes: e09c978aae5b ("NFSv4.1: Fix Oopsable condition in server callback races") Signed-off-by: Arnd Bergmann Cc: Trond Myklebust Signed-off-by: Anna Schumaker --- fs/nfs/nfs4session.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/fs/nfs/nfs4session.c b/fs/nfs/nfs4session.c index b62973045a3e..150c5a1879bf 100644 --- a/fs/nfs/nfs4session.c +++ b/fs/nfs/nfs4session.c @@ -178,12 +178,14 @@ static int nfs4_slot_get_seqid(struct nfs4_slot_table *tbl, u32 slotid, __must_hold(&tbl->slot_tbl_lock) { struct nfs4_slot *slot; + int ret; slot = nfs4_lookup_slot(tbl, slotid); - if (IS_ERR(slot)) - return PTR_ERR(slot); - *seq_nr = slot->seq_nr; - return 0; + ret = PTR_ERR_OR_ZERO(slot); + if (!ret) + *seq_nr = slot->seq_nr; + + return ret; } /* From 0cc11a61b80a1ab1d12f1597b27b8b45ef8bac4a Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Thu, 20 Oct 2016 09:34:31 -0400 Subject: [PATCH 101/792] nfsd: move blocked lock handling under a dedicated spinlock Bruce was hitting some lockdep warnings in testing, showing that we could hit a deadlock with the new CB_NOTIFY_LOCK handling, involving a rather complex situation involving four different spinlocks. The crux of the matter is that we end up taking the nn->client_lock in the lm_notify handler. The simplest fix is to just declare a new per-nfsd_net spinlock to protect the new CB_NOTIFY_LOCK structures. Signed-off-by: Jeff Layton Signed-off-by: J. Bruce Fields --- fs/nfsd/netns.h | 5 +++++ fs/nfsd/nfs4state.c | 28 +++++++++++++++------------- 2 files changed, 20 insertions(+), 13 deletions(-) diff --git a/fs/nfsd/netns.h b/fs/nfsd/netns.h index b10d557f9c9e..ee36efd5aece 100644 --- a/fs/nfsd/netns.h +++ b/fs/nfsd/netns.h @@ -84,6 +84,8 @@ struct nfsd_net { struct list_head client_lru; struct list_head close_lru; struct list_head del_recall_lru; + + /* protected by blocked_locks_lock */ struct list_head blocked_locks_lru; struct delayed_work laundromat_work; @@ -91,6 +93,9 @@ struct nfsd_net { /* client_lock protects the client lru list and session hash table */ spinlock_t client_lock; + /* protects blocked_locks_lru */ + spinlock_t blocked_locks_lock; + struct file *rec_file; bool in_grace; const struct nfsd4_client_tracking_ops *client_tracking_ops; diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c index 9752beb78659..95474196a17e 100644 --- a/fs/nfsd/nfs4state.c +++ b/fs/nfsd/nfs4state.c @@ -217,7 +217,7 @@ find_blocked_lock(struct nfs4_lockowner *lo, struct knfsd_fh *fh, { struct nfsd4_blocked_lock *cur, *found = NULL; - spin_lock(&nn->client_lock); + spin_lock(&nn->blocked_locks_lock); list_for_each_entry(cur, &lo->lo_blocked, nbl_list) { if (fh_match(fh, &cur->nbl_fh)) { list_del_init(&cur->nbl_list); @@ -226,7 +226,7 @@ find_blocked_lock(struct nfs4_lockowner *lo, struct knfsd_fh *fh, break; } } - spin_unlock(&nn->client_lock); + spin_unlock(&nn->blocked_locks_lock); if (found) posix_unblock_lock(&found->nbl_lock); return found; @@ -4665,7 +4665,7 @@ nfs4_laundromat(struct nfsd_net *nn) * indefinitely once the lock does become free. */ BUG_ON(!list_empty(&reaplist)); - spin_lock(&nn->client_lock); + spin_lock(&nn->blocked_locks_lock); while (!list_empty(&nn->blocked_locks_lru)) { nbl = list_first_entry(&nn->blocked_locks_lru, struct nfsd4_blocked_lock, nbl_lru); @@ -4678,7 +4678,7 @@ nfs4_laundromat(struct nfsd_net *nn) list_move(&nbl->nbl_lru, &reaplist); list_del_init(&nbl->nbl_list); } - spin_unlock(&nn->client_lock); + spin_unlock(&nn->blocked_locks_lock); while (!list_empty(&reaplist)) { nbl = list_first_entry(&nn->blocked_locks_lru, @@ -5439,13 +5439,13 @@ nfsd4_lm_notify(struct file_lock *fl) bool queue = false; /* An empty list means that something else is going to be using it */ - spin_lock(&nn->client_lock); + spin_lock(&nn->blocked_locks_lock); if (!list_empty(&nbl->nbl_list)) { list_del_init(&nbl->nbl_list); list_del_init(&nbl->nbl_lru); queue = true; } - spin_unlock(&nn->client_lock); + spin_unlock(&nn->blocked_locks_lock); if (queue) nfsd4_run_cb(&nbl->nbl_cb); @@ -5868,10 +5868,10 @@ nfsd4_lock(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate, if (fl_flags & FL_SLEEP) { nbl->nbl_time = jiffies; - spin_lock(&nn->client_lock); + spin_lock(&nn->blocked_locks_lock); list_add_tail(&nbl->nbl_list, &lock_sop->lo_blocked); list_add_tail(&nbl->nbl_lru, &nn->blocked_locks_lru); - spin_unlock(&nn->client_lock); + spin_unlock(&nn->blocked_locks_lock); } err = vfs_lock_file(filp, F_SETLK, file_lock, conflock); @@ -5900,10 +5900,10 @@ out: if (nbl) { /* dequeue it if we queued it before */ if (fl_flags & FL_SLEEP) { - spin_lock(&nn->client_lock); + spin_lock(&nn->blocked_locks_lock); list_del_init(&nbl->nbl_list); list_del_init(&nbl->nbl_lru); - spin_unlock(&nn->client_lock); + spin_unlock(&nn->blocked_locks_lock); } free_blocked_lock(nbl); } @@ -6943,9 +6943,11 @@ static int nfs4_state_create_net(struct net *net) INIT_LIST_HEAD(&nn->client_lru); INIT_LIST_HEAD(&nn->close_lru); INIT_LIST_HEAD(&nn->del_recall_lru); - INIT_LIST_HEAD(&nn->blocked_locks_lru); spin_lock_init(&nn->client_lock); + spin_lock_init(&nn->blocked_locks_lock); + INIT_LIST_HEAD(&nn->blocked_locks_lru); + INIT_DELAYED_WORK(&nn->laundromat_work, laundromat_main); get_net(net); @@ -7063,14 +7065,14 @@ nfs4_state_shutdown_net(struct net *net) } BUG_ON(!list_empty(&reaplist)); - spin_lock(&nn->client_lock); + spin_lock(&nn->blocked_locks_lock); while (!list_empty(&nn->blocked_locks_lru)) { nbl = list_first_entry(&nn->blocked_locks_lru, struct nfsd4_blocked_lock, nbl_lru); list_move(&nbl->nbl_lru, &reaplist); list_del_init(&nbl->nbl_list); } - spin_unlock(&nn->client_lock); + spin_unlock(&nn->blocked_locks_lock); while (!list_empty(&reaplist)) { nbl = list_first_entry(&nn->blocked_locks_lru, From e8d7515a983b5ccf6681db0ade3714e837581a97 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 21 Oct 2016 16:16:07 -0400 Subject: [PATCH 102/792] drm/amdgpu: cancel reset work on fini MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Cancel any pending reset work when we tear down the driver. Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c index 278708f5a744..9fa809876339 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_irq.c @@ -239,6 +239,7 @@ int amdgpu_irq_init(struct amdgpu_device *adev) if (r) { adev->irq.installed = false; flush_work(&adev->hotplug_work); + cancel_work_sync(&adev->reset_work); return r; } @@ -264,6 +265,7 @@ void amdgpu_irq_fini(struct amdgpu_device *adev) if (adev->irq.msi_enabled) pci_disable_msi(adev->pdev); flush_work(&adev->hotplug_work); + cancel_work_sync(&adev->reset_work); } for (i = 0; i < AMDGPU_MAX_IRQ_SRC_ID; ++i) { From 4560738a8e9d5c0a053b8b896487b83e6948f4a1 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 21 Oct 2016 16:30:10 -0400 Subject: [PATCH 103/792] drm/amdgpu/dpm: flush any thermal work on fini MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Flush any outstanding thermal work before tearing down the dpm driver. Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/ci_dpm.c | 2 ++ drivers/gpu/drm/amd/amdgpu/kv_dpm.c | 2 ++ drivers/gpu/drm/amd/amdgpu/si_dpm.c | 2 ++ 3 files changed, 6 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/ci_dpm.c b/drivers/gpu/drm/amd/amdgpu/ci_dpm.c index 1d8c375a3561..29e6061b9087 100644 --- a/drivers/gpu/drm/amd/amdgpu/ci_dpm.c +++ b/drivers/gpu/drm/amd/amdgpu/ci_dpm.c @@ -6236,6 +6236,8 @@ static int ci_dpm_sw_fini(void *handle) { struct amdgpu_device *adev = (struct amdgpu_device *)handle; + flush_work(&adev->pm.dpm.thermal.work); + mutex_lock(&adev->pm.mutex); amdgpu_pm_sysfs_fini(adev); ci_dpm_fini(adev); diff --git a/drivers/gpu/drm/amd/amdgpu/kv_dpm.c b/drivers/gpu/drm/amd/amdgpu/kv_dpm.c index f8618a3881a8..71d2856222fa 100644 --- a/drivers/gpu/drm/amd/amdgpu/kv_dpm.c +++ b/drivers/gpu/drm/amd/amdgpu/kv_dpm.c @@ -3063,6 +3063,8 @@ static int kv_dpm_sw_fini(void *handle) { struct amdgpu_device *adev = (struct amdgpu_device *)handle; + flush_work(&adev->pm.dpm.thermal.work); + mutex_lock(&adev->pm.mutex); amdgpu_pm_sysfs_fini(adev); kv_dpm_fini(adev); diff --git a/drivers/gpu/drm/amd/amdgpu/si_dpm.c b/drivers/gpu/drm/amd/amdgpu/si_dpm.c index 3de7bca5854b..ee77e9cb55b1 100644 --- a/drivers/gpu/drm/amd/amdgpu/si_dpm.c +++ b/drivers/gpu/drm/amd/amdgpu/si_dpm.c @@ -7777,6 +7777,8 @@ static int si_dpm_sw_fini(void *handle) { struct amdgpu_device *adev = (struct amdgpu_device *)handle; + flush_work(&adev->pm.dpm.thermal.work); + mutex_lock(&adev->pm.mutex); amdgpu_pm_sysfs_fini(adev); si_dpm_fini(adev); From 9dc79965b21967caebde575f5f5d8bf1aa2c23ab Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michel=20D=C3=A4nzer?= Date: Mon, 24 Oct 2016 16:52:20 +0900 Subject: [PATCH 104/792] Revert "drm/radeon: fix DP link training issue with second 4K monitor" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit 1a738347df2ee4977459a8776fe2c62196bdcb1b. It caused at least some Kaveri laptops to incorrectly report DisplayPort connectors as connected. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97857 Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher Signed-off-by: Michel Dänzer Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_dp_auxch.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_dp_auxch.c b/drivers/gpu/drm/radeon/radeon_dp_auxch.c index 2d465648856a..474a8a1886f7 100644 --- a/drivers/gpu/drm/radeon/radeon_dp_auxch.c +++ b/drivers/gpu/drm/radeon/radeon_dp_auxch.c @@ -105,7 +105,7 @@ radeon_dp_aux_transfer_native(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg tmp &= AUX_HPD_SEL(0x7); tmp |= AUX_HPD_SEL(chan->rec.hpd); - tmp |= AUX_EN | AUX_LS_READ_EN | AUX_HPD_DISCON(0x1); + tmp |= AUX_EN | AUX_LS_READ_EN; WREG32(AUX_CONTROL + aux_offset[instance], tmp); From a053fb7e512c77f0742bceb578b10025256e1911 Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Sun, 23 Oct 2016 21:31:44 +0300 Subject: [PATCH 105/792] drm/amdgpu: fix sched fence slab teardown MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit To free fences, call_rcu() is used, which calls amd_sched_fence_free() after a grace period. During teardown, there is no guarantee all callbacks have finished, so sched_fence_slab may be destroyed before all fences have been freed. If we are lucky, this results in some slab warnings, if not, we get a crash in one of rcu threads because callback is called after amdgpu has already been unloaded. Fix it with a rcu_barrier(). Fixes: 189e0fb76304 ("drm/amdgpu: RCU protected amd_sched_fence_release") Acked-by: Chunming Zhou Reviewed-by: Christian König Signed-off-by: Grazvydas Ignotas Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/scheduler/gpu_scheduler.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/amd/scheduler/gpu_scheduler.c b/drivers/gpu/drm/amd/scheduler/gpu_scheduler.c index 963a24d46a93..910b8d5b21c5 100644 --- a/drivers/gpu/drm/amd/scheduler/gpu_scheduler.c +++ b/drivers/gpu/drm/amd/scheduler/gpu_scheduler.c @@ -645,6 +645,7 @@ void amd_sched_fini(struct amd_gpu_scheduler *sched) { if (sched->thread) kthread_stop(sched->thread); + rcu_barrier(); if (atomic_dec_and_test(&sched_fence_slab_ref)) kmem_cache_destroy(sched_fence_slab); } From 2d7c17be00e0dce3bc1a092a2c277a9f86c69ca9 Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Sun, 23 Oct 2016 21:31:45 +0300 Subject: [PATCH 106/792] drm/amdgpu: fix a vm_flush fence leak MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Looks like .last_flush reference is left at teardown. Leak reported by CONFIG_SLUB_DEBUG. Fixes: 41d9eb2c5a2a ("drm/amdgpu: add a fence after the VM flush") Reviewed-by: Chunming Zhou Reviewed-by: Christian König Signed-off-by: Grazvydas Ignotas Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c index 06f24322e7c3..968c4260d7a7 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c @@ -1758,5 +1758,6 @@ void amdgpu_vm_manager_fini(struct amdgpu_device *adev) fence_put(adev->vm_manager.ids[i].first); amdgpu_sync_free(&adev->vm_manager.ids[i].active); fence_put(id->flushed_updates); + fence_put(id->last_flush); } } From 9566213359aa75851a9ca7fea613652fb5fcb081 Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Sun, 23 Oct 2016 21:31:47 +0300 Subject: [PATCH 107/792] drm/amdgpu: update kernel-doc for some functions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The names were wrong. Reviewed-by: Edward O'Callaghan Reviewed-by: Christian König Signed-off-by: Grazvydas Ignotas Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/scheduler/sched_fence.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/scheduler/sched_fence.c b/drivers/gpu/drm/amd/scheduler/sched_fence.c index 6b63beaf7574..3653b5a40494 100644 --- a/drivers/gpu/drm/amd/scheduler/sched_fence.c +++ b/drivers/gpu/drm/amd/scheduler/sched_fence.c @@ -103,7 +103,7 @@ static void amd_sched_fence_free(struct rcu_head *rcu) } /** - * amd_sched_fence_release - callback that fence can be freed + * amd_sched_fence_release_scheduled - callback that fence can be freed * * @fence: fence * @@ -118,7 +118,7 @@ static void amd_sched_fence_release_scheduled(struct fence *f) } /** - * amd_sched_fence_release_scheduled - drop extra reference + * amd_sched_fence_release_finished - drop extra reference * * @f: fence * From 0f10425e811355986907c54f7d1d06703e406092 Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Sun, 23 Oct 2016 21:31:43 +0300 Subject: [PATCH 108/792] drm/amdgpu: fix fence slab teardown MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit To free fences, call_rcu() is used, which calls amdgpu_fence_free() after a grace period. During teardown, there is no guarantee all callbacks have finished, so amdgpu_fence_slab may be destroyed before all fences have been freed. If we are lucky, this results in some slab warnings, if not, we get a crash in one of rcu threads because callback is called after amdgpu has already been unloaded. Fix it with a rcu_barrier(). Fixes: b44135351a3a ("drm/amdgpu: RCU protected amdgpu_fence_release") Acked-by: Chunming Zhou Reviewed-by: Christian König Signed-off-by: Grazvydas Ignotas Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c index 3a2e42f4b897..77b34ec92632 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c @@ -68,6 +68,7 @@ int amdgpu_fence_slab_init(void) void amdgpu_fence_slab_fini(void) { + rcu_barrier(); kmem_cache_destroy(amdgpu_fence_slab); } /* From e3f948cd3283e4fbe5907f1f3967c839912f480e Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Thu, 6 Oct 2016 14:09:16 -0700 Subject: [PATCH 109/792] RAID1: ignore discard error If a write error occurs, raid1 will try to rewrite the bio in small chunk size. If the rewrite fails, raid1 will record the error in bad block. narrow_write_error will always use WRITE for the bio, but actually it could be a discard. Since discard bio hasn't payload, write the bio will cause different issues. But discard error isn't fatal, we can safely ignore it. This is what this patch does. This issue should exist since discard is added, but only exposed with recent arbitrary bio size feature. Reported-and-tested-by: Sitsofe Wheeler Cc: stable@vger.kernel.org (v3.6) Signed-off-by: Shaohua Li --- drivers/md/raid1.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 1961d827dbd1..db536a68b2ee 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -403,11 +403,14 @@ static void raid1_end_write_request(struct bio *bio) struct bio *to_put = NULL; int mirror = find_bio_disk(r1_bio, bio); struct md_rdev *rdev = conf->mirrors[mirror].rdev; + bool discard_error; + + discard_error = bio->bi_error && bio_op(bio) == REQ_OP_DISCARD; /* * 'one mirror IO has finished' event handler: */ - if (bio->bi_error) { + if (bio->bi_error && !discard_error) { set_bit(WriteErrorSeen, &rdev->flags); if (!test_and_set_bit(WantReplacement, &rdev->flags)) set_bit(MD_RECOVERY_NEEDED, & @@ -444,7 +447,7 @@ static void raid1_end_write_request(struct bio *bio) /* Maybe we can clear some bad blocks. */ if (is_badblock(rdev, r1_bio->sector, r1_bio->sectors, - &first_bad, &bad_sectors)) { + &first_bad, &bad_sectors) && !discard_error) { r1_bio->bios[mirror] = IO_MADE_GOOD; set_bit(R1BIO_MadeGood, &r1_bio->state); } From 579ed34f7b751b8add233cba4cf755258dbdd60a Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Thu, 6 Oct 2016 14:13:52 -0700 Subject: [PATCH 110/792] RAID10: ignore discard error This is the counterpart of raid10 fix. If a write error occurs, raid10 will try to rewrite the bio in small chunk size. If the rewrite fails, raid10 will record the error in bad block. narrow_write_error will always use WRITE for the bio, but actually it could be a discard. Since discard bio hasn't payload, write the bio will cause different issues. But discard error isn't fatal, we can safely ignore it. This is what this patch does. This issue should exist since discard is added, but only exposed with recent arbitrary bio size feature. Cc: Sitsofe Wheeler Cc: stable@vger.kernel.org (v3.6) Signed-off-by: Shaohua Li --- drivers/md/raid10.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index be1a9fca3b2d..39fddda2fef2 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -447,6 +447,9 @@ static void raid10_end_write_request(struct bio *bio) struct r10conf *conf = r10_bio->mddev->private; int slot, repl; struct md_rdev *rdev = NULL; + bool discard_error; + + discard_error = bio->bi_error && bio_op(bio) == REQ_OP_DISCARD; dev = find_bio_disk(conf, r10_bio, bio, &slot, &repl); @@ -460,7 +463,7 @@ static void raid10_end_write_request(struct bio *bio) /* * this branch is our 'one mirror IO has finished' event handler: */ - if (bio->bi_error) { + if (bio->bi_error && !discard_error) { if (repl) /* Never record new bad blocks to replacement, * just fail it. @@ -503,7 +506,7 @@ static void raid10_end_write_request(struct bio *bio) if (is_badblock(rdev, r10_bio->devs[slot].addr, r10_bio->sectors, - &first_bad, &bad_sectors)) { + &first_bad, &bad_sectors) && !discard_error) { bio_put(bio); if (repl) r10_bio->devs[slot].repl_bio = IO_MADE_GOOD; From 28cd88e2b4c54a466dcae7eea1efac766d42386b Mon Sep 17 00:00:00 2001 From: Zhengyuan Liu Date: Mon, 24 Oct 2016 09:55:20 +0800 Subject: [PATCH 111/792] md/raid5: initialize next_checkpoint field before use No initial operation was done to this field when we load/recovery the log, it got assignment only when IO to raid disk was finished. So r5l_quiesce may use wrong next_checkpoint to reclaim log space, that would make reclaimable space calculation confused. Signed-off-by: Zhengyuan Liu Signed-off-by: Shaohua Li --- drivers/md/raid5-cache.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/md/raid5-cache.c b/drivers/md/raid5-cache.c index 1b1ab4a1d132..998ea0025dd0 100644 --- a/drivers/md/raid5-cache.c +++ b/drivers/md/raid5-cache.c @@ -1096,6 +1096,8 @@ static int r5l_recovery_log(struct r5l_log *log) log->seq = ctx.seq + 11; log->log_start = r5l_ring_add(log, ctx.pos, BLOCK_SECTORS); r5l_write_super(log, ctx.pos); + log->last_checkpoint = ctx.pos; + log->next_checkpoint = ctx.pos; } else { log->log_start = ctx.pos; log->seq = ctx.seq; @@ -1168,6 +1170,7 @@ create: if (log->max_free_space > RECLAIM_MAX_FREE_SPACE) log->max_free_space = RECLAIM_MAX_FREE_SPACE; log->last_checkpoint = cp; + log->next_checkpoint = cp; __free_page(page); From 56056c2e7d58ee705755efbe780aefff987a1dc8 Mon Sep 17 00:00:00 2001 From: Zhengyuan Liu Date: Mon, 24 Oct 2016 16:15:59 +0800 Subject: [PATCH 112/792] md/raid5: write an empty meta-block when creating log super-block If superblock points to an invalid meta block, r5l_load_log will set create_super with true and create an new superblock, this runtime path would always happen if we do no writing I/O to this array since it was created. Writing an empty meta block could avoid this unnecessary action at the first time we created log superblock. Another reason is for the corretness of log recovery. Currently we have bellow code to guarantee log revocery to be correct. if (ctx.seq > log->last_cp_seq + 1) { int ret; ret = r5l_log_write_empty_meta_block(log, ctx.pos, ctx.seq + 10); if (ret) return ret; log->seq = ctx.seq + 11; log->log_start = r5l_ring_add(log, ctx.pos, BLOCK_SECTORS); r5l_write_super(log, ctx.pos); } else { log->log_start = ctx.pos; log->seq = ctx.seq; } If we just created a array with a journal device, log->log_start and log->last_checkpoint should all be 0, then we write three meta block which are valid except mid one and supposed crash happened. The ctx.seq would equal to log->last_cp_seq + 1 and log->log_start would be set to position of mid invalid meta block after we did a recovery, this will lead to problems which could be avoided with this patch. Signed-off-by: Zhengyuan Liu Signed-off-by: Shaohua Li --- drivers/md/raid5-cache.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/md/raid5-cache.c b/drivers/md/raid5-cache.c index 998ea0025dd0..981f85515191 100644 --- a/drivers/md/raid5-cache.c +++ b/drivers/md/raid5-cache.c @@ -1156,6 +1156,7 @@ create: if (create_super) { log->last_cp_seq = prandom_u32(); cp = 0; + r5l_log_write_empty_meta_block(log, cp, log->last_cp_seq); /* * Make sure super points to correct address. Log might have * data very soon. If super hasn't correct log tail address, From 16f889499a5214ebe038f8bd00f4c0094ed0ed75 Mon Sep 17 00:00:00 2001 From: Tomasz Majchrzak Date: Mon, 24 Oct 2016 12:47:28 +0200 Subject: [PATCH 113/792] md: report 'write_pending' state when array in sync If there is a bad block on a disk and there is a recovery performed from this disk, the same bad block is reported for a new disk. It involves setting MD_CHANGE_PENDING flag in rdev_set_badblocks. For external metadata this flag is not being cleared as array state is reported as 'clean'. The read request to bad block in RAID5 array gets stuck as it is waiting for a flag to be cleared - as per commit c3cce6cda162 ("md/raid5: ensure device failure recorded before write request returns."). The meaning of MD_CHANGE_PENDING and MD_CHANGE_CLEAN flags has been clarified in commit 070dc6dd7103 ("md: resolve confusion of MD_CHANGE_CLEAN"), however MD_CHANGE_PENDING flag has been used in personality error handlers since and it doesn't fully comply with initial purpose. It was supposed to notify that write request is about to start, however now it is also used to request metadata update. Initially (in md_allow_write, md_write_start) MD_CHANGE_PENDING flag has been set and in_sync has been set to 0 at the same time. Error handlers just set the flag without modifying in_sync value. Sysfs array state is a single value so now it reports 'clean' when MD_CHANGE_PENDING flag is set and in_sync is set to 1. Userspace has no idea it is expected to take some action. Swap the order that array state is checked so 'write_pending' is reported ahead of 'clean' ('write_pending' is a misleading name but it is too late to rename it now). Signed-off-by: Tomasz Majchrzak Signed-off-by: Shaohua Li --- drivers/md/md.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index eac84d8ff724..25b57a55db1a 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -3887,10 +3887,10 @@ array_state_show(struct mddev *mddev, char *page) st = read_auto; break; case 0: - if (mddev->in_sync) - st = clean; - else if (test_bit(MD_CHANGE_PENDING, &mddev->flags)) + if (test_bit(MD_CHANGE_PENDING, &mddev->flags)) st = write_pending; + else if (mddev->in_sync) + st = clean; else if (mddev->safemode) st = active_idle; else From 324ae0958cab5ccdf2851ef0348ba1cb8ad4e34a Mon Sep 17 00:00:00 2001 From: Dmitry Tunin Date: Mon, 24 Oct 2016 16:35:09 -0700 Subject: [PATCH 114/792] Input: psmouse - cleanup Focaltech code psmouse->name "Focaltech Touchpad" is an overkill. In xinput it is too long as "FocaltechPS/2 Focaltech Focaltech Touchpad" In focaltech_report_state() pointer to psmouse->dev is already stored as *dev Signed-off-by: Dmitry Tunin Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/focaltech.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/input/mouse/focaltech.c b/drivers/input/mouse/focaltech.c index 54eceb30ede5..a7d39689bbfb 100644 --- a/drivers/input/mouse/focaltech.c +++ b/drivers/input/mouse/focaltech.c @@ -43,7 +43,7 @@ int focaltech_detect(struct psmouse *psmouse, bool set_properties) if (set_properties) { psmouse->vendor = "FocalTech"; - psmouse->name = "FocalTech Touchpad"; + psmouse->name = "Touchpad"; } return 0; @@ -146,8 +146,8 @@ static void focaltech_report_state(struct psmouse *psmouse) } input_mt_report_pointer_emulation(dev, true); - input_report_key(psmouse->dev, BTN_LEFT, state->pressed); - input_sync(psmouse->dev); + input_report_key(dev, BTN_LEFT, state->pressed); + input_sync(dev); } static void focaltech_process_touch_packet(struct psmouse *psmouse, From 1e793f6fc0db920400574211c48f9157a37e3945 Mon Sep 17 00:00:00 2001 From: Kashyap Desai Date: Fri, 21 Oct 2016 06:33:32 -0700 Subject: [PATCH 115/792] scsi: megaraid_sas: Fix data integrity failure for JBOD (passthrough) devices Commit 02b01e010afe ("megaraid_sas: return sync cache call with success") modified the driver to successfully complete SYNCHRONIZE_CACHE commands without passing them to the controller. Disk drive caches are only explicitly managed by controller firmware when operating in RAID mode. So this commit effectively disabled writeback cache flushing for any drives used in JBOD mode, leading to data integrity failures. [mkp: clarified patch description] Fixes: 02b01e010afeeb49328d35650d70721d2ca3fd59 CC: stable@vger.kernel.org Signed-off-by: Kashyap Desai Signed-off-by: Sumit Saxena Reviewed-by: Tomas Henzl Reviewed-by: Hannes Reinecke Reviewed-by: Ewan D. Milne Signed-off-by: Martin K. Petersen --- drivers/scsi/megaraid/megaraid_sas_base.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c index 9ff57dee72d7..d8b1fbd4c8aa 100644 --- a/drivers/scsi/megaraid/megaraid_sas_base.c +++ b/drivers/scsi/megaraid/megaraid_sas_base.c @@ -1700,16 +1700,13 @@ megasas_queue_command(struct Scsi_Host *shost, struct scsi_cmnd *scmd) goto out_done; } - switch (scmd->cmnd[0]) { - case SYNCHRONIZE_CACHE: - /* - * FW takes care of flush cache on its own - * No need to send it down - */ + /* + * FW takes care of flush cache on its own for Virtual Disk. + * No need to send it down for VD. For JBOD send SYNCHRONIZE_CACHE to FW. + */ + if ((scmd->cmnd[0] == SYNCHRONIZE_CACHE) && MEGASAS_IS_LOGICAL(scmd)) { scmd->result = DID_OK << 16; goto out_done; - default: - break; } return instance->instancet->build_and_issue_cmd(instance, scmd); From 45c7a4908a307a023e237a64a3eadcafc4836493 Mon Sep 17 00:00:00 2001 From: Jaehoon Chung Date: Fri, 21 Oct 2016 19:57:57 +0900 Subject: [PATCH 116/792] mmc: dw_mmc-pltfm: fix the potential NULL pointer dereference platform_get_resource can be returned the NULL pointer. Then regs->start should be referred to NULL Pointer. devm_ioremap_resource() checks whether res is NULL or not. Signed-off-by: Jaehoon Chung Reviewed-by: Shawn Lin Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson --- drivers/mmc/host/dw_mmc-pltfm.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c index c0bb0c793e84..dbbc4303bdd0 100644 --- a/drivers/mmc/host/dw_mmc-pltfm.c +++ b/drivers/mmc/host/dw_mmc-pltfm.c @@ -46,12 +46,13 @@ int dw_mci_pltfm_register(struct platform_device *pdev, host->pdata = pdev->dev.platform_data; regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); - /* Get registers' physical base address */ - host->phy_regs = regs->start; host->regs = devm_ioremap_resource(&pdev->dev, regs); if (IS_ERR(host->regs)) return PTR_ERR(host->regs); + /* Get registers' physical base address */ + host->phy_regs = regs->start; + platform_set_drvdata(pdev, host); return dw_mci_probe(host); } From b7f865ede20c87073216f77fe97f6fc56666e3da Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Tue, 25 Oct 2016 01:08:31 +0800 Subject: [PATCH 117/792] ARM: dts: sun8i: fix the pinmux for UART1 When the patch is applied, the allwinner,driver and allwinner,pull properties are removed. Although they're described to be optional in the devicetree binding, without them, the pinmux cannot be initialized, and the uart cannot be used. Add them back to fix the problem, and makes the bluetooth on iNet D978 Rev2 board work. Fixes: 82eec384249f (ARM: dts: sun8i: add pinmux for UART1 at PG) Signed-off-by: Icenowy Zheng Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a23-a33.dtsi | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index 48fc24f36fcb..300a1bd5a6ec 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -282,11 +282,15 @@ uart1_pins_a: uart1@0 { allwinner,pins = "PG6", "PG7"; allwinner,function = "uart1"; + allwinner,drive = ; + allwinner,pull = ; }; uart1_pins_cts_rts_a: uart1-cts-rts@0 { allwinner,pins = "PG8", "PG9"; allwinner,function = "uart1"; + allwinner,drive = ; + allwinner,pull = ; }; mmc0_pins_a: mmc0@0 { From 34eee70a7b82b09dbda4cb453e0e21d460dae226 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 24 Oct 2016 17:22:01 +0200 Subject: [PATCH 118/792] staging: iio: ad5933: avoid uninitialized variable in error case The ad5933_i2c_read function returns an error code to indicate whether it could read data or not. However ad5933_work() ignores this return code and just accesses the data unconditionally, which gets detected by gcc as a possible bug: drivers/staging/iio/impedance-analyzer/ad5933.c: In function 'ad5933_work': drivers/staging/iio/impedance-analyzer/ad5933.c:649:16: warning: 'status' may be used uninitialized in this function [-Wmaybe-uninitialized] This adds minimal error handling so we only evaluate the data if it was correctly read. Link: https://patchwork.kernel.org/patch/8110281/ Signed-off-by: Arnd Bergmann Acked-by: Lars-Peter Clausen Cc: Signed-off-by: Jonathan Cameron --- drivers/staging/iio/impedance-analyzer/ad5933.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/staging/iio/impedance-analyzer/ad5933.c b/drivers/staging/iio/impedance-analyzer/ad5933.c index 5eecf1cb1028..3892a7470410 100644 --- a/drivers/staging/iio/impedance-analyzer/ad5933.c +++ b/drivers/staging/iio/impedance-analyzer/ad5933.c @@ -655,6 +655,7 @@ static void ad5933_work(struct work_struct *work) __be16 buf[2]; int val[2]; unsigned char status; + int ret; mutex_lock(&indio_dev->mlock); if (st->state == AD5933_CTRL_INIT_START_FREQ) { @@ -662,19 +663,22 @@ static void ad5933_work(struct work_struct *work) ad5933_cmd(st, AD5933_CTRL_START_SWEEP); st->state = AD5933_CTRL_START_SWEEP; schedule_delayed_work(&st->work, st->poll_time_jiffies); - mutex_unlock(&indio_dev->mlock); - return; + goto out; } - ad5933_i2c_read(st->client, AD5933_REG_STATUS, 1, &status); + ret = ad5933_i2c_read(st->client, AD5933_REG_STATUS, 1, &status); + if (ret) + goto out; if (status & AD5933_STAT_DATA_VALID) { int scan_count = bitmap_weight(indio_dev->active_scan_mask, indio_dev->masklength); - ad5933_i2c_read(st->client, + ret = ad5933_i2c_read(st->client, test_bit(1, indio_dev->active_scan_mask) ? AD5933_REG_REAL_DATA : AD5933_REG_IMAG_DATA, scan_count * 2, (u8 *)buf); + if (ret) + goto out; if (scan_count == 2) { val[0] = be16_to_cpu(buf[0]); @@ -686,8 +690,7 @@ static void ad5933_work(struct work_struct *work) } else { /* no data available - try again later */ schedule_delayed_work(&st->work, st->poll_time_jiffies); - mutex_unlock(&indio_dev->mlock); - return; + goto out; } if (status & AD5933_STAT_SWEEP_DONE) { @@ -700,7 +703,7 @@ static void ad5933_work(struct work_struct *work) ad5933_cmd(st, AD5933_CTRL_INC_FREQ); schedule_delayed_work(&st->work, st->poll_time_jiffies); } - +out: mutex_unlock(&indio_dev->mlock); } From ef6239e0cf5e665e7b20fd659678b98331b3081d Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 25 Oct 2016 09:37:37 -0400 Subject: [PATCH 119/792] drm/amdgpu/vce3: only enable 3 rings on new enough firmware (v2) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Older firmware versions don't support 3 rings. fixes: https://bugs.freedesktop.org/show_bug.cgi?id=98016 v2: use define for fw version Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/vce_v3_0.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c b/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c index 8533269ec160..6feed726e299 100644 --- a/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c +++ b/drivers/gpu/drm/amd/amdgpu/vce_v3_0.c @@ -52,6 +52,8 @@ #define VCE_V3_0_STACK_SIZE (64 * 1024) #define VCE_V3_0_DATA_SIZE ((16 * 1024 * AMDGPU_MAX_VCE_HANDLES) + (52 * 1024)) +#define FW_52_8_3 ((52 << 24) | (8 << 16) | (3 << 8)) + static void vce_v3_0_mc_resume(struct amdgpu_device *adev, int idx); static void vce_v3_0_set_ring_funcs(struct amdgpu_device *adev); static void vce_v3_0_set_irq_funcs(struct amdgpu_device *adev); @@ -382,6 +384,10 @@ static int vce_v3_0_sw_init(void *handle) if (r) return r; + /* 52.8.3 required for 3 ring support */ + if (adev->vce.fw_version < FW_52_8_3) + adev->vce.num_rings = 2; + r = amdgpu_vce_resume(adev); if (r) return r; From 537b4b462caa8bfb9726d9695b8e56e2d5e6b41e Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Mon, 24 Oct 2016 23:32:04 +0200 Subject: [PATCH 120/792] drm/radeon: drop register readback in cayman_cp_int_cntl_setup MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The read is taking a considerable amount of time (about 50us on this machine). The register does not ever hold anything other than the ring ID that is updated in this exact function, so there is no need for the read modify write cycle. This chops off a big chunk of the time spent in hardirq disabled context, as this function is called multiple times in the interrupt handler. With this change applied radeon won't show up in the list of the worst IRQ latency offenders anymore, where it was a regular before. Reviewed-by: Christian König Signed-off-by: Lucas Stach Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/ni.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c index 103fc8650197..a0d4a0522fdc 100644 --- a/drivers/gpu/drm/radeon/ni.c +++ b/drivers/gpu/drm/radeon/ni.c @@ -1396,9 +1396,7 @@ static void cayman_pcie_gart_fini(struct radeon_device *rdev) void cayman_cp_int_cntl_setup(struct radeon_device *rdev, int ring, u32 cp_int_cntl) { - u32 srbm_gfx_cntl = RREG32(SRBM_GFX_CNTL) & ~3; - - WREG32(SRBM_GFX_CNTL, srbm_gfx_cntl | (ring & 3)); + WREG32(SRBM_GFX_CNTL, RINGID(ring)); WREG32(CP_INT_CNTL, cp_int_cntl); } From cac5fcedaabdadf150c8a9be9fee76defc8ba444 Mon Sep 17 00:00:00 2001 From: Felix Monninger Date: Tue, 25 Oct 2016 22:28:08 +0100 Subject: [PATCH 121/792] drm: Release reference from blob lookup after replacing property MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit drm_property_lookup_blob() returns a reference to the returned blob, and drm_atomic_replace_property_blob() takes a references to the blob it stores, so afterwards we are left owning a reference to the new_blob that we never release, and thus leak memory every time we update a property such as during drm_atomic_helper_legacy_gamma_set(). v2: update credentials, drm_property_unreference_blob() is NULL safe and NULL is passed consistently to it throughout drm_atomic.c so do so here. Reported-by: Felix Monninger Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98420 Signed-off-by: Felix Monninger Signed-off-by: Chris Wilson Cc: stable@vger.kernel.org Fixes: 5488dc16fde7 ("drm: introduce pipe color correction properties") Reviewed-by: Ville Syrjälä Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/20161025212808.3908-1-chris@chris-wilson.co.uk --- drivers/gpu/drm/drm_atomic.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c index 23739609427d..e6862a744210 100644 --- a/drivers/gpu/drm/drm_atomic.c +++ b/drivers/gpu/drm/drm_atomic.c @@ -420,18 +420,21 @@ drm_atomic_replace_property_blob_from_id(struct drm_crtc *crtc, ssize_t expected_size, bool *replaced) { - struct drm_device *dev = crtc->dev; struct drm_property_blob *new_blob = NULL; if (blob_id != 0) { - new_blob = drm_property_lookup_blob(dev, blob_id); + new_blob = drm_property_lookup_blob(crtc->dev, blob_id); if (new_blob == NULL) return -EINVAL; - if (expected_size > 0 && expected_size != new_blob->length) + + if (expected_size > 0 && expected_size != new_blob->length) { + drm_property_unreference_blob(new_blob); return -EINVAL; + } } drm_atomic_replace_property_blob(blob, new_blob, replaced); + drm_property_unreference_blob(new_blob); return 0; } From 87d3b6588f9bf205902868d3e5baf68e37ad4ae1 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 20 Oct 2016 17:05:30 +0200 Subject: [PATCH 122/792] drm/fb-helper: Don't call dirty callback for untouched clips MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Since 4.7 kernel, we've seen the error messages like kernel: [TTM] Buffer eviction failed kernel: qxl 0000:00:02.0: object_init failed for (4026540032, 0x00000001) kernel: [drm:qxl_alloc_bo_reserved [qxl]] *ERROR* failed to allocate VRAM BO on QXL when switching and accessing on VT. The culprit was the generic deferred_io code (qxl driver switched to it since 4.7). There is a race between the dirty clip update and the call of callback. In drm_fb_helper_dirty(), the dirty clip is updated in the spinlock, while it kicks off the update worker outside the spinlock. Meanwhile the update worker clears the dirty clip in the spinlock, too. Thus, when drm_fb_helper_dirty() is called concurrently, schedule_work() is called after the clip is cleared in the first worker call. This patch addresses it by validating the clip before calling the dirty fb callback. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98322 Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1003298 Fixes: eaa434defaca ('drm/fb-helper: Add fb_deferred_io support') Cc: Signed-off-by: Takashi Iwai Reviewed-by: Ville Syrjälä Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/20161020150530.5787-1-tiwai@suse.de --- drivers/gpu/drm/drm_fb_helper.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index 03414bde1f15..aae7df01864d 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -644,7 +644,9 @@ static void drm_fb_helper_dirty_work(struct work_struct *work) clip->x2 = clip->y2 = 0; spin_unlock_irqrestore(&helper->dirty_lock, flags); - helper->fb->funcs->dirty(helper->fb, NULL, 0, 0, &clip_copy, 1); + /* call dirty callback only when it has been really touched */ + if (clip_copy.x1 < clip_copy.x2 && clip_copy.y1 < clip_copy.y2) + helper->fb->funcs->dirty(helper->fb, NULL, 0, 0, &clip_copy, 1); } /** From 1e6d304431958929b601b013687b73293ba27b88 Mon Sep 17 00:00:00 2001 From: Arnaud Pouliquen Date: Mon, 24 Oct 2016 16:42:52 +0200 Subject: [PATCH 123/792] ASoC: sti: fix channel status update after playback start If 'IEC958 Playback Default' control is updated during playback, Channel status needs to be set according to the runtime structure. Signed-off-by: Arnaud Pouliquen Signed-off-by: Mark Brown --- sound/soc/sti/uniperif_player.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/sound/soc/sti/uniperif_player.c b/sound/soc/sti/uniperif_player.c index 1bc8ebc2528e..ad54d4cf58ad 100644 --- a/sound/soc/sti/uniperif_player.c +++ b/sound/soc/sti/uniperif_player.c @@ -614,7 +614,11 @@ static int uni_player_ctl_iec958_put(struct snd_kcontrol *kcontrol, iec958->status[3] = ucontrol->value.iec958.status[3]; mutex_unlock(&player->ctrl_lock); - uni_player_set_channel_status(player, NULL); + if (player->substream && player->substream->runtime) + uni_player_set_channel_status(player, + player->substream->runtime); + else + uni_player_set_channel_status(player, NULL); return 0; } From 7e235deb69dc7b1c4b5e1ac63a3157ef98ceeff3 Mon Sep 17 00:00:00 2001 From: Arnaud Pouliquen Date: Mon, 24 Oct 2016 16:42:57 +0200 Subject: [PATCH 124/792] ASoC: sti-sas: enable fast io for regmap Some registers accesses are done in atomic context. Enable fast io to use spinlock instead of mutex to protect access. Signed-off-by: Arnaud Pouliquen Signed-off-by: Mark Brown --- sound/soc/codecs/sti-sas.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/sti-sas.c b/sound/soc/codecs/sti-sas.c index 7b31ee9b82bc..d6e00c77edcd 100644 --- a/sound/soc/codecs/sti-sas.c +++ b/sound/soc/codecs/sti-sas.c @@ -424,7 +424,7 @@ static const struct snd_soc_dai_ops stih407_dac_ops = { static const struct regmap_config stih407_sas_regmap = { .reg_bits = 32, .val_bits = 32, - + .fast_io = true, .max_register = STIH407_AUDIO_DAC_CTRL, .reg_defaults = stih407_sas_reg_defaults, .num_reg_defaults = ARRAY_SIZE(stih407_sas_reg_defaults), From 9078210ef4016539c909fb67164d3f1c27323d8b Mon Sep 17 00:00:00 2001 From: James Hogan Date: Tue, 25 Oct 2016 16:08:19 +0100 Subject: [PATCH 125/792] KVM: MIPS: Fix lazy user ASID regenerate for SMP MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit kvm_mips_check_asids() runs before entering the guest and performs lazy regeneration of host ASID for guest usermode, using last_user_gasid to track the last guest ASID in the VCPU that was used by guest usermode on any host CPU. last_user_gasid is reset after performing the lazy ASID regeneration on the current CPU, and by kvm_arch_vcpu_load() if the host ASID for guest usermode is regenerated due to staleness (to cancel outstanding lazy ASID regenerations). Unfortunately neither case handles SMP hosts correctly: - When the lazy ASID regeneration is performed it should apply to all CPUs (as last_user_gasid does), so reset the ASID on other CPUs to zero to trigger regeneration when the VCPU is next loaded on those CPUs. - When the ASID is found to be stale on the current CPU, we should not cancel lazy ASID regenerations globally, so drop the reset of last_user_gasid altogether here. Both cases would require a guest ASID change and two host CPU migrations (and in the latter case one of the CPUs to start a new ASID cycle) before guest usermode could potentially access stale user pages from a previously running ASID in the same VCPU. Fixes: 25b08c7fb0e4 ("KVM: MIPS: Invalidate TLB by regenerating ASIDs") Signed-off-by: James Hogan Cc: Paolo Bonzini Cc: "Radim Krčmář Cc: Ralf Baechle Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini --- arch/mips/kvm/mips.c | 5 ++++- arch/mips/kvm/mmu.c | 4 ---- 2 files changed, 4 insertions(+), 5 deletions(-) diff --git a/arch/mips/kvm/mips.c b/arch/mips/kvm/mips.c index 622037d851a3..06a60b19acfb 100644 --- a/arch/mips/kvm/mips.c +++ b/arch/mips/kvm/mips.c @@ -426,7 +426,7 @@ int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu, static void kvm_mips_check_asids(struct kvm_vcpu *vcpu) { struct mips_coproc *cop0 = vcpu->arch.cop0; - int cpu = smp_processor_id(); + int i, cpu = smp_processor_id(); unsigned int gasid; /* @@ -442,6 +442,9 @@ static void kvm_mips_check_asids(struct kvm_vcpu *vcpu) vcpu); vcpu->arch.guest_user_asid[cpu] = vcpu->arch.guest_user_mm.context.asid[cpu]; + for_each_possible_cpu(i) + if (i != cpu) + vcpu->arch.guest_user_asid[cpu] = 0; vcpu->arch.last_user_gasid = gasid; } } diff --git a/arch/mips/kvm/mmu.c b/arch/mips/kvm/mmu.c index 03883ba806e2..3b677c851be0 100644 --- a/arch/mips/kvm/mmu.c +++ b/arch/mips/kvm/mmu.c @@ -260,13 +260,9 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu) if ((vcpu->arch.guest_user_asid[cpu] ^ asid_cache(cpu)) & asid_version_mask(cpu)) { - u32 gasid = kvm_read_c0_guest_entryhi(vcpu->arch.cop0) & - KVM_ENTRYHI_ASID; - kvm_get_new_mmu_context(&vcpu->arch.guest_user_mm, cpu, vcpu); vcpu->arch.guest_user_asid[cpu] = vcpu->arch.guest_user_mm.context.asid[cpu]; - vcpu->arch.last_user_gasid = gasid; newasid++; kvm_debug("[%d]: cpu_context: %#lx\n", cpu, From ede5f3e7b54a4347be4d8525269eae50902bd7cd Mon Sep 17 00:00:00 2001 From: James Hogan Date: Tue, 25 Oct 2016 16:11:11 +0100 Subject: [PATCH 126/792] KVM: MIPS: Make ERET handle ERL before EXL MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The ERET instruction to return from exception is used for returning from exception level (Status.EXL) and error level (Status.ERL). If both bits are set however we should be returning from ERL first, as ERL can interrupt EXL, for example when an NMI is taken. KVM however checks EXL first. Fix the order of the checks to match the pseudocode in the instruction set manual. Fixes: e685c689f3a8 ("KVM/MIPS32: Privileged instruction/target branch emulation.") Signed-off-by: James Hogan Cc: Paolo Bonzini Cc: "Radim Krčmář Cc: Ralf Baechle Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Cc: # 3.10.x- Signed-off-by: Paolo Bonzini --- arch/mips/kvm/emulate.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/mips/kvm/emulate.c b/arch/mips/kvm/emulate.c index 8770f32c9e0b..c45ef0f13dfa 100644 --- a/arch/mips/kvm/emulate.c +++ b/arch/mips/kvm/emulate.c @@ -790,15 +790,15 @@ enum emulation_result kvm_mips_emul_eret(struct kvm_vcpu *vcpu) struct mips_coproc *cop0 = vcpu->arch.cop0; enum emulation_result er = EMULATE_DONE; - if (kvm_read_c0_guest_status(cop0) & ST0_EXL) { + if (kvm_read_c0_guest_status(cop0) & ST0_ERL) { + kvm_clear_c0_guest_status(cop0, ST0_ERL); + vcpu->arch.pc = kvm_read_c0_guest_errorepc(cop0); + } else if (kvm_read_c0_guest_status(cop0) & ST0_EXL) { kvm_debug("[%#lx] ERET to %#lx\n", vcpu->arch.pc, kvm_read_c0_guest_epc(cop0)); kvm_clear_c0_guest_status(cop0, ST0_EXL); vcpu->arch.pc = kvm_read_c0_guest_epc(cop0); - } else if (kvm_read_c0_guest_status(cop0) & ST0_ERL) { - kvm_clear_c0_guest_status(cop0, ST0_ERL); - vcpu->arch.pc = kvm_read_c0_guest_errorepc(cop0); } else { kvm_err("[%#lx] ERET when MIPS_SR_EXL|MIPS_SR_ERL == 0\n", vcpu->arch.pc); From e1e575f6b026734be3b1f075e780e91ab08ca541 Mon Sep 17 00:00:00 2001 From: James Hogan Date: Tue, 25 Oct 2016 16:11:12 +0100 Subject: [PATCH 127/792] KVM: MIPS: Precalculate MMIO load resume PC MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The advancing of the PC when completing an MMIO load is done before re-entering the guest, i.e. before restoring the guest ASID. However if the load is in a branch delay slot it may need to access guest code to read the prior branch instruction. This isn't safe in TLB mapped code at the moment, nor in the future when we'll access unmapped guest segments using direct user accessors too, as it could read the branch from host user memory instead. Therefore calculate the resume PC in advance while we're still in the right context and save it in the new vcpu->arch.io_pc (replacing the no longer needed vcpu->arch.pending_load_cause), and restore it on MMIO completion. Fixes: e685c689f3a8 ("KVM/MIPS32: Privileged instruction/target branch emulation.") Signed-off-by: James Hogan Cc: Paolo Bonzini Cc: "Radim Krčmář Cc: Ralf Baechle Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Cc: # 3.10.x- Signed-off-by: Paolo Bonzini --- arch/mips/include/asm/kvm_host.h | 7 ++++--- arch/mips/kvm/emulate.c | 24 +++++++++++++++--------- 2 files changed, 19 insertions(+), 12 deletions(-) diff --git a/arch/mips/include/asm/kvm_host.h b/arch/mips/include/asm/kvm_host.h index 07f58cfc1ab9..bebec370324f 100644 --- a/arch/mips/include/asm/kvm_host.h +++ b/arch/mips/include/asm/kvm_host.h @@ -293,7 +293,10 @@ struct kvm_vcpu_arch { /* Host KSEG0 address of the EI/DI offset */ void *kseg0_commpage; - u32 io_gpr; /* GPR used as IO source/target */ + /* Resume PC after MMIO completion */ + unsigned long io_pc; + /* GPR used as IO source/target */ + u32 io_gpr; struct hrtimer comparecount_timer; /* Count timer control KVM register */ @@ -315,8 +318,6 @@ struct kvm_vcpu_arch { /* Bitmask of pending exceptions to be cleared */ unsigned long pending_exceptions_clr; - u32 pending_load_cause; - /* Save/Restore the entryhi register when are are preempted/scheduled back in */ unsigned long preempt_entryhi; diff --git a/arch/mips/kvm/emulate.c b/arch/mips/kvm/emulate.c index c45ef0f13dfa..aa0937423e28 100644 --- a/arch/mips/kvm/emulate.c +++ b/arch/mips/kvm/emulate.c @@ -1528,13 +1528,25 @@ enum emulation_result kvm_mips_emulate_load(union mips_instruction inst, struct kvm_vcpu *vcpu) { enum emulation_result er = EMULATE_DO_MMIO; + unsigned long curr_pc; u32 op, rt; u32 bytes; rt = inst.i_format.rt; op = inst.i_format.opcode; - vcpu->arch.pending_load_cause = cause; + /* + * Find the resume PC now while we have safe and easy access to the + * prior branch instruction, and save it for + * kvm_mips_complete_mmio_load() to restore later. + */ + curr_pc = vcpu->arch.pc; + er = update_pc(vcpu, cause); + if (er == EMULATE_FAIL) + return er; + vcpu->arch.io_pc = vcpu->arch.pc; + vcpu->arch.pc = curr_pc; + vcpu->arch.io_gpr = rt; switch (op) { @@ -2494,9 +2506,8 @@ enum emulation_result kvm_mips_complete_mmio_load(struct kvm_vcpu *vcpu, goto done; } - er = update_pc(vcpu, vcpu->arch.pending_load_cause); - if (er == EMULATE_FAIL) - return er; + /* Restore saved resume PC */ + vcpu->arch.pc = vcpu->arch.io_pc; switch (run->mmio.len) { case 4: @@ -2518,11 +2529,6 @@ enum emulation_result kvm_mips_complete_mmio_load(struct kvm_vcpu *vcpu, break; } - if (vcpu->arch.pending_load_cause & CAUSEF_BD) - kvm_debug("[%#lx] Completing %d byte BD Load to gpr %d (0x%08lx) type %d\n", - vcpu->arch.pc, run->mmio.len, vcpu->arch.io_gpr, *gpr, - vcpu->mmio_needed); - done: return er; } From 45c7ee43a5184ddbff652ee0d2e826f86f1b616b Mon Sep 17 00:00:00 2001 From: Janosch Frank Date: Wed, 26 Oct 2016 08:48:11 +0200 Subject: [PATCH 128/792] KVM: s390: Fix STHYI buffer alignment for diag224 Diag224 requires a page-aligned 4k buffer to store the name table into. kmalloc does not guarantee page alignment, hence we replace it with __get_free_page for the buffer allocation. Cc: stable@vger.kernel.org # v4.8+ Reported-by: Michael Holzheu Signed-off-by: Janosch Frank Reviewed-by: Cornelia Huck Signed-off-by: Christian Borntraeger --- arch/s390/kvm/sthyi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/s390/kvm/sthyi.c b/arch/s390/kvm/sthyi.c index bd98b7d25200..05c98bb853cf 100644 --- a/arch/s390/kvm/sthyi.c +++ b/arch/s390/kvm/sthyi.c @@ -315,7 +315,7 @@ static void fill_diag(struct sthyi_sctns *sctns) if (r < 0) goto out; - diag224_buf = kmalloc(PAGE_SIZE, GFP_KERNEL | GFP_DMA); + diag224_buf = (void *)__get_free_page(GFP_KERNEL | GFP_DMA); if (!diag224_buf || diag224(diag224_buf)) goto out; @@ -378,7 +378,7 @@ static void fill_diag(struct sthyi_sctns *sctns) sctns->par.infpval1 |= PAR_WGHT_VLD; out: - kfree(diag224_buf); + free_page((unsigned long)diag224_buf); vfree(diag204_buf); } From 36343f6ea721e003ed11b48a6a05d77a255b3a62 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Wed, 26 Oct 2016 13:35:56 +0200 Subject: [PATCH 129/792] KVM: fix OOPS on flush_work The conversion done by commit 3706feacd007 ("KVM: Remove deprecated create_singlethread_workqueue") is broken. It flushes a single work item &irqfd->shutdown instead of all of them, and even worse if there is no irqfd on the list then you get a NULL pointer dereference. Revert the virt/kvm/eventfd.c part of that patch; to avoid the deprecated function, just allocate our own workqueue---it does not even have to be unbound---with alloc_workqueue. Fixes: 3706feacd007 Reviewed-by: Cornelia Huck Signed-off-by: Paolo Bonzini --- virt/kvm/eventfd.c | 22 +++++++++++++++++++--- virt/kvm/kvm_main.c | 6 ++++++ 2 files changed, 25 insertions(+), 3 deletions(-) diff --git a/virt/kvm/eventfd.c b/virt/kvm/eventfd.c index f397e9b20370..a29786dd9522 100644 --- a/virt/kvm/eventfd.c +++ b/virt/kvm/eventfd.c @@ -42,6 +42,7 @@ #ifdef CONFIG_HAVE_KVM_IRQFD +static struct workqueue_struct *irqfd_cleanup_wq; static void irqfd_inject(struct work_struct *work) @@ -167,7 +168,7 @@ irqfd_deactivate(struct kvm_kernel_irqfd *irqfd) list_del_init(&irqfd->list); - schedule_work(&irqfd->shutdown); + queue_work(irqfd_cleanup_wq, &irqfd->shutdown); } int __attribute__((weak)) kvm_arch_set_irq_inatomic( @@ -554,7 +555,7 @@ kvm_irqfd_deassign(struct kvm *kvm, struct kvm_irqfd *args) * so that we guarantee there will not be any more interrupts on this * gsi once this deassign function returns. */ - flush_work(&irqfd->shutdown); + flush_workqueue(irqfd_cleanup_wq); return 0; } @@ -591,7 +592,7 @@ kvm_irqfd_release(struct kvm *kvm) * Block until we know all outstanding shutdown jobs have completed * since we do not take a kvm* reference. */ - flush_work(&irqfd->shutdown); + flush_workqueue(irqfd_cleanup_wq); } @@ -621,8 +622,23 @@ void kvm_irq_routing_update(struct kvm *kvm) spin_unlock_irq(&kvm->irqfds.lock); } +/* + * create a host-wide workqueue for issuing deferred shutdown requests + * aggregated from all vm* instances. We need our own isolated + * queue to ease flushing work items when a VM exits. + */ +int kvm_irqfd_init(void) +{ + irqfd_cleanup_wq = alloc_workqueue("kvm-irqfd-cleanup", 0, 0); + if (!irqfd_cleanup_wq) + return -ENOMEM; + + return 0; +} + void kvm_irqfd_exit(void) { + destroy_workqueue(irqfd_cleanup_wq); } #endif diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index 28510e72618a..d92c3d5b0fbe 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -3846,7 +3846,12 @@ int kvm_init(void *opaque, unsigned vcpu_size, unsigned vcpu_align, * kvm_arch_init makes sure there's at most one caller * for architectures that support multiple implementations, * like intel and amd on x86. + * kvm_arch_init must be called before kvm_irqfd_init to avoid creating + * conflicts in case kvm is already setup for another implementation. */ + r = kvm_irqfd_init(); + if (r) + goto out_irqfd; if (!zalloc_cpumask_var(&cpus_hardware_enabled, GFP_KERNEL)) { r = -ENOMEM; @@ -3928,6 +3933,7 @@ out_free_0a: free_cpumask_var(cpus_hardware_enabled); out_free_0: kvm_irqfd_exit(); +out_irqfd: kvm_arch_exit(); out_fail: return r; From 7dfcb36a1f17e4c7c7c12b9d8a6902037c7d98dc Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Wed, 26 Oct 2016 12:05:52 +0300 Subject: [PATCH 130/792] drm/fb-helper: Fix connector ref leak on error MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We need to drop the connector references already taken when we abort in the middle of drm_fb_helper_single_add_all_connectors() Cc: stable@vger.kernel.org Cc: Carlos Santa Cc: Kirill A. Shutemov Tested-by: Carlos Santa Tested-by: Kirill A. Shutemov Signed-off-by: Ville Syrjälä Reviewed-by: Chris Wilson Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1477472755-15288-2-git-send-email-ville.syrjala@linux.intel.com --- drivers/gpu/drm/drm_fb_helper.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index aae7df01864d..efaccc2e1b4c 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -131,7 +131,12 @@ int drm_fb_helper_single_add_all_connectors(struct drm_fb_helper *fb_helper) return 0; fail: for (i = 0; i < fb_helper->connector_count; i++) { - kfree(fb_helper->connector_info[i]); + struct drm_fb_helper_connector *fb_helper_connector = + fb_helper->connector_info[i]; + + drm_connector_unreference(fb_helper_connector->connector); + + kfree(fb_helper_connector); fb_helper->connector_info[i] = NULL; } fb_helper->connector_count = 0; From 38d868e41c4b9250d5a115c049dc2d48f4909581 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Mon, 10 Oct 2016 17:50:56 +0300 Subject: [PATCH 131/792] drm: Don't force all planes to be added to the state due to zpos MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We don't want all planes to be added to the state whenever a plane with fixed zpos gets enabled/disabled. This is true especially for eg. cursor planes on i915, as we want cursor updates to go through w/o throttling. Same holds for drivers that don't support zpos at all (i915 actually falls into this category right now since we've not yet added zpos support). Allow drivers more freedom by letting them deal with zpos themselves instead of doing it in drm_atomic_helper_check_planes() unconditionally. Let's just inline the required calls into all the driver that currently depend on this. v2: Inline the stuff into the drivers instead of adding another helper, document things better (Daniel) Cc: Daniel Vetter Cc: Marek Szyprowski Cc: Benjamin Gaignard Cc: Vincent Abriou Cc: Laurent Pinchart Cc: Inki Dae Cc: Joonyoung Shim Cc: Seung-Woo Kim Cc: Kyungmin Park Cc: Lyude Cc: Maarten Lankhorst Cc: stable@vger.kernel.org Fixes: 44d1240d006c ("drm: add generic zpos property") Signed-off-by: Ville Syrjälä Reviewed-by: Sean Paul Acked-by: Benjamin Gaignard Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1476111056-12734-1-git-send-email-ville.syrjala@linux.intel.com --- drivers/gpu/drm/drm_atomic_helper.c | 4 ---- drivers/gpu/drm/exynos/exynos_drm_drv.c | 20 ++++++++++++++++++++ drivers/gpu/drm/exynos/exynos_drm_drv.h | 1 + drivers/gpu/drm/exynos/exynos_drm_fb.c | 2 +- drivers/gpu/drm/rcar-du/rcar_du_kms.c | 12 ++++++++++-- drivers/gpu/drm/sti/sti_drv.c | 22 +++++++++++++++++++++- include/drm/drm_plane.h | 8 +++++++- 7 files changed, 60 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c index c3f83476f996..21f992605541 100644 --- a/drivers/gpu/drm/drm_atomic_helper.c +++ b/drivers/gpu/drm/drm_atomic_helper.c @@ -594,10 +594,6 @@ drm_atomic_helper_check_planes(struct drm_device *dev, struct drm_plane_state *plane_state; int i, ret = 0; - ret = drm_atomic_normalize_zpos(dev, state); - if (ret) - return ret; - for_each_plane_in_state(state, plane, plane_state, i) { const struct drm_plane_helper_funcs *funcs; diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c b/drivers/gpu/drm/exynos/exynos_drm_drv.c index def78c8c1780..f86e7c846678 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_drv.c +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c @@ -262,6 +262,26 @@ int exynos_atomic_commit(struct drm_device *dev, struct drm_atomic_state *state, return 0; } +int exynos_atomic_check(struct drm_device *dev, + struct drm_atomic_state *state) +{ + int ret; + + ret = drm_atomic_helper_check_modeset(dev, state); + if (ret) + return ret; + + ret = drm_atomic_normalize_zpos(dev, state); + if (ret) + return ret; + + ret = drm_atomic_helper_check_planes(dev, state); + if (ret) + return ret; + + return ret; +} + static int exynos_drm_open(struct drm_device *dev, struct drm_file *file) { struct drm_exynos_file_private *file_priv; diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h b/drivers/gpu/drm/exynos/exynos_drm_drv.h index d215149e737b..80c4d5b81689 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_drv.h +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h @@ -301,6 +301,7 @@ static inline int exynos_dpi_bind(struct drm_device *dev, int exynos_atomic_commit(struct drm_device *dev, struct drm_atomic_state *state, bool nonblock); +int exynos_atomic_check(struct drm_device *dev, struct drm_atomic_state *state); extern struct platform_driver fimd_driver; diff --git a/drivers/gpu/drm/exynos/exynos_drm_fb.c b/drivers/gpu/drm/exynos/exynos_drm_fb.c index 40ce841eb952..23cce0a3f5fc 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fb.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fb.c @@ -190,7 +190,7 @@ dma_addr_t exynos_drm_fb_dma_addr(struct drm_framebuffer *fb, int index) static const struct drm_mode_config_funcs exynos_drm_mode_config_funcs = { .fb_create = exynos_user_fb_create, .output_poll_changed = exynos_drm_output_poll_changed, - .atomic_check = drm_atomic_helper_check, + .atomic_check = exynos_atomic_check, .atomic_commit = exynos_atomic_commit, }; diff --git a/drivers/gpu/drm/rcar-du/rcar_du_kms.c b/drivers/gpu/drm/rcar-du/rcar_du_kms.c index bd9c3bb9252c..392c7e6de042 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_kms.c +++ b/drivers/gpu/drm/rcar-du/rcar_du_kms.c @@ -231,8 +231,16 @@ static int rcar_du_atomic_check(struct drm_device *dev, struct rcar_du_device *rcdu = dev->dev_private; int ret; - ret = drm_atomic_helper_check(dev, state); - if (ret < 0) + ret = drm_atomic_helper_check_modeset(dev, state); + if (ret) + return ret; + + ret = drm_atomic_normalize_zpos(dev, state); + if (ret) + return ret; + + ret = drm_atomic_helper_check_planes(dev, state); + if (ret) return ret; if (rcar_du_has(rcdu, RCAR_DU_FEATURE_VSP1_SOURCE)) diff --git a/drivers/gpu/drm/sti/sti_drv.c b/drivers/gpu/drm/sti/sti_drv.c index 2784919a7366..9df308565f6c 100644 --- a/drivers/gpu/drm/sti/sti_drv.c +++ b/drivers/gpu/drm/sti/sti_drv.c @@ -195,6 +195,26 @@ static void sti_atomic_work(struct work_struct *work) sti_atomic_complete(private, private->commit.state); } +static int sti_atomic_check(struct drm_device *dev, + struct drm_atomic_state *state) +{ + int ret; + + ret = drm_atomic_helper_check_modeset(dev, state); + if (ret) + return ret; + + ret = drm_atomic_normalize_zpos(dev, state); + if (ret) + return ret; + + ret = drm_atomic_helper_check_planes(dev, state); + if (ret) + return ret; + + return ret; +} + static int sti_atomic_commit(struct drm_device *drm, struct drm_atomic_state *state, bool nonblock) { @@ -248,7 +268,7 @@ static void sti_output_poll_changed(struct drm_device *ddev) static const struct drm_mode_config_funcs sti_mode_config_funcs = { .fb_create = drm_fb_cma_create, .output_poll_changed = sti_output_poll_changed, - .atomic_check = drm_atomic_helper_check, + .atomic_check = sti_atomic_check, .atomic_commit = sti_atomic_commit, }; diff --git a/include/drm/drm_plane.h b/include/drm/drm_plane.h index 43cf193e54d6..8b4dc62470ff 100644 --- a/include/drm/drm_plane.h +++ b/include/drm/drm_plane.h @@ -47,8 +47,14 @@ struct drm_crtc; * @src_h: height of visible portion of plane (in 16.16) * @rotation: rotation of the plane * @zpos: priority of the given plane on crtc (optional) + * Note that multiple active planes on the same crtc can have an identical + * zpos value. The rule to solving the conflict is to compare the plane + * object IDs; the plane with a higher ID must be stacked on top of a + * plane with a lower ID. * @normalized_zpos: normalized value of zpos: unique, range from 0 to N-1 - * where N is the number of active planes for given crtc + * where N is the number of active planes for given crtc. Note that + * the driver must call drm_atomic_normalize_zpos() to update this before + * it can be trusted. * @src: clipped source coordinates of the plane (in 16.16) * @dst: clipped destination coordinates of the plane * @visible: visibility of the plane From a2889606636d135148de101fe3311dfea67baf1c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Wed, 26 Oct 2016 17:41:18 +0300 Subject: [PATCH 132/792] drm/fb-helper: Keep references for the current set of used connectors MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The fbdev helper code keeps around two lists of connectors. One is the list of all connectors it could use, and that list already holds references for all the connectors. However the other list, or rather lists, is the one actively being used. That list is tracked per-crtc and currently doesn't hold any extra references. Let's grab those extra references to avoid oopsing when the connector vanishes. The list of all possible connectors should get updated when the hpd happens, but the list of actively used connectors would not get updated until the next time the fb-helper picks through the set of possible connectors. And so we need to hang on to the connectors until that time. Since we need to clean up in drm_fb_helper_crtc_free() as well, let's pull the code to a common place. And while at it let's pull in up the modeset->mode cleanup in there as well. The case of modeset->fb is a bit less clear. I'm thinking we should probably hold a reference to it, but for now I just slapped on a FIXME. v2: Cleanup things drm_fb_helper_crtc_free() too (Chris) v3: Don't leak modeset->connectors (Chris) Cc: Chris Wilson Cc: stable@vger.kernel.org Cc: Carlos Santa Cc: Kirill A. Shutemov Tested-by: Carlos Santa (v1) Tested-by: Kirill A. Shutemov (v1) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97666 Signed-off-by: Ville Syrjälä Reviewed-by: Chris Wilson Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1477492878-4990-1-git-send-email-ville.syrjala@linux.intel.com --- drivers/gpu/drm/drm_fb_helper.c | 57 +++++++++++++++++++-------------- 1 file changed, 33 insertions(+), 24 deletions(-) diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index efaccc2e1b4c..6c75e62c0b22 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -608,6 +608,24 @@ int drm_fb_helper_blank(int blank, struct fb_info *info) } EXPORT_SYMBOL(drm_fb_helper_blank); +static void drm_fb_helper_modeset_release(struct drm_fb_helper *helper, + struct drm_mode_set *modeset) +{ + int i; + + for (i = 0; i < modeset->num_connectors; i++) { + drm_connector_unreference(modeset->connectors[i]); + modeset->connectors[i] = NULL; + } + modeset->num_connectors = 0; + + drm_mode_destroy(helper->dev, modeset->mode); + modeset->mode = NULL; + + /* FIXME should hold a ref? */ + modeset->fb = NULL; +} + static void drm_fb_helper_crtc_free(struct drm_fb_helper *helper) { int i; @@ -617,10 +635,12 @@ static void drm_fb_helper_crtc_free(struct drm_fb_helper *helper) kfree(helper->connector_info[i]); } kfree(helper->connector_info); + for (i = 0; i < helper->crtc_count; i++) { - kfree(helper->crtc_info[i].mode_set.connectors); - if (helper->crtc_info[i].mode_set.mode) - drm_mode_destroy(helper->dev, helper->crtc_info[i].mode_set.mode); + struct drm_mode_set *modeset = &helper->crtc_info[i].mode_set; + + drm_fb_helper_modeset_release(helper, modeset); + kfree(modeset->connectors); } kfree(helper->crtc_info); } @@ -2095,7 +2115,6 @@ static void drm_setup_crtcs(struct drm_fb_helper *fb_helper) struct drm_fb_helper_crtc **crtcs; struct drm_display_mode **modes; struct drm_fb_offset *offsets; - struct drm_mode_set *modeset; bool *enabled; int width, height; int i; @@ -2143,45 +2162,35 @@ static void drm_setup_crtcs(struct drm_fb_helper *fb_helper) /* need to set the modesets up here for use later */ /* fill out the connector<->crtc mappings into the modesets */ - for (i = 0; i < fb_helper->crtc_count; i++) { - modeset = &fb_helper->crtc_info[i].mode_set; - modeset->num_connectors = 0; - modeset->fb = NULL; - } + for (i = 0; i < fb_helper->crtc_count; i++) + drm_fb_helper_modeset_release(fb_helper, + &fb_helper->crtc_info[i].mode_set); for (i = 0; i < fb_helper->connector_count; i++) { struct drm_display_mode *mode = modes[i]; struct drm_fb_helper_crtc *fb_crtc = crtcs[i]; struct drm_fb_offset *offset = &offsets[i]; - modeset = &fb_crtc->mode_set; + struct drm_mode_set *modeset = &fb_crtc->mode_set; if (mode && fb_crtc) { + struct drm_connector *connector = + fb_helper->connector_info[i]->connector; + DRM_DEBUG_KMS("desired mode %s set on crtc %d (%d,%d)\n", mode->name, fb_crtc->mode_set.crtc->base.id, offset->x, offset->y); + fb_crtc->desired_mode = mode; fb_crtc->x = offset->x; fb_crtc->y = offset->y; - if (modeset->mode) - drm_mode_destroy(dev, modeset->mode); modeset->mode = drm_mode_duplicate(dev, fb_crtc->desired_mode); - modeset->connectors[modeset->num_connectors++] = fb_helper->connector_info[i]->connector; + drm_connector_reference(connector); + modeset->connectors[modeset->num_connectors++] = connector; modeset->fb = fb_helper->fb; modeset->x = offset->x; modeset->y = offset->y; } } - - /* Clear out any old modes if there are no more connected outputs. */ - for (i = 0; i < fb_helper->crtc_count; i++) { - modeset = &fb_helper->crtc_info[i].mode_set; - if (modeset->num_connectors == 0) { - BUG_ON(modeset->fb); - if (modeset->mode) - drm_mode_destroy(dev, modeset->mode); - modeset->mode = NULL; - } - } out: kfree(crtcs); kfree(modes); From 36e3fa6a38e135e9478a2f75dec9bf6ff1e6480e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Wed, 26 Oct 2016 16:30:33 +0300 Subject: [PATCH 133/792] drm/dp/mst: Clear port->pdt when tearing down the i2c adapter MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The i2c adapter is only relevant for some peer device types, so let's clear the pdt if it's still the same as the old_pdt when we tear down the i2c adapter. I don't really like this design pattern of updating port->whatever before doing the accompanying changes and passing around old_whatever to figure stuff out. Would make much more sense to me to the pass the new value around and only update the port->whatever when things are consistent. But let's try to work with what we have right now. Quoting a follow-up from Ville: "And naturally I forgot to amend the commit message w.r.t. this guy [the change in drm_dp_destroy_port]. We don't really need to do this here, but I figured I'd try to be a bit more consistent by having it, just to avoid accidental mistakes if/when someone changes this stuff again later." v2: Clear port->pdt in the caller, if needed (Daniel) Cc: Daniel Vetter Cc: stable@vger.kernel.org Cc: Carlos Santa Cc: Kirill A. Shutemov Tested-by: Carlos Santa (v1) Tested-by: Kirill A. Shutemov (v1) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97666 Signed-off-by: Ville Syrjälä Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1477488633-16544-1-git-send-email-ville.syrjala@linux.intel.com --- drivers/gpu/drm/drm_dp_mst_topology.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c index 04e457117980..ba13f9d8720b 100644 --- a/drivers/gpu/drm/drm_dp_mst_topology.c +++ b/drivers/gpu/drm/drm_dp_mst_topology.c @@ -914,6 +914,7 @@ static void drm_dp_destroy_port(struct kref *kref) /* no need to clean up vcpi * as if we have no connector we never setup a vcpi */ drm_dp_port_teardown_pdt(port, port->pdt); + port->pdt = DP_PEER_DEVICE_NONE; } kfree(port); } @@ -2919,6 +2920,7 @@ static void drm_dp_destroy_connector_work(struct work_struct *work) mgr->cbs->destroy_connector(mgr, port->connector); drm_dp_port_teardown_pdt(port, port->pdt); + port->pdt = DP_PEER_DEVICE_NONE; if (!port->input && port->vcpi.vcpi > 0) { drm_dp_mst_reset_vcpi_slots(mgr, port); From 4da5caa6a6f82cda3193bca855235b87debf78bd Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Wed, 26 Oct 2016 12:05:55 +0300 Subject: [PATCH 134/792] drm/dp/mst: Check peer device type before attempting EDID read MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Only certain types of pdts have the DDC bus registered, so check for that before we attempt the EDID read. Othwewise we risk playing around with an i2c adapter that doesn't actually exist. Cc: stable@vger.kernel.org Cc: Carlos Santa Cc: Kirill A. Shutemov Tested-by: Carlos Santa Tested-by: Kirill A. Shutemov Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97666 Signed-off-by: Ville Syrjälä Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/1477472755-15288-5-git-send-email-ville.syrjala@linux.intel.com --- drivers/gpu/drm/drm_dp_mst_topology.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c index ba13f9d8720b..aa644487749c 100644 --- a/drivers/gpu/drm/drm_dp_mst_topology.c +++ b/drivers/gpu/drm/drm_dp_mst_topology.c @@ -1160,7 +1160,9 @@ static void drm_dp_add_port(struct drm_dp_mst_branch *mstb, drm_dp_put_port(port); goto out; } - if (port->port_num >= DP_MST_LOGICAL_PORT_0) { + if ((port->pdt == DP_PEER_DEVICE_DP_LEGACY_CONV || + port->pdt == DP_PEER_DEVICE_SST_SINK) && + port->port_num >= DP_MST_LOGICAL_PORT_0) { port->cached_edid = drm_get_edid(port->connector, &port->aux.ddc); drm_mode_connector_set_tile_property(port->connector); } From 49a5d73fd03528289c315d345e4917a1ba2b48e7 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Fri, 21 Oct 2016 16:55:02 +0800 Subject: [PATCH 135/792] drm/amdgpu: fix s3 resume back, uvd dpm randomly can't disable. the value of last_mclk_dpm_enable_mask will be changed if other clients(vce,dal) trigger set power state between enable and disable uvd dpm. Signed-off-by: Rex Zhu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/ci_dpm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/ci_dpm.c b/drivers/gpu/drm/amd/amdgpu/ci_dpm.c index 29e6061b9087..5be788b269e2 100644 --- a/drivers/gpu/drm/amd/amdgpu/ci_dpm.c +++ b/drivers/gpu/drm/amd/amdgpu/ci_dpm.c @@ -4075,7 +4075,7 @@ static int ci_enable_uvd_dpm(struct amdgpu_device *adev, bool enable) pi->dpm_level_enable_mask.mclk_dpm_enable_mask); } } else { - if (pi->last_mclk_dpm_enable_mask & 0x1) { + if (pi->uvd_enabled) { pi->uvd_enabled = false; pi->dpm_level_enable_mask.mclk_dpm_enable_mask |= 1; amdgpu_ci_send_msg_to_smc_with_parameter(adev, From 7dc86ef5ac91642dfc3eb93ee0f0458e702a343e Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 14 Oct 2016 16:38:02 -0400 Subject: [PATCH 136/792] drm/radeon/si_dpm: workaround for SI kickers Consolidate existing quirks. Fixes stability issues on some kickers. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/si_dpm.c | 59 ++++++++++++++++++++++++--------- 1 file changed, 43 insertions(+), 16 deletions(-) diff --git a/drivers/gpu/drm/radeon/si_dpm.c b/drivers/gpu/drm/radeon/si_dpm.c index e22b11189628..c49934527a87 100644 --- a/drivers/gpu/drm/radeon/si_dpm.c +++ b/drivers/gpu/drm/radeon/si_dpm.c @@ -2999,6 +2999,49 @@ static void si_apply_state_adjust_rules(struct radeon_device *rdev, int i; struct si_dpm_quirk *p = si_dpm_quirk_list; + /* limit all SI kickers */ + if (rdev->family == CHIP_PITCAIRN) { + if ((rdev->pdev->revision == 0x81) || + (rdev->pdev->device == 0x6810) || + (rdev->pdev->device == 0x6811) || + (rdev->pdev->device == 0x6816) || + (rdev->pdev->device == 0x6817) || + (rdev->pdev->device == 0x6806)) + max_mclk = 120000; + } else if (rdev->family == CHIP_VERDE) { + if ((rdev->pdev->revision == 0x81) || + (rdev->pdev->revision == 0x83) || + (rdev->pdev->revision == 0x87) || + (rdev->pdev->device == 0x6820) || + (rdev->pdev->device == 0x6821) || + (rdev->pdev->device == 0x6822) || + (rdev->pdev->device == 0x6823) || + (rdev->pdev->device == 0x682A) || + (rdev->pdev->device == 0x682B)) { + max_sclk = 75000; + max_mclk = 80000; + } + } else if (rdev->family == CHIP_OLAND) { + if ((rdev->pdev->revision == 0xC7) || + (rdev->pdev->revision == 0x80) || + (rdev->pdev->revision == 0x81) || + (rdev->pdev->revision == 0x83) || + (rdev->pdev->device == 0x6604) || + (rdev->pdev->device == 0x6605)) { + max_sclk = 75000; + max_mclk = 80000; + } + } else if (rdev->family == CHIP_HAINAN) { + if ((rdev->pdev->revision == 0x81) || + (rdev->pdev->revision == 0x83) || + (rdev->pdev->revision == 0xC3) || + (rdev->pdev->device == 0x6664) || + (rdev->pdev->device == 0x6665) || + (rdev->pdev->device == 0x6667)) { + max_sclk = 75000; + max_mclk = 80000; + } + } /* Apply dpm quirks */ while (p && p->chip_device != 0) { if (rdev->pdev->vendor == p->chip_vendor && @@ -3011,22 +3054,6 @@ static void si_apply_state_adjust_rules(struct radeon_device *rdev, } ++p; } - /* limit mclk on all R7 370 parts for stability */ - if (rdev->pdev->device == 0x6811 && - rdev->pdev->revision == 0x81) - max_mclk = 120000; - /* limit sclk/mclk on Jet parts for stability */ - if (rdev->pdev->device == 0x6665 && - rdev->pdev->revision == 0xc3) { - max_sclk = 75000; - max_mclk = 80000; - } - /* limit clocks on HD8600 series */ - if (rdev->pdev->device == 0x6660 && - rdev->pdev->revision == 0x83) { - max_sclk = 75000; - max_mclk = 80000; - } if (rps->vce_active) { rps->evclk = rdev->pm.dpm.vce_states[rdev->pm.dpm.vce_level].evclk; From ad110449e285c75eb53357e87419a73c96ccb1b9 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Tue, 25 Oct 2016 14:42:51 +0100 Subject: [PATCH 137/792] PCI: qcom: Fix pp->dev usage before assignment Initialize pp->dev in qcom_pcie_probe() before calling get_resources(), which uses it. [bhelgaas: changelog] Fixes: e6a087eeaf91 ("PCI: qcom: Remove redundant struct qcom_pcie.dev") Signed-off-by: Srinivas Kandagatla Signed-off-by: Bjorn Helgaas --- drivers/pci/host/pcie-qcom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/host/pcie-qcom.c b/drivers/pci/host/pcie-qcom.c index ef0a84c7a588..35936409b2d4 100644 --- a/drivers/pci/host/pcie-qcom.c +++ b/drivers/pci/host/pcie-qcom.c @@ -533,11 +533,11 @@ static int qcom_pcie_probe(struct platform_device *pdev) if (IS_ERR(pcie->phy)) return PTR_ERR(pcie->phy); + pp->dev = dev; ret = pcie->ops->get_resources(pcie); if (ret) return ret; - pp->dev = dev; pp->root_bus_nr = -1; pp->ops = &qcom_pcie_dw_ops; From 05692d7005a364add85c6e25a6c4447ce08f913a Mon Sep 17 00:00:00 2001 From: Vlad Tsyrklevich Date: Wed, 12 Oct 2016 18:51:24 +0200 Subject: [PATCH 138/792] vfio/pci: Fix integer overflows, bitmask check The VFIO_DEVICE_SET_IRQS ioctl did not sufficiently sanitize user-supplied integers, potentially allowing memory corruption. This patch adds appropriate integer overflow checks, checks the range bounds for VFIO_IRQ_SET_DATA_NONE, and also verifies that only single element in the VFIO_IRQ_SET_DATA_TYPE_MASK bitmask is set. VFIO_IRQ_SET_ACTION_TYPE_MASK is already correctly checked later in vfio_pci_set_irqs_ioctl(). Furthermore, a kzalloc is changed to a kcalloc because the use of a kzalloc with an integer multiplication allowed an integer overflow condition to be reached without this patch. kcalloc checks for overflow and should prevent a similar occurrence. Signed-off-by: Vlad Tsyrklevich Signed-off-by: Alex Williamson --- drivers/vfio/pci/vfio_pci.c | 33 ++++++++++++++++++++----------- drivers/vfio/pci/vfio_pci_intrs.c | 2 +- 2 files changed, 22 insertions(+), 13 deletions(-) diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c index d624a527777f..031bc08d000d 100644 --- a/drivers/vfio/pci/vfio_pci.c +++ b/drivers/vfio/pci/vfio_pci.c @@ -829,8 +829,9 @@ static long vfio_pci_ioctl(void *device_data, } else if (cmd == VFIO_DEVICE_SET_IRQS) { struct vfio_irq_set hdr; + size_t size; u8 *data = NULL; - int ret = 0; + int max, ret = 0; minsz = offsetofend(struct vfio_irq_set, count); @@ -838,23 +839,31 @@ static long vfio_pci_ioctl(void *device_data, return -EFAULT; if (hdr.argsz < minsz || hdr.index >= VFIO_PCI_NUM_IRQS || + hdr.count >= (U32_MAX - hdr.start) || hdr.flags & ~(VFIO_IRQ_SET_DATA_TYPE_MASK | VFIO_IRQ_SET_ACTION_TYPE_MASK)) return -EINVAL; - if (!(hdr.flags & VFIO_IRQ_SET_DATA_NONE)) { - size_t size; - int max = vfio_pci_get_irq_count(vdev, hdr.index); + max = vfio_pci_get_irq_count(vdev, hdr.index); + if (hdr.start >= max || hdr.start + hdr.count > max) + return -EINVAL; - if (hdr.flags & VFIO_IRQ_SET_DATA_BOOL) - size = sizeof(uint8_t); - else if (hdr.flags & VFIO_IRQ_SET_DATA_EVENTFD) - size = sizeof(int32_t); - else - return -EINVAL; + switch (hdr.flags & VFIO_IRQ_SET_DATA_TYPE_MASK) { + case VFIO_IRQ_SET_DATA_NONE: + size = 0; + break; + case VFIO_IRQ_SET_DATA_BOOL: + size = sizeof(uint8_t); + break; + case VFIO_IRQ_SET_DATA_EVENTFD: + size = sizeof(int32_t); + break; + default: + return -EINVAL; + } - if (hdr.argsz - minsz < hdr.count * size || - hdr.start >= max || hdr.start + hdr.count > max) + if (size) { + if (hdr.argsz - minsz < hdr.count * size) return -EINVAL; data = memdup_user((void __user *)(arg + minsz), diff --git a/drivers/vfio/pci/vfio_pci_intrs.c b/drivers/vfio/pci/vfio_pci_intrs.c index c2e60893cd09..1c46045b0e7f 100644 --- a/drivers/vfio/pci/vfio_pci_intrs.c +++ b/drivers/vfio/pci/vfio_pci_intrs.c @@ -256,7 +256,7 @@ static int vfio_msi_enable(struct vfio_pci_device *vdev, int nvec, bool msix) if (!is_irq_none(vdev)) return -EINVAL; - vdev->ctx = kzalloc(nvec * sizeof(struct vfio_pci_irq_ctx), GFP_KERNEL); + vdev->ctx = kcalloc(nvec, sizeof(struct vfio_pci_irq_ctx), GFP_KERNEL); if (!vdev->ctx) return -ENOMEM; From 2876a34466ce382a76b9ffb34757bb48928ac743 Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Tue, 18 Oct 2016 16:30:09 -0400 Subject: [PATCH 139/792] sunrpc: don't pass on-stack memory to sg_set_buf As of ac4e97abce9b "scatterlist: sg_set_buf() argument must be in linear mapping", sg_set_buf hits a BUG when make_checksum_v2->xdr_process_buf, among other callers, passes it memory on the stack. We only need a scatterlist to pass this to the crypto code, and it seems like overkill to require kmalloc'd memory just to encrypt a few bytes, but for now this seems the best fix. Many of these callers are in the NFS write paths, so we allocate with GFP_NOFS. It might be possible to do without allocations here entirely, but that would probably be a bigger project. Cc: Rusty Russell Signed-off-by: J. Bruce Fields --- net/sunrpc/auth_gss/auth_gss.c | 13 +++-- net/sunrpc/auth_gss/gss_krb5_crypto.c | 84 ++++++++++++++++----------- net/sunrpc/auth_gss/svcauth_gss.c | 21 ++++--- 3 files changed, 72 insertions(+), 46 deletions(-) diff --git a/net/sunrpc/auth_gss/auth_gss.c b/net/sunrpc/auth_gss/auth_gss.c index d8bd97a5a7c9..3dfd769dc5b5 100644 --- a/net/sunrpc/auth_gss/auth_gss.c +++ b/net/sunrpc/auth_gss/auth_gss.c @@ -1616,7 +1616,7 @@ gss_validate(struct rpc_task *task, __be32 *p) { struct rpc_cred *cred = task->tk_rqstp->rq_cred; struct gss_cl_ctx *ctx = gss_cred_get_ctx(cred); - __be32 seq; + __be32 *seq = NULL; struct kvec iov; struct xdr_buf verf_buf; struct xdr_netobj mic; @@ -1631,9 +1631,12 @@ gss_validate(struct rpc_task *task, __be32 *p) goto out_bad; if (flav != RPC_AUTH_GSS) goto out_bad; - seq = htonl(task->tk_rqstp->rq_seqno); - iov.iov_base = &seq; - iov.iov_len = sizeof(seq); + seq = kmalloc(4, GFP_NOFS); + if (!seq) + goto out_bad; + *seq = htonl(task->tk_rqstp->rq_seqno); + iov.iov_base = seq; + iov.iov_len = 4; xdr_buf_from_iov(&iov, &verf_buf); mic.data = (u8 *)p; mic.len = len; @@ -1653,11 +1656,13 @@ gss_validate(struct rpc_task *task, __be32 *p) gss_put_ctx(ctx); dprintk("RPC: %5u %s: gss_verify_mic succeeded.\n", task->tk_pid, __func__); + kfree(seq); return p + XDR_QUADLEN(len); out_bad: gss_put_ctx(ctx); dprintk("RPC: %5u %s failed ret %ld.\n", task->tk_pid, __func__, PTR_ERR(ret)); + kfree(seq); return ret; } diff --git a/net/sunrpc/auth_gss/gss_krb5_crypto.c b/net/sunrpc/auth_gss/gss_krb5_crypto.c index 244245bcbbd2..90115ceefd49 100644 --- a/net/sunrpc/auth_gss/gss_krb5_crypto.c +++ b/net/sunrpc/auth_gss/gss_krb5_crypto.c @@ -166,8 +166,8 @@ make_checksum_hmac_md5(struct krb5_ctx *kctx, char *header, int hdrlen, unsigned int usage, struct xdr_netobj *cksumout) { struct scatterlist sg[1]; - int err; - u8 checksumdata[GSS_KRB5_MAX_CKSUM_LEN]; + int err = -1; + u8 *checksumdata; u8 rc4salt[4]; struct crypto_ahash *md5; struct crypto_ahash *hmac_md5; @@ -187,23 +187,22 @@ make_checksum_hmac_md5(struct krb5_ctx *kctx, char *header, int hdrlen, return GSS_S_FAILURE; } + checksumdata = kmalloc(GSS_KRB5_MAX_CKSUM_LEN, GFP_NOFS); + if (!checksumdata) + return GSS_S_FAILURE; + md5 = crypto_alloc_ahash("md5", 0, CRYPTO_ALG_ASYNC); if (IS_ERR(md5)) - return GSS_S_FAILURE; + goto out_free_cksum; hmac_md5 = crypto_alloc_ahash(kctx->gk5e->cksum_name, 0, CRYPTO_ALG_ASYNC); - if (IS_ERR(hmac_md5)) { - crypto_free_ahash(md5); - return GSS_S_FAILURE; - } + if (IS_ERR(hmac_md5)) + goto out_free_md5; req = ahash_request_alloc(md5, GFP_KERNEL); - if (!req) { - crypto_free_ahash(hmac_md5); - crypto_free_ahash(md5); - return GSS_S_FAILURE; - } + if (!req) + goto out_free_hmac_md5; ahash_request_set_callback(req, CRYPTO_TFM_REQ_MAY_SLEEP, NULL, NULL); @@ -232,11 +231,8 @@ make_checksum_hmac_md5(struct krb5_ctx *kctx, char *header, int hdrlen, ahash_request_free(req); req = ahash_request_alloc(hmac_md5, GFP_KERNEL); - if (!req) { - crypto_free_ahash(hmac_md5); - crypto_free_ahash(md5); - return GSS_S_FAILURE; - } + if (!req) + goto out_free_hmac_md5; ahash_request_set_callback(req, CRYPTO_TFM_REQ_MAY_SLEEP, NULL, NULL); @@ -258,8 +254,12 @@ make_checksum_hmac_md5(struct krb5_ctx *kctx, char *header, int hdrlen, cksumout->len = kctx->gk5e->cksumlength; out: ahash_request_free(req); - crypto_free_ahash(md5); +out_free_hmac_md5: crypto_free_ahash(hmac_md5); +out_free_md5: + crypto_free_ahash(md5); +out_free_cksum: + kfree(checksumdata); return err ? GSS_S_FAILURE : 0; } @@ -276,8 +276,8 @@ make_checksum(struct krb5_ctx *kctx, char *header, int hdrlen, struct crypto_ahash *tfm; struct ahash_request *req; struct scatterlist sg[1]; - int err; - u8 checksumdata[GSS_KRB5_MAX_CKSUM_LEN]; + int err = -1; + u8 *checksumdata; unsigned int checksumlen; if (kctx->gk5e->ctype == CKSUMTYPE_HMAC_MD5_ARCFOUR) @@ -291,15 +291,17 @@ make_checksum(struct krb5_ctx *kctx, char *header, int hdrlen, return GSS_S_FAILURE; } - tfm = crypto_alloc_ahash(kctx->gk5e->cksum_name, 0, CRYPTO_ALG_ASYNC); - if (IS_ERR(tfm)) + checksumdata = kmalloc(GSS_KRB5_MAX_CKSUM_LEN, GFP_NOFS); + if (checksumdata == NULL) return GSS_S_FAILURE; + tfm = crypto_alloc_ahash(kctx->gk5e->cksum_name, 0, CRYPTO_ALG_ASYNC); + if (IS_ERR(tfm)) + goto out_free_cksum; + req = ahash_request_alloc(tfm, GFP_KERNEL); - if (!req) { - crypto_free_ahash(tfm); - return GSS_S_FAILURE; - } + if (!req) + goto out_free_ahash; ahash_request_set_callback(req, CRYPTO_TFM_REQ_MAY_SLEEP, NULL, NULL); @@ -349,7 +351,10 @@ make_checksum(struct krb5_ctx *kctx, char *header, int hdrlen, cksumout->len = kctx->gk5e->cksumlength; out: ahash_request_free(req); +out_free_ahash: crypto_free_ahash(tfm); +out_free_cksum: + kfree(checksumdata); return err ? GSS_S_FAILURE : 0; } @@ -368,8 +373,8 @@ make_checksum_v2(struct krb5_ctx *kctx, char *header, int hdrlen, struct crypto_ahash *tfm; struct ahash_request *req; struct scatterlist sg[1]; - int err; - u8 checksumdata[GSS_KRB5_MAX_CKSUM_LEN]; + int err = -1; + u8 *checksumdata; unsigned int checksumlen; if (kctx->gk5e->keyed_cksum == 0) { @@ -383,16 +388,18 @@ make_checksum_v2(struct krb5_ctx *kctx, char *header, int hdrlen, return GSS_S_FAILURE; } + checksumdata = kmalloc(GSS_KRB5_MAX_CKSUM_LEN, GFP_NOFS); + if (!checksumdata) + return GSS_S_FAILURE; + tfm = crypto_alloc_ahash(kctx->gk5e->cksum_name, 0, CRYPTO_ALG_ASYNC); if (IS_ERR(tfm)) - return GSS_S_FAILURE; + goto out_free_cksum; checksumlen = crypto_ahash_digestsize(tfm); req = ahash_request_alloc(tfm, GFP_KERNEL); - if (!req) { - crypto_free_ahash(tfm); - return GSS_S_FAILURE; - } + if (!req) + goto out_free_ahash; ahash_request_set_callback(req, CRYPTO_TFM_REQ_MAY_SLEEP, NULL, NULL); @@ -433,7 +440,10 @@ make_checksum_v2(struct krb5_ctx *kctx, char *header, int hdrlen, } out: ahash_request_free(req); +out_free_ahash: crypto_free_ahash(tfm); +out_free_cksum: + kfree(checksumdata); return err ? GSS_S_FAILURE : 0; } @@ -666,14 +676,17 @@ gss_krb5_cts_crypt(struct crypto_skcipher *cipher, struct xdr_buf *buf, u32 ret; struct scatterlist sg[1]; SKCIPHER_REQUEST_ON_STACK(req, cipher); - u8 data[GSS_KRB5_MAX_BLOCKSIZE * 2]; + u8 *data; struct page **save_pages; u32 len = buf->len - offset; - if (len > ARRAY_SIZE(data)) { + if (len > GSS_KRB5_MAX_BLOCKSIZE * 2) { WARN_ON(0); return -ENOMEM; } + data = kmalloc(GSS_KRB5_MAX_BLOCKSIZE * 2, GFP_NOFS); + if (!data) + return -ENOMEM; /* * For encryption, we want to read from the cleartext @@ -708,6 +721,7 @@ gss_krb5_cts_crypt(struct crypto_skcipher *cipher, struct xdr_buf *buf, ret = write_bytes_to_xdr_buf(buf, offset, data, len); out: + kfree(data); return ret; } diff --git a/net/sunrpc/auth_gss/svcauth_gss.c b/net/sunrpc/auth_gss/svcauth_gss.c index d67f7e1bc82d..45662d7f0943 100644 --- a/net/sunrpc/auth_gss/svcauth_gss.c +++ b/net/sunrpc/auth_gss/svcauth_gss.c @@ -718,30 +718,37 @@ gss_write_null_verf(struct svc_rqst *rqstp) static int gss_write_verf(struct svc_rqst *rqstp, struct gss_ctx *ctx_id, u32 seq) { - __be32 xdr_seq; + __be32 *xdr_seq; u32 maj_stat; struct xdr_buf verf_data; struct xdr_netobj mic; __be32 *p; struct kvec iov; + int err = -1; svc_putnl(rqstp->rq_res.head, RPC_AUTH_GSS); - xdr_seq = htonl(seq); + xdr_seq = kmalloc(4, GFP_KERNEL); + if (!xdr_seq) + return -1; + *xdr_seq = htonl(seq); - iov.iov_base = &xdr_seq; - iov.iov_len = sizeof(xdr_seq); + iov.iov_base = xdr_seq; + iov.iov_len = 4; xdr_buf_from_iov(&iov, &verf_data); p = rqstp->rq_res.head->iov_base + rqstp->rq_res.head->iov_len; mic.data = (u8 *)(p + 1); maj_stat = gss_get_mic(ctx_id, &verf_data, &mic); if (maj_stat != GSS_S_COMPLETE) - return -1; + goto out; *p++ = htonl(mic.len); memset((u8 *)p + mic.len, 0, round_up_to_quad(mic.len) - mic.len); p += XDR_QUADLEN(mic.len); if (!xdr_ressize_check(rqstp, p)) - return -1; - return 0; + goto out; + err = 0; +out: + kfree(xdr_seq); + return err; } struct gss_domain { From 4d2b496f19f3c2cfaca1e8fa0710688b5ff3811d Mon Sep 17 00:00:00 2001 From: "Ewan D. Milne" Date: Wed, 26 Oct 2016 11:22:53 -0400 Subject: [PATCH 140/792] scsi: scsi_debug: Fix memory leak if LBP enabled and module is unloaded map_storep was not being vfree()'d in the module_exit call. Cc: Signed-off-by: Ewan D. Milne Reviewed-by: Laurence Oberman Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi_debug.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c index c905709707f0..cf04a364fd8b 100644 --- a/drivers/scsi/scsi_debug.c +++ b/drivers/scsi/scsi_debug.c @@ -5134,6 +5134,7 @@ static void __exit scsi_debug_exit(void) bus_unregister(&pseudo_lld_bus); root_device_unregister(pseudo_primary); + vfree(map_storep); vfree(dif_storep); vfree(fake_storep); kfree(sdebug_q_arr); From 2bf7dc8443e113844d078fd6541b7f4aa544f92f Mon Sep 17 00:00:00 2001 From: Ching Huang Date: Wed, 19 Oct 2016 17:50:26 +0800 Subject: [PATCH 141/792] scsi: arcmsr: Send SYNCHRONIZE_CACHE command to firmware The arcmsr driver failed to pass SYNCHRONIZE CACHE to controller firmware. Depending on how drive caches are handled internally by controller firmware this could potentially lead to data integrity problems. Ensure that cache flushes are passed to the controller. [mkp: applied by hand and removed unused vars] Cc: Signed-off-by: Ching Huang Reported-by: Tomas Henzl Signed-off-by: Martin K. Petersen --- drivers/scsi/arcmsr/arcmsr_hba.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c index 3d53d636b17b..f0cfb0451757 100644 --- a/drivers/scsi/arcmsr/arcmsr_hba.c +++ b/drivers/scsi/arcmsr/arcmsr_hba.c @@ -2636,18 +2636,9 @@ static int arcmsr_queue_command_lck(struct scsi_cmnd *cmd, struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata; struct CommandControlBlock *ccb; int target = cmd->device->id; - int lun = cmd->device->lun; - uint8_t scsicmd = cmd->cmnd[0]; cmd->scsi_done = done; cmd->host_scribble = NULL; cmd->result = 0; - if ((scsicmd == SYNCHRONIZE_CACHE) ||(scsicmd == SEND_DIAGNOSTIC)){ - if(acb->devstate[target][lun] == ARECA_RAID_GONE) { - cmd->result = (DID_NO_CONNECT << 16); - } - cmd->scsi_done(cmd); - return 0; - } if (target == 16) { /* virtual device for iop message transfer */ arcmsr_handle_virtual_command(acb, cmd); From d1f63f0c81c22ba705fcd149a1fcec37b734d818 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 26 Oct 2016 15:04:41 +0000 Subject: [PATCH 142/792] mmc: sdhci-msm: Fix error return code in sdhci_msm_probe() Fix to return a negative error code from the platform_get_irq_byname() error handling case instead of 0, as done elsewhere in this function. Fixes: ad81d3871004 ("mmc: sdhci-msm: Add support for UHS cards") Signed-off-by: Wei Yongjun Acked-by: Adrian Hunter Acked-by: Georgi Djakov Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci-msm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c index 8ef44a2a2fd9..90ed2e12d345 100644 --- a/drivers/mmc/host/sdhci-msm.c +++ b/drivers/mmc/host/sdhci-msm.c @@ -647,6 +647,7 @@ static int sdhci_msm_probe(struct platform_device *pdev) if (msm_host->pwr_irq < 0) { dev_err(&pdev->dev, "Get pwr_irq failed (%d)\n", msm_host->pwr_irq); + ret = msm_host->pwr_irq; goto clk_disable; } From 58e3948a87e39289aeda5753e9712092c8ca0745 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Thu, 13 Oct 2016 13:10:57 +0200 Subject: [PATCH 143/792] KVM: document lock orders This is long overdue, and not really hard. Signed-off-by: Paolo Bonzini Message-Id: <1476357057-17899-1-git-send-email-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini --- Documentation/virtual/kvm/locking.txt | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/Documentation/virtual/kvm/locking.txt b/Documentation/virtual/kvm/locking.txt index f2491a8c68b4..e5dd9f4d6100 100644 --- a/Documentation/virtual/kvm/locking.txt +++ b/Documentation/virtual/kvm/locking.txt @@ -4,7 +4,17 @@ KVM Lock Overview 1. Acquisition Orders --------------------- -(to be written) +The acquisition orders for mutexes are as follows: + +- kvm->lock is taken outside vcpu->mutex + +- kvm->lock is taken outside kvm->slots_lock and kvm->irq_lock + +- kvm->slots_lock is taken outside kvm->irq_lock, though acquiring + them together is quite rare. + +For spinlocks, kvm_lock is taken outside kvm->mmu_lock. Everything +else is a leaf: no other lock is taken inside the critical sections. 2: Exception ------------ From 85c856b39b479dde410ddd09df1da745343010c9 Mon Sep 17 00:00:00 2001 From: Jim Mattson Date: Wed, 26 Oct 2016 08:38:38 -0700 Subject: [PATCH 144/792] kvm: nVMX: Fix kernel panics induced by illegal INVEPT/INVVPID types Bitwise shifts by amounts greater than or equal to the width of the left operand are undefined. A malicious guest can exploit this to crash a 32-bit host, due to the BUG_ON(1)'s in handle_{invept,invvpid}. Signed-off-by: Jim Mattson Message-Id: <1477496318-17681-1-git-send-email-jmattson@google.com> [Change 1UL to 1, to match the range check on the shift count. - Paolo] Signed-off-by: Paolo Bonzini --- arch/x86/kvm/vmx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index cf1b16dbc98a..74a4df993a51 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -7659,7 +7659,7 @@ static int handle_invept(struct kvm_vcpu *vcpu) types = (vmx->nested.nested_vmx_ept_caps >> VMX_EPT_EXTENT_SHIFT) & 6; - if (!(types & (1UL << type))) { + if (type >= 32 || !(types & (1 << type))) { nested_vmx_failValid(vcpu, VMXERR_INVALID_OPERAND_TO_INVEPT_INVVPID); skip_emulated_instruction(vcpu); @@ -7722,7 +7722,7 @@ static int handle_invvpid(struct kvm_vcpu *vcpu) types = (vmx->nested.nested_vmx_vpid_caps >> 8) & 0x7; - if (!(types & (1UL << type))) { + if (type >= 32 || !(types & (1 << type))) { nested_vmx_failValid(vcpu, VMXERR_INVALID_OPERAND_TO_INVEPT_INVVPID); skip_emulated_instruction(vcpu); From d3532ea6ce4ea501e421d130555e59edc2945f99 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 18 Oct 2016 00:13:40 +0200 Subject: [PATCH 145/792] brcmfmac: avoid maybe-uninitialized warning in brcmf_cfg80211_start_ap MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit A bugfix added a sanity check around the assignment and use of the 'is_11d' variable, which looks correct to me, but as the function is rather complex already, this confuses the compiler to the point where it can no longer figure out if the variable is always initialized correctly: brcm80211/brcmfmac/cfg80211.c: In function ‘brcmf_cfg80211_start_ap’: brcm80211/brcmfmac/cfg80211.c:4586:10: error: ‘is_11d’ may be used uninitialized in this function [-Werror=maybe-uninitialized] This adds an initialization for the newly introduced case in which the variable should not really be used, in order to make the warning go away. Fixes: b3589dfe0212 ("brcmfmac: ignore 11d configuration errors") Cc: Hante Meuleman Cc: Arend van Spriel Cc: Kalle Valo Signed-off-by: Arnd Bergmann Signed-off-by: Kalle Valo --- drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c index b777e1b2f87a..78d9966a3957 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c @@ -4516,7 +4516,7 @@ brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, /* store current 11d setting */ if (brcmf_fil_cmd_int_get(ifp, BRCMF_C_GET_REGULATORY, &ifp->vif->is_11d)) { - supports_11d = false; + is_11d = supports_11d = false; } else { country_ie = brcmf_parse_tlvs((u8 *)settings->beacon.tail, settings->beacon.tail_len, From bb6a6e8e091353770074608c1d1bfde0e20b8154 Mon Sep 17 00:00:00 2001 From: Liping Zhang Date: Sat, 22 Oct 2016 18:51:24 +0800 Subject: [PATCH 146/792] netfilter: nft_dynset: fix panic if NFT_SET_HASH is not enabled When CONFIG_NFT_SET_HASH is not enabled and I input the following rule: "nft add rule filter output flow table test {ip daddr counter }", kernel panic happened on my system: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [< (null)>] (null) [...] Call Trace: [] ? nft_dynset_eval+0x56/0x100 [nf_tables] [] nft_do_chain+0xfb/0x4e0 [nf_tables] [] ? nf_conntrack_tuple_taken+0x61/0x210 [nf_conntrack] [] ? get_unique_tuple+0x136/0x560 [nf_nat] [] ? __nf_ct_ext_add_length+0x111/0x130 [nf_conntrack] [] ? nf_nat_setup_info+0x87/0x3b0 [nf_nat] [] ? ipt_do_table+0x327/0x610 [] ? __nf_nat_alloc_null_binding+0x57/0x80 [nf_nat] [] nft_ipv4_output+0xaf/0xd0 [nf_tables_ipv4] [] nf_iterate+0x55/0x60 [] nf_hook_slow+0x73/0xd0 Because in rbtree type set, ops->update is not implemented. So just keep it simple, in such case, report -EOPNOTSUPP to the user space. Fixes: 22fe54d5fefc ("netfilter: nf_tables: add support for dynamic set updates") Signed-off-by: Liping Zhang Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nft_dynset.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/netfilter/nft_dynset.c b/net/netfilter/nft_dynset.c index 517f08767a3c..bfdb689664b0 100644 --- a/net/netfilter/nft_dynset.c +++ b/net/netfilter/nft_dynset.c @@ -139,6 +139,9 @@ static int nft_dynset_init(const struct nft_ctx *ctx, return PTR_ERR(set); } + if (set->ops->update == NULL) + return -EOPNOTSUPP; + if (set->flags & NFT_SET_CONSTANT) return -EBUSY; From 61f9e2924f4981d626b3a931fed935f2fa3cb4de Mon Sep 17 00:00:00 2001 From: Liping Zhang Date: Sat, 22 Oct 2016 18:51:25 +0800 Subject: [PATCH 147/792] netfilter: nf_tables: fix *leak* when expr clone fail When nft_expr_clone failed, a series of problems will happen: 1. module refcnt will leak, we call __module_get at the beginning but we forget to put it back if ops->clone returns fail 2. memory will be leaked, if clone fail, we just return NULL and forget to free the alloced element 3. set->nelems will become incorrect when set->size is specified. If clone fail, we should decrease the set->nelems Now this patch fixes these problems. And fortunately, clone fail will only happen on counter expression when memory is exhausted. Fixes: 086f332167d6 ("netfilter: nf_tables: add clone interface to expression operations") Signed-off-by: Liping Zhang Signed-off-by: Pablo Neira Ayuso --- include/net/netfilter/nf_tables.h | 6 ++++-- net/netfilter/nf_tables_api.c | 11 ++++++----- net/netfilter/nft_dynset.c | 16 ++++++++++------ net/netfilter/nft_set_hash.c | 4 ++-- net/netfilter/nft_set_rbtree.c | 2 +- 5 files changed, 23 insertions(+), 16 deletions(-) diff --git a/include/net/netfilter/nf_tables.h b/include/net/netfilter/nf_tables.h index 5031e072567b..741dcded5b4f 100644 --- a/include/net/netfilter/nf_tables.h +++ b/include/net/netfilter/nf_tables.h @@ -542,7 +542,8 @@ void *nft_set_elem_init(const struct nft_set *set, const struct nft_set_ext_tmpl *tmpl, const u32 *key, const u32 *data, u64 timeout, gfp_t gfp); -void nft_set_elem_destroy(const struct nft_set *set, void *elem); +void nft_set_elem_destroy(const struct nft_set *set, void *elem, + bool destroy_expr); /** * struct nft_set_gc_batch_head - nf_tables set garbage collection batch @@ -693,7 +694,6 @@ static inline int nft_expr_clone(struct nft_expr *dst, struct nft_expr *src) { int err; - __module_get(src->ops->type->owner); if (src->ops->clone) { dst->ops = src->ops; err = src->ops->clone(dst, src); @@ -702,6 +702,8 @@ static inline int nft_expr_clone(struct nft_expr *dst, struct nft_expr *src) } else { memcpy(dst, src, src->ops->size); } + + __module_get(src->ops->type->owner); return 0; } diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 24db22257586..86e48aeb20be 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -3452,14 +3452,15 @@ void *nft_set_elem_init(const struct nft_set *set, return elem; } -void nft_set_elem_destroy(const struct nft_set *set, void *elem) +void nft_set_elem_destroy(const struct nft_set *set, void *elem, + bool destroy_expr) { struct nft_set_ext *ext = nft_set_elem_ext(set, elem); nft_data_uninit(nft_set_ext_key(ext), NFT_DATA_VALUE); if (nft_set_ext_exists(ext, NFT_SET_EXT_DATA)) nft_data_uninit(nft_set_ext_data(ext), set->dtype); - if (nft_set_ext_exists(ext, NFT_SET_EXT_EXPR)) + if (destroy_expr && nft_set_ext_exists(ext, NFT_SET_EXT_EXPR)) nf_tables_expr_destroy(NULL, nft_set_ext_expr(ext)); kfree(elem); @@ -3812,7 +3813,7 @@ void nft_set_gc_batch_release(struct rcu_head *rcu) gcb = container_of(rcu, struct nft_set_gc_batch, head.rcu); for (i = 0; i < gcb->head.cnt; i++) - nft_set_elem_destroy(gcb->head.set, gcb->elems[i]); + nft_set_elem_destroy(gcb->head.set, gcb->elems[i], true); kfree(gcb); } EXPORT_SYMBOL_GPL(nft_set_gc_batch_release); @@ -4030,7 +4031,7 @@ static void nf_tables_commit_release(struct nft_trans *trans) break; case NFT_MSG_DELSETELEM: nft_set_elem_destroy(nft_trans_elem_set(trans), - nft_trans_elem(trans).priv); + nft_trans_elem(trans).priv, true); break; } kfree(trans); @@ -4171,7 +4172,7 @@ static void nf_tables_abort_release(struct nft_trans *trans) break; case NFT_MSG_NEWSETELEM: nft_set_elem_destroy(nft_trans_elem_set(trans), - nft_trans_elem(trans).priv); + nft_trans_elem(trans).priv, true); break; } kfree(trans); diff --git a/net/netfilter/nft_dynset.c b/net/netfilter/nft_dynset.c index bfdb689664b0..31ca94793aa9 100644 --- a/net/netfilter/nft_dynset.c +++ b/net/netfilter/nft_dynset.c @@ -44,18 +44,22 @@ static void *nft_dynset_new(struct nft_set *set, const struct nft_expr *expr, ®s->data[priv->sreg_key], ®s->data[priv->sreg_data], timeout, GFP_ATOMIC); - if (elem == NULL) { - if (set->size) - atomic_dec(&set->nelems); - return NULL; - } + if (elem == NULL) + goto err1; ext = nft_set_elem_ext(set, elem); if (priv->expr != NULL && nft_expr_clone(nft_set_ext_expr(ext), priv->expr) < 0) - return NULL; + goto err2; return elem; + +err2: + nft_set_elem_destroy(set, elem, false); +err1: + if (set->size) + atomic_dec(&set->nelems); + return NULL; } static void nft_dynset_eval(const struct nft_expr *expr, diff --git a/net/netfilter/nft_set_hash.c b/net/netfilter/nft_set_hash.c index 3794cb2fc788..88d9fc8343e7 100644 --- a/net/netfilter/nft_set_hash.c +++ b/net/netfilter/nft_set_hash.c @@ -120,7 +120,7 @@ out: return true; err2: - nft_set_elem_destroy(set, he); + nft_set_elem_destroy(set, he, true); err1: return false; } @@ -332,7 +332,7 @@ static int nft_hash_init(const struct nft_set *set, static void nft_hash_elem_destroy(void *ptr, void *arg) { - nft_set_elem_destroy((const struct nft_set *)arg, ptr); + nft_set_elem_destroy((const struct nft_set *)arg, ptr, true); } static void nft_hash_destroy(const struct nft_set *set) diff --git a/net/netfilter/nft_set_rbtree.c b/net/netfilter/nft_set_rbtree.c index 38b5bda242f8..36493a7cae88 100644 --- a/net/netfilter/nft_set_rbtree.c +++ b/net/netfilter/nft_set_rbtree.c @@ -266,7 +266,7 @@ static void nft_rbtree_destroy(const struct nft_set *set) while ((node = priv->root.rb_node) != NULL) { rb_erase(node, &priv->root); rbe = rb_entry(node, struct nft_rbtree_elem, node); - nft_set_elem_destroy(set, rbe); + nft_set_elem_destroy(set, rbe, true); } } From dab45060a56a9732b027d2031c1b6100bc75eea2 Mon Sep 17 00:00:00 2001 From: Liping Zhang Date: Sat, 22 Oct 2016 18:51:26 +0800 Subject: [PATCH 148/792] netfilter: nf_tables: fix race when create new element in dynset Packets may race when create the new element in nft_hash_update: CPU0 CPU1 lookup_fast - fail lookup_fast - fail new - ok new - ok insert - ok insert - fail(EEXIST) So when race happened, we reuse the existing element. Otherwise, these *racing* packets will not be handled properly. Fixes: 22fe54d5fefc ("netfilter: nf_tables: add support for dynamic set updates") Signed-off-by: Liping Zhang Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nft_set_hash.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/net/netfilter/nft_set_hash.c b/net/netfilter/nft_set_hash.c index 88d9fc8343e7..a3dface3e6e6 100644 --- a/net/netfilter/nft_set_hash.c +++ b/net/netfilter/nft_set_hash.c @@ -98,7 +98,7 @@ static bool nft_hash_update(struct nft_set *set, const u32 *key, const struct nft_set_ext **ext) { struct nft_hash *priv = nft_set_priv(set); - struct nft_hash_elem *he; + struct nft_hash_elem *he, *prev; struct nft_hash_cmp_arg arg = { .genmask = NFT_GENMASK_ANY, .set = set, @@ -112,9 +112,18 @@ static bool nft_hash_update(struct nft_set *set, const u32 *key, he = new(set, expr, regs); if (he == NULL) goto err1; - if (rhashtable_lookup_insert_key(&priv->ht, &arg, &he->node, - nft_hash_params)) + + prev = rhashtable_lookup_get_insert_key(&priv->ht, &arg, &he->node, + nft_hash_params); + if (IS_ERR(prev)) goto err2; + + /* Another cpu may race to insert the element with the same key */ + if (prev) { + nft_set_elem_destroy(set, he, true); + he = prev; + } + out: *ext = &he->ext; return true; From 444f901742d054a4cd5ff045871eac5131646cfb Mon Sep 17 00:00:00 2001 From: Ulrich Weber Date: Mon, 24 Oct 2016 18:07:23 +0200 Subject: [PATCH 149/792] netfilter: nf_conntrack_sip: extend request line validation on SIP requests, so a fragmented TCP SIP packet from an allow header starting with INVITE,NOTIFY,OPTIONS,REFER,REGISTER,UPDATE,SUBSCRIBE Content-Length: 0 will not bet interpreted as an INVITE request. Also Request-URI must start with an alphabetic character. Confirm with RFC 3261 Request-Line = Method SP Request-URI SP SIP-Version CRLF Fixes: 30f33e6dee80 ("[NETFILTER]: nf_conntrack_sip: support method specific request/response handling") Signed-off-by: Ulrich Weber Acked-by: Marco Angaroni Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_conntrack_sip.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/net/netfilter/nf_conntrack_sip.c b/net/netfilter/nf_conntrack_sip.c index 621b81c7bddc..c3fc14e021ec 100644 --- a/net/netfilter/nf_conntrack_sip.c +++ b/net/netfilter/nf_conntrack_sip.c @@ -1436,9 +1436,12 @@ static int process_sip_request(struct sk_buff *skb, unsigned int protoff, handler = &sip_handlers[i]; if (handler->request == NULL) continue; - if (*datalen < handler->len || + if (*datalen < handler->len + 2 || strncasecmp(*dptr, handler->method, handler->len)) continue; + if ((*dptr)[handler->len] != ' ' || + !isalpha((*dptr)[handler->len+1])) + continue; if (ct_sip_get_header(ct, *dptr, 0, *datalen, SIP_HDR_CSEQ, &matchoff, &matchlen) <= 0) { From f1d505bb762e30bf316ff5d3b604914649d6aed3 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Tue, 25 Oct 2016 15:56:39 -0400 Subject: [PATCH 150/792] netfilter: nf_tables: fix type mismatch with error return from nft_parse_u32_check Commit 36b701fae12ac ("netfilter: nf_tables: validate maximum value of u32 netlink attributes") introduced nft_parse_u32_check with a return value of "unsigned int", yet on error it returns "-ERANGE". This patch corrects the mismatch by changing the return value to "int", which happens to match the actual users of nft_parse_u32_check already. Found by Coverity, CID 1373930. Note that commit 21a9e0f1568ea ("netfilter: nft_exthdr: fix error handling in nft_exthdr_init()) attempted to address the issue, but did not address the return type of nft_parse_u32_check. Signed-off-by: John W. Linville Cc: Laura Garcia Liebana Cc: Pablo Neira Ayuso Cc: Dan Carpenter Fixes: 36b701fae12ac ("netfilter: nf_tables: validate maximum value...") Signed-off-by: Pablo Neira Ayuso --- include/net/netfilter/nf_tables.h | 2 +- net/netfilter/nf_tables_api.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/include/net/netfilter/nf_tables.h b/include/net/netfilter/nf_tables.h index 741dcded5b4f..d79d1e9b9546 100644 --- a/include/net/netfilter/nf_tables.h +++ b/include/net/netfilter/nf_tables.h @@ -145,7 +145,7 @@ static inline enum nft_registers nft_type_to_reg(enum nft_data_types type) return type == NFT_DATA_VERDICT ? NFT_REG_VERDICT : NFT_REG_1 * NFT_REG_SIZE / NFT_REG32_SIZE; } -unsigned int nft_parse_u32_check(const struct nlattr *attr, int max, u32 *dest); +int nft_parse_u32_check(const struct nlattr *attr, int max, u32 *dest); unsigned int nft_parse_register(const struct nlattr *attr); int nft_dump_register(struct sk_buff *skb, unsigned int attr, unsigned int reg); diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 86e48aeb20be..365d31b86816 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -4422,7 +4422,7 @@ static int nf_tables_check_loops(const struct nft_ctx *ctx, * Otherwise a 0 is returned and the attribute value is stored in the * destination variable. */ -unsigned int nft_parse_u32_check(const struct nlattr *attr, int max, u32 *dest) +int nft_parse_u32_check(const struct nlattr *attr, int max, u32 *dest) { u32 val; From cdb436d181d21af4d273b49ec7734eecd6a37fe9 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Wed, 26 Oct 2016 23:46:17 +0200 Subject: [PATCH 151/792] netfilter: conntrack: avoid excess memory allocation This is now a fixed-size extension, so we don't need to pass a variable alloc size. This (harmless) error results in allocating 32 instead of the needed 16 bytes for this extension as the size gets passed twice. Fixes: 23014011ba420 ("netfilter: conntrack: support a fixed size of 128 distinct labels") Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- include/net/netfilter/nf_conntrack_labels.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/include/net/netfilter/nf_conntrack_labels.h b/include/net/netfilter/nf_conntrack_labels.h index 498814626e28..1723a67c0b0a 100644 --- a/include/net/netfilter/nf_conntrack_labels.h +++ b/include/net/netfilter/nf_conntrack_labels.h @@ -30,8 +30,7 @@ static inline struct nf_conn_labels *nf_ct_labels_ext_add(struct nf_conn *ct) if (net->ct.labels_used == 0) return NULL; - return nf_ct_ext_add_length(ct, NF_CT_EXT_LABELS, - sizeof(struct nf_conn_labels), GFP_ATOMIC); + return nf_ct_ext_add(ct, NF_CT_EXT_LABELS, GFP_ATOMIC); #else return NULL; #endif From 71451bdfc2f7bc67cf0b7a5d51bc1489aaa55701 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 26 Oct 2016 15:27:45 -0400 Subject: [PATCH 152/792] drm/amdgpu/si_dpm: workaround for SI kickers Consolidate existing quirks. Fixes stability issues on some kickers. Acked-by: Huang Rui Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/si_dpm.c | 59 +++++++++++++++++++++-------- 1 file changed, 43 insertions(+), 16 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/si_dpm.c b/drivers/gpu/drm/amd/amdgpu/si_dpm.c index ee77e9cb55b1..d6f85b1a0b93 100644 --- a/drivers/gpu/drm/amd/amdgpu/si_dpm.c +++ b/drivers/gpu/drm/amd/amdgpu/si_dpm.c @@ -3477,6 +3477,49 @@ static void si_apply_state_adjust_rules(struct amdgpu_device *adev, int i; struct si_dpm_quirk *p = si_dpm_quirk_list; + /* limit all SI kickers */ + if (adev->asic_type == CHIP_PITCAIRN) { + if ((adev->pdev->revision == 0x81) || + (adev->pdev->device == 0x6810) || + (adev->pdev->device == 0x6811) || + (adev->pdev->device == 0x6816) || + (adev->pdev->device == 0x6817) || + (adev->pdev->device == 0x6806)) + max_mclk = 120000; + } else if (adev->asic_type == CHIP_VERDE) { + if ((adev->pdev->revision == 0x81) || + (adev->pdev->revision == 0x83) || + (adev->pdev->revision == 0x87) || + (adev->pdev->device == 0x6820) || + (adev->pdev->device == 0x6821) || + (adev->pdev->device == 0x6822) || + (adev->pdev->device == 0x6823) || + (adev->pdev->device == 0x682A) || + (adev->pdev->device == 0x682B)) { + max_sclk = 75000; + max_mclk = 80000; + } + } else if (adev->asic_type == CHIP_OLAND) { + if ((adev->pdev->revision == 0xC7) || + (adev->pdev->revision == 0x80) || + (adev->pdev->revision == 0x81) || + (adev->pdev->revision == 0x83) || + (adev->pdev->device == 0x6604) || + (adev->pdev->device == 0x6605)) { + max_sclk = 75000; + max_mclk = 80000; + } + } else if (adev->asic_type == CHIP_HAINAN) { + if ((adev->pdev->revision == 0x81) || + (adev->pdev->revision == 0x83) || + (adev->pdev->revision == 0xC3) || + (adev->pdev->device == 0x6664) || + (adev->pdev->device == 0x6665) || + (adev->pdev->device == 0x6667)) { + max_sclk = 75000; + max_mclk = 80000; + } + } /* Apply dpm quirks */ while (p && p->chip_device != 0) { if (adev->pdev->vendor == p->chip_vendor && @@ -3489,22 +3532,6 @@ static void si_apply_state_adjust_rules(struct amdgpu_device *adev, } ++p; } - /* limit mclk on all R7 370 parts for stability */ - if (adev->pdev->device == 0x6811 && - adev->pdev->revision == 0x81) - max_mclk = 120000; - /* limit sclk/mclk on Jet parts for stability */ - if (adev->pdev->device == 0x6665 && - adev->pdev->revision == 0xc3) { - max_sclk = 75000; - max_mclk = 80000; - } - /* Limit clocks for some HD8600 parts */ - if (adev->pdev->device == 0x6660 && - adev->pdev->revision == 0x83) { - max_sclk = 75000; - max_mclk = 80000; - } if (rps->vce_active) { rps->evclk = adev->pm.dpm.vce_states[adev->pm.dpm.vce_level].evclk; From a2941d01267437b6edcd3e769ae9a461fe36ae62 Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Wed, 26 Oct 2016 12:56:07 +0800 Subject: [PATCH 153/792] drm/amd/powerplay: fix bug get wrong evv voltage of Polaris. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rex Zhu Acked-by: Christian König Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c | 2 +- drivers/gpu/drm/amd/powerplay/hwmgr/ppatomctrl.c | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c index 1167205057b3..2ba7937d2545 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c @@ -716,7 +716,7 @@ int phm_get_voltage_evv_on_sclk(struct pp_hwmgr *hwmgr, uint8_t voltage_type, *voltage = 1150; } else { ret = atomctrl_get_voltage_evv_on_sclk_ai(hwmgr, voltage_type, sclk, id, &vol); - *voltage = (uint16_t)vol/100; + *voltage = (uint16_t)(vol/100); } return ret; } diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomctrl.c b/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomctrl.c index 1126bd4f74dc..0894527d932f 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomctrl.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/ppatomctrl.c @@ -1320,7 +1320,8 @@ int atomctrl_get_voltage_evv_on_sclk_ai(struct pp_hwmgr *hwmgr, uint8_t voltage_ if (0 != result) return result; - *voltage = le32_to_cpu(((GET_EVV_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_3 *)(&get_voltage_info_param_space))->ulVoltageLevel); + *voltage = le32_to_cpu(((GET_EVV_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_3 *) + (&get_voltage_info_param_space))->ulVoltageLevel); return result; } From 796f4687bd622b0f8076b6695001ab5cdc2b722a Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Thu, 27 Oct 2016 20:14:45 +0200 Subject: [PATCH 154/792] kvm/x86: Show WRMSR data is in hex MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add the "0x" prefix to the error messages format to make it unambiguous about what kind of value we're talking about. Signed-off-by: Borislav Petkov Cc: Paolo Bonzini Cc: "Radim Krčmář" Message-Id: <20161027181445.25319-1-bp@alien8.de> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/x86.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index e375235d81c9..0b2087981c06 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -2262,7 +2262,7 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info) /* Drop writes to this legacy MSR -- see rdmsr * counterpart for further detail. */ - vcpu_unimpl(vcpu, "ignored wrmsr: 0x%x data %llx\n", msr, data); + vcpu_unimpl(vcpu, "ignored wrmsr: 0x%x data 0x%llx\n", msr, data); break; case MSR_AMD64_OSVW_ID_LENGTH: if (!guest_cpuid_has_osvw(vcpu)) @@ -2280,11 +2280,11 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info) if (kvm_pmu_is_valid_msr(vcpu, msr)) return kvm_pmu_set_msr(vcpu, msr_info); if (!ignore_msrs) { - vcpu_unimpl(vcpu, "unhandled wrmsr: 0x%x data %llx\n", + vcpu_unimpl(vcpu, "unhandled wrmsr: 0x%x data 0x%llx\n", msr, data); return 1; } else { - vcpu_unimpl(vcpu, "ignored wrmsr: 0x%x data %llx\n", + vcpu_unimpl(vcpu, "ignored wrmsr: 0x%x data 0x%llx\n", msr, data); break; } From e2796541ef1d82c73334bfde89b97c9174c8d057 Mon Sep 17 00:00:00 2001 From: Cyrille Pitchen Date: Wed, 19 Oct 2016 17:34:49 +0200 Subject: [PATCH 155/792] MAINTAINERS: add a maintainer for the SPI NOR subsystem I would like to volunteer as a maintainer for the SPI NOR part of the MTD subsystem. Over the last months, a significant number of SPI NOR related patches have been submitted, some of them have been reviewed, but very few have finally been merged. Hence, the number of pending SPI NOR related patches continues to increase over the time. Through my work on SPI NOR memories from many manufacturers over the last two years, I've gained a solid understanding of this technology. I've already helped by reviewing patches from other contributors on the mailing list, and would like to help getting those patches integrated by volunteering as a maintainer for this specific area. Boris Brezillon has already stepped up as a maintainer for the NAND sub-subsystem in MTD, and the SPI NOR sub-subsystem could be handled in the same way: I would be reviewing patches touching this area, collecting them and sending pull requests to Brian Norris. Also Marek Vasut has volunteered as well as maintainer for the SPI NOR subsystem. Signed-off-by: Cyrille Pitchen Acked-by: Boris Brezillon Acked-by: Marek Vasut Acked-by: Jagan Teki Signed-off-by: Brian Norris --- MAINTAINERS | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 1cd38a7e0064..2e87047515f8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11392,6 +11392,17 @@ W: http://www.st.com/spear S: Maintained F: drivers/clk/spear/ +SPI NOR SUBSYSTEM +M: Cyrille Pitchen +M: Marek Vasut +L: linux-mtd@lists.infradead.org +W: http://www.linux-mtd.infradead.org/ +Q: http://patchwork.ozlabs.org/project/linux-mtd/list/ +T: git git://github.com/spi-nor/linux.git +S: Maintained +F: drivers/mtd/spi-nor/ +F: include/linux/mtd/spi-nor.h + SPI SUBSYSTEM M: Mark Brown L: linux-spi@vger.kernel.org From 30656167bd2347bf867a09cbae2705bd927d3983 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Mon, 24 Oct 2016 14:35:26 +0200 Subject: [PATCH 156/792] MAINTAINERS: add more people to the MTD maintainer team Brian has been maintaining the MTD subsystem alone for several years now, and maintaining such a subsystem can really be time consuming. Create a maintainer team formed of the most active MTD contributors to help Brian with this task, which will hopefully improve the subsystem reactivity. Signed-off-by: Boris Brezillon Acked-by: Cyrille Pitchen Acked-by: Marek Vasut Acked-by: Richard Weinberger Signed-off-by: Brian Norris --- MAINTAINERS | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 2e87047515f8..11a1c065ea91 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7912,6 +7912,10 @@ F: mm/ MEMORY TECHNOLOGY DEVICES (MTD) M: David Woodhouse M: Brian Norris +M: Boris Brezillon +M: Marek Vasut +M: Richard Weinberger +M: Cyrille Pitchen L: linux-mtd@lists.infradead.org W: http://www.linux-mtd.infradead.org/ Q: http://patchwork.ozlabs.org/project/linux-mtd/list/ From 5c4a9129b81027eca12aeaf2fa9defb45150f533 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Wed, 26 Oct 2016 08:12:20 +0200 Subject: [PATCH 157/792] clk/samsung: Use CLK_OF_DECLARE_DRIVER initialization method for CLKOUT The Exynos PMU node is an interrupt, clock and PMU (Power Management Unit) controller, and these functionalities are supported by different drivers that matches the same compatible strings. Since commit 989eafd0b609 ("clk: core: Avoid double initialization of clocks") the OF core flags clock controllers registered with the CLK_OF_DECLARE() macro as OF_POPULATED, so platform devices with the same compatible string will not be registered. This prevents the PMU platform device to be created, so the Exynos PMU driver is never probed. This breaks (among other things) Suspend-to-RAM. Fix this by changing CLKOUT driver initialization method to CLK_OF_DECLARE_DRIVER(), which doesn't clear the OF_POPULATED flag, so later a platform device is created and the Exynos PMU platform driver can be be probed properly. Fixes: 989eafd0b609 ("clk: core: Avoid double initialization of clocks") Signed-off-by: Marek Szyprowski Reviewed-by: Javier Martinez Canillas Reviewed-by: Chanwoo Choi Signed-off-by: Stephen Boyd --- drivers/clk/samsung/clk-exynos-clkout.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-) diff --git a/drivers/clk/samsung/clk-exynos-clkout.c b/drivers/clk/samsung/clk-exynos-clkout.c index 96fab6cfb202..6c6afb87b4ce 100644 --- a/drivers/clk/samsung/clk-exynos-clkout.c +++ b/drivers/clk/samsung/clk-exynos-clkout.c @@ -132,28 +132,34 @@ free_clkout: pr_err("%s: failed to register clkout clock\n", __func__); } +/* + * We use CLK_OF_DECLARE_DRIVER initialization method to avoid setting + * the OF_POPULATED flag on the pmu device tree node, so later the + * Exynos PMU platform device can be properly probed with PMU driver. + */ + static void __init exynos4_clkout_init(struct device_node *node) { exynos_clkout_init(node, EXYNOS4_CLKOUT_MUX_MASK); } -CLK_OF_DECLARE(exynos4210_clkout, "samsung,exynos4210-pmu", +CLK_OF_DECLARE_DRIVER(exynos4210_clkout, "samsung,exynos4210-pmu", exynos4_clkout_init); -CLK_OF_DECLARE(exynos4212_clkout, "samsung,exynos4212-pmu", +CLK_OF_DECLARE_DRIVER(exynos4212_clkout, "samsung,exynos4212-pmu", exynos4_clkout_init); -CLK_OF_DECLARE(exynos4412_clkout, "samsung,exynos4412-pmu", +CLK_OF_DECLARE_DRIVER(exynos4412_clkout, "samsung,exynos4412-pmu", exynos4_clkout_init); -CLK_OF_DECLARE(exynos3250_clkout, "samsung,exynos3250-pmu", +CLK_OF_DECLARE_DRIVER(exynos3250_clkout, "samsung,exynos3250-pmu", exynos4_clkout_init); static void __init exynos5_clkout_init(struct device_node *node) { exynos_clkout_init(node, EXYNOS5_CLKOUT_MUX_MASK); } -CLK_OF_DECLARE(exynos5250_clkout, "samsung,exynos5250-pmu", +CLK_OF_DECLARE_DRIVER(exynos5250_clkout, "samsung,exynos5250-pmu", exynos5_clkout_init); -CLK_OF_DECLARE(exynos5410_clkout, "samsung,exynos5410-pmu", +CLK_OF_DECLARE_DRIVER(exynos5410_clkout, "samsung,exynos5410-pmu", exynos5_clkout_init); -CLK_OF_DECLARE(exynos5420_clkout, "samsung,exynos5420-pmu", +CLK_OF_DECLARE_DRIVER(exynos5420_clkout, "samsung,exynos5420-pmu", exynos5_clkout_init); -CLK_OF_DECLARE(exynos5433_clkout, "samsung,exynos5433-pmu", +CLK_OF_DECLARE_DRIVER(exynos5433_clkout, "samsung,exynos5433-pmu", exynos5_clkout_init); From ce93bedb5ed2b16c08c6df4c797865f9ead600a3 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sat, 22 Oct 2016 14:15:22 -0200 Subject: [PATCH 158/792] mtd: nand: gpmi: disable the clocks on errors We should disable the previously enabled GPMI clocks in the error paths. Also, when gpmi_enable_clk() fails simply return the error code immediately rather than jumping to to the 'err_out' label. Signed-off-by: Fabio Estevam Reviewed-by: Marek Vasut Acked-by: Han Xu Signed-off-by: Boris Brezillon --- drivers/mtd/nand/gpmi-nand/gpmi-lib.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c index 0f68a99fc4ad..141bd70a49c2 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c @@ -161,7 +161,7 @@ int gpmi_init(struct gpmi_nand_data *this) ret = gpmi_enable_clk(this); if (ret) - goto err_out; + return ret; ret = gpmi_reset_block(r->gpmi_regs, false); if (ret) goto err_out; @@ -197,6 +197,7 @@ int gpmi_init(struct gpmi_nand_data *this) gpmi_disable_clk(this); return 0; err_out: + gpmi_disable_clk(this); return ret; } @@ -270,7 +271,7 @@ int bch_set_geometry(struct gpmi_nand_data *this) ret = gpmi_enable_clk(this); if (ret) - goto err_out; + return ret; /* * Due to erratum #2847 of the MX23, the BCH cannot be soft reset on this @@ -308,6 +309,7 @@ int bch_set_geometry(struct gpmi_nand_data *this) gpmi_disable_clk(this); return 0; err_out: + gpmi_disable_clk(this); return ret; } From 73f907fd5fa56b0066d199bdd7126bbd04f6cd7b Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Mon, 24 Oct 2016 16:46:20 +0200 Subject: [PATCH 159/792] mtd: nand: Fix data interface configuration logic When changing from one data interface setting to another, one has to ensure a specific sequence which is described in the ONFI spec. One of these constraints is that the CE line has go high after a reset before a command can be sent with the new data interface setting, which is not guaranteed by the current implementation. Rework the nand_reset() function and all the call sites to make sure the CE line is asserted and released when required. Also make sure to actually apply the new data interface setting on the first die. Signed-off-by: Boris Brezillon Fixes: d8e725dd8311 ("mtd: nand: automate NAND timings selection") Reviewed-by: Sascha Hauer Tested-by: Marc Gonzalez --- drivers/mtd/nand/nand_base.c | 60 +++++++++++++++++++++++++----------- include/linux/mtd/nand.h | 2 +- 2 files changed, 43 insertions(+), 19 deletions(-) diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index e5718e5ecf92..3bde96a3f7bf 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -1095,10 +1095,11 @@ static void nand_release_data_interface(struct nand_chip *chip) /** * nand_reset - Reset and initialize a NAND device * @chip: The NAND chip + * @chipnr: Internal die id * * Returns 0 for success or negative error code otherwise */ -int nand_reset(struct nand_chip *chip) +int nand_reset(struct nand_chip *chip, int chipnr) { struct mtd_info *mtd = nand_to_mtd(chip); int ret; @@ -1107,9 +1108,17 @@ int nand_reset(struct nand_chip *chip) if (ret) return ret; + /* + * The CS line has to be released before we can apply the new NAND + * interface settings, hence this weird ->select_chip() dance. + */ + chip->select_chip(mtd, chipnr); chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1); + chip->select_chip(mtd, -1); + chip->select_chip(mtd, chipnr); ret = nand_setup_data_interface(chip); + chip->select_chip(mtd, -1); if (ret) return ret; @@ -1185,8 +1194,6 @@ int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) /* Shift to get chip number */ chipnr = ofs >> chip->chip_shift; - chip->select_chip(mtd, chipnr); - /* * Reset the chip. * If we want to check the WP through READ STATUS and check the bit 7 @@ -1194,7 +1201,9 @@ int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len) * some operation can also clear the bit 7 of status register * eg. erase/program a locked block */ - nand_reset(chip); + nand_reset(chip, chipnr); + + chip->select_chip(mtd, chipnr); /* Check, if it is write protected */ if (nand_check_wp(mtd)) { @@ -1244,8 +1253,6 @@ int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) /* Shift to get chip number */ chipnr = ofs >> chip->chip_shift; - chip->select_chip(mtd, chipnr); - /* * Reset the chip. * If we want to check the WP through READ STATUS and check the bit 7 @@ -1253,7 +1260,9 @@ int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len) * some operation can also clear the bit 7 of status register * eg. erase/program a locked block */ - nand_reset(chip); + nand_reset(chip, chipnr); + + chip->select_chip(mtd, chipnr); /* Check, if it is write protected */ if (nand_check_wp(mtd)) { @@ -2940,10 +2949,6 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to, } chipnr = (int)(to >> chip->chip_shift); - chip->select_chip(mtd, chipnr); - - /* Shift to get page */ - page = (int)(to >> chip->page_shift); /* * Reset the chip. Some chips (like the Toshiba TC5832DC found in one @@ -2951,7 +2956,12 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to, * if we don't do this. I have no clue why, but I seem to have 'fixed' * it in the doc2000 driver in August 1999. dwmw2. */ - nand_reset(chip); + nand_reset(chip, chipnr); + + chip->select_chip(mtd, chipnr); + + /* Shift to get page */ + page = (int)(to >> chip->page_shift); /* Check, if it is write protected */ if (nand_check_wp(mtd)) { @@ -3984,14 +3994,14 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, int i, maf_idx; u8 id_data[8]; - /* Select the device */ - chip->select_chip(mtd, 0); - /* * Reset the chip, required by some chips (e.g. Micron MT29FxGxxxxx) * after power-up. */ - nand_reset(chip); + nand_reset(chip, 0); + + /* Select the device */ + chip->select_chip(mtd, 0); /* Send the command for reading device ID */ chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1); @@ -4329,17 +4339,31 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips, return PTR_ERR(type); } + /* Initialize the ->data_interface field. */ ret = nand_init_data_interface(chip); if (ret) return ret; + /* + * Setup the data interface correctly on the chip and controller side. + * This explicit call to nand_setup_data_interface() is only required + * for the first die, because nand_reset() has been called before + * ->data_interface and ->default_onfi_timing_mode were set. + * For the other dies, nand_reset() will automatically switch to the + * best mode for us. + */ + ret = nand_setup_data_interface(chip); + if (ret) + return ret; + chip->select_chip(mtd, -1); /* Check for a chip array */ for (i = 1; i < maxchips; i++) { - chip->select_chip(mtd, i); /* See comment in nand_get_flash_type for reset */ - nand_reset(chip); + nand_reset(chip, i); + + chip->select_chip(mtd, i); /* Send the command for reading device ID */ chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1); /* Read manufacturer and device IDs */ diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index c5d3d5024fc8..d8905a229f34 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -1184,7 +1184,7 @@ int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip, int page); /* Reset and initialize a NAND device */ -int nand_reset(struct nand_chip *chip); +int nand_reset(struct nand_chip *chip, int chipnr); /* Free resources held by the NAND device */ void nand_cleanup(struct nand_chip *chip); From 237d6e6884136923b6bd26d5141ebe1d065960c9 Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Tue, 25 Oct 2016 16:24:28 +0200 Subject: [PATCH 160/792] s390/hypfs: Use get_free_page() instead of kmalloc to ensure page alignment Since commit d86bd1bece6f ("mm/slub: support left redzone") it is no longer guaranteed that kmalloc(PAGE_SIZE) returns page aligned memory. After the above commit we get an error for diag224 because aligned memory is required. This leads to the following user visible error: # mount none -t s390_hypfs /sys/hypervisor/ mount: unknown filesystem type 's390_hypfs' # dmesg | grep hypfs hypfs.cccfb8: The hardware system does not provide all functions required by hypfs hypfs.7a79f0: Initialization of hypfs failed with rc=-61 Fix this problem and use get_free_page() instead of kmalloc() to get correctly aligned memory. Cc: stable@vger.kernel.org # v3.6+ Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky --- arch/s390/hypfs/hypfs_diag.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/s390/hypfs/hypfs_diag.c b/arch/s390/hypfs/hypfs_diag.c index 28f03ca60100..794bebb43d23 100644 --- a/arch/s390/hypfs/hypfs_diag.c +++ b/arch/s390/hypfs/hypfs_diag.c @@ -363,11 +363,11 @@ out: static int diag224_get_name_table(void) { /* memory must be below 2GB */ - diag224_cpu_names = kmalloc(PAGE_SIZE, GFP_KERNEL | GFP_DMA); + diag224_cpu_names = (char *) __get_free_page(GFP_KERNEL | GFP_DMA); if (!diag224_cpu_names) return -ENOMEM; if (diag224(diag224_cpu_names)) { - kfree(diag224_cpu_names); + free_page((unsigned long) diag224_cpu_names); return -EOPNOTSUPP; } EBCASC(diag224_cpu_names + 16, (*diag224_cpu_names + 1) * 16); @@ -376,7 +376,7 @@ static int diag224_get_name_table(void) static void diag224_delete_name_table(void) { - kfree(diag224_cpu_names); + free_page((unsigned long) diag224_cpu_names); } static int diag224_idx2name(int index, char *name) From 8ff0513bdcdd71e84aa561cce216675d43fb41b8 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 18 Oct 2016 00:05:31 +0200 Subject: [PATCH 161/792] mtd: mtk: avoid warning in mtk_ecc_encode When building with -Wmaybe-uninitialized, gcc produces a silly false positive warning for the mtk_ecc_encode function: drivers/mtd/nand/mtk_ecc.c: In function 'mtk_ecc_encode': drivers/mtd/nand/mtk_ecc.c:402:15: error: 'val' may be used uninitialized in this function [-Werror=maybe-uninitialized] The function for some reason contains a double byte swap on big-endian builds to get the OOB data into the correct order again, and is written in a slightly confusing way. Using a simple memcpy32_fromio() to read the data simplifies it a lot so it becomes more readable and produces no warning. However, the output might not have 32-bit alignment, so we have to use another memcpy to avoid taking alignment faults or writing beyond the end of the array. Signed-off-by: Arnd Bergmann Tested-by: RogerCC Lin Signed-off-by: Boris Brezillon --- drivers/mtd/nand/mtk_ecc.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) diff --git a/drivers/mtd/nand/mtk_ecc.c b/drivers/mtd/nand/mtk_ecc.c index d54f666417e1..dbf256217b3e 100644 --- a/drivers/mtd/nand/mtk_ecc.c +++ b/drivers/mtd/nand/mtk_ecc.c @@ -86,6 +86,8 @@ struct mtk_ecc { struct completion done; struct mutex lock; u32 sectors; + + u8 eccdata[112]; }; static inline void mtk_ecc_wait_idle(struct mtk_ecc *ecc, @@ -366,9 +368,8 @@ int mtk_ecc_encode(struct mtk_ecc *ecc, struct mtk_ecc_config *config, u8 *data, u32 bytes) { dma_addr_t addr; - u8 *p; - u32 len, i, val; - int ret = 0; + u32 len; + int ret; addr = dma_map_single(ecc->dev, data, bytes, DMA_TO_DEVICE); ret = dma_mapping_error(ecc->dev, addr); @@ -393,14 +394,12 @@ int mtk_ecc_encode(struct mtk_ecc *ecc, struct mtk_ecc_config *config, /* Program ECC bytes to OOB: per sector oob = FDM + ECC + SPARE */ len = (config->strength * ECC_PARITY_BITS + 7) >> 3; - p = data + bytes; - /* write the parity bytes generated by the ECC back to the OOB region */ - for (i = 0; i < len; i++) { - if ((i % 4) == 0) - val = readl(ecc->regs + ECC_ENCPAR(i / 4)); - p[i] = (val >> ((i % 4) * 8)) & 0xff; - } + /* write the parity bytes generated by the ECC back to temp buffer */ + __ioread32_copy(ecc->eccdata, ecc->regs + ECC_ENCPAR(0), round_up(len, 4)); + + /* copy into possibly unaligned OOB region with actual length */ + memcpy(data + bytes, ecc->eccdata, len); timeout: dma_unmap_single(ecc->dev, addr, bytes, DMA_TO_DEVICE); From bd768e146624cbec7122ed15dead8daa137d909d Mon Sep 17 00:00:00 2001 From: Ido Yariv Date: Fri, 21 Oct 2016 12:39:57 -0400 Subject: [PATCH 162/792] KVM: x86: fix wbinvd_dirty_mask use-after-free MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit vcpu->arch.wbinvd_dirty_mask may still be used after freeing it, corrupting memory. For example, the following call trace may set a bit in an already freed cpu mask: kvm_arch_vcpu_load vcpu_load vmx_free_vcpu_nested vmx_free_vcpu kvm_arch_vcpu_free Fix this by deferring freeing of wbinvd_dirty_mask. Cc: stable@vger.kernel.org Signed-off-by: Ido Yariv Reviewed-by: Paolo Bonzini Signed-off-by: Radim Krčmář --- arch/x86/kvm/x86.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 0b2087981c06..e954be8a3185 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -7410,10 +7410,12 @@ void kvm_put_guest_fpu(struct kvm_vcpu *vcpu) void kvm_arch_vcpu_free(struct kvm_vcpu *vcpu) { + void *wbinvd_dirty_mask = vcpu->arch.wbinvd_dirty_mask; + kvmclock_reset(vcpu); - free_cpumask_var(vcpu->arch.wbinvd_dirty_mask); kvm_x86_ops->vcpu_free(vcpu); + free_cpumask_var(wbinvd_dirty_mask); } struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, From 5747620257812530adda58cbff591fede6fb261e Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 24 Oct 2016 17:34:32 +0200 Subject: [PATCH 163/792] netfilter: ip_vs_sync: fix bogus maybe-uninitialized warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Building the ip_vs_sync code with CONFIG_OPTIMIZE_INLINING on x86 confuses the compiler to the point where it produces a rather dubious warning message: net/netfilter/ipvs/ip_vs_sync.c:1073:33: error: ‘opt.init_seq’ may be used uninitialized in this function [-Werror=maybe-uninitialized] struct ip_vs_sync_conn_options opt; ^~~ net/netfilter/ipvs/ip_vs_sync.c:1073:33: error: ‘opt.delta’ may be used uninitialized in this function [-Werror=maybe-uninitialized] net/netfilter/ipvs/ip_vs_sync.c:1073:33: error: ‘opt.previous_delta’ may be used uninitialized in this function [-Werror=maybe-uninitialized] net/netfilter/ipvs/ip_vs_sync.c:1073:33: error: ‘*((void *)&opt+12).init_seq’ may be used uninitialized in this function [-Werror=maybe-uninitialized] net/netfilter/ipvs/ip_vs_sync.c:1073:33: error: ‘*((void *)&opt+12).delta’ may be used uninitialized in this function [-Werror=maybe-uninitialized] net/netfilter/ipvs/ip_vs_sync.c:1073:33: error: ‘*((void *)&opt+12).previous_delta’ may be used uninitialized in this function [-Werror=maybe-uninitialized] The problem appears to be a combination of a number of factors, including the __builtin_bswap32 compiler builtin being slightly odd, having a large amount of code inlined into a single function, and the way that some functions only get partially inlined here. I've spent way too much time trying to work out a way to improve the code, but the best I've come up with is to add an explicit memset right before the ip_vs_seq structure is first initialized here. When the compiler works correctly, this has absolutely no effect, but in the case that produces the warning, the warning disappears. In the process of analysing this warning, I also noticed that we use memcpy to copy the larger ip_vs_sync_conn_options structure over two members of the ip_vs_conn structure. This works because the layout is identical, but seems error-prone, so I'm changing this in the process to directly copy the two members. This change seemed to have no effect on the object code or the warning, but it deals with the same data, so I kept the two changes together. Signed-off-by: Arnd Bergmann Acked-by: Julian Anastasov Signed-off-by: Simon Horman Signed-off-by: Pablo Neira Ayuso --- net/netfilter/ipvs/ip_vs_sync.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/net/netfilter/ipvs/ip_vs_sync.c b/net/netfilter/ipvs/ip_vs_sync.c index 1b07578bedf3..9350530c16c1 100644 --- a/net/netfilter/ipvs/ip_vs_sync.c +++ b/net/netfilter/ipvs/ip_vs_sync.c @@ -283,6 +283,7 @@ struct ip_vs_sync_buff { */ static void ntoh_seq(struct ip_vs_seq *no, struct ip_vs_seq *ho) { + memset(ho, 0, sizeof(*ho)); ho->init_seq = get_unaligned_be32(&no->init_seq); ho->delta = get_unaligned_be32(&no->delta); ho->previous_delta = get_unaligned_be32(&no->previous_delta); @@ -917,8 +918,10 @@ static void ip_vs_proc_conn(struct netns_ipvs *ipvs, struct ip_vs_conn_param *pa kfree(param->pe_data); } - if (opt) - memcpy(&cp->in_seq, opt, sizeof(*opt)); + if (opt) { + cp->in_seq = opt->in_seq; + cp->out_seq = opt->out_seq; + } atomic_set(&cp->in_pkts, sysctl_sync_threshold(ipvs)); cp->state = state; cp->old_state = cp->state; From 9cccc76bb49ffcc0370a37a6c01368d69cc3b65b Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Thu, 15 Sep 2016 16:28:54 +0300 Subject: [PATCH 164/792] drm/i915: keep declarations in i915_drv.h Fix sparse warnings: drivers/gpu/drm/i915/i915_drv.c:1179:5: warning: symbol 'i915_driver_load' was not declared. Should it be static? drivers/gpu/drm/i915/i915_drv.c:1267:6: warning: symbol 'i915_driver_unload' was not declared. Should it be static? drivers/gpu/drm/i915/i915_drv.c:2444:25: warning: symbol 'i915_pm_ops' was not declared. Should it be static? Fixes: 42f5551d2769 ("drm/i915: Split out the PCI driver interface to i915_pci.c") Cc: Chris Wilson Cc: Joonas Lahtinen Reviewed-by: Daniel Vetter Signed-off-by: Jani Nikula Link: http://patchwork.freedesktop.org/patch/msgid/1473946137-1931-3-git-send-email-jani.nikula@intel.com (cherry picked from commit efab0698f94dd71fac5d946ad664a280441daedb) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_drv.h | 5 +++++ drivers/gpu/drm/i915/i915_pci.c | 7 ------- 2 files changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 8b9ee4e390c0..685e9e065287 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -2883,6 +2883,11 @@ __i915_printk(struct drm_i915_private *dev_priv, const char *level, extern long i915_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg); #endif +extern const struct dev_pm_ops i915_pm_ops; + +extern int i915_driver_load(struct pci_dev *pdev, + const struct pci_device_id *ent); +extern void i915_driver_unload(struct drm_device *dev); extern int intel_gpu_reset(struct drm_i915_private *dev_priv, u32 engine_mask); extern bool intel_has_gpu_reset(struct drm_i915_private *dev_priv); extern void i915_reset(struct drm_i915_private *dev_priv); diff --git a/drivers/gpu/drm/i915/i915_pci.c b/drivers/gpu/drm/i915/i915_pci.c index 687c768833b3..31e6edd08dd0 100644 --- a/drivers/gpu/drm/i915/i915_pci.c +++ b/drivers/gpu/drm/i915/i915_pci.c @@ -431,9 +431,6 @@ static const struct pci_device_id pciidlist[] = { }; MODULE_DEVICE_TABLE(pci, pciidlist); -extern int i915_driver_load(struct pci_dev *pdev, - const struct pci_device_id *ent); - static int i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { struct intel_device_info *intel_info = @@ -463,8 +460,6 @@ static int i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) return i915_driver_load(pdev, ent); } -extern void i915_driver_unload(struct drm_device *dev); - static void i915_pci_remove(struct pci_dev *pdev) { struct drm_device *dev = pci_get_drvdata(pdev); @@ -473,8 +468,6 @@ static void i915_pci_remove(struct pci_dev *pdev) drm_dev_unref(dev); } -extern const struct dev_pm_ops i915_pm_ops; - static struct pci_driver i915_pci_driver = { .name = DRIVER_NAME, .id_table = pciidlist, From 7a0e17bd5d5a20784431df24601bfafec9d8ec61 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Tue, 4 Oct 2016 12:54:12 +0300 Subject: [PATCH 165/792] drm/i915: workaround sparse warning on variable length arrays Fix sparse warning: drivers/gpu/drm/i915/intel_device_info.c:195:31: warning: Variable length array is used. In truth the array does have constant length, but sparse is too dumb to realize. This is a bit ugly, but silence the warning no matter what. Fixes: 91bedd34abf0 ("drm/i915/bdw: Check for slice, subslice and EU count for BDW") Reviewed-by: Joonas Lahtinen Signed-off-by: Jani Nikula Link: http://patchwork.freedesktop.org/patch/msgid/1475574853-4178-1-git-send-email-jani.nikula@intel.com (cherry picked from commit ff64aa1e630087381511c4d25de0657824f40efa) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_device_info.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_device_info.c b/drivers/gpu/drm/i915/intel_device_info.c index 73b6858600ac..1b20e160bc1f 100644 --- a/drivers/gpu/drm/i915/intel_device_info.c +++ b/drivers/gpu/drm/i915/intel_device_info.c @@ -192,7 +192,7 @@ static void broadwell_sseu_info_init(struct drm_i915_private *dev_priv) struct sseu_dev_info *sseu = &mkwrite_device_info(dev_priv)->sseu; const int s_max = 3, ss_max = 3, eu_max = 8; int s, ss; - u32 fuse2, eu_disable[s_max]; + u32 fuse2, eu_disable[3]; /* s_max */ fuse2 = I915_READ(GEN8_FUSE2); sseu->slice_mask = (fuse2 & GEN8_F2_S_ENA_MASK) >> GEN8_F2_S_ENA_SHIFT; From 01c72d6c17dc524f04d4dbe361d214e423b35457 Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Tue, 4 Oct 2016 14:37:32 -0300 Subject: [PATCH 166/792] drm/i915/gen9: fix DDB partitioning for multi-screen cases With the previous code we were only recomputing the DDB partitioning for the CRTCs included in the atomic commit, so any other active CRTCs would end up having their DDB registers zeroed. In this patch we make sure that the computed state starts as a copy of the current partitioning, and then we only zero the DDBs that we're actually going to recompute. How to reproduce the bug: 1 - Enable the primary plane on pipe A 2 - Enable the primary plane on pipe B 3 - Enable the cursor or sprite plane on pipe A Step 3 will zero the DDB partitioning for pipe B since it's not included in the commit that enabled the cursor or sprite for pipe A. I expect this to fix many FIFO underrun problems on gen9+. v2: - Mention the cursor on the steps to reproduce the problem (Paulo). - Add Testcase tag provided by Maarten (Maarten). Testcase: kms_cursor_legacy.cursorA-vs-flipB-atomic-transitions Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96226 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96828 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97450 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97596 Bugzilla: https://www.phoronix.com/scan.php?page=news_item&px=Intel-Skylake-Multi-Screen-Woes Cc: stable@vger.kernel.org Signed-off-by: Paulo Zanoni Reviewed-by: Lyude Link: http://patchwork.freedesktop.org/patch/msgid/1475602652-17326-1-git-send-email-paulo.r.zanoni@intel.com (cherry picked from commit 5a920b85f2c6e3fd7d9dd9bb3f3345e9085e2360) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_pm.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index a2f751cd187a..1a11ab87ec5d 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -3362,13 +3362,15 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *cstate, int num_active; int id, i; + /* Clear the partitioning for disabled planes. */ + memset(ddb->plane[pipe], 0, sizeof(ddb->plane[pipe])); + memset(ddb->y_plane[pipe], 0, sizeof(ddb->y_plane[pipe])); + if (WARN_ON(!state)) return 0; if (!cstate->base.active) { ddb->pipe[pipe].start = ddb->pipe[pipe].end = 0; - memset(ddb->plane[pipe], 0, sizeof(ddb->plane[pipe])); - memset(ddb->y_plane[pipe], 0, sizeof(ddb->y_plane[pipe])); return 0; } @@ -4050,6 +4052,12 @@ skl_compute_ddb(struct drm_atomic_state *state) intel_state->wm_results.dirty_pipes = ~0; } + /* + * We're not recomputing for the pipes not included in the commit, so + * make sure we start with the current state. + */ + memcpy(ddb, &dev_priv->wm.skl_hw.ddb, sizeof(*ddb)); + for_each_intel_crtc_mask(dev, intel_crtc, realloc_pipes) { struct intel_crtc_state *cstate; From 47ed32483e1f1fc391c78466f5fd66f03078e9e4 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 12 Oct 2016 12:48:26 +0100 Subject: [PATCH 167/792] drm/i915: Use fence_write() from rpm resume MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit During rpm resume we restore the fences, but we do not have the protection of struct_mutex. This rules out updating the activity tracking on the fences, and requires us to rely on the rpm as the serialisation barrier instead. [ 350.298052] [drm:intel_runtime_resume [i915]] Resuming device [ 350.308606] [ 350.310520] =============================== [ 350.315560] [ INFO: suspicious RCU usage. ] [ 350.320554] 4.8.0-rc8-bsw-rapl+ #3133 Tainted: G U W [ 350.327208] ------------------------------- [ 350.331977] ../drivers/gpu/drm/i915/i915_gem_request.h:371 suspicious rcu_dereference_protected() usage! [ 350.342619] [ 350.342619] other info that might help us debug this: [ 350.342619] [ 350.351593] [ 350.351593] rcu_scheduler_active = 1, debug_locks = 0 [ 350.358952] 3 locks held by Xorg/320: [ 350.363077] #0: (&dev->mode_config.mutex){+.+.+.}, at: [] drm_modeset_lock_all+0x3c/0xd0 [drm] [ 350.375162] #1: (crtc_ww_class_acquire){+.+.+.}, at: [] drm_modeset_lock_all+0x46/0xd0 [drm] [ 350.387022] #2: (crtc_ww_class_mutex){+.+.+.}, at: [] drm_modeset_lock+0x36/0x110 [drm] [ 350.398236] [ 350.398236] stack backtrace: [ 350.403196] CPU: 1 PID: 320 Comm: Xorg Tainted: G U W 4.8.0-rc8-bsw-rapl+ #3133 [ 350.412457] Hardware name: Intel Corporation CHERRYVIEW C0 PLATFORM/Braswell CRB, BIOS BRAS.X64.X088.R00.1510270350 10/27/2015 [ 350.425212] 0000000000000000 ffff8801680a78c8 ffffffff81332187 ffff88016c5c5000 [ 350.433611] 0000000000000001 ffff8801680a78f8 ffffffff810ca6da ffff88016cc8b0f0 [ 350.442012] ffff88016cc80000 ffff88016cc80000 ffff880177ad0000 ffff8801680a7948 [ 350.450409] Call Trace: [ 350.453165] [] dump_stack+0x67/0x90 [ 350.458931] [] lockdep_rcu_suspicious+0xea/0x120 [ 350.466002] [] fence_update+0xbd/0x670 [i915] [ 350.472766] [] i915_gem_restore_fences+0x52/0x70 [i915] [ 350.480496] [] vlv_resume_prepare+0x72/0x570 [i915] [ 350.487839] [] intel_runtime_resume+0x102/0x210 [i915] [ 350.495442] [] pci_pm_runtime_resume+0x7f/0xb0 [ 350.502274] [] ? pci_restore_standard_config+0x40/0x40 [ 350.509883] [] __rpm_callback+0x35/0x70 [ 350.516037] [] ? pci_restore_standard_config+0x40/0x40 [ 350.523646] [] rpm_callback+0x24/0x80 [ 350.529604] [] ? pci_restore_standard_config+0x40/0x40 [ 350.537212] [] rpm_resume+0x4ad/0x740 [ 350.543161] [] __pm_runtime_resume+0x51/0x80 [ 350.549824] [] intel_runtime_pm_get+0x28/0x90 [i915] [ 350.557265] [] intel_display_power_get+0x23/0x50 [i915] [ 350.565001] [] intel_atomic_commit_tail+0xdfd/0x10b0 [i915] [ 350.573106] [] ? drm_atomic_helper_swap_state+0x159/0x300 [drm_kms_helper] [ 350.582659] [] ? _raw_spin_unlock+0x31/0x50 [ 350.589205] [] ? drm_atomic_helper_swap_state+0x159/0x300 [drm_kms_helper] [ 350.598787] [] intel_atomic_commit+0x3b5/0x500 [i915] [ 350.606319] [] ? drm_atomic_set_crtc_for_connector+0xcc/0x100 [drm] [ 350.615209] [] drm_atomic_commit+0x49/0x50 [drm] [ 350.622242] [] drm_atomic_helper_set_config+0x88/0xc0 [drm_kms_helper] [ 350.631419] [] drm_mode_set_config_internal+0x6c/0x120 [drm] [ 350.639623] [] drm_mode_setcrtc+0x22c/0x4d0 [drm] [ 350.646760] [] drm_ioctl+0x209/0x460 [drm] [ 350.653217] [] ? drm_mode_getcrtc+0x150/0x150 [drm] [ 350.660536] [] ? __lock_is_held+0x4a/0x70 [ 350.666885] [] do_vfs_ioctl+0x93/0x6b0 [ 350.672939] [] ? __fget+0x113/0x200 [ 350.678797] [] ? __fget+0x5/0x200 [ 350.684361] [] SyS_ioctl+0x44/0x80 [ 350.690030] [] do_syscall_64+0x5b/0x120 [ 350.696184] [] entry_SYSCALL64_slow_path+0x25/0x25 Note we also have to remember the lesson from commit 4fc788f5ee3d ("drm/i915: Flush delayed fence releases after reset") where we have to flush any changes to the fence on restore. v2: Replace call to release user mmaps with an assertion that they have already been zapped. Fixes: 49ef5294cda2 ("drm/i915: Move fence tracking from object to vma") Reported-by: Ville Syrjälä Signed-off-by: Chris Wilson Cc: Ville Syrjälä Cc: Joonas Lahtinen Cc: Mika Kuoppala Reviewed-by: Joonas Lahtinen Link: http://patchwork.freedesktop.org/patch/msgid/20161012114827.17031-1-chris@chris-wilson.co.uk (cherry picked from commit 4676dc838b37ed8c6f3da4571cb4a04cbd604801) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem_fence.c | 23 ++++++++++++++++++++--- 1 file changed, 20 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem_fence.c b/drivers/gpu/drm/i915/i915_gem_fence.c index 8df1fa7234e8..2c7ba0ee127c 100644 --- a/drivers/gpu/drm/i915/i915_gem_fence.c +++ b/drivers/gpu/drm/i915/i915_gem_fence.c @@ -290,6 +290,8 @@ i915_vma_put_fence(struct i915_vma *vma) { struct drm_i915_fence_reg *fence = vma->fence; + assert_rpm_wakelock_held(to_i915(vma->vm->dev)); + if (!fence) return 0; @@ -341,6 +343,8 @@ i915_vma_get_fence(struct i915_vma *vma) struct drm_i915_fence_reg *fence; struct i915_vma *set = i915_gem_object_is_tiled(vma->obj) ? vma : NULL; + assert_rpm_wakelock_held(to_i915(vma->vm->dev)); + /* Just update our place in the LRU if our fence is getting reused. */ if (vma->fence) { fence = vma->fence; @@ -371,6 +375,12 @@ void i915_gem_restore_fences(struct drm_device *dev) struct drm_i915_private *dev_priv = to_i915(dev); int i; + /* Note that this may be called outside of struct_mutex, by + * runtime suspend/resume. The barrier we require is enforced by + * rpm itself - all access to fences/GTT are only within an rpm + * wakeref, and to acquire that wakeref you must pass through here. + */ + for (i = 0; i < dev_priv->num_fence_regs; i++) { struct drm_i915_fence_reg *reg = &dev_priv->fence_regs[i]; struct i915_vma *vma = reg->vma; @@ -379,10 +389,17 @@ void i915_gem_restore_fences(struct drm_device *dev) * Commit delayed tiling changes if we have an object still * attached to the fence, otherwise just clear the fence. */ - if (vma && !i915_gem_object_is_tiled(vma->obj)) - vma = NULL; + if (vma && !i915_gem_object_is_tiled(vma->obj)) { + GEM_BUG_ON(!reg->dirty); + GEM_BUG_ON(vma->obj->fault_mappable); - fence_update(reg, vma); + list_move(®->link, &dev_priv->mm.fence_list); + vma->fence = NULL; + vma = NULL; + } + + fence_write(reg, vma); + reg->vma = vma; } } From be4dd651ff79b9fddc46ef330afeedc6560fd1ca Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 13 Oct 2016 11:55:08 +0300 Subject: [PATCH 168/792] drm/i915: fix a read size argument We want to read 3 bytes here, but because the parenthesis are in the wrong place we instead read: sizeof(intel_dp->edp_dpcd) == sizeof(intel_dp->edp_dpcd) which is one byte. Fixes: fe5a66f91c88 ("drm/i915: Read PSR caps/intermediate freqs/etc. only once on eDP") Reviewed-by: Chris Wilson Cc: Signed-off-by: Dan Carpenter Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/20161013085508.GJ16198@mwanda (cherry picked from commit f7170e2eb8f6bf7ef2032cc0659cd38740bf5b97) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_dp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 14a3cf0b7213..ee8aa95967de 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -3551,8 +3551,8 @@ intel_edp_init_dpcd(struct intel_dp *intel_dp) /* Read the eDP Display control capabilities registers */ if ((intel_dp->dpcd[DP_EDP_CONFIGURATION_CAP] & DP_DPCD_DISPLAY_CONTROL_CAPABLE) && drm_dp_dpcd_read(&intel_dp->aux, DP_EDP_DPCD_REV, - intel_dp->edp_dpcd, sizeof(intel_dp->edp_dpcd) == - sizeof(intel_dp->edp_dpcd))) + intel_dp->edp_dpcd, sizeof(intel_dp->edp_dpcd)) == + sizeof(intel_dp->edp_dpcd)) DRM_DEBUG_KMS("EDP DPCD : %*ph\n", (int) sizeof(intel_dp->edp_dpcd), intel_dp->edp_dpcd); From fd58753ead86ee289ea89fe26e1842f36e54b36c Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Thu, 13 Oct 2016 14:34:06 +0300 Subject: [PATCH 169/792] drm/i915: Fix mismatched INIT power domain disabling during suspend MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently the display INIT power domain disabling/enabling happens in a mismatched way in the suspend/resume_early hooks respectively. This can leave display power wells incorrectly disabled in the resume hook if the suspend sequence is aborted for some reason resulting in the suspend/resume hooks getting called but the suspend_late/resume_early hooks being skipped. In particular this change fixes "Unclaimed read from register 0x1e1204" on BYT/BSW triggered from i915_drm_resume()-> intel_pps_unlock_regs_wa() when suspending with /sys/power/pm_test set to devices. Fixes: 85e90679335f ("drm/i915: disable power wells on suspend") Cc: Ville Syrjälä Cc: David Weinehall Signed-off-by: Imre Deak Reviewed-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1476358446-11621-1-git-send-email-imre.deak@intel.com (cherry picked from commit 4c494a5769cd0de92638b25960ba0158c36088a6) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_drv.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index bfb2efd8d4d4..18dfdd5c1b3b 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -1447,8 +1447,6 @@ static int i915_drm_suspend(struct drm_device *dev) dev_priv->suspend_count++; - intel_display_set_init_power(dev_priv, false); - intel_csr_ucode_suspend(dev_priv); out: @@ -1466,6 +1464,8 @@ static int i915_drm_suspend_late(struct drm_device *dev, bool hibernation) disable_rpm_wakeref_asserts(dev_priv); + intel_display_set_init_power(dev_priv, false); + fw_csr = !IS_BROXTON(dev_priv) && suspend_to_idle(dev_priv) && dev_priv->csr.dmc_payload; /* From 5e33791e1f27c3207e7b44071e7c94a487d1eb39 Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Fri, 7 Oct 2016 17:28:57 -0300 Subject: [PATCH 170/792] drm/i915/gen9: fix watermarks when using the pipe scaler Luckily, the necessary adjustments for when we're using the scaler are exactly the same as the ones needed on ILK+, so just reuse the function we already have. v2: Invert the patch order so stable backports get easier. Cc: stable@vger.kernel.org Signed-off-by: Paulo Zanoni Reviewed-by: Matt Roper Link: http://patchwork.freedesktop.org/patch/msgid/1475872138-16194-1-git-send-email-paulo.r.zanoni@intel.com (cherry picked from commit cfd7e3a20251b9ac95651d64556f87f86128a966) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_pm.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 1a11ab87ec5d..db24f898853c 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -3470,12 +3470,6 @@ skl_allocate_pipe_ddb(struct intel_crtc_state *cstate, return 0; } -static uint32_t skl_pipe_pixel_rate(const struct intel_crtc_state *config) -{ - /* TODO: Take into account the scalers once we support them */ - return config->base.adjusted_mode.crtc_clock; -} - /* * The max latency should be 257 (max the punit can code is 255 and we add 2us * for the read latency) and cpp should always be <= 8, so that @@ -3526,7 +3520,7 @@ static uint32_t skl_adjusted_plane_pixel_rate(const struct intel_crtc_state *cst * Adjusted plane pixel rate is just the pipe's adjusted pixel rate * with additional adjustments for plane-specific scaling. */ - adjusted_pixel_rate = skl_pipe_pixel_rate(cstate); + adjusted_pixel_rate = ilk_pipe_pixel_rate(cstate); downscale_amount = skl_plane_downscale_amount(pstate); pixel_rate = adjusted_pixel_rate * downscale_amount >> 16; @@ -3738,11 +3732,11 @@ skl_compute_linetime_wm(struct intel_crtc_state *cstate) if (!cstate->base.active) return 0; - if (WARN_ON(skl_pipe_pixel_rate(cstate) == 0)) + if (WARN_ON(ilk_pipe_pixel_rate(cstate) == 0)) return 0; return DIV_ROUND_UP(8 * cstate->base.adjusted_mode.crtc_htotal * 1000, - skl_pipe_pixel_rate(cstate)); + ilk_pipe_pixel_rate(cstate)); } static void skl_compute_transition_wm(struct intel_crtc_state *cstate, From 198c5ee3c60169f8b64bcd330a34593be80699aa Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Tue, 11 Oct 2016 20:52:45 +0300 Subject: [PATCH 171/792] drm/i915: Respect alternate_aux_channel for all DDI ports MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The VBT provides the platform a way to mix and match the DDI ports vs. AUX channels. Currently we only trust the VBT for DDI E, which has no corresponding AUX channel of its own. However it is possible that some board might use some non-standard DDI vs. AUX port routing even for the other ports. Perhaps for signal routing reasons or something, So let's generalize this and trust the VBT for all ports. For now we'll limit this to DDI platforms, as we trust the VBT a bit more there anyway when it comes to the DDI ports. I've structured the code in a way that would allow us to easily expand this to other platforms as well, by simply filling in the ddi_port_info. v2: Drop whitespace changes, keep MISSING_CASE() for unknown aux ch assignment, include a commit message, include debug message during init Cc: stable@vger.kernel.org Cc: Maarten Maathuis Tested-by: Maarten Maathuis References: https://bugs.freedesktop.org/show_bug.cgi?id=97877 Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1476208368-5710-2-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Jim Bride (cherry picked from commit 8f7ce038f1178057733b7e765bf9160a2f9be14b) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_dp.c | 71 +++++++++++++++++++-------------- 1 file changed, 40 insertions(+), 31 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index ee8aa95967de..3581b5a7f716 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1108,6 +1108,44 @@ intel_dp_aux_transfer(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg) return ret; } +static enum port intel_aux_port(struct drm_i915_private *dev_priv, + enum port port) +{ + const struct ddi_vbt_port_info *info = + &dev_priv->vbt.ddi_port_info[port]; + enum port aux_port; + + if (!info->alternate_aux_channel) { + DRM_DEBUG_KMS("using AUX %c for port %c (platform default)\n", + port_name(port), port_name(port)); + return port; + } + + switch (info->alternate_aux_channel) { + case DP_AUX_A: + aux_port = PORT_A; + break; + case DP_AUX_B: + aux_port = PORT_B; + break; + case DP_AUX_C: + aux_port = PORT_C; + break; + case DP_AUX_D: + aux_port = PORT_D; + break; + default: + MISSING_CASE(info->alternate_aux_channel); + aux_port = PORT_A; + break; + } + + DRM_DEBUG_KMS("using AUX %c for port %c (VBT)\n", + port_name(aux_port), port_name(port)); + + return aux_port; +} + static i915_reg_t g4x_aux_ctl_reg(struct drm_i915_private *dev_priv, enum port port) { @@ -1168,36 +1206,9 @@ static i915_reg_t ilk_aux_data_reg(struct drm_i915_private *dev_priv, } } -/* - * On SKL we don't have Aux for port E so we rely - * on VBT to set a proper alternate aux channel. - */ -static enum port skl_porte_aux_port(struct drm_i915_private *dev_priv) -{ - const struct ddi_vbt_port_info *info = - &dev_priv->vbt.ddi_port_info[PORT_E]; - - switch (info->alternate_aux_channel) { - case DP_AUX_A: - return PORT_A; - case DP_AUX_B: - return PORT_B; - case DP_AUX_C: - return PORT_C; - case DP_AUX_D: - return PORT_D; - default: - MISSING_CASE(info->alternate_aux_channel); - return PORT_A; - } -} - static i915_reg_t skl_aux_ctl_reg(struct drm_i915_private *dev_priv, enum port port) { - if (port == PORT_E) - port = skl_porte_aux_port(dev_priv); - switch (port) { case PORT_A: case PORT_B: @@ -1213,9 +1224,6 @@ static i915_reg_t skl_aux_ctl_reg(struct drm_i915_private *dev_priv, static i915_reg_t skl_aux_data_reg(struct drm_i915_private *dev_priv, enum port port, int index) { - if (port == PORT_E) - port = skl_porte_aux_port(dev_priv); - switch (port) { case PORT_A: case PORT_B: @@ -1253,7 +1261,8 @@ static i915_reg_t intel_aux_data_reg(struct drm_i915_private *dev_priv, static void intel_aux_reg_init(struct intel_dp *intel_dp) { struct drm_i915_private *dev_priv = to_i915(intel_dp_to_dev(intel_dp)); - enum port port = dp_to_dig_port(intel_dp)->port; + enum port port = intel_aux_port(dev_priv, + dp_to_dig_port(intel_dp)->port); int i; intel_dp->aux_ch_ctl_reg = intel_aux_ctl_reg(dev_priv, port); From 0ce140d45a8398b501934ac289aef0eb7f47c596 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Tue, 11 Oct 2016 20:52:47 +0300 Subject: [PATCH 172/792] drm/i915: Clean up DDI DDC/AUX CH sanitation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Now that we use the AUX and GMBUS assignment from VBT for all ports, let's clean up the sanitization of the port information a bit. Previosuly we only did this for port E, and only complained about a non-standard assignment for the other ports. But as we know that non-standard assignments are a fact of life, let's expand the sanitization to all the ports. v2: Include a commit message, fix up the comments a bit v3: Don't clobber other ports if the current port has no alternate aux ch/ddc pin Cc: stable@vger.kernel.org Cc: Maarten Maathuis Tested-by: Maarten Maathuis References: https://bugs.freedesktop.org/show_bug.cgi?id=97877 Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1476208368-5710-4-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Jim Bride (v2) (cherry picked from commit 9454fa871edf15c20a0371548b3ec0d6d944a498) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_bios.c | 122 +++++++++++++++++++----------- 1 file changed, 77 insertions(+), 45 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c index c6e69e4cfa83..1f8af87c6294 100644 --- a/drivers/gpu/drm/i915/intel_bios.c +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -1031,6 +1031,77 @@ static u8 translate_iboost(u8 val) return mapping[val]; } +static void sanitize_ddc_pin(struct drm_i915_private *dev_priv, + enum port port) +{ + const struct ddi_vbt_port_info *info = + &dev_priv->vbt.ddi_port_info[port]; + enum port p; + + if (!info->alternate_ddc_pin) + return; + + for_each_port_masked(p, (1 << port) - 1) { + struct ddi_vbt_port_info *i = &dev_priv->vbt.ddi_port_info[p]; + + if (info->alternate_ddc_pin != i->alternate_ddc_pin) + continue; + + DRM_DEBUG_KMS("port %c trying to use the same DDC pin (0x%x) as port %c, " + "disabling port %c DVI/HDMI support\n", + port_name(p), i->alternate_ddc_pin, + port_name(port), port_name(p)); + + /* + * If we have multiple ports supposedly sharing the + * pin, then dvi/hdmi couldn't exist on the shared + * port. Otherwise they share the same ddc bin and + * system couldn't communicate with them separately. + * + * Due to parsing the ports in alphabetical order, + * a higher port will always clobber a lower one. + */ + i->supports_dvi = false; + i->supports_hdmi = false; + i->alternate_ddc_pin = 0; + } +} + +static void sanitize_aux_ch(struct drm_i915_private *dev_priv, + enum port port) +{ + const struct ddi_vbt_port_info *info = + &dev_priv->vbt.ddi_port_info[port]; + enum port p; + + if (!info->alternate_aux_channel) + return; + + for_each_port_masked(p, (1 << port) - 1) { + struct ddi_vbt_port_info *i = &dev_priv->vbt.ddi_port_info[p]; + + if (info->alternate_aux_channel != i->alternate_aux_channel) + continue; + + DRM_DEBUG_KMS("port %c trying to use the same AUX CH (0x%x) as port %c, " + "disabling port %c DP support\n", + port_name(p), i->alternate_aux_channel, + port_name(port), port_name(p)); + + /* + * If we have multiple ports supposedlt sharing the + * aux channel, then DP couldn't exist on the shared + * port. Otherwise they share the same aux channel + * and system couldn't communicate with them separately. + * + * Due to parsing the ports in alphabetical order, + * a higher port will always clobber a lower one. + */ + i->supports_dp = false; + i->alternate_aux_channel = 0; + } +} + static void parse_ddi_port(struct drm_i915_private *dev_priv, enum port port, const struct bdb_header *bdb) { @@ -1105,54 +1176,15 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv, enum port port, DRM_DEBUG_KMS("Port %c is internal DP\n", port_name(port)); if (is_dvi) { - if (port == PORT_E) { - info->alternate_ddc_pin = ddc_pin; - /* if DDIE share ddc pin with other port, then - * dvi/hdmi couldn't exist on the shared port. - * Otherwise they share the same ddc bin and system - * couldn't communicate with them seperately. */ - if (ddc_pin == DDC_PIN_B) { - dev_priv->vbt.ddi_port_info[PORT_B].supports_dvi = 0; - dev_priv->vbt.ddi_port_info[PORT_B].supports_hdmi = 0; - } else if (ddc_pin == DDC_PIN_C) { - dev_priv->vbt.ddi_port_info[PORT_C].supports_dvi = 0; - dev_priv->vbt.ddi_port_info[PORT_C].supports_hdmi = 0; - } else if (ddc_pin == DDC_PIN_D) { - dev_priv->vbt.ddi_port_info[PORT_D].supports_dvi = 0; - dev_priv->vbt.ddi_port_info[PORT_D].supports_hdmi = 0; - } - } else if (ddc_pin == DDC_PIN_B && port != PORT_B) - DRM_DEBUG_KMS("Unexpected DDC pin for port B\n"); - else if (ddc_pin == DDC_PIN_C && port != PORT_C) - DRM_DEBUG_KMS("Unexpected DDC pin for port C\n"); - else if (ddc_pin == DDC_PIN_D && port != PORT_D) - DRM_DEBUG_KMS("Unexpected DDC pin for port D\n"); + info->alternate_ddc_pin = ddc_pin; + + sanitize_ddc_pin(dev_priv, port); } if (is_dp) { - if (port == PORT_E) { - info->alternate_aux_channel = aux_channel; - /* if DDIE share aux channel with other port, then - * DP couldn't exist on the shared port. Otherwise - * they share the same aux channel and system - * couldn't communicate with them seperately. */ - if (aux_channel == DP_AUX_A) - dev_priv->vbt.ddi_port_info[PORT_A].supports_dp = 0; - else if (aux_channel == DP_AUX_B) - dev_priv->vbt.ddi_port_info[PORT_B].supports_dp = 0; - else if (aux_channel == DP_AUX_C) - dev_priv->vbt.ddi_port_info[PORT_C].supports_dp = 0; - else if (aux_channel == DP_AUX_D) - dev_priv->vbt.ddi_port_info[PORT_D].supports_dp = 0; - } - else if (aux_channel == DP_AUX_A && port != PORT_A) - DRM_DEBUG_KMS("Unexpected AUX channel for port A\n"); - else if (aux_channel == DP_AUX_B && port != PORT_B) - DRM_DEBUG_KMS("Unexpected AUX channel for port B\n"); - else if (aux_channel == DP_AUX_C && port != PORT_C) - DRM_DEBUG_KMS("Unexpected AUX channel for port C\n"); - else if (aux_channel == DP_AUX_D && port != PORT_D) - DRM_DEBUG_KMS("Unexpected AUX channel for port D\n"); + info->alternate_aux_channel = aux_channel; + + sanitize_aux_ch(dev_priv, port); } if (bdb->version >= 158) { From 1fb3672eaf6ec95fb34c22734feffd6041531c5b Mon Sep 17 00:00:00 2001 From: Daniel Stone Date: Fri, 21 Oct 2016 15:44:54 +0100 Subject: [PATCH 173/792] drm: i915: Wait for fences on new fb, not old The previous code would wait for fences on the framebuffer from the old plane state to complete, rather than the new, so you would see tearing everywhere. Fix this to wait on the new state before we make it active. Signed-off-by: Daniel Stone Fixes: 94f050246b42 ("drm/i915: nonblocking commit") Cc: stable@vger.kernel.org Cc: Daniel Vetter Cc: Maarten Lankhorst Signed-off-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/20161021144454.6288-1-daniels@collabora.com (cherry picked from commit 2d2c5ad83f772d7d7b0bb8348ecea42e88f89ab0) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_display.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index fbcfed63a76e..319191e6988c 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -14310,7 +14310,7 @@ static void intel_atomic_commit_tail(struct drm_atomic_state *state) for_each_plane_in_state(state, plane, plane_state, i) { struct intel_plane_state *intel_plane_state = - to_intel_plane_state(plane_state); + to_intel_plane_state(plane->state); if (!intel_plane_state->wait_req) continue; From e3b9e6e3a989904ae062e7a48a9431edc837ea6b Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Fri, 21 Oct 2016 13:55:45 -0200 Subject: [PATCH 174/792] drm/i915/fbc: fix CFB size calculation for gen8+ MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Broadwell and newer actually compress up to 2560 lines instead of 2048 (as documented in the FBC_CTL page). If we don't take this into consideration we end up reserving too little stolen memory for the CFB, so we may allocate something else (such as a ring) right after what we reserved, and the hardware will overwrite it with the contents of the CFB when FBC is active, causing GPU hangs. Another possibility is that the CFB may be allocated at the very end of the available space, so the CFB will overlap the reserved stolen area, leading to FIFO underruns. This bug has always been a problem on BDW (the only affected platform where FBC is enabled by default), but it's much easier to reproduce since the following commit: commit c58b735fc762e891481e92af7124b85cb0a51fce Author: Chris Wilson Date: Thu Aug 18 17:16:57 2016 +0100 drm/i915: Allocate rings from stolen Of course, you can only reproduce the bug if your screen is taller than 2048 lines. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98213 Fixes: a98ee79317b4 ("drm/i915/fbc: enable FBC by default on HSW and BDW") Cc: # v4.6+ Signed-off-by: Paulo Zanoni Reviewed-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1477065346-13736-1-git-send-email-paulo.r.zanoni@intel.com (cherry picked from commit 79f2624b1b9f776b173b41d743fb3dd7374b3827) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_fbc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_fbc.c b/drivers/gpu/drm/i915/intel_fbc.c index faa67624e1ed..c43dd9abce79 100644 --- a/drivers/gpu/drm/i915/intel_fbc.c +++ b/drivers/gpu/drm/i915/intel_fbc.c @@ -104,8 +104,10 @@ static int intel_fbc_calculate_cfb_size(struct drm_i915_private *dev_priv, int lines; intel_fbc_get_plane_source_size(cache, NULL, &lines); - if (INTEL_INFO(dev_priv)->gen >= 7) + if (INTEL_GEN(dev_priv) == 7) lines = min(lines, 2048); + else if (INTEL_GEN(dev_priv) >= 8) + lines = min(lines, 2560); /* Hardware needs the full buffer stride, not just the active area. */ return lines * cache->fb.stride; From 6d9deb910c8eee8728129326dc88ec109b03b135 Mon Sep 17 00:00:00 2001 From: Tvrtko Ursulin Date: Tue, 25 Oct 2016 17:40:35 +0100 Subject: [PATCH 175/792] drm/i915: Rotated view does not need a fence We do not need to set up a fence for the rotated view. Display does not need it and no one can access it. v2: Move code to __i915_vma_set_map_and_fenceable. (Chris Wilson) Signed-off-by: Tvrtko Ursulin Fixes: 05a20d098db1 ("drm/i915: Move map-and-fenceable tracking to the VMA") Cc: Chris Wilson Cc: Joonas Lahtinen Reviewed-by: Chris Wilson (cherry picked from commit 07ee2bce6a516e0218dba22581803cb8f11bcf82) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 947e82c2b175..e1053c4949f4 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3745,7 +3745,12 @@ void __i915_vma_set_map_and_fenceable(struct i915_vma *vma) mappable = (vma->node.start + fence_size <= dev_priv->ggtt.mappable_end); - if (mappable && fenceable) + /* + * Explicitly disable for rotated VMA since the display does not + * need the fence and the VMA is not accessible to other users. + */ + if (mappable && fenceable && + vma->ggtt_view.type != I915_GGTT_VIEW_ROTATED) vma->flags |= I915_VMA_CAN_FENCE; else vma->flags &= ~I915_VMA_CAN_FENCE; From 7e9b3f95d64165f37c6448fe624d835c5adf17b9 Mon Sep 17 00:00:00 2001 From: Tvrtko Ursulin Date: Tue, 25 Oct 2016 17:41:12 +0100 Subject: [PATCH 176/792] drm/i915: Remove two invalid warns MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Objects can have multiple VMAs used for display in which case assertion that objects must not be pinned for display more times than the current VMA is incorrect. v2: Commit message update. (Chris Wilson) Signed-off-by: Tvrtko Ursulin Fixes: 058d88c4330f ("drm/i915: Track pinned VMA") Cc: Chris Wilson Cc: Joonas Lahtinen Cc: Ville Syrjälä Reviewed-by: Chris Wilson Link: http://patchwork.freedesktop.org/patch/msgid/1477413635-3876-1-git-send-email-tvrtko.ursulin@linux.intel.com (cherry picked from commit 3299e7e43484a85eeb5c7ec09958bff05c9d0543) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index e1053c4949f4..23960de81b57 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3550,8 +3550,6 @@ i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj, vma->display_alignment = max_t(u64, vma->display_alignment, alignment); - WARN_ON(obj->pin_display > i915_vma_pin_count(vma)); - i915_gem_object_flush_cpu_write_domain(obj); old_write_domain = obj->base.write_domain; @@ -3588,7 +3586,6 @@ i915_gem_object_unpin_from_display_plane(struct i915_vma *vma) list_move_tail(&vma->vm_link, &vma->vm->inactive_list); i915_vma_unpin(vma); - WARN_ON(vma->obj->pin_display > i915_vma_pin_count(vma)); } /** From c89d5454d48e3b6ecae1c9f8bb14b3fac64d9fc8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Mon, 24 Oct 2016 19:13:04 +0300 Subject: [PATCH 177/792] drm/i915: Fix SKL+ 90/270 degree rotated plane coordinate computation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Pass the framebuffer size in .16 fixed point coordinates to drm_rect_rotate() since that's what the source coordinates are as well at this stage. We used to do this part of the computation in integer coordinates, but that got changed when moving the computation to happen in the check phase of the operation. Unfortunately I forgot to shift up the fb width and height appropriately. With the bogus size we ended up with some negative fb offset, which when added to the vma offset caused out scanout to start at an offset earlier than we inteded. Eg. when testing on my SKL I saw a row of incorrect tiles at the top of my screen. Cc: Tvrtko Ursulin Cc: Sivakumar Thulasimani Cc: drm-intel-fixes@lists.freedesktop.org Fixes: b63a16f6cd89 ("drm/i915: Compute display surface offset in the plane check hook for SKL+") Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1477325584-23679-1-git-send-email-ville.syrjala@linux.intel.com Tested-by: Tvrtko Ursulin Reviewed-by: Chris Wilson (cherry picked from commit da064b47c0b8d0dff1905b38c76e7e51fb5a9547) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_display.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 319191e6988c..0ad1879bfd9d 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2978,7 +2978,8 @@ int skl_check_plane_surface(struct intel_plane_state *plane_state) /* Rotate src coordinates to match rotated GTT view */ if (intel_rotation_90_or_270(rotation)) drm_rect_rotate(&plane_state->base.src, - fb->width, fb->height, DRM_ROTATE_270); + fb->width << 16, fb->height << 16, + DRM_ROTATE_270); /* * Handle the AUX surface first since From 7a5857c3c282c12a8bd0cfd2dd4a17a9252c2b4d Mon Sep 17 00:00:00 2001 From: "Sodhi, VunnyX" Date: Fri, 28 Oct 2016 16:59:41 +0530 Subject: [PATCH 178/792] ASoC: Intel: Skylake: Fix to turn off hdmi power on probe failure HDMI codec is required to be powered up before controller initialization for successful enumeration of codec. If the probe fails it needs to be powered off to balance the power state of HDMI codec. This fix balances the reference count in the error path before turning off the codec. Reported-by: Takashi Sakamoto Signed-off-by: Sodhi, VunnyX Signed-off-by: Subhransu S. Prusty Signed-off-by: Mark Brown --- sound/soc/intel/skylake/skl.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c index 7b7a380b1245..3fc30cbe83c1 100644 --- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -674,7 +674,7 @@ static int skl_probe(struct pci_dev *pci, if (skl->nhlt == NULL) { err = -ENODEV; - goto out_free; + goto out_display_power_off; } skl_nhlt_update_topology_bin(skl); @@ -746,6 +746,9 @@ out_mach_free: skl_machine_device_unregister(skl); out_nhlt_free: skl_nhlt_free(skl->nhlt); +out_display_power_off: + if (IS_ENABLED(CONFIG_SND_SOC_HDAC_HDMI)) + snd_hdac_display_power(bus, false); out_free: skl->init_failed = 1; skl_free(ebus); From d64b5bf5b10ad95fd4a2684e1fc39eb7b00d9d0c Mon Sep 17 00:00:00 2001 From: Stephen Barber Date: Thu, 27 Oct 2016 18:02:27 -0700 Subject: [PATCH 179/792] ASoC: da7219: Connect output enable register to DAIOUT da7219 output (for headset capture) should be set to high-impedance when not in use, since it will otherwise interfere with output from other codecs attached to the same DAI. Signed-off-by: Stephen Barber Acked-by: Adam Thomson Signed-off-by: Mark Brown --- sound/soc/codecs/da7219.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/da7219.c b/sound/soc/codecs/da7219.c index 1152aa5e7c39..cf37936bfe3a 100644 --- a/sound/soc/codecs/da7219.c +++ b/sound/soc/codecs/da7219.c @@ -880,7 +880,8 @@ static const struct snd_soc_dapm_widget da7219_dapm_widgets[] = { SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), /* DAI */ - SND_SOC_DAPM_AIF_OUT("DAIOUT", "Capture", 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_OUT("DAIOUT", "Capture", 0, DA7219_DAI_TDM_CTRL, + DA7219_DAI_OE_SHIFT, DA7219_NO_INVERT), SND_SOC_DAPM_AIF_IN("DAIIN", "Playback", 0, SND_SOC_NOPM, 0, 0), /* Output Muxes */ From 73f5dfc68316bef2ab7062ecdefd4b0ca941b4c1 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Thu, 27 Oct 2016 12:34:02 +0200 Subject: [PATCH 180/792] ASoC: samsung: get access to DMA engine early to defer probe properly ASoC Samsung sub-drivers tried to get access to their DMA engine controllers as a last step in driver probe. If a DMA engine was not available yet, samsung_asoc_dma_platform_register() function ended in -EPROBE_DEFER, but the driver already registered its component to ASoC core. This patch moves samsung_asoc_dma_platform_register() call before registering any components, to the common place, where driver was gathering all needed resources. In case of Samsung Exynos i2s driver the issue was even worse. The driver managed already to register its secondary DAI platform device before even getting the DMA engine access. That together with -EPROBE_DEFER error code from samsung_i2s_probe() immediately triggered another round of deferred probe retry and in turn endless loop of driver probing. This patch fixes broken boot on Odroid XU3 and other Exynos5422-based boards. Signed-off-by: Marek Szyprowski Reviewed-by: Javier Martinez Canillas Reviewed-by: Sylwester Nawrocki Signed-off-by: Mark Brown --- sound/soc/samsung/ac97.c | 10 +++++----- sound/soc/samsung/i2s.c | 19 ++++++++++--------- sound/soc/samsung/pcm.c | 21 +++++++++++---------- sound/soc/samsung/s3c2412-i2s.c | 18 +++++++++--------- sound/soc/samsung/s3c24xx-i2s.c | 16 ++++++++-------- sound/soc/samsung/spdif.c | 14 +++++++------- 6 files changed, 50 insertions(+), 48 deletions(-) diff --git a/sound/soc/samsung/ac97.c b/sound/soc/samsung/ac97.c index 97d6700b1009..cbc0023c2bc8 100644 --- a/sound/soc/samsung/ac97.c +++ b/sound/soc/samsung/ac97.c @@ -383,11 +383,6 @@ static int s3c_ac97_probe(struct platform_device *pdev) goto err4; } - ret = devm_snd_soc_register_component(&pdev->dev, &s3c_ac97_component, - s3c_ac97_dai, ARRAY_SIZE(s3c_ac97_dai)); - if (ret) - goto err5; - ret = samsung_asoc_dma_platform_register(&pdev->dev, ac97_pdata->dma_filter, NULL, NULL); @@ -396,6 +391,11 @@ static int s3c_ac97_probe(struct platform_device *pdev) goto err5; } + ret = devm_snd_soc_register_component(&pdev->dev, &s3c_ac97_component, + s3c_ac97_dai, ARRAY_SIZE(s3c_ac97_dai)); + if (ret) + goto err5; + return 0; err5: free_irq(irq_res->start, NULL); diff --git a/sound/soc/samsung/i2s.c b/sound/soc/samsung/i2s.c index 7e32cf4581f8..7825bff45ae3 100644 --- a/sound/soc/samsung/i2s.c +++ b/sound/soc/samsung/i2s.c @@ -1237,14 +1237,14 @@ static int samsung_i2s_probe(struct platform_device *pdev) dev_err(&pdev->dev, "Unable to get drvdata\n"); return -EFAULT; } - ret = devm_snd_soc_register_component(&sec_dai->pdev->dev, - &samsung_i2s_component, - &sec_dai->i2s_dai_drv, 1); + ret = samsung_asoc_dma_platform_register(&pdev->dev, + sec_dai->filter, "tx-sec", NULL); if (ret != 0) return ret; - return samsung_asoc_dma_platform_register(&pdev->dev, - sec_dai->filter, "tx-sec", NULL); + return devm_snd_soc_register_component(&sec_dai->pdev->dev, + &samsung_i2s_component, + &sec_dai->i2s_dai_drv, 1); } pri_dai = i2s_alloc_dai(pdev, false); @@ -1314,6 +1314,11 @@ static int samsung_i2s_probe(struct platform_device *pdev) if (quirks & QUIRK_PRI_6CHAN) pri_dai->i2s_dai_drv.playback.channels_max = 6; + ret = samsung_asoc_dma_platform_register(&pdev->dev, pri_dai->filter, + NULL, NULL); + if (ret < 0) + goto err_disable_clk; + if (quirks & QUIRK_SEC_DAI) { sec_dai = i2s_alloc_dai(pdev, true); if (!sec_dai) { @@ -1353,10 +1358,6 @@ static int samsung_i2s_probe(struct platform_device *pdev) if (ret < 0) goto err_free_dai; - ret = samsung_asoc_dma_platform_register(&pdev->dev, pri_dai->filter, - NULL, NULL); - if (ret < 0) - goto err_free_dai; pm_runtime_enable(&pdev->dev); diff --git a/sound/soc/samsung/pcm.c b/sound/soc/samsung/pcm.c index 43e367a9acc3..c484985812ed 100644 --- a/sound/soc/samsung/pcm.c +++ b/sound/soc/samsung/pcm.c @@ -565,15 +565,6 @@ static int s3c_pcm_dev_probe(struct platform_device *pdev) pcm->dma_capture = &s3c_pcm_stereo_in[pdev->id]; pcm->dma_playback = &s3c_pcm_stereo_out[pdev->id]; - pm_runtime_enable(&pdev->dev); - - ret = devm_snd_soc_register_component(&pdev->dev, &s3c_pcm_component, - &s3c_pcm_dai[pdev->id], 1); - if (ret != 0) { - dev_err(&pdev->dev, "failed to get register DAI: %d\n", ret); - goto err5; - } - ret = samsung_asoc_dma_platform_register(&pdev->dev, filter, NULL, NULL); if (ret) { @@ -581,8 +572,18 @@ static int s3c_pcm_dev_probe(struct platform_device *pdev) goto err5; } - return 0; + pm_runtime_enable(&pdev->dev); + ret = devm_snd_soc_register_component(&pdev->dev, &s3c_pcm_component, + &s3c_pcm_dai[pdev->id], 1); + if (ret != 0) { + dev_err(&pdev->dev, "failed to get register DAI: %d\n", ret); + goto err6; + } + + return 0; +err6: + pm_runtime_disable(&pdev->dev); err5: clk_disable_unprepare(pcm->pclk); err4: diff --git a/sound/soc/samsung/s3c2412-i2s.c b/sound/soc/samsung/s3c2412-i2s.c index 3e89fbc0c51d..0a4718207e6e 100644 --- a/sound/soc/samsung/s3c2412-i2s.c +++ b/sound/soc/samsung/s3c2412-i2s.c @@ -168,19 +168,19 @@ static int s3c2412_iis_dev_probe(struct platform_device *pdev) s3c2412_i2s_pcm_stereo_in.addr = res->start + S3C2412_IISRXD; s3c2412_i2s_pcm_stereo_in.filter_data = pdata->dma_capture; - ret = s3c_i2sv2_register_component(&pdev->dev, -1, - &s3c2412_i2s_component, - &s3c2412_i2s_dai); - if (ret) { - pr_err("failed to register the dai\n"); - return ret; - } - ret = samsung_asoc_dma_platform_register(&pdev->dev, pdata->dma_filter, NULL, NULL); - if (ret) + if (ret) { pr_err("failed to register the DMA: %d\n", ret); + return ret; + } + + ret = s3c_i2sv2_register_component(&pdev->dev, -1, + &s3c2412_i2s_component, + &s3c2412_i2s_dai); + if (ret) + pr_err("failed to register the dai\n"); return ret; } diff --git a/sound/soc/samsung/s3c24xx-i2s.c b/sound/soc/samsung/s3c24xx-i2s.c index c78a936a3099..9052f6a7073e 100644 --- a/sound/soc/samsung/s3c24xx-i2s.c +++ b/sound/soc/samsung/s3c24xx-i2s.c @@ -474,18 +474,18 @@ static int s3c24xx_iis_dev_probe(struct platform_device *pdev) s3c24xx_i2s_pcm_stereo_in.addr = res->start + S3C2410_IISFIFO; s3c24xx_i2s_pcm_stereo_in.filter_data = pdata->dma_capture; - ret = devm_snd_soc_register_component(&pdev->dev, - &s3c24xx_i2s_component, &s3c24xx_i2s_dai, 1); - if (ret) { - pr_err("failed to register the dai\n"); - return ret; - } - ret = samsung_asoc_dma_platform_register(&pdev->dev, pdata->dma_filter, NULL, NULL); - if (ret) + if (ret) { pr_err("failed to register the dma: %d\n", ret); + return ret; + } + + ret = devm_snd_soc_register_component(&pdev->dev, + &s3c24xx_i2s_component, &s3c24xx_i2s_dai, 1); + if (ret) + pr_err("failed to register the dai\n"); return ret; } diff --git a/sound/soc/samsung/spdif.c b/sound/soc/samsung/spdif.c index 26c1fbed4d35..704b7b12bf8b 100644 --- a/sound/soc/samsung/spdif.c +++ b/sound/soc/samsung/spdif.c @@ -416,6 +416,13 @@ static int spdif_probe(struct platform_device *pdev) goto err3; } + ret = samsung_asoc_dma_platform_register(&pdev->dev, filter, + NULL, NULL); + if (ret) { + dev_err(&pdev->dev, "failed to register DMA: %d\n", ret); + goto err4; + } + dev_set_drvdata(&pdev->dev, spdif); ret = devm_snd_soc_register_component(&pdev->dev, @@ -435,13 +442,6 @@ static int spdif_probe(struct platform_device *pdev) spdif->dma_playback = &spdif_stereo_out; - ret = samsung_asoc_dma_platform_register(&pdev->dev, filter, - NULL, NULL); - if (ret) { - dev_err(&pdev->dev, "failed to register DMA: %d\n", ret); - goto err4; - } - return 0; err4: iounmap(spdif->regs); From 340327a62c4a145e098fd6c1116f12062eeec707 Mon Sep 17 00:00:00 2001 From: "Jon Medhurst (Tixy)" Date: Fri, 28 Oct 2016 09:18:24 +0100 Subject: [PATCH 181/792] ASoC: hdmi-codec: Fix hdmi_of_xlate_dai_name when #sound-dai-cells = <0> If a DAI specifies "#sound-dai-cells = <0>" in device-tree then hdmi_of_xlate_dai_name() will be called with zero args, which it isn't implemented to cope with. The resulting use of an uninitialised variable for the id will usually result in an error like: asoc-simple-card sound: parse error -11 asoc-simple-card: probe of sound failed with error -11 Fix this by using and id of zero if no arg is provided. Fixes: 9731f82d6016 ("ASoC: hdmi-codec: enable multi probe for same device") Signed-off-by: Jon Medhurst Signed-off-by: Mark Brown --- sound/soc/codecs/hdmi-codec.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/hdmi-codec.c b/sound/soc/codecs/hdmi-codec.c index b904492d7744..90b5948e0ff3 100644 --- a/sound/soc/codecs/hdmi-codec.c +++ b/sound/soc/codecs/hdmi-codec.c @@ -364,7 +364,12 @@ static int hdmi_of_xlate_dai_name(struct snd_soc_component *component, struct of_phandle_args *args, const char **dai_name) { - int id = args->args[0]; + int id; + + if (args->args_count) + id = args->args[0]; + else + id = 0; if (id < ARRAY_SIZE(hdmi_dai_name)) { *dai_name = hdmi_dai_name[id]; From 06b113e9f28f8657715919087a3f54b77d1634ed Mon Sep 17 00:00:00 2001 From: Laura Abbott Date: Fri, 28 Oct 2016 09:59:38 -0700 Subject: [PATCH 182/792] clk: xgene: Don't call __pa on ioremaped address ioremaped addresses are not linearly mapped so the physical address can not be figured out via __pa. More generally, there is no guarantee that backing value of an ioremapped address is a physical address at all. The value here is only used for debugging so just drop the call to __pa on the ioremapped address. Fixes: 6ae5fd381251 ("clk: xgene: Silence sparse warnings") Signed-off-by: Laura Abbott Acked-by: Loc Ho Signed-off-by: Stephen Boyd --- drivers/clk/clk-xgene.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/clk/clk-xgene.c b/drivers/clk/clk-xgene.c index 5daddf5ecc4b..bc37030e38ba 100644 --- a/drivers/clk/clk-xgene.c +++ b/drivers/clk/clk-xgene.c @@ -463,22 +463,20 @@ static int xgene_clk_enable(struct clk_hw *hw) struct xgene_clk *pclk = to_xgene_clk(hw); unsigned long flags = 0; u32 data; - phys_addr_t reg; if (pclk->lock) spin_lock_irqsave(pclk->lock, flags); if (pclk->param.csr_reg != NULL) { pr_debug("%s clock enabled\n", clk_hw_get_name(hw)); - reg = __pa(pclk->param.csr_reg); /* First enable the clock */ data = xgene_clk_read(pclk->param.csr_reg + pclk->param.reg_clk_offset); data |= pclk->param.reg_clk_mask; xgene_clk_write(data, pclk->param.csr_reg + pclk->param.reg_clk_offset); - pr_debug("%s clock PADDR base %pa clk offset 0x%08X mask 0x%08X value 0x%08X\n", - clk_hw_get_name(hw), ®, + pr_debug("%s clk offset 0x%08X mask 0x%08X value 0x%08X\n", + clk_hw_get_name(hw), pclk->param.reg_clk_offset, pclk->param.reg_clk_mask, data); @@ -488,8 +486,8 @@ static int xgene_clk_enable(struct clk_hw *hw) data &= ~pclk->param.reg_csr_mask; xgene_clk_write(data, pclk->param.csr_reg + pclk->param.reg_csr_offset); - pr_debug("%s CSR RESET PADDR base %pa csr offset 0x%08X mask 0x%08X value 0x%08X\n", - clk_hw_get_name(hw), ®, + pr_debug("%s csr offset 0x%08X mask 0x%08X value 0x%08X\n", + clk_hw_get_name(hw), pclk->param.reg_csr_offset, pclk->param.reg_csr_mask, data); } From 646cccb55b26b95b981ea9a63512260d0c21cac3 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 26 Oct 2016 16:41:39 -0400 Subject: [PATCH 183/792] drm/amdgpu: add support for new smc firmware on tonga Newer tonga parts require new smc firmware. Reviewed-by: Huang Rui Reviewed-by: Eric Huang Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c | 6 +++++- drivers/gpu/drm/amd/amdgpu/vi.c | 1 + 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c index 7a8bfa34682f..d1267ea1d631 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c @@ -798,7 +798,11 @@ static int amdgpu_cgs_get_firmware_info(struct cgs_device *cgs_device, strcpy(fw_name, "amdgpu/topaz_smc.bin"); break; case CHIP_TONGA: - strcpy(fw_name, "amdgpu/tonga_smc.bin"); + if (((adev->pdev->device == 0x6939) && (adev->pdev->revision == 0xf1)) || + ((adev->pdev->device == 0x6938) && (adev->pdev->revision == 0xf1))) + strcpy(fw_name, "amdgpu/tonga_k_smc.bin"); + else + strcpy(fw_name, "amdgpu/tonga_smc.bin"); break; case CHIP_FIJI: strcpy(fw_name, "amdgpu/fiji_smc.bin"); diff --git a/drivers/gpu/drm/amd/amdgpu/vi.c b/drivers/gpu/drm/amd/amdgpu/vi.c index 7c13090df7c0..12404fc47520 100644 --- a/drivers/gpu/drm/amd/amdgpu/vi.c +++ b/drivers/gpu/drm/amd/amdgpu/vi.c @@ -81,6 +81,7 @@ MODULE_FIRMWARE("amdgpu/topaz_smc.bin"); MODULE_FIRMWARE("amdgpu/tonga_smc.bin"); +MODULE_FIRMWARE("amdgpu/tonga_k_smc.bin"); MODULE_FIRMWARE("amdgpu/fiji_smc.bin"); MODULE_FIRMWARE("amdgpu/polaris10_smc.bin"); MODULE_FIRMWARE("amdgpu/polaris10_smc_sk.bin"); From 3b496626ee8f07919256a4e99cddf42ecd4ba891 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 27 Oct 2016 18:33:00 -0400 Subject: [PATCH 184/792] drm/amdgpu: add support for new smc firmware on iceland Newer iceland parts require new smc firmware. Reviewed-by: Huang Rui Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c | 7 ++++++- drivers/gpu/drm/amd/amdgpu/vi.c | 1 + 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c index d1267ea1d631..662976292535 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cgs.c @@ -795,7 +795,12 @@ static int amdgpu_cgs_get_firmware_info(struct cgs_device *cgs_device, if (!adev->pm.fw) { switch (adev->asic_type) { case CHIP_TOPAZ: - strcpy(fw_name, "amdgpu/topaz_smc.bin"); + if (((adev->pdev->device == 0x6900) && (adev->pdev->revision == 0x81)) || + ((adev->pdev->device == 0x6900) && (adev->pdev->revision == 0x83)) || + ((adev->pdev->device == 0x6907) && (adev->pdev->revision == 0x87))) + strcpy(fw_name, "amdgpu/topaz_k_smc.bin"); + else + strcpy(fw_name, "amdgpu/topaz_smc.bin"); break; case CHIP_TONGA: if (((adev->pdev->device == 0x6939) && (adev->pdev->revision == 0xf1)) || diff --git a/drivers/gpu/drm/amd/amdgpu/vi.c b/drivers/gpu/drm/amd/amdgpu/vi.c index 12404fc47520..f62f1a74f890 100644 --- a/drivers/gpu/drm/amd/amdgpu/vi.c +++ b/drivers/gpu/drm/amd/amdgpu/vi.c @@ -80,6 +80,7 @@ #include "dce_virtual.h" MODULE_FIRMWARE("amdgpu/topaz_smc.bin"); +MODULE_FIRMWARE("amdgpu/topaz_k_smc.bin"); MODULE_FIRMWARE("amdgpu/tonga_smc.bin"); MODULE_FIRMWARE("amdgpu/tonga_k_smc.bin"); MODULE_FIRMWARE("amdgpu/fiji_smc.bin"); From 18e601d6adae5042f82d105ccd3d4498050f2ebf Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Mon, 24 Oct 2016 20:33:23 -0400 Subject: [PATCH 185/792] sunrpc: fix some missing rq_rbuffer assignments We've been seeing some crashes in testing that look like this: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] memcpy_orig+0x29/0x110 PGD 212ca2067 PUD 212ca3067 PMD 0 Oops: 0002 [#1] SMP Modules linked in: rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache ppdev parport_pc i2c_piix4 sg parport i2c_core virtio_balloon pcspkr acpi_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c sd_mod ata_generic pata_acpi virtio_scsi 8139too ata_piix libata 8139cp mii virtio_pci floppy virtio_ring serio_raw virtio CPU: 1 PID: 1540 Comm: nfsd Not tainted 4.9.0-rc1 #39 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2007 task: ffff88020d7ed200 task.stack: ffff880211838000 RIP: 0010:[] [] memcpy_orig+0x29/0x110 RSP: 0018:ffff88021183bdd0 EFLAGS: 00010206 RAX: 0000000000000000 RBX: ffff88020d7fa000 RCX: 000000f400000000 RDX: 0000000000000014 RSI: ffff880212927020 RDI: 0000000000000000 RBP: ffff88021183be30 R08: 01000000ef896996 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff880211704ca8 R13: ffff88021473f000 R14: 00000000ef896996 R15: ffff880211704800 FS: 0000000000000000(0000) GS:ffff88021fc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000212ca1000 CR4: 00000000000006e0 Stack: ffffffffa01ea087 ffffffff63400001 ffff880215145e00 ffff880211bacd00 ffff88021473f2b8 0000000000000004 00000000d0679d67 ffff880211bacd00 ffff88020d7fa000 ffff88021473f000 0000000000000000 ffff88020d7faa30 Call Trace: [] ? svc_tcp_recvfrom+0x5a7/0x790 [sunrpc] [] svc_recv+0xad8/0xbd0 [sunrpc] [] nfsd+0xde/0x160 [nfsd] [] ? nfsd_destroy+0x60/0x60 [nfsd] [] kthread+0xd8/0xf0 [] ret_from_fork+0x1f/0x40 [] ? kthread_park+0x60/0x60 Code: 00 00 48 89 f8 48 83 fa 20 72 7e 40 38 fe 7c 35 48 83 ea 20 48 83 ea 20 4c 8b 06 4c 8b 4e 08 4c 8b 56 10 4c 8b 5e 18 48 8d 76 20 <4c> 89 07 4c 89 4f 08 4c 89 57 10 4c 89 5f 18 48 8d 7f 20 73 d4 RIP [] memcpy_orig+0x29/0x110 RSP CR2: 0000000000000000 Both Bruce and Eryu ran a bisect here and found that the problematic patch was 68778945e46 (SUNRPC: Separate buffer pointers for RPC Call and Reply messages). That patch changed rpc_xdr_encode to use a new rq_rbuffer pointer to set up the receive buffer, but didn't change all of the necessary codepaths to set it properly. In particular the backchannel setup was missing. We need to set rq_rbuffer whenever rq_buffer is set. Ensure that it is. Reviewed-by: Chuck Lever Tested-by: Chuck Lever Reported-by: Eryu Guan Tested-by: Eryu Guan Fixes: 68778945e46 "SUNRPC: Separate buffer pointers..." Reported-by: J. Bruce Fields Signed-off-by: Jeff Layton Signed-off-by: J. Bruce Fields --- net/sunrpc/xprtrdma/svc_rdma_backchannel.c | 1 + net/sunrpc/xprtsock.c | 1 + 2 files changed, 2 insertions(+) diff --git a/net/sunrpc/xprtrdma/svc_rdma_backchannel.c b/net/sunrpc/xprtrdma/svc_rdma_backchannel.c index 2d8545c34095..fc4535ead7c2 100644 --- a/net/sunrpc/xprtrdma/svc_rdma_backchannel.c +++ b/net/sunrpc/xprtrdma/svc_rdma_backchannel.c @@ -182,6 +182,7 @@ xprt_rdma_bc_allocate(struct rpc_task *task) return -ENOMEM; rqst->rq_buffer = page_address(page); + rqst->rq_rbuffer = (char *)rqst->rq_buffer + rqst->rq_callsize; return 0; } diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c index 0137af1c0916..e01c825bc683 100644 --- a/net/sunrpc/xprtsock.c +++ b/net/sunrpc/xprtsock.c @@ -2563,6 +2563,7 @@ static int bc_malloc(struct rpc_task *task) buf->len = PAGE_SIZE; rqst->rq_buffer = buf->data; + rqst->rq_rbuffer = (char *)rqst->rq_buffer + rqst->rq_callsize; return 0; } From 9a8b27fac5bbb77337cc2e5d31d37c9936782d87 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Thu, 27 Oct 2016 15:22:13 -0700 Subject: [PATCH 186/792] raid5-cache: correct condition for empty metadata write As long as we recover one metadata block, we should write the empty metadata write. The original code could make recovery corrupted if only one meta is valid. Reported-by: Zhengyuan Liu Signed-off-by: Shaohua Li --- drivers/md/raid5-cache.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/raid5-cache.c b/drivers/md/raid5-cache.c index 981f85515191..a227a9f3ee65 100644 --- a/drivers/md/raid5-cache.c +++ b/drivers/md/raid5-cache.c @@ -1087,7 +1087,7 @@ static int r5l_recovery_log(struct r5l_log *log) * 1's seq + 10 and let superblock points to meta2. The same recovery will * not think meta 3 is a valid meta, because its seq doesn't match */ - if (ctx.seq > log->last_cp_seq + 1) { + if (ctx.seq > log->last_cp_seq) { int ret; ret = r5l_log_write_empty_meta_block(log, ctx.pos, ctx.seq + 10); From 7449f699b2fb23bdee0a0f03aa4efb5f96fd403f Mon Sep 17 00:00:00 2001 From: Tomasz Majchrzak Date: Fri, 28 Oct 2016 14:45:58 +0200 Subject: [PATCH 187/792] raid1: handle read error also in readonly mode If write is the first operation on a disk and it happens not to be aligned to page size, block layer sends read request first. If read operation fails, the disk is set as failed as no attempt to fix the error is made because array is in auto-readonly mode. Similarily, the disk is set as failed for read-only array. Take the same approach as in raid10. Don't fail the disk if array is in readonly or auto-readonly mode. Try to redirect the request first and if unsuccessful, return a read error. Signed-off-by: Tomasz Majchrzak Signed-off-by: Shaohua Li --- drivers/md/raid1.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index db536a68b2ee..29e2df5cd77b 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -2297,17 +2297,23 @@ static void handle_read_error(struct r1conf *conf, struct r1bio *r1_bio) * This is all done synchronously while the array is * frozen */ + + bio = r1_bio->bios[r1_bio->read_disk]; + bdevname(bio->bi_bdev, b); + bio_put(bio); + r1_bio->bios[r1_bio->read_disk] = NULL; + if (mddev->ro == 0) { freeze_array(conf, 1); fix_read_error(conf, r1_bio->read_disk, r1_bio->sector, r1_bio->sectors); unfreeze_array(conf); - } else - md_error(mddev, conf->mirrors[r1_bio->read_disk].rdev); + } else { + r1_bio->bios[r1_bio->read_disk] = IO_BLOCKED; + } + rdev_dec_pending(conf->mirrors[r1_bio->read_disk].rdev, conf->mddev); - bio = r1_bio->bios[r1_bio->read_disk]; - bdevname(bio->bi_bdev, b); read_more: disk = read_balance(conf, r1_bio, &max_sectors); if (disk == -1) { @@ -2318,11 +2324,6 @@ read_more: } else { const unsigned long do_sync = r1_bio->master_bio->bi_opf & REQ_SYNC; - if (bio) { - r1_bio->bios[r1_bio->read_disk] = - mddev->ro ? IO_BLOCKED : NULL; - bio_put(bio); - } r1_bio->read_disk = disk; bio = bio_clone_mddev(r1_bio->master_bio, GFP_NOIO, mddev); bio_trim(bio, r1_bio->sector - bio->bi_iter.bi_sector, From 1217e1d1999ed6c9c1e1b1acae0a74ab70464ae2 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 28 Oct 2016 15:59:41 +1100 Subject: [PATCH 188/792] md: be careful not lot leak internal curr_resync value into metadata. -- (all) mddev->curr_resync usually records where the current resync is up to, but during the starting phase it has some "magic" values. 1 - means that the array is trying to start a resync, but has yielded to another array which shares physical devices, and also needs to start a resync 2 - means the array is trying to start resync, but has found another array which shares physical devices and has already started resync. 3 - means that resync has commensed, but it is possible that nothing has actually been resynced yet. It is important that this value not be visible to user-space and particularly that it doesn't get written to the metadata, as the resync or recovery checkpoint. In part, this is because it may be slightly higher than the correct value, though this is very rare. In part, because it is not a multiple of 4K, and some devices only support 4K aligned accesses. There are two places where this value is propagates into either ->curr_resync_completed or ->recovery_cp or ->recovery_offset. These currently avoid the propagation of values 1 and 3, but will allow 3 to leak through. Change them to only propagate the value if it is > 3. As this can cause an array to fail, the patch is suitable for -stable. Cc: stable@vger.kernel.org (v3.7+) Reported-by: Viswesh Signed-off-by: NeilBrown Signed-off-by: Shaohua Li --- drivers/md/md.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index 25b57a55db1a..2089d46b0eb8 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -8144,14 +8144,14 @@ void md_do_sync(struct md_thread *thread) if (!test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery) && !test_bit(MD_RECOVERY_INTR, &mddev->recovery) && - mddev->curr_resync > 2) { + mddev->curr_resync > 3) { mddev->curr_resync_completed = mddev->curr_resync; sysfs_notify(&mddev->kobj, NULL, "sync_completed"); } mddev->pers->sync_request(mddev, max_sectors, &skipped); if (!test_bit(MD_RECOVERY_CHECK, &mddev->recovery) && - mddev->curr_resync > 2) { + mddev->curr_resync > 3) { if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery)) { if (test_bit(MD_RECOVERY_INTR, &mddev->recovery)) { if (mddev->curr_resync >= mddev->recovery_cp) { From d304286abbbe7ed6228a553a56ba054e900907eb Mon Sep 17 00:00:00 2001 From: Lorenzo Bianconi Date: Tue, 25 Oct 2016 23:07:38 +0200 Subject: [PATCH 189/792] iio: st_sensors: fix scale configuration for h3lis331dl fix scale configuration/parsing for h3lis331dl accel driver when sensitivity is higher than 1(m/s^2)/digit Signed-off-by: Lorenzo Bianconi Fixes: 1e52fefc9b0c ("iio: accel: Add support for the h3lis331dl accelerometer") Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/accel/st_accel_core.c | 12 ++++++++---- drivers/iio/common/st_sensors/st_sensors_core.c | 8 +++++--- 2 files changed, 13 insertions(+), 7 deletions(-) diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c index da3fb069ec5c..ce69048c88e9 100644 --- a/drivers/iio/accel/st_accel_core.c +++ b/drivers/iio/accel/st_accel_core.c @@ -743,8 +743,8 @@ static int st_accel_read_raw(struct iio_dev *indio_dev, return IIO_VAL_INT; case IIO_CHAN_INFO_SCALE: - *val = 0; - *val2 = adata->current_fullscale->gain; + *val = adata->current_fullscale->gain / 1000000; + *val2 = adata->current_fullscale->gain % 1000000; return IIO_VAL_INT_PLUS_MICRO; case IIO_CHAN_INFO_SAMP_FREQ: *val = adata->odr; @@ -763,9 +763,13 @@ static int st_accel_write_raw(struct iio_dev *indio_dev, int err; switch (mask) { - case IIO_CHAN_INFO_SCALE: - err = st_sensors_set_fullscale_by_gain(indio_dev, val2); + case IIO_CHAN_INFO_SCALE: { + int gain; + + gain = val * 1000000 + val2; + err = st_sensors_set_fullscale_by_gain(indio_dev, gain); break; + } case IIO_CHAN_INFO_SAMP_FREQ: if (val2) return -EINVAL; diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c index 285a64a589d7..975a1f19f747 100644 --- a/drivers/iio/common/st_sensors/st_sensors_core.c +++ b/drivers/iio/common/st_sensors/st_sensors_core.c @@ -612,7 +612,7 @@ EXPORT_SYMBOL(st_sensors_sysfs_sampling_frequency_avail); ssize_t st_sensors_sysfs_scale_avail(struct device *dev, struct device_attribute *attr, char *buf) { - int i, len = 0; + int i, len = 0, q, r; struct iio_dev *indio_dev = dev_get_drvdata(dev); struct st_sensor_data *sdata = iio_priv(indio_dev); @@ -621,8 +621,10 @@ ssize_t st_sensors_sysfs_scale_avail(struct device *dev, if (sdata->sensor_settings->fs.fs_avl[i].num == 0) break; - len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06u ", - sdata->sensor_settings->fs.fs_avl[i].gain); + q = sdata->sensor_settings->fs.fs_avl[i].gain / 1000000; + r = sdata->sensor_settings->fs.fs_avl[i].gain % 1000000; + + len += scnprintf(buf + len, PAGE_SIZE - len, "%u.%06u ", q, r); } mutex_unlock(&indio_dev->mlock); buf[len - 1] = '\n'; From 0b944d3a4bba6b25f43aed530f4fa85c04d162a6 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Sun, 30 Oct 2016 11:42:01 -0500 Subject: [PATCH 190/792] aio: hold an extra file reference over AIO read/write operations Otherwise we might dereference an already freed file and/or inode when aio_complete is called before we return from the read_iter or write_iter method. Signed-off-by: Christoph Hellwig Signed-off-by: Al Viro --- fs/aio.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/aio.c b/fs/aio.c index 1157e13a36d6..0aa71d338c04 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -1460,6 +1460,7 @@ rw_common: return ret; } + get_file(file); if (rw == WRITE) file_start_write(file); @@ -1467,6 +1468,7 @@ rw_common: if (rw == WRITE) file_end_write(file); + fput(file); kfree(iovec); break; From 723c038475b78edc9327eb952f95f9881cc9d79d Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Sun, 30 Oct 2016 11:42:02 -0500 Subject: [PATCH 191/792] fs: remove the never implemented aio_fsync file operation Signed-off-by: Christoph Hellwig Signed-off-by: Al Viro --- Documentation/filesystems/Locking | 1 - Documentation/filesystems/vfs.txt | 1 - fs/aio.c | 14 -------------- fs/ntfs/dir.c | 2 -- include/linux/fs.h | 1 - 5 files changed, 19 deletions(-) diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking index 14cdc101d165..1b5f15653b1b 100644 --- a/Documentation/filesystems/Locking +++ b/Documentation/filesystems/Locking @@ -447,7 +447,6 @@ prototypes: int (*flush) (struct file *); int (*release) (struct inode *, struct file *); int (*fsync) (struct file *, loff_t start, loff_t end, int datasync); - int (*aio_fsync) (struct kiocb *, int datasync); int (*fasync) (int, struct file *, int); int (*lock) (struct file *, int, struct file_lock *); ssize_t (*readv) (struct file *, const struct iovec *, unsigned long, diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index d619c8d71966..b5039a00caaf 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt @@ -828,7 +828,6 @@ struct file_operations { int (*flush) (struct file *, fl_owner_t id); int (*release) (struct inode *, struct file *); int (*fsync) (struct file *, loff_t, loff_t, int datasync); - int (*aio_fsync) (struct kiocb *, int datasync); int (*fasync) (int, struct file *, int); int (*lock) (struct file *, int, struct file_lock *); ssize_t (*sendpage) (struct file *, struct page *, int, size_t, loff_t *, int); diff --git a/fs/aio.c b/fs/aio.c index 0aa71d338c04..2a6030af6ba5 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -1472,20 +1472,6 @@ rw_common: kfree(iovec); break; - case IOCB_CMD_FDSYNC: - if (!file->f_op->aio_fsync) - return -EINVAL; - - ret = file->f_op->aio_fsync(req, 1); - break; - - case IOCB_CMD_FSYNC: - if (!file->f_op->aio_fsync) - return -EINVAL; - - ret = file->f_op->aio_fsync(req, 0); - break; - default: pr_debug("EINVAL: no operation provided\n"); return -EINVAL; diff --git a/fs/ntfs/dir.c b/fs/ntfs/dir.c index a18613579001..0ee19ecc982d 100644 --- a/fs/ntfs/dir.c +++ b/fs/ntfs/dir.c @@ -1544,8 +1544,6 @@ const struct file_operations ntfs_dir_ops = { .iterate = ntfs_readdir, /* Read directory contents. */ #ifdef NTFS_RW .fsync = ntfs_dir_fsync, /* Sync a directory to disk. */ - /*.aio_fsync = ,*/ /* Sync all outstanding async - i/o operations on a kiocb. */ #endif /* NTFS_RW */ /*.ioctl = ,*/ /* Perform function on the mounted filesystem. */ diff --git a/include/linux/fs.h b/include/linux/fs.h index 16d2b6e874d6..ff7bcd9e8398 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1709,7 +1709,6 @@ struct file_operations { int (*flush) (struct file *, fl_owner_t id); int (*release) (struct inode *, struct file *); int (*fsync) (struct file *, loff_t, loff_t, int datasync); - int (*aio_fsync) (struct kiocb *, int datasync); int (*fasync) (int, struct file *, int); int (*lock) (struct file *, int, struct file_lock *); ssize_t (*sendpage) (struct file *, struct page *, int, size_t, loff_t *, int); From 89319d31d2d097da8e27fb0e0ae9d532f4f16827 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Sun, 30 Oct 2016 11:42:03 -0500 Subject: [PATCH 192/792] fs: remove aio_run_iocb Pass the ABI iocb structure to aio_setup_rw and let it handle the non-vectored I/O case as well. With that and a new helper for the AIO return value handling we can now define new aio_read and aio_write helpers that implement reads and writes in a self-contained way without duplicating too much code. Signed-off-by: Christoph Hellwig Signed-off-by: Al Viro --- fs/aio.c | 188 ++++++++++++++++++++++++++++--------------------------- 1 file changed, 97 insertions(+), 91 deletions(-) diff --git a/fs/aio.c b/fs/aio.c index 2a6030af6ba5..c19755187ca5 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -1392,110 +1392,100 @@ SYSCALL_DEFINE1(io_destroy, aio_context_t, ctx) return -EINVAL; } -typedef ssize_t (rw_iter_op)(struct kiocb *, struct iov_iter *); - -static int aio_setup_vectored_rw(int rw, char __user *buf, size_t len, - struct iovec **iovec, - bool compat, - struct iov_iter *iter) +static int aio_setup_rw(int rw, struct iocb *iocb, struct iovec **iovec, + bool vectored, bool compat, struct iov_iter *iter) { + void __user *buf = (void __user *)(uintptr_t)iocb->aio_buf; + size_t len = iocb->aio_nbytes; + + if (!vectored) { + ssize_t ret = import_single_range(rw, buf, len, *iovec, iter); + *iovec = NULL; + return ret; + } #ifdef CONFIG_COMPAT if (compat) - return compat_import_iovec(rw, - (struct compat_iovec __user *)buf, - len, UIO_FASTIOV, iovec, iter); + return compat_import_iovec(rw, buf, len, UIO_FASTIOV, iovec, + iter); #endif - return import_iovec(rw, (struct iovec __user *)buf, - len, UIO_FASTIOV, iovec, iter); + return import_iovec(rw, buf, len, UIO_FASTIOV, iovec, iter); } -/* - * aio_run_iocb: - * Performs the initial checks and io submission. - */ -static ssize_t aio_run_iocb(struct kiocb *req, unsigned opcode, - char __user *buf, size_t len, bool compat) +static inline ssize_t aio_ret(struct kiocb *req, ssize_t ret) { - struct file *file = req->ki_filp; - ssize_t ret; - int rw; - fmode_t mode; - rw_iter_op *iter_op; - struct iovec inline_vecs[UIO_FASTIOV], *iovec = inline_vecs; - struct iov_iter iter; - - switch (opcode) { - case IOCB_CMD_PREAD: - case IOCB_CMD_PREADV: - mode = FMODE_READ; - rw = READ; - iter_op = file->f_op->read_iter; - goto rw_common; - - case IOCB_CMD_PWRITE: - case IOCB_CMD_PWRITEV: - mode = FMODE_WRITE; - rw = WRITE; - iter_op = file->f_op->write_iter; - goto rw_common; -rw_common: - if (unlikely(!(file->f_mode & mode))) - return -EBADF; - - if (!iter_op) - return -EINVAL; - - if (opcode == IOCB_CMD_PREADV || opcode == IOCB_CMD_PWRITEV) - ret = aio_setup_vectored_rw(rw, buf, len, - &iovec, compat, &iter); - else { - ret = import_single_range(rw, buf, len, iovec, &iter); - iovec = NULL; - } - if (!ret) - ret = rw_verify_area(rw, file, &req->ki_pos, - iov_iter_count(&iter)); - if (ret < 0) { - kfree(iovec); - return ret; - } - - get_file(file); - if (rw == WRITE) - file_start_write(file); - - ret = iter_op(req, &iter); - - if (rw == WRITE) - file_end_write(file); - fput(file); - kfree(iovec); - break; - - default: - pr_debug("EINVAL: no operation provided\n"); - return -EINVAL; - } - - if (ret != -EIOCBQUEUED) { + switch (ret) { + case -EIOCBQUEUED: + return ret; + case -ERESTARTSYS: + case -ERESTARTNOINTR: + case -ERESTARTNOHAND: + case -ERESTART_RESTARTBLOCK: /* * There's no easy way to restart the syscall since other AIO's * may be already running. Just fail this IO with EINTR. */ - if (unlikely(ret == -ERESTARTSYS || ret == -ERESTARTNOINTR || - ret == -ERESTARTNOHAND || - ret == -ERESTART_RESTARTBLOCK)) - ret = -EINTR; + ret = -EINTR; + /*FALLTHRU*/ + default: aio_complete(req, ret, 0); + return 0; } +} - return 0; +static ssize_t aio_read(struct kiocb *req, struct iocb *iocb, bool vectored, + bool compat) +{ + struct file *file = req->ki_filp; + struct iovec inline_vecs[UIO_FASTIOV], *iovec = inline_vecs; + struct iov_iter iter; + ssize_t ret; + + if (unlikely(!(file->f_mode & FMODE_READ))) + return -EBADF; + if (unlikely(!file->f_op->read_iter)) + return -EINVAL; + + ret = aio_setup_rw(READ, iocb, &iovec, vectored, compat, &iter); + if (ret) + return ret; + ret = rw_verify_area(READ, file, &req->ki_pos, iov_iter_count(&iter)); + if (!ret) + ret = aio_ret(req, file->f_op->read_iter(req, &iter)); + kfree(iovec); + return ret; +} + +static ssize_t aio_write(struct kiocb *req, struct iocb *iocb, bool vectored, + bool compat) +{ + struct file *file = req->ki_filp; + struct iovec inline_vecs[UIO_FASTIOV], *iovec = inline_vecs; + struct iov_iter iter; + ssize_t ret; + + if (unlikely(!(file->f_mode & FMODE_WRITE))) + return -EBADF; + if (unlikely(!file->f_op->write_iter)) + return -EINVAL; + + ret = aio_setup_rw(WRITE, iocb, &iovec, vectored, compat, &iter); + if (ret) + return ret; + ret = rw_verify_area(WRITE, file, &req->ki_pos, iov_iter_count(&iter)); + if (!ret) { + file_start_write(file); + ret = aio_ret(req, file->f_op->write_iter(req, &iter)); + file_end_write(file); + } + kfree(iovec); + return ret; } static int io_submit_one(struct kioctx *ctx, struct iocb __user *user_iocb, struct iocb *iocb, bool compat) { struct aio_kiocb *req; + struct file *file; ssize_t ret; /* enforce forwards compatibility on users */ @@ -1518,7 +1508,7 @@ static int io_submit_one(struct kioctx *ctx, struct iocb __user *user_iocb, if (unlikely(!req)) return -EAGAIN; - req->common.ki_filp = fget(iocb->aio_fildes); + req->common.ki_filp = file = fget(iocb->aio_fildes); if (unlikely(!req->common.ki_filp)) { ret = -EBADF; goto out_put_req; @@ -1553,13 +1543,29 @@ static int io_submit_one(struct kioctx *ctx, struct iocb __user *user_iocb, req->ki_user_iocb = user_iocb; req->ki_user_data = iocb->aio_data; - ret = aio_run_iocb(&req->common, iocb->aio_lio_opcode, - (char __user *)(unsigned long)iocb->aio_buf, - iocb->aio_nbytes, - compat); - if (ret) - goto out_put_req; + get_file(file); + switch (iocb->aio_lio_opcode) { + case IOCB_CMD_PREAD: + ret = aio_read(&req->common, iocb, false, compat); + break; + case IOCB_CMD_PWRITE: + ret = aio_write(&req->common, iocb, false, compat); + break; + case IOCB_CMD_PREADV: + ret = aio_read(&req->common, iocb, true, compat); + break; + case IOCB_CMD_PWRITEV: + ret = aio_write(&req->common, iocb, true, compat); + break; + default: + pr_debug("invalid aio operation %d\n", iocb->aio_lio_opcode); + ret = -EINVAL; + break; + } + fput(file); + if (ret && ret != -EIOCBQUEUED) + goto out_put_req; return 0; out_put_req: put_reqs_available(ctx, 1); From 70fe2f48152e60664809e2fed76bbb50c9fa2aa3 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Sun, 30 Oct 2016 11:42:04 -0500 Subject: [PATCH 193/792] aio: fix freeze protection of aio writes Currently we dropped freeze protection of aio writes just after IO was submitted. Thus aio write could be in flight while the filesystem was frozen and that could result in unexpected situation like aio completion wanting to convert extent type on frozen filesystem. Testcase from Dmitry triggering this is like: for ((i=0;i<60;i++));do fsfreeze -f /mnt ;sleep 1;fsfreeze -u /mnt;done & fio --bs=4k --ioengine=libaio --iodepth=128 --size=1g --direct=1 \ --runtime=60 --filename=/mnt/file --name=rand-write --rw=randwrite Fix the problem by dropping freeze protection only once IO is completed in aio_complete(). Reported-by: Dmitry Monakhov Signed-off-by: Jan Kara [hch: forward ported on top of various VFS and aio changes] Signed-off-by: Christoph Hellwig Signed-off-by: Al Viro --- fs/aio.c | 19 ++++++++++++++++++- include/linux/fs.h | 1 + 2 files changed, 19 insertions(+), 1 deletion(-) diff --git a/fs/aio.c b/fs/aio.c index c19755187ca5..428484f2f841 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -1078,6 +1078,17 @@ static void aio_complete(struct kiocb *kiocb, long res, long res2) unsigned tail, pos, head; unsigned long flags; + if (kiocb->ki_flags & IOCB_WRITE) { + struct file *file = kiocb->ki_filp; + + /* + * Tell lockdep we inherited freeze protection from submission + * thread. + */ + __sb_writers_acquired(file_inode(file)->i_sb, SB_FREEZE_WRITE); + file_end_write(file); + } + /* * Special case handling for sync iocbs: * - events go directly into the iocb for fast handling @@ -1473,9 +1484,15 @@ static ssize_t aio_write(struct kiocb *req, struct iocb *iocb, bool vectored, return ret; ret = rw_verify_area(WRITE, file, &req->ki_pos, iov_iter_count(&iter)); if (!ret) { + req->ki_flags |= IOCB_WRITE; file_start_write(file); ret = aio_ret(req, file->f_op->write_iter(req, &iter)); - file_end_write(file); + /* + * We release freeze protection in aio_complete(). Fool lockdep + * by telling it the lock got released so that it doesn't + * complain about held lock when we return to userspace. + */ + __sb_writers_release(file_inode(file)->i_sb, SB_FREEZE_WRITE); } kfree(iovec); return ret; diff --git a/include/linux/fs.h b/include/linux/fs.h index ff7bcd9e8398..dc0478c07b2a 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -321,6 +321,7 @@ struct writeback_control; #define IOCB_HIPRI (1 << 3) #define IOCB_DSYNC (1 << 4) #define IOCB_SYNC (1 << 5) +#define IOCB_WRITE (1 << 6) struct kiocb { struct file *ki_filp; From a0be1db4304f51c99af6b6e515549794182a94df Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Wed, 14 Sep 2016 17:33:26 +0100 Subject: [PATCH 194/792] virtio_pci: Limit DMA mask to 44 bits for legacy virtio devices Legacy virtio defines the virtqueue base using a 32-bit PFN field, with a read-only register indicating a fixed page size of 4k. This can cause problems for DMA allocators that allocate top down from the DMA mask, which is set to 64 bits. In this case, the addresses are silently truncated to 44-bit, leading to IOMMU faults, failure to read from the queue or data corruption. This patch restricts the coherent DMA mask for legacy PCI virtio devices to 44 bits, which matches the specification. Cc: stable@vger.kernel.org Cc: Andy Lutomirski Cc: Michael S. Tsirkin Cc: Benjamin Serebrin Signed-off-by: Will Deacon Signed-off-by: Michael S. Tsirkin --- drivers/virtio/virtio_pci_legacy.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/virtio/virtio_pci_legacy.c b/drivers/virtio/virtio_pci_legacy.c index 8c4e61783441..6d9e5173d5fa 100644 --- a/drivers/virtio/virtio_pci_legacy.c +++ b/drivers/virtio/virtio_pci_legacy.c @@ -212,10 +212,18 @@ int virtio_pci_legacy_probe(struct virtio_pci_device *vp_dev) return -ENODEV; } - rc = dma_set_mask_and_coherent(&pci_dev->dev, DMA_BIT_MASK(64)); - if (rc) - rc = dma_set_mask_and_coherent(&pci_dev->dev, - DMA_BIT_MASK(32)); + rc = dma_set_mask(&pci_dev->dev, DMA_BIT_MASK(64)); + if (rc) { + rc = dma_set_mask_and_coherent(&pci_dev->dev, DMA_BIT_MASK(32)); + } else { + /* + * The virtio ring base address is expressed as a 32-bit PFN, + * with a page size of 1 << VIRTIO_PCI_QUEUE_ADDR_SHIFT. + */ + dma_set_coherent_mask(&pci_dev->dev, + DMA_BIT_MASK(32 + VIRTIO_PCI_QUEUE_ADDR_SHIFT)); + } + if (rc) dev_warn(&pci_dev->dev, "Failed to enable 64-bit or 32-bit DMA. Trying to continue, but this might not work.\n"); From 0ea1e4a6d9b62cf29e210d2b4ba9fd43917522e3 Mon Sep 17 00:00:00 2001 From: Ladi Prosek Date: Wed, 31 Aug 2016 14:00:04 +0200 Subject: [PATCH 195/792] virtio_ring: Make interrupt suppression spec compliant According to the spec, if the VIRTIO_RING_F_EVENT_IDX feature bit is negotiated the driver MUST set flags to 0. Not dirtying the available ring in virtqueue_disable_cb also has a minor positive performance impact, improving L1 dcache load missed by ~0.5% in vring_bench. Writes to the used event field (vring_used_event) are still unconditional. Cc: Michael S. Tsirkin Cc: # f277ec4 virtio_ring: shadow available Cc: Signed-off-by: Ladi Prosek Signed-off-by: Michael S. Tsirkin --- drivers/virtio/virtio_ring.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c index ed9c9eeedfe5..6b2cd922d322 100644 --- a/drivers/virtio/virtio_ring.c +++ b/drivers/virtio/virtio_ring.c @@ -732,7 +732,8 @@ void virtqueue_disable_cb(struct virtqueue *_vq) if (!(vq->avail_flags_shadow & VRING_AVAIL_F_NO_INTERRUPT)) { vq->avail_flags_shadow |= VRING_AVAIL_F_NO_INTERRUPT; - vq->vring.avail->flags = cpu_to_virtio16(_vq->vdev, vq->avail_flags_shadow); + if (!vq->event) + vq->vring.avail->flags = cpu_to_virtio16(_vq->vdev, vq->avail_flags_shadow); } } @@ -764,7 +765,8 @@ unsigned virtqueue_enable_cb_prepare(struct virtqueue *_vq) * entry. Always do both to keep code simple. */ if (vq->avail_flags_shadow & VRING_AVAIL_F_NO_INTERRUPT) { vq->avail_flags_shadow &= ~VRING_AVAIL_F_NO_INTERRUPT; - vq->vring.avail->flags = cpu_to_virtio16(_vq->vdev, vq->avail_flags_shadow); + if (!vq->event) + vq->vring.avail->flags = cpu_to_virtio16(_vq->vdev, vq->avail_flags_shadow); } vring_used_event(&vq->vring) = cpu_to_virtio16(_vq->vdev, last_used_idx = vq->last_used_idx); END_USE(vq); @@ -832,10 +834,11 @@ bool virtqueue_enable_cb_delayed(struct virtqueue *_vq) * more to do. */ /* Depending on the VIRTIO_RING_F_USED_EVENT_IDX feature, we need to * either clear the flags bit or point the event index at the next - * entry. Always do both to keep code simple. */ + * entry. Always update the event index to keep code simple. */ if (vq->avail_flags_shadow & VRING_AVAIL_F_NO_INTERRUPT) { vq->avail_flags_shadow &= ~VRING_AVAIL_F_NO_INTERRUPT; - vq->vring.avail->flags = cpu_to_virtio16(_vq->vdev, vq->avail_flags_shadow); + if (!vq->event) + vq->vring.avail->flags = cpu_to_virtio16(_vq->vdev, vq->avail_flags_shadow); } /* TODO: tune this threshold */ bufs = (u16)(vq->avail_idx_shadow - vq->last_used_idx) * 3 / 4; @@ -953,7 +956,8 @@ struct virtqueue *__vring_new_virtqueue(unsigned int index, /* No callback? Tell other side not to bother us. */ if (!callback) { vq->avail_flags_shadow |= VRING_AVAIL_F_NO_INTERRUPT; - vq->vring.avail->flags = cpu_to_virtio16(vdev, vq->avail_flags_shadow); + if (!vq->event) + vq->vring.avail->flags = cpu_to_virtio16(vdev, vq->avail_flags_shadow); } /* Put everything in free lists. */ From 8424af5336b34043a705d66bdf2c1428048ef085 Mon Sep 17 00:00:00 2001 From: Konstantin Neumoin Date: Thu, 29 Sep 2016 13:17:12 +0300 Subject: [PATCH 196/792] virtio: update balloon size in balloon "probe" The following commit 'fad7b7b27b6a (virtio_balloon: Use a workqueue instead of "vballoon" kthread)' has added a regression. Original code with kthread starts the thread inside probe and checks the necessity to update balloon inside the thread immediately. Nowadays the code behaves differently. Work is queued only on the first command from the host after the negotiation. Thus there is a window especially at the guest startup or the module reloading when the balloon size is not updated until the notification from the host. This patch adds balloon size check at the end of the probe to match original behaviour. Signed-off-by: Konstantin Neumoin Signed-off-by: Denis V. Lunev Signed-off-by: Michael S. Tsirkin --- drivers/virtio/virtio_balloon.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/virtio/virtio_balloon.c b/drivers/virtio/virtio_balloon.c index 4e7003db12c4..181793f07852 100644 --- a/drivers/virtio/virtio_balloon.c +++ b/drivers/virtio/virtio_balloon.c @@ -577,6 +577,8 @@ static int virtballoon_probe(struct virtio_device *vdev) virtio_device_ready(vdev); + if (towards_target(vb)) + virtballoon_changed(vdev); return 0; out_del_vqs: From 44d65ea1615099ae252407f2554338d450cfdb1c Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Thu, 6 Oct 2016 11:39:10 +0200 Subject: [PATCH 197/792] ringtest: use link-time optimization By using -flto and -fwhole-program, all functions from the ring implementation can be treated as static and possibly inlined. Force this to happen through the GCC flatten attribute. Signed-off-by: Paolo Bonzini Signed-off-by: Michael S. Tsirkin --- tools/virtio/ringtest/Makefile | 4 ++-- tools/virtio/ringtest/main.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/tools/virtio/ringtest/Makefile b/tools/virtio/ringtest/Makefile index 877a8a4721b6..c012edbdb13b 100644 --- a/tools/virtio/ringtest/Makefile +++ b/tools/virtio/ringtest/Makefile @@ -3,8 +3,8 @@ all: all: ring virtio_ring_0_9 virtio_ring_poll virtio_ring_inorder ptr_ring noring CFLAGS += -Wall -CFLAGS += -pthread -O2 -ggdb -LDFLAGS += -pthread -O2 -ggdb +CFLAGS += -pthread -O2 -ggdb -flto -fwhole-program +LDFLAGS += -pthread -O2 -ggdb -flto -fwhole-program main.o: main.c main.h ring.o: ring.c main.h diff --git a/tools/virtio/ringtest/main.c b/tools/virtio/ringtest/main.c index 147abb452a6c..bda7f0dad981 100644 --- a/tools/virtio/ringtest/main.c +++ b/tools/virtio/ringtest/main.c @@ -96,7 +96,7 @@ void set_affinity(const char *arg) assert(!ret); } -static void run_guest(void) +static void __attribute__((__flatten__)) run_guest(void) { int completed_before; int completed = 0; @@ -149,7 +149,7 @@ static void run_guest(void) } } -static void run_host(void) +static void __attribute__((__flatten__)) run_host(void) { int completed_before; int completed = 0; From d3c3589b8b3cd4fabf4cd137facb42a7fb36bd7f Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Thu, 6 Oct 2016 11:39:11 +0200 Subject: [PATCH 198/792] ringtest: commonize implementation of poll_avail/poll_used Provide new primitives used_empty/avail_empty and build poll_avail/poll_used on top of it. Signed-off-by: Paolo Bonzini Signed-off-by: Michael S. Tsirkin --- tools/virtio/ringtest/main.c | 12 +++++ tools/virtio/ringtest/main.h | 4 +- tools/virtio/ringtest/noring.c | 6 ++- tools/virtio/ringtest/ptr_ring.c | 22 ++------- tools/virtio/ringtest/ring.c | 18 +++---- tools/virtio/ringtest/virtio_ring_0_9.c | 64 ++++++------------------- 6 files changed, 43 insertions(+), 83 deletions(-) diff --git a/tools/virtio/ringtest/main.c b/tools/virtio/ringtest/main.c index bda7f0dad981..b00ecd619969 100644 --- a/tools/virtio/ringtest/main.c +++ b/tools/virtio/ringtest/main.c @@ -96,6 +96,12 @@ void set_affinity(const char *arg) assert(!ret); } +void poll_used(void) +{ + while (used_empty()) + busy_wait(); +} + static void __attribute__((__flatten__)) run_guest(void) { int completed_before; @@ -149,6 +155,12 @@ static void __attribute__((__flatten__)) run_guest(void) } } +void poll_avail(void) +{ + while (avail_empty()) + busy_wait(); +} + static void __attribute__((__flatten__)) run_host(void) { int completed_before; diff --git a/tools/virtio/ringtest/main.h b/tools/virtio/ringtest/main.h index 16917acb0ade..34e63cc4c572 100644 --- a/tools/virtio/ringtest/main.h +++ b/tools/virtio/ringtest/main.h @@ -56,15 +56,15 @@ void alloc_ring(void); int add_inbuf(unsigned, void *, void *); void *get_buf(unsigned *, void **); void disable_call(); +bool used_empty(); bool enable_call(); void kick_available(); -void poll_used(); /* host side */ void disable_kick(); +bool avail_empty(); bool enable_kick(); bool use_buf(unsigned *, void **); void call_used(); -void poll_avail(); /* implemented by main */ extern bool do_sleep; diff --git a/tools/virtio/ringtest/noring.c b/tools/virtio/ringtest/noring.c index eda2f4824130..b8d1c1daac7c 100644 --- a/tools/virtio/ringtest/noring.c +++ b/tools/virtio/ringtest/noring.c @@ -24,8 +24,9 @@ void *get_buf(unsigned *lenp, void **bufp) return "Buffer"; } -void poll_used(void) +bool used_empty() { + return false; } void disable_call() @@ -54,8 +55,9 @@ bool enable_kick() assert(0); } -void poll_avail(void) +bool avail_empty() { + return false; } bool use_buf(unsigned *lenp, void **bufp) diff --git a/tools/virtio/ringtest/ptr_ring.c b/tools/virtio/ringtest/ptr_ring.c index bd2ad1d3b7a9..635b07b4fdd3 100644 --- a/tools/virtio/ringtest/ptr_ring.c +++ b/tools/virtio/ringtest/ptr_ring.c @@ -133,18 +133,9 @@ void *get_buf(unsigned *lenp, void **bufp) return datap; } -void poll_used(void) +bool used_empty() { - void *b; - - do { - if (tailcnt == headcnt || __ptr_ring_full(&array)) { - b = NULL; - barrier(); - } else { - b = "Buffer\n"; - } - } while (!b); + return (tailcnt == headcnt || __ptr_ring_full(&array)); } void disable_call() @@ -173,14 +164,9 @@ bool enable_kick() assert(0); } -void poll_avail(void) +bool avail_empty() { - void *b; - - do { - barrier(); - b = __ptr_ring_peek(&array); - } while (!b); + return !__ptr_ring_peek(&array); } bool use_buf(unsigned *lenp, void **bufp) diff --git a/tools/virtio/ringtest/ring.c b/tools/virtio/ringtest/ring.c index c25c8d248b6b..747c5dd47be8 100644 --- a/tools/virtio/ringtest/ring.c +++ b/tools/virtio/ringtest/ring.c @@ -163,12 +163,11 @@ void *get_buf(unsigned *lenp, void **bufp) return datap; } -void poll_used(void) +bool used_empty() { unsigned head = (ring_size - 1) & guest.last_used_idx; - while (ring[head].flags & DESC_HW) - busy_wait(); + return (ring[head].flags & DESC_HW); } void disable_call() @@ -180,13 +179,11 @@ void disable_call() bool enable_call() { - unsigned head = (ring_size - 1) & guest.last_used_idx; - event->call_index = guest.last_used_idx; /* Flush call index write */ /* Barrier D (for pairing) */ smp_mb(); - return ring[head].flags & DESC_HW; + return used_empty(); } void kick_available(void) @@ -213,20 +210,17 @@ void disable_kick() bool enable_kick() { - unsigned head = (ring_size - 1) & host.used_idx; - event->kick_index = host.used_idx; /* Barrier C (for pairing) */ smp_mb(); - return !(ring[head].flags & DESC_HW); + return avail_empty(); } -void poll_avail(void) +bool avail_empty() { unsigned head = (ring_size - 1) & host.used_idx; - while (!(ring[head].flags & DESC_HW)) - busy_wait(); + return !(ring[head].flags & DESC_HW); } bool use_buf(unsigned *lenp, void **bufp) diff --git a/tools/virtio/ringtest/virtio_ring_0_9.c b/tools/virtio/ringtest/virtio_ring_0_9.c index 761866212aac..bbc3043b2fb1 100644 --- a/tools/virtio/ringtest/virtio_ring_0_9.c +++ b/tools/virtio/ringtest/virtio_ring_0_9.c @@ -194,24 +194,16 @@ void *get_buf(unsigned *lenp, void **bufp) return datap; } -void poll_used(void) +bool used_empty() { + unsigned short last_used_idx = guest.last_used_idx; #ifdef RING_POLL - unsigned head = (ring_size - 1) & guest.last_used_idx; + unsigned short head = last_used_idx & (ring_size - 1); + unsigned index = ring.used->ring[head].id; - for (;;) { - unsigned index = ring.used->ring[head].id; - - if ((index ^ guest.last_used_idx ^ 0x8000) & ~(ring_size - 1)) - busy_wait(); - else - break; - } + return (index ^ last_used_idx ^ 0x8000) & ~(ring_size - 1); #else - unsigned head = guest.last_used_idx; - - while (ring.used->idx == head) - busy_wait(); + return ring.used->idx == last_used_idx; #endif } @@ -224,22 +216,11 @@ void disable_call() bool enable_call() { - unsigned short last_used_idx; - - vring_used_event(&ring) = (last_used_idx = guest.last_used_idx); + vring_used_event(&ring) = guest.last_used_idx; /* Flush call index write */ /* Barrier D (for pairing) */ smp_mb(); -#ifdef RING_POLL - { - unsigned short head = last_used_idx & (ring_size - 1); - unsigned index = ring.used->ring[head].id; - - return (index ^ last_used_idx ^ 0x8000) & ~(ring_size - 1); - } -#else - return ring.used->idx == last_used_idx; -#endif + return used_empty(); } void kick_available(void) @@ -266,36 +247,21 @@ void disable_kick() bool enable_kick() { - unsigned head = host.used_idx; - - vring_avail_event(&ring) = head; + vring_avail_event(&ring) = host.used_idx; /* Barrier C (for pairing) */ smp_mb(); -#ifdef RING_POLL - { - unsigned index = ring.avail->ring[head & (ring_size - 1)]; - - return (index ^ head ^ 0x8000) & ~(ring_size - 1); - } -#else - return head == ring.avail->idx; -#endif + return avail_empty(); } -void poll_avail(void) +bool avail_empty() { unsigned head = host.used_idx; #ifdef RING_POLL - for (;;) { - unsigned index = ring.avail->ring[head & (ring_size - 1)]; - if ((index ^ head ^ 0x8000) & ~(ring_size - 1)) - busy_wait(); - else - break; - } + unsigned index = ring.avail->ring[head & (ring_size - 1)]; + + return ((index ^ head ^ 0x8000) & ~(ring_size - 1)); #else - while (ring.avail->idx == head) - busy_wait(); + return head == ring.avail->idx; #endif } From 948a8ac2964f39161ebf832dea0aa1ced90101bb Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Thu, 6 Oct 2016 11:39:12 +0200 Subject: [PATCH 199/792] ringtest: poll for new buffers once before updating event index Updating the event index has a memory barrier and causes more work on the other side to actually signal the event. It is unnecessary if a new buffer has already appeared on the ring, so poll once before doing the update. The effect of this on the 0.9 ring implementation is pretty much invisible, but on the new-style ring it provides a consistent 3% performance improvement. Signed-off-by: Paolo Bonzini Signed-off-by: Michael S. Tsirkin --- tools/virtio/ringtest/main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/virtio/ringtest/main.c b/tools/virtio/ringtest/main.c index b00ecd619969..f31353fac541 100644 --- a/tools/virtio/ringtest/main.c +++ b/tools/virtio/ringtest/main.c @@ -147,7 +147,7 @@ static void __attribute__((__flatten__)) run_guest(void) assert(completed <= bufs); assert(started <= bufs); if (do_sleep) { - if (enable_call()) + if (used_empty() && enable_call()) wait_for_call(); } else { poll_used(); @@ -172,7 +172,7 @@ static void __attribute__((__flatten__)) run_host(void) for (;;) { if (do_sleep) { - if (enable_kick()) + if (avail_empty() && enable_kick()) wait_for_kick(); } else { poll_avail(); From 34563769e438d2881f62cf4d9badc4e589ac0ec0 Mon Sep 17 00:00:00 2001 From: Matt Redfearn Date: Tue, 11 Oct 2016 12:05:15 +0100 Subject: [PATCH 200/792] virtio: console: Unlock vqs while freeing buffers Commit c6017e793b93 ("virtio: console: add locks around buffer removal in port unplug path") added locking around the freeing of buffers in the vq. However, when free_buf() is called with can_sleep = true and rproc is enabled, it calls dma_free_coherent() directly, requiring interrupts to be enabled. Currently a WARNING is triggered due to the spin locking around free_buf, with a call stack like this: WARNING: CPU: 3 PID: 121 at ./include/linux/dma-mapping.h:433 free_buf+0x1a8/0x288 Call Trace: [<8040c538>] show_stack+0x74/0xc0 [<80757240>] dump_stack+0xd0/0x110 [<80430d98>] __warn+0xfc/0x130 [<80430ee0>] warn_slowpath_null+0x2c/0x3c [<807e7c6c>] free_buf+0x1a8/0x288 [<807ea590>] remove_port_data+0x50/0xac [<807ea6a0>] unplug_port+0xb4/0x1bc [<807ea858>] virtcons_remove+0xb0/0xfc [<807b6734>] virtio_dev_remove+0x58/0xc0 [<807f918c>] __device_release_driver+0xac/0x134 [<807f924c>] device_release_driver+0x38/0x50 [<807f7edc>] bus_remove_device+0xfc/0x130 [<807f4b74>] device_del+0x17c/0x21c [<807f4c38>] device_unregister+0x24/0x38 [<807b6b50>] unregister_virtio_device+0x28/0x44 Fix this by restructuring the loops to allow the locks to only be taken where it is necessary to protect the vqs, and release it while the buffer is being freed. Fixes: c6017e793b93 ("virtio: console: add locks around buffer removal in port unplug path") Cc: stable@vger.kernel.org Signed-off-by: Matt Redfearn Signed-off-by: Michael S. Tsirkin --- drivers/char/virtio_console.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c index d433b1db1fdd..5649234b7316 100644 --- a/drivers/char/virtio_console.c +++ b/drivers/char/virtio_console.c @@ -1539,19 +1539,29 @@ static void remove_port_data(struct port *port) spin_lock_irq(&port->inbuf_lock); /* Remove unused data this port might have received. */ discard_port_data(port); + spin_unlock_irq(&port->inbuf_lock); /* Remove buffers we queued up for the Host to send us data in. */ - while ((buf = virtqueue_detach_unused_buf(port->in_vq))) - free_buf(buf, true); - spin_unlock_irq(&port->inbuf_lock); + do { + spin_lock_irq(&port->inbuf_lock); + buf = virtqueue_detach_unused_buf(port->in_vq); + spin_unlock_irq(&port->inbuf_lock); + if (buf) + free_buf(buf, true); + } while (buf); spin_lock_irq(&port->outvq_lock); reclaim_consumed_buffers(port); + spin_unlock_irq(&port->outvq_lock); /* Free pending buffers from the out-queue. */ - while ((buf = virtqueue_detach_unused_buf(port->out_vq))) - free_buf(buf, true); - spin_unlock_irq(&port->outvq_lock); + do { + spin_lock_irq(&port->outvq_lock); + buf = virtqueue_detach_unused_buf(port->out_vq); + spin_unlock_irq(&port->outvq_lock); + if (buf) + free_buf(buf, true); + } while (buf); } /* From 3dae2c6152fbbc6224343551158b61aad585cedf Mon Sep 17 00:00:00 2001 From: Juergen Gross Date: Tue, 11 Oct 2016 11:02:14 +0200 Subject: [PATCH 201/792] virtio: remove config.c Remove unused file config.c Signed-off-by: Juergen Gross Signed-off-by: Michael S. Tsirkin --- drivers/virtio/config.c | 12 ------------ 1 file changed, 12 deletions(-) delete mode 100644 drivers/virtio/config.c diff --git a/drivers/virtio/config.c b/drivers/virtio/config.c deleted file mode 100644 index f70bcd2ff98f..000000000000 --- a/drivers/virtio/config.c +++ /dev/null @@ -1,12 +0,0 @@ -/* Configuration space parsing helpers for virtio. - * - * The configuration is [type][len][... len bytes ...] fields. - * - * Copyright 2007 Rusty Russell, IBM Corporation. - * GPL v2 or later. - */ -#include -#include -#include -#include - From 668866b6e8dffa5583d8694f1d8ddd89a8bee745 Mon Sep 17 00:00:00 2001 From: Markus Elfring Date: Tue, 13 Sep 2016 11:32:22 +0200 Subject: [PATCH 202/792] virtio_blk: Use kmalloc_array() in init_vq() Multiplications for the size determination of memory allocations indicated that array data structures should be processed. Thus use the corresponding function "kmalloc_array". This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring Signed-off-by: Michael S. Tsirkin --- drivers/block/virtio_blk.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index 2dc5c96c186a..b2bc62b9fbe6 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -390,13 +390,13 @@ static int init_vq(struct virtio_blk *vblk) if (err) num_vqs = 1; - vblk->vqs = kmalloc(sizeof(*vblk->vqs) * num_vqs, GFP_KERNEL); + vblk->vqs = kmalloc_array(num_vqs, sizeof(*vblk->vqs), GFP_KERNEL); if (!vblk->vqs) return -ENOMEM; - names = kmalloc(sizeof(*names) * num_vqs, GFP_KERNEL); - callbacks = kmalloc(sizeof(*callbacks) * num_vqs, GFP_KERNEL); - vqs = kmalloc(sizeof(*vqs) * num_vqs, GFP_KERNEL); + names = kmalloc_array(num_vqs, sizeof(*names), GFP_KERNEL); + callbacks = kmalloc_array(num_vqs, sizeof(*callbacks), GFP_KERNEL); + vqs = kmalloc_array(num_vqs, sizeof(*vqs), GFP_KERNEL); if (!names || !callbacks || !vqs) { err = -ENOMEM; goto out; From 2ff98449ee883d6e7484f5937370df42d6789e07 Mon Sep 17 00:00:00 2001 From: Markus Elfring Date: Tue, 13 Sep 2016 13:43:50 +0200 Subject: [PATCH 203/792] virtio_blk: Delete an unnecessary initialisation in init_vq() The local variable "err" will be set to an appropriate value by a following statement. Thus omit the explicit initialisation at the beginning. Signed-off-by: Markus Elfring Signed-off-by: Michael S. Tsirkin --- drivers/block/virtio_blk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index b2bc62b9fbe6..5545a679abd8 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -376,7 +376,7 @@ static void virtblk_config_changed(struct virtio_device *vdev) static int init_vq(struct virtio_blk *vblk) { - int err = 0; + int err; int i; vq_callback_t **callbacks; const char **names; From 678ff27d25c62e3a25fa069914182a8a6391e121 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Sun, 14 Aug 2016 20:57:14 +0300 Subject: [PATCH 204/792] virtio/vhost: add Jason to list of maintainers Jason's been one of the mst active contributors to virtio and vhost, it will help to formalize this and list him as co-maintainer. Signed-off-by: Michael S. Tsirkin --- MAINTAINERS | 2 ++ 1 file changed, 2 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 3d838cf49f81..eee287e0b740 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -12780,6 +12780,7 @@ F: include/uapi/linux/virtio_console.h VIRTIO CORE, NET AND BLOCK DRIVERS M: "Michael S. Tsirkin" +M: Jason Wang L: virtualization@lists.linux-foundation.org S: Maintained F: Documentation/devicetree/bindings/virtio/ @@ -12810,6 +12811,7 @@ F: include/uapi/linux/virtio_gpu.h VIRTIO HOST (VHOST) M: "Michael S. Tsirkin" +M: Jason Wang L: kvm@vger.kernel.org L: virtualization@lists.linux-foundation.org L: netdev@vger.kernel.org From 75bfa81bf0897ba87f1e1b9b576a07536029b86a Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Mon, 31 Oct 2016 00:38:21 +0200 Subject: [PATCH 205/792] virtio_ring: mark vring_dma_dev inline This inline function is unused on configurations where dma_map/unmap are empty macros. Make the function inline to avoid gcc errors because of an unused static function. Signed-off-by: Michael S. Tsirkin --- drivers/virtio/virtio_ring.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c index 6b2cd922d322..489bfc61cf30 100644 --- a/drivers/virtio/virtio_ring.c +++ b/drivers/virtio/virtio_ring.c @@ -167,7 +167,7 @@ static bool vring_use_dma_api(struct virtio_device *vdev) * making all of the arch DMA ops work on the vring device itself * is a mess. For now, we use the parent device for DMA ops. */ -static struct device *vring_dma_dev(const struct vring_virtqueue *vq) +static inline struct device *vring_dma_dev(const struct vring_virtqueue *vq) { return vq->vq.vdev->dev.parent; } From b9a321b48af40e0606009df8aff0a8c65dfbbfd8 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Sun, 30 Oct 2016 19:28:27 -0400 Subject: [PATCH 206/792] r8152: Fix broken RX checksums. The r8152 driver has been broken since (approx) 3.16.xx when support was added for hardware RX checksums on newer chip versions. Symptoms include random segfaults and silent data corruption over NFS. The hardware checksum logig does not work on the VER_02 dongles I have here when used with a slow embedded system CPU. Google reveals others reporting similar issues on Raspberry Pi. So, disable hardware RX checksum support for VER_02, and fix an obvious coding error for IPV6 checksums in the same function. Because this bug results in silent data corruption, it is a good candidate for back-porting to -stable >= 3.16.xx. Signed-off-by: Mark Lord Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 44d439f50961..75c516889645 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -1730,7 +1730,7 @@ static u8 r8152_rx_csum(struct r8152 *tp, struct rx_desc *rx_desc) u8 checksum = CHECKSUM_NONE; u32 opts2, opts3; - if (tp->version == RTL_VER_01) + if (tp->version == RTL_VER_01 || tp->version == RTL_VER_02) goto return_result; opts2 = le32_to_cpu(rx_desc->opts2); @@ -1745,7 +1745,7 @@ static u8 r8152_rx_csum(struct r8152 *tp, struct rx_desc *rx_desc) checksum = CHECKSUM_NONE; else checksum = CHECKSUM_UNNECESSARY; - } else if (RD_IPV6_CS) { + } else if (opts2 & RD_IPV6_CS) { if ((opts2 & RD_UDP_CS) && !(opts3 & UDPF)) checksum = CHECKSUM_UNNECESSARY; else if ((opts2 & RD_TCP_CS) && !(opts3 & TCPF)) From 9b9d7cdd0a20a8c26a022604580f93516ad69c36 Mon Sep 17 00:00:00 2001 From: Vivek Gautam Date: Fri, 21 Oct 2016 16:21:07 +0530 Subject: [PATCH 207/792] usb: dwc3: Fix error handling for core init Fixing the sequence of events in dwc3_core_init() error exit path. dwc3_core_exit() call is also removed from the error path since, whatever it's doing is already done. Fixes: c499ff7 usb: dwc3: core: re-factor init and exit paths Cc: Felipe Balbi Cc: Greg KH Cc: Stable # 4.8+ Signed-off-by: Vivek Gautam Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/core.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 7287a763cd0c..fea446900cad 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -769,15 +769,14 @@ static int dwc3_core_init(struct dwc3 *dwc) return 0; err4: - phy_power_off(dwc->usb2_generic_phy); + phy_power_off(dwc->usb3_generic_phy); err3: - phy_power_off(dwc->usb3_generic_phy); + phy_power_off(dwc->usb2_generic_phy); err2: usb_phy_set_suspend(dwc->usb2_phy, 1); usb_phy_set_suspend(dwc->usb3_phy, 1); - dwc3_core_exit(dwc); err1: usb_phy_shutdown(dwc->usb2_phy); From 4accb8a1ee7d82f02bcbacba0e50995c531918d4 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Fri, 21 Oct 2016 15:23:59 +0300 Subject: [PATCH 208/792] usb: dwc3: st: add missing include dwc3-st uses pinctrl_pm_select_*_state() however it doesn't include the necessary header. Fix the build break caused by that, by simply including the missing header. Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/dwc3-st.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/dwc3/dwc3-st.c b/drivers/usb/dwc3/dwc3-st.c index 89a2f712fdfe..aaaf256f71dd 100644 --- a/drivers/usb/dwc3/dwc3-st.c +++ b/drivers/usb/dwc3/dwc3-st.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include "core.h" From c17c3cdff10b9f59ef1244a14604f10949f17117 Mon Sep 17 00:00:00 2001 From: Liping Zhang Date: Sat, 29 Oct 2016 22:03:05 +0800 Subject: [PATCH 209/792] netfilter: nf_tables: destroy the set if fail to add transaction When the memory is exhausted, then we will fail to add the NFT_MSG_NEWSET transaction. In such case, we should destroy the set before we free it. Fixes: 958bee14d071 ("netfilter: nf_tables: use new transaction infrastructure to handle sets") Signed-off-by: Liping Zhang Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_tables_api.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 365d31b86816..7d6a626b08f1 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -2956,12 +2956,14 @@ static int nf_tables_newset(struct net *net, struct sock *nlsk, err = nft_trans_set_add(&ctx, NFT_MSG_NEWSET, set); if (err < 0) - goto err2; + goto err3; list_add_tail_rcu(&set->list, &table->sets); table->use++; return 0; +err3: + ops->destroy(set); err2: kfree(set); err1: From b73b8a1ba598236296a46103d81c10d629d9a470 Mon Sep 17 00:00:00 2001 From: Liping Zhang Date: Sat, 29 Oct 2016 22:09:51 +0800 Subject: [PATCH 210/792] netfilter: nft_dup: do not use sreg_dev if the user doesn't specify it The NFTA_DUP_SREG_DEV attribute is not a must option, so we should use it in routing lookup only when the user specify it. Fixes: d877f07112f1 ("netfilter: nf_tables: add nft_dup expression") Signed-off-by: Liping Zhang Signed-off-by: Pablo Neira Ayuso --- net/ipv4/netfilter/nft_dup_ipv4.c | 6 ++++-- net/ipv6/netfilter/nft_dup_ipv6.c | 6 ++++-- 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/net/ipv4/netfilter/nft_dup_ipv4.c b/net/ipv4/netfilter/nft_dup_ipv4.c index bf855e64fc45..0c01a270bf9f 100644 --- a/net/ipv4/netfilter/nft_dup_ipv4.c +++ b/net/ipv4/netfilter/nft_dup_ipv4.c @@ -28,7 +28,7 @@ static void nft_dup_ipv4_eval(const struct nft_expr *expr, struct in_addr gw = { .s_addr = (__force __be32)regs->data[priv->sreg_addr], }; - int oif = regs->data[priv->sreg_dev]; + int oif = priv->sreg_dev ? regs->data[priv->sreg_dev] : -1; nf_dup_ipv4(pkt->net, pkt->skb, pkt->hook, &gw, oif); } @@ -59,7 +59,9 @@ static int nft_dup_ipv4_dump(struct sk_buff *skb, const struct nft_expr *expr) { struct nft_dup_ipv4 *priv = nft_expr_priv(expr); - if (nft_dump_register(skb, NFTA_DUP_SREG_ADDR, priv->sreg_addr) || + if (nft_dump_register(skb, NFTA_DUP_SREG_ADDR, priv->sreg_addr)) + goto nla_put_failure; + if (priv->sreg_dev && nft_dump_register(skb, NFTA_DUP_SREG_DEV, priv->sreg_dev)) goto nla_put_failure; diff --git a/net/ipv6/netfilter/nft_dup_ipv6.c b/net/ipv6/netfilter/nft_dup_ipv6.c index 8bfd470cbe72..831f86e1ec08 100644 --- a/net/ipv6/netfilter/nft_dup_ipv6.c +++ b/net/ipv6/netfilter/nft_dup_ipv6.c @@ -26,7 +26,7 @@ static void nft_dup_ipv6_eval(const struct nft_expr *expr, { struct nft_dup_ipv6 *priv = nft_expr_priv(expr); struct in6_addr *gw = (struct in6_addr *)®s->data[priv->sreg_addr]; - int oif = regs->data[priv->sreg_dev]; + int oif = priv->sreg_dev ? regs->data[priv->sreg_dev] : -1; nf_dup_ipv6(pkt->net, pkt->skb, pkt->hook, gw, oif); } @@ -57,7 +57,9 @@ static int nft_dup_ipv6_dump(struct sk_buff *skb, const struct nft_expr *expr) { struct nft_dup_ipv6 *priv = nft_expr_priv(expr); - if (nft_dump_register(skb, NFTA_DUP_SREG_ADDR, priv->sreg_addr) || + if (nft_dump_register(skb, NFTA_DUP_SREG_ADDR, priv->sreg_addr)) + goto nla_put_failure; + if (priv->sreg_dev && nft_dump_register(skb, NFTA_DUP_SREG_DEV, priv->sreg_dev)) goto nla_put_failure; From fd3220d37b1f6f0cab6142d98b0e6c4082e63299 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Mon, 31 Oct 2016 14:42:14 +0100 Subject: [PATCH 211/792] ovl: update S_ISGID when setting posix ACLs This change fixes xfstest generic/375, which failed to clear the setgid bit in the following test case on overlayfs: touch $testfile chown 100:100 $testfile chmod 2755 $testfile _runas -u 100 -g 101 -- setfacl -m u::rwx,g::rwx,o::rwx $testfile Reported-by: Amir Goldstein Signed-off-by: Miklos Szeredi Tested-by: Amir Goldstein Fixes: d837a49bd57f ("ovl: fix POSIX ACL setting") Cc: # v4.8 --- fs/overlayfs/super.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/fs/overlayfs/super.c b/fs/overlayfs/super.c index bcf3965be819..edd46a0e951d 100644 --- a/fs/overlayfs/super.c +++ b/fs/overlayfs/super.c @@ -1037,6 +1037,21 @@ ovl_posix_acl_xattr_set(const struct xattr_handler *handler, posix_acl_release(acl); + /* + * Check if sgid bit needs to be cleared (actual setacl operation will + * be done with mounter's capabilities and so that won't do it for us). + */ + if (unlikely(inode->i_mode & S_ISGID) && + handler->flags == ACL_TYPE_ACCESS && + !in_group_p(inode->i_gid) && + !capable_wrt_inode_uidgid(inode, CAP_FSETID)) { + struct iattr iattr = { .ia_valid = ATTR_KILL_SGID }; + + err = ovl_setattr(dentry, &iattr); + if (err) + return err; + } + err = ovl_xattr_set(dentry, handler->name, value, size, flags); if (!err) ovl_copyattr(ovl_inode_real(inode, NULL), inode); From b93d4a0eb308d4400b84c8b24c1b80e09a9497d0 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Mon, 31 Oct 2016 14:42:14 +0100 Subject: [PATCH 212/792] ovl: fix get_acl() on tmpfs tmpfs doesn't have ->get_acl() because it only uses cached acls. This fixes the acl tests in pjdfstest when tmpfs is used as the upper layer of the overlay. Reported-by: Amir Goldstein Signed-off-by: Miklos Szeredi Fixes: 39a25b2b3762 ("ovl: define ->get_acl() for overlay inodes") Cc: # v4.8 --- fs/overlayfs/inode.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/fs/overlayfs/inode.c b/fs/overlayfs/inode.c index c58f01babf30..7fb53d055537 100644 --- a/fs/overlayfs/inode.c +++ b/fs/overlayfs/inode.c @@ -270,9 +270,6 @@ struct posix_acl *ovl_get_acl(struct inode *inode, int type) if (!IS_ENABLED(CONFIG_FS_POSIX_ACL) || !IS_POSIXACL(realinode)) return NULL; - if (!realinode->i_op->get_acl) - return NULL; - old_cred = ovl_override_creds(inode->i_sb); acl = get_acl(realinode, type); revert_creds(old_cred); From 641089c1549d8d3df0b047b5de7e9a111362cdce Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Mon, 31 Oct 2016 14:42:14 +0100 Subject: [PATCH 213/792] ovl: fsync after copy-up Make sure the copied up file hits the disk before renaming to the final destination. If this is not done then the copy-up may corrupt the data in the file in case of a crash. Signed-off-by: Miklos Szeredi Cc: --- fs/overlayfs/copy_up.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/overlayfs/copy_up.c b/fs/overlayfs/copy_up.c index aeb60f791418..36795eed40b0 100644 --- a/fs/overlayfs/copy_up.c +++ b/fs/overlayfs/copy_up.c @@ -178,6 +178,8 @@ static int ovl_copy_up_data(struct path *old, struct path *new, loff_t len) len -= bytes; } + if (!error) + error = vfs_fsync(new_file, 0); fput(new_file); out_fput: fput(old_file); From c5f0627488be996e833038bdba01e45698ddaa26 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 11 Oct 2016 13:41:02 -0500 Subject: [PATCH 214/792] driver core: skip removal test for non-removable drivers Some drivers do not support removal/unbinding. These drivers should have drv->suppress_bind_attrs set to true, so use that to skip the removal test. This doesn't fix anything reported so far, but should prevent some other cases. Some drivers will need fixes to set suppress_bind_attrs to avoid this test. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=177021 Fixes: bea5b158ff0d ("driver core: add test of driver remove calls during probe") Reported-by: Laszlo Ersek Signed-off-by: Rob Herring Signed-off-by: Greg Kroah-Hartman --- drivers/base/dd.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/base/dd.c b/drivers/base/dd.c index d22a7260f42b..8937a7ad7165 100644 --- a/drivers/base/dd.c +++ b/drivers/base/dd.c @@ -324,7 +324,8 @@ static int really_probe(struct device *dev, struct device_driver *drv) { int ret = -EPROBE_DEFER; int local_trigger_count = atomic_read(&deferred_trigger_count); - bool test_remove = IS_ENABLED(CONFIG_DEBUG_TEST_DRIVER_REMOVE); + bool test_remove = IS_ENABLED(CONFIG_DEBUG_TEST_DRIVER_REMOVE) && + !drv->suppress_bind_attrs; if (defer_all_probes) { /* From bdacd1b426db83ac8ecf21aef1848120ffe53c07 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 11 Oct 2016 13:41:03 -0500 Subject: [PATCH 215/792] driver core: fix smatch warning on dev->bus check Commit d42a09802174 (driver core: skip removal test for non-removable drivers) introduced a smatch warning: drivers/base/dd.c:386 really_probe() warn: variable dereferenced before check 'dev->bus' (see line 373) Fix the warning by removing the dev->bus NULL check. dev->bus will never be NULL, so the check was unnecessary. Reported-by: Dan Carpenter Signed-off-by: Rob Herring Signed-off-by: Greg Kroah-Hartman --- drivers/base/dd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/base/dd.c b/drivers/base/dd.c index 8937a7ad7165..d76cd97a98b6 100644 --- a/drivers/base/dd.c +++ b/drivers/base/dd.c @@ -384,7 +384,7 @@ re_probe: if (test_remove) { test_remove = false; - if (dev->bus && dev->bus->remove) + if (dev->bus->remove) dev->bus->remove(dev); else if (drv->remove) drv->remove(dev); From 85915b63ad8b796848f431b66c9ba5e356e722e5 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Mon, 31 Oct 2016 14:42:09 +0800 Subject: [PATCH 216/792] ASoC: sun4i-codec: return error code instead of NULL when create_card fails When sun4i_codec_create_card fails, we do not assign a proper error code to the return value. The return value would be 0 from the previous function call, or we would have bailed out sooner. This would confuse the driver core into thinking the device probe succeeded, when in fact it didn't, leaving various devres based resources lingering. Make the create_card function pass back a meaningful error code, and assign it to the return value. Fixes: 45fb6b6f2aa3 ("ASoC: sunxi: add support for the on-chip codec on early Allwinner SoCs") Signed-off-by: Chen-Yu Tsai Signed-off-by: Mark Brown --- sound/soc/sunxi/sun4i-codec.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/sound/soc/sunxi/sun4i-codec.c b/sound/soc/sunxi/sun4i-codec.c index e047ec06d538..a60707761abf 100644 --- a/sound/soc/sunxi/sun4i-codec.c +++ b/sound/soc/sunxi/sun4i-codec.c @@ -765,11 +765,11 @@ static struct snd_soc_card *sun4i_codec_create_card(struct device *dev) card = devm_kzalloc(dev, sizeof(*card), GFP_KERNEL); if (!card) - return NULL; + return ERR_PTR(-ENOMEM); card->dai_link = sun4i_codec_create_link(dev, &card->num_links); if (!card->dai_link) - return NULL; + return ERR_PTR(-ENOMEM); card->dev = dev; card->name = "sun4i-codec"; @@ -876,7 +876,8 @@ static int sun4i_codec_probe(struct platform_device *pdev) } card = sun4i_codec_create_card(&pdev->dev); - if (!card) { + if (IS_ERR(card)) { + ret = PTR_ERR(card); dev_err(&pdev->dev, "Failed to create our card\n"); goto err_unregister_codec; } From 066f1f0b4719eb4573ef09bfc63c2bbb6f7676ca Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 31 Oct 2016 10:41:49 -0400 Subject: [PATCH 217/792] drm/radeon: disable runtime pm in certain cases MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If the platform does not support hybrid graphics or ATPX dGPU power control. bug: https://bugzilla.kernel.org/show_bug.cgi?id=51381 Acked-by: Christian König Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_device.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c index eb92aef46e3c..621af069a3d2 100644 --- a/drivers/gpu/drm/radeon/radeon_device.c +++ b/drivers/gpu/drm/radeon/radeon_device.c @@ -104,6 +104,14 @@ static const char radeon_family_name[][16] = { "LAST", }; +#if defined(CONFIG_VGA_SWITCHEROO) +bool radeon_has_atpx_dgpu_power_cntl(void); +bool radeon_is_atpx_hybrid(void); +#else +static inline bool radeon_has_atpx_dgpu_power_cntl(void) { return false; } +static inline bool radeon_is_atpx_hybrid(void) { return false; } +#endif + #define RADEON_PX_QUIRK_DISABLE_PX (1 << 0) #define RADEON_PX_QUIRK_LONG_WAKEUP (1 << 1) @@ -160,6 +168,11 @@ static void radeon_device_handle_px_quirks(struct radeon_device *rdev) if (rdev->px_quirk_flags & RADEON_PX_QUIRK_DISABLE_PX) rdev->flags &= ~RADEON_IS_PX; + + /* disable PX is the system doesn't support dGPU power control or hybrid gfx */ + if (!radeon_is_atpx_hybrid() && + !radeon_has_atpx_dgpu_power_cntl()) + rdev->flags &= ~RADEON_IS_PX; } /** From 84b1528e8cef55274f0df20e93513b3060ce495a Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 31 Oct 2016 11:02:31 -0400 Subject: [PATCH 218/792] drm/amdgpu: disable runtime pm in certain cases MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If the platform does not support hybrid graphics or ATPX dGPU power control. Acked-by: Christian König Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c index 203d98b00555..3938fca1ea8e 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c @@ -99,6 +99,8 @@ int amdgpu_driver_load_kms(struct drm_device *dev, unsigned long flags) if ((amdgpu_runtime_pm != 0) && amdgpu_has_atpx() && + (amdgpu_is_atpx_hybrid() || + amdgpu_has_atpx_dgpu_power_cntl()) && ((flags & AMD_IS_APU) == 0)) flags |= AMD_IS_PX; From 0a6e21056eaa859353945c4b164f3ef574d84271 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Mon, 31 Oct 2016 12:19:39 -0400 Subject: [PATCH 219/792] drm/radeon: Fix kernel panic on shutdown Since commit a481daa88fd4 ("drm/radeon: always apply pci shutdown callbacks"), a Dell Latitude D600 laptop has crashed on shutdown. The PCI Identification of the graphics adapter is "VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV250/M9 GL [Mobility FireGL 9000/Radeon 9000] [1002:4c66] (rev 01)". Prior to commit b0c80bd5d2e3 ("drm/radeon: fix up dp aux tear down (v2)"), I have no idea where the panic happened as the screen was blanked before the crash. Since that more recent change, the panic has been in routine radeon_connector_unregister(), and has been shown to be due to a NULL value in the ddc_bus member of struct drm_connector. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=178421 Fixes: a481daa88fd4 ("drm/radeon: always apply pci shutdown callbacks") Signed-off-by: Larry Finger Cc: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_connectors.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c index e18839d52e3e..27affbde058c 100644 --- a/drivers/gpu/drm/radeon/radeon_connectors.c +++ b/drivers/gpu/drm/radeon/radeon_connectors.c @@ -931,7 +931,7 @@ static void radeon_connector_unregister(struct drm_connector *connector) { struct radeon_connector *radeon_connector = to_radeon_connector(connector); - if (radeon_connector->ddc_bus->has_aux) { + if (radeon_connector->ddc_bus && radeon_connector->ddc_bus->has_aux) { drm_dp_aux_unregister(&radeon_connector->ddc_bus->aux); radeon_connector->ddc_bus->has_aux = false; } From 582ab27a063a506ccb55fc48afcc325342a2deba Mon Sep 17 00:00:00 2001 From: Alexander Usyskin Date: Mon, 31 Oct 2016 19:02:39 +0200 Subject: [PATCH 220/792] mei: bus: fix received data size check in NFC fixup NFC version reply size checked against only header size, not against full message size. That may lead potentially to uninitialized memory access in version data. That leads to warnings when version data is accessed: drivers/misc/mei/bus-fixup.c: warning: '*((void *)&ver+11)' may be used uninitialized in this function [-Wuninitialized]: => 212:2 Reported in Build regressions/improvements in v4.9-rc3 https://lkml.org/lkml/2016/10/30/57 Fixes: 59fcd7c63abf (mei: nfc: Initial nfc implementation) Signed-off-by: Alexander Usyskin Signed-off-by: Tomas Winkler Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/bus-fixup.c | 2 +- drivers/nfc/mei_phy.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/misc/mei/bus-fixup.c b/drivers/misc/mei/bus-fixup.c index e9e6ea3ab73c..75b9d4ac8b1e 100644 --- a/drivers/misc/mei/bus-fixup.c +++ b/drivers/misc/mei/bus-fixup.c @@ -178,7 +178,7 @@ static int mei_nfc_if_version(struct mei_cl *cl, ret = 0; bytes_recv = __mei_cl_recv(cl, (u8 *)reply, if_version_length); - if (bytes_recv < 0 || bytes_recv < sizeof(struct mei_nfc_reply)) { + if (bytes_recv < if_version_length) { dev_err(bus->dev, "Could not read IF version\n"); ret = -EIO; goto err; diff --git a/drivers/nfc/mei_phy.c b/drivers/nfc/mei_phy.c index 83deda4bb4d6..6f9563a96488 100644 --- a/drivers/nfc/mei_phy.c +++ b/drivers/nfc/mei_phy.c @@ -133,7 +133,7 @@ static int mei_nfc_if_version(struct nfc_mei_phy *phy) return -ENOMEM; bytes_recv = mei_cldev_recv(phy->cldev, (u8 *)reply, if_version_length); - if (bytes_recv < 0 || bytes_recv < sizeof(struct mei_nfc_reply)) { + if (bytes_recv < 0 || bytes_recv < if_version_length) { pr_err("Could not read IF version\n"); r = -EIO; goto err; From eef2b41122425dbddd16d70371bd000f601161d6 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 31 Oct 2016 12:27:52 -0400 Subject: [PATCH 221/792] drm/amdgpu: make sure ddc_bus is valid in connector unregister This should only happen on boards TV connectors which do not have a ddc bus for those connectors. None of the asics supported by amdgpu support tv, so we shouldn't hit this, but check to be on the safe side (e.g., bios bug for example). Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c index e3281d4e3e41..086aa5c9c634 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_connectors.c @@ -769,7 +769,7 @@ static void amdgpu_connector_unregister(struct drm_connector *connector) { struct amdgpu_connector *amdgpu_connector = to_amdgpu_connector(connector); - if (amdgpu_connector->ddc_bus->has_aux) { + if (amdgpu_connector->ddc_bus && amdgpu_connector->ddc_bus->has_aux) { drm_dp_aux_unregister(&amdgpu_connector->ddc_bus->aux); amdgpu_connector->ddc_bus->has_aux = false; } From 91efdb2718e0c5ff014f0cf98cac99f088a9a4d2 Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Sat, 29 Oct 2016 23:32:44 +0300 Subject: [PATCH 222/792] drm/amd/powerplay: don't succeed in getters if fan is missing Otherwise callers end up using uninitialized data. Reviewed-by: Edward O'Callaghan Signed-off-by: Grazvydas Ignotas Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/smu7_thermal.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_thermal.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_thermal.c index fb6c6f6106d5..29d0319b22e6 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_thermal.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_thermal.c @@ -30,7 +30,7 @@ int smu7_fan_ctrl_get_fan_speed_info(struct pp_hwmgr *hwmgr, struct phm_fan_speed_info *fan_speed_info) { if (hwmgr->thermal_controller.fanInfo.bNoFan) - return 0; + return -ENODEV; fan_speed_info->supports_percent_read = true; fan_speed_info->supports_percent_write = true; @@ -60,7 +60,7 @@ int smu7_fan_ctrl_get_fan_speed_percent(struct pp_hwmgr *hwmgr, uint64_t tmp64; if (hwmgr->thermal_controller.fanInfo.bNoFan) - return 0; + return -ENODEV; duty100 = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_FDO_CTRL1, FMAX_DUTY100); @@ -89,7 +89,7 @@ int smu7_fan_ctrl_get_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t *speed) if (hwmgr->thermal_controller.fanInfo.bNoFan || (hwmgr->thermal_controller.fanInfo. ucTachometerPulsesPerRevolution == 0)) - return 0; + return -ENODEV; tach_period = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_TACH_STATUS, TACH_PERIOD); From c24784f01549ecdf23fc00d0588423bcf8956714 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Fri, 28 Oct 2016 17:04:07 +0200 Subject: [PATCH 223/792] drm/amd: fix scheduler fence teardown order v2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Some fences might be alive even after we have stopped the scheduler leading to warnings about leaked objects from the SLUB allocator. Fix this by allocating/freeing the SLUB allocator from the module init/fini functions just like we do it for hw fences. v2: make variable static, add link to bug Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=97500 Reported-by: Grazvydas Ignotas Signed-off-by: Christian König Reviewed-by: Alex Deucher (v1) Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 2 ++ drivers/gpu/drm/amd/scheduler/gpu_scheduler.c | 13 ------------- drivers/gpu/drm/amd/scheduler/gpu_scheduler.h | 6 +++--- drivers/gpu/drm/amd/scheduler/sched_fence.c | 19 +++++++++++++++++++ 4 files changed, 24 insertions(+), 16 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c index 71ed27eb3dde..73f2415630f8 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c @@ -737,6 +737,7 @@ static int __init amdgpu_init(void) { amdgpu_sync_init(); amdgpu_fence_slab_init(); + amd_sched_fence_slab_init(); if (vgacon_text_force()) { DRM_ERROR("VGACON disables amdgpu kernel modesetting.\n"); return -EINVAL; @@ -756,6 +757,7 @@ static void __exit amdgpu_exit(void) drm_pci_exit(driver, pdriver); amdgpu_unregister_atpx_handler(); amdgpu_sync_fini(); + amd_sched_fence_slab_fini(); amdgpu_fence_slab_fini(); } diff --git a/drivers/gpu/drm/amd/scheduler/gpu_scheduler.c b/drivers/gpu/drm/amd/scheduler/gpu_scheduler.c index 910b8d5b21c5..ffe1f85ce300 100644 --- a/drivers/gpu/drm/amd/scheduler/gpu_scheduler.c +++ b/drivers/gpu/drm/amd/scheduler/gpu_scheduler.c @@ -34,9 +34,6 @@ static bool amd_sched_entity_is_ready(struct amd_sched_entity *entity); static void amd_sched_wakeup(struct amd_gpu_scheduler *sched); static void amd_sched_process_job(struct fence *f, struct fence_cb *cb); -struct kmem_cache *sched_fence_slab; -atomic_t sched_fence_slab_ref = ATOMIC_INIT(0); - /* Initialize a given run queue struct */ static void amd_sched_rq_init(struct amd_sched_rq *rq) { @@ -618,13 +615,6 @@ int amd_sched_init(struct amd_gpu_scheduler *sched, INIT_LIST_HEAD(&sched->ring_mirror_list); spin_lock_init(&sched->job_list_lock); atomic_set(&sched->hw_rq_count, 0); - if (atomic_inc_return(&sched_fence_slab_ref) == 1) { - sched_fence_slab = kmem_cache_create( - "amd_sched_fence", sizeof(struct amd_sched_fence), 0, - SLAB_HWCACHE_ALIGN, NULL); - if (!sched_fence_slab) - return -ENOMEM; - } /* Each scheduler will run on a seperate kernel thread */ sched->thread = kthread_run(amd_sched_main, sched, sched->name); @@ -645,7 +635,4 @@ void amd_sched_fini(struct amd_gpu_scheduler *sched) { if (sched->thread) kthread_stop(sched->thread); - rcu_barrier(); - if (atomic_dec_and_test(&sched_fence_slab_ref)) - kmem_cache_destroy(sched_fence_slab); } diff --git a/drivers/gpu/drm/amd/scheduler/gpu_scheduler.h b/drivers/gpu/drm/amd/scheduler/gpu_scheduler.h index 7cbbbfb502ef..51068e6c3d9a 100644 --- a/drivers/gpu/drm/amd/scheduler/gpu_scheduler.h +++ b/drivers/gpu/drm/amd/scheduler/gpu_scheduler.h @@ -30,9 +30,6 @@ struct amd_gpu_scheduler; struct amd_sched_rq; -extern struct kmem_cache *sched_fence_slab; -extern atomic_t sched_fence_slab_ref; - /** * A scheduler entity is a wrapper around a job queue or a group * of other entities. Entities take turns emitting jobs from their @@ -145,6 +142,9 @@ void amd_sched_entity_fini(struct amd_gpu_scheduler *sched, struct amd_sched_entity *entity); void amd_sched_entity_push_job(struct amd_sched_job *sched_job); +int amd_sched_fence_slab_init(void); +void amd_sched_fence_slab_fini(void); + struct amd_sched_fence *amd_sched_fence_create( struct amd_sched_entity *s_entity, void *owner); void amd_sched_fence_scheduled(struct amd_sched_fence *fence); diff --git a/drivers/gpu/drm/amd/scheduler/sched_fence.c b/drivers/gpu/drm/amd/scheduler/sched_fence.c index 3653b5a40494..88fc2d662579 100644 --- a/drivers/gpu/drm/amd/scheduler/sched_fence.c +++ b/drivers/gpu/drm/amd/scheduler/sched_fence.c @@ -27,6 +27,25 @@ #include #include "gpu_scheduler.h" +static struct kmem_cache *sched_fence_slab; + +int amd_sched_fence_slab_init(void) +{ + sched_fence_slab = kmem_cache_create( + "amd_sched_fence", sizeof(struct amd_sched_fence), 0, + SLAB_HWCACHE_ALIGN, NULL); + if (!sched_fence_slab) + return -ENOMEM; + + return 0; +} + +void amd_sched_fence_slab_fini(void) +{ + rcu_barrier(); + kmem_cache_destroy(sched_fence_slab); +} + struct amd_sched_fence *amd_sched_fence_create(struct amd_sched_entity *entity, void *owner) { From 245ae5e915853ced749eb47a343749cf0a9c4109 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Fri, 28 Oct 2016 17:39:08 +0200 Subject: [PATCH 224/792] drm/amdgpu: add some error handling to amdgpu_init v2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Just to be clean should we ever run into -ENOMEM during module init. v2: fix typo in commit message Signed-off-by: Christian König Reviewed-by: Alex Deucher (v1) Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 26 ++++++++++++++++++++++--- 1 file changed, 23 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c index 73f2415630f8..02ff0747197c 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c @@ -735,9 +735,20 @@ static struct pci_driver amdgpu_kms_pci_driver = { static int __init amdgpu_init(void) { - amdgpu_sync_init(); - amdgpu_fence_slab_init(); - amd_sched_fence_slab_init(); + int r; + + r = amdgpu_sync_init(); + if (r) + goto error_sync; + + r = amdgpu_fence_slab_init(); + if (r) + goto error_fence; + + r = amd_sched_fence_slab_init(); + if (r) + goto error_sched; + if (vgacon_text_force()) { DRM_ERROR("VGACON disables amdgpu kernel modesetting.\n"); return -EINVAL; @@ -749,6 +760,15 @@ static int __init amdgpu_init(void) amdgpu_register_atpx_handler(); /* let modprobe override vga console setting */ return drm_pci_init(driver, pdriver); + +error_sched: + amdgpu_fence_slab_fini(); + +error_fence: + amdgpu_sync_fini(); + +error_sync: + return r; } static void __exit amdgpu_exit(void) From f89c56ce710afa65e1b2ead555b52c4807f34ff7 Mon Sep 17 00:00:00 2001 From: Jakub Sitnicki Date: Wed, 26 Oct 2016 11:21:14 +0200 Subject: [PATCH 225/792] ipv6: Don't use ufo handling on later transformed packets Similar to commit c146066ab802 ("ipv4: Don't use ufo handling on later transformed packets"), don't perform UFO on packets that will be IPsec transformed. To detect it we rely on the fact that headerlen in dst_entry is non-zero only for transformation bundles (xfrm_dst objects). Unwanted segmentation can be observed with a NETIF_F_UFO capable device, such as a dummy device: DEV=dum0 LEN=1493 ip li add $DEV type dummy ip addr add fc00::1/64 dev $DEV nodad ip link set $DEV up ip xfrm policy add dir out src fc00::1 dst fc00::2 \ tmpl src fc00::1 dst fc00::2 proto esp spi 1 ip xfrm state add src fc00::1 dst fc00::2 \ proto esp spi 1 enc 'aes' 0x0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b0b tcpdump -n -nn -i $DEV -t & socat /dev/zero,readbytes=$LEN udp6:[fc00::2]:$LEN tcpdump output before: IP6 fc00::1 > fc00::2: frag (0|1448) ESP(spi=0x00000001,seq=0x1), length 1448 IP6 fc00::1 > fc00::2: frag (1448|48) IP6 fc00::1 > fc00::2: ESP(spi=0x00000001,seq=0x2), length 88 ... and after: IP6 fc00::1 > fc00::2: frag (0|1448) ESP(spi=0x00000001,seq=0x1), length 1448 IP6 fc00::1 > fc00::2: frag (1448|80) Fixes: e89e9cf539a2 ("[IPv4/IPv6]: UFO Scatter-gather approach") Signed-off-by: Jakub Sitnicki Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller --- net/ipv6/ip6_output.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index 6001e781164e..59eb4ed99ce8 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -1366,7 +1366,7 @@ emsgsize: if (((length > mtu) || (skb && skb_is_gso(skb))) && (sk->sk_protocol == IPPROTO_UDP) && - (rt->dst.dev->features & NETIF_F_UFO) && + (rt->dst.dev->features & NETIF_F_UFO) && !rt->dst.header_len && (sk->sk_type == SOCK_DGRAM) && !udp_get_no_check6_tx(sk)) { err = ip6_ufo_append_data(sk, queue, getfrag, from, length, hh_len, fragheaderlen, exthdrlen, From da7389ac6c83e7aa8b04ebe5ba546df2a7873c5c Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Mon, 31 Oct 2016 10:40:13 -0700 Subject: [PATCH 226/792] gcc-plugins: Export symbols needed by gcc This explicitly exports symbols that gcc expects from plugins. Based on code from Emese Revfy. Signed-off-by: Kees Cook --- scripts/gcc-plugins/cyc_complexity_plugin.c | 4 ++-- scripts/gcc-plugins/gcc-common.h | 1 + scripts/gcc-plugins/latent_entropy_plugin.c | 6 +++--- scripts/gcc-plugins/sancov_plugin.c | 4 ++-- 4 files changed, 8 insertions(+), 7 deletions(-) diff --git a/scripts/gcc-plugins/cyc_complexity_plugin.c b/scripts/gcc-plugins/cyc_complexity_plugin.c index 34df974c6ba3..8af7db06122d 100644 --- a/scripts/gcc-plugins/cyc_complexity_plugin.c +++ b/scripts/gcc-plugins/cyc_complexity_plugin.c @@ -20,7 +20,7 @@ #include "gcc-common.h" -int plugin_is_GPL_compatible; +__visible int plugin_is_GPL_compatible; static struct plugin_info cyc_complexity_plugin_info = { .version = "20160225", @@ -49,7 +49,7 @@ static unsigned int cyc_complexity_execute(void) #include "gcc-generate-gimple-pass.h" -int plugin_init(struct plugin_name_args *plugin_info, struct plugin_gcc_version *version) +__visible int plugin_init(struct plugin_name_args *plugin_info, struct plugin_gcc_version *version) { const char * const plugin_name = plugin_info->base_name; struct register_pass_info cyc_complexity_pass_info; diff --git a/scripts/gcc-plugins/gcc-common.h b/scripts/gcc-plugins/gcc-common.h index 172850bcd0d9..950fd2e64bb7 100644 --- a/scripts/gcc-plugins/gcc-common.h +++ b/scripts/gcc-plugins/gcc-common.h @@ -130,6 +130,7 @@ extern void dump_gimple_stmt(pretty_printer *, gimple, int, int); #endif #define __unused __attribute__((__unused__)) +#define __visible __attribute__((visibility("default"))) #define DECL_NAME_POINTER(node) IDENTIFIER_POINTER(DECL_NAME(node)) #define DECL_NAME_LENGTH(node) IDENTIFIER_LENGTH(DECL_NAME(node)) diff --git a/scripts/gcc-plugins/latent_entropy_plugin.c b/scripts/gcc-plugins/latent_entropy_plugin.c index ff1939b804ae..9d3d4adf3be8 100644 --- a/scripts/gcc-plugins/latent_entropy_plugin.c +++ b/scripts/gcc-plugins/latent_entropy_plugin.c @@ -77,7 +77,7 @@ #include "gcc-common.h" -int plugin_is_GPL_compatible; +__visible int plugin_is_GPL_compatible; static GTY(()) tree latent_entropy_decl; @@ -584,8 +584,8 @@ static void latent_entropy_start_unit(void *gcc_data __unused, | TODO_update_ssa #include "gcc-generate-gimple-pass.h" -int plugin_init(struct plugin_name_args *plugin_info, - struct plugin_gcc_version *version) +__visible int plugin_init(struct plugin_name_args *plugin_info, + struct plugin_gcc_version *version) { bool enabled = true; const char * const plugin_name = plugin_info->base_name; diff --git a/scripts/gcc-plugins/sancov_plugin.c b/scripts/gcc-plugins/sancov_plugin.c index aedd6113cb73..7ea0b3f50739 100644 --- a/scripts/gcc-plugins/sancov_plugin.c +++ b/scripts/gcc-plugins/sancov_plugin.c @@ -21,7 +21,7 @@ #include "gcc-common.h" -int plugin_is_GPL_compatible; +__visible int plugin_is_GPL_compatible; tree sancov_fndecl; @@ -86,7 +86,7 @@ static void sancov_start_unit(void __unused *gcc_data, void __unused *user_data) #endif } -int plugin_init(struct plugin_name_args *plugin_info, struct plugin_gcc_version *version) +__visible int plugin_init(struct plugin_name_args *plugin_info, struct plugin_gcc_version *version) { int i; struct register_pass_info sancov_plugin_pass_info; From 19bda36c4299ce3d7e5bce10bebe01764a655a6d Mon Sep 17 00:00:00 2001 From: Xin Long Date: Fri, 28 Oct 2016 18:18:01 +0800 Subject: [PATCH 227/792] ipv6: add mtu lock check in __ip6_rt_update_pmtu Prior to this patch, ipv6 didn't do mtu lock check in ip6_update_pmtu. It leaded to that mtu lock doesn't really work when receiving the pkt of ICMPV6_PKT_TOOBIG. This patch is to add mtu lock check in __ip6_rt_update_pmtu just as ipv4 did in __ip_rt_update_pmtu. Acked-by: Hannes Frederic Sowa Signed-off-by: Xin Long Signed-off-by: David S. Miller --- net/ipv6/route.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 947ed1ded026..7403d90dcb38 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -1364,6 +1364,9 @@ static void __ip6_rt_update_pmtu(struct dst_entry *dst, const struct sock *sk, if (rt6->rt6i_flags & RTF_LOCAL) return; + if (dst_metric_locked(dst, RTAX_MTU)) + return; + dst_confirm(dst); mtu = max_t(u32, mtu, IPV6_MIN_MTU); if (mtu >= dst_mtu(dst)) From 022d00ee0b55e6cd49048acadb9bf76c37e538d8 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Mon, 31 Oct 2016 11:25:43 +0000 Subject: [PATCH 228/792] ASoC: lpass-platform: Fix broken pcm data usage This patch fixes lpass-platform driver which was broken in v4.9-rc1. lpass_pcm_data data structure holds information specific to stream. Holding a single private pointer to it in global lpass_data will not work, because it would be overwritten by for each pcm instance. This code was breaking playback when we have both playback and capture pcm streams, as playback settings are over written by capture settings. Fix this by moving channel allocation logic out of pcm_new to pcm_open so that we can store the stream specific information in private_data of snd_pcm_runtime. Fixes: 6adcbdcd4b6e ("ASoC: lpass-platform: don't use snd_soc_pcm_set_drvdata()") Signed-off-by: Srinivas Kandagatla Signed-off-by: Mark Brown --- sound/soc/qcom/lpass-platform.c | 165 +++++++++++++++----------------- sound/soc/qcom/lpass.h | 1 - 2 files changed, 79 insertions(+), 87 deletions(-) diff --git a/sound/soc/qcom/lpass-platform.c b/sound/soc/qcom/lpass-platform.c index e2ff538a8aa5..07000f53db44 100644 --- a/sound/soc/qcom/lpass-platform.c +++ b/sound/soc/qcom/lpass-platform.c @@ -61,7 +61,40 @@ static int lpass_platform_pcmops_open(struct snd_pcm_substream *substream) { struct snd_pcm_runtime *runtime = substream->runtime; struct snd_soc_pcm_runtime *soc_runtime = substream->private_data; - int ret; + struct snd_soc_dai *cpu_dai = soc_runtime->cpu_dai; + struct lpass_data *drvdata = + snd_soc_platform_get_drvdata(soc_runtime->platform); + struct lpass_variant *v = drvdata->variant; + int ret, dma_ch, dir = substream->stream; + struct lpass_pcm_data *data; + + data = devm_kzalloc(soc_runtime->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->i2s_port = cpu_dai->driver->id; + runtime->private_data = data; + + if (v->alloc_dma_channel) + dma_ch = v->alloc_dma_channel(drvdata, dir); + if (dma_ch < 0) + return dma_ch; + + drvdata->substream[dma_ch] = substream; + + ret = regmap_write(drvdata->lpaif_map, + LPAIF_DMACTL_REG(v, dma_ch, dir), 0); + if (ret) { + dev_err(soc_runtime->dev, + "%s() error writing to rdmactl reg: %d\n", + __func__, ret); + return ret; + } + + if (dir == SNDRV_PCM_STREAM_PLAYBACK) + data->rdma_ch = dma_ch; + else + data->wrdma_ch = dma_ch; snd_soc_set_runtime_hwparams(substream, &lpass_platform_pcm_hardware); @@ -80,13 +113,40 @@ static int lpass_platform_pcmops_open(struct snd_pcm_substream *substream) return 0; } +static int lpass_platform_pcmops_close(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct snd_soc_pcm_runtime *soc_runtime = substream->private_data; + struct lpass_data *drvdata = + snd_soc_platform_get_drvdata(soc_runtime->platform); + struct lpass_variant *v = drvdata->variant; + struct lpass_pcm_data *data; + int dma_ch, dir = substream->stream; + + data = runtime->private_data; + v = drvdata->variant; + + if (dir == SNDRV_PCM_STREAM_PLAYBACK) + dma_ch = data->rdma_ch; + else + dma_ch = data->wrdma_ch; + + drvdata->substream[dma_ch] = NULL; + + if (v->free_dma_channel) + v->free_dma_channel(drvdata, dma_ch); + + return 0; +} + static int lpass_platform_pcmops_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) { struct snd_soc_pcm_runtime *soc_runtime = substream->private_data; struct lpass_data *drvdata = snd_soc_platform_get_drvdata(soc_runtime->platform); - struct lpass_pcm_data *pcm_data = drvdata->private_data; + struct snd_pcm_runtime *rt = substream->runtime; + struct lpass_pcm_data *pcm_data = rt->private_data; struct lpass_variant *v = drvdata->variant; snd_pcm_format_t format = params_format(params); unsigned int channels = params_channels(params); @@ -179,7 +239,8 @@ static int lpass_platform_pcmops_hw_free(struct snd_pcm_substream *substream) struct snd_soc_pcm_runtime *soc_runtime = substream->private_data; struct lpass_data *drvdata = snd_soc_platform_get_drvdata(soc_runtime->platform); - struct lpass_pcm_data *pcm_data = drvdata->private_data; + struct snd_pcm_runtime *rt = substream->runtime; + struct lpass_pcm_data *pcm_data = rt->private_data; struct lpass_variant *v = drvdata->variant; unsigned int reg; int ret; @@ -203,7 +264,8 @@ static int lpass_platform_pcmops_prepare(struct snd_pcm_substream *substream) struct snd_soc_pcm_runtime *soc_runtime = substream->private_data; struct lpass_data *drvdata = snd_soc_platform_get_drvdata(soc_runtime->platform); - struct lpass_pcm_data *pcm_data = drvdata->private_data; + struct snd_pcm_runtime *rt = substream->runtime; + struct lpass_pcm_data *pcm_data = rt->private_data; struct lpass_variant *v = drvdata->variant; int ret, ch, dir = substream->stream; @@ -257,7 +319,8 @@ static int lpass_platform_pcmops_trigger(struct snd_pcm_substream *substream, struct snd_soc_pcm_runtime *soc_runtime = substream->private_data; struct lpass_data *drvdata = snd_soc_platform_get_drvdata(soc_runtime->platform); - struct lpass_pcm_data *pcm_data = drvdata->private_data; + struct snd_pcm_runtime *rt = substream->runtime; + struct lpass_pcm_data *pcm_data = rt->private_data; struct lpass_variant *v = drvdata->variant; int ret, ch, dir = substream->stream; @@ -333,7 +396,8 @@ static snd_pcm_uframes_t lpass_platform_pcmops_pointer( struct snd_soc_pcm_runtime *soc_runtime = substream->private_data; struct lpass_data *drvdata = snd_soc_platform_get_drvdata(soc_runtime->platform); - struct lpass_pcm_data *pcm_data = drvdata->private_data; + struct snd_pcm_runtime *rt = substream->runtime; + struct lpass_pcm_data *pcm_data = rt->private_data; struct lpass_variant *v = drvdata->variant; unsigned int base_addr, curr_addr; int ret, ch, dir = substream->stream; @@ -374,6 +438,7 @@ static int lpass_platform_pcmops_mmap(struct snd_pcm_substream *substream, static const struct snd_pcm_ops lpass_platform_pcm_ops = { .open = lpass_platform_pcmops_open, + .close = lpass_platform_pcmops_close, .ioctl = snd_pcm_lib_ioctl, .hw_params = lpass_platform_pcmops_hw_params, .hw_free = lpass_platform_pcmops_hw_free, @@ -470,117 +535,45 @@ static int lpass_platform_pcm_new(struct snd_soc_pcm_runtime *soc_runtime) { struct snd_pcm *pcm = soc_runtime->pcm; struct snd_pcm_substream *psubstream, *csubstream; - struct snd_soc_dai *cpu_dai = soc_runtime->cpu_dai; - struct lpass_data *drvdata = - snd_soc_platform_get_drvdata(soc_runtime->platform); - struct lpass_variant *v = drvdata->variant; int ret = -EINVAL; - struct lpass_pcm_data *data; size_t size = lpass_platform_pcm_hardware.buffer_bytes_max; - data = devm_kzalloc(soc_runtime->dev, sizeof(*data), GFP_KERNEL); - if (!data) - return -ENOMEM; - - data->i2s_port = cpu_dai->driver->id; - drvdata->private_data = data; - psubstream = pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream; if (psubstream) { - if (v->alloc_dma_channel) - data->rdma_ch = v->alloc_dma_channel(drvdata, - SNDRV_PCM_STREAM_PLAYBACK); - - if (data->rdma_ch < 0) - return data->rdma_ch; - - drvdata->substream[data->rdma_ch] = psubstream; - ret = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, soc_runtime->platform->dev, size, &psubstream->dma_buffer); - if (ret) - goto playback_alloc_err; - - ret = regmap_write(drvdata->lpaif_map, - LPAIF_RDMACTL_REG(v, data->rdma_ch), 0); if (ret) { - dev_err(soc_runtime->dev, - "%s() error writing to rdmactl reg: %d\n", - __func__, ret); - goto capture_alloc_err; + dev_err(soc_runtime->dev, "Cannot allocate buffer(s)\n"); + return ret; } } csubstream = pcm->streams[SNDRV_PCM_STREAM_CAPTURE].substream; if (csubstream) { - if (v->alloc_dma_channel) - data->wrdma_ch = v->alloc_dma_channel(drvdata, - SNDRV_PCM_STREAM_CAPTURE); - - if (data->wrdma_ch < 0) { - ret = data->wrdma_ch; - goto capture_alloc_err; - } - - drvdata->substream[data->wrdma_ch] = csubstream; - ret = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, soc_runtime->platform->dev, size, &csubstream->dma_buffer); - if (ret) - goto capture_alloc_err; - - ret = regmap_write(drvdata->lpaif_map, - LPAIF_WRDMACTL_REG(v, data->wrdma_ch), 0); if (ret) { - dev_err(soc_runtime->dev, - "%s() error writing to wrdmactl reg: %d\n", - __func__, ret); - goto capture_reg_err; + dev_err(soc_runtime->dev, "Cannot allocate buffer(s)\n"); + if (psubstream) + snd_dma_free_pages(&psubstream->dma_buffer); + return ret; } + } return 0; - -capture_reg_err: - if (csubstream) - snd_dma_free_pages(&csubstream->dma_buffer); - -capture_alloc_err: - if (psubstream) - snd_dma_free_pages(&psubstream->dma_buffer); - - playback_alloc_err: - dev_err(soc_runtime->dev, "Cannot allocate buffer(s)\n"); - - return ret; } static void lpass_platform_pcm_free(struct snd_pcm *pcm) { - struct snd_soc_pcm_runtime *rt; - struct lpass_data *drvdata; - struct lpass_pcm_data *data; - struct lpass_variant *v; struct snd_pcm_substream *substream; - int ch, i; + int i; for (i = 0; i < ARRAY_SIZE(pcm->streams); i++) { substream = pcm->streams[i].substream; if (substream) { - rt = substream->private_data; - drvdata = snd_soc_platform_get_drvdata(rt->platform); - data = drvdata->private_data; - - ch = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) - ? data->rdma_ch - : data->wrdma_ch; - v = drvdata->variant; - drvdata->substream[ch] = NULL; - if (v->free_dma_channel) - v->free_dma_channel(drvdata, ch); - snd_dma_free_pages(&substream->dma_buffer); substream->dma_buffer.area = NULL; substream->dma_buffer.addr = 0; diff --git a/sound/soc/qcom/lpass.h b/sound/soc/qcom/lpass.h index 35b3cea8207d..924971b6ded5 100644 --- a/sound/soc/qcom/lpass.h +++ b/sound/soc/qcom/lpass.h @@ -59,7 +59,6 @@ struct lpass_data { struct clk *pcnoc_mport_clk; struct clk *pcnoc_sway_clk; - void *private_data; }; /* Vairant data per each SOC */ From 94201798dbce1cfd242407f1f422819a735c838f Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Mon, 31 Oct 2016 11:25:45 +0000 Subject: [PATCH 229/792] ASoC: lpass-cpu: add module licence and description This patch adds module licence to lpass-cpu driver, without this patch lpass-cpu module would taint with below error: snd_soc_lpass_cpu: module license 'unspecified' taints kernel. Disabling lock debugging due to kernel taint snd_soc_lpass_cpu: Unknown symbol regmap_write (err 0) snd_soc_lpass_cpu: Unknown symbol devm_kmalloc (err 0) ... Signed-off-by: Srinivas Kandagatla Acked-by: Kenneth Westfield Signed-off-by: Mark Brown --- sound/soc/qcom/lpass-cpu.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/soc/qcom/lpass-cpu.c b/sound/soc/qcom/lpass-cpu.c index 3cde9fb977fa..eff3f9a8b685 100644 --- a/sound/soc/qcom/lpass-cpu.c +++ b/sound/soc/qcom/lpass-cpu.c @@ -586,3 +586,6 @@ int asoc_qcom_lpass_cpu_platform_remove(struct platform_device *pdev) return 0; } EXPORT_SYMBOL_GPL(asoc_qcom_lpass_cpu_platform_remove); + +MODULE_DESCRIPTION("QTi LPASS CPU Driver"); +MODULE_LICENSE("GPL v2"); From 58bea4144d235cee5bb51203b032ddafd6d1cf8d Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Wed, 19 Oct 2016 00:08:04 +0200 Subject: [PATCH 230/792] latent_entropy: Fix wrong gcc code generation with 64 bit variables The stack frame size could grow too large when the plugin used long long on 32-bit architectures when the given function had too many basic blocks. The gcc warning was: drivers/pci/hotplug/ibmphp_ebda.c: In function 'ibmphp_access_ebda': drivers/pci/hotplug/ibmphp_ebda.c:409:1: warning: the frame size of 1108 bytes is larger than 1024 bytes [-Wframe-larger-than=] This switches latent_entropy from u64 to unsigned long. Thanks to PaX Team and Emese Revfy for the patch. Signed-off-by: Kees Cook --- mm/page_alloc.c | 2 +- scripts/gcc-plugins/latent_entropy_plugin.c | 19 +++++++++---------- 2 files changed, 10 insertions(+), 11 deletions(-) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 2b3bf6767d54..1b10c14de5db 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -92,7 +92,7 @@ int _node_numa_mem_[MAX_NUMNODES]; #endif #ifdef CONFIG_GCC_PLUGIN_LATENT_ENTROPY -volatile u64 latent_entropy __latent_entropy; +volatile unsigned long latent_entropy __latent_entropy; EXPORT_SYMBOL(latent_entropy); #endif diff --git a/scripts/gcc-plugins/latent_entropy_plugin.c b/scripts/gcc-plugins/latent_entropy_plugin.c index 9d3d4adf3be8..8160f1c1b56e 100644 --- a/scripts/gcc-plugins/latent_entropy_plugin.c +++ b/scripts/gcc-plugins/latent_entropy_plugin.c @@ -340,7 +340,7 @@ static enum tree_code get_op(tree *rhs) break; } if (rhs) - *rhs = build_int_cstu(unsigned_intDI_type_node, random_const); + *rhs = build_int_cstu(long_unsigned_type_node, random_const); return op; } @@ -372,7 +372,7 @@ static void __perturb_latent_entropy(gimple_stmt_iterator *gsi, enum tree_code op; /* 1. create temporary copy of latent_entropy */ - temp = create_var(unsigned_intDI_type_node, "tmp_latent_entropy"); + temp = create_var(long_unsigned_type_node, "temp_latent_entropy"); /* 2. read... */ add_referenced_var(latent_entropy_decl); @@ -459,13 +459,13 @@ static void init_local_entropy(basic_block bb, tree local_entropy) gsi_insert_before(&gsi, call, GSI_NEW_STMT); update_stmt(call); - udi_frame_addr = fold_convert(unsigned_intDI_type_node, frame_addr); + udi_frame_addr = fold_convert(long_unsigned_type_node, frame_addr); assign = gimple_build_assign(local_entropy, udi_frame_addr); gsi_insert_after(&gsi, assign, GSI_NEW_STMT); update_stmt(assign); /* 3. create temporary copy of latent_entropy */ - tmp = create_var(unsigned_intDI_type_node, "tmp_latent_entropy"); + tmp = create_var(long_unsigned_type_node, "temp_latent_entropy"); /* 4. read the global entropy variable into local entropy */ add_referenced_var(latent_entropy_decl); @@ -480,7 +480,7 @@ static void init_local_entropy(basic_block bb, tree local_entropy) update_stmt(assign); rand_cst = get_random_const(); - rand_const = build_int_cstu(unsigned_intDI_type_node, rand_cst); + rand_const = build_int_cstu(long_unsigned_type_node, rand_cst); op = get_op(NULL); assign = create_assign(op, local_entropy, local_entropy, rand_const); gsi_insert_after(&gsi, assign, GSI_NEW_STMT); @@ -529,7 +529,7 @@ static unsigned int latent_entropy_execute(void) } /* 1. create the local entropy variable */ - local_entropy = create_var(unsigned_intDI_type_node, "local_entropy"); + local_entropy = create_var(long_unsigned_type_node, "local_entropy"); /* 2. initialize the local entropy variable */ init_local_entropy(bb, local_entropy); @@ -561,10 +561,9 @@ static void latent_entropy_start_unit(void *gcc_data __unused, if (in_lto_p) return; - /* extern volatile u64 latent_entropy */ - gcc_assert(TYPE_PRECISION(long_long_unsigned_type_node) == 64); - quals = TYPE_QUALS(long_long_unsigned_type_node) | TYPE_QUAL_VOLATILE; - type = build_qualified_type(long_long_unsigned_type_node, quals); + /* extern volatile unsigned long latent_entropy */ + quals = TYPE_QUALS(long_unsigned_type_node) | TYPE_QUAL_VOLATILE; + type = build_qualified_type(long_unsigned_type_node, quals); id = get_identifier("latent_entropy"); latent_entropy_decl = build_decl(UNKNOWN_LOCATION, VAR_DECL, id, type); From ce6dd23329b1ee6a794acf5f7e40f8e89b8317ee Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Fri, 28 Oct 2016 18:43:11 +0200 Subject: [PATCH 231/792] dctcp: avoid bogus doubling of cwnd after loss If a congestion control module doesn't provide .undo_cwnd function, tcp_undo_cwnd_reduction() will set cwnd to tp->snd_cwnd = max(tp->snd_cwnd, tp->snd_ssthresh << 1); ... which makes sense for reno (it sets ssthresh to half the current cwnd), but it makes no sense for dctcp, which sets ssthresh based on the current congestion estimate. This can cause severe growth of cwnd (eventually overflowing u32). Fix this by saving last cwnd on loss and restore cwnd based on that, similar to cubic and other algorithms. Fixes: e3118e8359bb7c ("net: tcp: add DCTCP congestion control algorithm") Cc: Lawrence Brakmo Cc: Andrew Shewmaker Cc: Glenn Judd Acked-by: Daniel Borkmann Signed-off-by: Florian Westphal Signed-off-by: David S. Miller --- net/ipv4/tcp_dctcp.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/net/ipv4/tcp_dctcp.c b/net/ipv4/tcp_dctcp.c index 10d728b6804c..ab37c6775630 100644 --- a/net/ipv4/tcp_dctcp.c +++ b/net/ipv4/tcp_dctcp.c @@ -56,6 +56,7 @@ struct dctcp { u32 next_seq; u32 ce_state; u32 delayed_ack_reserved; + u32 loss_cwnd; }; static unsigned int dctcp_shift_g __read_mostly = 4; /* g = 1/2^4 */ @@ -96,6 +97,7 @@ static void dctcp_init(struct sock *sk) ca->dctcp_alpha = min(dctcp_alpha_on_init, DCTCP_MAX_ALPHA); ca->delayed_ack_reserved = 0; + ca->loss_cwnd = 0; ca->ce_state = 0; dctcp_reset(tp, ca); @@ -111,9 +113,10 @@ static void dctcp_init(struct sock *sk) static u32 dctcp_ssthresh(struct sock *sk) { - const struct dctcp *ca = inet_csk_ca(sk); + struct dctcp *ca = inet_csk_ca(sk); struct tcp_sock *tp = tcp_sk(sk); + ca->loss_cwnd = tp->snd_cwnd; return max(tp->snd_cwnd - ((tp->snd_cwnd * ca->dctcp_alpha) >> 11U), 2U); } @@ -308,12 +311,20 @@ static size_t dctcp_get_info(struct sock *sk, u32 ext, int *attr, return 0; } +static u32 dctcp_cwnd_undo(struct sock *sk) +{ + const struct dctcp *ca = inet_csk_ca(sk); + + return max(tcp_sk(sk)->snd_cwnd, ca->loss_cwnd); +} + static struct tcp_congestion_ops dctcp __read_mostly = { .init = dctcp_init, .in_ack_event = dctcp_update_alpha, .cwnd_event = dctcp_cwnd_event, .ssthresh = dctcp_ssthresh, .cong_avoid = tcp_reno_cong_avoid, + .undo_cwnd = dctcp_cwnd_undo, .set_state = dctcp_state, .get_info = dctcp_get_info, .flags = TCP_CONG_NEEDS_ECN, From e551c32d57c88923f99f8f010e89ca7ed0735e83 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 28 Oct 2016 13:40:24 -0700 Subject: [PATCH 232/792] net: clear sk_err_soft in sk_clone_lock() At accept() time, it is possible the parent has a non zero sk_err_soft, leftover from a prior error. Make sure we do not leave this value in the child, as it makes future getsockopt(SO_ERROR) calls quite unreliable. Signed-off-by: Eric Dumazet Acked-by: Soheil Hassas Yeganeh Signed-off-by: David S. Miller --- net/core/sock.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/core/sock.c b/net/core/sock.c index c73e28fc9c2a..df171acfe232 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -1543,6 +1543,7 @@ struct sock *sk_clone_lock(const struct sock *sk, const gfp_t priority) RCU_INIT_POINTER(newsk->sk_reuseport_cb, NULL); newsk->sk_err = 0; + newsk->sk_err_soft = 0; newsk->sk_priority = 0; newsk->sk_incoming_cpu = raw_smp_processor_id(); atomic64_set(&newsk->sk_cookie, 0); From 4f2e4ad56a65f3b7d64c258e373cb71e8d2499f4 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sat, 29 Oct 2016 11:02:36 -0700 Subject: [PATCH 233/792] net: mangle zero checksum in skb_checksum_help() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sending zero checksum is ok for TCP, but not for UDP. UDPv6 receiver should by default drop a frame with a 0 checksum, and UDPv4 would not verify the checksum and might accept a corrupted packet. Simply replace such checksum by 0xffff, regardless of transport. This error was caught on SIT tunnels, but seems generic. Signed-off-by: Eric Dumazet Cc: Maciej Żenczykowski Cc: Willem de Bruijn Acked-by: Maciej Żenczykowski Signed-off-by: David S. Miller --- net/core/dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/core/dev.c b/net/core/dev.c index 820bac239738..eaad4c28069f 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2484,7 +2484,7 @@ int skb_checksum_help(struct sk_buff *skb) goto out; } - *(__sum16 *)(skb->data + offset) = csum_fold(csum); + *(__sum16 *)(skb->data + offset) = csum_fold(csum) ?: CSUM_MANGLED_0; out_set_summed: skb->ip_summed = CHECKSUM_NONE; out: From cbbf049a7c346180cc61ae0a9245c5d749d20a12 Mon Sep 17 00:00:00 2001 From: "Mintz, Yuval" Date: Sun, 30 Oct 2016 10:25:42 +0200 Subject: [PATCH 234/792] qede: Fix statistics' strings for Tx/Rx queues When an interface is configured to use Tx/Rx-only queues, the length of the statistics would be shortened to accomodate only the statistics required per-each queue, and the values would be provided accordingly. However, the strings provided would still contain both Tx and Rx strings for each one of the queues [regardless of its configuration], which might lead to out-of-bound access when filling the buffers as well as incorrect statistics presented. Fixes: 9a4d7e86acf3 ("qede: Add support for Tx/Rx-only queues.") Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- .../net/ethernet/qlogic/qede/qede_ethtool.c | 25 ++++++++++++------- 1 file changed, 16 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qede/qede_ethtool.c b/drivers/net/ethernet/qlogic/qede/qede_ethtool.c index 12251a1032d1..7567cc464b88 100644 --- a/drivers/net/ethernet/qlogic/qede/qede_ethtool.c +++ b/drivers/net/ethernet/qlogic/qede/qede_ethtool.c @@ -175,16 +175,23 @@ static void qede_get_strings_stats(struct qede_dev *edev, u8 *buf) for (i = 0, k = 0; i < QEDE_QUEUE_CNT(edev); i++) { int tc; - for (j = 0; j < QEDE_NUM_RQSTATS; j++) - sprintf(buf + (k + j) * ETH_GSTRING_LEN, - "%d: %s", i, qede_rqstats_arr[j].string); - k += QEDE_NUM_RQSTATS; - for (tc = 0; tc < edev->num_tc; tc++) { - for (j = 0; j < QEDE_NUM_TQSTATS; j++) + if (edev->fp_array[i].type & QEDE_FASTPATH_RX) { + for (j = 0; j < QEDE_NUM_RQSTATS; j++) sprintf(buf + (k + j) * ETH_GSTRING_LEN, - "%d.%d: %s", i, tc, - qede_tqstats_arr[j].string); - k += QEDE_NUM_TQSTATS; + "%d: %s", i, + qede_rqstats_arr[j].string); + k += QEDE_NUM_RQSTATS; + } + + if (edev->fp_array[i].type & QEDE_FASTPATH_TX) { + for (tc = 0; tc < edev->num_tc; tc++) { + for (j = 0; j < QEDE_NUM_TQSTATS; j++) + sprintf(buf + (k + j) * + ETH_GSTRING_LEN, + "%d.%d: %s", i, tc, + qede_tqstats_arr[j].string); + k += QEDE_NUM_TQSTATS; + } } } From 46d0847cdd4a3fc1920e56827b9189b9a105d362 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Sun, 30 Oct 2016 10:09:22 +0100 Subject: [PATCH 235/792] mlxsw: spectrum: Fix incorrect reuse of MID entries In the device, a MID entry represents a group of local ports, which can later be bound to a MDB entry. The lookup of an existing MID entry is currently done using the provided MC MAC address and VID, from the Linux bridge. However, this can result in an incorrect reuse of the same MID index in different VLAN-unaware bridges (same IP MC group and VID 0). Fix this by performing the lookup based on FID instead of VID, which is unique across different bridges. Fixes: 3a49b4fde2a1 ("mlxsw: Adding layer 2 multicast support") Signed-off-by: Ido Schimmel Acked-by: Elad Raz Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum.h | 2 +- .../ethernet/mellanox/mlxsw/spectrum_switchdev.c | 14 +++++++------- 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.h b/drivers/net/ethernet/mellanox/mlxsw/spectrum.h index 9b22863a924b..97bbc1d21df8 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.h +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.h @@ -115,7 +115,7 @@ struct mlxsw_sp_rif { struct mlxsw_sp_mid { struct list_head list; unsigned char addr[ETH_ALEN]; - u16 vid; + u16 fid; u16 mid; unsigned int ref_count; }; diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c index 5e00c79e8133..1e2c8eca3af1 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c @@ -929,12 +929,12 @@ static int mlxsw_sp_port_smid_set(struct mlxsw_sp_port *mlxsw_sp_port, u16 mid, static struct mlxsw_sp_mid *__mlxsw_sp_mc_get(struct mlxsw_sp *mlxsw_sp, const unsigned char *addr, - u16 vid) + u16 fid) { struct mlxsw_sp_mid *mid; list_for_each_entry(mid, &mlxsw_sp->br_mids.list, list) { - if (ether_addr_equal(mid->addr, addr) && mid->vid == vid) + if (ether_addr_equal(mid->addr, addr) && mid->fid == fid) return mid; } return NULL; @@ -942,7 +942,7 @@ static struct mlxsw_sp_mid *__mlxsw_sp_mc_get(struct mlxsw_sp *mlxsw_sp, static struct mlxsw_sp_mid *__mlxsw_sp_mc_alloc(struct mlxsw_sp *mlxsw_sp, const unsigned char *addr, - u16 vid) + u16 fid) { struct mlxsw_sp_mid *mid; u16 mid_idx; @@ -958,7 +958,7 @@ static struct mlxsw_sp_mid *__mlxsw_sp_mc_alloc(struct mlxsw_sp *mlxsw_sp, set_bit(mid_idx, mlxsw_sp->br_mids.mapped); ether_addr_copy(mid->addr, addr); - mid->vid = vid; + mid->fid = fid; mid->mid = mid_idx; mid->ref_count = 0; list_add_tail(&mid->list, &mlxsw_sp->br_mids.list); @@ -991,9 +991,9 @@ static int mlxsw_sp_port_mdb_add(struct mlxsw_sp_port *mlxsw_sp_port, if (switchdev_trans_ph_prepare(trans)) return 0; - mid = __mlxsw_sp_mc_get(mlxsw_sp, mdb->addr, mdb->vid); + mid = __mlxsw_sp_mc_get(mlxsw_sp, mdb->addr, fid); if (!mid) { - mid = __mlxsw_sp_mc_alloc(mlxsw_sp, mdb->addr, mdb->vid); + mid = __mlxsw_sp_mc_alloc(mlxsw_sp, mdb->addr, fid); if (!mid) { netdev_err(dev, "Unable to allocate MC group\n"); return -ENOMEM; @@ -1137,7 +1137,7 @@ static int mlxsw_sp_port_mdb_del(struct mlxsw_sp_port *mlxsw_sp_port, u16 mid_idx; int err = 0; - mid = __mlxsw_sp_mc_get(mlxsw_sp, mdb->addr, mdb->vid); + mid = __mlxsw_sp_mc_get(mlxsw_sp, mdb->addr, fid); if (!mid) { netdev_err(dev, "Unable to remove port from MC DB\n"); return -EINVAL; From 460d2830b00db407be2b72ed792eb3596f245192 Mon Sep 17 00:00:00 2001 From: Lukas Resch Date: Mon, 10 Oct 2016 08:07:32 +0000 Subject: [PATCH 236/792] can: sja1000: plx_pci: Add support for Moxa CAN devices This patch adds support for Moxa CAN devices. Signed-off-by: Lukas Resch Signed-off-by: Christoph Zehentner Signed-off-by: Marc Kleine-Budde --- drivers/net/can/sja1000/plx_pci.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/drivers/net/can/sja1000/plx_pci.c b/drivers/net/can/sja1000/plx_pci.c index 3eb7430dffbf..f8ff25c8ee2e 100644 --- a/drivers/net/can/sja1000/plx_pci.c +++ b/drivers/net/can/sja1000/plx_pci.c @@ -142,6 +142,9 @@ struct plx_pci_card { #define CTI_PCI_VENDOR_ID 0x12c4 #define CTI_PCI_DEVICE_ID_CRG001 0x0900 +#define MOXA_PCI_VENDOR_ID 0x1393 +#define MOXA_PCI_DEVICE_ID 0x0100 + static void plx_pci_reset_common(struct pci_dev *pdev); static void plx9056_pci_reset_common(struct pci_dev *pdev); static void plx_pci_reset_marathon_pci(struct pci_dev *pdev); @@ -258,6 +261,14 @@ static struct plx_pci_card_info plx_pci_card_info_elcus = { /* based on PLX9030 */ }; +static struct plx_pci_card_info plx_pci_card_info_moxa = { + "MOXA", 2, + PLX_PCI_CAN_CLOCK, PLX_PCI_OCR, PLX_PCI_CDR, + {0, 0x00, 0x00}, { {0, 0x00, 0x80}, {1, 0x00, 0x80} }, + &plx_pci_reset_common + /* based on PLX9052 */ +}; + static const struct pci_device_id plx_pci_tbl[] = { { /* Adlink PCI-7841/cPCI-7841 */ @@ -357,6 +368,13 @@ static const struct pci_device_id plx_pci_tbl[] = { 0, 0, (kernel_ulong_t)&plx_pci_card_info_elcus }, + { + /* moxa */ + MOXA_PCI_VENDOR_ID, MOXA_PCI_DEVICE_ID, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, + (kernel_ulong_t)&plx_pci_card_info_moxa + }, { 0,} }; MODULE_DEVICE_TABLE(pci, plx_pci_tbl); From deb507f91f1adbf64317ad24ac46c56eeccfb754 Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Mon, 24 Oct 2016 21:11:26 +0200 Subject: [PATCH 237/792] can: bcm: fix warning in bcm_connect/proc_register Andrey Konovalov reported an issue with proc_register in bcm.c. As suggested by Cong Wang this patch adds a lock_sock() protection and a check for unsuccessful proc_create_data() in bcm_connect(). Reference: http://marc.info/?l=linux-netdev&m=147732648731237 Reported-by: Andrey Konovalov Suggested-by: Cong Wang Signed-off-by: Oliver Hartkopp Acked-by: Cong Wang Tested-by: Andrey Konovalov Cc: linux-stable Signed-off-by: Marc Kleine-Budde --- net/can/bcm.c | 32 +++++++++++++++++++++++--------- 1 file changed, 23 insertions(+), 9 deletions(-) diff --git a/net/can/bcm.c b/net/can/bcm.c index 8e999ffdf28b..8af9d25ff988 100644 --- a/net/can/bcm.c +++ b/net/can/bcm.c @@ -1549,24 +1549,31 @@ static int bcm_connect(struct socket *sock, struct sockaddr *uaddr, int len, struct sockaddr_can *addr = (struct sockaddr_can *)uaddr; struct sock *sk = sock->sk; struct bcm_sock *bo = bcm_sk(sk); + int ret = 0; if (len < sizeof(*addr)) return -EINVAL; - if (bo->bound) - return -EISCONN; + lock_sock(sk); + + if (bo->bound) { + ret = -EISCONN; + goto fail; + } /* bind a device to this socket */ if (addr->can_ifindex) { struct net_device *dev; dev = dev_get_by_index(&init_net, addr->can_ifindex); - if (!dev) - return -ENODEV; - + if (!dev) { + ret = -ENODEV; + goto fail; + } if (dev->type != ARPHRD_CAN) { dev_put(dev); - return -ENODEV; + ret = -ENODEV; + goto fail; } bo->ifindex = dev->ifindex; @@ -1577,17 +1584,24 @@ static int bcm_connect(struct socket *sock, struct sockaddr *uaddr, int len, bo->ifindex = 0; } - bo->bound = 1; - if (proc_dir) { /* unique socket address as filename */ sprintf(bo->procname, "%lu", sock_i_ino(sk)); bo->bcm_proc_read = proc_create_data(bo->procname, 0644, proc_dir, &bcm_proc_fops, sk); + if (!bo->bcm_proc_read) { + ret = -ENOMEM; + goto fail; + } } - return 0; + bo->bound = 1; + +fail: + release_sock(sk); + + return ret; } static int bcm_recvmsg(struct socket *sock, struct msghdr *msg, size_t size, From 87557efc27f6a50140fb20df06a917f368ce3c66 Mon Sep 17 00:00:00 2001 From: Dongli Zhang Date: Mon, 31 Oct 2016 13:38:29 +0800 Subject: [PATCH 238/792] xen-netfront: do not cast grant table reference to signed short While grant reference is of type uint32_t, xen-netfront erroneously casts it to signed short in BUG_ON(). This would lead to the xen domU panic during boot-up or migration when it is attached with lots of paravirtual devices. Signed-off-by: Dongli Zhang Signed-off-by: David S. Miller --- drivers/net/xen-netfront.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index e17879dd5d5a..189a28dcd80d 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -304,7 +304,7 @@ static void xennet_alloc_rx_buffers(struct netfront_queue *queue) queue->rx_skbs[id] = skb; ref = gnttab_claim_grant_reference(&queue->gref_rx_head); - BUG_ON((signed short)ref < 0); + WARN_ON_ONCE(IS_ERR_VALUE((unsigned long)ref)); queue->grant_rx_ref[id] = ref; page = skb_frag_page(&skb_shinfo(skb)->frags[0]); @@ -428,7 +428,7 @@ static void xennet_tx_setup_grant(unsigned long gfn, unsigned int offset, id = get_id_from_freelist(&queue->tx_skb_freelist, queue->tx_skbs); tx = RING_GET_REQUEST(&queue->tx, queue->tx.req_prod_pvt++); ref = gnttab_claim_grant_reference(&queue->gref_tx_head); - BUG_ON((signed short)ref < 0); + WARN_ON_ONCE(IS_ERR_VALUE((unsigned long)ref)); gnttab_grant_foreign_access_ref(ref, queue->info->xbdev->otherend_id, gfn, GNTMAP_readonly); From cd26da4ff4eb7189921d4e7ad87e8adebb7b416b Mon Sep 17 00:00:00 2001 From: Xin Long Date: Mon, 31 Oct 2016 20:32:31 +0800 Subject: [PATCH 239/792] sctp: hold transport instead of assoc in sctp_diag In sctp_transport_lookup_process(), Commit 1cceda784980 ("sctp: fix the issue sctp_diag uses lock_sock in rcu_read_lock") moved cb() out of rcu lock, but it put transport and hold assoc instead, and ignore that cb() still uses transport. It may cause a use-after-free issue. This patch is to hold transport instead of assoc there. Fixes: 1cceda784980 ("sctp: fix the issue sctp_diag uses lock_sock in rcu_read_lock") Signed-off-by: Xin Long Acked-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller --- net/sctp/socket.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/net/sctp/socket.c b/net/sctp/socket.c index 9fbb6feb8c27..71b75f9d9c1b 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -4480,12 +4480,9 @@ int sctp_transport_lookup_process(int (*cb)(struct sctp_transport *, void *), if (!transport || !sctp_transport_hold(transport)) goto out; - sctp_association_hold(transport->asoc); - sctp_transport_put(transport); - rcu_read_unlock(); err = cb(transport, p); - sctp_association_put(transport->asoc); + sctp_transport_put(transport); out: return err; From 7c17fcc726903ffed1716351efdc617e752533ed Mon Sep 17 00:00:00 2001 From: Xin Long Date: Mon, 31 Oct 2016 20:32:32 +0800 Subject: [PATCH 240/792] sctp: return back transport in __sctp_rcv_init_lookup Prior to this patch, it used a local variable to save the transport that is looked up by __sctp_lookup_association(), and didn't return it back. But in sctp_rcv, it is used to initialize chunk->transport. So when hitting this, even if it found the transport, it was still initializing chunk->transport with null instead. This patch is to return the transport back through transport pointer that is from __sctp_rcv_lookup_harder(). Signed-off-by: Xin Long Acked-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller --- net/sctp/input.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/net/sctp/input.c b/net/sctp/input.c index a2ea1d1cc06a..8e0bc58eec20 100644 --- a/net/sctp/input.c +++ b/net/sctp/input.c @@ -1021,7 +1021,6 @@ static struct sctp_association *__sctp_rcv_init_lookup(struct net *net, struct sctphdr *sh = sctp_hdr(skb); union sctp_params params; sctp_init_chunk_t *init; - struct sctp_transport *transport; struct sctp_af *af; /* @@ -1052,7 +1051,7 @@ static struct sctp_association *__sctp_rcv_init_lookup(struct net *net, af->from_addr_param(paddr, params.addr, sh->source, 0); - asoc = __sctp_lookup_association(net, laddr, paddr, &transport); + asoc = __sctp_lookup_association(net, laddr, paddr, transportp); if (asoc) return asoc; } From dae399d7fdee84d8f5227a9711d95bb4e9a05d4e Mon Sep 17 00:00:00 2001 From: Xin Long Date: Mon, 31 Oct 2016 20:32:33 +0800 Subject: [PATCH 241/792] sctp: hold transport instead of assoc when lookup assoc in rx path Prior to this patch, in rx path, before calling lock_sock, it needed to hold assoc when got it by __sctp_lookup_association, in case other place would free/put assoc. But in __sctp_lookup_association, it lookup and hold transport, then got assoc by transport->assoc, then hold assoc and put transport. It means it didn't hold transport, yet it was returned and later on directly assigned to chunk->transport. Without the protection of sock lock, the transport may be freed/put by other places, which would cause a use-after-free issue. This patch is to fix this issue by holding transport instead of assoc. As holding transport can make sure to access assoc is also safe, and actually it looks up assoc by searching transport rhashtable, to hold transport here makes more sense. Note that the function will be renamed later on on another patch. Signed-off-by: Xin Long Acked-by: Marcelo Ricardo Leitner Signed-off-by: David S. Miller --- include/net/sctp/sctp.h | 2 +- net/sctp/input.c | 32 ++++++++++++++++---------------- net/sctp/ipv6.c | 2 +- 3 files changed, 18 insertions(+), 18 deletions(-) diff --git a/include/net/sctp/sctp.h b/include/net/sctp/sctp.h index 87a7f42e7639..31acc3f4f132 100644 --- a/include/net/sctp/sctp.h +++ b/include/net/sctp/sctp.h @@ -152,7 +152,7 @@ void sctp_unhash_endpoint(struct sctp_endpoint *); struct sock *sctp_err_lookup(struct net *net, int family, struct sk_buff *, struct sctphdr *, struct sctp_association **, struct sctp_transport **); -void sctp_err_finish(struct sock *, struct sctp_association *); +void sctp_err_finish(struct sock *, struct sctp_transport *); void sctp_icmp_frag_needed(struct sock *, struct sctp_association *, struct sctp_transport *t, __u32 pmtu); void sctp_icmp_redirect(struct sock *, struct sctp_transport *, diff --git a/net/sctp/input.c b/net/sctp/input.c index 8e0bc58eec20..a01a56ec8b8c 100644 --- a/net/sctp/input.c +++ b/net/sctp/input.c @@ -181,9 +181,10 @@ int sctp_rcv(struct sk_buff *skb) * bound to another interface, via SO_BINDTODEVICE, treat it as OOTB */ if (sk->sk_bound_dev_if && (sk->sk_bound_dev_if != af->skb_iif(skb))) { - if (asoc) { - sctp_association_put(asoc); + if (transport) { + sctp_transport_put(transport); asoc = NULL; + transport = NULL; } else { sctp_endpoint_put(ep); ep = NULL; @@ -269,8 +270,8 @@ int sctp_rcv(struct sk_buff *skb) bh_unlock_sock(sk); /* Release the asoc/ep ref we took in the lookup calls. */ - if (asoc) - sctp_association_put(asoc); + if (transport) + sctp_transport_put(transport); else sctp_endpoint_put(ep); @@ -283,8 +284,8 @@ discard_it: discard_release: /* Release the asoc/ep ref we took in the lookup calls. */ - if (asoc) - sctp_association_put(asoc); + if (transport) + sctp_transport_put(transport); else sctp_endpoint_put(ep); @@ -300,6 +301,7 @@ int sctp_backlog_rcv(struct sock *sk, struct sk_buff *skb) { struct sctp_chunk *chunk = SCTP_INPUT_CB(skb)->chunk; struct sctp_inq *inqueue = &chunk->rcvr->inqueue; + struct sctp_transport *t = chunk->transport; struct sctp_ep_common *rcvr = NULL; int backloged = 0; @@ -351,7 +353,7 @@ int sctp_backlog_rcv(struct sock *sk, struct sk_buff *skb) done: /* Release the refs we took in sctp_add_backlog */ if (SCTP_EP_TYPE_ASSOCIATION == rcvr->type) - sctp_association_put(sctp_assoc(rcvr)); + sctp_transport_put(t); else if (SCTP_EP_TYPE_SOCKET == rcvr->type) sctp_endpoint_put(sctp_ep(rcvr)); else @@ -363,6 +365,7 @@ done: static int sctp_add_backlog(struct sock *sk, struct sk_buff *skb) { struct sctp_chunk *chunk = SCTP_INPUT_CB(skb)->chunk; + struct sctp_transport *t = chunk->transport; struct sctp_ep_common *rcvr = chunk->rcvr; int ret; @@ -373,7 +376,7 @@ static int sctp_add_backlog(struct sock *sk, struct sk_buff *skb) * from us */ if (SCTP_EP_TYPE_ASSOCIATION == rcvr->type) - sctp_association_hold(sctp_assoc(rcvr)); + sctp_transport_hold(t); else if (SCTP_EP_TYPE_SOCKET == rcvr->type) sctp_endpoint_hold(sctp_ep(rcvr)); else @@ -537,15 +540,15 @@ struct sock *sctp_err_lookup(struct net *net, int family, struct sk_buff *skb, return sk; out: - sctp_association_put(asoc); + sctp_transport_put(transport); return NULL; } /* Common cleanup code for icmp/icmpv6 error handler. */ -void sctp_err_finish(struct sock *sk, struct sctp_association *asoc) +void sctp_err_finish(struct sock *sk, struct sctp_transport *t) { bh_unlock_sock(sk); - sctp_association_put(asoc); + sctp_transport_put(t); } /* @@ -641,7 +644,7 @@ void sctp_v4_err(struct sk_buff *skb, __u32 info) } out_unlock: - sctp_err_finish(sk, asoc); + sctp_err_finish(sk, transport); } /* @@ -952,11 +955,8 @@ static struct sctp_association *__sctp_lookup_association( goto out; asoc = t->asoc; - sctp_association_hold(asoc); *pt = t; - sctp_transport_put(t); - out: return asoc; } @@ -986,7 +986,7 @@ int sctp_has_association(struct net *net, struct sctp_transport *transport; if ((asoc = sctp_lookup_association(net, laddr, paddr, &transport))) { - sctp_association_put(asoc); + sctp_transport_put(transport); return 1; } diff --git a/net/sctp/ipv6.c b/net/sctp/ipv6.c index f473779e8b1c..176af3080a2b 100644 --- a/net/sctp/ipv6.c +++ b/net/sctp/ipv6.c @@ -198,7 +198,7 @@ static void sctp_v6_err(struct sk_buff *skb, struct inet6_skb_parm *opt, } out_unlock: - sctp_err_finish(sk, asoc); + sctp_err_finish(sk, transport); out: if (likely(idev != NULL)) in6_dev_put(idev); From 953b956a2e6d35298e684f251bad98ea6c96f982 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 24 Oct 2016 13:59:15 +0200 Subject: [PATCH 242/792] gpio: GPIO_GET_LINE{HANDLE,EVENT}_IOCTL: Fix file descriptor leak When allocating a new line handle or event a file is allocated that it is associated to. The file is attached to a file descriptor of the current process and the file descriptor is returned to userspace using copy_to_user(). If this copy operation fails the line handle or event allocation is aborted, all acquired resources are freed and an error is returned. But the file struct is not freed and left attached to the userspace application and even though the file descriptor number was not copied it is trivial to guess. If a userspace application performs a IOCTL on such a left over file descriptor it will trigger a use-after-free and if the file descriptor is closed (latest when the application exits) a double-free is triggered. anon_inode_getfd() performs 3 tasks, allocate a file struct, allocate a file descriptor for the current process and install the file struct in the file descriptor. As soon as the file struct is installed in the file descriptor it is accessible by userspace (even if the IOCTL itself hasn't completed yet), this means uninstalling the fd on the error path is not an option, since userspace might already got a reference to the file. Instead anon_inode_getfd() needs to be broken into its individual steps. The allocation of the file struct and file descriptor is done first, then the copy_to_user() is executed and only if it succeeds the file is installed. Since the file struct is reference counted it can not be just freed, but its reference needs to be dropped, which will also call the release() callback, which will free the state attached to the file. So in this case the normal error cleanup path should not be taken. Cc: stable@vger.kernel.org Fixes: d932cd49182f ("gpio: free handles in fringe cases") Signed-off-by: Lars-Peter Clausen Signed-off-by: Linus Walleij --- drivers/gpio/gpiolib.c | 57 +++++++++++++++++++++++++++++++++--------- 1 file changed, 45 insertions(+), 12 deletions(-) diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 20e09b7c2de3..93ed0e00c578 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include #include @@ -423,6 +424,7 @@ static int linehandle_create(struct gpio_device *gdev, void __user *ip) { struct gpiohandle_request handlereq; struct linehandle_state *lh; + struct file *file; int fd, i, ret; if (copy_from_user(&handlereq, ip, sizeof(handlereq))) @@ -499,26 +501,41 @@ static int linehandle_create(struct gpio_device *gdev, void __user *ip) i--; lh->numdescs = handlereq.lines; - fd = anon_inode_getfd("gpio-linehandle", - &linehandle_fileops, - lh, - O_RDONLY | O_CLOEXEC); + fd = get_unused_fd_flags(O_RDONLY | O_CLOEXEC); if (fd < 0) { ret = fd; goto out_free_descs; } + file = anon_inode_getfile("gpio-linehandle", + &linehandle_fileops, + lh, + O_RDONLY | O_CLOEXEC); + if (IS_ERR(file)) { + ret = PTR_ERR(file); + goto out_put_unused_fd; + } + handlereq.fd = fd; if (copy_to_user(ip, &handlereq, sizeof(handlereq))) { - ret = -EFAULT; - goto out_free_descs; + /* + * fput() will trigger the release() callback, so do not go onto + * the regular error cleanup path here. + */ + fput(file); + put_unused_fd(fd); + return -EFAULT; } + fd_install(fd, file); + dev_dbg(&gdev->dev, "registered chardev handle for %d lines\n", lh->numdescs); return 0; +out_put_unused_fd: + put_unused_fd(fd); out_free_descs: for (; i >= 0; i--) gpiod_free(lh->descs[i]); @@ -721,6 +738,7 @@ static int lineevent_create(struct gpio_device *gdev, void __user *ip) struct gpioevent_request eventreq; struct lineevent_state *le; struct gpio_desc *desc; + struct file *file; u32 offset; u32 lflags; u32 eflags; @@ -815,23 +833,38 @@ static int lineevent_create(struct gpio_device *gdev, void __user *ip) if (ret) goto out_free_desc; - fd = anon_inode_getfd("gpio-event", - &lineevent_fileops, - le, - O_RDONLY | O_CLOEXEC); + fd = get_unused_fd_flags(O_RDONLY | O_CLOEXEC); if (fd < 0) { ret = fd; goto out_free_irq; } + file = anon_inode_getfile("gpio-event", + &lineevent_fileops, + le, + O_RDONLY | O_CLOEXEC); + if (IS_ERR(file)) { + ret = PTR_ERR(file); + goto out_put_unused_fd; + } + eventreq.fd = fd; if (copy_to_user(ip, &eventreq, sizeof(eventreq))) { - ret = -EFAULT; - goto out_free_irq; + /* + * fput() will trigger the release() callback, so do not go onto + * the regular error cleanup path here. + */ + fput(file); + put_unused_fd(fd); + return -EFAULT; } + fd_install(fd, file); + return 0; +out_put_unused_fd: + put_unused_fd(fd); out_free_irq: free_irq(le->irq, le); out_free_desc: From c7e9d39831a31682285cc31ddf7dd06c0fe59138 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 25 Oct 2016 10:47:44 +0900 Subject: [PATCH 243/792] gpio: of: fix GPIO drivers with multiple gpio_chip for a single node Sylvain Lemieux reports the LPC32xx GPIO driver is broken since commit 762c2e46c059 ("gpio: of: remove of_gpiochip_and_xlate() and struct gg_data"). Probably, gpio-etraxfs.c and gpio-davinci.c are broken too. Those drivers register multiple gpio_chip that are associated to a single OF node, and their own .of_xlate() checks if the passed gpio_chip is valid. Now, the problem is of_find_gpiochip_by_node() returns the first gpio_chip found to match the given node. So, .of_xlate() fails, except for the first GPIO bank. Reverting the commit could be a solution, but I do not want to go back to the mess of struct gg_data. Another solution here is to take the match by a node pointer and the success of .of_xlate(). It is a bit clumsy to call .of_xlate twice; for gpio_chip matching and for really getting the gpio_desc index. Perhaps, our long-term goal might be to convert the drivers to single chip registration, but this commit will solve the problem until then. Fixes: 762c2e46c059 ("gpio: of: remove of_gpiochip_and_xlate() and struct gg_data") Signed-off-by: Masahiro Yamada Reported-by: Sylvain Lemieux Tested-by: David Lechner Signed-off-by: Linus Walleij --- drivers/gpio/gpiolib-of.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c index ecad3f0e3b77..193f15d50bba 100644 --- a/drivers/gpio/gpiolib-of.c +++ b/drivers/gpio/gpiolib-of.c @@ -26,14 +26,18 @@ #include "gpiolib.h" -static int of_gpiochip_match_node(struct gpio_chip *chip, void *data) +static int of_gpiochip_match_node_and_xlate(struct gpio_chip *chip, void *data) { - return chip->gpiodev->dev.of_node == data; + struct of_phandle_args *gpiospec = data; + + return chip->gpiodev->dev.of_node == gpiospec->np && + chip->of_xlate(chip, gpiospec, NULL) >= 0; } -static struct gpio_chip *of_find_gpiochip_by_node(struct device_node *np) +static struct gpio_chip *of_find_gpiochip_by_xlate( + struct of_phandle_args *gpiospec) { - return gpiochip_find(np, of_gpiochip_match_node); + return gpiochip_find(gpiospec, of_gpiochip_match_node_and_xlate); } static struct gpio_desc *of_xlate_and_get_gpiod_flags(struct gpio_chip *chip, @@ -79,7 +83,7 @@ struct gpio_desc *of_get_named_gpiod_flags(struct device_node *np, return ERR_PTR(ret); } - chip = of_find_gpiochip_by_node(gpiospec.np); + chip = of_find_gpiochip_by_xlate(&gpiospec); if (!chip) { desc = ERR_PTR(-EPROBE_DEFER); goto out; From 091c531b09c151c2d712a8f347009ca3698a2467 Mon Sep 17 00:00:00 2001 From: Ray Jui Date: Mon, 17 Oct 2016 18:41:41 -0700 Subject: [PATCH 244/792] pinctrl: iproc: Fix iProc and NSP GPIO support Since commit 44a7185c2ae6 ("of/platform: Add common method to populate default bus"), ARM64 platform devices are populated at the arch_initcall_sync level; as a result, the platform_driver_probe calls in both the iProc and NSP GPIO drivers fail with -ENODEV since by that time the platform device was not yet registered. Replace platform_driver_probe with platform_driver_register, that allow the device to be register later Fixes: 44a7185c2ae6 ("of/platform: Add common method to populate default bus") Signed-off-by: Ray Jui Tested-by: Eric Anholt Signed-off-by: Linus Walleij --- drivers/pinctrl/bcm/pinctrl-iproc-gpio.c | 2 +- drivers/pinctrl/bcm/pinctrl-nsp-gpio.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c b/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c index 7f7700716398..5d1e505c3c63 100644 --- a/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c +++ b/drivers/pinctrl/bcm/pinctrl-iproc-gpio.c @@ -844,6 +844,6 @@ static struct platform_driver iproc_gpio_driver = { static int __init iproc_gpio_init(void) { - return platform_driver_probe(&iproc_gpio_driver, iproc_gpio_probe); + return platform_driver_register(&iproc_gpio_driver); } arch_initcall_sync(iproc_gpio_init); diff --git a/drivers/pinctrl/bcm/pinctrl-nsp-gpio.c b/drivers/pinctrl/bcm/pinctrl-nsp-gpio.c index 35783db1c10b..c8deb8be1da7 100644 --- a/drivers/pinctrl/bcm/pinctrl-nsp-gpio.c +++ b/drivers/pinctrl/bcm/pinctrl-nsp-gpio.c @@ -741,6 +741,6 @@ static struct platform_driver nsp_gpio_driver = { static int __init nsp_gpio_init(void) { - return platform_driver_probe(&nsp_gpio_driver, nsp_gpio_probe); + return platform_driver_register(&nsp_gpio_driver); } arch_initcall_sync(nsp_gpio_init); From c35e7790dcbe74b0c85f4c26bbe7e15510422684 Mon Sep 17 00:00:00 2001 From: Patrice Chotard Date: Tue, 18 Oct 2016 09:16:28 +0200 Subject: [PATCH 245/792] pinctrl: st: don't specify default interrupt trigger Thanks to 332e99d5ae4 which now alerts of default trigger usage when configuring interrupts. Signed-off-by: Patrice Chotard Acked-by: Peter Griffin Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-st.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/pinctrl-st.c b/drivers/pinctrl/pinctrl-st.c index 99da4cf91031..b7bb37167969 100644 --- a/drivers/pinctrl/pinctrl-st.c +++ b/drivers/pinctrl/pinctrl-st.c @@ -1512,7 +1512,7 @@ static int st_gpiolib_register_bank(struct st_pinctrl *info, if (info->irqmux_base || gpio_irq > 0) { err = gpiochip_irqchip_add(&bank->gpio_chip, &st_gpio_irqchip, 0, handle_simple_irq, - IRQ_TYPE_LEVEL_LOW); + IRQ_TYPE_NONE); if (err) { gpiochip_remove(&bank->gpio_chip); dev_info(dev, "could not add irqchip\n"); From 1064a2b41579d77af16164f5dd7bc6948ba1d5be Mon Sep 17 00:00:00 2001 From: Alexandre TORGUE Date: Thu, 20 Oct 2016 15:26:51 +0200 Subject: [PATCH 246/792] pinctrl: stm32: remove dependency with interrupt controller This patch allows to probe stm32 pinctrl driver even if no interrupt controller is defined to manage gpio irqs. Signed-off-by: Alexandre TORGUE Signed-off-by: Linus Walleij --- drivers/pinctrl/stm32/pinctrl-stm32.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/pinctrl/stm32/pinctrl-stm32.c b/drivers/pinctrl/stm32/pinctrl-stm32.c index 200667f08c37..efc43711ff5c 100644 --- a/drivers/pinctrl/stm32/pinctrl-stm32.c +++ b/drivers/pinctrl/stm32/pinctrl-stm32.c @@ -1092,9 +1092,11 @@ int stm32_pctl_probe(struct platform_device *pdev) return -EINVAL; } - ret = stm32_pctrl_dt_setup_irq(pdev, pctl); - if (ret) - return ret; + if (of_find_property(np, "interrupt-parent", NULL)) { + ret = stm32_pctrl_dt_setup_irq(pdev, pctl); + if (ret) + return ret; + } for_each_child_of_node(np, child) if (of_property_read_bool(child, "gpio-controller")) From 0553d8d0b03ad58f9917460c40a2e2b680f5bfdb Mon Sep 17 00:00:00 2001 From: Alexandre TORGUE Date: Thu, 20 Oct 2016 15:26:52 +0200 Subject: [PATCH 247/792] pinctrl: stm32: move gpio irqs binding to optional stm32 pinctrl driver could be probed even if no interrupt controller is defined to manage gpio irqs. Entries related to gpio irq management are moved to optional. Signed-off-by: Alexandre TORGUE Signed-off-by: Linus Walleij --- .../devicetree/bindings/pinctrl/st,stm32-pinctrl.txt | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt index f9753c416974..b24583aa34c3 100644 --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt @@ -14,11 +14,6 @@ Required properies: - #size-cells : The value of this property must be 1 - ranges : defines mapping between pin controller node (parent) to gpio-bank node (children). - - interrupt-parent: phandle of the interrupt parent to which the external - GPIO interrupts are forwarded to. - - st,syscfg: Should be phandle/offset pair. The phandle to the syscon node - which includes IRQ mux selection register, and the offset of the IRQ mux - selection register. - pins-are-numbered: Specify the subnodes are using numbered pinmux to specify pins. @@ -37,6 +32,11 @@ Required properties: Optional properties: - reset: : Reference to the reset controller + - interrupt-parent: phandle of the interrupt parent to which the external + GPIO interrupts are forwarded to. + - st,syscfg: Should be phandle/offset pair. The phandle to the syscon node + which includes IRQ mux selection register, and the offset of the IRQ mux + selection register. Example: #include From 9999fe5df58773489b9564467b5c8cfb364e0b80 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Tue, 18 Oct 2016 14:09:15 -0700 Subject: [PATCH 248/792] pinctrl: imx: reset group index on probe Group index is incremented on every new group parsed. Since the field is part of struct imx_pinctrl_soc_info, which is typically a global variable passed by the individual pinctrl-imx.c based driver, it does not get cleared automatically when re-probing the driver. This lead imx_pinctrl_parse_functions passing a group pointer which is outside of the allocated group space on second probe and onwards. Typically this ended up in a NULL pointer dereference when accessing the name field like this: Unable to handle kernel NULL pointer dereference at virtual address 00000000 ... PC is at strcmp+0x18/0x44 LR is at imx_dt_node_to_map+0xc4/0x290 Avoid this by setting group_index to 0 on probe. This has been observed when using DEBUG_TEST_DRIVER_REMOVE. Signed-off-by: Stefan Agner Signed-off-by: Linus Walleij --- drivers/pinctrl/freescale/pinctrl-imx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/pinctrl/freescale/pinctrl-imx.c b/drivers/pinctrl/freescale/pinctrl-imx.c index 47613201269a..79c4e14a5a75 100644 --- a/drivers/pinctrl/freescale/pinctrl-imx.c +++ b/drivers/pinctrl/freescale/pinctrl-imx.c @@ -687,6 +687,7 @@ static int imx_pinctrl_probe_dt(struct platform_device *pdev, if (!info->functions) return -ENOMEM; + info->group_index = 0; if (flat_funcs) { info->ngroups = of_get_child_count(np); } else { From 6227e9f0e9ee988e2cfb425b02ef17f233b1d8d7 Mon Sep 17 00:00:00 2001 From: Alexey Brodkin Date: Mon, 31 Oct 2016 15:59:11 +0300 Subject: [PATCH 249/792] ARC: Enable PERF_EVENTS in nSIM driven platforms Now when we have properly working performance counters in nSIM even with interrupt support (fix should be a part of upcoming nSIM engineering build 2016.12-005) we may enable perf support by default for all platforms that use nSIM for ARC cores simulation. Note 1: PCT node was missing for some reason in nsimosci.dts while all other nSIM-related .dts files already had PCT node for quite some time, so adding it now. Note 2: All defconfigs were regenerated with "make savedefconfig" which led to some clean-ups in nsimosci_hs_smp_defconfig: CONFIG_FRAMEBUFFER_CONSOLE=y was removed because it is automatically selected now by DRM. Signed-off-by: Alexey Brodkin Signed-off-by: Vineet Gupta --- arch/arc/boot/dts/axc001.dtsi | 2 +- arch/arc/boot/dts/nsim_700.dts | 2 +- arch/arc/boot/dts/nsimosci.dts | 4 ++++ arch/arc/configs/nsim_700_defconfig | 1 + arch/arc/configs/nsim_hs_defconfig | 1 + arch/arc/configs/nsim_hs_smp_defconfig | 1 + arch/arc/configs/nsimosci_defconfig | 1 + arch/arc/configs/nsimosci_hs_defconfig | 1 + arch/arc/configs/nsimosci_hs_smp_defconfig | 3 +-- 9 files changed, 12 insertions(+), 4 deletions(-) diff --git a/arch/arc/boot/dts/axc001.dtsi b/arch/arc/boot/dts/axc001.dtsi index 6ae2c476ad82..53ce226f77a5 100644 --- a/arch/arc/boot/dts/axc001.dtsi +++ b/arch/arc/boot/dts/axc001.dtsi @@ -71,7 +71,7 @@ reg-io-width = <4>; }; - arcpmu0: pmu { + arcpct0: pct { compatible = "snps,arc700-pct"; }; }; diff --git a/arch/arc/boot/dts/nsim_700.dts b/arch/arc/boot/dts/nsim_700.dts index ce0ccd20b5bf..5ee96b067c08 100644 --- a/arch/arc/boot/dts/nsim_700.dts +++ b/arch/arc/boot/dts/nsim_700.dts @@ -69,7 +69,7 @@ }; }; - arcpmu0: pmu { + arcpct0: pct { compatible = "snps,arc700-pct"; }; }; diff --git a/arch/arc/boot/dts/nsimosci.dts b/arch/arc/boot/dts/nsimosci.dts index bcf603142a33..3c391ba565ed 100644 --- a/arch/arc/boot/dts/nsimosci.dts +++ b/arch/arc/boot/dts/nsimosci.dts @@ -83,5 +83,9 @@ reg = <0xf0003000 0x44>; interrupts = <7>; }; + + arcpct0: pct { + compatible = "snps,arc700-pct"; + }; }; }; diff --git a/arch/arc/configs/nsim_700_defconfig b/arch/arc/configs/nsim_700_defconfig index 7314f538847b..b0066a749d4c 100644 --- a/arch/arc/configs/nsim_700_defconfig +++ b/arch/arc/configs/nsim_700_defconfig @@ -14,6 +14,7 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="../arc_initramfs/" CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y +CONFIG_PERF_EVENTS=y # CONFIG_SLUB_DEBUG is not set # CONFIG_COMPAT_BRK is not set CONFIG_KPROBES=y diff --git a/arch/arc/configs/nsim_hs_defconfig b/arch/arc/configs/nsim_hs_defconfig index 65ab9fbf83f2..ebe9ebb92933 100644 --- a/arch/arc/configs/nsim_hs_defconfig +++ b/arch/arc/configs/nsim_hs_defconfig @@ -14,6 +14,7 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="../../arc_initramfs_hs/" CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y +CONFIG_PERF_EVENTS=y # CONFIG_SLUB_DEBUG is not set # CONFIG_COMPAT_BRK is not set CONFIG_KPROBES=y diff --git a/arch/arc/configs/nsim_hs_smp_defconfig b/arch/arc/configs/nsim_hs_smp_defconfig index 3b3990cddbe1..4bde43278be6 100644 --- a/arch/arc/configs/nsim_hs_smp_defconfig +++ b/arch/arc/configs/nsim_hs_smp_defconfig @@ -12,6 +12,7 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="../arc_initramfs_hs/" CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y +CONFIG_PERF_EVENTS=y # CONFIG_SLUB_DEBUG is not set # CONFIG_COMPAT_BRK is not set CONFIG_KPROBES=y diff --git a/arch/arc/configs/nsimosci_defconfig b/arch/arc/configs/nsimosci_defconfig index 98cf20933bbb..f6fb3d26557e 100644 --- a/arch/arc/configs/nsimosci_defconfig +++ b/arch/arc/configs/nsimosci_defconfig @@ -14,6 +14,7 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="../arc_initramfs/" CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y +CONFIG_PERF_EVENTS=y # CONFIG_SLUB_DEBUG is not set # CONFIG_COMPAT_BRK is not set CONFIG_KPROBES=y diff --git a/arch/arc/configs/nsimosci_hs_defconfig b/arch/arc/configs/nsimosci_hs_defconfig index ddf8b96d494e..b9f0fe00044b 100644 --- a/arch/arc/configs/nsimosci_hs_defconfig +++ b/arch/arc/configs/nsimosci_hs_defconfig @@ -14,6 +14,7 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="../arc_initramfs_hs/" CONFIG_KALLSYMS_ALL=y CONFIG_EMBEDDED=y +CONFIG_PERF_EVENTS=y # CONFIG_SLUB_DEBUG is not set # CONFIG_COMPAT_BRK is not set CONFIG_KPROBES=y diff --git a/arch/arc/configs/nsimosci_hs_smp_defconfig b/arch/arc/configs/nsimosci_hs_smp_defconfig index ceb90745326e..6da71ba253a9 100644 --- a/arch/arc/configs/nsimosci_hs_smp_defconfig +++ b/arch/arc/configs/nsimosci_hs_smp_defconfig @@ -10,6 +10,7 @@ CONFIG_IKCONFIG_PROC=y # CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="../arc_initramfs_hs/" +CONFIG_PERF_EVENTS=y # CONFIG_COMPAT_BRK is not set CONFIG_KPROBES=y CONFIG_MODULES=y @@ -34,7 +35,6 @@ CONFIG_INET=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set # CONFIG_WIRELESS is not set CONFIG_DEVTMPFS=y @@ -72,7 +72,6 @@ CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_HWMON is not set CONFIG_DRM=y CONFIG_DRM_ARCPGU=y -CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y # CONFIG_HID is not set # CONFIG_USB_SUPPORT is not set From 8f6d9eb2a3f38f1acd04efa0aeb8b81f5373c923 Mon Sep 17 00:00:00 2001 From: Noam Camus Date: Sun, 30 Oct 2016 09:48:42 +0200 Subject: [PATCH 250/792] ARC: [SMP] avoid overriding present cpumask At smp_prepare_cpus() we set present cpu mask as part of init for all CPUs at range [0-max_cpus]. This is done without checking if this mask is already being set. At platform of eznps this mask is already being initialized at smp_init_cpus() by using hook plat_smp_ops.init_early_smp(). So to avoid overriding of present cpu mask we check the number of bits which are set in this mask. At the begin only bit for boot CPU is set so if number of bits already set is no more than one we can be assure that there is no overriding of this mask. Signed-off-by: Noam Camus Signed-off-by: Vineet Gupta --- arch/arc/kernel/smp.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/arch/arc/kernel/smp.c b/arch/arc/kernel/smp.c index f183cc648851..f00029e9cbe4 100644 --- a/arch/arc/kernel/smp.c +++ b/arch/arc/kernel/smp.c @@ -67,11 +67,13 @@ void __init smp_prepare_cpus(unsigned int max_cpus) int i; /* - * Initialise the present map, which describes the set of CPUs - * actually populated at the present time. + * if platform didn't set the present map already, do it now + * boot cpu is set to present already by init/main.c */ - for (i = 0; i < max_cpus; i++) - set_cpu_present(i, true); + if (num_present_cpus() <= 1) { + for (i = 0; i < max_cpus; i++) + set_cpu_present(i, true); + } } void __init smp_cpus_done(unsigned int max_cpus) From fcdefccac976ee51dd6071832b842d8fb41c479c Mon Sep 17 00:00:00 2001 From: Andy Gospodarek Date: Mon, 31 Oct 2016 13:32:03 -0400 Subject: [PATCH 251/792] bgmac: stop clearing DMA receive control register right after it is set Current bgmac code initializes some DMA settings in the receive control register for some hardware and then immediately clears those settings. Not clearing those settings results in ~420Mbps *improvement* in throughput; this system can now receive frames at line-rate on Broadcom 5871x hardware compared to ~520Mbps today. I also tested a few other values but found there to be no discernible difference in CPU utilization even if burst size and prefetching values are different. On the hardware tested there was no need to keep the code that cleared all but bits 16-17, but since there is a wide variety of hardware that used this driver (I did not look at all hardware docs for hardware using this IP block), I find it wise to move this call up and clear bits just after reading the default value from the hardware rather than completely removing it. This is a good candidate for -stable >=3.14 since that is when the code that was supposed to improve performance (but did not) was introduced. Signed-off-by: Andy Gospodarek Fixes: 56ceecde1f29 ("bgmac: initialize the DMA controller of core...") Cc: Hauke Mehrtens Acked-by: Hauke Mehrtens Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bgmac.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c index 31ca204b38d2..91cbf92de971 100644 --- a/drivers/net/ethernet/broadcom/bgmac.c +++ b/drivers/net/ethernet/broadcom/bgmac.c @@ -307,6 +307,10 @@ static void bgmac_dma_rx_enable(struct bgmac *bgmac, u32 ctl; ctl = bgmac_read(bgmac, ring->mmio_base + BGMAC_DMA_RX_CTL); + + /* preserve ONLY bits 16-17 from current hardware value */ + ctl &= BGMAC_DMA_RX_ADDREXT_MASK; + if (bgmac->feature_flags & BGMAC_FEAT_RX_MASK_SETUP) { ctl &= ~BGMAC_DMA_RX_BL_MASK; ctl |= BGMAC_DMA_RX_BL_128 << BGMAC_DMA_RX_BL_SHIFT; @@ -317,7 +321,6 @@ static void bgmac_dma_rx_enable(struct bgmac *bgmac, ctl &= ~BGMAC_DMA_RX_PT_MASK; ctl |= BGMAC_DMA_RX_PT_1 << BGMAC_DMA_RX_PT_SHIFT; } - ctl &= BGMAC_DMA_RX_ADDREXT_MASK; ctl |= BGMAC_DMA_RX_ENABLE; ctl |= BGMAC_DMA_RX_PARITY_DISABLE; ctl |= BGMAC_DMA_RX_OVERFLOW_CONT; From b0a6af8b34c9ad20894aa46f85f4bf59d444f286 Mon Sep 17 00:00:00 2001 From: Peter Wu Date: Mon, 31 Oct 2016 23:48:22 +0100 Subject: [PATCH 252/792] drm/nouveau/acpi: fix check for power resources support Check whether the kernel really supports power resources for a device, otherwise the power might not be removed when the device is runtime suspended (DSM should still work in these cases where PR does not). This is a workaround for a problem where ACPICA and Windows 10 differ in behavior. ACPICA does not correctly enumerate power resources within a conditional block (due to delayed execution of such blocks) and as a result power_resources is set to false even if _PR3 exists. Fixes: 692a17dcc292 ("drm/nouveau/acpi: fix lockup with PCIe runtime PM") Link: https://bugs.freedesktop.org/show_bug.cgi?id=98398 Reported-and-tested-by: Rick Kerkhof Reviewed-by: Mika Westerberg Cc: stable@vger.kernel.org # v4.8+ Signed-off-by: Peter Wu Signed-off-by: Dave Airlie --- drivers/gpu/drm/nouveau/nouveau_acpi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_acpi.c b/drivers/gpu/drm/nouveau/nouveau_acpi.c index dc57b628e074..193573d191e5 100644 --- a/drivers/gpu/drm/nouveau/nouveau_acpi.c +++ b/drivers/gpu/drm/nouveau/nouveau_acpi.c @@ -240,7 +240,8 @@ static bool nouveau_pr3_present(struct pci_dev *pdev) if (!parent_adev) return false; - return acpi_has_method(parent_adev->handle, "_PR3"); + return parent_adev->power.flags.power_resources && + acpi_has_method(parent_adev->handle, "_PR3"); } static void nouveau_dsm_pci_probe(struct pci_dev *pdev, acpi_handle *dhandle_out, From c25badc9ceb612c6cc227a6fc4b0aaf678e3bcf9 Mon Sep 17 00:00:00 2001 From: Laura Abbott Date: Wed, 19 Oct 2016 15:53:52 -0700 Subject: [PATCH 253/792] cpupower: Correct return type of cpu_power_is_cpu_online() in cpufreq-set When converting to a shared library in ac5a181d065d ("cpupower: Add cpuidle parts into library"), cpu_freq_cpu_exists() was converted to cpupower_is_cpu_online(). cpu_req_cpu_exists() returned 0 on success and -ENOSYS on failure whereas cpupower_is_cpu_online returns 1 on success. Check for the correct return value in cpufreq-set. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1374212 Fixes: ac5a181d065d (cpupower: Add cpuidle parts into library) Reported-by: Julian Seward Signed-off-by: Laura Abbott Acked-by: Thomas Renninger Cc: 4.7+ # 4.7+ Signed-off-by: Rafael J. Wysocki --- tools/power/cpupower/utils/cpufreq-set.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/tools/power/cpupower/utils/cpufreq-set.c b/tools/power/cpupower/utils/cpufreq-set.c index b4bf76971dc9..1eef0aed6423 100644 --- a/tools/power/cpupower/utils/cpufreq-set.c +++ b/tools/power/cpupower/utils/cpufreq-set.c @@ -296,7 +296,7 @@ int cmd_freq_set(int argc, char **argv) struct cpufreq_affected_cpus *cpus; if (!bitmask_isbitset(cpus_chosen, cpu) || - cpupower_is_cpu_online(cpu)) + cpupower_is_cpu_online(cpu) != 1) continue; cpus = cpufreq_get_related_cpus(cpu); @@ -316,10 +316,7 @@ int cmd_freq_set(int argc, char **argv) cpu <= bitmask_last(cpus_chosen); cpu++) { if (!bitmask_isbitset(cpus_chosen, cpu) || - cpupower_is_cpu_online(cpu)) - continue; - - if (cpupower_is_cpu_online(cpu) != 1) + cpupower_is_cpu_online(cpu) != 1) continue; printf(_("Setting cpu: %d\n"), cpu); From fd9afd3cbe404998d732be6cc798f749597c5114 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Tue, 1 Nov 2016 13:20:22 +0200 Subject: [PATCH 254/792] usb: gadget: u_ether: remove interrupt throttling MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit According to Dave Miller "the networking stack has a hard requirement that all SKBs which are transmitted must have their completion signalled in a fininte amount of time. This is because, until the SKB is freed by the driver, it holds onto socket, netfilter, and other subsystem resources." In summary, this means that using TX IRQ throttling for the networking gadgets is, at least, complex and we should avoid it for the time being. Cc: Reported-by: Ville Syrjälä Tested-by: Ville Syrjälä Suggested-by: David Miller Signed-off-by: Felipe Balbi --- drivers/usb/gadget/function/u_ether.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c index fe1811650dbc..5d1bd13a56c1 100644 --- a/drivers/usb/gadget/function/u_ether.c +++ b/drivers/usb/gadget/function/u_ether.c @@ -588,14 +588,6 @@ static netdev_tx_t eth_start_xmit(struct sk_buff *skb, req->length = length; - /* throttle high/super speed IRQ rate back slightly */ - if (gadget_is_dualspeed(dev->gadget)) - req->no_interrupt = (((dev->gadget->speed == USB_SPEED_HIGH || - dev->gadget->speed == USB_SPEED_SUPER)) && - !list_empty(&dev->tx_reqs)) - ? ((atomic_read(&dev->tx_qlen) % dev->qmult) != 0) - : 0; - retval = usb_ep_queue(in, req, GFP_ATOMIC); switch (retval) { default: From d6124b409ca33c100170ffde51cd8dff761454a1 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 1 Nov 2016 12:13:31 +0100 Subject: [PATCH 255/792] uwb: fix device reference leaks This subsystem consistently fails to drop the device reference taken by class_find_device(). Note that some of these lookup functions already take a reference to the returned data, while others claim no reference is needed (or does not seem need one). Fixes: 183b9b592a62 ("uwb: add the UWB stack (core files)") Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/uwb/lc-rc.c | 16 +++++++++++++--- drivers/uwb/pal.c | 2 ++ 2 files changed, 15 insertions(+), 3 deletions(-) diff --git a/drivers/uwb/lc-rc.c b/drivers/uwb/lc-rc.c index d059ad4d0dbd..97ee1b46db69 100644 --- a/drivers/uwb/lc-rc.c +++ b/drivers/uwb/lc-rc.c @@ -56,8 +56,11 @@ static struct uwb_rc *uwb_rc_find_by_index(int index) struct uwb_rc *rc = NULL; dev = class_find_device(&uwb_rc_class, NULL, &index, uwb_rc_index_match); - if (dev) + if (dev) { rc = dev_get_drvdata(dev); + put_device(dev); + } + return rc; } @@ -467,7 +470,9 @@ struct uwb_rc *__uwb_rc_try_get(struct uwb_rc *target_rc) if (dev) { rc = dev_get_drvdata(dev); __uwb_rc_get(rc); + put_device(dev); } + return rc; } EXPORT_SYMBOL_GPL(__uwb_rc_try_get); @@ -520,8 +525,11 @@ struct uwb_rc *uwb_rc_get_by_grandpa(const struct device *grandpa_dev) dev = class_find_device(&uwb_rc_class, NULL, grandpa_dev, find_rc_grandpa); - if (dev) + if (dev) { rc = dev_get_drvdata(dev); + put_device(dev); + } + return rc; } EXPORT_SYMBOL_GPL(uwb_rc_get_by_grandpa); @@ -553,8 +561,10 @@ struct uwb_rc *uwb_rc_get_by_dev(const struct uwb_dev_addr *addr) struct uwb_rc *rc = NULL; dev = class_find_device(&uwb_rc_class, NULL, addr, find_rc_dev); - if (dev) + if (dev) { rc = dev_get_drvdata(dev); + put_device(dev); + } return rc; } diff --git a/drivers/uwb/pal.c b/drivers/uwb/pal.c index c1304b8d4985..678e93741ae1 100644 --- a/drivers/uwb/pal.c +++ b/drivers/uwb/pal.c @@ -97,6 +97,8 @@ static bool uwb_rc_class_device_exists(struct uwb_rc *target_rc) dev = class_find_device(&uwb_rc_class, NULL, target_rc, find_rc); + put_device(dev); + return (dev != NULL); } From f6b2db084b65b9dc0f910bc48d5f77c0e5166dc6 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 1 Nov 2016 00:01:59 -0700 Subject: [PATCH 256/792] vmbus: make sysfs names consistent with PCI In commit 9a56e5d6a0ba ("Drivers: hv: make VMBus bus ids persistent") the name of vmbus devices in sysfs changed to be (in 4.9-rc1): /sys/bus/vmbus/vmbus-6aebe374-9ba0-11e6-933c-00259086b36b The prefix ("vmbus-") is redundant and differs from how PCI is represented in sysfs. Therefore simplify to: /sys/bus/vmbus/6aebe374-9ba0-11e6-933c-00259086b36b Please merge this before 4.9 is released and the old format has to live forever. Signed-off-by: Stephen Hemminger Signed-off-by: K. Y. Srinivasan Signed-off-by: Greg Kroah-Hartman --- drivers/hv/vmbus_drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c index a259e18d22d5..0276d2ef06ee 100644 --- a/drivers/hv/vmbus_drv.c +++ b/drivers/hv/vmbus_drv.c @@ -961,7 +961,7 @@ int vmbus_device_register(struct hv_device *child_device_obj) { int ret = 0; - dev_set_name(&child_device_obj->device, "vmbus-%pUl", + dev_set_name(&child_device_obj->device, "%pUl", child_device_obj->channel->offermsg.offer.if_instance.b); child_device_obj->device.bus = &hv_bus; From 4efca4ed05cbdfd13ec3e8cb623fb77d6e4ab187 Mon Sep 17 00:00:00 2001 From: Nicholas Piggin Date: Tue, 1 Nov 2016 12:46:19 +1100 Subject: [PATCH 257/792] kbuild: modversions for EXPORT_SYMBOL() for asm Allow architectures to create asm/asm-prototypes.h file that provides C prototypes for exported asm functions, which enables proper CRC versions to be generated for them. Signed-off-by: Nicholas Piggin Signed-off-by: Michal Marek --- scripts/Makefile.build | 78 ++++++++++++++++++++++++++++++++++++++---- 1 file changed, 72 insertions(+), 6 deletions(-) diff --git a/scripts/Makefile.build b/scripts/Makefile.build index e1f25d6d132e..3e223c264469 100644 --- a/scripts/Makefile.build +++ b/scripts/Makefile.build @@ -159,7 +159,8 @@ cmd_cpp_i_c = $(CPP) $(c_flags) -o $@ $< $(obj)/%.i: $(src)/%.c FORCE $(call if_changed_dep,cpp_i_c) -cmd_gensymtypes = \ +# These mirror gensymtypes_S and co below, keep them in synch. +cmd_gensymtypes_c = \ $(CPP) -D__GENKSYMS__ $(c_flags) $< | \ $(GENKSYMS) $(if $(1), -T $(2)) \ $(patsubst y,-s _,$(CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX)) \ @@ -169,7 +170,7 @@ cmd_gensymtypes = \ quiet_cmd_cc_symtypes_c = SYM $(quiet_modtag) $@ cmd_cc_symtypes_c = \ set -e; \ - $(call cmd_gensymtypes,true,$@) >/dev/null; \ + $(call cmd_gensymtypes_c,true,$@) >/dev/null; \ test -s $@ || rm -f $@ $(obj)/%.symtypes : $(src)/%.c FORCE @@ -198,9 +199,10 @@ else # the actual value of the checksum generated by genksyms cmd_cc_o_c = $(CC) $(c_flags) -c -o $(@D)/.tmp_$(@F) $< -cmd_modversions = \ + +cmd_modversions_c = \ if $(OBJDUMP) -h $(@D)/.tmp_$(@F) | grep -q __ksymtab; then \ - $(call cmd_gensymtypes,$(KBUILD_SYMTYPES),$(@:.o=.symtypes)) \ + $(call cmd_gensymtypes_c,$(KBUILD_SYMTYPES),$(@:.o=.symtypes)) \ > $(@D)/.tmp_$(@F:.o=.ver); \ \ $(LD) $(LDFLAGS) -r -o $@ $(@D)/.tmp_$(@F) \ @@ -268,13 +270,14 @@ endif # CONFIG_STACK_VALIDATION define rule_cc_o_c $(call echo-cmd,checksrc) $(cmd_checksrc) \ $(call cmd_and_fixdep,cc_o_c) \ - $(cmd_modversions) \ + $(cmd_modversions_c) \ $(cmd_objtool) \ $(call echo-cmd,record_mcount) $(cmd_record_mcount) endef define rule_as_o_S $(call cmd_and_fixdep,as_o_S) \ + $(cmd_modversions_S) \ $(cmd_objtool) endef @@ -314,6 +317,39 @@ modkern_aflags := $(KBUILD_AFLAGS_KERNEL) $(AFLAGS_KERNEL) $(real-objs-m) : modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE) $(real-objs-m:.o=.s): modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE) +# .S file exports must have their C prototypes defined in asm/asm-prototypes.h +# or a file that it includes, in order to get versioned symbols. We build a +# dummy C file that includes asm-prototypes and the EXPORT_SYMBOL lines from +# the .S file (with trailing ';'), and run genksyms on that, to extract vers. +# +# This is convoluted. The .S file must first be preprocessed to run guards and +# expand names, then the resulting exports must be constructed into plain +# EXPORT_SYMBOL(symbol); to build our dummy C file, and that gets preprocessed +# to make the genksyms input. +# +# These mirror gensymtypes_c and co above, keep them in synch. +cmd_gensymtypes_S = \ + (echo "\#include " ; \ + echo "\#include " ; \ + $(CPP) $(a_flags) $< | \ + grep ^___EXPORT_SYMBOL | \ + sed 's/___EXPORT_SYMBOL \([a-zA-Z0-9_]*\),.*/EXPORT_SYMBOL(\1);/' ) | \ + $(CPP) -D__GENKSYMS__ $(c_flags) -xc - | \ + $(GENKSYMS) $(if $(1), -T $(2)) \ + $(patsubst y,-s _,$(CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX)) \ + $(if $(KBUILD_PRESERVE),-p) \ + -r $(firstword $(wildcard $(2:.symtypes=.symref) /dev/null)) + +quiet_cmd_cc_symtypes_S = SYM $(quiet_modtag) $@ +cmd_cc_symtypes_S = \ + set -e; \ + $(call cmd_gensymtypes_S,true,$@) >/dev/null; \ + test -s $@ || rm -f $@ + +$(obj)/%.symtypes : $(src)/%.S FORCE + $(call cmd,cc_symtypes_S) + + quiet_cmd_cpp_s_S = CPP $(quiet_modtag) $@ cmd_cpp_s_S = $(CPP) $(a_flags) -o $@ $< @@ -321,7 +357,37 @@ $(obj)/%.s: $(src)/%.S FORCE $(call if_changed_dep,cpp_s_S) quiet_cmd_as_o_S = AS $(quiet_modtag) $@ -cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $< + +ifndef CONFIG_MODVERSIONS +cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $< + +else + +ASM_PROTOTYPES := $(wildcard $(srctree)/arch/$(SRCARCH)/include/asm/asm-prototypes.h) + +ifeq ($(ASM_PROTOTYPES),) +cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $< + +else + +# versioning matches the C process described above, with difference that +# we parse asm-prototypes.h C header to get function definitions. + +cmd_as_o_S = $(CC) $(a_flags) -c -o $(@D)/.tmp_$(@F) $< + +cmd_modversions_S = \ + if $(OBJDUMP) -h $(@D)/.tmp_$(@F) | grep -q __ksymtab; then \ + $(call cmd_gensymtypes_S,$(KBUILD_SYMTYPES),$(@:.o=.symtypes)) \ + > $(@D)/.tmp_$(@F:.o=.ver); \ + \ + $(LD) $(LDFLAGS) -r -o $@ $(@D)/.tmp_$(@F) \ + -T $(@D)/.tmp_$(@F:.o=.ver); \ + rm -f $(@D)/.tmp_$(@F) $(@D)/.tmp_$(@F:.o=.ver); \ + else \ + mv -f $(@D)/.tmp_$(@F) $@; \ + fi; +endif +endif $(obj)/%.o: $(src)/%.S $(objtool_obj) FORCE $(call if_changed_rule,as_o_S) From b5a4a3eb4ec7382780aa153224780b9ecdc76ceb Mon Sep 17 00:00:00 2001 From: Iyappan Subramanian Date: Mon, 31 Oct 2016 16:00:26 -0700 Subject: [PATCH 258/792] drivers: net: xgene: fix: Disable coalescing on v1 hardware Since ethernet v1 hardware has a bug related to coalescing, disabling this feature. Signed-off-by: Iyappan Subramanian Signed-off-by: Toan Le Signed-off-by: David S. Miller --- drivers/net/ethernet/apm/xgene/xgene_enet_hw.c | 12 ------------ drivers/net/ethernet/apm/xgene/xgene_enet_main.c | 3 ++- 2 files changed, 2 insertions(+), 13 deletions(-) diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c b/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c index c481f104a8fe..5390ae89136c 100644 --- a/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c +++ b/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c @@ -204,17 +204,6 @@ static u32 xgene_enet_ring_len(struct xgene_enet_desc_ring *ring) return num_msgs; } -static void xgene_enet_setup_coalescing(struct xgene_enet_desc_ring *ring) -{ - u32 data = 0x7777; - - xgene_enet_ring_wr32(ring, CSR_PBM_COAL, 0x8e); - xgene_enet_ring_wr32(ring, CSR_PBM_CTICK1, data); - xgene_enet_ring_wr32(ring, CSR_PBM_CTICK2, data << 16); - xgene_enet_ring_wr32(ring, CSR_THRESHOLD0_SET1, 0x40); - xgene_enet_ring_wr32(ring, CSR_THRESHOLD1_SET1, 0x80); -} - void xgene_enet_parse_error(struct xgene_enet_desc_ring *ring, struct xgene_enet_pdata *pdata, enum xgene_enet_err_code status) @@ -929,5 +918,4 @@ struct xgene_ring_ops xgene_ring1_ops = { .clear = xgene_enet_clear_ring, .wr_cmd = xgene_enet_wr_cmd, .len = xgene_enet_ring_len, - .coalesce = xgene_enet_setup_coalescing, }; diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_main.c b/drivers/net/ethernet/apm/xgene/xgene_enet_main.c index 429f18fc5503..8158d4698734 100644 --- a/drivers/net/ethernet/apm/xgene/xgene_enet_main.c +++ b/drivers/net/ethernet/apm/xgene/xgene_enet_main.c @@ -1188,7 +1188,8 @@ static int xgene_enet_create_desc_rings(struct net_device *ndev) tx_ring->dst_ring_num = xgene_enet_dst_ring_num(cp_ring); } - pdata->ring_ops->coalesce(pdata->tx_ring[0]); + if (pdata->ring_ops->coalesce) + pdata->ring_ops->coalesce(pdata->tx_ring[0]); pdata->tx_qcnt_hi = pdata->tx_ring[0]->slots - 128; return 0; From f126df8503275facc96dd05a818086afbb89b77d Mon Sep 17 00:00:00 2001 From: Iyappan Subramanian Date: Mon, 31 Oct 2016 16:00:27 -0700 Subject: [PATCH 259/792] drivers: net: xgene: fix: Coalescing values for v2 hardware Changing the interrupt trigger region id to 2 and the corresponding threshold set0/set1 values to 8/16. Signed-off-by: Iyappan Subramanian Signed-off-by: Toan Le Signed-off-by: David S. Miller --- drivers/net/ethernet/apm/xgene/xgene_enet_hw.h | 2 ++ drivers/net/ethernet/apm/xgene/xgene_enet_ring2.c | 12 +++++++----- 2 files changed, 9 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_hw.h b/drivers/net/ethernet/apm/xgene/xgene_enet_hw.h index 8456337a237d..06e598c8bc16 100644 --- a/drivers/net/ethernet/apm/xgene/xgene_enet_hw.h +++ b/drivers/net/ethernet/apm/xgene/xgene_enet_hw.h @@ -55,8 +55,10 @@ enum xgene_enet_rm { #define PREFETCH_BUF_EN BIT(21) #define CSR_RING_ID_BUF 0x000c #define CSR_PBM_COAL 0x0014 +#define CSR_PBM_CTICK0 0x0018 #define CSR_PBM_CTICK1 0x001c #define CSR_PBM_CTICK2 0x0020 +#define CSR_PBM_CTICK3 0x0024 #define CSR_THRESHOLD0_SET1 0x0030 #define CSR_THRESHOLD1_SET1 0x0034 #define CSR_RING_NE_INT_MODE 0x017c diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_ring2.c b/drivers/net/ethernet/apm/xgene/xgene_enet_ring2.c index 2b76732add5d..af51dd5844ce 100644 --- a/drivers/net/ethernet/apm/xgene/xgene_enet_ring2.c +++ b/drivers/net/ethernet/apm/xgene/xgene_enet_ring2.c @@ -30,7 +30,7 @@ static void xgene_enet_ring_init(struct xgene_enet_desc_ring *ring) ring_cfg[0] |= SET_VAL(X2_INTLINE, ring->id & RING_BUFNUM_MASK); ring_cfg[3] |= SET_BIT(X2_DEQINTEN); } - ring_cfg[0] |= SET_VAL(X2_CFGCRID, 1); + ring_cfg[0] |= SET_VAL(X2_CFGCRID, 2); addr >>= 8; ring_cfg[2] |= QCOHERENT | SET_VAL(RINGADDRL, addr); @@ -192,13 +192,15 @@ static u32 xgene_enet_ring_len(struct xgene_enet_desc_ring *ring) static void xgene_enet_setup_coalescing(struct xgene_enet_desc_ring *ring) { - u32 data = 0x7777; + u32 data = 0x77777777; xgene_enet_ring_wr32(ring, CSR_PBM_COAL, 0x8e); + xgene_enet_ring_wr32(ring, CSR_PBM_CTICK0, data); xgene_enet_ring_wr32(ring, CSR_PBM_CTICK1, data); - xgene_enet_ring_wr32(ring, CSR_PBM_CTICK2, data << 16); - xgene_enet_ring_wr32(ring, CSR_THRESHOLD0_SET1, 0x40); - xgene_enet_ring_wr32(ring, CSR_THRESHOLD1_SET1, 0x80); + xgene_enet_ring_wr32(ring, CSR_PBM_CTICK2, data); + xgene_enet_ring_wr32(ring, CSR_PBM_CTICK3, data); + xgene_enet_ring_wr32(ring, CSR_THRESHOLD0_SET1, 0x08); + xgene_enet_ring_wr32(ring, CSR_THRESHOLD1_SET1, 0x10); } struct xgene_ring_ops xgene_ring2_ops = { From 7bb9f731d1026bd48b84cee7853cba7f5678193c Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Mon, 31 Oct 2016 18:18:42 -0500 Subject: [PATCH 260/792] net: qcom/emac: use correct value for SGMII_LN_UCDR_SO_GAIN_MODE0 The documentation says that SGMII_LN_UCDR_SO_GAIN_MODE0 should be set to 0, not 6, on the Qualcomm Technologies QDF2432. Signed-off-by: Timur Tabi Signed-off-by: David S. Miller --- drivers/net/ethernet/qualcomm/emac/emac-sgmii.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c b/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c index 75c1b530e39e..72fe343c7a36 100644 --- a/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c +++ b/drivers/net/ethernet/qualcomm/emac/emac-sgmii.c @@ -421,7 +421,7 @@ static const struct emac_reg_write sgmii_v2_laned[] = { /* CDR Settings */ {EMAC_SGMII_LN_UCDR_FO_GAIN_MODE0, UCDR_STEP_BY_TWO_MODE0 | UCDR_xO_GAIN_MODE(10)}, - {EMAC_SGMII_LN_UCDR_SO_GAIN_MODE0, UCDR_xO_GAIN_MODE(6)}, + {EMAC_SGMII_LN_UCDR_SO_GAIN_MODE0, UCDR_xO_GAIN_MODE(0)}, {EMAC_SGMII_LN_UCDR_SO_CONFIG, UCDR_ENABLE | UCDR_SO_SATURATION(12)}, /* TX/RX Settings */ From e7947ea770d0de434d38a0f823e660d3fd4bebb5 Mon Sep 17 00:00:00 2001 From: Isaac Boukris Date: Tue, 1 Nov 2016 02:41:35 +0200 Subject: [PATCH 261/792] unix: escape all null bytes in abstract unix domain socket Abstract unix domain socket may embed null characters, these should be translated to '@' when printed out to proc the same way the null prefix is currently being translated. This helps for tools such as netstat, lsof and the proc based implementation in ss to show all the significant bytes of the name (instead of getting cut at the first null occurrence). Signed-off-by: Isaac Boukris Signed-off-by: David S. Miller --- net/unix/af_unix.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index 145082e2ba36..5d1c14a2f268 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -2812,7 +2812,8 @@ static int unix_seq_show(struct seq_file *seq, void *v) i++; } for ( ; i < len; i++) - seq_putc(seq, u->addr->name->sun_path[i]); + seq_putc(seq, u->addr->name->sun_path[i] ?: + '@'); } unix_state_unlock(s); seq_putc(seq, '\n'); From 42fb18fd5852dba9c43ac008558e4bc8062bda57 Mon Sep 17 00:00:00 2001 From: Christophe Jaillet Date: Tue, 1 Nov 2016 08:10:53 +0100 Subject: [PATCH 262/792] net/mlx5: Simplify a test 'create_root_ns()' does not return an error pointer, so the test can be simplified to be more consistent. Signed-off-by: Christophe JAILLET Acked-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c index 89696048b045..914e5466f729 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c @@ -1690,7 +1690,7 @@ static int init_root_ns(struct mlx5_flow_steering *steering) { steering->root_ns = create_root_ns(steering, FS_FT_NIC_RX); - if (IS_ERR_OR_NULL(steering->root_ns)) + if (!steering->root_ns) goto cleanup; if (init_root_tree(steering, &root_fs, &steering->root_ns->ns.node)) From b9b84fc07dbc6ac74d85f1b1a401b41c403fecb1 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 1 Nov 2016 10:50:01 +0000 Subject: [PATCH 263/792] net: mv643xx_eth: ensure coalesce settings survive read-modify-write The coalesce settings behave badly when changing just one value: ... # ethtool -c eth0 rx-usecs: 249 ... # ethtool -C eth0 tx-usecs 250 ... # ethtool -c eth0 rx-usecs: 248 This occurs due to rounding errors when calculating the microseconds value - the divisons round down. This causes (eg) the rx-usecs to decrease by one every time the tx-usecs value is set as per the above. Fix this by making the divison round-to-nearest. Signed-off-by: Russell King Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/mv643xx_eth.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/marvell/mv643xx_eth.c b/drivers/net/ethernet/marvell/mv643xx_eth.c index bf5cc55ba24c..5b12022adf1f 100644 --- a/drivers/net/ethernet/marvell/mv643xx_eth.c +++ b/drivers/net/ethernet/marvell/mv643xx_eth.c @@ -1381,6 +1381,7 @@ static unsigned int get_rx_coal(struct mv643xx_eth_private *mp) temp = (val & 0x003fff00) >> 8; temp *= 64000000; + temp += mp->t_clk / 2; do_div(temp, mp->t_clk); return (unsigned int)temp; @@ -1417,6 +1418,7 @@ static unsigned int get_tx_coal(struct mv643xx_eth_private *mp) temp = (rdlp(mp, TX_FIFO_URGENT_THRESHOLD) & 0x3fff0) >> 4; temp *= 64000000; + temp += mp->t_clk / 2; do_div(temp, mp->t_clk); return (unsigned int)temp; From 8ec4b736d709562193566156c0dd40e327df2cbb Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 29 Oct 2016 08:10:03 -0200 Subject: [PATCH 264/792] Documentation/ABI: ibm_rtl: The "What:" fields are incomplete The "What:" field at the ABI should describe the location of the ABI, e. g. the position under a mounted sysfs. However, this file has only the basename without the path. Fix it. Cc: Vernon Mauery Cc: platform-driver-x86@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Darren Hart --- Documentation/ABI/testing/sysfs-devices-system-ibm-rtl | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/ABI/testing/sysfs-devices-system-ibm-rtl b/Documentation/ABI/testing/sysfs-devices-system-ibm-rtl index b82deeaec314..470def06ab0a 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-ibm-rtl +++ b/Documentation/ABI/testing/sysfs-devices-system-ibm-rtl @@ -1,4 +1,4 @@ -What: state +What: /sys/devices/system/ibm_rtl/state Date: Sep 2010 KernelVersion: 2.6.37 Contact: Vernon Mauery @@ -10,7 +10,7 @@ Description: The state file allows a means by which to change in and Users: The ibm-prtm userspace daemon uses this interface. -What: version +What: /sys/devices/system/ibm_rtl/version Date: Sep 2010 KernelVersion: 2.6.37 Contact: Vernon Mauery From 1fdd14279eab2e9f79745631379f0c53cb8f9a5a Mon Sep 17 00:00:00 2001 From: "tang.junhui" Date: Fri, 28 Oct 2016 15:54:07 +0800 Subject: [PATCH 265/792] scsi: scsi_dh_alua: fix missing kref_put() in alua_rtpg_work() Reference count of pg leaks in alua_rtpg_work() since kref_put() is not called to decrease the reference count of pg when the condition pg->rtpg_sdev==NULL satisfied (actually it is easy to satisfy), it would cause memory of pg leakage. Signed-off-by: tang.junhui Cc: Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen --- drivers/scsi/device_handler/scsi_dh_alua.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c index 241829e59668..f375167f16ea 100644 --- a/drivers/scsi/device_handler/scsi_dh_alua.c +++ b/drivers/scsi/device_handler/scsi_dh_alua.c @@ -793,6 +793,7 @@ static void alua_rtpg_work(struct work_struct *work) WARN_ON(pg->flags & ALUA_PG_RUN_RTPG); WARN_ON(pg->flags & ALUA_PG_RUN_STPG); spin_unlock_irqrestore(&pg->lock, flags); + kref_put(&pg->kref, release_port_group); return; } if (pg->flags & ALUA_SYNC_STPG) From 6d3a56ed098566bc83d6c2afa74b4199c12ea074 Mon Sep 17 00:00:00 2001 From: Sreekanth Reddy Date: Fri, 28 Oct 2016 10:09:12 +0530 Subject: [PATCH 266/792] scsi: mpt3sas: Fix for block device of raid exists even after deleting raid disk While merging mpt3sas & mpt2sas code, we added the is_warpdrive check condition on the wrong line --------------------------------------------------------------------------- scsih_target_alloc(struct scsi_target *starget) sas_target_priv_data->handle = raid_device->handle; sas_target_priv_data->sas_address = raid_device->wwid; sas_target_priv_data->flags |= MPT_TARGET_FLAGS_VOLUME; - raid_device->starget = starget; + sas_target_priv_data->raid_device = raid_device; + if (ioc->is_warpdrive) + raid_device->starget = starget; } spin_unlock_irqrestore(&ioc->raid_device_lock, flags); return 0; ------------------------------------------------------------------------------ That check should be for the line sas_target_priv_data->raid_device = raid_device; Due to above hunk, we are not initializing raid_device's starget for raid volumes, and so during raid disk deletion driver is not calling scsi_remove_target() API as driver observes starget field of raid_device's structure as NULL. Signed-off-by: Sreekanth Reddy Cc: # v4.4+ Fixes: 7786ab6aff9 ("mpt3sas: Ported WarpDrive product SSS6200 support") Signed-off-by: Martin K. Petersen --- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 209a969a979d..8aa769a2d919 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -1273,9 +1273,9 @@ scsih_target_alloc(struct scsi_target *starget) sas_target_priv_data->handle = raid_device->handle; sas_target_priv_data->sas_address = raid_device->wwid; sas_target_priv_data->flags |= MPT_TARGET_FLAGS_VOLUME; - sas_target_priv_data->raid_device = raid_device; if (ioc->is_warpdrive) - raid_device->starget = starget; + sas_target_priv_data->raid_device = raid_device; + raid_device->starget = starget; } spin_unlock_irqrestore(&ioc->raid_device_lock, flags); return 0; From aac173e9618faadf8f92af6cc05e64f7acc64d79 Mon Sep 17 00:00:00 2001 From: David Jeffery Date: Fri, 28 Oct 2016 12:27:26 -0400 Subject: [PATCH 267/792] scsi: vmw_pvscsi: return SUCCESS for successful command aborts The vmw_pvscsi driver reports most successful aborts as FAILED to the scsi error handler. This is do to a misunderstanding of how completion_done() works and its interaction with a successful wait using wait_for_completion_timeout(). The vmw_pvscsi driver is expecting completion_done() to always return true if complete() has been called on the completion structure. But completion_done() returns true after complete() has been called only if no function like wait_for_completion_timeout() has seen the completion and cleared it as part of successfully waiting for the completion. Instead of using completion_done(), vmw_pvscsi should just use the return value from wait_for_completion_timeout() to know if the wait timed out or not. [mkp: bumped driver version per request] Signed-off-by: David Jeffery Reviewed-by: Laurence Oberman Reviewed-by: Ewan D. Milne Acked-by: Jim Gill Signed-off-by: Martin K. Petersen --- drivers/scsi/vmw_pvscsi.c | 5 +++-- drivers/scsi/vmw_pvscsi.h | 2 +- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/vmw_pvscsi.c b/drivers/scsi/vmw_pvscsi.c index 4a0d3cdc607c..15ca09cd16f3 100644 --- a/drivers/scsi/vmw_pvscsi.c +++ b/drivers/scsi/vmw_pvscsi.c @@ -793,6 +793,7 @@ static int pvscsi_abort(struct scsi_cmnd *cmd) unsigned long flags; int result = SUCCESS; DECLARE_COMPLETION_ONSTACK(abort_cmp); + int done; scmd_printk(KERN_DEBUG, cmd, "task abort on host %u, %p\n", adapter->host->host_no, cmd); @@ -824,10 +825,10 @@ static int pvscsi_abort(struct scsi_cmnd *cmd) pvscsi_abort_cmd(adapter, ctx); spin_unlock_irqrestore(&adapter->hw_lock, flags); /* Wait for 2 secs for the completion. */ - wait_for_completion_timeout(&abort_cmp, msecs_to_jiffies(2000)); + done = wait_for_completion_timeout(&abort_cmp, msecs_to_jiffies(2000)); spin_lock_irqsave(&adapter->hw_lock, flags); - if (!completion_done(&abort_cmp)) { + if (!done) { /* * Failed to abort the command, unmark the fact that it * was requested to be aborted. diff --git a/drivers/scsi/vmw_pvscsi.h b/drivers/scsi/vmw_pvscsi.h index c097d2ccbde3..d41292ef85f2 100644 --- a/drivers/scsi/vmw_pvscsi.h +++ b/drivers/scsi/vmw_pvscsi.h @@ -26,7 +26,7 @@ #include -#define PVSCSI_DRIVER_VERSION_STRING "1.0.6.0-k" +#define PVSCSI_DRIVER_VERSION_STRING "1.0.7.0-k" #define PVSCSI_MAX_NUM_SG_ENTRIES_PER_SEGMENT 128 From df3d422cbac685da882e4c239dfda07de33d431b Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Tue, 1 Nov 2016 08:19:57 -0600 Subject: [PATCH 268/792] scsi: scsi_dh_alua: Fix a reference counting bug The code at the end of alua_rtpg_work() is as follows: scsi_device_put(sdev); kref_put(&pg->kref, release_port_group); In other words, alua_rtpg_queue() must hold an sdev reference and a pg reference before queueing rtpg work. If no rtpg work is queued no additional references should be held when alua_rtpg_queue() returns. If no rtpg work is queued, ensure that alua_rtpg_queue() only gives up the sdev reference if that reference was obtained by the same alua_rtpg_queue() call. Signed-off-by: Bart Van Assche Reported-by: Tang Junhui Cc: Hannes Reinecke Cc: Tang Junhui Cc: Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen --- drivers/scsi/device_handler/scsi_dh_alua.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c index f375167f16ea..7bb20684e9fa 100644 --- a/drivers/scsi/device_handler/scsi_dh_alua.c +++ b/drivers/scsi/device_handler/scsi_dh_alua.c @@ -891,6 +891,7 @@ static void alua_rtpg_queue(struct alua_port_group *pg, /* Do not queue if the worker is already running */ if (!(pg->flags & ALUA_PG_RUNNING)) { kref_get(&pg->kref); + sdev = NULL; start_queue = 1; } } @@ -902,7 +903,8 @@ static void alua_rtpg_queue(struct alua_port_group *pg, if (start_queue && !queue_delayed_work(alua_wq, &pg->rtpg_work, msecs_to_jiffies(ALUA_RTPG_DELAY_MSECS))) { - scsi_device_put(sdev); + if (sdev) + scsi_device_put(sdev); kref_put(&pg->kref, release_port_group); } } From 812d47889a8e418d7bea9bec383581a34c19183e Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Wed, 19 Oct 2016 15:03:41 -0600 Subject: [PATCH 269/792] gpio/mvebu: Use irq_domain_add_linear This fixes the irq allocation in this driver to not print: irq: Cannot allocate irq_descs @ IRQ34, assuming pre-allocated irq: Cannot allocate irq_descs @ IRQ66, assuming pre-allocated Which happens because the driver already called irq_alloc_descs() and so the change to use irq_domain_add_simple resulted in calling irq_alloc_descs() twice. Modernize the irq allocation in this driver to use the irq_domain_add_linear flow directly and eliminate the use of irq_domain_add_simple/legacy Fixes: ce931f571b6d ("gpio/mvebu: convert to use irq_domain_add_simple()") Signed-off-by: Jason Gunthorpe Signed-off-by: Linus Walleij --- drivers/gpio/gpio-mvebu.c | 92 ++++++++++++++++++--------------------- 1 file changed, 43 insertions(+), 49 deletions(-) diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c index cd5dc27320a2..1ed6132b993c 100644 --- a/drivers/gpio/gpio-mvebu.c +++ b/drivers/gpio/gpio-mvebu.c @@ -293,10 +293,10 @@ static void mvebu_gpio_irq_ack(struct irq_data *d) { struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); struct mvebu_gpio_chip *mvchip = gc->private; - u32 mask = ~(1 << (d->irq - gc->irq_base)); + u32 mask = d->mask; irq_gc_lock(gc); - writel_relaxed(mask, mvebu_gpioreg_edge_cause(mvchip)); + writel_relaxed(~mask, mvebu_gpioreg_edge_cause(mvchip)); irq_gc_unlock(gc); } @@ -305,7 +305,7 @@ static void mvebu_gpio_edge_irq_mask(struct irq_data *d) struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); struct mvebu_gpio_chip *mvchip = gc->private; struct irq_chip_type *ct = irq_data_get_chip_type(d); - u32 mask = 1 << (d->irq - gc->irq_base); + u32 mask = d->mask; irq_gc_lock(gc); ct->mask_cache_priv &= ~mask; @@ -319,8 +319,7 @@ static void mvebu_gpio_edge_irq_unmask(struct irq_data *d) struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); struct mvebu_gpio_chip *mvchip = gc->private; struct irq_chip_type *ct = irq_data_get_chip_type(d); - - u32 mask = 1 << (d->irq - gc->irq_base); + u32 mask = d->mask; irq_gc_lock(gc); ct->mask_cache_priv |= mask; @@ -333,8 +332,7 @@ static void mvebu_gpio_level_irq_mask(struct irq_data *d) struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); struct mvebu_gpio_chip *mvchip = gc->private; struct irq_chip_type *ct = irq_data_get_chip_type(d); - - u32 mask = 1 << (d->irq - gc->irq_base); + u32 mask = d->mask; irq_gc_lock(gc); ct->mask_cache_priv &= ~mask; @@ -347,8 +345,7 @@ static void mvebu_gpio_level_irq_unmask(struct irq_data *d) struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); struct mvebu_gpio_chip *mvchip = gc->private; struct irq_chip_type *ct = irq_data_get_chip_type(d); - - u32 mask = 1 << (d->irq - gc->irq_base); + u32 mask = d->mask; irq_gc_lock(gc); ct->mask_cache_priv |= mask; @@ -462,7 +459,7 @@ static void mvebu_gpio_irq_handler(struct irq_desc *desc) for (i = 0; i < mvchip->chip.ngpio; i++) { int irq; - irq = mvchip->irqbase + i; + irq = irq_find_mapping(mvchip->domain, i); if (!(cause & (1 << i))) continue; @@ -655,6 +652,7 @@ static int mvebu_gpio_probe(struct platform_device *pdev) struct irq_chip_type *ct; struct clk *clk; unsigned int ngpios; + bool have_irqs; int soc_variant; int i, cpu, id; int err; @@ -665,6 +663,9 @@ static int mvebu_gpio_probe(struct platform_device *pdev) else soc_variant = MVEBU_GPIO_SOC_VARIANT_ORION; + /* Some gpio controllers do not provide irq support */ + have_irqs = of_irq_count(np) != 0; + mvchip = devm_kzalloc(&pdev->dev, sizeof(struct mvebu_gpio_chip), GFP_KERNEL); if (!mvchip) @@ -697,7 +698,8 @@ static int mvebu_gpio_probe(struct platform_device *pdev) mvchip->chip.get = mvebu_gpio_get; mvchip->chip.direction_output = mvebu_gpio_direction_output; mvchip->chip.set = mvebu_gpio_set; - mvchip->chip.to_irq = mvebu_gpio_to_irq; + if (have_irqs) + mvchip->chip.to_irq = mvebu_gpio_to_irq; mvchip->chip.base = id * MVEBU_MAX_GPIO_PER_BANK; mvchip->chip.ngpio = ngpios; mvchip->chip.can_sleep = false; @@ -758,34 +760,30 @@ static int mvebu_gpio_probe(struct platform_device *pdev) devm_gpiochip_add_data(&pdev->dev, &mvchip->chip, mvchip); /* Some gpio controllers do not provide irq support */ - if (!of_irq_count(np)) + if (!have_irqs) return 0; - /* Setup the interrupt handlers. Each chip can have up to 4 - * interrupt handlers, with each handler dealing with 8 GPIO - * pins. */ - for (i = 0; i < 4; i++) { - int irq = platform_get_irq(pdev, i); - - if (irq < 0) - continue; - irq_set_chained_handler_and_data(irq, mvebu_gpio_irq_handler, - mvchip); + mvchip->domain = + irq_domain_add_linear(np, ngpios, &irq_generic_chip_ops, NULL); + if (!mvchip->domain) { + dev_err(&pdev->dev, "couldn't allocate irq domain %s (DT).\n", + mvchip->chip.label); + return -ENODEV; } - mvchip->irqbase = irq_alloc_descs(-1, 0, ngpios, -1); - if (mvchip->irqbase < 0) { - dev_err(&pdev->dev, "no irqs\n"); - return mvchip->irqbase; - } - - gc = irq_alloc_generic_chip("mvebu_gpio_irq", 2, mvchip->irqbase, - mvchip->membase, handle_level_irq); - if (!gc) { - dev_err(&pdev->dev, "Cannot allocate generic irq_chip\n"); - return -ENOMEM; + err = irq_alloc_domain_generic_chips( + mvchip->domain, ngpios, 2, np->name, handle_level_irq, + IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_LEVEL, 0, 0); + if (err) { + dev_err(&pdev->dev, "couldn't allocate irq chips %s (DT).\n", + mvchip->chip.label); + goto err_domain; } + /* NOTE: The common accessors cannot be used because of the percpu + * access to the mask registers + */ + gc = irq_get_domain_generic_chip(mvchip->domain, 0); gc->private = mvchip; ct = &gc->chip_types[0]; ct->type = IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW; @@ -803,27 +801,23 @@ static int mvebu_gpio_probe(struct platform_device *pdev) ct->handler = handle_edge_irq; ct->chip.name = mvchip->chip.label; - irq_setup_generic_chip(gc, IRQ_MSK(ngpios), 0, - IRQ_NOREQUEST, IRQ_LEVEL | IRQ_NOPROBE); + /* Setup the interrupt handlers. Each chip can have up to 4 + * interrupt handlers, with each handler dealing with 8 GPIO + * pins. + */ + for (i = 0; i < 4; i++) { + int irq = platform_get_irq(pdev, i); - /* Setup irq domain on top of the generic chip. */ - mvchip->domain = irq_domain_add_simple(np, mvchip->chip.ngpio, - mvchip->irqbase, - &irq_domain_simple_ops, - mvchip); - if (!mvchip->domain) { - dev_err(&pdev->dev, "couldn't allocate irq domain %s (DT).\n", - mvchip->chip.label); - err = -ENODEV; - goto err_generic_chip; + if (irq < 0) + continue; + irq_set_chained_handler_and_data(irq, mvebu_gpio_irq_handler, + mvchip); } return 0; -err_generic_chip: - irq_remove_generic_chip(gc, IRQ_MSK(ngpios), IRQ_NOREQUEST, - IRQ_LEVEL | IRQ_NOPROBE); - kfree(gc); +err_domain: + irq_domain_remove(mvchip->domain); return err; } From 8d42629be0cb6c58a5c77cd02e47974c0e724e63 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Fri, 28 Oct 2016 22:22:33 -0400 Subject: [PATCH 270/792] svcrdma: backchannel cannot share a page for send and rcv buffers The underlying transport releases the page pointed to by rq_buffer during xprt_rdma_bc_send_request. When the backchannel reply arrives, rq_rbuffer then points to freed memory. Fixes: 68778945e46f ('SUNRPC: Separate buffer pointers for RPC ...') Signed-off-by: Chuck Lever Cc: Jeff Layton Signed-off-by: J. Bruce Fields --- net/sunrpc/xprtrdma/svc_rdma_backchannel.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/net/sunrpc/xprtrdma/svc_rdma_backchannel.c b/net/sunrpc/xprtrdma/svc_rdma_backchannel.c index fc4535ead7c2..20027f8de129 100644 --- a/net/sunrpc/xprtrdma/svc_rdma_backchannel.c +++ b/net/sunrpc/xprtrdma/svc_rdma_backchannel.c @@ -177,19 +177,26 @@ xprt_rdma_bc_allocate(struct rpc_task *task) return -EINVAL; } + /* svc_rdma_sendto releases this page */ page = alloc_page(RPCRDMA_DEF_GFP); if (!page) return -ENOMEM; - rqst->rq_buffer = page_address(page); - rqst->rq_rbuffer = (char *)rqst->rq_buffer + rqst->rq_callsize; + + rqst->rq_rbuffer = kmalloc(rqst->rq_rcvsize, RPCRDMA_DEF_GFP); + if (!rqst->rq_rbuffer) { + put_page(page); + return -ENOMEM; + } return 0; } static void xprt_rdma_bc_free(struct rpc_task *task) { - /* No-op: ctxt and page have already been freed. */ + struct rpc_rqst *rqst = task->tk_rqstp; + + kfree(rqst->rq_rbuffer); } static int From f46c445b79906a9da55c13e0a6f6b6a006b892fe Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Sat, 29 Oct 2016 18:19:03 -0400 Subject: [PATCH 271/792] nfsd: Fix general protection fault in release_lock_stateid() When I push NFSv4.1 / RDMA hard, (xfstests generic/089, for example), I get this crash on the server: Oct 28 22:04:30 klimt kernel: general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC Oct 28 22:04:30 klimt kernel: Modules linked in: cts rpcsec_gss_krb5 iTCO_wdt iTCO_vendor_support sb_edac edac_core x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm btrfs irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd xor pcspkr raid6_pq i2c_i801 i2c_smbus lpc_ich mfd_core sg mei_me mei ioatdma shpchp wmi ipmi_si ipmi_msghandler rpcrdma ib_ipoib rdma_ucm acpi_power_meter acpi_pad ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c mlx4_ib mlx4_en ib_core sr_mod cdrom sd_mod ast drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm crc32c_intel igb ahci libahci ptp mlx4_core pps_core dca libata i2c_algo_bit i2c_core dm_mirror dm_region_hash dm_log dm_mod Oct 28 22:04:30 klimt kernel: CPU: 7 PID: 1558 Comm: nfsd Not tainted 4.9.0-rc2-00005-g82cd754 #8 Oct 28 22:04:30 klimt kernel: Hardware name: Supermicro Super Server/X10SRL-F, BIOS 1.0c 09/09/2015 Oct 28 22:04:30 klimt kernel: task: ffff880835c3a100 task.stack: ffff8808420d8000 Oct 28 22:04:30 klimt kernel: RIP: 0010:[] [] release_lock_stateid+0x1f/0x60 [nfsd] Oct 28 22:04:30 klimt kernel: RSP: 0018:ffff8808420dbce0 EFLAGS: 00010246 Oct 28 22:04:30 klimt kernel: RAX: ffff88084e6660f0 RBX: ffff88084e667020 RCX: 0000000000000000 Oct 28 22:04:30 klimt kernel: RDX: 0000000000000007 RSI: 0000000000000000 RDI: ffff88084e667020 Oct 28 22:04:30 klimt kernel: RBP: ffff8808420dbcf8 R08: 0000000000000001 R09: 0000000000000000 Oct 28 22:04:30 klimt kernel: R10: ffff880835c3a100 R11: ffff880835c3aca8 R12: 6b6b6b6b6b6b6b6b Oct 28 22:04:30 klimt kernel: R13: ffff88084e6670d8 R14: ffff880835f546f0 R15: ffff880835f1c548 Oct 28 22:04:30 klimt kernel: FS: 0000000000000000(0000) GS:ffff88087bdc0000(0000) knlGS:0000000000000000 Oct 28 22:04:30 klimt kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Oct 28 22:04:30 klimt kernel: CR2: 00007ff020389000 CR3: 0000000001c06000 CR4: 00000000001406e0 Oct 28 22:04:30 klimt kernel: Stack: Oct 28 22:04:30 klimt kernel: ffff88084e667020 0000000000000000 ffff88084e6670d8 ffff8808420dbd20 Oct 28 22:04:30 klimt kernel: ffffffffa05ac80d ffff880835f54548 ffff88084e640008 ffff880835f545b0 Oct 28 22:04:30 klimt kernel: ffff8808420dbd70 ffffffffa059803d ffff880835f1c768 0000000000000870 Oct 28 22:04:30 klimt kernel: Call Trace: Oct 28 22:04:30 klimt kernel: [] nfsd4_free_stateid+0xfd/0x1b0 [nfsd] Oct 28 22:04:30 klimt kernel: [] nfsd4_proc_compound+0x40d/0x690 [nfsd] Oct 28 22:04:30 klimt kernel: [] nfsd_dispatch+0xd4/0x1d0 [nfsd] Oct 28 22:04:30 klimt kernel: [] svc_process_common+0x3d9/0x700 [sunrpc] Oct 28 22:04:30 klimt kernel: [] svc_process+0xf4/0x330 [sunrpc] Oct 28 22:04:30 klimt kernel: [] nfsd+0xfa/0x160 [nfsd] Oct 28 22:04:30 klimt kernel: [] ? nfsd_destroy+0x170/0x170 [nfsd] Oct 28 22:04:30 klimt kernel: [] kthread+0x10b/0x120 Oct 28 22:04:30 klimt kernel: [] ? kthread_stop+0x280/0x280 Oct 28 22:04:30 klimt kernel: [] ret_from_fork+0x2a/0x40 Oct 28 22:04:30 klimt kernel: Code: c3 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 55 41 54 53 48 8b 87 b0 00 00 00 48 89 fb 4c 8b a0 98 00 00 00 <49> 8b 44 24 20 48 8d b8 80 03 00 00 e8 10 66 1a e1 48 89 df e8 Oct 28 22:04:30 klimt kernel: RIP [] release_lock_stateid+0x1f/0x60 [nfsd] Oct 28 22:04:30 klimt kernel: RSP Oct 28 22:04:30 klimt kernel: ---[ end trace cf5d0b371973e167 ]--- Jeff Layton says: > Hm...now that I look though, this is a little suspicious: > > struct nfs4_openowner *oo = openowner(stp->st_openstp->st_stateowner); > > I wonder if it's possible for the openstateid to have already been > destroyed at this point. > > We might be better off doing something like this to get the client pointer: > > stp->st_stid.sc_client; > > ...which should be more direct and less dependent on other stateids > staying valid. With the suggested change, I am no longer able to reproduce the above oops. v2: Fix unhash_lock_stateid() as well Fix-suggested-by: Jeff Layton Fixes: 42691398be08 ('nfsd: Fix race between FREE_STATEID and LOCK') Signed-off-by: Chuck Lever Reviewed-by: Jeff Layton Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields --- fs/nfsd/nfs4state.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c index 95474196a17e..4b4beaaa4eaa 100644 --- a/fs/nfsd/nfs4state.c +++ b/fs/nfsd/nfs4state.c @@ -1227,9 +1227,7 @@ static void put_ol_stateid_locked(struct nfs4_ol_stateid *stp, static bool unhash_lock_stateid(struct nfs4_ol_stateid *stp) { - struct nfs4_openowner *oo = openowner(stp->st_openstp->st_stateowner); - - lockdep_assert_held(&oo->oo_owner.so_client->cl_lock); + lockdep_assert_held(&stp->st_stid.sc_client->cl_lock); list_del_init(&stp->st_locks); nfs4_unhash_stid(&stp->st_stid); @@ -1238,12 +1236,12 @@ static bool unhash_lock_stateid(struct nfs4_ol_stateid *stp) static void release_lock_stateid(struct nfs4_ol_stateid *stp) { - struct nfs4_openowner *oo = openowner(stp->st_openstp->st_stateowner); + struct nfs4_client *clp = stp->st_stid.sc_client; bool unhashed; - spin_lock(&oo->oo_owner.so_client->cl_lock); + spin_lock(&clp->cl_lock); unhashed = unhash_lock_stateid(stp); - spin_unlock(&oo->oo_owner.so_client->cl_lock); + spin_unlock(&clp->cl_lock); if (unhashed) nfs4_put_stid(&stp->st_stid); } From 3716a891d65cc04217da1af5f2bccb7eaf6092c2 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Tue, 1 Nov 2016 14:31:55 +0800 Subject: [PATCH 272/792] ASoC: sun4i-codec: Enable bus clock after getting GPIO In the current probe function the GPIO is acquired after the codec's bus clock is enabled. However if it fails to acquire the GPIO due to a deferred probe, it does not disable the bus clock before bailing out. This would result in the clock being enabled multiple times. Move the code that enables the bus clock after the part that gets the GPIO, maintaining a separation between resource acquisition and device enablement in the probe function. Signed-off-by: Chen-Yu Tsai Signed-off-by: Mark Brown --- sound/soc/sunxi/sun4i-codec.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/sound/soc/sunxi/sun4i-codec.c b/sound/soc/sunxi/sun4i-codec.c index a60707761abf..56ed9472e89f 100644 --- a/sound/soc/sunxi/sun4i-codec.c +++ b/sound/soc/sunxi/sun4i-codec.c @@ -829,12 +829,6 @@ static int sun4i_codec_probe(struct platform_device *pdev) return PTR_ERR(scodec->clk_module); } - /* Enable the bus clock */ - if (clk_prepare_enable(scodec->clk_apb)) { - dev_err(&pdev->dev, "Failed to enable the APB clock\n"); - return -EINVAL; - } - scodec->gpio_pa = devm_gpiod_get_optional(&pdev->dev, "allwinner,pa", GPIOD_OUT_LOW); if (IS_ERR(scodec->gpio_pa)) { @@ -844,6 +838,12 @@ static int sun4i_codec_probe(struct platform_device *pdev) return ret; } + /* Enable the bus clock */ + if (clk_prepare_enable(scodec->clk_apb)) { + dev_err(&pdev->dev, "Failed to enable the APB clock\n"); + return -EINVAL; + } + /* DMA configuration for TX FIFO */ scodec->playback_dma_data.addr = res->start + SUN4I_CODEC_DAC_TXDATA; scodec->playback_dma_data.maxburst = 4; From a5dd506e1584e91f3e7500ab9a165aa1b49eabd4 Mon Sep 17 00:00:00 2001 From: Bill Kuzeja Date: Fri, 21 Oct 2016 16:45:27 -0400 Subject: [PATCH 273/792] scsi: qla2xxx: Fix scsi scan hang triggered if adapter fails during init A system can get hung task timeouts if a qlogic board fails during initialization (if the board breaks again or fails the init). The hang involves the scsi scan. In a nutshell, since commit beb9e315e6e0 ("qla2xxx: Prevent removal and board_disable race"): ...it is possible to have freed ha (base_vha->hw) early by a call to qla2x00_remove_one when pdev->enable_cnt equals zero: if (!atomic_read(&pdev->enable_cnt)) { scsi_host_put(base_vha->host); kfree(ha); pci_set_drvdata(pdev, NULL); return; Almost always, the scsi_host_put above frees the vha structure (attached to the end of the Scsi_Host we're putting) since it's the last put, and life is good. However, if we are entering this routine because the adapter has broken sometime during initialization AND a scsi scan is already in progress (and has done its own scsi_host_get), vha will not be freed. What's worse, the scsi scan will access the freed ha structure through qla2xxx_scan_finished: if (time > vha->hw->loop_reset_delay * HZ) return 1; The scsi scan keeps checking to see if a scan is complete by calling qla2xxx_scan_finished. There is a timeout value that limits the length of time a scan can take (hw->loop_reset_delay, usually set to 5 seconds), but this definition is in the data structure (hw) that can get freed early. This can yield unpredictable results, the worst of which is that the scsi scan can hang indefinitely. This happens when the freed structure gets reused and loop_reset_delay gets overwritten with garbage, which the scan obliviously uses as its timeout value. The fix for this is simple: at the top of qla2xxx_scan_finished, check for the UNLOADING bit in the vha structure (_vha is not freed at this point). If UNLOADING is set, we exit the scan for this adapter immediately. After this last reference to the ha structure, we'll exit the scan for this adapter, and continue on. This problem is hard to hit, but I have run into it doing negative testing many times now (with a test specifically designed to bring it out), so I can verify that this fix works. My testing has been against a RHEL7 driver variant, but the bug and patch are equally relevant to to the upstream driver. Fixes: beb9e315e6e0 ("qla2xxx: Prevent removal and board_disable race") Cc: # v3.18+ Signed-off-by: Bill Kuzeja Acked-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_os.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index ace65db1d2a2..4d99c3b37687 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -2341,6 +2341,8 @@ qla2xxx_scan_finished(struct Scsi_Host *shost, unsigned long time) { scsi_qla_host_t *vha = shost_priv(shost); + if (test_bit(UNLOADING, &vha->dpc_flags)) + return 1; if (!vha->host) return 1; if (time > vha->hw->loop_reset_delay * HZ) From 5c2f117a22e46a4afee6ddee29b653a7a2a6b41f Mon Sep 17 00:00:00 2001 From: Emil Lundmark Date: Wed, 12 Oct 2016 12:31:40 +0200 Subject: [PATCH 274/792] clk: imx: fix integer overflow in AV PLL round rate Since 'parent_rate * mfn' may overflow 32 bits, the result should be stored using 64 bits. The problem was discovered when trying to set the rate of the audio PLL (pll4_post_div) on an i.MX6Q. The desired rate was 196.608 MHz, but the actual rate returned was 192.000570 MHz. The round rate function should have been able to return 196.608 MHz, i.e., the desired rate. Fixes: ba7f4f557eb6 ("clk: imx: correct AV PLL rate formula") Cc: Anson Huang Signed-off-by: Emil Lundmark Reviewed-by: Fabio Estevam Acked-by: Shawn Guo Signed-off-by: Stephen Boyd --- drivers/clk/imx/clk-pllv3.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/clk/imx/clk-pllv3.c b/drivers/clk/imx/clk-pllv3.c index 19f9b622981a..7a6acc3e4a92 100644 --- a/drivers/clk/imx/clk-pllv3.c +++ b/drivers/clk/imx/clk-pllv3.c @@ -223,7 +223,7 @@ static unsigned long clk_pllv3_av_recalc_rate(struct clk_hw *hw, temp64 *= mfn; do_div(temp64, mfd); - return (parent_rate * div) + (u32)temp64; + return parent_rate * div + (unsigned long)temp64; } static long clk_pllv3_av_round_rate(struct clk_hw *hw, unsigned long rate, @@ -247,7 +247,11 @@ static long clk_pllv3_av_round_rate(struct clk_hw *hw, unsigned long rate, do_div(temp64, parent_rate); mfn = temp64; - return parent_rate * div + parent_rate * mfn / mfd; + temp64 = (u64)parent_rate; + temp64 *= mfn; + do_div(temp64, mfd); + + return parent_rate * div + (unsigned long)temp64; } static int clk_pllv3_av_set_rate(struct clk_hw *hw, unsigned long rate, From 7c1c5413a7bdf1c9adc8d979521f1b8286366aef Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Mon, 17 Oct 2016 13:42:23 -0500 Subject: [PATCH 275/792] clk: qoriq: Don't allow CPU clocks higher than starting value The boot-time frequency of a CPU is considered its rated maximum, as we have no other source of such information. However, this was previously only used for chips with 80% restrictions on secondary PLLs. This usually wasn't a problem because most chips/configs boot with a divider of /1, with other dividers being used only for dynamic frequency reduction. However, at least one config (LS1021A at less than 1 GHz) uses a different divider for top speed. This was causing cpufreq to set a frequency beyond the chip's rated speed. This is fixed by applying a 100%-of-initial-speed limit to all CPU PLLs, similar to the existing 80% limit that only applied to some. Signed-off-by: Scott Wood Cc: stable@vger.kernel.org Signed-off-by: Stephen Boyd --- drivers/clk/clk-qoriq.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/clk/clk-qoriq.c b/drivers/clk/clk-qoriq.c index 20b105584f82..80ae2a51452d 100644 --- a/drivers/clk/clk-qoriq.c +++ b/drivers/clk/clk-qoriq.c @@ -700,6 +700,7 @@ static struct clk * __init create_mux_common(struct clockgen *cg, struct mux_hwclock *hwc, const struct clk_ops *ops, unsigned long min_rate, + unsigned long max_rate, unsigned long pct80_rate, const char *fmt, int idx) { @@ -728,6 +729,8 @@ static struct clk * __init create_mux_common(struct clockgen *cg, continue; if (rate < min_rate) continue; + if (rate > max_rate) + continue; parent_names[j] = div->name; hwc->parent_to_clksel[j] = i; @@ -759,7 +762,7 @@ static struct clk * __init create_one_cmux(struct clockgen *cg, int idx) struct mux_hwclock *hwc; const struct clockgen_pll_div *div; unsigned long plat_rate, min_rate; - u64 pct80_rate; + u64 max_rate, pct80_rate; u32 clksel; hwc = kzalloc(sizeof(*hwc), GFP_KERNEL); @@ -787,8 +790,8 @@ static struct clk * __init create_one_cmux(struct clockgen *cg, int idx) return NULL; } - pct80_rate = clk_get_rate(div->clk); - pct80_rate *= 8; + max_rate = clk_get_rate(div->clk); + pct80_rate = max_rate * 8; do_div(pct80_rate, 10); plat_rate = clk_get_rate(cg->pll[PLATFORM_PLL].div[PLL_DIV1].clk); @@ -798,7 +801,7 @@ static struct clk * __init create_one_cmux(struct clockgen *cg, int idx) else min_rate = plat_rate / 2; - return create_mux_common(cg, hwc, &cmux_ops, min_rate, + return create_mux_common(cg, hwc, &cmux_ops, min_rate, max_rate, pct80_rate, "cg-cmux%d", idx); } @@ -813,7 +816,7 @@ static struct clk * __init create_one_hwaccel(struct clockgen *cg, int idx) hwc->reg = cg->regs + 0x20 * idx + 0x10; hwc->info = cg->info.hwaccel[idx]; - return create_mux_common(cg, hwc, &hwaccel_ops, 0, 0, + return create_mux_common(cg, hwc, &hwaccel_ops, 0, ULONG_MAX, 0, "cg-hwaccel%d", idx); } From a29e52a6e66f4c0c895e7083e4bad2e7957f1fb5 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sat, 17 Sep 2016 15:54:13 +0000 Subject: [PATCH 276/792] clk: mmp: mmp2: fix return value check in mmp2_clk_init() Fix the retrn value check which testing the wrong variable in mmp2_clk_init(). Fixes: 1ec770d92a62 ("clk: mmp: add mmp2 DT support for clock driver") Signed-off-by: Wei Yongjun Signed-off-by: Stephen Boyd --- drivers/clk/mmp/clk-of-mmp2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/mmp/clk-of-mmp2.c b/drivers/clk/mmp/clk-of-mmp2.c index 3a51fff1b0e7..9adaf48aea23 100644 --- a/drivers/clk/mmp/clk-of-mmp2.c +++ b/drivers/clk/mmp/clk-of-mmp2.c @@ -313,7 +313,7 @@ static void __init mmp2_clk_init(struct device_node *np) } pxa_unit->apmu_base = of_iomap(np, 1); - if (!pxa_unit->mpmu_base) { + if (!pxa_unit->apmu_base) { pr_err("failed to map apmu registers\n"); return; } From deab07261d54b4db7b627d38e0efac97f176c6d6 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sat, 17 Sep 2016 15:54:28 +0000 Subject: [PATCH 277/792] clk: mmp: pxa168: fix return value check in pxa168_clk_init() Fix the retrn value check which testing the wrong variable in pxa168_clk_init(). Fixes: ab08aefcd12d ("clk: mmp: add pxa168 DT support for clock driver") Signed-off-by: Wei Yongjun Signed-off-by: Stephen Boyd --- drivers/clk/mmp/clk-of-pxa168.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/mmp/clk-of-pxa168.c b/drivers/clk/mmp/clk-of-pxa168.c index 87f2317b2a00..f110c02e83cb 100644 --- a/drivers/clk/mmp/clk-of-pxa168.c +++ b/drivers/clk/mmp/clk-of-pxa168.c @@ -262,7 +262,7 @@ static void __init pxa168_clk_init(struct device_node *np) } pxa_unit->apmu_base = of_iomap(np, 1); - if (!pxa_unit->mpmu_base) { + if (!pxa_unit->apmu_base) { pr_err("failed to map apmu registers\n"); return; } From 10f2bfb092e3b49000526c02cfe8b2abbbdbb752 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sat, 17 Sep 2016 15:55:56 +0000 Subject: [PATCH 278/792] clk: mmp: pxa910: fix return value check in pxa910_clk_init() Fix the retrn value check which testing the wrong variable in pxa910_clk_init(). Fixes: 2bc61da9f7ff ("clk: mmp: add pxa910 DT support for clock driver") Signed-off-by: Wei Yongjun Signed-off-by: Stephen Boyd --- drivers/clk/mmp/clk-of-pxa910.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/clk/mmp/clk-of-pxa910.c b/drivers/clk/mmp/clk-of-pxa910.c index e22a67f76d93..64d1ef49caeb 100644 --- a/drivers/clk/mmp/clk-of-pxa910.c +++ b/drivers/clk/mmp/clk-of-pxa910.c @@ -282,7 +282,7 @@ static void __init pxa910_clk_init(struct device_node *np) } pxa_unit->apmu_base = of_iomap(np, 1); - if (!pxa_unit->mpmu_base) { + if (!pxa_unit->apmu_base) { pr_err("failed to map apmu registers\n"); return; } @@ -294,7 +294,7 @@ static void __init pxa910_clk_init(struct device_node *np) } pxa_unit->apbcp_base = of_iomap(np, 3); - if (!pxa_unit->mpmu_base) { + if (!pxa_unit->apbcp_base) { pr_err("failed to map apbcp registers\n"); return; } From ceb75787bc75d0a7b88519ab8a68067ac690f55a Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 1 Nov 2016 11:49:56 +0100 Subject: [PATCH 279/792] PM / sleep: fix device reference leak in test_suspend Make sure to drop the reference taken by class_find_device() after opening the RTC device. Fixes: 77437fd4e61f (pm: boot time suspend selftest) Signed-off-by: Johan Hovold Signed-off-by: Rafael J. Wysocki --- kernel/power/suspend_test.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/kernel/power/suspend_test.c b/kernel/power/suspend_test.c index 084452e34a12..bdff5ed57f10 100644 --- a/kernel/power/suspend_test.c +++ b/kernel/power/suspend_test.c @@ -203,8 +203,10 @@ static int __init test_suspend(void) /* RTCs have initialized by now too ... can we use one? */ dev = class_find_device(rtc_class, NULL, NULL, has_wakealarm); - if (dev) + if (dev) { rtc = rtc_class_open(dev_name(dev)); + put_device(dev); + } if (!rtc) { printk(warn_no_rtc); return 0; From 8d23ea403044efe97553dd64228b172c8ffca047 Mon Sep 17 00:00:00 2001 From: Archit Taneja Date: Tue, 25 Oct 2016 12:17:59 +0530 Subject: [PATCH 280/792] drm/msm/dsi: Queue HPD helper work in attach/detach callbacks The msm/dsi host drivers calls drm_helper_hpd_irq_event in the mipi_dsi_host attach/detatch callbacks. mipi_dsi_attach()/mipi_dsi_detach() from a panel/bridge driver could be called from a context where the drm_device's mode_config.mutex is already held, resulting in a deadlock. Queue it as work instead. Signed-off-by: Archit Taneja Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/dsi/dsi_host.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c index f05ed0e1f3d6..6f240021705b 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_host.c +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c @@ -139,6 +139,7 @@ struct msm_dsi_host { u32 err_work_state; struct work_struct err_work; + struct work_struct hpd_work; struct workqueue_struct *workqueue; /* DSI 6G TX buffer*/ @@ -1294,6 +1295,14 @@ static void dsi_sw_reset_restore(struct msm_dsi_host *msm_host) wmb(); /* make sure dsi controller enabled again */ } +static void dsi_hpd_worker(struct work_struct *work) +{ + struct msm_dsi_host *msm_host = + container_of(work, struct msm_dsi_host, hpd_work); + + drm_helper_hpd_irq_event(msm_host->dev); +} + static void dsi_err_worker(struct work_struct *work) { struct msm_dsi_host *msm_host = @@ -1480,7 +1489,7 @@ static int dsi_host_attach(struct mipi_dsi_host *host, DBG("id=%d", msm_host->id); if (msm_host->dev) - drm_helper_hpd_irq_event(msm_host->dev); + queue_work(msm_host->workqueue, &msm_host->hpd_work); return 0; } @@ -1494,7 +1503,7 @@ static int dsi_host_detach(struct mipi_dsi_host *host, DBG("id=%d", msm_host->id); if (msm_host->dev) - drm_helper_hpd_irq_event(msm_host->dev); + queue_work(msm_host->workqueue, &msm_host->hpd_work); return 0; } @@ -1748,6 +1757,7 @@ int msm_dsi_host_init(struct msm_dsi *msm_dsi) /* setup workqueue */ msm_host->workqueue = alloc_ordered_workqueue("dsi_drm_work", 0); INIT_WORK(&msm_host->err_work, dsi_err_worker); + INIT_WORK(&msm_host->hpd_work, dsi_hpd_worker); msm_dsi->host = &msm_host->base; msm_dsi->id = msm_host->id; From 73b65b197024f3f9ef16a28cc9533c011e0a3f6d Mon Sep 17 00:00:00 2001 From: Archit Taneja Date: Thu, 27 Oct 2016 11:57:15 +0530 Subject: [PATCH 281/792] drm/msm: Set CLK_IGNORE_UNUSED flag for PLL clocks The DSI/HDMI PLLs in MSM require resources like interface clocks, power domains to be enabled before we can access their registers. The clock framework doesn't have a mechanism at the moment where we can tie such resources to a clock, so we make sure that the KMS driver enables these resources whenever a PLL is expected to be in use. One place where we can't ensure the resource dependencies are met is when the clock framework tries to disable unused clocks. The KMS driver doesn't know when the clock framework calls the is_enabled clk_op, and hence can't enable interface clocks/power domains beforehand. We set the CLK_IGNORE_UNUSED flag for PLL clocks for now. This needs to be revisited, since bootloaders can enable display, and we would want to disable the PLL clocks if there isn't a display driver using them. Cc: Stephen Boyd Signed-off-by: Archit Taneja Acked-by: Stephen Boyd Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c | 1 + drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c | 1 + drivers/gpu/drm/msm/hdmi/hdmi_phy_8996.c | 1 + drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c | 1 + 4 files changed, 4 insertions(+) diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c index 598fdaff0a41..26e3a01a99c2 100644 --- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c +++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm.c @@ -521,6 +521,7 @@ static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm) .parent_names = (const char *[]){ "xo" }, .num_parents = 1, .name = vco_name, + .flags = CLK_IGNORE_UNUSED, .ops = &clk_ops_dsi_pll_28nm_vco, }; struct device *dev = &pll_28nm->pdev->dev; diff --git a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c index 38c90e1eb002..49008451085b 100644 --- a/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c +++ b/drivers/gpu/drm/msm/dsi/pll/dsi_pll_28nm_8960.c @@ -412,6 +412,7 @@ static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm) struct clk_init_data vco_init = { .parent_names = (const char *[]){ "pxo" }, .num_parents = 1, + .flags = CLK_IGNORE_UNUSED, .ops = &clk_ops_dsi_pll_28nm_vco, }; struct device *dev = &pll_28nm->pdev->dev; diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_phy_8996.c b/drivers/gpu/drm/msm/hdmi/hdmi_phy_8996.c index aa94a553794f..143eab46ba68 100644 --- a/drivers/gpu/drm/msm/hdmi/hdmi_phy_8996.c +++ b/drivers/gpu/drm/msm/hdmi/hdmi_phy_8996.c @@ -702,6 +702,7 @@ static struct clk_init_data pll_init = { .ops = &hdmi_8996_pll_ops, .parent_names = hdmi_pll_parents, .num_parents = ARRAY_SIZE(hdmi_pll_parents), + .flags = CLK_IGNORE_UNUSED, }; int msm_hdmi_pll_8996_init(struct platform_device *pdev) diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c b/drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c index 92da69aa6187..99590758c68b 100644 --- a/drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c +++ b/drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c @@ -424,6 +424,7 @@ static struct clk_init_data pll_init = { .ops = &hdmi_pll_ops, .parent_names = hdmi_pll_parents, .num_parents = ARRAY_SIZE(hdmi_pll_parents), + .flags = CLK_IGNORE_UNUSED, }; int msm_hdmi_pll_8960_init(struct platform_device *pdev) From 31e4801aa2e59d4b42dc0fd42846a3aa7a6361af Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Thu, 13 Oct 2016 12:43:17 -0400 Subject: [PATCH 282/792] drm/msm/mdp5: handle non-fullscreen base plane case If the bottom-most layer is not fullscreen, we need to use the BASE mixer stage for solid fill (ie. MDP5_CTL_BLEND_OP_FLAG_BORDER_OUT). The blend_setup() code pretty much handled this already, we just had to figure this out in _atomic_check() and assign the stages appropriately. Also fix the case where there are zero enabled planes, where we also need to enable BORDER_OUT. Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c | 46 ++++++++++++++---------- 1 file changed, 28 insertions(+), 18 deletions(-) diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c index fa2be7ce9468..c205c360e16d 100644 --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c @@ -223,12 +223,7 @@ static void blend_setup(struct drm_crtc *crtc) plane_cnt++; } - /* - * If there is no base layer, enable border color. - * Although it's not possbile in current blend logic, - * put it here as a reminder. - */ - if (!pstates[STAGE_BASE] && plane_cnt) { + if (!pstates[STAGE_BASE]) { ctl_blend_flags |= MDP5_CTL_BLEND_OP_FLAG_BORDER_OUT; DBG("Border Color is enabled"); } @@ -365,6 +360,15 @@ static int pstate_cmp(const void *a, const void *b) return pa->state->zpos - pb->state->zpos; } +/* is there a helper for this? */ +static bool is_fullscreen(struct drm_crtc_state *cstate, + struct drm_plane_state *pstate) +{ + return (pstate->crtc_x <= 0) && (pstate->crtc_y <= 0) && + ((pstate->crtc_x + pstate->crtc_w) >= cstate->mode.hdisplay) && + ((pstate->crtc_y + pstate->crtc_h) >= cstate->mode.vdisplay); +} + static int mdp5_crtc_atomic_check(struct drm_crtc *crtc, struct drm_crtc_state *state) { @@ -375,21 +379,11 @@ static int mdp5_crtc_atomic_check(struct drm_crtc *crtc, struct plane_state pstates[STAGE_MAX + 1]; const struct mdp5_cfg_hw *hw_cfg; const struct drm_plane_state *pstate; - int cnt = 0, i; + int cnt = 0, base = 0, i; DBG("%s: check", mdp5_crtc->name); - /* verify that there are not too many planes attached to crtc - * and that we don't have conflicting mixer stages: - */ - hw_cfg = mdp5_cfg_get_hw_config(mdp5_kms->cfg); drm_atomic_crtc_state_for_each_plane_state(plane, pstate, state) { - if (cnt >= (hw_cfg->lm.nb_stages)) { - dev_err(dev->dev, "too many planes!\n"); - return -EINVAL; - } - - pstates[cnt].plane = plane; pstates[cnt].state = to_mdp5_plane_state(pstate); @@ -399,8 +393,24 @@ static int mdp5_crtc_atomic_check(struct drm_crtc *crtc, /* assign a stage based on sorted zpos property */ sort(pstates, cnt, sizeof(pstates[0]), pstate_cmp, NULL); + /* if the bottom-most layer is not fullscreen, we need to use + * it for solid-color: + */ + if ((cnt > 0) && !is_fullscreen(state, &pstates[0].state->base)) + base++; + + /* verify that there are not too many planes attached to crtc + * and that we don't have conflicting mixer stages: + */ + hw_cfg = mdp5_cfg_get_hw_config(mdp5_kms->cfg); + + if ((cnt + base) >= hw_cfg->lm.nb_stages) { + dev_err(dev->dev, "too many planes!\n"); + return -EINVAL; + } + for (i = 0; i < cnt; i++) { - pstates[i].state->stage = STAGE_BASE + i; + pstates[i].state->stage = STAGE_BASE + i + base; DBG("%s: assign pipe %s on stage=%d", mdp5_crtc->name, pipe2name(mdp5_plane_pipe(pstates[i].plane)), pstates[i].state->stage); From 07cd2e36263af34f7f0b48e36eff5d4b77d5756a Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 17 Oct 2016 12:00:21 -0400 Subject: [PATCH 283/792] drm/msm/mdp5: no scaling support on RGBn pipes for 8x16 Looks like cut/paste error from the other device cfgs (which do support scaling on RGBn pipes). Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c | 2 +- drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c | 9 +++------ 2 files changed, 4 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c index ac9e4cde1380..0e2bc5636c81 100644 --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c @@ -272,7 +272,7 @@ const struct mdp5_cfg_hw msm8x16_config = { .count = 2, .base = { 0x14000, 0x16000 }, .caps = MDP_PIPE_CAP_HFLIP | MDP_PIPE_CAP_VFLIP | - MDP_PIPE_CAP_SCALE | MDP_PIPE_CAP_DECIMATION, + MDP_PIPE_CAP_DECIMATION, }, .pipe_dma = { .count = 1, diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c index 951c002b05df..83bf997dda03 100644 --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_plane.c @@ -292,8 +292,7 @@ static int mdp5_plane_atomic_check(struct drm_plane *plane, format = to_mdp_format(msm_framebuffer_format(state->fb)); if (MDP_FORMAT_IS_YUV(format) && !pipe_supports_yuv(mdp5_plane->caps)) { - dev_err(plane->dev->dev, - "Pipe doesn't support YUV\n"); + DBG("Pipe doesn't support YUV\n"); return -EINVAL; } @@ -301,8 +300,7 @@ static int mdp5_plane_atomic_check(struct drm_plane *plane, if (!(mdp5_plane->caps & MDP_PIPE_CAP_SCALE) && (((state->src_w >> 16) != state->crtc_w) || ((state->src_h >> 16) != state->crtc_h))) { - dev_err(plane->dev->dev, - "Pipe doesn't support scaling (%dx%d -> %dx%d)\n", + DBG("Pipe doesn't support scaling (%dx%d -> %dx%d)\n", state->src_w >> 16, state->src_h >> 16, state->crtc_w, state->crtc_h); @@ -313,8 +311,7 @@ static int mdp5_plane_atomic_check(struct drm_plane *plane, vflip = !!(state->rotation & DRM_REFLECT_Y); if ((vflip && !(mdp5_plane->caps & MDP_PIPE_CAP_VFLIP)) || (hflip && !(mdp5_plane->caps & MDP_PIPE_CAP_HFLIP))) { - dev_err(plane->dev->dev, - "Pipe doesn't support flip\n"); + DBG("Pipe doesn't support flip\n"); return -EINVAL; } From 67cba0fbb484bbc1af42f2804662a80008ba61e9 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 24 Oct 2016 11:46:44 -0400 Subject: [PATCH 284/792] drm/msm/mdp5: 8x16 actually has 8 mixer stages Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c index 0e2bc5636c81..8b4e3004f451 100644 --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c @@ -282,7 +282,7 @@ const struct mdp5_cfg_hw msm8x16_config = { .lm = { .count = 2, /* LM0 and LM3 */ .base = { 0x44000, 0x47000 }, - .nb_stages = 5, + .nb_stages = 8, .max_width = 2048, .max_height = 0xFFFF, }, From a4513320423a388ed55eb0754353f46b10d05a99 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Wed, 2 Nov 2016 12:03:03 +0100 Subject: [PATCH 285/792] ASoC: samsung: spdif: Fix DMA filter initialization MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch fixes issues introduced in commit 73f5dfc68316bef2ab7062ec "ASoC: samsung: get access to DMA engine early to defer probe properly" and indicated by a following compilation warning: CC [M] sound/soc/samsung/spdif.o sound/soc/samsung/spdif.c: In function ‘spdif_probe’: sound/soc/samsung/spdif.c:419:6: warning: ‘filter’ may be used uninitialized in this function [-Wuninitialized] Signed-off-by: Sylwester Nawrocki Signed-off-by: Mark Brown --- sound/soc/samsung/spdif.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-) diff --git a/sound/soc/samsung/spdif.c b/sound/soc/samsung/spdif.c index 704b7b12bf8b..779504f54bc0 100644 --- a/sound/soc/samsung/spdif.c +++ b/sound/soc/samsung/spdif.c @@ -416,6 +416,15 @@ static int spdif_probe(struct platform_device *pdev) goto err3; } + spdif_stereo_out.addr_width = 2; + spdif_stereo_out.addr = mem_res->start + DATA_OUTBUF; + filter = NULL; + if (spdif_pdata) { + spdif_stereo_out.filter_data = spdif_pdata->dma_playback; + filter = spdif_pdata->dma_filter; + } + spdif->dma_playback = &spdif_stereo_out; + ret = samsung_asoc_dma_platform_register(&pdev->dev, filter, NULL, NULL); if (ret) { @@ -432,16 +441,6 @@ static int spdif_probe(struct platform_device *pdev) goto err4; } - spdif_stereo_out.addr_width = 2; - spdif_stereo_out.addr = mem_res->start + DATA_OUTBUF; - filter = NULL; - if (spdif_pdata) { - spdif_stereo_out.filter_data = spdif_pdata->dma_playback; - filter = spdif_pdata->dma_filter; - } - - spdif->dma_playback = &spdif_stereo_out; - return 0; err4: iounmap(spdif->regs); From 6c08d7ab23dd07c046e8de1520073053bdc76ae2 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Sun, 30 Oct 2016 09:49:26 +0100 Subject: [PATCH 286/792] drm/sun4i: Fix error handling 'sun4i_layers_init()' returns an error pointer in case of error, not NULL. So test it with IS_ERR. Signed-off-by: Christophe JAILLET Signed-off-by: Maxime Ripard --- drivers/gpu/drm/sun4i/sun4i_drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/sun4i/sun4i_drv.c b/drivers/gpu/drm/sun4i/sun4i_drv.c index 0da9862ad8ed..077f3785439e 100644 --- a/drivers/gpu/drm/sun4i/sun4i_drv.c +++ b/drivers/gpu/drm/sun4i/sun4i_drv.c @@ -142,7 +142,7 @@ static int sun4i_drv_bind(struct device *dev) /* Create our layers */ drv->layers = sun4i_layers_init(drm); - if (!drv->layers) { + if (IS_ERR(drv->layers)) { dev_err(drm->dev, "Couldn't create the planes\n"); ret = -EINVAL; goto free_drm; From ea26e4ec08d4727e3a9e48a6b74695861effcbd9 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Tue, 1 Nov 2016 00:39:48 +0100 Subject: [PATCH 287/792] KVM: x86: drop TSC offsetting kvm_x86_ops to fix KVM_GET/SET_CLOCK MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Since commit a545ab6a0085 ("kvm: x86: add tsc_offset field to struct kvm_vcpu_arch", 2016-09-07) the offset between host and L1 TSC is cached and need not be fished out of the VMCS or VMCB. This means that we can implement adjust_tsc_offset_guest and read_l1_tsc entirely in generic code. The simplification is particularly significant for VMX code, where vmx->nested.vmcs01_tsc_offset was duplicating what is now in vcpu->arch.tsc_offset. Therefore the vmcs01_tsc_offset can be dropped completely. More importantly, this fixes KVM_GET_CLOCK/KVM_SET_CLOCK which, after commit 108b249c453d ("KVM: x86: introduce get_kvmclock_ns", 2016-09-01) called read_l1_tsc while the VMCS was not loaded. It thus returned bogus values on Intel CPUs. Fixes: 108b249c453dd7132599ab6dc7e435a7036c193f Reported-by: Roman Kagan Reviewed-by: Radim Krčmář Signed-off-by: Paolo Bonzini --- arch/x86/include/asm/kvm_host.h | 3 --- arch/x86/kvm/svm.c | 23 ------------------- arch/x86/kvm/vmx.c | 39 +++------------------------------ arch/x86/kvm/x86.c | 6 ++--- 4 files changed, 6 insertions(+), 65 deletions(-) diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h index 4b20f7304b9c..bdde80731f49 100644 --- a/arch/x86/include/asm/kvm_host.h +++ b/arch/x86/include/asm/kvm_host.h @@ -948,7 +948,6 @@ struct kvm_x86_ops { int (*get_lpage_level)(void); bool (*rdtscp_supported)(void); bool (*invpcid_supported)(void); - void (*adjust_tsc_offset_guest)(struct kvm_vcpu *vcpu, s64 adjustment); void (*set_tdp_cr3)(struct kvm_vcpu *vcpu, unsigned long cr3); @@ -958,8 +957,6 @@ struct kvm_x86_ops { void (*write_tsc_offset)(struct kvm_vcpu *vcpu, u64 offset); - u64 (*read_l1_tsc)(struct kvm_vcpu *vcpu, u64 host_tsc); - void (*get_exit_info)(struct kvm_vcpu *vcpu, u64 *info1, u64 *info2); int (*check_intercept)(struct kvm_vcpu *vcpu, diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index f8157a36ab09..8ca1eca5038d 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -1138,21 +1138,6 @@ static void svm_write_tsc_offset(struct kvm_vcpu *vcpu, u64 offset) mark_dirty(svm->vmcb, VMCB_INTERCEPTS); } -static void svm_adjust_tsc_offset_guest(struct kvm_vcpu *vcpu, s64 adjustment) -{ - struct vcpu_svm *svm = to_svm(vcpu); - - svm->vmcb->control.tsc_offset += adjustment; - if (is_guest_mode(vcpu)) - svm->nested.hsave->control.tsc_offset += adjustment; - else - trace_kvm_write_tsc_offset(vcpu->vcpu_id, - svm->vmcb->control.tsc_offset - adjustment, - svm->vmcb->control.tsc_offset); - - mark_dirty(svm->vmcb, VMCB_INTERCEPTS); -} - static void avic_init_vmcb(struct vcpu_svm *svm) { struct vmcb *vmcb = svm->vmcb; @@ -3449,12 +3434,6 @@ static int cr8_write_interception(struct vcpu_svm *svm) return 0; } -static u64 svm_read_l1_tsc(struct kvm_vcpu *vcpu, u64 host_tsc) -{ - struct vmcb *vmcb = get_host_vmcb(to_svm(vcpu)); - return vmcb->control.tsc_offset + host_tsc; -} - static int svm_get_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info) { struct vcpu_svm *svm = to_svm(vcpu); @@ -5422,8 +5401,6 @@ static struct kvm_x86_ops svm_x86_ops __ro_after_init = { .has_wbinvd_exit = svm_has_wbinvd_exit, .write_tsc_offset = svm_write_tsc_offset, - .adjust_tsc_offset_guest = svm_adjust_tsc_offset_guest, - .read_l1_tsc = svm_read_l1_tsc, .set_tdp_cr3 = set_tdp_cr3, diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 74a4df993a51..754c3a7f444a 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -421,7 +421,6 @@ struct nested_vmx { /* vmcs02_list cache of VMCSs recently used to run L2 guests */ struct list_head vmcs02_pool; int vmcs02_num; - u64 vmcs01_tsc_offset; bool change_vmcs01_virtual_x2apic_mode; /* L2 must run next, and mustn't decide to exit to L1. */ bool nested_run_pending; @@ -2604,20 +2603,6 @@ static u64 guest_read_tsc(struct kvm_vcpu *vcpu) return kvm_scale_tsc(vcpu, host_tsc) + tsc_offset; } -/* - * Like guest_read_tsc, but always returns L1's notion of the timestamp - * counter, even if a nested guest (L2) is currently running. - */ -static u64 vmx_read_l1_tsc(struct kvm_vcpu *vcpu, u64 host_tsc) -{ - u64 tsc_offset; - - tsc_offset = is_guest_mode(vcpu) ? - to_vmx(vcpu)->nested.vmcs01_tsc_offset : - vmcs_read64(TSC_OFFSET); - return host_tsc + tsc_offset; -} - /* * writes 'offset' into guest's timestamp counter offset register */ @@ -2631,7 +2616,6 @@ static void vmx_write_tsc_offset(struct kvm_vcpu *vcpu, u64 offset) * to the newly set TSC to get L2's TSC. */ struct vmcs12 *vmcs12; - to_vmx(vcpu)->nested.vmcs01_tsc_offset = offset; /* recalculate vmcs02.TSC_OFFSET: */ vmcs12 = get_vmcs12(vcpu); vmcs_write64(TSC_OFFSET, offset + @@ -2644,19 +2628,6 @@ static void vmx_write_tsc_offset(struct kvm_vcpu *vcpu, u64 offset) } } -static void vmx_adjust_tsc_offset_guest(struct kvm_vcpu *vcpu, s64 adjustment) -{ - u64 offset = vmcs_read64(TSC_OFFSET); - - vmcs_write64(TSC_OFFSET, offset + adjustment); - if (is_guest_mode(vcpu)) { - /* Even when running L2, the adjustment needs to apply to L1 */ - to_vmx(vcpu)->nested.vmcs01_tsc_offset += adjustment; - } else - trace_kvm_write_tsc_offset(vcpu->vcpu_id, offset, - offset + adjustment); -} - static bool guest_cpuid_has_vmx(struct kvm_vcpu *vcpu) { struct kvm_cpuid_entry2 *best = kvm_find_cpuid_entry(vcpu, 1, 0); @@ -10061,9 +10032,9 @@ static void prepare_vmcs02(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12) if (vmcs12->cpu_based_vm_exec_control & CPU_BASED_USE_TSC_OFFSETING) vmcs_write64(TSC_OFFSET, - vmx->nested.vmcs01_tsc_offset + vmcs12->tsc_offset); + vcpu->arch.tsc_offset + vmcs12->tsc_offset); else - vmcs_write64(TSC_OFFSET, vmx->nested.vmcs01_tsc_offset); + vmcs_write64(TSC_OFFSET, vcpu->arch.tsc_offset); if (kvm_has_tsc_control) decache_tsc_multiplier(vmx); @@ -10293,8 +10264,6 @@ static int nested_vmx_run(struct kvm_vcpu *vcpu, bool launch) enter_guest_mode(vcpu); - vmx->nested.vmcs01_tsc_offset = vmcs_read64(TSC_OFFSET); - if (!(vmcs12->vm_entry_controls & VM_ENTRY_LOAD_DEBUG_CONTROLS)) vmx->nested.vmcs01_debugctl = vmcs_read64(GUEST_IA32_DEBUGCTL); @@ -10818,7 +10787,7 @@ static void nested_vmx_vmexit(struct kvm_vcpu *vcpu, u32 exit_reason, load_vmcs12_host_state(vcpu, vmcs12); /* Update any VMCS fields that might have changed while L2 ran */ - vmcs_write64(TSC_OFFSET, vmx->nested.vmcs01_tsc_offset); + vmcs_write64(TSC_OFFSET, vcpu->arch.tsc_offset); if (vmx->hv_deadline_tsc == -1) vmcs_clear_bits(PIN_BASED_VM_EXEC_CONTROL, PIN_BASED_VMX_PREEMPTION_TIMER); @@ -11339,8 +11308,6 @@ static struct kvm_x86_ops vmx_x86_ops __ro_after_init = { .has_wbinvd_exit = cpu_has_vmx_wbinvd_exit, .write_tsc_offset = vmx_write_tsc_offset, - .adjust_tsc_offset_guest = vmx_adjust_tsc_offset_guest, - .read_l1_tsc = vmx_read_l1_tsc, .set_tdp_cr3 = vmx_set_cr3, diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index e954be8a3185..3017de0431bd 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -1409,7 +1409,7 @@ static u64 kvm_compute_tsc_offset(struct kvm_vcpu *vcpu, u64 target_tsc) u64 kvm_read_l1_tsc(struct kvm_vcpu *vcpu, u64 host_tsc) { - return kvm_x86_ops->read_l1_tsc(vcpu, kvm_scale_tsc(vcpu, host_tsc)); + return vcpu->arch.tsc_offset + kvm_scale_tsc(vcpu, host_tsc); } EXPORT_SYMBOL_GPL(kvm_read_l1_tsc); @@ -1547,7 +1547,7 @@ EXPORT_SYMBOL_GPL(kvm_write_tsc); static inline void adjust_tsc_offset_guest(struct kvm_vcpu *vcpu, s64 adjustment) { - kvm_x86_ops->adjust_tsc_offset_guest(vcpu, adjustment); + kvm_vcpu_write_tsc_offset(vcpu, vcpu->arch.tsc_offset + adjustment); } static inline void adjust_tsc_offset_host(struct kvm_vcpu *vcpu, s64 adjustment) @@ -1555,7 +1555,7 @@ static inline void adjust_tsc_offset_host(struct kvm_vcpu *vcpu, s64 adjustment) if (vcpu->arch.tsc_scaling_ratio != kvm_default_tsc_scaling_ratio) WARN_ON(adjustment < 0); adjustment = kvm_scale_tsc(vcpu, (u64) adjustment); - kvm_x86_ops->adjust_tsc_offset_guest(vcpu, adjustment); + adjust_tsc_offset_guest(vcpu, adjustment); } #ifdef CONFIG_X86_64 From 355f4fb1405ec29d0fac49b4d41fcd78cbd455d5 Mon Sep 17 00:00:00 2001 From: Jim Mattson Date: Fri, 28 Oct 2016 08:29:39 -0700 Subject: [PATCH 288/792] kvm: nVMX: VMCLEAR an active shadow VMCS after last use After a successful VM-entry with the "VMCS shadowing" VM-execution control set, the shadow VMCS referenced by the VMCS link pointer field in the current VMCS becomes active on the logical processor. A VMCS that is made active on more than one logical processor may become corrupted. Therefore, before an active VMCS can be migrated to another logical processor, the first logical processor must execute a VMCLEAR for the active VMCS. VMCLEAR both ensures that all VMCS data are written to memory and makes the VMCS inactive. Signed-off-by: Jim Mattson Reviewed-By: David Matlack Message-Id: <1477668579-22555-1-git-send-email-jmattson@google.com> Signed-off-by: Paolo Bonzini --- arch/x86/kvm/vmx.c | 22 +++++++++++++++------- 1 file changed, 15 insertions(+), 7 deletions(-) diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 754c3a7f444a..5382b82462fc 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -187,6 +187,7 @@ struct vmcs { */ struct loaded_vmcs { struct vmcs *vmcs; + struct vmcs *shadow_vmcs; int cpu; int launched; struct list_head loaded_vmcss_on_cpu_link; @@ -411,7 +412,6 @@ struct nested_vmx { * memory during VMXOFF, VMCLEAR, VMPTRLD. */ struct vmcs12 *cached_vmcs12; - struct vmcs *current_shadow_vmcs; /* * Indicates if the shadow vmcs must be updated with the * data hold by vmcs12 @@ -1418,6 +1418,8 @@ static void vmcs_clear(struct vmcs *vmcs) static inline void loaded_vmcs_init(struct loaded_vmcs *loaded_vmcs) { vmcs_clear(loaded_vmcs->vmcs); + if (loaded_vmcs->shadow_vmcs && loaded_vmcs->launched) + vmcs_clear(loaded_vmcs->shadow_vmcs); loaded_vmcs->cpu = -1; loaded_vmcs->launched = 0; } @@ -3533,6 +3535,7 @@ static void free_loaded_vmcs(struct loaded_vmcs *loaded_vmcs) loaded_vmcs_clear(loaded_vmcs); free_vmcs(loaded_vmcs->vmcs); loaded_vmcs->vmcs = NULL; + WARN_ON(loaded_vmcs->shadow_vmcs != NULL); } static void free_kvm_area(void) @@ -6667,6 +6670,7 @@ static struct loaded_vmcs *nested_get_current_vmcs02(struct vcpu_vmx *vmx) if (!item) return NULL; item->vmcs02.vmcs = alloc_vmcs(); + item->vmcs02.shadow_vmcs = NULL; if (!item->vmcs02.vmcs) { kfree(item); return NULL; @@ -7043,7 +7047,7 @@ static int handle_vmon(struct kvm_vcpu *vcpu) shadow_vmcs->revision_id |= (1u << 31); /* init shadow vmcs */ vmcs_clear(shadow_vmcs); - vmx->nested.current_shadow_vmcs = shadow_vmcs; + vmx->vmcs01.shadow_vmcs = shadow_vmcs; } INIT_LIST_HEAD(&(vmx->nested.vmcs02_pool)); @@ -7145,8 +7149,11 @@ static void free_nested(struct vcpu_vmx *vmx) free_page((unsigned long)vmx->nested.msr_bitmap); vmx->nested.msr_bitmap = NULL; } - if (enable_shadow_vmcs) - free_vmcs(vmx->nested.current_shadow_vmcs); + if (enable_shadow_vmcs) { + vmcs_clear(vmx->vmcs01.shadow_vmcs); + free_vmcs(vmx->vmcs01.shadow_vmcs); + vmx->vmcs01.shadow_vmcs = NULL; + } kfree(vmx->nested.cached_vmcs12); /* Unpin physical memory we referred to in current vmcs02 */ if (vmx->nested.apic_access_page) { @@ -7323,7 +7330,7 @@ static void copy_shadow_to_vmcs12(struct vcpu_vmx *vmx) int i; unsigned long field; u64 field_value; - struct vmcs *shadow_vmcs = vmx->nested.current_shadow_vmcs; + struct vmcs *shadow_vmcs = vmx->vmcs01.shadow_vmcs; const unsigned long *fields = shadow_read_write_fields; const int num_fields = max_shadow_read_write_fields; @@ -7372,7 +7379,7 @@ static void copy_vmcs12_to_shadow(struct vcpu_vmx *vmx) int i, q; unsigned long field; u64 field_value = 0; - struct vmcs *shadow_vmcs = vmx->nested.current_shadow_vmcs; + struct vmcs *shadow_vmcs = vmx->vmcs01.shadow_vmcs; vmcs_load(shadow_vmcs); @@ -7562,7 +7569,7 @@ static int handle_vmptrld(struct kvm_vcpu *vcpu) vmcs_set_bits(SECONDARY_VM_EXEC_CONTROL, SECONDARY_EXEC_SHADOW_VMCS); vmcs_write64(VMCS_LINK_POINTER, - __pa(vmx->nested.current_shadow_vmcs)); + __pa(vmx->vmcs01.shadow_vmcs)); vmx->nested.sync_shadow_vmcs = true; } } @@ -9127,6 +9134,7 @@ static struct kvm_vcpu *vmx_create_vcpu(struct kvm *kvm, unsigned int id) vmx->loaded_vmcs = &vmx->vmcs01; vmx->loaded_vmcs->vmcs = alloc_vmcs(); + vmx->loaded_vmcs->shadow_vmcs = NULL; if (!vmx->loaded_vmcs->vmcs) goto free_msrs; if (!vmm_exclusive) From 45788f1f5534fb02063ca077719592c2c3ba621e Mon Sep 17 00:00:00 2001 From: Saeed Mahameed Date: Tue, 1 Nov 2016 15:09:58 +0200 Subject: [PATCH 289/792] MAINTAINERS: Update MELLANOX MLX5 core VPI driver maintainers Add myself as a maintainer for mlx5 core driver as well. Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 4012c2f98617..53964ad4f2de 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8053,6 +8053,7 @@ F: drivers/infiniband/hw/mlx4/ F: include/linux/mlx4/ MELLANOX MLX5 core VPI driver +M: Saeed Mahameed M: Matan Barak M: Leon Romanovsky L: netdev@vger.kernel.org From 23f4ffedb7d751c7e298732ba91ca75d224bc1a6 Mon Sep 17 00:00:00 2001 From: Eli Cooper Date: Tue, 1 Nov 2016 23:45:12 +0800 Subject: [PATCH 290/792] ip6_tunnel: Clear IP6CB in ip6tunnel_xmit() skb->cb may contain data from previous layers. In the observed scenario, the garbage data were misinterpreted as IP6CB(skb)->frag_max_size, so that small packets sent through the tunnel are mistakenly fragmented. This patch unconditionally clears the control buffer in ip6tunnel_xmit(), which affects ip6_tunnel, ip6_udp_tunnel and ip6_gre. Currently none of these tunnels set IP6CB(skb)->flags, otherwise it needs to be done earlier. Cc: stable@vger.kernel.org Signed-off-by: Eli Cooper Signed-off-by: David S. Miller --- include/net/ip6_tunnel.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/net/ip6_tunnel.h b/include/net/ip6_tunnel.h index 20ed9699fcd4..1b1cf33cbfb0 100644 --- a/include/net/ip6_tunnel.h +++ b/include/net/ip6_tunnel.h @@ -146,6 +146,7 @@ static inline void ip6tunnel_xmit(struct sock *sk, struct sk_buff *skb, { int pkt_len, err; + memset(skb->cb, 0, sizeof(struct inet6_skb_parm)); pkt_len = skb->len - skb_inner_network_offset(skb); err = ip6_local_out(dev_net(skb_dst(skb)->dev), sk, skb); if (unlikely(net_xmit_eval(err))) From 4fd19c15decedd06d707e2691c24fce08700e2b1 Mon Sep 17 00:00:00 2001 From: Eli Cooper Date: Tue, 1 Nov 2016 23:45:13 +0800 Subject: [PATCH 291/792] ip6_udp_tunnel: remove unused IPCB related codes Some IPCB fields are currently set in udp_tunnel6_xmit_skb(), which are never used before it reaches ip6tunnel_xmit(), and past that point the control buffer is no longer interpreted as IPCB. This clears these unused IPCB related codes. Currently there is no skb scrubbing in ip6_udp_tunnel, otherwise IPCB(skb)->opt might need to be cleared for IPv4 packets, as shown in 5146d1f1511 ("tunnel: Clear IPCB(skb)->opt before dst_link_failure called"). Signed-off-by: Eli Cooper Signed-off-by: David S. Miller --- net/ipv6/ip6_udp_tunnel.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/net/ipv6/ip6_udp_tunnel.c b/net/ipv6/ip6_udp_tunnel.c index a7520528ecd2..b283f293ee4a 100644 --- a/net/ipv6/ip6_udp_tunnel.c +++ b/net/ipv6/ip6_udp_tunnel.c @@ -88,9 +88,6 @@ int udp_tunnel6_xmit_skb(struct dst_entry *dst, struct sock *sk, uh->len = htons(skb->len); - memset(&(IPCB(skb)->opt), 0, sizeof(IPCB(skb)->opt)); - IPCB(skb)->flags &= ~(IPSKB_XFRM_TUNNEL_SIZE | IPSKB_XFRM_TRANSFORMED - | IPSKB_REROUTED); skb_dst_set(skb, dst); udp6_set_csum(nocheck, skb, saddr, daddr, skb->len); From 269ebce4531b8edc4224259a02143181a1c1d77c Mon Sep 17 00:00:00 2001 From: Dongli Zhang Date: Wed, 2 Nov 2016 09:04:33 +0800 Subject: [PATCH 292/792] xen-netfront: cast grant table reference first to type int IS_ERR_VALUE() in commit 87557efc27f6a50140fb20df06a917f368ce3c66 ("xen-netfront: do not cast grant table reference to signed short") would not return true for error code unless we cast ref first to type int. Signed-off-by: Dongli Zhang Signed-off-by: David S. Miller --- drivers/net/xen-netfront.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index 189a28dcd80d..bf2744e1e3db 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -304,7 +304,7 @@ static void xennet_alloc_rx_buffers(struct netfront_queue *queue) queue->rx_skbs[id] = skb; ref = gnttab_claim_grant_reference(&queue->gref_rx_head); - WARN_ON_ONCE(IS_ERR_VALUE((unsigned long)ref)); + WARN_ON_ONCE(IS_ERR_VALUE((unsigned long)(int)ref)); queue->grant_rx_ref[id] = ref; page = skb_frag_page(&skb_shinfo(skb)->frags[0]); @@ -428,7 +428,7 @@ static void xennet_tx_setup_grant(unsigned long gfn, unsigned int offset, id = get_id_from_freelist(&queue->tx_skb_freelist, queue->tx_skbs); tx = RING_GET_REQUEST(&queue->tx, queue->tx.req_prod_pvt++); ref = gnttab_claim_grant_reference(&queue->gref_tx_head); - WARN_ON_ONCE(IS_ERR_VALUE((unsigned long)ref)); + WARN_ON_ONCE(IS_ERR_VALUE((unsigned long)(int)ref)); gnttab_grant_foreign_access_ref(ref, queue->info->xbdev->otherend_id, gfn, GNTMAP_readonly); From d9092f52d7e61dd1557f2db2400ddb430e85937e Mon Sep 17 00:00:00 2001 From: Owen Hofmann Date: Thu, 27 Oct 2016 11:25:52 -0700 Subject: [PATCH 293/792] kvm: x86: Check memopp before dereference (CVE-2016-8630) Commit 41061cdb98 ("KVM: emulate: do not initialize memopp") removes a check for non-NULL under incorrect assumptions. An undefined instruction with a ModR/M byte with Mod=0 and R/M-5 (e.g. 0xc7 0x15) will attempt to dereference a null pointer here. Fixes: 41061cdb98a0bec464278b4db8e894a3121671f5 Message-Id: <1477592752-126650-2-git-send-email-osh@google.com> Signed-off-by: Owen Hofmann Signed-off-by: Paolo Bonzini --- arch/x86/kvm/emulate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c index 4e95d3eb2955..cbd7b92585bb 100644 --- a/arch/x86/kvm/emulate.c +++ b/arch/x86/kvm/emulate.c @@ -5045,7 +5045,7 @@ done_prefixes: /* Decode and fetch the destination operand: register or memory. */ rc = decode_operand(ctxt, &ctxt->dst, (ctxt->d >> DstShift) & OpMask); - if (ctxt->rip_relative) + if (ctxt->rip_relative && likely(ctxt->memopp)) ctxt->memopp->addr.mem.ea = address_mask(ctxt, ctxt->memopp->addr.mem.ea + ctxt->_eip); From 6f63d0f6be4e48b3042df9541694f6f2c405017e Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Fri, 28 Oct 2016 20:56:07 +0200 Subject: [PATCH 294/792] parisc: use KERN_CONT when printing device inventory Recent changes to printk require KERN_CONT uses to continue logging messages. So add KERN_CONT to output of device inventory. Signed-off-by: Helge Deller --- arch/parisc/kernel/drivers.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/parisc/kernel/drivers.c b/arch/parisc/kernel/drivers.c index f8150669b8c6..700e2d2da096 100644 --- a/arch/parisc/kernel/drivers.c +++ b/arch/parisc/kernel/drivers.c @@ -873,11 +873,11 @@ static void print_parisc_device(struct parisc_device *dev) if (dev->num_addrs) { int k; - printk(", additional addresses: "); + pr_cont(", additional addresses: "); for (k = 0; k < dev->num_addrs; k++) - printk("0x%lx ", dev->addr[k]); + pr_cont("0x%lx ", dev->addr[k]); } - printk("\n"); + pr_cont("\n"); } /** From f4125cfdb3008363137f744c101e5d76ead760ba Mon Sep 17 00:00:00 2001 From: John David Anglin Date: Fri, 28 Oct 2016 22:13:42 +0200 Subject: [PATCH 295/792] parisc: Avoid trashing sr2 and sr3 in LWS code There is no need to trash sr2 and sr3 in the Light-weight syscall (LWS). sr2 already points to kernel space (it's zero in userspace, otherwise syscalls wouldn't work), and since the LWS code is executed in userspace, we can simply ignore to preload sr3. Signed-off-by: John David Anglin Signed-off-by: Helge Deller --- arch/parisc/kernel/syscall.S | 53 ++++++++++++++++-------------------- 1 file changed, 24 insertions(+), 29 deletions(-) diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S index d03422e5f188..40190dbecdc0 100644 --- a/arch/parisc/kernel/syscall.S +++ b/arch/parisc/kernel/syscall.S @@ -474,11 +474,6 @@ lws_start: comiclr,>> __NR_lws_entries, %r20, %r0 b,n lws_exit_nosys - /* WARNING: Trashing sr2 and sr3 */ - mfsp %sr7,%r1 /* get userspace into sr3 */ - mtsp %r1,%sr3 - mtsp %r0,%sr2 /* get kernel space into sr2 */ - /* Load table start */ ldil L%lws_table, %r1 ldo R%lws_table(%r1), %r28 /* Scratch use of r28 */ @@ -627,9 +622,9 @@ cas_action: stw %r1, 4(%sr2,%r20) #endif /* The load and store could fail */ -1: ldw,ma 0(%sr3,%r26), %r28 +1: ldw,ma 0(%r26), %r28 sub,<> %r28, %r25, %r0 -2: stw,ma %r24, 0(%sr3,%r26) +2: stw,ma %r24, 0(%r26) /* Free lock */ stw,ma %r20, 0(%sr2,%r20) #if ENABLE_LWS_DEBUG @@ -706,9 +701,9 @@ lws_compare_and_swap_2: nop /* 8bit load */ -4: ldb 0(%sr3,%r25), %r25 +4: ldb 0(%r25), %r25 b cas2_lock_start -5: ldb 0(%sr3,%r24), %r24 +5: ldb 0(%r24), %r24 nop nop nop @@ -716,9 +711,9 @@ lws_compare_and_swap_2: nop /* 16bit load */ -6: ldh 0(%sr3,%r25), %r25 +6: ldh 0(%r25), %r25 b cas2_lock_start -7: ldh 0(%sr3,%r24), %r24 +7: ldh 0(%r24), %r24 nop nop nop @@ -726,9 +721,9 @@ lws_compare_and_swap_2: nop /* 32bit load */ -8: ldw 0(%sr3,%r25), %r25 +8: ldw 0(%r25), %r25 b cas2_lock_start -9: ldw 0(%sr3,%r24), %r24 +9: ldw 0(%r24), %r24 nop nop nop @@ -737,14 +732,14 @@ lws_compare_and_swap_2: /* 64bit load */ #ifdef CONFIG_64BIT -10: ldd 0(%sr3,%r25), %r25 -11: ldd 0(%sr3,%r24), %r24 +10: ldd 0(%r25), %r25 +11: ldd 0(%r24), %r24 #else /* Load new value into r22/r23 - high/low */ -10: ldw 0(%sr3,%r25), %r22 -11: ldw 4(%sr3,%r25), %r23 +10: ldw 0(%r25), %r22 +11: ldw 4(%r25), %r23 /* Load new value into fr4 for atomic store later */ -12: flddx 0(%sr3,%r24), %fr4 +12: flddx 0(%r24), %fr4 #endif cas2_lock_start: @@ -794,30 +789,30 @@ cas2_action: ldo 1(%r0),%r28 /* 8bit CAS */ -13: ldb,ma 0(%sr3,%r26), %r29 +13: ldb,ma 0(%r26), %r29 sub,= %r29, %r25, %r0 b,n cas2_end -14: stb,ma %r24, 0(%sr3,%r26) +14: stb,ma %r24, 0(%r26) b cas2_end copy %r0, %r28 nop nop /* 16bit CAS */ -15: ldh,ma 0(%sr3,%r26), %r29 +15: ldh,ma 0(%r26), %r29 sub,= %r29, %r25, %r0 b,n cas2_end -16: sth,ma %r24, 0(%sr3,%r26) +16: sth,ma %r24, 0(%r26) b cas2_end copy %r0, %r28 nop nop /* 32bit CAS */ -17: ldw,ma 0(%sr3,%r26), %r29 +17: ldw,ma 0(%r26), %r29 sub,= %r29, %r25, %r0 b,n cas2_end -18: stw,ma %r24, 0(%sr3,%r26) +18: stw,ma %r24, 0(%r26) b cas2_end copy %r0, %r28 nop @@ -825,22 +820,22 @@ cas2_action: /* 64bit CAS */ #ifdef CONFIG_64BIT -19: ldd,ma 0(%sr3,%r26), %r29 +19: ldd,ma 0(%r26), %r29 sub,*= %r29, %r25, %r0 b,n cas2_end -20: std,ma %r24, 0(%sr3,%r26) +20: std,ma %r24, 0(%r26) copy %r0, %r28 #else /* Compare first word */ -19: ldw,ma 0(%sr3,%r26), %r29 +19: ldw,ma 0(%r26), %r29 sub,= %r29, %r22, %r0 b,n cas2_end /* Compare second word */ -20: ldw,ma 4(%sr3,%r26), %r29 +20: ldw,ma 4(%r26), %r29 sub,= %r29, %r23, %r0 b,n cas2_end /* Perform the store */ -21: fstdx %fr4, 0(%sr3,%r26) +21: fstdx %fr4, 0(%r26) copy %r0, %r28 #endif From 6ed518328d0189e0fdf1bb7c73290d546143ea66 Mon Sep 17 00:00:00 2001 From: John David Anglin Date: Fri, 28 Oct 2016 23:00:34 -0400 Subject: [PATCH 296/792] parisc: Ensure consistent state when switching to kernel stack at syscall entry We have one critical section in the syscall entry path in which we switch from the userspace stack to kernel stack. In the event of an external interrupt, the interrupt code distinguishes between those two states by analyzing the value of sr7. If sr7 is zero, it uses the kernel stack. Therefore it's important, that the value of sr7 is in sync with the currently enabled stack. This patch now disables interrupts while executing the critical section. This prevents the interrupt handler to possibly see an inconsistent state which in the worst case can lead to crashes. Interestingly, in the syscall exit path interrupts were already disabled in the critical section which switches back to the userspace stack. Cc: Signed-off-by: John David Anglin Signed-off-by: Helge Deller --- arch/parisc/kernel/syscall.S | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S index 40190dbecdc0..deec1f8465e5 100644 --- a/arch/parisc/kernel/syscall.S +++ b/arch/parisc/kernel/syscall.S @@ -106,8 +106,6 @@ linux_gateway_entry: mtsp %r0,%sr4 /* get kernel space into sr4 */ mtsp %r0,%sr5 /* get kernel space into sr5 */ mtsp %r0,%sr6 /* get kernel space into sr6 */ - mfsp %sr7,%r1 /* save user sr7 */ - mtsp %r1,%sr3 /* and store it in sr3 */ #ifdef CONFIG_64BIT /* for now we can *always* set the W bit on entry to the syscall @@ -133,6 +131,14 @@ linux_gateway_entry: depdi 0, 31, 32, %r21 1: #endif + + /* We use a rsm/ssm pair to prevent sr3 from being clobbered + * by external interrupts. + */ + mfsp %sr7,%r1 /* save user sr7 */ + rsm PSW_SM_I, %r0 /* disable interrupts */ + mtsp %r1,%sr3 /* and store it in sr3 */ + mfctl %cr30,%r1 xor %r1,%r30,%r30 /* ye olde xor trick */ xor %r1,%r30,%r1 @@ -147,6 +153,7 @@ linux_gateway_entry: */ mtsp %r0,%sr7 /* get kernel space into sr7 */ + ssm PSW_SM_I, %r0 /* enable interrupts */ STREGM %r1,FRAME_SIZE(%r30) /* save r1 (usp) here for now */ mfctl %cr30,%r1 /* get task ptr in %r1 */ LDREG TI_TASK(%r1),%r1 From 6a6e2a14bbc06a627acc71108808fdc866078db4 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Sat, 29 Oct 2016 23:52:43 +0200 Subject: [PATCH 297/792] parisc: Use LINUX_GATEWAY_ADDR define instead of hardcoded value LINUX_GATEWAY_ADDR is defined in unistd.h. Let's use it. Signed-off-by: Helge Deller --- arch/parisc/kernel/syscall.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S index deec1f8465e5..23de307c3052 100644 --- a/arch/parisc/kernel/syscall.S +++ b/arch/parisc/kernel/syscall.S @@ -100,7 +100,7 @@ set_thread_pointer: .endr /* This address must remain fixed at 0x100 for glibc's syscalls to work */ - .align 256 + .align LINUX_GATEWAY_ADDR linux_gateway_entry: gate .+8, %r0 /* become privileged */ mtsp %r0,%sr4 /* get kernel space into sr4 */ From 18088db042dd9ae25e8a1e069eb3a16db601ef8a Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Sat, 29 Oct 2016 23:47:57 +0200 Subject: [PATCH 298/792] parisc: Ignore the pkey system calls for now Signed-off-by: Helge Deller --- arch/parisc/include/uapi/asm/unistd.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/parisc/include/uapi/asm/unistd.h b/arch/parisc/include/uapi/asm/unistd.h index a9b9407f38f7..6b0741e7a7ed 100644 --- a/arch/parisc/include/uapi/asm/unistd.h +++ b/arch/parisc/include/uapi/asm/unistd.h @@ -368,7 +368,9 @@ #define __IGNORE_select /* newselect */ #define __IGNORE_fadvise64 /* fadvise64_64 */ - +#define __IGNORE_pkey_mprotect +#define __IGNORE_pkey_alloc +#define __IGNORE_pkey_free #define LINUX_GATEWAY_ADDR 0x100 From eed6f0eda0a009c282bcdd828c273e1239ae0cac Mon Sep 17 00:00:00 2001 From: Gerd Hoffmann Date: Tue, 18 Oct 2016 15:32:30 -0200 Subject: [PATCH 299/792] virtio-gpu: fix vblank events virtio-gpu sends vblank events in virtio_gpu_crtc_atomic_flush, and because of that it must be called for disabled planes too. Ask drm_atomic_helper_commit_planes to do that. v2: update to use new drm_atomic_helper_commit_planes() API. Signed-off-by: Gerd Hoffmann Signed-off-by: Gustavo Padovan Signed-off-by: Dave Airlie --- drivers/gpu/drm/virtio/virtgpu_display.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/gpu/drm/virtio/virtgpu_display.c b/drivers/gpu/drm/virtio/virtgpu_display.c index 7cf3678623c3..58048709c34e 100644 --- a/drivers/gpu/drm/virtio/virtgpu_display.c +++ b/drivers/gpu/drm/virtio/virtgpu_display.c @@ -338,8 +338,7 @@ static void vgdev_atomic_commit_tail(struct drm_atomic_state *state) drm_atomic_helper_commit_modeset_disables(dev, state); drm_atomic_helper_commit_modeset_enables(dev, state); - drm_atomic_helper_commit_planes(dev, state, - DRM_PLANE_COMMIT_ACTIVE_ONLY); + drm_atomic_helper_commit_planes(dev, state, 0); drm_atomic_helper_commit_hw_done(state); From 382005027fedc50b28d40ae64ef1461cca38953e Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Wed, 2 Nov 2016 19:50:29 +0900 Subject: [PATCH 300/792] sched/core: Fix oops in sched_show_task() When CONFIG_THREAD_INFO_IN_TASK=y, it is possible that an exited thread remains in the task list after its stack pointer was already set to NULL. Therefore, thread_saved_pc() and stack_not_used() in sched_show_task() will trigger NULL pointer dereference if an attempt to dump such thread's traces (e.g. SysRq-t, khungtaskd) is made. Since show_stack() in sched_show_task() calls try_get_task_stack() and sched_show_task() is called from interrupt context, calling try_get_task_stack() from sched_show_task() will be safe as well. Signed-off-by: Tetsuo Handa Acked-by: Andy Lutomirski Acked-by: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: bp@alien8.de Cc: brgerst@gmail.com Cc: jann@thejh.net Cc: keescook@chromium.org Cc: linux-api@vger.kernel.org Cc: tycho.andersen@canonical.com Link: http://lkml.kernel.org/r/201611021950.FEJ34368.HFFJOOMLtQOVSF@I-love.SAKURA.ne.jp Signed-off-by: Ingo Molnar --- kernel/sched/core.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 42d4027f9e26..9abf66b6c271 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -5192,6 +5192,8 @@ void sched_show_task(struct task_struct *p) int ppid; unsigned long state = p->state; + if (!try_get_task_stack(p)) + return; if (state) state = __ffs(state) + 1; printk(KERN_INFO "%-15.15s %c", p->comm, @@ -5221,6 +5223,7 @@ void sched_show_task(struct task_struct *p) print_worker_info(KERN_INFO, p); show_stack(p, NULL); + put_task_stack(p); } void show_state_filter(unsigned long state_filter) From 8243d5597793b5e85143c9a935e1b971c59740a9 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 1 Nov 2016 17:47:18 -0600 Subject: [PATCH 301/792] sched/core: Remove pointless printout in sched_show_task() In sched_show_task() we print out a useless hex number, not even a symbol, and there's a big question mark whether this even makes sense anyway, I suspect we should just remove it all. Signed-off-by: Linus Torvalds Acked-by: Andy Lutomirski Cc: Peter Zijlstra Cc: Tetsuo Handa Cc: Thomas Gleixner Cc: bp@alien8.de Cc: brgerst@gmail.com Cc: jann@thejh.net Cc: keescook@chromium.org Cc: linux-api@vger.kernel.org Cc: tycho.andersen@canonical.com Link: http://lkml.kernel.org/r/CA+55aFzphURPFzAvU4z6Moy7ZmimcwPuUdYU8bj9z0J+S8X1rw@mail.gmail.com Signed-off-by: Ingo Molnar --- kernel/sched/core.c | 9 --------- 1 file changed, 9 deletions(-) diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 9abf66b6c271..154fd689fe02 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -5198,17 +5198,8 @@ void sched_show_task(struct task_struct *p) state = __ffs(state) + 1; printk(KERN_INFO "%-15.15s %c", p->comm, state < sizeof(stat_nam) - 1 ? stat_nam[state] : '?'); -#if BITS_PER_LONG == 32 - if (state == TASK_RUNNING) - printk(KERN_CONT " running "); - else - printk(KERN_CONT " %08lx ", thread_saved_pc(p)); -#else if (state == TASK_RUNNING) printk(KERN_CONT " running task "); - else - printk(KERN_CONT " %016lx ", thread_saved_pc(p)); -#endif #ifdef CONFIG_DEBUG_STACK_USAGE free = stack_not_used(p); #endif From cfbd950d5e6e649c6c1a88925feada64f890c894 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 20 Oct 2016 08:46:32 +0200 Subject: [PATCH 302/792] video: ARM CLCD: fix Vexpress regression The CLCD does not come up on Versatile Express as it does not (currently) have a syscon node for controlling the block apart from the CLCD itself. Make sure the .init() function can bail out without an error making it probe again. Reported-by: Amit Pundir Signed-off-by: Linus Walleij Tested-by: Amit Pundir Tested-by: Nicolae Rosia Signed-off-by: Tomi Valkeinen --- drivers/video/fbdev/amba-clcd-versatile.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/video/fbdev/amba-clcd-versatile.c b/drivers/video/fbdev/amba-clcd-versatile.c index 19ad8645d93c..e5d9bfc1703a 100644 --- a/drivers/video/fbdev/amba-clcd-versatile.c +++ b/drivers/video/fbdev/amba-clcd-versatile.c @@ -526,8 +526,8 @@ int versatile_clcd_init_panel(struct clcd_fb *fb, np = of_find_matching_node_and_match(NULL, versatile_clcd_of_match, &clcd_id); if (!np) { - dev_err(dev, "no Versatile syscon node\n"); - return -ENODEV; + /* Vexpress does not have this */ + return 0; } versatile_clcd_type = (enum versatile_clcd)clcd_id->data; From 667121ace9dbafb368618dbabcf07901c962ddac Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sat, 29 Oct 2016 21:28:18 +0200 Subject: [PATCH 303/792] firewire: net: guard against rx buffer overflows The IP-over-1394 driver firewire-net lacked input validation when handling incoming fragmented datagrams. A maliciously formed fragment with a respectively large datagram_offset would cause a memcpy past the datagram buffer. So, drop any packets carrying a fragment with offset + length larger than datagram_size. In addition, ensure that - GASP header, unfragmented encapsulation header, or fragment encapsulation header actually exists before we access it, - the encapsulated datagram or fragment is of nonzero size. Reported-by: Eyal Itkin Reviewed-by: Eyal Itkin Fixes: CVE 2016-8633 Cc: stable@vger.kernel.org Signed-off-by: Stefan Richter --- drivers/firewire/net.c | 51 +++++++++++++++++++++++++++++------------- 1 file changed, 35 insertions(+), 16 deletions(-) diff --git a/drivers/firewire/net.c b/drivers/firewire/net.c index 309311b1faae..cbaa8d776d83 100644 --- a/drivers/firewire/net.c +++ b/drivers/firewire/net.c @@ -578,6 +578,9 @@ static int fwnet_incoming_packet(struct fwnet_device *dev, __be32 *buf, int len, int retval; u16 ether_type; + if (len <= RFC2374_UNFRAG_HDR_SIZE) + return 0; + hdr.w0 = be32_to_cpu(buf[0]); lf = fwnet_get_hdr_lf(&hdr); if (lf == RFC2374_HDR_UNFRAG) { @@ -602,7 +605,12 @@ static int fwnet_incoming_packet(struct fwnet_device *dev, __be32 *buf, int len, return fwnet_finish_incoming_packet(net, skb, source_node_id, is_broadcast, ether_type); } + /* A datagram fragment has been received, now the fun begins. */ + + if (len <= RFC2374_FRAG_HDR_SIZE) + return 0; + hdr.w1 = ntohl(buf[1]); buf += 2; len -= RFC2374_FRAG_HDR_SIZE; @@ -616,6 +624,9 @@ static int fwnet_incoming_packet(struct fwnet_device *dev, __be32 *buf, int len, datagram_label = fwnet_get_hdr_dgl(&hdr); dg_size = fwnet_get_hdr_dg_size(&hdr); /* ??? + 1 */ + if (fg_off + len > dg_size) + return 0; + spin_lock_irqsave(&dev->lock, flags); peer = fwnet_peer_find_by_node_id(dev, source_node_id, generation); @@ -722,6 +733,22 @@ static void fwnet_receive_packet(struct fw_card *card, struct fw_request *r, fw_send_response(card, r, rcode); } +static int gasp_source_id(__be32 *p) +{ + return be32_to_cpu(p[0]) >> 16; +} + +static u32 gasp_specifier_id(__be32 *p) +{ + return (be32_to_cpu(p[0]) & 0xffff) << 8 | + (be32_to_cpu(p[1]) & 0xff000000) >> 24; +} + +static u32 gasp_version(__be32 *p) +{ + return be32_to_cpu(p[1]) & 0xffffff; +} + static void fwnet_receive_broadcast(struct fw_iso_context *context, u32 cycle, size_t header_length, void *header, void *data) { @@ -731,9 +758,6 @@ static void fwnet_receive_broadcast(struct fw_iso_context *context, __be32 *buf_ptr; int retval; u32 length; - u16 source_node_id; - u32 specifier_id; - u32 ver; unsigned long offset; unsigned long flags; @@ -750,22 +774,17 @@ static void fwnet_receive_broadcast(struct fw_iso_context *context, spin_unlock_irqrestore(&dev->lock, flags); - specifier_id = (be32_to_cpu(buf_ptr[0]) & 0xffff) << 8 - | (be32_to_cpu(buf_ptr[1]) & 0xff000000) >> 24; - ver = be32_to_cpu(buf_ptr[1]) & 0xffffff; - source_node_id = be32_to_cpu(buf_ptr[0]) >> 16; - - if (specifier_id == IANA_SPECIFIER_ID && - (ver == RFC2734_SW_VERSION + if (length > IEEE1394_GASP_HDR_SIZE && + gasp_specifier_id(buf_ptr) == IANA_SPECIFIER_ID && + (gasp_version(buf_ptr) == RFC2734_SW_VERSION #if IS_ENABLED(CONFIG_IPV6) - || ver == RFC3146_SW_VERSION + || gasp_version(buf_ptr) == RFC3146_SW_VERSION #endif - )) { - buf_ptr += 2; - length -= IEEE1394_GASP_HDR_SIZE; - fwnet_incoming_packet(dev, buf_ptr, length, source_node_id, + )) + fwnet_incoming_packet(dev, buf_ptr + 2, + length - IEEE1394_GASP_HDR_SIZE, + gasp_source_id(buf_ptr), context->card->generation, true); - } packet.payload_length = dev->rcv_buffer_size; packet.interrupt = 1; From e9300a4b7bbae83af1f7703938c94cf6dc6d308f Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sun, 30 Oct 2016 17:32:01 +0100 Subject: [PATCH 304/792] firewire: net: fix fragmented datagram_size off-by-one RFC 2734 defines the datagram_size field in fragment encapsulation headers thus: datagram_size: The encoded size of the entire IP datagram. The value of datagram_size [...] SHALL be one less than the value of Total Length in the datagram's IP header (see STD 5, RFC 791). Accordingly, the eth1394 driver of Linux 2.6.36 and older set and got this field with a -/+1 offset: ether1394_tx() /* transmit */ ether1394_encapsulate_prep() hdr->ff.dg_size = dg_size - 1; ether1394_data_handler() /* receive */ if (hdr->common.lf == ETH1394_HDR_LF_FF) dg_size = hdr->ff.dg_size + 1; else dg_size = hdr->sf.dg_size + 1; Likewise, I observe OS X 10.4 and Windows XP Pro SP3 to transmit 1500 byte sized datagrams in fragments with datagram_size=1499 if link fragmentation is required. Only firewire-net sets and gets datagram_size without this offset. The result is lacking interoperability of firewire-net with OS X, Windows XP, and presumably Linux' eth1394. (I did not test with the latter.) For example, FTP data transfers to a Linux firewire-net box with max_rec smaller than the 1500 bytes MTU - from OS X fail entirely, - from Win XP start out with a bunch of fragmented datagrams which time out, then continue with unfragmented datagrams because Win XP temporarily reduces the MTU to 576 bytes. So let's fix firewire-net's datagram_size accessors. Note that firewire-net thereby loses interoperability with unpatched firewire-net, but only if link fragmentation is employed. (This happens with large broadcast datagrams, and with large datagrams on several FireWire CardBus cards with smaller max_rec than equivalent PCI cards, and it can be worked around by setting a small enough MTU.) Cc: stable@vger.kernel.org Signed-off-by: Stefan Richter --- drivers/firewire/net.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/firewire/net.c b/drivers/firewire/net.c index cbaa8d776d83..15475892af0c 100644 --- a/drivers/firewire/net.c +++ b/drivers/firewire/net.c @@ -73,13 +73,13 @@ struct rfc2734_header { #define fwnet_get_hdr_lf(h) (((h)->w0 & 0xc0000000) >> 30) #define fwnet_get_hdr_ether_type(h) (((h)->w0 & 0x0000ffff)) -#define fwnet_get_hdr_dg_size(h) (((h)->w0 & 0x0fff0000) >> 16) +#define fwnet_get_hdr_dg_size(h) ((((h)->w0 & 0x0fff0000) >> 16) + 1) #define fwnet_get_hdr_fg_off(h) (((h)->w0 & 0x00000fff)) #define fwnet_get_hdr_dgl(h) (((h)->w1 & 0xffff0000) >> 16) -#define fwnet_set_hdr_lf(lf) ((lf) << 30) +#define fwnet_set_hdr_lf(lf) ((lf) << 30) #define fwnet_set_hdr_ether_type(et) (et) -#define fwnet_set_hdr_dg_size(dgs) ((dgs) << 16) +#define fwnet_set_hdr_dg_size(dgs) (((dgs) - 1) << 16) #define fwnet_set_hdr_fg_off(fgo) (fgo) #define fwnet_set_hdr_dgl(dgl) ((dgl) << 16) @@ -622,7 +622,7 @@ static int fwnet_incoming_packet(struct fwnet_device *dev, __be32 *buf, int len, fg_off = fwnet_get_hdr_fg_off(&hdr); } datagram_label = fwnet_get_hdr_dgl(&hdr); - dg_size = fwnet_get_hdr_dg_size(&hdr); /* ??? + 1 */ + dg_size = fwnet_get_hdr_dg_size(&hdr); if (fg_off + len > dg_size) return 0; From a79a812131b07254c09cf325ec68c0d05aaed0b5 Mon Sep 17 00:00:00 2001 From: Alexey Brodkin Date: Thu, 3 Nov 2016 18:06:13 +0300 Subject: [PATCH 305/792] arc: Implement arch-specific dma_map_ops.mmap We used to use generic implementation of dma_map_ops.mmap which is dma_common_mmap() but that only worked for simpler cached mappings when vaddr = paddr. If a driver requests uncached DMA buffer kernel maps it to virtual address so that MMU gets involved and page uncached status takes into account. In that case usage of dma_common_mmap() lead to mapping of vaddr to vaddr for user-space which is obviously wrong. For more detals please refer to verbose explanation here [1]. So here we implement our own version of mmap() which always deals with dma_addr and maps underlying memory to user-space properly (note that DMA buffer mapped to user-space is always uncached because there's no way to properly manage cache from user-space). [1] https://lkml.org/lkml/2016/10/26/973 Reviewed-by: Catalin Marinas Cc: Marek Szyprowski Cc: #4.5+ Signed-off-by: Alexey Brodkin Signed-off-by: Vineet Gupta --- arch/arc/mm/dma.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/arch/arc/mm/dma.c b/arch/arc/mm/dma.c index 60aab5a7522b..cd8aad8226dd 100644 --- a/arch/arc/mm/dma.c +++ b/arch/arc/mm/dma.c @@ -105,6 +105,31 @@ static void arc_dma_free(struct device *dev, size_t size, void *vaddr, __free_pages(page, get_order(size)); } +static int arc_dma_mmap(struct device *dev, struct vm_area_struct *vma, + void *cpu_addr, dma_addr_t dma_addr, size_t size, + unsigned long attrs) +{ + unsigned long user_count = vma_pages(vma); + unsigned long count = PAGE_ALIGN(size) >> PAGE_SHIFT; + unsigned long pfn = __phys_to_pfn(plat_dma_to_phys(dev, dma_addr)); + unsigned long off = vma->vm_pgoff; + int ret = -ENXIO; + + vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot); + + if (dma_mmap_from_coherent(dev, vma, cpu_addr, size, &ret)) + return ret; + + if (off < count && user_count <= (count - off)) { + ret = remap_pfn_range(vma, vma->vm_start, + pfn + off, + user_count << PAGE_SHIFT, + vma->vm_page_prot); + } + + return ret; +} + /* * streaming DMA Mapping API... * CPU accesses page via normal paddr, thus needs to explicitly made @@ -193,6 +218,7 @@ static int arc_dma_supported(struct device *dev, u64 dma_mask) struct dma_map_ops arc_dma_ops = { .alloc = arc_dma_alloc, .free = arc_dma_free, + .mmap = arc_dma_mmap, .map_page = arc_dma_map_page, .map_sg = arc_dma_map_sg, .sync_single_for_device = arc_dma_sync_single_for_device, From 5459ada2b3cd69e6bf1b0c034feb810975d0072b Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Thu, 27 Oct 2016 16:49:20 -0700 Subject: [PATCH 306/792] HID: sensor-hub: Fix packing of result buffer for feature report When report count is more than one and report size is not 4 bytes, then we need some packing into result buffer from the caller of function sensor_hub_get_feature. By default the value extracted from a field is 4 bytes from hid core (using hid_hw_request(hsdev->hdev, report, HID_REQ_GET_REPORT)), even if report size if less than 4 byte. So when we copy data to user buffer in sensor_hub_get_feature, we need to only copy report size bytes even when report count is more than 1. This is not an issue for most of the sensor hub fields as report count will be 1 where we already copy only report size bytes, but some string fields like description, it is a problem as the report count will be more than 1. For example: Field(6) Physical(Sensor.OtherCustom) Application(Sensor.Sensor) Usage(11) Sensor.0306 Sensor.0306 Sensor.0306 Sensor.0306 Sensor.0306 Sensor.0306 Sensor.0306 Sensor.0306 Sensor.0306 Sensor.0306 Sensor.0306 Report Size(16) Report Count(11) Here since the report size is 2 bytes, we will have 2 additional bytes of 0s copied into user buffer, if we directly copy to user buffer from report->field[]->value This change will copy report size bytes into the buffer of caller for each usage report->field[]->value. So for example without this change, the data displayed for a custom sensor field "sensor-model": 76 00 101 00 110 00 111 00 118 00 111 (truncated to report count of 11) With change 76 101 110 111 118 111 32 89 111 103 97 ("Lenovo Yoga" in ASCII ) Signed-off-by: Srinivas Pandruvada Signed-off-by: Jiri Kosina --- drivers/hid/hid-sensor-hub.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/drivers/hid/hid-sensor-hub.c b/drivers/hid/hid-sensor-hub.c index 658a607dc6d9..c5c3d6111729 100644 --- a/drivers/hid/hid-sensor-hub.c +++ b/drivers/hid/hid-sensor-hub.c @@ -251,6 +251,9 @@ int sensor_hub_get_feature(struct hid_sensor_hub_device *hsdev, u32 report_id, struct sensor_hub_data *data = hid_get_drvdata(hsdev->hdev); int report_size; int ret = 0; + u8 *val_ptr; + int buffer_index = 0; + int i; mutex_lock(&data->mutex); report = sensor_hub_report(report_id, hsdev->hdev, HID_FEATURE_REPORT); @@ -271,7 +274,17 @@ int sensor_hub_get_feature(struct hid_sensor_hub_device *hsdev, u32 report_id, goto done_proc; } ret = min(report_size, buffer_size); - memcpy(buffer, report->field[field_index]->value, ret); + + val_ptr = (u8 *)report->field[field_index]->value; + for (i = 0; i < report->field[field_index]->report_count; ++i) { + if (buffer_index >= ret) + break; + + memcpy(&((u8 *)buffer)[buffer_index], val_ptr, + report->field[field_index]->report_size / 8); + val_ptr += sizeof(__s32); + buffer_index += (report->field[field_index]->report_size / 8); + } done_proc: mutex_unlock(&data->mutex); From 1793e1c5217c2dc447d79720399a1d4e60c47761 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 29 Oct 2016 13:17:40 +0200 Subject: [PATCH 307/792] HID: intel-ish-hid: Fix !CONFIG_PM build warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix drivers/hid/intel-ish-hid/ipc/pci-ish.c:247:12: warning: ‘ish_suspend’ defined but not used [-Wunused-function] static int ish_suspend(struct device *device) ^ drivers/hid/intel-ish-hid/ipc/pci-ish.c:282:12: warning: ‘ish_resume’ defined but not used [-Wunused-function] static int ish_resume(struct device *device) ^ by sticking them in the CONFIG_PM range too. Signed-off-by: Borislav Petkov Cc: Srinivas Pandruvada Cc: Jiri Kosina Cc: Benjamin Tissoires Cc: Wei Yongjun Cc: linux-input@vger.kernel.org Acked-by: Srinivas Pandruvada Signed-off-by: Jiri Kosina --- drivers/hid/intel-ish-hid/ipc/pci-ish.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/hid/intel-ish-hid/ipc/pci-ish.c b/drivers/hid/intel-ish-hid/ipc/pci-ish.c index 42f0beeb09fd..7e3622a724aa 100644 --- a/drivers/hid/intel-ish-hid/ipc/pci-ish.c +++ b/drivers/hid/intel-ish-hid/ipc/pci-ish.c @@ -202,6 +202,7 @@ static void ish_remove(struct pci_dev *pdev) kfree(ishtp_dev); } +#ifdef CONFIG_PM static struct device *ish_resume_device; /** @@ -293,7 +294,6 @@ static int ish_resume(struct device *device) return 0; } -#ifdef CONFIG_PM static const struct dev_pm_ops ish_pm_ops = { .suspend = ish_suspend, .resume = ish_resume, @@ -301,7 +301,7 @@ static const struct dev_pm_ops ish_pm_ops = { #define ISHTP_ISH_PM_OPS (&ish_pm_ops) #else #define ISHTP_ISH_PM_OPS NULL -#endif +#endif /* CONFIG_PM */ static struct pci_driver ish_driver = { .name = KBUILD_MODNAME, From cf0ea4da4c7df11f7a508b2f37518e0f117f3791 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 3 Nov 2016 12:31:41 +0100 Subject: [PATCH 308/792] HID: usbhid: add ATEN CS962 to list of quirky devices Like many similar devices it needs a quirk to work. Issuing the request gets the device into an irrecoverable state. Signed-off-by: Oliver Neukum CC: stable@vger.kernel.org Signed-off-by: Jiri Kosina --- drivers/hid/hid-ids.h | 1 + drivers/hid/usbhid/hid-quirks.c | 1 + 2 files changed, 2 insertions(+) diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 6cfb5cacc253..575aa65436d1 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -179,6 +179,7 @@ #define USB_DEVICE_ID_ATEN_4PORTKVM 0x2205 #define USB_DEVICE_ID_ATEN_4PORTKVMC 0x2208 #define USB_DEVICE_ID_ATEN_CS682 0x2213 +#define USB_DEVICE_ID_ATEN_CS692 0x8021 #define USB_VENDOR_ID_ATMEL 0x03eb #define USB_DEVICE_ID_ATMEL_MULTITOUCH 0x211c diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c index 354d49ea36dd..e6cfd323babc 100644 --- a/drivers/hid/usbhid/hid-quirks.c +++ b/drivers/hid/usbhid/hid-quirks.c @@ -63,6 +63,7 @@ static const struct hid_blacklist { { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVM, HID_QUIRK_NOGET }, { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVMC, HID_QUIRK_NOGET }, { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_CS682, HID_QUIRK_NOGET }, + { USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_CS692, HID_QUIRK_NOGET }, { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_FIGHTERSTICK, HID_QUIRK_NOGET }, { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_COMBATSTICK, HID_QUIRK_NOGET }, { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_FLIGHT_SIM_ECLIPSE_YOKE, HID_QUIRK_NOGET }, From 14135f30e33ce37b22529f73660d7369cf424375 Mon Sep 17 00:00:00 2001 From: WANG Cong Date: Tue, 1 Nov 2016 16:04:36 -0700 Subject: [PATCH 309/792] inet: fix sleeping inside inet_wait_for_connect() Andrey reported this kernel warning: WARNING: CPU: 0 PID: 4608 at kernel/sched/core.c:7724 __might_sleep+0x14c/0x1a0 kernel/sched/core.c:7719 do not call blocking ops when !TASK_RUNNING; state=1 set at [] prepare_to_wait+0xbc/0x210 kernel/sched/wait.c:178 Modules linked in: CPU: 0 PID: 4608 Comm: syz-executor Not tainted 4.9.0-rc2+ #320 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 ffff88006625f7a0 ffffffff81b46914 ffff88006625f818 0000000000000000 ffffffff84052960 0000000000000000 ffff88006625f7e8 ffffffff81111237 ffff88006aceac00 ffffffff00001e2c ffffed000cc4beff ffffffff84052960 Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [] dump_stack+0xb3/0x10f lib/dump_stack.c:51 [] __warn+0x1a7/0x1f0 kernel/panic.c:550 [] warn_slowpath_fmt+0xac/0xd0 kernel/panic.c:565 [] __might_sleep+0x14c/0x1a0 kernel/sched/core.c:7719 [< inline >] slab_pre_alloc_hook mm/slab.h:393 [< inline >] slab_alloc_node mm/slub.c:2634 [< inline >] slab_alloc mm/slub.c:2716 [] __kmalloc_track_caller+0x150/0x2a0 mm/slub.c:4240 [] kmemdup+0x24/0x50 mm/util.c:113 [] dccp_feat_clone_sp_val.part.5+0x4f/0xe0 net/dccp/feat.c:374 [< inline >] dccp_feat_clone_sp_val net/dccp/feat.c:1141 [< inline >] dccp_feat_change_recv net/dccp/feat.c:1141 [] dccp_feat_parse_options+0xaa1/0x13d0 net/dccp/feat.c:1411 [] dccp_parse_options+0x721/0x1010 net/dccp/options.c:128 [] dccp_rcv_state_process+0x200/0x15b0 net/dccp/input.c:644 [] dccp_v4_do_rcv+0xf4/0x1a0 net/dccp/ipv4.c:681 [< inline >] sk_backlog_rcv ./include/net/sock.h:872 [] __release_sock+0x126/0x3a0 net/core/sock.c:2044 [] release_sock+0x59/0x1c0 net/core/sock.c:2502 [< inline >] inet_wait_for_connect net/ipv4/af_inet.c:547 [] __inet_stream_connect+0x5d2/0xbb0 net/ipv4/af_inet.c:617 [] inet_stream_connect+0x55/0xa0 net/ipv4/af_inet.c:656 [] SYSC_connect+0x244/0x2f0 net/socket.c:1533 [] SyS_connect+0x24/0x30 net/socket.c:1514 [] entry_SYSCALL_64_fastpath+0x1f/0xc2 arch/x86/entry/entry_64.S:209 Unlike commit 26cabd31259ba43f68026ce3f62b78094124333f ("sched, net: Clean up sk_wait_event() vs. might_sleep()"), the sleeping function is called before schedule_timeout(), this is indeed a bug. Fix this by moving the wait logic to the new API, it is similar to commit ff960a731788a7408b6f66ec4fd772ff18833211 ("netdev, sched/wait: Fix sleeping inside wait event"). Reported-by: Andrey Konovalov Cc: Andrey Konovalov Cc: Eric Dumazet Cc: Peter Zijlstra Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- net/ipv4/af_inet.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c index 9648c97e541f..5ddf5cda07f4 100644 --- a/net/ipv4/af_inet.c +++ b/net/ipv4/af_inet.c @@ -533,9 +533,9 @@ EXPORT_SYMBOL(inet_dgram_connect); static long inet_wait_for_connect(struct sock *sk, long timeo, int writebias) { - DEFINE_WAIT(wait); + DEFINE_WAIT_FUNC(wait, woken_wake_function); - prepare_to_wait(sk_sleep(sk), &wait, TASK_INTERRUPTIBLE); + add_wait_queue(sk_sleep(sk), &wait); sk->sk_write_pending += writebias; /* Basic assumption: if someone sets sk->sk_err, he _must_ @@ -545,13 +545,12 @@ static long inet_wait_for_connect(struct sock *sk, long timeo, int writebias) */ while ((1 << sk->sk_state) & (TCPF_SYN_SENT | TCPF_SYN_RECV)) { release_sock(sk); - timeo = schedule_timeout(timeo); + timeo = wait_woken(&wait, TASK_INTERRUPTIBLE, timeo); lock_sock(sk); if (signal_pending(current) || !timeo) break; - prepare_to_wait(sk_sleep(sk), &wait, TASK_INTERRUPTIBLE); } - finish_wait(sk_sleep(sk), &wait); + remove_wait_queue(sk_sleep(sk), &wait); sk->sk_write_pending -= writebias; return timeo; } From 0b53df1e9e07984a93ad3454686740fc2f4d6b4b Mon Sep 17 00:00:00 2001 From: Hariprasad Shenai Date: Wed, 2 Nov 2016 10:52:53 +0530 Subject: [PATCH 310/792] cxgb4: correct device ID of T6 adapter Signed-off-by: Hariprasad Shenai Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/t4_pci_id_tbl.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_pci_id_tbl.h b/drivers/net/ethernet/chelsio/cxgb4/t4_pci_id_tbl.h index 50812a1d67bd..df1573c4a659 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_pci_id_tbl.h +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_pci_id_tbl.h @@ -178,9 +178,9 @@ CH_PCI_DEVICE_ID_TABLE_DEFINE_BEGIN CH_PCI_ID_TABLE_FENTRY(0x6005), CH_PCI_ID_TABLE_FENTRY(0x6006), CH_PCI_ID_TABLE_FENTRY(0x6007), + CH_PCI_ID_TABLE_FENTRY(0x6008), CH_PCI_ID_TABLE_FENTRY(0x6009), CH_PCI_ID_TABLE_FENTRY(0x600d), - CH_PCI_ID_TABLE_FENTRY(0x6010), CH_PCI_ID_TABLE_FENTRY(0x6011), CH_PCI_ID_TABLE_FENTRY(0x6014), CH_PCI_ID_TABLE_FENTRY(0x6015), From 9512925a2cc2b1cd0206bb93bad200a69716f998 Mon Sep 17 00:00:00 2001 From: "Mintz, Yuval" Date: Wed, 2 Nov 2016 16:36:46 +0200 Subject: [PATCH 311/792] qede: Correctly map aggregation replacement pages Driver allocates replacement buffers before-hand to make sure whenever an aggregation begins there would be a replacement for the Rx buffers, as we can't release the buffer until aggregation is terminated and driver logic assumes the Rx rings are always full. For every other Rx page that's being allocated [I.e., regular] the page is being completely mapped while for the replacement buffers only the first portion of the page is being mapped. This means that: a. Once replacement buffer replenishes the regular Rx ring, assuming there's more than a single packet on page we'd post unmapped memory toward HW [assuming mapping is actually done in granularity smaller than page]. b. Unmaps are being done for the entire page, which is incorrect. Fixes: 55482edc25f06 ("qede: Add slowpath/fastpath support and enable hardware GRO") Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qede/qede_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c index 7def29aaf65c..85f46dbecd5b 100644 --- a/drivers/net/ethernet/qlogic/qede/qede_main.c +++ b/drivers/net/ethernet/qlogic/qede/qede_main.c @@ -2839,7 +2839,7 @@ static int qede_alloc_sge_mem(struct qede_dev *edev, struct qede_rx_queue *rxq) } mapping = dma_map_page(&edev->pdev->dev, replace_buf->data, 0, - rxq->rx_buf_size, DMA_FROM_DEVICE); + PAGE_SIZE, DMA_FROM_DEVICE); if (unlikely(dma_mapping_error(&edev->pdev->dev, mapping))) { DP_NOTICE(edev, "Failed to map TPA replacement buffer\n"); From ac9e70b17ecd7c6e933ff2eaf7ab37429e71bf4d Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 2 Nov 2016 07:53:17 -0700 Subject: [PATCH 312/792] tcp: fix potential memory corruption MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Imagine initial value of max_skb_frags is 17, and last skb in write queue has 15 frags. Then max_skb_frags is lowered to 14 or smaller value. tcp_sendmsg() will then be allowed to add additional page frags and eventually go past MAX_SKB_FRAGS, overflowing struct skb_shared_info. Fixes: 5f74f82ea34c ("net:Add sysctl_max_skb_frags") Signed-off-by: Eric Dumazet Cc: Hans Westgaard Ry Cc: Håkon Bugge Signed-off-by: David S. Miller --- net/ipv4/tcp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 3251fe71f39f..18238ef8135a 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -1241,7 +1241,7 @@ new_segment: if (!skb_can_coalesce(skb, i, pfrag->page, pfrag->offset)) { - if (i == sysctl_max_skb_frags || !sg) { + if (i >= sysctl_max_skb_frags || !sg) { tcp_mark_push(tp, skb); goto new_segment; } From da96786e26c3ae47316db2b92046b11268c4379c Mon Sep 17 00:00:00 2001 From: David Ahern Date: Wed, 2 Nov 2016 12:08:25 -0700 Subject: [PATCH 313/792] net: tcp: check skb is non-NULL for exact match on lookups Andrey reported the following error report while running the syzkaller fuzzer: general protection fault: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 0 PID: 648 Comm: syz-executor Not tainted 4.9.0-rc3+ #333 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff8800398c4480 task.stack: ffff88003b468000 RIP: 0010:[] [< inline >] inet_exact_dif_match include/net/tcp.h:808 RIP: 0010:[] [] __inet_lookup_listener+0xb6/0x500 net/ipv4/inet_hashtables.c:219 RSP: 0018:ffff88003b46f270 EFLAGS: 00010202 RAX: 0000000000000004 RBX: 0000000000004242 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ffffc90000e3c000 RDI: 0000000000000054 RBP: ffff88003b46f2d8 R08: 0000000000004000 R09: ffffffff830910e7 R10: 0000000000000000 R11: 000000000000000a R12: ffffffff867fa0c0 R13: 0000000000004242 R14: 0000000000000003 R15: dffffc0000000000 FS: 00007fb135881700(0000) GS:ffff88003ec00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020cc3000 CR3: 000000006d56a000 CR4: 00000000000006f0 Stack: 0000000000000000 000000000601a8c0 0000000000000000 ffffffff00004242 424200003b9083c2 ffff88003def4041 ffffffff84e7e040 0000000000000246 ffff88003a0911c0 0000000000000000 ffff88003a091298 ffff88003b9083ae Call Trace: [] tcp_v4_send_reset+0x584/0x1700 net/ipv4/tcp_ipv4.c:643 [] tcp_v4_rcv+0x198b/0x2e50 net/ipv4/tcp_ipv4.c:1718 [] ip_local_deliver_finish+0x332/0xad0 net/ipv4/ip_input.c:216 ... MD5 has a code path that calls __inet_lookup_listener with a null skb, so inet{6}_exact_dif_match needs to check skb against null before pulling the flag. Fixes: a04a480d4392 ("net: Require exact match for TCP socket lookups if dif is l3mdev") Reported-by: Andrey Konovalov Signed-off-by: David Ahern Tested-by: Andrey Konovalov Signed-off-by: David S. Miller --- include/linux/ipv6.h | 2 +- include/net/tcp.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h index ca1ad9ebbc92..a0649973ee5b 100644 --- a/include/linux/ipv6.h +++ b/include/linux/ipv6.h @@ -149,7 +149,7 @@ static inline bool inet6_exact_dif_match(struct net *net, struct sk_buff *skb) { #if defined(CONFIG_NET_L3_MASTER_DEV) if (!net->ipv4.sysctl_tcp_l3mdev_accept && - ipv6_l3mdev_skb(IP6CB(skb)->flags)) + skb && ipv6_l3mdev_skb(IP6CB(skb)->flags)) return true; #endif return false; diff --git a/include/net/tcp.h b/include/net/tcp.h index 5b82d4d94834..304a8e17bc87 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -805,7 +805,7 @@ static inline bool inet_exact_dif_match(struct net *net, struct sk_buff *skb) { #if IS_ENABLED(CONFIG_NET_L3_MASTER_DEV) if (!net->ipv4.sysctl_tcp_l3mdev_accept && - ipv4_l3mdev_skb(TCP_SKB_CB(skb)->header.h4.flags)) + skb && ipv4_l3mdev_skb(TCP_SKB_CB(skb)->header.h4.flags)) return true; #endif return false; From 9ee6c5dc816aa8256257f2cd4008a9291ec7e985 Mon Sep 17 00:00:00 2001 From: Lance Richardson Date: Wed, 2 Nov 2016 16:36:17 -0400 Subject: [PATCH 314/792] ipv4: allow local fragmentation in ip_finish_output_gso() Some configurations (e.g. geneve interface with default MTU of 1500 over an ethernet interface with 1500 MTU) result in the transmission of packets that exceed the configured MTU. While this should be considered to be a "bad" configuration, it is still allowed and should not result in the sending of packets that exceed the configured MTU. Fix by dropping the assumption in ip_finish_output_gso() that locally originated gso packets will never need fragmentation. Basic testing using iperf (observing CPU usage and bandwidth) have shown no measurable performance impact for traffic not requiring fragmentation. Fixes: c7ba65d7b649 ("net: ip: push gso skb forwarding handling down the stack") Reported-by: Jan Tluka Signed-off-by: Lance Richardson Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller --- include/net/ip.h | 3 +-- net/ipv4/ip_forward.c | 2 +- net/ipv4/ip_output.c | 6 ++---- net/ipv4/ip_tunnel_core.c | 11 ----------- net/ipv4/ipmr.c | 2 +- 5 files changed, 5 insertions(+), 19 deletions(-) diff --git a/include/net/ip.h b/include/net/ip.h index 5413883ac47f..d3a107850a41 100644 --- a/include/net/ip.h +++ b/include/net/ip.h @@ -47,8 +47,7 @@ struct inet_skb_parm { #define IPSKB_REROUTED BIT(4) #define IPSKB_DOREDIRECT BIT(5) #define IPSKB_FRAG_PMTU BIT(6) -#define IPSKB_FRAG_SEGS BIT(7) -#define IPSKB_L3SLAVE BIT(8) +#define IPSKB_L3SLAVE BIT(7) u16 frag_max_size; }; diff --git a/net/ipv4/ip_forward.c b/net/ipv4/ip_forward.c index 8b4ffd216839..9f0a7b96646f 100644 --- a/net/ipv4/ip_forward.c +++ b/net/ipv4/ip_forward.c @@ -117,7 +117,7 @@ int ip_forward(struct sk_buff *skb) if (opt->is_strictroute && rt->rt_uses_gateway) goto sr_failed; - IPCB(skb)->flags |= IPSKB_FORWARDED | IPSKB_FRAG_SEGS; + IPCB(skb)->flags |= IPSKB_FORWARDED; mtu = ip_dst_mtu_maybe_forward(&rt->dst, true); if (ip_exceeds_mtu(skb, mtu)) { IP_INC_STATS(net, IPSTATS_MIB_FRAGFAILS); diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c index 03e7f7310423..49714010ac2e 100644 --- a/net/ipv4/ip_output.c +++ b/net/ipv4/ip_output.c @@ -239,11 +239,9 @@ static int ip_finish_output_gso(struct net *net, struct sock *sk, struct sk_buff *segs; int ret = 0; - /* common case: fragmentation of segments is not allowed, - * or seglen is <= mtu + /* common case: seglen is <= mtu */ - if (((IPCB(skb)->flags & IPSKB_FRAG_SEGS) == 0) || - skb_gso_validate_mtu(skb, mtu)) + if (skb_gso_validate_mtu(skb, mtu)) return ip_finish_output2(net, sk, skb); /* Slowpath - GSO segment length is exceeding the dst MTU. diff --git a/net/ipv4/ip_tunnel_core.c b/net/ipv4/ip_tunnel_core.c index 777bc1883870..fed3d29f9eb3 100644 --- a/net/ipv4/ip_tunnel_core.c +++ b/net/ipv4/ip_tunnel_core.c @@ -63,7 +63,6 @@ void iptunnel_xmit(struct sock *sk, struct rtable *rt, struct sk_buff *skb, int pkt_len = skb->len - skb_inner_network_offset(skb); struct net *net = dev_net(rt->dst.dev); struct net_device *dev = skb->dev; - int skb_iif = skb->skb_iif; struct iphdr *iph; int err; @@ -73,16 +72,6 @@ void iptunnel_xmit(struct sock *sk, struct rtable *rt, struct sk_buff *skb, skb_dst_set(skb, &rt->dst); memset(IPCB(skb), 0, sizeof(*IPCB(skb))); - if (skb_iif && !(df & htons(IP_DF))) { - /* Arrived from an ingress interface, got encapsulated, with - * fragmentation of encapulating frames allowed. - * If skb is gso, the resulting encapsulated network segments - * may exceed dst mtu. - * Allow IP Fragmentation of segments. - */ - IPCB(skb)->flags |= IPSKB_FRAG_SEGS; - } - /* Push down and install the IP header. */ skb_push(skb, sizeof(struct iphdr)); skb_reset_network_header(skb); diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c index 5f006e13de56..27089f5ebbb1 100644 --- a/net/ipv4/ipmr.c +++ b/net/ipv4/ipmr.c @@ -1749,7 +1749,7 @@ static void ipmr_queue_xmit(struct net *net, struct mr_table *mrt, vif->dev->stats.tx_bytes += skb->len; } - IPCB(skb)->flags |= IPSKB_FORWARDED | IPSKB_FRAG_SEGS; + IPCB(skb)->flags |= IPSKB_FORWARDED; /* RFC1584 teaches, that DVMRP/PIM router must deliver packets locally * not only before forwarding, but after forwarding on all output From 79d8665b9545e128637c51cf7febde9c493b6481 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 2 Nov 2016 14:41:50 -0700 Subject: [PATCH 315/792] tcp: fix return value for partial writes After my commit, tcp_sendmsg() might restart its loop after processing socket backlog. If sk_err is set, we blindly return an error, even though we copied data to user space before. We should instead return number of bytes that could be copied, otherwise user space might resend data and corrupt the stream. This might happen if another thread is using recvmsg(MSG_ERRQUEUE) to process timestamps. Issue was diagnosed by Soheil and Willem, big kudos to them ! Fixes: d41a69f1d390f ("tcp: make tcp_sendmsg() aware of socket backlog") Signed-off-by: Eric Dumazet Cc: Willem de Bruijn Cc: Soheil Hassas Yeganeh Cc: Yuchung Cheng Cc: Neal Cardwell Tested-by: Soheil Hassas Yeganeh Signed-off-by: David S. Miller --- net/ipv4/tcp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 18238ef8135a..814af89c1bd3 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -1164,7 +1164,7 @@ restart: err = -EPIPE; if (sk->sk_err || (sk->sk_shutdown & SEND_SHUTDOWN)) - goto out_err; + goto do_error; sg = !!(sk->sk_route_caps & NETIF_F_SG); From c3f24cfb3e508c70c26ee8569d537c8ca67a36c6 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 2 Nov 2016 17:14:41 -0700 Subject: [PATCH 316/792] dccp: do not release listeners too soon Andrey Konovalov reported following error while fuzzing with syzkaller : IPv4: Attempt to release alive inet socket ffff880068e98940 kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 1 PID: 3905 Comm: a.out Not tainted 4.9.0-rc3+ #333 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff88006b9e0000 task.stack: ffff880068770000 RIP: 0010:[] [] selinux_socket_sock_rcv_skb+0xff/0x6a0 security/selinux/hooks.c:4639 RSP: 0018:ffff8800687771c8 EFLAGS: 00010202 RAX: ffff88006b9e0000 RBX: 1ffff1000d0eee3f RCX: 1ffff1000d1d312a RDX: 1ffff1000d1d31a6 RSI: dffffc0000000000 RDI: 0000000000000010 RBP: ffff880068777360 R08: 0000000000000000 R09: 0000000000000002 R10: dffffc0000000000 R11: 0000000000000006 R12: ffff880068e98940 R13: 0000000000000002 R14: ffff880068777338 R15: 0000000000000000 FS: 00007f00ff760700(0000) GS:ffff88006cd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020008000 CR3: 000000006a308000 CR4: 00000000000006e0 Stack: ffff8800687771e0 ffffffff812508a5 ffff8800686f3168 0000000000000007 ffff88006ac8cdfc ffff8800665ea500 0000000041b58ab3 ffffffff847b5480 ffffffff819eac60 ffff88006b9e0860 ffff88006b9e0868 ffff88006b9e07f0 Call Trace: [] security_sock_rcv_skb+0x75/0xb0 security/security.c:1317 [] sk_filter_trim_cap+0x67/0x10e0 net/core/filter.c:81 [] __sk_receive_skb+0x30/0xa00 net/core/sock.c:460 [] dccp_v4_rcv+0xdb2/0x1910 net/dccp/ipv4.c:873 [] ip_local_deliver_finish+0x332/0xad0 net/ipv4/ip_input.c:216 [< inline >] NF_HOOK_THRESH ./include/linux/netfilter.h:232 [< inline >] NF_HOOK ./include/linux/netfilter.h:255 [] ip_local_deliver+0x1c2/0x4b0 net/ipv4/ip_input.c:257 [< inline >] dst_input ./include/net/dst.h:507 [] ip_rcv_finish+0x750/0x1c40 net/ipv4/ip_input.c:396 [< inline >] NF_HOOK_THRESH ./include/linux/netfilter.h:232 [< inline >] NF_HOOK ./include/linux/netfilter.h:255 [] ip_rcv+0x96f/0x12f0 net/ipv4/ip_input.c:487 [] __netif_receive_skb_core+0x1897/0x2a50 net/core/dev.c:4213 [] __netif_receive_skb+0x2a/0x170 net/core/dev.c:4251 [] netif_receive_skb_internal+0x1b3/0x390 net/core/dev.c:4279 [] netif_receive_skb+0x48/0x250 net/core/dev.c:4303 [] tun_get_user+0xbd5/0x28a0 drivers/net/tun.c:1308 [] tun_chr_write_iter+0xda/0x190 drivers/net/tun.c:1332 [< inline >] new_sync_write fs/read_write.c:499 [] __vfs_write+0x334/0x570 fs/read_write.c:512 [] vfs_write+0x17b/0x500 fs/read_write.c:560 [< inline >] SYSC_write fs/read_write.c:607 [] SyS_write+0xd4/0x1a0 fs/read_write.c:599 [] entry_SYSCALL_64_fastpath+0x1f/0xc2 It turns out DCCP calls __sk_receive_skb(), and this broke when lookups no longer took a reference on listeners. Fix this issue by adding a @refcounted parameter to __sk_receive_skb(), so that sock_put() is used only when needed. Fixes: 3b24d854cb35 ("tcp/dccp: do not touch listener sk_refcnt under synflood") Signed-off-by: Eric Dumazet Reported-by: Andrey Konovalov Tested-by: Andrey Konovalov Signed-off-by: David S. Miller --- include/net/sock.h | 4 ++-- net/core/sock.c | 5 +++-- net/dccp/ipv4.c | 2 +- net/dccp/ipv6.c | 3 ++- 4 files changed, 8 insertions(+), 6 deletions(-) diff --git a/include/net/sock.h b/include/net/sock.h index 73c6b008f1b7..92b269709b9a 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -1596,11 +1596,11 @@ static inline void sock_put(struct sock *sk) void sock_gen_put(struct sock *sk); int __sk_receive_skb(struct sock *sk, struct sk_buff *skb, const int nested, - unsigned int trim_cap); + unsigned int trim_cap, bool refcounted); static inline int sk_receive_skb(struct sock *sk, struct sk_buff *skb, const int nested) { - return __sk_receive_skb(sk, skb, nested, 1); + return __sk_receive_skb(sk, skb, nested, 1, true); } static inline void sk_tx_queue_set(struct sock *sk, int tx_queue) diff --git a/net/core/sock.c b/net/core/sock.c index df171acfe232..5e3ca414357e 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -453,7 +453,7 @@ int sock_queue_rcv_skb(struct sock *sk, struct sk_buff *skb) EXPORT_SYMBOL(sock_queue_rcv_skb); int __sk_receive_skb(struct sock *sk, struct sk_buff *skb, - const int nested, unsigned int trim_cap) + const int nested, unsigned int trim_cap, bool refcounted) { int rc = NET_RX_SUCCESS; @@ -487,7 +487,8 @@ int __sk_receive_skb(struct sock *sk, struct sk_buff *skb, bh_unlock_sock(sk); out: - sock_put(sk); + if (refcounted) + sock_put(sk); return rc; discard_and_relse: kfree_skb(skb); diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c index 345a3aeb8c7e..dff7cfab1da4 100644 --- a/net/dccp/ipv4.c +++ b/net/dccp/ipv4.c @@ -868,7 +868,7 @@ lookup: goto discard_and_relse; nf_reset(skb); - return __sk_receive_skb(sk, skb, 1, dh->dccph_doff * 4); + return __sk_receive_skb(sk, skb, 1, dh->dccph_doff * 4, refcounted); no_dccp_socket: if (!xfrm4_policy_check(NULL, XFRM_POLICY_IN, skb)) diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c index 3828f94b234c..09c4e19aa285 100644 --- a/net/dccp/ipv6.c +++ b/net/dccp/ipv6.c @@ -738,7 +738,8 @@ lookup: if (!xfrm6_policy_check(sk, XFRM_POLICY_IN, skb)) goto discard_and_relse; - return __sk_receive_skb(sk, skb, 1, dh->dccph_doff * 4) ? -1 : 0; + return __sk_receive_skb(sk, skb, 1, dh->dccph_doff * 4, + refcounted) ? -1 : 0; no_dccp_socket: if (!xfrm6_policy_check(NULL, XFRM_POLICY_IN, skb)) From 346da62cc186c4b4b1ac59f87f4482b47a047388 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 2 Nov 2016 18:04:24 -0700 Subject: [PATCH 317/792] dccp: do not send reset to already closed sockets Andrey reported following warning while fuzzing with syzkaller WARNING: CPU: 1 PID: 21072 at net/dccp/proto.c:83 dccp_set_state+0x229/0x290 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 21072 Comm: syz-executor Not tainted 4.9.0-rc1+ #293 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 ffff88003d4c7738 ffffffff81b474f4 0000000000000003 dffffc0000000000 ffffffff844f8b00 ffff88003d4c7804 ffff88003d4c7800 ffffffff8140c06a 0000000041b58ab3 ffffffff8479ab7d ffffffff8140beae ffffffff8140cd00 Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [] dump_stack+0xb3/0x10f lib/dump_stack.c:51 [] panic+0x1bc/0x39d kernel/panic.c:179 [] __warn+0x1cc/0x1f0 kernel/panic.c:542 [] warn_slowpath_null+0x2c/0x40 kernel/panic.c:585 [] dccp_set_state+0x229/0x290 net/dccp/proto.c:83 [] dccp_close+0x612/0xc10 net/dccp/proto.c:1016 [] inet_release+0xef/0x1c0 net/ipv4/af_inet.c:415 [] sock_release+0x8e/0x1d0 net/socket.c:570 [] sock_close+0x16/0x20 net/socket.c:1017 [] __fput+0x29d/0x720 fs/file_table.c:208 [] ____fput+0x15/0x20 fs/file_table.c:244 [] task_work_run+0xf8/0x170 kernel/task_work.c:116 [< inline >] exit_task_work include/linux/task_work.h:21 [] do_exit+0x883/0x2ac0 kernel/exit.c:828 [] do_group_exit+0x10e/0x340 kernel/exit.c:931 [] get_signal+0x634/0x15a0 kernel/signal.c:2307 [] do_signal+0x8d/0x1a30 arch/x86/kernel/signal.c:807 [] exit_to_usermode_loop+0xe5/0x130 arch/x86/entry/common.c:156 [< inline >] prepare_exit_to_usermode arch/x86/entry/common.c:190 [] syscall_return_slowpath+0x1a8/0x1e0 arch/x86/entry/common.c:259 [] entry_SYSCALL_64_fastpath+0xc0/0xc2 Dumping ftrace buffer: (ftrace buffer empty) Kernel Offset: disabled Fix this the same way we did for TCP in commit 565b7b2d2e63 ("tcp: do not send reset to already closed sockets") Signed-off-by: Eric Dumazet Reported-by: Andrey Konovalov Tested-by: Andrey Konovalov Signed-off-by: David S. Miller --- net/dccp/proto.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/dccp/proto.c b/net/dccp/proto.c index 41e65804ddf5..9fe25bf63296 100644 --- a/net/dccp/proto.c +++ b/net/dccp/proto.c @@ -1009,6 +1009,10 @@ void dccp_close(struct sock *sk, long timeout) __kfree_skb(skb); } + /* If socket has been already reset kill it. */ + if (sk->sk_state == DCCP_CLOSED) + goto adjudge_to_death; + if (data_was_unread) { /* Unread data was tossed, send an appropriate Reset Code */ DCCP_WARN("ABORT with %u bytes unread\n", data_was_unread); From 6706a97fec963d6cb3f7fc2978ec1427b4651214 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 2 Nov 2016 19:00:40 -0700 Subject: [PATCH 318/792] dccp: fix out of bound access in dccp_v4_err() dccp_v4_err() does not use pskb_may_pull() and might access garbage. We only need 4 bytes at the beginning of the DCCP header, like TCP, so the 8 bytes pulled in icmp_socket_deliver() are more than enough. This patch might allow to process more ICMP messages, as some routers are still limiting the size of reflected bytes to 28 (RFC 792), instead of extended lengths (RFC 1812 4.3.2.3) Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/dccp/ipv4.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c index dff7cfab1da4..b567c8725aea 100644 --- a/net/dccp/ipv4.c +++ b/net/dccp/ipv4.c @@ -235,7 +235,7 @@ static void dccp_v4_err(struct sk_buff *skb, u32 info) { const struct iphdr *iph = (struct iphdr *)skb->data; const u8 offset = iph->ihl << 2; - const struct dccp_hdr *dh = (struct dccp_hdr *)(skb->data + offset); + const struct dccp_hdr *dh; struct dccp_sock *dp; struct inet_sock *inet; const int type = icmp_hdr(skb)->type; @@ -245,11 +245,13 @@ static void dccp_v4_err(struct sk_buff *skb, u32 info) int err; struct net *net = dev_net(skb->dev); - if (skb->len < offset + sizeof(*dh) || - skb->len < offset + __dccp_basic_hdr_len(dh)) { - __ICMP_INC_STATS(net, ICMP_MIB_INERRORS); - return; - } + /* Only need dccph_dport & dccph_sport which are the first + * 4 bytes in dccp header. + * Our caller (icmp_socket_deliver()) already pulled 8 bytes for us. + */ + BUILD_BUG_ON(offsetofend(struct dccp_hdr, dccph_sport) > 8); + BUILD_BUG_ON(offsetofend(struct dccp_hdr, dccph_dport) > 8); + dh = (struct dccp_hdr *)(skb->data + offset); sk = __inet_lookup_established(net, &dccp_hashinfo, iph->daddr, dh->dccph_dport, From 93636d1f1f162ae89ae4f2a22a83bf4fd960724e Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 2 Nov 2016 20:21:20 -0700 Subject: [PATCH 319/792] netlink: netlink_diag_dump() runs without locks A recent commit removed locking from netlink_diag_dump() but forgot one error case. ===================================== [ BUG: bad unlock balance detected! ] 4.9.0-rc3+ #336 Not tainted ------------------------------------- syz-executor/4018 is trying to release lock ([ 36.220068] nl_table_lock ) at: [] netlink_diag_dump+0x1a3/0x250 net/netlink/diag.c:182 but there are no more locks to release! other info that might help us debug this: 3 locks held by syz-executor/4018: #0: [ 36.220068] ( sock_diag_mutex[ 36.220068] ){+.+.+.} , at: [ 36.220068] [] sock_diag_rcv+0x1b/0x40 #1: [ 36.220068] ( sock_diag_table_mutex[ 36.220068] ){+.+.+.} , at: [ 36.220068] [] sock_diag_rcv_msg+0x140/0x3a0 #2: [ 36.220068] ( nlk->cb_mutex[ 36.220068] ){+.+.+.} , at: [ 36.220068] [] netlink_dump+0x50/0xac0 stack backtrace: CPU: 1 PID: 4018 Comm: syz-executor Not tainted 4.9.0-rc3+ #336 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 ffff8800645df688 ffffffff81b46934 ffffffff84eb3e78 ffff88006ad85800 ffffffff82dc8683 ffffffff84eb3e78 ffff8800645df6b8 ffffffff812043ca dffffc0000000000 ffff88006ad85ff8 ffff88006ad85fd0 00000000ffffffff Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [] dump_stack+0xb3/0x10f lib/dump_stack.c:51 [] print_unlock_imbalance_bug+0x17a/0x1a0 kernel/locking/lockdep.c:3388 [< inline >] __lock_release kernel/locking/lockdep.c:3512 [] lock_release+0x8e8/0xc60 kernel/locking/lockdep.c:3765 [< inline >] __raw_read_unlock ./include/linux/rwlock_api_smp.h:225 [] _raw_read_unlock+0x1a/0x30 kernel/locking/spinlock.c:255 [] netlink_diag_dump+0x1a3/0x250 net/netlink/diag.c:182 [] netlink_dump+0x397/0xac0 net/netlink/af_netlink.c:2110 Fixes: ad202074320c ("netlink: Use rhashtable walk interface in diag dump") Signed-off-by: Eric Dumazet Reported-by: Andrey Konovalov Tested-by: Andrey Konovalov Signed-off-by: David S. Miller --- net/netlink/diag.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/net/netlink/diag.c b/net/netlink/diag.c index b2f0e986a6f4..a5546249fb10 100644 --- a/net/netlink/diag.c +++ b/net/netlink/diag.c @@ -178,11 +178,8 @@ static int netlink_diag_dump(struct sk_buff *skb, struct netlink_callback *cb) } cb->args[1] = i; } else { - if (req->sdiag_protocol >= MAX_LINKS) { - read_unlock(&nl_table_lock); - rcu_read_unlock(); + if (req->sdiag_protocol >= MAX_LINKS) return -ENOENT; - } err = __netlink_diag_dump(skb, cb, req->sdiag_protocol, s_num); } From 1aa9d1a0e7eefcc61696e147d123453fc0016005 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 2 Nov 2016 20:30:48 -0700 Subject: [PATCH 320/792] ipv6: dccp: fix out of bound access in dccp_v6_err() dccp_v6_err() does not use pskb_may_pull() and might access garbage. We only need 4 bytes at the beginning of the DCCP header, like TCP, so the 8 bytes pulled in icmpv6_notify() are more than enough. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/dccp/ipv6.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c index 09c4e19aa285..b2a43af967e5 100644 --- a/net/dccp/ipv6.c +++ b/net/dccp/ipv6.c @@ -70,7 +70,7 @@ static void dccp_v6_err(struct sk_buff *skb, struct inet6_skb_parm *opt, u8 type, u8 code, int offset, __be32 info) { const struct ipv6hdr *hdr = (const struct ipv6hdr *)skb->data; - const struct dccp_hdr *dh = (struct dccp_hdr *)(skb->data + offset); + const struct dccp_hdr *dh; struct dccp_sock *dp; struct ipv6_pinfo *np; struct sock *sk; @@ -78,12 +78,13 @@ static void dccp_v6_err(struct sk_buff *skb, struct inet6_skb_parm *opt, __u64 seq; struct net *net = dev_net(skb->dev); - if (skb->len < offset + sizeof(*dh) || - skb->len < offset + __dccp_basic_hdr_len(dh)) { - __ICMP6_INC_STATS(net, __in6_dev_get(skb->dev), - ICMP6_MIB_INERRORS); - return; - } + /* Only need dccph_dport & dccph_sport which are the first + * 4 bytes in dccp header. + * Our caller (icmpv6_notify()) already pulled 8 bytes for us. + */ + BUILD_BUG_ON(offsetofend(struct dccp_hdr, dccph_sport) > 8); + BUILD_BUG_ON(offsetofend(struct dccp_hdr, dccph_dport) > 8); + dh = (struct dccp_hdr *)(skb->data + offset); sk = __inet6_lookup_established(net, &dccp_hashinfo, &hdr->daddr, dh->dccph_dport, From 29ab5a3b94c87382da06db88e96119911d557293 Mon Sep 17 00:00:00 2001 From: "Guilherme G. Piccoli" Date: Thu, 3 Nov 2016 08:16:20 -0200 Subject: [PATCH 321/792] ehea: fix operation state report Currently the ehea driver is missing a call to netif_carrier_off() before the interface bring-up; this is necessary in order to initialize the __LINK_STATE_NOCARRIER bit in the net_device state field. Otherwise, we observe state UNKNOWN on "ip address" command output. This patch adds a call to netif_carrier_off() on ehea's net device open callback. Reported-by: Xiong Zhou Reference-ID: IBM bz #137702, Red Hat bz #1089134 Signed-off-by: Guilherme G. Piccoli Signed-off-by: Douglas Miller Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ehea/ehea_main.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/ibm/ehea/ehea_main.c b/drivers/net/ethernet/ibm/ehea/ehea_main.c index 54efa9a5167b..bd719e25dd76 100644 --- a/drivers/net/ethernet/ibm/ehea/ehea_main.c +++ b/drivers/net/ethernet/ibm/ehea/ehea_main.c @@ -2446,6 +2446,8 @@ static int ehea_open(struct net_device *dev) netif_info(port, ifup, dev, "enabling port\n"); + netif_carrier_off(dev); + ret = ehea_up(dev); if (!ret) { port_napi_enable(port); From 990ff4d84408fc55942ca6644f67e361737b3d8e Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 3 Nov 2016 08:59:46 -0700 Subject: [PATCH 322/792] ipv6: dccp: add missing bind_conflict to dccp_ipv6_mapped While fuzzing kernel with syzkaller, Andrey reported a nasty crash in inet6_bind() caused by DCCP lacking a required method. Fixes: ab1e0a13d7029 ("[SOCK] proto: Add hashinfo member to struct proto") Signed-off-by: Eric Dumazet Reported-by: Andrey Konovalov Tested-by: Andrey Konovalov Cc: Arnaldo Carvalho de Melo Acked-by: Arnaldo Carvalho de Melo Signed-off-by: David S. Miller --- net/dccp/ipv6.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c index b2a43af967e5..715e5d1dc107 100644 --- a/net/dccp/ipv6.c +++ b/net/dccp/ipv6.c @@ -958,6 +958,7 @@ static const struct inet_connection_sock_af_ops dccp_ipv6_mapped = { .getsockopt = ipv6_getsockopt, .addr2sockaddr = inet6_csk_addr2sockaddr, .sockaddr_len = sizeof(struct sockaddr_in6), + .bind_conflict = inet6_csk_bind_conflict, #ifdef CONFIG_COMPAT .compat_setsockopt = compat_ipv6_setsockopt, .compat_getsockopt = compat_ipv6_getsockopt, From 00ffc1ba02d876478c125e4305f9a02d40c6d284 Mon Sep 17 00:00:00 2001 From: WANG Cong Date: Thu, 3 Nov 2016 09:42:35 -0700 Subject: [PATCH 323/792] genetlink: fix a memory leak on error path In __genl_register_family(), when genl_validate_assign_mc_groups() fails, we forget to free the memory we possibly allocate for family->attrbuf. Note, some callers call genl_unregister_family() to clean up on error path, it doesn't work because the family is inserted to the global list in the nearly last step. Cc: Jakub Kicinski Cc: Johannes Berg Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- net/netlink/genetlink.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/netlink/genetlink.c b/net/netlink/genetlink.c index 23cc12639ba7..49c28e8ef01b 100644 --- a/net/netlink/genetlink.c +++ b/net/netlink/genetlink.c @@ -404,7 +404,7 @@ int __genl_register_family(struct genl_family *family) err = genl_validate_assign_mc_groups(family); if (err) - goto errout_locked; + goto errout_free; list_add_tail(&family->family_list, genl_family_chain(family->id)); genl_unlock_all(); @@ -417,6 +417,8 @@ int __genl_register_family(struct genl_family *family) return 0; +errout_free: + kfree(family->attrbuf); errout_locked: genl_unlock_all(); errout: From 243d52126184b072a18fe2130ce0008f8aa3a340 Mon Sep 17 00:00:00 2001 From: WANG Cong Date: Thu, 3 Nov 2016 09:42:36 -0700 Subject: [PATCH 324/792] taskstats: fix the length of cgroupstats_cmd_get_policy cgroupstats_cmd_get_policy is [CGROUPSTATS_CMD_ATTR_MAX+1], taskstats_cmd_get_policy[TASKSTATS_CMD_ATTR_MAX+1], but their family.maxattr is TASKSTATS_CMD_ATTR_MAX. CGROUPSTATS_CMD_ATTR_MAX is less than TASKSTATS_CMD_ATTR_MAX, so we could end up accessing out-of-bound. Change cgroupstats_cmd_get_policy to TASKSTATS_CMD_ATTR_MAX+1, this is safe because the rest are initialized to 0's. Reported-by: Andrey Konovalov Tested-by: Andrey Konovalov Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- kernel/taskstats.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/kernel/taskstats.c b/kernel/taskstats.c index b3f05ee20d18..cbb387a265db 100644 --- a/kernel/taskstats.c +++ b/kernel/taskstats.c @@ -54,7 +54,11 @@ static const struct nla_policy taskstats_cmd_get_policy[TASKSTATS_CMD_ATTR_MAX+1 [TASKSTATS_CMD_ATTR_REGISTER_CPUMASK] = { .type = NLA_STRING }, [TASKSTATS_CMD_ATTR_DEREGISTER_CPUMASK] = { .type = NLA_STRING },}; -static const struct nla_policy cgroupstats_cmd_get_policy[CGROUPSTATS_CMD_ATTR_MAX+1] = { +/* + * We have to use TASKSTATS_CMD_ATTR_MAX here, it is the maxattr in the family. + * Make sure they are always aligned. + */ +static const struct nla_policy cgroupstats_cmd_get_policy[TASKSTATS_CMD_ATTR_MAX+1] = { [CGROUPSTATS_CMD_ATTR_FD] = { .type = NLA_U32 }, }; From 682c1e52215da4a3e89c14aad60bfc0d400b025f Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Sat, 15 Oct 2016 23:03:43 +0100 Subject: [PATCH 325/792] MIPS: CPC: Provide default mips_cpc_default_phys_base to ignore CPC Provide a default implementation of mips_cpc_default_phys_base() which simply returns 0, and adjust mips_cpc_phys_base() to allow for mips_cpc_default_phys_base() returning 0. This allows kernels which include CPC support to be built without platform code & simply ignore the CPC if it wasn't already enabled by the bootloader. This fixes link failures such as the following from generic defconfigs: arch/mips/built-in.o: In function `mips_cpc_phys_base': arch/mips/kernel/mips-cpc.c:47: undefined reference to `mips_cpc_default_phys_base' [ralf@linux-mips.org: changed prototype for coding style compliance.] Signed-off-by: Paul Burton Reported-by: kbuild test robot Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14401/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/mips-cpc.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/arch/mips/kernel/mips-cpc.c b/arch/mips/kernel/mips-cpc.c index 2a45867d3b4f..a4964c334cab 100644 --- a/arch/mips/kernel/mips-cpc.c +++ b/arch/mips/kernel/mips-cpc.c @@ -21,6 +21,11 @@ static DEFINE_PER_CPU_ALIGNED(spinlock_t, cpc_core_lock); static DEFINE_PER_CPU_ALIGNED(unsigned long, cpc_core_lock_flags); +phys_addr_t __weak mips_cpc_default_phys_base(void) +{ + return 0; +} + /** * mips_cpc_phys_base - retrieve the physical base address of the CPC * @@ -43,8 +48,12 @@ static phys_addr_t mips_cpc_phys_base(void) if (cpc_base & CM_GCR_CPC_BASE_CPCEN_MSK) return cpc_base & CM_GCR_CPC_BASE_CPCBASE_MSK; - /* Otherwise, give it the default address & enable it */ + /* Otherwise, use the default address */ cpc_base = mips_cpc_default_phys_base(); + if (!cpc_base) + return cpc_base; + + /* Enable the CPC, mapped at the default address */ write_gcr_cpc_base(cpc_base | CM_GCR_CPC_BASE_CPCEN_MSK); return cpc_base; } From 93032e31a5f12df847639db3ad0b7f300bf44b7b Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Fri, 14 Oct 2016 10:17:32 +0100 Subject: [PATCH 326/792] MIPS: Malta: Fixup reboot Commit 10b6ea0959de ("MIPS: Malta: Use syscon-reboot driver to reboot") converted the Malta board to use the generic syscon-reboot driver to handle reboots, but incorrectly used the value 0x4d rather than 0x42 as the magic to write to the reboot register. I also incorrectly believed that syscon/regmap would default to native endianness, but this isn't the case. Force this by specifying with a native-endian property in the devicetree. Signed-off-by: Paul Burton Fixes: 10b6ea0959de ("MIPS: Malta: Use syscon-reboot driver to reboot") Reported-by: Guenter Roeck Cc: linux-mips@linux-mips.org Tested-by: Guenter Roeck Tested-by: Maciej W. Rozycki Patchwork: https://patchwork.linux-mips.org/patch/14396/ Signed-off-by: Ralf Baechle --- arch/mips/boot/dts/mti/malta.dts | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/mips/boot/dts/mti/malta.dts b/arch/mips/boot/dts/mti/malta.dts index f604a272d91d..ffe3a1508e72 100644 --- a/arch/mips/boot/dts/mti/malta.dts +++ b/arch/mips/boot/dts/mti/malta.dts @@ -84,12 +84,13 @@ fpga_regs: system-controller@1f000000 { compatible = "mti,malta-fpga", "syscon", "simple-mfd"; reg = <0x1f000000 0x1000>; + native-endian; reboot { compatible = "syscon-reboot"; regmap = <&fpga_regs>; offset = <0x500>; - mask = <0x4d>; + mask = <0x42>; }; }; From 4736697963385e6257ee8e260e97347e858cd962 Mon Sep 17 00:00:00 2001 From: Matt Redfearn Date: Mon, 17 Oct 2016 17:21:46 +0100 Subject: [PATCH 327/792] MIPS: KASLR: Fix handling of NULL FDT If platform code returns a NULL pointer to the FDT, initial_boot_params will not get set to a valid pointer and attempting to find the /chosen node in it will cause a NULL pointer dereference and the kernel to crash immediately on startup - with no output to the console. Fix this by checking that initial_boot_params is valid before using it. Fixes: 405bc8fd12f5 ("MIPS: Kernel: Implement KASLR using CONFIG_RELOCATABLE") Cc: stable@vger.kernel.org # 4.7+ Signed-off-by: Matt Redfearn Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14414/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/relocate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/kernel/relocate.c b/arch/mips/kernel/relocate.c index ca1cc30c0891..1958910b75c0 100644 --- a/arch/mips/kernel/relocate.c +++ b/arch/mips/kernel/relocate.c @@ -200,7 +200,7 @@ static inline __init unsigned long get_random_boot(void) #if defined(CONFIG_USE_OF) /* Get any additional entropy passed in device tree */ - { + if (initial_boot_params) { int node, len; u64 *prop; From 9a59061cfd7ac00f21111d2e8aa7f4ab11d27f6c Mon Sep 17 00:00:00 2001 From: Matt Redfearn Date: Mon, 17 Oct 2016 17:25:24 +0100 Subject: [PATCH 328/792] MIPS: generic: Fix KASLR for generic kernel. The KASLR code requires that the plat_get_fdt() function return the address of the device tree, and it must be available early in the boot, before prom_init() is called. Move the code determining the address of the device tree into plat_get_fdt, and call that from prom_init(). The fdt pointer will be set up by plat_get_fdt() called from relocate_kernel initially and once the relocated kernel has started, prom_init() will use it again to determine the address in the relocated image. Fixes: eed0eabd12ef ("MIPS: generic: Introduce generic DT-based board support") Signed-off-by: Matt Redfearn Reviewed-by: James Hogan Reviewed-by: Paul Burton Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14415/ Signed-off-by: Ralf Baechle --- arch/mips/generic/init.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/arch/mips/generic/init.c b/arch/mips/generic/init.c index 0ea73e845440..d493ccbf274a 100644 --- a/arch/mips/generic/init.c +++ b/arch/mips/generic/init.c @@ -29,10 +29,20 @@ static __initdata const struct mips_machine *mach; static __initdata const void *mach_match_data; void __init prom_init(void) +{ + plat_get_fdt(); + BUG_ON(!fdt); +} + +void __init *plat_get_fdt(void) { const struct mips_machine *check_mach; const struct of_device_id *match; + if (fdt) + /* Already set up */ + return (void *)fdt; + if ((fw_arg0 == -2) && !fdt_check_header((void *)fw_arg1)) { /* * We booted using the UHI boot protocol, so we have been @@ -75,12 +85,6 @@ void __init prom_init(void) /* Retrieve the machine's FDT */ fdt = mach->fdt; } - - BUG_ON(!fdt); -} - -void __init *plat_get_fdt(void) -{ return (void *)fdt; } From 818f38c5b7c4482abd71c64ac4d49911fbefaf9e Mon Sep 17 00:00:00 2001 From: Matt Redfearn Date: Mon, 17 Oct 2016 10:09:39 +0100 Subject: [PATCH 329/792] MIPS: Fix build of compressed image Changes introduced to arch/mips/Makefile for the generic kernel resulted in build errors when making a compressed image if platform-y has multiple values, like this: make[2]: *** No rule to make target `alchemy/'. make[1]: *** [vmlinuz] Error 2 make[1]: Target `_all' not remade because of errors. make: *** [sub-make] Error 2 make: Target `_all' not remade because of errors. Fix this by quoting $(platform-y) as it is passed to the Makefile in arch/mips/boot/compressed/Makefile Reported-by: kernelci.org bot Link: https://storage.kernelci.org/next/next-20161017/mips-gpr_defconfig/build.log Signed-off-by: Matt Redfearn Reviewed-by: Paul Burton Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14405/ Signed-off-by: Ralf Baechle --- arch/mips/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/Makefile b/arch/mips/Makefile index fbf40d3c8123..1a6bac7b076f 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -263,7 +263,7 @@ KBUILD_CPPFLAGS += -DDATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0) bootvars-y = VMLINUX_LOAD_ADDRESS=$(load-y) \ VMLINUX_ENTRY_ADDRESS=$(entry-y) \ - PLATFORM=$(platform-y) + PLATFORM="$(platform-y)" ifdef CONFIG_32BIT bootvars-y += ADDR_BITS=32 endif From bcf084de5d429c0a321de6e2c508440148da1884 Mon Sep 17 00:00:00 2001 From: Matt Redfearn Date: Wed, 19 Oct 2016 14:33:20 +0100 Subject: [PATCH 330/792] MIPS: traps: Fix output of show_backtrace Since commit 4bcc595ccd80 ("printk: reinstate KERN_CONT for printing continuation lines") the output from show_backtrace on MIPS has been pretty unreadable due to the lack of KERN_CONT markers. Use pr_cont to provide the appropriate markers & restore the expected output. Signed-off-by: Matt Redfearn Cc: Maciej W. Rozycki Cc: James Hogan Cc: Paul Burton Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14429/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/traps.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 1f5fdee1dfc3..6ae5ea752d4c 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -156,7 +156,7 @@ static void show_backtrace(struct task_struct *task, const struct pt_regs *regs) print_ip_sym(pc); pc = unwind_stack(task, &sp, pc, &ra); } while (pc); - printk("\n"); + pr_cont("\n"); } /* From fe4e09e701213213cf2024e2979ea227c2e36c60 Mon Sep 17 00:00:00 2001 From: Matt Redfearn Date: Wed, 19 Oct 2016 14:33:21 +0100 Subject: [PATCH 331/792] MIPS: traps: Fix output of show_stacktrace Since commit 4bcc595ccd80 ("printk: reinstate KERN_CONT for printing continuation lines") the output from show_stacktrace on MIPS has been pretty unreadable due to the lack of KERN_CONT markers. Use pr_cont to provide the appropriate markers & restore the expected output. Also start a new line with printk such that the presence of timing information does not interfere with output. Signed-off-by: Matt Redfearn Cc: Maciej W. Rozycki Cc: James Hogan Cc: Paul Burton Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14430/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/traps.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 6ae5ea752d4c..25ce866b2895 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -174,22 +174,24 @@ static void show_stacktrace(struct task_struct *task, printk("Stack :"); i = 0; while ((unsigned long) sp & (PAGE_SIZE - 1)) { - if (i && ((i % (64 / field)) == 0)) - printk("\n "); + if (i && ((i % (64 / field)) == 0)) { + pr_cont("\n"); + printk(" "); + } if (i > 39) { - printk(" ..."); + pr_cont(" ..."); break; } if (__get_user(stackdata, sp++)) { - printk(" (Bad stack address)"); + pr_cont(" (Bad stack address)"); break; } - printk(" %0*lx", field, stackdata); + pr_cont(" %0*lx", field, stackdata); i++; } - printk("\n"); + pr_cont("\n"); show_backtrace(task, regs); } From 41000c5819ee5aea8c5c3b388e4e21e679c1b95c Mon Sep 17 00:00:00 2001 From: Matt Redfearn Date: Wed, 19 Oct 2016 14:33:22 +0100 Subject: [PATCH 332/792] MIPS: traps: Fix output of show_code Since commit 4bcc595ccd80 ("printk: reinstate KERN_CONT for printing continuation lines") the output from show_code on MIPS has been pretty unreadable due to the lack of KERN_CONT markers. Use pr_cont to provide the appropriate markers & restore the expected output. Signed-off-by: Matt Redfearn Cc: Maciej W. Rozycki Cc: James Hogan Cc: Paul Burton Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14431/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/traps.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 25ce866b2895..273b4a419f76 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -231,18 +231,19 @@ static void show_code(unsigned int __user *pc) long i; unsigned short __user *pc16 = NULL; - printk("\nCode:"); + printk("Code:"); if ((unsigned long)pc & 1) pc16 = (unsigned short __user *)((unsigned long)pc & ~1); for(i = -3 ; i < 6 ; i++) { unsigned int insn; if (pc16 ? __get_user(insn, pc16 + i) : __get_user(insn, pc + i)) { - printk(" (Bad address in epc)\n"); + pr_cont(" (Bad address in epc)\n"); break; } - printk("%c%0*x%c", (i?' ':'<'), pc16 ? 4 : 8, insn, (i?' ':'>')); + pr_cont("%c%0*x%c", (i?' ':'<'), pc16 ? 4 : 8, insn, (i?' ':'>')); } + pr_cont("\n"); } static void __show_regs(const struct pt_regs *regs) From 752f5499823edb0c13c594f739363527178f714d Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Wed, 19 Oct 2016 14:33:23 +0100 Subject: [PATCH 333/792] MIPS: Fix __show_regs() output Since commit 4bcc595ccd80 ("printk: reinstate KERN_CONT for printing continuation lines") the output from __show_regs() on MIPS has been pretty unreadable due to the lack of KERN_CONT markers. Use pr_cont to provide the appropriate markers & restore the expected register output. Signed-off-by: Paul Burton Signed-off-by: Matt Redfearn Cc: Maciej W. Rozycki Cc: James Hogan Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14432/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/traps.c | 42 ++++++++++++++++++++-------------------- 1 file changed, 21 insertions(+), 21 deletions(-) diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 273b4a419f76..b9a910b208f9 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -262,15 +262,15 @@ static void __show_regs(const struct pt_regs *regs) if ((i % 4) == 0) printk("$%2d :", i); if (i == 0) - printk(" %0*lx", field, 0UL); + pr_cont(" %0*lx", field, 0UL); else if (i == 26 || i == 27) - printk(" %*s", field, ""); + pr_cont(" %*s", field, ""); else - printk(" %0*lx", field, regs->regs[i]); + pr_cont(" %0*lx", field, regs->regs[i]); i++; if ((i % 4) == 0) - printk("\n"); + pr_cont("\n"); } #ifdef CONFIG_CPU_HAS_SMARTMIPS @@ -291,46 +291,46 @@ static void __show_regs(const struct pt_regs *regs) if (cpu_has_3kex) { if (regs->cp0_status & ST0_KUO) - printk("KUo "); + pr_cont("KUo "); if (regs->cp0_status & ST0_IEO) - printk("IEo "); + pr_cont("IEo "); if (regs->cp0_status & ST0_KUP) - printk("KUp "); + pr_cont("KUp "); if (regs->cp0_status & ST0_IEP) - printk("IEp "); + pr_cont("IEp "); if (regs->cp0_status & ST0_KUC) - printk("KUc "); + pr_cont("KUc "); if (regs->cp0_status & ST0_IEC) - printk("IEc "); + pr_cont("IEc "); } else if (cpu_has_4kex) { if (regs->cp0_status & ST0_KX) - printk("KX "); + pr_cont("KX "); if (regs->cp0_status & ST0_SX) - printk("SX "); + pr_cont("SX "); if (regs->cp0_status & ST0_UX) - printk("UX "); + pr_cont("UX "); switch (regs->cp0_status & ST0_KSU) { case KSU_USER: - printk("USER "); + pr_cont("USER "); break; case KSU_SUPERVISOR: - printk("SUPERVISOR "); + pr_cont("SUPERVISOR "); break; case KSU_KERNEL: - printk("KERNEL "); + pr_cont("KERNEL "); break; default: - printk("BAD_MODE "); + pr_cont("BAD_MODE "); break; } if (regs->cp0_status & ST0_ERL) - printk("ERL "); + pr_cont("ERL "); if (regs->cp0_status & ST0_EXL) - printk("EXL "); + pr_cont("EXL "); if (regs->cp0_status & ST0_IE) - printk("IE "); + pr_cont("IE "); } - printk("\n"); + pr_cont("\n"); exccode = (cause & CAUSEF_EXCCODE) >> CAUSEB_EXCCODE; printk("Cause : %08x (ExcCode %02x)\n", cause, exccode); From 8a98495c7008d5bdede3d53e05e69ecdc0bc614b Mon Sep 17 00:00:00 2001 From: James Hogan Date: Fri, 21 Oct 2016 20:06:40 +0100 Subject: [PATCH 334/792] MIPS: dump_tlb: Fix printk continuations Since commit 4bcc595ccd80 ("printk: reinstate KERN_CONT for printing continuation lines") the output from TLB dumps on MIPS has been pretty unreadable due to the lack of KERN_CONT markers. Use pr_cont to provide the appropriate markers & restore the expected output. Continuation is also used for the second line of each TLB entry printed in dump_tlb.c even though it has a newline, since it is a continuation of the interpretation of the same TLB entry. For example: [ 46.371884] Index: 0 pgmask=16kb va=77654000 asid=73 gid=00 [ri=0 xi=0 pa=ffc18000 c=5 d=0 v=1 g=0] [ri=0 xi=0 pa=ffc1c000 c=5 d=0 v=1 g=0] [ 46.385380] Index: 12 pgmask=16kb va=004b4000 asid=73 gid=00 [ri=0 xi=0 pa=00000000 c=0 d=0 v=0 g=0] [ri=0 xi=0 pa=ffb00000 c=5 d=1 v=1 g=0] Signed-off-by: James Hogan Cc: Maciej W. Rozycki Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14444/ Signed-off-by: Ralf Baechle --- arch/mips/lib/dump_tlb.c | 44 ++++++++++++++++++------------------ arch/mips/lib/r3k_dump_tlb.c | 18 +++++++-------- 2 files changed, 31 insertions(+), 31 deletions(-) diff --git a/arch/mips/lib/dump_tlb.c b/arch/mips/lib/dump_tlb.c index 0f80b936e75e..6eb50a7137db 100644 --- a/arch/mips/lib/dump_tlb.c +++ b/arch/mips/lib/dump_tlb.c @@ -135,42 +135,42 @@ static void dump_tlb(int first, int last) c0 = (entrylo0 & ENTRYLO_C) >> ENTRYLO_C_SHIFT; c1 = (entrylo1 & ENTRYLO_C) >> ENTRYLO_C_SHIFT; - printk("va=%0*lx asid=%0*lx", - vwidth, (entryhi & ~0x1fffUL), - asidwidth, entryhi & asidmask); + pr_cont("va=%0*lx asid=%0*lx", + vwidth, (entryhi & ~0x1fffUL), + asidwidth, entryhi & asidmask); if (cpu_has_guestid) - printk(" gid=%02lx", - (guestctl1 & MIPS_GCTL1_RID) + pr_cont(" gid=%02lx", + (guestctl1 & MIPS_GCTL1_RID) >> MIPS_GCTL1_RID_SHIFT); /* RI/XI are in awkward places, so mask them off separately */ pa = entrylo0 & ~(MIPS_ENTRYLO_RI | MIPS_ENTRYLO_XI); if (xpa) pa |= (unsigned long long)readx_c0_entrylo0() << 30; pa = (pa << 6) & PAGE_MASK; - printk("\n\t["); + pr_cont("\n\t["); if (cpu_has_rixi) - printk("ri=%d xi=%d ", - (entrylo0 & MIPS_ENTRYLO_RI) ? 1 : 0, - (entrylo0 & MIPS_ENTRYLO_XI) ? 1 : 0); - printk("pa=%0*llx c=%d d=%d v=%d g=%d] [", - pwidth, pa, c0, - (entrylo0 & ENTRYLO_D) ? 1 : 0, - (entrylo0 & ENTRYLO_V) ? 1 : 0, - (entrylo0 & ENTRYLO_G) ? 1 : 0); + pr_cont("ri=%d xi=%d ", + (entrylo0 & MIPS_ENTRYLO_RI) ? 1 : 0, + (entrylo0 & MIPS_ENTRYLO_XI) ? 1 : 0); + pr_cont("pa=%0*llx c=%d d=%d v=%d g=%d] [", + pwidth, pa, c0, + (entrylo0 & ENTRYLO_D) ? 1 : 0, + (entrylo0 & ENTRYLO_V) ? 1 : 0, + (entrylo0 & ENTRYLO_G) ? 1 : 0); /* RI/XI are in awkward places, so mask them off separately */ pa = entrylo1 & ~(MIPS_ENTRYLO_RI | MIPS_ENTRYLO_XI); if (xpa) pa |= (unsigned long long)readx_c0_entrylo1() << 30; pa = (pa << 6) & PAGE_MASK; if (cpu_has_rixi) - printk("ri=%d xi=%d ", - (entrylo1 & MIPS_ENTRYLO_RI) ? 1 : 0, - (entrylo1 & MIPS_ENTRYLO_XI) ? 1 : 0); - printk("pa=%0*llx c=%d d=%d v=%d g=%d]\n", - pwidth, pa, c1, - (entrylo1 & ENTRYLO_D) ? 1 : 0, - (entrylo1 & ENTRYLO_V) ? 1 : 0, - (entrylo1 & ENTRYLO_G) ? 1 : 0); + pr_cont("ri=%d xi=%d ", + (entrylo1 & MIPS_ENTRYLO_RI) ? 1 : 0, + (entrylo1 & MIPS_ENTRYLO_XI) ? 1 : 0); + pr_cont("pa=%0*llx c=%d d=%d v=%d g=%d]\n", + pwidth, pa, c1, + (entrylo1 & ENTRYLO_D) ? 1 : 0, + (entrylo1 & ENTRYLO_V) ? 1 : 0, + (entrylo1 & ENTRYLO_G) ? 1 : 0); } printk("\n"); diff --git a/arch/mips/lib/r3k_dump_tlb.c b/arch/mips/lib/r3k_dump_tlb.c index 744f4a7bc49d..85b4086e553e 100644 --- a/arch/mips/lib/r3k_dump_tlb.c +++ b/arch/mips/lib/r3k_dump_tlb.c @@ -53,15 +53,15 @@ static void dump_tlb(int first, int last) */ printk("Index: %2d ", i); - printk("va=%08lx asid=%08lx" - " [pa=%06lx n=%d d=%d v=%d g=%d]", - entryhi & PAGE_MASK, - entryhi & asid_mask, - entrylo0 & PAGE_MASK, - (entrylo0 & R3K_ENTRYLO_N) ? 1 : 0, - (entrylo0 & R3K_ENTRYLO_D) ? 1 : 0, - (entrylo0 & R3K_ENTRYLO_V) ? 1 : 0, - (entrylo0 & R3K_ENTRYLO_G) ? 1 : 0); + pr_cont("va=%08lx asid=%08lx" + " [pa=%06lx n=%d d=%d v=%d g=%d]", + entryhi & PAGE_MASK, + entryhi & asid_mask, + entrylo0 & PAGE_MASK, + (entrylo0 & R3K_ENTRYLO_N) ? 1 : 0, + (entrylo0 & R3K_ENTRYLO_D) ? 1 : 0, + (entrylo0 & R3K_ENTRYLO_V) ? 1 : 0, + (entrylo0 & R3K_ENTRYLO_G) ? 1 : 0); } } printk("\n"); From c9e5603974573367c4d80964a845237a2297228c Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Fri, 28 Oct 2016 08:20:09 +0100 Subject: [PATCH 335/792] MIPS: ptrace: Also initialize the FP context on individual FCSR writes Complement commit ac9ad83bc318 ("MIPS: prevent FP context set via ptrace being discarded") and also initialize the FP context whenever FCSR alone is written with a PTRACE_POKEUSR request addressing FPC_CSR, rather than along with the full FPU register set in the case of the PTRACE_SETFPREGS request. Signed-off-by: Maciej W. Rozycki Cc: Paul Burton Cc: James Hogan Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14459/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/ptrace.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c index 6103b24d1bfc..fd3a9580661a 100644 --- a/arch/mips/kernel/ptrace.c +++ b/arch/mips/kernel/ptrace.c @@ -817,6 +817,7 @@ long arch_ptrace(struct task_struct *child, long request, break; #endif case FPC_CSR: + init_fp_ctx(child); ptrace_setfcr31(child, data); break; case DSP_BASE ... DSP_BASE + 5: { From 5a1aca4469fdccd5b74ba0b4e490173b2b447895 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Fri, 28 Oct 2016 08:21:03 +0100 Subject: [PATCH 336/792] MIPS: Fix FCSR Cause bit handling for correct SIGFPE issue Sanitize FCSR Cause bit handling, following a trail of past attempts: * commit 4249548454f7 ("MIPS: ptrace: Fix FP context restoration FCSR regression"), * commit 443c44032a54 ("MIPS: Always clear FCSR cause bits after emulation"), * commit 64bedffe4968 ("MIPS: Clear [MSA]FPE CSR.Cause after notify_die()"), * commit b1442d39fac2 ("MIPS: Prevent user from setting FCSR cause bits"), * commit b54d2901517d ("Properly handle branch delay slots in connection with signals."). Specifically do not mask these bits out in ptrace(2) processing and send a SIGFPE signal instead whenever a matching pair of an FCSR Cause and Enable bit is seen as execution of an affected context is about to resume. Only then clear Cause bits, and even then do not clear any bits that are set but masked with the respective Enable bits. Adjust Cause bit clearing throughout code likewise, except within the FPU emulator proper where they are set according to IEEE 754 exceptions raised as the operation emulated executed. Do so so that any IEEE 754 exceptions subject to their default handling are recorded like with operations executed by FPU hardware. Signed-off-by: Maciej W. Rozycki Cc: Paul Burton Cc: James Hogan Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14460/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/fpu_emulator.h | 13 +++++ arch/mips/include/asm/switch_to.h | 18 +++++++ arch/mips/kernel/mips-r2-to-r6-emul.c | 10 ++-- arch/mips/kernel/ptrace.c | 7 ++- arch/mips/kernel/traps.c | 72 +++++++++++++++------------ 5 files changed, 78 insertions(+), 42 deletions(-) diff --git a/arch/mips/include/asm/fpu_emulator.h b/arch/mips/include/asm/fpu_emulator.h index 355dc25172e7..c05369e0b8d6 100644 --- a/arch/mips/include/asm/fpu_emulator.h +++ b/arch/mips/include/asm/fpu_emulator.h @@ -63,6 +63,8 @@ do { \ extern int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx, int has_fpu, void *__user *fault_addr); +void force_fcr31_sig(unsigned long fcr31, void __user *fault_addr, + struct task_struct *tsk); int process_fpemu_return(int sig, void __user *fault_addr, unsigned long fcr31); int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn, @@ -81,4 +83,15 @@ static inline void fpu_emulator_init_fpu(void) set_fpr64(&t->thread.fpu.fpr[i], 0, SIGNALLING_NAN); } +/* + * Mask the FCSR Cause bits according to the Enable bits, observing + * that Unimplemented is always enabled. + */ +static inline unsigned long mask_fcr31_x(unsigned long fcr31) +{ + return fcr31 & (FPU_CSR_UNI_X | + ((fcr31 & FPU_CSR_ALL_E) << + (ffs(FPU_CSR_ALL_X) - ffs(FPU_CSR_ALL_E)))); +} + #endif /* _ASM_FPU_EMULATOR_H */ diff --git a/arch/mips/include/asm/switch_to.h b/arch/mips/include/asm/switch_to.h index ebb5c0f2f90d..c0ae27971e31 100644 --- a/arch/mips/include/asm/switch_to.h +++ b/arch/mips/include/asm/switch_to.h @@ -75,6 +75,22 @@ do { if (cpu_has_rw_llb) { \ } \ } while (0) +/* + * Check FCSR for any unmasked exceptions pending set with `ptrace', + * clear them and send a signal. + */ +#define __sanitize_fcr31(next) \ +do { \ + unsigned long fcr31 = mask_fcr31_x(next->thread.fpu.fcr31); \ + void __user *pc; \ + \ + if (unlikely(fcr31)) { \ + pc = (void __user *)task_pt_regs(next)->cp0_epc; \ + next->thread.fpu.fcr31 &= ~fcr31; \ + force_fcr31_sig(fcr31, pc, next); \ + } \ +} while (0) + /* * For newly created kernel threads switch_to() will return to * ret_from_kernel_thread, newly created user threads to ret_from_fork. @@ -85,6 +101,8 @@ do { if (cpu_has_rw_llb) { \ do { \ __mips_mt_fpaff_switch_to(prev); \ lose_fpu_inatomic(1, prev); \ + if (tsk_used_math(next)) \ + __sanitize_fcr31(next); \ if (cpu_has_dsp) { \ __save_dsp(prev); \ __restore_dsp(next); \ diff --git a/arch/mips/kernel/mips-r2-to-r6-emul.c b/arch/mips/kernel/mips-r2-to-r6-emul.c index 22dedd62818a..bd09853aecdf 100644 --- a/arch/mips/kernel/mips-r2-to-r6-emul.c +++ b/arch/mips/kernel/mips-r2-to-r6-emul.c @@ -899,7 +899,7 @@ static inline int mipsr2_find_op_func(struct pt_regs *regs, u32 inst, * mipsr2_decoder: Decode and emulate a MIPS R2 instruction * @regs: Process register set * @inst: Instruction to decode and emulate - * @fcr31: Floating Point Control and Status Register returned + * @fcr31: Floating Point Control and Status Register Cause bits returned */ int mipsr2_decoder(struct pt_regs *regs, u32 inst, unsigned long *fcr31) { @@ -1172,13 +1172,13 @@ fpu_emul: err = fpu_emulator_cop1Handler(regs, ¤t->thread.fpu, 0, &fault_addr); - *fcr31 = current->thread.fpu.fcr31; /* - * We can't allow the emulated instruction to leave any of - * the cause bits set in $fcr31. + * We can't allow the emulated instruction to leave any + * enabled Cause bits set in $fcr31. */ - current->thread.fpu.fcr31 &= ~FPU_CSR_ALL_X; + *fcr31 = res = mask_fcr31_x(current->thread.fpu.fcr31); + current->thread.fpu.fcr31 &= ~res; /* * this is a tricky issue - lose_fpu() uses LL/SC atomics diff --git a/arch/mips/kernel/ptrace.c b/arch/mips/kernel/ptrace.c index fd3a9580661a..a92994d60e91 100644 --- a/arch/mips/kernel/ptrace.c +++ b/arch/mips/kernel/ptrace.c @@ -79,16 +79,15 @@ void ptrace_disable(struct task_struct *child) } /* - * Poke at FCSR according to its mask. Don't set the cause bits as - * this is currently not handled correctly in FP context restoration - * and will cause an oops if a corresponding enable bit is set. + * Poke at FCSR according to its mask. Set the Cause bits even + * if a corresponding Enable bit is set. This will be noticed at + * the time the thread is switched to and SIGFPE thrown accordingly. */ static void ptrace_setfcr31(struct task_struct *child, u32 value) { u32 fcr31; u32 mask; - value &= ~FPU_CSR_ALL_X; fcr31 = child->thread.fpu.fcr31; mask = boot_cpu_data.fpu_msk31; child->thread.fpu.fcr31 = (value & ~mask) | (fcr31 & mask); diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index b9a910b208f9..3905003dfe2b 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -708,6 +708,32 @@ asmlinkage void do_ov(struct pt_regs *regs) exception_exit(prev_state); } +/* + * Send SIGFPE according to FCSR Cause bits, which must have already + * been masked against Enable bits. This is impotant as Inexact can + * happen together with Overflow or Underflow, and `ptrace' can set + * any bits. + */ +void force_fcr31_sig(unsigned long fcr31, void __user *fault_addr, + struct task_struct *tsk) +{ + struct siginfo si = { .si_addr = fault_addr, .si_signo = SIGFPE }; + + if (fcr31 & FPU_CSR_INV_X) + si.si_code = FPE_FLTINV; + else if (fcr31 & FPU_CSR_DIV_X) + si.si_code = FPE_FLTDIV; + else if (fcr31 & FPU_CSR_OVF_X) + si.si_code = FPE_FLTOVF; + else if (fcr31 & FPU_CSR_UDF_X) + si.si_code = FPE_FLTUND; + else if (fcr31 & FPU_CSR_INE_X) + si.si_code = FPE_FLTRES; + else + si.si_code = __SI_FAULT; + force_sig_info(SIGFPE, &si, tsk); +} + int process_fpemu_return(int sig, void __user *fault_addr, unsigned long fcr31) { struct siginfo si = { 0 }; @@ -718,27 +744,7 @@ int process_fpemu_return(int sig, void __user *fault_addr, unsigned long fcr31) return 0; case SIGFPE: - si.si_addr = fault_addr; - si.si_signo = sig; - /* - * Inexact can happen together with Overflow or Underflow. - * Respect the mask to deliver the correct exception. - */ - fcr31 &= (fcr31 & FPU_CSR_ALL_E) << - (ffs(FPU_CSR_ALL_X) - ffs(FPU_CSR_ALL_E)); - if (fcr31 & FPU_CSR_INV_X) - si.si_code = FPE_FLTINV; - else if (fcr31 & FPU_CSR_DIV_X) - si.si_code = FPE_FLTDIV; - else if (fcr31 & FPU_CSR_OVF_X) - si.si_code = FPE_FLTOVF; - else if (fcr31 & FPU_CSR_UDF_X) - si.si_code = FPE_FLTUND; - else if (fcr31 & FPU_CSR_INE_X) - si.si_code = FPE_FLTRES; - else - si.si_code = __SI_FAULT; - force_sig_info(sig, &si, current); + force_fcr31_sig(fcr31, fault_addr, current); return 1; case SIGBUS: @@ -802,13 +808,13 @@ static int simulate_fp(struct pt_regs *regs, unsigned int opcode, /* Run the emulator */ sig = fpu_emulator_cop1Handler(regs, ¤t->thread.fpu, 1, &fault_addr); - fcr31 = current->thread.fpu.fcr31; /* - * We can't allow the emulated instruction to leave any of - * the cause bits set in $fcr31. + * We can't allow the emulated instruction to leave any + * enabled Cause bits set in $fcr31. */ - current->thread.fpu.fcr31 &= ~FPU_CSR_ALL_X; + fcr31 = mask_fcr31_x(current->thread.fpu.fcr31); + current->thread.fpu.fcr31 &= ~fcr31; /* Restore the hardware register state */ own_fpu(1); @@ -834,7 +840,7 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31) goto out; /* Clear FCSR.Cause before enabling interrupts */ - write_32bit_cp1_register(CP1_STATUS, fcr31 & ~FPU_CSR_ALL_X); + write_32bit_cp1_register(CP1_STATUS, fcr31 & ~mask_fcr31_x(fcr31)); local_irq_enable(); die_if_kernel("FP exception in kernel code", regs); @@ -856,13 +862,13 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31) /* Run the emulator */ sig = fpu_emulator_cop1Handler(regs, ¤t->thread.fpu, 1, &fault_addr); - fcr31 = current->thread.fpu.fcr31; /* - * We can't allow the emulated instruction to leave any of - * the cause bits set in $fcr31. + * We can't allow the emulated instruction to leave any + * enabled Cause bits set in $fcr31. */ - current->thread.fpu.fcr31 &= ~FPU_CSR_ALL_X; + fcr31 = mask_fcr31_x(current->thread.fpu.fcr31); + current->thread.fpu.fcr31 &= ~fcr31; /* Restore the hardware register state */ own_fpu(1); /* Using the FPU again. */ @@ -1427,13 +1433,13 @@ asmlinkage void do_cpu(struct pt_regs *regs) sig = fpu_emulator_cop1Handler(regs, ¤t->thread.fpu, 0, &fault_addr); - fcr31 = current->thread.fpu.fcr31; /* * We can't allow the emulated instruction to leave - * any of the cause bits set in $fcr31. + * any enabled Cause bits set in $fcr31. */ - current->thread.fpu.fcr31 &= ~FPU_CSR_ALL_X; + fcr31 = mask_fcr31_x(current->thread.fpu.fcr31); + current->thread.fpu.fcr31 &= ~fcr31; /* Send a signal if required. */ if (!process_fpemu_return(sig, fault_addr, fcr31) && !err) From 35938a00ba86ae7a7404b66b526968ca2b8d3127 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Mon, 31 Oct 2016 16:25:44 +0000 Subject: [PATCH 337/792] MIPS: Fix ISA I FP sigcontext access violation handling Complement commit 0ae8dceaebe3 ("Merge with 2.3.10.") and use the local `fault' handler to recover from FP sigcontext access violation faults, like corresponding code does in r4k_fpu.S. The `bad_stack' handler is in syscall.c and is not suitable here as we want to propagate the error condition up through the caller rather than killing the thread outright. Signed-off-by: Maciej W. Rozycki Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14474/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/r2300_fpu.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/kernel/r2300_fpu.S b/arch/mips/kernel/r2300_fpu.S index b4ac6374a38f..c4c8c1b65be9 100644 --- a/arch/mips/kernel/r2300_fpu.S +++ b/arch/mips/kernel/r2300_fpu.S @@ -21,7 +21,7 @@ #define EX(a,b) \ 9: a,##b; \ .section __ex_table,"a"; \ - PTR 9b,bad_stack; \ + PTR 9b,fault; \ .previous .set noreorder From 6daaa3266db9cc488612690e42c23b0763e2b49a Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Mon, 31 Oct 2016 16:26:24 +0000 Subject: [PATCH 338/792] MIPS: Remove FIR from ISA I FP signal context Complement commit e50c0a8fa60d ("Support the MIPS32 / MIPS64 DSP ASE.") and remove the Floating Point Implementation Register (FIR) from the FP register set recorded in a signal context with MIPS I processors too, in line with the change applied to r4k_fpu.S. The `sc_fpc_eir' slot is unused according to our current ABI and the FIR register is read-only and always directly accessible from user software. [ralf@linux-mips.org: This is also required because the next commit depends on it.] Signed-off-by: Maciej W. Rozycki Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14475/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/r2300_fpu.S | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/arch/mips/kernel/r2300_fpu.S b/arch/mips/kernel/r2300_fpu.S index c4c8c1b65be9..ce249eae91ce 100644 --- a/arch/mips/kernel/r2300_fpu.S +++ b/arch/mips/kernel/r2300_fpu.S @@ -64,13 +64,9 @@ LEAF(_save_fp_context) EX(swc1 $f29,(SC_FPREGS+232)(a0)) EX(swc1 $f30,(SC_FPREGS+240)(a0)) EX(swc1 $f31,(SC_FPREGS+248)(a0)) - EX(sw t1,(SC_FPC_CSR)(a0)) - cfc1 t0,$0 # implementation/version jr ra + EX(sw t1,(SC_FPC_CSR)(a0)) .set pop - .set nomacro - EX(sw t0,(SC_FPC_EIR)(a0)) - .set macro END(_save_fp_context) /* From 758ef0a939d4c003381d2a97d9fb51b2d6d7e162 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Mon, 31 Oct 2016 16:27:01 +0000 Subject: [PATCH 339/792] MIPS: Fix ISA I/II FP signal context offsets Fix a regression introduced with commit 2db9ca0a3551 ("MIPS: Use struct mips_abi offsets to save FP context") for MIPS I/I FP signal contexts, by converting save/restore code to the updated internal API. Start FGR offsets from 0 rather than SC_FPREGS from $a0 and use $a1 rather than the offset of SC_FPC_CSR from $a0 for the Floating Point Control/Status Register (FCSR). Document the new internal API and adjust assembly code formatting for consistency. Signed-off-by: Maciej W. Rozycki Cc: Paul Burton Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14476/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/r2300_fpu.S | 159 ++++++++++++++++++----------------- arch/mips/kernel/r6000_fpu.S | 89 +++++++++++--------- 2 files changed, 131 insertions(+), 117 deletions(-) diff --git a/arch/mips/kernel/r2300_fpu.S b/arch/mips/kernel/r2300_fpu.S index ce249eae91ce..70ca63752cfa 100644 --- a/arch/mips/kernel/r2300_fpu.S +++ b/arch/mips/kernel/r2300_fpu.S @@ -26,97 +26,104 @@ .set noreorder .set mips1 - /* Save floating point context */ + +/** + * _save_fp_context() - save FP context from the FPU + * @a0 - pointer to fpregs field of sigcontext + * @a1 - pointer to fpc_csr field of sigcontext + * + * Save FP context, including the 32 FP data registers and the FP + * control & status register, from the FPU to signal context. + */ LEAF(_save_fp_context) .set push SET_HARDFLOAT li v0, 0 # assume success - cfc1 t1,fcr31 - EX(swc1 $f0,(SC_FPREGS+0)(a0)) - EX(swc1 $f1,(SC_FPREGS+8)(a0)) - EX(swc1 $f2,(SC_FPREGS+16)(a0)) - EX(swc1 $f3,(SC_FPREGS+24)(a0)) - EX(swc1 $f4,(SC_FPREGS+32)(a0)) - EX(swc1 $f5,(SC_FPREGS+40)(a0)) - EX(swc1 $f6,(SC_FPREGS+48)(a0)) - EX(swc1 $f7,(SC_FPREGS+56)(a0)) - EX(swc1 $f8,(SC_FPREGS+64)(a0)) - EX(swc1 $f9,(SC_FPREGS+72)(a0)) - EX(swc1 $f10,(SC_FPREGS+80)(a0)) - EX(swc1 $f11,(SC_FPREGS+88)(a0)) - EX(swc1 $f12,(SC_FPREGS+96)(a0)) - EX(swc1 $f13,(SC_FPREGS+104)(a0)) - EX(swc1 $f14,(SC_FPREGS+112)(a0)) - EX(swc1 $f15,(SC_FPREGS+120)(a0)) - EX(swc1 $f16,(SC_FPREGS+128)(a0)) - EX(swc1 $f17,(SC_FPREGS+136)(a0)) - EX(swc1 $f18,(SC_FPREGS+144)(a0)) - EX(swc1 $f19,(SC_FPREGS+152)(a0)) - EX(swc1 $f20,(SC_FPREGS+160)(a0)) - EX(swc1 $f21,(SC_FPREGS+168)(a0)) - EX(swc1 $f22,(SC_FPREGS+176)(a0)) - EX(swc1 $f23,(SC_FPREGS+184)(a0)) - EX(swc1 $f24,(SC_FPREGS+192)(a0)) - EX(swc1 $f25,(SC_FPREGS+200)(a0)) - EX(swc1 $f26,(SC_FPREGS+208)(a0)) - EX(swc1 $f27,(SC_FPREGS+216)(a0)) - EX(swc1 $f28,(SC_FPREGS+224)(a0)) - EX(swc1 $f29,(SC_FPREGS+232)(a0)) - EX(swc1 $f30,(SC_FPREGS+240)(a0)) - EX(swc1 $f31,(SC_FPREGS+248)(a0)) + cfc1 t1, fcr31 + EX(swc1 $f0, 0(a0)) + EX(swc1 $f1, 8(a0)) + EX(swc1 $f2, 16(a0)) + EX(swc1 $f3, 24(a0)) + EX(swc1 $f4, 32(a0)) + EX(swc1 $f5, 40(a0)) + EX(swc1 $f6, 48(a0)) + EX(swc1 $f7, 56(a0)) + EX(swc1 $f8, 64(a0)) + EX(swc1 $f9, 72(a0)) + EX(swc1 $f10, 80(a0)) + EX(swc1 $f11, 88(a0)) + EX(swc1 $f12, 96(a0)) + EX(swc1 $f13, 104(a0)) + EX(swc1 $f14, 112(a0)) + EX(swc1 $f15, 120(a0)) + EX(swc1 $f16, 128(a0)) + EX(swc1 $f17, 136(a0)) + EX(swc1 $f18, 144(a0)) + EX(swc1 $f19, 152(a0)) + EX(swc1 $f20, 160(a0)) + EX(swc1 $f21, 168(a0)) + EX(swc1 $f22, 176(a0)) + EX(swc1 $f23, 184(a0)) + EX(swc1 $f24, 192(a0)) + EX(swc1 $f25, 200(a0)) + EX(swc1 $f26, 208(a0)) + EX(swc1 $f27, 216(a0)) + EX(swc1 $f28, 224(a0)) + EX(swc1 $f29, 232(a0)) + EX(swc1 $f30, 240(a0)) + EX(swc1 $f31, 248(a0)) jr ra - EX(sw t1,(SC_FPC_CSR)(a0)) + EX(sw t1, (a1)) .set pop END(_save_fp_context) -/* - * Restore FPU state: - * - fp gp registers - * - cp1 status/control register +/** + * _restore_fp_context() - restore FP context to the FPU + * @a0 - pointer to fpregs field of sigcontext + * @a1 - pointer to fpc_csr field of sigcontext * - * We base the decision which registers to restore from the signal stack - * frame on the current content of c0_status, not on the content of the - * stack frame which might have been changed by the user. + * Restore FP context, including the 32 FP data registers and the FP + * control & status register, from signal context to the FPU. */ LEAF(_restore_fp_context) .set push SET_HARDFLOAT li v0, 0 # assume success - EX(lw t0,(SC_FPC_CSR)(a0)) - EX(lwc1 $f0,(SC_FPREGS+0)(a0)) - EX(lwc1 $f1,(SC_FPREGS+8)(a0)) - EX(lwc1 $f2,(SC_FPREGS+16)(a0)) - EX(lwc1 $f3,(SC_FPREGS+24)(a0)) - EX(lwc1 $f4,(SC_FPREGS+32)(a0)) - EX(lwc1 $f5,(SC_FPREGS+40)(a0)) - EX(lwc1 $f6,(SC_FPREGS+48)(a0)) - EX(lwc1 $f7,(SC_FPREGS+56)(a0)) - EX(lwc1 $f8,(SC_FPREGS+64)(a0)) - EX(lwc1 $f9,(SC_FPREGS+72)(a0)) - EX(lwc1 $f10,(SC_FPREGS+80)(a0)) - EX(lwc1 $f11,(SC_FPREGS+88)(a0)) - EX(lwc1 $f12,(SC_FPREGS+96)(a0)) - EX(lwc1 $f13,(SC_FPREGS+104)(a0)) - EX(lwc1 $f14,(SC_FPREGS+112)(a0)) - EX(lwc1 $f15,(SC_FPREGS+120)(a0)) - EX(lwc1 $f16,(SC_FPREGS+128)(a0)) - EX(lwc1 $f17,(SC_FPREGS+136)(a0)) - EX(lwc1 $f18,(SC_FPREGS+144)(a0)) - EX(lwc1 $f19,(SC_FPREGS+152)(a0)) - EX(lwc1 $f20,(SC_FPREGS+160)(a0)) - EX(lwc1 $f21,(SC_FPREGS+168)(a0)) - EX(lwc1 $f22,(SC_FPREGS+176)(a0)) - EX(lwc1 $f23,(SC_FPREGS+184)(a0)) - EX(lwc1 $f24,(SC_FPREGS+192)(a0)) - EX(lwc1 $f25,(SC_FPREGS+200)(a0)) - EX(lwc1 $f26,(SC_FPREGS+208)(a0)) - EX(lwc1 $f27,(SC_FPREGS+216)(a0)) - EX(lwc1 $f28,(SC_FPREGS+224)(a0)) - EX(lwc1 $f29,(SC_FPREGS+232)(a0)) - EX(lwc1 $f30,(SC_FPREGS+240)(a0)) - EX(lwc1 $f31,(SC_FPREGS+248)(a0)) + EX(lw t0, (a1)) + EX(lwc1 $f0, 0(a0)) + EX(lwc1 $f1, 8(a0)) + EX(lwc1 $f2, 16(a0)) + EX(lwc1 $f3, 24(a0)) + EX(lwc1 $f4, 32(a0)) + EX(lwc1 $f5, 40(a0)) + EX(lwc1 $f6, 48(a0)) + EX(lwc1 $f7, 56(a0)) + EX(lwc1 $f8, 64(a0)) + EX(lwc1 $f9, 72(a0)) + EX(lwc1 $f10, 80(a0)) + EX(lwc1 $f11, 88(a0)) + EX(lwc1 $f12, 96(a0)) + EX(lwc1 $f13, 104(a0)) + EX(lwc1 $f14, 112(a0)) + EX(lwc1 $f15, 120(a0)) + EX(lwc1 $f16, 128(a0)) + EX(lwc1 $f17, 136(a0)) + EX(lwc1 $f18, 144(a0)) + EX(lwc1 $f19, 152(a0)) + EX(lwc1 $f20, 160(a0)) + EX(lwc1 $f21, 168(a0)) + EX(lwc1 $f22, 176(a0)) + EX(lwc1 $f23, 184(a0)) + EX(lwc1 $f24, 192(a0)) + EX(lwc1 $f25, 200(a0)) + EX(lwc1 $f26, 208(a0)) + EX(lwc1 $f27, 216(a0)) + EX(lwc1 $f28, 224(a0)) + EX(lwc1 $f29, 232(a0)) + EX(lwc1 $f30, 240(a0)) + EX(lwc1 $f31, 248(a0)) jr ra - ctc1 t0,fcr31 + ctc1 t0, fcr31 .set pop END(_restore_fp_context) .set reorder diff --git a/arch/mips/kernel/r6000_fpu.S b/arch/mips/kernel/r6000_fpu.S index 47077380c15c..9cc7bfab3419 100644 --- a/arch/mips/kernel/r6000_fpu.S +++ b/arch/mips/kernel/r6000_fpu.S @@ -21,7 +21,14 @@ .set push SET_HARDFLOAT - /* Save floating point context */ +/** + * _save_fp_context() - save FP context from the FPU + * @a0 - pointer to fpregs field of sigcontext + * @a1 - pointer to fpc_csr field of sigcontext + * + * Save FP context, including the 32 FP data registers and the FP + * control & status register, from the FPU to signal context. + */ LEAF(_save_fp_context) mfc0 t0,CP0_STATUS sll t0,t0,2 @@ -30,59 +37,59 @@ cfc1 t1,fcr31 /* Store the 16 double precision registers */ - sdc1 $f0,(SC_FPREGS+0)(a0) - sdc1 $f2,(SC_FPREGS+16)(a0) - sdc1 $f4,(SC_FPREGS+32)(a0) - sdc1 $f6,(SC_FPREGS+48)(a0) - sdc1 $f8,(SC_FPREGS+64)(a0) - sdc1 $f10,(SC_FPREGS+80)(a0) - sdc1 $f12,(SC_FPREGS+96)(a0) - sdc1 $f14,(SC_FPREGS+112)(a0) - sdc1 $f16,(SC_FPREGS+128)(a0) - sdc1 $f18,(SC_FPREGS+144)(a0) - sdc1 $f20,(SC_FPREGS+160)(a0) - sdc1 $f22,(SC_FPREGS+176)(a0) - sdc1 $f24,(SC_FPREGS+192)(a0) - sdc1 $f26,(SC_FPREGS+208)(a0) - sdc1 $f28,(SC_FPREGS+224)(a0) - sdc1 $f30,(SC_FPREGS+240)(a0) + sdc1 $f0,0(a0) + sdc1 $f2,16(a0) + sdc1 $f4,32(a0) + sdc1 $f6,48(a0) + sdc1 $f8,64(a0) + sdc1 $f10,80(a0) + sdc1 $f12,96(a0) + sdc1 $f14,112(a0) + sdc1 $f16,128(a0) + sdc1 $f18,144(a0) + sdc1 $f20,160(a0) + sdc1 $f22,176(a0) + sdc1 $f24,192(a0) + sdc1 $f26,208(a0) + sdc1 $f28,224(a0) + sdc1 $f30,240(a0) jr ra - sw t0,SC_FPC_CSR(a0) + sw t0,(a1) 1: jr ra nop END(_save_fp_context) -/* Restore FPU state: - * - fp gp registers - * - cp1 status/control register +/** + * _restore_fp_context() - restore FP context to the FPU + * @a0 - pointer to fpregs field of sigcontext + * @a1 - pointer to fpc_csr field of sigcontext * - * We base the decision which registers to restore from the signal stack - * frame on the current content of c0_status, not on the content of the - * stack frame which might have been changed by the user. + * Restore FP context, including the 32 FP data registers and the FP + * control & status register, from signal context to the FPU. */ LEAF(_restore_fp_context) mfc0 t0,CP0_STATUS sll t0,t0,2 bgez t0,1f - lw t0,SC_FPC_CSR(a0) + lw t0,(a1) /* Restore the 16 double precision registers */ - ldc1 $f0,(SC_FPREGS+0)(a0) - ldc1 $f2,(SC_FPREGS+16)(a0) - ldc1 $f4,(SC_FPREGS+32)(a0) - ldc1 $f6,(SC_FPREGS+48)(a0) - ldc1 $f8,(SC_FPREGS+64)(a0) - ldc1 $f10,(SC_FPREGS+80)(a0) - ldc1 $f12,(SC_FPREGS+96)(a0) - ldc1 $f14,(SC_FPREGS+112)(a0) - ldc1 $f16,(SC_FPREGS+128)(a0) - ldc1 $f18,(SC_FPREGS+144)(a0) - ldc1 $f20,(SC_FPREGS+160)(a0) - ldc1 $f22,(SC_FPREGS+176)(a0) - ldc1 $f24,(SC_FPREGS+192)(a0) - ldc1 $f26,(SC_FPREGS+208)(a0) - ldc1 $f28,(SC_FPREGS+224)(a0) - ldc1 $f30,(SC_FPREGS+240)(a0) + ldc1 $f0,0(a0) + ldc1 $f2,16(a0) + ldc1 $f4,32(a0) + ldc1 $f6,48(a0) + ldc1 $f8,64(a0) + ldc1 $f10,80(a0) + ldc1 $f12,96(a0) + ldc1 $f14,112(a0) + ldc1 $f16,128(a0) + ldc1 $f18,144(a0) + ldc1 $f20,160(a0) + ldc1 $f22,176(a0) + ldc1 $f24,192(a0) + ldc1 $f26,208(a0) + ldc1 $f28,224(a0) + ldc1 $f30,240(a0) jr ra ctc1 t0,fcr31 1: jr ra From f92722dc4545ebfa0f99a2f986fd88c112a22a42 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Mon, 31 Oct 2016 16:27:40 +0000 Subject: [PATCH 340/792] MIPS: Correct MIPS I FP sigcontext layout Complement commit 80cbfad79096 ("MIPS: Correct MIPS I FP context layout") and correct the way Floating Point General registers are stored in a signal context with MIPS I hardware. Use the S.D and L.D assembly macros to have pairs of SWC1 instructions and pairs of LWC1 instructions produced, respectively, in an arrangement which makes the memory representation of floating-point data passed compatible with that used by hardware SDC1 and LDC1 instructions, where available, regardless of the hardware endianness used. This matches the layout used by r4k_fpu.S, ensuring run-time compatibility for MIPS I software across all o32 hardware platforms. Define an EX2 macro to handle exceptions from both hardware instructions implicitly produced from S.D and L.D assembly macros. Signed-off-by: Maciej W. Rozycki Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14477/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/r2300_fpu.S | 103 +++++++++++++---------------------- 1 file changed, 39 insertions(+), 64 deletions(-) diff --git a/arch/mips/kernel/r2300_fpu.S b/arch/mips/kernel/r2300_fpu.S index 70ca63752cfa..918f2f6d3861 100644 --- a/arch/mips/kernel/r2300_fpu.S +++ b/arch/mips/kernel/r2300_fpu.S @@ -24,6 +24,13 @@ PTR 9b,fault; \ .previous +#define EX2(a,b) \ +9: a,##b; \ + .section __ex_table,"a"; \ + PTR 9b,bad_stack; \ + PTR 9b+4,bad_stack; \ + .previous + .set noreorder .set mips1 @@ -40,38 +47,22 @@ LEAF(_save_fp_context) SET_HARDFLOAT li v0, 0 # assume success cfc1 t1, fcr31 - EX(swc1 $f0, 0(a0)) - EX(swc1 $f1, 8(a0)) - EX(swc1 $f2, 16(a0)) - EX(swc1 $f3, 24(a0)) - EX(swc1 $f4, 32(a0)) - EX(swc1 $f5, 40(a0)) - EX(swc1 $f6, 48(a0)) - EX(swc1 $f7, 56(a0)) - EX(swc1 $f8, 64(a0)) - EX(swc1 $f9, 72(a0)) - EX(swc1 $f10, 80(a0)) - EX(swc1 $f11, 88(a0)) - EX(swc1 $f12, 96(a0)) - EX(swc1 $f13, 104(a0)) - EX(swc1 $f14, 112(a0)) - EX(swc1 $f15, 120(a0)) - EX(swc1 $f16, 128(a0)) - EX(swc1 $f17, 136(a0)) - EX(swc1 $f18, 144(a0)) - EX(swc1 $f19, 152(a0)) - EX(swc1 $f20, 160(a0)) - EX(swc1 $f21, 168(a0)) - EX(swc1 $f22, 176(a0)) - EX(swc1 $f23, 184(a0)) - EX(swc1 $f24, 192(a0)) - EX(swc1 $f25, 200(a0)) - EX(swc1 $f26, 208(a0)) - EX(swc1 $f27, 216(a0)) - EX(swc1 $f28, 224(a0)) - EX(swc1 $f29, 232(a0)) - EX(swc1 $f30, 240(a0)) - EX(swc1 $f31, 248(a0)) + EX2(s.d $f0, 0(a0)) + EX2(s.d $f2, 16(a0)) + EX2(s.d $f4, 32(a0)) + EX2(s.d $f6, 48(a0)) + EX2(s.d $f8, 64(a0)) + EX2(s.d $f10, 80(a0)) + EX2(s.d $f12, 96(a0)) + EX2(s.d $f14, 112(a0)) + EX2(s.d $f16, 128(a0)) + EX2(s.d $f18, 144(a0)) + EX2(s.d $f20, 160(a0)) + EX2(s.d $f22, 176(a0)) + EX2(s.d $f24, 192(a0)) + EX2(s.d $f26, 208(a0)) + EX2(s.d $f28, 224(a0)) + EX2(s.d $f30, 240(a0)) jr ra EX(sw t1, (a1)) .set pop @@ -90,38 +81,22 @@ LEAF(_restore_fp_context) SET_HARDFLOAT li v0, 0 # assume success EX(lw t0, (a1)) - EX(lwc1 $f0, 0(a0)) - EX(lwc1 $f1, 8(a0)) - EX(lwc1 $f2, 16(a0)) - EX(lwc1 $f3, 24(a0)) - EX(lwc1 $f4, 32(a0)) - EX(lwc1 $f5, 40(a0)) - EX(lwc1 $f6, 48(a0)) - EX(lwc1 $f7, 56(a0)) - EX(lwc1 $f8, 64(a0)) - EX(lwc1 $f9, 72(a0)) - EX(lwc1 $f10, 80(a0)) - EX(lwc1 $f11, 88(a0)) - EX(lwc1 $f12, 96(a0)) - EX(lwc1 $f13, 104(a0)) - EX(lwc1 $f14, 112(a0)) - EX(lwc1 $f15, 120(a0)) - EX(lwc1 $f16, 128(a0)) - EX(lwc1 $f17, 136(a0)) - EX(lwc1 $f18, 144(a0)) - EX(lwc1 $f19, 152(a0)) - EX(lwc1 $f20, 160(a0)) - EX(lwc1 $f21, 168(a0)) - EX(lwc1 $f22, 176(a0)) - EX(lwc1 $f23, 184(a0)) - EX(lwc1 $f24, 192(a0)) - EX(lwc1 $f25, 200(a0)) - EX(lwc1 $f26, 208(a0)) - EX(lwc1 $f27, 216(a0)) - EX(lwc1 $f28, 224(a0)) - EX(lwc1 $f29, 232(a0)) - EX(lwc1 $f30, 240(a0)) - EX(lwc1 $f31, 248(a0)) + EX2(l.d $f0, 0(a0)) + EX2(l.d $f2, 16(a0)) + EX2(l.d $f4, 32(a0)) + EX2(l.d $f6, 48(a0)) + EX2(l.d $f8, 64(a0)) + EX2(l.d $f10, 80(a0)) + EX2(l.d $f12, 96(a0)) + EX2(l.d $f14, 112(a0)) + EX2(l.d $f16, 128(a0)) + EX2(l.d $f18, 144(a0)) + EX2(l.d $f20, 160(a0)) + EX2(l.d $f22, 176(a0)) + EX2(l.d $f24, 192(a0)) + EX2(l.d $f26, 208(a0)) + EX2(l.d $f28, 224(a0)) + EX2(l.d $f30, 240(a0)) jr ra ctc1 t0, fcr31 .set pop From 16a767ec63167ef70c056795782d6c9c76ba5a5c Mon Sep 17 00:00:00 2001 From: James Hogan Date: Tue, 1 Nov 2016 13:59:09 +0000 Subject: [PATCH 341/792] MIPS: Fix max_low_pfn with disabled highmem When low memory doesn't reach HIGHMEM_START (e.g. up to 256MB at PA=0 is common) and highmem is present above HIGHMEM_START (e.g. on Malta the RAM overlayed by the IO region is aliased at PA=0x90000000), max_low_pfn will be initially calculated very large and then clipped down to HIGHMEM_START. This causes crashes when reading /sys/kernel/mm/page_idle/bitmap (i.e. CONFIG_IDLE_PAGE_TRACKING=y) when highmem is disabled. pfn_valid() will compare against max_mapnr which is derived from max_low_pfn when there is no highend_pfn set up, and will return true for PFNs right up to HIGHMEM_START, even though they are beyond the end of low memory and no page structs will actually exist for these PFNs. This is fixed by skipping high memory regions when initially calculating max_low_pfn if highmem is disabled, so it doesn't get clipped too high. We also clip regions which overlap the highmem boundary when highmem is disabled, so that max_pfn doesn't extend into highmem either. Signed-off-by: James Hogan Cc: Paul Burton Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14490/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/setup.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index 0d57909d9026..f66e5ce505b2 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -368,6 +368,19 @@ static void __init bootmem_init(void) end = PFN_DOWN(boot_mem_map.map[i].addr + boot_mem_map.map[i].size); +#ifndef CONFIG_HIGHMEM + /* + * Skip highmem here so we get an accurate max_low_pfn if low + * memory stops short of high memory. + * If the region overlaps HIGHMEM_START, end is clipped so + * max_pfn excludes the highmem portion. + */ + if (start >= PFN_DOWN(HIGHMEM_START)) + continue; + if (end > PFN_DOWN(HIGHMEM_START)) + end = PFN_DOWN(HIGHMEM_START); +#endif + if (end > max_low_pfn) max_low_pfn = end; if (start < min_low_pfn) From ac95330b96376550ae7a533d1396272d675adfa2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?St=C3=A9phan=20Rafin?= Date: Fri, 4 Nov 2016 00:53:56 +0100 Subject: [PATCH 342/792] clk: sunxi: Fix M factor computation for APB1 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit cfa636886033 ("clk: sunxi: factors: Consolidate get_factors parameters into a struct") introduced a regression for m factor computation in sun4i_get_apb1_factors function. The old code reassigned the "parent_rate" parameter to the targeted divisor value and was buggy for the returned frequency but not for the computed factors. Now, returned frequency is good but m factor is incorrectly computed (its max value 31 is always set resulting in a significantly slower frequency than the requested one...) This patch simply restores the original proper computation for m while keeping the good changes for returned rate. Fixes: cfa636886033 ("clk: sunxi: factors: Consolidate get_factors parameters into a struct") Signed-off-by: Stéphan Rafin Signed-off-by: Maxime Ripard --- drivers/clk/sunxi/clk-sunxi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c index 838b22aa8b67..f2c9274b8bd5 100644 --- a/drivers/clk/sunxi/clk-sunxi.c +++ b/drivers/clk/sunxi/clk-sunxi.c @@ -373,7 +373,7 @@ static void sun4i_get_apb1_factors(struct factors_request *req) else calcp = 3; - calcm = (req->parent_rate >> calcp) - 1; + calcm = (div >> calcp) - 1; req->rate = (req->parent_rate >> calcp) / (calcm + 1); req->m = calcm; From 27915aa61060fd8954a68a86657784705955088a Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Wed, 2 Nov 2016 18:14:43 +0100 Subject: [PATCH 343/792] batman-adv: Revert "fix splat on disabling an interface" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The commit 9799c50372b2 ("batman-adv: fix splat on disabling an interface") fixed a warning but at the same time broke the rtnl function add_slave for devices which were temporarily removed. batadv_softif_slave_add requires soft_iface of and hard_iface to be NULL before it is allowed to be enslaved. But this resetting of soft_iface to NULL in batadv_hardif_disable_interface was removed with the aforementioned commit. Reported-by: Julian Labus Signed-off-by: Sven Eckelmann Acked-by: Linus Lüssing Signed-off-by: Simon Wunderlich --- net/batman-adv/hard-interface.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/batman-adv/hard-interface.c b/net/batman-adv/hard-interface.c index e034afbd1bb0..08ce36147c4c 100644 --- a/net/batman-adv/hard-interface.c +++ b/net/batman-adv/hard-interface.c @@ -652,6 +652,7 @@ void batadv_hardif_disable_interface(struct batadv_hard_iface *hard_iface, batadv_softif_destroy_sysfs(hard_iface->soft_iface); } + hard_iface->soft_iface = NULL; batadv_hardif_put(hard_iface); out: From e13258f38e927b61cdb5f4ad25309450d3b127d1 Mon Sep 17 00:00:00 2001 From: Sven Eckelmann Date: Sat, 29 Oct 2016 09:18:43 +0200 Subject: [PATCH 344/792] batman-adv: Detect missing primaryif during tp_send as error The throughput meter detects different situations as problems for the current test. It stops the test after these and reports it to userspace. This also has to be done when the primary interface disappeared during the test. Fixes: 33a3bb4a3345 ("batman-adv: throughput meter implementation") Reported-by: Joe Perches Signed-off-by: Sven Eckelmann Signed-off-by: Simon Wunderlich --- net/batman-adv/tp_meter.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/batman-adv/tp_meter.c b/net/batman-adv/tp_meter.c index 2333777f919d..8af1611b8ab2 100644 --- a/net/batman-adv/tp_meter.c +++ b/net/batman-adv/tp_meter.c @@ -837,6 +837,7 @@ static int batadv_tp_send(void *arg) primary_if = batadv_primary_if_get_selected(bat_priv); if (unlikely(!primary_if)) { err = BATADV_TP_REASON_DST_UNREACHABLE; + tp_vars->reason = err; goto out; } From 16976085a114ae293c6fa7a463d74600ffcfeb4b Mon Sep 17 00:00:00 2001 From: Archit Taneja Date: Thu, 3 Nov 2016 17:36:18 +0530 Subject: [PATCH 345/792] drm/msm: Fix error handling crashes seen when VRAM allocation fails If VRAM allocation fails, the error handling path crashes in msm_drm_uninit(). The following changes are made to fix this: msm_gem_shrinker_cleanup() is fixed to unregister the shrinker only if it was init-ed in the first place. Before calling kms->funcs->destroy(), we check if kms->funcs is also non-NULL. This is needed for MDP5, since during msm_drm_int(), priv->kms becomes non-NULL early, but msm_kms_init() is called on it only later in mdp5_kms_init(). Signed-off-by: Archit Taneja Signed-off-by: Rob Clark Reviewed-by: Andy Gross --- drivers/gpu/drm/msm/msm_drv.c | 2 +- drivers/gpu/drm/msm/msm_gem_shrinker.c | 7 +++++-- 2 files changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/msm/msm_drv.c b/drivers/gpu/drm/msm/msm_drv.c index fb5c0b0a7594..46568fc80848 100644 --- a/drivers/gpu/drm/msm/msm_drv.c +++ b/drivers/gpu/drm/msm/msm_drv.c @@ -228,7 +228,7 @@ static int msm_drm_uninit(struct device *dev) flush_workqueue(priv->atomic_wq); destroy_workqueue(priv->atomic_wq); - if (kms) + if (kms && kms->funcs) kms->funcs->destroy(kms); if (gpu) { diff --git a/drivers/gpu/drm/msm/msm_gem_shrinker.c b/drivers/gpu/drm/msm/msm_gem_shrinker.c index 283d2841ba58..192b2d3a79cb 100644 --- a/drivers/gpu/drm/msm/msm_gem_shrinker.c +++ b/drivers/gpu/drm/msm/msm_gem_shrinker.c @@ -163,6 +163,9 @@ void msm_gem_shrinker_init(struct drm_device *dev) void msm_gem_shrinker_cleanup(struct drm_device *dev) { struct msm_drm_private *priv = dev->dev_private; - WARN_ON(unregister_vmap_purge_notifier(&priv->vmap_notifier)); - unregister_shrinker(&priv->shrinker); + + if (priv->shrinker.nr_deferred) { + WARN_ON(unregister_vmap_purge_notifier(&priv->vmap_notifier)); + unregister_shrinker(&priv->shrinker); + } } From 94d0e5980d6791b9f98a9b6c586c1f7cb76b2178 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Tue, 18 Oct 2016 18:37:49 +0100 Subject: [PATCH 346/792] arm/arm64: KVM: Perform local TLB invalidation when multiplexing vcpus on a single CPU Architecturally, TLBs are private to the (physical) CPU they're associated with. But when multiple vcpus from the same VM are being multiplexed on the same CPU, the TLBs are not private to the vcpus (and are actually shared across the VMID). Let's consider the following scenario: - vcpu-0 maps PA to VA - vcpu-1 maps PA' to VA If run on the same physical CPU, vcpu-1 can hit TLB entries generated by vcpu-0 accesses, and access the wrong physical page. The solution to this is to keep a per-VM map of which vcpu ran last on each given physical CPU, and invalidate local TLBs when switching to a different vcpu from the same VM. Reviewed-by: Christoffer Dall Signed-off-by: Marc Zyngier --- arch/arm/include/asm/kvm_asm.h | 1 + arch/arm/include/asm/kvm_host.h | 3 +++ arch/arm/include/asm/kvm_hyp.h | 1 + arch/arm/kvm/arm.c | 27 ++++++++++++++++++++++++++- arch/arm/kvm/hyp/tlb.c | 15 +++++++++++++++ arch/arm64/include/asm/kvm_asm.h | 1 + arch/arm64/include/asm/kvm_host.h | 3 +++ arch/arm64/include/asm/kvm_mmu.h | 2 +- arch/arm64/kvm/hyp/tlb.c | 15 +++++++++++++++ 9 files changed, 66 insertions(+), 2 deletions(-) diff --git a/arch/arm/include/asm/kvm_asm.h b/arch/arm/include/asm/kvm_asm.h index d7ea6bcb29bf..8ef05381984b 100644 --- a/arch/arm/include/asm/kvm_asm.h +++ b/arch/arm/include/asm/kvm_asm.h @@ -66,6 +66,7 @@ extern char __kvm_hyp_vector[]; extern void __kvm_flush_vm_context(void); extern void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa); extern void __kvm_tlb_flush_vmid(struct kvm *kvm); +extern void __kvm_tlb_flush_local_vmid(struct kvm_vcpu *vcpu); extern int __kvm_vcpu_run(struct kvm_vcpu *vcpu); diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h index 2d19e02d03fd..d5423ab15ed5 100644 --- a/arch/arm/include/asm/kvm_host.h +++ b/arch/arm/include/asm/kvm_host.h @@ -57,6 +57,9 @@ struct kvm_arch { /* VTTBR value associated with below pgd and vmid */ u64 vttbr; + /* The last vcpu id that ran on each physical CPU */ + int __percpu *last_vcpu_ran; + /* Timer */ struct arch_timer_kvm timer; diff --git a/arch/arm/include/asm/kvm_hyp.h b/arch/arm/include/asm/kvm_hyp.h index 343135ede5fa..58508900c4bb 100644 --- a/arch/arm/include/asm/kvm_hyp.h +++ b/arch/arm/include/asm/kvm_hyp.h @@ -71,6 +71,7 @@ #define ICIALLUIS __ACCESS_CP15(c7, 0, c1, 0) #define ATS1CPR __ACCESS_CP15(c7, 0, c8, 0) #define TLBIALLIS __ACCESS_CP15(c8, 0, c3, 0) +#define TLBIALL __ACCESS_CP15(c8, 0, c7, 0) #define TLBIALLNSNHIS __ACCESS_CP15(c8, 4, c3, 4) #define PRRR __ACCESS_CP15(c10, 0, c2, 0) #define NMRR __ACCESS_CP15(c10, 0, c2, 1) diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index 08bb84f2ad58..19b5f5c1c0ff 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c @@ -114,11 +114,18 @@ void kvm_arch_check_processor_compat(void *rtn) */ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type) { - int ret = 0; + int ret, cpu; if (type) return -EINVAL; + kvm->arch.last_vcpu_ran = alloc_percpu(typeof(*kvm->arch.last_vcpu_ran)); + if (!kvm->arch.last_vcpu_ran) + return -ENOMEM; + + for_each_possible_cpu(cpu) + *per_cpu_ptr(kvm->arch.last_vcpu_ran, cpu) = -1; + ret = kvm_alloc_stage2_pgd(kvm); if (ret) goto out_fail_alloc; @@ -141,6 +148,8 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type) out_free_stage2_pgd: kvm_free_stage2_pgd(kvm); out_fail_alloc: + free_percpu(kvm->arch.last_vcpu_ran); + kvm->arch.last_vcpu_ran = NULL; return ret; } @@ -168,6 +177,9 @@ void kvm_arch_destroy_vm(struct kvm *kvm) { int i; + free_percpu(kvm->arch.last_vcpu_ran); + kvm->arch.last_vcpu_ran = NULL; + for (i = 0; i < KVM_MAX_VCPUS; ++i) { if (kvm->vcpus[i]) { kvm_arch_vcpu_free(kvm->vcpus[i]); @@ -312,6 +324,19 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu) void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu) { + int *last_ran; + + last_ran = this_cpu_ptr(vcpu->kvm->arch.last_vcpu_ran); + + /* + * We might get preempted before the vCPU actually runs, but + * over-invalidation doesn't affect correctness. + */ + if (*last_ran != vcpu->vcpu_id) { + kvm_call_hyp(__kvm_tlb_flush_local_vmid, vcpu); + *last_ran = vcpu->vcpu_id; + } + vcpu->cpu = cpu; vcpu->arch.host_cpu_context = this_cpu_ptr(kvm_host_cpu_state); diff --git a/arch/arm/kvm/hyp/tlb.c b/arch/arm/kvm/hyp/tlb.c index 729652854f90..6d810af2d9fd 100644 --- a/arch/arm/kvm/hyp/tlb.c +++ b/arch/arm/kvm/hyp/tlb.c @@ -55,6 +55,21 @@ void __hyp_text __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa) __kvm_tlb_flush_vmid(kvm); } +void __hyp_text __kvm_tlb_flush_local_vmid(struct kvm_vcpu *vcpu) +{ + struct kvm *kvm = kern_hyp_va(kern_hyp_va(vcpu)->kvm); + + /* Switch to requested VMID */ + write_sysreg(kvm->arch.vttbr, VTTBR); + isb(); + + write_sysreg(0, TLBIALL); + dsb(nsh); + isb(); + + write_sysreg(0, VTTBR); +} + void __hyp_text __kvm_flush_vm_context(void) { write_sysreg(0, TLBIALLNSNHIS); diff --git a/arch/arm64/include/asm/kvm_asm.h b/arch/arm64/include/asm/kvm_asm.h index 18f746551bf6..ec3553eb9349 100644 --- a/arch/arm64/include/asm/kvm_asm.h +++ b/arch/arm64/include/asm/kvm_asm.h @@ -54,6 +54,7 @@ extern char __kvm_hyp_vector[]; extern void __kvm_flush_vm_context(void); extern void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa); extern void __kvm_tlb_flush_vmid(struct kvm *kvm); +extern void __kvm_tlb_flush_local_vmid(struct kvm_vcpu *vcpu); extern int __kvm_vcpu_run(struct kvm_vcpu *vcpu); diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h index bd94e6766759..e5050388e062 100644 --- a/arch/arm64/include/asm/kvm_host.h +++ b/arch/arm64/include/asm/kvm_host.h @@ -62,6 +62,9 @@ struct kvm_arch { /* VTTBR value associated with above pgd and vmid */ u64 vttbr; + /* The last vcpu id that ran on each physical CPU */ + int __percpu *last_vcpu_ran; + /* The maximum number of vCPUs depends on the used GIC model */ int max_vcpus; diff --git a/arch/arm64/include/asm/kvm_mmu.h b/arch/arm64/include/asm/kvm_mmu.h index a79b969c26fc..6f72fe8b0e3e 100644 --- a/arch/arm64/include/asm/kvm_mmu.h +++ b/arch/arm64/include/asm/kvm_mmu.h @@ -128,7 +128,7 @@ static inline unsigned long __kern_hyp_va(unsigned long v) return v; } -#define kern_hyp_va(v) (typeof(v))(__kern_hyp_va((unsigned long)(v))) +#define kern_hyp_va(v) ((typeof(v))(__kern_hyp_va((unsigned long)(v)))) /* * We currently only support a 40bit IPA. diff --git a/arch/arm64/kvm/hyp/tlb.c b/arch/arm64/kvm/hyp/tlb.c index 9cc0ea784ae6..88e2f2b938f0 100644 --- a/arch/arm64/kvm/hyp/tlb.c +++ b/arch/arm64/kvm/hyp/tlb.c @@ -64,6 +64,21 @@ void __hyp_text __kvm_tlb_flush_vmid(struct kvm *kvm) write_sysreg(0, vttbr_el2); } +void __hyp_text __kvm_tlb_flush_local_vmid(struct kvm_vcpu *vcpu) +{ + struct kvm *kvm = kern_hyp_va(kern_hyp_va(vcpu)->kvm); + + /* Switch to requested VMID */ + write_sysreg(kvm->arch.vttbr, vttbr_el2); + isb(); + + asm volatile("tlbi vmalle1" : : ); + dsb(nsh); + isb(); + + write_sysreg(0, vttbr_el2); +} + void __hyp_text __kvm_flush_vm_context(void) { dsb(ishst); From 112b0b8f8f6e18d4695d21457961c0e1b322a1d7 Mon Sep 17 00:00:00 2001 From: Andre Przywara Date: Tue, 1 Nov 2016 18:00:08 +0000 Subject: [PATCH 347/792] KVM: arm/arm64: vgic: Prevent access to invalid SPIs In our VGIC implementation we limit the number of SPIs to a number that the userland application told us. Accordingly we limit the allocation of memory for virtual IRQs to that number. However in our MMIO dispatcher we didn't check if we ever access an IRQ beyond that limit, leading to out-of-bound accesses. Add a test against the number of allocated SPIs in check_region(). Adjust the VGIC_ADDR_TO_INT macro to avoid an actual division, which is not implemented on ARM(32). [maz: cleaned-up original patch] Cc: stable@vger.kernel.org Reviewed-by: Christoffer Dall Signed-off-by: Andre Przywara Signed-off-by: Marc Zyngier --- virt/kvm/arm/vgic/vgic-mmio.c | 41 +++++++++++++++++++++++------------ virt/kvm/arm/vgic/vgic-mmio.h | 14 ++++++------ 2 files changed, 34 insertions(+), 21 deletions(-) diff --git a/virt/kvm/arm/vgic/vgic-mmio.c b/virt/kvm/arm/vgic/vgic-mmio.c index e18b30ddcdce..ebe1b9fa3c4d 100644 --- a/virt/kvm/arm/vgic/vgic-mmio.c +++ b/virt/kvm/arm/vgic/vgic-mmio.c @@ -453,17 +453,33 @@ struct vgic_io_device *kvm_to_vgic_iodev(const struct kvm_io_device *dev) return container_of(dev, struct vgic_io_device, dev); } -static bool check_region(const struct vgic_register_region *region, +static bool check_region(const struct kvm *kvm, + const struct vgic_register_region *region, gpa_t addr, int len) { - if ((region->access_flags & VGIC_ACCESS_8bit) && len == 1) - return true; - if ((region->access_flags & VGIC_ACCESS_32bit) && - len == sizeof(u32) && !(addr & 3)) - return true; - if ((region->access_flags & VGIC_ACCESS_64bit) && - len == sizeof(u64) && !(addr & 7)) - return true; + int flags, nr_irqs = kvm->arch.vgic.nr_spis + VGIC_NR_PRIVATE_IRQS; + + switch (len) { + case sizeof(u8): + flags = VGIC_ACCESS_8bit; + break; + case sizeof(u32): + flags = VGIC_ACCESS_32bit; + break; + case sizeof(u64): + flags = VGIC_ACCESS_64bit; + break; + default: + return false; + } + + if ((region->access_flags & flags) && IS_ALIGNED(addr, len)) { + if (!region->bits_per_irq) + return true; + + /* Do we access a non-allocated IRQ? */ + return VGIC_ADDR_TO_INTID(addr, region->bits_per_irq) < nr_irqs; + } return false; } @@ -477,7 +493,7 @@ static int dispatch_mmio_read(struct kvm_vcpu *vcpu, struct kvm_io_device *dev, region = vgic_find_mmio_region(iodev->regions, iodev->nr_regions, addr - iodev->base_addr); - if (!region || !check_region(region, addr, len)) { + if (!region || !check_region(vcpu->kvm, region, addr, len)) { memset(val, 0, len); return 0; } @@ -510,10 +526,7 @@ static int dispatch_mmio_write(struct kvm_vcpu *vcpu, struct kvm_io_device *dev, region = vgic_find_mmio_region(iodev->regions, iodev->nr_regions, addr - iodev->base_addr); - if (!region) - return 0; - - if (!check_region(region, addr, len)) + if (!region || !check_region(vcpu->kvm, region, addr, len)) return 0; switch (iodev->iodev_type) { diff --git a/virt/kvm/arm/vgic/vgic-mmio.h b/virt/kvm/arm/vgic/vgic-mmio.h index 4c34d39d44a0..84961b4e4422 100644 --- a/virt/kvm/arm/vgic/vgic-mmio.h +++ b/virt/kvm/arm/vgic/vgic-mmio.h @@ -50,15 +50,15 @@ extern struct kvm_io_device_ops kvm_io_gic_ops; #define VGIC_ADDR_IRQ_MASK(bits) (((bits) * 1024 / 8) - 1) /* - * (addr & mask) gives us the byte offset for the INT ID, so we want to - * divide this with 'bytes per irq' to get the INT ID, which is given - * by '(bits) / 8'. But we do this with fixed-point-arithmetic and - * take advantage of the fact that division by a fraction equals - * multiplication with the inverted fraction, and scale up both the - * numerator and denominator with 8 to support at most 64 bits per IRQ: + * (addr & mask) gives us the _byte_ offset for the INT ID. + * We multiply this by 8 the get the _bit_ offset, then divide this by + * the number of bits to learn the actual INT ID. + * But instead of a division (which requires a "long long div" implementation), + * we shift by the binary logarithm of . + * This assumes that is a power of two. */ #define VGIC_ADDR_TO_INTID(addr, bits) (((addr) & VGIC_ADDR_IRQ_MASK(bits)) * \ - 64 / (bits) / 8) + 8 >> ilog2(bits)) /* * Some VGIC registers store per-IRQ information, with a different number From d42c79701a3ee5c38fbbc82f98a140420bd40134 Mon Sep 17 00:00:00 2001 From: Shih-Wei Li Date: Thu, 27 Oct 2016 15:08:13 +0000 Subject: [PATCH 348/792] KVM: arm/arm64: vgic: Kick VCPUs when queueing already pending IRQs In cases like IPI, we could be queueing an interrupt for a VCPU that is already running and is not about to exit, because the VCPU has entered the VM with the interrupt pending and would not trap on EOI'ing that interrupt. This could result to delays in interrupt deliveries or even loss of interrupts. To guarantee prompt interrupt injection, here we have to try to kick the VCPU. Signed-off-by: Shih-Wei Li Reviewed-by: Christoffer Dall Signed-off-by: Marc Zyngier --- virt/kvm/arm/vgic/vgic.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/virt/kvm/arm/vgic/vgic.c b/virt/kvm/arm/vgic/vgic.c index 2893d5ba523a..6440b56ec90e 100644 --- a/virt/kvm/arm/vgic/vgic.c +++ b/virt/kvm/arm/vgic/vgic.c @@ -273,6 +273,18 @@ retry: * no more work for us to do. */ spin_unlock(&irq->irq_lock); + + /* + * We have to kick the VCPU here, because we could be + * queueing an edge-triggered interrupt for which we + * get no EOI maintenance interrupt. In that case, + * while the IRQ is already on the VCPU's AP list, the + * VCPU could have EOI'ed the original interrupt and + * won't see this one until it exits for some other + * reason. + */ + if (vcpu) + kvm_vcpu_kick(vcpu); return false; } From 87dc02551c509703123a60dd7f043d75e92a6aed Mon Sep 17 00:00:00 2001 From: Saeed Mahameed Date: Fri, 4 Nov 2016 01:48:42 +0200 Subject: [PATCH 349/792] net/mlx5e: Fix XDP error path of mlx5e_open_channel() In case of mlx5e_open_rq fails the error handling will jump to label err_close_xdp_sq and will try to close the xdp_sq unconditionally. xdp_sq is valid only in case of XDP use cases, i.e priv->xdp_prog is not null. To fix this in this patch we test xdp_sq validity prior to closing it. In addition we now close the xdp_sq.cq as well. Fixes: b5503b994ed5 ("net/mlx5e: XDP TX forwarding support") Signed-off-by: Saeed Mahameed Reported-by: Jesper Dangaard Brouer Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index f4c687ce4c59..c83619d081d8 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -1512,7 +1512,10 @@ static int mlx5e_open_channel(struct mlx5e_priv *priv, int ix, return 0; err_close_xdp_sq: - mlx5e_close_sq(&c->xdp_sq); + if (priv->xdp_prog) { + mlx5e_close_sq(&c->xdp_sq); + mlx5e_close_cq(&c->xdp_sq.cq); + } err_close_sqs: mlx5e_close_sqs(c); From d7a0ecab380c62ccd9fbe2e08dd720f7a367d6ee Mon Sep 17 00:00:00 2001 From: Saeed Mahameed Date: Fri, 4 Nov 2016 01:48:43 +0200 Subject: [PATCH 350/792] net/mlx5e: Re-arrange XDP SQ/CQ creation In mlx5e_open_channel CQs must be created before napi is enabled. Here we move the XDP CQ creation to satisfy that fact. mlx5e_close_channel is already working according to the right order. Fixes: b5503b994ed5 ("net/mlx5e: XDP TX forwarding support") Signed-off-by: Saeed Mahameed Reported-by: Jesper Dangaard Brouer Signed-off-by: David S. Miller --- .../net/ethernet/mellanox/mlx5/core/en_main.c | 32 +++++++++---------- 1 file changed, 15 insertions(+), 17 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index c83619d081d8..84e8b250e2af 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -1445,6 +1445,7 @@ static int mlx5e_open_channel(struct mlx5e_priv *priv, int ix, c->netdev = priv->netdev; c->mkey_be = cpu_to_be32(priv->mdev->mlx5e_res.mkey.key); c->num_tc = priv->params.num_tc; + c->xdp = !!priv->xdp_prog; if (priv->params.rx_am_enabled) rx_cq_profile = mlx5e_am_get_def_profile(priv->params.rx_cq_period_mode); @@ -1468,6 +1469,12 @@ static int mlx5e_open_channel(struct mlx5e_priv *priv, int ix, if (err) goto err_close_tx_cqs; + /* XDP SQ CQ params are same as normal TXQ sq CQ params */ + err = c->xdp ? mlx5e_open_cq(c, &cparam->tx_cq, &c->xdp_sq.cq, + priv->params.tx_cq_moderation) : 0; + if (err) + goto err_close_rx_cq; + napi_enable(&c->napi); err = mlx5e_open_sq(c, 0, &cparam->icosq, &c->icosq); @@ -1488,21 +1495,10 @@ static int mlx5e_open_channel(struct mlx5e_priv *priv, int ix, } } - if (priv->xdp_prog) { - /* XDP SQ CQ params are same as normal TXQ sq CQ params */ - err = mlx5e_open_cq(c, &cparam->tx_cq, &c->xdp_sq.cq, - priv->params.tx_cq_moderation); - if (err) - goto err_close_sqs; + err = c->xdp ? mlx5e_open_sq(c, 0, &cparam->xdp_sq, &c->xdp_sq) : 0; + if (err) + goto err_close_sqs; - err = mlx5e_open_sq(c, 0, &cparam->xdp_sq, &c->xdp_sq); - if (err) { - mlx5e_close_cq(&c->xdp_sq.cq); - goto err_close_sqs; - } - } - - c->xdp = !!priv->xdp_prog; err = mlx5e_open_rq(c, &cparam->rq, &c->rq); if (err) goto err_close_xdp_sq; @@ -1512,10 +1508,8 @@ static int mlx5e_open_channel(struct mlx5e_priv *priv, int ix, return 0; err_close_xdp_sq: - if (priv->xdp_prog) { + if (c->xdp) mlx5e_close_sq(&c->xdp_sq); - mlx5e_close_cq(&c->xdp_sq.cq); - } err_close_sqs: mlx5e_close_sqs(c); @@ -1525,6 +1519,10 @@ err_close_icosq: err_disable_napi: napi_disable(&c->napi); + if (c->xdp) + mlx5e_close_cq(&c->xdp_sq.cq); + +err_close_rx_cq: mlx5e_close_cq(&c->rq.cq); err_close_tx_cqs: From abd3277287c7743d3999b801c6769e8ad1b381dd Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Fri, 4 Nov 2016 01:48:44 +0200 Subject: [PATCH 351/792] net/mlx5e: Disallow changing name-space for VF representors VF reps should be altogether on the same NS as they were created. Signed-off-by: Or Gerlitz Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c index 7fe6559e4ab3..bf1c09ca73c0 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c @@ -308,7 +308,7 @@ static void mlx5e_build_rep_netdev(struct net_device *netdev) netdev->switchdev_ops = &mlx5e_rep_switchdev_ops; #endif - netdev->features |= NETIF_F_VLAN_CHALLENGED | NETIF_F_HW_TC; + netdev->features |= NETIF_F_VLAN_CHALLENGED | NETIF_F_HW_TC | NETIF_F_NETNS_LOCAL; netdev->hw_features |= NETIF_F_HW_TC; eth_hw_addr_random(netdev); From 358d79a47e5a8db83925241629252cfe64f225f7 Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Fri, 4 Nov 2016 01:48:45 +0200 Subject: [PATCH 352/792] net/mlx5e: Handle matching on vlan priority for offloaded TC rules We ignored the vlan priority in offloaded TC rules matching part, fix that. Fixes: 095b6cfd69ce ('net/mlx5e: Add TC vlan match parsing') Signed-off-by: Or Gerlitz Reported-by: Paul Blakey Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c index ce8c54d18906..6bb21b31cfeb 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c @@ -237,12 +237,15 @@ static int parse_cls_flower(struct mlx5e_priv *priv, struct mlx5_flow_spec *spec skb_flow_dissector_target(f->dissector, FLOW_DISSECTOR_KEY_VLAN, f->mask); - if (mask->vlan_id) { + if (mask->vlan_id || mask->vlan_priority) { MLX5_SET(fte_match_set_lyr_2_4, headers_c, vlan_tag, 1); MLX5_SET(fte_match_set_lyr_2_4, headers_v, vlan_tag, 1); MLX5_SET(fte_match_set_lyr_2_4, headers_c, first_vid, mask->vlan_id); MLX5_SET(fte_match_set_lyr_2_4, headers_v, first_vid, key->vlan_id); + + MLX5_SET(fte_match_set_lyr_2_4, headers_c, first_prio, mask->vlan_priority); + MLX5_SET(fte_match_set_lyr_2_4, headers_v, first_prio, key->vlan_priority); } } From ee39fbc4447d5c42640963b559bf68490cb45308 Mon Sep 17 00:00:00 2001 From: Or Gerlitz Date: Fri, 4 Nov 2016 01:48:46 +0200 Subject: [PATCH 353/792] net/mlx5: E-Switch, Set the actions for offloaded rules properly As for the current generation of the mlx5 HW (CX4/CX4-Lx) per flow vlan push/pop actions are emulated, we must not program them to the firmware. Fixes: f5f82476090f ('net/mlx5: E-Switch, Support VLAN actions in the offloads mode') Signed-off-by: Or Gerlitz Reported-by: Paul Blakey Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c index c55ad8d00c05..d239f5d0ea36 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c @@ -57,7 +57,8 @@ mlx5_eswitch_add_offloaded_rule(struct mlx5_eswitch *esw, if (esw->mode != SRIOV_OFFLOADS) return ERR_PTR(-EOPNOTSUPP); - action = attr->action; + /* per flow vlan pop/push is emulated, don't set that into the firmware */ + action = attr->action & ~(MLX5_FLOW_CONTEXT_ACTION_VLAN_PUSH | MLX5_FLOW_CONTEXT_ACTION_VLAN_POP); if (action & MLX5_FLOW_CONTEXT_ACTION_FWD_DEST) { dest.type = MLX5_FLOW_DESTINATION_TYPE_VPORT; From 0e97a34083a03c931d4e9b34ba7899c29a09dce6 Mon Sep 17 00:00:00 2001 From: Huy Nguyen Date: Fri, 4 Nov 2016 01:48:47 +0200 Subject: [PATCH 354/792] net/mlx5: Fix invalid pointer reference when prof_sel parameter is invalid When prof_sel is invalid, mlx5_core_warn is called but the mlx5_core_dev is not initialized yet. Solution is moving the prof_sel code after dev->pdev assignment Fixes: 2974ab6e8bd8 ('net/mlx5: Improve driver log messages') Signed-off-by: Huy Nguyen Signed-off-by: Saeed Mahameed Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx5/core/main.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c index d5433c49b2b0..3eb931585b3e 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c @@ -1226,6 +1226,9 @@ static int init_one(struct pci_dev *pdev, pci_set_drvdata(pdev, dev); + dev->pdev = pdev; + dev->event = mlx5_core_event; + if (prof_sel < 0 || prof_sel >= ARRAY_SIZE(profile)) { mlx5_core_warn(dev, "selected profile out of range, selecting default (%d)\n", @@ -1233,8 +1236,6 @@ static int init_one(struct pci_dev *pdev, prof_sel = MLX5_DEFAULT_PROF; } dev->profile = &profile[prof_sel]; - dev->pdev = pdev; - dev->event = mlx5_core_event; INIT_LIST_HEAD(&priv->ctx_list); spin_lock_init(&priv->ctx_lock); From 147b36d5b70c083cc76770c47d60b347e8eaf231 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Mon, 31 Oct 2016 21:46:24 +0200 Subject: [PATCH 355/792] i2c: core: fix NULL pointer dereference under race condition Race condition between registering an I2C device driver and deregistering an I2C adapter device which is assumed to manage that I2C device may lead to a NULL pointer dereference due to the uninitialized list head of driver clients. The root cause of the issue is that the I2C bus may know about the registered device driver and thus it is matched by bus_for_each_drv(), but the list of clients is not initialized and commonly it is NULL, because I2C device drivers define struct i2c_driver as static and clients field is expected to be initialized by I2C core: i2c_register_driver() i2c_del_adapter() driver_register() ... bus_add_driver() ... ... bus_for_each_drv(..., __process_removed_adapter) ... i2c_do_del_adapter() ... list_for_each_entry_safe(..., &driver->clients, ...) INIT_LIST_HEAD(&driver->clients); To solve the problem it is sufficient to do clients list head initialization before calling driver_register(). The problem was found while using an I2C device driver with a sluggish registration routine on a bus provided by a physically detachable I2C master controller, but practically the oops may be reproduced under the race between arbitraty I2C device driver registration and managing I2C bus device removal e.g. by unbinding the latter over sysfs: % echo 21a4000.i2c > /sys/bus/platform/drivers/imx-i2c/unbind Unable to handle kernel NULL pointer dereference at virtual address 00000000 Internal error: Oops: 17 [#1] SMP ARM CPU: 2 PID: 533 Comm: sh Not tainted 4.9.0-rc3+ #61 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) task: e5ada400 task.stack: e4936000 PC is at i2c_do_del_adapter+0x20/0xcc LR is at __process_removed_adapter+0x14/0x1c Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 35bd004a DAC: 00000051 Process sh (pid: 533, stack limit = 0xe4936210) Stack: (0xe4937d28 to 0xe4938000) Backtrace: [] (i2c_do_del_adapter) from [] (__process_removed_adapter+0x14/0x1c) [] (__process_removed_adapter) from [] (bus_for_each_drv+0x6c/0xa0) [] (bus_for_each_drv) from [] (i2c_del_adapter+0xbc/0x284) [] (i2c_del_adapter) from [] (i2c_imx_remove+0x44/0x164 [i2c_imx]) [] (i2c_imx_remove [i2c_imx]) from [] (platform_drv_remove+0x2c/0x44) [] (platform_drv_remove) from [] (__device_release_driver+0x90/0x12c) [] (__device_release_driver) from [] (device_release_driver+0x28/0x34) [] (device_release_driver) from [] (unbind_store+0x80/0x104) [] (unbind_store) from [] (drv_attr_store+0x28/0x34) [] (drv_attr_store) from [] (sysfs_kf_write+0x50/0x54) [] (sysfs_kf_write) from [] (kernfs_fop_write+0x100/0x214) [] (kernfs_fop_write) from [] (__vfs_write+0x34/0x120) [] (__vfs_write) from [] (vfs_write+0xa8/0x170) [] (vfs_write) from [] (SyS_write+0x4c/0xa8) [] (SyS_write) from [] (ret_fast_syscall+0x0/0x1c) Signed-off-by: Vladimir Zapolskiy Signed-off-by: Wolfram Sang Cc: stable@kernel.org --- drivers/i2c/i2c-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 1704fc84d647..b432b64e307a 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -2179,6 +2179,7 @@ int i2c_register_driver(struct module *owner, struct i2c_driver *driver) /* add the driver to the list of i2c drivers in the driver core */ driver->driver.owner = owner; driver->driver.bus = &i2c_bus_type; + INIT_LIST_HEAD(&driver->clients); /* When registration returns, the driver core * will have called probe() for all matching-but-unbound devices. @@ -2189,7 +2190,6 @@ int i2c_register_driver(struct module *owner, struct i2c_driver *driver) pr_debug("driver [%s] registered\n", driver->driver.name); - INIT_LIST_HEAD(&driver->clients); /* Walk the adapters that are already present */ i2c_for_each_dev(driver, __process_new_driver); From 416379f9ebded501eda882e6af0a7aafc1866700 Mon Sep 17 00:00:00 2001 From: Niklas Cassel Date: Fri, 14 Oct 2016 23:54:55 +0200 Subject: [PATCH 356/792] PCI: designware: Check for iATU unroll support after initializing host dw_pcie_iatu_unroll_enabled() reads a dbi_base register. Reading any dbi_base register before pp->ops->host_init has been called causes "imprecise external abort" on platforms like ARTPEC-6, where the PCIe module is disabled at boot and first enabled in pp->ops->host_init. Move dw_pcie_iatu_unroll_enabled() to dw_pcie_setup_rc(), since it is after pp->ops->host_init, but before pp->iatu_unroll_enabled is actually used. Fixes: a0601a470537 ("PCI: designware: Add iATU Unroll feature") Tested-by: James Le Cuirot Signed-off-by: Niklas Cassel Signed-off-by: Bjorn Helgaas Acked-by: Joao Pinto Acked-by: Olof Johansson --- drivers/pci/host/pcie-designware.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c index 035f50c03281..bed19994c1e9 100644 --- a/drivers/pci/host/pcie-designware.c +++ b/drivers/pci/host/pcie-designware.c @@ -637,8 +637,6 @@ int dw_pcie_host_init(struct pcie_port *pp) } } - pp->iatu_unroll_enabled = dw_pcie_iatu_unroll_enabled(pp); - if (pp->ops->host_init) pp->ops->host_init(pp); @@ -809,6 +807,11 @@ void dw_pcie_setup_rc(struct pcie_port *pp) { u32 val; + /* get iATU unroll support */ + pp->iatu_unroll_enabled = dw_pcie_iatu_unroll_enabled(pp); + dev_dbg(pp->dev, "iATU unroll: %s\n", + pp->iatu_unroll_enabled ? "enabled" : "disabled"); + /* set the number of lanes */ val = dw_pcie_readl_rc(pp, PCIE_PORT_LINK_CONTROL); val &= ~PORT_LINK_MODE_MASK; From 56211121c0825cd188caad05574fdc518d5cac6f Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Mon, 31 Oct 2016 16:57:32 +0200 Subject: [PATCH 357/792] pinctrl: cherryview: Serialize register access in suspend/resume If async suspend is enabled, the driver may access registers concurrently with another instance which may fail because of the bug in Cherryview GPIO hardware. Prevent this by taking the shared lock while accessing the hardware in suspend and resume hooks. Cc: stable@vger.kernel.org Signed-off-by: Mika Westerberg Signed-off-by: Linus Walleij --- drivers/pinctrl/intel/pinctrl-cherryview.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/pinctrl/intel/pinctrl-cherryview.c b/drivers/pinctrl/intel/pinctrl-cherryview.c index 30389f4ccab4..097d835b3a50 100644 --- a/drivers/pinctrl/intel/pinctrl-cherryview.c +++ b/drivers/pinctrl/intel/pinctrl-cherryview.c @@ -1656,8 +1656,11 @@ static int chv_pinctrl_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct chv_pinctrl *pctrl = platform_get_drvdata(pdev); + unsigned long flags; int i; + raw_spin_lock_irqsave(&chv_lock, flags); + pctrl->saved_intmask = readl(pctrl->regs + CHV_INTMASK); for (i = 0; i < pctrl->community->npins; i++) { @@ -1678,6 +1681,8 @@ static int chv_pinctrl_suspend(struct device *dev) ctx->padctrl1 = readl(reg); } + raw_spin_unlock_irqrestore(&chv_lock, flags); + return 0; } @@ -1685,8 +1690,11 @@ static int chv_pinctrl_resume(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct chv_pinctrl *pctrl = platform_get_drvdata(pdev); + unsigned long flags; int i; + raw_spin_lock_irqsave(&chv_lock, flags); + /* * Mask all interrupts before restoring per-pin configuration * registers because we don't know in which state BIOS left them @@ -1731,6 +1739,8 @@ static int chv_pinctrl_resume(struct device *dev) chv_writel(0xffff, pctrl->regs + CHV_INTSTAT); chv_writel(pctrl->saved_intmask, pctrl->regs + CHV_INTMASK); + raw_spin_unlock_irqrestore(&chv_lock, flags); + return 0; } #endif From d2cdf5dc58f6970e9d9d26e47974c21fe87983f3 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Mon, 31 Oct 2016 16:57:33 +0200 Subject: [PATCH 358/792] pinctrl: cherryview: Prevent possible interrupt storm on resume When the system is suspended to S3 the BIOS might re-initialize certain GPIO pins back to their original state or it may re-program interrupt mask of others. For example Acer TravelMate B116-M had BIOS bug where certain GPIO pin (MF_ISH_GPIO_5) was programmed to trigger on high level, and the pin state was high once the BIOS gave control to the OS on resume. This triggers lots of messages like: irq 117, desc: ffff88017a61e600, depth: 1, count: 0, unhandled: 0 ->handle_irq(): ffffffff8109b613, handle_bad_irq+0x0/0x1e0 ->irq_data.chip(): ffffffffa0020180, chv_pinctrl_exit+0x2d84/0x12 [pinctrl_cherryview] ->action(): (null) IRQ_NOPROBE set We reset the mask back to known state in chv_pinctrl_resume() but that is called only after device interrupts have already been enabled. Now, this particular issue was fixed by upgrading the BIOS to the latest (v1.23) but not everybody upgrades their BIOSes so we fix it up in the driver as well. Prevent the possible interrupt storm by moving suspend and resume hooks to be called at _noirq time instead. Since device interrupts are still disabled we can restore the mask back to known state before interrupt storm happens. Cc: stable@vger.kernel.org Reported-by: Christian Steiner Signed-off-by: Mika Westerberg Signed-off-by: Linus Walleij --- drivers/pinctrl/intel/pinctrl-cherryview.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/pinctrl/intel/pinctrl-cherryview.c b/drivers/pinctrl/intel/pinctrl-cherryview.c index 097d835b3a50..c43b1e9a06af 100644 --- a/drivers/pinctrl/intel/pinctrl-cherryview.c +++ b/drivers/pinctrl/intel/pinctrl-cherryview.c @@ -1652,7 +1652,7 @@ static int chv_pinctrl_probe(struct platform_device *pdev) } #ifdef CONFIG_PM_SLEEP -static int chv_pinctrl_suspend(struct device *dev) +static int chv_pinctrl_suspend_noirq(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct chv_pinctrl *pctrl = platform_get_drvdata(pdev); @@ -1686,7 +1686,7 @@ static int chv_pinctrl_suspend(struct device *dev) return 0; } -static int chv_pinctrl_resume(struct device *dev) +static int chv_pinctrl_resume_noirq(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct chv_pinctrl *pctrl = platform_get_drvdata(pdev); @@ -1746,7 +1746,8 @@ static int chv_pinctrl_resume(struct device *dev) #endif static const struct dev_pm_ops chv_pinctrl_pm_ops = { - SET_LATE_SYSTEM_SLEEP_PM_OPS(chv_pinctrl_suspend, chv_pinctrl_resume) + SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(chv_pinctrl_suspend_noirq, + chv_pinctrl_resume_noirq) }; static const struct acpi_device_id chv_pinctrl_acpi_match[] = { From 3984903a2e3906d3def220e688040ce93368200a Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Thu, 27 Oct 2016 11:27:25 +0530 Subject: [PATCH 359/792] rtc: omap: Fix selecting external osc RTC can be clocked from an external 32KHz oscillator, or from the Peripheral PLL. The RTC has an internal oscillator buffer to support direct operation with a crystal. ---------------------------------------- | Device --------- | | | | | | | RTCSS | | | --------- | | | OSC |<------| RTC | | | | |------>| OSC |--- | | | | -------- | | | | | ----|clk | | | -------- | | | | | | PRCM |--- | | | | -------- -------- | ---------------------------------------- The RTC functional clock is sourced by default from the clock derived from the Peripheral PLL. In order to select source as external osc clk the following changes needs to be done: - Enable the RTC OSC (RTC_OSC_REG[4]OSC32K_GZ = 0) - Enable the clock mux(RTC_OSC_REG[6]K32CLK_EN = 1) - Select the external clock source (RTC_OSC_REG[3]32KCLK_SEL = 1) Fixes: 399cf0f63f6f2 ("rtc: omap: Add external clock enabling support") Signed-off-by: Keerthy Signed-off-by: Lokesh Vutla Signed-off-by: Dave Gerlach Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-omap.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c index b04ea9b5ae67..dddaa60871b9 100644 --- a/drivers/rtc/rtc-omap.c +++ b/drivers/rtc/rtc-omap.c @@ -113,6 +113,7 @@ /* OMAP_RTC_OSC_REG bit fields: */ #define OMAP_RTC_OSC_32KCLK_EN BIT(6) #define OMAP_RTC_OSC_SEL_32KCLK_SRC BIT(3) +#define OMAP_RTC_OSC_OSC32K_GZ_DISABLE BIT(4) /* OMAP_RTC_IRQWAKEEN bit fields: */ #define OMAP_RTC_IRQWAKEEN_ALARM_WAKEEN BIT(1) @@ -786,8 +787,9 @@ static int omap_rtc_probe(struct platform_device *pdev) */ if (rtc->has_ext_clk) { reg = rtc_read(rtc, OMAP_RTC_OSC_REG); - rtc_write(rtc, OMAP_RTC_OSC_REG, - reg | OMAP_RTC_OSC_SEL_32KCLK_SRC); + reg &= ~OMAP_RTC_OSC_OSC32K_GZ_DISABLE; + reg |= OMAP_RTC_OSC_32KCLK_EN | OMAP_RTC_OSC_SEL_32KCLK_SRC; + rtc_writel(rtc, OMAP_RTC_OSC_REG, reg); } rtc->type->lock(rtc); From efce21fc43e00a76aee7b0a1eda73730ed2d5d3a Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Thu, 27 Oct 2016 11:27:26 +0530 Subject: [PATCH 360/792] rtc: omap: prevent disabling of clock/module during suspend If RTC is running from an internal clock source, the RTC module can't be disabled; otherwise it stops ticking completely. Current suspend handler implementation disables the clock/module unconditionally, instead fix this by disabling the clock only if we are running on external clock source, which is not affected by suspend. The prevention of disabling the clock must be done via implementing the runtime_pm handlers for the device, and returning an error code from the runtime suspend handler; otherwise OMAP core PM will disable the clocks for the driver. Signed-off-by: Tero Kristo Signed-off-by: Keerthy Signed-off-by: Alexandre Belloni --- drivers/rtc/rtc-omap.c | 32 ++++++++++++++++++++++++++------ 1 file changed, 26 insertions(+), 6 deletions(-) diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c index dddaa60871b9..51e52446eacb 100644 --- a/drivers/rtc/rtc-omap.c +++ b/drivers/rtc/rtc-omap.c @@ -147,6 +147,7 @@ struct omap_rtc { u8 interrupts_reg; bool is_pmic_controller; bool has_ext_clk; + bool is_suspending; const struct omap_rtc_device_type *type; struct pinctrl_dev *pctldev; }; @@ -900,8 +901,7 @@ static int omap_rtc_suspend(struct device *dev) rtc_write(rtc, OMAP_RTC_INTERRUPTS_REG, 0); rtc->type->lock(rtc); - /* Disable the clock/module */ - pm_runtime_put_sync(dev); + rtc->is_suspending = true; return 0; } @@ -910,9 +910,6 @@ static int omap_rtc_resume(struct device *dev) { struct omap_rtc *rtc = dev_get_drvdata(dev); - /* Enable the clock/module so that we can access the registers */ - pm_runtime_get_sync(dev); - rtc->type->unlock(rtc); if (device_may_wakeup(dev)) disable_irq_wake(rtc->irq_alarm); @@ -920,11 +917,34 @@ static int omap_rtc_resume(struct device *dev) rtc_write(rtc, OMAP_RTC_INTERRUPTS_REG, rtc->interrupts_reg); rtc->type->lock(rtc); + rtc->is_suspending = false; + return 0; } #endif -static SIMPLE_DEV_PM_OPS(omap_rtc_pm_ops, omap_rtc_suspend, omap_rtc_resume); +#ifdef CONFIG_PM +static int omap_rtc_runtime_suspend(struct device *dev) +{ + struct omap_rtc *rtc = dev_get_drvdata(dev); + + if (rtc->is_suspending && !rtc->has_ext_clk) + return -EBUSY; + + return 0; +} + +static int omap_rtc_runtime_resume(struct device *dev) +{ + return 0; +} +#endif + +static const struct dev_pm_ops omap_rtc_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(omap_rtc_suspend, omap_rtc_resume) + SET_RUNTIME_PM_OPS(omap_rtc_runtime_suspend, + omap_rtc_runtime_resume, NULL) +}; static void omap_rtc_shutdown(struct platform_device *pdev) { From 98430c7aad6a3fdedcc78a0d6780dabb6580dc38 Mon Sep 17 00:00:00 2001 From: Randy Li Date: Tue, 25 Oct 2016 22:15:34 +0800 Subject: [PATCH 361/792] phy: Add reset callback for not generic phy Add a dummy function for phy_reset in case the CONFIG_GENERIC_PHY is disabled. Signed-off-by: Randy Li Signed-off-by: Kishon Vijay Abraham I --- include/linux/phy/phy.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h index ee1bed7dbfc6..78bb0d7f6b11 100644 --- a/include/linux/phy/phy.h +++ b/include/linux/phy/phy.h @@ -253,6 +253,13 @@ static inline int phy_set_mode(struct phy *phy, enum phy_mode mode) return -ENOSYS; } +static inline int phy_reset(struct phy *phy) +{ + if (!phy) + return 0; + return -ENOSYS; +} + static inline int phy_get_bus_width(struct phy *phy) { return -ENOSYS; From 766325427fdb2a6816778b39331637761bccf13a Mon Sep 17 00:00:00 2001 From: Axel Haslam Date: Thu, 3 Nov 2016 17:03:07 +0100 Subject: [PATCH 362/792] phy: da8xx-usb: rename the ohci device to ohci-da8xx The ohci device name has changed in the board configuraion files, hence, change the phy lookup table to match the new name. Signed-off-by: Axel Haslam Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/phy-da8xx-usb.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/phy/phy-da8xx-usb.c b/drivers/phy/phy-da8xx-usb.c index 32ae78c8ca17..c85fb0b59729 100644 --- a/drivers/phy/phy-da8xx-usb.c +++ b/drivers/phy/phy-da8xx-usb.c @@ -198,7 +198,8 @@ static int da8xx_usb_phy_probe(struct platform_device *pdev) } else { int ret; - ret = phy_create_lookup(d_phy->usb11_phy, "usb-phy", "ohci.0"); + ret = phy_create_lookup(d_phy->usb11_phy, "usb-phy", + "ohci-da8xx"); if (ret) dev_warn(dev, "Failed to create usb11 phy lookup\n"); ret = phy_create_lookup(d_phy->usb20_phy, "usb-phy", @@ -216,7 +217,7 @@ static int da8xx_usb_phy_remove(struct platform_device *pdev) if (!pdev->dev.of_node) { phy_remove_lookup(d_phy->usb20_phy, "usb-phy", "musb-da8xx"); - phy_remove_lookup(d_phy->usb11_phy, "usb-phy", "ohci.0"); + phy_remove_lookup(d_phy->usb11_phy, "usb-phy", "ohci-da8xx"); } return 0; From 232c260982ab0100cbb29055933e45b928252687 Mon Sep 17 00:00:00 2001 From: Shawn Lin Date: Thu, 13 Oct 2016 12:42:13 +0800 Subject: [PATCH 363/792] phy-rockchip-pcie: remove deassert of phy_rst from exit callback The deassert of phy_rst from exit callback is incorrect as when doing phy_exit, we expect the phy_rst is on asserted state which was done by power_off callback, but not deasserted state. Meanwhile when disabling clk_pciephy_ref, the assert/deassert signal can't actually take effect on the phy. So let's fix it anyway. Signed-off-by: Shawn Lin Reviewed-by: Heiko Stuebner Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/phy-rockchip-pcie.c | 13 +------------ 1 file changed, 1 insertion(+), 12 deletions(-) diff --git a/drivers/phy/phy-rockchip-pcie.c b/drivers/phy/phy-rockchip-pcie.c index a2b4c6b58aea..6904633cad68 100644 --- a/drivers/phy/phy-rockchip-pcie.c +++ b/drivers/phy/phy-rockchip-pcie.c @@ -249,21 +249,10 @@ err_refclk: static int rockchip_pcie_phy_exit(struct phy *phy) { struct rockchip_pcie_phy *rk_phy = phy_get_drvdata(phy); - int err = 0; clk_disable_unprepare(rk_phy->clk_pciephy_ref); - err = reset_control_deassert(rk_phy->phy_rst); - if (err) { - dev_err(&phy->dev, "deassert phy_rst err %d\n", err); - goto err_reset; - } - - return err; - -err_reset: - clk_prepare_enable(rk_phy->clk_pciephy_ref); - return err; + return 0; } static const struct phy_ops ops = { From 4320f9d4c1831fd4d244a9de8f81bc27ea67699c Mon Sep 17 00:00:00 2001 From: Icenowy Zheng Date: Sat, 29 Oct 2016 00:27:01 +0800 Subject: [PATCH 364/792] phy: sun4i: check PMU presence when poking unknown bit of pmu Allwinner SoC's PHY 0, when used as OTG controller, have no pmu part. The code that poke some unknown bit of PMU for H3/A64 didn't check the PHY, and will cause kernel oops when PHY 0 is used. This patch will check whether the pmu is not NULL before poking. Fixes: b3e0d141ca9f (phy: sun4i: add support for A64 usb phy) Signed-off-by: Icenowy Zheng Acked-by: Maxime Ripard Reviewed-by: Hans de Goede Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/phy-sun4i-usb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c index b9342a2af7b3..fec34f5213c4 100644 --- a/drivers/phy/phy-sun4i-usb.c +++ b/drivers/phy/phy-sun4i-usb.c @@ -264,7 +264,7 @@ static int sun4i_usb_phy_init(struct phy *_phy) return ret; } - if (data->cfg->enable_pmu_unk1) { + if (phy->pmu && data->cfg->enable_pmu_unk1) { val = readl(phy->pmu + REG_PMU_UNK1); writel(val & ~2, phy->pmu + REG_PMU_UNK1); } From e3c9d9d6ebfeeeee29c6240e1b5978d40d31d21f Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 27 Oct 2016 13:06:44 -0200 Subject: [PATCH 365/792] ARM: dts: imx53-qsb: Fix regulator constraints Since commit fa93fd4ecc9c ("regulator: core: Ensure we are at least in bounds for our constraints") the imx53-qsb board populated with a Dialog DA9053 PMIC fails to boot: LDO3: Bringing 3300000uV into 1800000-1800000uV The LDO3 voltage constraints passed in the device tree do not match the valid range according to the datasheet, so fix this accordingly to allow the board booting again. While at it, fix the other voltage constraints as well. Cc: # 4.7.x Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx53-qsb.dts | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts index dec4b073ceb1..379939699164 100644 --- a/arch/arm/boot/dts/imx53-qsb.dts +++ b/arch/arm/boot/dts/imx53-qsb.dts @@ -64,8 +64,8 @@ }; ldo3_reg: ldo3 { - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <1725000>; + regulator-max-microvolt = <3300000>; regulator-always-on; }; @@ -76,8 +76,8 @@ }; ldo5_reg: ldo5 { - regulator-min-microvolt = <1725000>; - regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; regulator-always-on; }; @@ -100,14 +100,14 @@ }; ldo9_reg: ldo9 { - regulator-min-microvolt = <1200000>; + regulator-min-microvolt = <1250000>; regulator-max-microvolt = <3600000>; regulator-always-on; }; ldo10_reg: ldo10 { - regulator-min-microvolt = <1250000>; - regulator-max-microvolt = <3650000>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; regulator-always-on; }; }; From c2ed83f5426624beda0ecfcb17df033fe4bff7f7 Mon Sep 17 00:00:00 2001 From: Even Xu Date: Fri, 21 Oct 2016 15:48:38 -0700 Subject: [PATCH 366/792] HID: intel-ish-hid: consolidate ish wake up operation Same operations are done in ish_hw_start() and _ish_hw_reset() to wakeup ISH device. Consolidate them by introducing a new function ish_wakeup() and move the code there. Signed-off-by: Even Xu Acked-by: Srinivas Pandruvada Signed-off-by: Jiri Kosina --- drivers/hid/intel-ish-hid/ipc/ipc.c | 45 +++++++++++++++++------------ 1 file changed, 26 insertions(+), 19 deletions(-) diff --git a/drivers/hid/intel-ish-hid/ipc/ipc.c b/drivers/hid/intel-ish-hid/ipc/ipc.c index e2517c11e0ee..d4c57214ba6c 100644 --- a/drivers/hid/intel-ish-hid/ipc/ipc.c +++ b/drivers/hid/intel-ish-hid/ipc/ipc.c @@ -637,6 +637,28 @@ eoi: return IRQ_HANDLED; } +/** + * ish_wakeup() - wakeup ishfw from waiting-for-host state + * @dev: ishtp device pointer + * + * Set the dma enable bit and send a void message to FW, + * it wil wakeup FW from waiting-for-host state. + */ +static void ish_wakeup(struct ishtp_device *dev) +{ + /* Set dma enable bit */ + ish_reg_write(dev, IPC_REG_ISH_RMP2, IPC_RMP2_DMA_ENABLED); + + /* + * Send 0 IPC message so that ISH FW wakes up if it was already + * asleep. + */ + ish_reg_write(dev, IPC_REG_HOST2ISH_DRBL, IPC_DRBL_BUSY_BIT); + + /* Flush writes to doorbell and REMAP2 */ + ish_reg_read(dev, IPC_REG_ISH_HOST_FWSTS); +} + /** * _ish_hw_reset() - HW reset * @dev: ishtp device pointer @@ -690,16 +712,8 @@ static int _ish_hw_reset(struct ishtp_device *dev) csr |= PCI_D0; pci_write_config_word(pdev, pdev->pm_cap + PCI_PM_CTRL, csr); - ish_reg_write(dev, IPC_REG_ISH_RMP2, IPC_RMP2_DMA_ENABLED); - - /* - * Send 0 IPC message so that ISH FW wakes up if it was already - * asleep - */ - ish_reg_write(dev, IPC_REG_HOST2ISH_DRBL, IPC_DRBL_BUSY_BIT); - - /* Flush writes to doorbell and REMAP2 */ - ish_reg_read(dev, IPC_REG_ISH_HOST_FWSTS); + /* Now we can enable ISH DMA operation and wakeup ISHFW */ + ish_wakeup(dev); return 0; } @@ -758,16 +772,9 @@ static int _ish_ipc_reset(struct ishtp_device *dev) int ish_hw_start(struct ishtp_device *dev) { ish_set_host_rdy(dev); - /* After that we can enable ISH DMA operation */ - ish_reg_write(dev, IPC_REG_ISH_RMP2, IPC_RMP2_DMA_ENABLED); - /* - * Send 0 IPC message so that ISH FW wakes up if it was already - * asleep - */ - ish_reg_write(dev, IPC_REG_HOST2ISH_DRBL, IPC_DRBL_BUSY_BIT); - /* Flush write to doorbell */ - ish_reg_read(dev, IPC_REG_ISH_HOST_FWSTS); + /* After that we can enable ISH DMA operation and wakeup ISHFW */ + ish_wakeup(dev); set_host_ready(dev); From 8b2979febc134f038f3c8396cb04893f96e03b4f Mon Sep 17 00:00:00 2001 From: Even Xu Date: Fri, 21 Oct 2016 15:48:39 -0700 Subject: [PATCH 367/792] HID: intel-ish-hid: Move DMA disable code to new function Add a new function ish_disable_dma() and move DMA disable operations here, so that this functionality can be reused. Signed-off-by: Even Xu Acked-by: Srinivas Pandruvada Signed-off-by: Jiri Kosina --- drivers/hid/intel-ish-hid/ipc/ipc.c | 42 ++++++++++++++++++++++------- 1 file changed, 32 insertions(+), 10 deletions(-) diff --git a/drivers/hid/intel-ish-hid/ipc/ipc.c b/drivers/hid/intel-ish-hid/ipc/ipc.c index d4c57214ba6c..0e0dfa616fab 100644 --- a/drivers/hid/intel-ish-hid/ipc/ipc.c +++ b/drivers/hid/intel-ish-hid/ipc/ipc.c @@ -637,6 +637,36 @@ eoi: return IRQ_HANDLED; } +/** + * ish_disable_dma() - disable dma communication between host and ISHFW + * @dev: ishtp device pointer + * + * Clear the dma enable bit and wait for dma inactive. + * + * Return: 0 for success else error code. + */ +static int ish_disable_dma(struct ishtp_device *dev) +{ + unsigned int dma_delay; + + /* Clear the dma enable bit */ + ish_reg_write(dev, IPC_REG_ISH_RMP2, 0); + + /* wait for dma inactive */ + for (dma_delay = 0; dma_delay < MAX_DMA_DELAY && + _ish_read_fw_sts_reg(dev) & (IPC_ISH_IN_DMA); + dma_delay += 5) + mdelay(5); + + if (dma_delay >= MAX_DMA_DELAY) { + dev_err(dev->devc, + "Wait for DMA inactive timeout\n"); + return -EBUSY; + } + + return 0; +} + /** * ish_wakeup() - wakeup ishfw from waiting-for-host state * @dev: ishtp device pointer @@ -671,7 +701,6 @@ static int _ish_hw_reset(struct ishtp_device *dev) { struct pci_dev *pdev = dev->pdev; int rv; - unsigned int dma_delay; uint16_t csr; if (!pdev) @@ -686,15 +715,8 @@ static int _ish_hw_reset(struct ishtp_device *dev) return -EINVAL; } - /* Now trigger reset to FW */ - ish_reg_write(dev, IPC_REG_ISH_RMP2, 0); - - for (dma_delay = 0; dma_delay < MAX_DMA_DELAY && - _ish_read_fw_sts_reg(dev) & (IPC_ISH_IN_DMA); - dma_delay += 5) - mdelay(5); - - if (dma_delay >= MAX_DMA_DELAY) { + /* Disable dma communication between FW and host */ + if (ish_disable_dma(dev)) { dev_err(&pdev->dev, "Can't reset - stuck with DMA in-progress\n"); return -EBUSY; From 2a1e3b932c5606e2b3671b82eb63929937eb1e0b Mon Sep 17 00:00:00 2001 From: Even Xu Date: Fri, 21 Oct 2016 15:48:40 -0700 Subject: [PATCH 368/792] HID: intel-ish-hid: Fix driver reinit failure When built as a module, modprobe followed by rmmod can fail because DMA was still active. So to fix this, DMA needs to be disabled during module exit. This change disables DMA during modules exit and change the ISH PCI device status to D3. Signed-off-by: Even Xu Acked-by: Srinivas Pandruvada Signed-off-by: Jiri Kosina --- drivers/hid/intel-ish-hid/ipc/ipc.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/hid/intel-ish-hid/ipc/ipc.c b/drivers/hid/intel-ish-hid/ipc/ipc.c index 0e0dfa616fab..0c9ac4d5d850 100644 --- a/drivers/hid/intel-ish-hid/ipc/ipc.c +++ b/drivers/hid/intel-ish-hid/ipc/ipc.c @@ -905,6 +905,21 @@ struct ishtp_device *ish_dev_init(struct pci_dev *pdev) */ void ish_device_disable(struct ishtp_device *dev) { + struct pci_dev *pdev = dev->pdev; + + if (!pdev) + return; + + /* Disable dma communication between FW and host */ + if (ish_disable_dma(dev)) { + dev_err(&pdev->dev, + "Can't reset - stuck with DMA in-progress\n"); + return; + } + + /* Put ISH to D3hot state for power saving */ + pci_set_power_state(pdev, PCI_D3hot); + dev->dev_state = ISHTP_DEV_DISABLED; ish_clr_host_rdy(dev); } From 021afd55e2191248b471b29b9d0a96c267939a4d Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Fri, 21 Oct 2016 15:48:41 -0700 Subject: [PATCH 369/792] HID: intel-ish-hid: request_irq failure On some platforms ISH interrupt is shared, which causes request_irq to fail. This requires IRQF_SHARED irq flag. But IRQF_NO_SUSPEND and IRQF_SHARED should not be used together, so removed IRQF_NO_SUSPEND flag. Anyway this driver doesn't require IRQF_NO_SUSPEND, as this interrupt is not required during "noirq" phases of suspending and resuming devices as well as during the time when nonboot CPUs are taken offline and brought back online. Signed-off-by: Srinivas Pandruvada Signed-off-by: Jiri Kosina --- drivers/hid/intel-ish-hid/ipc/pci-ish.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hid/intel-ish-hid/ipc/pci-ish.c b/drivers/hid/intel-ish-hid/ipc/pci-ish.c index 7e3622a724aa..20d647d2dd2c 100644 --- a/drivers/hid/intel-ish-hid/ipc/pci-ish.c +++ b/drivers/hid/intel-ish-hid/ipc/pci-ish.c @@ -146,7 +146,7 @@ static int ish_probe(struct pci_dev *pdev, const struct pci_device_id *ent) pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3; /* request and enable interrupt */ - ret = request_irq(pdev->irq, ish_irq_handler, IRQF_NO_SUSPEND, + ret = request_irq(pdev->irq, ish_irq_handler, IRQF_SHARED, KBUILD_MODNAME, dev); if (ret) { dev_err(&pdev->dev, "ISH: request IRQ failure (%d)\n", From 4c4480aad0d8eaf0d52b6f2c8c5dfbe0531cbbea Mon Sep 17 00:00:00 2001 From: "Ooi, Joyce" Date: Thu, 3 Nov 2016 18:55:15 +0800 Subject: [PATCH 370/792] HID: sensor: fix attributes in HID sensor interface User is unable to access to input-X-yyy and feature-X-yyy where X is a hex value and more than 9 (e.g. input-a-yyy, feature-b-yyy) in HID sensor custom sysfs interface. This is because when creating the attribute, the attribute index is written to using %x (hex). However, when reading and writing values into the attribute, the attribute index is scanned using %d (decimal). Hence, user is unable to access to attributes with index in hex values (e.g. 'a', 'b', 'c') but able to access to attributes with index in decimal values (e.g. 1, 2, 3,..). This fix will change input-%d-%x-%s and feature-%d-%x-%s to input-%x-%x-%s and feature-%x-%x-%s in show_values() and store_values() accordingly. Signed-off-by: Ooi, Joyce Reviewed-by: Benjamin Tissoires Acked-by: Srinivas Pandruvada Signed-off-by: Jiri Kosina --- drivers/hid/hid-sensor-custom.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/hid/hid-sensor-custom.c b/drivers/hid/hid-sensor-custom.c index 5614fee82347..3a84aaf1418b 100644 --- a/drivers/hid/hid-sensor-custom.c +++ b/drivers/hid/hid-sensor-custom.c @@ -292,11 +292,11 @@ static ssize_t show_value(struct device *dev, struct device_attribute *attr, bool input = false; int value = 0; - if (sscanf(attr->attr.name, "feature-%d-%x-%s", &index, &usage, + if (sscanf(attr->attr.name, "feature-%x-%x-%s", &index, &usage, name) == 3) { feature = true; field_index = index + sensor_inst->input_field_count; - } else if (sscanf(attr->attr.name, "input-%d-%x-%s", &index, &usage, + } else if (sscanf(attr->attr.name, "input-%x-%x-%s", &index, &usage, name) == 3) { input = true; field_index = index; @@ -398,7 +398,7 @@ static ssize_t store_value(struct device *dev, struct device_attribute *attr, char name[HID_CUSTOM_NAME_LENGTH]; int value; - if (sscanf(attr->attr.name, "feature-%d-%x-%s", &index, &usage, + if (sscanf(attr->attr.name, "feature-%x-%x-%s", &index, &usage, name) == 3) { field_index = index + sensor_inst->input_field_count; } else From 8af644a7d6846f48d6b72be5d4a3c6eb16bd33c8 Mon Sep 17 00:00:00 2001 From: Song Hongyan Date: Tue, 25 Oct 2016 01:06:03 +0000 Subject: [PATCH 371/792] iio: orientation: hid-sensor-rotation: Add PM function (fix non working driver) This fix makes newer ISH hubs work. Previous ones worked by lucky coincidence. Rotation sensor function does not work due to miss PM function. Add common hid sensor iio pm function for rotation sensor. Further clarification from Srinivas: If CONFIG_PM is not defined, then this prevents this sensor to function. So above commit caused this. This sensor was supposed to be always on to trigger wake up in prior external hubs. But with the new ISH hub this is not the case. Signed-off-by: Song Hongyan Fixes: 2b89635e9a9e ("iio: hid_sensor_hub: Common PM functions") Cc: Signed-off-by: Jonathan Cameron --- drivers/iio/orientation/hid-sensor-rotation.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/iio/orientation/hid-sensor-rotation.c b/drivers/iio/orientation/hid-sensor-rotation.c index b98b9d94d184..a97e802ca523 100644 --- a/drivers/iio/orientation/hid-sensor-rotation.c +++ b/drivers/iio/orientation/hid-sensor-rotation.c @@ -335,6 +335,7 @@ static struct platform_driver hid_dev_rot_platform_driver = { .id_table = hid_dev_rot_ids, .driver = { .name = KBUILD_MODNAME, + .pm = &hid_sensor_pm_ops, }, .probe = hid_dev_rot_probe, .remove = hid_dev_rot_remove, From 6f77199e9e4b84340c751c585691d7642a47d226 Mon Sep 17 00:00:00 2001 From: Song Hongyan Date: Tue, 25 Oct 2016 01:30:07 +0000 Subject: [PATCH 372/792] iio: hid-sensors: Increase the precision of scale to fix wrong reading interpretation. While testing, it was observed that on some platforms the scale value from iio sysfs for gyroscope is always 0 (E.g. Yoga 260). This results in the final angular velocity component values to be zeros. This is caused by insufficient precision of scale value displayed in sysfs. If the precision is changed to nano from current micro, then this is sufficient to display the scale value on this platform. Since this can be a problem for all other HID sensors, increase scale precision of all HID sensors to nano from current micro. Results on Yoga 260: name scale before scale now -------------------------------------------- gyro_3d 0.000000 0.000000174 als 0.001000 0.001000000 magn_3d 0.000001 0.000001000 accel_3d 0.000009 0.000009806 Signed-off-by: Song Hongyan Acked-by: Srinivas Pandruvada Cc: Signed-off-by: Jonathan Cameron --- .../hid-sensors/hid-sensor-attributes.c | 56 +++++++++---------- 1 file changed, 28 insertions(+), 28 deletions(-) diff --git a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c index dc33c1dd5191..b5beea53d6f6 100644 --- a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c +++ b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c @@ -30,26 +30,26 @@ static struct { u32 usage_id; int unit; /* 0 for default others from HID sensor spec */ int scale_val0; /* scale, whole number */ - int scale_val1; /* scale, fraction in micros */ + int scale_val1; /* scale, fraction in nanos */ } unit_conversion[] = { - {HID_USAGE_SENSOR_ACCEL_3D, 0, 9, 806650}, + {HID_USAGE_SENSOR_ACCEL_3D, 0, 9, 806650000}, {HID_USAGE_SENSOR_ACCEL_3D, HID_USAGE_SENSOR_UNITS_METERS_PER_SEC_SQRD, 1, 0}, {HID_USAGE_SENSOR_ACCEL_3D, - HID_USAGE_SENSOR_UNITS_G, 9, 806650}, + HID_USAGE_SENSOR_UNITS_G, 9, 806650000}, - {HID_USAGE_SENSOR_GYRO_3D, 0, 0, 17453}, + {HID_USAGE_SENSOR_GYRO_3D, 0, 0, 17453293}, {HID_USAGE_SENSOR_GYRO_3D, HID_USAGE_SENSOR_UNITS_RADIANS_PER_SECOND, 1, 0}, {HID_USAGE_SENSOR_GYRO_3D, - HID_USAGE_SENSOR_UNITS_DEGREES_PER_SECOND, 0, 17453}, + HID_USAGE_SENSOR_UNITS_DEGREES_PER_SECOND, 0, 17453293}, - {HID_USAGE_SENSOR_COMPASS_3D, 0, 0, 1000}, + {HID_USAGE_SENSOR_COMPASS_3D, 0, 0, 1000000}, {HID_USAGE_SENSOR_COMPASS_3D, HID_USAGE_SENSOR_UNITS_GAUSS, 1, 0}, - {HID_USAGE_SENSOR_INCLINOMETER_3D, 0, 0, 17453}, + {HID_USAGE_SENSOR_INCLINOMETER_3D, 0, 0, 17453293}, {HID_USAGE_SENSOR_INCLINOMETER_3D, - HID_USAGE_SENSOR_UNITS_DEGREES, 0, 17453}, + HID_USAGE_SENSOR_UNITS_DEGREES, 0, 17453293}, {HID_USAGE_SENSOR_INCLINOMETER_3D, HID_USAGE_SENSOR_UNITS_RADIANS, 1, 0}, @@ -57,7 +57,7 @@ static struct { {HID_USAGE_SENSOR_ALS, HID_USAGE_SENSOR_UNITS_LUX, 1, 0}, {HID_USAGE_SENSOR_PRESSURE, 0, 100, 0}, - {HID_USAGE_SENSOR_PRESSURE, HID_USAGE_SENSOR_UNITS_PASCAL, 0, 1000}, + {HID_USAGE_SENSOR_PRESSURE, HID_USAGE_SENSOR_UNITS_PASCAL, 0, 1000000}, }; static int pow_10(unsigned power) @@ -266,15 +266,15 @@ EXPORT_SYMBOL(hid_sensor_write_raw_hyst_value); /* * This fuction applies the unit exponent to the scale. * For example: - * 9.806650 ->exp:2-> val0[980]val1[665000] - * 9.000806 ->exp:2-> val0[900]val1[80600] - * 0.174535 ->exp:2-> val0[17]val1[453500] - * 1.001745 ->exp:0-> val0[1]val1[1745] - * 1.001745 ->exp:2-> val0[100]val1[174500] - * 1.001745 ->exp:4-> val0[10017]val1[450000] - * 9.806650 ->exp:-2-> val0[0]val1[98066] + * 9.806650000 ->exp:2-> val0[980]val1[665000000] + * 9.000806000 ->exp:2-> val0[900]val1[80600000] + * 0.174535293 ->exp:2-> val0[17]val1[453529300] + * 1.001745329 ->exp:0-> val0[1]val1[1745329] + * 1.001745329 ->exp:2-> val0[100]val1[174532900] + * 1.001745329 ->exp:4-> val0[10017]val1[453290000] + * 9.806650000 ->exp:-2-> val0[0]val1[98066500] */ -static void adjust_exponent_micro(int *val0, int *val1, int scale0, +static void adjust_exponent_nano(int *val0, int *val1, int scale0, int scale1, int exp) { int i; @@ -285,32 +285,32 @@ static void adjust_exponent_micro(int *val0, int *val1, int scale0, if (exp > 0) { *val0 = scale0 * pow_10(exp); res = 0; - if (exp > 6) { + if (exp > 9) { *val1 = 0; return; } for (i = 0; i < exp; ++i) { - x = scale1 / pow_10(5 - i); + x = scale1 / pow_10(8 - i); res += (pow_10(exp - 1 - i) * x); - scale1 = scale1 % pow_10(5 - i); + scale1 = scale1 % pow_10(8 - i); } *val0 += res; *val1 = scale1 * pow_10(exp); } else if (exp < 0) { exp = abs(exp); - if (exp > 6) { + if (exp > 9) { *val0 = *val1 = 0; return; } *val0 = scale0 / pow_10(exp); rem = scale0 % pow_10(exp); res = 0; - for (i = 0; i < (6 - exp); ++i) { - x = scale1 / pow_10(5 - i); - res += (pow_10(5 - exp - i) * x); - scale1 = scale1 % pow_10(5 - i); + for (i = 0; i < (9 - exp); ++i) { + x = scale1 / pow_10(8 - i); + res += (pow_10(8 - exp - i) * x); + scale1 = scale1 % pow_10(8 - i); } - *val1 = rem * pow_10(6 - exp) + res; + *val1 = rem * pow_10(9 - exp) + res; } else { *val0 = scale0; *val1 = scale1; @@ -332,14 +332,14 @@ int hid_sensor_format_scale(u32 usage_id, unit_conversion[i].unit == attr_info->units) { exp = hid_sensor_convert_exponent( attr_info->unit_expo); - adjust_exponent_micro(val0, val1, + adjust_exponent_nano(val0, val1, unit_conversion[i].scale_val0, unit_conversion[i].scale_val1, exp); break; } } - return IIO_VAL_INT_PLUS_MICRO; + return IIO_VAL_INT_PLUS_NANO; } EXPORT_SYMBOL(hid_sensor_format_scale); From 272d01bd790fdf3f1b16372fe28136e27756756f Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Thu, 3 Nov 2016 18:34:34 +0000 Subject: [PATCH 373/792] arm64: Fix circular include of asm/lse.h through linux/jump_label.h Commit efd9e03facd0 ("arm64: Use static keys for CPU features") introduced support for static keys in asm/cpufeature.h, including linux/jump_label.h. When CC_HAVE_ASM_GOTO is not defined, this causes a circular dependency via linux/atomic.h, asm/lse.h and asm/cpufeature.h. This patch moves the capability macros out out of asm/cpufeature.h into a separate asm/cpucaps.h and modifies some of the #includes accordingly. Fixes: efd9e03facd0 ("arm64: Use static keys for CPU features") Reported-by: Artem Savkov Tested-by: Artem Savkov Signed-off-by: Catalin Marinas Signed-off-by: Will Deacon --- arch/arm64/include/asm/alternative.h | 2 +- arch/arm64/include/asm/cpucaps.h | 40 ++++++++++++++++++++++++++++ arch/arm64/include/asm/cpufeature.h | 20 +------------- arch/arm64/include/asm/lse.h | 1 - 4 files changed, 42 insertions(+), 21 deletions(-) create mode 100644 arch/arm64/include/asm/cpucaps.h diff --git a/arch/arm64/include/asm/alternative.h b/arch/arm64/include/asm/alternative.h index 39feb85a6931..6e1cb8c5af4d 100644 --- a/arch/arm64/include/asm/alternative.h +++ b/arch/arm64/include/asm/alternative.h @@ -1,7 +1,7 @@ #ifndef __ASM_ALTERNATIVE_H #define __ASM_ALTERNATIVE_H -#include +#include #include #ifndef __ASSEMBLY__ diff --git a/arch/arm64/include/asm/cpucaps.h b/arch/arm64/include/asm/cpucaps.h new file mode 100644 index 000000000000..87b446535185 --- /dev/null +++ b/arch/arm64/include/asm/cpucaps.h @@ -0,0 +1,40 @@ +/* + * arch/arm64/include/asm/cpucaps.h + * + * Copyright (C) 2016 ARM Ltd. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#ifndef __ASM_CPUCAPS_H +#define __ASM_CPUCAPS_H + +#define ARM64_WORKAROUND_CLEAN_CACHE 0 +#define ARM64_WORKAROUND_DEVICE_LOAD_ACQUIRE 1 +#define ARM64_WORKAROUND_845719 2 +#define ARM64_HAS_SYSREG_GIC_CPUIF 3 +#define ARM64_HAS_PAN 4 +#define ARM64_HAS_LSE_ATOMICS 5 +#define ARM64_WORKAROUND_CAVIUM_23154 6 +#define ARM64_WORKAROUND_834220 7 +#define ARM64_HAS_NO_HW_PREFETCH 8 +#define ARM64_HAS_UAO 9 +#define ARM64_ALT_PAN_NOT_UAO 10 +#define ARM64_HAS_VIRT_HOST_EXTN 11 +#define ARM64_WORKAROUND_CAVIUM_27456 12 +#define ARM64_HAS_32BIT_EL0 13 +#define ARM64_HYP_OFFSET_LOW 14 +#define ARM64_MISMATCHED_CACHE_LINE_SIZE 15 + +#define ARM64_NCAPS 16 + +#endif /* __ASM_CPUCAPS_H */ diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h index a27c3245ba21..0bc0b1de90c4 100644 --- a/arch/arm64/include/asm/cpufeature.h +++ b/arch/arm64/include/asm/cpufeature.h @@ -11,6 +11,7 @@ #include +#include #include #include @@ -24,25 +25,6 @@ #define MAX_CPU_FEATURES (8 * sizeof(elf_hwcap)) #define cpu_feature(x) ilog2(HWCAP_ ## x) -#define ARM64_WORKAROUND_CLEAN_CACHE 0 -#define ARM64_WORKAROUND_DEVICE_LOAD_ACQUIRE 1 -#define ARM64_WORKAROUND_845719 2 -#define ARM64_HAS_SYSREG_GIC_CPUIF 3 -#define ARM64_HAS_PAN 4 -#define ARM64_HAS_LSE_ATOMICS 5 -#define ARM64_WORKAROUND_CAVIUM_23154 6 -#define ARM64_WORKAROUND_834220 7 -#define ARM64_HAS_NO_HW_PREFETCH 8 -#define ARM64_HAS_UAO 9 -#define ARM64_ALT_PAN_NOT_UAO 10 -#define ARM64_HAS_VIRT_HOST_EXTN 11 -#define ARM64_WORKAROUND_CAVIUM_27456 12 -#define ARM64_HAS_32BIT_EL0 13 -#define ARM64_HYP_OFFSET_LOW 14 -#define ARM64_MISMATCHED_CACHE_LINE_SIZE 15 - -#define ARM64_NCAPS 16 - #ifndef __ASSEMBLY__ #include diff --git a/arch/arm64/include/asm/lse.h b/arch/arm64/include/asm/lse.h index 23acc00be32d..fc756e22c84c 100644 --- a/arch/arm64/include/asm/lse.h +++ b/arch/arm64/include/asm/lse.h @@ -5,7 +5,6 @@ #include #include -#include #ifdef __ASSEMBLER__ From bc33b0ca11e3df467777a4fa7639ba488c9d4911 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 5 Nov 2016 16:23:36 -0700 Subject: [PATCH 374/792] Linux 4.9-rc4 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index a2650f9c6a25..f97f786de58d 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 4 PATCHLEVEL = 9 SUBLEVEL = 0 -EXTRAVERSION = -rc3 +EXTRAVERSION = -rc4 NAME = Psychotic Stoned Sheep # *DOCUMENTATION* From 2c7a5c5c48d97ce3105f3258a259f67b7b9d7eb1 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sat, 24 Sep 2016 07:15:02 -0700 Subject: [PATCH 375/792] openrisc: Define __ro_after_init to avoid crash openrisc qemu tests fail with the following crash. Unable to handle kernel access at virtual address 0xc0300c34 Oops#: 0001 CPU #: 0 PC: c016c710 SR: 0000ae67 SP: c1017e04 GPR00: 00000000 GPR01: c1017e04 GPR02: c0300c34 GPR03: c0300c34 GPR04: 00000000 GPR05: c0300cb0 GPR06: c0300c34 GPR07: 000000ff GPR08: c107f074 GPR09: c0199ef4 GPR10: c1016000 GPR11: 00000000 GPR12: 00000000 GPR13: c107f044 GPR14: c0473774 GPR15: 07ce0000 GPR16: 00000000 GPR17: c107ed8a GPR18: 00009600 GPR19: c107f044 GPR20: c107ee74 GPR21: 00000003 GPR22: c0473770 GPR23: 00000033 GPR24: 000000bf GPR25: 00000019 GPR26: c046400c GPR27: 00000001 GPR28: c0464028 GPR29: c1018000 GPR30: 00000006 GPR31: ccf37483 RES: 00000000 oGPR11: ffffffff Process swapper (pid: 1, stackpage=c1001960) Stack: Stack dump [0xc1017cf8]: sp + 00: 0xc1017e04 sp + 04: 0xc0300c34 sp + 08: 0xc0300c34 sp + 12: 0x00000000 ... Bisect points to commit d2ec3f77de8e ("pty: make ptmx file ops read-only after init"). Fix by defining __ro_after_init for the openrisc architecture, similar to parisc. Fixes: d2ec3f77de8e ("pty: make ptmx file ops read-only after init") Cc: Kees Cook Signed-off-by: Guenter Roeck Acked-by: Stafford Horne --- arch/openrisc/include/asm/cache.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/openrisc/include/asm/cache.h b/arch/openrisc/include/asm/cache.h index 4ce7a01a252d..5f55da9cbfd5 100644 --- a/arch/openrisc/include/asm/cache.h +++ b/arch/openrisc/include/asm/cache.h @@ -23,6 +23,8 @@ * they shouldn't be hard-coded! */ +#define __ro_after_init __read_mostly + #define L1_CACHE_BYTES 16 #define L1_CACHE_SHIFT 4 From 6d6d36bc6e77f8b1f86d81884ad5149931bb4acd Mon Sep 17 00:00:00 2001 From: Eryu Guan Date: Tue, 1 Nov 2016 15:43:07 +0800 Subject: [PATCH 376/792] mm/filemap: don't allow partially uptodate page for pipes Starting from 4.9-rc1 kernel, I started noticing some test failures of sendfile(2) and splice(2) (sendfile0N and splice01 from LTP) when testing on sub-page block size filesystems (tested both XFS and ext4), these syscalls start to return EIO in the tests. e.g. sendfile02 1 TFAIL : sendfile02.c:133: sendfile(2) failed to return expected value, expected: 26, got: -1 sendfile02 2 TFAIL : sendfile02.c:133: sendfile(2) failed to return expected value, expected: 24, got: -1 sendfile02 3 TFAIL : sendfile02.c:133: sendfile(2) failed to return expected value, expected: 22, got: -1 sendfile02 4 TFAIL : sendfile02.c:133: sendfile(2) failed to return expected value, expected: 20, got: -1 This is because that in sub-page block size cases, we don't need the whole page to be uptodate, only the part we care about is uptodate is OK (if fs has ->is_partially_uptodate defined). But page_cache_pipe_buf_confirm() doesn't have the ability to check the partially-uptodate case, it needs the whole page to be uptodate. So it returns EIO in this case. This is a regression introduced by commit 82c156f85384 ("switch generic_file_splice_read() to use of ->read_iter()"). Prior to the change, generic_file_splice_read() doesn't allow partially-uptodate page either, so it worked fine. Fix it by skipping the partially-uptodate check if we're working on a pipe in do_generic_file_read(), so we read the whole page from disk as long as the page is not uptodate. Signed-off-by: Eryu Guan Signed-off-by: Al Viro --- mm/filemap.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/mm/filemap.c b/mm/filemap.c index c7fe2f16503f..50b52fe51937 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -1732,6 +1732,9 @@ find_page: if (inode->i_blkbits == PAGE_SHIFT || !mapping->a_ops->is_partially_uptodate) goto page_not_up_to_date; + /* pipes can't handle partially uptodate pages */ + if (unlikely(iter->type & ITER_PIPE)) + goto page_not_up_to_date; if (!trylock_page(page)) goto page_not_up_to_date; /* Did it get truncated before we got the lock? */ From 772918524dfb8c8869120728c1b1109a2d49493c Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Sun, 30 Oct 2016 05:28:27 +0100 Subject: [PATCH 377/792] nbd: Fix error handling 'blk_mq_alloc_request()' returns an error pointer in case of error, not NULL. So test it with IS_ERR. Fixes: fd8383fd88a2 ("nbd: convert to blkmq") Signed-off-by: Christophe JAILLET Signed-off-by: Jens Axboe --- drivers/block/nbd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index 19a16b2dbb91..7a1048755914 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -599,7 +599,7 @@ static int __nbd_ioctl(struct block_device *bdev, struct nbd_device *nbd, return -EINVAL; sreq = blk_mq_alloc_request(bdev_get_queue(bdev), WRITE, 0); - if (!sreq) + if (IS_ERR(sreq)) return -ENOMEM; mutex_unlock(&nbd->tx_lock); From d4eccafcaf339de77ec562e96e6b223d447f924a Mon Sep 17 00:00:00 2001 From: Max Filippov Date: Fri, 4 Nov 2016 14:45:08 -0700 Subject: [PATCH 378/792] xtensa: clean up printk usage for boot/crash logging Convert printk(KERN_* to pr_* and printk's without level to pr_cont. This fixes torn register dumps, stack dumps, stack traces and timestamps in the middle of 'Calibrating CPU frequency' message. Also drop unused show_code and drop false comment about show_stack. Signed-off-by: Max Filippov --- arch/xtensa/kernel/time.c | 14 ++++---- arch/xtensa/kernel/traps.c | 74 ++++++++++++-------------------------- 2 files changed, 29 insertions(+), 59 deletions(-) diff --git a/arch/xtensa/kernel/time.c b/arch/xtensa/kernel/time.c index 9a5bcd0381a7..be81e69b25bc 100644 --- a/arch/xtensa/kernel/time.c +++ b/arch/xtensa/kernel/time.c @@ -172,10 +172,11 @@ void __init time_init(void) { of_clk_init(NULL); #ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT - printk("Calibrating CPU frequency "); + pr_info("Calibrating CPU frequency "); calibrate_ccount(); - printk("%d.%02d MHz\n", (int)ccount_freq/1000000, - (int)(ccount_freq/10000)%100); + pr_cont("%d.%02d MHz\n", + (int)ccount_freq / 1000000, + (int)(ccount_freq / 10000) % 100); #else ccount_freq = CONFIG_XTENSA_CPU_CLOCK*1000000UL; #endif @@ -210,9 +211,8 @@ irqreturn_t timer_interrupt(int irq, void *dev_id) void calibrate_delay(void) { loops_per_jiffy = ccount_freq / HZ; - printk("Calibrating delay loop (skipped)... " - "%lu.%02lu BogoMIPS preset\n", - loops_per_jiffy/(1000000/HZ), - (loops_per_jiffy/(10000/HZ)) % 100); + pr_info("Calibrating delay loop (skipped)... %lu.%02lu BogoMIPS preset\n", + loops_per_jiffy / (1000000 / HZ), + (loops_per_jiffy / (10000 / HZ)) % 100); } #endif diff --git a/arch/xtensa/kernel/traps.c b/arch/xtensa/kernel/traps.c index d02fc304b31c..ce37d5b899fe 100644 --- a/arch/xtensa/kernel/traps.c +++ b/arch/xtensa/kernel/traps.c @@ -465,26 +465,25 @@ void show_regs(struct pt_regs * regs) for (i = 0; i < 16; i++) { if ((i % 8) == 0) - printk(KERN_INFO "a%02d:", i); - printk(KERN_CONT " %08lx", regs->areg[i]); + pr_info("a%02d:", i); + pr_cont(" %08lx", regs->areg[i]); } - printk(KERN_CONT "\n"); - - printk("pc: %08lx, ps: %08lx, depc: %08lx, excvaddr: %08lx\n", - regs->pc, regs->ps, regs->depc, regs->excvaddr); - printk("lbeg: %08lx, lend: %08lx lcount: %08lx, sar: %08lx\n", - regs->lbeg, regs->lend, regs->lcount, regs->sar); + pr_cont("\n"); + pr_info("pc: %08lx, ps: %08lx, depc: %08lx, excvaddr: %08lx\n", + regs->pc, regs->ps, regs->depc, regs->excvaddr); + pr_info("lbeg: %08lx, lend: %08lx lcount: %08lx, sar: %08lx\n", + regs->lbeg, regs->lend, regs->lcount, regs->sar); if (user_mode(regs)) - printk("wb: %08lx, ws: %08lx, wmask: %08lx, syscall: %ld\n", - regs->windowbase, regs->windowstart, regs->wmask, - regs->syscall); + pr_cont("wb: %08lx, ws: %08lx, wmask: %08lx, syscall: %ld\n", + regs->windowbase, regs->windowstart, regs->wmask, + regs->syscall); } static int show_trace_cb(struct stackframe *frame, void *data) { if (kernel_text_address(frame->pc)) { - printk(" [<%08lx>] ", frame->pc); - print_symbol("%s\n", frame->pc); + pr_cont(" [<%08lx>]", frame->pc); + print_symbol(" %s\n", frame->pc); } return 0; } @@ -494,19 +493,13 @@ void show_trace(struct task_struct *task, unsigned long *sp) if (!sp) sp = stack_pointer(task); - printk("Call Trace:"); -#ifdef CONFIG_KALLSYMS - printk("\n"); -#endif + pr_info("Call Trace:\n"); walk_stackframe(sp, show_trace_cb, NULL); - printk("\n"); +#ifndef CONFIG_KALLSYMS + pr_cont("\n"); +#endif } -/* - * This routine abuses get_user()/put_user() to reference pointers - * with at least a bit of error checking ... - */ - static int kstack_depth_to_print = 24; void show_stack(struct task_struct *task, unsigned long *sp) @@ -518,52 +511,29 @@ void show_stack(struct task_struct *task, unsigned long *sp) sp = stack_pointer(task); stack = sp; - printk("\nStack: "); + pr_info("Stack:\n"); for (i = 0; i < kstack_depth_to_print; i++) { if (kstack_end(sp)) break; - if (i && ((i % 8) == 0)) - printk("\n "); - printk("%08lx ", *sp++); + pr_cont(" %08lx", *sp++); + if (i % 8 == 7) + pr_cont("\n"); } - printk("\n"); show_trace(task, stack); } -void show_code(unsigned int *pc) -{ - long i; - - printk("\nCode:"); - - for(i = -3 ; i < 6 ; i++) { - unsigned long insn; - if (__get_user(insn, pc + i)) { - printk(" (Bad address in pc)\n"); - break; - } - printk("%c%08lx%c",(i?' ':'<'),insn,(i?' ':'>')); - } -} - DEFINE_SPINLOCK(die_lock); void die(const char * str, struct pt_regs * regs, long err) { static int die_counter; - int nl = 0; console_verbose(); spin_lock_irq(&die_lock); - printk("%s: sig: %ld [#%d]\n", str, err, ++die_counter); -#ifdef CONFIG_PREEMPT - printk("PREEMPT "); - nl = 1; -#endif - if (nl) - printk("\n"); + pr_info("%s: sig: %ld [#%d]%s\n", str, err, ++die_counter, + IS_ENABLED(CONFIG_PREEMPT) ? " PREEMPT" : ""); show_regs(regs); if (!user_mode(regs)) show_stack(NULL, (unsigned long*)regs->areg[1]); From 9a76a3ac3b9b6326a317c59126cdf9e758f85375 Mon Sep 17 00:00:00 2001 From: Jaehoon Chung Date: Mon, 31 Oct 2016 11:49:41 +0900 Subject: [PATCH 379/792] Documentation: synopsys-dw-mshc: add binding for reset-names Add reset-names property for binding dw-mmc controller. It might be used together with "reset" property. - Note: It must be "reset" as name. Fixes: d6786fefe816 ("mmc: dw_mmc: add reset support to dwmmc host controller") Signed-off-by: Jaehoon Chung Acked-by: John Stultz Signed-off-by: Ulf Hansson --- Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt index 4e00e859e885..bfa461aaac99 100644 --- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt @@ -43,6 +43,9 @@ Optional properties: reset signal present internally in some host controller IC designs. See Documentation/devicetree/bindings/reset/reset.txt for details. +* reset-names: request name for using "resets" property. Must be "reset". + (It will be used together with "resets" property.) + * clocks: from common clock binding: handle to biu and ciu clocks for the bus interface unit clock and the card interface unit clock. @@ -103,6 +106,8 @@ board specific portions as listed below. interrupts = <0 75 0>; #address-cells = <1>; #size-cells = <0>; + resets = <&rst 20>; + reset-names = "reset"; }; [board specific internal DMA resources] From 3a667e3ff78ae81afc49343c753864cc1ede2f77 Mon Sep 17 00:00:00 2001 From: Jaehoon Chung Date: Mon, 31 Oct 2016 11:49:42 +0900 Subject: [PATCH 380/792] mmc: dw_mmc: add the "reset" as name of reset controller Add the "reset" as name of reset controller. This is for preventing the wrong operation. Even if some SoC has reset controller, doesn't define "resets" in device-tree. Then it might be waiting for reset controller and it should be stuck. Fixes: d6786fefe816 ("mmc: dw_mmc: add reset support to dwmmc host controller") Signed-off-by: Jaehoon Chung Acked-by: John Stultz Signed-off-by: Ulf Hansson --- drivers/mmc/host/dw_mmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 4fcbc4012ed0..50a674be6655 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -2940,7 +2940,7 @@ static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host) return ERR_PTR(-ENOMEM); /* find reset controller when exist */ - pdata->rstc = devm_reset_control_get_optional(dev, NULL); + pdata->rstc = devm_reset_control_get_optional(dev, "reset"); if (IS_ERR(pdata->rstc)) { if (PTR_ERR(pdata->rstc) == -EPROBE_DEFER) return ERR_PTR(-EPROBE_DEFER); From 355f1a39183467d48f20d90adce3b4aa75c6b260 Mon Sep 17 00:00:00 2001 From: David Lechner Date: Tue, 1 Nov 2016 15:47:04 -0500 Subject: [PATCH 381/792] usb: musb: da8xx: Don't print phy error on -EPROBE_DEFER This suppresses printing the error message "failed to get phy" in the kernel log when the error is -EPROBE_DEFER. This prevents usless noise in the kernel log. Signed-off-by: David Lechner Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/da8xx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c index 210b7e43a6fd..2440f88e07a3 100644 --- a/drivers/usb/musb/da8xx.c +++ b/drivers/usb/musb/da8xx.c @@ -479,7 +479,8 @@ static int da8xx_probe(struct platform_device *pdev) glue->phy = devm_phy_get(&pdev->dev, "usb-phy"); if (IS_ERR(glue->phy)) { - dev_err(&pdev->dev, "failed to get phy\n"); + if (PTR_ERR(glue->phy) != -EPROBE_DEFER) + dev_err(&pdev->dev, "failed to get phy\n"); return PTR_ERR(glue->phy); } From 2e52ec2394fb9486fd496737a84d629b2c992db2 Mon Sep 17 00:00:00 2001 From: Kirill Esipov Date: Tue, 1 Nov 2016 15:47:05 -0500 Subject: [PATCH 382/792] usb: musb: remove duplicated actions Removing unnecessary duplicated actions that we've got while merging: Commit 19915e623458 ("Merge 4.1-rc7 into usb-next") [ b-liu@ti.com: added 'Commit' in the commit message ] Signed-off-by: Kirill Esipov Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 27dadc0d9114..e01116e4c067 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -2114,11 +2114,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) musb->io.ep_offset = musb_flat_ep_offset; musb->io.ep_select = musb_flat_ep_select; } - /* And override them with platform specific ops if specified. */ - if (musb->ops->ep_offset) - musb->io.ep_offset = musb->ops->ep_offset; - if (musb->ops->ep_select) - musb->io.ep_select = musb->ops->ep_select; /* At least tusb6010 has its own offsets */ if (musb->ops->ep_offset) From c289d0eff3d5a594c577c0dc162412a2cad075a4 Mon Sep 17 00:00:00 2001 From: Babu Moger Date: Fri, 21 Oct 2016 15:25:05 -0700 Subject: [PATCH 383/792] drivers/usb: Skip auto handoff for TI and RENESAS usb controllers Never seen XHCI auto handoff working on TI and RENESAS cards. Eventually, we force handoff. This code forces the handoff unconditionally. It saves 5 seconds boot time for each card. Signed-off-by: Babu Moger Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/pci-quirks.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index d793f548dfe2..a9a1e4c40480 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -995,6 +995,14 @@ static void quirk_usb_handoff_xhci(struct pci_dev *pdev) } val = readl(base + ext_cap_offset); + /* Auto handoff never worked for these devices. Force it and continue */ + if ((pdev->vendor == PCI_VENDOR_ID_TI && pdev->device == 0x8241) || + (pdev->vendor == PCI_VENDOR_ID_RENESAS + && pdev->device == 0x0014)) { + val = (val | XHCI_HC_OS_OWNED) & ~XHCI_HC_BIOS_OWNED; + writel(val, base + ext_cap_offset); + } + /* If the BIOS owns the HC, signal that the OS wants it, and wait */ if (val & XHCI_HC_BIOS_OWNED) { writel(val | XHCI_HC_OS_OWNED, base + ext_cap_offset); From 7309aa847ead3fa561663b16779a0dde8c64cc7c Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Wed, 2 Nov 2016 14:42:52 +0100 Subject: [PATCH 384/792] cdc-acm: fix uninitialized variable variable struct usb_cdc_parsed_header h may be used uninitialized in acm_probe. In kernel 4.8. /* handle quirks deadly to normal probing*/ if (quirks == NO_UNION_NORMAL) ... goto skip_normal_probe; } we bypass call to cdc_parse_cdc_header(&h, intf, buffer, buflen); but later use h in if (h.usb_cdc_country_functional_desc) { /* export the country data */ Signed-off-by: Oliver Neukum CC: stable@vger.kernel.org Reported-by: Victor Sologoubov Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 78f0f85bebdc..4ad4ca44058b 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1161,6 +1161,8 @@ static int acm_probe(struct usb_interface *intf, if (quirks == IGNORE_DEVICE) return -ENODEV; + memset(&h, 0x00, sizeof(struct usb_cdc_parsed_header)); + num_rx_buf = (quirks == SINGLE_RX_URB) ? 1 : ACM_NR; /* handle quirks deadly to normal probing*/ From 33c027ae3cfd8fefb6cccccc5c6b2c07d80891ce Mon Sep 17 00:00:00 2001 From: Huacai Chen Date: Thu, 3 Nov 2016 12:48:43 +0800 Subject: [PATCH 385/792] staging: sm750fb: Fix bugs introduced by early commits Early commit 30ca5cb63c56965 ("staging: sm750fb: change definition of PANEL_PLANE_TL fields") and 27b047bbe1ee9c0 ("staging: sm750fb: change definition of PANEL_PLANE_BR fields") modify the register bit fields definitions. But the modifications are wrong, because the bit mask of "bit field 10:0" is not 0xeff, but 0x7ff. The wrong definition bugs makes display very strange. Signed-off-by: Huacai Chen Cc: stable # 4.6+ Signed-off-by: Greg Kroah-Hartman --- drivers/staging/sm750fb/ddk750_reg.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/staging/sm750fb/ddk750_reg.h b/drivers/staging/sm750fb/ddk750_reg.h index 955247979aaa..4ed6d8d7712a 100644 --- a/drivers/staging/sm750fb/ddk750_reg.h +++ b/drivers/staging/sm750fb/ddk750_reg.h @@ -601,13 +601,13 @@ #define PANEL_PLANE_TL 0x08001C #define PANEL_PLANE_TL_TOP_SHIFT 16 -#define PANEL_PLANE_TL_TOP_MASK (0xeff << 16) -#define PANEL_PLANE_TL_LEFT_MASK 0xeff +#define PANEL_PLANE_TL_TOP_MASK (0x7ff << 16) +#define PANEL_PLANE_TL_LEFT_MASK 0x7ff #define PANEL_PLANE_BR 0x080020 #define PANEL_PLANE_BR_BOTTOM_SHIFT 16 -#define PANEL_PLANE_BR_BOTTOM_MASK (0xeff << 16) -#define PANEL_PLANE_BR_RIGHT_MASK 0xeff +#define PANEL_PLANE_BR_BOTTOM_MASK (0x7ff << 16) +#define PANEL_PLANE_BR_RIGHT_MASK 0x7ff #define PANEL_HORIZONTAL_TOTAL 0x080024 #define PANEL_HORIZONTAL_TOTAL_TOTAL_SHIFT 16 From a33547cc764ca994d27a8fcc5fc61fbf4b2f7361 Mon Sep 17 00:00:00 2001 From: Andrew Jeffery Date: Thu, 3 Nov 2016 01:07:56 +1030 Subject: [PATCH 386/792] pinctrl-aspeed-g5: Never set SCU90[6] MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If a pin depending on bit 6 in SCU90 is requested for GPIO, the export will succeed but changes to the GPIO's value will not be accepted by the hardware. This is because the pinmux driver has misconfigured the SCU by writing 1 to the reserved bit. The description of SCU90[6] from the datasheet is 'Reserved, must keep at value ”0”'. The fix is to switch pinmux from the bit-flipping macro to explicitly configuring the .enable and .disable values to zero. The patch has been tested on an AST2500 EVB. Fixes: 56e57cb6c07f (pinctrl: Add pinctrl-aspeed-g5 driver) Reported-by: Uma Yadlapati Signed-off-by: Andrew Jeffery Reviewed-by: Joel Stanley Signed-off-by: Linus Walleij --- drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c index c8c72e8259d3..87b46390b695 100644 --- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c +++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c @@ -26,7 +26,7 @@ #define ASPEED_G5_NR_PINS 228 -#define COND1 SIG_DESC_BIT(SCU90, 6, 0) +#define COND1 { SCU90, BIT(6), 0, 0 } #define COND2 { SCU94, GENMASK(1, 0), 0, 0 } #define B14 0 From 55abe8165f31ffb83ce8b24da959b61362dca4c4 Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Thu, 27 Oct 2016 20:28:36 +0100 Subject: [PATCH 387/792] staging: comedi: ni_tio: fix buggy ni_tio_clock_period_ps() return value `ni_tio_clock_period_ps()` used to return the clock period in picoseconds, and had a `BUG()` call for invalid cases. It was changed to pass the clock period back via a pointer parameter and return an error for the invalid cases. Unfortunately the code to handle user-specified clock sources with user-specified clock period is still returning the clock period the old way, which can lead to the caller not getting the clock period, or seeing an unexpected error. Fix it by passing the clock period via the pointer parameter and returning `0`. Fixes: b42ca86ad605 ("staging: comedi: ni_tio: remove BUG() checks for ni_tio_get_clock_src()") Signed-off-by: Ian Abbott Cc: # 4.7+ Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/ni_tio.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/staging/comedi/drivers/ni_tio.c b/drivers/staging/comedi/drivers/ni_tio.c index 7043eb0543f6..5ab49a798164 100644 --- a/drivers/staging/comedi/drivers/ni_tio.c +++ b/drivers/staging/comedi/drivers/ni_tio.c @@ -207,7 +207,8 @@ static int ni_tio_clock_period_ps(const struct ni_gpct *counter, * clock period is specified by user with prescaling * already taken into account. */ - return counter->clock_period_ps; + *period_ps = counter->clock_period_ps; + return 0; } switch (generic_clock_source & NI_GPCT_PRESCALE_MODE_CLOCK_SRC_MASK) { From d9966f1de990577b49903061cfcea2d1e85353fb Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 1 Nov 2016 11:55:02 +0100 Subject: [PATCH 388/792] staging: greybus: arche-platform: fix device reference leak Make sure to drop the device reference taken by of_find_device_by_node() before returning from arche_platform_change_state(). Note that this code is expected to be removed, but let's fix up the leak nonetheless. Fixes: 886aba558b9e ("greybus: arche-platform: Export fn to allow...") Signed-off-by: Johan Hovold Acked-by: Viresh Kumar Reviewed-by: Vaibhav Hiremath Signed-off-by: Greg Kroah-Hartman --- drivers/staging/greybus/arche-platform.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/staging/greybus/arche-platform.c b/drivers/staging/greybus/arche-platform.c index 34307ac3f255..d33d6fe078ad 100644 --- a/drivers/staging/greybus/arche-platform.c +++ b/drivers/staging/greybus/arche-platform.c @@ -186,6 +186,7 @@ int arche_platform_change_state(enum arche_platform_state state, exit: spin_unlock_irqrestore(&arche_pdata->wake_lock, flags); mutex_unlock(&arche_pdata->platform_state_mutex); + put_device(&pdev->dev); of_node_put(np); return ret; } From d8f8a74d5fece355d2234e1731231d1aebc66b38 Mon Sep 17 00:00:00 2001 From: Paul Fertser Date: Thu, 27 Oct 2016 17:22:08 +0300 Subject: [PATCH 389/792] drivers: staging: nvec: remove bogus reset command for PS/2 interface This command was sent behind serio's back and the answer to it was confusing atkbd probe function which lead to the elantech touchpad getting detected as a keyboard. To prevent this from happening just let every party do its part of the job. Signed-off-by: Paul Fertser Acked-by: Marc Dietrich Cc: stable # 3.4+ Signed-off-by: Greg Kroah-Hartman --- drivers/staging/nvec/nvec_ps2.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/staging/nvec/nvec_ps2.c b/drivers/staging/nvec/nvec_ps2.c index a324322ee0ad..d63c4efa8074 100644 --- a/drivers/staging/nvec/nvec_ps2.c +++ b/drivers/staging/nvec/nvec_ps2.c @@ -106,7 +106,6 @@ static int nvec_mouse_probe(struct platform_device *pdev) { struct nvec_chip *nvec = dev_get_drvdata(pdev->dev.parent); struct serio *ser_dev; - char mouse_reset[] = { NVEC_PS2, SEND_COMMAND, PSMOUSE_RST, 3 }; ser_dev = devm_kzalloc(&pdev->dev, sizeof(struct serio), GFP_KERNEL); if (!ser_dev) @@ -127,9 +126,6 @@ static int nvec_mouse_probe(struct platform_device *pdev) serio_register_port(ser_dev); - /* mouse reset */ - nvec_write_async(nvec, mouse_reset, sizeof(mouse_reset)); - return 0; } From 17c1c9ba15b238ef79b51cf40d855c05b58d5934 Mon Sep 17 00:00:00 2001 From: Paul Fertser Date: Thu, 27 Oct 2016 17:22:09 +0300 Subject: [PATCH 390/792] Revert "staging: nvec: ps2: change serio type to passthrough" This reverts commit 36b30d6138f4677514aca35ab76c20c1604baaad. This is necessary to detect paz00 (ac100) touchpad properly as one speaking ETPS/2 protocol. Without it X.org's synaptics driver doesn't work as the touchpad is detected as an ImPS/2 mouse instead. Commit ec6184b1c717b8768122e25fe6d312f609cc1bb4 changed the way auto-detection is performed on ports marked as pass through and made the issue apparent. A pass through port is an additional PS/2 port used to connect a slave device to a master device that is using PS/2 to communicate with the host (so slave's PS/2 communication is tunneled over master's PS/2 link). "Synaptics PS/2 TouchPad Interfacing Guide" describes such a setup (PS/2 PASS-THROUGH OPTION section). Since paz00's embedded controller is not connected to a PS/2 port itself, the PS/2 interface it exposes is not a pass-through one. Signed-off-by: Paul Fertser Acked-by: Marc Dietrich Fixes: 36b30d6138f4 ("staging: nvec: ps2: change serio type to passthrough") Cc: stable # 3.4+ Signed-off-by: Greg Kroah-Hartman --- drivers/staging/nvec/nvec_ps2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/nvec/nvec_ps2.c b/drivers/staging/nvec/nvec_ps2.c index d63c4efa8074..910e87b761e7 100644 --- a/drivers/staging/nvec/nvec_ps2.c +++ b/drivers/staging/nvec/nvec_ps2.c @@ -111,7 +111,7 @@ static int nvec_mouse_probe(struct platform_device *pdev) if (!ser_dev) return -ENOMEM; - ser_dev->id.type = SERIO_PS_PSTHRU; + ser_dev->id.type = SERIO_8042; ser_dev->write = ps2_sendcommand; ser_dev->start = ps2_startstreaming; ser_dev->stop = ps2_stopstreaming; From 68fae2f3df455f53d0dfe33483a49020b3b758f3 Mon Sep 17 00:00:00 2001 From: Marc Dietrich Date: Tue, 1 Nov 2016 13:59:40 +0100 Subject: [PATCH 391/792] staging: nvec: remove managed resource from PS2 driver This basicly reverts commit e534f3e9 (staging:nvec: Introduce the use of the managed version of kzalloc). Serio struct should never by managed because it is refcounted. Doing so will lead to a double free oops on module remove. Signed-off-by: Marc Dietrich Fixes: e534f3e9429f ("staging:nvec: Introduce the use of the managed version of kzalloc") Cc: stable # 3.15+ Signed-off-by: Greg Kroah-Hartman --- drivers/staging/nvec/nvec_ps2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/nvec/nvec_ps2.c b/drivers/staging/nvec/nvec_ps2.c index 910e87b761e7..499952c8ef39 100644 --- a/drivers/staging/nvec/nvec_ps2.c +++ b/drivers/staging/nvec/nvec_ps2.c @@ -107,7 +107,7 @@ static int nvec_mouse_probe(struct platform_device *pdev) struct nvec_chip *nvec = dev_get_drvdata(pdev->dev.parent); struct serio *ser_dev; - ser_dev = devm_kzalloc(&pdev->dev, sizeof(struct serio), GFP_KERNEL); + ser_dev = kzalloc(sizeof(struct serio), GFP_KERNEL); if (!ser_dev) return -ENOMEM; From e8a6123e9ead1b0d40349809e51de9341312fe08 Mon Sep 17 00:00:00 2001 From: Lukas Wunner Date: Sun, 23 Oct 2016 13:55:34 +0200 Subject: [PATCH 392/792] x86/platform/intel-mid: Retrofit pci_platform_pm_ops ->get_state hook Commit cc7cc02bada8 ("PCI: Query platform firmware for device power state") augmented struct pci_platform_pm_ops with a ->get_state hook and implemented it for acpi_pci_platform_pm, the only pci_platform_pm_ops existing till v4.7. However v4.8 introduced another pci_platform_pm_ops for Intel Mobile Internet Devices with commit 5823d0893ec2 ("x86/platform/intel-mid: Add Power Management Unit driver"). It is missing the ->get_state hook, which is fatal since pci_set_platform_pm() enforces its presence. Andy Shevchenko reports that without the present commit, such a device "crashes without even a character printed out on serial console and reboots (since watchdog)". Retrofit mid_pci_platform_pm with the missing callback to fix the breakage. Acked-and-tested-by: Andy Shevchenko Fixes: cc7cc02bada8 ("PCI: Query platform firmware for device power state") Signed-off-by: Lukas Wunner Acked-by: Bjorn Helgaas Cc: linux-pci@vger.kernel.org Cc: Andy Shevchenko Link: http://lkml.kernel.org/r/7c1567d4c49303a4aada94ba16275cbf56b8976b.1477221514.git.lukas@wunner.de Signed-off-by: Thomas Gleixner --- arch/x86/include/asm/intel-mid.h | 1 + arch/x86/platform/intel-mid/pwr.c | 19 +++++++++++++++++++ drivers/pci/pci-mid.c | 6 ++++++ 3 files changed, 26 insertions(+) diff --git a/arch/x86/include/asm/intel-mid.h b/arch/x86/include/asm/intel-mid.h index 5b6753d1f7f4..49da9f497b90 100644 --- a/arch/x86/include/asm/intel-mid.h +++ b/arch/x86/include/asm/intel-mid.h @@ -17,6 +17,7 @@ extern int intel_mid_pci_init(void); extern int intel_mid_pci_set_power_state(struct pci_dev *pdev, pci_power_t state); +extern pci_power_t intel_mid_pci_get_power_state(struct pci_dev *pdev); extern void intel_mid_pwr_power_off(void); diff --git a/arch/x86/platform/intel-mid/pwr.c b/arch/x86/platform/intel-mid/pwr.c index 5d3b45ad1c03..67375dda451c 100644 --- a/arch/x86/platform/intel-mid/pwr.c +++ b/arch/x86/platform/intel-mid/pwr.c @@ -272,6 +272,25 @@ int intel_mid_pci_set_power_state(struct pci_dev *pdev, pci_power_t state) } EXPORT_SYMBOL_GPL(intel_mid_pci_set_power_state); +pci_power_t intel_mid_pci_get_power_state(struct pci_dev *pdev) +{ + struct mid_pwr *pwr = midpwr; + int id, reg, bit; + u32 power; + + if (!pwr || !pwr->available) + return PCI_UNKNOWN; + + id = intel_mid_pwr_get_lss_id(pdev); + if (id < 0) + return PCI_UNKNOWN; + + reg = (id * LSS_PWS_BITS) / 32; + bit = (id * LSS_PWS_BITS) % 32; + power = mid_pwr_get_state(pwr, reg); + return (__force pci_power_t)((power >> bit) & 3); +} + void intel_mid_pwr_power_off(void) { struct mid_pwr *pwr = midpwr; diff --git a/drivers/pci/pci-mid.c b/drivers/pci/pci-mid.c index 55f453de562e..c7f3408e3148 100644 --- a/drivers/pci/pci-mid.c +++ b/drivers/pci/pci-mid.c @@ -29,6 +29,11 @@ static int mid_pci_set_power_state(struct pci_dev *pdev, pci_power_t state) return intel_mid_pci_set_power_state(pdev, state); } +static pci_power_t mid_pci_get_power_state(struct pci_dev *pdev) +{ + return intel_mid_pci_get_power_state(pdev); +} + static pci_power_t mid_pci_choose_state(struct pci_dev *pdev) { return PCI_D3hot; @@ -52,6 +57,7 @@ static bool mid_pci_need_resume(struct pci_dev *dev) static struct pci_platform_pm_ops mid_pci_platform_pm = { .is_manageable = mid_pci_power_manageable, .set_state = mid_pci_set_power_state, + .get_state = mid_pci_get_power_state, .choose_state = mid_pci_choose_state, .sleep_wake = mid_pci_sleep_wake, .run_wake = mid_pci_run_wake, From 6ebebeab5185f50d55c6a24d0abe47e5dac1b191 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Wed, 2 Nov 2016 15:49:08 +0200 Subject: [PATCH 393/792] mmc: sdhci: Fix CMD line reset interfering with ongoing data transfer CMD line reset during an ongoing data transfer can cause the data transfer to hang. Fix by delaying the reset until the data transfer is finished. Signed-off-by: Adrian Hunter Cc: stable@vger.kernel.org # v4.8+ Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci.c | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 71654b90227f..fd0f24cddad4 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -2286,10 +2286,8 @@ static bool sdhci_request_done(struct sdhci_host *host) for (i = 0; i < SDHCI_MAX_MRQS; i++) { mrq = host->mrqs_done[i]; - if (mrq) { - host->mrqs_done[i] = NULL; + if (mrq) break; - } } if (!mrq) { @@ -2320,6 +2318,17 @@ static bool sdhci_request_done(struct sdhci_host *host) * upon error conditions. */ if (sdhci_needs_reset(host, mrq)) { + /* + * Do not finish until command and data lines are available for + * reset. Note there can only be one other mrq, so it cannot + * also be in mrqs_done, otherwise host->cmd and host->data_cmd + * would both be null. + */ + if (host->cmd || host->data_cmd) { + spin_unlock_irqrestore(&host->lock, flags); + return true; + } + /* Some controllers need this kick or reset won't work here */ if (host->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET) /* This is to force an update */ @@ -2327,10 +2336,8 @@ static bool sdhci_request_done(struct sdhci_host *host) /* Spec says we should do both at the same time, but Ricoh controllers do not like that. */ - if (!host->cmd) - sdhci_do_reset(host, SDHCI_RESET_CMD); - if (!host->data_cmd) - sdhci_do_reset(host, SDHCI_RESET_DATA); + sdhci_do_reset(host, SDHCI_RESET_CMD); + sdhci_do_reset(host, SDHCI_RESET_DATA); host->pending_reset = false; } @@ -2338,6 +2345,8 @@ static bool sdhci_request_done(struct sdhci_host *host) if (!sdhci_has_requests(host)) sdhci_led_deactivate(host); + host->mrqs_done[i] = NULL; + mmiowb(); spin_unlock_irqrestore(&host->lock, flags); From 69b962a65a547690a356f9f76bc4f53db538ac49 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Wed, 2 Nov 2016 15:49:09 +0200 Subject: [PATCH 394/792] mmc: sdhci: Fix unexpected data interrupt handling In the busy response case (i.e. !host->data), an unexpected data interrupt would result in clearing the data command as though it had completed but without informing the upper layers and thus resulting in a hang. Fix by only clearing the data command for data interrupts that are expected. Signed-off-by: Adrian Hunter Cc: stable@vger.kernel.org # v4.8+ Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index fd0f24cddad4..0dd3c31e23bb 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -2521,9 +2521,6 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask) if (!host->data) { struct mmc_command *data_cmd = host->data_cmd; - if (data_cmd) - host->data_cmd = NULL; - /* * The "data complete" interrupt is also used to * indicate that a busy state has ended. See comment @@ -2531,11 +2528,13 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask) */ if (data_cmd && (data_cmd->flags & MMC_RSP_BUSY)) { if (intmask & SDHCI_INT_DATA_TIMEOUT) { + host->data_cmd = NULL; data_cmd->error = -ETIMEDOUT; sdhci_finish_mrq(host, data_cmd->mrq); return; } if (intmask & SDHCI_INT_DATA_END) { + host->data_cmd = NULL; /* * Some cards handle busy-end interrupt * before the command completed, so make From fe5fb2e3b58f866f82a80fe7c7866ea6d0b306b9 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Wed, 2 Nov 2016 15:49:10 +0200 Subject: [PATCH 395/792] mmc: sdhci: Reset cmd and data circuits after tuning failure To prevent subsequent commands failing, ensure the cmd and data circuits are reset after a tuning timeout. Signed-off-by: Adrian Hunter Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 0dd3c31e23bb..542aabc48032 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -2086,6 +2086,10 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode) if (!host->tuning_done) { pr_info(DRIVER_NAME ": Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock\n"); + + sdhci_do_reset(host, SDHCI_RESET_CMD); + sdhci_do_reset(host, SDHCI_RESET_DATA); + ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); ctrl &= ~SDHCI_CTRL_TUNED_CLK; ctrl &= ~SDHCI_CTRL_EXEC_TUNING; From 086b0ddbeff5317026417c29752129d28a216c66 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Wed, 2 Nov 2016 15:49:11 +0200 Subject: [PATCH 396/792] mmc: sdhci: Fix missing enhanced strobe setting during runtime resume Restore enhanced strobe setting during runtime resume. Signed-off-by: Adrian Hunter Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 542aabc48032..42ef3ebb1d8c 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -2924,6 +2924,10 @@ int sdhci_runtime_resume_host(struct sdhci_host *host) spin_unlock_irqrestore(&host->lock, flags); } + if ((mmc->caps2 & MMC_CAP2_HS400_ES) && + mmc->ops->hs400_enhanced_strobe) + mmc->ops->hs400_enhanced_strobe(mmc, &mmc->ios); + spin_lock_irqsave(&host->lock, flags); host->runtime_suspended = false; From be55f7bee39ed019713c5a1e930214e6d744fe0f Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Fri, 4 Nov 2016 13:41:05 +0200 Subject: [PATCH 397/792] mmc: mmc_test: Fix "Commands during non-blocking write" tests mmc_test_check_result_async() requires that struct mmc_async_req is contained within struct mmc_test_async_req. Fix the "Commands during non-blocking write" tests so that is the case. Fixes: 4bbb9aac9a9a ("mmc: mmc_test: Add tests for sending commands during transfer") Signed-off-by: Adrian Hunter Tested-by: Ritesh Harjani Signed-off-by: Ulf Hansson --- drivers/mmc/card/mmc_test.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c index 5a8dc5a76e0d..3678220964fe 100644 --- a/drivers/mmc/card/mmc_test.c +++ b/drivers/mmc/card/mmc_test.c @@ -2347,7 +2347,7 @@ static int mmc_test_ongoing_transfer(struct mmc_test_card *test, struct mmc_test_req *rq = mmc_test_req_alloc(); struct mmc_host *host = test->card->host; struct mmc_test_area *t = &test->area; - struct mmc_async_req areq; + struct mmc_test_async_req test_areq = { .test = test }; struct mmc_request *mrq; unsigned long timeout; bool expired = false; @@ -2363,8 +2363,8 @@ static int mmc_test_ongoing_transfer(struct mmc_test_card *test, mrq->sbc = &rq->sbc; mrq->cap_cmd_during_tfr = true; - areq.mrq = mrq; - areq.err_check = mmc_test_check_result_async; + test_areq.areq.mrq = mrq; + test_areq.areq.err_check = mmc_test_check_result_async; mmc_test_prepare_mrq(test, mrq, t->sg, t->sg_len, dev_addr, t->blocks, 512, write); @@ -2378,7 +2378,7 @@ static int mmc_test_ongoing_transfer(struct mmc_test_card *test, /* Start ongoing data request */ if (use_areq) { - mmc_start_req(host, &areq, &ret); + mmc_start_req(host, &test_areq.areq, &ret); if (ret) goto out_free; } else { From fe1b5700c70faac6e027982d59667bc6020de5a8 Mon Sep 17 00:00:00 2001 From: Ulf Hansson Date: Fri, 4 Nov 2016 18:32:33 +0100 Subject: [PATCH 398/792] mmc: mmc: Use 500ms as the default generic CMD6 timeout In the eMMC 4.51 version of the spec, an EXT_CSD field called GENERIC_CMD6_TIME[248] was added. This allows cards to specify the maximum time it may need to move out from its busy state, when a CMD6 command has been sent. In cases when the card is compliant to versions < 4.51 of the eMMC spec, obviously the core needs to use a fall-back value for this timeout, which currently is set to 10 minutes. This value is completely in the wrong range and importantly in some cases it causes a card initialization to take more than 10 minute to complete. Earlier this scenario was avoided as the mmc core used CMD13 to poll the card, to find out when it stopped signaling busy. Commit 08573eaf1a70 ("mmc: mmc: do not use CMD13 to get status after speed mode switch") changed this behavior. Instead of reverting that commit, which would cause other issues, let's instead start by picking a simple solution for the problem, by using a 500ms default generic CMD6 timeout. The reason for using exactly 500ms, comes from observations that shows it's quite common for cards to specify 250ms. 500ms is two times that value so likely it should be enough for most cards. Cc: # v4.8+ Fixes: 08573eaf1a70 ("mmc: mmc: do not use CMD13 to get status after speed mode switch") Signed-off-by: Ulf Hansson Tested-by: Stephen Boyd Tested-by: Linus Walleij --- drivers/mmc/core/mmc.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 39fc5b2b96c5..df19777068a6 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -26,6 +26,8 @@ #include "mmc_ops.h" #include "sd_ops.h" +#define DEFAULT_CMD6_TIMEOUT_MS 500 + static const unsigned int tran_exp[] = { 10000, 100000, 1000000, 10000000, 0, 0, 0, 0 @@ -571,6 +573,7 @@ static int mmc_decode_ext_csd(struct mmc_card *card, u8 *ext_csd) card->erased_byte = 0x0; /* eMMC v4.5 or later */ + card->ext_csd.generic_cmd6_time = DEFAULT_CMD6_TIMEOUT_MS; if (card->ext_csd.rev >= 6) { card->ext_csd.feature_support |= MMC_DISCARD_FEATURE; From f91346e8b5f46aaf12f1df26e87140584ffd1b3f Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sat, 5 Nov 2016 17:45:07 -0200 Subject: [PATCH 399/792] mmc: mxs: Initialize the spinlock prior to using it An interrupt may occur right after devm_request_irq() is called and prior to the spinlock initialization, leading to a kernel oops, as the interrupt handler uses the spinlock. In order to prevent this problem, move the spinlock initialization prior to requesting the interrupts. Fixes: e4243f13d10e (mmc: mxs-mmc: add mmc host driver for i.MX23/28) Signed-off-by: Fabio Estevam Reviewed-by: Marek Vasut Signed-off-by: Ulf Hansson --- drivers/mmc/host/mxs-mmc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c index d839147e591d..44ecebd1ea8c 100644 --- a/drivers/mmc/host/mxs-mmc.c +++ b/drivers/mmc/host/mxs-mmc.c @@ -661,13 +661,13 @@ static int mxs_mmc_probe(struct platform_device *pdev) platform_set_drvdata(pdev, mmc); + spin_lock_init(&host->lock); + ret = devm_request_irq(&pdev->dev, irq_err, mxs_mmc_irq_handler, 0, dev_name(&pdev->dev), host); if (ret) goto out_free_dma; - spin_lock_init(&host->lock); - ret = mmc_add_host(mmc); if (ret) goto out_free_dma; From 4db069a2bf990e278ea57ff615dcaa89b85376bd Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Fri, 4 Nov 2016 07:13:52 +0100 Subject: [PATCH 400/792] drm/sun4i: Propagate error to the caller If 'sun4i_layers_init()' returns an error, propagate it instead of returning -EINVAL unconditionally. Signed-off-by: Christophe JAILLET Reviewed-by: Gustavo Padovan Signed-off-by: Maxime Ripard --- drivers/gpu/drm/sun4i/sun4i_drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/sun4i/sun4i_drv.c b/drivers/gpu/drm/sun4i/sun4i_drv.c index 077f3785439e..70e9fd59c5a2 100644 --- a/drivers/gpu/drm/sun4i/sun4i_drv.c +++ b/drivers/gpu/drm/sun4i/sun4i_drv.c @@ -144,7 +144,7 @@ static int sun4i_drv_bind(struct device *dev) drv->layers = sun4i_layers_init(drm); if (IS_ERR(drv->layers)) { dev_err(drm->dev, "Couldn't create the planes\n"); - ret = -EINVAL; + ret = PTR_ERR(drv->layers); goto free_drm; } From dc0336214eb07ee9de2a41dd4c81c744ffa419ac Mon Sep 17 00:00:00 2001 From: Mike Marshall Date: Fri, 4 Nov 2016 16:32:25 -0400 Subject: [PATCH 401/792] orangefs: clean up debugfs We recently refactored the Orangefs debugfs code. The refactor seemed to trigger dan.carpenter@oracle.com's static tester to find a possible double-free in the code. While designing the fix we saw a condition under which the buffer being freed could also be overflowed. We also realized how to rebuild the related debugfs file's "contents" (a string) without deleting and re-creating the file. This fix should eliminate the possible double-free, the potential overflow and improve code readability. Signed-off-by: Mike Marshall Signed-off-by: Martin Brandenburg --- fs/orangefs/orangefs-debugfs.c | 147 ++++++++++++++------------------- fs/orangefs/orangefs-mod.c | 6 +- 2 files changed, 68 insertions(+), 85 deletions(-) diff --git a/fs/orangefs/orangefs-debugfs.c b/fs/orangefs/orangefs-debugfs.c index eb09aa026723..d484068ca716 100644 --- a/fs/orangefs/orangefs-debugfs.c +++ b/fs/orangefs/orangefs-debugfs.c @@ -141,6 +141,9 @@ static struct client_debug_mask client_debug_mask; */ static DEFINE_MUTEX(orangefs_debug_lock); +/* Used to protect data in ORANGEFS_KMOD_DEBUG_HELP_FILE */ +static DEFINE_MUTEX(orangefs_help_file_lock); + /* * initialize kmod debug operations, create orangefs debugfs dir and * ORANGEFS_KMOD_DEBUG_HELP_FILE. @@ -289,6 +292,8 @@ static void *help_start(struct seq_file *m, loff_t *pos) gossip_debug(GOSSIP_DEBUGFS_DEBUG, "help_start: start\n"); + mutex_lock(&orangefs_help_file_lock); + if (*pos == 0) payload = m->private; @@ -305,6 +310,7 @@ static void *help_next(struct seq_file *m, void *v, loff_t *pos) static void help_stop(struct seq_file *m, void *p) { gossip_debug(GOSSIP_DEBUGFS_DEBUG, "help_stop: start\n"); + mutex_unlock(&orangefs_help_file_lock); } static int help_show(struct seq_file *m, void *v) @@ -610,32 +616,54 @@ out: * /sys/kernel/debug/orangefs/debug-help can be catted to * see all the available kernel and client debug keywords. * - * When the kernel boots, we have no idea what keywords the + * When orangefs.ko initializes, we have no idea what keywords the * client supports, nor their associated masks. * - * We pass through this function once at boot and stamp a + * We pass through this function once at module-load and stamp a * boilerplate "we don't know" message for the client in the * debug-help file. We pass through here again when the client * starts and then we can fill out the debug-help file fully. * * The client might be restarted any number of times between - * reboots, we only build the debug-help file the first time. + * module reloads, we only build the debug-help file the first time. */ int orangefs_prepare_debugfs_help_string(int at_boot) { - int rc = -EINVAL; - int i; - int byte_count = 0; char *client_title = "Client Debug Keywords:\n"; char *kernel_title = "Kernel Debug Keywords:\n"; + size_t string_size = DEBUG_HELP_STRING_SIZE; + size_t result_size; + size_t i; + char *new; + int rc = -EINVAL; gossip_debug(GOSSIP_UTILS_DEBUG, "%s: start\n", __func__); - if (at_boot) { - byte_count += strlen(HELP_STRING_UNINITIALIZED); + if (at_boot) client_title = HELP_STRING_UNINITIALIZED; - } else { - /* + + /* build a new debug_help_string. */ + new = kzalloc(DEBUG_HELP_STRING_SIZE, GFP_KERNEL); + if (!new) { + rc = -ENOMEM; + goto out; + } + + /* + * strlcat(dst, src, size) will append at most + * "size - strlen(dst) - 1" bytes of src onto dst, + * null terminating the result, and return the total + * length of the string it tried to create. + * + * We'll just plow through here building our new debug + * help string and let strlcat take care of assuring that + * dst doesn't overflow. + */ + strlcat(new, client_title, string_size); + + if (!at_boot) { + + /* * fill the client keyword/mask array and remember * how many elements there were. */ @@ -644,64 +672,40 @@ int orangefs_prepare_debugfs_help_string(int at_boot) if (cdm_element_count <= 0) goto out; - /* Count the bytes destined for debug_help_string. */ - byte_count += strlen(client_title); - for (i = 0; i < cdm_element_count; i++) { - byte_count += strlen(cdm_array[i].keyword + 2); - if (byte_count >= DEBUG_HELP_STRING_SIZE) { - pr_info("%s: overflow 1!\n", __func__); - goto out; - } + strlcat(new, "\t", string_size); + strlcat(new, cdm_array[i].keyword, string_size); + strlcat(new, "\n", string_size); } - - gossip_debug(GOSSIP_UTILS_DEBUG, - "%s: cdm_element_count:%d:\n", - __func__, - cdm_element_count); } - byte_count += strlen(kernel_title); + strlcat(new, "\n", string_size); + strlcat(new, kernel_title, string_size); + for (i = 0; i < num_kmod_keyword_mask_map; i++) { - byte_count += - strlen(s_kmod_keyword_mask_map[i].keyword + 2); - if (byte_count >= DEBUG_HELP_STRING_SIZE) { - pr_info("%s: overflow 2!\n", __func__); - goto out; - } + strlcat(new, "\t", string_size); + strlcat(new, s_kmod_keyword_mask_map[i].keyword, string_size); + result_size = strlcat(new, "\n", string_size); } - /* build debug_help_string. */ - debug_help_string = kzalloc(DEBUG_HELP_STRING_SIZE, GFP_KERNEL); - if (!debug_help_string) { - rc = -ENOMEM; + /* See if we tried to put too many bytes into "new"... */ + if (result_size >= string_size) { + kfree(new); goto out; } - strcat(debug_help_string, client_title); - - if (!at_boot) { - for (i = 0; i < cdm_element_count; i++) { - strcat(debug_help_string, "\t"); - strcat(debug_help_string, cdm_array[i].keyword); - strcat(debug_help_string, "\n"); - } - } - - strcat(debug_help_string, "\n"); - strcat(debug_help_string, kernel_title); - - for (i = 0; i < num_kmod_keyword_mask_map; i++) { - strcat(debug_help_string, "\t"); - strcat(debug_help_string, s_kmod_keyword_mask_map[i].keyword); - strcat(debug_help_string, "\n"); + if (at_boot) { + debug_help_string = new; + } else { + mutex_lock(&orangefs_help_file_lock); + memset(debug_help_string, 0, DEBUG_HELP_STRING_SIZE); + strlcat(debug_help_string, new, string_size); + mutex_unlock(&orangefs_help_file_lock); } rc = 0; -out: - - return rc; +out: return rc; } @@ -959,8 +963,12 @@ int orangefs_debugfs_new_client_string(void __user *arg) ret = copy_from_user(&client_debug_array_string, (void __user *)arg, ORANGEFS_MAX_DEBUG_STRING_LEN); - if (ret != 0) + + if (ret != 0) { + pr_info("%s: CLIENT_STRING: copy_from_user failed\n", + __func__); return -EIO; + } /* * The real client-core makes an effort to ensure @@ -975,45 +983,18 @@ int orangefs_debugfs_new_client_string(void __user *arg) client_debug_array_string[ORANGEFS_MAX_DEBUG_STRING_LEN - 1] = '\0'; - if (ret != 0) { - pr_info("%s: CLIENT_STRING: copy_from_user failed\n", - __func__); - return -EIO; - } - pr_info("%s: client debug array string has been received.\n", __func__); if (!help_string_initialized) { - /* Free the "we don't know yet" default string... */ - kfree(debug_help_string); - - /* build a proper debug help string */ + /* Build a proper debug help string. */ if (orangefs_prepare_debugfs_help_string(0)) { gossip_err("%s: no debug help string \n", __func__); return -EIO; } - /* Replace the boilerplate boot-time debug-help file. */ - debugfs_remove(help_file_dentry); - - help_file_dentry = - debugfs_create_file( - ORANGEFS_KMOD_DEBUG_HELP_FILE, - 0444, - debug_dir, - debug_help_string, - &debug_help_fops); - - if (!help_file_dentry) { - gossip_err("%s: debugfs_create_file failed for" - " :%s:!\n", - __func__, - ORANGEFS_KMOD_DEBUG_HELP_FILE); - return -EIO; - } } debug_mask_to_string(&client_debug_mask, 1); diff --git a/fs/orangefs/orangefs-mod.c b/fs/orangefs/orangefs-mod.c index 2e5b03065f34..4113eb0495bf 100644 --- a/fs/orangefs/orangefs-mod.c +++ b/fs/orangefs/orangefs-mod.c @@ -124,7 +124,7 @@ static int __init orangefs_init(void) * unknown at boot time. * * orangefs_prepare_debugfs_help_string will be used again - * later to rebuild the debug-help file after the client starts + * later to rebuild the debug-help-string after the client starts * and passes along the needed info. The argument signifies * which time orangefs_prepare_debugfs_help_string is being * called. @@ -152,7 +152,9 @@ static int __init orangefs_init(void) ret = register_filesystem(&orangefs_fs_type); if (ret == 0) { - pr_info("orangefs: module version %s loaded\n", ORANGEFS_VERSION); + pr_info("%s: module version %s loaded\n", + __func__, + ORANGEFS_VERSION); ret = 0; goto out; } From 8d83bc22b259e5526625b6d298f637786c71129f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Tue, 11 Oct 2016 20:52:46 +0300 Subject: [PATCH 402/792] drm/i915: Respect alternate_ddc_pin for all DDI ports MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The VBT provides the platform a way to mix and match the DDI ports vs. GMBUS pins. Currently we only trust the VBT for DDI E, which I suppose has no standard GMBUS pin assignment. However, there are machines out there that use a non-standard mapping for the other ports as well. Let's start trusting the VBT on this one for all ports on DDI platforms. I've structured the code such that other platforms could easily start using this as well, by simply filling in the ddi_port_info. IIRC there may be CHV system that might actually need this. v2: Include a commit message, include a debug message during init Cc: stable@vger.kernel.org Cc: Maarten Maathuis Tested-by: Maarten Maathuis Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97877 Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1476208368-5710-3-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Jim Bride (cherry picked from commit e4ab73a13291fc844c9e24d5c347bd95818544d2) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_hdmi.c | 84 ++++++++++++++++++------------- 1 file changed, 48 insertions(+), 36 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index f40a35f2913a..13c306173f27 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -1799,6 +1799,50 @@ intel_hdmi_add_properties(struct intel_hdmi *intel_hdmi, struct drm_connector *c intel_hdmi->aspect_ratio = HDMI_PICTURE_ASPECT_NONE; } +static u8 intel_hdmi_ddc_pin(struct drm_i915_private *dev_priv, + enum port port) +{ + const struct ddi_vbt_port_info *info = + &dev_priv->vbt.ddi_port_info[port]; + u8 ddc_pin; + + if (info->alternate_ddc_pin) { + DRM_DEBUG_KMS("Using DDC pin 0x%x for port %c (VBT)\n", + info->alternate_ddc_pin, port_name(port)); + return info->alternate_ddc_pin; + } + + switch (port) { + case PORT_B: + if (IS_BROXTON(dev_priv)) + ddc_pin = GMBUS_PIN_1_BXT; + else + ddc_pin = GMBUS_PIN_DPB; + break; + case PORT_C: + if (IS_BROXTON(dev_priv)) + ddc_pin = GMBUS_PIN_2_BXT; + else + ddc_pin = GMBUS_PIN_DPC; + break; + case PORT_D: + if (IS_CHERRYVIEW(dev_priv)) + ddc_pin = GMBUS_PIN_DPD_CHV; + else + ddc_pin = GMBUS_PIN_DPD; + break; + default: + MISSING_CASE(port); + ddc_pin = GMBUS_PIN_DPB; + break; + } + + DRM_DEBUG_KMS("Using DDC pin 0x%x for port %c (platform default)\n", + ddc_pin, port_name(port)); + + return ddc_pin; +} + void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port, struct intel_connector *intel_connector) { @@ -1808,7 +1852,6 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port, struct drm_device *dev = intel_encoder->base.dev; struct drm_i915_private *dev_priv = to_i915(dev); enum port port = intel_dig_port->port; - uint8_t alternate_ddc_pin; DRM_DEBUG_KMS("Adding HDMI connector on port %c\n", port_name(port)); @@ -1826,12 +1869,10 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port, connector->doublescan_allowed = 0; connector->stereo_allowed = 1; + intel_hdmi->ddc_bus = intel_hdmi_ddc_pin(dev_priv, port); + switch (port) { case PORT_B: - if (IS_BROXTON(dev_priv)) - intel_hdmi->ddc_bus = GMBUS_PIN_1_BXT; - else - intel_hdmi->ddc_bus = GMBUS_PIN_DPB; /* * On BXT A0/A1, sw needs to activate DDIA HPD logic and * interrupts to check the external panel connection. @@ -1842,46 +1883,17 @@ void intel_hdmi_init_connector(struct intel_digital_port *intel_dig_port, intel_encoder->hpd_pin = HPD_PORT_B; break; case PORT_C: - if (IS_BROXTON(dev_priv)) - intel_hdmi->ddc_bus = GMBUS_PIN_2_BXT; - else - intel_hdmi->ddc_bus = GMBUS_PIN_DPC; intel_encoder->hpd_pin = HPD_PORT_C; break; case PORT_D: - if (WARN_ON(IS_BROXTON(dev_priv))) - intel_hdmi->ddc_bus = GMBUS_PIN_DISABLED; - else if (IS_CHERRYVIEW(dev_priv)) - intel_hdmi->ddc_bus = GMBUS_PIN_DPD_CHV; - else - intel_hdmi->ddc_bus = GMBUS_PIN_DPD; intel_encoder->hpd_pin = HPD_PORT_D; break; case PORT_E: - /* On SKL PORT E doesn't have seperate GMBUS pin - * We rely on VBT to set a proper alternate GMBUS pin. */ - alternate_ddc_pin = - dev_priv->vbt.ddi_port_info[PORT_E].alternate_ddc_pin; - switch (alternate_ddc_pin) { - case DDC_PIN_B: - intel_hdmi->ddc_bus = GMBUS_PIN_DPB; - break; - case DDC_PIN_C: - intel_hdmi->ddc_bus = GMBUS_PIN_DPC; - break; - case DDC_PIN_D: - intel_hdmi->ddc_bus = GMBUS_PIN_DPD; - break; - default: - MISSING_CASE(alternate_ddc_pin); - } intel_encoder->hpd_pin = HPD_PORT_E; break; - case PORT_A: - intel_encoder->hpd_pin = HPD_PORT_A; - /* Internal port only for eDP. */ default: - BUG(); + MISSING_CASE(port); + return; } if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) { From cdffe3e252bb55e82ee89bbdfe8d2f18b6157c28 Mon Sep 17 00:00:00 2001 From: Lyude Date: Wed, 26 Oct 2016 12:36:09 -0400 Subject: [PATCH 403/792] drm/i915/vlv: Prevent enabling hpd polling in late suspend MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit One of the CI machines began to run into issues with the hpd poller suddenly waking up in the midst of the late suspend phase. It looks like this is getting caused by the fact we now deinitialize power wells in late suspend, which means that intel_hpd_poll_init() gets called in late suspend causing polling to get re-enabled. So, when deinitializing power wells on valleyview we now refrain from enabling polling in the midst of suspend. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98040 Fixes: 19625e85c6ec ("drm/i915: Enable polling when we don't have hpd") Signed-off-by: Lyude Cc: Ville Syrjälä Cc: Jani Saarinen Cc: Petry Latvala Reviewed-by: Ville Syrjälä Signed-off-by: Jani Nikula Link: http://patchwork.freedesktop.org/patch/msgid/1477499769-1966-1-git-send-email-lyude@redhat.com (cherry picked from commit b64b540931483cca3200d98756bed6ad0e01d75c) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_runtime_pm.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_runtime_pm.c b/drivers/gpu/drm/i915/intel_runtime_pm.c index 6c11168facd6..a38c2fefe85a 100644 --- a/drivers/gpu/drm/i915/intel_runtime_pm.c +++ b/drivers/gpu/drm/i915/intel_runtime_pm.c @@ -1139,7 +1139,9 @@ static void vlv_display_power_well_deinit(struct drm_i915_private *dev_priv) intel_power_sequencer_reset(dev_priv); - intel_hpd_poll_init(dev_priv); + /* Prevent us from re-enabling polling on accident in late suspend */ + if (!dev_priv->drm.dev->power.is_suspended) + intel_hpd_poll_init(dev_priv); } static void vlv_display_power_well_enable(struct drm_i915_private *dev_priv, From fbb21c5202ae7f1e71e832b1af59fb047da6383e Mon Sep 17 00:00:00 2001 From: Dhinakaran Pandiyan Date: Tue, 1 Nov 2016 11:47:59 -0700 Subject: [PATCH 404/792] drm/i915/dp: BDW cdclk fix for DP audio MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit According to BSpec, cdclk for BDW has to be not less than 432 MHz with DP audio enabled, port width x4, and link rate HBR2 (5.4 GHz). With cdclk less than 432 MHz, enabling audio leads to pipe FIFO underruns and displays cycling on/off. From BSpec: "Display» BDW-SKL» dpr» [Register] DP_TP_CTL [BDW+,EXCLUDE(CHV)] Workaround : Do not use DisplayPort with CDCLK less than 432 MHz, audio enabled, port width x4, and link rate HBR2 (5.4 GHz), or else there may be audio corruption or screen corruption." Since, some DP configurations (e.g., MST) use port width x4 and HBR2 link rate, let's increase the cdclk to >= 432 MHz to enable audio for those cases. v4: Changed commit message v3: Combine BDW pixel rate adjustments into a function (Jani) v2: Restrict fix to BDW Retain the set cdclk across modesets (Ville) Cc: stable@vger.kernel.org Signed-off-by: Dhinakaran Pandiyan Reviewed-by: Ville Syrjälä Reviewed-by: Jani Nikula Signed-off-by: Jani Nikula Link: http://patchwork.freedesktop.org/patch/msgid/1478026080-2925-1-git-send-email-dhinakaran.pandiyan@intel.com (cherry picked from commit b30ce9e0552aa017ac6f2243f3c2d8e36fe52e69) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_display.c | 27 ++++++++++++++++++++++++--- 1 file changed, 24 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 0ad1879bfd9d..4f57f8c6074e 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -10243,6 +10243,27 @@ static void bxt_modeset_commit_cdclk(struct drm_atomic_state *old_state) bxt_set_cdclk(to_i915(dev), req_cdclk); } +static int bdw_adjust_min_pipe_pixel_rate(struct intel_crtc_state *crtc_state, + int pixel_rate) +{ + /* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */ + if (crtc_state->ips_enabled) + pixel_rate = DIV_ROUND_UP(pixel_rate * 100, 95); + + /* BSpec says "Do not use DisplayPort with CDCLK less than + * 432 MHz, audio enabled, port width x4, and link rate + * HBR2 (5.4 GHz), or else there may be audio corruption or + * screen corruption." + */ + if (intel_crtc_has_dp_encoder(crtc_state) && + crtc_state->has_audio && + crtc_state->port_clock >= 540000 && + crtc_state->lane_count == 4) + pixel_rate = max(432000, pixel_rate); + + return pixel_rate; +} + /* compute the max rate for new configuration */ static int ilk_max_pixel_rate(struct drm_atomic_state *state) { @@ -10268,9 +10289,9 @@ static int ilk_max_pixel_rate(struct drm_atomic_state *state) pixel_rate = ilk_pipe_pixel_rate(crtc_state); - /* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */ - if (IS_BROADWELL(dev_priv) && crtc_state->ips_enabled) - pixel_rate = DIV_ROUND_UP(pixel_rate * 100, 95); + if (IS_BROADWELL(dev_priv)) + pixel_rate = bdw_adjust_min_pipe_pixel_rate(crtc_state, + pixel_rate); intel_state->min_pixclk[i] = pixel_rate; } From 61e0c5438866d0e737937fc35d752538960e1e9f Mon Sep 17 00:00:00 2001 From: Dhinakaran Pandiyan Date: Wed, 2 Nov 2016 13:13:21 -0700 Subject: [PATCH 405/792] drm/i915/dp: Extend BDW DP audio workaround to GEN9 platforms According to BSpec, cdclk for BDW has to be not less than 432 MHz with DP audio enabled, port width x4, and link rate HBR2 (5.4 GHz). With cdclk less than 432 MHz, enabling audio leads to pipe FIFO underruns and displays cycling on/off. Let's apply this work around to GEN9 platforms too, as it fixes the same issue. v2: Move drm_device to drm_i915_private conversion Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97907 Cc: stable@vger.kernel.org Cc: Libin Yang Signed-off-by: Dhinakaran Pandiyan Reviewed-by: Jani Nikula Signed-off-by: Jani Nikula Link: http://patchwork.freedesktop.org/patch/msgid/1478117601-19122-1-git-send-email-dhinakaran.pandiyan@intel.com (cherry picked from commit 9c7540241885838cfc7fa58c4a8bd75be0303ed1) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_display.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 4f57f8c6074e..81c11499bcf0 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -10246,8 +10246,10 @@ static void bxt_modeset_commit_cdclk(struct drm_atomic_state *old_state) static int bdw_adjust_min_pipe_pixel_rate(struct intel_crtc_state *crtc_state, int pixel_rate) { + struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev); + /* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */ - if (crtc_state->ips_enabled) + if (IS_BROADWELL(dev_priv) && crtc_state->ips_enabled) pixel_rate = DIV_ROUND_UP(pixel_rate * 100, 95); /* BSpec says "Do not use DisplayPort with CDCLK less than @@ -10289,7 +10291,7 @@ static int ilk_max_pixel_rate(struct drm_atomic_state *state) pixel_rate = ilk_pipe_pixel_rate(crtc_state); - if (IS_BROADWELL(dev_priv)) + if (IS_BROADWELL(dev_priv) || IS_GEN9(dev_priv)) pixel_rate = bdw_adjust_min_pipe_pixel_rate(crtc_state, pixel_rate); From c4b8c570447a7bc171829532269878345b3ea9d0 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 7 Nov 2016 10:54:43 +0000 Subject: [PATCH 406/792] drm/i915: Round tile chunks up for constructing partial VMAs When we split a large object up into chunks for GTT faulting (because we can't fit the whole object into the aperture) we have to align our cuts with the fence registers. Each partial VMA must cover a complete set of tile rows or the offset into each partial VMA is not aligned with the whole image. Currently we enforce a minimum size on each partial VMA, but this minimum size itself was not aligned to the tile row causing distortion. Reported-by: Andreas Reis Reported-by: Chris Clayton Reported-by: Norbert Preining Tested-by: Norbert Preining Tested-by: Chris Clayton Fixes: 03af84fe7f48 ("drm/i915: Choose partial chunksize based on tile row size") Fixes: a61007a83a46 ("drm/i915: Fix partial GGTT faulting") # enabling patch Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98402 Testcase: igt/gem_mmap_gtt/medium-copy-odd Signed-off-by: Chris Wilson Cc: Joonas Lahtinen Cc: Jani Nikula Cc: # v4.9-rc1+ Link: http://patchwork.freedesktop.org/patch/msgid/20161107105443.27855-1-chris@chris-wilson.co.uk Reviewed-by: Joonas Lahtinen (cherry picked from commit 0ef723cbceb6dce8116e75d44c5b8679b2eba69a) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 23960de81b57..44b3f01faed3 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1806,7 +1806,7 @@ int i915_gem_fault(struct vm_area_struct *area, struct vm_fault *vmf) /* Use a partial view if it is bigger than available space */ chunk_size = MIN_CHUNK_PAGES; if (i915_gem_object_is_tiled(obj)) - chunk_size = max(chunk_size, tile_row_pages(obj)); + chunk_size = roundup(chunk_size, tile_row_pages(obj)); memset(&view, 0, sizeof(view)); view.type = I915_GGTT_VIEW_PARTIAL; From 54905ab5fe7aa453610e31cec640e528aaedb2e2 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 7 Nov 2016 11:01:28 +0000 Subject: [PATCH 407/792] drm/i915: Limit Valleyview and earlier to only using mappable scanout MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Valleyview appears to be limited to only scanning out from the first 512MiB of the Global GTT. Lets presume that this behaviour was inherited from the display block copied from g4x (not Ironlake) and all earlier generations are similarly affected, though testing suggests different symptoms. For simplicity, impose that these platforms must scanout from the mappable region. (For extra simplicity, use HAS_GMCH_DISPLAY even though this catches Cherryview which does not appear to be limited to the low aperture for its scanout.) v2: Use HAS_GMCH_DISPLAY() to more clearly convey my intent about limiting this workaround to the old style of display engine. v3: Update changelog to reflect testing by Ville Syrjälä v4: Include the changes to the comments as well Reported-by: Luis Botello Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98036 Fixes: 2efb813d5388 ("drm/i915: Fallback to using unmappable memory for scanout") Signed-off-by: Chris Wilson Cc: Akash Goel Cc: Joonas Lahtinen Cc: Ville Syrjälä Cc: # v4.9-rc1+ Link: http://patchwork.freedesktop.org/patch/msgid/20161107110128.28762-1-chris@chris-wilson.co.uk Reviewed-by: Ville Syrjälä (cherry picked from commit 767a222e47cc13239d38018887f911fec06169ea) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 44b3f01faed3..91ab7e9d6d2e 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3543,8 +3543,22 @@ i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj, if (view->type == I915_GGTT_VIEW_NORMAL) vma = i915_gem_object_ggtt_pin(obj, view, 0, alignment, PIN_MAPPABLE | PIN_NONBLOCK); - if (IS_ERR(vma)) - vma = i915_gem_object_ggtt_pin(obj, view, 0, alignment, 0); + if (IS_ERR(vma)) { + struct drm_i915_private *i915 = to_i915(obj->base.dev); + unsigned int flags; + + /* Valleyview is definitely limited to scanning out the first + * 512MiB. Lets presume this behaviour was inherited from the + * g4x display engine and that all earlier gen are similarly + * limited. Testing suggests that it is a little more + * complicated than this. For example, Cherryview appears quite + * happy to scanout from anywhere within its global aperture. + */ + flags = 0; + if (HAS_GMCH_DISPLAY(i915)) + flags = PIN_MAPPABLE; + vma = i915_gem_object_ggtt_pin(obj, view, 0, alignment, flags); + } if (IS_ERR(vma)) goto err_unpin_display; From 757124d95c42bb579d67df51e51789849929ee31 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 3 Nov 2016 17:47:51 -0400 Subject: [PATCH 408/792] drm/amdgpu: fix crash in acp_hw_fini On CZ/ST systems with AZ rather than ACP audio, we need to bail early in hw_fini since there is nothing to do. bug: https://bugs.freedesktop.org/show_bug.cgi?id=98276 Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c index 892d60fb225b..2057683f7b59 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_acp.c @@ -395,9 +395,12 @@ static int acp_hw_fini(void *handle) { int i, ret; struct device *dev; - struct amdgpu_device *adev = (struct amdgpu_device *)handle; + /* return early if no ACP */ + if (!adev->acp.acp_genpd) + return 0; + for (i = 0; i < ACP_DEVS ; i++) { dev = get_mfd_cell_dev(adev->acp.acp_cell[i].name, i); ret = pm_genpd_remove_device(&adev->acp.acp_genpd->gpd, dev); From 17ae1c650c1ecf8dc8e16d54b0f68a345965f43f Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 3 Nov 2016 18:40:19 +0100 Subject: [PATCH 409/792] phy: fix device reference leaks Make sure to drop the reference taken by bus_find_device_by_name() before returning from phy_connect() and phy_attach(). Note that both function still take a reference to the phy device through phy_attach_direct(). Fixes: e13934563db0 ("[PATCH] PHY Layer fixup") Cc: Florian Fainelli Signed-off-by: Johan Hovold Signed-off-by: David S. Miller --- drivers/net/phy/phy_device.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index e977ba931878..1a4bf8acad78 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -723,6 +723,7 @@ struct phy_device *phy_connect(struct net_device *dev, const char *bus_id, phydev = to_phy_device(d); rc = phy_connect_direct(dev, phydev, handler, interface); + put_device(d); if (rc) return ERR_PTR(rc); @@ -953,6 +954,7 @@ struct phy_device *phy_attach(struct net_device *dev, const char *bus_id, phydev = to_phy_device(d); rc = phy_attach_direct(dev, phydev, phydev->dev_flags, interface); + put_device(d); if (rc) return ERR_PTR(rc); From c7262aaace1b17a650598063e3b9ee1785fde377 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 3 Nov 2016 18:40:20 +0100 Subject: [PATCH 410/792] net: ethernet: ti: cpsw: fix device and of_node leaks Make sure to drop the references taken by of_get_child_by_name() and bus_find_device() before returning from cpsw_phy_sel(). Note that holding a reference to the cpsw-phy-sel device does not prevent the devres-managed private data from going away. Fixes: 5892cd135e16 ("drivers: net: cpsw-phy-sel: Add new driver...") Cc: Mugunthan V N Cc: Grygorii Strashko Cc: linux-omap@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/cpsw-phy-sel.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/ti/cpsw-phy-sel.c b/drivers/net/ethernet/ti/cpsw-phy-sel.c index 054a8dd23dae..ba1e45ff6aae 100644 --- a/drivers/net/ethernet/ti/cpsw-phy-sel.c +++ b/drivers/net/ethernet/ti/cpsw-phy-sel.c @@ -176,9 +176,12 @@ void cpsw_phy_sel(struct device *dev, phy_interface_t phy_mode, int slave) } dev = bus_find_device(&platform_bus_type, NULL, node, match); + of_node_put(node); priv = dev_get_drvdata(dev); priv->cpsw_phy_sel(priv, phy_mode, slave); + + put_device(dev); } EXPORT_SYMBOL_GPL(cpsw_phy_sel); From 6bed0118012ea350acbe606ab3ae0ed3d60ed5f3 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 3 Nov 2016 18:40:21 +0100 Subject: [PATCH 411/792] net: ethernet: ti: davinci_emac: fix device reference leak Make sure to drop the references taken by bus_find_device() before returning from emac_dev_open(). Note that phy_connect still takes a reference to the phy device. Fixes: 5d69e0076a72 ("net: davinci_emac: switch to new mdio") Cc: Mugunthan V N Cc: Grygorii Strashko Cc: linux-omap@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/davinci_emac.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c index 2fd94a5bc1f3..84fbe5714f8b 100644 --- a/drivers/net/ethernet/ti/davinci_emac.c +++ b/drivers/net/ethernet/ti/davinci_emac.c @@ -1410,6 +1410,7 @@ static int emac_dev_open(struct net_device *ndev) int i = 0; struct emac_priv *priv = netdev_priv(ndev); struct phy_device *phydev = NULL; + struct device *phy = NULL; ret = pm_runtime_get_sync(&priv->pdev->dev); if (ret < 0) { @@ -1488,19 +1489,20 @@ static int emac_dev_open(struct net_device *ndev) /* use the first phy on the bus if pdata did not give us a phy id */ if (!phydev && !priv->phy_id) { - struct device *phy; - phy = bus_find_device(&mdio_bus_type, NULL, NULL, match_first_device); - if (phy) + if (phy) { priv->phy_id = dev_name(phy); + if (!priv->phy_id || !*priv->phy_id) + put_device(phy); + } } if (!phydev && priv->phy_id && *priv->phy_id) { phydev = phy_connect(ndev, priv->phy_id, &emac_adjust_link, PHY_INTERFACE_MODE_MII); - + put_device(phy); /* reference taken by bus_find_device */ if (IS_ERR(phydev)) { dev_err(emac_dev, "could not connect to phy %s\n", priv->phy_id); From 2271150bfb814b72ec57ae2fdf66e39da2eafafd Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 3 Nov 2016 18:40:22 +0100 Subject: [PATCH 412/792] net: hns: fix device reference leaks Make sure to drop the reference taken by class_find_device() in hnae_get_handle() on errors and when later releasing the handle. Fixes: 6fe6611ff275 ("net: add Hisilicon Network Subsystem...") Cc: Yisen Zhuang Cc: Salil Mehta Signed-off-by: Johan Hovold Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns/hnae.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/hisilicon/hns/hnae.c b/drivers/net/ethernet/hisilicon/hns/hnae.c index c54c6fac0d1d..b6ed818f78ff 100644 --- a/drivers/net/ethernet/hisilicon/hns/hnae.c +++ b/drivers/net/ethernet/hisilicon/hns/hnae.c @@ -332,8 +332,10 @@ struct hnae_handle *hnae_get_handle(struct device *owner_dev, return ERR_PTR(-ENODEV); handle = dev->ops->get_handle(dev, port_id); - if (IS_ERR(handle)) + if (IS_ERR(handle)) { + put_device(&dev->cls_dev); return handle; + } handle->dev = dev; handle->owner_dev = owner_dev; @@ -356,6 +358,8 @@ out_when_init_queue: for (j = i - 1; j >= 0; j--) hnae_fini_queue(handle->qs[j]); + put_device(&dev->cls_dev); + return ERR_PTR(-ENOMEM); } EXPORT_SYMBOL(hnae_get_handle); @@ -377,6 +381,8 @@ void hnae_put_handle(struct hnae_handle *h) dev->ops->put_handle(h); module_put(dev->owner); + + put_device(&dev->cls_dev); } EXPORT_SYMBOL(hnae_put_handle); From 7233bc84a3aeda835d334499dc00448373caf5c0 Mon Sep 17 00:00:00 2001 From: Marcelo Ricardo Leitner Date: Thu, 3 Nov 2016 17:03:41 -0200 Subject: [PATCH 413/792] sctp: assign assoc_id earlier in __sctp_connect sctp_wait_for_connect() currently already holds the asoc to keep it alive during the sleep, in case another thread release it. But Andrey Konovalov and Dmitry Vyukov reported an use-after-free in such situation. Problem is that __sctp_connect() doesn't get a ref on the asoc and will do a read on the asoc after calling sctp_wait_for_connect(), but by then another thread may have closed it and the _put on sctp_wait_for_connect will actually release it, causing the use-after-free. Fix is, instead of doing the read after waiting for the connect, do it before so, and avoid this issue as the socket is still locked by then. There should be no issue on returning the asoc id in case of failure as the application shouldn't trust on that number in such situations anyway. This issue doesn't exist in sctp_sendmsg() path. Reported-by: Dmitry Vyukov Reported-by: Andrey Konovalov Tested-by: Andrey Konovalov Signed-off-by: Marcelo Ricardo Leitner Reviewed-by: Xin Long Acked-by: Neil Horman Signed-off-by: David S. Miller --- net/sctp/socket.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/net/sctp/socket.c b/net/sctp/socket.c index 71b75f9d9c1b..faa48ff5cf4b 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -1214,9 +1214,12 @@ static int __sctp_connect(struct sock *sk, timeo = sock_sndtimeo(sk, f_flags & O_NONBLOCK); - err = sctp_wait_for_connect(asoc, &timeo); - if ((err == 0 || err == -EINPROGRESS) && assoc_id) + if (assoc_id) *assoc_id = asoc->assoc_id; + err = sctp_wait_for_connect(asoc, &timeo); + /* Note: the asoc may be freed after the return of + * sctp_wait_for_connect. + */ /* Don't free association on exit. */ asoc = NULL; From 483bed2b0ddd12ec33fc9407e0c6e1088e77a97c Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Fri, 4 Nov 2016 00:01:19 +0100 Subject: [PATCH 414/792] bpf: fix htab map destruction when extra reserve is in use Commit a6ed3ea65d98 ("bpf: restore behavior of bpf_map_update_elem") added an extra per-cpu reserve to the hash table map to restore old behaviour from pre prealloc times. When non-prealloc is in use for a map, then problem is that once a hash table extra element has been linked into the hash-table, and the hash table is destroyed due to refcount dropping to zero, then htab_map_free() -> delete_all_elements() will walk the whole hash table and drop all elements via htab_elem_free(). The problem is that the element from the extra reserve is first fed to the wrong backend allocator and eventually freed twice. Fixes: a6ed3ea65d98 ("bpf: restore behavior of bpf_map_update_elem") Reported-by: Dmitry Vyukov Signed-off-by: Daniel Borkmann Acked-by: Alexei Starovoitov Signed-off-by: David S. Miller --- kernel/bpf/hashtab.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/bpf/hashtab.c b/kernel/bpf/hashtab.c index 570eeca7bdfa..ad1bc67aff1b 100644 --- a/kernel/bpf/hashtab.c +++ b/kernel/bpf/hashtab.c @@ -687,7 +687,8 @@ static void delete_all_elements(struct bpf_htab *htab) hlist_for_each_entry_safe(l, n, head, hash_node) { hlist_del_rcu(&l->hash_node); - htab_elem_free(htab, l); + if (l->state != HTAB_EXTRA_ELEM_USED) + htab_elem_free(htab, l); } } } From 20b2b24f91f70e7d3f0918c077546cb21bd73a87 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Fri, 4 Nov 2016 00:56:31 +0100 Subject: [PATCH 415/792] bpf: fix map not being uncharged during map creation failure In map_create(), we first find and create the map, then once that suceeded, we charge it to the user's RLIMIT_MEMLOCK, and then fetch a new anon fd through anon_inode_getfd(). The problem is, once the latter fails f.e. due to RLIMIT_NOFILE limit, then we only destruct the map via map->ops->map_free(), but without uncharging the previously locked memory first. That means that the user_struct allocation is leaked as well as the accounted RLIMIT_MEMLOCK memory not released. Make the label names in the fix consistent with bpf_prog_load(). Fixes: aaac3ba95e4c ("bpf: charge user for creation of BPF maps and programs") Signed-off-by: Daniel Borkmann Acked-by: Alexei Starovoitov Signed-off-by: David S. Miller --- kernel/bpf/syscall.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c index 228f962447a5..237f3d6a7ddc 100644 --- a/kernel/bpf/syscall.c +++ b/kernel/bpf/syscall.c @@ -194,7 +194,7 @@ static int map_create(union bpf_attr *attr) err = bpf_map_charge_memlock(map); if (err) - goto free_map; + goto free_map_nouncharge; err = bpf_map_new_fd(map); if (err < 0) @@ -204,6 +204,8 @@ static int map_create(union bpf_attr *attr) return err; free_map: + bpf_map_uncharge_memlock(map); +free_map_nouncharge: map->ops->map_free(map); return err; } From e6e335bf3a400bc3b5a65322a891318a25749769 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Mon, 7 Nov 2016 10:36:46 -0800 Subject: [PATCH 416/792] ARC: change return value of userspace cmpxchg assist syscall The original syscall only used to return errno to indicate if cmpxchg succeeded. It was not returning the "previous" value which typical cmpxchg callers are interested in to build their slowpaths or retry loops. Given user preemption in syscall return path etc, it is not wise to check this in userspace afterwards, but should be what kernel actually observed in the syscall. So change the syscall interface to always return the previous value and additionally set Z flag to indicate whether operation succeeded or not (just like ARM implementation when they used to have this syscall) The flag approach avoids having to put_user errno which is nice given the use case for this syscall cares mostly about the "previous" value. Signed-off-by: Vineet Gupta --- arch/arc/include/asm/arcregs.h | 2 ++ arch/arc/kernel/process.c | 20 +++++++++++--------- 2 files changed, 13 insertions(+), 9 deletions(-) diff --git a/arch/arc/include/asm/arcregs.h b/arch/arc/include/asm/arcregs.h index 7f3f9f63708c..1bd24ec3e350 100644 --- a/arch/arc/include/asm/arcregs.h +++ b/arch/arc/include/asm/arcregs.h @@ -43,12 +43,14 @@ #define STATUS_AE_BIT 5 /* Exception active */ #define STATUS_DE_BIT 6 /* PC is in delay slot */ #define STATUS_U_BIT 7 /* User/Kernel mode */ +#define STATUS_Z_BIT 11 #define STATUS_L_BIT 12 /* Loop inhibit */ /* These masks correspond to the status word(STATUS_32) bits */ #define STATUS_AE_MASK (1<status32 &= ~STATUS_Z_MASK; + if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int))) return -EFAULT; preempt_disable(); - ret = __get_user(uval, uaddr); - if (ret) + if (__get_user(uval, uaddr)) goto done; - if (uval != expected) - ret = -EAGAIN; - else - ret = __put_user(new, uaddr); + if (uval == expected) { + if (!__put_user(new, uaddr)) + regs->status32 |= STATUS_Z_MASK; + } done: preempt_enable(); - return ret; + return uval; } void arch_cpu_idle(void) From 922cc171998ac3dbe74d57011ef7ed57e9b0d7df Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Mon, 31 Oct 2016 14:09:52 -0700 Subject: [PATCH 417/792] ARC: timer: rtc: implement read loop in "C" vs. inline asm The current code doesn't even compile as somehow the inline assembly can't see the register names defined as ARC_RTC_* I'm pretty sure It worked when I first got it merged, but the tools were definitely different then. So better to write this in "C" anyways. CC: stable@vger.kernel.org #4.2+ Acked-by: Daniel Lezcano Signed-off-by: Vineet Gupta --- arch/arc/kernel/time.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) diff --git a/arch/arc/kernel/time.c b/arch/arc/kernel/time.c index f927b8dc6edd..c10390d1ddb6 100644 --- a/arch/arc/kernel/time.c +++ b/arch/arc/kernel/time.c @@ -152,14 +152,17 @@ static cycle_t arc_read_rtc(struct clocksource *cs) cycle_t full; } stamp; - - __asm__ __volatile( - "1: \n" - " lr %0, [AUX_RTC_LOW] \n" - " lr %1, [AUX_RTC_HIGH] \n" - " lr %2, [AUX_RTC_CTRL] \n" - " bbit0.nt %2, 31, 1b \n" - : "=r" (stamp.low), "=r" (stamp.high), "=r" (status)); + /* + * hardware has an internal state machine which tracks readout of + * low/high and updates the CTRL.status if + * - interrupt/exception taken between the two reads + * - high increments after low has been read + */ + do { + stamp.low = read_aux_reg(AUX_RTC_LOW); + stamp.high = read_aux_reg(AUX_RTC_HIGH); + status = read_aux_reg(AUX_RTC_CTRL); + } while (!(status & _BITUL(31))); return stamp.full; } From bb29dd84333a96f309c6d0f88b285b5b78927058 Mon Sep 17 00:00:00 2001 From: Anna Schumaker Date: Wed, 26 Oct 2016 10:33:31 -0400 Subject: [PATCH 418/792] SUNRPC: Fix suspicious RCU usage We need to hold the rcu_read_lock() when calling rcu_dereference(), otherwise we can't guarantee that the object being dereferenced still exists. Fixes: 39e5d2df ("SUNRPC search xprt switch for sockaddr") Signed-off-by: Anna Schumaker --- net/sunrpc/clnt.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c index 34dd7b26ee5f..62a482790937 100644 --- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -2753,14 +2753,18 @@ EXPORT_SYMBOL_GPL(rpc_cap_max_reconnect_timeout); void rpc_clnt_xprt_switch_put(struct rpc_clnt *clnt) { + rcu_read_lock(); xprt_switch_put(rcu_dereference(clnt->cl_xpi.xpi_xpswitch)); + rcu_read_unlock(); } EXPORT_SYMBOL_GPL(rpc_clnt_xprt_switch_put); void rpc_clnt_xprt_switch_add_xprt(struct rpc_clnt *clnt, struct rpc_xprt *xprt) { + rcu_read_lock(); rpc_xprt_switch_add_xprt(rcu_dereference(clnt->cl_xpi.xpi_xpswitch), xprt); + rcu_read_unlock(); } EXPORT_SYMBOL_GPL(rpc_clnt_xprt_switch_add_xprt); @@ -2770,9 +2774,8 @@ bool rpc_clnt_xprt_switch_has_addr(struct rpc_clnt *clnt, struct rpc_xprt_switch *xps; bool ret; - xps = rcu_dereference(clnt->cl_xpi.xpi_xpswitch); - rcu_read_lock(); + xps = rcu_dereference(clnt->cl_xpi.xpi_xpswitch); ret = rpc_xprt_switch_has_addr(xps, sap); rcu_read_unlock(); return ret; From 8ef3295530ddc969ea9a3f307d94df97fcbc0629 Mon Sep 17 00:00:00 2001 From: Petr Vandrovec Date: Mon, 7 Nov 2016 12:11:29 -0800 Subject: [PATCH 419/792] NFS: Ignore connections that have cl_rpcclient uninitialized cl_rpcclient starts as ERR_PTR(-EINVAL), and connections like that are floating freely through the system. Most places check whether pointer is valid before dereferencing it, but newly added code in nfs_match_client does not. Which causes crashes when more than one NFS mount point is present. Signed-off-by: Petr Vandrovec Signed-off-by: Anna Schumaker --- fs/nfs/client.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/nfs/client.c b/fs/nfs/client.c index 7555ba889d1f..ebecfb8fba06 100644 --- a/fs/nfs/client.c +++ b/fs/nfs/client.c @@ -314,7 +314,8 @@ static struct nfs_client *nfs_match_client(const struct nfs_client_initdata *dat /* Match the full socket address */ if (!rpc_cmp_addr_port(sap, clap)) /* Match all xprt_switch full socket addresses */ - if (!rpc_clnt_xprt_switch_has_addr(clp->cl_rpcclient, + if (IS_ERR(clp->cl_rpcclient) || + !rpc_clnt_xprt_switch_has_addr(clp->cl_rpcclient, sap)) continue; From 192747166a468dd8fb5d47ad9d5048c138c1fc25 Mon Sep 17 00:00:00 2001 From: Anna Schumaker Date: Wed, 26 Oct 2016 15:54:31 -0400 Subject: [PATCH 420/792] NFS: Don't print a pNFS error if we aren't using pNFS We used to check for a valid layout type id before verifying pNFS flags as an indicator for if we are using pNFS. This changed in 3132e49ece with the introduction of multiple layout types, since now we are passing an array of ids instead of just one. Since then, users have been seeing a KERN_ERR printk show up whenever mounting NFS v4 without pNFS. This patch restores the original behavior of exiting set_pnfs_layoutdriver() early if we aren't using pNFS. Fixes 3132e49ece ("pnfs: track multiple layout types in fsinfo structure") Reviewed-by: Jeff Layton Signed-off-by: Anna Schumaker --- fs/nfs/pnfs.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c index 56b2d96f9103..259ef85f435a 100644 --- a/fs/nfs/pnfs.c +++ b/fs/nfs/pnfs.c @@ -146,6 +146,8 @@ set_pnfs_layoutdriver(struct nfs_server *server, const struct nfs_fh *mntfh, u32 id; int i; + if (fsinfo->nlayouttypes == 0) + goto out_no_driver; if (!(server->nfs_client->cl_exchange_flags & (EXCHGID4_FLAG_USE_NON_PNFS | EXCHGID4_FLAG_USE_PNFS_MDS))) { printk(KERN_ERR "NFS: %s: cl_exchange_flags 0x%x\n", From 0ac84b72c0ed96ace1d8973a06f0120a3b905177 Mon Sep 17 00:00:00 2001 From: Shuah Khan Date: Mon, 7 Nov 2016 10:48:16 -0700 Subject: [PATCH 421/792] fs/nfs: Fix used uninitialized warn in nfs4_slot_seqid_in_use() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix the following warn: fs/nfs/nfs4session.c: In function ‘nfs4_slot_seqid_in_use’: fs/nfs/nfs4session.c:203:54: warning: ‘cur_seq’ may be used uninitialized in this function [-Wmaybe-uninitialized] if (nfs4_slot_get_seqid(tbl, slotid, &cur_seq) == 0 && ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~ cur_seq == seq_nr && test_bit(slotid, tbl->used_slots)) ~~~~~~~~~~~~~~~~~ Signed-off-by: Shuah Khan Signed-off-by: Anna Schumaker --- fs/nfs/nfs4session.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/nfs4session.c b/fs/nfs/nfs4session.c index 150c5a1879bf..a61350f75c74 100644 --- a/fs/nfs/nfs4session.c +++ b/fs/nfs/nfs4session.c @@ -198,7 +198,7 @@ static int nfs4_slot_get_seqid(struct nfs4_slot_table *tbl, u32 slotid, static bool nfs4_slot_seqid_in_use(struct nfs4_slot_table *tbl, u32 slotid, u32 seq_nr) { - u32 cur_seq; + u32 cur_seq = 0; bool ret = false; spin_lock(&tbl->slot_tbl_lock); From 85566ca6b6d7e131837cd197a441d98e83146fae Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 7 Nov 2016 14:52:39 -0700 Subject: [PATCH 422/792] ARM: OMAP3: Fix formatting of features printed With the printk cleanups merged into v4.9-rc1, we now get the omap revision printed on multiple lines. Let's fix that and also remove the extra empty space at the end of the features. And let's update things to use scnprintf as suggested by Ivaylo Dimitrov . Reported-by: Adam Ford Cc: Ivaylo Dimitrov Reviewed-by: Sebastian Reichel Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/id.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 2abd53ae3e7a..cc6d9fa60924 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -205,11 +205,15 @@ void __init omap2xxx_check_revision(void) #define OMAP3_SHOW_FEATURE(feat) \ if (omap3_has_ ##feat()) \ - printk(#feat" "); + n += scnprintf(buf + n, sizeof(buf) - n, #feat " "); static void __init omap3_cpuinfo(void) { const char *cpu_name; + char buf[64]; + int n = 0; + + memset(buf, 0, sizeof(buf)); /* * OMAP3430 and OMAP3530 are assumed to be same. @@ -241,10 +245,10 @@ static void __init omap3_cpuinfo(void) cpu_name = "OMAP3503"; } - sprintf(soc_name, "%s", cpu_name); + scnprintf(soc_name, sizeof(soc_name), "%s", cpu_name); /* Print verbose information */ - pr_info("%s %s (", soc_name, soc_rev); + n += scnprintf(buf, sizeof(buf) - n, "%s %s (", soc_name, soc_rev); OMAP3_SHOW_FEATURE(l2cache); OMAP3_SHOW_FEATURE(iva); @@ -252,8 +256,10 @@ static void __init omap3_cpuinfo(void) OMAP3_SHOW_FEATURE(neon); OMAP3_SHOW_FEATURE(isp); OMAP3_SHOW_FEATURE(192mhz_clk); - - printk(")\n"); + if (*(buf + n - 1) == ' ') + n--; + n += scnprintf(buf + n, sizeof(buf) - n, ")\n"); + pr_info("%s", buf); } #define OMAP3_CHECK_FEATURE(status,feat) \ From 72bb40b8b7620f1390c84c10309a40e886bf449e Mon Sep 17 00:00:00 2001 From: Dave Gerlach Date: Wed, 19 Oct 2016 15:44:12 -0500 Subject: [PATCH 423/792] ARM: AM43XX: Select OMAP_INTERCONNECT in Kconfig AM437x makes use of the omap_l3_noc driver so explicitly select OMAP_INTERCONNECT in the Kconfig for SOC_AM43XX to ensure it gets enabled for AM43XX only builds. Signed-off-by: Dave Gerlach Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index a9afeebd59f2..0465338183c7 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -71,6 +71,7 @@ config SOC_AM43XX select HAVE_ARM_TWD select ARM_ERRATA_754322 select ARM_ERRATA_775420 + select OMAP_INTERCONNECT config SOC_DRA7XX bool "TI DRA7XX" From 271a3024db1f32ca34f504178fade6ef95cd6c9b Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Fri, 21 Oct 2016 09:12:31 -0500 Subject: [PATCH 424/792] ARM: dts: omap3: Fix memory node in Torpedo board Commit ("766a1fe78fc3 ARM: omap3: Add missing memory node") added the memory node, but the patch didn't have the correct starting address. This patch fixes the correct starting address. Signed-off-by: Adam Ford Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/logicpd-torpedo-som.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi index 731ec37aed5b..8f9a69ca818c 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi @@ -13,9 +13,9 @@ }; }; - memory@0 { + memory@80000000 { device_type = "memory"; - reg = <0 0>; + reg = <0x80000000 0>; }; leds { From 4ae46efcff19445afbf49fe7038de6020f37fefe Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Mon, 24 Oct 2016 12:00:21 +0100 Subject: [PATCH 425/792] ARM: OMAP2+: PRM: initialize en_uart4_mask and grpsel_uart4_mask In the case where has_uart4 is false, en_uart4_mask and grpsel_uart4_mask are not initialized and so any garbage value is being logically or'd into the write of PM_WKEN and OMAP3430_PM_MPUGRPSEL. Fix this by initializing these masks to zero. Signed-off-by: Colin Ian King Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/prm3xxx.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/mach-omap2/prm3xxx.c b/arch/arm/mach-omap2/prm3xxx.c index 62680aad2126..718981bb80cd 100644 --- a/arch/arm/mach-omap2/prm3xxx.c +++ b/arch/arm/mach-omap2/prm3xxx.c @@ -319,6 +319,9 @@ void __init omap3_prm_init_pm(bool has_uart4, bool has_iva) if (has_uart4) { en_uart4_mask = OMAP3630_EN_UART4_MASK; grpsel_uart4_mask = OMAP3630_GRPSEL_UART4_MASK; + } else { + en_uart4_mask = 0; + grpsel_uart4_mask = 0; } /* Enable wakeups in PER */ From 0ab11d8ea46fd6faf67df4461c795091429a1496 Mon Sep 17 00:00:00 2001 From: Nicolae Rosia Date: Tue, 1 Nov 2016 11:49:25 +0200 Subject: [PATCH 426/792] ARM: OMAP2+: avoid NULL pointer dereference For OMAP4, volt_data is set in omap44xx_voltagedomains_init. If the SoC is neither OMAP443X or OMAP446X, we end up with a NULL in volt_data which causes a kernel oops. This is the case when booting OMAP4470. Signed-off-by: Nicolae Rosia Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/voltage.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index cba8cada8c81..cd15dbd62671 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -87,6 +87,12 @@ int voltdm_scale(struct voltagedomain *voltdm, return -ENODATA; } + if (!voltdm->volt_data) { + pr_err("%s: No voltage data defined for vdd_%s\n", + __func__, voltdm->name); + return -ENODATA; + } + /* Adjust voltage to the exact voltage from the OPP table */ for (i = 0; voltdm->volt_data[i].volt_nominal != 0; i++) { if (voltdm->volt_data[i].volt_nominal >= target_volt) { From 725ed2238cdb3807c19e7edcb20fde8d0f91597f Mon Sep 17 00:00:00 2001 From: "H. Nikolaus Schaller" Date: Tue, 25 Oct 2016 19:38:09 +0200 Subject: [PATCH 427/792] dts: omap5: board-common: add phandle to reference Palmas gpadc Will be needed for iio based drivers. Signed-off-by: H. Nikolaus Schaller Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap5-board-common.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index 6365635fea5c..7cd1c674ceec 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -415,7 +415,7 @@ ti,backup-battery-charge-high-current; }; - gpadc { + gpadc: gpadc { compatible = "ti,palmas-gpadc"; interrupts = <18 0 16 0 From 0b68f1beea9ed2b31ff7873d5ed0cfbd087da0eb Mon Sep 17 00:00:00 2001 From: "H. Nikolaus Schaller" Date: Tue, 25 Oct 2016 19:38:10 +0200 Subject: [PATCH 428/792] dts: omap5: board-common: enable twl6040 headset jack detection Signed-off-by: H. Nikolaus Schaller Reviewed-by: Peter Ujfalusi Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap5-board-common.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index 7cd1c674ceec..60a33c4b7b82 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -124,6 +124,7 @@ compatible = "ti,abe-twl6040"; ti,model = "omap5-uevm"; + ti,jack-detection; ti,mclk-freq = <19200000>; ti,mcpdm = <&mcpdm>; From 1219e3db7ecb59ab269e9c8b1a199d82b8d088bb Mon Sep 17 00:00:00 2001 From: "H. Nikolaus Schaller" Date: Tue, 25 Oct 2016 19:38:11 +0200 Subject: [PATCH 429/792] ASoC: omap-abe-twl6040: fix typo in bindings documentation Signed-off-by: H. Nikolaus Schaller Acked-by: Peter Ujfalusi Acked-by: Rob Herring Signed-off-by: Tony Lindgren --- Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt b/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt index fd40c852d7c7..462b04e8209f 100644 --- a/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt +++ b/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt @@ -12,7 +12,7 @@ Required properties: Optional properties: - ti,dmic: phandle for the OMAP dmic node if the machine have it connected -- ti,jack_detection: Need to be present if the board capable to detect jack +- ti,jack-detection: Need to be present if the board capable to detect jack insertion, removal. Available audio endpoints for the audio-routing table: From 5d41ce29e3b91ef305f88d23f72b3359de329cec Mon Sep 17 00:00:00 2001 From: David Ahern Date: Thu, 3 Nov 2016 16:17:26 -0700 Subject: [PATCH 430/792] net: icmp6_send should use dst dev to determine L3 domain icmp6_send is called in response to some event. The skb may not have the device set (skb->dev is NULL), but it is expected to have a dst set. Update icmp6_send to use the dst on the skb to determine L3 domain. Fixes: ca254490c8dfd ("net: Add VRF support to IPv6 stack") Signed-off-by: David Ahern Signed-off-by: David S. Miller --- net/ipv6/icmp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/icmp.c b/net/ipv6/icmp.c index bd59c343d35f..7370ad2e693a 100644 --- a/net/ipv6/icmp.c +++ b/net/ipv6/icmp.c @@ -448,7 +448,7 @@ static void icmp6_send(struct sk_buff *skb, u8 type, u8 code, __u32 info, if (__ipv6_addr_needs_scope_id(addr_type)) iif = skb->dev->ifindex; else - iif = l3mdev_master_ifindex(skb->dev); + iif = l3mdev_master_ifindex(skb_dst(skb)->dev); /* * Must not send error if the source does not uniquely From f3358507c11999c91abf54744658bccd49b5879c Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Fri, 4 Nov 2016 12:55:36 +0200 Subject: [PATCH 431/792] virtio-net: drop legacy features in virtio 1 mode Virtio 1.0 spec says VIRTIO_F_ANY_LAYOUT and VIRTIO_NET_F_GSO are legacy-only feature bits. Do not negotiate them in virtio 1 mode. Note this is a spec violation so we need to backport it to stable/downstream kernels. Cc: stable@vger.kernel.org Signed-off-by: Michael S. Tsirkin Reviewed-by: Cornelia Huck Acked-by: Jason Wang Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 30 ++++++++++++++++++++---------- 1 file changed, 20 insertions(+), 10 deletions(-) diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index fad84f3f4109..fd8b1e62301f 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -2038,23 +2038,33 @@ static struct virtio_device_id id_table[] = { { 0 }, }; +#define VIRTNET_FEATURES \ + VIRTIO_NET_F_CSUM, VIRTIO_NET_F_GUEST_CSUM, \ + VIRTIO_NET_F_MAC, \ + VIRTIO_NET_F_HOST_TSO4, VIRTIO_NET_F_HOST_UFO, VIRTIO_NET_F_HOST_TSO6, \ + VIRTIO_NET_F_HOST_ECN, VIRTIO_NET_F_GUEST_TSO4, VIRTIO_NET_F_GUEST_TSO6, \ + VIRTIO_NET_F_GUEST_ECN, VIRTIO_NET_F_GUEST_UFO, \ + VIRTIO_NET_F_MRG_RXBUF, VIRTIO_NET_F_STATUS, VIRTIO_NET_F_CTRL_VQ, \ + VIRTIO_NET_F_CTRL_RX, VIRTIO_NET_F_CTRL_VLAN, \ + VIRTIO_NET_F_GUEST_ANNOUNCE, VIRTIO_NET_F_MQ, \ + VIRTIO_NET_F_CTRL_MAC_ADDR, \ + VIRTIO_NET_F_MTU + static unsigned int features[] = { - VIRTIO_NET_F_CSUM, VIRTIO_NET_F_GUEST_CSUM, - VIRTIO_NET_F_GSO, VIRTIO_NET_F_MAC, - VIRTIO_NET_F_HOST_TSO4, VIRTIO_NET_F_HOST_UFO, VIRTIO_NET_F_HOST_TSO6, - VIRTIO_NET_F_HOST_ECN, VIRTIO_NET_F_GUEST_TSO4, VIRTIO_NET_F_GUEST_TSO6, - VIRTIO_NET_F_GUEST_ECN, VIRTIO_NET_F_GUEST_UFO, - VIRTIO_NET_F_MRG_RXBUF, VIRTIO_NET_F_STATUS, VIRTIO_NET_F_CTRL_VQ, - VIRTIO_NET_F_CTRL_RX, VIRTIO_NET_F_CTRL_VLAN, - VIRTIO_NET_F_GUEST_ANNOUNCE, VIRTIO_NET_F_MQ, - VIRTIO_NET_F_CTRL_MAC_ADDR, + VIRTNET_FEATURES, +}; + +static unsigned int features_legacy[] = { + VIRTNET_FEATURES, + VIRTIO_NET_F_GSO, VIRTIO_F_ANY_LAYOUT, - VIRTIO_NET_F_MTU, }; static struct virtio_driver virtio_net_driver = { .feature_table = features, .feature_table_size = ARRAY_SIZE(features), + .feature_table_legacy = features_legacy, + .feature_table_size_legacy = ARRAY_SIZE(features_legacy), .driver.name = KBUILD_MODNAME, .driver.owner = THIS_MODULE, .id_table = id_table, From 8e0140a2d7c9f55b794a5fce22e05350a435b965 Mon Sep 17 00:00:00 2001 From: Fabian Mewes Date: Fri, 4 Nov 2016 13:16:14 +0100 Subject: [PATCH 432/792] Documentation: networking: dsa: Update tagging protocols Add Qualcomm QCA tagging introduced in cafdc45c9 to the list of supported protocols. Signed-off-by: Fabian Mewes Reviewed-by: Andrew Lunn Acked-by: Florian Fainelli Signed-off-by: David S. Miller --- Documentation/networking/dsa/dsa.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/networking/dsa/dsa.txt b/Documentation/networking/dsa/dsa.txt index 6d6c07cf1a9a..63912ef34606 100644 --- a/Documentation/networking/dsa/dsa.txt +++ b/Documentation/networking/dsa/dsa.txt @@ -67,13 +67,14 @@ Note that DSA does not currently create network interfaces for the "cpu" and Switch tagging protocols ------------------------ -DSA currently supports 4 different tagging protocols, and a tag-less mode as +DSA currently supports 5 different tagging protocols, and a tag-less mode as well. The different protocols are implemented in: net/dsa/tag_trailer.c: Marvell's 4 trailer tag mode (legacy) net/dsa/tag_dsa.c: Marvell's original DSA tag net/dsa/tag_edsa.c: Marvell's enhanced DSA tag net/dsa/tag_brcm.c: Broadcom's 4 bytes tag +net/dsa/tag_qca.c: Qualcomm's 2 bytes tag The exact format of the tag protocol is vendor specific, but in general, they all contain something which: From fd0285a39b1cb496f60210a9a00ad33a815603e7 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Fri, 4 Nov 2016 15:11:57 -0400 Subject: [PATCH 433/792] fib_trie: Correct /proc/net/route off by one error The display of /proc/net/route has had a couple issues due to the fact that when I originally rewrote most of fib_trie I made it so that the iterator was tracking the next value to use instead of the current. In addition it had an off by 1 error where I was tracking the first piece of data as position 0, even though in reality that belonged to the SEQ_START_TOKEN. This patch updates the code so the iterator tracks the last reported position and key instead of the next expected position and key. In addition it shifts things so that all of the leaves start at 1 instead of trying to report leaves starting with offset 0 as being valid. With these two issues addressed this should resolve any off by one errors that were present in the display of /proc/net/route. Fixes: 25b97c016b26 ("ipv4: off-by-one in continuation handling in /proc/net/route") Cc: Andy Whitcroft Reported-by: Jason Baron Tested-by: Jason Baron Signed-off-by: Alexander Duyck Signed-off-by: David S. Miller --- net/ipv4/fib_trie.c | 21 +++++++++------------ 1 file changed, 9 insertions(+), 12 deletions(-) diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c index 31cef3602585..4cff74d4133f 100644 --- a/net/ipv4/fib_trie.c +++ b/net/ipv4/fib_trie.c @@ -2413,22 +2413,19 @@ static struct key_vector *fib_route_get_idx(struct fib_route_iter *iter, struct key_vector *l, **tp = &iter->tnode; t_key key; - /* use cache location of next-to-find key */ + /* use cached location of previously found key */ if (iter->pos > 0 && pos >= iter->pos) { - pos -= iter->pos; key = iter->key; } else { - iter->pos = 0; + iter->pos = 1; key = 0; } - while ((l = leaf_walk_rcu(tp, key)) != NULL) { + pos -= iter->pos; + + while ((l = leaf_walk_rcu(tp, key)) && (pos-- > 0)) { key = l->key + 1; iter->pos++; - - if (--pos <= 0) - break; - l = NULL; /* handle unlikely case of a key wrap */ @@ -2437,7 +2434,7 @@ static struct key_vector *fib_route_get_idx(struct fib_route_iter *iter, } if (l) - iter->key = key; /* remember it */ + iter->key = l->key; /* remember it */ else iter->pos = 0; /* forget it */ @@ -2465,7 +2462,7 @@ static void *fib_route_seq_start(struct seq_file *seq, loff_t *pos) return fib_route_get_idx(iter, *pos); iter->pos = 0; - iter->key = 0; + iter->key = KEY_MAX; return SEQ_START_TOKEN; } @@ -2474,7 +2471,7 @@ static void *fib_route_seq_next(struct seq_file *seq, void *v, loff_t *pos) { struct fib_route_iter *iter = seq->private; struct key_vector *l = NULL; - t_key key = iter->key; + t_key key = iter->key + 1; ++*pos; @@ -2483,7 +2480,7 @@ static void *fib_route_seq_next(struct seq_file *seq, void *v, loff_t *pos) l = leaf_walk_rcu(&iter->tnode, key); if (l) { - iter->key = l->key + 1; + iter->key = l->key; iter->pos++; } else { iter->pos = 0; From 53f8d322234649b4d6f1515b20c127a577efd164 Mon Sep 17 00:00:00 2001 From: Phil Reid Date: Tue, 8 Nov 2016 14:00:45 +0800 Subject: [PATCH 434/792] gpio: pca953x: Fix corruption of other gpios in set_multiple. gpiod_set_array_value_complex does not clear the bits field. Therefore when the drivers set_multiple funciton is called bits outside the mask are undefined and can be either set or not. So bank_val needs to be masked with bank_mask before or with the reg_val cache. Cc: stable@vger.kernel.org Fixes: b4818afeacbd ("gpio: pca953x: Add set_multiple to allow multiple") Signed-off-by: Phil Reid Signed-off-by: Linus Walleij --- drivers/gpio/gpio-pca953x.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c index e422568e14ad..4a8d0fe60e0c 100644 --- a/drivers/gpio/gpio-pca953x.c +++ b/drivers/gpio/gpio-pca953x.c @@ -380,6 +380,7 @@ static void pca953x_gpio_set_multiple(struct gpio_chip *gc, if (bank_mask) { bank_val = bits[bank / sizeof(*bits)] >> ((bank % sizeof(*bits)) * 8); + bank_val &= bank_mask; reg_val[bank] = (reg_val[bank] & ~bank_mask) | bank_val; } } From 7f8d61f005228fc48e6e2ca3c9af3302cd4870af Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 3 Nov 2016 13:09:24 +0100 Subject: [PATCH 435/792] percpu: use notrace variant of preempt_disable/preempt_enable Commit 345ddcc882d8 ("ftrace: Have set_ftrace_pid use the bitmap like events do") added a couple of this_cpu_read calls to the ftrace code. On x86 this is not a problem, since it has single instructions to read percpu data. Other architectures which use the generic variant now have additional preempt_disable and preempt_enable calls in the core ftrace code. This may lead to recursive calls and in result to a dead machine, e.g. if preemption and debugging options are enabled. To fix this use the notrace variant of preempt_disable and preempt_enable within the generic percpu code. Reported-and-bisected-by: Sebastian Ott Tested-by: Sebastian Ott Fixes: 345ddcc882d8 ("ftrace: Have set_ftrace_pid use the bitmap like events do") Signed-off-by: Heiko Carstens Acked-by: Steven Rostedt Signed-off-by: Martin Schwidefsky --- include/asm-generic/percpu.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/asm-generic/percpu.h b/include/asm-generic/percpu.h index 40e887068da2..0504ef8f3aa3 100644 --- a/include/asm-generic/percpu.h +++ b/include/asm-generic/percpu.h @@ -118,9 +118,9 @@ do { \ #define this_cpu_generic_read(pcp) \ ({ \ typeof(pcp) __ret; \ - preempt_disable(); \ + preempt_disable_notrace(); \ __ret = raw_cpu_generic_read(pcp); \ - preempt_enable(); \ + preempt_enable_notrace(); \ __ret; \ }) From 386377b5473043c09b2de40bfe5abfb0fc87e1b4 Mon Sep 17 00:00:00 2001 From: Phil Reid Date: Tue, 8 Nov 2016 13:18:11 +0800 Subject: [PATCH 436/792] gpio: pca953x: Move memcpy into mutex lock for set multiple Need to ensure that reg_output is not updated while setting multiple bits. This makes the mutex locking behaviour for the set_multiple call consistent with that of the set_value call. Cc: stable@vger.kernel.org Fixes: b4818afeacbd ("gpio: pca953x: Add set_multiple to allow multiple") Signed-off-by: Phil Reid Signed-off-by: Linus Walleij --- drivers/gpio/gpio-pca953x.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c index 4a8d0fe60e0c..fe731f094257 100644 --- a/drivers/gpio/gpio-pca953x.c +++ b/drivers/gpio/gpio-pca953x.c @@ -372,8 +372,8 @@ static void pca953x_gpio_set_multiple(struct gpio_chip *gc, bank_shift = fls((chip->gpio_chip.ngpio - 1) / BANK_SZ); - memcpy(reg_val, chip->reg_output, NBANK(chip)); mutex_lock(&chip->i2c_lock); + memcpy(reg_val, chip->reg_output, NBANK(chip)); for (bank = 0; bank < NBANK(chip); bank++) { bank_mask = mask[bank / sizeof(*mask)] >> ((bank % sizeof(*mask)) * 8); @@ -608,7 +608,6 @@ static int pca953x_irq_setup(struct pca953x_chip *chip, if (client->irq && irq_base != -1 && (chip->driver_data & PCA_INT)) { - ret = pca953x_read_regs(chip, chip->regs->input, chip->irq_stat); if (ret) From 027a9fe6835620422b6713892175716f3613dd9d Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sun, 30 Oct 2016 22:18:45 +0100 Subject: [PATCH 437/792] ALSA: info: Limit the proc text input size The ALSA proc handler allows currently the write in the unlimited size until kmalloc() fails. But basically the write is supposed to be only for small inputs, mostly for one line inputs, and we don't have to handle too large sizes at all. Since the kmalloc error results in the kernel warning, it's better to limit the size beforehand. This patch adds the limit of 16kB, which must be large enough for the currently existing code. Cc: stable@vger.kernel.org # v4.2+ Signed-off-by: Takashi Iwai --- sound/core/info.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/core/info.c b/sound/core/info.c index 895362a696c9..291d6ed80d80 100644 --- a/sound/core/info.c +++ b/sound/core/info.c @@ -329,6 +329,9 @@ static ssize_t snd_info_text_entry_write(struct file *file, if (!valid_pos(pos, count)) return -EIO; next = pos + count; + /* don't handle too large text inputs */ + if (next > 16 * 1024) + return -EIO; mutex_lock(&entry->access); buf = data->wbuffer; if (!buf) { From 6809cd682b82dfff47943850d1a8c714f971b5ca Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sun, 30 Oct 2016 22:13:19 +0100 Subject: [PATCH 438/792] ALSA: info: Return error for invalid read/write Currently the ALSA proc handler allows read or write even if the proc file were write-only or read-only. It's mostly harmless, does thing but allocating memory and ignores the input/output. But it doesn't tell user about the invalid use, and it's confusing and inconsistent in comparison with other proc files. This patch adds some sanity checks and let the proc handler returning an -EIO error when the invalid read/write is performed. Cc: # v4.2+ Signed-off-by: Takashi Iwai --- sound/core/info.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/sound/core/info.c b/sound/core/info.c index 291d6ed80d80..8ab72e0f5932 100644 --- a/sound/core/info.c +++ b/sound/core/info.c @@ -325,6 +325,8 @@ static ssize_t snd_info_text_entry_write(struct file *file, size_t next; int err = 0; + if (!entry->c.text.write) + return -EIO; pos = *offset; if (!valid_pos(pos, count)) return -EIO; @@ -369,7 +371,9 @@ static int snd_info_seq_show(struct seq_file *seq, void *p) struct snd_info_private_data *data = seq->private; struct snd_info_entry *entry = data->entry; - if (entry->c.text.read) { + if (!entry->c.text.read) { + return -EIO; + } else { data->rbuffer->buffer = (char *)seq; /* XXX hack! */ entry->c.text.read(entry, data->rbuffer); } From fba4f8e5c49443ddb1511f8f548ac801a693d7b7 Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Mon, 17 Oct 2016 12:06:21 +0100 Subject: [PATCH 439/792] iommu/arm-smmu: Work around ARM DMA configuration The 32-bit ARM DMA configuration code predates the IOMMU core's default domain functionality, and instead relies on allocating its own domains and attaching any devices using the generic IOMMU binding to them. Unfortunately, it does this relatively early on in the creation of the device, before we've seen our add_device callback, which leads us to attempt to operate on a half-configured master. To avoid a crash, check for this situation on attach, but refuse to play, as there's nothing we can do. This at least allows VFIO to keep working for people who update their 32-bit DTs to the generic binding, albeit with a few (innocuous) warnings from the DMA layer on boot. Signed-off-by: Robin Murphy Signed-off-by: Will Deacon Signed-off-by: Joerg Roedel --- drivers/iommu/arm-smmu.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c index c841eb7a1a74..3af7f8f62d0a 100644 --- a/drivers/iommu/arm-smmu.c +++ b/drivers/iommu/arm-smmu.c @@ -1228,6 +1228,16 @@ static int arm_smmu_attach_dev(struct iommu_domain *domain, struct device *dev) return -ENXIO; } + /* + * FIXME: The arch/arm DMA API code tries to attach devices to its own + * domains between of_xlate() and add_device() - we have no way to cope + * with that, so until ARM gets converted to rely on groups and default + * domains, just say no (but more politely than by dereferencing NULL). + * This should be at least a WARN_ON once that's sorted. + */ + if (!fwspec->iommu_priv) + return -ENODEV; + smmu = fwspec_smmu(fwspec); /* Ensure that the domain is finalised */ ret = arm_smmu_init_domain_context(domain, smmu); From ec615f43d3b61edcfdc4d8d1f672be1059573d1b Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Thu, 3 Nov 2016 17:39:07 +0000 Subject: [PATCH 440/792] iommu/arm-smmu: Don't inadvertently reject multiple SMMUv3s We now delay installing our per-bus iommu_ops until we know an SMMU has successfully probed, as they don't serve much purpose beforehand, and doing so also avoids fights between multiple IOMMU drivers in a single kernel. However, the upshot of passing the return value of bus_set_iommu() back from our probe function is that if there happens to be more than one SMMUv3 device in a system, the second and subsequent probes will wind up returning -EBUSY to the driver core and getting torn down again. Avoid re-setting ops if ours are already installed, so that any genuine failures stand out. Fixes: 08d4ca2a672b ("iommu/arm-smmu: Support non-PCI devices with SMMUv3") CC: Lorenzo Pieralisi CC: Hanjun Guo Signed-off-by: Robin Murphy Signed-off-by: Joerg Roedel --- drivers/iommu/arm-smmu-v3.c | 25 +++++++++++++++++-------- 1 file changed, 17 insertions(+), 8 deletions(-) diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c index 15c01c3cd540..e6f9b2d745ca 100644 --- a/drivers/iommu/arm-smmu-v3.c +++ b/drivers/iommu/arm-smmu-v3.c @@ -2636,17 +2636,26 @@ static int arm_smmu_device_dt_probe(struct platform_device *pdev) /* And we're up. Go go go! */ of_iommu_set_ops(dev->of_node, &arm_smmu_ops); #ifdef CONFIG_PCI - pci_request_acs(); - ret = bus_set_iommu(&pci_bus_type, &arm_smmu_ops); - if (ret) - return ret; + if (pci_bus_type.iommu_ops != &arm_smmu_ops) { + pci_request_acs(); + ret = bus_set_iommu(&pci_bus_type, &arm_smmu_ops); + if (ret) + return ret; + } #endif #ifdef CONFIG_ARM_AMBA - ret = bus_set_iommu(&amba_bustype, &arm_smmu_ops); - if (ret) - return ret; + if (amba_bustype.iommu_ops != &arm_smmu_ops) { + ret = bus_set_iommu(&amba_bustype, &arm_smmu_ops); + if (ret) + return ret; + } #endif - return bus_set_iommu(&platform_bus_type, &arm_smmu_ops); + if (platform_bus_type.iommu_ops != &arm_smmu_ops) { + ret = bus_set_iommu(&platform_bus_type, &arm_smmu_ops); + if (ret) + return ret; + } + return 0; } static int arm_smmu_device_remove(struct platform_device *pdev) From 3c117b543528b0d25801bd75444037dd0fcd2b8d Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Wed, 2 Nov 2016 17:31:32 +0000 Subject: [PATCH 441/792] iommu/arm-smmu: Check that iommu_fwspecs are ours We seem to have forgotten to check that iommu_fwspecs actually belong to us before we go ahead and dereference their private data. Oops. Fixes: 021bb8420d44 ("iommu/arm-smmu: Wire up generic configuration support") Signed-off-by: Robin Murphy Signed-off-by: Joerg Roedel --- drivers/iommu/arm-smmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c index 3af7f8f62d0a..d388629ab990 100644 --- a/drivers/iommu/arm-smmu.c +++ b/drivers/iommu/arm-smmu.c @@ -1400,7 +1400,7 @@ static int arm_smmu_add_device(struct device *dev) fwspec = dev->iommu_fwspec; if (ret) goto out_free; - } else if (fwspec) { + } else if (fwspec && fwspec->ops == &arm_smmu_ops) { smmu = arm_smmu_get_by_node(to_of_node(fwspec->iommu_fwnode)); } else { return -ENODEV; From 8c82d6ec5abcf9691d37f329bf5f42f6868405db Mon Sep 17 00:00:00 2001 From: Robin Murphy Date: Mon, 7 Nov 2016 18:25:09 +0000 Subject: [PATCH 442/792] iommu/arm-smmu: Fix out-of-bounds dereference When we iterate a master's config entries, what we generally care about is the entry's stream map index, rather than the entry index itself, so it's nice to have the iterator automatically assign the former from the latter. Unfortunately, booting with KASAN reveals the oversight that using a simple comma operator results in the entry index being dereferenced before being checked for validity, so we always access one element past the end of the fwspec array. Flip things around so that the check always happens before the index may be dereferenced. Fixes: adfec2e709d2 ("iommu/arm-smmu: Convert to iommu_fwspec") Reported-by: Mark Rutland Signed-off-by: Robin Murphy Acked-by: Will Deacon Signed-off-by: Joerg Roedel --- drivers/iommu/arm-smmu.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c index d388629ab990..8f7281444551 100644 --- a/drivers/iommu/arm-smmu.c +++ b/drivers/iommu/arm-smmu.c @@ -324,8 +324,10 @@ struct arm_smmu_master_cfg { #define INVALID_SMENDX -1 #define __fwspec_cfg(fw) ((struct arm_smmu_master_cfg *)fw->iommu_priv) #define fwspec_smmu(fw) (__fwspec_cfg(fw)->smmu) +#define fwspec_smendx(fw, i) \ + (i >= fw->num_ids ? INVALID_SMENDX : __fwspec_cfg(fw)->smendx[i]) #define for_each_cfg_sme(fw, i, idx) \ - for (i = 0; idx = __fwspec_cfg(fw)->smendx[i], i < fw->num_ids; ++i) + for (i = 0; idx = fwspec_smendx(fw, i), i < fw->num_ids; ++i) struct arm_smmu_device { struct device *dev; From bea64033dd7b5fb6296eda8266acab6364ce1554 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Tue, 8 Nov 2016 15:08:26 +0100 Subject: [PATCH 443/792] iommu/vt-d: Fix dead-locks in disable_dmar_iommu() path It turns out that the disable_dmar_iommu() code-path tried to get the device_domain_lock recursivly, which will dead-lock when this code runs on dmar removal. Fix both code-paths that could lead to the dead-lock. Fixes: 55d940430ab9 ('iommu/vt-d: Get rid of domain->iommu_lock') Signed-off-by: Joerg Roedel --- drivers/iommu/intel-iommu.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c index a4407eabf0e6..3965e73db51c 100644 --- a/drivers/iommu/intel-iommu.c +++ b/drivers/iommu/intel-iommu.c @@ -1711,6 +1711,7 @@ static void disable_dmar_iommu(struct intel_iommu *iommu) if (!iommu->domains || !iommu->domain_ids) return; +again: spin_lock_irqsave(&device_domain_lock, flags); list_for_each_entry_safe(info, tmp, &device_domain_list, global) { struct dmar_domain *domain; @@ -1723,10 +1724,19 @@ static void disable_dmar_iommu(struct intel_iommu *iommu) domain = info->domain; - dmar_remove_one_dev_info(domain, info->dev); + __dmar_remove_one_dev_info(info); - if (!domain_type_is_vm_or_si(domain)) + if (!domain_type_is_vm_or_si(domain)) { + /* + * The domain_exit() function can't be called under + * device_domain_lock, as it takes this lock itself. + * So release the lock here and re-run the loop + * afterwards. + */ + spin_unlock_irqrestore(&device_domain_lock, flags); domain_exit(domain); + goto again; + } } spin_unlock_irqrestore(&device_domain_lock, flags); From 7ee7e87dfb158e79019ea1d5ea1b0e6f2bc93ee4 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 7 Nov 2016 19:57:00 +0100 Subject: [PATCH 444/792] genirq: Use irq type from irqdata instead of irqdesc The type flags in the irq descriptor are there for historical reasons and only updated via irq_modify_status() or irq_set_type(). Both functions also update the type flags in irqdata. __setup_irq() is the only left over user of the type flags in the irq descriptor. If __setup_irq() is called with empty irq type flags, then the type flags are retrieved from irqdata. If an interrupt is shared, then the type flags are compared with the type flags stored in the irq descriptor. On x86 the ioapic does not have a irq_set_type() callback because the type is defined in the BIOS tables and cannot be changed. The type is stored in irqdata at setup time without updating the type data in the irq descriptor. As a result the comparison described above fails. There is no point in updating the irq descriptor flags because the only relevant storage is irqdata. Use the type flags from irqdata for both retrieval and comparison in __setup_irq() instead. Aside of that the print out in case of non matching type flags has the old and new type flags arguments flipped. Fix that as well. For correctness sake the flags stored in the irq descriptor should be removed, but this is beyond the scope of this bugfix and will be done in a later patch. Fixes: 4b357daed698 ("genirq: Look-up trigger type if not specified by caller") Reported-and-tested-by: Mika Westerberg Signed-off-by: Thomas Gleixner Cc: Marc Zyngier Cc: Jon Hunter Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1611072020360.3501@nanos Signed-off-by: Thomas Gleixner --- kernel/irq/manage.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c index 9c4d30483264..6b669593e7eb 100644 --- a/kernel/irq/manage.c +++ b/kernel/irq/manage.c @@ -1341,12 +1341,12 @@ __setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new) } else if (new->flags & IRQF_TRIGGER_MASK) { unsigned int nmsk = new->flags & IRQF_TRIGGER_MASK; - unsigned int omsk = irq_settings_get_trigger_mask(desc); + unsigned int omsk = irqd_get_trigger_type(&desc->irq_data); if (nmsk != omsk) /* hope the handler works with current trigger mode */ pr_warn("irq %d uses trigger mode %u; requested %u\n", - irq, nmsk, omsk); + irq, omsk, nmsk); } *old_ptr = new; From a29d126027c781eaa305ecae432bb04d41e198c5 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 8 Nov 2016 14:52:18 +0100 Subject: [PATCH 445/792] drm/amdgpu/powerplay/smu7: fix unintialized data usage A recent bugfix replaced an out-of-bounds access with direct use of unintialized data: drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c: In function 'smu7_patch_limits_vddc': drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:2033:6: error: 'vddc' may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:2146:11: note: 'vddc' was declared here drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:2033:6: error: 'vddci' may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:2146:17: note: 'vddci' was declared here uint32_t vddc, vddci; This initializes the data as before using the correct type. Fixes: 77f7f71f5be1 ("drm/amdgpu/powerplay/smu7: fix static checker warning") Signed-off-by: Arnd Bergmann Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c index 75854021f403..51fb86f20c21 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c @@ -2133,9 +2133,11 @@ static int smu7_patch_limits_vddc(struct pp_hwmgr *hwmgr, struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend); if (tab) { + vddc = tab->vddc; smu7_patch_ppt_v0_with_vdd_leakage(hwmgr, &vddc, &data->vddc_leakage); tab->vddc = vddc; + vddci = tab->vddci; smu7_patch_ppt_v0_with_vdd_leakage(hwmgr, &vddci, &data->vddci_leakage); tab->vddci = vddci; From f20024d8ba6bc8abf8d0ec12eabfdedd9935fff2 Mon Sep 17 00:00:00 2001 From: Andrew Shadura Date: Thu, 3 Nov 2016 11:09:24 +0100 Subject: [PATCH 446/792] drm/amd/powerplay: return false instead of -EINVAL Returning -EINVAL from a bool-returning function phm_check_smc_update_required_for_display_configuration has an unexpected effect of returning true, which is probably not what was intended. Replace -EINVAL by false. The only place this function is called from is psm_adjust_power_state_dynamic in drivers/gpu/drm/amd/powerplay/eventmgr/psm.c:106: if (!equal || phm_check_smc_update_required_for_display_configuration(hwmgr)) { phm_apply_state_adjust_rules(hwmgr, requested, pcurrent); phm_set_power_state(hwmgr, &pcurrent->hardware, &requested->hardware); hwmgr->current_ps = requested; } It seems to expect a boolean value here. This issue has been found using the following Coccinelle semantic patch written by Peter Senna Tschudin: @@ identifier f; constant C; typedef bool; @@ bool f (...){ <+... * return -C; ...+> } Reviewed-by: Alex Deucher Signed-off-by: Andrew Shadura Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/hardwaremanager.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/hardwaremanager.c b/drivers/gpu/drm/amd/powerplay/hwmgr/hardwaremanager.c index 14f8c1f4da3d..0723758ed065 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/hardwaremanager.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/hardwaremanager.c @@ -272,7 +272,7 @@ bool phm_check_smc_update_required_for_display_configuration(struct pp_hwmgr *hw PHM_FUNC_CHECK(hwmgr); if (hwmgr->hwmgr_func->check_smc_update_required_for_display_configuration == NULL) - return -EINVAL; + return false; return hwmgr->hwmgr_func->check_smc_update_required_for_display_configuration(hwmgr); } From 76a08404742e6da79f1e5002ac39033dc79d94da Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Tue, 8 Nov 2016 08:47:14 -0800 Subject: [PATCH 447/792] Revert "ARC: build: retire old toggles" This has caused a bunch of build failures at a few sites, with GNU 2015.12 and older as the assembler seems to need -mlock to be able to grok llock/scond instructions for ARC700 builds. different places since the older tools still seem to release of tools which most people are using seem to trip with the -mlock flag not being passed. This reverts commit c3005475889c7c730638f95d13be3360f0b33e98. --- arch/arc/Makefile | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arc/Makefile b/arch/arc/Makefile index 864adad52280..aa82d13d4213 100644 --- a/arch/arc/Makefile +++ b/arch/arc/Makefile @@ -50,6 +50,9 @@ atleast_gcc44 := $(call cc-ifversion, -ge, 0404, y) cflags-$(atleast_gcc44) += -fsection-anchors +cflags-$(CONFIG_ARC_HAS_LLSC) += -mlock +cflags-$(CONFIG_ARC_HAS_SWAPE) += -mswape + ifdef CONFIG_ISA_ARCV2 ifndef CONFIG_ARC_HAS_LL64 From 66619433d0fdf3e7d9f573993217b0d2cc3044fa Mon Sep 17 00:00:00 2001 From: Noam Camus Date: Tue, 8 Nov 2016 11:58:23 +0200 Subject: [PATCH 448/792] ARC: [plat-eznps] remove IPI clear from SMP operations Today we register to plat_smp_ops.clear() method which actually is acking the IPI. However this is already taking care by our irqchip driver specifically by the irq_chip.irq_eoi() method. This is perfect timing where it should be done and no special handling is needed at plat_smp_ops.clear(). Signed-off-by: Noam Camus Signed-off-by: Vineet Gupta --- arch/arc/plat-eznps/smp.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/arch/arc/plat-eznps/smp.c b/arch/arc/plat-eznps/smp.c index 5e901f86e4bd..56a4c8522f11 100644 --- a/arch/arc/plat-eznps/smp.c +++ b/arch/arc/plat-eznps/smp.c @@ -140,16 +140,10 @@ static void eznps_init_per_cpu(int cpu) mtm_enable_core(cpu); } -static void eznps_ipi_clear(int irq) -{ - write_aux_reg(CTOP_AUX_IACK, 1 << irq); -} - struct plat_smp_ops plat_smp_ops = { .info = smp_cpuinfo_buf, .init_early_smp = eznps_init_cpumasks, .cpu_kick = eznps_smp_wakeup_cpu, .ipi_send = eznps_ipi_send, .init_per_cpu = eznps_init_per_cpu, - .ipi_clear = eznps_ipi_clear, }; From 19dbc76228899be555b84a09fd3a364c2ce86bbb Mon Sep 17 00:00:00 2001 From: Noam Camus Date: Tue, 8 Nov 2016 15:20:59 +0200 Subject: [PATCH 449/792] ARC: [plat-eznps] set default baud for early console For CONFIG_SERIAL_EARLYCON we need 800MHz for NPS SoC The early console driver uses BASE_BAUD and not using dtb. The default of 50MHz is NOT good for NPS SoC. Signed-off-by: Noam Camus Signed-off-by: Vineet Gupta --- arch/arc/kernel/devtree.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arc/kernel/devtree.c b/arch/arc/kernel/devtree.c index f1e07c2344f8..3b67f538f142 100644 --- a/arch/arc/kernel/devtree.c +++ b/arch/arc/kernel/devtree.c @@ -31,6 +31,8 @@ static void __init arc_set_early_base_baud(unsigned long dt_root) arc_base_baud = 166666666; /* Fixed 166.6MHz clk (TB10x) */ else if (of_flat_dt_is_compatible(dt_root, "snps,arc-sdp")) arc_base_baud = 33333333; /* Fixed 33MHz clk (AXS10x) */ + else if (of_flat_dt_is_compatible(dt_root, "ezchip,arc-nps")) + arc_base_baud = 800000000; /* Fixed 800MHz clk (NPS) */ else arc_base_baud = 50000000; /* Fixed default 50MHz */ } From 34e71e4cbb8eb467dbcfb3afbd2b95ff2b08f482 Mon Sep 17 00:00:00 2001 From: Yuriy Kolerov Date: Tue, 8 Nov 2016 10:08:31 +0300 Subject: [PATCH 450/792] ARC: IRQ: Do not use hwirq as virq and vice versa This came up when reviewing code to address missing IRQ affinity setting in AXS103 platform and/or implementing hierarchical IRQ domains - smp_ipi_irq_setup() callers pass hwirq but in turn calls request_percpu_irq() which expects a linux virq. So invoke irq_find_mapping() to do the conversion (also explicitify this in code by renaming the args appropriately) - idu_of_init()/idu_cascade_isr() were similarly using linux virq where hwirq is expected, so do the conversion using irqd_to_hwirq() helper Signed-off-by: Yuriy Kolerov [vgupta: made changelog a bit concise a bit] Signed-off-by: Vineet Gupta --- arch/arc/include/asm/smp.h | 4 ++-- arch/arc/kernel/mcip.c | 19 +++++++++---------- arch/arc/kernel/smp.c | 13 +++++++++---- 3 files changed, 20 insertions(+), 16 deletions(-) diff --git a/arch/arc/include/asm/smp.h b/arch/arc/include/asm/smp.h index 89fdd1b0a76e..0861007d9ef3 100644 --- a/arch/arc/include/asm/smp.h +++ b/arch/arc/include/asm/smp.h @@ -37,9 +37,9 @@ extern const char *arc_platform_smp_cpuinfo(void); * API expected BY platform smp code (FROM arch smp code) * * smp_ipi_irq_setup: - * Takes @cpu and @irq to which the arch-common ISR is hooked up + * Takes @cpu and @hwirq to which the arch-common ISR is hooked up */ -extern int smp_ipi_irq_setup(int cpu, int irq); +extern int smp_ipi_irq_setup(int cpu, irq_hw_number_t hwirq); /* * struct plat_smp_ops - SMP callbacks provided by platform to ARC SMP diff --git a/arch/arc/kernel/mcip.c b/arch/arc/kernel/mcip.c index c424d5abc318..6d18bb871926 100644 --- a/arch/arc/kernel/mcip.c +++ b/arch/arc/kernel/mcip.c @@ -207,16 +207,15 @@ static struct irq_chip idu_irq_chip = { }; -static int idu_first_irq; +static irq_hw_number_t idu_first_hwirq; static void idu_cascade_isr(struct irq_desc *desc) { - struct irq_domain *domain = irq_desc_get_handler_data(desc); - unsigned int core_irq = irq_desc_get_irq(desc); - unsigned int idu_irq; + struct irq_domain *idu_domain = irq_desc_get_handler_data(desc); + irq_hw_number_t core_hwirq = irqd_to_hwirq(irq_desc_get_irq_data(desc)); + irq_hw_number_t idu_hwirq = core_hwirq - idu_first_hwirq; - idu_irq = core_irq - idu_first_irq; - generic_handle_irq(irq_find_mapping(domain, idu_irq)); + generic_handle_irq(irq_find_mapping(idu_domain, idu_hwirq)); } static int idu_irq_map(struct irq_domain *d, unsigned int virq, irq_hw_number_t hwirq) @@ -282,7 +281,7 @@ idu_of_init(struct device_node *intc, struct device_node *parent) struct irq_domain *domain; /* Read IDU BCR to confirm nr_irqs */ int nr_irqs = of_irq_count(intc); - int i, irq; + int i, virq; struct mcip_bcr mp; READ_BCR(ARC_REG_MCIP_BCR, mp); @@ -303,11 +302,11 @@ idu_of_init(struct device_node *intc, struct device_node *parent) * however we need it to get the parent virq and set IDU handler * as first level isr */ - irq = irq_of_parse_and_map(intc, i); + virq = irq_of_parse_and_map(intc, i); if (!i) - idu_first_irq = irq; + idu_first_hwirq = irqd_to_hwirq(irq_get_irq_data(virq)); - irq_set_chained_handler_and_data(irq, idu_cascade_isr, domain); + irq_set_chained_handler_and_data(virq, idu_cascade_isr, domain); } __mcip_cmd(CMD_IDU_ENABLE, 0); diff --git a/arch/arc/kernel/smp.c b/arch/arc/kernel/smp.c index f00029e9cbe4..88674d972c9d 100644 --- a/arch/arc/kernel/smp.c +++ b/arch/arc/kernel/smp.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include @@ -353,20 +354,24 @@ irqreturn_t do_IPI(int irq, void *dev_id) */ static DEFINE_PER_CPU(int, ipi_dev); -int smp_ipi_irq_setup(int cpu, int irq) +int smp_ipi_irq_setup(int cpu, irq_hw_number_t hwirq) { int *dev = per_cpu_ptr(&ipi_dev, cpu); + unsigned int virq = irq_find_mapping(NULL, hwirq); + + if (!virq) + panic("Cannot find virq for root domain and hwirq=%lu", hwirq); /* Boot cpu calls request, all call enable */ if (!cpu) { int rc; - rc = request_percpu_irq(irq, do_IPI, "IPI Interrupt", dev); + rc = request_percpu_irq(virq, do_IPI, "IPI Interrupt", dev); if (rc) - panic("Percpu IRQ request failed for %d\n", irq); + panic("Percpu IRQ request failed for %u\n", virq); } - enable_percpu_irq(irq, 0); + enable_percpu_irq(virq, 0); return 0; } From 0a0a047def15b7c8bcd27671d2be2de3d37fb30d Mon Sep 17 00:00:00 2001 From: Yuriy Kolerov Date: Tue, 8 Nov 2016 10:08:32 +0300 Subject: [PATCH 451/792] ARCv2: MCIP: Use IDU_M_DISTRI_DEST mode if there is only 1 destination core ARC linux uses 2 distribution modes for common interrupts: round robin mode (IDU_M_DISTRI_RR) and a simple destination mode (IDU_M_DISTRI_DEST). The first one is used when more than 1 cores may handle a common interrupt and the second one is used when only 1 core may handle a common interrupt. However idu_irq_set_affinity() always sets IDU_M_DISTRI_RR for all affinity values. But there is no sense in setting of such mode if only 1 core must handle a common interrupt. Signed-off-by: Yuriy Kolerov Signed-off-by: Vineet Gupta --- arch/arc/kernel/mcip.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/arch/arc/kernel/mcip.c b/arch/arc/kernel/mcip.c index 6d18bb871926..f39142acc89e 100644 --- a/arch/arc/kernel/mcip.c +++ b/arch/arc/kernel/mcip.c @@ -181,6 +181,8 @@ idu_irq_set_affinity(struct irq_data *data, const struct cpumask *cpumask, { unsigned long flags; cpumask_t online; + unsigned int destination_bits; + unsigned int distribution_mode; /* errout if no online cpu per @cpumask */ if (!cpumask_and(&online, cpumask, cpu_online_mask)) @@ -188,8 +190,15 @@ idu_irq_set_affinity(struct irq_data *data, const struct cpumask *cpumask, raw_spin_lock_irqsave(&mcip_lock, flags); - idu_set_dest(data->hwirq, cpumask_bits(&online)[0]); - idu_set_mode(data->hwirq, IDU_M_TRIG_LEVEL, IDU_M_DISTRI_RR); + destination_bits = cpumask_bits(&online)[0]; + idu_set_dest(data->hwirq, destination_bits); + + if (ffs(destination_bits) == fls(destination_bits)) + distribution_mode = IDU_M_DISTRI_DEST; + else + distribution_mode = IDU_M_DISTRI_RR; + + idu_set_mode(data->hwirq, IDU_M_TRIG_LEVEL, distribution_mode); raw_spin_unlock_irqrestore(&mcip_lock, flags); From 16d917b130d782b94fa02afc7bdf0d4aae689da4 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Tue, 8 Nov 2016 14:25:24 -0600 Subject: [PATCH 452/792] PCI: Don't attempt to claim shadow copies of ROM If we're using a shadow copy of a PCI device ROM, the shadow copy is in RAM and the device never sees accesses to it and doesn't respond to it. We don't have to route the shadow range to the PCI device, and the device doesn't have to claim the range. Previously we treated the shadow copy as though it were the ROM BAR, and we failed to claim it because the region wasn't routed to the device: pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] pci_bus 0000:01: Allocating resources pci 0000:01:00.0: can't claim BAR 6 [mem 0x000c0000-0x000dffff]: no compatible bridge window The failure path of pcibios_allocate_dev_rom_resource() cleared out the resource start address, which also caused the following ioremap() warning: WARNING: CPU: 0 PID: 116 at /build/linux-akdJXO/linux-4.8.0/arch/x86/mm/ioremap.c:121 __ioremap_caller+0x1ec/0x370 ioremap on RAM at 0x0000000000000000 - 0x000000000001ffff Handle an option ROM shadow copy as RAM, without trying to insert it into the iomem resource tree. This fixes a regression caused by 0c0e0736acad ("PCI: Set ROM shadow location in arch code, not in PCI core"), which appeared in v4.6. The regression causes video device initialization to fail. This was reported on AMD Turks, but it likely affects others as well. Fixes: 0c0e0736acad ("PCI: Set ROM shadow location in arch code, not in PCI core") Reported-and-tested-by: Vecu Bosseur Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1627496 Link: https://bugzilla.kernel.org/show_bug.cgi?id=175391 Link: https://bugzilla.redhat.com/show_bug.cgi?id=1352272 Signed-off-by: Bjorn Helgaas CC: stable@vger.kernel.org # v4.6+ --- drivers/pci/setup-res.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/pci/setup-res.c b/drivers/pci/setup-res.c index 66c4d8f42233..9526e341988b 100644 --- a/drivers/pci/setup-res.c +++ b/drivers/pci/setup-res.c @@ -121,6 +121,14 @@ int pci_claim_resource(struct pci_dev *dev, int resource) return -EINVAL; } + /* + * If we have a shadow copy in RAM, the PCI device doesn't respond + * to the shadow range, so we don't need to claim it, and upstream + * bridges don't need to route the range to the device. + */ + if (res->flags & IORESOURCE_ROM_SHADOW) + return 0; + root = pci_find_parent_resource(dev, res); if (!root) { dev_info(&dev->dev, "can't claim BAR %d %pR: no compatible bridge window\n", From 8ae94224c9d72fc4d9aaac93b2d7833cf46d7141 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Fri, 4 Nov 2016 19:39:38 +0100 Subject: [PATCH 453/792] kbuild: add -fno-PIE MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Debian started to build the gcc with -fPIE by default so the kernel build ends before it starts properly with: |kernel/bounds.c:1:0: error: code model kernel does not support PIC mode Also add to KBUILD_AFLAGS due to: |gcc -Wp,-MD,arch/x86/entry/vdso/vdso32/.note.o.d … -mfentry -DCC_USING_FENTRY … vdso/vdso32/note.S |arch/x86/entry/vdso/vdso32/note.S:1:0: sorry, unimplemented: -mfentry isn’t supported for 32-bit in combination with -fpic Tagging it stable so it is possible to compile recent stable kernels as well. Cc: stable@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Michal Marek --- Makefile | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Makefile b/Makefile index 512e47a53e9a..58fc5d935ce6 100644 --- a/Makefile +++ b/Makefile @@ -622,6 +622,8 @@ include arch/$(SRCARCH)/Makefile KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks,) KBUILD_CFLAGS += $(call cc-disable-warning,maybe-uninitialized,) KBUILD_CFLAGS += $(call cc-disable-warning,frame-address,) +KBUILD_CFLAGS += $(call cc-option,-fno-PIE) +KBUILD_AFLAGS += $(call cc-option,-fno-PIE) ifdef CONFIG_LD_DEAD_CODE_DATA_ELIMINATION KBUILD_CFLAGS += $(call cc-option,-ffunction-sections,) From 8fbfef7f505bba60fb57078b7621270ee57cd1c4 Mon Sep 17 00:00:00 2001 From: WANG Cong Date: Thu, 3 Nov 2016 17:14:03 -0700 Subject: [PATCH 454/792] ipvs: use IPVS_CMD_ATTR_MAX for family.maxattr family.maxattr is the max index for policy[], the size of ops[] is determined with ARRAY_SIZE(). Reported-by: Andrey Konovalov Tested-by: Andrey Konovalov Cc: Pablo Neira Ayuso Signed-off-by: Cong Wang Signed-off-by: Simon Horman Signed-off-by: Pablo Neira Ayuso --- net/netfilter/ipvs/ip_vs_ctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c index c3c809b2e712..a6e44ef2ec9a 100644 --- a/net/netfilter/ipvs/ip_vs_ctl.c +++ b/net/netfilter/ipvs/ip_vs_ctl.c @@ -2845,7 +2845,7 @@ static struct genl_family ip_vs_genl_family = { .hdrsize = 0, .name = IPVS_GENL_NAME, .version = IPVS_GENL_VERSION, - .maxattr = IPVS_CMD_MAX, + .maxattr = IPVS_CMD_ATTR_MAX, .netnsok = true, /* Make ipvsadm to work on netns */ }; From fb9c9649a1d0a65a8f94f784aa18252a0dd584c1 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Sat, 29 Oct 2016 03:01:50 +0200 Subject: [PATCH 455/792] netfilter: connmark: ignore skbs with magic untracked conntrack objects The (percpu) untracked conntrack entries can end up with nonzero connmarks. The 'untracked' conntrack objects are merely a way to distinguish INVALID (i.e. protocol connection tracker says payload doesn't meet some requirements or packet was never seen by the connection tracking code) from packets that are intentionally not tracked (some icmpv6 types such as neigh solicitation, or by using 'iptables -j CT --notrack' option). Untracked conntrack objects are implementation detail, we might as well use invalid magic address instead to tell INVALID and UNTRACKED apart. Check skb->nfct for untracked dummy and behave as if skb->nfct is NULL. Reported-by: XU Tianwen Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/xt_connmark.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/netfilter/xt_connmark.c b/net/netfilter/xt_connmark.c index 69f78e96fdb4..b83e158e116a 100644 --- a/net/netfilter/xt_connmark.c +++ b/net/netfilter/xt_connmark.c @@ -44,7 +44,7 @@ connmark_tg(struct sk_buff *skb, const struct xt_action_param *par) u_int32_t newmark; ct = nf_ct_get(skb, &ctinfo); - if (ct == NULL) + if (ct == NULL || nf_ct_is_untracked(ct)) return XT_CONTINUE; switch (info->mode) { @@ -97,7 +97,7 @@ connmark_mt(const struct sk_buff *skb, struct xt_action_param *par) const struct nf_conn *ct; ct = nf_ct_get(skb, &ctinfo); - if (ct == NULL) + if (ct == NULL || nf_ct_is_untracked(ct)) return false; return ((ct->mark & info->mask) == info->mark) ^ info->invert; From 6114cc516dcc0d311badb83ad7db5aa4b611bea6 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Thu, 3 Nov 2016 14:44:42 +0100 Subject: [PATCH 456/792] netfilter: conntrack: fix CT target for UNSPEC helpers Thomas reports its not possible to attach the H.245 helper: iptables -t raw -A PREROUTING -p udp -j CT --helper H.245 iptables: No chain/target/match by that name. xt_CT: No such helper "H.245" This is because H.245 registers as NFPROTO_UNSPEC, but the CT target passes NFPROTO_IPV4/IPV6 to nf_conntrack_helper_try_module_get. We should treat UNSPEC as wildcard and ignore the l3num instead. Reported-by: Thomas Woerner Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_conntrack_helper.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/net/netfilter/nf_conntrack_helper.c b/net/netfilter/nf_conntrack_helper.c index 336e21559e01..7341adf7059d 100644 --- a/net/netfilter/nf_conntrack_helper.c +++ b/net/netfilter/nf_conntrack_helper.c @@ -138,9 +138,14 @@ __nf_conntrack_helper_find(const char *name, u16 l3num, u8 protonum) for (i = 0; i < nf_ct_helper_hsize; i++) { hlist_for_each_entry_rcu(h, &nf_ct_helper_hash[i], hnode) { - if (!strcmp(h->name, name) && - h->tuple.src.l3num == l3num && - h->tuple.dst.protonum == protonum) + if (strcmp(h->name, name)) + continue; + + if (h->tuple.src.l3num != NFPROTO_UNSPEC && + h->tuple.src.l3num != l3num) + continue; + + if (h->tuple.dst.protonum == protonum) return h; } } From e0df8cae6c16b9ba66a005079aa754b9eedc6efa Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Fri, 4 Nov 2016 16:54:58 +0100 Subject: [PATCH 457/792] netfilter: conntrack: refine gc worker heuristics Nicolas Dichtel says: After commit b87a2f9199ea ("netfilter: conntrack: add gc worker to remove timed-out entries"), netlink conntrack deletion events may be sent with a huge delay. Nicolas further points at this line: goal = min(nf_conntrack_htable_size / GC_MAX_BUCKETS_DIV, GC_MAX_BUCKETS); and indeed, this isn't optimal at all. Rationale here was to ensure that we don't block other work items for too long, even if nf_conntrack_htable_size is huge. But in order to have some guarantee about maximum time period where a scan of the full conntrack table completes we should always use a fixed slice size, so that once every N scans the full table has been examined at least once. We also need to balance this vs. the case where the system is either idle (i.e., conntrack table (almost) empty) or very busy (i.e. eviction happens from packet path). So, after some discussion with Nicolas: 1. want hard guarantee that we scan entire table at least once every X s -> need to scan fraction of table (get rid of upper bound) 2. don't want to eat cycles on idle or very busy system -> increase interval if we did not evict any entries 3. don't want to block other worker items for too long -> make fraction really small, and prefer small scan interval instead 4. Want reasonable short time where we detect timed-out entry when system went idle after a burst of traffic, while not doing scans all the time. -> Store next gc scan in worker, increasing delays when no eviction happened and shrinking delay when we see timed out entries. The old gc interval is turned into a max number, scans can now happen every jiffy if stale entries are present. Longest possible time period until an entry is evicted is now 2 minutes in worst case (entry expires right after it was deemed 'not expired'). Reported-by: Nicolas Dichtel Signed-off-by: Florian Westphal Acked-by: Nicolas Dichtel Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_conntrack_core.c | 49 ++++++++++++++++++++++++++----- 1 file changed, 41 insertions(+), 8 deletions(-) diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index df2f5a3901df..0f87e5d21be7 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -76,6 +76,7 @@ struct conntrack_gc_work { struct delayed_work dwork; u32 last_bucket; bool exiting; + long next_gc_run; }; static __read_mostly struct kmem_cache *nf_conntrack_cachep; @@ -83,9 +84,11 @@ static __read_mostly spinlock_t nf_conntrack_locks_all_lock; static __read_mostly DEFINE_SPINLOCK(nf_conntrack_locks_all_lock); static __read_mostly bool nf_conntrack_locks_all; +/* every gc cycle scans at most 1/GC_MAX_BUCKETS_DIV part of table */ #define GC_MAX_BUCKETS_DIV 64u -#define GC_MAX_BUCKETS 8192u -#define GC_INTERVAL (5 * HZ) +/* upper bound of scan intervals */ +#define GC_INTERVAL_MAX (2 * HZ) +/* maximum conntracks to evict per gc run */ #define GC_MAX_EVICTS 256u static struct conntrack_gc_work conntrack_gc_work; @@ -936,13 +939,13 @@ static noinline int early_drop(struct net *net, unsigned int _hash) static void gc_worker(struct work_struct *work) { unsigned int i, goal, buckets = 0, expired_count = 0; - unsigned long next_run = GC_INTERVAL; - unsigned int ratio, scanned = 0; struct conntrack_gc_work *gc_work; + unsigned int ratio, scanned = 0; + unsigned long next_run; gc_work = container_of(work, struct conntrack_gc_work, dwork.work); - goal = min(nf_conntrack_htable_size / GC_MAX_BUCKETS_DIV, GC_MAX_BUCKETS); + goal = nf_conntrack_htable_size / GC_MAX_BUCKETS_DIV; i = gc_work->last_bucket; do { @@ -982,17 +985,47 @@ static void gc_worker(struct work_struct *work) if (gc_work->exiting) return; + /* + * Eviction will normally happen from the packet path, and not + * from this gc worker. + * + * This worker is only here to reap expired entries when system went + * idle after a busy period. + * + * The heuristics below are supposed to balance conflicting goals: + * + * 1. Minimize time until we notice a stale entry + * 2. Maximize scan intervals to not waste cycles + * + * Normally, expired_count will be 0, this increases the next_run time + * to priorize 2) above. + * + * As soon as a timed-out entry is found, move towards 1) and increase + * the scan frequency. + * In case we have lots of evictions next scan is done immediately. + */ ratio = scanned ? expired_count * 100 / scanned : 0; - if (ratio >= 90 || expired_count == GC_MAX_EVICTS) + if (ratio >= 90 || expired_count == GC_MAX_EVICTS) { + gc_work->next_gc_run = 0; next_run = 0; + } else if (expired_count) { + gc_work->next_gc_run /= 2U; + next_run = msecs_to_jiffies(1); + } else { + if (gc_work->next_gc_run < GC_INTERVAL_MAX) + gc_work->next_gc_run += msecs_to_jiffies(1); + + next_run = gc_work->next_gc_run; + } gc_work->last_bucket = i; - schedule_delayed_work(&gc_work->dwork, next_run); + queue_delayed_work(system_long_wq, &gc_work->dwork, next_run); } static void conntrack_gc_work_init(struct conntrack_gc_work *gc_work) { INIT_DELAYED_WORK(&gc_work->dwork, gc_worker); + gc_work->next_gc_run = GC_INTERVAL_MAX; gc_work->exiting = false; } @@ -1885,7 +1918,7 @@ int nf_conntrack_init_start(void) nf_ct_untracked_status_or(IPS_CONFIRMED | IPS_UNTRACKED); conntrack_gc_work_init(&conntrack_gc_work); - schedule_delayed_work(&conntrack_gc_work.dwork, GC_INTERVAL); + queue_delayed_work(system_long_wq, &conntrack_gc_work.dwork, GC_INTERVAL_MAX); return 0; From 58c78e104d937c1f560fb10ed9bb2dcde0db4fcf Mon Sep 17 00:00:00 2001 From: Liping Zhang Date: Sun, 6 Nov 2016 14:40:01 +0800 Subject: [PATCH 458/792] netfilter: nf_tables: fix oops when inserting an element into a verdict map Dalegaard says: The following ruleset, when loaded with 'nft -f bad.txt' ----snip---- flush ruleset table ip inlinenat { map sourcemap { type ipv4_addr : verdict; } chain postrouting { ip saddr vmap @sourcemap accept } } add chain inlinenat test add element inlinenat sourcemap { 100.123.10.2 : jump test } ----snip---- results in a kernel oops: BUG: unable to handle kernel paging request at 0000000000001344 IP: [] nf_tables_check_loops+0x114/0x1f0 [nf_tables] [...] Call Trace: [] ? nft_data_init+0x13e/0x1a0 [nf_tables] [] nft_validate_register_store+0x60/0xb0 [nf_tables] [] nft_add_set_elem+0x545/0x5e0 [nf_tables] [] ? nft_table_lookup+0x30/0x60 [nf_tables] [] ? nla_strcmp+0x40/0x50 [] nf_tables_newsetelem+0x11e/0x210 [nf_tables] [] ? nla_validate+0x60/0x80 [] nfnetlink_rcv+0x354/0x5a7 [nfnetlink] Because we forget to fill the net pointer in bind_ctx, so dereferencing it may cause kernel crash. Reported-by: Dalegaard Signed-off-by: Liping Zhang Signed-off-by: Pablo Neira Ayuso --- net/netfilter/nf_tables_api.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 7d6a626b08f1..026581b04ea8 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -3568,6 +3568,7 @@ static int nft_add_set_elem(struct nft_ctx *ctx, struct nft_set *set, dreg = nft_type_to_reg(set->dtype); list_for_each_entry(binding, &set->bindings, list) { struct nft_ctx bind_ctx = { + .net = ctx->net, .afi = ctx->afi, .table = ctx->table, .chain = (struct nft_chain *)binding->chain, From 69e2d1e6c0af0dd7f18cfd434b008844568641a9 Mon Sep 17 00:00:00 2001 From: Varun Prakash Date: Sat, 5 Nov 2016 21:49:28 +0530 Subject: [PATCH 459/792] scsi: libcxgbi: fix incorrect DDP resource cleanup Before calling task_release_itt() task data is memset to zero because of which DDP context information is lost resulting in incorrect DDP resource cleanup, to fix this call task_release_itt() before memset. Signed-off-by: Varun Prakash Signed-off-by: Martin K. Petersen --- drivers/scsi/cxgbi/libcxgbi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/cxgbi/libcxgbi.c b/drivers/scsi/cxgbi/libcxgbi.c index d1421139e6ea..2ffe029ff2b6 100644 --- a/drivers/scsi/cxgbi/libcxgbi.c +++ b/drivers/scsi/cxgbi/libcxgbi.c @@ -2081,9 +2081,10 @@ void cxgbi_cleanup_task(struct iscsi_task *task) /* never reached the xmit task callout */ if (tdata->skb) __kfree_skb(tdata->skb); - memset(tdata, 0, sizeof(*tdata)); task_release_itt(task, task->hdr_itt); + memset(tdata, 0, sizeof(*tdata)); + iscsi_tcp_cleanup_task(task); } EXPORT_SYMBOL_GPL(cxgbi_cleanup_task); From 04dfaa53a0b6e66b328a5bc549e3af8f8b6eac02 Mon Sep 17 00:00:00 2001 From: Mauricio Faria de Oliveira Date: Mon, 7 Nov 2016 17:53:30 -0200 Subject: [PATCH 460/792] scsi: qla2xxx: do not queue commands when unloading When the driver is unloading, in qla2x00_remove_one(), there is a single call/point in time to abort ongoing commands, qla2x00_abort_all_cmds(), which is still several steps away from the call to scsi_remove_host(). If more commands continue to arrive and be processed during that interval, when the driver is tearing down and releasing its structures, it might potentially hit an oops due to invalid memory access: Unable to handle kernel paging request for data at address 0x00000138 <...> NIP [d000000004700a40] qla2xxx_queuecommand+0x80/0x3f0 [qla2xxx] LR [d000000004700a10] qla2xxx_queuecommand+0x50/0x3f0 [qla2xxx] So, fail commands in qla2xxx_queuecommand() if the UNLOADING bit is set. Signed-off-by: Mauricio Faria de Oliveira Acked-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_os.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 4d99c3b37687..e5db47443668 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -707,6 +707,11 @@ qla2xxx_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd) srb_t *sp; int rval; + if (unlikely(test_bit(UNLOADING, &base_vha->dpc_flags))) { + cmd->result = DID_NO_CONNECT << 16; + goto qc24_fail_command; + } + if (ha->flags.eeh_busy) { if (ha->flags.pci_channel_io_perm_failure) { ql_dbg(ql_dbg_aer, vha, 0x9010, From 1535aa75a3d8320374f82d198e3900d5b0969d7e Mon Sep 17 00:00:00 2001 From: Mauricio Faria de Oliveira Date: Mon, 7 Nov 2016 17:53:31 -0200 Subject: [PATCH 461/792] scsi: qla2xxx: fix invalid DMA access after command aborts in PCI device remove If a command is aborted in the kernel but not in the adapter, it might be considered complete and its DMA memory released, but it is still alive in the adapter, which will trigger an invalid DMA access upon its completion (in the DMA operations to deliver the command response to the driver). On powerpc platforms with IOMMU/EEH capabilities, the problem is observed during PCI device removal with ongoing IO requests -- which might trigger an EEH event very often, pointing to a 'TCE Request Page Access Error'. In that path, which is qla2x00_remove_one(), the commands are aborted in qla2x00_abort_all_cmds(), which does not perform an abort in the adapter as is done in qla2xxx_eh_abort() for example. So, this patch changes qla2x00_abort_all_cmds() to abort commands in the adapter too, with a call to qla2xxx_eh_abort(), which already implements all the logic to submit abort requests and handle responses. Reported-by: Naresh Bannoth Signed-off-by: Mauricio Faria de Oliveira Acked-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_os.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index e5db47443668..567fa080e261 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -1456,6 +1456,15 @@ qla2x00_abort_all_cmds(scsi_qla_host_t *vha, int res) for (cnt = 1; cnt < req->num_outstanding_cmds; cnt++) { sp = req->outstanding_cmds[cnt]; if (sp) { + /* Get a reference to the sp and drop the lock. + * The reference ensures this sp->done() call + * - and not the call in qla2xxx_eh_abort() - + * ends the SCSI command (with result 'res'). + */ + sp_get(sp); + spin_unlock_irqrestore(&ha->hardware_lock, flags); + qla2xxx_eh_abort(GET_CMD_SP(sp)); + spin_lock_irqsave(&ha->hardware_lock, flags); req->outstanding_cmds[cnt] = NULL; sp->done(vha, sp, res); } From 34a515d27c6573b6f550877b30dd5e0f440c3d8f Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Mon, 4 Jan 2016 16:34:22 -0800 Subject: [PATCH 462/792] drm/fsl-dcu: do not update when modifying irq registers The IRQ status and mask registers are not "double buffered" according to the reference manual. Hence, there is no extra transfer/update write needed when modifying these registers. Signed-off-by: Stefan Agner --- drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c index e04efbed1a54..cc2fde2ae5ef 100644 --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c @@ -59,8 +59,6 @@ static int fsl_dcu_drm_irq_init(struct drm_device *dev) regmap_write(fsl_dev->regmap, DCU_INT_STATUS, 0); regmap_write(fsl_dev->regmap, DCU_INT_MASK, ~0); - regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE, - DCU_UPDATE_MODE_READREG); return ret; } @@ -139,8 +137,6 @@ static irqreturn_t fsl_dcu_drm_irq(int irq, void *arg) drm_handle_vblank(dev, 0); regmap_write(fsl_dev->regmap, DCU_INT_STATUS, int_status); - regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE, - DCU_UPDATE_MODE_READREG); return IRQ_HANDLED; } From 93daeeca2c9472a47d419884a64f6ca2b7f006e4 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Mon, 5 Sep 2016 19:05:12 -0700 Subject: [PATCH 463/792] drm/fsl-dcu: update all registers on flush Use the UPDATE_MODE READREG bit to initiate a register transfer on flush. This makes sure that we flush all registers only once for all planes. Signed-off-by: Stefan Agner --- drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c | 5 +++++ drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.c | 5 ----- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c index b2d5e188b1b8..2ea9dbd9be30 100644 --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c @@ -25,8 +25,13 @@ static void fsl_dcu_drm_crtc_atomic_flush(struct drm_crtc *crtc, struct drm_crtc_state *old_crtc_state) { + struct drm_device *dev = crtc->dev; + struct fsl_dcu_drm_device *fsl_dev = dev->dev_private; struct drm_pending_vblank_event *event = crtc->state->event; + regmap_write(fsl_dev->regmap, + DCU_UPDATE_MODE, DCU_UPDATE_MODE_READREG); + if (event) { crtc->state->event = NULL; diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.c index 9e6f7d8112b3..a99f48847420 100644 --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.c +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.c @@ -160,11 +160,6 @@ static void fsl_dcu_drm_plane_atomic_update(struct drm_plane *plane, DCU_LAYER_POST_SKIP(0) | DCU_LAYER_PRE_SKIP(0)); } - regmap_update_bits(fsl_dev->regmap, DCU_DCU_MODE, - DCU_MODE_DCU_MODE_MASK, - DCU_MODE_DCU_MODE(DCU_MODE_NORMAL)); - regmap_write(fsl_dev->regmap, - DCU_UPDATE_MODE, DCU_UPDATE_MODE_READREG); return; } From 3d6f37102bd6e4b55a7f336d44974c0bd1c22a15 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Mon, 31 Oct 2016 09:51:19 -0700 Subject: [PATCH 464/792] drm/fsl-dcu: disable planes before disabling CRTC After disabling and reenabling the CRTC the DCU sometimes got stuck displaying the whole screen with a solid color. Disabling and reenabling the CRTC did not recover from the situation. This was often reproducable by just restarting the X-Server. The disabling sequence is not explicitly documented. But it turns out that disabling the planes before disabling the CRTC seems to prevent the above situation from happening. Use the callback ->atomic_disable instead of ->disable which allows to use the drm_atomic_helper_disable_planes_on_crtc() helper to disable planes before disabling the controller. Signed-off-by: Stefan Agner --- drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c index 2ea9dbd9be30..deb57435cc89 100644 --- a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c @@ -44,11 +44,15 @@ static void fsl_dcu_drm_crtc_atomic_flush(struct drm_crtc *crtc, } } -static void fsl_dcu_drm_disable_crtc(struct drm_crtc *crtc) +static void fsl_dcu_drm_crtc_atomic_disable(struct drm_crtc *crtc, + struct drm_crtc_state *old_crtc_state) { struct drm_device *dev = crtc->dev; struct fsl_dcu_drm_device *fsl_dev = dev->dev_private; + /* always disable planes on the CRTC */ + drm_atomic_helper_disable_planes_on_crtc(old_crtc_state, true); + drm_crtc_vblank_off(crtc); regmap_update_bits(fsl_dev->regmap, DCU_DCU_MODE, @@ -127,8 +131,8 @@ static void fsl_dcu_drm_crtc_mode_set_nofb(struct drm_crtc *crtc) } static const struct drm_crtc_helper_funcs fsl_dcu_drm_crtc_helper_funcs = { + .atomic_disable = fsl_dcu_drm_crtc_atomic_disable, .atomic_flush = fsl_dcu_drm_crtc_atomic_flush, - .disable = fsl_dcu_drm_disable_crtc, .enable = fsl_dcu_drm_crtc_enable, .mode_set_nofb = fsl_dcu_drm_crtc_mode_set_nofb, }; From 29f0c9edbdd98a977a4c629f411260f6e0356c67 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Tue, 8 Nov 2016 17:28:02 +0100 Subject: [PATCH 465/792] arm64: dts: marvell: Fix typo in label name on Armada 37xx The label names of the peripheral clocks have a typo. Fix it before it is more widely used. Reported-by: Thomas Petazzoni Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index c4762538ec01..e9bd58793464 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -105,7 +105,7 @@ status = "disabled"; }; - nb_perih_clk: nb-periph-clk@13000{ + nb_periph_clk: nb-periph-clk@13000 { compatible = "marvell,armada-3700-periph-clock-nb"; reg = <0x13000 0x100>; clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>, @@ -113,7 +113,7 @@ #clock-cells = <1>; }; - sb_perih_clk: sb-periph-clk@18000{ + sb_periph_clk: sb-periph-clk@18000 { compatible = "marvell,armada-3700-periph-clock-sb"; reg = <0x18000 0x100>; clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>, From 2ec27be33898effa47fcb2cd45abb552a97fac89 Mon Sep 17 00:00:00 2001 From: Marcin Wojtas Date: Tue, 6 Sep 2016 19:41:12 +0200 Subject: [PATCH 466/792] arm64: dts: marvell: fix clocksource for CP110 slave SPI0 I2C and SPI interfaces share common clock trees within the CP110 HW block. It occurred that SPI0 interface has wrong clock assignment in the device tree, which is fixed in this commit to a proper value. Fixes: c749b8d9de32 ("arm64: dts: marvell: add description for the ...") Signed-off-by: Marcin Wojtas Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi index 842fb333285c..565b3cb3d7ff 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi @@ -131,7 +131,7 @@ #address-cells = <0x1>; #size-cells = <0x0>; cell-index = <1>; - clocks = <&cps_syscon0 0 3>; + clocks = <&cps_syscon0 1 21>; status = "disabled"; }; From 8d897006fe9206d64cbe353310be26d7c911e69d Mon Sep 17 00:00:00 2001 From: Marcin Wojtas Date: Tue, 8 Nov 2016 17:31:32 +0100 Subject: [PATCH 467/792] arm64: dts: marvell: add unique identifiers for Armada A8k SPI controllers Enabling SPI controllers, which are attached to different busses inside an SoC, may result in overlapping enumeration and cause sysfs registration failure. Example log after enabling two controllers on Armada 8040 SoC with same identifiers: [ 3.740415] sysfs: cannot create duplicate filename '/class/spi_master/spi0' [ 3.747510] ------------[ cut here ]------------ [ 3.752145] WARNING: at fs/sysfs/dir.c:31 [...] [ 4.002299] orion_spi: probe of f4700600.spi failed with error -17 spi-orion driver offers dedicated DT property ('cell-index'), that allow setting unique identifiers. Recently added support for CP110-slave HW block introduced two new SPI controllers' nodes with same ID as ones from CP110-master. This commit fixes the issue by assigning different 'cell-index' values for CP110-slave SPI controllers. Fixes: 4eef78a0091b ("arm64: dts: marvell: add description for the slave CP110 in Armada 8K") Signed-off-by: Marcin Wojtas Acked-by: Thomas Petazzoni Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi index 565b3cb3d7ff..6bf9e241179b 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi @@ -130,7 +130,7 @@ reg = <0x700600 0x50>; #address-cells = <0x1>; #size-cells = <0x0>; - cell-index = <1>; + cell-index = <3>; clocks = <&cps_syscon0 1 21>; status = "disabled"; }; @@ -140,7 +140,7 @@ reg = <0x700680 0x50>; #address-cells = <1>; #size-cells = <0>; - cell-index = <2>; + cell-index = <4>; clocks = <&cps_syscon0 1 21>; status = "disabled"; }; From 5ced937b7d8dae2c6a536112abaad6352769a931 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Tue, 8 Nov 2016 17:04:10 +0100 Subject: [PATCH 468/792] drm/imx: disable planes before DC If the DC clock is disabled before the attached IDMACs are properly stopped the IDMACs may hang the IPU or even the whole system. Make sure the IDMACs are in safe state by disabling the planes before removal of the DC clock. Also set the atomic parameter to false to stop calling the atomic_begin hook, which does nothing useful as we immediately afterwards turn off vblank interrupts and possibly send the pending vblank event. Fixes: 33f14235302f (drm/imx: atomic phase 1: Use transitional atomic CRTC and plane helpers) Signed-off-by: Lucas Stach Signed-off-by: Philipp Zabel --- drivers/gpu/drm/imx/ipuv3-crtc.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/imx/ipuv3-crtc.c b/drivers/gpu/drm/imx/ipuv3-crtc.c index 4e1ae3fc462d..6be515a9fb69 100644 --- a/drivers/gpu/drm/imx/ipuv3-crtc.c +++ b/drivers/gpu/drm/imx/ipuv3-crtc.c @@ -68,6 +68,12 @@ static void ipu_crtc_atomic_disable(struct drm_crtc *crtc, ipu_dc_disable_channel(ipu_crtc->dc); ipu_di_disable(ipu_crtc->di); + /* + * Planes must be disabled before DC clock is removed, as otherwise the + * attached IDMACs will be left in undefined state, possibly hanging + * the IPU or even system. + */ + drm_atomic_helper_disable_planes_on_crtc(old_crtc_state, false); ipu_dc_disable(ipu); spin_lock_irq(&crtc->dev->event_lock); @@ -77,9 +83,6 @@ static void ipu_crtc_atomic_disable(struct drm_crtc *crtc, } spin_unlock_irq(&crtc->dev->event_lock); - /* always disable planes on the CRTC */ - drm_atomic_helper_disable_planes_on_crtc(old_crtc_state, true); - drm_crtc_vblank_off(crtc); } From 9cba9844547731d2f14d79485c43192ffaa37b76 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Tue, 25 Oct 2016 01:21:10 +0900 Subject: [PATCH 469/792] perf hist browser: Fix hierarchy column counts The perf report/top on TUI supports horizontal scrolling using LEFT and RIGHT keys. But it calculate the number of columns incorrectly when hierarchy mode is enabled so that keep pressing RIGHT key can make the output disappeared. In the hierarchy mode, all sort keys are collapsed into a single column, so it needs to be applied when calculating column numbers. Reported-and-Tested-by: Markus Trippelsdorf Signed-off-by: Namhyung Kim Tested-by: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20161024162110.17918-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/ui/browsers/hists.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/tools/perf/ui/browsers/hists.c b/tools/perf/ui/browsers/hists.c index 4ffff7be9299..5adedc1a09d3 100644 --- a/tools/perf/ui/browsers/hists.c +++ b/tools/perf/ui/browsers/hists.c @@ -2076,8 +2076,21 @@ void hist_browser__init(struct hist_browser *browser, browser->b.use_navkeypressed = true; browser->show_headers = symbol_conf.show_hist_headers; - hists__for_each_format(hists, fmt) + if (symbol_conf.report_hierarchy) { + struct perf_hpp_list_node *fmt_node; + + /* count overhead columns (in the first node) */ + fmt_node = list_first_entry(&hists->hpp_formats, + struct perf_hpp_list_node, list); + perf_hpp_list__for_each_format(&fmt_node->hpp, fmt) + ++browser->b.columns; + + /* add a single column for whole hierarchy sort keys*/ ++browser->b.columns; + } else { + hists__for_each_format(hists, fmt) + ++browser->b.columns; + } hists__reset_column_width(hists); } From 3d9f4683929a968dc9b9493f4e608b109ad292a2 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Tue, 8 Nov 2016 22:08:30 +0900 Subject: [PATCH 470/792] perf hists browser: Fix indentation of folded sign on --hierarchy It should indent 2 spaces for folded sign and a whitespace. Signed-off-by: Namhyung Kim Tested-by: Markus Trippelsdorf Cc: Jiri Olsa Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20161108130833.9263-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/ui/browsers/hists.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/tools/perf/ui/browsers/hists.c b/tools/perf/ui/browsers/hists.c index 5adedc1a09d3..225ef2a15a13 100644 --- a/tools/perf/ui/browsers/hists.c +++ b/tools/perf/ui/browsers/hists.c @@ -1337,8 +1337,8 @@ static int hist_browser__show_hierarchy_entry(struct hist_browser *browser, } if (first) { - ui_browser__printf(&browser->b, "%c", folded_sign); - width--; + ui_browser__printf(&browser->b, "%c ", folded_sign); + width -= 2; first = false; } else { ui_browser__printf(&browser->b, " "); @@ -1555,7 +1555,7 @@ static int hists_browser__scnprintf_hierarchy_headers(struct hist_browser *brows int indent = hists->nr_hpp_node - 2; bool first_node, first_col; - ret = scnprintf(buf, size, " "); + ret = scnprintf(buf, size, " "); if (advance_hpp_check(&dummy_hpp, ret)) return ret; From 131d51eb1d17aac3a604cf929fd99ff4dd34f495 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Tue, 8 Nov 2016 22:08:31 +0900 Subject: [PATCH 471/792] perf hists browser: Show folded sign properly on --hierarchy When horizontal scrolling is used in hierarchy mode, the folded signed disappears at the right most column. Committer note: To test it, run 'perf top --hierarchy, see the '+' symbol at the first column, then press the right arrow key, the '+' symbol will disappear, this patch fixes that. Signed-off-by: Namhyung Kim Tested-by: Arnaldo Carvalho de Melo Tested-by: Markus Trippelsdorf Cc: Jiri Olsa Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20161108130833.9263-3-namhyung@kernel.org [ Move 'width -= 2' invariant to right after the if/else ] Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/ui/browsers/hists.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/tools/perf/ui/browsers/hists.c b/tools/perf/ui/browsers/hists.c index 225ef2a15a13..e767fbd17ad2 100644 --- a/tools/perf/ui/browsers/hists.c +++ b/tools/perf/ui/browsers/hists.c @@ -1381,7 +1381,13 @@ static int hist_browser__show_hierarchy_entry(struct hist_browser *browser, } perf_hpp_list__for_each_format(entry->hpp_list, fmt) { - ui_browser__write_nstring(&browser->b, "", 2); + if (first) { + ui_browser__printf(&browser->b, "%c ", folded_sign); + first = false; + } else { + ui_browser__write_nstring(&browser->b, "", 2); + } + width -= 2; /* From b9bf911e990a189f89147ee6b66660a153ed0125 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Tue, 8 Nov 2016 22:08:32 +0900 Subject: [PATCH 472/792] perf hists browser: Fix column indentation on --hierarchy When horizontall scrolling is used in hierarchy mode, the the right most column has unnecessary indentation. Actually it's needed only if some of left (overhead) columns were shown. Signed-off-by: Namhyung Kim Tested-by: Arnaldo Carvalho de Melo Tested-by: Markus Trippelsdorf Cc: Jiri Olsa Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20161108130833.9263-4-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/ui/browsers/hists.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/tools/perf/ui/browsers/hists.c b/tools/perf/ui/browsers/hists.c index e767fbd17ad2..a53fef0c673b 100644 --- a/tools/perf/ui/browsers/hists.c +++ b/tools/perf/ui/browsers/hists.c @@ -1361,8 +1361,10 @@ static int hist_browser__show_hierarchy_entry(struct hist_browser *browser, width -= hpp.buf - s; } - ui_browser__write_nstring(&browser->b, "", hierarchy_indent); - width -= hierarchy_indent; + if (!first) { + ui_browser__write_nstring(&browser->b, "", hierarchy_indent); + width -= hierarchy_indent; + } if (column >= browser->b.horiz_scroll) { char s[2048]; @@ -1565,6 +1567,7 @@ static int hists_browser__scnprintf_hierarchy_headers(struct hist_browser *brows if (advance_hpp_check(&dummy_hpp, ret)) return ret; + first_node = true; /* the first hpp_list_node is for overhead columns */ fmt_node = list_first_entry(&hists->hpp_formats, struct perf_hpp_list_node, list); @@ -1579,12 +1582,16 @@ static int hists_browser__scnprintf_hierarchy_headers(struct hist_browser *brows ret = scnprintf(dummy_hpp.buf, dummy_hpp.size, " "); if (advance_hpp_check(&dummy_hpp, ret)) break; + + first_node = false; } - ret = scnprintf(dummy_hpp.buf, dummy_hpp.size, "%*s", - indent * HIERARCHY_INDENT, ""); - if (advance_hpp_check(&dummy_hpp, ret)) - return ret; + if (!first_node) { + ret = scnprintf(dummy_hpp.buf, dummy_hpp.size, "%*s", + indent * HIERARCHY_INDENT, ""); + if (advance_hpp_check(&dummy_hpp, ret)) + return ret; + } first_node = true; list_for_each_entry_continue(fmt_node, &hists->hpp_formats, list) { From c72ab446cac1d6c9551fd26c4cfef1b2fc5041fd Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Tue, 8 Nov 2016 22:08:33 +0900 Subject: [PATCH 473/792] perf hists: Fix column length on --hierarchy Markus reported that there's a weird behavior on perf top --hierarchy regarding the column length. Looking at the code, I found a dubious code which affects the symptoms. When --hierarchy option is used, the last column length might be inaccurate since it skips to update the length on leaf entries. I cannot remember why it did and looks like a leftover from previous version during the development. Anyway, updating the column length often is not harmful. So let's move the code out. Reported-and-Tested-by: Markus Trippelsdorf Signed-off-by: Namhyung Kim Cc: Jiri Olsa Cc: Peter Zijlstra Fixes: 1a3906a7e6b9 ("perf hists: Resort hist entries with hierarchy") Link: http://lkml.kernel.org/r/20161108130833.9263-5-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/hist.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/tools/perf/util/hist.c b/tools/perf/util/hist.c index b02992efb513..a69f027368ef 100644 --- a/tools/perf/util/hist.c +++ b/tools/perf/util/hist.c @@ -1600,18 +1600,18 @@ static void hists__hierarchy_output_resort(struct hists *hists, if (prog) ui_progress__update(prog, 1); + hists->nr_entries++; + if (!he->filtered) { + hists->nr_non_filtered_entries++; + hists__calc_col_len(hists, he); + } + if (!he->leaf) { hists__hierarchy_output_resort(hists, prog, &he->hroot_in, &he->hroot_out, min_callchain_hits, use_callchain); - hists->nr_entries++; - if (!he->filtered) { - hists->nr_non_filtered_entries++; - hists__calc_col_len(hists, he); - } - continue; } From b0b6e86846093c5f8820386bc01515f857dd8faa Mon Sep 17 00:00:00 2001 From: Yazen Ghannam Date: Tue, 8 Nov 2016 09:35:06 +0100 Subject: [PATCH 474/792] x86/cpu/AMD: Fix cpu_llc_id for AMD Fam17h systems cpu_llc_id (Last Level Cache ID) derivation on AMD Fam17h has an underflow bug when extracting the socket_id value. It starts from 0 so subtracting 1 from it will result in an invalid value. This breaks scheduling topology later on since the cpu_llc_id will be incorrect. For example, the the cpu_llc_id of the *other* CPU in the loops in set_cpu_sibling_map() underflows and we're generating the funniest thread_siblings masks and then when I run 8 threads of nbench, they get spread around the LLC domains in a very strange pattern which doesn't give you the normal scheduling spread one would expect for performance. Other things like EDAC use cpu_llc_id so they will be b0rked too. So, the APIC ID is preset in APICx020 for bits 3 and above: they contain the core complex, node and socket IDs. The LLC is at the core complex level so we can find a unique cpu_llc_id by right shifting the APICID by 3 because then the least significant bit will be the Core Complex ID. Tested-by: Borislav Petkov Signed-off-by: Yazen Ghannam [ Cleaned up and extended the commit message. ] Signed-off-by: Borislav Petkov Acked-by: Thomas Gleixner Cc: # v4.4.. Cc: Aravind Gopalakrishnan Cc: Linus Torvalds Cc: Peter Zijlstra Fixes: 3849e91f571d ("x86/AMD: Fix last level cache topology for AMD Fam17h systems") Link: http://lkml.kernel.org/r/20161108083506.rvqb5h4chrcptj7d@pd.tnic Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/amd.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index b81fe2d63e15..1e81a37c034e 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -347,7 +347,6 @@ static void amd_detect_cmp(struct cpuinfo_x86 *c) #ifdef CONFIG_SMP unsigned bits; int cpu = smp_processor_id(); - unsigned int socket_id, core_complex_id; bits = c->x86_coreid_bits; /* Low order bits define the core id (index of core in socket) */ @@ -365,10 +364,7 @@ static void amd_detect_cmp(struct cpuinfo_x86 *c) if (c->x86 != 0x17 || !cpuid_edx(0x80000006)) return; - socket_id = (c->apicid >> bits) - 1; - core_complex_id = (c->apicid & ((1 << bits) - 1)) >> 3; - - per_cpu(cpu_llc_id, cpu) = (socket_id << 3) | core_complex_id; + per_cpu(cpu_llc_id, cpu) = c->apicid >> 3; #endif } From 5e5ec1759dd663a1d5a2f10930224dd009e500e8 Mon Sep 17 00:00:00 2001 From: Sumit Saxena Date: Wed, 9 Nov 2016 02:59:42 -0800 Subject: [PATCH 475/792] scsi: megaraid_sas: fix macro MEGASAS_IS_LOGICAL to avoid regression This patch will fix regression caused by commit 1e793f6fc0db ("scsi: megaraid_sas: Fix data integrity failure for JBOD (passthrough) devices"). The problem was that the MEGASAS_IS_LOGICAL macro did not have braces and as a result the driver ended up exposing a lot of non-existing SCSI devices (all SCSI commands to channels 1,2,3 were returned as SUCCESS-DID_OK by driver). [mkp: clarified patch description] Fixes: 1e793f6fc0db920400574211c48f9157a37e3945 Reported-by: Jens Axboe CC: stable@vger.kernel.org Signed-off-by: Kashyap Desai Signed-off-by: Sumit Saxena Tested-by: Sumit Saxena Reviewed-by: Tomas Henzl Tested-by: Jens Axboe Signed-off-by: Martin K. Petersen --- drivers/scsi/megaraid/megaraid_sas.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h index ca86c885dfaa..3aaea713bf37 100644 --- a/drivers/scsi/megaraid/megaraid_sas.h +++ b/drivers/scsi/megaraid/megaraid_sas.h @@ -2233,7 +2233,7 @@ struct megasas_instance_template { }; #define MEGASAS_IS_LOGICAL(scp) \ - (scp->device->channel < MEGASAS_MAX_PD_CHANNELS) ? 0 : 1 + ((scp->device->channel < MEGASAS_MAX_PD_CHANNELS) ? 0 : 1) #define MEGASAS_DEV_INDEX(scp) \ (((scp->device->channel % 2) * MEGASAS_MAX_DEV_PER_CHANNEL) + \ From aa5fd0fb77486b8a6764ead8627baa14790e4280 Mon Sep 17 00:00:00 2001 From: Gao Feng Date: Fri, 4 Nov 2016 10:28:49 +0800 Subject: [PATCH 476/792] driver: macvlan: Destroy new macvlan port if macvlan_common_newlink failed. When there is no existing macvlan port in lowdev, one new macvlan port would be created. But it doesn't be destoried when something failed later. It casues some memleak. Now add one flag to indicate if new macvlan port is created. Signed-off-by: Gao Feng Signed-off-by: David S. Miller --- drivers/net/macvlan.c | 31 ++++++++++++++++++++++--------- 1 file changed, 22 insertions(+), 9 deletions(-) diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c index 3234fcdea317..d2d6f12a112f 100644 --- a/drivers/net/macvlan.c +++ b/drivers/net/macvlan.c @@ -1278,6 +1278,7 @@ int macvlan_common_newlink(struct net *src_net, struct net_device *dev, struct net_device *lowerdev; int err; int macmode; + bool create = false; if (!tb[IFLA_LINK]) return -EINVAL; @@ -1304,12 +1305,18 @@ int macvlan_common_newlink(struct net *src_net, struct net_device *dev, err = macvlan_port_create(lowerdev); if (err < 0) return err; + create = true; } port = macvlan_port_get_rtnl(lowerdev); /* Only 1 macvlan device can be created in passthru mode */ - if (port->passthru) - return -EINVAL; + if (port->passthru) { + /* The macvlan port must be not created this time, + * still goto destroy_macvlan_port for readability. + */ + err = -EINVAL; + goto destroy_macvlan_port; + } vlan->lowerdev = lowerdev; vlan->dev = dev; @@ -1325,24 +1332,28 @@ int macvlan_common_newlink(struct net *src_net, struct net_device *dev, vlan->flags = nla_get_u16(data[IFLA_MACVLAN_FLAGS]); if (vlan->mode == MACVLAN_MODE_PASSTHRU) { - if (port->count) - return -EINVAL; + if (port->count) { + err = -EINVAL; + goto destroy_macvlan_port; + } port->passthru = true; eth_hw_addr_inherit(dev, lowerdev); } if (data && data[IFLA_MACVLAN_MACADDR_MODE]) { - if (vlan->mode != MACVLAN_MODE_SOURCE) - return -EINVAL; + if (vlan->mode != MACVLAN_MODE_SOURCE) { + err = -EINVAL; + goto destroy_macvlan_port; + } macmode = nla_get_u32(data[IFLA_MACVLAN_MACADDR_MODE]); err = macvlan_changelink_sources(vlan, macmode, data); if (err) - return err; + goto destroy_macvlan_port; } err = register_netdevice(dev); if (err < 0) - return err; + goto destroy_macvlan_port; dev->priv_flags |= IFF_MACVLAN; err = netdev_upper_dev_link(lowerdev, dev); @@ -1357,7 +1368,9 @@ int macvlan_common_newlink(struct net *src_net, struct net_device *dev, unregister_netdev: unregister_netdevice(dev); - +destroy_macvlan_port: + if (create) + macvlan_port_destroy(port->dev); return err; } EXPORT_SYMBOL_GPL(macvlan_common_newlink); From 3023898b7d4aac65987bd2f485cc22390aae6f78 Mon Sep 17 00:00:00 2001 From: Soheil Hassas Yeganeh Date: Fri, 4 Nov 2016 15:36:49 -0400 Subject: [PATCH 477/792] sock: fix sendmmsg for partial sendmsg MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Do not send the next message in sendmmsg for partial sendmsg invocations. sendmmsg assumes that it can continue sending the next message when the return value of the individual sendmsg invocations is positive. It results in corrupting the data for TCP, SCTP, and UNIX streams. For example, sendmmsg([["abcd"], ["efgh"]]) can result in a stream of "aefgh" if the first sendmsg invocation sends only the first byte while the second sendmsg goes through. Datagram sockets either send the entire datagram or fail, so this patch affects only sockets of type SOCK_STREAM and SOCK_SEQPACKET. Fixes: 228e548e6020 ("net: Add sendmmsg socket system call") Signed-off-by: Soheil Hassas Yeganeh Signed-off-by: Eric Dumazet Signed-off-by: Willem de Bruijn Signed-off-by: Neal Cardwell Acked-by: Maciej Żenczykowski Signed-off-by: David S. Miller --- net/socket.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/socket.c b/net/socket.c index 5a9bf5ee2464..272518b087c8 100644 --- a/net/socket.c +++ b/net/socket.c @@ -2038,6 +2038,8 @@ int __sys_sendmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen, if (err) break; ++datagrams; + if (msg_data_left(&msg_sys)) + break; cond_resched(); } From fb56be83e43d0bb0cc9e8c35a6a9cac853231ba2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Maciej=20=C5=BBenczykowski?= Date: Fri, 4 Nov 2016 14:51:54 -0700 Subject: [PATCH 478/792] net-ipv6: on device mtu change do not add mtu to mtu-less routes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Routes can specify an mtu explicitly or inherit the mtu from the underlying device - this inheritance is implemented in dst->ops->mtu handlers ip6_mtu() and ip6_blackhole_mtu(). Currently changing the mtu of a device adds mtu explicitly to routes using that device. ie. # ip link set dev lo mtu 65536 # ip -6 route add local 2000::1 dev lo # ip -6 route get 2000::1 local 2000::1 dev lo table local src ... metric 1024 pref medium # ip link set dev lo mtu 65535 # ip -6 route get 2000::1 local 2000::1 dev lo table local src ... metric 1024 mtu 65535 pref medium # ip link set dev lo mtu 65536 # ip -6 route get 2000::1 local 2000::1 dev lo table local src ... metric 1024 mtu 65536 pref medium # ip -6 route del local 2000::1 After this patch the route entry no longer changes unless it already has an mtu. There is no need: this inheritance is already done in ip6_mtu() # ip link set dev lo mtu 65536 # ip -6 route add local 2000::1 dev lo # ip -6 route add local 2000::2 dev lo mtu 2000 # ip -6 route get 2000::1; ip -6 route get 2000::2 local 2000::1 dev lo table local src ... metric 1024 pref medium local 2000::2 dev lo table local src ... metric 1024 mtu 2000 pref medium # ip link set dev lo mtu 65535 # ip -6 route get 2000::1; ip -6 route get 2000::2 local 2000::1 dev lo table local src ... metric 1024 pref medium local 2000::2 dev lo table local src ... metric 1024 mtu 2000 pref medium # ip link set dev lo mtu 1501 # ip -6 route get 2000::1; ip -6 route get 2000::2 local 2000::1 dev lo table local src ... metric 1024 pref medium local 2000::2 dev lo table local src ... metric 1024 mtu 1501 pref medium # ip link set dev lo mtu 65536 # ip -6 route get 2000::1; ip -6 route get 2000::2 local 2000::1 dev lo table local src ... metric 1024 pref medium local 2000::2 dev lo table local src ... metric 1024 mtu 65536 pref medium # ip -6 route del local 2000::1 # ip -6 route del local 2000::2 This is desirable because changing device mtu and then resetting it to the previous value shouldn't change the user visible routing table. Signed-off-by: Maciej Żenczykowski CC: Eric Dumazet Acked-by: Hannes Frederic Sowa Signed-off-by: David S. Miller --- net/ipv6/route.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 7403d90dcb38..1b57e11e6e0d 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -2761,6 +2761,7 @@ static int rt6_mtu_change_route(struct rt6_info *rt, void *p_arg) PMTU discouvery. */ if (rt->dst.dev == arg->dev && + dst_metric_raw(&rt->dst, RTAX_MTU) && !dst_metric_locked(&rt->dst, RTAX_MTU)) { if (rt->rt6i_flags & RTF_CACHE) { /* For RTF_CACHE with rt6i_pmtu == 0 From f91d718156fe93d0cf684cacf5f247c35a825d79 Mon Sep 17 00:00:00 2001 From: Tariq Toukan Date: Sun, 6 Nov 2016 18:05:06 +0200 Subject: [PATCH 479/792] Revert "net/mlx4_en: Fix panic during reboot" This reverts commit 9d2afba058722d40cc02f430229c91611c0e8d16. The original issue would possibly exist if an external module tried calling our "ethtool_ops" without checking if it still exists. The right way of solving it is by simply doing the check in the caller side. Currently, no action is required as there's no such use case. Signed-off-by: Tariq Toukan Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c index 12c99a2655f2..3a47e83d3e07 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c @@ -2202,7 +2202,6 @@ void mlx4_en_destroy_netdev(struct net_device *dev) if (!shutdown) free_netdev(dev); - dev->ethtool_ops = NULL; } static int mlx4_en_change_mtu(struct net_device *dev, int new_mtu) From d667f78514c656a6a8bf0b3d6134a7fe5cd4d317 Mon Sep 17 00:00:00 2001 From: Benjamin Poirier Date: Mon, 7 Nov 2016 17:57:56 +0800 Subject: [PATCH 480/792] bna: Add synchronization for tx ring. We received two reports of BUG_ON in bnad_txcmpl_process() where hw_consumer_index appeared to be ahead of producer_index. Out of order write/read of these variables could explain these reports. bnad_start_xmit(), as a producer of tx descriptors, has a few memory barriers sprinkled around writes to producer_index and the device's doorbell but they're not paired with anything in bnad_txcmpl_process(), a consumer. Since we are synchronizing with a device, we must use mandatory barriers, not smp_*. Also, I didn't see the purpose of the last smp_mb() in bnad_start_xmit(). Signed-off-by: Benjamin Poirier Signed-off-by: David S. Miller --- drivers/net/ethernet/brocade/bna/bnad.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/brocade/bna/bnad.c b/drivers/net/ethernet/brocade/bna/bnad.c index f9df4b5ae90e..f42f672b0e7e 100644 --- a/drivers/net/ethernet/brocade/bna/bnad.c +++ b/drivers/net/ethernet/brocade/bna/bnad.c @@ -177,6 +177,7 @@ bnad_txcmpl_process(struct bnad *bnad, struct bna_tcb *tcb) return 0; hw_cons = *(tcb->hw_consumer_index); + rmb(); cons = tcb->consumer_index; q_depth = tcb->q_depth; @@ -3094,7 +3095,7 @@ bnad_start_xmit(struct sk_buff *skb, struct net_device *netdev) BNA_QE_INDX_INC(prod, q_depth); tcb->producer_index = prod; - smp_mb(); + wmb(); if (unlikely(!test_bit(BNAD_TXQ_TX_STARTED, &tcb->flags))) return NETDEV_TX_OK; @@ -3102,7 +3103,6 @@ bnad_start_xmit(struct sk_buff *skb, struct net_device *netdev) skb_tx_timestamp(skb); bna_txq_prod_indx_doorbell(tcb); - smp_mb(); return NETDEV_TX_OK; } From cdb26d3387f0cdf7b2a2eea581385173547ef21f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Mon, 7 Nov 2016 13:53:27 +0100 Subject: [PATCH 481/792] net: bgmac: fix reversed checks for clock control flag MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This fixes regression introduced by patch adding feature flags. It was already reported and patch followed (it got accepted) but it appears it was incorrect. Instead of fixing reversed condition it broke a good one. This patch was verified to actually fix SoC hanges caused by bgmac on BCM47186B0. Fixes: db791eb2970b ("net: ethernet: bgmac: convert to feature flags") Fixes: 4af1474e6198 ("net: bgmac: Fix errant feature flag check") Cc: Jon Mason Signed-off-by: Rafał Miłecki Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bgmac.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c index 91cbf92de971..49f4cafe5438 100644 --- a/drivers/net/ethernet/broadcom/bgmac.c +++ b/drivers/net/ethernet/broadcom/bgmac.c @@ -1049,9 +1049,9 @@ static void bgmac_enable(struct bgmac *bgmac) mode = (bgmac_read(bgmac, BGMAC_DEV_STATUS) & BGMAC_DS_MM_MASK) >> BGMAC_DS_MM_SHIFT; - if (!(bgmac->feature_flags & BGMAC_FEAT_CLKCTLST) || mode != 0) + if (bgmac->feature_flags & BGMAC_FEAT_CLKCTLST || mode != 0) bgmac_set(bgmac, BCMA_CLKCTLST, BCMA_CLKCTLST_FORCEHT); - if (bgmac->feature_flags & BGMAC_FEAT_CLKCTLST && mode == 2) + if (!(bgmac->feature_flags & BGMAC_FEAT_CLKCTLST) && mode == 2) bgmac_cco_ctl_maskset(bgmac, 1, ~0, BGMAC_CHIPCTL_1_RXC_DLL_BYPASS); From d49597fd3bc7d9534de55e9256767f073be1b33a Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 9 Nov 2016 16:35:51 +0100 Subject: [PATCH 482/792] x86/cpu: Deal with broken firmware (VMWare/XEN) Both ACPI and MP specifications require that the APIC id in the respective tables must be the same as the APIC id in CPUID. The kernel retrieves the physical package id from the APIC id during the ACPI/MP table scan and builds the physical to logical package map. The physical package id which is used after a CPU comes up is retrieved from CPUID. So we rely on ACPI/MP tables and CPUID agreeing in that respect. There exist VMware and XEN implementations which violate the spec. As a result the physical to logical package map, which relies on the ACPI/MP tables does not work on those systems, because the CPUID initialized physical package id does not match the firmware id. This causes system crashes and malfunction due to invalid package mappings. The only way to cure this is to sanitize the physical package id after the CPUID enumeration and yell when the APIC ids are different. Fix up the initial APIC id, which is fine as it is only used printout purposes. If the physical package IDs differ yell and use the package information from the ACPI/MP tables so the existing logical package map just works. Chas provided the resulting dmesg output for his affected 4 virtual sockets, 1 core per socket VM: [Firmware Bug]: CPU1: APIC id mismatch. Firmware: 1 CPUID: 2 [Firmware Bug]: CPU1: Using firmware package id 1 instead of 2 .... Reported-and-tested-by: "Charles (Chas) Williams" , Reported-by: M. Vefa Bicakci Signed-off-by: Thomas Gleixner Cc: Peter Zijlstra Cc: Sebastian Andrzej Siewior Cc: Borislav Petkov Cc: Alok Kataria Cc: Boris Ostrovsky Cc: #4.6+ Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1611091613540.3501@nanos Signed-off-by: Thomas Gleixner --- arch/x86/kernel/cpu/common.c | 32 ++++++++++++++++++++++++++++++-- 1 file changed, 30 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 9bd910a7dd0a..cc9e980c68ec 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -978,6 +978,35 @@ static void x86_init_cache_qos(struct cpuinfo_x86 *c) } } +/* + * The physical to logical package id mapping is initialized from the + * acpi/mptables information. Make sure that CPUID actually agrees with + * that. + */ +static void sanitize_package_id(struct cpuinfo_x86 *c) +{ +#ifdef CONFIG_SMP + unsigned int pkg, apicid, cpu = smp_processor_id(); + + apicid = apic->cpu_present_to_apicid(cpu); + pkg = apicid >> boot_cpu_data.x86_coreid_bits; + + if (apicid != c->initial_apicid) { + pr_err(FW_BUG "CPU%u: APIC id mismatch. Firmware: %x CPUID: %x\n", + cpu, apicid, c->initial_apicid); + c->initial_apicid = apicid; + } + if (pkg != c->phys_proc_id) { + pr_err(FW_BUG "CPU%u: Using firmware package id %u instead of %u\n", + cpu, pkg, c->phys_proc_id); + c->phys_proc_id = pkg; + } + c->logical_proc_id = topology_phys_to_logical_pkg(pkg); +#else + c->logical_proc_id = 0; +#endif +} + /* * This does the hard work of actually picking apart the CPU stuff... */ @@ -1103,8 +1132,7 @@ static void identify_cpu(struct cpuinfo_x86 *c) #ifdef CONFIG_NUMA numa_add_cpu(smp_processor_id()); #endif - /* The boot/hotplug time assigment got cleared, restore it */ - c->logical_proc_id = topology_phys_to_logical_pkg(c->phys_proc_id); + sanitize_package_id(c); } /* From 82031ea29e454b574bc6f49a33683a693ca5d907 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Fri, 4 Nov 2016 19:39:39 +0100 Subject: [PATCH 483/792] scripts/has-stack-protector: add -fno-PIE Adding -no-PIE to the fstack protector check. -no-PIE was introduced before -fstack-protector so there is no need for a runtime check. Without it the build stops: |Cannot use CONFIG_CC_STACKPROTECTOR_STRONG: -fstack-protector-strong available but compiler is broken due to -mcmodel=kernel + -fPIE if -fPIE is enabled by default. Tagging it stable so it is possible to compile recent stable kernels as well. Cc: stable@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Michal Marek --- scripts/gcc-x86_64-has-stack-protector.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/gcc-x86_64-has-stack-protector.sh b/scripts/gcc-x86_64-has-stack-protector.sh index 973e8c141567..17867e723a51 100755 --- a/scripts/gcc-x86_64-has-stack-protector.sh +++ b/scripts/gcc-x86_64-has-stack-protector.sh @@ -1,6 +1,6 @@ #!/bin/sh -echo "int foo(void) { char X[200]; return 3; }" | $* -S -x c -c -O0 -mcmodel=kernel -fstack-protector - -o - 2> /dev/null | grep -q "%gs" +echo "int foo(void) { char X[200]; return 3; }" | $* -S -x c -c -O0 -mcmodel=kernel -fno-PIE -fstack-protector - -o - 2> /dev/null | grep -q "%gs" if [ "$?" -eq "0" ] ; then echo y else From 90944e40ba1838de4b2a9290cf273f9d76bd3bdd Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Fri, 4 Nov 2016 19:39:40 +0100 Subject: [PATCH 484/792] x86/kexec: add -fno-PIE If the gcc is configured to do -fPIE by default then the build aborts later with: | Unsupported relocation type: unknown type rel type name (29) Tagging it stable so it is possible to compile recent stable kernels as well. Cc: stable@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Michal Marek --- arch/x86/purgatory/Makefile | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/purgatory/Makefile b/arch/x86/purgatory/Makefile index ac58c1616408..555b9fa0ad43 100644 --- a/arch/x86/purgatory/Makefile +++ b/arch/x86/purgatory/Makefile @@ -16,6 +16,7 @@ KCOV_INSTRUMENT := n KBUILD_CFLAGS := -fno-strict-aliasing -Wall -Wstrict-prototypes -fno-zero-initialized-in-bss -fno-builtin -ffreestanding -c -MD -Os -mcmodel=large KBUILD_CFLAGS += -m$(BITS) +KBUILD_CFLAGS += $(call cc-option,-fno-PIE) $(obj)/purgatory.ro: $(PURGATORY_OBJS) FORCE $(call if_changed,ld) From cc6acc11cad1eb1ae39707a3a6e4a97fafbeeabd Mon Sep 17 00:00:00 2001 From: Nicholas Piggin Date: Wed, 9 Nov 2016 15:34:05 +1100 Subject: [PATCH 485/792] kbuild: be more careful about matching preprocessed asm ___EXPORT_SYMBOL MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The CRC code for asm exports grabs the preprocessed asm, finds the ___EXPORT_SYMBOL and turns those into EXPORT_SYMBOL in a C program that can be preprocessed and parsed to create the CRC signatures from the type. The existing regex matching and replacement is too strict, and doesn't deal well with whitespace among other things. The line " EXPORT_SYMBOL(sym)" in a .S file would not match due to initial whitespace, for example, which resulted in x86's ___preempt_schedule failing to get CRCs. Reported-by: Philip Müller Signed-off-by: Nicholas Piggin Signed-off-by: Michal Marek --- scripts/Makefile.build | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/scripts/Makefile.build b/scripts/Makefile.build index 3e223c264469..7675d11ee65e 100644 --- a/scripts/Makefile.build +++ b/scripts/Makefile.build @@ -332,8 +332,8 @@ cmd_gensymtypes_S = \ (echo "\#include " ; \ echo "\#include " ; \ $(CPP) $(a_flags) $< | \ - grep ^___EXPORT_SYMBOL | \ - sed 's/___EXPORT_SYMBOL \([a-zA-Z0-9_]*\),.*/EXPORT_SYMBOL(\1);/' ) | \ + grep "\<___EXPORT_SYMBOL\>" | \ + sed 's/.*___EXPORT_SYMBOL[[:space:]]*\([a-zA-Z0-9_]*\)[[:space:]]*,.*/EXPORT_SYMBOL(\1);/' ) | \ $(CPP) -D__GENKSYMS__ $(c_flags) -xc - | \ $(GENKSYMS) $(if $(1), -T $(2)) \ $(patsubst y,-s _,$(CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX)) \ From 80513a2b9f0448eadd10ae81a42229b33ef451fb Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Fri, 21 Oct 2016 08:34:59 -0500 Subject: [PATCH 486/792] ARM: omap3: Add missing memory node in SOM-LV The skeleton.dtsi file was removed in ARM64 for different reasons as explained in commit ("3ebee5a2e141 arm64: dts: kill skeleton.dtsi"). commit ("766a1fe78fc3 ARM: omap3: Add missing memory node") had fixes for Torpedo and Overo boards, but this SOM-LV was missed. This should help prevent the DTC warning: "Node /memory has a reg or ranges property, but no unit name" Signed-off-by: Adam Ford Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/logicpd-som-lv.dtsi | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi index 0ff1c2de95bf..26cce4d18405 100644 --- a/arch/arm/boot/dts/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -13,6 +13,11 @@ }; }; + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0>; + }; + wl12xx_vmmc: wl12xx_vmmc { compatible = "regulator-fixed"; regulator-name = "vwl1271"; From 1571875beecd5de9657f73931449bda1b1329b6f Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Thu, 3 Nov 2016 16:21:26 +0200 Subject: [PATCH 487/792] ACPI / platform: Add support for build-in properties MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We have a couple of drivers, acpi_apd.c and acpi_lpss.c, that need to pass extra build-in properties to the devices they create. Previously the drivers added those properties to the struct device which is member of the struct acpi_device, but that does not work. Those properties need to be assigned to the struct device of the platform device instead in order for them to become available to the drivers. To fix this, this patch changes acpi_create_platform_device function to take struct property_entry pointer as parameter. Fixes: 20a875e2e86e (serial: 8250_dw: Add quirk for APM X-Gene SoC) Signed-off-by: Heikki Krogerus Tested-by: Yazen Ghannam Tested-by: Jérôme de Bretagne Reviewed-by: Andy Shevchenko Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpi_apd.c | 10 ++-------- drivers/acpi/acpi_lpss.c | 10 ++-------- drivers/acpi/acpi_platform.c | 5 ++++- drivers/acpi/dptf/int340x_thermal.c | 4 ++-- drivers/acpi/scan.c | 2 +- drivers/platform/x86/intel-hid.c | 2 +- drivers/platform/x86/intel-vbtn.c | 2 +- include/linux/acpi.h | 3 ++- 8 files changed, 15 insertions(+), 23 deletions(-) diff --git a/drivers/acpi/acpi_apd.c b/drivers/acpi/acpi_apd.c index 5f112d811e42..5959ed996a75 100644 --- a/drivers/acpi/acpi_apd.c +++ b/drivers/acpi/acpi_apd.c @@ -117,7 +117,7 @@ static int acpi_apd_create_device(struct acpi_device *adev, int ret; if (!dev_desc) { - pdev = acpi_create_platform_device(adev); + pdev = acpi_create_platform_device(adev, NULL); return IS_ERR_OR_NULL(pdev) ? PTR_ERR(pdev) : 1; } @@ -134,14 +134,8 @@ static int acpi_apd_create_device(struct acpi_device *adev, goto err_out; } - if (dev_desc->properties) { - ret = device_add_properties(&adev->dev, dev_desc->properties); - if (ret) - goto err_out; - } - adev->driver_data = pdata; - pdev = acpi_create_platform_device(adev); + pdev = acpi_create_platform_device(adev, dev_desc->properties); if (!IS_ERR_OR_NULL(pdev)) return 1; diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c index 552010288135..373657f7e35a 100644 --- a/drivers/acpi/acpi_lpss.c +++ b/drivers/acpi/acpi_lpss.c @@ -395,7 +395,7 @@ static int acpi_lpss_create_device(struct acpi_device *adev, dev_desc = (const struct lpss_device_desc *)id->driver_data; if (!dev_desc) { - pdev = acpi_create_platform_device(adev); + pdev = acpi_create_platform_device(adev, NULL); return IS_ERR_OR_NULL(pdev) ? PTR_ERR(pdev) : 1; } pdata = kzalloc(sizeof(*pdata), GFP_KERNEL); @@ -451,14 +451,8 @@ static int acpi_lpss_create_device(struct acpi_device *adev, goto err_out; } - if (dev_desc->properties) { - ret = device_add_properties(&adev->dev, dev_desc->properties); - if (ret) - goto err_out; - } - adev->driver_data = pdata; - pdev = acpi_create_platform_device(adev); + pdev = acpi_create_platform_device(adev, dev_desc->properties); if (!IS_ERR_OR_NULL(pdev)) { return 1; } diff --git a/drivers/acpi/acpi_platform.c b/drivers/acpi/acpi_platform.c index 159f7f19abce..56e70da83c6c 100644 --- a/drivers/acpi/acpi_platform.c +++ b/drivers/acpi/acpi_platform.c @@ -33,6 +33,7 @@ static const struct acpi_device_id forbidden_id_list[] = { /** * acpi_create_platform_device - Create platform device for ACPI device node * @adev: ACPI device node to create a platform device for. + * @properties: Optional collection of build-in properties. * * Check if the given @adev can be represented as a platform device and, if * that's the case, create and register a platform device, populate its common @@ -40,7 +41,8 @@ static const struct acpi_device_id forbidden_id_list[] = { * * Name of the platform device will be the same as @adev's. */ -struct platform_device *acpi_create_platform_device(struct acpi_device *adev) +struct platform_device *acpi_create_platform_device(struct acpi_device *adev, + struct property_entry *properties) { struct platform_device *pdev = NULL; struct platform_device_info pdevinfo; @@ -88,6 +90,7 @@ struct platform_device *acpi_create_platform_device(struct acpi_device *adev) pdevinfo.res = resources; pdevinfo.num_res = count; pdevinfo.fwnode = acpi_fwnode_handle(adev); + pdevinfo.properties = properties; if (acpi_dma_supported(adev)) pdevinfo.dma_mask = DMA_BIT_MASK(32); diff --git a/drivers/acpi/dptf/int340x_thermal.c b/drivers/acpi/dptf/int340x_thermal.c index 33505c651f62..86364097e236 100644 --- a/drivers/acpi/dptf/int340x_thermal.c +++ b/drivers/acpi/dptf/int340x_thermal.c @@ -34,11 +34,11 @@ static int int340x_thermal_handler_attach(struct acpi_device *adev, const struct acpi_device_id *id) { if (IS_ENABLED(CONFIG_INT340X_THERMAL)) - acpi_create_platform_device(adev); + acpi_create_platform_device(adev, NULL); /* Intel SoC DTS thermal driver needs INT3401 to set IRQ descriptor */ else if (IS_ENABLED(CONFIG_INTEL_SOC_DTS_THERMAL) && id->driver_data == INT3401_DEVICE) - acpi_create_platform_device(adev); + acpi_create_platform_device(adev, NULL); return 1; } diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index ad9fc84a8601..3d31ae3a482d 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -1734,7 +1734,7 @@ static void acpi_default_enumeration(struct acpi_device *device) &is_spi_i2c_slave); acpi_dev_free_resource_list(&resource_list); if (!is_spi_i2c_slave) { - acpi_create_platform_device(device); + acpi_create_platform_device(device, NULL); acpi_device_set_enumerated(device); } else { blocking_notifier_call_chain(&acpi_reconfig_chain, diff --git a/drivers/platform/x86/intel-hid.c b/drivers/platform/x86/intel-hid.c index ed5874217ee7..12dbb5063376 100644 --- a/drivers/platform/x86/intel-hid.c +++ b/drivers/platform/x86/intel-hid.c @@ -264,7 +264,7 @@ check_acpi_dev(acpi_handle handle, u32 lvl, void *context, void **rv) return AE_OK; if (acpi_match_device_ids(dev, ids) == 0) - if (acpi_create_platform_device(dev)) + if (acpi_create_platform_device(dev, NULL)) dev_info(&dev->dev, "intel-hid: created platform device\n"); diff --git a/drivers/platform/x86/intel-vbtn.c b/drivers/platform/x86/intel-vbtn.c index 146d02f8c9bc..78080763df51 100644 --- a/drivers/platform/x86/intel-vbtn.c +++ b/drivers/platform/x86/intel-vbtn.c @@ -164,7 +164,7 @@ check_acpi_dev(acpi_handle handle, u32 lvl, void *context, void **rv) return AE_OK; if (acpi_match_device_ids(dev, ids) == 0) - if (acpi_create_platform_device(dev)) + if (acpi_create_platform_device(dev, NULL)) dev_info(&dev->dev, "intel-vbtn: created platform device\n"); diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 632ec16a855e..c09936f55166 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -546,7 +546,8 @@ int acpi_device_uevent_modalias(struct device *, struct kobj_uevent_env *); int acpi_device_modalias(struct device *, char *, int); void acpi_walk_dep_device_list(acpi_handle handle); -struct platform_device *acpi_create_platform_device(struct acpi_device *); +struct platform_device *acpi_create_platform_device(struct acpi_device *, + struct property_entry *); #define ACPI_PTR(_ptr) (_ptr) static inline void acpi_device_set_enumerated(struct acpi_device *adev) From 3e884493448131179a5b7cae1ddca1028ffaecc8 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Mon, 7 Nov 2016 10:51:40 -0600 Subject: [PATCH 488/792] net: qcom/emac: configure the external phy to allow pause frames Pause frames are used to enable flow control. A MAC can send and receive pause frames in order to throttle traffic. However, the PHY must be configured to allow those frames to pass through. Reviewed-by: Florian Fainelli Signed-off-by: Timur Tabi Signed-off-by: David S. Miller --- drivers/net/ethernet/qualcomm/emac/emac-mac.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/ethernet/qualcomm/emac/emac-mac.c b/drivers/net/ethernet/qualcomm/emac/emac-mac.c index 6fb3bee904d3..70a55dcc431d 100644 --- a/drivers/net/ethernet/qualcomm/emac/emac-mac.c +++ b/drivers/net/ethernet/qualcomm/emac/emac-mac.c @@ -1003,6 +1003,12 @@ int emac_mac_up(struct emac_adapter *adpt) writel((u32)~DIS_INT, adpt->base + EMAC_INT_STATUS); writel(adpt->irq.mask, adpt->base + EMAC_INT_MASK); + /* Enable pause frames. Without this feature, the EMAC has been shown + * to receive (and drop) frames with FCS errors at gigabit connections. + */ + adpt->phydev->supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause; + adpt->phydev->advertising |= SUPPORTED_Pause | SUPPORTED_Asym_Pause; + adpt->phydev->irq = PHY_IGNORE_INTERRUPT; phy_start(adpt->phydev); From df63022e182de4041b65ae22df1950d3416b577e Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Mon, 7 Nov 2016 10:51:41 -0600 Subject: [PATCH 489/792] net: qcom/emac: enable flow control if requested If the PHY has been configured to allow pause frames, then the MAC should be configured to generate and/or accept those frames. Signed-off-by: Timur Tabi Signed-off-by: David S. Miller --- drivers/net/ethernet/qualcomm/emac/emac-mac.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/qualcomm/emac/emac-mac.c b/drivers/net/ethernet/qualcomm/emac/emac-mac.c index 70a55dcc431d..0b4deb31e742 100644 --- a/drivers/net/ethernet/qualcomm/emac/emac-mac.c +++ b/drivers/net/ethernet/qualcomm/emac/emac-mac.c @@ -575,10 +575,11 @@ void emac_mac_start(struct emac_adapter *adpt) mac |= TXEN | RXEN; /* enable RX/TX */ - /* We don't have ethtool support yet, so force flow-control mode - * to 'full' always. - */ - mac |= TXFC | RXFC; + /* Configure MAC flow control to match the PHY's settings. */ + if (phydev->pause) + mac |= RXFC; + if (phydev->pause != phydev->asym_pause) + mac |= TXFC; /* setup link speed */ mac &= ~SPEED_MASK; From 9d1a6c4ea43e48c7880c85971c17939b56832d8a Mon Sep 17 00:00:00 2001 From: David Ahern Date: Mon, 7 Nov 2016 12:03:09 -0800 Subject: [PATCH 490/792] net: icmp_route_lookup should use rt dev to determine L3 domain icmp_send is called in response to some event. The skb may not have the device set (skb->dev is NULL), but it is expected to have an rt. Update icmp_route_lookup to use the rt on the skb to determine L3 domain. Fixes: 613d09b30f8b ("net: Use VRF device index for lookups on TX") Signed-off-by: David Ahern Signed-off-by: David S. Miller --- net/ipv4/icmp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c index 38abe70e595f..48734ee6293f 100644 --- a/net/ipv4/icmp.c +++ b/net/ipv4/icmp.c @@ -477,7 +477,7 @@ static struct rtable *icmp_route_lookup(struct net *net, fl4->flowi4_proto = IPPROTO_ICMP; fl4->fl4_icmp_type = type; fl4->fl4_icmp_code = code; - fl4->flowi4_oif = l3mdev_master_ifindex(skb_in->dev); + fl4->flowi4_oif = l3mdev_master_ifindex(skb_dst(skb_in)->dev); security_skb_classify_flow(skb_in, flowi4_to_flowi(fl4)); rt = __ip_route_output_key_hash(net, fl4, @@ -502,7 +502,7 @@ static struct rtable *icmp_route_lookup(struct net *net, if (err) goto relookup_failed; - if (inet_addr_type_dev_table(net, skb_in->dev, + if (inet_addr_type_dev_table(net, skb_dst(skb_in)->dev, fl4_dec.saddr) == RTN_LOCAL) { rt2 = __ip_route_output_key(net, &fl4_dec); if (IS_ERR(rt2)) From 6dbcd8fb5968fda3a5fba019dfb0c80c3139627b Mon Sep 17 00:00:00 2001 From: John Allen Date: Mon, 7 Nov 2016 14:27:28 -0600 Subject: [PATCH 491/792] ibmvnic: Start completion queue negotiation at server-provided optimum values Use the opt_* fields to determine the starting point for negotiating the number of tx/rx completion queues with the vnic server. These contain the number of queues that the vnic server estimates that it will be able to allocate. While renegotiation may still occur, using the opt_* fields will reduce the number of times this needs to happen and will prevent driver probe timeout on systems using large numbers of ibmvnic client devices per vnic port. Signed-off-by: John Allen Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmvnic.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index 5f44c5520fbc..f6c9b6d38ac7 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -1505,9 +1505,8 @@ static void init_sub_crqs(struct ibmvnic_adapter *adapter, int retry) adapter->max_rx_add_entries_per_subcrq > entries_page ? entries_page : adapter->max_rx_add_entries_per_subcrq; - /* Choosing the maximum number of queues supported by firmware*/ - adapter->req_tx_queues = adapter->max_tx_queues; - adapter->req_rx_queues = adapter->max_rx_queues; + adapter->req_tx_queues = adapter->opt_tx_comp_sub_queues; + adapter->req_rx_queues = adapter->opt_rx_comp_queues; adapter->req_rx_add_queues = adapter->max_rx_add_queues; adapter->req_mtu = adapter->max_mtu; From 4053ab1bf98dd128344b9e67ef139f931a967ae1 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 7 Nov 2016 22:09:07 +0100 Subject: [PATCH 492/792] vxlan: hide unused local variable A bugfix introduced a harmless warning in v4.9-rc4: drivers/net/vxlan.c: In function 'vxlan_group_used': drivers/net/vxlan.c:947:21: error: unused variable 'sock6' [-Werror=unused-variable] This hides the variable inside of the same #ifdef that is around its user. The extraneous initialization is removed at the same time, it was accidentally introduced in the same commit. Fixes: c6fcc4fc5f8b ("vxlan: avoid using stale vxlan socket.") Signed-off-by: Arnd Bergmann Acked-by: Jiri Benc Signed-off-by: David S. Miller --- drivers/net/vxlan.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index f3c2fa3ab0d5..24532cdebb00 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -944,7 +944,9 @@ static bool vxlan_group_used(struct vxlan_net *vn, struct vxlan_dev *dev) { struct vxlan_dev *vxlan; struct vxlan_sock *sock4; - struct vxlan_sock *sock6 = NULL; +#if IS_ENABLED(CONFIG_IPV6) + struct vxlan_sock *sock6; +#endif unsigned short family = dev->default_dst.remote_ip.sa.sa_family; sock4 = rtnl_dereference(dev->vn4_sock); From d8e9e5e80e882b4f90cba7edf1e6cb7376e52e54 Mon Sep 17 00:00:00 2001 From: Richard Weinberger Date: Wed, 9 Nov 2016 22:52:58 +0100 Subject: [PATCH 493/792] drbd: Fix kernel_sendmsg() usage - potential NULL deref Don't pass a size larger than iov_len to kernel_sendmsg(). Otherwise it will cause a NULL pointer deref when kernel_sendmsg() returns with rv < size. DRBD as external module has been around in the kernel 2.4 days already. We used to be compatible to 2.4 and very early 2.6 kernels, we used to use rv = sock_sendmsg(sock, &msg, iov.iov_len); then later changed to rv = kernel_sendmsg(sock, &msg, &iov, 1, size); when we should have used rv = kernel_sendmsg(sock, &msg, &iov, 1, iov.iov_len); tcp_sendmsg() used to totally ignore the size parameter. 57be5bd ip: convert tcp_sendmsg() to iov_iter primitives changes that, and exposes our long standing error. Even with this error exposed, to trigger the bug, we would need to have an environment (config or otherwise) causing us to not use sendpage() for larger transfers, a failing connection, and have it fail "just at the right time". Apparently that was unlikely enough for most, so this went unnoticed for years. Still, it is known to trigger at least some of these, and suspected for the others: [0] http://lists.linbit.com/pipermail/drbd-user/2016-July/023112.html [1] http://lists.linbit.com/pipermail/drbd-dev/2016-March/003362.html [2] https://forums.grsecurity.net/viewtopic.php?f=3&t=4546 [3] https://ubuntuforums.org/showthread.php?t=2336150 [4] http://e2.howsolveproblem.com/i/1175162/ This should go into 4.9, and into all stable branches since and including v4.0, which is the first to contain the exposing change. It is correct for all stable branches older than that as well (which contain the DRBD driver; which is 2.6.33 and up). It requires a small "conflict" resolution for v4.4 and earlier, with v4.5 we dropped the comment block immediately preceding the kernel_sendmsg(). Fixes: b411b3637fa7 ("The DRBD driver") Cc: # 2.6.33.x- Cc: viro@zeniv.linux.org.uk Cc: christoph.lechleitner@iteg.at Cc: wolfgang.glas@iteg.at Reported-by: Christoph Lechleitner Tested-by: Christoph Lechleitner Signed-off-by: Richard Weinberger [changed oneliner to be "obvious" without context; more verbose message] Signed-off-by: Lars Ellenberg Signed-off-by: Jens Axboe --- drivers/block/drbd/drbd_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c index 100be556e613..83482721bc01 100644 --- a/drivers/block/drbd/drbd_main.c +++ b/drivers/block/drbd/drbd_main.c @@ -1871,7 +1871,7 @@ int drbd_send(struct drbd_connection *connection, struct socket *sock, drbd_update_congested(connection); } do { - rv = kernel_sendmsg(sock, &msg, &iov, 1, size); + rv = kernel_sendmsg(sock, &msg, &iov, 1, iov.iov_len); if (rv == -EAGAIN) { if (we_should_drop_the_connection(connection, sock)) break; From f567e950bf51290755a2539ff2aaef4c26f735d3 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Mon, 7 Nov 2016 23:22:19 +0100 Subject: [PATCH 494/792] rtnl: reset calcit fptr in rtnl_unregister() To avoid having dangling function pointers left behind, reset calcit in rtnl_unregister(), too. This is no issue so far, as only the rtnl core registers a netlink handler with a calcit hook which won't be unregistered, but may become one if new code makes use of the calcit hook. Fixes: c7ac8679bec9 ("rtnetlink: Compute and store minimum ifinfo...") Cc: Jeff Kirsher Cc: Greg Rose Signed-off-by: Mathias Krause Signed-off-by: David S. Miller --- net/core/rtnetlink.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c index fb7348f13501..db313ec7af32 100644 --- a/net/core/rtnetlink.c +++ b/net/core/rtnetlink.c @@ -275,6 +275,7 @@ int rtnl_unregister(int protocol, int msgtype) rtnl_msg_handlers[protocol][msgindex].doit = NULL; rtnl_msg_handlers[protocol][msgindex].dumpit = NULL; + rtnl_msg_handlers[protocol][msgindex].calcit = NULL; return 0; } From 8da3cf2a49a6d0ca5e620c6a5eee49b99a3f0880 Mon Sep 17 00:00:00 2001 From: Allan Chou Date: Tue, 8 Nov 2016 16:08:01 -0600 Subject: [PATCH 495/792] Net Driver: Add Cypress GX3 VID=04b4 PID=3610. Add support for Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller (Vendor=04b4 ProdID=3610). Patch verified on x64 linux kernel 4.7.4, 4.8.6, 4.9-rc4 systems with the Kensington SD4600P USB-C Universal Dock with Power, which uses the Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller. A similar patch was signed-off and tested-by Allan Chou on 2015-12-01. Allan verified his similar patch on x86 Linux kernel 4.1.6 system with Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller. Tested-by: Allan Chou Tested-by: Chris Roth Tested-by: Artjom Simon Signed-off-by: Allan Chou Signed-off-by: Chris Roth Signed-off-by: David S. Miller --- drivers/net/usb/ax88179_178a.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c index e6338c16081a..8a6675d92b98 100644 --- a/drivers/net/usb/ax88179_178a.c +++ b/drivers/net/usb/ax88179_178a.c @@ -1656,6 +1656,19 @@ static const struct driver_info ax88178a_info = { .tx_fixup = ax88179_tx_fixup, }; +static const struct driver_info cypress_GX3_info = { + .description = "Cypress GX3 SuperSpeed to Gigabit Ethernet Controller", + .bind = ax88179_bind, + .unbind = ax88179_unbind, + .status = ax88179_status, + .link_reset = ax88179_link_reset, + .reset = ax88179_reset, + .stop = ax88179_stop, + .flags = FLAG_ETHER | FLAG_FRAMING_AX, + .rx_fixup = ax88179_rx_fixup, + .tx_fixup = ax88179_tx_fixup, +}; + static const struct driver_info dlink_dub1312_info = { .description = "D-Link DUB-1312 USB 3.0 to Gigabit Ethernet Adapter", .bind = ax88179_bind, @@ -1717,6 +1730,10 @@ static const struct usb_device_id products[] = { /* ASIX AX88178A 10/100/1000 */ USB_DEVICE(0x0b95, 0x178a), .driver_info = (unsigned long)&ax88178a_info, +}, { + /* Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller */ + USB_DEVICE(0x04b4, 0x3610), + .driver_info = (unsigned long)&cypress_GX3_info, }, { /* D-Link DUB-1312 USB 3.0 to Gigabit Ethernet Adapter */ USB_DEVICE(0x2001, 0x4a00), From 9b6c14d51bd2304b92f842e96172a9cc822fc77c Mon Sep 17 00:00:00 2001 From: David Ahern Date: Wed, 9 Nov 2016 09:07:26 -0800 Subject: [PATCH 496/792] net: tcp response should set oif only if it is L3 master Lorenzo noted an Android unit test failed due to e0d56fdd7342: "The expectation in the test was that the RST replying to a SYN sent to a closed port should be generated with oif=0. In other words it should not prefer the interface where the SYN came in on, but instead should follow whatever the routing table says it should do." Revert the change to ip_send_unicast_reply and tcp_v6_send_response such that the oif in the flow is set to the skb_iif only if skb_iif is an L3 master. Fixes: e0d56fdd7342 ("net: l3mdev: remove redundant calls") Reported-by: Lorenzo Colitti Signed-off-by: David Ahern Tested-by: Lorenzo Colitti Acked-by: Lorenzo Colitti Signed-off-by: David S. Miller --- net/ipv4/ip_output.c | 3 ++- net/ipv6/tcp_ipv6.c | 8 ++++++-- 2 files changed, 8 insertions(+), 3 deletions(-) diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c index 49714010ac2e..9403fa3850be 100644 --- a/net/ipv4/ip_output.c +++ b/net/ipv4/ip_output.c @@ -1577,7 +1577,8 @@ void ip_send_unicast_reply(struct sock *sk, struct sk_buff *skb, } oif = arg->bound_dev_if; - oif = oif ? : skb->skb_iif; + if (!oif && netif_index_is_l3_master(net, skb->skb_iif)) + oif = skb->skb_iif; flowi4_init_output(&fl4, oif, IP4_REPLY_MARK(net, skb->mark), diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index 5a27ab4eab39..6ca23c2e76f7 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -818,8 +818,12 @@ static void tcp_v6_send_response(const struct sock *sk, struct sk_buff *skb, u32 fl6.flowi6_proto = IPPROTO_TCP; if (rt6_need_strict(&fl6.daddr) && !oif) fl6.flowi6_oif = tcp_v6_iif(skb); - else - fl6.flowi6_oif = oif ? : skb->skb_iif; + else { + if (!oif && netif_index_is_l3_master(net, skb->skb_iif)) + oif = skb->skb_iif; + + fl6.flowi6_oif = oif; + } fl6.flowi6_mark = IP6_REPLY_MARK(net, skb->mark); fl6.fl6_dport = t1->dest; From 2ecb704a1290edb5e3d53a75529192e7ed2a1a28 Mon Sep 17 00:00:00 2001 From: Hui Wang Date: Thu, 10 Nov 2016 13:20:05 +0800 Subject: [PATCH 497/792] ALSA: hda - add a new condition to check if it is thinkpad Latest Thinkpad laptops use the HKEY_HID LEN0268 instead of the LEN0068, as a result neither audio mute led nor mic mute led can work any more. After adding the new HKEY_HID into the is_thinkpad(), both of them works well as before. Cc: Signed-off-by: Hui Wang Signed-off-by: Takashi Iwai --- sound/pci/hda/thinkpad_helper.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/thinkpad_helper.c b/sound/pci/hda/thinkpad_helper.c index 6a23302297c9..4d9d320a7971 100644 --- a/sound/pci/hda/thinkpad_helper.c +++ b/sound/pci/hda/thinkpad_helper.c @@ -13,7 +13,8 @@ static void (*old_vmaster_hook)(void *, int); static bool is_thinkpad(struct hda_codec *codec) { return (codec->core.subsystem_id >> 16 == 0x17aa) && - (acpi_dev_found("LEN0068") || acpi_dev_found("IBM0068")); + (acpi_dev_found("LEN0068") || acpi_dev_found("LEN0268") || + acpi_dev_found("IBM0068")); } static void update_tpacpi_mute_led(void *private_data, int enabled) From 18266403f3fe507f0246faa1d5432333a2f139ca Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 8 Nov 2016 13:10:57 +0100 Subject: [PATCH 498/792] USB: cdc-acm: fix TIOCMIWAIT The TIOCMIWAIT implementation would return -EINVAL if any of the three supported signals were included in the mask. Instead of returning an error in case TIOCM_CTS is included, simply drop the mask check completely, which is in accordance with how other drivers implement this ioctl. Fixes: 5a6a62bdb925 ("cdc-acm: add TIOCMIWAIT") Cc: stable Signed-off-by: Johan Hovold Acked-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 4ad4ca44058b..fada988512a1 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -932,8 +932,6 @@ static int wait_serial_change(struct acm *acm, unsigned long arg) DECLARE_WAITQUEUE(wait, current); struct async_icount old, new; - if (arg & (TIOCM_DSR | TIOCM_RI | TIOCM_CD)) - return -EINVAL; do { spin_lock_irq(&acm->read_lock); old = acm->oldcount; From b13d14339baaaa720e7e5448855f33ba501917aa Mon Sep 17 00:00:00 2001 From: Jann Horn Date: Sun, 30 Oct 2016 23:19:24 +0100 Subject: [PATCH 499/792] ppdev: fix double-free of pp->pdev->name free_pardevice() is called by parport_unregister_device() and already frees pp->pdev->name, don't try to do it again. This bug causes kernel crashes. I found and verified this with KASAN and some added pr_emerg()s: [ 60.316568] pp_release: pp->pdev->name == ffff88039cb264c0 [ 60.316692] free_pardevice: freeing par_dev->name at ffff88039cb264c0 [ 60.316706] pp_release: kfree(ffff88039cb264c0) [ 60.316714] ========================================================== [ 60.316722] BUG: Double free or freeing an invalid pointer [ 60.316731] Unexpected shadow byte: 0xFB [ 60.316801] Object at ffff88039cb264c0, in cache kmalloc-32 size: 32 [ 60.316813] Allocated: [ 60.316824] PID = 1695 [ 60.316869] Freed: [ 60.316880] PID = 1695 [ 60.316935] ========================================================== Signed-off-by: Jann Horn Acked-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman --- drivers/char/ppdev.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/char/ppdev.c b/drivers/char/ppdev.c index d23368874710..6af1ce04b3da 100644 --- a/drivers/char/ppdev.c +++ b/drivers/char/ppdev.c @@ -748,10 +748,7 @@ static int pp_release(struct inode *inode, struct file *file) } if (pp->pdev) { - const char *name = pp->pdev->name; - parport_unregister_device(pp->pdev); - kfree(name); pp->pdev = NULL; pr_debug(CHRDEV "%x: unregistered pardevice\n", minor); } From 62bdf94a2049822ef8c6d4b0e83cd9c3a1663ab4 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Mon, 7 Nov 2016 16:16:24 -0500 Subject: [PATCH 500/792] xprtrdma: Fix DMAR failure in frwr_op_map() after reconnect When a LOCALINV WR is flushed, the frmr is marked STALE, then frwr_op_unmap_sync DMA-unmaps the frmr's SGL. These STALE frmrs are then recovered when frwr_op_map hunts for an INVALID frmr to use. All other cases that need frmr recovery leave that SGL DMA-mapped. The FRMR recovery path unconditionally DMA-unmaps the frmr's SGL. To avoid DMA unmapping the SGL twice for flushed LOCAL_INV WRs, alter the recovery logic (rather than the hot frwr_op_unmap_sync path) to distinguish among these cases. This solution also takes care of the case where multiple LOCAL_INV WRs are issued for the same rpcrdma_req, some complete successfully, but some are flushed. Reported-by: Vasco Steinmetz Signed-off-by: Chuck Lever Tested-by: Vasco Steinmetz Signed-off-by: Anna Schumaker --- net/sunrpc/xprtrdma/frwr_ops.c | 37 ++++++++++++++++++++------------- net/sunrpc/xprtrdma/xprt_rdma.h | 3 ++- 2 files changed, 24 insertions(+), 16 deletions(-) diff --git a/net/sunrpc/xprtrdma/frwr_ops.c b/net/sunrpc/xprtrdma/frwr_ops.c index 210949562786..26b26beef2d4 100644 --- a/net/sunrpc/xprtrdma/frwr_ops.c +++ b/net/sunrpc/xprtrdma/frwr_ops.c @@ -44,18 +44,20 @@ * being done. * * When the underlying transport disconnects, MRs are left in one of - * three states: + * four states: * * INVALID: The MR was not in use before the QP entered ERROR state. - * (Or, the LOCAL_INV WR has not completed or flushed yet). - * - * STALE: The MR was being registered or unregistered when the QP - * entered ERROR state, and the pending WR was flushed. * * VALID: The MR was registered before the QP entered ERROR state. * - * When frwr_op_map encounters STALE and VALID MRs, they are recovered - * with ib_dereg_mr and then are re-initialized. Beause MR recovery + * FLUSHED_FR: The MR was being registered when the QP entered ERROR + * state, and the pending WR was flushed. + * + * FLUSHED_LI: The MR was being invalidated when the QP entered ERROR + * state, and the pending WR was flushed. + * + * When frwr_op_map encounters FLUSHED and VALID MRs, they are recovered + * with ib_dereg_mr and then are re-initialized. Because MR recovery * allocates fresh resources, it is deferred to a workqueue, and the * recovered MRs are placed back on the rb_mws list when recovery is * complete. frwr_op_map allocates another MR for the current RPC while @@ -177,12 +179,15 @@ __frwr_reset_mr(struct rpcrdma_ia *ia, struct rpcrdma_mw *r) static void frwr_op_recover_mr(struct rpcrdma_mw *mw) { + enum rpcrdma_frmr_state state = mw->frmr.fr_state; struct rpcrdma_xprt *r_xprt = mw->mw_xprt; struct rpcrdma_ia *ia = &r_xprt->rx_ia; int rc; rc = __frwr_reset_mr(ia, mw); - ib_dma_unmap_sg(ia->ri_device, mw->mw_sg, mw->mw_nents, mw->mw_dir); + if (state != FRMR_FLUSHED_LI) + ib_dma_unmap_sg(ia->ri_device, + mw->mw_sg, mw->mw_nents, mw->mw_dir); if (rc) goto out_release; @@ -262,10 +267,8 @@ frwr_op_maxpages(struct rpcrdma_xprt *r_xprt) } static void -__frwr_sendcompletion_flush(struct ib_wc *wc, struct rpcrdma_frmr *frmr, - const char *wr) +__frwr_sendcompletion_flush(struct ib_wc *wc, const char *wr) { - frmr->fr_state = FRMR_IS_STALE; if (wc->status != IB_WC_WR_FLUSH_ERR) pr_err("rpcrdma: %s: %s (%u/0x%x)\n", wr, ib_wc_status_msg(wc->status), @@ -288,7 +291,8 @@ frwr_wc_fastreg(struct ib_cq *cq, struct ib_wc *wc) if (wc->status != IB_WC_SUCCESS) { cqe = wc->wr_cqe; frmr = container_of(cqe, struct rpcrdma_frmr, fr_cqe); - __frwr_sendcompletion_flush(wc, frmr, "fastreg"); + frmr->fr_state = FRMR_FLUSHED_FR; + __frwr_sendcompletion_flush(wc, "fastreg"); } } @@ -308,7 +312,8 @@ frwr_wc_localinv(struct ib_cq *cq, struct ib_wc *wc) if (wc->status != IB_WC_SUCCESS) { cqe = wc->wr_cqe; frmr = container_of(cqe, struct rpcrdma_frmr, fr_cqe); - __frwr_sendcompletion_flush(wc, frmr, "localinv"); + frmr->fr_state = FRMR_FLUSHED_LI; + __frwr_sendcompletion_flush(wc, "localinv"); } } @@ -328,8 +333,10 @@ frwr_wc_localinv_wake(struct ib_cq *cq, struct ib_wc *wc) /* WARNING: Only wr_cqe and status are reliable at this point */ cqe = wc->wr_cqe; frmr = container_of(cqe, struct rpcrdma_frmr, fr_cqe); - if (wc->status != IB_WC_SUCCESS) - __frwr_sendcompletion_flush(wc, frmr, "localinv"); + if (wc->status != IB_WC_SUCCESS) { + frmr->fr_state = FRMR_FLUSHED_LI; + __frwr_sendcompletion_flush(wc, "localinv"); + } complete(&frmr->fr_linv_done); } diff --git a/net/sunrpc/xprtrdma/xprt_rdma.h b/net/sunrpc/xprtrdma/xprt_rdma.h index 0d35b761c883..6e1bba358203 100644 --- a/net/sunrpc/xprtrdma/xprt_rdma.h +++ b/net/sunrpc/xprtrdma/xprt_rdma.h @@ -216,7 +216,8 @@ struct rpcrdma_rep { enum rpcrdma_frmr_state { FRMR_IS_INVALID, /* ready to be used */ FRMR_IS_VALID, /* in use */ - FRMR_IS_STALE, /* failed completion */ + FRMR_FLUSHED_FR, /* flushed FASTREG WR */ + FRMR_FLUSHED_LI, /* flushed LOCALINV WR */ }; struct rpcrdma_frmr { From 0a866d38ef3c13cf5834b78df21ee4c39bb5a689 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 9 Nov 2016 18:01:01 -0500 Subject: [PATCH 501/792] drm/amd/powerplay: propagate errors in phm_get_voltage_evv_on_sclk Missing for one case. bugs: https://bugzilla.kernel.org/show_bug.cgi?id=185681 https://bugs.freedesktop.org/show_bug.cgi?id=98357 Reviewed-by: Rex Zhu Reviewed-by: Huang Rui Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c index 2ba7937d2545..520665e1ef12 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c @@ -711,7 +711,7 @@ int phm_get_voltage_evv_on_sclk(struct pp_hwmgr *hwmgr, uint8_t voltage_type, int ret = 0; if (hwmgr->chip_id < CHIP_POLARIS10) { - atomctrl_get_voltage_evv_on_sclk(hwmgr, voltage_type, sclk, id, voltage); + ret = atomctrl_get_voltage_evv_on_sclk(hwmgr, voltage_type, sclk, id, voltage); if (*voltage >= 2000 || *voltage == 0) *voltage = 1150; } else { From 90ebf11857c2743fab1b2b64140aff24e256e758 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 9 Nov 2016 18:04:54 -0500 Subject: [PATCH 502/792] drm/amd/powerplay: update phm_get_voltage_evv_on_sclk for iceland Was missing the handling for iceland. bugs: https://bugzilla.kernel.org/show_bug.cgi?id=185681 https://bugs.freedesktop.org/show_bug.cgi?id=98357 Reviewed-by: Rex Zhu Reviewed-by: Huang Rui Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c index 520665e1ef12..e03dcb6ea9c1 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/hwmgr.c @@ -710,7 +710,9 @@ int phm_get_voltage_evv_on_sclk(struct pp_hwmgr *hwmgr, uint8_t voltage_type, uint32_t vol; int ret = 0; - if (hwmgr->chip_id < CHIP_POLARIS10) { + if (hwmgr->chip_id < CHIP_TONGA) { + ret = atomctrl_get_voltage_evv(hwmgr, id, voltage); + } else if (hwmgr->chip_id < CHIP_POLARIS10) { ret = atomctrl_get_voltage_evv_on_sclk(hwmgr, voltage_type, sclk, id, voltage); if (*voltage >= 2000 || *voltage == 0) *voltage = 1150; From 0f12f73c5175d39445fa10cdca4481f80efdef49 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 9 Nov 2016 17:52:42 -0500 Subject: [PATCH 503/792] drm/amd/powerplay/smu7: fix checks in smu7_get_evv_voltages (v2) Only check if the tables exist in relevant configs. This fixes a failure on V0 tables. v2: fix version check as suggested by Rex bugs: https://bugzilla.kernel.org/show_bug.cgi?id=185681 https://bugs.freedesktop.org/show_bug.cgi?id=98357 Reviewed-by: Rex Zhu Reviewed-by: Huang Rui Signed-off-by: Alex Deucher --- .../gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c index 51fb86f20c21..f41cddf2a16b 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c @@ -1460,19 +1460,19 @@ static int smu7_get_evv_voltages(struct pp_hwmgr *hwmgr) struct phm_ppt_v1_clock_voltage_dependency_table *sclk_table = NULL; - if (table_info == NULL) - return -EINVAL; - - sclk_table = table_info->vdd_dep_on_sclk; - for (i = 0; i < SMU7_MAX_LEAKAGE_COUNT; i++) { vv_id = ATOM_VIRTUAL_VOLTAGE_ID0 + i; if (data->vdd_gfx_control == SMU7_VOLTAGE_CONTROL_BY_SVID2) { - if (0 == phm_get_sclk_for_voltage_evv(hwmgr, + if ((hwmgr->pp_table_version == PP_TABLE_V1) + && !phm_get_sclk_for_voltage_evv(hwmgr, table_info->vddgfx_lookup_table, vv_id, &sclk)) { if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps, PHM_PlatformCaps_ClockStretcher)) { + if (table_info == NULL) + return -EINVAL; + sclk_table = table_info->vdd_dep_on_sclk; + for (j = 1; j < sclk_table->count; j++) { if (sclk_table->entries[j].clk == sclk && sclk_table->entries[j].cks_enable == 0) { @@ -1498,12 +1498,15 @@ static int smu7_get_evv_voltages(struct pp_hwmgr *hwmgr) } } } else { - if ((hwmgr->pp_table_version == PP_TABLE_V0) || !phm_get_sclk_for_voltage_evv(hwmgr, table_info->vddc_lookup_table, vv_id, &sclk)) { if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps, PHM_PlatformCaps_ClockStretcher)) { + if (table_info == NULL) + return -EINVAL; + sclk_table = table_info->vdd_dep_on_sclk; + for (j = 1; j < sclk_table->count; j++) { if (sclk_table->entries[j].clk == sclk && sclk_table->entries[j].cks_enable == 0) { From 0ace81ec7192201af48528c309ee0b4103021f55 Mon Sep 17 00:00:00 2001 From: Lance Richardson Date: Wed, 9 Nov 2016 15:04:39 -0500 Subject: [PATCH 504/792] ipv4: update comment to document GSO fragmentation cases. This is a follow-up to commit 9ee6c5dc816a ("ipv4: allow local fragmentation in ip_finish_output_gso()"), updating the comment documenting cases in which fragmentation is needed for egress GSO packets. Suggested-by: Shmulik Ladkani Reviewed-by: Shmulik Ladkani Signed-off-by: Lance Richardson Signed-off-by: David S. Miller --- net/ipv4/ip_output.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c index 9403fa3850be..105908d841a3 100644 --- a/net/ipv4/ip_output.c +++ b/net/ipv4/ip_output.c @@ -244,12 +244,18 @@ static int ip_finish_output_gso(struct net *net, struct sock *sk, if (skb_gso_validate_mtu(skb, mtu)) return ip_finish_output2(net, sk, skb); - /* Slowpath - GSO segment length is exceeding the dst MTU. + /* Slowpath - GSO segment length exceeds the egress MTU. * - * This can happen in two cases: - * 1) TCP GRO packet, DF bit not set - * 2) skb arrived via virtio-net, we thus get TSO/GSO skbs directly - * from host network stack. + * This can happen in several cases: + * - Forwarding of a TCP GRO skb, when DF flag is not set. + * - Forwarding of an skb that arrived on a virtualization interface + * (virtio-net/vhost/tap) with TSO/GSO size set by other network + * stack. + * - Local GSO skb transmitted on an NETIF_F_TSO tunnel stacked over an + * interface with a smaller MTU. + * - Arriving GRO skb (or GSO skb in a virtualized environment) that is + * bridged to a NETIF_F_TSO tunnel stacked over an interface with an + * insufficent MTU. */ features = netif_skb_features(skb); BUILD_BUG_ON(sizeof(*IPCB(skb)) > SKB_SGO_CB_OFFSET); From 31a3a7b5b26f75fbe82de10ca99f2b673f6c26b4 Mon Sep 17 00:00:00 2001 From: Shawn Lin Date: Thu, 10 Nov 2016 11:14:37 -0600 Subject: [PATCH 505/792] PCI: rockchip: Add three new resets as required properties pm_rst, aclk_rst, pclk_rst was controlled by ROM code so the software wasn't needed to control it again in theory. But it didn't work properly, so we do need to do it again and add enough delay between the assert of pm_rst and the deassert of pm_rst. The Soc intergrated with this controller, rk3399, is still under MP test internally, so the backward compatibility won't be a big deal. Signed-off-by: Shawn Lin Signed-off-by: Bjorn Helgaas Reviewed-by: Heiko Stuebner Acked-by: Rob Herring --- .../devicetree/bindings/pci/rockchip-pcie.txt | 11 +++- drivers/pci/host/pcie-rockchip.c | 62 +++++++++++++++++++ 2 files changed, 70 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/pci/rockchip-pcie.txt b/Documentation/devicetree/bindings/pci/rockchip-pcie.txt index ba67b39939c1..71aeda1ca055 100644 --- a/Documentation/devicetree/bindings/pci/rockchip-pcie.txt +++ b/Documentation/devicetree/bindings/pci/rockchip-pcie.txt @@ -26,13 +26,16 @@ Required properties: - "sys" - "legacy" - "client" -- resets: Must contain five entries for each entry in reset-names. +- resets: Must contain seven entries for each entry in reset-names. See ../reset/reset.txt for details. - reset-names: Must include the following names - "core" - "mgmt" - "mgmt-sticky" - "pipe" + - "pm" + - "aclk" + - "pclk" - pinctrl-names : The pin control state names - pinctrl-0: The "default" pinctrl state - #interrupt-cells: specifies the number of cells needed to encode an @@ -86,8 +89,10 @@ pcie0: pcie@f8000000 { reg = <0x0 0xf8000000 0x0 0x2000000>, <0x0 0xfd000000 0x0 0x1000000>; reg-names = "axi-base", "apb-base"; resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>, - <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>; - reset-names = "core", "mgmt", "mgmt-sticky", "pipe"; + <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE> , + <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, <&cru SRST_A_PCIE>; + reset-names = "core", "mgmt", "mgmt-sticky", "pipe", + "pm", "pclk", "aclk"; phys = <&pcie_phy>; phy-names = "pcie-phy"; pinctrl-names = "default"; diff --git a/drivers/pci/host/pcie-rockchip.c b/drivers/pci/host/pcie-rockchip.c index e0b22dab9b7a..e04f69beb42d 100644 --- a/drivers/pci/host/pcie-rockchip.c +++ b/drivers/pci/host/pcie-rockchip.c @@ -190,6 +190,9 @@ struct rockchip_pcie { struct reset_control *mgmt_rst; struct reset_control *mgmt_sticky_rst; struct reset_control *pipe_rst; + struct reset_control *pm_rst; + struct reset_control *aclk_rst; + struct reset_control *pclk_rst; struct clk *aclk_pcie; struct clk *aclk_perf_pcie; struct clk *hclk_pcie; @@ -408,6 +411,44 @@ static int rockchip_pcie_init_port(struct rockchip_pcie *rockchip) gpiod_set_value(rockchip->ep_gpio, 0); + err = reset_control_assert(rockchip->aclk_rst); + if (err) { + dev_err(dev, "assert aclk_rst err %d\n", err); + return err; + } + + err = reset_control_assert(rockchip->pclk_rst); + if (err) { + dev_err(dev, "assert pclk_rst err %d\n", err); + return err; + } + + err = reset_control_assert(rockchip->pm_rst); + if (err) { + dev_err(dev, "assert pm_rst err %d\n", err); + return err; + } + + udelay(10); + + err = reset_control_deassert(rockchip->pm_rst); + if (err) { + dev_err(dev, "deassert pm_rst err %d\n", err); + return err; + } + + err = reset_control_deassert(rockchip->aclk_rst); + if (err) { + dev_err(dev, "deassert mgmt_sticky_rst err %d\n", err); + return err; + } + + err = reset_control_deassert(rockchip->pclk_rst); + if (err) { + dev_err(dev, "deassert mgmt_sticky_rst err %d\n", err); + return err; + } + err = phy_init(rockchip->phy); if (err < 0) { dev_err(dev, "fail to init phy, err %d\n", err); @@ -781,6 +822,27 @@ static int rockchip_pcie_parse_dt(struct rockchip_pcie *rockchip) return PTR_ERR(rockchip->pipe_rst); } + rockchip->pm_rst = devm_reset_control_get(dev, "pm"); + if (IS_ERR(rockchip->pm_rst)) { + if (PTR_ERR(rockchip->pm_rst) != -EPROBE_DEFER) + dev_err(dev, "missing pm reset property in node\n"); + return PTR_ERR(rockchip->pm_rst); + } + + rockchip->pclk_rst = devm_reset_control_get(dev, "pclk"); + if (IS_ERR(rockchip->pclk_rst)) { + if (PTR_ERR(rockchip->pclk_rst) != -EPROBE_DEFER) + dev_err(dev, "missing pclk reset property in node\n"); + return PTR_ERR(rockchip->pclk_rst); + } + + rockchip->aclk_rst = devm_reset_control_get(dev, "aclk"); + if (IS_ERR(rockchip->aclk_rst)) { + if (PTR_ERR(rockchip->aclk_rst) != -EPROBE_DEFER) + dev_err(dev, "missing aclk reset property in node\n"); + return PTR_ERR(rockchip->aclk_rst); + } + rockchip->ep_gpio = devm_gpiod_get(dev, "ep", GPIOD_OUT_HIGH); if (IS_ERR(rockchip->ep_gpio)) { dev_err(dev, "missing ep-gpios property in node\n"); From 4d3222f7071c01104b43300f1c10b55723df8f68 Mon Sep 17 00:00:00 2001 From: Shawn Lin Date: Thu, 10 Nov 2016 11:14:46 -0600 Subject: [PATCH 506/792] arm64: dts: rockchip: add three new resets for rk3399 PCIe controller pm_rst, aclk_rst and pclk_rst should be controlled by driver, so we need to add these three resets for PCIe controller. Signed-off-by: Shawn Lin Signed-off-by: Bjorn Helgaas Acked-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3399.dtsi | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index b65c193dc64e..7afbfb0f96a3 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -300,8 +300,11 @@ ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x600000 0x81000000 0x0 0xfa600000 0x0 0xfa600000 0x0 0x100000>; resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>, - <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>; - reset-names = "core", "mgmt", "mgmt-sticky", "pipe"; + <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>, + <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, + <&cru SRST_A_PCIE>; + reset-names = "core", "mgmt", "mgmt-sticky", "pipe", + "pm", "pclk", "aclk"; status = "disabled"; pcie0_intc: interrupt-controller { From 8d1d8fcb21cfc4a65731760c3100920f929e8f3d Mon Sep 17 00:00:00 2001 From: Ram Amrani Date: Wed, 9 Nov 2016 22:48:43 +0200 Subject: [PATCH 507/792] qed: configure ll2 RoCE v1/v2 flavor correctly Currently RoCE v2 won't operate with RDMA CM due to missing setting of the roce-flavour in the ll2 configuration. This patch properly sets the flavour, and deletes incorrect HSI that doesn't [yet] exist. Fixes: abd49676c707 ("qed: Add RoCE ll2 & GSI support") Signed-off-by: Ram Amrani Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_hsi.h | 3 --- drivers/net/ethernet/qlogic/qed/qed_ll2.c | 1 + 2 files changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_hsi.h b/drivers/net/ethernet/qlogic/qed/qed_hsi.h index 72eee29c677f..2777d5bb4380 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_hsi.h +++ b/drivers/net/ethernet/qlogic/qed/qed_hsi.h @@ -727,9 +727,6 @@ struct core_tx_bd_flags { #define CORE_TX_BD_FLAGS_L4_PROTOCOL_SHIFT 6 #define CORE_TX_BD_FLAGS_L4_PSEUDO_CSUM_MODE_MASK 0x1 #define CORE_TX_BD_FLAGS_L4_PSEUDO_CSUM_MODE_SHIFT 7 -#define CORE_TX_BD_FLAGS_ROCE_FLAV_MASK 0x1 -#define CORE_TX_BD_FLAGS_ROCE_FLAV_SHIFT 12 - }; struct core_tx_bd { diff --git a/drivers/net/ethernet/qlogic/qed/qed_ll2.c b/drivers/net/ethernet/qlogic/qed/qed_ll2.c index 63e1a1b0ef8e..f95385cbbd40 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_ll2.c +++ b/drivers/net/ethernet/qlogic/qed/qed_ll2.c @@ -1119,6 +1119,7 @@ static void qed_ll2_prepare_tx_packet_set_bd(struct qed_hwfn *p_hwfn, start_bd->bd_flags.as_bitfield |= CORE_TX_BD_FLAGS_START_BD_MASK << CORE_TX_BD_FLAGS_START_BD_SHIFT; SET_FIELD(start_bd->bitfield0, CORE_TX_BD_NBDS, num_of_bds); + SET_FIELD(start_bd->bitfield0, CORE_TX_BD_ROCE_FLAV, type); DMA_REGPAIR_LE(start_bd->addr, first_frag); start_bd->nbytes = cpu_to_le16(first_frag_len); From 5c5f26090840951b4102d9a1e6db9aac41101e5a Mon Sep 17 00:00:00 2001 From: Ram Amrani Date: Wed, 9 Nov 2016 22:48:44 +0200 Subject: [PATCH 508/792] qed: Correct rdma params configuration Previous fix has broken RoCE support as the rdma_pf_params are now being set into the parameters only after the params are alrady assigned into the hw-function. Fixes: 0189efb8f4f8 ("qed*: Fix Kconfig dependencies with INFINIBAND_QEDR") Signed-off-by: Ram Amrani Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_main.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_main.c b/drivers/net/ethernet/qlogic/qed/qed_main.c index c418360ba02a..333c7442e48a 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_main.c +++ b/drivers/net/ethernet/qlogic/qed/qed_main.c @@ -839,20 +839,19 @@ static void qed_update_pf_params(struct qed_dev *cdev, { int i; + if (IS_ENABLED(CONFIG_QED_RDMA)) { + params->rdma_pf_params.num_qps = QED_ROCE_QPS; + params->rdma_pf_params.min_dpis = QED_ROCE_DPIS; + /* divide by 3 the MRs to avoid MF ILT overflow */ + params->rdma_pf_params.num_mrs = RDMA_MAX_TIDS; + params->rdma_pf_params.gl_pi = QED_ROCE_PROTOCOL_INDEX; + } + for (i = 0; i < cdev->num_hwfns; i++) { struct qed_hwfn *p_hwfn = &cdev->hwfns[i]; p_hwfn->pf_params = *params; } - - if (!IS_ENABLED(CONFIG_QED_RDMA)) - return; - - params->rdma_pf_params.num_qps = QED_ROCE_QPS; - params->rdma_pf_params.min_dpis = QED_ROCE_DPIS; - /* divide by 3 the MRs to avoid MF ILT overflow */ - params->rdma_pf_params.num_mrs = RDMA_MAX_TIDS; - params->rdma_pf_params.gl_pi = QED_ROCE_PROTOCOL_INDEX; } static int qed_slowpath_start(struct qed_dev *cdev, From 33b1341cd1bf5c89e7ef332aa8ac3ed614a3d942 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Thu, 10 Nov 2016 12:31:04 +0100 Subject: [PATCH 509/792] mlxsw: spectrum_router: Fix handling of neighbour structure __neigh_create function works in a different way than assumed. It passes "n" as a parameter to ndo_neigh_construct. But this "n" might be destroyed right away before __neigh_create() returns in case there is already another neighbour struct in the hashtable with the same dev and primary key. That is not expected by mlxsw_sp_router_neigh_construct() and the stored "n" points to freed memory, eventually leading to crash. Fix this by doing tight 1:1 coupling between neighbour struct and internal driver neigh_entry. That allows to narrow down the key in internal driver hashtable to do lookups by "n" only. Fixes: 6cf3c971dc84 ("mlxsw: spectrum_router: Add private neigh table") Signed-off-by: Jiri Pirko Acked-by: Ido Schimmel Signed-off-by: David S. Miller --- .../ethernet/mellanox/mlxsw/spectrum_router.c | 95 +++++++------------ 1 file changed, 34 insertions(+), 61 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c index 4573da2c5560..28630129065d 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c @@ -600,15 +600,13 @@ static void mlxsw_sp_vrs_fini(struct mlxsw_sp *mlxsw_sp) } struct mlxsw_sp_neigh_key { - unsigned char addr[sizeof(struct in6_addr)]; - struct net_device *dev; + struct neighbour *n; }; struct mlxsw_sp_neigh_entry { struct rhash_head ht_node; struct mlxsw_sp_neigh_key key; u16 rif; - struct neighbour *n; bool offloaded; struct delayed_work dw; struct mlxsw_sp_port *mlxsw_sp_port; @@ -646,19 +644,15 @@ mlxsw_sp_neigh_entry_remove(struct mlxsw_sp *mlxsw_sp, static void mlxsw_sp_router_neigh_update_hw(struct work_struct *work); static struct mlxsw_sp_neigh_entry * -mlxsw_sp_neigh_entry_create(const void *addr, size_t addr_len, - struct net_device *dev, u16 rif, - struct neighbour *n) +mlxsw_sp_neigh_entry_create(struct neighbour *n, u16 rif) { struct mlxsw_sp_neigh_entry *neigh_entry; neigh_entry = kzalloc(sizeof(*neigh_entry), GFP_ATOMIC); if (!neigh_entry) return NULL; - memcpy(neigh_entry->key.addr, addr, addr_len); - neigh_entry->key.dev = dev; + neigh_entry->key.n = n; neigh_entry->rif = rif; - neigh_entry->n = n; INIT_DELAYED_WORK(&neigh_entry->dw, mlxsw_sp_router_neigh_update_hw); INIT_LIST_HEAD(&neigh_entry->nexthop_list); return neigh_entry; @@ -671,13 +665,11 @@ mlxsw_sp_neigh_entry_destroy(struct mlxsw_sp_neigh_entry *neigh_entry) } static struct mlxsw_sp_neigh_entry * -mlxsw_sp_neigh_entry_lookup(struct mlxsw_sp *mlxsw_sp, const void *addr, - size_t addr_len, struct net_device *dev) +mlxsw_sp_neigh_entry_lookup(struct mlxsw_sp *mlxsw_sp, struct neighbour *n) { - struct mlxsw_sp_neigh_key key = {{ 0 } }; + struct mlxsw_sp_neigh_key key; - memcpy(key.addr, addr, addr_len); - key.dev = dev; + key.n = n; return rhashtable_lookup_fast(&mlxsw_sp->router.neigh_ht, &key, mlxsw_sp_neigh_ht_params); } @@ -689,26 +681,20 @@ int mlxsw_sp_router_neigh_construct(struct net_device *dev, struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp; struct mlxsw_sp_neigh_entry *neigh_entry; struct mlxsw_sp_rif *r; - u32 dip; int err; if (n->tbl != &arp_tbl) return 0; - dip = ntohl(*((__be32 *) n->primary_key)); - neigh_entry = mlxsw_sp_neigh_entry_lookup(mlxsw_sp, &dip, sizeof(dip), - n->dev); - if (neigh_entry) { - WARN_ON(neigh_entry->n != n); + neigh_entry = mlxsw_sp_neigh_entry_lookup(mlxsw_sp, n); + if (neigh_entry) return 0; - } r = mlxsw_sp_rif_find_by_dev(mlxsw_sp, n->dev); if (WARN_ON(!r)) return -EINVAL; - neigh_entry = mlxsw_sp_neigh_entry_create(&dip, sizeof(dip), n->dev, - r->rif, n); + neigh_entry = mlxsw_sp_neigh_entry_create(n, r->rif); if (!neigh_entry) return -ENOMEM; err = mlxsw_sp_neigh_entry_insert(mlxsw_sp, neigh_entry); @@ -727,14 +713,11 @@ void mlxsw_sp_router_neigh_destroy(struct net_device *dev, struct mlxsw_sp_port *mlxsw_sp_port = netdev_priv(dev); struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp; struct mlxsw_sp_neigh_entry *neigh_entry; - u32 dip; if (n->tbl != &arp_tbl) return; - dip = ntohl(*((__be32 *) n->primary_key)); - neigh_entry = mlxsw_sp_neigh_entry_lookup(mlxsw_sp, &dip, sizeof(dip), - n->dev); + neigh_entry = mlxsw_sp_neigh_entry_lookup(mlxsw_sp, n); if (!neigh_entry) return; mlxsw_sp_neigh_entry_remove(mlxsw_sp, neigh_entry); @@ -862,7 +845,7 @@ static void mlxsw_sp_router_neighs_update_nh(struct mlxsw_sp *mlxsw_sp) * is active regardless of the traffic. */ if (!list_empty(&neigh_entry->nexthop_list)) - neigh_event_send(neigh_entry->n, NULL); + neigh_event_send(neigh_entry->key.n, NULL); } rtnl_unlock(); } @@ -908,9 +891,9 @@ static void mlxsw_sp_router_probe_unresolved_nexthops(struct work_struct *work) rtnl_lock(); list_for_each_entry(neigh_entry, &mlxsw_sp->router.nexthop_neighs_list, nexthop_neighs_list_node) { - if (!(neigh_entry->n->nud_state & NUD_VALID) && + if (!(neigh_entry->key.n->nud_state & NUD_VALID) && !list_empty(&neigh_entry->nexthop_list)) - neigh_event_send(neigh_entry->n, NULL); + neigh_event_send(neigh_entry->key.n, NULL); } rtnl_unlock(); @@ -927,7 +910,7 @@ static void mlxsw_sp_router_neigh_update_hw(struct work_struct *work) { struct mlxsw_sp_neigh_entry *neigh_entry = container_of(work, struct mlxsw_sp_neigh_entry, dw.work); - struct neighbour *n = neigh_entry->n; + struct neighbour *n = neigh_entry->key.n; struct mlxsw_sp_port *mlxsw_sp_port = neigh_entry->mlxsw_sp_port; struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp; char rauht_pl[MLXSW_REG_RAUHT_LEN]; @@ -1030,11 +1013,8 @@ int mlxsw_sp_router_netevent_event(struct notifier_block *unused, mlxsw_sp = mlxsw_sp_port->mlxsw_sp; dip = ntohl(*((__be32 *) n->primary_key)); - neigh_entry = mlxsw_sp_neigh_entry_lookup(mlxsw_sp, - &dip, - sizeof(__be32), - dev); - if (WARN_ON(!neigh_entry) || WARN_ON(neigh_entry->n != n)) { + neigh_entry = mlxsw_sp_neigh_entry_lookup(mlxsw_sp, n); + if (WARN_ON(!neigh_entry)) { mlxsw_sp_port_dev_put(mlxsw_sp_port); return NOTIFY_DONE; } @@ -1343,33 +1323,26 @@ static int mlxsw_sp_nexthop_init(struct mlxsw_sp *mlxsw_sp, struct fib_nh *fib_nh) { struct mlxsw_sp_neigh_entry *neigh_entry; - u32 gwip = ntohl(fib_nh->nh_gw); struct net_device *dev = fib_nh->nh_dev; struct neighbour *n; u8 nud_state; - neigh_entry = mlxsw_sp_neigh_entry_lookup(mlxsw_sp, &gwip, - sizeof(gwip), dev); - if (!neigh_entry) { - __be32 gwipn = htonl(gwip); - - n = neigh_create(&arp_tbl, &gwipn, dev); + /* Take a reference of neigh here ensuring that neigh would + * not be detructed before the nexthop entry is finished. + * The reference is taken either in neigh_lookup() or + * in neith_create() in case n is not found. + */ + n = neigh_lookup(&arp_tbl, &fib_nh->nh_gw, dev); + if (!n) { + n = neigh_create(&arp_tbl, &fib_nh->nh_gw, dev); if (IS_ERR(n)) return PTR_ERR(n); neigh_event_send(n, NULL); - neigh_entry = mlxsw_sp_neigh_entry_lookup(mlxsw_sp, &gwip, - sizeof(gwip), dev); - if (!neigh_entry) { - neigh_release(n); - return -EINVAL; - } - } else { - /* Take a reference of neigh here ensuring that neigh would - * not be detructed before the nexthop entry is finished. - * The second branch takes the reference in neith_create() - */ - n = neigh_entry->n; - neigh_clone(n); + } + neigh_entry = mlxsw_sp_neigh_entry_lookup(mlxsw_sp, n); + if (!neigh_entry) { + neigh_release(n); + return -EINVAL; } /* If that is the first nexthop connected to that neigh, add to @@ -1403,7 +1376,7 @@ static void mlxsw_sp_nexthop_fini(struct mlxsw_sp *mlxsw_sp, if (list_empty(&nh->neigh_entry->nexthop_list)) list_del(&nh->neigh_entry->nexthop_neighs_list_node); - neigh_release(neigh_entry->n); + neigh_release(neigh_entry->key.n); } static struct mlxsw_sp_nexthop_group * @@ -1463,11 +1436,11 @@ static bool mlxsw_sp_nexthop_match(struct mlxsw_sp_nexthop *nh, for (i = 0; i < fi->fib_nhs; i++) { struct fib_nh *fib_nh = &fi->fib_nh[i]; - u32 gwip = ntohl(fib_nh->nh_gw); + struct neighbour *n = nh->neigh_entry->key.n; - if (memcmp(nh->neigh_entry->key.addr, - &gwip, sizeof(u32)) == 0 && - nh->neigh_entry->key.dev == fib_nh->nh_dev) + if (memcmp(n->primary_key, &fib_nh->nh_gw, + sizeof(fib_nh->nh_gw)) == 0 && + n->dev == fib_nh->nh_dev) return true; } return false; From 0e3715c9c250747280b1757ea267c577e7591e31 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Thu, 10 Nov 2016 12:31:05 +0100 Subject: [PATCH 510/792] mlxsw: spectrum_router: Ignore FIB notification events for non-init namespaces Since now, the table with same id in multiple netnamespaces were squashed to a single virtual router. That is not only incorrect, it also causes error messages when trying to use RALUE register to do double remove of FIB entries, like this one: mlxsw_spectrum 0000:03:00.0: EMAD reg access failed (tid=facb831c00007b20,reg_id=8013(ralue),type=write,status=7(bad parameter)) Since we don't allow ports to change namespaces (NETIF_F_NETNS_LOCAL), and the infrastructure is not yet prepared to handle netnamespaces, just ignore FIB notification events for non-init namespaces. That is clear to do since we don't need to offload them. Fixes: b45f64d16d45 ("mlxsw: spectrum_router: Use FIB notifications instead of switchdev calls") Signed-off-by: Jiri Pirko Acked-by: Ido Schimmel Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c index 28630129065d..040737e14a3f 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c @@ -1931,6 +1931,9 @@ static int mlxsw_sp_router_fib_event(struct notifier_block *nb, struct fib_entry_notifier_info *fen_info = ptr; int err; + if (!net_eq(fen_info->info.net, &init_net)) + return NOTIFY_DONE; + switch (event) { case FIB_EVENT_ENTRY_ADD: err = mlxsw_sp_router_fib4_add(mlxsw_sp, fen_info); From 954e6bee03fea509a85aea4cbf45307fe4e3b43e Mon Sep 17 00:00:00 2001 From: Rex Zhu Date: Thu, 10 Nov 2016 14:07:34 +0800 Subject: [PATCH 511/792] drm/amd/powerplay: implement get_clock_by_type for iceland. iceland use pptable v0. bugs: https://bugzilla.kernel.org/show_bug.cgi?id=185681 https://bugs.freedesktop.org/show_bug.cgi?id=98357 Reviewed-by: Alex Deucher Signed-off-by: Rex Zhu Signed-off-by: Alex Deucher --- .../gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c | 51 ++++++++++++------- 1 file changed, 33 insertions(+), 18 deletions(-) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c index f41cddf2a16b..b0c929dd8beb 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c @@ -4233,18 +4233,26 @@ static int smu7_get_sclks(struct pp_hwmgr *hwmgr, struct amd_pp_clocks *clocks) { struct phm_ppt_v1_information *table_info = (struct phm_ppt_v1_information *)hwmgr->pptable; - struct phm_ppt_v1_clock_voltage_dependency_table *dep_sclk_table; + struct phm_ppt_v1_clock_voltage_dependency_table *dep_sclk_table = NULL; + struct phm_clock_voltage_dependency_table *sclk_table; int i; - if (table_info == NULL) - return -EINVAL; - - dep_sclk_table = table_info->vdd_dep_on_sclk; - - for (i = 0; i < dep_sclk_table->count; i++) { - clocks->clock[i] = dep_sclk_table->entries[i].clk; - clocks->count++; + if (hwmgr->pp_table_version == PP_TABLE_V1) { + if (table_info == NULL || table_info->vdd_dep_on_sclk == NULL) + return -EINVAL; + dep_sclk_table = table_info->vdd_dep_on_sclk; + for (i = 0; i < dep_sclk_table->count; i++) { + clocks->clock[i] = dep_sclk_table->entries[i].clk; + clocks->count++; + } + } else if (hwmgr->pp_table_version == PP_TABLE_V0) { + sclk_table = hwmgr->dyn_state.vddc_dependency_on_sclk; + for (i = 0; i < sclk_table->count; i++) { + clocks->clock[i] = sclk_table->entries[i].clk; + clocks->count++; + } } + return 0; } @@ -4266,17 +4274,24 @@ static int smu7_get_mclks(struct pp_hwmgr *hwmgr, struct amd_pp_clocks *clocks) (struct phm_ppt_v1_information *)hwmgr->pptable; struct phm_ppt_v1_clock_voltage_dependency_table *dep_mclk_table; int i; + struct phm_clock_voltage_dependency_table *mclk_table; - if (table_info == NULL) - return -EINVAL; - - dep_mclk_table = table_info->vdd_dep_on_mclk; - - for (i = 0; i < dep_mclk_table->count; i++) { - clocks->clock[i] = dep_mclk_table->entries[i].clk; - clocks->latency[i] = smu7_get_mem_latency(hwmgr, + if (hwmgr->pp_table_version == PP_TABLE_V1) { + if (table_info == NULL) + return -EINVAL; + dep_mclk_table = table_info->vdd_dep_on_mclk; + for (i = 0; i < dep_mclk_table->count; i++) { + clocks->clock[i] = dep_mclk_table->entries[i].clk; + clocks->latency[i] = smu7_get_mem_latency(hwmgr, dep_mclk_table->entries[i].clk); - clocks->count++; + clocks->count++; + } + } else if (hwmgr->pp_table_version == PP_TABLE_V0) { + mclk_table = hwmgr->dyn_state.vddc_dependency_on_mclk; + for (i = 0; i < mclk_table->count; i++) { + clocks->clock[i] = mclk_table->entries[i].clk; + clocks->count++; + } } return 0; } From 8a8d56176635515d607c520580c73d61f300b409 Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Wed, 9 Nov 2016 16:47:54 +0800 Subject: [PATCH 512/792] ceph: use default file splice read callback Splice read/write implementation changed recently. When using generic_file_splice_read(), iov_iter with type == ITER_PIPE is passed to filesystem's read_iter callback. But ceph_sync_read() can't serve ITER_PIPE iov_iter correctly (ITER_PIPE iov_iter expects pages from page cache). Fixing ceph_sync_read() requires a big patch. So use default splice read callback for now. Signed-off-by: Yan, Zheng Signed-off-by: Ilya Dryomov --- fs/ceph/file.c | 1 - 1 file changed, 1 deletion(-) diff --git a/fs/ceph/file.c b/fs/ceph/file.c index 18630e800208..f995e3528a33 100644 --- a/fs/ceph/file.c +++ b/fs/ceph/file.c @@ -1770,7 +1770,6 @@ const struct file_operations ceph_file_fops = { .fsync = ceph_fsync, .lock = ceph_lock, .flock = ceph_flock, - .splice_read = generic_file_splice_read, .splice_write = iter_file_splice_write, .unlocked_ioctl = ceph_ioctl, .compat_ioctl = ceph_ioctl, From 3890dce1d3a8b9fe3bc36de99496792e468cd079 Mon Sep 17 00:00:00 2001 From: "Yan, Zheng" Date: Wed, 9 Nov 2016 16:42:48 +0800 Subject: [PATCH 513/792] libceph: fix legacy layout decode with pool 0 If your data pool was pool 0, ceph_file_layout_from_legacy() transform that to -1 unconditionally, which broke upgrades. We only want do that for a fully zeroed ceph_file_layout, so that it still maps to a file_layout_t. If any fields are set, though, we trust the fl_pgpool to be a valid pool. Fixes: 7627151ea30bc ("libceph: define new ceph_file_layout structure") Link: http://tracker.ceph.com/issues/17825 Signed-off-by: Yan, Zheng Signed-off-by: Ilya Dryomov --- net/ceph/ceph_fs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/ceph/ceph_fs.c b/net/ceph/ceph_fs.c index 7d54e944de5e..dcbe67ff3e2b 100644 --- a/net/ceph/ceph_fs.c +++ b/net/ceph/ceph_fs.c @@ -34,7 +34,8 @@ void ceph_file_layout_from_legacy(struct ceph_file_layout *fl, fl->stripe_count = le32_to_cpu(legacy->fl_stripe_count); fl->object_size = le32_to_cpu(legacy->fl_object_size); fl->pool_id = le32_to_cpu(legacy->fl_pg_pool); - if (fl->pool_id == 0) + if (fl->pool_id == 0 && fl->stripe_unit == 0 && + fl->stripe_count == 0 && fl->object_size == 0) fl->pool_id = -1; } EXPORT_SYMBOL(ceph_file_layout_from_legacy); From 264048afab27d7c27eedf5394714e0b396d787f7 Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Tue, 8 Nov 2016 15:15:24 +0100 Subject: [PATCH 514/792] libceph: initialize last_linger_id with a large integer osdc->last_linger_id is a counter for lreq->linger_id, which is used for watch cookies. Starting with a large integer should ease the task of telling apart kernel and userspace clients. Signed-off-by: Ilya Dryomov --- include/linux/ceph/osd_client.h | 2 ++ net/ceph/osd_client.c | 1 + 2 files changed, 3 insertions(+) diff --git a/include/linux/ceph/osd_client.h b/include/linux/ceph/osd_client.h index 96337b15a60d..a8e66344bacc 100644 --- a/include/linux/ceph/osd_client.h +++ b/include/linux/ceph/osd_client.h @@ -258,6 +258,8 @@ struct ceph_watch_item { struct ceph_entity_addr addr; }; +#define CEPH_LINGER_ID_START 0xffff000000000000ULL + struct ceph_osd_client { struct ceph_client *client; diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c index d9bf7a1d0a58..e6ae15bc41b7 100644 --- a/net/ceph/osd_client.c +++ b/net/ceph/osd_client.c @@ -4094,6 +4094,7 @@ int ceph_osdc_init(struct ceph_osd_client *osdc, struct ceph_client *client) osd_init(&osdc->homeless_osd); osdc->homeless_osd.o_osdc = osdc; osdc->homeless_osd.o_osd = CEPH_HOMELESS_OSD; + osdc->last_linger_id = CEPH_LINGER_ID_START; osdc->linger_requests = RB_ROOT; osdc->map_checks = RB_ROOT; osdc->linger_map_checks = RB_ROOT; From d052db11c153cfb469f13a4121966f30ecb57c66 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 6 Nov 2016 21:20:32 +0100 Subject: [PATCH 515/792] i2c: mux: demux-pinctrl: make drivers with no pinctrl work again Some drivers like i2c-gpio do not have dedicated pinctrl states. They broke when error checking for pinctrl was added. Detect them now, and in their case, simply skip over pinctrl configuration. Signed-off-by: Wolfram Sang Signed-off-by: Wolfram Sang --- drivers/i2c/muxes/i2c-demux-pinctrl.c | 22 ++++++++++++++++++++-- 1 file changed, 20 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/muxes/i2c-demux-pinctrl.c b/drivers/i2c/muxes/i2c-demux-pinctrl.c index b3893f6282ba..3e6fe1760d82 100644 --- a/drivers/i2c/muxes/i2c-demux-pinctrl.c +++ b/drivers/i2c/muxes/i2c-demux-pinctrl.c @@ -69,10 +69,28 @@ static int i2c_demux_activate_master(struct i2c_demux_pinctrl_priv *priv, u32 ne goto err_with_revert; } - p = devm_pinctrl_get_select(adap->dev.parent, priv->bus_name); + /* + * Check if there are pinctrl states at all. Note: we cant' use + * devm_pinctrl_get_select() because we need to distinguish between + * the -ENODEV from devm_pinctrl_get() and pinctrl_lookup_state(). + */ + p = devm_pinctrl_get(adap->dev.parent); if (IS_ERR(p)) { ret = PTR_ERR(p); - goto err_with_put; + /* continue if just no pinctrl states (e.g. i2c-gpio), otherwise exit */ + if (ret != -ENODEV) + goto err_with_put; + } else { + /* there are states. check and use them */ + struct pinctrl_state *s = pinctrl_lookup_state(p, priv->bus_name); + + if (IS_ERR(s)) { + ret = PTR_ERR(s); + goto err_with_put; + } + ret = pinctrl_select_state(p, s); + if (ret < 0) + goto err_with_put; } priv->chan[new_chan].parent_adap = adap; From f10a59eb8c1087f0ce03cf0392cd483922187066 Mon Sep 17 00:00:00 2001 From: Peter Rosin Date: Thu, 10 Nov 2016 15:03:21 +0100 Subject: [PATCH 516/792] i2c: Documentation: i2c-topology: fix minor whitespace nit Signed-off-by: Peter Rosin Signed-off-by: Wolfram Sang --- Documentation/i2c/i2c-topology | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/i2c/i2c-topology b/Documentation/i2c/i2c-topology index e0aefeece551..1a014fede0b7 100644 --- a/Documentation/i2c/i2c-topology +++ b/Documentation/i2c/i2c-topology @@ -326,7 +326,7 @@ Two parent-locked sibling muxes This is a good topology. - .--------. + .--------. .----------. .--| dev D1 | | parent- |--' '--------' .--| locked | .--------. @@ -350,7 +350,7 @@ Mux-locked and parent-locked sibling muxes This is a good topology. - .--------. + .--------. .----------. .--| dev D1 | | mux- |--' '--------' .--| locked | .--------. From bc79c9851a76d76f269d9ef5150e180825650b67 Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Thu, 10 Nov 2016 16:10:44 -0500 Subject: [PATCH 517/792] PCI: VMD: Update filename to reflect move Updating MAINTAINERS to reflect the new location of the VMD driver. Signed-off-by: Keith Busch Signed-off-by: Bjorn Helgaas --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 906e96948520..aefa6bf1782e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9318,7 +9318,7 @@ PCI DRIVER FOR INTEL VOLUME MANAGEMENT DEVICE (VMD) M: Keith Busch L: linux-pci@vger.kernel.org S: Supported -F: arch/x86/pci/vmd.c +F: drivers/pci/host/vmd.c PCIE DRIVER FOR ST SPEAR13XX M: Pratyush Anand From e5581fe2b4f40e54bfea9a1eee1bc487da52e98c Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 8 Nov 2016 16:38:00 +1000 Subject: [PATCH 518/792] drm/udl: make control msg static const. (v2) Thou shall not send control msg from the stack, does that mean I can send it from the RO memory area? and it looks like the answer is no, so here's v2 which kmemdups. Reported-by: poma Tested-by: poma Signed-off-by: Dave Airlie --- drivers/gpu/drm/udl/udl_main.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/udl/udl_main.c b/drivers/gpu/drm/udl/udl_main.c index 29f0207fa677..873f010d9616 100644 --- a/drivers/gpu/drm/udl/udl_main.c +++ b/drivers/gpu/drm/udl/udl_main.c @@ -98,17 +98,23 @@ success: static int udl_select_std_channel(struct udl_device *udl) { int ret; - u8 set_def_chn[] = {0x57, 0xCD, 0xDC, 0xA7, - 0x1C, 0x88, 0x5E, 0x15, - 0x60, 0xFE, 0xC6, 0x97, - 0x16, 0x3D, 0x47, 0xF2}; + static const u8 set_def_chn[] = {0x57, 0xCD, 0xDC, 0xA7, + 0x1C, 0x88, 0x5E, 0x15, + 0x60, 0xFE, 0xC6, 0x97, + 0x16, 0x3D, 0x47, 0xF2}; + void *sendbuf; + + sendbuf = kmemdup(set_def_chn, sizeof(set_def_chn), GFP_KERNEL); + if (!sendbuf) + return -ENOMEM; ret = usb_control_msg(udl->udev, usb_sndctrlpipe(udl->udev, 0), NR_USB_REQUEST_CHANNEL, (USB_DIR_OUT | USB_TYPE_VENDOR), 0, 0, - set_def_chn, sizeof(set_def_chn), + sendbuf, sizeof(set_def_chn), USB_CTRL_SET_TIMEOUT); + kfree(sendbuf); return ret < 0 ? ret : 0; } From e519e7774784f3fa7728657d780863805ed1c983 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 10 Nov 2016 18:32:13 -0500 Subject: [PATCH 519/792] splice: remove detritus from generic_file_splice_read() i_size check is a leftover from the horrors that used to play with the page cache in that function. With the switch to ->read_iter(), it's neither needed nor correct - for gfs2 it ends up being buggy, since i_size is not guaranteed to be correct until later (inside ->read_iter()). Spotted-by: Abhi Das Signed-off-by: Al Viro --- fs/splice.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/fs/splice.c b/fs/splice.c index 153d4f3bd441..dcaf185a5731 100644 --- a/fs/splice.c +++ b/fs/splice.c @@ -299,13 +299,8 @@ ssize_t generic_file_splice_read(struct file *in, loff_t *ppos, { struct iov_iter to; struct kiocb kiocb; - loff_t isize; int idx, ret; - isize = i_size_read(in->f_mapping->host); - if (unlikely(*ppos >= isize)) - return 0; - iov_iter_pipe(&to, ITER_PIPE | READ, pipe, len); idx = to.idx; init_sync_kiocb(&kiocb, in); From 6f75c3fd56daf547d684127a7f83c283c3c160d1 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Wed, 9 Nov 2016 17:21:08 -0800 Subject: [PATCH 520/792] PM / sleep: don't suspend parent when async child suspend_{noirq, late} fails Consider two devices, A and B, where B is a child of A, and B utilizes asynchronous suspend (it does not matter whether A is sync or async). If B fails to suspend_noirq() or suspend_late(), or is interrupted by a wakeup (pm_wakeup_pending()), then it aborts and sets the async_error variable. However, device A does not (immediately) check the async_error variable; it may continue to run its own suspend_noirq()/suspend_late() callback. This is bad. We can resolve this problem by doing our error and wakeup checking (particularly, for the async_error flag) after waiting for children to suspend, instead of before. This also helps align the logic for the noirq and late suspend cases with the logic in __device_suspend(). It's easy to observe this erroneous behavior by, for example, forcing a device to sleep a bit in its suspend_noirq() (to ensure the parent is waiting for the child to complete), then return an error, and watch the parent suspend_noirq() still get called. (Or similarly, fake a wakeup event at the right (or is it wrong?) time.) Fixes: de377b397272 (PM / sleep: Asynchronous threads for suspend_late) Fixes: 28b6fd6e3779 (PM / sleep: Asynchronous threads for suspend_noirq) Reported-by: Jeffy Chen Signed-off-by: Brian Norris Signed-off-by: Rafael J. Wysocki --- drivers/base/power/main.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c index e44944f4be77..2932a5bd892f 100644 --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -1027,6 +1027,8 @@ static int __device_suspend_noirq(struct device *dev, pm_message_t state, bool a TRACE_DEVICE(dev); TRACE_SUSPEND(0); + dpm_wait_for_children(dev, async); + if (async_error) goto Complete; @@ -1038,8 +1040,6 @@ static int __device_suspend_noirq(struct device *dev, pm_message_t state, bool a if (dev->power.syscore || dev->power.direct_complete) goto Complete; - dpm_wait_for_children(dev, async); - if (dev->pm_domain) { info = "noirq power domain "; callback = pm_noirq_op(&dev->pm_domain->ops, state); @@ -1174,6 +1174,8 @@ static int __device_suspend_late(struct device *dev, pm_message_t state, bool as __pm_runtime_disable(dev, false); + dpm_wait_for_children(dev, async); + if (async_error) goto Complete; @@ -1185,8 +1187,6 @@ static int __device_suspend_late(struct device *dev, pm_message_t state, bool as if (dev->power.syscore || dev->power.direct_complete) goto Complete; - dpm_wait_for_children(dev, async); - if (dev->pm_domain) { info = "late power domain "; callback = pm_late_early_op(&dev->pm_domain->ops, state); From 74a5ed5c4f692df2ff0a2313ea71e81243525519 Mon Sep 17 00:00:00 2001 From: Thomas Tai Date: Thu, 3 Nov 2016 09:19:01 -0700 Subject: [PATCH 521/792] sparc64: Fix find_node warning if numa node cannot be found When booting up LDOM, find_node() warns that a physical address doesn't match a NUMA node. WARNING: CPU: 0 PID: 0 at arch/sparc/mm/init_64.c:835 find_node+0xf4/0x120 find_node: A physical address doesn't match a NUMA node rule. Some physical memory will be owned by node 0.Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 4.9.0-rc3 #4 Call Trace: [0000000000468ba0] __warn+0xc0/0xe0 [0000000000468c74] warn_slowpath_fmt+0x34/0x60 [00000000004592f4] find_node+0xf4/0x120 [0000000000dd0774] add_node_ranges+0x38/0xe4 [0000000000dd0b1c] numa_parse_mdesc+0x268/0x2e4 [0000000000dd0e9c] bootmem_init+0xb8/0x160 [0000000000dd174c] paging_init+0x808/0x8fc [0000000000dcb0d0] setup_arch+0x2c8/0x2f0 [0000000000dc68a0] start_kernel+0x48/0x424 [0000000000dcb374] start_early_boot+0x27c/0x28c [0000000000a32c08] tlb_fixup_done+0x4c/0x64 [0000000000027f08] 0x27f08 It is because linux use an internal structure node_masks[] to keep the best memory latency node only. However, LDOM mdesc can contain single latency-group with multiple memory latency nodes. If the address doesn't match the best latency node within node_masks[], it should check for an alternative via mdesc. The warning message should only be printed if the address doesn't match any node_masks[] nor within mdesc. To minimize the impact of searching mdesc every time, the last matched mask and index is stored in a variable. Signed-off-by: Thomas Tai Reviewed-by: Chris Hyser Reviewed-by: Liam Merwick Signed-off-by: David S. Miller --- arch/sparc/mm/init_64.c | 65 ++++++++++++++++++++++++++++++++++++++--- 1 file changed, 61 insertions(+), 4 deletions(-) diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c index 439784b7b7ac..068eb3dcbcb5 100644 --- a/arch/sparc/mm/init_64.c +++ b/arch/sparc/mm/init_64.c @@ -802,6 +802,8 @@ struct mdesc_mblock { }; static struct mdesc_mblock *mblocks; static int num_mblocks; +static int find_numa_node_for_addr(unsigned long pa, + struct node_mem_mask *pnode_mask); static unsigned long ra_to_pa(unsigned long addr) { @@ -821,6 +823,9 @@ static unsigned long ra_to_pa(unsigned long addr) static int find_node(unsigned long addr) { + static bool search_mdesc = true; + static struct node_mem_mask last_mem_mask = { ~0UL, ~0UL }; + static int last_index; int i; addr = ra_to_pa(addr); @@ -830,10 +835,27 @@ static int find_node(unsigned long addr) if ((addr & p->mask) == p->val) return i; } - /* The following condition has been observed on LDOM guests.*/ - WARN_ONCE(1, "find_node: A physical address doesn't match a NUMA node" - " rule. Some physical memory will be owned by node 0."); - return 0; + /* The following condition has been observed on LDOM guests because + * node_masks only contains the best latency mask and value. + * LDOM guest's mdesc can contain a single latency group to + * cover multiple address range. Print warning message only if the + * address cannot be found in node_masks nor mdesc. + */ + if ((search_mdesc) && + ((addr & last_mem_mask.mask) != last_mem_mask.val)) { + /* find the available node in the mdesc */ + last_index = find_numa_node_for_addr(addr, &last_mem_mask); + numadbg("find_node: latency group for address 0x%lx is %d\n", + addr, last_index); + if ((last_index < 0) || (last_index >= num_node_masks)) { + /* WARN_ONCE() and use default group 0 */ + WARN_ONCE(1, "find_node: A physical address doesn't match a NUMA node rule. Some physical memory will be owned by node 0."); + search_mdesc = false; + last_index = 0; + } + } + + return last_index; } static u64 memblock_nid_range(u64 start, u64 end, int *nid) @@ -1160,6 +1182,41 @@ int __node_distance(int from, int to) return numa_latency[from][to]; } +static int find_numa_node_for_addr(unsigned long pa, + struct node_mem_mask *pnode_mask) +{ + struct mdesc_handle *md = mdesc_grab(); + u64 node, arc; + int i = 0; + + node = mdesc_node_by_name(md, MDESC_NODE_NULL, "latency-groups"); + if (node == MDESC_NODE_NULL) + goto out; + + mdesc_for_each_node_by_name(md, node, "group") { + mdesc_for_each_arc(arc, md, node, MDESC_ARC_TYPE_FWD) { + u64 target = mdesc_arc_target(md, arc); + struct mdesc_mlgroup *m = find_mlgroup(target); + + if (!m) + continue; + if ((pa & m->mask) == m->match) { + if (pnode_mask) { + pnode_mask->mask = m->mask; + pnode_mask->val = m->match; + } + mdesc_release(md); + return i; + } + } + i++; + } + +out: + mdesc_release(md); + return -1; +} + static int __init find_best_numa_node_for_mlgroup(struct mdesc_mlgroup *grp) { int i; From 07b5ab3f71d318e52c18cc3b73c1d44c908aacfa Mon Sep 17 00:00:00 2001 From: Andreas Larsson Date: Wed, 9 Nov 2016 10:43:05 +0100 Subject: [PATCH 522/792] sparc32: Fix inverted invalid_frame_pointer checks on sigreturns Signed-off-by: Andreas Larsson Signed-off-by: David S. Miller --- arch/sparc/kernel/signal_32.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/sparc/kernel/signal_32.c b/arch/sparc/kernel/signal_32.c index c3c12efe0bc0..9c0c8fd0b292 100644 --- a/arch/sparc/kernel/signal_32.c +++ b/arch/sparc/kernel/signal_32.c @@ -89,7 +89,7 @@ asmlinkage void do_sigreturn(struct pt_regs *regs) sf = (struct signal_frame __user *) regs->u_regs[UREG_FP]; /* 1. Make sure we are not getting garbage from the user */ - if (!invalid_frame_pointer(sf, sizeof(*sf))) + if (invalid_frame_pointer(sf, sizeof(*sf))) goto segv_and_exit; if (get_user(ufp, &sf->info.si_regs.u_regs[UREG_FP])) @@ -150,7 +150,7 @@ asmlinkage void do_rt_sigreturn(struct pt_regs *regs) synchronize_user_stack(); sf = (struct rt_signal_frame __user *) regs->u_regs[UREG_FP]; - if (!invalid_frame_pointer(sf, sizeof(*sf))) + if (invalid_frame_pointer(sf, sizeof(*sf))) goto segv; if (get_user(ufp, &sf->regs.u_regs[UREG_FP])) From 7bc61cc5df808008b77a3b72cf814960c675518b Mon Sep 17 00:00:00 2001 From: Eugeniy Paltsev Date: Wed, 19 Oct 2016 10:46:18 +0300 Subject: [PATCH 523/792] drm/arcpgu: Accommodate adv7511 switch to DRM bridge ARC PGU driver starts crashing on initialization after 'commit e12c2f645557 ("drm/i2c: adv7511: Convert to drm_bridge")' This happenes because in "arcpgu_drm_hdmi_init" function we get pointer of "drm_i2c_encoder_driver" structure, which doesn't exist after adv7511 hdmi encoder interface changed from slave encoder to drm bridge. So, when we call "encoder_init" function from this structure driver crashes. Bootlog: ------------------------------------->8-------------------------------- [drm] Initialized drm 1.1.0 20060810 arcpgu e0017000.pgu: arc_pgu ID: 0xabbabaab arcpgu e0017000.pgu: assigned reserved memory node frame_buffer@9e000000 Path: (null) CPU: 0 PID: 1 Comm: swapper Not tainted 4.8.0-00001-gb5642252fa01-dirty #8 task: 9a058000 task.stack: 9a032000 [ECR ]: 0x00220100 => Invalid Read @ 0x00000004 by insn @ 0x803934e8 [EFA ]: 0x00000004 [BLINK ]: drm_atomic_helper_connector_dpms+0xa6/0x230 [ERET ]: drm_atomic_helper_connector_dpms+0xa4/0x230 [STAT32]: 0x00000846 : K DE E2 E1 BTA: 0x8016d949 SP: 0x9a033e34 FP: 0x00000000 LPS: 0x8036f6fc LPE: 0x8036f700 LPC: 0x00000000 r00: 0x8063c118 r01: 0x805b98ac r02: 0x00000b11 r03: 0x00000000 r04: 0x9a010f54 r05: 0x00000000 r06: 0x00000001 r07: 0x00000000 r08: 0x00000028 r09: 0x00000001 r10: 0x00000007 r11: 0x00000054 r12: 0x720a3033 Stack Trace: drm_atomic_helper_connector_dpms+0xa4/0x230 arcpgu_drm_hdmi_init+0xbc/0x228 arcpgu_probe+0x168/0x244 platform_drv_probe+0x26/0x64 really_probe+0x1f0/0x32c __driver_attach+0xa8/0xd0 bus_for_each_dev+0x3c/0x74 bus_add_driver+0xc2/0x184 driver_register+0x50/0xec do_one_initcall+0x3a/0x120 kernel_init_freeable+0x108/0x1a0 ------------------------------------->8-------------------------------- Fix ARC PGU driver to be able work with drm bridge hdmi encoder interface. The hdmi connector code isn't needed anymore as we expect the adv7511 bridge driver to create/manage the connector. Signed-off-by: Eugeniy Paltsev Reviewed-by: Archit Taneja Signed-off-by: Alexey Brodkin --- drivers/gpu/drm/arc/arcpgu_hdmi.c | 159 ++++-------------------------- 1 file changed, 17 insertions(+), 142 deletions(-) diff --git a/drivers/gpu/drm/arc/arcpgu_hdmi.c b/drivers/gpu/drm/arc/arcpgu_hdmi.c index b7a8b2ac4055..b69c66b4897e 100644 --- a/drivers/gpu/drm/arc/arcpgu_hdmi.c +++ b/drivers/gpu/drm/arc/arcpgu_hdmi.c @@ -14,170 +14,45 @@ * */ -#include +#include #include -#include #include "arcpgu.h" -struct arcpgu_drm_connector { - struct drm_connector connector; - struct drm_encoder_slave *encoder_slave; -}; - -static int arcpgu_drm_connector_get_modes(struct drm_connector *connector) -{ - const struct drm_encoder_slave_funcs *sfuncs; - struct drm_encoder_slave *slave; - struct arcpgu_drm_connector *con = - container_of(connector, struct arcpgu_drm_connector, connector); - - slave = con->encoder_slave; - if (slave == NULL) { - dev_err(connector->dev->dev, - "connector_get_modes: cannot find slave encoder for connector\n"); - return 0; - } - - sfuncs = slave->slave_funcs; - if (sfuncs->get_modes == NULL) - return 0; - - return sfuncs->get_modes(&slave->base, connector); -} - -static enum drm_connector_status -arcpgu_drm_connector_detect(struct drm_connector *connector, bool force) -{ - enum drm_connector_status status = connector_status_unknown; - const struct drm_encoder_slave_funcs *sfuncs; - struct drm_encoder_slave *slave; - - struct arcpgu_drm_connector *con = - container_of(connector, struct arcpgu_drm_connector, connector); - - slave = con->encoder_slave; - if (slave == NULL) { - dev_err(connector->dev->dev, - "connector_detect: cannot find slave encoder for connector\n"); - return status; - } - - sfuncs = slave->slave_funcs; - if (sfuncs && sfuncs->detect) - return sfuncs->detect(&slave->base, connector); - - dev_err(connector->dev->dev, "connector_detect: could not detect slave funcs\n"); - return status; -} - -static void arcpgu_drm_connector_destroy(struct drm_connector *connector) -{ - drm_connector_unregister(connector); - drm_connector_cleanup(connector); -} - -static const struct drm_connector_helper_funcs -arcpgu_drm_connector_helper_funcs = { - .get_modes = arcpgu_drm_connector_get_modes, -}; - -static const struct drm_connector_funcs arcpgu_drm_connector_funcs = { - .dpms = drm_helper_connector_dpms, - .reset = drm_atomic_helper_connector_reset, - .detect = arcpgu_drm_connector_detect, - .fill_modes = drm_helper_probe_single_connector_modes, - .destroy = arcpgu_drm_connector_destroy, - .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, - .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, -}; - -static struct drm_encoder_helper_funcs arcpgu_drm_encoder_helper_funcs = { - .dpms = drm_i2c_encoder_dpms, - .mode_fixup = drm_i2c_encoder_mode_fixup, - .mode_set = drm_i2c_encoder_mode_set, - .prepare = drm_i2c_encoder_prepare, - .commit = drm_i2c_encoder_commit, - .detect = drm_i2c_encoder_detect, -}; - static struct drm_encoder_funcs arcpgu_drm_encoder_funcs = { .destroy = drm_encoder_cleanup, }; int arcpgu_drm_hdmi_init(struct drm_device *drm, struct device_node *np) { - struct arcpgu_drm_connector *arcpgu_connector; - struct drm_i2c_encoder_driver *driver; - struct drm_encoder_slave *encoder; - struct drm_connector *connector; - struct i2c_client *i2c_slave; - int ret; + struct drm_encoder *encoder; + struct drm_bridge *bridge; + + int ret = 0; encoder = devm_kzalloc(drm->dev, sizeof(*encoder), GFP_KERNEL); if (encoder == NULL) return -ENOMEM; - i2c_slave = of_find_i2c_device_by_node(np); - if (!i2c_slave || !i2c_get_clientdata(i2c_slave)) { - dev_err(drm->dev, "failed to find i2c slave encoder\n"); + /* Locate drm bridge from the hdmi encoder DT node */ + bridge = of_drm_find_bridge(np); + if (!bridge) return -EPROBE_DEFER; - } - if (i2c_slave->dev.driver == NULL) { - dev_err(drm->dev, "failed to find i2c slave driver\n"); - return -EPROBE_DEFER; - } - - driver = - to_drm_i2c_encoder_driver(to_i2c_driver(i2c_slave->dev.driver)); - ret = driver->encoder_init(i2c_slave, drm, encoder); - if (ret) { - dev_err(drm->dev, "failed to initialize i2c encoder slave\n"); - return ret; - } - - encoder->base.possible_crtcs = 1; - encoder->base.possible_clones = 0; - ret = drm_encoder_init(drm, &encoder->base, &arcpgu_drm_encoder_funcs, + encoder->possible_crtcs = 1; + encoder->possible_clones = 0; + ret = drm_encoder_init(drm, encoder, &arcpgu_drm_encoder_funcs, DRM_MODE_ENCODER_TMDS, NULL); if (ret) return ret; - drm_encoder_helper_add(&encoder->base, - &arcpgu_drm_encoder_helper_funcs); + /* Link drm_bridge to encoder */ + bridge->encoder = encoder; + encoder->bridge = bridge; - arcpgu_connector = devm_kzalloc(drm->dev, sizeof(*arcpgu_connector), - GFP_KERNEL); - if (!arcpgu_connector) { - ret = -ENOMEM; - goto error_encoder_cleanup; - } + ret = drm_bridge_attach(drm, bridge); + if (ret) + drm_encoder_cleanup(encoder); - connector = &arcpgu_connector->connector; - drm_connector_helper_add(connector, &arcpgu_drm_connector_helper_funcs); - ret = drm_connector_init(drm, connector, &arcpgu_drm_connector_funcs, - DRM_MODE_CONNECTOR_HDMIA); - if (ret < 0) { - dev_err(drm->dev, "failed to initialize drm connector\n"); - goto error_encoder_cleanup; - } - - ret = drm_mode_connector_attach_encoder(connector, &encoder->base); - if (ret < 0) { - dev_err(drm->dev, "could not attach connector to encoder\n"); - drm_connector_unregister(connector); - goto error_connector_cleanup; - } - - arcpgu_connector->encoder_slave = encoder; - - return 0; - -error_connector_cleanup: - drm_connector_cleanup(connector); - -error_encoder_cleanup: - drm_encoder_cleanup(&encoder->base); return ret; } From d786810b2f896854506e7b698a137f074942e410 Mon Sep 17 00:00:00 2001 From: Kan Liang Date: Tue, 8 Nov 2016 13:54:41 -0500 Subject: [PATCH 524/792] perf/x86/intel/uncore: Add more Intel uncore IMC PCI IDs for SkyLake Several uncore IMC PCI IDs are missed for Intel SkyLake. Add the PCI IDs for SkyLake Y, U, H and S platforms. Rename the ID macros for 0x191f and 0x190c. The corresponding bug: https://bugzilla.kernel.org/show_bug.cgi?id=187301 The related datasheets are also attached in the bug entry for permanent reference. Reported-by: Ben Widawsky Tested-by: Ben Widawsky Signed-off-by: Kan Liang Reviewed-by: Ben Widawsky Cc: Alexander Shishkin Cc: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Thomas Gleixner Cc: Vince Weaver Link: http://lkml.kernel.org/r/1478631281-5061-1-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar --- arch/x86/events/intel/uncore_snb.c | 32 ++++++++++++++++++++++++++---- 1 file changed, 28 insertions(+), 4 deletions(-) diff --git a/arch/x86/events/intel/uncore_snb.c b/arch/x86/events/intel/uncore_snb.c index 5f845eef9a4d..81195cca7eae 100644 --- a/arch/x86/events/intel/uncore_snb.c +++ b/arch/x86/events/intel/uncore_snb.c @@ -8,8 +8,12 @@ #define PCI_DEVICE_ID_INTEL_HSW_IMC 0x0c00 #define PCI_DEVICE_ID_INTEL_HSW_U_IMC 0x0a04 #define PCI_DEVICE_ID_INTEL_BDW_IMC 0x1604 -#define PCI_DEVICE_ID_INTEL_SKL_IMC 0x191f -#define PCI_DEVICE_ID_INTEL_SKL_U_IMC 0x190c +#define PCI_DEVICE_ID_INTEL_SKL_U_IMC 0x1904 +#define PCI_DEVICE_ID_INTEL_SKL_Y_IMC 0x190c +#define PCI_DEVICE_ID_INTEL_SKL_HD_IMC 0x1900 +#define PCI_DEVICE_ID_INTEL_SKL_HQ_IMC 0x1910 +#define PCI_DEVICE_ID_INTEL_SKL_SD_IMC 0x190f +#define PCI_DEVICE_ID_INTEL_SKL_SQ_IMC 0x191f /* SNB event control */ #define SNB_UNC_CTL_EV_SEL_MASK 0x000000ff @@ -616,13 +620,29 @@ static const struct pci_device_id bdw_uncore_pci_ids[] = { static const struct pci_device_id skl_uncore_pci_ids[] = { { /* IMC */ - PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SKL_IMC), + PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SKL_Y_IMC), .driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0), }, { /* IMC */ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SKL_U_IMC), .driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0), }, + { /* IMC */ + PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SKL_HD_IMC), + .driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0), + }, + { /* IMC */ + PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SKL_HQ_IMC), + .driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0), + }, + { /* IMC */ + PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SKL_SD_IMC), + .driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0), + }, + { /* IMC */ + PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SKL_SQ_IMC), + .driver_data = UNCORE_PCI_DEV_DATA(SNB_PCI_UNCORE_IMC, 0), + }, { /* end: all zeroes */ }, }; @@ -666,8 +686,12 @@ static const struct imc_uncore_pci_dev desktop_imc_pci_ids[] = { IMC_DEV(HSW_IMC, &hsw_uncore_pci_driver), /* 4th Gen Core Processor */ IMC_DEV(HSW_U_IMC, &hsw_uncore_pci_driver), /* 4th Gen Core ULT Mobile Processor */ IMC_DEV(BDW_IMC, &bdw_uncore_pci_driver), /* 5th Gen Core U */ - IMC_DEV(SKL_IMC, &skl_uncore_pci_driver), /* 6th Gen Core */ + IMC_DEV(SKL_Y_IMC, &skl_uncore_pci_driver), /* 6th Gen Core Y */ IMC_DEV(SKL_U_IMC, &skl_uncore_pci_driver), /* 6th Gen Core U */ + IMC_DEV(SKL_HD_IMC, &skl_uncore_pci_driver), /* 6th Gen Core H Dual Core */ + IMC_DEV(SKL_HQ_IMC, &skl_uncore_pci_driver), /* 6th Gen Core H Quad Core */ + IMC_DEV(SKL_SD_IMC, &skl_uncore_pci_driver), /* 6th Gen Core S Dual Core */ + IMC_DEV(SKL_SQ_IMC, &skl_uncore_pci_driver), /* 6th Gen Core S Quad Core */ { /* end marker */ } }; From 48004881f6935704e5e4ffaf9e0ec921a25db243 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 7 Nov 2016 16:52:04 +0000 Subject: [PATCH 525/792] drm/i915: Mark CPU cache as dirty when used for rendering MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On LLC, or even snooped, machines rendering via the GPU ends up in the CPU cache. This cacheline dirt also needs to be flushed to main memory when moving to an incoherent domain, such as the display's scanout engine. Mostly, this happens because either the object is marked as dirty from its first use or is avoided by setting the object into the display domain from the start. v2: Treat WT as not requiring a clflush prior to use on the display engine as well. Fixes: 0f71979ab7fb ("drm/i915: Performed deferred clflush inside set-cache-level") References: https://bugs.freedesktop.org/show_bug.cgi?id=95414 Signed-off-by: Chris Wilson Cc: Jani Nikula Cc: Ville Syrjälä Cc: # v4.0+ Reviewed-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/20161107165204.7008-1-chris@chris-wilson.co.uk (cherry picked from commit 7aa6ca61ee5546d74b76610894924cdb0d4a1af0) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/i915_gem_execbuffer.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c index 7adb4c77cc7f..a218c2e395e7 100644 --- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c @@ -1281,6 +1281,12 @@ i915_gem_validate_context(struct drm_device *dev, struct drm_file *file, return ctx; } +static bool gpu_write_needs_clflush(struct drm_i915_gem_object *obj) +{ + return !(obj->cache_level == I915_CACHE_NONE || + obj->cache_level == I915_CACHE_WT); +} + void i915_vma_move_to_active(struct i915_vma *vma, struct drm_i915_gem_request *req, unsigned int flags) @@ -1311,6 +1317,8 @@ void i915_vma_move_to_active(struct i915_vma *vma, /* update for the implicit flush after a batch */ obj->base.write_domain &= ~I915_GEM_GPU_DOMAINS; + if (!obj->cache_dirty && gpu_write_needs_clflush(obj)) + obj->cache_dirty = true; } if (flags & EXEC_OBJECT_NEEDS_FENCE) From 9f1a7ab260300c670608a9db861187069f8b179a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Mon, 7 Nov 2016 22:20:55 +0200 Subject: [PATCH 526/792] drm/i915: Grab the rotation from the passed plane state for VLV sprites MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Use the passed in plane_state instead of plane->state in vlv_update_plane(). Currently the two are one and the same, but if we start queuing up multiple plane updates they might not be. Looks like this was rebase fail on my part. Cc: Daniel Vetter Fixes: 8d0deca8c6e0 ("drm/i915: Pass 90/270 vs. 0/180 rotation info for intel_gen4_compute_page_offset()") Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1478550057-24864-4-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson (cherry picked from commit 11df4d95b3ad9e6a6a6e0907bb200610a4d24887) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_sprite.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c index 73a521fdf1bd..dbed12c484c9 100644 --- a/drivers/gpu/drm/i915/intel_sprite.c +++ b/drivers/gpu/drm/i915/intel_sprite.c @@ -358,7 +358,7 @@ vlv_update_plane(struct drm_plane *dplane, int plane = intel_plane->plane; u32 sprctl; u32 sprsurf_offset, linear_offset; - unsigned int rotation = dplane->state->rotation; + unsigned int rotation = plane_state->base.rotation; const struct drm_intel_sprite_colorkey *key = &plane_state->ckey; int crtc_x = plane_state->base.dst.x1; int crtc_y = plane_state->base.dst.y1; From fc22b787890f9f9067fd130feec42297a4ee62ba Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Fri, 21 Oct 2016 16:44:38 +0300 Subject: [PATCH 527/792] drm/i915: Refresh that status of MST capable connectors in ->detect() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Once we've determined that the sink is MST capable we never end up running through the full detect cycle again, despite getting HPDs. Fix tht by ripping out the incorrect piece of code responsible. This got broken when I moved the long HPD handling to the ->detect() hook, but failed to remove the leftover code. Cc: Ander Conselvan de Oliveira Cc: drm-intel-fixes@lists.freedesktop.org Cc: Rui Tiago Matos Tested-by: Rui Tiago Matos Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98323 Cc: Kirill A. Shutemov Tested-by: Kirill A. Shutemov References: https://bugs.freedesktop.org/show_bug.cgi?id=98306 Fixes: 1015811609c0 ("drm/i915: Move long hpd handling into the hotplug work") Cc: stable@vger.kernel.org Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1477057478-29328-1-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson (cherry picked from commit 1aab956c7b8872fb6976328316bfad62c6e67cf8) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_dp.c | 10 ---------- 1 file changed, 10 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 3581b5a7f716..bf344d08356a 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -4463,21 +4463,11 @@ static enum drm_connector_status intel_dp_detect(struct drm_connector *connector, bool force) { struct intel_dp *intel_dp = intel_attached_dp(connector); - struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp); - struct intel_encoder *intel_encoder = &intel_dig_port->base; enum drm_connector_status status = connector->status; DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", connector->base.id, connector->name); - if (intel_dp->is_mst) { - /* MST devices are disconnected from a monitor POV */ - intel_dp_unset_edid(intel_dp); - if (intel_encoder->type != INTEL_OUTPUT_EDP) - intel_encoder->type = INTEL_OUTPUT_DP; - return connector_status_disconnected; - } - /* If full detect is not performed yet, do a full detect */ if (!intel_dp->detect_done) status = intel_dp_long_pulse(intel_dp->attached_connector); From 9a2541910dc7eaaa6859eea8a0ffda673059a623 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 11 Nov 2016 12:33:20 +0100 Subject: [PATCH 528/792] ALSA: hda - Fix mic regression by ASRock mobo fixup The commit [1a3f099101b8: ALSA: hda - Fix surround output pins for ASRock B150M mobo] introduced a fixup of pin configs for ASRock mobos to fix the surround outputs. However, this overrides the pin configs of the mic pins as if they are outputs-only, effectively disabling the mic inputs. Of course, it's a regression wrt mic functionality. Actually the pins 0x18 and 0x1a don't need to be changed; we just need to disable the bogus pins 0x14 and 0x15. Then the auto-parser will pick up mic pins as switchable and assign the surround outputs there. This patch removes the incorrect pin overrides of NID 0x18 and 0x1a from the ASRock fixup. Fixes: 1a3f099101b8 ('ALSA: hda - Fix surround output pins for ASRock...') Reported-and-tested-by: Vitor Antunes Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=187431 Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 2f909dd8b7b8..ea81c08ddc7a 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6907,8 +6907,6 @@ static const struct hda_fixup alc662_fixups[] = { .v.pins = (const struct hda_pintbl[]) { { 0x15, 0x40f000f0 }, /* disabled */ { 0x16, 0x40f000f0 }, /* disabled */ - { 0x18, 0x01014011 }, /* LO */ - { 0x1a, 0x01014012 }, /* LO */ { } } }, From 8e94a46c1770884166b31adc99eba7da65a446a7 Mon Sep 17 00:00:00 2001 From: Mario Kleiner Date: Wed, 9 Nov 2016 02:25:15 +0100 Subject: [PATCH 529/792] drm/amdgpu: Attach exclusive fence to prime exported bo's. (v5) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit External clients which import our bo's wait only for exclusive dmabuf-fences, not on shared ones, ditto for bo's which we import from external providers and write to. Therefore attach exclusive fences on prime shared buffers if our exported buffer gets imported by an external client, or if we import a buffer from an external exporter. See discussion in thread: https://lists.freedesktop.org/archives/dri-devel/2016-October/122370.html Prime export tested on Intel iGPU + AMD Tonga dGPU as DRI3/Present Prime render offload, and with the Tonga standalone as primary gpu. v2: Add a wait for all shared fences before prime export, as suggested by Christian Koenig. v3: - Mark buffer prime_exported in amdgpu_gem_prime_pin, so we only use the exclusive fence when exporting a bo to external clients like a separate iGPU, but not when exporting/importing from/to ourselves as part of regular DRI3 fd passing. - Propagate failure of reservation_object_wait_rcu back to caller. v4: - Switch to a prime_shared_count counter instead of a flag, which gets in/decremented on prime_pin/unpin, so we can switch back to shared fences if all clients detach from our exported bo. - Also switch to exclusive fence for prime imported bo's. v5: - Drop lret, instead use int ret -> long ret, as proposed by Christian. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95472 Tested-by: Mike Lothian (v1) Signed-off-by: Mario Kleiner Reviewed-by: Christian König . Cc: Christian König Cc: Michel Dänzer Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu.h | 1 + drivers/gpu/drm/amd/amdgpu/amdgpu_bo_list.c | 2 +- drivers/gpu/drm/amd/amdgpu/amdgpu_prime.c | 20 +++++++++++++++++++- 3 files changed, 21 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu.h b/drivers/gpu/drm/amd/amdgpu/amdgpu.h index 039b57e4644c..496f72b134eb 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h @@ -459,6 +459,7 @@ struct amdgpu_bo { u64 metadata_flags; void *metadata; u32 metadata_size; + unsigned prime_shared_count; /* list of all virtual address to which this bo * is associated to */ diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_bo_list.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_bo_list.c index 651115dcce12..c02db01f6583 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_bo_list.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_bo_list.c @@ -132,7 +132,7 @@ static int amdgpu_bo_list_set(struct amdgpu_device *adev, entry->priority = min(info[i].bo_priority, AMDGPU_BO_LIST_MAX_PRIORITY); entry->tv.bo = &entry->robj->tbo; - entry->tv.shared = true; + entry->tv.shared = !entry->robj->prime_shared_count; if (entry->robj->prefered_domains == AMDGPU_GEM_DOMAIN_GDS) gds_obj = entry->robj; diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_prime.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_prime.c index 7700dc22f243..3826d5aea0a6 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_prime.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_prime.c @@ -74,20 +74,36 @@ amdgpu_gem_prime_import_sg_table(struct drm_device *dev, if (ret) return ERR_PTR(ret); + bo->prime_shared_count = 1; return &bo->gem_base; } int amdgpu_gem_prime_pin(struct drm_gem_object *obj) { struct amdgpu_bo *bo = gem_to_amdgpu_bo(obj); - int ret = 0; + long ret = 0; ret = amdgpu_bo_reserve(bo, false); if (unlikely(ret != 0)) return ret; + /* + * Wait for all shared fences to complete before we switch to future + * use of exclusive fence on this prime shared bo. + */ + ret = reservation_object_wait_timeout_rcu(bo->tbo.resv, true, false, + MAX_SCHEDULE_TIMEOUT); + if (unlikely(ret < 0)) { + DRM_DEBUG_PRIME("Fence wait failed: %li\n", ret); + amdgpu_bo_unreserve(bo); + return ret; + } + /* pin buffer into GTT */ ret = amdgpu_bo_pin(bo, AMDGPU_GEM_DOMAIN_GTT, NULL); + if (likely(ret == 0)) + bo->prime_shared_count++; + amdgpu_bo_unreserve(bo); return ret; } @@ -102,6 +118,8 @@ void amdgpu_gem_prime_unpin(struct drm_gem_object *obj) return; amdgpu_bo_unpin(bo); + if (bo->prime_shared_count) + bo->prime_shared_count--; amdgpu_bo_unreserve(bo); } From 9e80c719a82be2399bb06eab6cd27cb97aa59742 Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Thu, 10 Nov 2016 10:46:04 -0800 Subject: [PATCH 530/792] mm: remove extra newline from allocation stall warning Commit 63f53dea0c98 ("mm: warn about allocations which stall for too long") by error embedded "\n" in the format string, resulting in strange output. [ 722.876655] kworker/0:1: page alloction stalls for 160001ms, order:0 [ 722.876656] , mode:0x2400000(GFP_NOIO) [ 722.876657] CPU: 0 PID: 6966 Comm: kworker/0:1 Not tainted 4.8.0+ #69 Link: http://lkml.kernel.org/r/1476026219-7974-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp Signed-off-by: Tetsuo Handa Acked-by: Michal Hocko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_alloc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 072d791dce2d..6de9440e3ae2 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -3658,7 +3658,7 @@ retry: /* Make sure we know about allocations which stall for too long */ if (time_after(jiffies, alloc_start + stall_timeout)) { warn_alloc(gfp_mask, - "page alloction stalls for %ums, order:%u\n", + "page allocation stalls for %ums, order:%u", jiffies_to_msecs(jiffies-alloc_start), order); stall_timeout += 10 * HZ; } From 5e322beefc8699b5747cfb35539a9496034e4296 Mon Sep 17 00:00:00 2001 From: Vlastimil Babka Date: Thu, 10 Nov 2016 10:46:07 -0800 Subject: [PATCH 531/792] mm, frontswap: make sure allocated frontswap map is assigned Christian Borntraeger reports: With commit 8ea1d2a1985a ("mm, frontswap: convert frontswap_enabled to static key") kmemleak complains about a memory leak in swapon unreferenced object 0x3e09ba56000 (size 32112640): comm "swapon", pid 7852, jiffies 4294968787 (age 1490.770s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: __vmalloc_node_range+0x194/0x2d8 vzalloc+0x58/0x68 SyS_swapon+0xd60/0x12f8 system_call+0xd6/0x270 Turns out kmemleak is right. We now allocate the frontswap map depending on the kernel config (and no longer on the enablement) swapfile.c: [...] if (IS_ENABLED(CONFIG_FRONTSWAP)) frontswap_map = vzalloc(BITS_TO_LONGS(maxpages) * sizeof(long)); but later on this is passed along --> enable_swap_info(p, prio, swap_map, cluster_info, frontswap_map); and ignored if frontswap is disabled --> frontswap_init(p->type, frontswap_map); static inline void frontswap_init(unsigned type, unsigned long *map) { if (frontswap_enabled()) __frontswap_init(type, map); } Thing is, that frontswap map is never freed. The leakage is relatively not that bad, because swapon is an infrequent and privileged operation. However, if the first frontswap backend is registered after a swap type has been already enabled, it will WARN_ON in frontswap_register_ops() and frontswap will not be available for the swap type. Fix this by making sure the map is assigned by frontswap_init() as long as CONFIG_FRONTSWAP is enabled. Fixes: 8ea1d2a1985a ("mm, frontswap: convert frontswap_enabled to static key") Link: http://lkml.kernel.org/r/20161026134220.2566-1-vbabka@suse.cz Signed-off-by: Vlastimil Babka Reported-by: Christian Borntraeger Cc: Konrad Rzeszutek Wilk Cc: Boris Ostrovsky Cc: David Vrabel Cc: Juergen Gross Cc: "Kirill A. Shutemov" Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/frontswap.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/include/linux/frontswap.h b/include/linux/frontswap.h index c46d2aa16d81..1d18af034554 100644 --- a/include/linux/frontswap.h +++ b/include/linux/frontswap.h @@ -106,8 +106,9 @@ static inline void frontswap_invalidate_area(unsigned type) static inline void frontswap_init(unsigned type, unsigned long *map) { - if (frontswap_enabled()) - __frontswap_init(type, map); +#ifdef CONFIG_FRONTSWAP + __frontswap_init(type, map); +#endif } #endif /* _LINUX_FRONTSWAP_H */ From 9956edf37e65e93fbb76dcff1236dff2323d306a Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Thu, 10 Nov 2016 10:46:11 -0800 Subject: [PATCH 532/792] shmem: fix pageflags after swapping DMA32 object If shmem_alloc_page() does not set PageLocked and PageSwapBacked, then shmem_replace_page() needs to do so for itself. Without this, it puts newpage on the wrong lru, re-unlocks the unlocked newpage, and system descends into "Bad page" reports and freeze; or if CONFIG_DEBUG_VM=y, it hits an earlier VM_BUG_ON_PAGE(!PageLocked), depending on config. But shmem_replace_page() is not a common path: it's only called when swapin (or swapoff) finds the page was already read into an unsuitable zone: usually all zones are suitable, but gem objects for a few drm devices (gma500, omapdrm, crestline, broadwater) require zone DMA32 if there's more than 4GB of ram. Fixes: 800d8c63b2e9 ("shmem: add huge pages support") Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1611062003510.11253@eggly.anvils Signed-off-by: Hugh Dickins Acked-by: Kirill A. Shutemov Cc: [4.8.x] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/shmem.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/mm/shmem.c b/mm/shmem.c index ad7813d73ea7..166ebf5d2bce 100644 --- a/mm/shmem.c +++ b/mm/shmem.c @@ -1483,6 +1483,8 @@ static int shmem_replace_page(struct page **pagep, gfp_t gfp, copy_highpage(newpage, oldpage); flush_dcache_page(newpage); + __SetPageLocked(newpage); + __SetPageSwapBacked(newpage); SetPageUptodate(newpage); set_page_private(newpage, swap_index); SetPageSwapCache(newpage); From eef06b82f16c78dc0197e3e9d5b2230647a890ff Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 10 Nov 2016 10:46:13 -0800 Subject: [PATCH 533/792] scripts/bloat-o-meter: fix SIGPIPE Fix piping output to a program which quickly exits (read: head -n1) $ ./scripts/bloat-o-meter ../vmlinux-000 ../obj/vmlinux | head -n1 add/remove: 0/0 grow/shrink: 9/60 up/down: 124/-305 (-181) close failed in file object destructor: sys.excepthook is missing lost sys.stderr Link: http://lkml.kernel.org/r/20161028204618.GA29923@avx2 Signed-off-by: Alexey Dobriyan Cc: Matt Mackall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- scripts/bloat-o-meter | 3 +++ 1 file changed, 3 insertions(+) diff --git a/scripts/bloat-o-meter b/scripts/bloat-o-meter index 19f5adfd877d..d9ff038c1b28 100755 --- a/scripts/bloat-o-meter +++ b/scripts/bloat-o-meter @@ -8,6 +8,9 @@ # of the GNU General Public License, incorporated herein by reference. import sys, os, re +from signal import signal, SIGPIPE, SIG_DFL + +signal(SIGPIPE, SIG_DFL) if len(sys.argv) != 3: sys.stderr.write("usage: %s file1 file2\n" % sys.argv[0]) From 6b36ba599d602d8a73920fb5c470fe272fac49c1 Mon Sep 17 00:00:00 2001 From: Shiraz Hashim Date: Thu, 10 Nov 2016 10:46:16 -0800 Subject: [PATCH 534/792] mm/cma.c: check the max limit for cma allocation CMA allocation request size is represented by size_t that gets truncated when same is passed as int to bitmap_find_next_zero_area_off. We observe that during fuzz testing when cma allocation request is too high, bitmap_find_next_zero_area_off still returns success due to the truncation. This leads to kernel crash, as subsequent code assumes that requested memory is available. Fail cma allocation in case the request breaches the corresponding cma region size. Link: http://lkml.kernel.org/r/1478189211-3467-1-git-send-email-shashim@codeaurora.org Signed-off-by: Shiraz Hashim Cc: Catalin Marinas Cc: Stephen Rothwell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/cma.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/mm/cma.c b/mm/cma.c index 384c2cb51b56..c960459eda7e 100644 --- a/mm/cma.c +++ b/mm/cma.c @@ -385,6 +385,9 @@ struct page *cma_alloc(struct cma *cma, size_t count, unsigned int align) bitmap_maxno = cma_bitmap_maxno(cma); bitmap_count = cma_bitmap_pages_to_bits(cma, count); + if (bitmap_count > bitmap_maxno) + return NULL; + for (;;) { mutex_lock(&cma->lock); bitmap_no = bitmap_find_next_zero_area_off(cma->bitmap, From dd111be69114cc867f8e826284559bfbc1c40e37 Mon Sep 17 00:00:00 2001 From: Jann Horn Date: Thu, 10 Nov 2016 10:46:19 -0800 Subject: [PATCH 535/792] swapfile: fix memory corruption via malformed swapfile When root activates a swap partition whose header has the wrong endianness, nr_badpages elements of badpages are swabbed before nr_badpages has been checked, leading to a buffer overrun of up to 8GB. This normally is not a security issue because it can only be exploited by root (more specifically, a process with CAP_SYS_ADMIN or the ability to modify a swap file/partition), and such a process can already e.g. modify swapped-out memory of any other userspace process on the system. Link: http://lkml.kernel.org/r/1477949533-2509-1-git-send-email-jann@thejh.net Signed-off-by: Jann Horn Acked-by: Kees Cook Acked-by: Jerome Marchand Acked-by: Johannes Weiner Cc: "Kirill A. Shutemov" Cc: Vlastimil Babka Cc: Hugh Dickins Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/swapfile.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/mm/swapfile.c b/mm/swapfile.c index 2210de290b54..f30438970cd1 100644 --- a/mm/swapfile.c +++ b/mm/swapfile.c @@ -2224,6 +2224,8 @@ static unsigned long read_swap_header(struct swap_info_struct *p, swab32s(&swap_header->info.version); swab32s(&swap_header->info.last_page); swab32s(&swap_header->info.nr_badpages); + if (swap_header->info.nr_badpages > MAX_SWAP_BADPAGES) + return 0; for (i = 0; i < swap_header->info.nr_badpages; i++) swab32s(&swap_header->info.badpages[i]); } From c3901e722b2975666f42748340df798114742d6d Mon Sep 17 00:00:00 2001 From: Naoya Horiguchi Date: Thu, 10 Nov 2016 10:46:23 -0800 Subject: [PATCH 536/792] mm: hwpoison: fix thp split handling in memory_failure() When memory_failure() runs on a thp tail page after pmd is split, we trigger the following VM_BUG_ON_PAGE(): page:ffffd7cd819b0040 count:0 mapcount:0 mapping: (null) index:0x1 flags: 0x1fffc000400000(hwpoison) page dumped because: VM_BUG_ON_PAGE(!page_count(p)) ------------[ cut here ]------------ kernel BUG at /src/linux-dev/mm/memory-failure.c:1132! memory_failure() passed refcount and page lock from tail page to head page, which is not needed because we can pass any subpage to split_huge_page(). Fixes: 61f5d698cc97 ("mm: re-enable THP") Link: http://lkml.kernel.org/r/1477961577-7183-1-git-send-email-n-horiguchi@ah.jp.nec.com Signed-off-by: Naoya Horiguchi Cc: [4.5+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memory-failure.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/mm/memory-failure.c b/mm/memory-failure.c index de88f33519c0..19e796d36a62 100644 --- a/mm/memory-failure.c +++ b/mm/memory-failure.c @@ -1112,10 +1112,10 @@ int memory_failure(unsigned long pfn, int trapno, int flags) } if (!PageHuge(p) && PageTransHuge(hpage)) { - lock_page(hpage); - if (!PageAnon(hpage) || unlikely(split_huge_page(hpage))) { - unlock_page(hpage); - if (!PageAnon(hpage)) + lock_page(p); + if (!PageAnon(p) || unlikely(split_huge_page(p))) { + unlock_page(p); + if (!PageAnon(p)) pr_err("Memory failure: %#lx: non anonymous thp\n", pfn); else @@ -1126,9 +1126,7 @@ int memory_failure(unsigned long pfn, int trapno, int flags) put_hwpoison_page(p); return -EBUSY; } - unlock_page(hpage); - get_hwpoison_page(p); - put_hwpoison_page(hpage); + unlock_page(p); VM_BUG_ON_PAGE(!page_count(p), p); hpage = compound_head(p); } From c6c7d83b9c9e6a8b3e6d84c820ac61fbffc9e396 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 10 Nov 2016 10:46:26 -0800 Subject: [PATCH 537/792] Revert "console: don't prefer first registered if DT specifies stdout-path" This reverts commit 05fd007e4629 ("console: don't prefer first registered if DT specifies stdout-path"). The reverted commit changes existing behavior on which many ARM boards rely. Many ARM small-board-computers, like e.g. the Raspberry Pi have both a video output and a serial console. Depending on whether the user is using the device as a more regular computer; or as a headless device we need to have the console on either one or the other. Many users rely on the kernel behavior of the console being present on both outputs, before the reverted commit the console setup with no console= kernel arguments on an ARM board which sets stdout-path in dt would look like this: [root@localhost ~]# cat /proc/consoles ttyS0 -W- (EC p a) 4:64 tty0 -WU (E p ) 4:1 Where as after the reverted commit, it looks like this: [root@localhost ~]# cat /proc/consoles ttyS0 -W- (EC p a) 4:64 This commit reverts commit 05fd007e4629 ("console: don't prefer first registered if DT specifies stdout-path") restoring the original behavior. Fixes: 05fd007e4629 ("console: don't prefer first registered if DT specifies stdout-path") Link: http://lkml.kernel.org/r/20161104121135.4780-2-hdegoede@redhat.com Signed-off-by: Hans de Goede Cc: Paul Burton Cc: Rob Herring Cc: Frank Rowand Cc: Thorsten Leemhuis Cc: Greg Kroah-Hartman Cc: Tejun Heo Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/of/base.c | 2 -- include/linux/console.h | 6 ------ kernel/printk/printk.c | 13 +------------ 3 files changed, 1 insertion(+), 20 deletions(-) diff --git a/drivers/of/base.c b/drivers/of/base.c index d687e6de24a0..a0bccb54a9bd 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -2077,8 +2077,6 @@ void of_alias_scan(void * (*dt_alloc)(u64 size, u64 align)) name = of_get_property(of_aliases, "stdout", NULL); if (name) of_stdout = of_find_node_opts_by_path(name, &of_stdout_options); - if (of_stdout) - console_set_by_of(); } if (!of_aliases) diff --git a/include/linux/console.h b/include/linux/console.h index 3672809234a7..d530c4627e54 100644 --- a/include/linux/console.h +++ b/include/linux/console.h @@ -173,12 +173,6 @@ static inline void console_sysfs_notify(void) #endif extern bool console_suspend_enabled; -#ifdef CONFIG_OF -extern void console_set_by_of(void); -#else -static inline void console_set_by_of(void) {} -#endif - /* Suspend and resume console messages over PM events */ extern void suspend_console(void); extern void resume_console(void); diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c index de08fc90baaf..5028f4fd504a 100644 --- a/kernel/printk/printk.c +++ b/kernel/printk/printk.c @@ -253,17 +253,6 @@ static int preferred_console = -1; int console_set_on_cmdline; EXPORT_SYMBOL(console_set_on_cmdline); -#ifdef CONFIG_OF -static bool of_specified_console; - -void console_set_by_of(void) -{ - of_specified_console = true; -} -#else -# define of_specified_console false -#endif - /* Flag: console code may call schedule() */ static int console_may_schedule; @@ -2657,7 +2646,7 @@ void register_console(struct console *newcon) * didn't select a console we take the first one * that registers here. */ - if (preferred_console < 0 && !of_specified_console) { + if (preferred_console < 0) { if (newcon->index < 0) newcon->index = 0; if (newcon->setup == NULL || From d006c71f8ad2663dd47f81bf96bf655eeed428e2 Mon Sep 17 00:00:00 2001 From: Junxiao Bi Date: Thu, 10 Nov 2016 10:46:29 -0800 Subject: [PATCH 538/792] ocfs2: fix not enough credit panic The following panic was caught when run ocfs2 disconfig single test (block size 512 and cluster size 8192). ocfs2_journal_dirty() return -ENOSPC, that means credits were used up. The total credit should include 3 times of "num_dx_leaves" from ocfs2_dx_dir_rebalance(), because 2 times will be consumed in ocfs2_dx_dir_transfer_leaf() and 1 time will be consumed in ocfs2_dx_dir_new_cluster() -> __ocfs2_dx_dir_new_cluster() -> ocfs2_dx_dir_format_cluster(). But only two times is included in ocfs2_dx_dir_rebalance_credits(), fix it. This can cause read-only fs(v4.1+) or panic for mainline linux depending on mount option. ------------[ cut here ]------------ kernel BUG at fs/ocfs2/journal.c:775! invalid opcode: 0000 [#1] SMP Modules linked in: ocfs2 nfsd lockd grace nfs_acl auth_rpcgss sunrpc autofs4 ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs sd_mod sg ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i libcxgbi cxgb3 mdio ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ppdev xen_kbdfront xen_netfront fb_sys_fops sysimgblt sysfillrect syscopyarea parport_pc parport acpi_cpufreq i2c_piix4 i2c_core pcspkr ext4 jbd2 mbcache xen_blkfront floppy pata_acpi ata_generic ata_piix dm_mirror dm_region_hash dm_log dm_mod CPU: 2 PID: 10601 Comm: dd Not tainted 4.1.12-71.el6uek.bug24939243.x86_64 #2 Hardware name: Xen HVM domU, BIOS 4.4.4OVM 02/11/2016 task: ffff8800b6de6200 ti: ffff8800a7d48000 task.ti: ffff8800a7d48000 RIP: ocfs2_journal_dirty+0xa7/0xb0 [ocfs2] RSP: 0018:ffff8800a7d4b6d8 EFLAGS: 00010286 RAX: 00000000ffffffe4 RBX: 00000000814d0a9c RCX: 00000000000004f9 RDX: ffffffffa008e990 RSI: ffffffffa008f1ee RDI: ffff8800622b6460 RBP: ffff8800a7d4b6f8 R08: ffffffffa008f288 R09: ffff8800622b6460 R10: 0000000000000000 R11: 0000000000000282 R12: 0000000002c8421e R13: ffff88006d0cad00 R14: ffff880092beef60 R15: 0000000000000070 FS: 00007f9b83e92700(0000) GS:ffff8800be880000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fb2c0d1a000 CR3: 0000000008f80000 CR4: 00000000000406e0 Call Trace: ocfs2_dx_dir_transfer_leaf+0x159/0x1a0 [ocfs2] ocfs2_dx_dir_rebalance+0xd9b/0xea0 [ocfs2] ocfs2_find_dir_space_dx+0xd3/0x300 [ocfs2] ocfs2_prepare_dx_dir_for_insert+0x219/0x450 [ocfs2] ocfs2_prepare_dir_for_insert+0x1d6/0x580 [ocfs2] ocfs2_mknod+0x5a2/0x1400 [ocfs2] ocfs2_create+0x73/0x180 [ocfs2] vfs_create+0xd8/0x100 lookup_open+0x185/0x1c0 do_last+0x36d/0x780 path_openat+0x92/0x470 do_filp_open+0x4a/0xa0 do_sys_open+0x11a/0x230 SyS_open+0x1e/0x20 system_call_fastpath+0x12/0x71 Code: 1d 3f 29 09 00 48 85 db 74 1f 48 8b 03 0f 1f 80 00 00 00 00 48 8b 7b 08 48 83 c3 10 4c 89 e6 ff d0 48 8b 03 48 85 c0 75 eb eb 90 <0f> 0b eb fe 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 55 41 54 RIP ocfs2_journal_dirty+0xa7/0xb0 [ocfs2] ---[ end trace 91ac5312a6ee1288 ]--- Kernel panic - not syncing: Fatal exception Kernel Offset: disabled Link: http://lkml.kernel.org/r/1478248135-31963-1-git-send-email-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi Cc: Mark Fasheh Cc: Joel Becker Cc: Joseph Qi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/ocfs2/dir.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ocfs2/dir.c b/fs/ocfs2/dir.c index e7054e2ac922..3ecb9f337b7d 100644 --- a/fs/ocfs2/dir.c +++ b/fs/ocfs2/dir.c @@ -3699,7 +3699,7 @@ static void ocfs2_dx_dir_transfer_leaf(struct inode *dir, u32 split_hash, static int ocfs2_dx_dir_rebalance_credits(struct ocfs2_super *osb, struct ocfs2_dx_root_block *dx_root) { - int credits = ocfs2_clusters_to_blocks(osb->sb, 2); + int credits = ocfs2_clusters_to_blocks(osb->sb, 3); credits += ocfs2_calc_extend_credits(osb->sb, &dx_root->dr_list); credits += ocfs2_quota_trans_credits(osb->sb); From 96b96a96ddee4ba08ce4aeb8a558a3271fd4a7a7 Mon Sep 17 00:00:00 2001 From: Mike Kravetz Date: Thu, 10 Nov 2016 10:46:32 -0800 Subject: [PATCH 539/792] mm/hugetlb: fix huge page reservation leak in private mapping error paths Error paths in hugetlb_cow() and hugetlb_no_page() may free a newly allocated huge page. If a reservation was associated with the huge page, alloc_huge_page() consumed the reservation while allocating. When the newly allocated page is freed in free_huge_page(), it will increment the global reservation count. However, the reservation entry in the reserve map will remain. This is not an issue for shared mappings as the entry in the reserve map indicates a reservation exists. But, an entry in a private mapping reserve map indicates the reservation was consumed and no longer exists. This results in an inconsistency between the reserve map and the global reservation count. This 'leaks' a reserved huge page. Create a new routine restore_reserve_on_error() to restore the reserve entry in these specific error paths. This routine makes use of a new function vma_add_reservation() which will add a reserve entry for a specific address/page. In general, these error paths were rarely (if ever) taken on most architectures. However, powerpc contained arch specific code that that resulted in an extra fault and execution of these error paths on all private mappings. Fixes: 67961f9db8c4 ("mm/hugetlb: fix huge page reserve accounting for private mappings) Link: http://lkml.kernel.org/r/1476933077-23091-2-git-send-email-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz Reported-by: Jan Stancek Tested-by: Jan Stancek Reviewed-by: Aneesh Kumar K.V Acked-by: Hillf Danton Cc: Naoya Horiguchi Cc: Michal Hocko Cc: Kirill A . Shutemov Cc: Dave Hansen Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/hugetlb.c | 66 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 66 insertions(+) diff --git a/mm/hugetlb.c b/mm/hugetlb.c index ec49d9ef1eef..418bf01a50ed 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -1826,11 +1826,17 @@ static void return_unused_surplus_pages(struct hstate *h, * is not the case is if a reserve map was changed between calls. It * is the responsibility of the caller to notice the difference and * take appropriate action. + * + * vma_add_reservation is used in error paths where a reservation must + * be restored when a newly allocated huge page must be freed. It is + * to be called after calling vma_needs_reservation to determine if a + * reservation exists. */ enum vma_resv_mode { VMA_NEEDS_RESV, VMA_COMMIT_RESV, VMA_END_RESV, + VMA_ADD_RESV, }; static long __vma_reservation_common(struct hstate *h, struct vm_area_struct *vma, unsigned long addr, @@ -1856,6 +1862,14 @@ static long __vma_reservation_common(struct hstate *h, region_abort(resv, idx, idx + 1); ret = 0; break; + case VMA_ADD_RESV: + if (vma->vm_flags & VM_MAYSHARE) + ret = region_add(resv, idx, idx + 1); + else { + region_abort(resv, idx, idx + 1); + ret = region_del(resv, idx, idx + 1); + } + break; default: BUG(); } @@ -1903,6 +1917,56 @@ static void vma_end_reservation(struct hstate *h, (void)__vma_reservation_common(h, vma, addr, VMA_END_RESV); } +static long vma_add_reservation(struct hstate *h, + struct vm_area_struct *vma, unsigned long addr) +{ + return __vma_reservation_common(h, vma, addr, VMA_ADD_RESV); +} + +/* + * This routine is called to restore a reservation on error paths. In the + * specific error paths, a huge page was allocated (via alloc_huge_page) + * and is about to be freed. If a reservation for the page existed, + * alloc_huge_page would have consumed the reservation and set PagePrivate + * in the newly allocated page. When the page is freed via free_huge_page, + * the global reservation count will be incremented if PagePrivate is set. + * However, free_huge_page can not adjust the reserve map. Adjust the + * reserve map here to be consistent with global reserve count adjustments + * to be made by free_huge_page. + */ +static void restore_reserve_on_error(struct hstate *h, + struct vm_area_struct *vma, unsigned long address, + struct page *page) +{ + if (unlikely(PagePrivate(page))) { + long rc = vma_needs_reservation(h, vma, address); + + if (unlikely(rc < 0)) { + /* + * Rare out of memory condition in reserve map + * manipulation. Clear PagePrivate so that + * global reserve count will not be incremented + * by free_huge_page. This will make it appear + * as though the reservation for this page was + * consumed. This may prevent the task from + * faulting in the page at a later time. This + * is better than inconsistent global huge page + * accounting of reserve counts. + */ + ClearPagePrivate(page); + } else if (rc) { + rc = vma_add_reservation(h, vma, address); + if (unlikely(rc < 0)) + /* + * See above comment about rare out of + * memory condition. + */ + ClearPagePrivate(page); + } else + vma_end_reservation(h, vma, address); + } +} + struct page *alloc_huge_page(struct vm_area_struct *vma, unsigned long addr, int avoid_reserve) { @@ -3498,6 +3562,7 @@ retry_avoidcopy: spin_unlock(ptl); mmu_notifier_invalidate_range_end(mm, mmun_start, mmun_end); out_release_all: + restore_reserve_on_error(h, vma, address, new_page); put_page(new_page); out_release_old: put_page(old_page); @@ -3680,6 +3745,7 @@ backout: spin_unlock(ptl); backout_unlocked: unlock_page(page); + restore_reserve_on_error(h, vma, address, page); put_page(page); goto out; } From 60da81ea61201f43387793d1cc3f501609d922ed Mon Sep 17 00:00:00 2001 From: Eryu Guan Date: Thu, 10 Nov 2016 10:46:35 -0800 Subject: [PATCH 540/792] mm/filemap: don't allow partially uptodate page for pipes Starting from 4.9-rc1 kernel, I started noticing some test failures of sendfile(2) and splice(2) (sendfile0N and splice01 from LTP) when testing on sub-page block size filesystems (tested both XFS and ext4), these syscalls start to return EIO in the tests. e.g. sendfile02 1 TFAIL : sendfile02.c:133: sendfile(2) failed to return expected value, expected: 26, got: -1 sendfile02 2 TFAIL : sendfile02.c:133: sendfile(2) failed to return expected value, expected: 24, got: -1 sendfile02 3 TFAIL : sendfile02.c:133: sendfile(2) failed to return expected value, expected: 22, got: -1 sendfile02 4 TFAIL : sendfile02.c:133: sendfile(2) failed to return expected value, expected: 20, got: -1 This is because that in sub-page block size cases, we don't need the whole page to be uptodate, only the part we care about is uptodate is OK (if fs has ->is_partially_uptodate defined). But page_cache_pipe_buf_confirm() doesn't have the ability to check the partially-uptodate case, it needs the whole page to be uptodate. So it returns EIO in this case. This is a regression introduced by commit 82c156f85384 ("switch generic_file_splice_read() to use of ->read_iter()"). Prior to the change, generic_file_splice_read() doesn't allow partially-uptodate page either, so it worked fine. Fix it by skipping the partially-uptodate check if we're working on a pipe in do_generic_file_read(), so we read the whole page from disk as long as the page is not uptodate. I think the other way to fix it is to add the ability to check & allow partially-uptodate page to page_cache_pipe_buf_confirm(), but that is much harder to do and seems gain little. Link: http://lkml.kernel.org/r/1477986187-12717-1-git-send-email-guaneryu@gmail.com Signed-off-by: Eryu Guan Reviewed-by: Jan Kara Cc: Al Viro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/filemap.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/mm/filemap.c b/mm/filemap.c index c7fe2f16503f..50b52fe51937 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -1732,6 +1732,9 @@ find_page: if (inode->i_blkbits == PAGE_SHIFT || !mapping->a_ops->is_partially_uptodate) goto page_not_up_to_date; + /* pipes can't handle partially uptodate pages */ + if (unlikely(iter->type & ITER_PIPE)) + goto page_not_up_to_date; if (!trylock_page(page)) goto page_not_up_to_date; /* Did it get truncated before we got the lock? */ From 70d78fe7c8b640b5acfad56ad341985b3810998a Mon Sep 17 00:00:00 2001 From: Andrey Ryabinin Date: Thu, 10 Nov 2016 10:46:38 -0800 Subject: [PATCH 541/792] coredump: fix unfreezable coredumping task It could be not possible to freeze coredumping task when it waits for 'core_state->startup' completion, because threads are frozen in get_signal() before they got a chance to complete 'core_state->startup'. Inability to freeze a task during suspend will cause suspend to fail. Also CRIU uses cgroup freezer during dump operation. So with an unfreezable task the CRIU dump will fail because it waits for a transition from 'FREEZING' to 'FROZEN' state which will never happen. Use freezer_do_not_count() to tell freezer to ignore coredumping task while it waits for core_state->startup completion. Link: http://lkml.kernel.org/r/1475225434-3753-1-git-send-email-aryabinin@virtuozzo.com Signed-off-by: Andrey Ryabinin Acked-by: Pavel Machek Acked-by: Oleg Nesterov Cc: Alexander Viro Cc: Tejun Heo Cc: "Rafael J. Wysocki" Cc: Michal Hocko Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/coredump.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/coredump.c b/fs/coredump.c index 281b768000e6..eb9c92c9b20f 100644 --- a/fs/coredump.c +++ b/fs/coredump.c @@ -1,6 +1,7 @@ #include #include #include +#include #include #include #include @@ -423,7 +424,9 @@ static int coredump_wait(int exit_code, struct core_state *core_state) if (core_waiters > 0) { struct core_thread *ptr; + freezer_do_not_count(); wait_for_completion(&core_state->startup); + freezer_count(); /* * Wait for all the threads to become inactive, so that * all the thread context (extended register state, like From f773e36de3d77c4000ca914c9d146f55f2fd51e8 Mon Sep 17 00:00:00 2001 From: Greg Thelen Date: Thu, 10 Nov 2016 10:46:41 -0800 Subject: [PATCH 542/792] memcg: prevent memcg caches to be both OFF_SLAB & OBJFREELIST_SLAB While testing OBJFREELIST_SLAB integration with pagealloc, we found a bug where kmem_cache(sys) would be created with both CFLGS_OFF_SLAB & CFLGS_OBJFREELIST_SLAB. When it happened, critical allocations needed for loading drivers or creating new caches will fail. The original kmem_cache is created early making OFF_SLAB not possible. When kmem_cache(sys) is created, OFF_SLAB is possible and if pagealloc is enabled it will try to enable it first under certain conditions. Given kmem_cache(sys) reuses the original flag, you can have both flags at the same time resulting in allocation failures and odd behaviors. This fix discards allocator specific flags from memcg before calling create_cache. The bug exists since 4.6-rc1 and affects testing debug pagealloc configurations. Fixes: b03a017bebc4 ("mm/slab: introduce new slab management type, OBJFREELIST_SLAB") Link: http://lkml.kernel.org/r/1478553075-120242-1-git-send-email-thgarnie@google.com Signed-off-by: Greg Thelen Signed-off-by: Thomas Garnier Tested-by: Thomas Garnier Acked-by: Christoph Lameter Cc: Pekka Enberg Cc: David Rientjes Cc: Joonsoo Kim Cc: Vladimir Davydov Cc: Michal Hocko Cc: Johannes Weiner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/slab_common.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/mm/slab_common.c b/mm/slab_common.c index 71f0b28a1bec..329b03843863 100644 --- a/mm/slab_common.c +++ b/mm/slab_common.c @@ -533,8 +533,8 @@ void memcg_create_kmem_cache(struct mem_cgroup *memcg, s = create_cache(cache_name, root_cache->object_size, root_cache->size, root_cache->align, - root_cache->flags, root_cache->ctor, - memcg, root_cache); + root_cache->flags & CACHE_CREATE_MASK, + root_cache->ctor, memcg, root_cache); /* * If we could not create a memcg cache, do not complain, because * that's not critical at all as we can always proceed with the root From d7c19b066dcf4bd19c4385e8065558d4e74f9e73 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Thu, 10 Nov 2016 10:46:44 -0800 Subject: [PATCH 543/792] mm: kmemleak: scan .data.ro_after_init Limit the number of kmemleak false positives by including .data.ro_after_init in memory scanning. To achieve this we need to add symbols for start and end of the section to the linker scripts. The problem was been uncovered by commit 56989f6d8568 ("genetlink: mark families as __ro_after_init"). Link: http://lkml.kernel.org/r/1478274173-15218-1-git-send-email-jakub.kicinski@netronome.com Reviewed-by: Catalin Marinas Signed-off-by: Jakub Kicinski Cc: Arnd Bergmann Cc: Cong Wang Cc: Johannes Berg Cc: Martin Schwidefsky Cc: Heiko Carstens Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/s390/kernel/vmlinux.lds.S | 2 ++ include/asm-generic/sections.h | 3 +++ include/asm-generic/vmlinux.lds.h | 5 ++++- mm/kmemleak.c | 1 + 4 files changed, 10 insertions(+), 1 deletion(-) diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S index 000e6e91f6a0..3667d20e997f 100644 --- a/arch/s390/kernel/vmlinux.lds.S +++ b/arch/s390/kernel/vmlinux.lds.S @@ -62,9 +62,11 @@ SECTIONS . = ALIGN(PAGE_SIZE); __start_ro_after_init = .; + __start_data_ro_after_init = .; .data..ro_after_init : { *(.data..ro_after_init) } + __end_data_ro_after_init = .; EXCEPTION_TABLE(16) . = ALIGN(PAGE_SIZE); __end_ro_after_init = .; diff --git a/include/asm-generic/sections.h b/include/asm-generic/sections.h index af0254c09424..4df64a1fc09e 100644 --- a/include/asm-generic/sections.h +++ b/include/asm-generic/sections.h @@ -14,6 +14,8 @@ * [_sdata, _edata]: contains .data.* sections, may also contain .rodata.* * and/or .init.* sections. * [__start_rodata, __end_rodata]: contains .rodata.* sections + * [__start_data_ro_after_init, __end_data_ro_after_init]: + * contains data.ro_after_init section * [__init_begin, __init_end]: contains .init.* sections, but .init.text.* * may be out of this range on some architectures. * [_sinittext, _einittext]: contains .init.text.* sections @@ -31,6 +33,7 @@ extern char _data[], _sdata[], _edata[]; extern char __bss_start[], __bss_stop[]; extern char __init_begin[], __init_end[]; extern char _sinittext[], _einittext[]; +extern char __start_data_ro_after_init[], __end_data_ro_after_init[]; extern char _end[]; extern char __per_cpu_load[], __per_cpu_start[], __per_cpu_end[]; extern char __kprobes_text_start[], __kprobes_text_end[]; diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h index 30747960bc54..31e1d639abed 100644 --- a/include/asm-generic/vmlinux.lds.h +++ b/include/asm-generic/vmlinux.lds.h @@ -259,7 +259,10 @@ * own by defining an empty RO_AFTER_INIT_DATA. */ #ifndef RO_AFTER_INIT_DATA -#define RO_AFTER_INIT_DATA *(.data..ro_after_init) +#define RO_AFTER_INIT_DATA \ + __start_data_ro_after_init = .; \ + *(.data..ro_after_init) \ + __end_data_ro_after_init = .; #endif /* diff --git a/mm/kmemleak.c b/mm/kmemleak.c index e5355a5b423f..d1380ed93fdf 100644 --- a/mm/kmemleak.c +++ b/mm/kmemleak.c @@ -1414,6 +1414,7 @@ static void kmemleak_scan(void) /* data/bss scanning */ scan_large_block(_sdata, _edata); scan_large_block(__bss_start, __bss_stop); + scan_large_block(__start_data_ro_after_init, __end_data_ro_after_init); #ifdef CONFIG_SMP /* per-cpu sections scanning */ From ae65a21fb851f09bf6341761d884fb86b644b75a Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Thu, 10 Nov 2016 10:46:47 -0800 Subject: [PATCH 544/792] lib/stackdepot: export save/fetch stack for drivers Some drivers would like to record stacktraces in order to aide leak tracing. As stackdepot already provides a facility for only storing the unique traces, thereby reducing the memory required, export that functionality for use by drivers. The code was originally created for KASAN and moved under lib in commit cd11016e5f521 ("mm, kasan: stackdepot implementation. Enable stackdepot for SLAB") so that it could be shared with mm/. In turn, we want to share it now with drivers. Link: http://lkml.kernel.org/r/20161108133209.22704-1-chris@chris-wilson.co.uk Signed-off-by: Chris Wilson Cc: Andrey Ryabinin Cc: Alexander Potapenko Cc: Dmitry Vyukov Cc: Joonsoo Kim Cc: "Kirill A. Shutemov" Cc: Daniel Vetter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- lib/stackdepot.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/lib/stackdepot.c b/lib/stackdepot.c index 4d830e299989..f87d138e9672 100644 --- a/lib/stackdepot.c +++ b/lib/stackdepot.c @@ -192,6 +192,7 @@ void depot_fetch_stack(depot_stack_handle_t handle, struct stack_trace *trace) trace->entries = stack->entries; trace->skip = 0; } +EXPORT_SYMBOL_GPL(depot_fetch_stack); /** * depot_save_stack - save stack in a stack depot. @@ -283,3 +284,4 @@ exit: fast_exit: return retval; } +EXPORT_SYMBOL_GPL(depot_save_stack); From a76bcf557ef408b368cf26f52a60865bfc27b632 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 10 Nov 2016 17:44:44 +0100 Subject: [PATCH 545/792] Kbuild: enable -Wmaybe-uninitialized warning for "make W=1" Traditionally, we have always had warnings about uninitialized variables enabled, as this is part of -Wall, and generally a good idea [1], but it also always produced false positives, mainly because this is a variation of the halting problem and provably impossible to get right in all cases [2]. Various people have identified cases that are particularly bad for false positives, and in commit e74fc973b6e5 ("Turn off -Wmaybe-uninitialized when building with -Os"), I turned off the warning for any build that was done with CC_OPTIMIZE_FOR_SIZE. This drastically reduced the number of false positive warnings in the default build but unfortunately had the side effect of turning the warning off completely in 'allmodconfig' builds, which in turn led to a lot of warnings (both actual bugs, and remaining false positives) to go in unnoticed. With commit 877417e6ffb9 ("Kbuild: change CC_OPTIMIZE_FOR_SIZE definition") enabled the warning again for allmodconfig builds in v4.7 and in v4.8-rc1, I had finally managed to address all warnings I get in an ARM allmodconfig build and most other maybe-uninitialized warnings for ARM randconfig builds. However, commit 6e8d666e9253 ("Disable "maybe-uninitialized" warning globally") was merged at the same time and disabled it completely for all configurations, because of false-positive warnings on x86 that I had not addressed until then. This caused a lot of actual bugs to get merged into mainline, and I sent several dozen patches for these during the v4.9 development cycle. Most of these are actual bugs, some are for correct code that is safe because it is only called under external constraints that make it impossible to run into the case that gcc sees, and in a few cases gcc is just stupid and finds something that can obviously never happen. I have now done a few thousand randconfig builds on x86 and collected all patches that I needed to address every single warning I got (I can provide the combined patch for the other warnings if anyone is interested), so I hope we can get the warning back and let people catch the actual bugs earlier. This reverts the change to disable the warning completely and for now brings it back at the "make W=1" level, so we can get it merged into mainline without introducing false positives. A follow-up patch enables it on all levels unless some configuration option turns it off because of false-positives. Link: https://rusty.ozlabs.org/?p=232 [1] Link: https://gcc.gnu.org/wiki/Better_Uninitialized_Warnings [2] Signed-off-by: Arnd Bergmann Signed-off-by: Linus Torvalds --- Makefile | 10 ++++++---- arch/arc/Makefile | 4 +++- scripts/Makefile.extrawarn | 3 +++ scripts/Makefile.ubsan | 4 ++++ 4 files changed, 16 insertions(+), 5 deletions(-) diff --git a/Makefile b/Makefile index f97f786de58d..06e2b73978e8 100644 --- a/Makefile +++ b/Makefile @@ -370,7 +370,7 @@ LDFLAGS_MODULE = CFLAGS_KERNEL = AFLAGS_KERNEL = LDFLAGS_vmlinux = -CFLAGS_GCOV = -fprofile-arcs -ftest-coverage -fno-tree-loop-im +CFLAGS_GCOV = -fprofile-arcs -ftest-coverage -fno-tree-loop-im -Wno-maybe-uninitialized CFLAGS_KCOV := $(call cc-option,-fsanitize-coverage=trace-pc,) @@ -620,7 +620,6 @@ ARCH_CFLAGS := include arch/$(SRCARCH)/Makefile KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks,) -KBUILD_CFLAGS += $(call cc-disable-warning,maybe-uninitialized,) KBUILD_CFLAGS += $(call cc-disable-warning,frame-address,) ifdef CONFIG_LD_DEAD_CODE_DATA_ELIMINATION @@ -629,15 +628,18 @@ KBUILD_CFLAGS += $(call cc-option,-fdata-sections,) endif ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE -KBUILD_CFLAGS += -Os +KBUILD_CFLAGS += -Os $(call cc-disable-warning,maybe-uninitialized,) else ifdef CONFIG_PROFILE_ALL_BRANCHES -KBUILD_CFLAGS += -O2 +KBUILD_CFLAGS += -O2 $(call cc-disable-warning,maybe-uninitialized,) else KBUILD_CFLAGS += -O2 endif endif +KBUILD_CFLAGS += $(call cc-ifversion, -lt, 0409, \ + $(call cc-disable-warning,maybe-uninitialized,)) + # Tell gcc to never replace conditional load with a non-conditional one KBUILD_CFLAGS += $(call cc-option,--param=allow-store-data-races=0) diff --git a/arch/arc/Makefile b/arch/arc/Makefile index 864adad52280..25f81a1db9f9 100644 --- a/arch/arc/Makefile +++ b/arch/arc/Makefile @@ -68,7 +68,9 @@ cflags-$(CONFIG_ARC_DW2_UNWIND) += -fasynchronous-unwind-tables $(cfi) ifndef CONFIG_CC_OPTIMIZE_FOR_SIZE # Generic build system uses -O2, we want -O3 # Note: No need to add to cflags-y as that happens anyways -ARCH_CFLAGS += -O3 +# +# Disable the false maybe-uninitialized warings gcc spits out at -O3 +ARCH_CFLAGS += -O3 $(call cc-disable-warning,maybe-uninitialized,) endif # small data is default for elf32 tool-chain. If not usable, disable it diff --git a/scripts/Makefile.extrawarn b/scripts/Makefile.extrawarn index 53449a6ff6aa..7fc2c5a3dbbe 100644 --- a/scripts/Makefile.extrawarn +++ b/scripts/Makefile.extrawarn @@ -36,6 +36,7 @@ warning-2 += -Wshadow warning-2 += $(call cc-option, -Wlogical-op) warning-2 += $(call cc-option, -Wmissing-field-initializers) warning-2 += $(call cc-option, -Wsign-compare) +warning-2 += $(call cc-option, -Wmaybe-uninitialized) warning-3 := -Wbad-function-cast warning-3 += -Wcast-qual @@ -59,6 +60,8 @@ endif KBUILD_CFLAGS += $(warning) else +KBUILD_CFLAGS += $(call cc-disable-warning, maybe-uninitialized) + ifeq ($(cc-name),clang) KBUILD_CFLAGS += $(call cc-disable-warning, initializer-overrides) KBUILD_CFLAGS += $(call cc-disable-warning, unused-value) diff --git a/scripts/Makefile.ubsan b/scripts/Makefile.ubsan index dd779c40c8e6..3b1b13818d59 100644 --- a/scripts/Makefile.ubsan +++ b/scripts/Makefile.ubsan @@ -17,4 +17,8 @@ endif ifdef CONFIG_UBSAN_NULL CFLAGS_UBSAN += $(call cc-option, -fsanitize=null) endif + + # -fsanitize=* options makes GCC less smart than usual and + # increase number of 'maybe-uninitialized false-positives + CFLAGS_UBSAN += $(call cc-option, -Wno-maybe-uninitialized) endif From e84efa32b9d2763fb92e73c8942100d8f55ad4ed Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 10 Nov 2016 17:44:45 +0100 Subject: [PATCH 546/792] NFSv4.1: work around -Wmaybe-uninitialized warning A bugfix introduced a harmless gcc warning in nfs4_slot_seqid_in_use if we enable -Wmaybe-uninitialized again: fs/nfs/nfs4session.c:203:54: error: 'cur_seq' may be used uninitialized in this function [-Werror=maybe-uninitialized] gcc is not smart enough to conclude that the IS_ERR/PTR_ERR pair results in a nonzero return value here. Using PTR_ERR_OR_ZERO() instead makes this clear to the compiler. Fixes: e09c978aae5b ("NFSv4.1: Fix Oopsable condition in server callback races") Signed-off-by: Arnd Bergmann Signed-off-by: Linus Torvalds --- fs/nfs/nfs4session.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/fs/nfs/nfs4session.c b/fs/nfs/nfs4session.c index b62973045a3e..150c5a1879bf 100644 --- a/fs/nfs/nfs4session.c +++ b/fs/nfs/nfs4session.c @@ -178,12 +178,14 @@ static int nfs4_slot_get_seqid(struct nfs4_slot_table *tbl, u32 slotid, __must_hold(&tbl->slot_tbl_lock) { struct nfs4_slot *slot; + int ret; slot = nfs4_lookup_slot(tbl, slotid); - if (IS_ERR(slot)) - return PTR_ERR(slot); - *seq_nr = slot->seq_nr; - return 0; + ret = PTR_ERR_OR_ZERO(slot); + if (!ret) + *seq_nr = slot->seq_nr; + + return ret; } /* From 3a6d867612dce2035ca50cb02e7871d27c86aa72 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 10 Nov 2016 17:44:46 +0100 Subject: [PATCH 547/792] x86: apm: avoid uninitialized data MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit apm_bios_call() can fail, and return a status in its argument structure. If that status however is zero during a call from apm_get_power_status(), we end up using data that may have never been set, as reported by "gcc -Wmaybe-uninitialized": arch/x86/kernel/apm_32.c: In function ‘apm’: arch/x86/kernel/apm_32.c:1729:17: error: ‘bx’ may be used uninitialized in this function [-Werror=maybe-uninitialized] arch/x86/kernel/apm_32.c:1835:5: error: ‘cx’ may be used uninitialized in this function [-Werror=maybe-uninitialized] arch/x86/kernel/apm_32.c:1730:17: note: ‘cx’ was declared here arch/x86/kernel/apm_32.c:1842:27: error: ‘dx’ may be used uninitialized in this function [-Werror=maybe-uninitialized] arch/x86/kernel/apm_32.c:1731:17: note: ‘dx’ was declared here This changes the function to return "APM_NO_ERROR" here, which makes the code more robust to broken BIOS versions, and avoids the warning. Signed-off-by: Arnd Bergmann Reviewed-by: Jiri Kosina Reviewed-by: Luis R. Rodriguez Signed-off-by: Linus Torvalds --- arch/x86/kernel/apm_32.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/apm_32.c b/arch/x86/kernel/apm_32.c index c7364bd633e1..51287cd90bf6 100644 --- a/arch/x86/kernel/apm_32.c +++ b/arch/x86/kernel/apm_32.c @@ -1042,8 +1042,11 @@ static int apm_get_power_status(u_short *status, u_short *bat, u_short *life) if (apm_info.get_power_status_broken) return APM_32_UNSUPPORTED; - if (apm_bios_call(&call)) + if (apm_bios_call(&call)) { + if (!call.err) + return APM_NO_ERROR; return call.err; + } *status = call.ebx; *bat = call.ecx; if (apm_info.get_power_status_swabinminutes) { From 069013a9e2bbf1ace3f796cb664023dcd40730f7 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 10 Nov 2016 17:44:47 +0100 Subject: [PATCH 548/792] nios2: fix timer initcall return value When called more than twice, the nios2_time_init() function return an uninitialized value, as detected by gcc -Wmaybe-uninitialized arch/nios2/kernel/time.c: warning: 'ret' may be used uninitialized in this function This makes it return '0' here, matching the comment above the function. Acked-by: Ley Foon Tan Signed-off-by: Arnd Bergmann Signed-off-by: Linus Torvalds --- arch/nios2/kernel/time.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/nios2/kernel/time.c b/arch/nios2/kernel/time.c index d9563ddb337e..746bf5caaffc 100644 --- a/arch/nios2/kernel/time.c +++ b/arch/nios2/kernel/time.c @@ -324,6 +324,7 @@ static int __init nios2_time_init(struct device_node *timer) ret = nios2_clocksource_init(timer); break; default: + ret = 0; break; } From 92dfffee974f75c28b0c89f31318669091de1ec3 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 10 Nov 2016 17:44:48 +0100 Subject: [PATCH 549/792] s390: pci: don't print uninitialized data for debugging gcc correctly warns about an incorrect use of the 'pa' variable in case we pass an empty scatterlist to __s390_dma_map_sg: arch/s390/pci/pci_dma.c: In function '__s390_dma_map_sg': arch/s390/pci/pci_dma.c:309:13: warning: 'pa' may be used uninitialized in this function [-Wmaybe-uninitialized] This adds a bogus initialization to the function to sanitize the debug output. I would have preferred a solution without the initialization, but I only got the report from the kbuild bot after turning on the warning again, and didn't manage to reproduce it myself. Signed-off-by: Arnd Bergmann Acked-by: Sebastian Ott Acked-by: Martin Schwidefsky Signed-off-by: Linus Torvalds --- arch/s390/pci/pci_dma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/s390/pci/pci_dma.c b/arch/s390/pci/pci_dma.c index 7350c8bc13a2..6b2f72f523b9 100644 --- a/arch/s390/pci/pci_dma.c +++ b/arch/s390/pci/pci_dma.c @@ -423,7 +423,7 @@ static int __s390_dma_map_sg(struct device *dev, struct scatterlist *sg, dma_addr_t dma_addr_base, dma_addr; int flags = ZPCI_PTE_VALID; struct scatterlist *s; - unsigned long pa; + unsigned long pa = 0; int ret; size = PAGE_ALIGN(size); From ba13e98f2cebd55a3744c5ffaa08f9dca73bf521 Mon Sep 17 00:00:00 2001 From: Sean Young Date: Thu, 10 Nov 2016 17:44:49 +0100 Subject: [PATCH 550/792] dib0700: fix nec repeat handling MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When receiving a nec repeat, ensure the correct scancode is repeated rather than a random value from the stack. This removes the need for the bogus uninitialized_var() and also fixes the warnings: drivers/media/usb/dvb-usb/dib0700_core.c: In function ‘dib0700_rc_urb_completion’: drivers/media/usb/dvb-usb/dib0700_core.c:679: warning: ‘protocol’ may be used uninitialized in this function [sean addon: So after writing the patch and submitting it, I've bought the hardware on ebay. Without this patch you get random scancodes on nec repeats, which the patch indeed fixes.] Signed-off-by: Sean Young Tested-by: Sean Young Cc: stable@vger.kernel.org Signed-off-by: Arnd Bergmann Signed-off-by: Linus Torvalds --- drivers/media/usb/dvb-usb/dib0700_core.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/media/usb/dvb-usb/dib0700_core.c b/drivers/media/usb/dvb-usb/dib0700_core.c index 92d5408684ac..47ce9d5de4c6 100644 --- a/drivers/media/usb/dvb-usb/dib0700_core.c +++ b/drivers/media/usb/dvb-usb/dib0700_core.c @@ -704,7 +704,7 @@ static void dib0700_rc_urb_completion(struct urb *purb) struct dvb_usb_device *d = purb->context; struct dib0700_rc_response *poll_reply; enum rc_type protocol; - u32 uninitialized_var(keycode); + u32 keycode; u8 toggle; deb_info("%s()\n", __func__); @@ -745,7 +745,8 @@ static void dib0700_rc_urb_completion(struct urb *purb) poll_reply->nec.data == 0x00 && poll_reply->nec.not_data == 0xff) { poll_reply->data_state = 2; - break; + rc_repeat(d->rc_dev); + goto resubmit; } if ((poll_reply->nec.data ^ poll_reply->nec.not_data) != 0xff) { From 9cdbe14fb468586454d26d7ff878e7b698449727 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 10 Nov 2016 17:44:50 +0100 Subject: [PATCH 551/792] rc: print correct variable for z8f0811 A recent rework accidentally left a debugging printk untouched while changing the meaning of the variables, leading to an uninitialized variable being printed: drivers/media/i2c/ir-kbd-i2c.c: In function 'get_key_haup_common': drivers/media/i2c/ir-kbd-i2c.c:62:2: error: 'toggle' may be used uninitialized in this function [-Werror=maybe-uninitialized] This prints the correct one instead, as we did before the patch. Fixes: 00bb820755ed ("[media] rc: Hauppauge z8f0811 can decode RC6") Signed-off-by: Arnd Bergmann Signed-off-by: Linus Torvalds --- drivers/media/i2c/ir-kbd-i2c.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/i2c/ir-kbd-i2c.c b/drivers/media/i2c/ir-kbd-i2c.c index f95a6bc839d5..cede3975d04b 100644 --- a/drivers/media/i2c/ir-kbd-i2c.c +++ b/drivers/media/i2c/ir-kbd-i2c.c @@ -118,7 +118,7 @@ static int get_key_haup_common(struct IR_i2c *ir, enum rc_type *protocol, *protocol = RC_TYPE_RC6_MCE; dev &= 0x7f; dprintk(1, "ir hauppauge (rc6-mce): t%d vendor=%d dev=%d code=%d\n", - toggle, vendor, dev, code); + *ptoggle, vendor, dev, code); } else { *ptoggle = 0; *protocol = RC_TYPE_RC6_6A_32; From beae2c9eb500d5509feb9fd148d34d97a9b1d276 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 10 Nov 2016 17:44:51 +0100 Subject: [PATCH 552/792] crypto: aesni: shut up -Wmaybe-uninitialized warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The rfc4106 encrypy/decrypt helper functions cause an annoying false-positive warning in allmodconfig if we turn on -Wmaybe-uninitialized warnings again: arch/x86/crypto/aesni-intel_glue.c: In function ‘helper_rfc4106_decrypt’: include/linux/scatterlist.h:67:31: warning: ‘dst_sg_walk.sg’ may be used uninitialized in this function [-Wmaybe-uninitialized] The problem seems to be that the compiler doesn't track the state of the 'one_entry_in_sg' variable across the kernel_fpu_begin/kernel_fpu_end section. This takes the easy way out by adding a bogus initialization, which should be harmless enough to get the patch into v4.9 so we can turn on this warning again by default without producing useless output. A follow-up patch for v4.10 rearranges the code to make the warning go away. Signed-off-by: Arnd Bergmann Signed-off-by: Linus Torvalds --- arch/x86/crypto/aesni-intel_glue.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/crypto/aesni-intel_glue.c b/arch/x86/crypto/aesni-intel_glue.c index 0ab5ee1c26af..aa8b0672f87a 100644 --- a/arch/x86/crypto/aesni-intel_glue.c +++ b/arch/x86/crypto/aesni-intel_glue.c @@ -888,7 +888,7 @@ static int helper_rfc4106_encrypt(struct aead_request *req) unsigned long auth_tag_len = crypto_aead_authsize(tfm); u8 iv[16] __attribute__ ((__aligned__(AESNI_ALIGN))); struct scatter_walk src_sg_walk; - struct scatter_walk dst_sg_walk; + struct scatter_walk dst_sg_walk = {}; unsigned int i; /* Assuming we are supporting rfc4106 64-bit extended */ @@ -968,7 +968,7 @@ static int helper_rfc4106_decrypt(struct aead_request *req) u8 iv[16] __attribute__ ((__aligned__(AESNI_ALIGN))); u8 authTag[16]; struct scatter_walk src_sg_walk; - struct scatter_walk dst_sg_walk; + struct scatter_walk dst_sg_walk = {}; unsigned int i; if (unlikely(req->assoclen != 16 && req->assoclen != 20)) From c50e90d0d2bc489901c9adb825609cbbb2f7ffa1 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 10 Nov 2016 17:44:52 +0100 Subject: [PATCH 553/792] infiniband: shut up a maybe-uninitialized warning Some configurations produce this harmless warning when built with gcc -Wmaybe-uninitialized: infiniband/core/cma.c: In function 'cma_get_net_dev': infiniband/core/cma.c:1242:12: warning: 'src_addr_storage.sin_addr.s_addr' may be used uninitialized in this function [-Wmaybe-uninitialized] I previously reported this for the powerpc64 defconfig, but have now reproduced the same thing for x86 as well, using gcc-5 or higher. The code looks correct to me, and this change just rearranges it by making sure we alway initialize the entire address structure to make the warning disappear. My first approach added an initialization at the time of the declaration, which Doug commented may be too costly, so I hope this version doesn't add overhead. Link: http://arm-soc.lixom.net/buildlogs/mainline/v4.7-rc6/buildall.powerpc.ppc64_defconfig.log.passed Link: https://patchwork.kernel.org/patch/9212825/ Acked-by: Haggai Eran Signed-off-by: Arnd Bergmann Signed-off-by: Linus Torvalds --- drivers/infiniband/core/cma.c | 54 ++++++++++++++++++----------------- 1 file changed, 28 insertions(+), 26 deletions(-) diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index 36bf50ebb187..89a6b0546804 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -1094,47 +1094,47 @@ static void cma_save_ib_info(struct sockaddr *src_addr, } } -static void cma_save_ip4_info(struct sockaddr *src_addr, - struct sockaddr *dst_addr, +static void cma_save_ip4_info(struct sockaddr_in *src_addr, + struct sockaddr_in *dst_addr, struct cma_hdr *hdr, __be16 local_port) { - struct sockaddr_in *ip4; - if (src_addr) { - ip4 = (struct sockaddr_in *)src_addr; - ip4->sin_family = AF_INET; - ip4->sin_addr.s_addr = hdr->dst_addr.ip4.addr; - ip4->sin_port = local_port; + *src_addr = (struct sockaddr_in) { + .sin_family = AF_INET, + .sin_addr.s_addr = hdr->dst_addr.ip4.addr, + .sin_port = local_port, + }; } if (dst_addr) { - ip4 = (struct sockaddr_in *)dst_addr; - ip4->sin_family = AF_INET; - ip4->sin_addr.s_addr = hdr->src_addr.ip4.addr; - ip4->sin_port = hdr->port; + *dst_addr = (struct sockaddr_in) { + .sin_family = AF_INET, + .sin_addr.s_addr = hdr->src_addr.ip4.addr, + .sin_port = hdr->port, + }; } } -static void cma_save_ip6_info(struct sockaddr *src_addr, - struct sockaddr *dst_addr, +static void cma_save_ip6_info(struct sockaddr_in6 *src_addr, + struct sockaddr_in6 *dst_addr, struct cma_hdr *hdr, __be16 local_port) { - struct sockaddr_in6 *ip6; - if (src_addr) { - ip6 = (struct sockaddr_in6 *)src_addr; - ip6->sin6_family = AF_INET6; - ip6->sin6_addr = hdr->dst_addr.ip6; - ip6->sin6_port = local_port; + *src_addr = (struct sockaddr_in6) { + .sin6_family = AF_INET6, + .sin6_addr = hdr->dst_addr.ip6, + .sin6_port = local_port, + }; } if (dst_addr) { - ip6 = (struct sockaddr_in6 *)dst_addr; - ip6->sin6_family = AF_INET6; - ip6->sin6_addr = hdr->src_addr.ip6; - ip6->sin6_port = hdr->port; + *dst_addr = (struct sockaddr_in6) { + .sin6_family = AF_INET6, + .sin6_addr = hdr->src_addr.ip6, + .sin6_port = hdr->port, + }; } } @@ -1159,10 +1159,12 @@ static int cma_save_ip_info(struct sockaddr *src_addr, switch (cma_get_ip_ver(hdr)) { case 4: - cma_save_ip4_info(src_addr, dst_addr, hdr, port); + cma_save_ip4_info((struct sockaddr_in *)src_addr, + (struct sockaddr_in *)dst_addr, hdr, port); break; case 6: - cma_save_ip6_info(src_addr, dst_addr, hdr, port); + cma_save_ip6_info((struct sockaddr_in6 *)src_addr, + (struct sockaddr_in6 *)dst_addr, hdr, port); break; default: return -EAFNOSUPPORT; From 75ed26878b4cc0ca1c9d8ed5a642b45b60c231d9 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 10 Nov 2016 17:44:53 +0100 Subject: [PATCH 554/792] pcmcia: fix return value of soc_pcmcia_regulator_set The newly introduced soc_pcmcia_regulator_set() function sometimes returns without setting its return code, as shown by this warning: drivers/pcmcia/soc_common.c: In function 'soc_pcmcia_regulator_set': drivers/pcmcia/soc_common.c:112:5: error: 'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized] This changes it to propagate the regulator_disable() result instead. Fixes: ac61b6001a63 ("pcmcia: soc_common: add support for Vcc and Vpp regulators") Signed-off-by: Arnd Bergmann Signed-off-by: Linus Torvalds --- drivers/pcmcia/soc_common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c index 153f3122283d..b6b316de055c 100644 --- a/drivers/pcmcia/soc_common.c +++ b/drivers/pcmcia/soc_common.c @@ -107,7 +107,7 @@ int soc_pcmcia_regulator_set(struct soc_pcmcia_socket *skt, ret = regulator_enable(r->reg); } else { - regulator_disable(r->reg); + ret = regulator_disable(r->reg); } if (ret == 0) r->on = on; From 4324cb23f4569edcf76e637cdb3c1dfe8e8a85e4 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 10 Nov 2016 17:44:54 +0100 Subject: [PATCH 555/792] Kbuild: enable -Wmaybe-uninitialized warnings by default Previously the warnings were added back at the W=1 level and above, this now turns them on again by default, assuming that we have addressed all warnings and again have a clean build for v4.10. I found a number of new warnings in linux-next already and submitted bugfixes for those. Hopefully they are caught by the 0day builder in the future as soon as this patch is merged. Signed-off-by: Arnd Bergmann Signed-off-by: Linus Torvalds --- scripts/Makefile.extrawarn | 2 -- 1 file changed, 2 deletions(-) diff --git a/scripts/Makefile.extrawarn b/scripts/Makefile.extrawarn index 7fc2c5a3dbbe..7c321a603b07 100644 --- a/scripts/Makefile.extrawarn +++ b/scripts/Makefile.extrawarn @@ -60,8 +60,6 @@ endif KBUILD_CFLAGS += $(warning) else -KBUILD_CFLAGS += $(call cc-disable-warning, maybe-uninitialized) - ifeq ($(cc-name),clang) KBUILD_CFLAGS += $(call cc-disable-warning, initializer-overrides) KBUILD_CFLAGS += $(call cc-disable-warning, unused-value) From 409ae5a76e0505c8ffe1424f9c00dbf2ec7b5eea Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Matias=20Bj=C3=B8rling?= Date: Thu, 10 Nov 2016 12:26:57 +0100 Subject: [PATCH 556/792] lightnvm: invalid offset calculation for lba_shift MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The ns->lba_shift assumes its value to be the logarithmic of the LA size. A previous patch duplicated the lba_shift calculation into lightnvm. It prematurely also subtracted a 512byte shift, which commonly is applied per-command. The 512byte shift being subtracted twice led to data loss when restoring the logical to physical mapping table from device and when issuing I/O commands using rrpc. Fix offset by removing the 512byte shift subtraction when calculating lba_shift. Fixes: b0b4e09c1ae7 "lightnvm: control life of nvm_dev in driver" Reported-by: Javier González Signed-off-by: Matias Bjørling Signed-off-by: Jens Axboe --- drivers/nvme/host/lightnvm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/nvme/host/lightnvm.c b/drivers/nvme/host/lightnvm.c index f5e3011e31fc..5daf2f4be0cd 100644 --- a/drivers/nvme/host/lightnvm.c +++ b/drivers/nvme/host/lightnvm.c @@ -612,7 +612,7 @@ int nvme_nvm_register(struct nvme_ns *ns, char *disk_name, int node, ret = nvm_register(dev); - ns->lba_shift = ilog2(dev->sec_size) - 9; + ns->lba_shift = ilog2(dev->sec_size); if (sysfs_create_group(&dev->dev.kobj, attrs)) pr_warn("%s: failed to create sysfs group for identification\n", From f23ed166f283b1a6f0a1f0b0c889e8df9a10ff85 Mon Sep 17 00:00:00 2001 From: Nicholas Piggin Date: Wed, 2 Nov 2016 17:57:01 +1100 Subject: [PATCH 557/792] powerpc/64s: Fix system reset interrupt winkle wakeups Wakeups from winkle set the low bit of the HSPRG0 register, to distinguish it from other sleep states. This is also the PACA pointer. The system reset exception handler fails to mask this bit away before using this value before using it as the PACA pointer. Fix this by adding a new type of exception prolog macro where we already have the PACA set in r13, and have the system reset vector mask it out. The winkle wakeup handler will store the masked value back into HSPRG0. Fixes: fb479e44a9e2 ("powerpc/64s: relocation, register save fixes for system reset interrupt") Cc: stable@vger.kernel.org # v3.0+ Signed-off-by: Nicholas Piggin Reviewed-by: Mahesh Salgaonkar Signed-off-by: Michael Ellerman --- arch/powerpc/include/asm/exception-64s.h | 13 +++++++++++-- arch/powerpc/kernel/exceptions-64s.S | 11 ++++++++--- 2 files changed, 19 insertions(+), 5 deletions(-) diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h index 84d49b197c32..3ce43664eadf 100644 --- a/arch/powerpc/include/asm/exception-64s.h +++ b/arch/powerpc/include/asm/exception-64s.h @@ -158,14 +158,17 @@ BEGIN_FTR_SECTION_NESTED(943) \ std ra,offset(r13); \ END_FTR_SECTION_NESTED(ftr,ftr,943) -#define EXCEPTION_PROLOG_0(area) \ - GET_PACA(r13); \ +#define EXCEPTION_PROLOG_0_PACA(area) \ std r9,area+EX_R9(r13); /* save r9 */ \ OPT_GET_SPR(r9, SPRN_PPR, CPU_FTR_HAS_PPR); \ HMT_MEDIUM; \ std r10,area+EX_R10(r13); /* save r10 - r12 */ \ OPT_GET_SPR(r10, SPRN_CFAR, CPU_FTR_CFAR) +#define EXCEPTION_PROLOG_0(area) \ + GET_PACA(r13); \ + EXCEPTION_PROLOG_0_PACA(area) + #define __EXCEPTION_PROLOG_1(area, extra, vec) \ OPT_SAVE_REG_TO_PACA(area+EX_PPR, r9, CPU_FTR_HAS_PPR); \ OPT_SAVE_REG_TO_PACA(area+EX_CFAR, r10, CPU_FTR_CFAR); \ @@ -196,6 +199,12 @@ END_FTR_SECTION_NESTED(ftr,ftr,943) EXCEPTION_PROLOG_1(area, extra, vec); \ EXCEPTION_PROLOG_PSERIES_1(label, h); +/* Have the PACA in r13 already */ +#define EXCEPTION_PROLOG_PSERIES_PACA(area, label, h, extra, vec) \ + EXCEPTION_PROLOG_0_PACA(area); \ + EXCEPTION_PROLOG_1(area, extra, vec); \ + EXCEPTION_PROLOG_PSERIES_1(label, h); + #define __KVMTEST(h, n) \ lbz r10,HSTATE_IN_GUEST(r13); \ cmpwi r10,0; \ diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index 08ba447a4b3d..1ba82ea90230 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -116,7 +116,9 @@ EXC_VIRT_NONE(0x4000, 0x4100) EXC_REAL_BEGIN(system_reset, 0x100, 0x200) SET_SCRATCH0(r13) - EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common, EXC_STD, + GET_PACA(r13) + clrrdi r13,r13,1 /* Last bit of HSPRG0 is set if waking from winkle */ + EXCEPTION_PROLOG_PSERIES_PACA(PACA_EXGEN, system_reset_common, EXC_STD, IDLETEST, 0x100) EXC_REAL_END(system_reset, 0x100, 0x200) @@ -124,6 +126,9 @@ EXC_VIRT_NONE(0x4100, 0x4200) #ifdef CONFIG_PPC_P7_NAP EXC_COMMON_BEGIN(system_reset_idle_common) +BEGIN_FTR_SECTION + GET_PACA(r13) /* Restore HSPRG0 to get the winkle bit in r13 */ +END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_300) bl pnv_restore_hyp_resource li r0,PNV_THREAD_RUNNING @@ -169,7 +174,7 @@ EXC_REAL_BEGIN(machine_check, 0x200, 0x300) SET_SCRATCH0(r13) /* save r13 */ /* * Running native on arch 2.06 or later, we may wakeup from winkle - * inside machine check. If yes, then last bit of HSPGR0 would be set + * inside machine check. If yes, then last bit of HSPRG0 would be set * to 1. Hence clear it unconditionally. */ GET_PACA(r13) @@ -388,7 +393,7 @@ EXC_COMMON_BEGIN(machine_check_handle_early) /* * Go back to winkle. Please note that this thread was woken up in * machine check from winkle and have not restored the per-subcore - * state. Hence before going back to winkle, set last bit of HSPGR0 + * state. Hence before going back to winkle, set last bit of HSPRG0 * to 1. This will make sure that if this thread gets woken up * again at reset vector 0x100 then it will get chance to restore * the subcore state. From e6740ae631db02e4f3a6742e2a38ea63718d8d17 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Mon, 7 Nov 2016 22:28:21 -0800 Subject: [PATCH 558/792] powerpc: Fix exception vector build with 2.23 era binutils The changes to use gas sections for constructing the exception vectors causes a build break when using binutils 2.23: arch/powerpc/kernel/exceptions-64s.S:770: Error: operand out of range (0xffffffffffff8100 is not between 0x0000000000000000 and 0x000000000000ffff) And so on. Reported by Hugh with binutils-2.23.2-8.1.4.ppc64 from openSUSE 13.1 and also Naveen & Denis using 2.23.52.0.1-26.el7 from RHEL 7. Strangely binutils 2.22 (what I test with) is not affected. This is caused by the use of @l in LOAD_HANDLER(). The @l was only recently added in commit a24553dd02dc ("powerpc/pseries: Remove unnecessary syscall trampoline"). Luckily the gas section changes split out the LOAD_SYSCALL_HANDLER() macro, which means we actually *don't* need to use @l in LOAD_HANDLER() any more, only in LOAD_SYSCALL_HANDLER(). So drop the @l from LOAD_HANDLER(). Fixes: 57f266497d81 ("powerpc: Use gas sections for arranging exception vectors") Signed-off-by: Hugh Dickins [mpe: Add gory details to change log] Signed-off-by: Michael Ellerman --- arch/powerpc/include/asm/exception-64s.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h index 3ce43664eadf..9a3eee661297 100644 --- a/arch/powerpc/include/asm/exception-64s.h +++ b/arch/powerpc/include/asm/exception-64s.h @@ -91,7 +91,7 @@ */ #define LOAD_HANDLER(reg, label) \ ld reg,PACAKBASE(r13); /* get high part of &label */ \ - ori reg,reg,(FIXED_SYMBOL_ABS_ADDR(label))@l; + ori reg,reg,FIXED_SYMBOL_ABS_ADDR(label); #define __LOAD_HANDLER(reg, label) \ ld reg,PACAKBASE(r13); \ From 9a1f490f358e44a1cf463ba8124ca39fcc042992 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 2 Nov 2016 22:20:46 +1100 Subject: [PATCH 559/792] powerpc/oops: Fix missing pr_cont()s in show_stack() Previously we got away with printing the stack trace in multiple pieces and it usually looked right. But since commit 4bcc595ccd80 ("printk: reinstate KERN_CONT for printing continuation lines"), KERN_CONT is now required when printing continuation lines. Use pr_cont() as appropriate. Signed-off-by: Michael Ellerman --- arch/powerpc/kernel/process.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index ce6dc61b15b2..621d9b23df72 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -1900,14 +1900,14 @@ void show_stack(struct task_struct *tsk, unsigned long *stack) printk("["REG"] ["REG"] %pS", sp, ip, (void *)ip); #ifdef CONFIG_FUNCTION_GRAPH_TRACER if ((ip == rth) && curr_frame >= 0) { - printk(" (%pS)", + pr_cont(" (%pS)", (void *)current->ret_stack[curr_frame].ret); curr_frame--; } #endif if (firstframe) - printk(" (unreliable)"); - printk("\n"); + pr_cont(" (unreliable)"); + pr_cont("\n"); } firstframe = 0; From db5ba5ae6e8d5374429212de8e20933a8a0ce52e Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 2 Nov 2016 22:20:47 +1100 Subject: [PATCH 560/792] powerpc/oops: Fix missing pr_cont()s in print_msr_bits() et. al. Since the KERN_CONT changes these are being horribly split across lines, for example: MSR: 8000000000009033 < SF,EE ,ME,IR ,DR,RI ,LE> So fix it by using pr_cont() where appropriate. Signed-off-by: Michael Ellerman --- arch/powerpc/kernel/process.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 621d9b23df72..38f85d7a1e06 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -1282,7 +1282,7 @@ static void print_bits(unsigned long val, struct regbit *bits, const char *sep) for (; bits->bit; ++bits) if (val & bits->bit) { - printk("%s%s", s, bits->name); + pr_cont("%s%s", s, bits->name); s = sep; } } @@ -1305,9 +1305,9 @@ static void print_tm_bits(unsigned long val) * T: Transactional (bit 34) */ if (val & (MSR_TM | MSR_TS_S | MSR_TS_T)) { - printk(",TM["); + pr_cont(",TM["); print_bits(val, msr_tm_bits, ""); - printk("]"); + pr_cont("]"); } } #else @@ -1316,10 +1316,10 @@ static void print_tm_bits(unsigned long val) {} static void print_msr_bits(unsigned long val) { - printk("<"); + pr_cont("<"); print_bits(val, msr_bits, ","); print_tm_bits(val); - printk(">"); + pr_cont(">"); } #ifdef CONFIG_PPC64 From 7dae865f5878fc0c2edfb3b9165712ef33ce03df Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 3 Nov 2016 20:45:26 +1100 Subject: [PATCH 561/792] powerpc/oops: Fix missing pr_cont()s in show_regs() Fix up our oops output by converting continuation lines to use pr_cont(). Some of these are dubious, eg. printing a continuation line which starts with a newline, but seem to work OK for now. This whole function needs a rewrite in the next release. Signed-off-by: Michael Ellerman --- arch/powerpc/kernel/process.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 38f85d7a1e06..6fe8fa481f8a 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -1347,29 +1347,29 @@ void show_regs(struct pt_regs * regs) printk(" CR: %08lx XER: %08lx\n", regs->ccr, regs->xer); trap = TRAP(regs); if ((regs->trap != 0xc00) && cpu_has_feature(CPU_FTR_CFAR)) - printk("CFAR: "REG" ", regs->orig_gpr3); + pr_cont("CFAR: "REG" ", regs->orig_gpr3); if (trap == 0x200 || trap == 0x300 || trap == 0x600) #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE) - printk("DEAR: "REG" ESR: "REG" ", regs->dar, regs->dsisr); + pr_cont("DEAR: "REG" ESR: "REG" ", regs->dar, regs->dsisr); #else - printk("DAR: "REG" DSISR: %08lx ", regs->dar, regs->dsisr); + pr_cont("DAR: "REG" DSISR: %08lx ", regs->dar, regs->dsisr); #endif #ifdef CONFIG_PPC64 - printk("SOFTE: %ld ", regs->softe); + pr_cont("SOFTE: %ld ", regs->softe); #endif #ifdef CONFIG_PPC_TRANSACTIONAL_MEM if (MSR_TM_ACTIVE(regs->msr)) - printk("\nPACATMSCRATCH: %016llx ", get_paca()->tm_scratch); + pr_cont("\nPACATMSCRATCH: %016llx ", get_paca()->tm_scratch); #endif for (i = 0; i < 32; i++) { if ((i % REGS_PER_LINE) == 0) - printk("\nGPR%02d: ", i); - printk(REG " ", regs->gpr[i]); + pr_cont("\nGPR%02d: ", i); + pr_cont(REG " ", regs->gpr[i]); if (i == LAST_VOLATILE && !FULL_REGS(regs)) break; } - printk("\n"); + pr_cont("\n"); #ifdef CONFIG_KALLSYMS /* * Lookup NIP late so we have the best change of getting the From 2ffd04dee0dacff36c03a02434965a96da032bcd Mon Sep 17 00:00:00 2001 From: Andrew Donnellan Date: Fri, 4 Nov 2016 17:20:40 +1100 Subject: [PATCH 562/792] powerpc/oops: Fix missing pr_cont()s in instruction dump Since the KERN_CONT changes, the current code in show_instructions() prints out a whole bunch of unnecessary newlines. Change occurrences of printk("\n") to pr_cont("\n"). While we're here, change all the other cases of printk(KERN_CONT ...) to pr_cont() as well. Signed-off-by: Andrew Donnellan Signed-off-by: Michael Ellerman --- arch/powerpc/kernel/process.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 6fe8fa481f8a..49a680d5ae37 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -1215,7 +1215,7 @@ static void show_instructions(struct pt_regs *regs) int instr; if (!(i % 8)) - printk("\n"); + pr_cont("\n"); #if !defined(CONFIG_BOOKE) /* If executing with the IMMU off, adjust pc rather @@ -1227,18 +1227,18 @@ static void show_instructions(struct pt_regs *regs) if (!__kernel_text_address(pc) || probe_kernel_address((unsigned int __user *)pc, instr)) { - printk(KERN_CONT "XXXXXXXX "); + pr_cont("XXXXXXXX "); } else { if (regs->nip == pc) - printk(KERN_CONT "<%08x> ", instr); + pr_cont("<%08x> ", instr); else - printk(KERN_CONT "%08x ", instr); + pr_cont("%08x ", instr); } pc += sizeof(int); } - printk("\n"); + pr_cont("\n"); } struct regbit { From 18f6084a989ba1b38702f9af37a2e4049a924be6 Mon Sep 17 00:00:00 2001 From: Andrey Grodzovsky Date: Thu, 10 Nov 2016 09:35:27 -0500 Subject: [PATCH 563/792] scsi: mpt3sas: Fix secure erase premature termination This is a work around for a bug with LSI Fusion MPT SAS2 when perfoming secure erase. Due to the very long time the operation takes, commands issued during the erase will time out and will trigger execution of the abort hook. Even though the abort hook is called for the specific command which timed out, this leads to entire device halt (scsi_state terminated) and premature termination of the secure erase. Set device state to busy while ATA passthrough commands are in progress. [mkp: hand applied to 4.9/scsi-fixes, tweaked patch description] Signed-off-by: Andrey Grodzovsky Acked-by: Sreekanth Reddy Cc: Cc: Sathya Prakash Cc: Chaitra P B Cc: Suganath Prabu Subramani Cc: Sreekanth Reddy Cc: Hannes Reinecke Cc: Signed-off-by: Martin K. Petersen --- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 8aa769a2d919..91b70bc46e7f 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -4010,7 +4010,10 @@ _scsih_eedp_error_handling(struct scsi_cmnd *scmd, u16 ioc_status) SAM_STAT_CHECK_CONDITION; } - +static inline bool ata_12_16_cmd(struct scsi_cmnd *scmd) +{ + return (scmd->cmnd[0] == ATA_12 || scmd->cmnd[0] == ATA_16); +} /** * scsih_qcmd - main scsi request entry point @@ -4038,6 +4041,13 @@ scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd) if (ioc->logging_level & MPT_DEBUG_SCSI) scsi_print_command(scmd); + /* + * Lock the device for any subsequent command until command is + * done. + */ + if (ata_12_16_cmd(scmd)) + scsi_internal_device_block(scmd->device); + sas_device_priv_data = scmd->device->hostdata; if (!sas_device_priv_data || !sas_device_priv_data->sas_target) { scmd->result = DID_NO_CONNECT << 16; @@ -4613,6 +4623,9 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) if (scmd == NULL) return 1; + if (ata_12_16_cmd(scmd)) + scsi_internal_device_unblock(scmd->device, SDEV_RUNNING); + mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); if (mpi_reply == NULL) { From 0cbc72a1781250f373327dd7e306e33859a42154 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 11 Nov 2016 18:28:50 -0700 Subject: [PATCH 564/792] aoe: fix crash in page count manipulation aoeblk contains some mysterious code, that wants to elevate the bio vec page counts while it's under IO. That is not needed, it's fragile, and it's causing kernel oopses for some. Reported-by: Tested-by: Don Koch Tested-by: Tested-by: Don Koch Signed-off-by: Jens Axboe --- drivers/block/aoe/aoecmd.c | 41 -------------------------------------- 1 file changed, 41 deletions(-) diff --git a/drivers/block/aoe/aoecmd.c b/drivers/block/aoe/aoecmd.c index ab19adb07a12..3c606c09fd5a 100644 --- a/drivers/block/aoe/aoecmd.c +++ b/drivers/block/aoe/aoecmd.c @@ -853,45 +853,6 @@ rqbiocnt(struct request *r) return n; } -/* This can be removed if we are certain that no users of the block - * layer will ever use zero-count pages in bios. Otherwise we have to - * protect against the put_page sometimes done by the network layer. - * - * See http://oss.sgi.com/archives/xfs/2007-01/msg00594.html for - * discussion. - * - * We cannot use get_page in the workaround, because it insists on a - * positive page count as a precondition. So we use _refcount directly. - */ -static void -bio_pageinc(struct bio *bio) -{ - struct bio_vec bv; - struct page *page; - struct bvec_iter iter; - - bio_for_each_segment(bv, bio, iter) { - /* Non-zero page count for non-head members of - * compound pages is no longer allowed by the kernel. - */ - page = compound_head(bv.bv_page); - page_ref_inc(page); - } -} - -static void -bio_pagedec(struct bio *bio) -{ - struct page *page; - struct bio_vec bv; - struct bvec_iter iter; - - bio_for_each_segment(bv, bio, iter) { - page = compound_head(bv.bv_page); - page_ref_dec(page); - } -} - static void bufinit(struct buf *buf, struct request *rq, struct bio *bio) { @@ -899,7 +860,6 @@ bufinit(struct buf *buf, struct request *rq, struct bio *bio) buf->rq = rq; buf->bio = bio; buf->iter = bio->bi_iter; - bio_pageinc(bio); } static struct buf * @@ -1127,7 +1087,6 @@ aoe_end_buf(struct aoedev *d, struct buf *buf) if (buf == d->ip.buf) d->ip.buf = NULL; rq = buf->rq; - bio_pagedec(buf->bio); mempool_free(buf, d->bufpool); n = (unsigned long) rq->special; rq->special = (void *) --n; From 4e3264d21b90984c2165e8fe5a7b64cf25bc2c2d Mon Sep 17 00:00:00 2001 From: Martin KaFai Lau Date: Wed, 9 Nov 2016 15:36:33 -0800 Subject: [PATCH 565/792] bpf: Fix bpf_redirect to an ipip/ip6tnl dev If the bpf program calls bpf_redirect(dev, 0) and dev is an ipip/ip6tnl, it currently includes the mac header. e.g. If dev is ipip, the end result is IP-EthHdr-IP instead of IP-IP. The fix is to pull the mac header. At ingress, skb_postpull_rcsum() is not needed because the ethhdr should have been pulled once already and then got pushed back just before calling the bpf_prog. At egress, this patch calls skb_postpull_rcsum(). If bpf_redirect(dev, BPF_F_INGRESS) is called, it also fails now because it calls dev_forward_skb() which eventually calls eth_type_trans(skb, dev). The eth_type_trans() will set skb->type = PACKET_OTHERHOST because the mac address does not match the redirecting dev->dev_addr. The PACKET_OTHERHOST will eventually cause the ip_rcv() errors out. To fix this, ____dev_forward_skb() is added. Joint work with Daniel Borkmann. Fixes: cfc7381b3002 ("ip_tunnel: add collect_md mode to IPIP tunnel") Fixes: 8d79266bc48c ("ip6_tunnel: add collect_md mode to IPv6 tunnels") Acked-by: Daniel Borkmann Acked-by: Alexei Starovoitov Signed-off-by: Martin KaFai Lau Signed-off-by: David S. Miller --- include/linux/netdevice.h | 15 +++++++++ net/core/dev.c | 17 ++++------ net/core/filter.c | 68 ++++++++++++++++++++++++++++++++++----- 3 files changed, 81 insertions(+), 19 deletions(-) diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 91ee3643ccc8..bf04a46f6d5b 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -3354,6 +3354,21 @@ int dev_forward_skb(struct net_device *dev, struct sk_buff *skb); bool is_skb_forwardable(const struct net_device *dev, const struct sk_buff *skb); +static __always_inline int ____dev_forward_skb(struct net_device *dev, + struct sk_buff *skb) +{ + if (skb_orphan_frags(skb, GFP_ATOMIC) || + unlikely(!is_skb_forwardable(dev, skb))) { + atomic_long_inc(&dev->rx_dropped); + kfree_skb(skb); + return NET_RX_DROP; + } + + skb_scrub_packet(skb, true); + skb->priority = 0; + return 0; +} + void dev_queue_xmit_nit(struct sk_buff *skb, struct net_device *dev); extern int netdev_budget; diff --git a/net/core/dev.c b/net/core/dev.c index eaad4c28069f..6666b28b6815 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1766,19 +1766,14 @@ EXPORT_SYMBOL_GPL(is_skb_forwardable); int __dev_forward_skb(struct net_device *dev, struct sk_buff *skb) { - if (skb_orphan_frags(skb, GFP_ATOMIC) || - unlikely(!is_skb_forwardable(dev, skb))) { - atomic_long_inc(&dev->rx_dropped); - kfree_skb(skb); - return NET_RX_DROP; + int ret = ____dev_forward_skb(dev, skb); + + if (likely(!ret)) { + skb->protocol = eth_type_trans(skb, dev); + skb_postpull_rcsum(skb, eth_hdr(skb), ETH_HLEN); } - skb_scrub_packet(skb, true); - skb->priority = 0; - skb->protocol = eth_type_trans(skb, dev); - skb_postpull_rcsum(skb, eth_hdr(skb), ETH_HLEN); - - return 0; + return ret; } EXPORT_SYMBOL_GPL(__dev_forward_skb); diff --git a/net/core/filter.c b/net/core/filter.c index 00351cdf7d0c..b391209838ef 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -1628,6 +1628,19 @@ static inline int __bpf_rx_skb(struct net_device *dev, struct sk_buff *skb) return dev_forward_skb(dev, skb); } +static inline int __bpf_rx_skb_no_mac(struct net_device *dev, + struct sk_buff *skb) +{ + int ret = ____dev_forward_skb(dev, skb); + + if (likely(!ret)) { + skb->dev = dev; + ret = netif_rx(skb); + } + + return ret; +} + static inline int __bpf_tx_skb(struct net_device *dev, struct sk_buff *skb) { int ret; @@ -1647,6 +1660,51 @@ static inline int __bpf_tx_skb(struct net_device *dev, struct sk_buff *skb) return ret; } +static int __bpf_redirect_no_mac(struct sk_buff *skb, struct net_device *dev, + u32 flags) +{ + /* skb->mac_len is not set on normal egress */ + unsigned int mlen = skb->network_header - skb->mac_header; + + __skb_pull(skb, mlen); + + /* At ingress, the mac header has already been pulled once. + * At egress, skb_pospull_rcsum has to be done in case that + * the skb is originated from ingress (i.e. a forwarded skb) + * to ensure that rcsum starts at net header. + */ + if (!skb_at_tc_ingress(skb)) + skb_postpull_rcsum(skb, skb_mac_header(skb), mlen); + skb_pop_mac_header(skb); + skb_reset_mac_len(skb); + return flags & BPF_F_INGRESS ? + __bpf_rx_skb_no_mac(dev, skb) : __bpf_tx_skb(dev, skb); +} + +static int __bpf_redirect_common(struct sk_buff *skb, struct net_device *dev, + u32 flags) +{ + bpf_push_mac_rcsum(skb); + return flags & BPF_F_INGRESS ? + __bpf_rx_skb(dev, skb) : __bpf_tx_skb(dev, skb); +} + +static int __bpf_redirect(struct sk_buff *skb, struct net_device *dev, + u32 flags) +{ + switch (dev->type) { + case ARPHRD_TUNNEL: + case ARPHRD_TUNNEL6: + case ARPHRD_SIT: + case ARPHRD_IPGRE: + case ARPHRD_VOID: + case ARPHRD_NONE: + return __bpf_redirect_no_mac(skb, dev, flags); + default: + return __bpf_redirect_common(skb, dev, flags); + } +} + BPF_CALL_3(bpf_clone_redirect, struct sk_buff *, skb, u32, ifindex, u64, flags) { struct net_device *dev; @@ -1675,10 +1733,7 @@ BPF_CALL_3(bpf_clone_redirect, struct sk_buff *, skb, u32, ifindex, u64, flags) return -ENOMEM; } - bpf_push_mac_rcsum(clone); - - return flags & BPF_F_INGRESS ? - __bpf_rx_skb(dev, clone) : __bpf_tx_skb(dev, clone); + return __bpf_redirect(clone, dev, flags); } static const struct bpf_func_proto bpf_clone_redirect_proto = { @@ -1722,10 +1777,7 @@ int skb_do_redirect(struct sk_buff *skb) return -EINVAL; } - bpf_push_mac_rcsum(skb); - - return ri->flags & BPF_F_INGRESS ? - __bpf_rx_skb(dev, skb) : __bpf_tx_skb(dev, skb); + return __bpf_redirect(skb, dev, ri->flags); } static const struct bpf_func_proto bpf_redirect_proto = { From 90e02896f1a4627b14624245fbcbc19f8fd916cb Mon Sep 17 00:00:00 2001 From: Martin KaFai Lau Date: Wed, 9 Nov 2016 15:36:34 -0800 Subject: [PATCH 566/792] bpf: Add test for bpf_redirect to ipip/ip6tnl The test creates two netns, ns1 and ns2. The host (the default netns) has an ipip or ip6tnl dev configured for tunneling traffic to the ns2. ping VIPS from ns1 <----> host <--tunnel--> ns2 (VIPs at loopback) The test is to have ns1 pinging VIPs configured at the loopback interface in ns2. The VIPs are 10.10.1.102 and 2401:face::66 (which are configured at lo@ns2). [Note: 0x66 => 102]. At ns1, the VIPs are routed _via_ the host. At the host, bpf programs are installed at the veth to redirect packets from a veth to the ipip/ip6tnl. The test is configured in a way so that both ingress and egress can be tested. At ns2, the ipip/ip6tnl dev is configured with the local and remote address specified. The return path is routed to the dev ipip/ip6tnl. During egress test, the host also locally tests pinging the VIPs to ensure that bpf_redirect at egress also works for the direct egress (i.e. not forwarding from dev ve1 to ve2). Acked-by: Alexei Starovoitov Signed-off-by: Martin KaFai Lau Signed-off-by: David S. Miller --- samples/bpf/Makefile | 4 + samples/bpf/tc_l2_redirect.sh | 173 ++++++++++++++++++++++ samples/bpf/tc_l2_redirect_kern.c | 236 ++++++++++++++++++++++++++++++ samples/bpf/tc_l2_redirect_user.c | 73 +++++++++ 4 files changed, 486 insertions(+) create mode 100755 samples/bpf/tc_l2_redirect.sh create mode 100644 samples/bpf/tc_l2_redirect_kern.c create mode 100644 samples/bpf/tc_l2_redirect_user.c diff --git a/samples/bpf/Makefile b/samples/bpf/Makefile index 12b7304d55dc..72c58675973e 100644 --- a/samples/bpf/Makefile +++ b/samples/bpf/Makefile @@ -27,6 +27,7 @@ hostprogs-y += xdp2 hostprogs-y += test_current_task_under_cgroup hostprogs-y += trace_event hostprogs-y += sampleip +hostprogs-y += tc_l2_redirect test_verifier-objs := test_verifier.o libbpf.o test_maps-objs := test_maps.o libbpf.o @@ -56,6 +57,7 @@ test_current_task_under_cgroup-objs := bpf_load.o libbpf.o \ test_current_task_under_cgroup_user.o trace_event-objs := bpf_load.o libbpf.o trace_event_user.o sampleip-objs := bpf_load.o libbpf.o sampleip_user.o +tc_l2_redirect-objs := bpf_load.o libbpf.o tc_l2_redirect_user.o # Tell kbuild to always build the programs always := $(hostprogs-y) @@ -72,6 +74,7 @@ always += test_probe_write_user_kern.o always += trace_output_kern.o always += tcbpf1_kern.o always += tcbpf2_kern.o +always += tc_l2_redirect_kern.o always += lathist_kern.o always += offwaketime_kern.o always += spintest_kern.o @@ -111,6 +114,7 @@ HOSTLOADLIBES_xdp2 += -lelf HOSTLOADLIBES_test_current_task_under_cgroup += -lelf HOSTLOADLIBES_trace_event += -lelf HOSTLOADLIBES_sampleip += -lelf +HOSTLOADLIBES_tc_l2_redirect += -l elf # Allows pointing LLC/CLANG to a LLVM backend with bpf support, redefine on cmdline: # make samples/bpf/ LLC=~/git/llvm/build/bin/llc CLANG=~/git/llvm/build/bin/clang diff --git a/samples/bpf/tc_l2_redirect.sh b/samples/bpf/tc_l2_redirect.sh new file mode 100755 index 000000000000..80a05591a140 --- /dev/null +++ b/samples/bpf/tc_l2_redirect.sh @@ -0,0 +1,173 @@ +#!/bin/bash + +[[ -z $TC ]] && TC='tc' +[[ -z $IP ]] && IP='ip' + +REDIRECT_USER='./tc_l2_redirect' +REDIRECT_BPF='./tc_l2_redirect_kern.o' + +RP_FILTER=$(< /proc/sys/net/ipv4/conf/all/rp_filter) +IPV6_FORWARDING=$(< /proc/sys/net/ipv6/conf/all/forwarding) + +function config_common { + local tun_type=$1 + + $IP netns add ns1 + $IP netns add ns2 + $IP link add ve1 type veth peer name vens1 + $IP link add ve2 type veth peer name vens2 + $IP link set dev ve1 up + $IP link set dev ve2 up + $IP link set dev ve1 mtu 1500 + $IP link set dev ve2 mtu 1500 + $IP link set dev vens1 netns ns1 + $IP link set dev vens2 netns ns2 + + $IP -n ns1 link set dev lo up + $IP -n ns1 link set dev vens1 up + $IP -n ns1 addr add 10.1.1.101/24 dev vens1 + $IP -n ns1 addr add 2401:db01::65/64 dev vens1 nodad + $IP -n ns1 route add default via 10.1.1.1 dev vens1 + $IP -n ns1 route add default via 2401:db01::1 dev vens1 + + $IP -n ns2 link set dev lo up + $IP -n ns2 link set dev vens2 up + $IP -n ns2 addr add 10.2.1.102/24 dev vens2 + $IP -n ns2 addr add 2401:db02::66/64 dev vens2 nodad + $IP -n ns2 addr add 10.10.1.102 dev lo + $IP -n ns2 addr add 2401:face::66/64 dev lo nodad + $IP -n ns2 link add ipt2 type ipip local 10.2.1.102 remote 10.2.1.1 + $IP -n ns2 link add ip6t2 type ip6tnl mode any local 2401:db02::66 remote 2401:db02::1 + $IP -n ns2 link set dev ipt2 up + $IP -n ns2 link set dev ip6t2 up + $IP netns exec ns2 $TC qdisc add dev vens2 clsact + $IP netns exec ns2 $TC filter add dev vens2 ingress bpf da obj $REDIRECT_BPF sec drop_non_tun_vip + if [[ $tun_type == "ipip" ]]; then + $IP -n ns2 route add 10.1.1.0/24 dev ipt2 + $IP netns exec ns2 sysctl -q -w net.ipv4.conf.all.rp_filter=0 + $IP netns exec ns2 sysctl -q -w net.ipv4.conf.ipt2.rp_filter=0 + else + $IP -n ns2 route add 10.1.1.0/24 dev ip6t2 + $IP -n ns2 route add 2401:db01::/64 dev ip6t2 + $IP netns exec ns2 sysctl -q -w net.ipv4.conf.all.rp_filter=0 + $IP netns exec ns2 sysctl -q -w net.ipv4.conf.ip6t2.rp_filter=0 + fi + + $IP addr add 10.1.1.1/24 dev ve1 + $IP addr add 2401:db01::1/64 dev ve1 nodad + $IP addr add 10.2.1.1/24 dev ve2 + $IP addr add 2401:db02::1/64 dev ve2 nodad + + $TC qdisc add dev ve2 clsact + $TC filter add dev ve2 ingress bpf da obj $REDIRECT_BPF sec l2_to_iptun_ingress_forward + + sysctl -q -w net.ipv4.conf.all.rp_filter=0 + sysctl -q -w net.ipv6.conf.all.forwarding=1 +} + +function cleanup { + set +e + [[ -z $DEBUG ]] || set +x + $IP netns delete ns1 >& /dev/null + $IP netns delete ns2 >& /dev/null + $IP link del ve1 >& /dev/null + $IP link del ve2 >& /dev/null + $IP link del ipt >& /dev/null + $IP link del ip6t >& /dev/null + sysctl -q -w net.ipv4.conf.all.rp_filter=$RP_FILTER + sysctl -q -w net.ipv6.conf.all.forwarding=$IPV6_FORWARDING + rm -f /sys/fs/bpf/tc/globals/tun_iface + [[ -z $DEBUG ]] || set -x + set -e +} + +function l2_to_ipip { + echo -n "l2_to_ipip $1: " + + local dir=$1 + + config_common ipip + + $IP link add ipt type ipip external + $IP link set dev ipt up + sysctl -q -w net.ipv4.conf.ipt.rp_filter=0 + sysctl -q -w net.ipv4.conf.ipt.forwarding=1 + + if [[ $dir == "egress" ]]; then + $IP route add 10.10.1.0/24 via 10.2.1.102 dev ve2 + $TC filter add dev ve2 egress bpf da obj $REDIRECT_BPF sec l2_to_iptun_ingress_redirect + sysctl -q -w net.ipv4.conf.ve1.forwarding=1 + else + $TC qdisc add dev ve1 clsact + $TC filter add dev ve1 ingress bpf da obj $REDIRECT_BPF sec l2_to_iptun_ingress_redirect + fi + + $REDIRECT_USER -U /sys/fs/bpf/tc/globals/tun_iface -i $(< /sys/class/net/ipt/ifindex) + + $IP netns exec ns1 ping -c1 10.10.1.102 >& /dev/null + + if [[ $dir == "egress" ]]; then + # test direct egress to ve2 (i.e. not forwarding from + # ve1 to ve2). + ping -c1 10.10.1.102 >& /dev/null + fi + + cleanup + + echo "OK" +} + +function l2_to_ip6tnl { + echo -n "l2_to_ip6tnl $1: " + + local dir=$1 + + config_common ip6tnl + + $IP link add ip6t type ip6tnl mode any external + $IP link set dev ip6t up + sysctl -q -w net.ipv4.conf.ip6t.rp_filter=0 + sysctl -q -w net.ipv4.conf.ip6t.forwarding=1 + + if [[ $dir == "egress" ]]; then + $IP route add 10.10.1.0/24 via 10.2.1.102 dev ve2 + $IP route add 2401:face::/64 via 2401:db02::66 dev ve2 + $TC filter add dev ve2 egress bpf da obj $REDIRECT_BPF sec l2_to_ip6tun_ingress_redirect + sysctl -q -w net.ipv4.conf.ve1.forwarding=1 + else + $TC qdisc add dev ve1 clsact + $TC filter add dev ve1 ingress bpf da obj $REDIRECT_BPF sec l2_to_ip6tun_ingress_redirect + fi + + $REDIRECT_USER -U /sys/fs/bpf/tc/globals/tun_iface -i $(< /sys/class/net/ip6t/ifindex) + + $IP netns exec ns1 ping -c1 10.10.1.102 >& /dev/null + $IP netns exec ns1 ping -6 -c1 2401:face::66 >& /dev/null + + if [[ $dir == "egress" ]]; then + # test direct egress to ve2 (i.e. not forwarding from + # ve1 to ve2). + ping -c1 10.10.1.102 >& /dev/null + ping -6 -c1 2401:face::66 >& /dev/null + fi + + cleanup + + echo "OK" +} + +cleanup +test_names="l2_to_ipip l2_to_ip6tnl" +test_dirs="ingress egress" +if [[ $# -ge 2 ]]; then + test_names=$1 + test_dirs=$2 +elif [[ $# -ge 1 ]]; then + test_names=$1 +fi + +for t in $test_names; do + for d in $test_dirs; do + $t $d + done +done diff --git a/samples/bpf/tc_l2_redirect_kern.c b/samples/bpf/tc_l2_redirect_kern.c new file mode 100644 index 000000000000..92a44729dbe4 --- /dev/null +++ b/samples/bpf/tc_l2_redirect_kern.c @@ -0,0 +1,236 @@ +/* Copyright (c) 2016 Facebook + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of version 2 of the GNU General Public + * License as published by the Free Software Foundation. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "bpf_helpers.h" + +#define _htonl __builtin_bswap32 + +#define PIN_GLOBAL_NS 2 +struct bpf_elf_map { + __u32 type; + __u32 size_key; + __u32 size_value; + __u32 max_elem; + __u32 flags; + __u32 id; + __u32 pinning; +}; + +/* copy of 'struct ethhdr' without __packed */ +struct eth_hdr { + unsigned char h_dest[ETH_ALEN]; + unsigned char h_source[ETH_ALEN]; + unsigned short h_proto; +}; + +struct bpf_elf_map SEC("maps") tun_iface = { + .type = BPF_MAP_TYPE_ARRAY, + .size_key = sizeof(int), + .size_value = sizeof(int), + .pinning = PIN_GLOBAL_NS, + .max_elem = 1, +}; + +static __always_inline bool is_vip_addr(__be16 eth_proto, __be32 daddr) +{ + if (eth_proto == htons(ETH_P_IP)) + return (_htonl(0xffffff00) & daddr) == _htonl(0x0a0a0100); + else if (eth_proto == htons(ETH_P_IPV6)) + return (daddr == _htonl(0x2401face)); + + return false; +} + +SEC("l2_to_iptun_ingress_forward") +int _l2_to_iptun_ingress_forward(struct __sk_buff *skb) +{ + struct bpf_tunnel_key tkey = {}; + void *data = (void *)(long)skb->data; + struct eth_hdr *eth = data; + void *data_end = (void *)(long)skb->data_end; + int key = 0, *ifindex; + + int ret; + + if (data + sizeof(*eth) > data_end) + return TC_ACT_OK; + + ifindex = bpf_map_lookup_elem(&tun_iface, &key); + if (!ifindex) + return TC_ACT_OK; + + if (eth->h_proto == htons(ETH_P_IP)) { + char fmt4[] = "ingress forward to ifindex:%d daddr4:%x\n"; + struct iphdr *iph = data + sizeof(*eth); + + if (data + sizeof(*eth) + sizeof(*iph) > data_end) + return TC_ACT_OK; + + if (iph->protocol != IPPROTO_IPIP) + return TC_ACT_OK; + + bpf_trace_printk(fmt4, sizeof(fmt4), *ifindex, + _htonl(iph->daddr)); + return bpf_redirect(*ifindex, BPF_F_INGRESS); + } else if (eth->h_proto == htons(ETH_P_IPV6)) { + char fmt6[] = "ingress forward to ifindex:%d daddr6:%x::%x\n"; + struct ipv6hdr *ip6h = data + sizeof(*eth); + + if (data + sizeof(*eth) + sizeof(*ip6h) > data_end) + return TC_ACT_OK; + + if (ip6h->nexthdr != IPPROTO_IPIP && + ip6h->nexthdr != IPPROTO_IPV6) + return TC_ACT_OK; + + bpf_trace_printk(fmt6, sizeof(fmt6), *ifindex, + _htonl(ip6h->daddr.s6_addr32[0]), + _htonl(ip6h->daddr.s6_addr32[3])); + return bpf_redirect(*ifindex, BPF_F_INGRESS); + } + + return TC_ACT_OK; +} + +SEC("l2_to_iptun_ingress_redirect") +int _l2_to_iptun_ingress_redirect(struct __sk_buff *skb) +{ + struct bpf_tunnel_key tkey = {}; + void *data = (void *)(long)skb->data; + struct eth_hdr *eth = data; + void *data_end = (void *)(long)skb->data_end; + int key = 0, *ifindex; + + int ret; + + if (data + sizeof(*eth) > data_end) + return TC_ACT_OK; + + ifindex = bpf_map_lookup_elem(&tun_iface, &key); + if (!ifindex) + return TC_ACT_OK; + + if (eth->h_proto == htons(ETH_P_IP)) { + char fmt4[] = "e/ingress redirect daddr4:%x to ifindex:%d\n"; + struct iphdr *iph = data + sizeof(*eth); + __be32 daddr = iph->daddr; + + if (data + sizeof(*eth) + sizeof(*iph) > data_end) + return TC_ACT_OK; + + if (!is_vip_addr(eth->h_proto, daddr)) + return TC_ACT_OK; + + bpf_trace_printk(fmt4, sizeof(fmt4), _htonl(daddr), *ifindex); + } else { + return TC_ACT_OK; + } + + tkey.tunnel_id = 10000; + tkey.tunnel_ttl = 64; + tkey.remote_ipv4 = 0x0a020166; /* 10.2.1.102 */ + bpf_skb_set_tunnel_key(skb, &tkey, sizeof(tkey), 0); + return bpf_redirect(*ifindex, 0); +} + +SEC("l2_to_ip6tun_ingress_redirect") +int _l2_to_ip6tun_ingress_redirect(struct __sk_buff *skb) +{ + struct bpf_tunnel_key tkey = {}; + void *data = (void *)(long)skb->data; + struct eth_hdr *eth = data; + void *data_end = (void *)(long)skb->data_end; + int key = 0, *ifindex; + + if (data + sizeof(*eth) > data_end) + return TC_ACT_OK; + + ifindex = bpf_map_lookup_elem(&tun_iface, &key); + if (!ifindex) + return TC_ACT_OK; + + if (eth->h_proto == htons(ETH_P_IP)) { + char fmt4[] = "e/ingress redirect daddr4:%x to ifindex:%d\n"; + struct iphdr *iph = data + sizeof(*eth); + + if (data + sizeof(*eth) + sizeof(*iph) > data_end) + return TC_ACT_OK; + + if (!is_vip_addr(eth->h_proto, iph->daddr)) + return TC_ACT_OK; + + bpf_trace_printk(fmt4, sizeof(fmt4), _htonl(iph->daddr), + *ifindex); + } else if (eth->h_proto == htons(ETH_P_IPV6)) { + char fmt6[] = "e/ingress redirect daddr6:%x to ifindex:%d\n"; + struct ipv6hdr *ip6h = data + sizeof(*eth); + + if (data + sizeof(*eth) + sizeof(*ip6h) > data_end) + return TC_ACT_OK; + + if (!is_vip_addr(eth->h_proto, ip6h->daddr.s6_addr32[0])) + return TC_ACT_OK; + + bpf_trace_printk(fmt6, sizeof(fmt6), + _htonl(ip6h->daddr.s6_addr32[0]), *ifindex); + } else { + return TC_ACT_OK; + } + + tkey.tunnel_id = 10000; + tkey.tunnel_ttl = 64; + /* 2401:db02:0:0:0:0:0:66 */ + tkey.remote_ipv6[0] = _htonl(0x2401db02); + tkey.remote_ipv6[1] = 0; + tkey.remote_ipv6[2] = 0; + tkey.remote_ipv6[3] = _htonl(0x00000066); + bpf_skb_set_tunnel_key(skb, &tkey, sizeof(tkey), BPF_F_TUNINFO_IPV6); + return bpf_redirect(*ifindex, 0); +} + +SEC("drop_non_tun_vip") +int _drop_non_tun_vip(struct __sk_buff *skb) +{ + struct bpf_tunnel_key tkey = {}; + void *data = (void *)(long)skb->data; + struct eth_hdr *eth = data; + void *data_end = (void *)(long)skb->data_end; + + if (data + sizeof(*eth) > data_end) + return TC_ACT_OK; + + if (eth->h_proto == htons(ETH_P_IP)) { + struct iphdr *iph = data + sizeof(*eth); + + if (data + sizeof(*eth) + sizeof(*iph) > data_end) + return TC_ACT_OK; + + if (is_vip_addr(eth->h_proto, iph->daddr)) + return TC_ACT_SHOT; + } else if (eth->h_proto == htons(ETH_P_IPV6)) { + struct ipv6hdr *ip6h = data + sizeof(*eth); + + if (data + sizeof(*eth) + sizeof(*ip6h) > data_end) + return TC_ACT_OK; + + if (is_vip_addr(eth->h_proto, ip6h->daddr.s6_addr32[0])) + return TC_ACT_SHOT; + } + + return TC_ACT_OK; +} + +char _license[] SEC("license") = "GPL"; diff --git a/samples/bpf/tc_l2_redirect_user.c b/samples/bpf/tc_l2_redirect_user.c new file mode 100644 index 000000000000..4013c5337b91 --- /dev/null +++ b/samples/bpf/tc_l2_redirect_user.c @@ -0,0 +1,73 @@ +/* Copyright (c) 2016 Facebook + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of version 2 of the GNU General Public + * License as published by the Free Software Foundation. + */ +#include +#include + +#include +#include +#include +#include +#include + +#include "libbpf.h" + +static void usage(void) +{ + printf("Usage: tc_l2_ipip_redirect [...]\n"); + printf(" -U Update an already pinned BPF array\n"); + printf(" -i Interface index\n"); + printf(" -h Display this help\n"); +} + +int main(int argc, char **argv) +{ + const char *pinned_file = NULL; + int ifindex = -1; + int array_key = 0; + int array_fd = -1; + int ret = -1; + int opt; + + while ((opt = getopt(argc, argv, "F:U:i:")) != -1) { + switch (opt) { + /* General args */ + case 'U': + pinned_file = optarg; + break; + case 'i': + ifindex = atoi(optarg); + break; + default: + usage(); + goto out; + } + } + + if (ifindex < 0 || !pinned_file) { + usage(); + goto out; + } + + array_fd = bpf_obj_get(pinned_file); + if (array_fd < 0) { + fprintf(stderr, "bpf_obj_get(%s): %s(%d)\n", + pinned_file, strerror(errno), errno); + goto out; + } + + /* bpf_tunnel_key.remote_ipv4 expects host byte orders */ + ret = bpf_update_elem(array_fd, &array_key, &ifindex, 0); + if (ret) { + perror("bpf_update_elem"); + goto out; + } + +out: + if (array_fd != -1) + close(array_fd); + return ret; +} From 34fad54c2537f7c99d07375e50cb30aa3c23bd83 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 9 Nov 2016 16:04:46 -0800 Subject: [PATCH 567/792] net: __skb_flow_dissect() must cap its return value After Tom patch, thoff field could point past the end of the buffer, this could fool some callers. If an skb was provided, skb->len should be the upper limit. If not, hlen is supposed to be the upper limit. Fixes: a6e544b0a88b ("flow_dissector: Jump to exit code in __skb_flow_dissect") Signed-off-by: Eric Dumazet Reported-by: Yibin Yang Acked-by: Willem de Bruijn Acked-by: Alexei Starovoitov Signed-off-by: David S. Miller --- net/core/flow_dissector.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/net/core/flow_dissector.c b/net/core/flow_dissector.c index ab193e5def07..69e4463a4b1b 100644 --- a/net/core/flow_dissector.c +++ b/net/core/flow_dissector.c @@ -122,7 +122,7 @@ bool __skb_flow_dissect(const struct sk_buff *skb, struct flow_dissector_key_keyid *key_keyid; bool skip_vlan = false; u8 ip_proto = 0; - bool ret = false; + bool ret; if (!data) { data = skb->data; @@ -549,12 +549,17 @@ ip_proto_again: out_good: ret = true; -out_bad: + key_control->thoff = (u16)nhoff; +out: key_basic->n_proto = proto; key_basic->ip_proto = ip_proto; - key_control->thoff = (u16)nhoff; return ret; + +out_bad: + ret = false; + key_control->thoff = min_t(u16, nhoff, skb ? skb->len : hlen); + goto out; } EXPORT_SYMBOL(__skb_flow_dissect); From 10b217681ddec4fa3ddb375bb188fec504523da4 Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Thu, 10 Nov 2016 13:21:42 +0200 Subject: [PATCH 568/792] net: bpqether.h: remove if_ether.h guard __LINUX_IF_ETHER_H is not defined anywhere, and if_ether.h can keep itself from double inclusion, though it uses a single underscore prefix. Signed-off-by: Baruch Siach Signed-off-by: David S. Miller --- include/uapi/linux/bpqether.h | 2 -- 1 file changed, 2 deletions(-) diff --git a/include/uapi/linux/bpqether.h b/include/uapi/linux/bpqether.h index a6c35e1a89ad..05865edaefda 100644 --- a/include/uapi/linux/bpqether.h +++ b/include/uapi/linux/bpqether.h @@ -5,9 +5,7 @@ * Defines for the BPQETHER pseudo device driver */ -#ifndef __LINUX_IF_ETHER_H #include -#endif #define SIOCSBPQETHOPT (SIOCDEVPRIVATE+0) /* reserved */ #define SIOCSBPQETHADDR (SIOCDEVPRIVATE+1) From 02e56902e40e4c1ff57590c717e46377b72d5966 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 12 Nov 2016 21:04:23 +0000 Subject: [PATCH 569/792] x86/efi: Fix EFI memmap pointer size warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix this when building on 32-bit: arch/x86/platform/efi/efi.c: In function ‘__efi_enter_virtual_mode’: arch/x86/platform/efi/efi.c:911:5: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] (efi_memory_desc_t *)pa); ^ arch/x86/platform/efi/efi.c:918:5: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] (efi_memory_desc_t *)pa); ^ The @pa local variable is declared as phys_addr_t and that is a u64 when CONFIG_PHYS_ADDR_T_64BIT=y. (The last is enabled on 32-bit on a PAE build.) However, its value comes from __pa() which is basically doing pointer arithmetic and checking, and returns unsigned long as it is the native pointer width. So let's use an unsigned long too. It should be fine to do so because the later users cast it to a pointer too. Signed-off-by: Borislav Petkov Signed-off-by: Matt Fleming Cc: Andy Lutomirski Cc: Ard Biesheuvel Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Josh Poimboeuf Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20161112210424.5157-2-matt@codeblueprint.co.uk Signed-off-by: Ingo Molnar --- arch/x86/platform/efi/efi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c index bf99aa7005eb..936a488d6cf6 100644 --- a/arch/x86/platform/efi/efi.c +++ b/arch/x86/platform/efi/efi.c @@ -861,7 +861,7 @@ static void __init __efi_enter_virtual_mode(void) int count = 0, pg_shift = 0; void *new_memmap = NULL; efi_status_t status; - phys_addr_t pa; + unsigned long pa; efi.systab = NULL; From f6697df36bdf0bf7fce984605c2918d4a7b4269f Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Sat, 12 Nov 2016 21:04:24 +0000 Subject: [PATCH 570/792] x86/efi: Prevent mixed mode boot corruption with CONFIG_VMAP_STACK=y Booting an EFI mixed mode kernel has been crashing since commit: e37e43a497d5 ("x86/mm/64: Enable vmapped stacks (CONFIG_HAVE_ARCH_VMAP_STACK=y)") The user-visible effect in my test setup was the kernel being unable to find the root file system ramdisk. This was likely caused by silent memory or page table corruption. Enabling CONFIG_DEBUG_VIRTUAL=y immediately flagged the thunking code as abusing virt_to_phys() because it was passing addresses that were not part of the kernel direct mapping. Use the slow version instead, which correctly handles all memory regions by performing a page table walk. Suggested-by: Andy Lutomirski Signed-off-by: Matt Fleming Cc: Andy Lutomirski Cc: Ard Biesheuvel Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Josh Poimboeuf Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/20161112210424.5157-3-matt@codeblueprint.co.uk Signed-off-by: Ingo Molnar --- arch/x86/platform/efi/efi_64.c | 80 ++++++++++++++++++++++++---------- 1 file changed, 57 insertions(+), 23 deletions(-) diff --git a/arch/x86/platform/efi/efi_64.c b/arch/x86/platform/efi/efi_64.c index 58b0f801f66f..319148bd4b05 100644 --- a/arch/x86/platform/efi/efi_64.c +++ b/arch/x86/platform/efi/efi_64.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include @@ -211,6 +212,35 @@ void efi_sync_low_kernel_mappings(void) memcpy(pud_efi, pud_k, sizeof(pud_t) * num_entries); } +/* + * Wrapper for slow_virt_to_phys() that handles NULL addresses. + */ +static inline phys_addr_t +virt_to_phys_or_null_size(void *va, unsigned long size) +{ + bool bad_size; + + if (!va) + return 0; + + if (virt_addr_valid(va)) + return virt_to_phys(va); + + /* + * A fully aligned variable on the stack is guaranteed not to + * cross a page bounary. Try to catch strings on the stack by + * checking that 'size' is a power of two. + */ + bad_size = size > PAGE_SIZE || !is_power_of_2(size); + + WARN_ON(!IS_ALIGNED((unsigned long)va, size) || bad_size); + + return slow_virt_to_phys(va); +} + +#define virt_to_phys_or_null(addr) \ + virt_to_phys_or_null_size((addr), sizeof(*(addr))) + int __init efi_setup_page_tables(unsigned long pa_memmap, unsigned num_pages) { unsigned long pfn, text; @@ -494,8 +524,8 @@ static efi_status_t efi_thunk_get_time(efi_time_t *tm, efi_time_cap_t *tc) spin_lock(&rtc_lock); - phys_tm = virt_to_phys(tm); - phys_tc = virt_to_phys(tc); + phys_tm = virt_to_phys_or_null(tm); + phys_tc = virt_to_phys_or_null(tc); status = efi_thunk(get_time, phys_tm, phys_tc); @@ -511,7 +541,7 @@ static efi_status_t efi_thunk_set_time(efi_time_t *tm) spin_lock(&rtc_lock); - phys_tm = virt_to_phys(tm); + phys_tm = virt_to_phys_or_null(tm); status = efi_thunk(set_time, phys_tm); @@ -529,9 +559,9 @@ efi_thunk_get_wakeup_time(efi_bool_t *enabled, efi_bool_t *pending, spin_lock(&rtc_lock); - phys_enabled = virt_to_phys(enabled); - phys_pending = virt_to_phys(pending); - phys_tm = virt_to_phys(tm); + phys_enabled = virt_to_phys_or_null(enabled); + phys_pending = virt_to_phys_or_null(pending); + phys_tm = virt_to_phys_or_null(tm); status = efi_thunk(get_wakeup_time, phys_enabled, phys_pending, phys_tm); @@ -549,7 +579,7 @@ efi_thunk_set_wakeup_time(efi_bool_t enabled, efi_time_t *tm) spin_lock(&rtc_lock); - phys_tm = virt_to_phys(tm); + phys_tm = virt_to_phys_or_null(tm); status = efi_thunk(set_wakeup_time, enabled, phys_tm); @@ -558,6 +588,10 @@ efi_thunk_set_wakeup_time(efi_bool_t enabled, efi_time_t *tm) return status; } +static unsigned long efi_name_size(efi_char16_t *name) +{ + return ucs2_strsize(name, EFI_VAR_NAME_LEN) + 1; +} static efi_status_t efi_thunk_get_variable(efi_char16_t *name, efi_guid_t *vendor, @@ -567,11 +601,11 @@ efi_thunk_get_variable(efi_char16_t *name, efi_guid_t *vendor, u32 phys_name, phys_vendor, phys_attr; u32 phys_data_size, phys_data; - phys_data_size = virt_to_phys(data_size); - phys_vendor = virt_to_phys(vendor); - phys_name = virt_to_phys(name); - phys_attr = virt_to_phys(attr); - phys_data = virt_to_phys(data); + phys_data_size = virt_to_phys_or_null(data_size); + phys_vendor = virt_to_phys_or_null(vendor); + phys_name = virt_to_phys_or_null_size(name, efi_name_size(name)); + phys_attr = virt_to_phys_or_null(attr); + phys_data = virt_to_phys_or_null_size(data, *data_size); status = efi_thunk(get_variable, phys_name, phys_vendor, phys_attr, phys_data_size, phys_data); @@ -586,9 +620,9 @@ efi_thunk_set_variable(efi_char16_t *name, efi_guid_t *vendor, u32 phys_name, phys_vendor, phys_data; efi_status_t status; - phys_name = virt_to_phys(name); - phys_vendor = virt_to_phys(vendor); - phys_data = virt_to_phys(data); + phys_name = virt_to_phys_or_null_size(name, efi_name_size(name)); + phys_vendor = virt_to_phys_or_null(vendor); + phys_data = virt_to_phys_or_null_size(data, data_size); /* If data_size is > sizeof(u32) we've got problems */ status = efi_thunk(set_variable, phys_name, phys_vendor, @@ -605,9 +639,9 @@ efi_thunk_get_next_variable(unsigned long *name_size, efi_status_t status; u32 phys_name_size, phys_name, phys_vendor; - phys_name_size = virt_to_phys(name_size); - phys_vendor = virt_to_phys(vendor); - phys_name = virt_to_phys(name); + phys_name_size = virt_to_phys_or_null(name_size); + phys_vendor = virt_to_phys_or_null(vendor); + phys_name = virt_to_phys_or_null_size(name, *name_size); status = efi_thunk(get_next_variable, phys_name_size, phys_name, phys_vendor); @@ -621,7 +655,7 @@ efi_thunk_get_next_high_mono_count(u32 *count) efi_status_t status; u32 phys_count; - phys_count = virt_to_phys(count); + phys_count = virt_to_phys_or_null(count); status = efi_thunk(get_next_high_mono_count, phys_count); return status; @@ -633,7 +667,7 @@ efi_thunk_reset_system(int reset_type, efi_status_t status, { u32 phys_data; - phys_data = virt_to_phys(data); + phys_data = virt_to_phys_or_null_size(data, data_size); efi_thunk(reset_system, reset_type, status, data_size, phys_data); } @@ -661,9 +695,9 @@ efi_thunk_query_variable_info(u32 attr, u64 *storage_space, if (efi.runtime_version < EFI_2_00_SYSTEM_TABLE_REVISION) return EFI_UNSUPPORTED; - phys_storage = virt_to_phys(storage_space); - phys_remaining = virt_to_phys(remaining_space); - phys_max = virt_to_phys(max_variable_size); + phys_storage = virt_to_phys_or_null(storage_space); + phys_remaining = virt_to_phys_or_null(remaining_space); + phys_max = virt_to_phys_or_null(max_variable_size); status = efi_thunk(query_variable_info, attr, phys_storage, phys_remaining, phys_max); From d70674eeaa5efdefb99928691161578ae0a80316 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 25 Oct 2016 17:55:04 +0200 Subject: [PATCH 571/792] iio: maxim_thermocouple: detect invalid storage size in read() As found by gcc -Wmaybe-uninitialized, having a storage_bytes value other than 2 or 4 will result in undefined behavior: drivers/iio/temperature/maxim_thermocouple.c: In function 'maxim_thermocouple_read': drivers/iio/temperature/maxim_thermocouple.c:141:5: error: 'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized] This probably cannot happen, but returning -EINVAL here is appropriate and makes gcc happy and the code more robust. Fixes: 231147ee77f3 ("iio: maxim_thermocouple: Align 16 bit big endian value of raw reads") Signed-off-by: Arnd Bergmann Signed-off-by: Jonathan Cameron (cherry picked from commit 32cb7d27e65df9daa7cee8f1fdf7b259f214bee2) Signed-off-by: Greg Kroah-Hartman --- drivers/iio/temperature/maxim_thermocouple.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/iio/temperature/maxim_thermocouple.c b/drivers/iio/temperature/maxim_thermocouple.c index 066161a4bccd..f962f31a5eb2 100644 --- a/drivers/iio/temperature/maxim_thermocouple.c +++ b/drivers/iio/temperature/maxim_thermocouple.c @@ -136,6 +136,8 @@ static int maxim_thermocouple_read(struct maxim_thermocouple_data *data, ret = spi_read(data->spi, (void *)&buf32, storage_bytes); *val = be32_to_cpu(buf32); break; + default: + ret = -EINVAL; } if (ret) From 83d2c9a9c17b1e9f23a3a0c24c03cd18e4b02520 Mon Sep 17 00:00:00 2001 From: Sven Ebenfeld Date: Mon, 7 Nov 2016 18:51:34 +0100 Subject: [PATCH 572/792] crypto: caam - do not register AES-XTS mode on LP units MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When using AES-XTS on a Wandboard, we receive a Mode error: caam_jr 2102000.jr1: 20001311: CCB: desc idx 19: AES: Mode error. According to the Security Reference Manual, the Low Power AES units of the i.MX6 do not support the XTS mode. Therefore we must not register XTS implementations in the Crypto API. Signed-off-by: Sven Ebenfeld Reviewed-by: Horia Geantă Cc: # 4.4+ Fixes: c6415a6016bf "crypto: caam - add support for acipher xts(aes)" Signed-off-by: Herbert Xu --- drivers/crypto/caam/caamalg.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/crypto/caam/caamalg.c b/drivers/crypto/caam/caamalg.c index 156aad167cd6..f5a63ba97023 100644 --- a/drivers/crypto/caam/caamalg.c +++ b/drivers/crypto/caam/caamalg.c @@ -4583,6 +4583,15 @@ static int __init caam_algapi_init(void) if (!aes_inst && (alg_sel == OP_ALG_ALGSEL_AES)) continue; + /* + * Check support for AES modes not available + * on LP devices. + */ + if ((cha_vid & CHA_ID_LS_AES_MASK) == CHA_ID_LS_AES_LP) + if ((alg->class1_alg_type & OP_ALG_AAI_MASK) == + OP_ALG_AAI_XTS) + continue; + t_alg = caam_alg_alloc(alg); if (IS_ERR(t_alg)) { err = PTR_ERR(t_alg); From ca0a75316dc62af92943761b1cc049e15c92eb09 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Wed, 9 Nov 2016 19:51:25 -0800 Subject: [PATCH 573/792] r8152: Fix error path in open function If usb_submit_urb() called from the open function fails, the following crash may be observed. r8152 8-1:1.0 eth0: intr_urb submit failed: -19 ... r8152 8-1:1.0 eth0: v1.08.3 Unable to handle kernel paging request at virtual address 6b6b6b6b6b6b6b7b pgd = ffffffc0e7305000 [6b6b6b6b6b6b6b7b] *pgd=0000000000000000, *pud=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP ... PC is at notifier_chain_register+0x2c/0x58 LR is at blocking_notifier_chain_register+0x54/0x70 ... Call trace: [] notifier_chain_register+0x2c/0x58 [] blocking_notifier_chain_register+0x54/0x70 [] register_pm_notifier+0x24/0x2c [] rtl8152_open+0x3dc/0x3f8 [r8152] [] __dev_open+0xac/0x104 [] __dev_change_flags+0xb0/0x148 [] dev_change_flags+0x34/0x70 [] do_setlink+0x2c8/0x888 [] rtnl_newlink+0x328/0x644 [] rtnetlink_rcv_msg+0x1a8/0x1d4 [] netlink_rcv_skb+0x68/0xd0 [] rtnetlink_rcv+0x2c/0x3c [] netlink_unicast+0x16c/0x234 [] netlink_sendmsg+0x340/0x364 [] sock_sendmsg+0x48/0x60 [] SyS_sendto+0xe0/0x120 [] SyS_send+0x40/0x4c [] el0_svc_naked+0x24/0x28 Clean up error handling to avoid registering the notifier if the open function is going to fail. Signed-off-by: Guenter Roeck Signed-off-by: David S. Miller --- drivers/net/usb/r8152.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index 75c516889645..efb84f092492 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -3266,10 +3266,8 @@ static int rtl8152_open(struct net_device *netdev) goto out; res = usb_autopm_get_interface(tp->intf); - if (res < 0) { - free_all_mem(tp); - goto out; - } + if (res < 0) + goto out_free; mutex_lock(&tp->control); @@ -3285,10 +3283,9 @@ static int rtl8152_open(struct net_device *netdev) netif_device_detach(tp->netdev); netif_warn(tp, ifup, netdev, "intr_urb submit failed: %d\n", res); - free_all_mem(tp); - } else { - napi_enable(&tp->napi); + goto out_unlock; } + napi_enable(&tp->napi); mutex_unlock(&tp->control); @@ -3297,7 +3294,13 @@ static int rtl8152_open(struct net_device *netdev) tp->pm_notifier.notifier_call = rtl_notifier; register_pm_notifier(&tp->pm_notifier); #endif + return 0; +out_unlock: + mutex_unlock(&tp->control); + usb_autopm_put_interface(tp->intf); +out_free: + free_all_mem(tp); out: return res; } From 969447f226b451c453ddc83cac6144eaeac6f2e3 Mon Sep 17 00:00:00 2001 From: Stephen Suryaputra Lin Date: Thu, 10 Nov 2016 11:16:15 -0500 Subject: [PATCH 574/792] ipv4: use new_gw for redirect neigh lookup In v2.6, ip_rt_redirect() calls arp_bind_neighbour() which returns 0 and then the state of the neigh for the new_gw is checked. If the state isn't valid then the redirected route is deleted. This behavior is maintained up to v3.5.7 by check_peer_redirect() because rt->rt_gateway is assigned to peer->redirect_learned.a4 before calling ipv4_neigh_lookup(). After commit 5943634fc559 ("ipv4: Maintain redirect and PMTU info in struct rtable again."), ipv4_neigh_lookup() is performed without the rt_gateway assigned to the new_gw. In the case when rt_gateway (old_gw) isn't zero, the function uses it as the key. The neigh is most likely valid since the old_gw is the one that sends the ICMP redirect message. Then the new_gw is assigned to fib_nh_exception. The problem is: the new_gw ARP may never gets resolved and the traffic is blackholed. So, use the new_gw for neigh lookup. Changes from v1: - use __ipv4_neigh_lookup instead (per Eric Dumazet). Fixes: 5943634fc559 ("ipv4: Maintain redirect and PMTU info in struct rtable again.") Signed-off-by: Stephen Suryaputra Lin Signed-off-by: David S. Miller --- net/ipv4/route.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 62d4d90c1389..2a57566e6e91 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -753,7 +753,9 @@ static void __ip_do_redirect(struct rtable *rt, struct sk_buff *skb, struct flow goto reject_redirect; } - n = ipv4_neigh_lookup(&rt->dst, NULL, &new_gw); + n = __ipv4_neigh_lookup(rt->dst.dev, new_gw); + if (!n) + n = neigh_create(&arp_tbl, &new_gw, rt->dst.dev); if (!IS_ERR(n)) { if (!(n->nud_state & NUD_VALID)) { neigh_event_send(n, NULL); From ac6e780070e30e4c35bd395acfe9191e6268bdd3 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 10 Nov 2016 13:12:35 -0800 Subject: [PATCH 575/792] tcp: take care of truncations done by sk_filter() With syzkaller help, Marco Grassi found a bug in TCP stack, crashing in tcp_collapse() Root cause is that sk_filter() can truncate the incoming skb, but TCP stack was not really expecting this to happen. It probably was expecting a simple DROP or ACCEPT behavior. We first need to make sure no part of TCP header could be removed. Then we need to adjust TCP_SKB_CB(skb)->end_seq Many thanks to syzkaller team and Marco for giving us a reproducer. Signed-off-by: Eric Dumazet Reported-by: Marco Grassi Reported-by: Vladis Dronov Signed-off-by: David S. Miller --- include/net/tcp.h | 1 + net/ipv4/tcp_ipv4.c | 19 ++++++++++++++++++- net/ipv6/tcp_ipv6.c | 6 ++++-- 3 files changed, 23 insertions(+), 3 deletions(-) diff --git a/include/net/tcp.h b/include/net/tcp.h index 304a8e17bc87..123979fe12bf 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -1220,6 +1220,7 @@ static inline void tcp_prequeue_init(struct tcp_sock *tp) bool tcp_prequeue(struct sock *sk, struct sk_buff *skb); bool tcp_add_backlog(struct sock *sk, struct sk_buff *skb); +int tcp_filter(struct sock *sk, struct sk_buff *skb); #undef STATE_TRACE diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index 61b7be303eec..2259114c7242 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -1564,6 +1564,21 @@ bool tcp_add_backlog(struct sock *sk, struct sk_buff *skb) } EXPORT_SYMBOL(tcp_add_backlog); +int tcp_filter(struct sock *sk, struct sk_buff *skb) +{ + struct tcphdr *th = (struct tcphdr *)skb->data; + unsigned int eaten = skb->len; + int err; + + err = sk_filter_trim_cap(sk, skb, th->doff * 4); + if (!err) { + eaten -= skb->len; + TCP_SKB_CB(skb)->end_seq -= eaten; + } + return err; +} +EXPORT_SYMBOL(tcp_filter); + /* * From tcp_input.c */ @@ -1676,8 +1691,10 @@ process: nf_reset(skb); - if (sk_filter(sk, skb)) + if (tcp_filter(sk, skb)) goto discard_and_relse; + th = (const struct tcphdr *)skb->data; + iph = ip_hdr(skb); skb->dev = NULL; diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index 6ca23c2e76f7..b9f1fee9a886 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -1229,7 +1229,7 @@ static int tcp_v6_do_rcv(struct sock *sk, struct sk_buff *skb) if (skb->protocol == htons(ETH_P_IP)) return tcp_v4_do_rcv(sk, skb); - if (sk_filter(sk, skb)) + if (tcp_filter(sk, skb)) goto discard; /* @@ -1457,8 +1457,10 @@ process: if (tcp_v6_inbound_md5_hash(sk, skb)) goto discard_and_relse; - if (sk_filter(sk, skb)) + if (tcp_filter(sk, skb)) goto discard_and_relse; + th = (const struct tcphdr *)skb->data; + hdr = ipv6_hdr(skb); skb->dev = NULL; From 7b5b74efcca00f15c2aec1dc7175bfe34b6ec643 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 10 Nov 2016 19:08:39 -0500 Subject: [PATCH 576/792] Revert "include/uapi/linux/atm_zatm.h: include linux/time.h" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit cf00713a655d ("include/uapi/linux/atm_zatm.h: include linux/time.h"). This attempted to fix userspace breakage that no longer existed when the patch was merged. Almost one year earlier, commit 70ba07b675b5 ("atm: remove 'struct zatm_t_hist'") deleted the struct in question. After this patch was merged, we now have to deal with people being unable to include this header in conjunction with standard C library headers like stdlib.h (which linux-atm does). Example breakage: x86_64-pc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I../.. -I./../q2931 -I./../saal \ -I. -DCPPFLAGS_TEST -I../../src/include -O2 -march=native -pipe -g \ -frecord-gcc-switches -freport-bug -Wimplicit-function-declaration \ -Wnonnull -Wstrict-aliasing -Wparentheses -Warray-bounds \ -Wfree-nonheap-object -Wreturn-local-addr -fno-strict-aliasing -Wall \ -Wshadow -Wpointer-arith -Wwrite-strings -Wstrict-prototypes -c zntune.c In file included from /usr/include/linux/atm_zatm.h:17:0, from zntune.c:17: /usr/include/linux/time.h:9:8: error: redefinition of ‘struct timespec’ struct timespec { ^ In file included from /usr/include/sys/select.h:43:0, from /usr/include/sys/types.h:219, from /usr/include/stdlib.h:314, from zntune.c:9: /usr/include/time.h:120:8: note: originally defined here struct timespec ^ Signed-off-by: Mike Frysinger Acked-by: Mikko Rapeli Signed-off-by: David S. Miller --- include/uapi/linux/atm_zatm.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/uapi/linux/atm_zatm.h b/include/uapi/linux/atm_zatm.h index 5cd4d4d2dd1d..9c9c6ad55f14 100644 --- a/include/uapi/linux/atm_zatm.h +++ b/include/uapi/linux/atm_zatm.h @@ -14,7 +14,6 @@ #include #include -#include #define ZATM_GETPOOL _IOW('a',ATMIOC_SARPRV+1,struct atmif_sioc) /* get pool statistics */ From 3ffb6a39b751b635a0c50b650064c38b8d371ef2 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Fri, 11 Nov 2016 00:11:42 -0500 Subject: [PATCH 577/792] bnxt_en: Fix ring arithmetic in bnxt_setup_tc(). The logic is missing the check on whether the tx and rx rings are sharing completion rings or not. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index a9f9f3738022..c6909660e097 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -6309,6 +6309,7 @@ static int bnxt_setup_tc(struct net_device *dev, u32 handle, __be16 proto, struct tc_to_netdev *ntc) { struct bnxt *bp = netdev_priv(dev); + bool sh = false; u8 tc; if (ntc->type != TC_SETUP_MQPRIO) @@ -6325,12 +6326,11 @@ static int bnxt_setup_tc(struct net_device *dev, u32 handle, __be16 proto, if (netdev_get_num_tc(dev) == tc) return 0; + if (bp->flags & BNXT_FLAG_SHARED_RINGS) + sh = true; + if (tc) { int max_rx_rings, max_tx_rings, rc; - bool sh = false; - - if (bp->flags & BNXT_FLAG_SHARED_RINGS) - sh = true; rc = bnxt_get_max_rings(bp, &max_rx_rings, &max_tx_rings, sh); if (rc || bp->tx_nr_rings_per_tc * tc > max_tx_rings) @@ -6348,7 +6348,8 @@ static int bnxt_setup_tc(struct net_device *dev, u32 handle, __be16 proto, bp->tx_nr_rings = bp->tx_nr_rings_per_tc; netdev_reset_tc(dev); } - bp->cp_nr_rings = max_t(int, bp->tx_nr_rings, bp->rx_nr_rings); + bp->cp_nr_rings = sh ? max_t(int, bp->tx_nr_rings, bp->rx_nr_rings) : + bp->tx_nr_rings + bp->rx_nr_rings; bp->num_stat_ctxs = bp->cp_nr_rings; if (netif_running(bp->dev)) From 73b9bad63ae3c902ce64221d10a0d371d059748d Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Fri, 11 Nov 2016 00:11:43 -0500 Subject: [PATCH 578/792] bnxt_en: Fix VF virtual link state. If the physical link is down and the VF virtual link is set to "enable", the current code does not always work. If the link is down but the cable is attached, the firmware returns LINK_SIGNAL instead of NO_LINK. The current code is treating LINK_SIGNAL as link up. The fix is to treat link as down when the link_status != LINK. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c index ec6cd18842c3..60e2af8678bd 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c @@ -774,8 +774,8 @@ static int bnxt_vf_set_link(struct bnxt *bp, struct bnxt_vf_info *vf) if (vf->flags & BNXT_VF_LINK_UP) { /* if physical link is down, force link up on VF */ - if (phy_qcfg_resp.link == - PORT_PHY_QCFG_RESP_LINK_NO_LINK) { + if (phy_qcfg_resp.link != + PORT_PHY_QCFG_RESP_LINK_LINK) { phy_qcfg_resp.link = PORT_PHY_QCFG_RESP_LINK_LINK; phy_qcfg_resp.link_speed = cpu_to_le16( From 2d644d4c7506646f9c4a2afceb7fd5f030bc0c9f Mon Sep 17 00:00:00 2001 From: Yotam Gigi Date: Fri, 11 Nov 2016 16:34:25 +0100 Subject: [PATCH 579/792] mlxsw: spectrum: Fix refcount bug on span entries When binding port to a newly created span entry, its refcount is initialized to zero even though it has a bound port. That leads to unexpected behaviour when the user tries to delete that port from the span entry. Fix this by initializing the reference count to 1. Also add a warning to put function. Fixes: 763b4b70afcd ("mlxsw: spectrum: Add support in matchall mirror TC offloading") Signed-off-by: Yotam Gigi Reviewed-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c index 1ec0a4ce3c46..dda5761e91bc 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c @@ -231,7 +231,7 @@ mlxsw_sp_span_entry_create(struct mlxsw_sp_port *port) span_entry->used = true; span_entry->id = index; - span_entry->ref_count = 0; + span_entry->ref_count = 1; span_entry->local_port = local_port; return span_entry; } @@ -270,6 +270,7 @@ static struct mlxsw_sp_span_entry span_entry = mlxsw_sp_span_entry_find(port); if (span_entry) { + /* Already exists, just take a reference */ span_entry->ref_count++; return span_entry; } @@ -280,6 +281,7 @@ static struct mlxsw_sp_span_entry static int mlxsw_sp_span_entry_put(struct mlxsw_sp *mlxsw_sp, struct mlxsw_sp_span_entry *span_entry) { + WARN_ON(!span_entry->ref_count); if (--span_entry->ref_count == 0) mlxsw_sp_span_entry_destroy(mlxsw_sp, span_entry); return 0; From 42cdb338f40a98e6558bae35456fe86b6e90e1ef Mon Sep 17 00:00:00 2001 From: Arkadi Sharshevsky Date: Fri, 11 Nov 2016 16:34:26 +0100 Subject: [PATCH 580/792] mlxsw: spectrum_router: Correctly dump neighbour activity The device's neighbour table is periodically dumped in order to update the kernel about active neighbours. A single dump session may span multiple queries, until the response carries less records than requested or when a record (can contain up to four neighbour entries) is not full. Current code stops the session when the number of returned records is zero, which can result in infinite loop in case of high packet rate. Fix this by stopping the session according to the above logic. Fixes: c723c735fa6b ("mlxsw: spectrum_router: Periodically update the kernel's neigh table") Signed-off-by: Arkadi Sharshevsky Signed-off-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- .../ethernet/mellanox/mlxsw/spectrum_router.c | 22 ++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c index 040737e14a3f..cbeeddd70c5a 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c @@ -800,6 +800,26 @@ static void mlxsw_sp_router_neigh_rec_process(struct mlxsw_sp *mlxsw_sp, } } +static bool mlxsw_sp_router_rauhtd_is_full(char *rauhtd_pl) +{ + u8 num_rec, last_rec_index, num_entries; + + num_rec = mlxsw_reg_rauhtd_num_rec_get(rauhtd_pl); + last_rec_index = num_rec - 1; + + if (num_rec < MLXSW_REG_RAUHTD_REC_MAX_NUM) + return false; + if (mlxsw_reg_rauhtd_rec_type_get(rauhtd_pl, last_rec_index) == + MLXSW_REG_RAUHTD_TYPE_IPV6) + return true; + + num_entries = mlxsw_reg_rauhtd_ipv4_rec_num_entries_get(rauhtd_pl, + last_rec_index); + if (++num_entries == MLXSW_REG_RAUHTD_IPV4_ENT_PER_REC) + return true; + return false; +} + static int mlxsw_sp_router_neighs_update_rauhtd(struct mlxsw_sp *mlxsw_sp) { char *rauhtd_pl; @@ -826,7 +846,7 @@ static int mlxsw_sp_router_neighs_update_rauhtd(struct mlxsw_sp *mlxsw_sp) for (i = 0; i < num_rec; i++) mlxsw_sp_router_neigh_rec_process(mlxsw_sp, rauhtd_pl, i); - } while (num_rec); + } while (mlxsw_sp_router_rauhtd_is_full(rauhtd_pl)); rtnl_unlock(); kfree(rauhtd_pl); From 7724325a19fb0a51d2a69bd2915b33f0ff197f5a Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 12 Nov 2016 12:46:26 -0200 Subject: [PATCH 581/792] dvb-usb: move data_mutex to struct dvb_usb_device MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The data_mutex is initialized too late, as it is needed for each device driver's power control, causing an OOPS: dvb-usb: found a 'TerraTec/qanu USB2.0 Highspeed DVB-T Receiver' in warm state. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] __mutex_lock_slowpath+0x6f/0x100 PGD 0 Oops: 0002 [#1] SMP Modules linked in: dvb_usb_cinergyT2(+) dvb_usb CPU: 0 PID: 2029 Comm: modprobe Not tainted 4.9.0-rc4-dvbmod #24 Hardware name: FUJITSU LIFEBOOK A544/FJNBB35 , BIOS Version 1.17 05/09/2014 task: ffff88020e943840 task.stack: ffff8801f36ec000 RIP: 0010:[] [] __mutex_lock_slowpath+0x6f/0x100 RSP: 0018:ffff8801f36efb10 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff88021509bdc8 RCX: 00000000c0000100 RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff88021509bdcc RBP: ffff8801f36efb58 R08: ffff88021f216320 R09: 0000000000100000 R10: ffff88021f216320 R11: 00000023fee6c5a1 R12: ffff88020e943840 R13: ffff88021509bdcc R14: 00000000ffffffff R15: ffff88021509bdd0 FS: 00007f21adb86740(0000) GS:ffff88021f200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000215bce000 CR4: 00000000001406f0 Call Trace: mutex_lock+0x16/0x25 cinergyt2_power_ctrl+0x1f/0x60 [dvb_usb_cinergyT2] dvb_usb_device_init+0x21e/0x5d0 [dvb_usb] cinergyt2_usb_probe+0x21/0x50 [dvb_usb_cinergyT2] usb_probe_interface+0xf3/0x2a0 driver_probe_device+0x208/0x2b0 __driver_attach+0x87/0x90 driver_probe_device+0x2b0/0x2b0 bus_for_each_dev+0x52/0x80 bus_add_driver+0x1a3/0x220 driver_register+0x56/0xd0 usb_register_driver+0x77/0x130 do_one_initcall+0x46/0x180 free_vmap_area_noflush+0x38/0x70 kmem_cache_alloc+0x84/0xc0 do_init_module+0x50/0x1be load_module+0x1d8b/0x2100 find_symbol_in_section+0xa0/0xa0 SyS_finit_module+0x89/0x90 entry_SYSCALL_64_fastpath+0x13/0x94 Code: e8 a7 1d 00 00 8b 03 83 f8 01 0f 84 97 00 00 00 48 8b 43 10 4c 8d 7b 08 48 89 63 10 4c 89 3c 24 41 be ff ff ff ff 48 89 44 24 08 <48> 89 20 4c 89 64 24 10 eb 1a 49 c7 44 24 08 02 00 00 00 c6 43 RIP [] __mutex_lock_slowpath+0x6f/0x100 RSP CR2: 0000000000000000 So, move it to the struct dvb_usb_device and initialize it before calling the driver's callbacks. Reported-by: Jörg Otte Tested-by: Jörg Otte Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Linus Torvalds --- drivers/media/usb/dvb-usb/af9005.c | 33 ++++++------------ drivers/media/usb/dvb-usb/cinergyT2-core.c | 33 ++++++------------ drivers/media/usb/dvb-usb/cxusb.c | 39 +++++++++------------ drivers/media/usb/dvb-usb/cxusb.h | 1 - drivers/media/usb/dvb-usb/dtt200u.c | 40 +++++++++------------- drivers/media/usb/dvb-usb/dvb-usb-init.c | 1 + drivers/media/usb/dvb-usb/dvb-usb.h | 9 +++-- 7 files changed, 61 insertions(+), 95 deletions(-) diff --git a/drivers/media/usb/dvb-usb/af9005.c b/drivers/media/usb/dvb-usb/af9005.c index b257780fb380..7853261906b1 100644 --- a/drivers/media/usb/dvb-usb/af9005.c +++ b/drivers/media/usb/dvb-usb/af9005.c @@ -53,7 +53,6 @@ struct af9005_device_state { u8 sequence; int led_state; unsigned char data[256]; - struct mutex data_mutex; }; static int af9005_generic_read_write(struct dvb_usb_device *d, u16 reg, @@ -72,7 +71,7 @@ static int af9005_generic_read_write(struct dvb_usb_device *d, u16 reg, return -EINVAL; } - mutex_lock(&st->data_mutex); + mutex_lock(&d->data_mutex); st->data[0] = 14; /* rest of buffer length low */ st->data[1] = 0; /* rest of buffer length high */ @@ -140,7 +139,7 @@ static int af9005_generic_read_write(struct dvb_usb_device *d, u16 reg, values[i] = st->data[8 + i]; ret: - mutex_unlock(&st->data_mutex); + mutex_unlock(&d->data_mutex); return ret; } @@ -481,7 +480,7 @@ int af9005_send_command(struct dvb_usb_device *d, u8 command, u8 * wbuf, } packet_len = wlen + 5; - mutex_lock(&st->data_mutex); + mutex_lock(&d->data_mutex); st->data[0] = (u8) (packet_len & 0xff); st->data[1] = (u8) ((packet_len & 0xff00) >> 8); @@ -512,7 +511,7 @@ int af9005_send_command(struct dvb_usb_device *d, u8 command, u8 * wbuf, rbuf[i] = st->data[i + 7]; } - mutex_unlock(&st->data_mutex); + mutex_unlock(&d->data_mutex); return ret; } @@ -523,7 +522,7 @@ int af9005_read_eeprom(struct dvb_usb_device *d, u8 address, u8 * values, u8 seq; int ret, i; - mutex_lock(&st->data_mutex); + mutex_lock(&d->data_mutex); memset(st->data, 0, sizeof(st->data)); @@ -559,7 +558,7 @@ int af9005_read_eeprom(struct dvb_usb_device *d, u8 address, u8 * values, for (i = 0; i < len; i++) values[i] = st->data[6 + i]; } - mutex_unlock(&st->data_mutex); + mutex_unlock(&d->data_mutex); return ret; } @@ -847,7 +846,7 @@ static int af9005_rc_query(struct dvb_usb_device *d, u32 * event, int *state) return 0; } - mutex_lock(&st->data_mutex); + mutex_lock(&d->data_mutex); /* deb_info("rc_query\n"); */ st->data[0] = 3; /* rest of packet length low */ @@ -890,7 +889,7 @@ static int af9005_rc_query(struct dvb_usb_device *d, u32 * event, int *state) } ret: - mutex_unlock(&st->data_mutex); + mutex_unlock(&d->data_mutex); return ret; } @@ -1004,20 +1003,8 @@ static struct dvb_usb_device_properties af9005_properties; static int af9005_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) { - struct dvb_usb_device *d; - struct af9005_device_state *st; - int ret; - - ret = dvb_usb_device_init(intf, &af9005_properties, - THIS_MODULE, &d, adapter_nr); - - if (ret < 0) - return ret; - - st = d->priv; - mutex_init(&st->data_mutex); - - return 0; + return dvb_usb_device_init(intf, &af9005_properties, + THIS_MODULE, NULL, adapter_nr); } enum af9005_usb_table_entry { diff --git a/drivers/media/usb/dvb-usb/cinergyT2-core.c b/drivers/media/usb/dvb-usb/cinergyT2-core.c index 8ac825413d5a..290275bc7fde 100644 --- a/drivers/media/usb/dvb-usb/cinergyT2-core.c +++ b/drivers/media/usb/dvb-usb/cinergyT2-core.c @@ -42,7 +42,6 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); struct cinergyt2_state { u8 rc_counter; unsigned char data[64]; - struct mutex data_mutex; }; /* We are missing a release hook with usb_device data */ @@ -56,12 +55,12 @@ static int cinergyt2_streaming_ctrl(struct dvb_usb_adapter *adap, int enable) struct cinergyt2_state *st = d->priv; int ret; - mutex_lock(&st->data_mutex); + mutex_lock(&d->data_mutex); st->data[0] = CINERGYT2_EP1_CONTROL_STREAM_TRANSFER; st->data[1] = enable ? 1 : 0; ret = dvb_usb_generic_rw(d, st->data, 2, st->data, 64, 0); - mutex_unlock(&st->data_mutex); + mutex_unlock(&d->data_mutex); return ret; } @@ -71,12 +70,12 @@ static int cinergyt2_power_ctrl(struct dvb_usb_device *d, int enable) struct cinergyt2_state *st = d->priv; int ret; - mutex_lock(&st->data_mutex); + mutex_lock(&d->data_mutex); st->data[0] = CINERGYT2_EP1_SLEEP_MODE; st->data[1] = enable ? 0 : 1; ret = dvb_usb_generic_rw(d, st->data, 2, st->data, 3, 0); - mutex_unlock(&st->data_mutex); + mutex_unlock(&d->data_mutex); return ret; } @@ -89,7 +88,7 @@ static int cinergyt2_frontend_attach(struct dvb_usb_adapter *adap) adap->fe_adap[0].fe = cinergyt2_fe_attach(adap->dev); - mutex_lock(&st->data_mutex); + mutex_lock(&d->data_mutex); st->data[0] = CINERGYT2_EP1_GET_FIRMWARE_VERSION; ret = dvb_usb_generic_rw(d, st->data, 1, st->data, 3, 0); @@ -97,7 +96,7 @@ static int cinergyt2_frontend_attach(struct dvb_usb_adapter *adap) deb_rc("cinergyt2_power_ctrl() Failed to retrieve sleep " "state info\n"); } - mutex_unlock(&st->data_mutex); + mutex_unlock(&d->data_mutex); /* Copy this pointer as we are gonna need it in the release phase */ cinergyt2_usb_device = adap->dev; @@ -166,7 +165,7 @@ static int cinergyt2_rc_query(struct dvb_usb_device *d, u32 *event, int *state) *state = REMOTE_NO_KEY_PRESSED; - mutex_lock(&st->data_mutex); + mutex_lock(&d->data_mutex); st->data[0] = CINERGYT2_EP1_GET_RC_EVENTS; ret = dvb_usb_generic_rw(d, st->data, 1, st->data, 5, 0); @@ -202,29 +201,17 @@ static int cinergyt2_rc_query(struct dvb_usb_device *d, u32 *event, int *state) } ret: - mutex_unlock(&st->data_mutex); + mutex_unlock(&d->data_mutex); return ret; } static int cinergyt2_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) { - struct dvb_usb_device *d; - struct cinergyt2_state *st; - int ret; - - ret = dvb_usb_device_init(intf, &cinergyt2_properties, - THIS_MODULE, &d, adapter_nr); - if (ret < 0) - return ret; - - st = d->priv; - mutex_init(&st->data_mutex); - - return 0; + return dvb_usb_device_init(intf, &cinergyt2_properties, + THIS_MODULE, NULL, adapter_nr); } - static struct usb_device_id cinergyt2_usb_table[] = { { USB_DEVICE(USB_VID_TERRATEC, 0x0038) }, { 0 } diff --git a/drivers/media/usb/dvb-usb/cxusb.c b/drivers/media/usb/dvb-usb/cxusb.c index 39772812269d..243403081fa5 100644 --- a/drivers/media/usb/dvb-usb/cxusb.c +++ b/drivers/media/usb/dvb-usb/cxusb.c @@ -68,7 +68,7 @@ static int cxusb_ctrl_msg(struct dvb_usb_device *d, wo = (rbuf == NULL || rlen == 0); /* write-only */ - mutex_lock(&st->data_mutex); + mutex_lock(&d->data_mutex); st->data[0] = cmd; memcpy(&st->data[1], wbuf, wlen); if (wo) @@ -77,7 +77,7 @@ static int cxusb_ctrl_msg(struct dvb_usb_device *d, ret = dvb_usb_generic_rw(d, st->data, 1 + wlen, rbuf, rlen, 0); - mutex_unlock(&st->data_mutex); + mutex_unlock(&d->data_mutex); return ret; } @@ -1461,43 +1461,36 @@ static struct dvb_usb_device_properties cxusb_mygica_t230_properties; static int cxusb_probe(struct usb_interface *intf, const struct usb_device_id *id) { - struct dvb_usb_device *d; - struct cxusb_state *st; - if (0 == dvb_usb_device_init(intf, &cxusb_medion_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_bluebird_lgh064f_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_bluebird_dee1601_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_bluebird_lgz201_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_bluebird_dtt7579_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_bluebird_dualdig4_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_bluebird_nano2_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_bluebird_nano2_needsfirmware_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_aver_a868r_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_bluebird_dualdig4_rev2_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_d680_dmb_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_mygica_d689_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &cxusb_mygica_t230_properties, - THIS_MODULE, &d, adapter_nr) || - 0) { - st = d->priv; - mutex_init(&st->data_mutex); - + THIS_MODULE, NULL, adapter_nr) || + 0) return 0; - } return -EINVAL; } diff --git a/drivers/media/usb/dvb-usb/cxusb.h b/drivers/media/usb/dvb-usb/cxusb.h index 9f3ee0e47d5c..18acda19527a 100644 --- a/drivers/media/usb/dvb-usb/cxusb.h +++ b/drivers/media/usb/dvb-usb/cxusb.h @@ -37,7 +37,6 @@ struct cxusb_state { struct i2c_client *i2c_client_tuner; unsigned char data[MAX_XFER_SIZE]; - struct mutex data_mutex; }; #endif diff --git a/drivers/media/usb/dvb-usb/dtt200u.c b/drivers/media/usb/dvb-usb/dtt200u.c index f88572c7ae7c..fcbff7fb0c4e 100644 --- a/drivers/media/usb/dvb-usb/dtt200u.c +++ b/drivers/media/usb/dvb-usb/dtt200u.c @@ -22,7 +22,6 @@ DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); struct dtt200u_state { unsigned char data[80]; - struct mutex data_mutex; }; static int dtt200u_power_ctrl(struct dvb_usb_device *d, int onoff) @@ -30,23 +29,24 @@ static int dtt200u_power_ctrl(struct dvb_usb_device *d, int onoff) struct dtt200u_state *st = d->priv; int ret = 0; - mutex_lock(&st->data_mutex); + mutex_lock(&d->data_mutex); st->data[0] = SET_INIT; if (onoff) ret = dvb_usb_generic_write(d, st->data, 2); - mutex_unlock(&st->data_mutex); + mutex_unlock(&d->data_mutex); return ret; } static int dtt200u_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) { - struct dtt200u_state *st = adap->dev->priv; + struct dvb_usb_device *d = adap->dev; + struct dtt200u_state *st = d->priv; int ret; - mutex_lock(&st->data_mutex); + mutex_lock(&d->data_mutex); st->data[0] = SET_STREAMING; st->data[1] = onoff; @@ -61,26 +61,27 @@ static int dtt200u_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) ret = dvb_usb_generic_write(adap->dev, st->data, 1); ret: - mutex_unlock(&st->data_mutex); + mutex_unlock(&d->data_mutex); return ret; } static int dtt200u_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, int onoff) { - struct dtt200u_state *st = adap->dev->priv; + struct dvb_usb_device *d = adap->dev; + struct dtt200u_state *st = d->priv; int ret; pid = onoff ? pid : 0; - mutex_lock(&st->data_mutex); + mutex_lock(&d->data_mutex); st->data[0] = SET_PID_FILTER; st->data[1] = index; st->data[2] = pid & 0xff; st->data[3] = (pid >> 8) & 0x1f; ret = dvb_usb_generic_write(adap->dev, st->data, 4); - mutex_unlock(&st->data_mutex); + mutex_unlock(&d->data_mutex); return ret; } @@ -91,7 +92,7 @@ static int dtt200u_rc_query(struct dvb_usb_device *d) u32 scancode; int ret; - mutex_lock(&st->data_mutex); + mutex_lock(&d->data_mutex); st->data[0] = GET_RC_CODE; ret = dvb_usb_generic_rw(d, st->data, 1, st->data, 5, 0); @@ -126,7 +127,7 @@ static int dtt200u_rc_query(struct dvb_usb_device *d) deb_info("st->data: %*ph\n", 5, st->data); ret: - mutex_unlock(&st->data_mutex); + mutex_unlock(&d->data_mutex); return ret; } @@ -145,24 +146,17 @@ static struct dvb_usb_device_properties wt220u_miglia_properties; static int dtt200u_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) { - struct dvb_usb_device *d; - struct dtt200u_state *st; - if (0 == dvb_usb_device_init(intf, &dtt200u_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &wt220u_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &wt220u_fc_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &wt220u_zl0353_properties, - THIS_MODULE, &d, adapter_nr) || + THIS_MODULE, NULL, adapter_nr) || 0 == dvb_usb_device_init(intf, &wt220u_miglia_properties, - THIS_MODULE, &d, adapter_nr)) { - st = d->priv; - mutex_init(&st->data_mutex); - + THIS_MODULE, NULL, adapter_nr)) return 0; - } return -ENODEV; } diff --git a/drivers/media/usb/dvb-usb/dvb-usb-init.c b/drivers/media/usb/dvb-usb/dvb-usb-init.c index 3896ba9a4179..84308569e7dc 100644 --- a/drivers/media/usb/dvb-usb/dvb-usb-init.c +++ b/drivers/media/usb/dvb-usb/dvb-usb-init.c @@ -142,6 +142,7 @@ static int dvb_usb_init(struct dvb_usb_device *d, short *adapter_nums) { int ret = 0; + mutex_init(&d->data_mutex); mutex_init(&d->usb_mutex); mutex_init(&d->i2c_mutex); diff --git a/drivers/media/usb/dvb-usb/dvb-usb.h b/drivers/media/usb/dvb-usb/dvb-usb.h index 639c4678c65b..107255b08b2b 100644 --- a/drivers/media/usb/dvb-usb/dvb-usb.h +++ b/drivers/media/usb/dvb-usb/dvb-usb.h @@ -404,8 +404,12 @@ struct dvb_usb_adapter { * Powered is in/decremented for each call to modify the state. * @udev: pointer to the device's struct usb_device. * - * @usb_mutex: semaphore of USB control messages (reading needs two messages) - * @i2c_mutex: semaphore for i2c-transfers + * @data_mutex: mutex to protect the data structure used to store URB data + * @usb_mutex: mutex of USB control messages (reading needs two messages). + * Please notice that this mutex is used internally at the generic + * URB control functions. So, drivers using dvb_usb_generic_rw() and + * derivated functions should not lock it internally. + * @i2c_mutex: mutex for i2c-transfers * * @i2c_adap: device's i2c_adapter if it uses I2CoverUSB * @@ -433,6 +437,7 @@ struct dvb_usb_device { int powered; /* locking */ + struct mutex data_mutex; struct mutex usb_mutex; /* i2c */ From 1596c387e970cb680d4031fbe4d6eb2c2a4ddb63 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 12 Nov 2016 12:46:27 -0200 Subject: [PATCH 582/792] gp8psk: fix gp8psk_usb_in_op() logic Commit bc29131ecb10 ("[media] gp8psk: don't do DMA on stack") fixed the usage of DMA on stack, but the memcpy was wrong for gp8psk_usb_in_op(). Fix it. From Derek's email: "Fix confirmed using 2 different Skywalker models with HD mpeg4, SD mpeg2." Suggested-by: Johannes Stezenbach Fixes: bc29131ecb10 ("[media] gp8psk: don't do DMA on stack") Tested-by: Derek Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Linus Torvalds --- drivers/media/usb/dvb-usb/gp8psk.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/media/usb/dvb-usb/gp8psk.c b/drivers/media/usb/dvb-usb/gp8psk.c index adfd76491451..2829e3082d15 100644 --- a/drivers/media/usb/dvb-usb/gp8psk.c +++ b/drivers/media/usb/dvb-usb/gp8psk.c @@ -67,7 +67,6 @@ int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 return ret; while (ret >= 0 && ret != blen && try < 3) { - memcpy(st->data, b, blen); ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev,0), req, @@ -81,8 +80,10 @@ int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 if (ret < 0 || ret != blen) { warn("usb in %d operation failed.", req); ret = -EIO; - } else + } else { ret = 0; + memcpy(b, st->data, blen); + } deb_xfer("in: req. %x, val: %x, ind: %x, buffer: ",req,value,index); debug_dump(b,blen,deb_xfer); From 7a0786c19d65bd4502b4a53aec9ef75e18192a00 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 12 Nov 2016 12:46:28 -0200 Subject: [PATCH 583/792] gp8psk: Fix DVB frontend attach The DVB binding schema at the DVB core assumes that the frontend is a separate driver. Faling to do that causes OOPS when the module is removed, as it tries to do a symbol_put_addr on an internal symbol, causing craches like: WARNING: CPU: 1 PID: 28102 at kernel/module.c:1108 module_put+0x57/0x70 Modules linked in: dvb_usb_gp8psk(-) dvb_usb dvb_core nvidia_drm(PO) nvidia_modeset(PO) snd_hda_codec_hdmi snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd soundcore nvidia(PO) [last unloaded: rc_core] CPU: 1 PID: 28102 Comm: rmmod Tainted: P WC O 4.8.4-build.1 #1 Hardware name: MSI MS-7309/MS-7309, BIOS V1.12 02/23/2009 Call Trace: dump_stack+0x44/0x64 __warn+0xfa/0x120 module_put+0x57/0x70 module_put+0x57/0x70 warn_slowpath_null+0x23/0x30 module_put+0x57/0x70 gp8psk_fe_set_frontend+0x460/0x460 [dvb_usb_gp8psk] symbol_put_addr+0x27/0x50 dvb_usb_adapter_frontend_exit+0x3a/0x70 [dvb_usb] From Derek's tests: "Attach bug is fixed, tuning works, module unloads without crashing. Everything seems ok!" Reported-by: Derek Tested-by: Derek Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Linus Torvalds --- drivers/media/dvb-frontends/Kconfig | 5 + drivers/media/dvb-frontends/Makefile | 1 + .../dvb-usb => dvb-frontends}/gp8psk-fe.c | 135 +++++++++++------- drivers/media/dvb-frontends/gp8psk-fe.h | 82 +++++++++++ drivers/media/usb/dvb-usb/Makefile | 2 +- drivers/media/usb/dvb-usb/gp8psk.c | 106 ++++++++++---- drivers/media/usb/dvb-usb/gp8psk.h | 63 -------- 7 files changed, 244 insertions(+), 150 deletions(-) rename drivers/media/{usb/dvb-usb => dvb-frontends}/gp8psk-fe.c (72%) create mode 100644 drivers/media/dvb-frontends/gp8psk-fe.h diff --git a/drivers/media/dvb-frontends/Kconfig b/drivers/media/dvb-frontends/Kconfig index 012225587c25..b71b747ee0ba 100644 --- a/drivers/media/dvb-frontends/Kconfig +++ b/drivers/media/dvb-frontends/Kconfig @@ -513,6 +513,11 @@ config DVB_AS102_FE depends on DVB_CORE default DVB_AS102 +config DVB_GP8PSK_FE + tristate + depends on DVB_CORE + default DVB_USB_GP8PSK + comment "DVB-C (cable) frontends" depends on DVB_CORE diff --git a/drivers/media/dvb-frontends/Makefile b/drivers/media/dvb-frontends/Makefile index e90165ad361b..93921a4eaa27 100644 --- a/drivers/media/dvb-frontends/Makefile +++ b/drivers/media/dvb-frontends/Makefile @@ -121,6 +121,7 @@ obj-$(CONFIG_DVB_RTL2832_SDR) += rtl2832_sdr.o obj-$(CONFIG_DVB_M88RS2000) += m88rs2000.o obj-$(CONFIG_DVB_AF9033) += af9033.o obj-$(CONFIG_DVB_AS102_FE) += as102_fe.o +obj-$(CONFIG_DVB_GP8PSK_FE) += gp8psk-fe.o obj-$(CONFIG_DVB_TC90522) += tc90522.o obj-$(CONFIG_DVB_HORUS3A) += horus3a.o obj-$(CONFIG_DVB_ASCOT2E) += ascot2e.o diff --git a/drivers/media/usb/dvb-usb/gp8psk-fe.c b/drivers/media/dvb-frontends/gp8psk-fe.c similarity index 72% rename from drivers/media/usb/dvb-usb/gp8psk-fe.c rename to drivers/media/dvb-frontends/gp8psk-fe.c index db6eb79cde07..be19afeed7a9 100644 --- a/drivers/media/usb/dvb-usb/gp8psk-fe.c +++ b/drivers/media/dvb-frontends/gp8psk-fe.c @@ -14,11 +14,27 @@ * * see Documentation/dvb/README.dvb-usb for more information */ -#include "gp8psk.h" + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include "gp8psk-fe.h" +#include "dvb_frontend.h" + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off)."); + +#define dprintk(fmt, arg...) do { \ + if (debug) \ + printk(KERN_DEBUG pr_fmt("%s: " fmt), \ + __func__, ##arg); \ +} while (0) struct gp8psk_fe_state { struct dvb_frontend fe; - struct dvb_usb_device *d; + void *priv; + const struct gp8psk_fe_ops *ops; + bool is_rev1; u8 lock; u16 snr; unsigned long next_status_check; @@ -29,22 +45,24 @@ static int gp8psk_tuned_to_DCII(struct dvb_frontend *fe) { struct gp8psk_fe_state *st = fe->demodulator_priv; u8 status; - gp8psk_usb_in_op(st->d, GET_8PSK_CONFIG, 0, 0, &status, 1); + + st->ops->in(st->priv, GET_8PSK_CONFIG, 0, 0, &status, 1); return status & bmDCtuned; } static int gp8psk_set_tuner_mode(struct dvb_frontend *fe, int mode) { - struct gp8psk_fe_state *state = fe->demodulator_priv; - return gp8psk_usb_out_op(state->d, SET_8PSK_CONFIG, mode, 0, NULL, 0); + struct gp8psk_fe_state *st = fe->demodulator_priv; + + return st->ops->out(st->priv, SET_8PSK_CONFIG, mode, 0, NULL, 0); } static int gp8psk_fe_update_status(struct gp8psk_fe_state *st) { u8 buf[6]; if (time_after(jiffies,st->next_status_check)) { - gp8psk_usb_in_op(st->d, GET_SIGNAL_LOCK, 0,0,&st->lock,1); - gp8psk_usb_in_op(st->d, GET_SIGNAL_STRENGTH, 0,0,buf,6); + st->ops->in(st->priv, GET_SIGNAL_LOCK, 0, 0, &st->lock, 1); + st->ops->in(st->priv, GET_SIGNAL_STRENGTH, 0, 0, buf, 6); st->snr = (buf[1]) << 8 | buf[0]; st->next_status_check = jiffies + (st->status_check_interval*HZ)/1000; } @@ -116,13 +134,12 @@ static int gp8psk_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_front static int gp8psk_fe_set_frontend(struct dvb_frontend *fe) { - struct gp8psk_fe_state *state = fe->demodulator_priv; + struct gp8psk_fe_state *st = fe->demodulator_priv; struct dtv_frontend_properties *c = &fe->dtv_property_cache; u8 cmd[10]; u32 freq = c->frequency * 1000; - int gp_product_id = le16_to_cpu(state->d->udev->descriptor.idProduct); - deb_fe("%s()\n", __func__); + dprintk("%s()\n", __func__); cmd[4] = freq & 0xff; cmd[5] = (freq >> 8) & 0xff; @@ -136,21 +153,21 @@ static int gp8psk_fe_set_frontend(struct dvb_frontend *fe) switch (c->delivery_system) { case SYS_DVBS: if (c->modulation != QPSK) { - deb_fe("%s: unsupported modulation selected (%d)\n", + dprintk("%s: unsupported modulation selected (%d)\n", __func__, c->modulation); return -EOPNOTSUPP; } c->fec_inner = FEC_AUTO; break; case SYS_DVBS2: /* kept for backwards compatibility */ - deb_fe("%s: DVB-S2 delivery system selected\n", __func__); + dprintk("%s: DVB-S2 delivery system selected\n", __func__); break; case SYS_TURBO: - deb_fe("%s: Turbo-FEC delivery system selected\n", __func__); + dprintk("%s: Turbo-FEC delivery system selected\n", __func__); break; default: - deb_fe("%s: unsupported delivery system selected (%d)\n", + dprintk("%s: unsupported delivery system selected (%d)\n", __func__, c->delivery_system); return -EOPNOTSUPP; } @@ -161,9 +178,9 @@ static int gp8psk_fe_set_frontend(struct dvb_frontend *fe) cmd[3] = (c->symbol_rate >> 24) & 0xff; switch (c->modulation) { case QPSK: - if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM) + if (st->is_rev1) if (gp8psk_tuned_to_DCII(fe)) - gp8psk_bcm4500_reload(state->d); + st->ops->reload(st->priv); switch (c->fec_inner) { case FEC_1_2: cmd[9] = 0; break; @@ -207,18 +224,18 @@ static int gp8psk_fe_set_frontend(struct dvb_frontend *fe) cmd[9] = 0; break; default: /* Unknown modulation */ - deb_fe("%s: unsupported modulation selected (%d)\n", + dprintk("%s: unsupported modulation selected (%d)\n", __func__, c->modulation); return -EOPNOTSUPP; } - if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM) + if (st->is_rev1) gp8psk_set_tuner_mode(fe, 0); - gp8psk_usb_out_op(state->d, TUNE_8PSK, 0, 0, cmd, 10); + st->ops->out(st->priv, TUNE_8PSK, 0, 0, cmd, 10); - state->lock = 0; - state->next_status_check = jiffies; - state->status_check_interval = 200; + st->lock = 0; + st->next_status_check = jiffies; + st->status_check_interval = 200; return 0; } @@ -228,9 +245,9 @@ static int gp8psk_fe_send_diseqc_msg (struct dvb_frontend* fe, { struct gp8psk_fe_state *st = fe->demodulator_priv; - deb_fe("%s\n",__func__); + dprintk("%s\n", __func__); - if (gp8psk_usb_out_op(st->d,SEND_DISEQC_COMMAND, m->msg[0], 0, + if (st->ops->out(st->priv, SEND_DISEQC_COMMAND, m->msg[0], 0, m->msg, m->msg_len)) { return -EINVAL; } @@ -243,12 +260,12 @@ static int gp8psk_fe_send_diseqc_burst(struct dvb_frontend *fe, struct gp8psk_fe_state *st = fe->demodulator_priv; u8 cmd; - deb_fe("%s\n",__func__); + dprintk("%s\n", __func__); /* These commands are certainly wrong */ cmd = (burst == SEC_MINI_A) ? 0x00 : 0x01; - if (gp8psk_usb_out_op(st->d,SEND_DISEQC_COMMAND, cmd, 0, + if (st->ops->out(st->priv, SEND_DISEQC_COMMAND, cmd, 0, &cmd, 0)) { return -EINVAL; } @@ -258,10 +275,10 @@ static int gp8psk_fe_send_diseqc_burst(struct dvb_frontend *fe, static int gp8psk_fe_set_tone(struct dvb_frontend *fe, enum fe_sec_tone_mode tone) { - struct gp8psk_fe_state* state = fe->demodulator_priv; + struct gp8psk_fe_state *st = fe->demodulator_priv; - if (gp8psk_usb_out_op(state->d,SET_22KHZ_TONE, - (tone == SEC_TONE_ON), 0, NULL, 0)) { + if (st->ops->out(st->priv, SET_22KHZ_TONE, + (tone == SEC_TONE_ON), 0, NULL, 0)) { return -EINVAL; } return 0; @@ -270,9 +287,9 @@ static int gp8psk_fe_set_tone(struct dvb_frontend *fe, static int gp8psk_fe_set_voltage(struct dvb_frontend *fe, enum fe_sec_voltage voltage) { - struct gp8psk_fe_state* state = fe->demodulator_priv; + struct gp8psk_fe_state *st = fe->demodulator_priv; - if (gp8psk_usb_out_op(state->d,SET_LNB_VOLTAGE, + if (st->ops->out(st->priv, SET_LNB_VOLTAGE, voltage == SEC_VOLTAGE_18, 0, NULL, 0)) { return -EINVAL; } @@ -281,52 +298,60 @@ static int gp8psk_fe_set_voltage(struct dvb_frontend *fe, static int gp8psk_fe_enable_high_lnb_voltage(struct dvb_frontend* fe, long onoff) { - struct gp8psk_fe_state* state = fe->demodulator_priv; - return gp8psk_usb_out_op(state->d, USE_EXTRA_VOLT, onoff, 0,NULL,0); + struct gp8psk_fe_state *st = fe->demodulator_priv; + + return st->ops->out(st->priv, USE_EXTRA_VOLT, onoff, 0, NULL, 0); } static int gp8psk_fe_send_legacy_dish_cmd (struct dvb_frontend* fe, unsigned long sw_cmd) { - struct gp8psk_fe_state* state = fe->demodulator_priv; + struct gp8psk_fe_state *st = fe->demodulator_priv; u8 cmd = sw_cmd & 0x7f; - if (gp8psk_usb_out_op(state->d,SET_DN_SWITCH, cmd, 0, - NULL, 0)) { + if (st->ops->out(st->priv, SET_DN_SWITCH, cmd, 0, NULL, 0)) return -EINVAL; - } - if (gp8psk_usb_out_op(state->d,SET_LNB_VOLTAGE, !!(sw_cmd & 0x80), - 0, NULL, 0)) { + + if (st->ops->out(st->priv, SET_LNB_VOLTAGE, !!(sw_cmd & 0x80), + 0, NULL, 0)) return -EINVAL; - } return 0; } static void gp8psk_fe_release(struct dvb_frontend* fe) { - struct gp8psk_fe_state *state = fe->demodulator_priv; - kfree(state); + struct gp8psk_fe_state *st = fe->demodulator_priv; + + kfree(st); } static struct dvb_frontend_ops gp8psk_fe_ops; -struct dvb_frontend * gp8psk_fe_attach(struct dvb_usb_device *d) +struct dvb_frontend *gp8psk_fe_attach(const struct gp8psk_fe_ops *ops, + void *priv, bool is_rev1) { - struct gp8psk_fe_state *s = kzalloc(sizeof(struct gp8psk_fe_state), GFP_KERNEL); - if (s == NULL) - goto error; + struct gp8psk_fe_state *st; - s->d = d; - memcpy(&s->fe.ops, &gp8psk_fe_ops, sizeof(struct dvb_frontend_ops)); - s->fe.demodulator_priv = s; + if (!ops || !ops->in || !ops->out || !ops->reload) { + pr_err("Error! gp8psk-fe ops not defined.\n"); + return NULL; + } - goto success; -error: - return NULL; -success: - return &s->fe; + st = kzalloc(sizeof(struct gp8psk_fe_state), GFP_KERNEL); + if (!st) + return NULL; + + memcpy(&st->fe.ops, &gp8psk_fe_ops, sizeof(struct dvb_frontend_ops)); + st->fe.demodulator_priv = st; + st->ops = ops; + st->priv = priv; + st->is_rev1 = is_rev1; + + pr_info("Frontend %sattached\n", is_rev1 ? "revision 1 " : ""); + + return &st->fe; } - +EXPORT_SYMBOL_GPL(gp8psk_fe_attach); static struct dvb_frontend_ops gp8psk_fe_ops = { .delsys = { SYS_DVBS }, diff --git a/drivers/media/dvb-frontends/gp8psk-fe.h b/drivers/media/dvb-frontends/gp8psk-fe.h new file mode 100644 index 000000000000..6c7944b1ecd6 --- /dev/null +++ b/drivers/media/dvb-frontends/gp8psk-fe.h @@ -0,0 +1,82 @@ +/* + * gp8psk_fe driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef GP8PSK_FE_H +#define GP8PSK_FE_H + +#include + +/* gp8psk commands */ + +#define GET_8PSK_CONFIG 0x80 /* in */ +#define SET_8PSK_CONFIG 0x81 +#define I2C_WRITE 0x83 +#define I2C_READ 0x84 +#define ARM_TRANSFER 0x85 +#define TUNE_8PSK 0x86 +#define GET_SIGNAL_STRENGTH 0x87 /* in */ +#define LOAD_BCM4500 0x88 +#define BOOT_8PSK 0x89 /* in */ +#define START_INTERSIL 0x8A /* in */ +#define SET_LNB_VOLTAGE 0x8B +#define SET_22KHZ_TONE 0x8C +#define SEND_DISEQC_COMMAND 0x8D +#define SET_DVB_MODE 0x8E +#define SET_DN_SWITCH 0x8F +#define GET_SIGNAL_LOCK 0x90 /* in */ +#define GET_FW_VERS 0x92 +#define GET_SERIAL_NUMBER 0x93 /* in */ +#define USE_EXTRA_VOLT 0x94 +#define GET_FPGA_VERS 0x95 +#define CW3K_INIT 0x9d + +/* PSK_configuration bits */ +#define bm8pskStarted 0x01 +#define bm8pskFW_Loaded 0x02 +#define bmIntersilOn 0x04 +#define bmDVBmode 0x08 +#define bm22kHz 0x10 +#define bmSEL18V 0x20 +#define bmDCtuned 0x40 +#define bmArmed 0x80 + +/* Satellite modulation modes */ +#define ADV_MOD_DVB_QPSK 0 /* DVB-S QPSK */ +#define ADV_MOD_TURBO_QPSK 1 /* Turbo QPSK */ +#define ADV_MOD_TURBO_8PSK 2 /* Turbo 8PSK (also used for Trellis 8PSK) */ +#define ADV_MOD_TURBO_16QAM 3 /* Turbo 16QAM (also used for Trellis 8PSK) */ + +#define ADV_MOD_DCII_C_QPSK 4 /* Digicipher II Combo */ +#define ADV_MOD_DCII_I_QPSK 5 /* Digicipher II I-stream */ +#define ADV_MOD_DCII_Q_QPSK 6 /* Digicipher II Q-stream */ +#define ADV_MOD_DCII_C_OQPSK 7 /* Digicipher II offset QPSK */ +#define ADV_MOD_DSS_QPSK 8 /* DSS (DIRECTV) QPSK */ +#define ADV_MOD_DVB_BPSK 9 /* DVB-S BPSK */ + +/* firmware revision id's */ +#define GP8PSK_FW_REV1 0x020604 +#define GP8PSK_FW_REV2 0x020704 +#define GP8PSK_FW_VERS(_fw_vers) \ + ((_fw_vers)[2]<<0x10 | (_fw_vers)[1]<<0x08 | (_fw_vers)[0]) + +struct gp8psk_fe_ops { + int (*in)(void *priv, u8 req, u16 value, u16 index, u8 *b, int blen); + int (*out)(void *priv, u8 req, u16 value, u16 index, u8 *b, int blen); + int (*reload)(void *priv); +}; + +struct dvb_frontend *gp8psk_fe_attach(const struct gp8psk_fe_ops *ops, + void *priv, bool is_rev1); + +#endif diff --git a/drivers/media/usb/dvb-usb/Makefile b/drivers/media/usb/dvb-usb/Makefile index 2a7b5a963acf..3b3f32b426d1 100644 --- a/drivers/media/usb/dvb-usb/Makefile +++ b/drivers/media/usb/dvb-usb/Makefile @@ -8,7 +8,7 @@ obj-$(CONFIG_DVB_USB_VP7045) += dvb-usb-vp7045.o dvb-usb-vp702x-objs := vp702x.o vp702x-fe.o obj-$(CONFIG_DVB_USB_VP702X) += dvb-usb-vp702x.o -dvb-usb-gp8psk-objs := gp8psk.o gp8psk-fe.o +dvb-usb-gp8psk-objs := gp8psk.o obj-$(CONFIG_DVB_USB_GP8PSK) += dvb-usb-gp8psk.o dvb-usb-dtt200u-objs := dtt200u.o dtt200u-fe.o diff --git a/drivers/media/usb/dvb-usb/gp8psk.c b/drivers/media/usb/dvb-usb/gp8psk.c index 2829e3082d15..993bb7a72985 100644 --- a/drivers/media/usb/dvb-usb/gp8psk.c +++ b/drivers/media/usb/dvb-usb/gp8psk.c @@ -15,6 +15,7 @@ * see Documentation/dvb/README.dvb-usb for more information */ #include "gp8psk.h" +#include "gp8psk-fe.h" /* debug */ static char bcm4500_firmware[] = "dvb-usb-gp8psk-02.fw"; @@ -28,34 +29,8 @@ struct gp8psk_state { unsigned char data[80]; }; -static int gp8psk_get_fw_version(struct dvb_usb_device *d, u8 *fw_vers) -{ - return (gp8psk_usb_in_op(d, GET_FW_VERS, 0, 0, fw_vers, 6)); -} - -static int gp8psk_get_fpga_version(struct dvb_usb_device *d, u8 *fpga_vers) -{ - return (gp8psk_usb_in_op(d, GET_FPGA_VERS, 0, 0, fpga_vers, 1)); -} - -static void gp8psk_info(struct dvb_usb_device *d) -{ - u8 fpga_vers, fw_vers[6]; - - if (!gp8psk_get_fw_version(d, fw_vers)) - info("FW Version = %i.%02i.%i (0x%x) Build %4i/%02i/%02i", - fw_vers[2], fw_vers[1], fw_vers[0], GP8PSK_FW_VERS(fw_vers), - 2000 + fw_vers[5], fw_vers[4], fw_vers[3]); - else - info("failed to get FW version"); - - if (!gp8psk_get_fpga_version(d, &fpga_vers)) - info("FPGA Version = %i", fpga_vers); - else - info("failed to get FPGA version"); -} - -int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen) +static int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, + u16 index, u8 *b, int blen) { struct gp8psk_state *st = d->priv; int ret = 0,try = 0; @@ -93,7 +68,7 @@ int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 return ret; } -int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value, +static int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen) { struct gp8psk_state *st = d->priv; @@ -124,6 +99,34 @@ int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value, return ret; } + +static int gp8psk_get_fw_version(struct dvb_usb_device *d, u8 *fw_vers) +{ + return gp8psk_usb_in_op(d, GET_FW_VERS, 0, 0, fw_vers, 6); +} + +static int gp8psk_get_fpga_version(struct dvb_usb_device *d, u8 *fpga_vers) +{ + return gp8psk_usb_in_op(d, GET_FPGA_VERS, 0, 0, fpga_vers, 1); +} + +static void gp8psk_info(struct dvb_usb_device *d) +{ + u8 fpga_vers, fw_vers[6]; + + if (!gp8psk_get_fw_version(d, fw_vers)) + info("FW Version = %i.%02i.%i (0x%x) Build %4i/%02i/%02i", + fw_vers[2], fw_vers[1], fw_vers[0], GP8PSK_FW_VERS(fw_vers), + 2000 + fw_vers[5], fw_vers[4], fw_vers[3]); + else + info("failed to get FW version"); + + if (!gp8psk_get_fpga_version(d, &fpga_vers)) + info("FPGA Version = %i", fpga_vers); + else + info("failed to get FPGA version"); +} + static int gp8psk_load_bcm4500fw(struct dvb_usb_device *d) { int ret; @@ -226,10 +229,13 @@ static int gp8psk_power_ctrl(struct dvb_usb_device *d, int onoff) return 0; } -int gp8psk_bcm4500_reload(struct dvb_usb_device *d) +static int gp8psk_bcm4500_reload(struct dvb_usb_device *d) { u8 buf; int gp_product_id = le16_to_cpu(d->udev->descriptor.idProduct); + + deb_xfer("reloading firmware\n"); + /* Turn off 8psk power */ if (gp8psk_usb_in_op(d, BOOT_8PSK, 0, 0, &buf, 1)) return -EINVAL; @@ -248,9 +254,47 @@ static int gp8psk_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) return gp8psk_usb_out_op(adap->dev, ARM_TRANSFER, onoff, 0 , NULL, 0); } +/* Callbacks for gp8psk-fe.c */ + +static int gp8psk_fe_in(void *priv, u8 req, u16 value, + u16 index, u8 *b, int blen) +{ + struct dvb_usb_device *d = priv; + + return gp8psk_usb_in_op(d, req, value, index, b, blen); +} + +static int gp8psk_fe_out(void *priv, u8 req, u16 value, + u16 index, u8 *b, int blen) +{ + struct dvb_usb_device *d = priv; + + return gp8psk_usb_out_op(d, req, value, index, b, blen); +} + +static int gp8psk_fe_reload(void *priv) +{ + struct dvb_usb_device *d = priv; + + return gp8psk_bcm4500_reload(d); +} + +const struct gp8psk_fe_ops gp8psk_fe_ops = { + .in = gp8psk_fe_in, + .out = gp8psk_fe_out, + .reload = gp8psk_fe_reload, +}; + static int gp8psk_frontend_attach(struct dvb_usb_adapter *adap) { - adap->fe_adap[0].fe = gp8psk_fe_attach(adap->dev); + struct dvb_usb_device *d = adap->dev; + int id = le16_to_cpu(d->udev->descriptor.idProduct); + int is_rev1; + + is_rev1 = (id == USB_PID_GENPIX_8PSK_REV_1_WARM) ? true : false; + + adap->fe_adap[0].fe = dvb_attach(gp8psk_fe_attach, + &gp8psk_fe_ops, d, is_rev1); return 0; } diff --git a/drivers/media/usb/dvb-usb/gp8psk.h b/drivers/media/usb/dvb-usb/gp8psk.h index ed32b9da4843..d8975b866dee 100644 --- a/drivers/media/usb/dvb-usb/gp8psk.h +++ b/drivers/media/usb/dvb-usb/gp8psk.h @@ -24,58 +24,6 @@ extern int dvb_usb_gp8psk_debug; #define deb_info(args...) dprintk(dvb_usb_gp8psk_debug,0x01,args) #define deb_xfer(args...) dprintk(dvb_usb_gp8psk_debug,0x02,args) #define deb_rc(args...) dprintk(dvb_usb_gp8psk_debug,0x04,args) -#define deb_fe(args...) dprintk(dvb_usb_gp8psk_debug,0x08,args) - -/* Twinhan Vendor requests */ -#define TH_COMMAND_IN 0xC0 -#define TH_COMMAND_OUT 0xC1 - -/* gp8psk commands */ - -#define GET_8PSK_CONFIG 0x80 /* in */ -#define SET_8PSK_CONFIG 0x81 -#define I2C_WRITE 0x83 -#define I2C_READ 0x84 -#define ARM_TRANSFER 0x85 -#define TUNE_8PSK 0x86 -#define GET_SIGNAL_STRENGTH 0x87 /* in */ -#define LOAD_BCM4500 0x88 -#define BOOT_8PSK 0x89 /* in */ -#define START_INTERSIL 0x8A /* in */ -#define SET_LNB_VOLTAGE 0x8B -#define SET_22KHZ_TONE 0x8C -#define SEND_DISEQC_COMMAND 0x8D -#define SET_DVB_MODE 0x8E -#define SET_DN_SWITCH 0x8F -#define GET_SIGNAL_LOCK 0x90 /* in */ -#define GET_FW_VERS 0x92 -#define GET_SERIAL_NUMBER 0x93 /* in */ -#define USE_EXTRA_VOLT 0x94 -#define GET_FPGA_VERS 0x95 -#define CW3K_INIT 0x9d - -/* PSK_configuration bits */ -#define bm8pskStarted 0x01 -#define bm8pskFW_Loaded 0x02 -#define bmIntersilOn 0x04 -#define bmDVBmode 0x08 -#define bm22kHz 0x10 -#define bmSEL18V 0x20 -#define bmDCtuned 0x40 -#define bmArmed 0x80 - -/* Satellite modulation modes */ -#define ADV_MOD_DVB_QPSK 0 /* DVB-S QPSK */ -#define ADV_MOD_TURBO_QPSK 1 /* Turbo QPSK */ -#define ADV_MOD_TURBO_8PSK 2 /* Turbo 8PSK (also used for Trellis 8PSK) */ -#define ADV_MOD_TURBO_16QAM 3 /* Turbo 16QAM (also used for Trellis 8PSK) */ - -#define ADV_MOD_DCII_C_QPSK 4 /* Digicipher II Combo */ -#define ADV_MOD_DCII_I_QPSK 5 /* Digicipher II I-stream */ -#define ADV_MOD_DCII_Q_QPSK 6 /* Digicipher II Q-stream */ -#define ADV_MOD_DCII_C_OQPSK 7 /* Digicipher II offset QPSK */ -#define ADV_MOD_DSS_QPSK 8 /* DSS (DIRECTV) QPSK */ -#define ADV_MOD_DVB_BPSK 9 /* DVB-S BPSK */ #define GET_USB_SPEED 0x07 @@ -86,15 +34,4 @@ extern int dvb_usb_gp8psk_debug; #define PRODUCT_STRING_READ 0x0D #define FW_BCD_VERSION_READ 0x14 -/* firmware revision id's */ -#define GP8PSK_FW_REV1 0x020604 -#define GP8PSK_FW_REV2 0x020704 -#define GP8PSK_FW_VERS(_fw_vers) ((_fw_vers)[2]<<0x10 | (_fw_vers)[1]<<0x08 | (_fw_vers)[0]) - -extern struct dvb_frontend * gp8psk_fe_attach(struct dvb_usb_device *d); -extern int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen); -extern int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value, - u16 index, u8 *b, int blen); -extern int gp8psk_bcm4500_reload(struct dvb_usb_device *d); - #endif From a25f0944ba9b1d8a6813fd6f1a86f1bd59ac25a6 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 13 Nov 2016 10:32:32 -0800 Subject: [PATCH 584/792] Linux 4.9-rc5 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 06e2b73978e8..247430abfc73 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 4 PATCHLEVEL = 9 SUBLEVEL = 0 -EXTRAVERSION = -rc4 +EXTRAVERSION = -rc5 NAME = Psychotic Stoned Sheep # *DOCUMENTATION* From 46d054f8f540612f09987a53154aa39ae15f2e4c Mon Sep 17 00:00:00 2001 From: Bert Kenward Date: Fri, 11 Nov 2016 15:56:51 +0000 Subject: [PATCH 585/792] sfc: clear napi_hash state when copying channels efx_copy_channel() doesn't correctly clear the napi_hash related state. This means that when napi_hash_add is called for that channel nothing is done, and we are left with a copy of the napi_hash_node from the old channel. When we later call napi_hash_del() on this channel we have a stale napi_hash_node. Corruption is only seen when there are multiple entries in one of the napi_hash lists. This is made more likely by having a very large number of channels. Testing was carried out with 512 channels - 32 channels on each of 16 ports. This failure typically appears as protection faults within napi_by_id() or napi_hash_add(). efx_copy_channel() is only used when tx or rx ring sizes are changed (ethtool -G). Fixes: 36763266bbe8 ("sfc: Add support for busy polling") Signed-off-by: Bert Kenward Signed-off-by: David S. Miller --- drivers/net/ethernet/sfc/efx.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/sfc/efx.c b/drivers/net/ethernet/sfc/efx.c index 3cf3557106c2..6b89e4a7b164 100644 --- a/drivers/net/ethernet/sfc/efx.c +++ b/drivers/net/ethernet/sfc/efx.c @@ -485,6 +485,9 @@ efx_copy_channel(const struct efx_channel *old_channel) *channel = *old_channel; channel->napi_dev = NULL; + INIT_HLIST_NODE(&channel->napi_str.napi_hash_node); + channel->napi_str.napi_id = 0; + channel->napi_str.state = 0; memset(&channel->eventq, 0, sizeof(channel->eventq)); for (j = 0; j < EFX_TXQ_TYPES; j++) { From b7f193da17fb18b752bef77ce52eb49723299bd8 Mon Sep 17 00:00:00 2001 From: Thomas Falcon Date: Fri, 11 Nov 2016 11:00:45 -0600 Subject: [PATCH 586/792] ibmvnic: Unmap ibmvnic_statistics structure This structure was mapped but never subsequently unmapped. Signed-off-by: Thomas Falcon Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmvnic.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index f6c9b6d38ac7..921c40fad1c3 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -3844,6 +3844,9 @@ static int ibmvnic_remove(struct vio_dev *dev) if (adapter->debugfs_dir && !IS_ERR(adapter->debugfs_dir)) debugfs_remove_recursive(adapter->debugfs_dir); + dma_unmap_single(&dev->dev, adapter->stats_token, + sizeof(struct ibmvnic_statistics), DMA_FROM_DEVICE); + if (adapter->ras_comps) dma_free_coherent(&dev->dev, adapter->ras_comp_num * From e1fac0adf0f9b2c1eb49e658e6ed070a744bbaef Mon Sep 17 00:00:00 2001 From: Thomas Falcon Date: Fri, 11 Nov 2016 11:00:46 -0600 Subject: [PATCH 587/792] ibmvnic: Fix size of debugfs name buffer This mistake was causing debugfs directory creation failures when multiple ibmvnic devices were probed. Signed-off-by: Thomas Falcon Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ibmvnic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index 921c40fad1c3..4f3281a03e7e 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -3705,7 +3705,7 @@ static int ibmvnic_probe(struct vio_dev *dev, const struct vio_device_id *id) struct net_device *netdev; unsigned char *mac_addr_p; struct dentry *ent; - char buf[16]; /* debugfs name buf */ + char buf[17]; /* debugfs name buf */ int rc; dev_dbg(&dev->dev, "entering ibmvnic_probe for UA 0x%x\n", From 7774d46b2037b98d3f7e414bffb1d53082dc139b Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Sat, 12 Nov 2016 17:44:06 +0000 Subject: [PATCH 588/792] net: ethernet: ixp4xx_eth: fix spelling mistake in debug message Trivial fix to spelling mistake "successed" to "succeeded" in debug message. Also unwrap multi-line literal string. Signed-off-by: Colin Ian King Signed-off-by: David S. Miller --- drivers/net/ethernet/xscale/ixp4xx_eth.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/ethernet/xscale/ixp4xx_eth.c b/drivers/net/ethernet/xscale/ixp4xx_eth.c index 7f127dc1b7ba..fa32391720fe 100644 --- a/drivers/net/ethernet/xscale/ixp4xx_eth.c +++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c @@ -708,8 +708,7 @@ static int eth_poll(struct napi_struct *napi, int budget) if (!qmgr_stat_below_low_watermark(rxq) && napi_reschedule(napi)) { /* not empty again */ #if DEBUG_RX - printk(KERN_DEBUG "%s: eth_poll" - " napi_reschedule successed\n", + printk(KERN_DEBUG "%s: eth_poll napi_reschedule succeeded\n", dev->name); #endif qmgr_disable_irq(rxq); From cedecbc5e0f39d2987b8e1004908e90459a82e78 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 8 Aug 2016 09:48:00 +0000 Subject: [PATCH 589/792] ntb_pingpong: Fix db_init parameter description Fix 'db_init' parameter description. Signed-off-by: Wei Yongjun Acked-by: Allen Hubbe Signed-off-by: Jon Mason --- drivers/ntb/test/ntb_pingpong.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ntb/test/ntb_pingpong.c b/drivers/ntb/test/ntb_pingpong.c index 7d311799fca1..435861189d97 100644 --- a/drivers/ntb/test/ntb_pingpong.c +++ b/drivers/ntb/test/ntb_pingpong.c @@ -88,7 +88,7 @@ MODULE_PARM_DESC(delay_ms, "Milliseconds to delay the response to peer"); static unsigned long db_init = 0x7; module_param(db_init, ulong, 0644); -MODULE_PARM_DESC(delay_ms, "Initial doorbell bits to ring on the peer"); +MODULE_PARM_DESC(db_init, "Initial doorbell bits to ring on the peer"); struct pp_ctx { struct ntb_dev *ntb; From 49b89de41f8d97eb13a60c1865ed61fbebed0d15 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 8 Aug 2016 09:48:42 +0000 Subject: [PATCH 590/792] NTB: ntb_hw_intel: Fix typo in module parameter descriptions Fix typo in module parameter descriptions. Signed-off-by: Wei Yongjun Acked-by: Allen Hubbe Signed-off-by: Jon Mason --- drivers/ntb/hw/intel/ntb_hw_intel.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/ntb/hw/intel/ntb_hw_intel.c b/drivers/ntb/hw/intel/ntb_hw_intel.c index 0d5c29ae51de..1ee61d92c54b 100644 --- a/drivers/ntb/hw/intel/ntb_hw_intel.c +++ b/drivers/ntb/hw/intel/ntb_hw_intel.c @@ -112,17 +112,17 @@ MODULE_PARM_DESC(xeon_b2b_usd_bar2_addr64, module_param_named(xeon_b2b_usd_bar4_addr64, xeon_b2b_usd_addr.bar4_addr64, ullong, 0644); -MODULE_PARM_DESC(xeon_b2b_usd_bar2_addr64, +MODULE_PARM_DESC(xeon_b2b_usd_bar4_addr64, "XEON B2B USD BAR 4 64-bit address"); module_param_named(xeon_b2b_usd_bar4_addr32, xeon_b2b_usd_addr.bar4_addr32, ullong, 0644); -MODULE_PARM_DESC(xeon_b2b_usd_bar2_addr64, +MODULE_PARM_DESC(xeon_b2b_usd_bar4_addr32, "XEON B2B USD split-BAR 4 32-bit address"); module_param_named(xeon_b2b_usd_bar5_addr32, xeon_b2b_usd_addr.bar5_addr32, ullong, 0644); -MODULE_PARM_DESC(xeon_b2b_usd_bar2_addr64, +MODULE_PARM_DESC(xeon_b2b_usd_bar5_addr32, "XEON B2B USD split-BAR 5 32-bit address"); module_param_named(xeon_b2b_dsd_bar2_addr64, @@ -132,17 +132,17 @@ MODULE_PARM_DESC(xeon_b2b_dsd_bar2_addr64, module_param_named(xeon_b2b_dsd_bar4_addr64, xeon_b2b_dsd_addr.bar4_addr64, ullong, 0644); -MODULE_PARM_DESC(xeon_b2b_dsd_bar2_addr64, +MODULE_PARM_DESC(xeon_b2b_dsd_bar4_addr64, "XEON B2B DSD BAR 4 64-bit address"); module_param_named(xeon_b2b_dsd_bar4_addr32, xeon_b2b_dsd_addr.bar4_addr32, ullong, 0644); -MODULE_PARM_DESC(xeon_b2b_dsd_bar2_addr64, +MODULE_PARM_DESC(xeon_b2b_dsd_bar4_addr32, "XEON B2B DSD split-BAR 4 32-bit address"); module_param_named(xeon_b2b_dsd_bar5_addr32, xeon_b2b_dsd_addr.bar5_addr32, ullong, 0644); -MODULE_PARM_DESC(xeon_b2b_dsd_bar2_addr64, +MODULE_PARM_DESC(xeon_b2b_dsd_bar5_addr32, "XEON B2B DSD split-BAR 5 32-bit address"); #ifndef ioread64 From c0a88032ef8e6814d4dd84551e5f333c1de639b3 Mon Sep 17 00:00:00 2001 From: Nicholas Mc Guire Date: Mon, 22 Aug 2016 18:51:35 +0200 Subject: [PATCH 591/792] ntb_transport: make DMA_OUT_RESOURCE_TO HZ independent schedule_timeout_* takes a timeout in jiffies but the code currently is passing in a constant which makes this timeout HZ dependent, so pass it through msecs_to_jiffies() to fix this up. Signed-off-by: Nicholas Mc Guire Signed-off-by: Jon Mason --- drivers/ntb/ntb_transport.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ntb/ntb_transport.c b/drivers/ntb/ntb_transport.c index 8601c10acf74..4eb8adb34508 100644 --- a/drivers/ntb/ntb_transport.c +++ b/drivers/ntb/ntb_transport.c @@ -257,7 +257,7 @@ enum { #define NTB_QP_DEF_NUM_ENTRIES 100 #define NTB_LINK_DOWN_TIMEOUT 10 #define DMA_RETRIES 20 -#define DMA_OUT_RESOURCE_TO 50 +#define DMA_OUT_RESOURCE_TO msecs_to_jiffies(50) static void ntb_transport_rxc_db(unsigned long data); static const struct ntb_ctx_ops ntb_transport_ops; From cdc08982a5f334cecc15d802464588115512cc36 Mon Sep 17 00:00:00 2001 From: Nicholas Mc Guire Date: Mon, 22 Aug 2016 18:51:36 +0200 Subject: [PATCH 592/792] ntb: make DMA_OUT_RESOURCE_TO HZ independent schedule_timeout_* takes a timeout in jiffies but the code currently is passing in a constant which makes this timeout HZ dependent, so pass it through msecs_to_jiffies() to fix this up. Signed-off-by: Nicholas Mc Guire Acked-by: Dave Jiang Signed-off-by: Jon Mason --- drivers/ntb/test/ntb_perf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ntb/test/ntb_perf.c b/drivers/ntb/test/ntb_perf.c index 6a50f20bf1cd..e065b695200d 100644 --- a/drivers/ntb/test/ntb_perf.c +++ b/drivers/ntb/test/ntb_perf.c @@ -72,7 +72,7 @@ #define MAX_THREADS 32 #define MAX_TEST_SIZE SZ_1M #define MAX_SRCS 32 -#define DMA_OUT_RESOURCE_TO 50 +#define DMA_OUT_RESOURCE_TO msecs_to_jiffies(50) #define DMA_RETRIES 20 #define SZ_4G (1ULL << 32) #define MAX_SEG_ORDER 20 /* no larger than 1M for kmalloc buffer */ From 25ea9f2bf5f76082da919f2a91ea8d920932c1da Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Thu, 27 Oct 2016 11:06:44 -0700 Subject: [PATCH 593/792] ntb: ntb_hw_intel: init peer_addr in struct intel_ntb_dev The peer_addr member of intel_ntb_dev is not set, therefore when acquiring ntb_peer_db and ntb_peer_spad we only get the offset rather than the actual physical address. Adding fix to correct that. Signed-off-by: Dave Jiang Acked-by: Allen Hubbe Signed-off-by: Jon Mason --- drivers/ntb/hw/intel/ntb_hw_intel.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/ntb/hw/intel/ntb_hw_intel.c b/drivers/ntb/hw/intel/ntb_hw_intel.c index 1ee61d92c54b..7310a261c858 100644 --- a/drivers/ntb/hw/intel/ntb_hw_intel.c +++ b/drivers/ntb/hw/intel/ntb_hw_intel.c @@ -1755,6 +1755,8 @@ static int xeon_setup_b2b_mw(struct intel_ntb_dev *ndev, XEON_B2B_MIN_SIZE); if (!ndev->peer_mmio) return -EIO; + + ndev->peer_addr = pci_resource_start(pdev, b2b_bar); } return 0; @@ -2019,6 +2021,7 @@ static int intel_ntb_init_pci(struct intel_ntb_dev *ndev, struct pci_dev *pdev) goto err_mmio; } ndev->peer_mmio = ndev->self_mmio; + ndev->peer_addr = pci_resource_start(pdev, 0); return 0; From 819baf885953b588b63bef28e5598daf9ed4ddf9 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 14 Oct 2016 10:34:18 +0300 Subject: [PATCH 594/792] ntb_perf: potential info leak in debugfs This is a static checker warning, not something I'm desperately concerned about. But snprintf() returns the number of bytes that would have been copied if there were space. We really care about the number of bytes that actually were copied so we should use scnprintf() instead. It probably won't overrun, and in that case we may as well just use sprintf() but these sorts of things make static checkers and code reviewers happier. Signed-off-by: Dan Carpenter Acked-by: Dave Jiang Signed-off-by: Jon Mason --- drivers/ntb/test/ntb_perf.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/ntb/test/ntb_perf.c b/drivers/ntb/test/ntb_perf.c index e065b695200d..e75d4fdc0866 100644 --- a/drivers/ntb/test/ntb_perf.c +++ b/drivers/ntb/test/ntb_perf.c @@ -589,7 +589,7 @@ static ssize_t debugfs_run_read(struct file *filp, char __user *ubuf, return -ENOMEM; if (mutex_is_locked(&perf->run_mutex)) { - out_off = snprintf(buf, 64, "running\n"); + out_off = scnprintf(buf, 64, "running\n"); goto read_from_buf; } @@ -600,14 +600,14 @@ static ssize_t debugfs_run_read(struct file *filp, char __user *ubuf, break; if (pctx->status) { - out_off += snprintf(buf + out_off, 1024 - out_off, + out_off += scnprintf(buf + out_off, 1024 - out_off, "%d: error %d\n", i, pctx->status); continue; } rate = div64_u64(pctx->copied, pctx->diff_us); - out_off += snprintf(buf + out_off, 1024 - out_off, + out_off += scnprintf(buf + out_off, 1024 - out_off, "%d: copied %llu bytes in %llu usecs, %llu MBytes/s\n", i, pctx->copied, pctx->diff_us, rate); } From fa14a0acea1ffe67913ba384a2897130a36dfe03 Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Tue, 1 Nov 2016 18:36:46 +0200 Subject: [PATCH 595/792] nvmet-rdma: Fix possible NULL deref when handling rdma cm events When we initiate queue teardown sequence we call rdma_destroy_qp which clears cm_id->qp, afterwards we call rdma_destroy_id, but we might see a rdma_cm event in between with a cleared cm_id->qp so watch out for that and silently ignore the event because this means that the queue teardown sequence is in progress. Signed-off-by: Bart Van Assche Signed-off-by: Sagi Grimberg --- drivers/nvme/target/rdma.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/nvme/target/rdma.c b/drivers/nvme/target/rdma.c index f8d23999e0f2..cf60759cc169 100644 --- a/drivers/nvme/target/rdma.c +++ b/drivers/nvme/target/rdma.c @@ -1352,7 +1352,13 @@ static int nvmet_rdma_cm_handler(struct rdma_cm_id *cm_id, case RDMA_CM_EVENT_ADDR_CHANGE: case RDMA_CM_EVENT_DISCONNECTED: case RDMA_CM_EVENT_TIMEWAIT_EXIT: - nvmet_rdma_queue_disconnect(queue); + /* + * We might end up here when we already freed the qp + * which means queue release sequence is in progress, + * so don't get in the way... + */ + if (queue) + nvmet_rdma_queue_disconnect(queue); break; case RDMA_CM_EVENT_DEVICE_REMOVAL: ret = nvmet_rdma_device_removal(cm_id, queue); From 553cd9ef82edd811948782a8f73ae73c4bfeedd3 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 2 Nov 2016 08:49:18 -0600 Subject: [PATCH 596/792] nvme-rdma: reject non-connect commands before the queue is live If we reconncect we might have command queue up that get resent as soon as the queue is restarted. But until the connect command succeeded we can't send other command. Add a new flag that marks a queue as live when connect finishes, and delay any non-connect command until the queue is live based on it. Signed-off-by: Christoph Hellwig Reported-by: Steve Wise Tested-by: Steve Wise [sagig: fixes admin queue LIVE setting] Signed-off-by: Sagi Grimberg --- drivers/nvme/host/rdma.c | 31 ++++++++++++++++++++++++++++++- 1 file changed, 30 insertions(+), 1 deletion(-) diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c index 5a8388177959..438d6948895f 100644 --- a/drivers/nvme/host/rdma.c +++ b/drivers/nvme/host/rdma.c @@ -83,6 +83,7 @@ enum nvme_rdma_queue_flags { NVME_RDMA_Q_CONNECTED = (1 << 0), NVME_RDMA_IB_QUEUE_ALLOCATED = (1 << 1), NVME_RDMA_Q_DELETING = (1 << 2), + NVME_RDMA_Q_LIVE = (1 << 3), }; struct nvme_rdma_queue { @@ -626,6 +627,7 @@ static int nvme_rdma_connect_io_queues(struct nvme_rdma_ctrl *ctrl) ret = nvmf_connect_io_queue(&ctrl->ctrl, i); if (ret) break; + set_bit(NVME_RDMA_Q_LIVE, &ctrl->queues[i].flags); } return ret; @@ -712,6 +714,8 @@ static void nvme_rdma_reconnect_ctrl_work(struct work_struct *work) if (ret) goto stop_admin_q; + set_bit(NVME_RDMA_Q_LIVE, &ctrl->queues[0].flags); + ret = nvme_enable_ctrl(&ctrl->ctrl, ctrl->cap); if (ret) goto stop_admin_q; @@ -761,8 +765,10 @@ static void nvme_rdma_error_recovery_work(struct work_struct *work) nvme_stop_keep_alive(&ctrl->ctrl); - for (i = 0; i < ctrl->queue_count; i++) + for (i = 0; i < ctrl->queue_count; i++) { clear_bit(NVME_RDMA_Q_CONNECTED, &ctrl->queues[i].flags); + clear_bit(NVME_RDMA_Q_LIVE, &ctrl->queues[i].flags); + } if (ctrl->queue_count > 1) nvme_stop_queues(&ctrl->ctrl); @@ -1378,6 +1384,24 @@ nvme_rdma_timeout(struct request *rq, bool reserved) return BLK_EH_HANDLED; } +/* + * We cannot accept any other command until the Connect command has completed. + */ +static inline bool nvme_rdma_queue_is_ready(struct nvme_rdma_queue *queue, + struct request *rq) +{ + if (unlikely(!test_bit(NVME_RDMA_Q_LIVE, &queue->flags))) { + struct nvme_command *cmd = (struct nvme_command *)rq->cmd; + + if (rq->cmd_type != REQ_TYPE_DRV_PRIV || + cmd->common.opcode != nvme_fabrics_command || + cmd->fabrics.fctype != nvme_fabrics_type_connect) + return false; + } + + return true; +} + static int nvme_rdma_queue_rq(struct blk_mq_hw_ctx *hctx, const struct blk_mq_queue_data *bd) { @@ -1394,6 +1418,9 @@ static int nvme_rdma_queue_rq(struct blk_mq_hw_ctx *hctx, WARN_ON_ONCE(rq->tag < 0); + if (!nvme_rdma_queue_is_ready(queue, rq)) + return BLK_MQ_RQ_QUEUE_BUSY; + dev = queue->device->dev; ib_dma_sync_single_for_cpu(dev, sqe->dma, sizeof(struct nvme_command), DMA_TO_DEVICE); @@ -1544,6 +1571,8 @@ static int nvme_rdma_configure_admin_queue(struct nvme_rdma_ctrl *ctrl) if (error) goto out_cleanup_queue; + set_bit(NVME_RDMA_Q_LIVE, &ctrl->queues[0].flags); + error = nvmf_reg_read64(&ctrl->ctrl, NVME_REG_CAP, &ctrl->cap); if (error) { dev_err(ctrl->ctrl.device, From 8242ddac1bfcf6eb8873b4d0a4e7a172c2b5b625 Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Sun, 6 Nov 2016 11:03:30 +0200 Subject: [PATCH 597/792] nvmet: Don't queue fatal error work if csts.cfs is set In the transport, in case of an interal queue error like error completion in rdma we trigger a fatal error. However, multiple queues in the same controller can serr error completions and we don't want to trigger fatal error work more than once. Reviewed-by: Christoph Hellwig Signed-off-by: Sagi Grimberg --- drivers/nvme/target/core.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/nvme/target/core.c b/drivers/nvme/target/core.c index b4cacb6f0258..a21437a33adb 100644 --- a/drivers/nvme/target/core.c +++ b/drivers/nvme/target/core.c @@ -838,9 +838,13 @@ static void nvmet_fatal_error_handler(struct work_struct *work) void nvmet_ctrl_fatal_error(struct nvmet_ctrl *ctrl) { - ctrl->csts |= NVME_CSTS_CFS; - INIT_WORK(&ctrl->fatal_err_work, nvmet_fatal_error_handler); - schedule_work(&ctrl->fatal_err_work); + mutex_lock(&ctrl->lock); + if (!(ctrl->csts & NVME_CSTS_CFS)) { + ctrl->csts |= NVME_CSTS_CFS; + INIT_WORK(&ctrl->fatal_err_work, nvmet_fatal_error_handler); + schedule_work(&ctrl->fatal_err_work); + } + mutex_unlock(&ctrl->lock); } EXPORT_SYMBOL_GPL(nvmet_ctrl_fatal_error); From 766dbb179d41d6337fed2b3ca00caa5845d298ce Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Sun, 6 Nov 2016 11:09:49 +0200 Subject: [PATCH 598/792] nvmet-rdma: don't forget to delete a queue from the list of connection failed In case we accepted a queue connection and it failed, we might not remove the queue from the list until we unload and clean it up. We should delete it from the queue list on the relevant handler. Signed-off-by: Sagi Grimberg --- drivers/nvme/target/rdma.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/nvme/target/rdma.c b/drivers/nvme/target/rdma.c index cf60759cc169..8c06675c2305 100644 --- a/drivers/nvme/target/rdma.c +++ b/drivers/nvme/target/rdma.c @@ -1066,6 +1066,7 @@ nvmet_rdma_alloc_queue(struct nvmet_rdma_device *ndev, spin_lock_init(&queue->rsp_wr_wait_lock); INIT_LIST_HEAD(&queue->free_rsps); spin_lock_init(&queue->rsps_lock); + INIT_LIST_HEAD(&queue->queue_list); queue->idx = ida_simple_get(&nvmet_rdma_queue_ida, 0, 0, GFP_KERNEL); if (queue->idx < 0) { @@ -1269,7 +1270,12 @@ static void nvmet_rdma_queue_connect_fail(struct rdma_cm_id *cm_id, { WARN_ON_ONCE(queue->state != NVMET_RDMA_Q_CONNECTING); - pr_err("failed to connect queue\n"); + mutex_lock(&nvmet_rdma_queue_mutex); + if (!list_empty(&queue->queue_list)) + list_del_init(&queue->queue_list); + mutex_unlock(&nvmet_rdma_queue_mutex); + + pr_err("failed to connect queue %d\n", queue->idx); schedule_work(&queue->release_work); } From c8dbc37cd81d4705fce51123f5d81ea3267a5b88 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Tue, 8 Nov 2016 09:16:02 -0800 Subject: [PATCH 599/792] nvme-rdma: stop and free io queues on connect failure While testing nvme-rdma with the spdk nvmf target over iw_cxgb4, I configured the target (mistakenly) to generate an error creating the NVMF IO queues. This resulted a "Invalid SQE Parameter" error sent back to the host on the first IO queue connect: [ 9610.928182] nvme nvme1: queue_size 128 > ctrl maxcmd 120, clamping down [ 9610.938745] nvme nvme1: creating 32 I/O queues. So nvmf_connect_io_queue() returns an error to nvmf_connect_io_queue() / nvmf_connect_io_queues(), and that is returned to nvme_rdma_create_io_queues(). In the error path, nvmf_rdma_create_io_queues() frees the queue tagset memory _before_ stopping and freeing the IB queues, which causes yet another touch-after-free crash due to SQ CQEs being flushed after the ib_cqe structs pointed-to by the flushed WRs have been freed (since they are part of the nvme_rdma_request struct). The fix is to stop and free the queues in nvmf_connect_io_queues() if there is an error connecting any of the queues. Signed-off-by: Steve Wise Signed-off-by: Sagi Grimberg --- drivers/nvme/host/rdma.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c index 438d6948895f..3d25add36d91 100644 --- a/drivers/nvme/host/rdma.c +++ b/drivers/nvme/host/rdma.c @@ -625,11 +625,18 @@ static int nvme_rdma_connect_io_queues(struct nvme_rdma_ctrl *ctrl) for (i = 1; i < ctrl->queue_count; i++) { ret = nvmf_connect_io_queue(&ctrl->ctrl, i); - if (ret) - break; + if (ret) { + dev_info(ctrl->ctrl.device, + "failed to connect i/o queue: %d\n", ret); + goto out_free_queues; + } set_bit(NVME_RDMA_Q_LIVE, &ctrl->queues[i].flags); } + return 0; + +out_free_queues: + nvme_rdma_free_io_queues(ctrl); return ret; } From 14c862dbb0a0e0a9baec20480d441e32cb54b2b9 Mon Sep 17 00:00:00 2001 From: Sagi Grimberg Date: Sun, 6 Nov 2016 11:03:59 +0200 Subject: [PATCH 600/792] nvmet-rdma: drain the queue-pair just before freeing it draining the qp right after disconnect might not suffice because the nvmet sq is not fully drained (in nvmet_sq_destroy) and we might see completions after the drain. Instead, drain right before the qp destroy which comes after the sq destruction and we can be sure that no posts come after the drain. Tested-by: Steve Wise Signed-off-by: Sagi Grimberg --- drivers/nvme/target/rdma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/nvme/target/rdma.c b/drivers/nvme/target/rdma.c index 8c06675c2305..005ef5d17a19 100644 --- a/drivers/nvme/target/rdma.c +++ b/drivers/nvme/target/rdma.c @@ -951,6 +951,7 @@ err_destroy_cq: static void nvmet_rdma_destroy_queue_ib(struct nvmet_rdma_queue *queue) { + ib_drain_qp(queue->cm_id->qp); rdma_destroy_qp(queue->cm_id); ib_free_cq(queue->cq); } @@ -1245,7 +1246,6 @@ static void __nvmet_rdma_queue_disconnect(struct nvmet_rdma_queue *queue) if (disconnect) { rdma_disconnect(queue->cm_id); - ib_drain_qp(queue->cm_id->qp); schedule_work(&queue->release_work); } } From f732c5b7c734cfc2c563c918fe2842175c7eb073 Mon Sep 17 00:00:00 2001 From: Axl-zhang Date: Wed, 2 Nov 2016 13:31:12 +0800 Subject: [PATCH 601/792] dmaengine: sun6i: fix the uninitialized value for v_lli dma_pool_alloc does not initialize the value of the newly allocated block for the v_lli, and the uninitilize value make the tests failed which is on pine64 with dmatest. we can fix it just change the "|=" to "=" for the v_lli->cfg. Signed-off-by: Hao Zhang Acked-by: Maxime Ripard Signed-off-by: Vinod Koul --- drivers/dma/sun6i-dma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c index 83461994e418..a2358780ab2c 100644 --- a/drivers/dma/sun6i-dma.c +++ b/drivers/dma/sun6i-dma.c @@ -578,7 +578,7 @@ static struct dma_async_tx_descriptor *sun6i_dma_prep_dma_memcpy( burst = convert_burst(8); width = convert_buswidth(DMA_SLAVE_BUSWIDTH_4_BYTES); - v_lli->cfg |= DMA_CHAN_CFG_SRC_DRQ(DRQ_SDRAM) | + v_lli->cfg = DMA_CHAN_CFG_SRC_DRQ(DRQ_SDRAM) | DMA_CHAN_CFG_DST_DRQ(DRQ_SDRAM) | DMA_CHAN_CFG_DST_LINEAR_MODE | DMA_CHAN_CFG_SRC_LINEAR_MODE | From 12f5908080bdccca2cb2f7ad850cb360c92f481a Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 9 Nov 2016 09:47:58 -0700 Subject: [PATCH 602/792] dmaengine: cppi41: Fix list not empty warning on module removal If musb controller is configured with USB peripherals and we have enumerated with a USB host, we can get warnings on removal of the modules: WARNING: CPU: 0 PID: 1269 at drivers/dma/cppi41.c:391 cppi41_dma_free_chan_resources Fix the issue by adding the missing pm_runtime_get to cppi41_dma_free_chan_resources to make sure the pending work list is cleared on removal. Fixes: fdea2d09b997 ("dmaengine: cppi41: Add basic PM runtime support") Signed-off-by: Tony Lindgren Signed-off-by: Vinod Koul --- drivers/dma/cppi41.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/dma/cppi41.c b/drivers/dma/cppi41.c index bac5f023013b..6ed99d926358 100644 --- a/drivers/dma/cppi41.c +++ b/drivers/dma/cppi41.c @@ -1072,7 +1072,12 @@ err_get_sync: static int cppi41_dma_remove(struct platform_device *pdev) { struct cppi41_dd *cdd = platform_get_drvdata(pdev); + int error; + error = pm_runtime_get_sync(&pdev->dev); + if (error < 0) + dev_err(&pdev->dev, "%s could not pm_runtime_get: %i\n", + __func__, error); of_dma_controller_free(pdev->dev.of_node); dma_async_device_unregister(&cdd->ddev); From 098de42ad6708866501a00155ba85350bc0b29e5 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 9 Nov 2016 09:47:59 -0700 Subject: [PATCH 603/792] dmaengine: cppi41: Fix unpaired pm runtime when only a USB hub is connected On am335x with musb host we can end up with unpaired pm runtime calls if a hub with no devices is connected and disconnected. This is because of the conditional pm runtime calls which are always a bad idea. Let's fix the issue by making them unconditional and paired in each function. Fixes: fdea2d09b997 ("dmaengine: cppi41: Add basic PM runtime support") Signed-off-by: Tony Lindgren Signed-off-by: Vinod Koul --- drivers/dma/cppi41.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/dma/cppi41.c b/drivers/dma/cppi41.c index 6ed99d926358..3d2d8b5a6c91 100644 --- a/drivers/dma/cppi41.c +++ b/drivers/dma/cppi41.c @@ -318,6 +318,11 @@ static irqreturn_t cppi41_irq(int irq, void *data) while (val) { u32 desc, len; + status = pm_runtime_get(cdd->ddev.dev); + if (status < 0) + dev_err(cdd->ddev.dev, "%s pm runtime get: %i\n", + __func__, status); + q_num = __fls(val); val &= ~(1 << q_num); q_num += 32 * i; @@ -338,7 +343,6 @@ static irqreturn_t cppi41_irq(int irq, void *data) dma_cookie_complete(&c->txd); dmaengine_desc_get_callback_invoke(&c->txd, NULL); - /* Paired with cppi41_dma_issue_pending */ pm_runtime_mark_last_busy(cdd->ddev.dev); pm_runtime_put_autosuspend(cdd->ddev.dev); } @@ -460,7 +464,6 @@ static void cppi41_dma_issue_pending(struct dma_chan *chan) struct cppi41_dd *cdd = c->cdd; int error; - /* PM runtime paired with dmaengine_desc_get_callback_invoke */ error = pm_runtime_get(cdd->ddev.dev); if ((error != -EINPROGRESS) && error < 0) { dev_err(cdd->ddev.dev, "Failed to pm_runtime_get: %i\n", @@ -473,6 +476,9 @@ static void cppi41_dma_issue_pending(struct dma_chan *chan) push_desc_queue(c); else pending_desc(c); + + pm_runtime_mark_last_busy(cdd->ddev.dev); + pm_runtime_put_autosuspend(cdd->ddev.dev); } static u32 get_host_pd0(u32 length) From 740b4be3f742100ea66f0f9ee9715b10ee304a90 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 11 Nov 2016 11:28:52 -0800 Subject: [PATCH 604/792] dmaengine: cpp41: Fix handling of error path If we return early on pm_runtime_get() error, we need to also call pm_runtime_put_noidle() as pointed out in a musb related thread by Johan Hovold . This is to keep the PM runtime use counts happy. Fixes: fdea2d09b997 ("dmaengine: cppi41: Add basic PM runtime support") Cc: Johan Hovold Signed-off-by: Tony Lindgren Signed-off-by: Vinod Koul --- drivers/dma/cppi41.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/dma/cppi41.c b/drivers/dma/cppi41.c index 3d2d8b5a6c91..4b52126c13cf 100644 --- a/drivers/dma/cppi41.c +++ b/drivers/dma/cppi41.c @@ -366,8 +366,11 @@ static int cppi41_dma_alloc_chan_resources(struct dma_chan *chan) int error; error = pm_runtime_get_sync(cdd->ddev.dev); - if (error < 0) + if (error < 0) { + pm_runtime_put_noidle(cdd->ddev.dev); + return error; + } dma_cookie_init(chan); dma_async_tx_descriptor_init(&c->txd, chan); @@ -389,8 +392,11 @@ static void cppi41_dma_free_chan_resources(struct dma_chan *chan) int error; error = pm_runtime_get_sync(cdd->ddev.dev); - if (error < 0) + if (error < 0) { + pm_runtime_put_noidle(cdd->ddev.dev); + return; + } WARN_ON(!list_empty(&cdd->pending)); @@ -466,6 +472,7 @@ static void cppi41_dma_issue_pending(struct dma_chan *chan) error = pm_runtime_get(cdd->ddev.dev); if ((error != -EINPROGRESS) && error < 0) { + pm_runtime_put_noidle(cdd->ddev.dev); dev_err(cdd->ddev.dev, "Failed to pm_runtime_get: %i\n", error); From ea08e39230e898844d9de5b60cdbb30067cebfe7 Mon Sep 17 00:00:00 2001 From: Scott Mayhew Date: Fri, 11 Nov 2016 13:16:22 -0500 Subject: [PATCH 605/792] sunrpc: svc_age_temp_xprts_now should not call setsockopt non-tcp transports This fixes the following panic that can occur with NFSoRDMA. general protection fault: 0000 [#1] SMP Modules linked in: rpcrdma ib_isert iscsi_target_mod ib_iser libiscsi scsi_transport_iscsi ib_srpt target_core_mod ib_srp scsi_transport_srp scsi_tgt ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm mlx5_ib ib_core intel_powerclamp coretemp kvm_intel kvm sg ioatdma ipmi_devintf ipmi_ssif dcdbas iTCO_wdt iTCO_vendor_support pcspkr irqbypass sb_edac shpchp dca crc32_pclmul ghash_clmulni_intel edac_core lpc_ich aesni_intel lrw gf128mul glue_helper ablk_helper mei_me mei ipmi_si cryptd wmi ipmi_msghandler acpi_pad acpi_power_meter nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt ahci fb_sys_fops ttm libahci mlx5_core tg3 crct10dif_pclmul drm crct10dif_common ptp i2c_core libata crc32c_intel pps_core fjes dm_mirror dm_region_hash dm_log dm_mod CPU: 1 PID: 120 Comm: kworker/1:1 Not tainted 3.10.0-514.el7.x86_64 #1 Hardware name: Dell Inc. PowerEdge R320/0KM5PX, BIOS 2.4.2 01/29/2015 Workqueue: events check_lifetime task: ffff88031f506dd0 ti: ffff88031f584000 task.ti: ffff88031f584000 RIP: 0010:[] [] _raw_spin_lock_bh+0x17/0x50 RSP: 0018:ffff88031f587ba8 EFLAGS: 00010206 RAX: 0000000000020000 RBX: 20041fac02080072 RCX: ffff88031f587fd8 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 20041fac02080072 RBP: ffff88031f587bb0 R08: 0000000000000008 R09: ffffffff8155be77 R10: ffff880322a59b00 R11: ffffea000bf39f00 R12: 20041fac02080072 R13: 000000000000000d R14: ffff8800c4fbd800 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff880322a40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f3c52d4547e CR3: 00000000019ba000 CR4: 00000000001407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: 20041fac02080002 ffff88031f587bd0 ffffffff81557830 20041fac02080002 ffff88031f587c78 ffff88031f587c40 ffffffff8155ae08 000000010157df32 0000000800000001 ffff88031f587c20 ffffffff81096acb ffffffff81aa37d0 Call Trace: [] lock_sock_nested+0x20/0x50 [] sock_setsockopt+0x78/0x940 [] ? lock_timer_base.isra.33+0x2b/0x50 [] kernel_setsockopt+0x4d/0x50 [] svc_age_temp_xprts_now+0x174/0x1e0 [sunrpc] [] nfsd_inetaddr_event+0x9d/0xd0 [nfsd] [] notifier_call_chain+0x4c/0x70 [] __blocking_notifier_call_chain+0x4d/0x70 [] blocking_notifier_call_chain+0x16/0x20 [] __inet_del_ifa+0x168/0x2d0 [] check_lifetime+0x25f/0x270 [] process_one_work+0x17b/0x470 [] worker_thread+0x126/0x410 [] ? rescuer_thread+0x460/0x460 [] kthread+0xcf/0xe0 [] ? kthread_create_on_node+0x140/0x140 [] ret_from_fork+0x58/0x90 [] ? kthread_create_on_node+0x140/0x140 Code: ca 75 f1 5d c3 0f 1f 80 00 00 00 00 eb d9 66 0f 1f 44 00 00 0f 1f 44 00 00 55 48 89 e5 53 48 89 fb e8 7e 04 a0 ff b8 00 00 02 00 0f c1 03 89 c2 c1 ea 10 66 39 c2 75 03 5b 5d c3 83 e2 fe 0f RIP [] _raw_spin_lock_bh+0x17/0x50 RSP Signed-off-by: Scott Mayhew Fixes: c3d4879e ("sunrpc: Add a function to close temporary transports immediately") Reviewed-by: Chuck Lever Signed-off-by: J. Bruce Fields --- include/linux/sunrpc/svc_xprt.h | 1 + net/sunrpc/svc_xprt.c | 11 +---------- net/sunrpc/svcsock.c | 21 +++++++++++++++++++++ net/sunrpc/xprtrdma/svc_rdma_transport.c | 6 ++++++ 4 files changed, 29 insertions(+), 10 deletions(-) diff --git a/include/linux/sunrpc/svc_xprt.h b/include/linux/sunrpc/svc_xprt.h index ab02a457da1f..e5d193440374 100644 --- a/include/linux/sunrpc/svc_xprt.h +++ b/include/linux/sunrpc/svc_xprt.h @@ -25,6 +25,7 @@ struct svc_xprt_ops { void (*xpo_detach)(struct svc_xprt *); void (*xpo_free)(struct svc_xprt *); int (*xpo_secure_port)(struct svc_rqst *); + void (*xpo_kill_temp_xprt)(struct svc_xprt *); }; struct svc_xprt_class { diff --git a/net/sunrpc/svc_xprt.c b/net/sunrpc/svc_xprt.c index c3f652395a80..3bc1d61694cb 100644 --- a/net/sunrpc/svc_xprt.c +++ b/net/sunrpc/svc_xprt.c @@ -1002,14 +1002,8 @@ static void svc_age_temp_xprts(unsigned long closure) void svc_age_temp_xprts_now(struct svc_serv *serv, struct sockaddr *server_addr) { struct svc_xprt *xprt; - struct svc_sock *svsk; - struct socket *sock; struct list_head *le, *next; LIST_HEAD(to_be_closed); - struct linger no_linger = { - .l_onoff = 1, - .l_linger = 0, - }; spin_lock_bh(&serv->sv_lock); list_for_each_safe(le, next, &serv->sv_tempsocks) { @@ -1027,10 +1021,7 @@ void svc_age_temp_xprts_now(struct svc_serv *serv, struct sockaddr *server_addr) list_del_init(le); xprt = list_entry(le, struct svc_xprt, xpt_list); dprintk("svc_age_temp_xprts_now: closing %p\n", xprt); - svsk = container_of(xprt, struct svc_sock, sk_xprt); - sock = svsk->sk_sock; - kernel_setsockopt(sock, SOL_SOCKET, SO_LINGER, - (char *)&no_linger, sizeof(no_linger)); + xprt->xpt_ops->xpo_kill_temp_xprt(xprt); svc_close_xprt(xprt); } } diff --git a/net/sunrpc/svcsock.c b/net/sunrpc/svcsock.c index 57625f64efd5..a4bc98265d88 100644 --- a/net/sunrpc/svcsock.c +++ b/net/sunrpc/svcsock.c @@ -438,6 +438,21 @@ static int svc_tcp_has_wspace(struct svc_xprt *xprt) return !test_bit(SOCK_NOSPACE, &svsk->sk_sock->flags); } +static void svc_tcp_kill_temp_xprt(struct svc_xprt *xprt) +{ + struct svc_sock *svsk; + struct socket *sock; + struct linger no_linger = { + .l_onoff = 1, + .l_linger = 0, + }; + + svsk = container_of(xprt, struct svc_sock, sk_xprt); + sock = svsk->sk_sock; + kernel_setsockopt(sock, SOL_SOCKET, SO_LINGER, + (char *)&no_linger, sizeof(no_linger)); +} + /* * See net/ipv6/ip_sockglue.c : ip_cmsg_recv_pktinfo */ @@ -648,6 +663,10 @@ static struct svc_xprt *svc_udp_accept(struct svc_xprt *xprt) return NULL; } +static void svc_udp_kill_temp_xprt(struct svc_xprt *xprt) +{ +} + static struct svc_xprt *svc_udp_create(struct svc_serv *serv, struct net *net, struct sockaddr *sa, int salen, @@ -667,6 +686,7 @@ static struct svc_xprt_ops svc_udp_ops = { .xpo_has_wspace = svc_udp_has_wspace, .xpo_accept = svc_udp_accept, .xpo_secure_port = svc_sock_secure_port, + .xpo_kill_temp_xprt = svc_udp_kill_temp_xprt, }; static struct svc_xprt_class svc_udp_class = { @@ -1242,6 +1262,7 @@ static struct svc_xprt_ops svc_tcp_ops = { .xpo_has_wspace = svc_tcp_has_wspace, .xpo_accept = svc_tcp_accept, .xpo_secure_port = svc_sock_secure_port, + .xpo_kill_temp_xprt = svc_tcp_kill_temp_xprt, }; static struct svc_xprt_class svc_tcp_class = { diff --git a/net/sunrpc/xprtrdma/svc_rdma_transport.c b/net/sunrpc/xprtrdma/svc_rdma_transport.c index 6864fb967038..1334de2715c2 100644 --- a/net/sunrpc/xprtrdma/svc_rdma_transport.c +++ b/net/sunrpc/xprtrdma/svc_rdma_transport.c @@ -67,6 +67,7 @@ static void svc_rdma_detach(struct svc_xprt *xprt); static void svc_rdma_free(struct svc_xprt *xprt); static int svc_rdma_has_wspace(struct svc_xprt *xprt); static int svc_rdma_secure_port(struct svc_rqst *); +static void svc_rdma_kill_temp_xprt(struct svc_xprt *); static struct svc_xprt_ops svc_rdma_ops = { .xpo_create = svc_rdma_create, @@ -79,6 +80,7 @@ static struct svc_xprt_ops svc_rdma_ops = { .xpo_has_wspace = svc_rdma_has_wspace, .xpo_accept = svc_rdma_accept, .xpo_secure_port = svc_rdma_secure_port, + .xpo_kill_temp_xprt = svc_rdma_kill_temp_xprt, }; struct svc_xprt_class svc_rdma_class = { @@ -1317,6 +1319,10 @@ static int svc_rdma_secure_port(struct svc_rqst *rqstp) return 1; } +static void svc_rdma_kill_temp_xprt(struct svc_xprt *xprt) +{ +} + int svc_rdma_send(struct svcxprt_rdma *xprt, struct ib_send_wr *wr) { struct ib_send_wr *bad_wr, *n_wr; From b15efc38626f20f3fc8b831b826b50740d90dab9 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 14 Nov 2016 11:14:37 -0200 Subject: [PATCH 606/792] gp8psk-fe: add missing MODULE_foo() macros This file was converted to a separate module at commit 7a0786c19d65 ("gp8psk: Fix DVB frontend attach"), because the DVB attach routines require it to work. However, I forgot to copy the MODULE_foo() macros from the original module, causing this warning: WARNING: modpost: missing MODULE_LICENSE() in drivers/media/dvb-frontends/gp8psk-fe.o Reported-by: Stephen Rothwell Fixes: 7a0786c19d65 ("gp8psk: Fix DVB frontend attach") Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Linus Torvalds --- drivers/media/dvb-frontends/gp8psk-fe.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/media/dvb-frontends/gp8psk-fe.c b/drivers/media/dvb-frontends/gp8psk-fe.c index be19afeed7a9..93f59bfea092 100644 --- a/drivers/media/dvb-frontends/gp8psk-fe.c +++ b/drivers/media/dvb-frontends/gp8psk-fe.c @@ -1,5 +1,5 @@ -/* DVB USB compliant Linux driver for the - * - GENPIX 8pks/qpsk/DCII USB2.0 DVB-S module +/* + * Frontend driver for the GENPIX 8pks/qpsk/DCII USB2.0 DVB-S module * * Copyright (C) 2006,2007 Alan Nisota (alannisota@gmail.com) * Copyright (C) 2006,2007 Genpix Electronics (genpix@genpix-electronics.com) @@ -8,11 +8,9 @@ * * This module is based off the vp7045 and vp702x modules * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation, version 2. - * - * see Documentation/dvb/README.dvb-usb for more information + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt @@ -395,3 +393,8 @@ static struct dvb_frontend_ops gp8psk_fe_ops = { .dishnetwork_send_legacy_command = gp8psk_fe_send_legacy_dish_cmd, .enable_high_lnb_voltage = gp8psk_fe_enable_high_lnb_voltage }; + +MODULE_AUTHOR("Alan Nisota "); +MODULE_DESCRIPTION("Frontend Driver for Genpix DVB-S"); +MODULE_VERSION("1.1"); +MODULE_LICENSE("GPL"); From 93d710a65ef02fb7fd48ae207e78f460bd7a6089 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 14 Nov 2016 15:34:17 +0100 Subject: [PATCH 607/792] i2c: mux: fix up dependencies We get the following build error from UM Linux after adding an entry to drivers/iio/gyro/Kconfig that issues "select I2C_MUX": ERROR: "devm_ioremap_resource" [drivers/i2c/muxes/i2c-mux-reg.ko] undefined! ERROR: "of_address_to_resource" [drivers/i2c/muxes/i2c-mux-reg.ko] undefined! It appears that the I2C mux core code depends on HAS_IOMEM for historical reasons, while CONFIG_I2C_MUX_REG does *not* have a direct dependency on HAS_IOMEM. This creates a situation where a allyesconfig or allmodconfig for UM Linux will select I2C_MUX, and will implicitly enable I2C_MUX_REG as well, and the compilation will fail for the register driver. Fix this up by making I2C_MUX_REG depend on HAS_IOMEM and removing the dependency from I2C_MUX. Reported-by: kbuild test robot Reported-by: Jonathan Cameron Signed-off-by: Linus Walleij Acked-by: Jonathan Cameron Acked-by: Peter Rosin Signed-off-by: Wolfram Sang Cc: stable@kernel.org --- drivers/i2c/Kconfig | 1 - drivers/i2c/muxes/Kconfig | 1 + 2 files changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig index d223650a97e4..11edabf425ae 100644 --- a/drivers/i2c/Kconfig +++ b/drivers/i2c/Kconfig @@ -59,7 +59,6 @@ config I2C_CHARDEV config I2C_MUX tristate "I2C bus multiplexing support" - depends on HAS_IOMEM help Say Y here if you want the I2C core to support the ability to handle multiplexed I2C bus topologies, by presenting each diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig index e280c8ecc0b5..96de9ce5669b 100644 --- a/drivers/i2c/muxes/Kconfig +++ b/drivers/i2c/muxes/Kconfig @@ -63,6 +63,7 @@ config I2C_MUX_PINCTRL config I2C_MUX_REG tristate "Register-based I2C multiplexer" + depends on HAS_IOMEM help If you say yes to this option, support will be included for a register based I2C multiplexer. This driver provides access to From f5c9f9c72395c3291c2e35c905dedae2b98475a4 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 14 Nov 2016 09:31:52 -0800 Subject: [PATCH 608/792] Revert "printk: make reading the kernel log flush pending lines" This reverts commit bfd8d3f23b51018388be0411ccbc2d56277fe294. It turns out that this flushes things much too aggressiverly, and causes lines to break up when the system logger races with new continuation lines being printed. There's a pending patch to make printk() flushing much more straightforward, but it's too invasive for 4.9, so in the meantime let's just not make the system message logging flush continuation lines. They'll be flushed by the final newline anyway. Suggested-by: Petr Mladek Signed-off-by: Linus Torvalds --- kernel/printk/printk.c | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c index 5028f4fd504a..f7a55e9ff2f7 100644 --- a/kernel/printk/printk.c +++ b/kernel/printk/printk.c @@ -783,8 +783,6 @@ static ssize_t devkmsg_write(struct kiocb *iocb, struct iov_iter *from) return ret; } -static void cont_flush(void); - static ssize_t devkmsg_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) { @@ -800,7 +798,6 @@ static ssize_t devkmsg_read(struct file *file, char __user *buf, if (ret) return ret; raw_spin_lock_irq(&logbuf_lock); - cont_flush(); while (user->seq == log_next_seq) { if (file->f_flags & O_NONBLOCK) { ret = -EAGAIN; @@ -863,7 +860,6 @@ static loff_t devkmsg_llseek(struct file *file, loff_t offset, int whence) return -ESPIPE; raw_spin_lock_irq(&logbuf_lock); - cont_flush(); switch (whence) { case SEEK_SET: /* the first record */ @@ -902,7 +898,6 @@ static unsigned int devkmsg_poll(struct file *file, poll_table *wait) poll_wait(file, &log_wait, wait); raw_spin_lock_irq(&logbuf_lock); - cont_flush(); if (user->seq < log_next_seq) { /* return error when data has vanished underneath us */ if (user->seq < log_first_seq) @@ -1289,7 +1284,6 @@ static int syslog_print(char __user *buf, int size) size_t skip; raw_spin_lock_irq(&logbuf_lock); - cont_flush(); if (syslog_seq < log_first_seq) { /* messages are gone, move to first one */ syslog_seq = log_first_seq; @@ -1349,7 +1343,6 @@ static int syslog_print_all(char __user *buf, int size, bool clear) return -ENOMEM; raw_spin_lock_irq(&logbuf_lock); - cont_flush(); if (buf) { u64 next_seq; u64 seq; @@ -1511,7 +1504,6 @@ int do_syslog(int type, char __user *buf, int len, int source) /* Number of chars in the log buffer */ case SYSLOG_ACTION_SIZE_UNREAD: raw_spin_lock_irq(&logbuf_lock); - cont_flush(); if (syslog_seq < log_first_seq) { /* messages are gone, move to first one */ syslog_seq = log_first_seq; @@ -3028,7 +3020,6 @@ void kmsg_dump(enum kmsg_dump_reason reason) dumper->active = true; raw_spin_lock_irqsave(&logbuf_lock, flags); - cont_flush(); dumper->cur_seq = clear_seq; dumper->cur_idx = clear_idx; dumper->next_seq = log_next_seq; @@ -3119,7 +3110,6 @@ bool kmsg_dump_get_line(struct kmsg_dumper *dumper, bool syslog, bool ret; raw_spin_lock_irqsave(&logbuf_lock, flags); - cont_flush(); ret = kmsg_dump_get_line_nolock(dumper, syslog, line, size, len); raw_spin_unlock_irqrestore(&logbuf_lock, flags); @@ -3162,7 +3152,6 @@ bool kmsg_dump_get_buffer(struct kmsg_dumper *dumper, bool syslog, goto out; raw_spin_lock_irqsave(&logbuf_lock, flags); - cont_flush(); if (dumper->cur_seq < log_first_seq) { /* messages are gone, move to first available one */ dumper->cur_seq = log_first_seq; From ee2bd216e1fa9fa980e6ac702e5973d157c40c48 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 14 Nov 2016 09:46:08 -0800 Subject: [PATCH 609/792] ASoC: lpass-platform: fix uninitialized variable In commit 022d00ee0b55 ("ASoC: lpass-platform: Fix broken pcm data usage") the stream specific information initialization was broken, with the dma channel information not being initialized if there was no alloc_dma_channel() helper function. Before that, the DMA channel number was implicitly initialized to zero because the backing store was allocated with devm_kzalloc(). When the init code was rewritten, that implicit initialization was lost, and gcc rightfully complains about an uninitialized variable being used. Cc: Srinivas Kandagatla Cc: Mark Brown Signed-off-by: Linus Torvalds --- sound/soc/qcom/lpass-platform.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/qcom/lpass-platform.c b/sound/soc/qcom/lpass-platform.c index 07000f53db44..b392e51de94d 100644 --- a/sound/soc/qcom/lpass-platform.c +++ b/sound/soc/qcom/lpass-platform.c @@ -75,6 +75,7 @@ static int lpass_platform_pcmops_open(struct snd_pcm_substream *substream) data->i2s_port = cpu_dai->driver->id; runtime->private_data = data; + dma_ch = 0; if (v->alloc_dma_channel) dma_ch = v->alloc_dma_channel(drvdata, dir); if (dma_ch < 0) From 7020637bdf59589a403e01aca128bef643404317 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Sat, 12 Nov 2016 17:20:30 +0000 Subject: [PATCH 610/792] ps3_gelic: fix spelling mistake in debug message Trivial fix to spelling mistake "unmached" to "unmatched" in debug message. Signed-off-by: Colin Ian King Signed-off-by: David S. Miller --- drivers/net/ethernet/toshiba/ps3_gelic_wireless.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/toshiba/ps3_gelic_wireless.c b/drivers/net/ethernet/toshiba/ps3_gelic_wireless.c index 446ea580ad42..928c1dca2673 100644 --- a/drivers/net/ethernet/toshiba/ps3_gelic_wireless.c +++ b/drivers/net/ethernet/toshiba/ps3_gelic_wireless.c @@ -1694,7 +1694,7 @@ struct gelic_wl_scan_info *gelic_wl_find_best_bss(struct gelic_wl_info *wl) pr_debug("%s: bssid matched\n", __func__); break; } else { - pr_debug("%s: bssid unmached\n", __func__); + pr_debug("%s: bssid unmatched\n", __func__); continue; } } From 87a349f9cc0908bc0cfac0c9ece3179f650ae95a Mon Sep 17 00:00:00 2001 From: Thomas Tai Date: Fri, 11 Nov 2016 16:41:00 -0800 Subject: [PATCH 611/792] sparc64: fix compile warning section mismatch in find_node() A compile warning is introduced by a commit to fix the find_node(). This patch fix the compile warning by moving find_node() into __init section. Because find_node() is only used by memblock_nid_range() which is only used by a __init add_node_ranges(). find_node() and memblock_nid_range() should also be inside __init section. Signed-off-by: Thomas Tai Signed-off-by: David S. Miller --- arch/sparc/mm/init_64.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c index 068eb3dcbcb5..37aa537b3ad8 100644 --- a/arch/sparc/mm/init_64.c +++ b/arch/sparc/mm/init_64.c @@ -805,7 +805,7 @@ static int num_mblocks; static int find_numa_node_for_addr(unsigned long pa, struct node_mem_mask *pnode_mask); -static unsigned long ra_to_pa(unsigned long addr) +static unsigned long __init ra_to_pa(unsigned long addr) { int i; @@ -821,7 +821,7 @@ static unsigned long ra_to_pa(unsigned long addr) return addr; } -static int find_node(unsigned long addr) +static int __init find_node(unsigned long addr) { static bool search_mdesc = true; static struct node_mem_mask last_mem_mask = { ~0UL, ~0UL }; @@ -858,7 +858,7 @@ static int find_node(unsigned long addr) return last_index; } -static u64 memblock_nid_range(u64 start, u64 end, int *nid) +static u64 __init memblock_nid_range(u64 start, u64 end, int *nid) { *nid = find_node(start); start += PAGE_SIZE; From e2174b0c24caca170ca61eda2ae49c9561ff8896 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 14 Nov 2016 20:56:17 +0100 Subject: [PATCH 612/792] Revert "ACPICA: FADT support cleanup" Pavel Machek reports that commit 6ea8c546f365 (ACPICA: FADT support cleanup) breaks thermal management on his Thinkpad X60 and T40p, so revert it. Link: https://bugzilla.kernel.org/show_bug.cgi?id=187311 Fixes: 6ea8c546f365 (ACPICA: FADT support cleanup) Reported-by: Pavel Machek Signed-off-by: Rafael J. Wysocki --- drivers/acpi/acpica/tbfadt.c | 10 +-- include/acpi/actbl.h | 164 +++++++++++++++-------------------- 2 files changed, 74 insertions(+), 100 deletions(-) diff --git a/drivers/acpi/acpica/tbfadt.c b/drivers/acpi/acpica/tbfadt.c index 046c4d0394ee..5fb838e592dc 100644 --- a/drivers/acpi/acpica/tbfadt.c +++ b/drivers/acpi/acpica/tbfadt.c @@ -480,19 +480,17 @@ static void acpi_tb_convert_fadt(void) u32 i; /* - * For ACPI 1.0 FADTs (revision 1), ensure that reserved fields which + * For ACPI 1.0 FADTs (revision 1 or 2), ensure that reserved fields which * should be zero are indeed zero. This will workaround BIOSs that * inadvertently place values in these fields. * * The ACPI 1.0 reserved fields that will be zeroed are the bytes located * at offset 45, 55, 95, and the word located at offset 109, 110. * - * Note: The FADT revision value is unreliable because of BIOS errors. - * The table length is instead used as the final word on the version. - * - * Note: FADT revision 3 is the ACPI 2.0 version of the FADT. + * Note: The FADT revision value is unreliable. Only the length can be + * trusted. */ - if (acpi_gbl_FADT.header.length <= ACPI_FADT_V3_SIZE) { + if (acpi_gbl_FADT.header.length <= ACPI_FADT_V2_SIZE) { acpi_gbl_FADT.preferred_profile = 0; acpi_gbl_FADT.pstate_control = 0; acpi_gbl_FADT.cst_control = 0; diff --git a/include/acpi/actbl.h b/include/acpi/actbl.h index 1b949e08015c..c19700e2a2fe 100644 --- a/include/acpi/actbl.h +++ b/include/acpi/actbl.h @@ -230,72 +230,62 @@ struct acpi_table_facs { /* Fields common to all versions of the FADT */ struct acpi_table_fadt { - struct acpi_table_header header; /* [V1] Common ACPI table header */ - u32 facs; /* [V1] 32-bit physical address of FACS */ - u32 dsdt; /* [V1] 32-bit physical address of DSDT */ - u8 model; /* [V1] System Interrupt Model (ACPI 1.0) - not used in ACPI 2.0+ */ - u8 preferred_profile; /* [V1] Conveys preferred power management profile to OSPM. */ - u16 sci_interrupt; /* [V1] System vector of SCI interrupt */ - u32 smi_command; /* [V1] 32-bit Port address of SMI command port */ - u8 acpi_enable; /* [V1] Value to write to SMI_CMD to enable ACPI */ - u8 acpi_disable; /* [V1] Value to write to SMI_CMD to disable ACPI */ - u8 s4_bios_request; /* [V1] Value to write to SMI_CMD to enter S4BIOS state */ - u8 pstate_control; /* [V1] Processor performance state control */ - u32 pm1a_event_block; /* [V1] 32-bit port address of Power Mgt 1a Event Reg Blk */ - u32 pm1b_event_block; /* [V1] 32-bit port address of Power Mgt 1b Event Reg Blk */ - u32 pm1a_control_block; /* [V1] 32-bit port address of Power Mgt 1a Control Reg Blk */ - u32 pm1b_control_block; /* [V1] 32-bit port address of Power Mgt 1b Control Reg Blk */ - u32 pm2_control_block; /* [V1] 32-bit port address of Power Mgt 2 Control Reg Blk */ - u32 pm_timer_block; /* [V1] 32-bit port address of Power Mgt Timer Ctrl Reg Blk */ - u32 gpe0_block; /* [V1] 32-bit port address of General Purpose Event 0 Reg Blk */ - u32 gpe1_block; /* [V1] 32-bit port address of General Purpose Event 1 Reg Blk */ - u8 pm1_event_length; /* [V1] Byte Length of ports at pm1x_event_block */ - u8 pm1_control_length; /* [V1] Byte Length of ports at pm1x_control_block */ - u8 pm2_control_length; /* [V1] Byte Length of ports at pm2_control_block */ - u8 pm_timer_length; /* [V1] Byte Length of ports at pm_timer_block */ - u8 gpe0_block_length; /* [V1] Byte Length of ports at gpe0_block */ - u8 gpe1_block_length; /* [V1] Byte Length of ports at gpe1_block */ - u8 gpe1_base; /* [V1] Offset in GPE number space where GPE1 events start */ - u8 cst_control; /* [V1] Support for the _CST object and C-States change notification */ - u16 c2_latency; /* [V1] Worst case HW latency to enter/exit C2 state */ - u16 c3_latency; /* [V1] Worst case HW latency to enter/exit C3 state */ - u16 flush_size; /* [V1] Processor memory cache line width, in bytes */ - u16 flush_stride; /* [V1] Number of flush strides that need to be read */ - u8 duty_offset; /* [V1] Processor duty cycle index in processor P_CNT reg */ - u8 duty_width; /* [V1] Processor duty cycle value bit width in P_CNT register */ - u8 day_alarm; /* [V1] Index to day-of-month alarm in RTC CMOS RAM */ - u8 month_alarm; /* [V1] Index to month-of-year alarm in RTC CMOS RAM */ - u8 century; /* [V1] Index to century in RTC CMOS RAM */ - u16 boot_flags; /* [V3] IA-PC Boot Architecture Flags (see below for individual flags) */ - u8 reserved; /* [V1] Reserved, must be zero */ - u32 flags; /* [V1] Miscellaneous flag bits (see below for individual flags) */ - /* End of Version 1 FADT fields (ACPI 1.0) */ - - struct acpi_generic_address reset_register; /* [V3] 64-bit address of the Reset register */ - u8 reset_value; /* [V3] Value to write to the reset_register port to reset the system */ - u16 arm_boot_flags; /* [V5] ARM-Specific Boot Flags (see below for individual flags) (ACPI 5.1) */ - u8 minor_revision; /* [V5] FADT Minor Revision (ACPI 5.1) */ - u64 Xfacs; /* [V3] 64-bit physical address of FACS */ - u64 Xdsdt; /* [V3] 64-bit physical address of DSDT */ - struct acpi_generic_address xpm1a_event_block; /* [V3] 64-bit Extended Power Mgt 1a Event Reg Blk address */ - struct acpi_generic_address xpm1b_event_block; /* [V3] 64-bit Extended Power Mgt 1b Event Reg Blk address */ - struct acpi_generic_address xpm1a_control_block; /* [V3] 64-bit Extended Power Mgt 1a Control Reg Blk address */ - struct acpi_generic_address xpm1b_control_block; /* [V3] 64-bit Extended Power Mgt 1b Control Reg Blk address */ - struct acpi_generic_address xpm2_control_block; /* [V3] 64-bit Extended Power Mgt 2 Control Reg Blk address */ - struct acpi_generic_address xpm_timer_block; /* [V3] 64-bit Extended Power Mgt Timer Ctrl Reg Blk address */ - struct acpi_generic_address xgpe0_block; /* [V3] 64-bit Extended General Purpose Event 0 Reg Blk address */ - struct acpi_generic_address xgpe1_block; /* [V3] 64-bit Extended General Purpose Event 1 Reg Blk address */ - /* End of Version 3 FADT fields (ACPI 2.0) */ - - struct acpi_generic_address sleep_control; /* [V4] 64-bit Sleep Control register (ACPI 5.0) */ - /* End of Version 4 FADT fields (ACPI 3.0 and ACPI 4.0) (Field was originally reserved in ACPI 3.0) */ - - struct acpi_generic_address sleep_status; /* [V5] 64-bit Sleep Status register (ACPI 5.0) */ - /* End of Version 5 FADT fields (ACPI 5.0) */ - - u64 hypervisor_id; /* [V6] Hypervisor Vendor ID (ACPI 6.0) */ - /* End of Version 6 FADT fields (ACPI 6.0) */ - + struct acpi_table_header header; /* Common ACPI table header */ + u32 facs; /* 32-bit physical address of FACS */ + u32 dsdt; /* 32-bit physical address of DSDT */ + u8 model; /* System Interrupt Model (ACPI 1.0) - not used in ACPI 2.0+ */ + u8 preferred_profile; /* Conveys preferred power management profile to OSPM. */ + u16 sci_interrupt; /* System vector of SCI interrupt */ + u32 smi_command; /* 32-bit Port address of SMI command port */ + u8 acpi_enable; /* Value to write to SMI_CMD to enable ACPI */ + u8 acpi_disable; /* Value to write to SMI_CMD to disable ACPI */ + u8 s4_bios_request; /* Value to write to SMI_CMD to enter S4BIOS state */ + u8 pstate_control; /* Processor performance state control */ + u32 pm1a_event_block; /* 32-bit port address of Power Mgt 1a Event Reg Blk */ + u32 pm1b_event_block; /* 32-bit port address of Power Mgt 1b Event Reg Blk */ + u32 pm1a_control_block; /* 32-bit port address of Power Mgt 1a Control Reg Blk */ + u32 pm1b_control_block; /* 32-bit port address of Power Mgt 1b Control Reg Blk */ + u32 pm2_control_block; /* 32-bit port address of Power Mgt 2 Control Reg Blk */ + u32 pm_timer_block; /* 32-bit port address of Power Mgt Timer Ctrl Reg Blk */ + u32 gpe0_block; /* 32-bit port address of General Purpose Event 0 Reg Blk */ + u32 gpe1_block; /* 32-bit port address of General Purpose Event 1 Reg Blk */ + u8 pm1_event_length; /* Byte Length of ports at pm1x_event_block */ + u8 pm1_control_length; /* Byte Length of ports at pm1x_control_block */ + u8 pm2_control_length; /* Byte Length of ports at pm2_control_block */ + u8 pm_timer_length; /* Byte Length of ports at pm_timer_block */ + u8 gpe0_block_length; /* Byte Length of ports at gpe0_block */ + u8 gpe1_block_length; /* Byte Length of ports at gpe1_block */ + u8 gpe1_base; /* Offset in GPE number space where GPE1 events start */ + u8 cst_control; /* Support for the _CST object and C-States change notification */ + u16 c2_latency; /* Worst case HW latency to enter/exit C2 state */ + u16 c3_latency; /* Worst case HW latency to enter/exit C3 state */ + u16 flush_size; /* Processor memory cache line width, in bytes */ + u16 flush_stride; /* Number of flush strides that need to be read */ + u8 duty_offset; /* Processor duty cycle index in processor P_CNT reg */ + u8 duty_width; /* Processor duty cycle value bit width in P_CNT register */ + u8 day_alarm; /* Index to day-of-month alarm in RTC CMOS RAM */ + u8 month_alarm; /* Index to month-of-year alarm in RTC CMOS RAM */ + u8 century; /* Index to century in RTC CMOS RAM */ + u16 boot_flags; /* IA-PC Boot Architecture Flags (see below for individual flags) */ + u8 reserved; /* Reserved, must be zero */ + u32 flags; /* Miscellaneous flag bits (see below for individual flags) */ + struct acpi_generic_address reset_register; /* 64-bit address of the Reset register */ + u8 reset_value; /* Value to write to the reset_register port to reset the system */ + u16 arm_boot_flags; /* ARM-Specific Boot Flags (see below for individual flags) (ACPI 5.1) */ + u8 minor_revision; /* FADT Minor Revision (ACPI 5.1) */ + u64 Xfacs; /* 64-bit physical address of FACS */ + u64 Xdsdt; /* 64-bit physical address of DSDT */ + struct acpi_generic_address xpm1a_event_block; /* 64-bit Extended Power Mgt 1a Event Reg Blk address */ + struct acpi_generic_address xpm1b_event_block; /* 64-bit Extended Power Mgt 1b Event Reg Blk address */ + struct acpi_generic_address xpm1a_control_block; /* 64-bit Extended Power Mgt 1a Control Reg Blk address */ + struct acpi_generic_address xpm1b_control_block; /* 64-bit Extended Power Mgt 1b Control Reg Blk address */ + struct acpi_generic_address xpm2_control_block; /* 64-bit Extended Power Mgt 2 Control Reg Blk address */ + struct acpi_generic_address xpm_timer_block; /* 64-bit Extended Power Mgt Timer Ctrl Reg Blk address */ + struct acpi_generic_address xgpe0_block; /* 64-bit Extended General Purpose Event 0 Reg Blk address */ + struct acpi_generic_address xgpe1_block; /* 64-bit Extended General Purpose Event 1 Reg Blk address */ + struct acpi_generic_address sleep_control; /* 64-bit Sleep Control register (ACPI 5.0) */ + struct acpi_generic_address sleep_status; /* 64-bit Sleep Status register (ACPI 5.0) */ + u64 hypervisor_id; /* Hypervisor Vendor ID (ACPI 6.0) */ }; /* Masks for FADT IA-PC Boot Architecture Flags (boot_flags) [Vx]=Introduced in this FADT revision */ @@ -311,8 +301,8 @@ struct acpi_table_fadt { /* Masks for FADT ARM Boot Architecture Flags (arm_boot_flags) ACPI 5.1 */ -#define ACPI_FADT_PSCI_COMPLIANT (1) /* 00: [V5] PSCI 0.2+ is implemented */ -#define ACPI_FADT_PSCI_USE_HVC (1<<1) /* 01: [V5] HVC must be used instead of SMC as the PSCI conduit */ +#define ACPI_FADT_PSCI_COMPLIANT (1) /* 00: [V5+] PSCI 0.2+ is implemented */ +#define ACPI_FADT_PSCI_USE_HVC (1<<1) /* 01: [V5+] HVC must be used instead of SMC as the PSCI conduit */ /* Masks for FADT flags */ @@ -409,34 +399,20 @@ struct acpi_table_desc { * match the expected length. In other words, the length of the * FADT is the bottom line as to what the version really is. * - * NOTE: There is no officialy released V2 of the FADT. This - * version was used only for prototyping and testing during the - * 32-bit to 64-bit transition. V3 was the first official 64-bit - * version of the FADT. - * - * Update this list of defines when a new version of the FADT is - * added to the ACPI specification. Note that the FADT version is - * only incremented when new fields are appended to the existing - * version. Therefore, the FADT version is competely independent - * from the version of the ACPI specification where it is - * defined. - * - * For reference, the various FADT lengths are as follows: - * FADT V1 size: 0x074 ACPI 1.0 - * FADT V3 size: 0x0F4 ACPI 2.0 - * FADT V4 size: 0x100 ACPI 3.0 and ACPI 4.0 - * FADT V5 size: 0x10C ACPI 5.0 - * FADT V6 size: 0x114 ACPI 6.0 + * For reference, the values below are as follows: + * FADT V1 size: 0x074 + * FADT V2 size: 0x084 + * FADT V3 size: 0x0F4 + * FADT V4 size: 0x0F4 + * FADT V5 size: 0x10C + * FADT V6 size: 0x114 */ -#define ACPI_FADT_V1_SIZE (u32) (ACPI_FADT_OFFSET (flags) + 4) /* ACPI 1.0 */ -#define ACPI_FADT_V3_SIZE (u32) (ACPI_FADT_OFFSET (sleep_control)) /* ACPI 2.0 */ -#define ACPI_FADT_V4_SIZE (u32) (ACPI_FADT_OFFSET (sleep_status)) /* ACPI 3.0 and ACPI 4.0 */ -#define ACPI_FADT_V5_SIZE (u32) (ACPI_FADT_OFFSET (hypervisor_id)) /* ACPI 5.0 */ -#define ACPI_FADT_V6_SIZE (u32) (sizeof (struct acpi_table_fadt)) /* ACPI 6.0 */ +#define ACPI_FADT_V1_SIZE (u32) (ACPI_FADT_OFFSET (flags) + 4) +#define ACPI_FADT_V2_SIZE (u32) (ACPI_FADT_OFFSET (minor_revision) + 1) +#define ACPI_FADT_V3_SIZE (u32) (ACPI_FADT_OFFSET (sleep_control)) +#define ACPI_FADT_V5_SIZE (u32) (ACPI_FADT_OFFSET (hypervisor_id)) +#define ACPI_FADT_V6_SIZE (u32) (sizeof (struct acpi_table_fadt)) -/* Update these when new FADT versions are added */ - -#define ACPI_FADT_MAX_VERSION 6 #define ACPI_FADT_CONFORMANCE "ACPI 6.1 (FADT version 6)" #endif /* __ACTBL_H__ */ From 709fb1f961ea5c287107c3f903e81c9529224c8b Mon Sep 17 00:00:00 2001 From: Max Filippov Date: Mon, 14 Nov 2016 12:31:49 -0800 Subject: [PATCH 613/792] xtensa: wire up new pkey_{mprotect,alloc,free} syscalls Signed-off-by: Max Filippov --- arch/xtensa/include/uapi/asm/unistd.h | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/xtensa/include/uapi/asm/unistd.h b/arch/xtensa/include/uapi/asm/unistd.h index de9b14b2d348..cd400af4a6b2 100644 --- a/arch/xtensa/include/uapi/asm/unistd.h +++ b/arch/xtensa/include/uapi/asm/unistd.h @@ -767,7 +767,14 @@ __SYSCALL(346, sys_preadv2, 6) #define __NR_pwritev2 347 __SYSCALL(347, sys_pwritev2, 6) -#define __NR_syscall_count 348 +#define __NR_pkey_mprotect 348 +__SYSCALL(348, sys_pkey_mprotect, 4) +#define __NR_pkey_alloc 349 +__SYSCALL(349, sys_pkey_alloc, 2) +#define __NR_pkey_free 350 +__SYSCALL(350, sys_pkey_free, 1) + +#define __NR_syscall_count 351 /* * sysxtensa syscall handler From 1bc2f5fac34535aeb3878ce32a762a221be7a851 Mon Sep 17 00:00:00 2001 From: "H. Nikolaus Schaller" Date: Mon, 14 Nov 2016 12:55:15 +0100 Subject: [PATCH 614/792] ARM: dts: omap5: board-common: fix wrong SMPS6 (VDD-DDR3) voltage DDR3L is usually specified as JEDEC standard 1.35V(1.28V~1.45V) & 1.5V(1.425V~1.575V) Therefore setting smps6 regulator to 1.2V is definitively below minimum. It appears that real world chips are more forgiving than data sheets indicate, but let's set the regulator right. Note: a board that uses other voltages (DDR with 1.5V) can overwrite by referencing &smps6_reg. Signed-off-by: H. Nikolaus Schaller Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap5-board-common.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index 60a33c4b7b82..4caadb253249 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -476,8 +476,8 @@ smps6_reg: smps6 { /* VDD_DDR3 - over VDD_SMPS6 */ regulator-name = "smps6"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; regulator-always-on; regulator-boot-on; }; From 6ff1a25318ebf688ef9593fe09cd449f6fb4ad31 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 14 Nov 2016 21:46:47 +0100 Subject: [PATCH 615/792] ALSA: usb-audio: Fix use-after-free of usb_device at disconnect The usb-audio driver implements the deferred device disconnection for the device in use. In this mode, the disconnection callback returns immediately while the actual ALSA card object removal happens later when all files get closed. As Shuah reported, this code flow, however, leads to a use-after-free, detected by KASAN: BUG: KASAN: use-after-free in snd_usb_audio_free+0x134/0x160 [snd_usb_audio] at addr ffff8801c863ce10 Write of size 8 by task pulseaudio/2244 Call Trace: [] dump_stack+0x67/0x94 [] kasan_object_err+0x21/0x70 [] kasan_report_error+0x1fa/0x4e0 [] ? kasan_slab_free+0x87/0xb0 [] __asan_report_store8_noabort+0x43/0x50 [] ? snd_usb_audio_free+0x134/0x160 [snd_usb_audio] [] snd_usb_audio_free+0x134/0x160 [snd_usb_audio] [] snd_usb_audio_dev_free+0x31/0x40 [snd_usb_audio] [] __snd_device_free+0x12a/0x210 [] snd_device_free_all+0x85/0xd0 [] release_card_device+0x34/0x130 [] device_release+0x76/0x1e0 [] kobject_release+0x107/0x370 ..... Object at ffff8801c863cc80, in cache kmalloc-2048 size: 2048 Allocated: [] save_stack_trace+0x2b/0x50 [] save_stack+0x46/0xd0 [] kasan_kmalloc+0xad/0xe0 [] kmem_cache_alloc_trace+0xfa/0x240 [] usb_alloc_dev+0x57/0xc90 [] hub_event+0xf1d/0x35f0 .... Freed: [] save_stack_trace+0x2b/0x50 [] save_stack+0x46/0xd0 [] kasan_slab_free+0x71/0xb0 [] kfree+0xd9/0x280 [] usb_release_dev+0xde/0x110 [] device_release+0x76/0x1e0 .... It's the code trying to clear drvdata of the assigned usb_device where the usb_device itself was already released in usb_release_dev() after the disconnect callback. This patch fixes it by checking whether the code path is via the disconnect callback, i.e. chip->shutdown flag is set. Fixes: 79289e24194a ('ALSA: usb-audio: Refer to chip->usb_id for quirks...') Reported-and-tested-by: Shuah Khan Cc: # v4.6+ Signed-off-by: Takashi Iwai --- sound/usb/card.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/usb/card.c b/sound/usb/card.c index 9e5276d6dda0..2ddc034673a8 100644 --- a/sound/usb/card.c +++ b/sound/usb/card.c @@ -315,7 +315,8 @@ static int snd_usb_audio_free(struct snd_usb_audio *chip) snd_usb_endpoint_free(ep); mutex_destroy(&chip->mutex); - dev_set_drvdata(&chip->dev->dev, NULL); + if (!atomic_read(&chip->shutdown)) + dev_set_drvdata(&chip->dev->dev, NULL); kfree(chip); return 0; } From 6ca595a70bc46e1a0eea3ee0681360f41555bfd9 Mon Sep 17 00:00:00 2001 From: Hoan Tran Date: Mon, 14 Nov 2016 11:19:02 -0800 Subject: [PATCH 616/792] mailbox: PCC: Fix lockdep warning when request PCC channel This patch fixes the lockdep warning below DEBUG_LOCKS_WARN_ON(irqs_disabled_flags(flags)) ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1 at linux-next/kernel/locking/lockdep.c:2876 lockdep_trace_alloc+0xe0/0xf0 Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.8.0-11756-g86c5152 #46 ... Call trace: Exception stack(0xffff8007da837890 to 0xffff8007da8379c0) 7880: ffff8007da834000 0001000000000000 78a0: ffff8007da837a70 ffff0000081111a0 00000000600000c5 000000000000003d 78c0: 9374bc6a7f3c7832 0000000000381878 ffff000009db7ab8 000000000000002f 78e0: ffff00000811aabc ffff000008be2548 ffff8007da837990 ffff00000811adf8 7900: ffff8007da834000 00000000024080c0 00000000000000c0 ffff000009021000 7920: 0000000000000000 0000000000000000 ffff000008c8f7c8 ffff8007da579810 7940: 000000000000002f ffff8007da858000 0000000000000000 0000000000000001 7960: 0000000000000001 0000000000000000 ffff00000811a468 0000000000000002 7980: 656c62617369645f 0000000000038187 00000000000000ee ffff8007da837850 79a0: ffff000009db50c0 ffff000009db569d 0000000000000006 ffff000089db568f [] lockdep_trace_alloc+0xe0/0xf0 [] __kmalloc_track_caller+0x50/0x250 [] devres_alloc_node+0x28/0x60 [] devm_request_threaded_irq+0x50/0xe0 [] pcc_mbox_request_channel+0x110/0x170 [] acpi_cppc_processor_probe+0x264/0x414 [] __acpi_processor_start+0x28/0xa0 [] acpi_processor_start+0x44/0x54 [] driver_probe_device+0x1fc/0x2b0 [] __driver_attach+0xb4/0xc0 [] bus_for_each_dev+0x5c/0xa0 [] driver_attach+0x20/0x30 [] bus_add_driver+0x110/0x230 [] driver_register+0x60/0x100 [] acpi_processor_driver_init+0x2c/0xb0 [] do_one_initcall+0x38/0x130 [] kernel_init_freeable+0x210/0x2b4 [] kernel_init+0x10/0x110 [] ret_from_fork+0x10/0x50 It's because the spinlock inside pcc_mbox_request_channel() is kept too long. This patch releases spinlock before request_irq() and free_irq() to fix this issue as spinlock is only needed to protect the channel data. Signed-off-by: Hoan Tran Reviewed-by: Prashanth Prakash Signed-off-by: Rafael J. Wysocki --- drivers/mailbox/pcc.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/mailbox/pcc.c b/drivers/mailbox/pcc.c index 08c87fadca8c..1f32688c312d 100644 --- a/drivers/mailbox/pcc.c +++ b/drivers/mailbox/pcc.c @@ -65,6 +65,7 @@ #include #include #include +#include #include "mailbox.h" @@ -267,6 +268,8 @@ struct mbox_chan *pcc_mbox_request_channel(struct mbox_client *cl, if (chan->txdone_method == TXDONE_BY_POLL && cl->knows_txdone) chan->txdone_method |= TXDONE_BY_ACK; + spin_unlock_irqrestore(&chan->lock, flags); + if (pcc_doorbell_irq[subspace_id] > 0) { int rc; @@ -275,12 +278,11 @@ struct mbox_chan *pcc_mbox_request_channel(struct mbox_client *cl, if (unlikely(rc)) { dev_err(dev, "failed to register PCC interrupt %d\n", pcc_doorbell_irq[subspace_id]); + pcc_mbox_free_channel(chan); chan = ERR_PTR(rc); } } - spin_unlock_irqrestore(&chan->lock, flags); - return chan; } EXPORT_SYMBOL_GPL(pcc_mbox_request_channel); @@ -304,20 +306,19 @@ void pcc_mbox_free_channel(struct mbox_chan *chan) return; } + if (pcc_doorbell_irq[id] > 0) + devm_free_irq(chan->mbox->dev, pcc_doorbell_irq[id], chan); + spin_lock_irqsave(&chan->lock, flags); chan->cl = NULL; chan->active_req = NULL; if (chan->txdone_method == (TXDONE_BY_POLL | TXDONE_BY_ACK)) chan->txdone_method = TXDONE_BY_POLL; - if (pcc_doorbell_irq[id] > 0) - devm_free_irq(chan->mbox->dev, pcc_doorbell_irq[id], chan); - spin_unlock_irqrestore(&chan->lock, flags); } EXPORT_SYMBOL_GPL(pcc_mbox_free_channel); - /** * pcc_send_data - Called from Mailbox Controller code. Used * here only to ring the channel doorbell. The PCC client From 5d0d4b91bf627f14f95167b738d524156c9d440b Mon Sep 17 00:00:00 2001 From: Baoquan He Date: Sun, 13 Nov 2016 13:01:32 +0800 Subject: [PATCH 617/792] Revert "bnx2: Reset device during driver initialization" This reverts commit 3e1be7ad2d38c6bd6aeef96df9bd0a7822f4e51c. When people build bnx2 driver into kernel, it will fail to detect and load firmware because firmware is contained in initramfs and initramfs has not been uncompressed yet during do_initcalls. So revert commit 3e1be7a and work out a new way in the later patch. Signed-off-by: Baoquan He Acked-by: Paul Menzel Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c index b3791b394715..c55797291b57 100644 --- a/drivers/net/ethernet/broadcom/bnx2.c +++ b/drivers/net/ethernet/broadcom/bnx2.c @@ -6361,6 +6361,10 @@ bnx2_open(struct net_device *dev) struct bnx2 *bp = netdev_priv(dev); int rc; + rc = bnx2_request_firmware(bp); + if (rc < 0) + goto out; + netif_carrier_off(dev); bnx2_disable_int(bp); @@ -6429,6 +6433,7 @@ open_err: bnx2_free_irq(bp); bnx2_free_mem(bp); bnx2_del_napi(bp); + bnx2_release_firmware(bp); goto out; } @@ -8575,12 +8580,6 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) pci_set_drvdata(pdev, dev); - rc = bnx2_request_firmware(bp); - if (rc < 0) - goto error; - - - bnx2_reset_chip(bp, BNX2_DRV_MSG_CODE_RESET); memcpy(dev->dev_addr, bp->mac_addr, ETH_ALEN); dev->hw_features = NETIF_F_IP_CSUM | NETIF_F_SG | @@ -8613,7 +8612,6 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) return 0; error: - bnx2_release_firmware(bp); pci_iounmap(pdev, bp->regview); pci_release_regions(pdev); pci_disable_device(pdev); From 6df77862f63f389df3b1ad879738e04440d7385d Mon Sep 17 00:00:00 2001 From: Baoquan He Date: Sun, 13 Nov 2016 13:01:33 +0800 Subject: [PATCH 618/792] bnx2: Wait for in-flight DMA to complete at probe stage In-flight DMA from 1st kernel could continue going in kdump kernel. New io-page table has been created before bnx2 does reset at open stage. We have to wait for the in-flight DMA to complete to avoid it look up into the newly created io-page table at probe stage. Suggested-by: Michael Chan Signed-off-by: Baoquan He Acked-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnx2.c | 38 +++++++++++++++++++++++----- 1 file changed, 32 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c index c55797291b57..1f7034d739b0 100644 --- a/drivers/net/ethernet/broadcom/bnx2.c +++ b/drivers/net/ethernet/broadcom/bnx2.c @@ -49,6 +49,7 @@ #include #include #include +#include #if IS_ENABLED(CONFIG_CNIC) #define BCM_CNIC 1 @@ -4764,15 +4765,16 @@ bnx2_setup_msix_tbl(struct bnx2 *bp) BNX2_WR(bp, BNX2_PCI_GRC_WINDOW3_ADDR, BNX2_MSIX_PBA_ADDR); } -static int -bnx2_reset_chip(struct bnx2 *bp, u32 reset_code) +static void +bnx2_wait_dma_complete(struct bnx2 *bp) { u32 val; - int i, rc = 0; - u8 old_port; + int i; - /* Wait for the current PCI transaction to complete before - * issuing a reset. */ + /* + * Wait for the current PCI transaction to complete before + * issuing a reset. + */ if ((BNX2_CHIP(bp) == BNX2_CHIP_5706) || (BNX2_CHIP(bp) == BNX2_CHIP_5708)) { BNX2_WR(bp, BNX2_MISC_ENABLE_CLR_BITS, @@ -4796,6 +4798,21 @@ bnx2_reset_chip(struct bnx2 *bp, u32 reset_code) } } + return; +} + + +static int +bnx2_reset_chip(struct bnx2 *bp, u32 reset_code) +{ + u32 val; + int i, rc = 0; + u8 old_port; + + /* Wait for the current PCI transaction to complete before + * issuing a reset. */ + bnx2_wait_dma_complete(bp); + /* Wait for the firmware to tell us it is ok to issue a reset. */ bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT0 | reset_code, 1, 1); @@ -8580,6 +8597,15 @@ bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) pci_set_drvdata(pdev, dev); + /* + * In-flight DMA from 1st kernel could continue going in kdump kernel. + * New io-page table has been created before bnx2 does reset at open stage. + * We have to wait for the in-flight DMA to complete to avoid it look up + * into the newly created io-page table. + */ + if (is_kdump_kernel()) + bnx2_wait_dma_complete(bp); + memcpy(dev->dev_addr, bp->mac_addr, ETH_ALEN); dev->hw_features = NETIF_F_IP_CSUM | NETIF_F_SG | From 5bf35ddfee052d44f39ebaa395d87101c8918405 Mon Sep 17 00:00:00 2001 From: Xin Long Date: Sun, 13 Nov 2016 21:44:37 +0800 Subject: [PATCH 619/792] sctp: change sk state only when it has assocs in sctp_shutdown Now when users shutdown a sock with SEND_SHUTDOWN in sctp, even if this sock has no connection (assoc), sk state would be changed to SCTP_SS_CLOSING, which is not as we expect. Besides, after that if users try to listen on this sock, kernel could even panic when it dereference sctp_sk(sk)->bind_hash in sctp_inet_listen, as bind_hash is null when sock has no assoc. This patch is to move sk state change after checking sk assocs is not empty, and also merge these two if() conditions and reduce indent level. Fixes: d46e416c11c8 ("sctp: sctp should change socket state when shutdown is received") Reported-by: Andrey Konovalov Tested-by: Andrey Konovalov Signed-off-by: Xin Long Acked-by: Marcelo Ricardo Leitner Acked-by: Neil Horman Signed-off-by: David S. Miller --- net/sctp/socket.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/net/sctp/socket.c b/net/sctp/socket.c index faa48ff5cf4b..f23ad913dc7a 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -4285,19 +4285,18 @@ static void sctp_shutdown(struct sock *sk, int how) { struct net *net = sock_net(sk); struct sctp_endpoint *ep; - struct sctp_association *asoc; if (!sctp_style(sk, TCP)) return; - if (how & SEND_SHUTDOWN) { + ep = sctp_sk(sk)->ep; + if (how & SEND_SHUTDOWN && !list_empty(&ep->asocs)) { + struct sctp_association *asoc; + sk->sk_state = SCTP_SS_CLOSING; - ep = sctp_sk(sk)->ep; - if (!list_empty(&ep->asocs)) { - asoc = list_entry(ep->asocs.next, - struct sctp_association, asocs); - sctp_primitive_SHUTDOWN(net, asoc, NULL); - } + asoc = list_entry(ep->asocs.next, + struct sctp_association, asocs); + sctp_primitive_SHUTDOWN(net, asoc, NULL); } } From 977c1f9c8c022d0173181766b34a0db3705265a4 Mon Sep 17 00:00:00 2001 From: Alexei Starovoitov Date: Mon, 7 Nov 2016 15:14:20 -0800 Subject: [PATCH 620/792] ftrace: Ignore FTRACE_FL_DISABLED while walking dyn_ftrace records ftrace_shutdown() checks for sanity of ftrace records and if dyn_ftrace->flags is not zero, it will warn. It can happen that 'flags' are set to FTRACE_FL_DISABLED at this point, since some module was loaded, but before ftrace_module_enable() cleared the flags for this module. In other words the module.c is doing: ftrace_module_init(mod); // calls ftrace_update_code() that sets flags=FTRACE_FL_DISABLED ... // here ftrace_shutdown() is called that warns, since err = prepare_coming_module(mod); // didn't have a chance to clear FTRACE_FL_DISABLED Fix it by ignoring disabled records. It's similar to what __ftrace_hash_rec_update() is already doing. Link: http://lkml.kernel.org/r/1478560460-3818619-1-git-send-email-ast@fb.com Cc: stable@vger.kernel.org Fixes: b7ffffbb46f2 "ftrace: Add infrastructure for delayed enabling of module functions" Signed-off-by: Alexei Starovoitov Signed-off-by: Steven Rostedt --- kernel/trace/ftrace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 2050a7652a86..326498baab83 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -2763,7 +2763,7 @@ static int ftrace_shutdown(struct ftrace_ops *ops, int command) struct dyn_ftrace *rec; do_for_each_ftrace_rec(pg, rec) { - if (FTRACE_WARN_ON_ONCE(rec->flags)) + if (FTRACE_WARN_ON_ONCE(rec->flags & ~FTRACE_FL_DISABLED)) pr_warn(" %pS flags:%lx\n", (void *)rec->ip, rec->flags); } while_for_each_ftrace_rec(); From 546fece4eae871f033925ccf0ff2b740725ae915 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Red Hat)" Date: Mon, 14 Nov 2016 16:31:49 -0500 Subject: [PATCH 621/792] ftrace: Add more checks for FTRACE_FL_DISABLED in processing ip records When a module is first loaded and its function ip records are added to the ftrace list of functions to modify, they are set to DISABLED, as their text is still in a read only state. When the module is fully loaded, and can be updated, the flag is cleared, and if their's any functions that should be tracing them, it is updated at that moment. But there's several locations that do record accounting and should ignore records that are marked as disabled, or they can cause issues. Alexei already fixed one location, but others need to be addressed. Cc: stable@vger.kernel.org Fixes: b7ffffbb46f2 "ftrace: Add infrastructure for delayed enabling of module functions" Reported-by: Alexei Starovoitov Signed-off-by: Steven Rostedt --- kernel/trace/ftrace.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c index 326498baab83..da87b3cba5b3 100644 --- a/kernel/trace/ftrace.c +++ b/kernel/trace/ftrace.c @@ -1862,6 +1862,10 @@ static int __ftrace_hash_update_ipmodify(struct ftrace_ops *ops, /* Update rec->flags */ do_for_each_ftrace_rec(pg, rec) { + + if (rec->flags & FTRACE_FL_DISABLED) + continue; + /* We need to update only differences of filter_hash */ in_old = !!ftrace_lookup_ip(old_hash, rec->ip); in_new = !!ftrace_lookup_ip(new_hash, rec->ip); @@ -1884,6 +1888,10 @@ rollback: /* Roll back what we did above */ do_for_each_ftrace_rec(pg, rec) { + + if (rec->flags & FTRACE_FL_DISABLED) + continue; + if (rec == end) goto err_out; @@ -2397,6 +2405,10 @@ void __weak ftrace_replace_code(int enable) return; do_for_each_ftrace_rec(pg, rec) { + + if (rec->flags & FTRACE_FL_DISABLED) + continue; + failed = __ftrace_replace_code(rec, enable); if (failed) { ftrace_bug(failed, rec); @@ -3598,6 +3610,10 @@ match_records(struct ftrace_hash *hash, char *func, int len, char *mod) goto out_unlock; do_for_each_ftrace_rec(pg, rec) { + + if (rec->flags & FTRACE_FL_DISABLED) + continue; + if (ftrace_match_record(rec, &func_g, mod_match, exclude_mod)) { ret = enter_record(hash, rec, clear_filter); if (ret < 0) { @@ -3793,6 +3809,9 @@ register_ftrace_function_probe(char *glob, struct ftrace_probe_ops *ops, do_for_each_ftrace_rec(pg, rec) { + if (rec->flags & FTRACE_FL_DISABLED) + continue; + if (!ftrace_match_record(rec, &func_g, NULL, 0)) continue; @@ -4685,6 +4704,9 @@ ftrace_set_func(unsigned long *array, int *idx, int size, char *buffer) do_for_each_ftrace_rec(pg, rec) { + if (rec->flags & FTRACE_FL_DISABLED) + continue; + if (ftrace_match_record(rec, &func_g, NULL, 0)) { /* if it is in the array */ exists = false; From c51e424dc79e1428afc4d697cdb6a07f7af70cbf Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Sun, 13 Nov 2016 17:50:35 -0800 Subject: [PATCH 622/792] net: stmmac: Fix lack of link transition for fixed PHYs Commit 52f95bbfcf72 ("stmmac: fix adjust link call in case of a switch is attached") added some logic to avoid polling the fixed PHY and therefore invoking the adjust_link callback more than once, since this is a fixed PHY and link events won't be generated. This works fine the first time, because we start with phydev->irq = PHY_POLL, so we call adjust_link, then we set phydev->irq = PHY_IGNORE_INTERRUPT and we stop polling the PHY. Now, if we called ndo_close(), which calls both phy_stop() and does an explicit netif_carrier_off(), we end up with a link down. Upon calling ndo_open() again, despite starting the PHY state machine, we have PHY_IGNORE_INTERRUPT set, and we generate no link event at all, so the link is permanently down. Fixes: 52f95bbfcf72 ("stmmac: fix adjust link call in case of a switch is attached") Signed-off-by: Florian Fainelli Acked-by: Giuseppe Cavallaro Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 48e71fad4210..e2c94ec4edd0 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -880,6 +880,13 @@ static int stmmac_init_phy(struct net_device *dev) return -ENODEV; } + /* stmmac_adjust_link will change this to PHY_IGNORE_INTERRUPT to avoid + * subsequent PHY polling, make sure we force a link transition if + * we have a UP/DOWN/UP transition + */ + if (phydev->is_pseudo_fixed_link) + phydev->irq = PHY_POLL; + pr_debug("stmmac_init_phy: %s: attached to PHY (UID 0x%x)" " Link = %d\n", dev->name, phydev->phy_id, phydev->link); From ac571de999e14b87890cb960ad6f03fbdde6abc8 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Mon, 14 Nov 2016 11:26:32 +0100 Subject: [PATCH 623/792] mlxsw: spectrum_router: Flush FIB tables during fini Since commit b45f64d16d45 ("mlxsw: spectrum_router: Use FIB notifications instead of switchdev calls") we reflect to the device the entire FIB table and not only FIBs that point to netdevs created by the driver. During module removal, FIBs of the second type are removed following NETDEV_UNREGISTER events sent. The other FIBs are still present in both the driver's cache and the device's table. Fix this by iterating over all the FIB tables in the device and flush them. There's no need to take locks, as we're the only writer. Fixes: b45f64d16d45 ("mlxsw: spectrum_router: Use FIB notifications instead of switchdev calls") Signed-off-by: Ido Schimmel Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- .../net/ethernet/mellanox/mlxsw/spectrum_router.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c index cbeeddd70c5a..e83072da6272 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c @@ -594,8 +594,11 @@ static int mlxsw_sp_vrs_init(struct mlxsw_sp *mlxsw_sp) return 0; } +static void mlxsw_sp_router_fib_flush(struct mlxsw_sp *mlxsw_sp); + static void mlxsw_sp_vrs_fini(struct mlxsw_sp *mlxsw_sp) { + mlxsw_sp_router_fib_flush(mlxsw_sp); kfree(mlxsw_sp->router.vrs); } @@ -1867,18 +1870,18 @@ static int mlxsw_sp_router_set_abort_trap(struct mlxsw_sp *mlxsw_sp) return mlxsw_reg_write(mlxsw_sp->core, MLXSW_REG(ralue), ralue_pl); } -static void mlxsw_sp_router_fib4_abort(struct mlxsw_sp *mlxsw_sp) +static void mlxsw_sp_router_fib_flush(struct mlxsw_sp *mlxsw_sp) { struct mlxsw_resources *resources; struct mlxsw_sp_fib_entry *fib_entry; struct mlxsw_sp_fib_entry *tmp; struct mlxsw_sp_vr *vr; int i; - int err; resources = mlxsw_core_resources_get(mlxsw_sp->core); for (i = 0; i < resources->max_virtual_routers; i++) { vr = &mlxsw_sp->router.vrs[i]; + if (!vr->used) continue; @@ -1894,6 +1897,13 @@ static void mlxsw_sp_router_fib4_abort(struct mlxsw_sp *mlxsw_sp) break; } } +} + +static void mlxsw_sp_router_fib4_abort(struct mlxsw_sp *mlxsw_sp) +{ + int err; + + mlxsw_sp_router_fib_flush(mlxsw_sp); mlxsw_sp->router.aborted = true; err = mlxsw_sp_router_set_abort_trap(mlxsw_sp); if (err) From e123386bc31bbf467dc558f2f919de0b8b4ba58c Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Mon, 7 Nov 2016 14:32:02 -0500 Subject: [PATCH 624/792] tile: handle __ro_after_init like parisc does The tile architecture already marks RO_DATA as read-only in the kernel, so grouping RO_AFTER_INIT_DATA with RO_DATA, as is done by default, means the kernel faults in init when it tries to write to RO_AFTER_INIT_DATA. For now, just arrange that __ro_after_init is handled like __write_once, i.e. __read_mostly. Reviewed-by: Kees Cook Signed-off-by: Chris Metcalf --- arch/tile/include/asm/cache.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/tile/include/asm/cache.h b/arch/tile/include/asm/cache.h index 6160761d5f61..4810e48dbbbf 100644 --- a/arch/tile/include/asm/cache.h +++ b/arch/tile/include/asm/cache.h @@ -61,4 +61,7 @@ */ #define __write_once __read_mostly +/* __ro_after_init is the generic name for the tile arch __write_once. */ +#define __ro_after_init __read_mostly + #endif /* _ASM_TILE_CACHE_H */ From c733ab3512431436a26e0381829b45794cb13fb0 Mon Sep 17 00:00:00 2001 From: Mauricio Faria de Oliveira Date: Mon, 14 Nov 2016 19:26:22 -0200 Subject: [PATCH 625/792] scsi: qla2xxx: do not abort all commands in the adapter during EEH recovery The previous commit 1535aa75a3d8 ("qla2xxx: fix invalid DMA access after command aborts in PCI device remove") introduced a regression during an EEH recovery, since the change to the qla2x00_abort_all_cmds() function calls qla2xxx_eh_abort(), which verifies the EEH recovery condition but handles it heavy-handed. (commit a465537ad1a4 "qla2xxx: Disable the adapter and skip error recovery in case of register disconnect.") This problem warrants a more general/optimistic solution right into qla2xxx_eh_abort() (eg in case a real command abort arrives during EEH recovery, or if it takes long enough to trigger command aborts); but it's still worth to add a check to ensure the code added by the previous commit is correct and contained within its owner function. This commit just adds a 'if (!ha->flags.eeh_busy)' check around it. (ahem; a trivial fix for this -rc series; sorry for this oversight.) With it applied, both PCI device remove and EEH recovery works fine. Fixes: 1535aa75a3d8 ("scsi: qla2xxx: fix invalid DMA access after command aborts in PCI device remove") Signed-off-by: Mauricio Faria de Oliveira Acked-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_os.c | 21 +++++++++++++-------- 1 file changed, 13 insertions(+), 8 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 567fa080e261..56d6142852a5 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -1456,15 +1456,20 @@ qla2x00_abort_all_cmds(scsi_qla_host_t *vha, int res) for (cnt = 1; cnt < req->num_outstanding_cmds; cnt++) { sp = req->outstanding_cmds[cnt]; if (sp) { - /* Get a reference to the sp and drop the lock. - * The reference ensures this sp->done() call - * - and not the call in qla2xxx_eh_abort() - - * ends the SCSI command (with result 'res'). + /* Don't abort commands in adapter during EEH + * recovery as it's not accessible/responding. */ - sp_get(sp); - spin_unlock_irqrestore(&ha->hardware_lock, flags); - qla2xxx_eh_abort(GET_CMD_SP(sp)); - spin_lock_irqsave(&ha->hardware_lock, flags); + if (!ha->flags.eeh_busy) { + /* Get a reference to the sp and drop the lock. + * The reference ensures this sp->done() call + * - and not the call in qla2xxx_eh_abort() - + * ends the SCSI command (with result 'res'). + */ + sp_get(sp); + spin_unlock_irqrestore(&ha->hardware_lock, flags); + qla2xxx_eh_abort(GET_CMD_SP(sp)); + spin_lock_irqsave(&ha->hardware_lock, flags); + } req->outstanding_cmds[cnt] = NULL; sp->done(vha, sp, res); } From 60f8339eb388df8a46f8eb4282ff0e15f08f218c Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sat, 12 Nov 2016 15:01:09 +0100 Subject: [PATCH 626/792] gpio: do not double-check direction on sleeping chips When locking a GPIO line as IRQ, we go to lengths to double-check that the line is really set as input before marking it as used for IRQ. This is not good on GPIO chips that can sleep, because this function is called in IRQ-safe context. Just skip this if it can't be checked quickly. Currently this happens on sleeping expanders such as STMPE or TC3589x: BUG: scheduling while atomic: swapper/1/0x00000002 Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.9.0-rc1+ #38 Hardware name: Nomadik STn8815 [] (unwind_backtrace) from [] (show_stack+0x10/0x14) [] (show_stack) from [] (__schedule_bug+0x54/0x80) [] (__schedule_bug) from [] (__schedule+0x3a0/0x460) [] (__schedule) from [] (schedule+0x54/0xb8) (...) This patch fixes that problem and relies on the direction read from the chip when it was added. Cc: stable@vger.kernel.org Fixes: 9c10280d85c1 ("gpio: flush direction status in gpiochip_lock_as_irq()") Cc: Patrice Chotard Signed-off-by: Linus Walleij --- drivers/gpio/gpiolib.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 93ed0e00c578..868128a676ba 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -2737,8 +2737,11 @@ int gpiochip_lock_as_irq(struct gpio_chip *chip, unsigned int offset) if (IS_ERR(desc)) return PTR_ERR(desc); - /* Flush direction if something changed behind our back */ - if (chip->get_direction) { + /* + * If it's fast: flush the direction setting if something changed + * behind our back + */ + if (!chip->can_sleep && chip->get_direction) { int dir = chip->get_direction(chip, offset); if (dir) From 220a04f0e53276eb3da666174bcf97489fd8644e Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Mon, 14 Nov 2016 15:10:29 +0100 Subject: [PATCH 627/792] gpio: tc3589x: fix up .get_direction() The bit in the TC3589x direction register is 0 for input and 1 for output, but the gpiolib expects the reverse. Fix up the logic. Cc: stable@vger.kernel.org Fixes: 14063d71e5e6 ("gpio: tc3589x: add .get_direction() and small cleanup") Signed-off-by: Linus Walleij --- drivers/gpio/gpio-tc3589x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpio/gpio-tc3589x.c b/drivers/gpio/gpio-tc3589x.c index 5a5a6cb00eea..d6e21f1a70a9 100644 --- a/drivers/gpio/gpio-tc3589x.c +++ b/drivers/gpio/gpio-tc3589x.c @@ -97,7 +97,7 @@ static int tc3589x_gpio_get_direction(struct gpio_chip *chip, if (ret < 0) return ret; - return !!(ret & BIT(pos)); + return !(ret & BIT(pos)); } static int tc3589x_gpio_set_single_ended(struct gpio_chip *chip, From c0a36013639b06760f7c2c21a8387eac855432e1 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 15 Nov 2016 15:28:33 +1100 Subject: [PATCH 628/792] powerpc/64: Fix setting of AIL in hypervisor mode Commit d3cbff1b5 "powerpc: Put exception configuration in a common place" broke the setting of the AIL bit (which enables taking exceptions with the MMU still on) on all processors, moving it incorrectly to a function called only on the boot CPU. This was correct for the guest case but not when running in hypervisor mode. This fixes it by partially reverting that commit, putting the setting back in cpu_ready_for_interrupts() Fixes: d3cbff1b5a90 ("powerpc: Put exception configuration in a common place") Cc: stable@vger.kernel.org # v4.8+ Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Michael Ellerman --- arch/powerpc/kernel/setup_64.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 7ac8e6eaab5b..8d586cff8a41 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -226,17 +226,25 @@ static void __init configure_exceptions(void) if (firmware_has_feature(FW_FEATURE_OPAL)) opal_configure_cores(); - /* Enable AIL if supported, and we are in hypervisor mode */ - if (early_cpu_has_feature(CPU_FTR_HVMODE) && - early_cpu_has_feature(CPU_FTR_ARCH_207S)) { - unsigned long lpcr = mfspr(SPRN_LPCR); - mtspr(SPRN_LPCR, lpcr | LPCR_AIL_3); - } + /* AIL on native is done in cpu_ready_for_interrupts() */ } } static void cpu_ready_for_interrupts(void) { + /* + * Enable AIL if supported, and we are in hypervisor mode. This + * is called once for every processor. + * + * If we are not in hypervisor mode the job is done once for + * the whole partition in configure_exceptions(). + */ + if (early_cpu_has_feature(CPU_FTR_HVMODE) && + early_cpu_has_feature(CPU_FTR_ARCH_207S)) { + unsigned long lpcr = mfspr(SPRN_LPCR); + mtspr(SPRN_LPCR, lpcr | LPCR_AIL_3); + } + /* Set IR and DR in PACA MSR */ get_paca()->kernel_msr = MSR_KERNEL; } From 5bf7b6e86f29f064979d7b3e6dd21c5dd1feb855 Mon Sep 17 00:00:00 2001 From: Loic Pallardy Date: Tue, 15 Nov 2016 09:47:00 +0100 Subject: [PATCH 629/792] ARM: dts: STiH410-b2260: Fix typo in spi0 chipselect definition Change cs-gpio to cs-gpios. Signed-off-by: Loic Pallardy Acked-by: Patrice Chotard --- arch/arm/boot/dts/stih410-b2260.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/stih410-b2260.dts b/arch/arm/boot/dts/stih410-b2260.dts index ef2ff2f518f6..7fb507fcba7e 100644 --- a/arch/arm/boot/dts/stih410-b2260.dts +++ b/arch/arm/boot/dts/stih410-b2260.dts @@ -74,7 +74,7 @@ /* Low speed expansion connector */ spi0: spi@9844000 { label = "LS-SPI0"; - cs-gpio = <&pio30 3 0>; + cs-gpios = <&pio30 3 0>; status = "okay"; }; From 59c3b76cc61d1d676f965c192cc7969aa5cb2744 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Thu, 18 Aug 2016 09:10:44 +0200 Subject: [PATCH 630/792] fuse: fix fuse_write_end() if zero bytes were copied If pos is at the beginning of a page and copied is zero then page is not zeroed but is marked uptodate. Fix by skipping everything except unlock/put of page if zero bytes were copied. Reported-by: Al Viro Fixes: 6b12c1b37e55 ("fuse: Implement write_begin/write_end callbacks") Cc: # v3.15+ Signed-off-by: Miklos Szeredi --- fs/fuse/file.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/fs/fuse/file.c b/fs/fuse/file.c index abc66a6237fd..2401c5dabb2a 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -1985,6 +1985,10 @@ static int fuse_write_end(struct file *file, struct address_space *mapping, { struct inode *inode = page->mapping->host; + /* Haven't copied anything? Skip zeroing, size extending, dirtying. */ + if (!copied) + goto unlock; + if (!PageUptodate(page)) { /* Zero any unwritten bytes at the end of the page */ size_t endoff = (pos + copied) & ~PAGE_MASK; @@ -1995,6 +1999,8 @@ static int fuse_write_end(struct file *file, struct address_space *mapping, fuse_write_update_size(inode, pos + copied); set_page_dirty(page); + +unlock: unlock_page(page); put_page(page); From c8eaf3479e521e973eb2d4111b8ee8f5b7b564ab Mon Sep 17 00:00:00 2001 From: Filip Matusiak Date: Wed, 2 Nov 2016 10:04:26 +0100 Subject: [PATCH 631/792] mac80211: Ignore VHT IE from peer with wrong rx_mcs_map This is a workaround for VHT-enabled STAs which break the spec and have the VHT-MCS Rx map filled in with value 3 for all eight spacial streams, an example is AR9462 in AP mode. As per spec, in section 22.1.1 Introduction to the VHT PHY A VHT STA shall support at least single spactial stream VHT-MCSs 0 to 7 (transmit and receive) in all supported channel widths. Some devices in STA mode will get firmware assert when trying to associate, examples are QCA9377 & QCA6174. Packet example of broken VHT Cap IE of AR9462: Tag: VHT Capabilities (IEEE Std 802.11ac/D3.1) Tag Number: VHT Capabilities (IEEE Std 802.11ac/D3.1) (191) Tag length: 12 VHT Capabilities Info: 0x00000000 VHT Supported MCS Set Rx MCS Map: 0xffff .... .... .... ..11 = Rx 1 SS: Not Supported (0x0003) .... .... .... 11.. = Rx 2 SS: Not Supported (0x0003) .... .... ..11 .... = Rx 3 SS: Not Supported (0x0003) .... .... 11.. .... = Rx 4 SS: Not Supported (0x0003) .... ..11 .... .... = Rx 5 SS: Not Supported (0x0003) .... 11.. .... .... = Rx 6 SS: Not Supported (0x0003) ..11 .... .... .... = Rx 7 SS: Not Supported (0x0003) 11.. .... .... .... = Rx 8 SS: Not Supported (0x0003) ...0 0000 0000 0000 = Rx Highest Long GI Data Rate (in Mb/s, 0 = subfield not in use): 0x0000 Tx MCS Map: 0xffff ...0 0000 0000 0000 = Tx Highest Long GI Data Rate (in Mb/s, 0 = subfield not in use): 0x0000 Signed-off-by: Filip Matusiak Signed-off-by: Johannes Berg --- net/mac80211/vht.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/net/mac80211/vht.c b/net/mac80211/vht.c index ee715764a828..6832bf6ab69f 100644 --- a/net/mac80211/vht.c +++ b/net/mac80211/vht.c @@ -270,6 +270,22 @@ ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, vht_cap->vht_mcs.tx_mcs_map |= cpu_to_le16(peer_tx << i * 2); } + /* + * This is a workaround for VHT-enabled STAs which break the spec + * and have the VHT-MCS Rx map filled in with value 3 for all eight + * spacial streams, an example is AR9462. + * + * As per spec, in section 22.1.1 Introduction to the VHT PHY + * A VHT STA shall support at least single spactial stream VHT-MCSs + * 0 to 7 (transmit and receive) in all supported channel widths. + */ + if (vht_cap->vht_mcs.rx_mcs_map == cpu_to_le16(0xFFFF)) { + vht_cap->vht_supported = false; + sdata_info(sdata, "Ignoring VHT IE from %pM due to invalid rx_mcs_map\n", + sta->addr); + return; + } + /* finally set up the bandwidth */ switch (vht_cap->cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) { case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ: From 6c18a6b4e79953ba38bc110e1e42ac45a951b25f Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Thu, 3 Nov 2016 12:12:47 +0100 Subject: [PATCH 632/792] Revert "mac80211: allow using AP_LINK_PS with mac80211-generated TIM IE" This reverts commit c68df2e7be0c1238ea3c281fd744a204ef3b15a0. __sta_info_recalc_tim turns into a no-op if local->ops->set_tim is not set. This prevents the beacon TIM bit from being set for all drivers that do not implement this op (almost all of them), thus thoroughly essential AP mode powersave functionality. Cc: Emmanuel Grumbach Fixes: c68df2e7be0c ("mac80211: allow using AP_LINK_PS with mac80211-generated TIM IE") Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg --- net/mac80211/sta_info.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index 78e9ecbc96e6..8e05032689f0 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -688,7 +688,7 @@ static void __sta_info_recalc_tim(struct sta_info *sta, bool ignore_pending) } /* No need to do anything if the driver does all */ - if (!local->ops->set_tim) + if (ieee80211_hw_check(&local->hw, AP_LINK_PS)) return; if (sta->dead) From 8fdd136f2200e6b7237e7e48453f4a591d768e3e Mon Sep 17 00:00:00 2001 From: "Pedersen, Thomas" Date: Mon, 31 Oct 2016 11:28:40 -0700 Subject: [PATCH 633/792] cfg80211: add bitrate for 20MHz MCS 9 Some drivers (ath10k) report MCS 9 @ 20MHz, which technically isn't defined. To get more meaningful value than 0 out of this however, just extrapolate a bitrate from ratio of MCS 7 and 9 in channels where it is allowed. Signed-off-by: Thomas Pedersen [add a comment about it in the code] Signed-off-by: Johannes Berg --- net/wireless/util.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/wireless/util.c b/net/wireless/util.c index 5ea12afc7706..659b507b347d 100644 --- a/net/wireless/util.c +++ b/net/wireless/util.c @@ -1158,7 +1158,8 @@ static u32 cfg80211_calculate_bitrate_vht(struct rate_info *rate) 58500000, 65000000, 78000000, - 0, + /* not in the spec, but some devices use this: */ + 86500000, }, { 13500000, 27000000, From c1f4c9ede3c799da9f920c1df9ce524145781637 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 4 Nov 2016 10:27:52 +0100 Subject: [PATCH 634/792] mac80211: update A-MPDU flag on tx dequeue MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The sequence number counter is used to derive the starting sequence number. Since that counter is updated on tx dequeue, the A-MPDU flag needs to be up to date at the tme of dequeue as well. This patch prevents sending more A-MPDU frames after the session has been terminated and also ensures that aggregation starts right after the session has been established Fixes: bb42f2d13ffc ("mac80211: Move reorder-sensitive TX handlers to after TXQ dequeue") Signed-off-by: Felix Fietkau Acked-by: Toke Høiland-Jørgensen Signed-off-by: Johannes Berg --- net/mac80211/tx.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 1c56abc49627..d08a8492a846 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -3426,6 +3426,11 @@ begin: goto begin; } + if (test_bit(IEEE80211_TXQ_AMPDU, &txqi->flags)) + info->flags |= IEEE80211_TX_CTL_AMPDU; + else + info->flags &= ~IEEE80211_TX_CTL_AMPDU; + if (info->control.flags & IEEE80211_TX_CTRL_FAST_XMIT) { struct sta_info *sta = container_of(txq->sta, struct sta_info, sta); From fff712cbe38b6d4e211df9c22aabcfd9739c1c2a Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 4 Nov 2016 10:27:53 +0100 Subject: [PATCH 635/792] mac80211: remove bogus skb vif assignment MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The call to ieee80211_txq_enqueue overwrites the vif pointer with the codel enqueue time, so setting it just before that call makes no sense. Signed-off-by: Felix Fietkau Acked-by: Toke Høiland-Jørgensen Signed-off-by: Johannes Berg --- net/mac80211/tx.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index d08a8492a846..fb73e86bdf41 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1501,7 +1501,6 @@ static bool ieee80211_queue_skb(struct ieee80211_local *local, struct sta_info *sta, struct sk_buff *skb) { - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); struct fq *fq = &local->fq; struct ieee80211_vif *vif; struct txq_info *txqi; @@ -1526,8 +1525,6 @@ static bool ieee80211_queue_skb(struct ieee80211_local *local, if (!txqi) return false; - info->control.vif = vif; - spin_lock_bh(&fq->lock); ieee80211_txq_enqueue(local, txqi, skb); spin_unlock_bh(&fq->lock); From a786f96da0d657bf8bd56d8eebb3f31cc45605bb Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Fri, 4 Nov 2016 10:27:54 +0100 Subject: [PATCH 636/792] mac80211: fix A-MSDU aggregation with fast-xmit + txq MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit A-MSDU aggregation alters the QoS header after a frame has been enqueued, so it needs to be ready before enqueue and not overwritten again afterwards Fixes: bb42f2d13ffc ("mac80211: Move reorder-sensitive TX handlers to after TXQ dequeue") Signed-off-by: Felix Fietkau Acked-by: Toke Høiland-Jørgensen Signed-off-by: Johannes Berg --- net/mac80211/tx.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index fb73e86bdf41..bd5f4be89435 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -3210,7 +3210,6 @@ static void ieee80211_xmit_fast_finish(struct ieee80211_sub_if_data *sdata, if (hdr->frame_control & cpu_to_le16(IEEE80211_STYPE_QOS_DATA)) { tid = skb->priority & IEEE80211_QOS_CTL_TAG1D_MASK; - *ieee80211_get_qos_ctl(hdr) = tid; hdr->seq_ctrl = ieee80211_tx_next_seq(sta, tid); } else { info->flags |= IEEE80211_TX_CTL_ASSIGN_SEQ; @@ -3335,6 +3334,11 @@ static bool ieee80211_xmit_fast(struct ieee80211_sub_if_data *sdata, (tid_tx ? IEEE80211_TX_CTL_AMPDU : 0); info->control.flags = IEEE80211_TX_CTRL_FAST_XMIT; + if (hdr->frame_control & cpu_to_le16(IEEE80211_STYPE_QOS_DATA)) { + tid = skb->priority & IEEE80211_QOS_CTL_TAG1D_MASK; + *ieee80211_get_qos_ctl(hdr) = tid; + } + __skb_queue_head_init(&tx.skbs); tx.flags = IEEE80211_TX_UNICAST; From 4fb7f8af1f4c14a2a6cee7c9ff0cf999d918c72d Mon Sep 17 00:00:00 2001 From: Benjamin Beichler Date: Fri, 11 Nov 2016 17:37:56 +0100 Subject: [PATCH 637/792] mac80211_hwsim: fix beacon delta calculation Due to the cast from uint32_t to int64_t, a wrong next beacon timing is calculated and effectively the beacon timer stops working. This is especially bad for 802.11s mesh networks, because discovery breaks without beacons. Signed-off-by: Benjamin Beichler Signed-off-by: Johannes Berg --- drivers/net/wireless/mac80211_hwsim.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 431f13b4faf6..d3bad5779376 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -826,7 +826,7 @@ static void mac80211_hwsim_set_tsf(struct ieee80211_hw *hw, data->bcn_delta = do_div(delta, bcn_int); } else { data->tsf_offset -= delta; - data->bcn_delta = -do_div(delta, bcn_int); + data->bcn_delta = -(s64)do_div(delta, bcn_int); } } From 24c66dfd569c4744fc43aea638155ad2dc1499d8 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 15 Nov 2016 13:55:59 +0000 Subject: [PATCH 638/792] ARM: fix backtrace Recent kernels have changed their behaviour to be more inconsistent when handling printk continuations. With todays kernels, the output looks sane on the console, but dmesg splits individual printk()s which do not have the KERN_CONT prefix into separate lines. Since the assembly code is not trivial to add the KERN_CONT, and we ideally want to avoid using KERN_CONT (as multiple printk()s can race between different threads), convert the assembly dumping the register values to C code, and have the C code build the output a line at a time before dumping to the console. This avoids the KERN_CONT issue, and also avoids situations where the output is intermixed with other console activity. Signed-off-by: Russell King --- arch/arm/kernel/traps.c | 20 ++++++++++++++++++++ arch/arm/lib/backtrace.S | 37 +++---------------------------------- 2 files changed, 23 insertions(+), 34 deletions(-) diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index bc698383e822..9688ec0c6ef4 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -74,6 +74,26 @@ void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long dump_mem("", "Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs)); } +void dump_backtrace_stm(u32 *stack, u32 instruction) +{ + char str[80], *p; + unsigned int x; + int reg; + + for (reg = 10, x = 0, p = str; reg >= 0; reg--) { + if (instruction & BIT(reg)) { + p += sprintf(p, " r%d:%08x", reg, *stack--); + if (++x == 6) { + x = 0; + p = str; + printk("%s\n", str); + } + } + } + if (p != str) + printk("%s\n", str); +} + #ifndef CONFIG_ARM_UNWIND /* * Stack pointers should always be within the kernels view of diff --git a/arch/arm/lib/backtrace.S b/arch/arm/lib/backtrace.S index fab5a50503ae..7d7952e5a3b1 100644 --- a/arch/arm/lib/backtrace.S +++ b/arch/arm/lib/backtrace.S @@ -10,6 +10,7 @@ * 27/03/03 Ian Molton Clean up CONFIG_CPU * */ +#include #include #include .text @@ -83,13 +84,13 @@ for_each_frame: tst frame, mask @ Check for address exceptions teq r3, r1, lsr #11 ldreq r0, [frame, #-8] @ get sp subeq r0, r0, #4 @ point at the last arg - bleq .Ldumpstm @ dump saved registers + bleq dump_backtrace_stm @ dump saved registers 1004: ldr r1, [sv_pc, #0] @ if stmfd sp!, {..., fp, ip, lr, pc} ldr r3, .Ldsi @ instruction exists, teq r3, r1, lsr #11 subeq r0, frame, #16 - bleq .Ldumpstm @ dump saved registers + bleq dump_backtrace_stm @ dump saved registers teq sv_fp, #0 @ zero saved fp means beq no_frame @ no further frames @@ -112,38 +113,6 @@ ENDPROC(c_backtrace) .long 1004b, 1006b .popsection -#define instr r4 -#define reg r5 -#define stack r6 - -.Ldumpstm: stmfd sp!, {instr, reg, stack, r7, lr} - mov stack, r0 - mov instr, r1 - mov reg, #10 - mov r7, #0 -1: mov r3, #1 - ARM( tst instr, r3, lsl reg ) - THUMB( lsl r3, reg ) - THUMB( tst instr, r3 ) - beq 2f - add r7, r7, #1 - teq r7, #6 - moveq r7, #0 - adr r3, .Lcr - addne r3, r3, #1 @ skip newline - ldr r2, [stack], #-4 - mov r1, reg - adr r0, .Lfp - bl printk -2: subs reg, reg, #1 - bpl 1b - teq r7, #0 - adrne r0, .Lcr - blne printk - ldmfd sp!, {instr, reg, stack, r7, pc} - -.Lfp: .asciz " r%d:%08x%s" -.Lcr: .asciz "\n" .Lbad: .asciz "Backtrace aborted due to bad frame pointer <%p>\n" .align .Ldsi: .word 0xe92dd800 >> 11 @ stmfd sp!, {... fp, ip, lr, pc} From 544457fa278216c5fcea6a16e9b2ee8aadaca0ca Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Tue, 1 Nov 2016 21:58:36 +0100 Subject: [PATCH 639/792] ARM: 8624/1: proc-v7m.S: fix init section name There is no .text.init sections. Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/mm/proc-v7m.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mm/proc-v7m.S b/arch/arm/mm/proc-v7m.S index f6d333f09bfe..8dea61640cc1 100644 --- a/arch/arm/mm/proc-v7m.S +++ b/arch/arm/mm/proc-v7m.S @@ -96,7 +96,7 @@ ENTRY(cpu_cm7_proc_fin) ret lr ENDPROC(cpu_cm7_proc_fin) - .section ".text.init", #alloc, #execinstr + .section ".init.text", #alloc, #execinstr __v7m_cm7_setup: mov r8, #(V7M_SCB_CCR_DC | V7M_SCB_CCR_IC| V7M_SCB_CCR_BP) From 256ff1cf6b44cba9c9c2059f4516259e9319a808 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Tue, 15 Nov 2016 14:00:53 +0100 Subject: [PATCH 640/792] ARM: 8628/1: dma-mapping: preallocate DMA-debug hash tables in core_initcall fs_initcall is definitely too late to initialize DMA-debug hash tables, because some drivers might get probed and use DMA mapping framework already in core_initcall. Late initialization of DMA-debug results in false warning about accessing memory, that was not allocated, like this one: ------------[ cut here ]------------ WARNING: CPU: 5 PID: 1 at lib/dma-debug.c:1104 check_unmap+0xa1c/0xe50 exynos-sysmmu 10a60000.sysmmu: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x000000006ebd0000] [size=16384 bytes] Modules linked in: CPU: 5 PID: 1 Comm: swapper/0 Not tainted 4.9.0-rc5-00028-g39dde3d-dirty #44 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [] (unwind_backtrace) from [] (show_stack+0x20/0x24) [] (show_stack) from [] (dump_stack+0x84/0xa0) [] (dump_stack) from [] (__warn+0x14c/0x180) [] (__warn) from [] (warn_slowpath_fmt+0x48/0x50) [] (warn_slowpath_fmt) from [] (check_unmap+0xa1c/0xe50) [] (check_unmap) from [] (debug_dma_unmap_page+0x98/0xc8) [] (debug_dma_unmap_page) from [] (exynos_iommu_domain_free+0x158/0x380) [] (exynos_iommu_domain_free) from [] (iommu_domain_free+0x34/0x60) [] (iommu_domain_free) from [] (release_iommu_mapping+0x30/0xb8) [] (release_iommu_mapping) from [] (arm_iommu_release_mapping+0x4c/0x50) [] (arm_iommu_release_mapping) from [] (s5p_mfc_probe+0x640/0x80c) [] (s5p_mfc_probe) from [] (platform_drv_probe+0x70/0x148) [] (platform_drv_probe) from [] (driver_probe_device+0x12c/0x6b0) [] (driver_probe_device) from [] (__driver_attach+0x128/0x17c) [] (__driver_attach) from [] (bus_for_each_dev+0x88/0xc8) [] (bus_for_each_dev) from [] (driver_attach+0x34/0x58) [] (driver_attach) from [] (bus_add_driver+0x18c/0x32c) [] (bus_add_driver) from [] (driver_register+0x98/0x148) [] (driver_register) from [] (__platform_driver_register+0x58/0x74) [] (__platform_driver_register) from [] (s5p_mfc_driver_init+0x1c/0x20) [] (s5p_mfc_driver_init) from [] (do_one_initcall+0x64/0x258) [] (do_one_initcall) from [] (kernel_init_freeable+0x3d0/0x4d0) [] (kernel_init_freeable) from [] (kernel_init+0x18/0x134) [] (kernel_init) from [] (ret_from_fork+0x14/0x3c) ---[ end trace dc54c54bd3581296 ]--- This patch moves initialization of DMA-debug to core_initcall. This is safe from the initialization perspective. dma_debug_do_init() internally calls debugfs functions and debugfs also gets initialised at core_initcall(), and that is earlier than arch code in the link order, so it will get initialized just before the DMA-debug. Reported-by: Seung-Woo Kim Signed-off-by: Marek Szyprowski Signed-off-by: Russell King --- arch/arm/mm/dma-mapping.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index ab4f74536057..ab7710002ba6 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -1167,7 +1167,7 @@ static int __init dma_debug_do_init(void) dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES); return 0; } -fs_initcall(dma_debug_do_init); +core_initcall(dma_debug_do_init); #ifdef CONFIG_ARM_DMA_USE_IOMMU From c6a385539175ebc603da53aafb7753d39089f32e Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Mon, 14 Nov 2016 19:41:31 +0100 Subject: [PATCH 641/792] kbuild: Steal gcc's pie from the very beginning So Sebastian turned off the PIE for kernel builds but that was too late - Kbuild.include already uses KBUILD_CFLAGS and trying to disable gcc options with, say cc-disable-warning, fails: gcc -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs ... -Wno-sign-compare -fno-asynchronous-unwind-tables -Wframe-address -c -x c /dev/null -o .31392.tmp /dev/null:1:0: error: code model kernel does not support PIC mode because that returns an error and we can't disable the warning. For example in this case: KBUILD_CFLAGS += $(call cc-disable-warning,frame-address,) which leads to gcc issuing all those warnings again. So let's turn off PIE/PIC at the earliest possible moment, when we declare KBUILD_CFLAGS so that cc-disable-warning picks it up too. Also, we need the $(call cc-option ...) because -fno-PIE is supported since gcc v3.4 and our lowest supported gcc version is 3.2 right now. Signed-off-by: Borislav Petkov Cc: stable@vger.kernel.org Cc: Ben Hutchings Cc: Sebastian Andrzej Siewior Signed-off-by: Michal Marek --- Makefile | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/Makefile b/Makefile index 58fc5d935ce6..77ac3f88ec37 100644 --- a/Makefile +++ b/Makefile @@ -399,11 +399,12 @@ KBUILD_CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \ -fno-strict-aliasing -fno-common \ -Werror-implicit-function-declaration \ -Wno-format-security \ - -std=gnu89 + -std=gnu89 $(call cc-option,-fno-PIE) + KBUILD_AFLAGS_KERNEL := KBUILD_CFLAGS_KERNEL := -KBUILD_AFLAGS := -D__ASSEMBLY__ +KBUILD_AFLAGS := -D__ASSEMBLY__ $(call cc-option,-fno-PIE) KBUILD_AFLAGS_MODULE := -DMODULE KBUILD_CFLAGS_MODULE := -DMODULE KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds @@ -622,8 +623,6 @@ include arch/$(SRCARCH)/Makefile KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks,) KBUILD_CFLAGS += $(call cc-disable-warning,maybe-uninitialized,) KBUILD_CFLAGS += $(call cc-disable-warning,frame-address,) -KBUILD_CFLAGS += $(call cc-option,-fno-PIE) -KBUILD_AFLAGS += $(call cc-option,-fno-PIE) ifdef CONFIG_LD_DEAD_CODE_DATA_ELIMINATION KBUILD_CFLAGS += $(call cc-option,-ffunction-sections,) From f6c365fad1034c66f9969d1435ffad9102f966bb Mon Sep 17 00:00:00 2001 From: Jia Jie Ho Date: Mon, 14 Nov 2016 17:06:49 +0800 Subject: [PATCH 642/792] net: ethernet: Fix SGMII unable to switch speed and autonego failure TSE PCS SGMII ethernet has an issue where switching speed doesn't work caused by a faulty register macro offset. This fixes the issue. Signed-off-by: Jia Jie Ho Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.c b/drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.c index 2920e2ee3864..489ef146201e 100644 --- a/drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.c +++ b/drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.c @@ -63,8 +63,8 @@ #define TSE_PCS_SGMII_LINK_TIMER_0 0x0D40 #define TSE_PCS_SGMII_LINK_TIMER_1 0x0003 #define TSE_PCS_SW_RESET_TIMEOUT 100 -#define TSE_PCS_USE_SGMII_AN_MASK BIT(2) -#define TSE_PCS_USE_SGMII_ENA BIT(1) +#define TSE_PCS_USE_SGMII_AN_MASK BIT(1) +#define TSE_PCS_USE_SGMII_ENA BIT(0) #define SGMII_ADAPTER_CTRL_REG 0x00 #define SGMII_ADAPTER_DISABLE 0x0001 From cb434658a8ff151c221a9ac1d44fb6788100cd0d Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 15 Nov 2016 11:39:08 -0500 Subject: [PATCH 643/792] drm/amdgpu/powerplay: drop a redundant NULL check Left over from an earlier rev of the patch. Acked-by: Colin Ian King Cc: Dan Carpenter Cc: Colin King Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c index b0c929dd8beb..13f2b705ea49 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c @@ -1469,8 +1469,6 @@ static int smu7_get_evv_voltages(struct pp_hwmgr *hwmgr) table_info->vddgfx_lookup_table, vv_id, &sclk)) { if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps, PHM_PlatformCaps_ClockStretcher)) { - if (table_info == NULL) - return -EINVAL; sclk_table = table_info->vdd_dep_on_sclk; for (j = 1; j < sclk_table->count; j++) { From 1da2c326e43b0834105993d13610647337bbad67 Mon Sep 17 00:00:00 2001 From: Monk Liu Date: Fri, 11 Nov 2016 11:24:29 +0800 Subject: [PATCH 644/792] drm/amdgpu:fix vpost_needed routine 1,cleanup description/comments 2,for FIJI & passthrough, force post when smc fw version below 22.15 3,for other cases, follow regular rules Signed-off-by: Monk Liu Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 27 ++++++---------------- 1 file changed, 7 insertions(+), 20 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index 7ca07e7b25c1..3161d77bf299 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -658,12 +658,10 @@ static bool amdgpu_vpost_needed(struct amdgpu_device *adev) return false; if (amdgpu_passthrough(adev)) { - /* for FIJI: In whole GPU pass-through virtualization case - * old smc fw won't clear some registers (e.g. MEM_SIZE, BIOS_SCRATCH) - * so amdgpu_card_posted return false and driver will incorrectly skip vPost. - * but if we force vPost do in pass-through case, the driver reload will hang. - * whether doing vPost depends on amdgpu_card_posted if smc version is above - * 00160e00 for FIJI. + /* for FIJI: In whole GPU pass-through virtualization case, after VM reboot + * some old smc fw still need driver do vPost otherwise gpu hang, while + * those smc fw version above 22.15 doesn't have this flaw, so we force + * vpost executed for smc version below 22.15 */ if (adev->asic_type == CHIP_FIJI) { int err; @@ -674,22 +672,11 @@ static bool amdgpu_vpost_needed(struct amdgpu_device *adev) return true; fw_ver = *((uint32_t *)adev->pm.fw->data + 69); - if (fw_ver >= 0x00160e00) - return !amdgpu_card_posted(adev); + if (fw_ver < 0x00160e00) + return true; } - } else { - /* in bare-metal case, amdgpu_card_posted return false - * after system reboot/boot, and return true if driver - * reloaded. - * we shouldn't do vPost after driver reload otherwise GPU - * could hang. - */ - if (amdgpu_card_posted(adev)) - return false; } - - /* we assume vPost is neede for all other cases */ - return true; + return !amdgpu_card_posted(adev); } /** From e1fafdcbe0e3e769c6a83317dd845bc99b4fe61d Mon Sep 17 00:00:00 2001 From: Dennis Dalessandro Date: Mon, 10 Oct 2016 06:14:45 -0700 Subject: [PATCH 645/792] IB/rdmavt: rdmavt can handle non aligned page maps The initial code for rdmavt carried with it a restriction that was a vestige from the qib driver, that to dma map a page it had to be less than a page size. This is not the case on modern hardware, both qib and hfi1 will be just fine with unaligned map requests. This fixes a 4.8 regression where by an IPoIB transfer of > PAGE_SIZE will hang because the dma map page call always fails. This was introduced after commit 5faba5469522 ("IB/ipoib: Report SG feature regardless of HW UD CSUM capability") added the capability to use SG by default. Rather than override this, the HW supports it, so allow SG. Cc: Stable # 4.8 Reviewed-by: Mike Marciniszyn Signed-off-by: Dennis Dalessandro Signed-off-by: Doug Ledford --- drivers/infiniband/sw/rdmavt/dma.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/infiniband/sw/rdmavt/dma.c b/drivers/infiniband/sw/rdmavt/dma.c index 01f71caa3ac4..f2cefb0d9180 100644 --- a/drivers/infiniband/sw/rdmavt/dma.c +++ b/drivers/infiniband/sw/rdmavt/dma.c @@ -90,9 +90,6 @@ static u64 rvt_dma_map_page(struct ib_device *dev, struct page *page, if (WARN_ON(!valid_dma_direction(direction))) return BAD_DMA_ADDRESS; - if (offset + size > PAGE_SIZE) - return BAD_DMA_ADDRESS; - addr = (u64)page_address(page); if (addr) addr += offset; From 39eb2795f19233330bc14a8450b4042d784b15a7 Mon Sep 17 00:00:00 2001 From: Tadeusz Struk Date: Mon, 10 Oct 2016 06:14:50 -0700 Subject: [PATCH 646/792] IB/hfi1: Remove redundant sysfs irq affinity entry The IRQ affinity entry is not needed after the irq notifier patch has been added to the hfi1 driver. The irq affinity settings for SDMA engine should be set using the standard /proc/irq// interface. Reviewed-by: Jianxin Xiong Signed-off-by: Tadeusz Struk Signed-off-by: Dennis Dalessandro Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/affinity.c | 72 --------------------------- drivers/infiniband/hw/hfi1/affinity.h | 4 -- drivers/infiniband/hw/hfi1/sysfs.c | 25 ---------- 3 files changed, 101 deletions(-) diff --git a/drivers/infiniband/hw/hfi1/affinity.c b/drivers/infiniband/hw/hfi1/affinity.c index a26a9a0bfc41..67ea85a56945 100644 --- a/drivers/infiniband/hw/hfi1/affinity.c +++ b/drivers/infiniband/hw/hfi1/affinity.c @@ -775,75 +775,3 @@ void hfi1_put_proc_affinity(int cpu) } mutex_unlock(&affinity->lock); } - -int hfi1_set_sdma_affinity(struct hfi1_devdata *dd, const char *buf, - size_t count) -{ - struct hfi1_affinity_node *entry; - cpumask_var_t mask; - int ret, i; - - mutex_lock(&node_affinity.lock); - entry = node_affinity_lookup(dd->node); - - if (!entry) { - ret = -EINVAL; - goto unlock; - } - - ret = zalloc_cpumask_var(&mask, GFP_KERNEL); - if (!ret) { - ret = -ENOMEM; - goto unlock; - } - - ret = cpulist_parse(buf, mask); - if (ret) - goto out; - - if (!cpumask_subset(mask, cpu_online_mask) || cpumask_empty(mask)) { - dd_dev_warn(dd, "Invalid CPU mask\n"); - ret = -EINVAL; - goto out; - } - - /* reset the SDMA interrupt affinity details */ - init_cpu_mask_set(&entry->def_intr); - cpumask_copy(&entry->def_intr.mask, mask); - - /* Reassign the affinity for each SDMA interrupt. */ - for (i = 0; i < dd->num_msix_entries; i++) { - struct hfi1_msix_entry *msix; - - msix = &dd->msix_entries[i]; - if (msix->type != IRQ_SDMA) - continue; - - ret = get_irq_affinity(dd, msix); - - if (ret) - break; - } -out: - free_cpumask_var(mask); -unlock: - mutex_unlock(&node_affinity.lock); - return ret ? ret : strnlen(buf, PAGE_SIZE); -} - -int hfi1_get_sdma_affinity(struct hfi1_devdata *dd, char *buf) -{ - struct hfi1_affinity_node *entry; - - mutex_lock(&node_affinity.lock); - entry = node_affinity_lookup(dd->node); - - if (!entry) { - mutex_unlock(&node_affinity.lock); - return -EINVAL; - } - - cpumap_print_to_pagebuf(true, buf, &entry->def_intr.mask); - mutex_unlock(&node_affinity.lock); - return strnlen(buf, PAGE_SIZE); -} diff --git a/drivers/infiniband/hw/hfi1/affinity.h b/drivers/infiniband/hw/hfi1/affinity.h index b89ea3c0ee1a..42e63316afd1 100644 --- a/drivers/infiniband/hw/hfi1/affinity.h +++ b/drivers/infiniband/hw/hfi1/affinity.h @@ -102,10 +102,6 @@ int hfi1_get_proc_affinity(int); /* Release a CPU used by a user process. */ void hfi1_put_proc_affinity(int); -int hfi1_get_sdma_affinity(struct hfi1_devdata *dd, char *buf); -int hfi1_set_sdma_affinity(struct hfi1_devdata *dd, const char *buf, - size_t count); - struct hfi1_affinity_node { int node; struct cpu_mask_set def_intr; diff --git a/drivers/infiniband/hw/hfi1/sysfs.c b/drivers/infiniband/hw/hfi1/sysfs.c index edba22461a9c..919a5474e651 100644 --- a/drivers/infiniband/hw/hfi1/sysfs.c +++ b/drivers/infiniband/hw/hfi1/sysfs.c @@ -49,7 +49,6 @@ #include "hfi.h" #include "mad.h" #include "trace.h" -#include "affinity.h" /* * Start of per-port congestion control structures and support code @@ -623,27 +622,6 @@ static ssize_t show_tempsense(struct device *device, return ret; } -static ssize_t show_sdma_affinity(struct device *device, - struct device_attribute *attr, char *buf) -{ - struct hfi1_ibdev *dev = - container_of(device, struct hfi1_ibdev, rdi.ibdev.dev); - struct hfi1_devdata *dd = dd_from_dev(dev); - - return hfi1_get_sdma_affinity(dd, buf); -} - -static ssize_t store_sdma_affinity(struct device *device, - struct device_attribute *attr, - const char *buf, size_t count) -{ - struct hfi1_ibdev *dev = - container_of(device, struct hfi1_ibdev, rdi.ibdev.dev); - struct hfi1_devdata *dd = dd_from_dev(dev); - - return hfi1_set_sdma_affinity(dd, buf, count); -} - /* * end of per-unit (or driver, in some cases, but replicated * per unit) functions @@ -658,8 +636,6 @@ static DEVICE_ATTR(serial, S_IRUGO, show_serial, NULL); static DEVICE_ATTR(boardversion, S_IRUGO, show_boardversion, NULL); static DEVICE_ATTR(tempsense, S_IRUGO, show_tempsense, NULL); static DEVICE_ATTR(chip_reset, S_IWUSR, NULL, store_chip_reset); -static DEVICE_ATTR(sdma_affinity, S_IWUSR | S_IRUGO, show_sdma_affinity, - store_sdma_affinity); static struct device_attribute *hfi1_attributes[] = { &dev_attr_hw_rev, @@ -670,7 +646,6 @@ static struct device_attribute *hfi1_attributes[] = { &dev_attr_boardversion, &dev_attr_tempsense, &dev_attr_chip_reset, - &dev_attr_sdma_affinity, }; int hfi1_create_port_files(struct ib_device *ibdev, u8 port_num, From d9ac4555fb2bcd6b794aaa0b39acad81111d9f42 Mon Sep 17 00:00:00 2001 From: Jakub Pawlak Date: Mon, 10 Oct 2016 06:14:56 -0700 Subject: [PATCH 647/792] IB/hfi1: Fix integrity check flags default values Prevent setting up integrity check flags when module is loaded with NO_INTEGRITY capability. Reviewed-by: Dean Luick Signed-off-by: Jakub Pawlak Signed-off-by: Dennis Dalessandro Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/hfi.h | 40 +++++++++++++++++++++---------- drivers/infiniband/hw/hfi1/pio.c | 13 +++------- drivers/infiniband/hw/hfi1/sdma.c | 19 ++------------- 3 files changed, 32 insertions(+), 40 deletions(-) diff --git a/drivers/infiniband/hw/hfi1/hfi.h b/drivers/infiniband/hw/hfi1/hfi.h index 7eef11b316ff..3c06d204bafd 100644 --- a/drivers/infiniband/hw/hfi1/hfi.h +++ b/drivers/infiniband/hw/hfi1/hfi.h @@ -1848,7 +1848,13 @@ extern struct mutex hfi1_mutex; static inline u64 hfi1_pkt_default_send_ctxt_mask(struct hfi1_devdata *dd, u16 ctxt_type) { - u64 base_sc_integrity = + u64 base_sc_integrity; + + /* No integrity checks if HFI1_CAP_NO_INTEGRITY is set */ + if (HFI1_CAP_IS_KSET(NO_INTEGRITY)) + return 0; + + base_sc_integrity = SEND_CTXT_CHECK_ENABLE_DISALLOW_BYPASS_BAD_PKT_LEN_SMASK | SEND_CTXT_CHECK_ENABLE_DISALLOW_PBC_STATIC_RATE_CONTROL_SMASK | SEND_CTXT_CHECK_ENABLE_DISALLOW_TOO_LONG_BYPASS_PACKETS_SMASK @@ -1863,7 +1869,6 @@ static inline u64 hfi1_pkt_default_send_ctxt_mask(struct hfi1_devdata *dd, | SEND_CTXT_CHECK_ENABLE_CHECK_VL_MAPPING_SMASK | SEND_CTXT_CHECK_ENABLE_CHECK_OPCODE_SMASK | SEND_CTXT_CHECK_ENABLE_CHECK_SLID_SMASK - | SEND_CTXT_CHECK_ENABLE_CHECK_JOB_KEY_SMASK | SEND_CTXT_CHECK_ENABLE_CHECK_VL_SMASK | SEND_CTXT_CHECK_ENABLE_CHECK_ENABLE_SMASK; @@ -1872,18 +1877,23 @@ static inline u64 hfi1_pkt_default_send_ctxt_mask(struct hfi1_devdata *dd, else base_sc_integrity |= HFI1_PKT_KERNEL_SC_INTEGRITY; - if (is_ax(dd)) - /* turn off send-side job key checks - A0 */ - return base_sc_integrity & - ~SEND_CTXT_CHECK_ENABLE_CHECK_JOB_KEY_SMASK; + /* turn on send-side job key checks if !A0 */ + if (!is_ax(dd)) + base_sc_integrity |= SEND_CTXT_CHECK_ENABLE_CHECK_JOB_KEY_SMASK; + return base_sc_integrity; } static inline u64 hfi1_pkt_base_sdma_integrity(struct hfi1_devdata *dd) { - u64 base_sdma_integrity = + u64 base_sdma_integrity; + + /* No integrity checks if HFI1_CAP_NO_INTEGRITY is set */ + if (HFI1_CAP_IS_KSET(NO_INTEGRITY)) + return 0; + + base_sdma_integrity = SEND_DMA_CHECK_ENABLE_DISALLOW_BYPASS_BAD_PKT_LEN_SMASK - | SEND_DMA_CHECK_ENABLE_DISALLOW_PBC_STATIC_RATE_CONTROL_SMASK | SEND_DMA_CHECK_ENABLE_DISALLOW_TOO_LONG_BYPASS_PACKETS_SMASK | SEND_DMA_CHECK_ENABLE_DISALLOW_TOO_LONG_IB_PACKETS_SMASK | SEND_DMA_CHECK_ENABLE_DISALLOW_BAD_PKT_LEN_SMASK @@ -1895,14 +1905,18 @@ static inline u64 hfi1_pkt_base_sdma_integrity(struct hfi1_devdata *dd) | SEND_DMA_CHECK_ENABLE_CHECK_VL_MAPPING_SMASK | SEND_DMA_CHECK_ENABLE_CHECK_OPCODE_SMASK | SEND_DMA_CHECK_ENABLE_CHECK_SLID_SMASK - | SEND_DMA_CHECK_ENABLE_CHECK_JOB_KEY_SMASK | SEND_DMA_CHECK_ENABLE_CHECK_VL_SMASK | SEND_DMA_CHECK_ENABLE_CHECK_ENABLE_SMASK; - if (is_ax(dd)) - /* turn off send-side job key checks - A0 */ - return base_sdma_integrity & - ~SEND_DMA_CHECK_ENABLE_CHECK_JOB_KEY_SMASK; + if (!HFI1_CAP_IS_KSET(STATIC_RATE_CTRL)) + base_sdma_integrity |= + SEND_DMA_CHECK_ENABLE_DISALLOW_PBC_STATIC_RATE_CONTROL_SMASK; + + /* turn on send-side job key checks if !A0 */ + if (!is_ax(dd)) + base_sdma_integrity |= + SEND_DMA_CHECK_ENABLE_CHECK_JOB_KEY_SMASK; + return base_sdma_integrity; } diff --git a/drivers/infiniband/hw/hfi1/pio.c b/drivers/infiniband/hw/hfi1/pio.c index 50a3a36d9363..d89b8745d4c1 100644 --- a/drivers/infiniband/hw/hfi1/pio.c +++ b/drivers/infiniband/hw/hfi1/pio.c @@ -668,19 +668,12 @@ void sc_set_cr_threshold(struct send_context *sc, u32 new_threshold) void set_pio_integrity(struct send_context *sc) { struct hfi1_devdata *dd = sc->dd; - u64 reg = 0; u32 hw_context = sc->hw_context; int type = sc->type; - /* - * No integrity checks if HFI1_CAP_NO_INTEGRITY is set, or if - * we're snooping. - */ - if (likely(!HFI1_CAP_IS_KSET(NO_INTEGRITY)) && - dd->hfi1_snoop.mode_flag != HFI1_PORT_SNOOP_MODE) - reg = hfi1_pkt_default_send_ctxt_mask(dd, type); - - write_kctxt_csr(dd, hw_context, SC(CHECK_ENABLE), reg); + write_kctxt_csr(dd, hw_context, + SC(CHECK_ENABLE), + hfi1_pkt_default_send_ctxt_mask(dd, type)); } static u32 get_buffers_allocated(struct send_context *sc) diff --git a/drivers/infiniband/hw/hfi1/sdma.c b/drivers/infiniband/hw/hfi1/sdma.c index fd39bcaa062d..9cbe52d21077 100644 --- a/drivers/infiniband/hw/hfi1/sdma.c +++ b/drivers/infiniband/hw/hfi1/sdma.c @@ -2009,11 +2009,6 @@ static void sdma_hw_start_up(struct sdma_engine *sde) write_sde_csr(sde, SD(ENG_ERR_CLEAR), reg); } -#define CLEAR_STATIC_RATE_CONTROL_SMASK(r) \ -(r &= ~SEND_DMA_CHECK_ENABLE_DISALLOW_PBC_STATIC_RATE_CONTROL_SMASK) - -#define SET_STATIC_RATE_CONTROL_SMASK(r) \ -(r |= SEND_DMA_CHECK_ENABLE_DISALLOW_PBC_STATIC_RATE_CONTROL_SMASK) /* * set_sdma_integrity * @@ -2022,19 +2017,9 @@ static void sdma_hw_start_up(struct sdma_engine *sde) static void set_sdma_integrity(struct sdma_engine *sde) { struct hfi1_devdata *dd = sde->dd; - u64 reg; - if (unlikely(HFI1_CAP_IS_KSET(NO_INTEGRITY))) - return; - - reg = hfi1_pkt_base_sdma_integrity(dd); - - if (HFI1_CAP_IS_KSET(STATIC_RATE_CTRL)) - CLEAR_STATIC_RATE_CONTROL_SMASK(reg); - else - SET_STATIC_RATE_CONTROL_SMASK(reg); - - write_sde_csr(sde, SD(CHECK_ENABLE), reg); + write_sde_csr(sde, SD(CHECK_ENABLE), + hfi1_pkt_base_sdma_integrity(dd)); } static void init_sdma_regs( From acd7c8fe14938a315f0ac1b92a92375f7226c2fd Mon Sep 17 00:00:00 2001 From: Tadeusz Struk Date: Tue, 25 Oct 2016 08:57:55 -0700 Subject: [PATCH 648/792] IB/hfi1: Fix an Oops on pci device force remove This patch fixes an Oops on device unbind, when the device is used by a PSM user process. PSM processes access device resources which are freed on device removal. Similar protection exists in uverbs in ib_core for Verbs clients, but PSM doesn't use ib_uverbs hence a separate protection is required for PSM clients. Cc: Jason Gunthorpe Reviewed-by: Ira Weiny Reviewed-by: Dean Luick Reviewed-by: Dennis Dalessandro Signed-off-by: Tadeusz Struk Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/chip.c | 5 +++++ drivers/infiniband/hw/hfi1/file_ops.c | 19 ++++++++++++++++--- drivers/infiniband/hw/hfi1/hfi.h | 4 ++++ drivers/infiniband/hw/hfi1/init.c | 21 +++++++++++++++++++-- 4 files changed, 44 insertions(+), 5 deletions(-) diff --git a/drivers/infiniband/hw/hfi1/chip.c b/drivers/infiniband/hw/hfi1/chip.c index 9bf5f23544d4..799215255b49 100644 --- a/drivers/infiniband/hw/hfi1/chip.c +++ b/drivers/infiniband/hw/hfi1/chip.c @@ -14691,6 +14691,11 @@ struct hfi1_devdata *hfi1_init_dd(struct pci_dev *pdev, if (ret) goto bail_free_cntrs; + init_completion(&dd->user_comp); + + /* The user refcount starts with one to inidicate an active device */ + atomic_set(&dd->user_refcount, 1); + goto bail; bail_free_rcverr: diff --git a/drivers/infiniband/hw/hfi1/file_ops.c b/drivers/infiniband/hw/hfi1/file_ops.c index 677efa0e8cd6..bd786b7bd30b 100644 --- a/drivers/infiniband/hw/hfi1/file_ops.c +++ b/drivers/infiniband/hw/hfi1/file_ops.c @@ -172,6 +172,9 @@ static int hfi1_file_open(struct inode *inode, struct file *fp) struct hfi1_devdata, user_cdev); + if (!atomic_inc_not_zero(&dd->user_refcount)) + return -ENXIO; + /* Just take a ref now. Not all opens result in a context assign */ kobject_get(&dd->kobj); @@ -183,11 +186,17 @@ static int hfi1_file_open(struct inode *inode, struct file *fp) fd->rec_cpu_num = -1; /* no cpu affinity by default */ fd->mm = current->mm; atomic_inc(&fd->mm->mm_count); + fp->private_data = fd; + } else { + fp->private_data = NULL; + + if (atomic_dec_and_test(&dd->user_refcount)) + complete(&dd->user_comp); + + return -ENOMEM; } - fp->private_data = fd; - - return fd ? 0 : -ENOMEM; + return 0; } static long hfi1_file_ioctl(struct file *fp, unsigned int cmd, @@ -798,6 +807,10 @@ static int hfi1_file_close(struct inode *inode, struct file *fp) done: mmdrop(fdata->mm); kobject_put(&dd->kobj); + + if (atomic_dec_and_test(&dd->user_refcount)) + complete(&dd->user_comp); + kfree(fdata); return 0; } diff --git a/drivers/infiniband/hw/hfi1/hfi.h b/drivers/infiniband/hw/hfi1/hfi.h index 3c06d204bafd..368e96c109a5 100644 --- a/drivers/infiniband/hw/hfi1/hfi.h +++ b/drivers/infiniband/hw/hfi1/hfi.h @@ -1174,6 +1174,10 @@ struct hfi1_devdata { spinlock_t aspm_lock; /* Number of verbs contexts which have disabled ASPM */ atomic_t aspm_disabled_cnt; + /* Keeps track of user space clients */ + atomic_t user_refcount; + /* Used to wait for outstanding user space clients before dev removal */ + struct completion user_comp; struct hfi1_affinity *affinity; struct rhashtable sdma_rht; diff --git a/drivers/infiniband/hw/hfi1/init.c b/drivers/infiniband/hw/hfi1/init.c index 60db61536fed..e28a6b633ea9 100644 --- a/drivers/infiniband/hw/hfi1/init.c +++ b/drivers/infiniband/hw/hfi1/init.c @@ -1538,12 +1538,31 @@ bail: return ret; } +static void wait_for_clients(struct hfi1_devdata *dd) +{ + /* + * Remove the device init value and complete the device if there is + * no clients or wait for active clients to finish. + */ + if (atomic_dec_and_test(&dd->user_refcount)) + complete(&dd->user_comp); + + wait_for_completion(&dd->user_comp); +} + static void remove_one(struct pci_dev *pdev) { struct hfi1_devdata *dd = pci_get_drvdata(pdev); /* close debugfs files before ib unregister */ hfi1_dbg_ibdev_exit(&dd->verbs_dev); + + /* remove the /dev hfi1 interface */ + hfi1_device_remove(dd); + + /* wait for existing user space clients to finish */ + wait_for_clients(dd); + /* unregister from IB core */ hfi1_unregister_ib_device(dd); @@ -1558,8 +1577,6 @@ static void remove_one(struct pci_dev *pdev) /* wait until all of our (qsfp) queue_work() calls complete */ flush_workqueue(ib_wq); - hfi1_device_remove(dd); - postinit_cleanup(dd); } From 83fb4af6800deb4f3d19b297df6148cda5c016de Mon Sep 17 00:00:00 2001 From: Krzysztof Blaszkowski Date: Mon, 17 Oct 2016 04:19:24 -0700 Subject: [PATCH 649/792] IB/hfi1: Return ENODEV for unsupported PCI device ids. Clean up device type checking. Reviewed-by: Dean Luick Signed-off-by: Krzysztof Blaszkowski Signed-off-by: Tymoteusz Kielan Signed-off-by: Dennis Dalessandro Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/init.c | 25 ++++++++++++------------- 1 file changed, 12 insertions(+), 13 deletions(-) diff --git a/drivers/infiniband/hw/hfi1/init.c b/drivers/infiniband/hw/hfi1/init.c index e28a6b633ea9..baea53f862f9 100644 --- a/drivers/infiniband/hw/hfi1/init.c +++ b/drivers/infiniband/hw/hfi1/init.c @@ -1402,7 +1402,7 @@ static void postinit_cleanup(struct hfi1_devdata *dd) static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { int ret = 0, j, pidx, initfail; - struct hfi1_devdata *dd = ERR_PTR(-EINVAL); + struct hfi1_devdata *dd; struct hfi1_pportdata *ppd; /* First, lock the non-writable module parameters */ @@ -1461,26 +1461,25 @@ static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (ret) goto bail; - /* - * Do device-specific initialization, function table setup, dd - * allocation, etc. - */ - switch (ent->device) { - case PCI_DEVICE_ID_INTEL0: - case PCI_DEVICE_ID_INTEL1: - dd = hfi1_init_dd(pdev, ent); - break; - default: + if (!(ent->device == PCI_DEVICE_ID_INTEL0 || + ent->device == PCI_DEVICE_ID_INTEL1)) { hfi1_early_err(&pdev->dev, "Failing on unknown Intel deviceid 0x%x\n", ent->device); ret = -ENODEV; + goto clean_bail; } - if (IS_ERR(dd)) + /* + * Do device-specific initialization, function table setup, dd + * allocation, etc. + */ + dd = hfi1_init_dd(pdev, ent); + + if (IS_ERR(dd)) { ret = PTR_ERR(dd); - if (ret) goto clean_bail; /* error already printed */ + } ret = create_workqueues(dd); if (ret) From 4dfe7cceb2bfd98783b4966d7c881a7552932d31 Mon Sep 17 00:00:00 2001 From: Jianxin Xiong Date: Mon, 17 Oct 2016 04:19:41 -0700 Subject: [PATCH 650/792] IB/hfi1: Fix a potential memory leak in hfi1_create_ctxts() In the function hfi1_create_ctxts the array "dd->rcd" is allocated and then populated with allocated resources in a loop. Previously, if error happened during the loop, only resource allocated in the current iteration would be freed. The array itself would then be freed, leaving the resources that were allocated in previous iterations and referenced by the array elements in limbo. This patch makes sure all allocated resources are freed before freeing the array "dd->rcd". Also the resource allocation now takes account of the numa node the device is attached to. Reviewed-by: Tadeusz Struk Signed-off-by: Jianxin Xiong Signed-off-by: Dennis Dalessandro Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/init.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/infiniband/hw/hfi1/init.c b/drivers/infiniband/hw/hfi1/init.c index baea53f862f9..e27b65dbe293 100644 --- a/drivers/infiniband/hw/hfi1/init.c +++ b/drivers/infiniband/hw/hfi1/init.c @@ -144,6 +144,8 @@ int hfi1_create_ctxts(struct hfi1_devdata *dd) struct hfi1_ctxtdata *rcd; ppd = dd->pport + (i % dd->num_pports); + + /* dd->rcd[i] gets assigned inside the callee */ rcd = hfi1_create_ctxtdata(ppd, i, dd->node); if (!rcd) { dd_dev_err(dd, @@ -169,8 +171,6 @@ int hfi1_create_ctxts(struct hfi1_devdata *dd) if (!rcd->sc) { dd_dev_err(dd, "Unable to allocate kernel send context, failing\n"); - dd->rcd[rcd->ctxt] = NULL; - hfi1_free_ctxtdata(dd, rcd); goto nomem; } @@ -178,9 +178,6 @@ int hfi1_create_ctxts(struct hfi1_devdata *dd) if (ret < 0) { dd_dev_err(dd, "Failed to setup kernel receive context, failing\n"); - sc_free(rcd->sc); - dd->rcd[rcd->ctxt] = NULL; - hfi1_free_ctxtdata(dd, rcd); ret = -EFAULT; goto bail; } @@ -196,6 +193,10 @@ int hfi1_create_ctxts(struct hfi1_devdata *dd) nomem: ret = -ENOMEM; bail: + if (dd->rcd) { + for (i = 0; i < dd->num_rcv_contexts; ++i) + hfi1_free_ctxtdata(dd, dd->rcd[i]); + } kfree(dd->rcd); dd->rcd = NULL; return ret; @@ -216,7 +217,7 @@ struct hfi1_ctxtdata *hfi1_create_ctxtdata(struct hfi1_pportdata *ppd, u32 ctxt, dd->num_rcv_contexts - dd->first_user_ctxt) kctxt_ngroups = (dd->rcv_entries.nctxt_extra - (dd->num_rcv_contexts - dd->first_user_ctxt)); - rcd = kzalloc(sizeof(*rcd), GFP_KERNEL); + rcd = kzalloc_node(sizeof(*rcd), GFP_KERNEL, numa); if (rcd) { u32 rcvtids, max_entries; From eacc830f95c0d8c5cbbda1bdba2ddc8f14bc248d Mon Sep 17 00:00:00 2001 From: Dennis Dalessandro Date: Mon, 17 Oct 2016 04:19:52 -0700 Subject: [PATCH 651/792] IB/hfi1: Remove leftover snoop references A few snoop related variables were missed in the snoop/capture removal to get out of staging. Go back and clean those up too. Reviewed-by: Dean Luick Signed-off-by: Dennis Dalessandro Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/chip.c | 18 +------- drivers/infiniband/hw/hfi1/hfi.h | 40 +----------------- drivers/infiniband/hw/hfi1/trace_rx.h | 60 --------------------------- 3 files changed, 4 insertions(+), 114 deletions(-) diff --git a/drivers/infiniband/hw/hfi1/chip.c b/drivers/infiniband/hw/hfi1/chip.c index 799215255b49..859341a25e56 100644 --- a/drivers/infiniband/hw/hfi1/chip.c +++ b/drivers/infiniband/hw/hfi1/chip.c @@ -6301,19 +6301,8 @@ void set_up_vl15(struct hfi1_devdata *dd, u8 vau, u16 vl15buf) /* leave shared count at zero for both global and VL15 */ write_global_credit(dd, vau, vl15buf, 0); - /* We may need some credits for another VL when sending packets - * with the snoop interface. Dividing it down the middle for VL15 - * and VL0 should suffice. - */ - if (unlikely(dd->hfi1_snoop.mode_flag == HFI1_PORT_SNOOP_MODE)) { - write_csr(dd, SEND_CM_CREDIT_VL15, (u64)(vl15buf >> 1) - << SEND_CM_CREDIT_VL15_DEDICATED_LIMIT_VL_SHIFT); - write_csr(dd, SEND_CM_CREDIT_VL, (u64)(vl15buf >> 1) - << SEND_CM_CREDIT_VL_DEDICATED_LIMIT_VL_SHIFT); - } else { - write_csr(dd, SEND_CM_CREDIT_VL15, (u64)vl15buf - << SEND_CM_CREDIT_VL15_DEDICATED_LIMIT_VL_SHIFT); - } + write_csr(dd, SEND_CM_CREDIT_VL15, (u64)vl15buf + << SEND_CM_CREDIT_VL15_DEDICATED_LIMIT_VL_SHIFT); } /* @@ -9915,9 +9904,6 @@ static void set_lidlmc(struct hfi1_pportdata *ppd) u32 mask = ~((1U << ppd->lmc) - 1); u64 c1 = read_csr(ppd->dd, DCC_CFG_PORT_CONFIG1); - if (dd->hfi1_snoop.mode_flag) - dd_dev_info(dd, "Set lid/lmc while snooping"); - c1 &= ~(DCC_CFG_PORT_CONFIG1_TARGET_DLID_SMASK | DCC_CFG_PORT_CONFIG1_DLID_MASK_SMASK); c1 |= ((ppd->lid & DCC_CFG_PORT_CONFIG1_TARGET_DLID_MASK) diff --git a/drivers/infiniband/hw/hfi1/hfi.h b/drivers/infiniband/hw/hfi1/hfi.h index 368e96c109a5..93e2fcebd083 100644 --- a/drivers/infiniband/hw/hfi1/hfi.h +++ b/drivers/infiniband/hw/hfi1/hfi.h @@ -367,26 +367,6 @@ struct hfi1_packet { u8 etype; }; -/* - * Private data for snoop/capture support. - */ -struct hfi1_snoop_data { - int mode_flag; - struct cdev cdev; - struct device *class_dev; - /* protect snoop data */ - spinlock_t snoop_lock; - struct list_head queue; - wait_queue_head_t waitq; - void *filter_value; - int (*filter_callback)(void *hdr, void *data, void *value); - u64 dcc_cfg; /* saved value of DCC Cfg register */ -}; - -/* snoop mode_flag values */ -#define HFI1_PORT_SNOOP_MODE 1U -#define HFI1_PORT_CAPTURE_MODE 2U - struct rvt_sge_state; /* @@ -1104,8 +1084,6 @@ struct hfi1_devdata { char *portcntrnames; size_t portcntrnameslen; - struct hfi1_snoop_data hfi1_snoop; - struct err_info_rcvport err_info_rcvport; struct err_info_constraint err_info_rcv_constraint; struct err_info_constraint err_info_xmit_constraint; @@ -1141,8 +1119,8 @@ struct hfi1_devdata { rhf_rcv_function_ptr normal_rhf_rcv_functions[8]; /* - * Handlers for outgoing data so that snoop/capture does not - * have to have its hooks in the send path + * Capability to have different send engines simply by changing a + * pointer value. */ send_routine process_pio_send; send_routine process_dma_send; @@ -1225,8 +1203,6 @@ struct hfi1_devdata *hfi1_lookup(int unit); extern u32 hfi1_cpulist_count; extern unsigned long *hfi1_cpulist; -extern unsigned int snoop_drop_send; -extern unsigned int snoop_force_capture; int hfi1_init(struct hfi1_devdata *, int); int hfi1_count_units(int *npresentp, int *nupp); int hfi1_count_active_units(void); @@ -1561,13 +1537,6 @@ void set_up_vl15(struct hfi1_devdata *dd, u8 vau, u16 vl15buf); void reset_link_credits(struct hfi1_devdata *dd); void assign_remote_cm_au_table(struct hfi1_devdata *dd, u8 vcu); -int snoop_recv_handler(struct hfi1_packet *packet); -int snoop_send_dma_handler(struct rvt_qp *qp, struct hfi1_pkt_state *ps, - u64 pbc); -int snoop_send_pio_handler(struct rvt_qp *qp, struct hfi1_pkt_state *ps, - u64 pbc); -void snoop_inline_pio_send(struct hfi1_devdata *dd, struct pio_buf *pbuf, - u64 pbc, const void *from, size_t count); int set_buffer_control(struct hfi1_pportdata *ppd, struct buffer_control *bc); static inline struct hfi1_devdata *dd_from_ppd(struct hfi1_pportdata *ppd) @@ -1803,8 +1772,6 @@ int kdeth_process_expected(struct hfi1_packet *packet); int kdeth_process_eager(struct hfi1_packet *packet); int process_receive_invalid(struct hfi1_packet *packet); -extern rhf_rcv_function_ptr snoop_rhf_rcv_functions[8]; - void update_sge(struct rvt_sge_state *ss, u32 length); /* global module parameter variables */ @@ -1831,9 +1798,6 @@ extern struct mutex hfi1_mutex; #define DRIVER_NAME "hfi1" #define HFI1_USER_MINOR_BASE 0 #define HFI1_TRACE_MINOR 127 -#define HFI1_DIAGPKT_MINOR 128 -#define HFI1_DIAG_MINOR_BASE 129 -#define HFI1_SNOOP_CAPTURE_BASE 200 #define HFI1_NMINORS 255 #define PCI_VENDOR_ID_INTEL 0x8086 diff --git a/drivers/infiniband/hw/hfi1/trace_rx.h b/drivers/infiniband/hw/hfi1/trace_rx.h index 11e02b228922..f77e59fb43fe 100644 --- a/drivers/infiniband/hw/hfi1/trace_rx.h +++ b/drivers/infiniband/hw/hfi1/trace_rx.h @@ -253,66 +253,6 @@ TRACE_EVENT(hfi1_mmu_invalidate, ) ); -#define SNOOP_PRN \ - "slid %.4x dlid %.4x qpn 0x%.6x opcode 0x%.2x,%s " \ - "svc lvl %d pkey 0x%.4x [header = %d bytes] [data = %d bytes]" - -TRACE_EVENT(snoop_capture, - TP_PROTO(struct hfi1_devdata *dd, - int hdr_len, - struct ib_header *hdr, - int data_len, - void *data), - TP_ARGS(dd, hdr_len, hdr, data_len, data), - TP_STRUCT__entry( - DD_DEV_ENTRY(dd) - __field(u16, slid) - __field(u16, dlid) - __field(u32, qpn) - __field(u8, opcode) - __field(u8, sl) - __field(u16, pkey) - __field(u32, hdr_len) - __field(u32, data_len) - __field(u8, lnh) - __dynamic_array(u8, raw_hdr, hdr_len) - __dynamic_array(u8, raw_pkt, data_len) - ), - TP_fast_assign( - struct ib_other_headers *ohdr; - - __entry->lnh = (u8)(be16_to_cpu(hdr->lrh[0]) & 3); - if (__entry->lnh == HFI1_LRH_BTH) - ohdr = &hdr->u.oth; - else - ohdr = &hdr->u.l.oth; - DD_DEV_ASSIGN(dd); - __entry->slid = be16_to_cpu(hdr->lrh[3]); - __entry->dlid = be16_to_cpu(hdr->lrh[1]); - __entry->qpn = be32_to_cpu(ohdr->bth[1]) & RVT_QPN_MASK; - __entry->opcode = (be32_to_cpu(ohdr->bth[0]) >> 24) & 0xff; - __entry->sl = (u8)(be16_to_cpu(hdr->lrh[0]) >> 4) & 0xf; - __entry->pkey = be32_to_cpu(ohdr->bth[0]) & 0xffff; - __entry->hdr_len = hdr_len; - __entry->data_len = data_len; - memcpy(__get_dynamic_array(raw_hdr), hdr, hdr_len); - memcpy(__get_dynamic_array(raw_pkt), data, data_len); - ), - TP_printk( - "[%s] " SNOOP_PRN, - __get_str(dev), - __entry->slid, - __entry->dlid, - __entry->qpn, - __entry->opcode, - show_ib_opcode(__entry->opcode), - __entry->sl, - __entry->pkey, - __entry->hdr_len, - __entry->data_len - ) -); - #endif /* __HFI1_TRACE_RX_H */ #undef TRACE_INCLUDE_PATH From 26ea2544ddbe8855cb251e41ff3641c61655a15f Mon Sep 17 00:00:00 2001 From: Easwar Hariharan Date: Mon, 17 Oct 2016 04:19:58 -0700 Subject: [PATCH 652/792] IB/hfi1: Clean up unused argument hfi1_pcie_ddinit takes the PCI device id as an argument but never uses it. Clean it up. Reviewed-by: Dennis Dalessandro Signed-off-by: Easwar Hariharan Signed-off-by: Dennis Dalessandro Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/chip.c | 2 +- drivers/infiniband/hw/hfi1/hfi.h | 3 +-- drivers/infiniband/hw/hfi1/pcie.c | 3 +-- 3 files changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/infiniband/hw/hfi1/chip.c b/drivers/infiniband/hw/hfi1/chip.c index 859341a25e56..156ddf8f3dca 100644 --- a/drivers/infiniband/hw/hfi1/chip.c +++ b/drivers/infiniband/hw/hfi1/chip.c @@ -14449,7 +14449,7 @@ struct hfi1_devdata *hfi1_init_dd(struct pci_dev *pdev, * Any error printing is already done by the init code. * On return, we have the chip mapped. */ - ret = hfi1_pcie_ddinit(dd, pdev, ent); + ret = hfi1_pcie_ddinit(dd, pdev); if (ret < 0) goto bail_free; diff --git a/drivers/infiniband/hw/hfi1/hfi.h b/drivers/infiniband/hw/hfi1/hfi.h index 93e2fcebd083..d906cf08504f 100644 --- a/drivers/infiniband/hw/hfi1/hfi.h +++ b/drivers/infiniband/hw/hfi1/hfi.h @@ -1736,8 +1736,7 @@ int qsfp_dump(struct hfi1_pportdata *ppd, char *buf, int len); int hfi1_pcie_init(struct pci_dev *, const struct pci_device_id *); void hfi1_pcie_cleanup(struct pci_dev *); -int hfi1_pcie_ddinit(struct hfi1_devdata *, struct pci_dev *, - const struct pci_device_id *); +int hfi1_pcie_ddinit(struct hfi1_devdata *, struct pci_dev *); void hfi1_pcie_ddcleanup(struct hfi1_devdata *); void hfi1_pcie_flr(struct hfi1_devdata *); int pcie_speeds(struct hfi1_devdata *); diff --git a/drivers/infiniband/hw/hfi1/pcie.c b/drivers/infiniband/hw/hfi1/pcie.c index 89c68da1c273..4ac8f330c5cb 100644 --- a/drivers/infiniband/hw/hfi1/pcie.c +++ b/drivers/infiniband/hw/hfi1/pcie.c @@ -157,8 +157,7 @@ void hfi1_pcie_cleanup(struct pci_dev *pdev) * fields required to re-initialize after a chip reset, or for * various other purposes */ -int hfi1_pcie_ddinit(struct hfi1_devdata *dd, struct pci_dev *pdev, - const struct pci_device_id *ent) +int hfi1_pcie_ddinit(struct hfi1_devdata *dd, struct pci_dev *pdev) { unsigned long len; resource_size_t addr; From f0f98f74c91c68502e97e0d5526aa4e81b40b28a Mon Sep 17 00:00:00 2001 From: Easwar Hariharan Date: Mon, 17 Oct 2016 04:20:04 -0700 Subject: [PATCH 653/792] IB/hfi1: Delete unused lock The lock is an unused vestige from qib. Remove it. Reviewed-by: Mike Marciniszyn Signed-off-by: Easwar Hariharan Signed-off-by: Dennis Dalessandro Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/hfi.h | 2 -- drivers/infiniband/hw/hfi1/init.c | 1 - 2 files changed, 3 deletions(-) diff --git a/drivers/infiniband/hw/hfi1/hfi.h b/drivers/infiniband/hw/hfi1/hfi.h index d906cf08504f..cc87fd4e534b 100644 --- a/drivers/infiniband/hw/hfi1/hfi.h +++ b/drivers/infiniband/hw/hfi1/hfi.h @@ -593,8 +593,6 @@ struct hfi1_pportdata { struct mutex hls_lock; u32 host_link_state; - spinlock_t sdma_alllock ____cacheline_aligned_in_smp; - u32 lstate; /* logical link state */ /* these are the "32 bit" regs */ diff --git a/drivers/infiniband/hw/hfi1/init.c b/drivers/infiniband/hw/hfi1/init.c index e27b65dbe293..0f82eebc4b9e 100644 --- a/drivers/infiniband/hw/hfi1/init.c +++ b/drivers/infiniband/hw/hfi1/init.c @@ -507,7 +507,6 @@ void hfi1_init_pportdata(struct pci_dev *pdev, struct hfi1_pportdata *ppd, INIT_WORK(&ppd->qsfp_info.qsfp_work, qsfp_event); mutex_init(&ppd->hls_lock); - spin_lock_init(&ppd->sdma_alllock); spin_lock_init(&ppd->qsfp_info.qsfp_lock); ppd->qsfp_info.ppd = ppd; From 458ed666fe14a54dfb6690a1a7f541782d1342c9 Mon Sep 17 00:00:00 2001 From: Ira Weiny Date: Mon, 17 Oct 2016 04:20:09 -0700 Subject: [PATCH 654/792] IB/hfi1: Fix rnr_timer addition The new s_rnr_timeout was not properly being set and the code was incorrectly setting a different timer. Found by code inspection. Cc: # 4.7.x Fixes: 08279d5c9424 ("staging/rdma/hfi1: use new RNR timer") Reviewed-by: Mike Marciniszyn Signed-off-by: Ira Weiny Signed-off-by: Dennis Dalessandro Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/rc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/hfi1/rc.c b/drivers/infiniband/hw/hfi1/rc.c index 8bc5013f39a1..83198a8a8797 100644 --- a/drivers/infiniband/hw/hfi1/rc.c +++ b/drivers/infiniband/hw/hfi1/rc.c @@ -89,7 +89,7 @@ void hfi1_add_rnr_timer(struct rvt_qp *qp, u32 to) lockdep_assert_held(&qp->s_lock); qp->s_flags |= RVT_S_WAIT_RNR; - qp->s_timer.expires = jiffies + usecs_to_jiffies(to); + priv->s_rnr_timer.expires = jiffies + usecs_to_jiffies(to); add_timer(&priv->s_rnr_timer); } From 11501ab9df687c6f0852719a5165e16cd3eb3c10 Mon Sep 17 00:00:00 2001 From: Krzysztof Blaszkowski Date: Tue, 25 Oct 2016 13:12:11 -0700 Subject: [PATCH 655/792] IB/hfi1: Relocate rcvhdrcnt module parameter check. Validate the rcvhdrcnt module parameter in a single function at module load time. This allows proper error reporting. Reviewed-by: Dean Luick Signed-off-by: Krzysztof Blaszkowski Signed-off-by: Tymoteusz Kielan Signed-off-by: Dennis Dalessandro Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/init.c | 44 ++++++++++++++++++------------- 1 file changed, 26 insertions(+), 18 deletions(-) diff --git a/drivers/infiniband/hw/hfi1/init.c b/drivers/infiniband/hw/hfi1/init.c index 0f82eebc4b9e..e3b5bc93bc70 100644 --- a/drivers/infiniband/hw/hfi1/init.c +++ b/drivers/infiniband/hw/hfi1/init.c @@ -262,13 +262,6 @@ struct hfi1_ctxtdata *hfi1_create_ctxtdata(struct hfi1_pportdata *ppd, u32 ctxt, } rcd->eager_base = base * dd->rcv_entries.group_size; - /* Validate and initialize Rcv Hdr Q variables */ - if (rcvhdrcnt % HDRQ_INCREMENT) { - dd_dev_err(dd, - "ctxt%u: header queue count %d must be divisible by %lu\n", - rcd->ctxt, rcvhdrcnt, HDRQ_INCREMENT); - goto bail; - } rcd->rcvhdrq_cnt = rcvhdrcnt; rcd->rcvhdrqentsize = hfi1_hdrq_entsize; /* @@ -1399,6 +1392,29 @@ static void postinit_cleanup(struct hfi1_devdata *dd) hfi1_free_devdata(dd); } +static int init_validate_rcvhdrcnt(struct device *dev, uint thecnt) +{ + if (thecnt <= HFI1_MIN_HDRQ_EGRBUF_CNT) { + hfi1_early_err(dev, "Receive header queue count too small\n"); + return -EINVAL; + } + + if (thecnt > HFI1_MAX_HDRQ_EGRBUF_CNT) { + hfi1_early_err(dev, + "Receive header queue count cannot be greater than %u\n", + HFI1_MAX_HDRQ_EGRBUF_CNT); + return -EINVAL; + } + + if (thecnt % HDRQ_INCREMENT) { + hfi1_early_err(dev, "Receive header queue count %d must be divisible by %lu\n", + thecnt, HDRQ_INCREMENT); + return -EINVAL; + } + + return 0; +} + static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { int ret = 0, j, pidx, initfail; @@ -1409,18 +1425,10 @@ static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent) HFI1_CAP_LOCK(); /* Validate some global module parameters */ - if (rcvhdrcnt <= HFI1_MIN_HDRQ_EGRBUF_CNT) { - hfi1_early_err(&pdev->dev, "Header queue count too small\n"); - ret = -EINVAL; + ret = init_validate_rcvhdrcnt(&pdev->dev, rcvhdrcnt); + if (ret) goto bail; - } - if (rcvhdrcnt > HFI1_MAX_HDRQ_EGRBUF_CNT) { - hfi1_early_err(&pdev->dev, - "Receive header queue count cannot be greater than %u\n", - HFI1_MAX_HDRQ_EGRBUF_CNT); - ret = -EINVAL; - goto bail; - } + /* use the encoding function as a sanitization check */ if (!encode_rcv_header_entry_size(hfi1_hdrq_entsize)) { hfi1_early_err(&pdev->dev, "Invalid HdrQ Entry size %u\n", From 505efe3e46d5eaab726295cd023fb86d5b789d00 Mon Sep 17 00:00:00 2001 From: Jakub Pawlak Date: Tue, 25 Oct 2016 13:12:17 -0700 Subject: [PATCH 656/792] IB/hfi1: Fix status error code for unsupported packets Set the status code BAD_L2 when unsupported type of packet is received and dropped. Reviewed-by: Dennis Dalessandro Signed-off-by: Jakub Pawlak Signed-off-by: Dennis Dalessandro Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/chip.h | 3 +++ drivers/infiniband/hw/hfi1/driver.c | 17 +++++++++++++++-- 2 files changed, 18 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/hfi1/chip.h b/drivers/infiniband/hw/hfi1/chip.h index 92345259a8f4..043fd21dc5f3 100644 --- a/drivers/infiniband/hw/hfi1/chip.h +++ b/drivers/infiniband/hw/hfi1/chip.h @@ -320,6 +320,9 @@ /* DC_DC8051_CFG_MODE.GENERAL bits */ #define DISABLE_SELF_GUID_CHECK 0x2 +/* Bad L2 frame error code */ +#define BAD_L2_ERR 0x6 + /* * Eager buffer minimum and maximum sizes supported by the hardware. * All power-of-two sizes in between are supported as well. diff --git a/drivers/infiniband/hw/hfi1/driver.c b/drivers/infiniband/hw/hfi1/driver.c index 6563e4d38b80..dadd35eedc01 100644 --- a/drivers/infiniband/hw/hfi1/driver.c +++ b/drivers/infiniband/hw/hfi1/driver.c @@ -1360,12 +1360,25 @@ int process_receive_ib(struct hfi1_packet *packet) int process_receive_bypass(struct hfi1_packet *packet) { + struct hfi1_devdata *dd = packet->rcd->dd; + if (unlikely(rhf_err_flags(packet->rhf))) handle_eflags(packet); - dd_dev_err(packet->rcd->dd, + dd_dev_err(dd, "Bypass packets are not supported in normal operation. Dropping\n"); - incr_cntr64(&packet->rcd->dd->sw_rcv_bypass_packet_errors); + incr_cntr64(&dd->sw_rcv_bypass_packet_errors); + if (!(dd->err_info_rcvport.status_and_code & OPA_EI_STATUS_SMASK)) { + u64 *flits = packet->ebuf; + + if (flits && !(packet->rhf & RHF_LEN_ERR)) { + dd->err_info_rcvport.packet_flit1 = flits[0]; + dd->err_info_rcvport.packet_flit2 = + packet->tlen > sizeof(flits[0]) ? flits[1] : 0; + } + dd->err_info_rcvport.status_and_code |= + (OPA_EI_STATUS_SMASK | BAD_L2_ERR); + } return RHF_RCV_CONTINUE; } From f2d8a0b367e735ab157222ce74a5f2481216c878 Mon Sep 17 00:00:00 2001 From: Dasaratharaman Chandramouli Date: Tue, 25 Oct 2016 13:12:23 -0700 Subject: [PATCH 657/792] IB/hfi1: Fix ECN processing in prescan_rxq When processing ECN via the prescan_rxq path, some fields in the packet structure are passed uninitialized. This can potentially cause NULL pointer exceptions during ECN handling. Reviewed-by: Ira Weiny Reviewed-by: Dennis Dalessandro Signed-off-by: Dasaratharaman Chandramouli Signed-off-by: Dennis Dalessandro Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/driver.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) diff --git a/drivers/infiniband/hw/hfi1/driver.c b/drivers/infiniband/hw/hfi1/driver.c index dadd35eedc01..c5efff29c147 100644 --- a/drivers/infiniband/hw/hfi1/driver.c +++ b/drivers/infiniband/hw/hfi1/driver.c @@ -599,7 +599,6 @@ static void __prescan_rxq(struct hfi1_packet *packet) dd->rhf_offset; struct rvt_qp *qp; struct ib_header *hdr; - struct ib_other_headers *ohdr; struct rvt_dev_info *rdi = &dd->verbs_dev.rdi; u64 rhf = rhf_to_cpu(rhf_addr); u32 etype = rhf_rcv_type(rhf), qpn, bth1; @@ -615,18 +614,21 @@ static void __prescan_rxq(struct hfi1_packet *packet) if (etype != RHF_RCV_TYPE_IB) goto next; - hdr = hfi1_get_msgheader(dd, rhf_addr); + packet->hdr = hfi1_get_msgheader(dd, rhf_addr); + hdr = packet->hdr; lnh = be16_to_cpu(hdr->lrh[0]) & 3; - if (lnh == HFI1_LRH_BTH) - ohdr = &hdr->u.oth; - else if (lnh == HFI1_LRH_GRH) - ohdr = &hdr->u.l.oth; - else + if (lnh == HFI1_LRH_BTH) { + packet->ohdr = &hdr->u.oth; + } else if (lnh == HFI1_LRH_GRH) { + packet->ohdr = &hdr->u.l.oth; + packet->rcv_flags |= HFI1_HAS_GRH; + } else { goto next; /* just in case */ + } - bth1 = be32_to_cpu(ohdr->bth[1]); + bth1 = be32_to_cpu(packet->ohdr->bth[1]); is_ecn = !!(bth1 & (HFI1_FECN_SMASK | HFI1_BECN_SMASK)); if (!is_ecn) @@ -646,7 +648,7 @@ static void __prescan_rxq(struct hfi1_packet *packet) /* turn off BECN, FECN */ bth1 &= ~(HFI1_FECN_SMASK | HFI1_BECN_SMASK); - ohdr->bth[1] = cpu_to_be32(bth1); + packet->ohdr->bth[1] = cpu_to_be32(bth1); next: update_ps_mdata(&mdata, rcd); } From 09a7908b1ba616eed349d49058ee909907ee0885 Mon Sep 17 00:00:00 2001 From: Jianxin Xiong Date: Tue, 25 Oct 2016 13:12:40 -0700 Subject: [PATCH 658/792] IB/hfi1: Prevent hardware counter names from being cut off Increase the size of the buffer that is used to construct per-VL and per-SDMA counter names. Reviewed-by: Dennis Dalessandro Signed-off-by: Jianxin Xiong Signed-off-by: Dennis Dalessandro Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/chip.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/hfi1/chip.c b/drivers/infiniband/hw/hfi1/chip.c index 156ddf8f3dca..24d0820873cf 100644 --- a/drivers/infiniband/hw/hfi1/chip.c +++ b/drivers/infiniband/hw/hfi1/chip.c @@ -12098,7 +12098,7 @@ static void update_synth_timer(unsigned long opaque) mod_timer(&dd->synth_stats_timer, jiffies + HZ * SYNTH_CNT_TIME); } -#define C_MAX_NAME 13 /* 12 chars + one for /0 */ +#define C_MAX_NAME 16 /* 15 chars + one for /0 */ static int init_cntrs(struct hfi1_devdata *dd) { int i, rcv_ctxts, j; From 2b16056f845207967a32497f41cf92b57849f934 Mon Sep 17 00:00:00 2001 From: Dennis Dalessandro Date: Tue, 25 Oct 2016 13:12:46 -0700 Subject: [PATCH 659/792] IB/hfi1: Remove incorrect IS_ERR check Remove IS_ERR check from caching code as the function being called does not actually return error pointers. Fixes: f19bd643dbde: "IB/hfi1: Prevent NULL pointer deferences in caching code" Reported-by: Dan Carpenter Reviewed-by: Dean Luick Signed-off-by: Dennis Dalessandro Signed-off-by: Doug Ledford --- drivers/infiniband/hw/hfi1/user_sdma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/hfi1/user_sdma.c b/drivers/infiniband/hw/hfi1/user_sdma.c index a761f804111e..77697d690f3e 100644 --- a/drivers/infiniband/hw/hfi1/user_sdma.c +++ b/drivers/infiniband/hw/hfi1/user_sdma.c @@ -1144,7 +1144,7 @@ static int pin_vector_pages(struct user_sdma_request *req, rb_node = hfi1_mmu_rb_extract(pq->handler, (unsigned long)iovec->iov.iov_base, iovec->iov.iov_len); - if (rb_node && !IS_ERR(rb_node)) + if (rb_node) node = container_of(rb_node, struct sdma_mmu_node, rb); else rb_node = NULL; From 24803f38a5c0b6c57ed800b47e695f9ce474bc3a Mon Sep 17 00:00:00 2001 From: Hangbin Liu Date: Mon, 14 Nov 2016 16:16:28 +0800 Subject: [PATCH 660/792] igmp: do not remove igmp souce list info when set link down In commit 24cf3af3fed5 ("igmp: call ip_mc_clear_src..."), we forgot to remove igmpv3_clear_delrec() in ip_mc_down(), which also called ip_mc_clear_src(). This make us clear all IGMPv3 source filter info after NETDEV_DOWN. Move igmpv3_clear_delrec() to ip_mc_destroy_dev() and then no need ip_mc_clear_src() in ip_mc_destroy_dev(). On the other hand, we should restore back instead of free all source filter info in igmpv3_del_delrec(). Or we will not able to restore IGMPv3 source filter info after NETDEV_UP and NETDEV_POST_TYPE_CHANGE. Fixes: 24cf3af3fed5 ("igmp: call ip_mc_clear_src() only when ...") Signed-off-by: Hangbin Liu Signed-off-by: David S. Miller --- net/ipv4/igmp.c | 50 +++++++++++++++++++++++++++++++++++-------------- 1 file changed, 36 insertions(+), 14 deletions(-) diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c index 606cc3e85d2b..15db786d50ed 100644 --- a/net/ipv4/igmp.c +++ b/net/ipv4/igmp.c @@ -162,7 +162,7 @@ static int unsolicited_report_interval(struct in_device *in_dev) } static void igmpv3_add_delrec(struct in_device *in_dev, struct ip_mc_list *im); -static void igmpv3_del_delrec(struct in_device *in_dev, __be32 multiaddr); +static void igmpv3_del_delrec(struct in_device *in_dev, struct ip_mc_list *im); static void igmpv3_clear_delrec(struct in_device *in_dev); static int sf_setstate(struct ip_mc_list *pmc); static void sf_markstate(struct ip_mc_list *pmc); @@ -1130,10 +1130,15 @@ static void igmpv3_add_delrec(struct in_device *in_dev, struct ip_mc_list *im) spin_unlock_bh(&in_dev->mc_tomb_lock); } -static void igmpv3_del_delrec(struct in_device *in_dev, __be32 multiaddr) +/* + * restore ip_mc_list deleted records + */ +static void igmpv3_del_delrec(struct in_device *in_dev, struct ip_mc_list *im) { struct ip_mc_list *pmc, *pmc_prev; - struct ip_sf_list *psf, *psf_next; + struct ip_sf_list *psf; + struct net *net = dev_net(in_dev->dev); + __be32 multiaddr = im->multiaddr; spin_lock_bh(&in_dev->mc_tomb_lock); pmc_prev = NULL; @@ -1149,16 +1154,26 @@ static void igmpv3_del_delrec(struct in_device *in_dev, __be32 multiaddr) in_dev->mc_tomb = pmc->next; } spin_unlock_bh(&in_dev->mc_tomb_lock); + + spin_lock_bh(&im->lock); if (pmc) { - for (psf = pmc->tomb; psf; psf = psf_next) { - psf_next = psf->sf_next; - kfree(psf); + im->interface = pmc->interface; + im->crcount = in_dev->mr_qrv ?: net->ipv4.sysctl_igmp_qrv; + im->sfmode = pmc->sfmode; + if (pmc->sfmode == MCAST_INCLUDE) { + im->tomb = pmc->tomb; + im->sources = pmc->sources; + for (psf = im->sources; psf; psf = psf->sf_next) + psf->sf_crcount = im->crcount; } in_dev_put(pmc->interface); - kfree(pmc); } + spin_unlock_bh(&im->lock); } +/* + * flush ip_mc_list deleted records + */ static void igmpv3_clear_delrec(struct in_device *in_dev) { struct ip_mc_list *pmc, *nextpmc; @@ -1366,7 +1381,7 @@ void ip_mc_inc_group(struct in_device *in_dev, __be32 addr) ip_mc_hash_add(in_dev, im); #ifdef CONFIG_IP_MULTICAST - igmpv3_del_delrec(in_dev, im->multiaddr); + igmpv3_del_delrec(in_dev, im); #endif igmp_group_added(im); if (!in_dev->dead) @@ -1626,8 +1641,12 @@ void ip_mc_remap(struct in_device *in_dev) ASSERT_RTNL(); - for_each_pmc_rtnl(in_dev, pmc) + for_each_pmc_rtnl(in_dev, pmc) { +#ifdef CONFIG_IP_MULTICAST + igmpv3_del_delrec(in_dev, pmc); +#endif igmp_group_added(pmc); + } } /* Device going down */ @@ -1648,7 +1667,6 @@ void ip_mc_down(struct in_device *in_dev) in_dev->mr_gq_running = 0; if (del_timer(&in_dev->mr_gq_timer)) __in_dev_put(in_dev); - igmpv3_clear_delrec(in_dev); #endif ip_mc_dec_group(in_dev, IGMP_ALL_HOSTS); @@ -1688,8 +1706,12 @@ void ip_mc_up(struct in_device *in_dev) #endif ip_mc_inc_group(in_dev, IGMP_ALL_HOSTS); - for_each_pmc_rtnl(in_dev, pmc) + for_each_pmc_rtnl(in_dev, pmc) { +#ifdef CONFIG_IP_MULTICAST + igmpv3_del_delrec(in_dev, pmc); +#endif igmp_group_added(pmc); + } } /* @@ -1704,13 +1726,13 @@ void ip_mc_destroy_dev(struct in_device *in_dev) /* Deactivate timers */ ip_mc_down(in_dev); +#ifdef CONFIG_IP_MULTICAST + igmpv3_clear_delrec(in_dev); +#endif while ((i = rtnl_dereference(in_dev->mc_list)) != NULL) { in_dev->mc_list = i->next_rcu; in_dev->mc_count--; - - /* We've dropped the groups in ip_mc_down already */ - ip_mc_clear_src(i); ip_ma_put(i); } } From d2042052a0aa6a54f01a0c9e14243ec040b100e2 Mon Sep 17 00:00:00 2001 From: Giuseppe CAVALLARO Date: Mon, 14 Nov 2016 09:27:28 +0100 Subject: [PATCH 661/792] stmmac: update the PTP header file This patch is to update this file by using BIT macros, removing not used defines and fixes some typos. Signed-off-by: Giuseppe Cavallaro Acked-by: Rayagond Kokatanur Acked-by: Alexandre TORGUE Acked-by: Richard Cochran Signed-off-by: David S. Miller --- .../net/ethernet/stmicro/stmmac/stmmac_ptp.h | 72 ++++++++++--------- 1 file changed, 37 insertions(+), 35 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.h b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.h index 4535df37c227..c06938c47af5 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.h +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.h @@ -22,51 +22,53 @@ Author: Rayagond Kokatanur ******************************************************************************/ -#ifndef __STMMAC_PTP_H__ -#define __STMMAC_PTP_H__ +#ifndef __STMMAC_PTP_H__ +#define __STMMAC_PTP_H__ + +#define PTP_GMAC4_OFFSET 0xb00 +#define PTP_GMAC3_X_OFFSET 0x700 /* IEEE 1588 PTP register offsets */ -#define PTP_TCR 0x0700 /* Timestamp Control Reg */ -#define PTP_SSIR 0x0704 /* Sub-Second Increment Reg */ -#define PTP_STSR 0x0708 /* System Time – Seconds Regr */ -#define PTP_STNSR 0x070C /* System Time – Nanoseconds Reg */ -#define PTP_STSUR 0x0710 /* System Time – Seconds Update Reg */ -#define PTP_STNSUR 0x0714 /* System Time – Nanoseconds Update Reg */ -#define PTP_TAR 0x0718 /* Timestamp Addend Reg */ -#define PTP_TTSR 0x071C /* Target Time Seconds Reg */ -#define PTP_TTNSR 0x0720 /* Target Time Nanoseconds Reg */ -#define PTP_STHWSR 0x0724 /* System Time - Higher Word Seconds Reg */ -#define PTP_TSR 0x0728 /* Timestamp Status */ +#define PTP_TCR 0x00 /* Timestamp Control Reg */ +#define PTP_SSIR 0x04 /* Sub-Second Increment Reg */ +#define PTP_STSR 0x08 /* System Time – Seconds Regr */ +#define PTP_STNSR 0x0c /* System Time – Nanoseconds Reg */ +#define PTP_STSUR 0x10 /* System Time – Seconds Update Reg */ +#define PTP_STNSUR 0x14 /* System Time – Nanoseconds Update Reg */ +#define PTP_TAR 0x18 /* Timestamp Addend Reg */ -#define PTP_STNSUR_ADDSUB_SHIFT 31 - -/* PTP TCR defines */ -#define PTP_TCR_TSENA 0x00000001 /* Timestamp Enable */ -#define PTP_TCR_TSCFUPDT 0x00000002 /* Timestamp Fine/Coarse Update */ -#define PTP_TCR_TSINIT 0x00000004 /* Timestamp Initialize */ -#define PTP_TCR_TSUPDT 0x00000008 /* Timestamp Update */ -/* Timestamp Interrupt Trigger Enable */ -#define PTP_TCR_TSTRIG 0x00000010 -#define PTP_TCR_TSADDREG 0x00000020 /* Addend Reg Update */ -#define PTP_TCR_TSENALL 0x00000100 /* Enable Timestamp for All Frames */ -/* Timestamp Digital or Binary Rollover Control */ -#define PTP_TCR_TSCTRLSSR 0x00000200 +#define PTP_STNSUR_ADDSUB_SHIFT 31 +#define PTP_DIGITAL_ROLLOVER_MODE 0x3B9ACA00 /* 10e9-1 ns */ +#define PTP_BINARY_ROLLOVER_MODE 0x80000000 /* ~0.466 ns */ +/* PTP Timestamp control register defines */ +#define PTP_TCR_TSENA BIT(0) /* Timestamp Enable */ +#define PTP_TCR_TSCFUPDT BIT(1) /* Timestamp Fine/Coarse Update */ +#define PTP_TCR_TSINIT BIT(2) /* Timestamp Initialize */ +#define PTP_TCR_TSUPDT BIT(3) /* Timestamp Update */ +#define PTP_TCR_TSTRIG BIT(4) /* Timestamp Interrupt Trigger Enable */ +#define PTP_TCR_TSADDREG BIT(5) /* Addend Reg Update */ +#define PTP_TCR_TSENALL BIT(8) /* Enable Timestamp for All Frames */ +#define PTP_TCR_TSCTRLSSR BIT(9) /* Digital or Binary Rollover Control */ /* Enable PTP packet Processing for Version 2 Format */ -#define PTP_TCR_TSVER2ENA 0x00000400 +#define PTP_TCR_TSVER2ENA BIT(10) /* Enable Processing of PTP over Ethernet Frames */ -#define PTP_TCR_TSIPENA 0x00000800 +#define PTP_TCR_TSIPENA BIT(11) /* Enable Processing of PTP Frames Sent over IPv6-UDP */ -#define PTP_TCR_TSIPV6ENA 0x00001000 +#define PTP_TCR_TSIPV6ENA BIT(12) /* Enable Processing of PTP Frames Sent over IPv4-UDP */ -#define PTP_TCR_TSIPV4ENA 0x00002000 +#define PTP_TCR_TSIPV4ENA BIT(13) /* Enable Timestamp Snapshot for Event Messages */ -#define PTP_TCR_TSEVNTENA 0x00004000 +#define PTP_TCR_TSEVNTENA BIT(14) /* Enable Snapshot for Messages Relevant to Master */ -#define PTP_TCR_TSMSTRENA 0x00008000 +#define PTP_TCR_TSMSTRENA BIT(15) /* Select PTP packets for Taking Snapshots */ -#define PTP_TCR_SNAPTYPSEL_1 0x00010000 +#define PTP_TCR_SNAPTYPSEL_1 GENMASK(17, 16) /* Enable MAC address for PTP Frame Filtering */ -#define PTP_TCR_TSENMACADDR 0x00040000 +#define PTP_TCR_TSENMACADDR BIT(18) -#endif /* __STMMAC_PTP_H__ */ +/* SSIR defines */ +#define PTP_SSIR_SSINC_MASK 0xff +#define GMAC4_PTP_SSIR_SSINC_SHIFT 16 + +#endif /* __STMMAC_PTP_H__ */ From ba1ffd74df74a9efa5290f87632a0ed55f1aa387 Mon Sep 17 00:00:00 2001 From: Giuseppe CAVALLARO Date: Mon, 14 Nov 2016 09:27:29 +0100 Subject: [PATCH 662/792] stmmac: fix PTP support for GMAC4 Due to bad management of the descriptors, when use ptp4l, kernel panics as shown below: ----------------------------------------------------------- Unable to handle kernel NULL pointer dereference at virtual address 000001ac ... Internal error: Oops: 17 [#1] SMP ARM ... Hardware name: STi SoC with Flattened Device Tree task: c0c05e80 task.stack: c0c00000 PC is at dwmac4_wrback_get_tx_timestamp_status+0x0/0xc LR is at stmmac_tx_clean+0x2f8/0x4d4 ----------------------------------------------------------- In case of GMAC4 the extended descriptor pointers were used for getting the timestamp. These are NULL for this HW, and the normal ones must be used. The PTP also had problems on this chip due to the bad register management and issues on the algo adopted to setup the PTP and getting the timestamp values from the descriptors. Signed-off-by: Giuseppe Cavallaro Acked-by: Rayagond Kokatanur Acked-by: Alexandre TORGUE Acked-by: Richard Cochran Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/common.h | 5 +- .../ethernet/stmicro/stmmac/dwmac4_descs.c | 68 ++++++++++--- .../ethernet/stmicro/stmmac/dwmac4_descs.h | 4 + drivers/net/ethernet/stmicro/stmmac/stmmac.h | 1 + .../ethernet/stmicro/stmmac/stmmac_hwtstamp.c | 43 ++++++-- .../net/ethernet/stmicro/stmmac/stmmac_main.c | 97 ++++++++++--------- .../net/ethernet/stmicro/stmmac/stmmac_ptp.c | 9 +- 7 files changed, 154 insertions(+), 73 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h index d3292c4a6eda..6fc214ce2958 100644 --- a/drivers/net/ethernet/stmicro/stmmac/common.h +++ b/drivers/net/ethernet/stmicro/stmmac/common.h @@ -482,11 +482,12 @@ struct stmmac_ops { /* PTP and HW Timer helpers */ struct stmmac_hwtimestamp { void (*config_hw_tstamping) (void __iomem *ioaddr, u32 data); - u32 (*config_sub_second_increment) (void __iomem *ioaddr, u32 clk_rate); + u32 (*config_sub_second_increment)(void __iomem *ioaddr, u32 ptp_clock, + int gmac4); int (*init_systime) (void __iomem *ioaddr, u32 sec, u32 nsec); int (*config_addend) (void __iomem *ioaddr, u32 addend); int (*adjust_systime) (void __iomem *ioaddr, u32 sec, u32 nsec, - int add_sub); + int add_sub, int gmac4); u64(*get_systime) (void __iomem *ioaddr); }; diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c index a1b17cd7886b..2ef2f0c03e76 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c @@ -204,14 +204,18 @@ static void dwmac4_rd_enable_tx_timestamp(struct dma_desc *p) static int dwmac4_wrback_get_tx_timestamp_status(struct dma_desc *p) { - return (p->des3 & TDES3_TIMESTAMP_STATUS) - >> TDES3_TIMESTAMP_STATUS_SHIFT; + /* Context type from W/B descriptor must be zero */ + if (p->des3 & TDES3_CONTEXT_TYPE) + return -EINVAL; + + /* Tx Timestamp Status is 1 so des0 and des1'll have valid values */ + if (p->des3 & TDES3_TIMESTAMP_STATUS) + return 0; + + return 1; } -/* NOTE: For RX CTX bit has to be checked before - * HAVE a specific function for TX and another one for RX - */ -static u64 dwmac4_wrback_get_timestamp(void *desc, u32 ats) +static inline u64 dwmac4_get_timestamp(void *desc, u32 ats) { struct dma_desc *p = (struct dma_desc *)desc; u64 ns; @@ -223,12 +227,54 @@ static u64 dwmac4_wrback_get_timestamp(void *desc, u32 ats) return ns; } -static int dwmac4_context_get_rx_timestamp_status(void *desc, u32 ats) +static int dwmac4_rx_check_timestamp(void *desc) { struct dma_desc *p = (struct dma_desc *)desc; + u32 own, ctxt; + int ret = 1; - return (p->des1 & RDES1_TIMESTAMP_AVAILABLE) - >> RDES1_TIMESTAMP_AVAILABLE_SHIFT; + own = p->des3 & RDES3_OWN; + ctxt = ((p->des3 & RDES3_CONTEXT_DESCRIPTOR) + >> RDES3_CONTEXT_DESCRIPTOR_SHIFT); + + if (likely(!own && ctxt)) { + if ((p->des0 == 0xffffffff) && (p->des1 == 0xffffffff)) + /* Corrupted value */ + ret = -EINVAL; + else + /* A valid Timestamp is ready to be read */ + ret = 0; + } + + /* Timestamp not ready */ + return ret; +} + +static int dwmac4_wrback_get_rx_timestamp_status(void *desc, u32 ats) +{ + struct dma_desc *p = (struct dma_desc *)desc; + int ret = -EINVAL; + + /* Get the status from normal w/b descriptor */ + if (likely(p->des3 & TDES3_RS1V)) { + if (likely(p->des1 & RDES1_TIMESTAMP_AVAILABLE)) { + int i = 0; + + /* Check if timestamp is OK from context descriptor */ + do { + ret = dwmac4_rx_check_timestamp(desc); + if (ret < 0) + goto exit; + i++; + + } while ((ret == 1) || (i < 10)); + + if (i == 10) + ret = -EBUSY; + } + } +exit: + return ret; } static void dwmac4_rd_init_rx_desc(struct dma_desc *p, int disable_rx_ic, @@ -373,8 +419,8 @@ const struct stmmac_desc_ops dwmac4_desc_ops = { .get_rx_frame_len = dwmac4_wrback_get_rx_frame_len, .enable_tx_timestamp = dwmac4_rd_enable_tx_timestamp, .get_tx_timestamp_status = dwmac4_wrback_get_tx_timestamp_status, - .get_timestamp = dwmac4_wrback_get_timestamp, - .get_rx_timestamp_status = dwmac4_context_get_rx_timestamp_status, + .get_rx_timestamp_status = dwmac4_wrback_get_rx_timestamp_status, + .get_timestamp = dwmac4_get_timestamp, .set_tx_ic = dwmac4_rd_set_tx_ic, .prepare_tx_desc = dwmac4_rd_prepare_tx_desc, .prepare_tso_tx_desc = dwmac4_rd_prepare_tso_tx_desc, diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.h b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.h index 0902a2edeaa9..9736c505211a 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.h +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.h @@ -59,10 +59,13 @@ #define TDES3_CTXT_TCMSSV BIT(26) /* TDES3 Common */ +#define TDES3_RS1V BIT(26) +#define TDES3_RS1V_SHIFT 26 #define TDES3_LAST_DESCRIPTOR BIT(28) #define TDES3_LAST_DESCRIPTOR_SHIFT 28 #define TDES3_FIRST_DESCRIPTOR BIT(29) #define TDES3_CONTEXT_TYPE BIT(30) +#define TDES3_CONTEXT_TYPE_SHIFT 30 /* TDS3 use for both format (read and write back) */ #define TDES3_OWN BIT(31) @@ -117,6 +120,7 @@ #define RDES3_LAST_DESCRIPTOR BIT(28) #define RDES3_FIRST_DESCRIPTOR BIT(29) #define RDES3_CONTEXT_DESCRIPTOR BIT(30) +#define RDES3_CONTEXT_DESCRIPTOR_SHIFT 30 /* RDES3 (read format) */ #define RDES3_BUFFER1_VALID_ADDR BIT(24) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h index b15fc55f1b96..4d2a759b8465 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h @@ -129,6 +129,7 @@ struct stmmac_priv { int irq_wake; spinlock_t ptp_lock; void __iomem *mmcaddr; + void __iomem *ptpaddr; u32 rx_tail_addr; u32 tx_tail_addr; u32 mss; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c index a77f68918010..10d6059b2f26 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c @@ -34,21 +34,29 @@ static void stmmac_config_hw_tstamping(void __iomem *ioaddr, u32 data) } static u32 stmmac_config_sub_second_increment(void __iomem *ioaddr, - u32 ptp_clock) + u32 ptp_clock, int gmac4) { u32 value = readl(ioaddr + PTP_TCR); unsigned long data; - /* Convert the ptp_clock to nano second - * formula = (2/ptp_clock) * 1000000000 - * where, ptp_clock = 50MHz. + /* For GMAC3.x, 4.x versions, convert the ptp_clock to nano second + * formula = (1/ptp_clock) * 1000000000 + * where ptp_clock is 50MHz if fine method is used to update system */ - data = (2000000000ULL / ptp_clock); + if (value & PTP_TCR_TSCFUPDT) + data = (1000000000ULL / 50000000); + else + data = (1000000000ULL / ptp_clock); /* 0.465ns accuracy */ if (!(value & PTP_TCR_TSCTRLSSR)) data = (data * 1000) / 465; + data &= PTP_SSIR_SSINC_MASK; + + if (gmac4) + data = data << GMAC4_PTP_SSIR_SSINC_SHIFT; + writel(data, ioaddr + PTP_SSIR); return data; @@ -104,14 +112,30 @@ static int stmmac_config_addend(void __iomem *ioaddr, u32 addend) } static int stmmac_adjust_systime(void __iomem *ioaddr, u32 sec, u32 nsec, - int add_sub) + int add_sub, int gmac4) { u32 value; int limit; + if (add_sub) { + /* If the new sec value needs to be subtracted with + * the system time, then MAC_STSUR reg should be + * programmed with (2^32 – ) + */ + if (gmac4) + sec = (100000000ULL - sec); + + value = readl(ioaddr + PTP_TCR); + if (value & PTP_TCR_TSCTRLSSR) + nsec = (PTP_DIGITAL_ROLLOVER_MODE - nsec); + else + nsec = (PTP_BINARY_ROLLOVER_MODE - nsec); + } + writel(sec, ioaddr + PTP_STSUR); - writel(((add_sub << PTP_STNSUR_ADDSUB_SHIFT) | nsec), - ioaddr + PTP_STNSUR); + value = (add_sub << PTP_STNSUR_ADDSUB_SHIFT) | nsec; + writel(value, ioaddr + PTP_STNSUR); + /* issue command to initialize the system time value */ value = readl(ioaddr + PTP_TCR); value |= PTP_TCR_TSUPDT; @@ -134,8 +158,9 @@ static u64 stmmac_get_systime(void __iomem *ioaddr) { u64 ns; + /* Get the TSSS value */ ns = readl(ioaddr + PTP_STNSR); - /* convert sec time value to nanosecond */ + /* Get the TSS and convert sec time value to nanosecond */ ns += readl(ioaddr + PTP_STSR) * 1000000000ULL; return ns; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index e2c94ec4edd0..1f9ec02fa7f8 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -340,18 +340,17 @@ out: /* stmmac_get_tx_hwtstamp - get HW TX timestamps * @priv: driver private structure - * @entry : descriptor index to be used. + * @p : descriptor pointer * @skb : the socket buffer * Description : * This function will read timestamp from the descriptor & pass it to stack. * and also perform some sanity checks. */ static void stmmac_get_tx_hwtstamp(struct stmmac_priv *priv, - unsigned int entry, struct sk_buff *skb) + struct dma_desc *p, struct sk_buff *skb) { struct skb_shared_hwtstamps shhwtstamp; u64 ns; - void *desc = NULL; if (!priv->hwts_tx_en) return; @@ -360,58 +359,55 @@ static void stmmac_get_tx_hwtstamp(struct stmmac_priv *priv, if (likely(!skb || !(skb_shinfo(skb)->tx_flags & SKBTX_IN_PROGRESS))) return; - if (priv->adv_ts) - desc = (priv->dma_etx + entry); - else - desc = (priv->dma_tx + entry); - /* check tx tstamp status */ - if (!priv->hw->desc->get_tx_timestamp_status((struct dma_desc *)desc)) - return; + if (!priv->hw->desc->get_tx_timestamp_status(p)) { + /* get the valid tstamp */ + ns = priv->hw->desc->get_timestamp(p, priv->adv_ts); - /* get the valid tstamp */ - ns = priv->hw->desc->get_timestamp(desc, priv->adv_ts); + memset(&shhwtstamp, 0, sizeof(struct skb_shared_hwtstamps)); + shhwtstamp.hwtstamp = ns_to_ktime(ns); - memset(&shhwtstamp, 0, sizeof(struct skb_shared_hwtstamps)); - shhwtstamp.hwtstamp = ns_to_ktime(ns); - /* pass tstamp to stack */ - skb_tstamp_tx(skb, &shhwtstamp); + netdev_info(priv->dev, "get valid TX hw timestamp %llu\n", ns); + /* pass tstamp to stack */ + skb_tstamp_tx(skb, &shhwtstamp); + } return; } /* stmmac_get_rx_hwtstamp - get HW RX timestamps * @priv: driver private structure - * @entry : descriptor index to be used. + * @p : descriptor pointer + * @np : next descriptor pointer * @skb : the socket buffer * Description : * This function will read received packet's timestamp from the descriptor * and pass it to stack. It also perform some sanity checks. */ -static void stmmac_get_rx_hwtstamp(struct stmmac_priv *priv, - unsigned int entry, struct sk_buff *skb) +static void stmmac_get_rx_hwtstamp(struct stmmac_priv *priv, struct dma_desc *p, + struct dma_desc *np, struct sk_buff *skb) { struct skb_shared_hwtstamps *shhwtstamp = NULL; u64 ns; - void *desc = NULL; if (!priv->hwts_rx_en) return; - if (priv->adv_ts) - desc = (priv->dma_erx + entry); - else - desc = (priv->dma_rx + entry); + /* Check if timestamp is available */ + if (!priv->hw->desc->get_rx_timestamp_status(p, priv->adv_ts)) { + /* For GMAC4, the valid timestamp is from CTX next desc. */ + if (priv->plat->has_gmac4) + ns = priv->hw->desc->get_timestamp(np, priv->adv_ts); + else + ns = priv->hw->desc->get_timestamp(p, priv->adv_ts); - /* exit if rx tstamp is not valid */ - if (!priv->hw->desc->get_rx_timestamp_status(desc, priv->adv_ts)) - return; - - /* get valid tstamp */ - ns = priv->hw->desc->get_timestamp(desc, priv->adv_ts); - shhwtstamp = skb_hwtstamps(skb); - memset(shhwtstamp, 0, sizeof(struct skb_shared_hwtstamps)); - shhwtstamp->hwtstamp = ns_to_ktime(ns); + netdev_info(priv->dev, "get valid RX hw timestamp %llu\n", ns); + shhwtstamp = skb_hwtstamps(skb); + memset(shhwtstamp, 0, sizeof(struct skb_shared_hwtstamps)); + shhwtstamp->hwtstamp = ns_to_ktime(ns); + } else { + netdev_err(priv->dev, "cannot get RX hw timestamp\n"); + } } /** @@ -598,17 +594,18 @@ static int stmmac_hwtstamp_ioctl(struct net_device *dev, struct ifreq *ifr) priv->hwts_tx_en = config.tx_type == HWTSTAMP_TX_ON; if (!priv->hwts_tx_en && !priv->hwts_rx_en) - priv->hw->ptp->config_hw_tstamping(priv->ioaddr, 0); + priv->hw->ptp->config_hw_tstamping(priv->ptpaddr, 0); else { value = (PTP_TCR_TSENA | PTP_TCR_TSCFUPDT | PTP_TCR_TSCTRLSSR | tstamp_all | ptp_v2 | ptp_over_ethernet | ptp_over_ipv6_udp | ptp_over_ipv4_udp | ts_event_en | ts_master_en | snap_type_sel); - priv->hw->ptp->config_hw_tstamping(priv->ioaddr, value); + priv->hw->ptp->config_hw_tstamping(priv->ptpaddr, value); /* program Sub Second Increment reg */ sec_inc = priv->hw->ptp->config_sub_second_increment( - priv->ioaddr, priv->clk_ptp_rate); + priv->ptpaddr, priv->clk_ptp_rate, + priv->plat->has_gmac4); temp = div_u64(1000000000ULL, sec_inc); /* calculate default added value: @@ -618,14 +615,14 @@ static int stmmac_hwtstamp_ioctl(struct net_device *dev, struct ifreq *ifr) */ temp = (u64)(temp << 32); priv->default_addend = div_u64(temp, priv->clk_ptp_rate); - priv->hw->ptp->config_addend(priv->ioaddr, + priv->hw->ptp->config_addend(priv->ptpaddr, priv->default_addend); /* initialize system time */ ktime_get_real_ts64(&now); /* lower 32 bits of tv_sec are safe until y2106 */ - priv->hw->ptp->init_systime(priv->ioaddr, (u32)now.tv_sec, + priv->hw->ptp->init_systime(priv->ptpaddr, (u32)now.tv_sec, now.tv_nsec); } @@ -1340,7 +1337,7 @@ static void stmmac_tx_clean(struct stmmac_priv *priv) priv->dev->stats.tx_packets++; priv->xstats.tx_pkt_n++; } - stmmac_get_tx_hwtstamp(priv, entry, skb); + stmmac_get_tx_hwtstamp(priv, p, skb); } if (likely(priv->tx_skbuff_dma[entry].buf)) { @@ -1486,10 +1483,13 @@ static void stmmac_mmc_setup(struct stmmac_priv *priv) unsigned int mode = MMC_CNTRL_RESET_ON_READ | MMC_CNTRL_COUNTER_RESET | MMC_CNTRL_PRESET | MMC_CNTRL_FULL_HALF_PRESET; - if (priv->synopsys_id >= DWMAC_CORE_4_00) + if (priv->synopsys_id >= DWMAC_CORE_4_00) { + priv->ptpaddr = priv->ioaddr + PTP_GMAC4_OFFSET; priv->mmcaddr = priv->ioaddr + MMC_GMAC4_OFFSET; - else + } else { + priv->ptpaddr = priv->ioaddr + PTP_GMAC3_X_OFFSET; priv->mmcaddr = priv->ioaddr + MMC_GMAC3_X_OFFSET; + } dwmac_mmc_intr_all_mask(priv->mmcaddr); @@ -2484,7 +2484,7 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit) if (netif_msg_rx_status(priv)) { void *rx_head; - pr_debug("%s: descriptor ring:\n", __func__); + pr_info(">>>>>> %s: descriptor ring:\n", __func__); if (priv->extend_desc) rx_head = (void *)priv->dma_erx; else @@ -2495,6 +2495,7 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit) while (count < limit) { int status; struct dma_desc *p; + struct dma_desc *np; if (priv->extend_desc) p = (struct dma_desc *)(priv->dma_erx + entry); @@ -2514,9 +2515,11 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit) next_entry = priv->cur_rx; if (priv->extend_desc) - prefetch(priv->dma_erx + next_entry); + np = (struct dma_desc *)(priv->dma_erx + next_entry); else - prefetch(priv->dma_rx + next_entry); + np = priv->dma_rx + next_entry; + + prefetch(np); if ((priv->extend_desc) && (priv->hw->desc->rx_extended_status)) priv->hw->desc->rx_extended_status(&priv->dev->stats, @@ -2568,7 +2571,7 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit) frame_len -= ETH_FCS_LEN; if (netif_msg_rx_status(priv)) { - pr_debug("\tdesc: %p [entry %d] buff=0x%x\n", + pr_info("\tdesc: %p [entry %d] buff=0x%x\n", p, entry, des); if (frame_len > ETH_FRAME_LEN) pr_debug("\tframe size %d, COE: %d\n", @@ -2625,13 +2628,13 @@ static int stmmac_rx(struct stmmac_priv *priv, int limit) DMA_FROM_DEVICE); } - stmmac_get_rx_hwtstamp(priv, entry, skb); - if (netif_msg_pktdata(priv)) { pr_debug("frame received (%dbytes)", frame_len); print_pkt(skb->data, frame_len); } + stmmac_get_rx_hwtstamp(priv, p, np, skb); + stmmac_rx_vlan(priv->dev, skb); skb->protocol = eth_type_trans(skb, priv->dev); diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c index 1477471f8d44..3eb281d1db08 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ptp.c @@ -54,7 +54,7 @@ static int stmmac_adjust_freq(struct ptp_clock_info *ptp, s32 ppb) spin_lock_irqsave(&priv->ptp_lock, flags); - priv->hw->ptp->config_addend(priv->ioaddr, addend); + priv->hw->ptp->config_addend(priv->ptpaddr, addend); spin_unlock_irqrestore(&priv->ptp_lock, flags); @@ -89,7 +89,8 @@ static int stmmac_adjust_time(struct ptp_clock_info *ptp, s64 delta) spin_lock_irqsave(&priv->ptp_lock, flags); - priv->hw->ptp->adjust_systime(priv->ioaddr, sec, nsec, neg_adj); + priv->hw->ptp->adjust_systime(priv->ptpaddr, sec, nsec, neg_adj, + priv->plat->has_gmac4); spin_unlock_irqrestore(&priv->ptp_lock, flags); @@ -114,7 +115,7 @@ static int stmmac_get_time(struct ptp_clock_info *ptp, struct timespec64 *ts) spin_lock_irqsave(&priv->ptp_lock, flags); - ns = priv->hw->ptp->get_systime(priv->ioaddr); + ns = priv->hw->ptp->get_systime(priv->ptpaddr); spin_unlock_irqrestore(&priv->ptp_lock, flags); @@ -141,7 +142,7 @@ static int stmmac_set_time(struct ptp_clock_info *ptp, spin_lock_irqsave(&priv->ptp_lock, flags); - priv->hw->ptp->init_systime(priv->ioaddr, ts->tv_sec, ts->tv_nsec); + priv->hw->ptp->init_systime(priv->ptpaddr, ts->tv_sec, ts->tv_nsec); spin_unlock_irqrestore(&priv->ptp_lock, flags); From ee112c12ebd22baca85812175008ef584250e415 Mon Sep 17 00:00:00 2001 From: Giuseppe CAVALLARO Date: Mon, 14 Nov 2016 09:27:30 +0100 Subject: [PATCH 663/792] stmmac: fix PTP type ethtool stats This patch fixes the ethtool stats for PTP frames; previous version does not take care about some message types: i.e. announce, management and signaling. It also provided a broken statistic in case of "No PTP message received". Signed-off-by: Giuseppe Cavallaro Acked-by: Rayagond Kokatanur Acked-by: Alexandre TORGUE Acked-by: Richard Cochran Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/common.h | 19 +++++++------ drivers/net/ethernet/stmicro/stmmac/descs.h | 20 +++++++------ .../ethernet/stmicro/stmmac/dwmac4_descs.c | 27 +++++++++++------- .../net/ethernet/stmicro/stmmac/enh_desc.c | 28 ++++++++++++------- .../ethernet/stmicro/stmmac/stmmac_ethtool.c | 19 +++++++------ 5 files changed, 69 insertions(+), 44 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h index 6fc214ce2958..6d2de4e01f6d 100644 --- a/drivers/net/ethernet/stmicro/stmmac/common.h +++ b/drivers/net/ethernet/stmicro/stmmac/common.h @@ -120,14 +120,17 @@ struct stmmac_extra_stats { unsigned long ip_csum_bypassed; unsigned long ipv4_pkt_rcvd; unsigned long ipv6_pkt_rcvd; - unsigned long rx_msg_type_ext_no_ptp; - unsigned long rx_msg_type_sync; - unsigned long rx_msg_type_follow_up; - unsigned long rx_msg_type_delay_req; - unsigned long rx_msg_type_delay_resp; - unsigned long rx_msg_type_pdelay_req; - unsigned long rx_msg_type_pdelay_resp; - unsigned long rx_msg_type_pdelay_follow_up; + unsigned long no_ptp_rx_msg_type_ext; + unsigned long ptp_rx_msg_type_sync; + unsigned long ptp_rx_msg_type_follow_up; + unsigned long ptp_rx_msg_type_delay_req; + unsigned long ptp_rx_msg_type_delay_resp; + unsigned long ptp_rx_msg_type_pdelay_req; + unsigned long ptp_rx_msg_type_pdelay_resp; + unsigned long ptp_rx_msg_type_pdelay_follow_up; + unsigned long ptp_rx_msg_type_announce; + unsigned long ptp_rx_msg_type_management; + unsigned long ptp_rx_msg_pkt_reserved_type; unsigned long ptp_frame_type; unsigned long ptp_ver; unsigned long timestamp_dropped; diff --git a/drivers/net/ethernet/stmicro/stmmac/descs.h b/drivers/net/ethernet/stmicro/stmmac/descs.h index 2e4c171a2b41..e3c86d422109 100644 --- a/drivers/net/ethernet/stmicro/stmmac/descs.h +++ b/drivers/net/ethernet/stmicro/stmmac/descs.h @@ -155,14 +155,18 @@ #define ERDES4_L3_L4_FILT_NO_MATCH_MASK GENMASK(27, 26) /* Extended RDES4 message type definitions */ -#define RDES_EXT_NO_PTP 0 -#define RDES_EXT_SYNC 1 -#define RDES_EXT_FOLLOW_UP 2 -#define RDES_EXT_DELAY_REQ 3 -#define RDES_EXT_DELAY_RESP 4 -#define RDES_EXT_PDELAY_REQ 5 -#define RDES_EXT_PDELAY_RESP 6 -#define RDES_EXT_PDELAY_FOLLOW_UP 7 +#define RDES_EXT_NO_PTP 0x0 +#define RDES_EXT_SYNC 0x1 +#define RDES_EXT_FOLLOW_UP 0x2 +#define RDES_EXT_DELAY_REQ 0x3 +#define RDES_EXT_DELAY_RESP 0x4 +#define RDES_EXT_PDELAY_REQ 0x5 +#define RDES_EXT_PDELAY_RESP 0x6 +#define RDES_EXT_PDELAY_FOLLOW_UP 0x7 +#define RDES_PTP_ANNOUNCE 0x8 +#define RDES_PTP_MANAGEMENT 0x9 +#define RDES_PTP_SIGNALING 0xa +#define RDES_PTP_PKT_RESERVED_TYPE 0xf /* Basic descriptor structure for normal and alternate descriptors */ struct dma_desc { diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c index 2ef2f0c03e76..a601f8d43b75 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c @@ -123,22 +123,29 @@ static int dwmac4_wrback_get_rx_status(void *data, struct stmmac_extra_stats *x, x->ipv4_pkt_rcvd++; if (rdes1 & RDES1_IPV6_HEADER) x->ipv6_pkt_rcvd++; - if (message_type == RDES_EXT_SYNC) - x->rx_msg_type_sync++; + + if (message_type == RDES_EXT_NO_PTP) + x->no_ptp_rx_msg_type_ext++; + else if (message_type == RDES_EXT_SYNC) + x->ptp_rx_msg_type_sync++; else if (message_type == RDES_EXT_FOLLOW_UP) - x->rx_msg_type_follow_up++; + x->ptp_rx_msg_type_follow_up++; else if (message_type == RDES_EXT_DELAY_REQ) - x->rx_msg_type_delay_req++; + x->ptp_rx_msg_type_delay_req++; else if (message_type == RDES_EXT_DELAY_RESP) - x->rx_msg_type_delay_resp++; + x->ptp_rx_msg_type_delay_resp++; else if (message_type == RDES_EXT_PDELAY_REQ) - x->rx_msg_type_pdelay_req++; + x->ptp_rx_msg_type_pdelay_req++; else if (message_type == RDES_EXT_PDELAY_RESP) - x->rx_msg_type_pdelay_resp++; + x->ptp_rx_msg_type_pdelay_resp++; else if (message_type == RDES_EXT_PDELAY_FOLLOW_UP) - x->rx_msg_type_pdelay_follow_up++; - else - x->rx_msg_type_ext_no_ptp++; + x->ptp_rx_msg_type_pdelay_follow_up++; + else if (message_type == RDES_PTP_ANNOUNCE) + x->ptp_rx_msg_type_announce++; + else if (message_type == RDES_PTP_MANAGEMENT) + x->ptp_rx_msg_type_management++; + else if (message_type == RDES_PTP_PKT_RESERVED_TYPE) + x->ptp_rx_msg_pkt_reserved_type++; if (rdes1 & RDES1_PTP_PACKET_TYPE) x->ptp_frame_type++; diff --git a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c index 38f19c99cf59..e75549327c34 100644 --- a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c +++ b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c @@ -150,22 +150,30 @@ static void enh_desc_get_ext_status(void *data, struct stmmac_extra_stats *x, x->ipv4_pkt_rcvd++; if (rdes4 & ERDES4_IPV6_PKT_RCVD) x->ipv6_pkt_rcvd++; - if (message_type == RDES_EXT_SYNC) - x->rx_msg_type_sync++; + + if (message_type == RDES_EXT_NO_PTP) + x->no_ptp_rx_msg_type_ext++; + else if (message_type == RDES_EXT_SYNC) + x->ptp_rx_msg_type_sync++; else if (message_type == RDES_EXT_FOLLOW_UP) - x->rx_msg_type_follow_up++; + x->ptp_rx_msg_type_follow_up++; else if (message_type == RDES_EXT_DELAY_REQ) - x->rx_msg_type_delay_req++; + x->ptp_rx_msg_type_delay_req++; else if (message_type == RDES_EXT_DELAY_RESP) - x->rx_msg_type_delay_resp++; + x->ptp_rx_msg_type_delay_resp++; else if (message_type == RDES_EXT_PDELAY_REQ) - x->rx_msg_type_pdelay_req++; + x->ptp_rx_msg_type_pdelay_req++; else if (message_type == RDES_EXT_PDELAY_RESP) - x->rx_msg_type_pdelay_resp++; + x->ptp_rx_msg_type_pdelay_resp++; else if (message_type == RDES_EXT_PDELAY_FOLLOW_UP) - x->rx_msg_type_pdelay_follow_up++; - else - x->rx_msg_type_ext_no_ptp++; + x->ptp_rx_msg_type_pdelay_follow_up++; + else if (message_type == RDES_PTP_ANNOUNCE) + x->ptp_rx_msg_type_announce++; + else if (message_type == RDES_PTP_MANAGEMENT) + x->ptp_rx_msg_type_management++; + else if (message_type == RDES_PTP_PKT_RESERVED_TYPE) + x->ptp_rx_msg_pkt_reserved_type++; + if (rdes4 & ERDES4_PTP_FRAME_TYPE) x->ptp_frame_type++; if (rdes4 & ERDES4_PTP_VER) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c index 1e06173fc9d7..c5d0142adda2 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c @@ -115,14 +115,17 @@ static const struct stmmac_stats stmmac_gstrings_stats[] = { STMMAC_STAT(ip_csum_bypassed), STMMAC_STAT(ipv4_pkt_rcvd), STMMAC_STAT(ipv6_pkt_rcvd), - STMMAC_STAT(rx_msg_type_ext_no_ptp), - STMMAC_STAT(rx_msg_type_sync), - STMMAC_STAT(rx_msg_type_follow_up), - STMMAC_STAT(rx_msg_type_delay_req), - STMMAC_STAT(rx_msg_type_delay_resp), - STMMAC_STAT(rx_msg_type_pdelay_req), - STMMAC_STAT(rx_msg_type_pdelay_resp), - STMMAC_STAT(rx_msg_type_pdelay_follow_up), + STMMAC_STAT(no_ptp_rx_msg_type_ext), + STMMAC_STAT(ptp_rx_msg_type_sync), + STMMAC_STAT(ptp_rx_msg_type_follow_up), + STMMAC_STAT(ptp_rx_msg_type_delay_req), + STMMAC_STAT(ptp_rx_msg_type_delay_resp), + STMMAC_STAT(ptp_rx_msg_type_pdelay_req), + STMMAC_STAT(ptp_rx_msg_type_pdelay_resp), + STMMAC_STAT(ptp_rx_msg_type_pdelay_follow_up), + STMMAC_STAT(ptp_rx_msg_type_announce), + STMMAC_STAT(ptp_rx_msg_type_management), + STMMAC_STAT(ptp_rx_msg_pkt_reserved_type), STMMAC_STAT(ptp_frame_type), STMMAC_STAT(ptp_ver), STMMAC_STAT(timestamp_dropped), From c7a4e3d8c0d43a4f31f8b2ccf476e5a26eb85142 Mon Sep 17 00:00:00 2001 From: Alexander Kochetkov Date: Mon, 14 Nov 2016 16:32:52 +0300 Subject: [PATCH 664/792] net: arc_emac: annonce IFF_MULTICAST support Multicast support was implemented by commit 775dd682e2b0ec7 ('arc_emac: implement promiscuous mode and multicast filtering'). It can be enabled explicity using 'ifconfig eth0 multicast'. The patch is needed in order to remove explicit configuration as most devices has multicast mode enabled by default. Signed-off-by: Alexander Kochetkov Signed-off-by: David S. Miller --- drivers/net/ethernet/arc/emac_main.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/net/ethernet/arc/emac_main.c b/drivers/net/ethernet/arc/emac_main.c index b0da9693f28a..2e4ee86a7e51 100644 --- a/drivers/net/ethernet/arc/emac_main.c +++ b/drivers/net/ethernet/arc/emac_main.c @@ -764,8 +764,6 @@ int arc_emac_probe(struct net_device *ndev, int interface) ndev->netdev_ops = &arc_emac_netdev_ops; ndev->ethtool_ops = &arc_emac_ethtool_ops; ndev->watchdog_timeo = TX_TIMEOUT; - /* FIXME :: no multicast support yet */ - ndev->flags &= ~IFF_MULTICAST; priv = netdev_priv(ndev); priv->dev = dev; From d0e3f65b34c528ec2b7d1ba9a620b483f71788d3 Mon Sep 17 00:00:00 2001 From: Alexander Kochetkov Date: Mon, 14 Nov 2016 16:32:53 +0300 Subject: [PATCH 665/792] net: arc_emac: don't pass multicast packets to kernel in non-multicast mode The patch disable capturing multicast packets when multicast mode disabled for ethernet ('ifconfig eth0 -multicast'). In that case no multicast packet will be passed to kernel. Signed-off-by: Alexander Kochetkov Signed-off-by: David S. Miller --- drivers/net/ethernet/arc/emac_main.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/arc/emac_main.c b/drivers/net/ethernet/arc/emac_main.c index 2e4ee86a7e51..be865b4dada2 100644 --- a/drivers/net/ethernet/arc/emac_main.c +++ b/drivers/net/ethernet/arc/emac_main.c @@ -460,7 +460,7 @@ static void arc_emac_set_rx_mode(struct net_device *ndev) if (ndev->flags & IFF_ALLMULTI) { arc_reg_set(priv, R_LAFL, ~0); arc_reg_set(priv, R_LAFH, ~0); - } else { + } else if (ndev->flags & IFF_MULTICAST) { struct netdev_hw_addr *ha; unsigned int filter[2] = { 0, 0 }; int bit; @@ -472,6 +472,9 @@ static void arc_emac_set_rx_mode(struct net_device *ndev) arc_reg_set(priv, R_LAFL, filter[0]); arc_reg_set(priv, R_LAFH, filter[1]); + } else { + arc_reg_set(priv, R_LAFL, 0); + arc_reg_set(priv, R_LAFH, 0); } } } From 73e2d5e34b6cdd1080038daf3d6d6d744a9eefe6 Mon Sep 17 00:00:00 2001 From: Pablo Neira Date: Mon, 14 Nov 2016 23:40:30 +0100 Subject: [PATCH 666/792] udp: restore UDPlite many-cast delivery Honor udptable parameter that is passed to __udp*_lib_mcast_deliver(), otherwise udplite broadcast/multicast use the wrong table and it breaks. Fixes: 2dc41cff7545 ("udp: Use hash2 for long hash1 chains in __udp*_lib_mcast_deliver.") Signed-off-by: Pablo Neira Ayuso Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/udp.c | 6 +++--- net/ipv6/udp.c | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index d123d68f4d1d..0de9d5d2b9ae 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -1652,10 +1652,10 @@ static int __udp4_lib_mcast_deliver(struct net *net, struct sk_buff *skb, if (use_hash2) { hash2_any = udp4_portaddr_hash(net, htonl(INADDR_ANY), hnum) & - udp_table.mask; - hash2 = udp4_portaddr_hash(net, daddr, hnum) & udp_table.mask; + udptable->mask; + hash2 = udp4_portaddr_hash(net, daddr, hnum) & udptable->mask; start_lookup: - hslot = &udp_table.hash2[hash2]; + hslot = &udptable->hash2[hash2]; offset = offsetof(typeof(*sk), __sk_common.skc_portaddr_node); } diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index b2ef061e6836..e5056d4873d1 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -706,10 +706,10 @@ static int __udp6_lib_mcast_deliver(struct net *net, struct sk_buff *skb, if (use_hash2) { hash2_any = udp6_portaddr_hash(net, &in6addr_any, hnum) & - udp_table.mask; - hash2 = udp6_portaddr_hash(net, daddr, hnum) & udp_table.mask; + udptable->mask; + hash2 = udp6_portaddr_hash(net, daddr, hnum) & udptable->mask; start_lookup: - hslot = &udp_table.hash2[hash2]; + hslot = &udptable->hash2[hash2]; offset = offsetof(typeof(*sk), __sk_common.skc_portaddr_node); } From e88a2766143a27bfe6704b4493b214de4094cf29 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 14 Nov 2016 16:28:42 -0800 Subject: [PATCH 667/792] gro_cells: mark napi struct as not busy poll candidates Rolf Neugebauer reported very long delays at netns dismantle. Eric W. Biederman was kind enough to look at this problem and noticed synchronize_net() occurring from netif_napi_del() that was added in linux-4.5 Busy polling makes no sense for tunnels NAPI. If busy poll is used for sessions over tunnels, the poller will need to poll the physical device queue anyway. netif_tx_napi_add() could be used here, but function name is misleading, and renaming it is not stable material, so set NAPI_STATE_NO_BUSY_POLL bit directly. This will avoid inserting gro_cells napi structures in napi_hash[] and avoid the problematic synchronize_net() (per possible cpu) that Rolf reported. Fixes: 93d05d4a320c ("net: provide generic busy polling to all NAPI drivers") Signed-off-by: Eric Dumazet Reported-by: Rolf Neugebauer Reported-by: Eric W. Biederman Acked-by: Cong Wang Tested-by: Rolf Neugebauer Signed-off-by: David S. Miller --- include/net/gro_cells.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/include/net/gro_cells.h b/include/net/gro_cells.h index d15214d673b2..2a1abbf8da74 100644 --- a/include/net/gro_cells.h +++ b/include/net/gro_cells.h @@ -68,6 +68,9 @@ static inline int gro_cells_init(struct gro_cells *gcells, struct net_device *de struct gro_cell *cell = per_cpu_ptr(gcells->cells, i); __skb_queue_head_init(&cell->napi_skbs); + + set_bit(NAPI_STATE_NO_BUSY_POLL, &cell->napi.state); + netif_napi_add(dev, &cell->napi, gro_cell_poll, 64); napi_enable(&cell->napi); } From 7e75f74a171a8146cc3ee92d5562878b40c25fb5 Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Tue, 15 Nov 2016 10:39:03 +0100 Subject: [PATCH 668/792] rtnetlink: fix rtnl_vfinfo_size The size reported by rtnl_vfinfo_size doesn't match the space used by rtnl_fill_vfinfo. rtnl_vfinfo_size currently doesn't account for the nest attributes used by statistics (added in commit 3b766cd83232), nor for struct ifla_vf_tx_rate (since commit ed616689a3d9, which added ifla_vf_rate to the dump without removing ifla_vf_tx_rate, but replaced ifla_vf_tx_rate with ifla_vf_rate in the size computation). Fixes: 3b766cd83232 ("net/core: Add reading VF statistics through the PF netdevice") Fixes: ed616689a3d9 ("net-next:v4: Add support to configure SR-IOV VF minimum and maximum Tx rate through ip tool") Signed-off-by: Sabrina Dubroca Signed-off-by: David S. Miller --- net/core/rtnetlink.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c index db313ec7af32..96f4bf274e30 100644 --- a/net/core/rtnetlink.c +++ b/net/core/rtnetlink.c @@ -840,18 +840,20 @@ static inline int rtnl_vfinfo_size(const struct net_device *dev, if (dev->dev.parent && dev_is_pci(dev->dev.parent) && (ext_filter_mask & RTEXT_FILTER_VF)) { int num_vfs = dev_num_vf(dev->dev.parent); - size_t size = nla_total_size(sizeof(struct nlattr)); - size += nla_total_size(num_vfs * sizeof(struct nlattr)); + size_t size = nla_total_size(0); size += num_vfs * - (nla_total_size(sizeof(struct ifla_vf_mac)) + - nla_total_size(MAX_VLAN_LIST_LEN * - sizeof(struct nlattr)) + + (nla_total_size(0) + + nla_total_size(sizeof(struct ifla_vf_mac)) + + nla_total_size(sizeof(struct ifla_vf_vlan)) + + nla_total_size(0) + /* nest IFLA_VF_VLAN_LIST */ nla_total_size(MAX_VLAN_LIST_LEN * sizeof(struct ifla_vf_vlan_info)) + nla_total_size(sizeof(struct ifla_vf_spoofchk)) + + nla_total_size(sizeof(struct ifla_vf_tx_rate)) + nla_total_size(sizeof(struct ifla_vf_rate)) + nla_total_size(sizeof(struct ifla_vf_link_state)) + nla_total_size(sizeof(struct ifla_vf_rss_query_en)) + + nla_total_size(0) + /* nest IFLA_VF_STATS */ /* IFLA_VF_STATS_RX_PACKETS */ nla_total_size_64bit(sizeof(__u64)) + /* IFLA_VF_STATS_TX_PACKETS */ From b3cfaa31e3851c743d3f9d3441710f7ff6f7e868 Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Tue, 15 Nov 2016 11:16:35 +0100 Subject: [PATCH 669/792] rtnetlink: fix rtnl message size computation for XDP rtnl_xdp_size() only considers the size of the actual payload attribute, and misses the space taken by the attribute used for nesting (IFLA_XDP). Fixes: d1fdd9138682 ("rtnl: add option for setting link xdp prog") Signed-off-by: Sabrina Dubroca Reviewed-by: Brenden Blanco Signed-off-by: David S. Miller --- net/core/rtnetlink.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c index 96f4bf274e30..a6529c55ffb7 100644 --- a/net/core/rtnetlink.c +++ b/net/core/rtnetlink.c @@ -901,7 +901,8 @@ static size_t rtnl_port_size(const struct net_device *dev, static size_t rtnl_xdp_size(const struct net_device *dev) { - size_t xdp_size = nla_total_size(1); /* XDP_ATTACHED */ + size_t xdp_size = nla_total_size(0) + /* nest IFLA_XDP */ + nla_total_size(1); /* XDP_ATTACHED */ if (!dev->netdev_ops->ndo_xdp) return 0; From bc9db5ad3253c8e17969bd802c47b73e63f125ab Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Fri, 11 Nov 2016 19:14:24 +0200 Subject: [PATCH 670/792] drm/i915: Assume non-DP++ port if dvo_port is HDMI and there's no AUX ch specified in the VBT MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit My heuristic for detecting type 1 DVI DP++ adaptors based on the VBT port information apparently didn't survive the reality of buggy VBTs. In this particular case we have a machine with a natice HDMI port, but the VBT tells us it's a DP++ port based on its capabilities. The dvo_port information in VBT does claim that we're dealing with a HDMI port though, but we have other machines which do the same even when they actually have DP++ ports. So that piece of information alone isn't sufficient to tell the two apart. After staring at a bunch of VBTs from various machines, I have to conclude that the only other semi-reliable clue we can use is the presence of the AUX channel in the VBT. On this particular machine AUX channel is specified as zero, whereas on some of the other machines which listed the DP++ port as HDMI have a non-zero AUX channel. I've also seen VBTs which have dvo_port a DP but have a zero AUX channel. I believe those we need to treat as DP ports, so we'll limit the AUX channel check to just the cases where dvo_port is HDMI. If we encounter any more serious failures with this heuristic I think we'll have to have to throw it out entirely. But that could mean that there is a risk of type 1 DVI dongle users getting greeted by a black screen, so I'd rather not go there unless absolutely necessary. v2: Remove the duplicate PORT_A check (Daniel) Fix some typos in the commit message Cc: Daniel Otero Cc: stable@vger.kernel.org Tested-by: Daniel Otero Fixes: d61992565bd3 ("drm/i915: Determine DP++ type 1 DVI adaptor presence based on VBT") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97994 Signed-off-by: Ville Syrjälä Link: http://patchwork.freedesktop.org/patch/msgid/1478884464-14251-1-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Daniel Vetter (cherry picked from commit 7a17995a3dc8613f778a9e2fd20e870f17789544) Signed-off-by: Jani Nikula --- drivers/gpu/drm/i915/intel_bios.c | 30 ++++++++++++++++++++------- drivers/gpu/drm/i915/intel_vbt_defs.h | 3 ++- 2 files changed, 24 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c index 1f8af87c6294..cf2560708e03 100644 --- a/drivers/gpu/drm/i915/intel_bios.c +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -1143,7 +1143,7 @@ static void parse_ddi_port(struct drm_i915_private *dev_priv, enum port port, if (!child) return; - aux_channel = child->raw[25]; + aux_channel = child->common.aux_channel; ddc_pin = child->common.ddc_pin; is_dvi = child->common.device_type & DEVICE_TYPE_TMDS_DVI_SIGNALING; @@ -1673,7 +1673,8 @@ bool intel_bios_is_port_edp(struct drm_i915_private *dev_priv, enum port port) return false; } -bool intel_bios_is_port_dp_dual_mode(struct drm_i915_private *dev_priv, enum port port) +static bool child_dev_is_dp_dual_mode(const union child_device_config *p_child, + enum port port) { static const struct { u16 dp, hdmi; @@ -1687,22 +1688,35 @@ bool intel_bios_is_port_dp_dual_mode(struct drm_i915_private *dev_priv, enum por [PORT_D] = { DVO_PORT_DPD, DVO_PORT_HDMID, }, [PORT_E] = { DVO_PORT_DPE, DVO_PORT_HDMIE, }, }; - int i; if (port == PORT_A || port >= ARRAY_SIZE(port_mapping)) return false; - if (!dev_priv->vbt.child_dev_num) + if ((p_child->common.device_type & DEVICE_TYPE_DP_DUAL_MODE_BITS) != + (DEVICE_TYPE_DP_DUAL_MODE & DEVICE_TYPE_DP_DUAL_MODE_BITS)) return false; + if (p_child->common.dvo_port == port_mapping[port].dp) + return true; + + /* Only accept a HDMI dvo_port as DP++ if it has an AUX channel */ + if (p_child->common.dvo_port == port_mapping[port].hdmi && + p_child->common.aux_channel != 0) + return true; + + return false; +} + +bool intel_bios_is_port_dp_dual_mode(struct drm_i915_private *dev_priv, + enum port port) +{ + int i; + for (i = 0; i < dev_priv->vbt.child_dev_num; i++) { const union child_device_config *p_child = &dev_priv->vbt.child_dev[i]; - if ((p_child->common.dvo_port == port_mapping[port].dp || - p_child->common.dvo_port == port_mapping[port].hdmi) && - (p_child->common.device_type & DEVICE_TYPE_DP_DUAL_MODE_BITS) == - (DEVICE_TYPE_DP_DUAL_MODE & DEVICE_TYPE_DP_DUAL_MODE_BITS)) + if (child_dev_is_dp_dual_mode(p_child, port)) return true; } diff --git a/drivers/gpu/drm/i915/intel_vbt_defs.h b/drivers/gpu/drm/i915/intel_vbt_defs.h index 68db9621f1f0..8886cab19f98 100644 --- a/drivers/gpu/drm/i915/intel_vbt_defs.h +++ b/drivers/gpu/drm/i915/intel_vbt_defs.h @@ -280,7 +280,8 @@ struct common_child_dev_config { u8 dp_support:1; u8 tmds_support:1; u8 support_reserved:5; - u8 not_common3[12]; + u8 aux_channel; + u8 not_common3[11]; u8 iboost_level; } __packed; From 9164b4ceb7b492a77c7fe770a4b9d1375c9cd45a Mon Sep 17 00:00:00 2001 From: David Herrmann Date: Tue, 15 Nov 2016 13:01:57 +0100 Subject: [PATCH 671/792] x86/sysfb: Add support for 64bit EFI lfb_base The screen_info object was extended to support 64-bit lfb_base addresses in: ae2ee627dc87 ("efifb: Add support for 64-bit frame buffer addresses") However, the x86 simple-framebuffer setup code never made use of it. Fix it to properly assemble and verify the lfb_base before advertising simple-framebuffer devices. In particular, this means if VIDEO_CAPABILITY_64BIT_BASE is set, the screen_info->ext_lfb_base field will contain the upper 32bit of the actual lfb_base. Make sure the address is not 0 (i.e., unset), as well as does not overflow the physical address type. Signed-off-by: David Herrmann Acked-by: Thomas Gleixner Cc: Linus Torvalds Cc: Matt Fleming Cc: Peter Zijlstra Cc: Tom Gundersen Link: http://lkml.kernel.org/r/20161115120158.15388-2-dh.herrmann@gmail.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/sysfb_simplefb.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/sysfb_simplefb.c b/arch/x86/kernel/sysfb_simplefb.c index 764a29f84de7..35b86415871f 100644 --- a/arch/x86/kernel/sysfb_simplefb.c +++ b/arch/x86/kernel/sysfb_simplefb.c @@ -67,6 +67,20 @@ __init int create_simplefb(const struct screen_info *si, struct platform_device *pd; struct resource res; unsigned long len; + u64 base; + + /* + * If the 64BIT_BASE capability is set, ext_lfb_base will contain the + * upper half of the base address. Assemble the address, then make sure + * it is valid and we can actually access it. + */ + base = si->lfb_base; + if (si->capabilities & VIDEO_CAPABILITY_64BIT_BASE) + base |= (u64)si->ext_lfb_base << 32; + if (!base || (u64)(resource_size_t)base != base) { + printk(KERN_DEBUG "sysfb: inaccessible VRAM base\n"); + return -EINVAL; + } /* don't use lfb_size as it may contain the whole VMEM instead of only * the part that is occupied by the framebuffer */ @@ -81,8 +95,8 @@ __init int create_simplefb(const struct screen_info *si, memset(&res, 0, sizeof(res)); res.flags = IORESOURCE_MEM | IORESOURCE_BUSY; res.name = simplefb_resname; - res.start = si->lfb_base; - res.end = si->lfb_base + len - 1; + res.start = base; + res.end = res.start + len - 1; if (res.end <= res.start) return -EINVAL; From f96acec8c8020807429d21324547f4b904c37177 Mon Sep 17 00:00:00 2001 From: David Herrmann Date: Tue, 15 Nov 2016 13:01:58 +0100 Subject: [PATCH 672/792] x86/sysfb: Fix lfb_size calculation The screen_info.lfb_size field is shifted by 16 bits *only* in case of VBE. This has historical reasons since VBE advertised it similarly. However, in case of EFI framebuffers, the size is no longer shifted. Fix the x86 simple-framebuffer setup code to use the correct size in the non-VBE case. While at it, avoid variable abbreviations and rename 'len' to 'length', and use the correct types matching the screen_info definition. Signed-off-by: David Herrmann Acked-by: Thomas Gleixner Cc: Linus Torvalds Cc: Matt Fleming Cc: Peter Zijlstra Cc: Tom Gundersen Link: http://lkml.kernel.org/r/20161115120158.15388-3-dh.herrmann@gmail.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/sysfb_simplefb.c | 25 +++++++++++++++++-------- 1 file changed, 17 insertions(+), 8 deletions(-) diff --git a/arch/x86/kernel/sysfb_simplefb.c b/arch/x86/kernel/sysfb_simplefb.c index 35b86415871f..85195d447a92 100644 --- a/arch/x86/kernel/sysfb_simplefb.c +++ b/arch/x86/kernel/sysfb_simplefb.c @@ -66,8 +66,8 @@ __init int create_simplefb(const struct screen_info *si, { struct platform_device *pd; struct resource res; - unsigned long len; - u64 base; + u64 base, size; + u32 length; /* * If the 64BIT_BASE capability is set, ext_lfb_base will contain the @@ -82,11 +82,20 @@ __init int create_simplefb(const struct screen_info *si, return -EINVAL; } - /* don't use lfb_size as it may contain the whole VMEM instead of only - * the part that is occupied by the framebuffer */ - len = mode->height * mode->stride; - len = PAGE_ALIGN(len); - if (len > (u64)si->lfb_size << 16) { + /* + * Don't use lfb_size as IORESOURCE size, since it may contain the + * entire VMEM, and thus require huge mappings. Use just the part we + * need, that is, the part where the framebuffer is located. But verify + * that it does not exceed the advertised VMEM. + * Note that in case of VBE, the lfb_size is shifted by 16 bits for + * historical reasons. + */ + size = si->lfb_size; + if (si->orig_video_isVGA == VIDEO_TYPE_VLFB) + size <<= 16; + length = mode->height * mode->stride; + length = PAGE_ALIGN(length); + if (length > size) { printk(KERN_WARNING "sysfb: VRAM smaller than advertised\n"); return -EINVAL; } @@ -96,7 +105,7 @@ __init int create_simplefb(const struct screen_info *si, res.flags = IORESOURCE_MEM | IORESOURCE_BUSY; res.name = simplefb_resname; res.start = base; - res.end = res.start + len - 1; + res.end = res.start + length - 1; if (res.end <= res.start) return -EINVAL; From 2c8c34167c987e463d62a55384fcec7fa8d03a54 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Thu, 29 Sep 2016 12:59:39 +0300 Subject: [PATCH 673/792] mfd: lpss: Fix Intel Kaby Lake PCH-H properties There are a few issues on Intel Kaby Lake PCH-H properties added by commit a6a576b78e09 ("mfd: lpss: Add Intel Kaby Lake PCH-H PCI IDs"): - Input clock of I2C controller on Intel Kaby Lake PCH-H is 120 MHz not 133 MHz. This was probably copy-paste error from Intel Broxton I2C properties. - There is no default I2C SDA hold time specified which is used when ACPI doesn't provide it. I got information from Windows driver team that Kaby Lake PCH-H can use the same configuration than Intel Sunrisepoint PCH. - Common HS-UART properties are not used. Fix these by reusing the Sunrisepoint properties on Kaby Lake PCH-H. Fixes: a6a576b78e09 ("mfd: lpss: Add Intel Kaby Lake PCH-H PCI IDs") Reported-by: Xiang A Wang Signed-off-by: Jarkko Nikula Acked-by: Mika Westerberg Signed-off-by: Lee Jones --- drivers/mfd/intel-lpss-pci.c | 31 +++++++++---------------------- 1 file changed, 9 insertions(+), 22 deletions(-) diff --git a/drivers/mfd/intel-lpss-pci.c b/drivers/mfd/intel-lpss-pci.c index 3228fd182a99..9ff243970e93 100644 --- a/drivers/mfd/intel-lpss-pci.c +++ b/drivers/mfd/intel-lpss-pci.c @@ -123,19 +123,6 @@ static const struct intel_lpss_platform_info apl_i2c_info = { .properties = apl_i2c_properties, }; -static const struct intel_lpss_platform_info kbl_info = { - .clk_rate = 120000000, -}; - -static const struct intel_lpss_platform_info kbl_uart_info = { - .clk_rate = 120000000, - .clk_con_id = "baudclk", -}; - -static const struct intel_lpss_platform_info kbl_i2c_info = { - .clk_rate = 133000000, -}; - static const struct pci_device_id intel_lpss_pci_ids[] = { /* BXT A-Step */ { PCI_VDEVICE(INTEL, 0x0aac), (kernel_ulong_t)&bxt_i2c_info }, @@ -207,15 +194,15 @@ static const struct pci_device_id intel_lpss_pci_ids[] = { { PCI_VDEVICE(INTEL, 0xa161), (kernel_ulong_t)&spt_i2c_info }, { PCI_VDEVICE(INTEL, 0xa166), (kernel_ulong_t)&spt_uart_info }, /* KBL-H */ - { PCI_VDEVICE(INTEL, 0xa2a7), (kernel_ulong_t)&kbl_uart_info }, - { PCI_VDEVICE(INTEL, 0xa2a8), (kernel_ulong_t)&kbl_uart_info }, - { PCI_VDEVICE(INTEL, 0xa2a9), (kernel_ulong_t)&kbl_info }, - { PCI_VDEVICE(INTEL, 0xa2aa), (kernel_ulong_t)&kbl_info }, - { PCI_VDEVICE(INTEL, 0xa2e0), (kernel_ulong_t)&kbl_i2c_info }, - { PCI_VDEVICE(INTEL, 0xa2e1), (kernel_ulong_t)&kbl_i2c_info }, - { PCI_VDEVICE(INTEL, 0xa2e2), (kernel_ulong_t)&kbl_i2c_info }, - { PCI_VDEVICE(INTEL, 0xa2e3), (kernel_ulong_t)&kbl_i2c_info }, - { PCI_VDEVICE(INTEL, 0xa2e6), (kernel_ulong_t)&kbl_uart_info }, + { PCI_VDEVICE(INTEL, 0xa2a7), (kernel_ulong_t)&spt_uart_info }, + { PCI_VDEVICE(INTEL, 0xa2a8), (kernel_ulong_t)&spt_uart_info }, + { PCI_VDEVICE(INTEL, 0xa2a9), (kernel_ulong_t)&spt_info }, + { PCI_VDEVICE(INTEL, 0xa2aa), (kernel_ulong_t)&spt_info }, + { PCI_VDEVICE(INTEL, 0xa2e0), (kernel_ulong_t)&spt_i2c_info }, + { PCI_VDEVICE(INTEL, 0xa2e1), (kernel_ulong_t)&spt_i2c_info }, + { PCI_VDEVICE(INTEL, 0xa2e2), (kernel_ulong_t)&spt_i2c_info }, + { PCI_VDEVICE(INTEL, 0xa2e3), (kernel_ulong_t)&spt_i2c_info }, + { PCI_VDEVICE(INTEL, 0xa2e6), (kernel_ulong_t)&spt_uart_info }, { } }; MODULE_DEVICE_TABLE(pci, intel_lpss_pci_ids); From 274e43edcda6f709aa67e436b3123e45a6270923 Mon Sep 17 00:00:00 2001 From: Azhar Shaikh Date: Wed, 12 Oct 2016 10:12:20 -0700 Subject: [PATCH 674/792] mfd: intel-lpss: Do not put device in reset state on suspend Commit 41a3da2b8e163 ("mfd: intel-lpss: Save register context on suspend") saved the register context while going to suspend and also put the device in reset state. Due to the resetting of device, system cannot enter S3/S0ix states when no_console_suspend flag is enabled. The system and serial console both hang. The resetting of device is not needed while going to suspend. Hence remove this code. Cc: stable@vger.kernel.org Fixes: 41a3da2b8e163 ("mfd: intel-lpss: Save register context on suspend") Signed-off-by: Azhar Shaikh Acked-by: Mika Westerberg Reviewed-by: Andy Shevchenko Signed-off-by: Lee Jones --- drivers/mfd/intel-lpss.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/mfd/intel-lpss.c b/drivers/mfd/intel-lpss.c index 41b113875d64..70c646b0097d 100644 --- a/drivers/mfd/intel-lpss.c +++ b/drivers/mfd/intel-lpss.c @@ -502,9 +502,6 @@ int intel_lpss_suspend(struct device *dev) for (i = 0; i < LPSS_PRIV_REG_COUNT; i++) lpss->priv_ctx[i] = readl(lpss->priv + i * 4); - /* Put the device into reset state */ - writel(0, lpss->priv + LPSS_PRIV_RESETS); - return 0; } EXPORT_SYMBOL_GPL(intel_lpss_suspend); From 9600702082b29fd3f8a6d744df74ad4c48d4a432 Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Mon, 17 Oct 2016 10:32:13 +0300 Subject: [PATCH 675/792] mfd: intel_soc_pmic_bxtwc: Fix usbc interrupt The wcove USB Type-C driver is currently being flooded with interrupts that are not targeted to it. The reason for that is because all CHRG first level interrupts are mapped to it. This fixes the issue by introducing separate irq for the usbc device, and mapping only USB Type-C PHY interrupts to it. Fixes: 9c6235c86332 ("mfd: intel_soc_pmic_bxtwc: Add bxt_wcove_usbc device") Signed-off-by: Heikki Krogerus Signed-off-by: Lee Jones --- drivers/mfd/intel_soc_pmic_bxtwc.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/mfd/intel_soc_pmic_bxtwc.c b/drivers/mfd/intel_soc_pmic_bxtwc.c index 43e54b7e908f..f9a8c5203873 100644 --- a/drivers/mfd/intel_soc_pmic_bxtwc.c +++ b/drivers/mfd/intel_soc_pmic_bxtwc.c @@ -86,6 +86,7 @@ enum bxtwc_irqs_level2 { BXTWC_THRM2_IRQ, BXTWC_BCU_IRQ, BXTWC_ADC_IRQ, + BXTWC_USBC_IRQ, BXTWC_CHGR0_IRQ, BXTWC_CHGR1_IRQ, BXTWC_GPIO0_IRQ, @@ -111,7 +112,8 @@ static const struct regmap_irq bxtwc_regmap_irqs_level2[] = { REGMAP_IRQ_REG(BXTWC_THRM2_IRQ, 2, 0xff), REGMAP_IRQ_REG(BXTWC_BCU_IRQ, 3, 0x1f), REGMAP_IRQ_REG(BXTWC_ADC_IRQ, 4, 0xff), - REGMAP_IRQ_REG(BXTWC_CHGR0_IRQ, 5, 0x3f), + REGMAP_IRQ_REG(BXTWC_USBC_IRQ, 5, BIT(5)), + REGMAP_IRQ_REG(BXTWC_CHGR0_IRQ, 5, 0x1f), REGMAP_IRQ_REG(BXTWC_CHGR1_IRQ, 6, 0x1f), REGMAP_IRQ_REG(BXTWC_GPIO0_IRQ, 7, 0xff), REGMAP_IRQ_REG(BXTWC_GPIO1_IRQ, 8, 0x3f), @@ -146,7 +148,7 @@ static struct resource adc_resources[] = { }; static struct resource usbc_resources[] = { - DEFINE_RES_IRQ_NAMED(BXTWC_CHGR0_IRQ, "USBC"), + DEFINE_RES_IRQ(BXTWC_USBC_IRQ), }; static struct resource charger_resources[] = { From f40584200bc4af7aa4399635b9ac213c62a13ae7 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Tue, 1 Nov 2016 10:22:53 +0100 Subject: [PATCH 676/792] mfd: stmpe: Fix RESET regression on STMPE2401 Since commit c4dd1ba355aae2bc3d1213da6c66c53e3c31e028 ("mfd: stmpe: Add reset support for all STMPE variant") we're resetting the STMPE expanders before use. This caused a regression on the STMP2401 on the Nomadik NHK8815: stmpe-i2c 0-0043: stmpe2401 detected, chip id: 0x101 nmk-i2c 101f8000.i2c0: write to slave 0x43 timed out nmk-i2c 101f8000.i2c0: no ack received after address transmission stmpe-i2c 0-0044: stmpe2401 detected, chip id: 0x101 nmk-i2c 101f8000.i2c0: write to slave 0x44 timed out nmk-i2c 101f8000.i2c0: no ack received after address transmission It turns out that we start to poll for the reset bit to go low again too quickly: the STMPE2401 is not yet online and ready to be asked for the status of the RESET bit. By introducing a 10ms delay before starting to hammer the register for information, we get back to normal: stmpe-i2c 0-0043: stmpe2401 detected, chip id: 0x101 stmpe-i2c 0-0044: stmpe2401 detected, chip id: 0x101 Cc: stable@vger.kernel.org Cc: Amelie Delaunay Fixes: c4dd1ba355aa ("mfd: stmpe: Add reset support for all STMPE variant") Signed-off-by: Linus Walleij Acked-by: Patrice Chotard Signed-off-by: Lee Jones --- drivers/mfd/stmpe.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c index cfdae8a3d779..b0c7bcdaf5df 100644 --- a/drivers/mfd/stmpe.c +++ b/drivers/mfd/stmpe.c @@ -851,6 +851,8 @@ static int stmpe_reset(struct stmpe *stmpe) if (ret < 0) return ret; + msleep(10); + timeout = jiffies + msecs_to_jiffies(100); while (time_before(jiffies, timeout)) { ret = __stmpe_reg_read(stmpe, stmpe->regs[STMPE_IDX_SYS_CTRL]); From 722f191080de641f023feaa7d5648caf377844f5 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 1 Nov 2016 11:38:18 +0100 Subject: [PATCH 677/792] mfd: core: Fix device reference leak in mfd_clone_cell Make sure to drop the reference taken by bus_find_device_by_name() before returning from mfd_clone_cell(). Fixes: a9bbba996302 ("mfd: add platform_device sharing support for mfd") Signed-off-by: Johan Hovold Signed-off-by: Lee Jones --- drivers/mfd/mfd-core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c index 3ac486a597f3..c57e407020f1 100644 --- a/drivers/mfd/mfd-core.c +++ b/drivers/mfd/mfd-core.c @@ -399,6 +399,8 @@ int mfd_clone_cell(const char *cell, const char **clones, size_t n_clones) clones[i]); } + put_device(dev); + return 0; } EXPORT_SYMBOL(mfd_clone_cell); From 19ff7fcc76e6911a955742b40f85ba1030ccba5e Mon Sep 17 00:00:00 2001 From: Mike Marshall Date: Wed, 16 Nov 2016 11:52:19 -0500 Subject: [PATCH 678/792] orangefs: add .owner to debugfs file_operations Without ".owner = THIS_MODULE" it is possible to crash the kernel by unloading the Orangefs module while someone is reading debugfs files. Signed-off-by: Mike Marshall --- fs/orangefs/orangefs-debugfs.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/orangefs/orangefs-debugfs.c b/fs/orangefs/orangefs-debugfs.c index d484068ca716..38887cc5577f 100644 --- a/fs/orangefs/orangefs-debugfs.c +++ b/fs/orangefs/orangefs-debugfs.c @@ -114,6 +114,7 @@ static const struct seq_operations help_debug_ops = { }; const struct file_operations debug_help_fops = { + .owner = THIS_MODULE, .open = orangefs_debug_help_open, .read = seq_read, .release = seq_release, @@ -121,6 +122,7 @@ const struct file_operations debug_help_fops = { }; static const struct file_operations kernel_debug_fops = { + .owner = THIS_MODULE, .open = orangefs_debug_open, .read = orangefs_debug_read, .write = orangefs_debug_write, From f23cc643f9baec7f71f2b74692da3cf03abbbfda Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Mon, 14 Nov 2016 15:45:36 -0500 Subject: [PATCH 679/792] bpf: fix range arithmetic for bpf map access I made some invalid assumptions with BPF_AND and BPF_MOD that could result in invalid accesses to bpf map entries. Fix this up by doing a few things 1) Kill BPF_MOD support. This doesn't actually get used by the compiler in real life and just adds extra complexity. 2) Fix the logic for BPF_AND, don't allow AND of negative numbers and set the minimum value to 0 for positive AND's. 3) Don't do operations on the ranges if they are set to the limits, as they are by definition undefined, and allowing arithmetic operations on those values could make them appear valid when they really aren't. This fixes the testcase provided by Jann as well as a few other theoretical problems. Reported-by: Jann Horn Signed-off-by: Josef Bacik Acked-by: Alexei Starovoitov Signed-off-by: David S. Miller --- include/linux/bpf_verifier.h | 5 +-- kernel/bpf/verifier.c | 70 ++++++++++++++++++++++++------------ 2 files changed, 50 insertions(+), 25 deletions(-) diff --git a/include/linux/bpf_verifier.h b/include/linux/bpf_verifier.h index 7035b997aaa5..6aaf425cebc3 100644 --- a/include/linux/bpf_verifier.h +++ b/include/linux/bpf_verifier.h @@ -14,7 +14,7 @@ * are obviously wrong for any sort of memory access. */ #define BPF_REGISTER_MAX_RANGE (1024 * 1024 * 1024) -#define BPF_REGISTER_MIN_RANGE -(1024 * 1024 * 1024) +#define BPF_REGISTER_MIN_RANGE -1 struct bpf_reg_state { enum bpf_reg_type type; @@ -22,7 +22,8 @@ struct bpf_reg_state { * Used to determine if any memory access using this register will * result in a bad access. */ - u64 min_value, max_value; + s64 min_value; + u64 max_value; union { /* valid when type == CONST_IMM | PTR_TO_STACK | UNKNOWN_VALUE */ s64 imm; diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index 99a7e5b388f2..6a936159c6e0 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -216,8 +216,8 @@ static void print_verifier_state(struct bpf_verifier_state *state) reg->map_ptr->key_size, reg->map_ptr->value_size); if (reg->min_value != BPF_REGISTER_MIN_RANGE) - verbose(",min_value=%llu", - (unsigned long long)reg->min_value); + verbose(",min_value=%lld", + (long long)reg->min_value); if (reg->max_value != BPF_REGISTER_MAX_RANGE) verbose(",max_value=%llu", (unsigned long long)reg->max_value); @@ -758,7 +758,7 @@ static int check_mem_access(struct bpf_verifier_env *env, u32 regno, int off, * index'es we need to make sure that whatever we use * will have a set floor within our range. */ - if ((s64)reg->min_value < 0) { + if (reg->min_value < 0) { verbose("R%d min value is negative, either use unsigned index or do a if (index >=0) check.\n", regno); return -EACCES; @@ -1468,7 +1468,8 @@ static void check_reg_overflow(struct bpf_reg_state *reg) { if (reg->max_value > BPF_REGISTER_MAX_RANGE) reg->max_value = BPF_REGISTER_MAX_RANGE; - if ((s64)reg->min_value < BPF_REGISTER_MIN_RANGE) + if (reg->min_value < BPF_REGISTER_MIN_RANGE || + reg->min_value > BPF_REGISTER_MAX_RANGE) reg->min_value = BPF_REGISTER_MIN_RANGE; } @@ -1476,7 +1477,8 @@ static void adjust_reg_min_max_vals(struct bpf_verifier_env *env, struct bpf_insn *insn) { struct bpf_reg_state *regs = env->cur_state.regs, *dst_reg; - u64 min_val = BPF_REGISTER_MIN_RANGE, max_val = BPF_REGISTER_MAX_RANGE; + s64 min_val = BPF_REGISTER_MIN_RANGE; + u64 max_val = BPF_REGISTER_MAX_RANGE; bool min_set = false, max_set = false; u8 opcode = BPF_OP(insn->code); @@ -1512,22 +1514,43 @@ static void adjust_reg_min_max_vals(struct bpf_verifier_env *env, return; } + /* If one of our values was at the end of our ranges then we can't just + * do our normal operations to the register, we need to set the values + * to the min/max since they are undefined. + */ + if (min_val == BPF_REGISTER_MIN_RANGE) + dst_reg->min_value = BPF_REGISTER_MIN_RANGE; + if (max_val == BPF_REGISTER_MAX_RANGE) + dst_reg->max_value = BPF_REGISTER_MAX_RANGE; + switch (opcode) { case BPF_ADD: - dst_reg->min_value += min_val; - dst_reg->max_value += max_val; + if (dst_reg->min_value != BPF_REGISTER_MIN_RANGE) + dst_reg->min_value += min_val; + if (dst_reg->max_value != BPF_REGISTER_MAX_RANGE) + dst_reg->max_value += max_val; break; case BPF_SUB: - dst_reg->min_value -= min_val; - dst_reg->max_value -= max_val; + if (dst_reg->min_value != BPF_REGISTER_MIN_RANGE) + dst_reg->min_value -= min_val; + if (dst_reg->max_value != BPF_REGISTER_MAX_RANGE) + dst_reg->max_value -= max_val; break; case BPF_MUL: - dst_reg->min_value *= min_val; - dst_reg->max_value *= max_val; + if (dst_reg->min_value != BPF_REGISTER_MIN_RANGE) + dst_reg->min_value *= min_val; + if (dst_reg->max_value != BPF_REGISTER_MAX_RANGE) + dst_reg->max_value *= max_val; break; case BPF_AND: - /* & is special since it could end up with 0 bits set. */ - dst_reg->min_value &= min_val; + /* Disallow AND'ing of negative numbers, ain't nobody got time + * for that. Otherwise the minimum is 0 and the max is the max + * value we could AND against. + */ + if (min_val < 0) + dst_reg->min_value = BPF_REGISTER_MIN_RANGE; + else + dst_reg->min_value = 0; dst_reg->max_value = max_val; break; case BPF_LSH: @@ -1537,24 +1560,25 @@ static void adjust_reg_min_max_vals(struct bpf_verifier_env *env, */ if (min_val > ilog2(BPF_REGISTER_MAX_RANGE)) dst_reg->min_value = BPF_REGISTER_MIN_RANGE; - else + else if (dst_reg->min_value != BPF_REGISTER_MIN_RANGE) dst_reg->min_value <<= min_val; if (max_val > ilog2(BPF_REGISTER_MAX_RANGE)) dst_reg->max_value = BPF_REGISTER_MAX_RANGE; - else + else if (dst_reg->max_value != BPF_REGISTER_MAX_RANGE) dst_reg->max_value <<= max_val; break; case BPF_RSH: - dst_reg->min_value >>= min_val; - dst_reg->max_value >>= max_val; - break; - case BPF_MOD: - /* % is special since it is an unsigned modulus, so the floor - * will always be 0. + /* RSH by a negative number is undefined, and the BPF_RSH is an + * unsigned shift, so make the appropriate casts. */ - dst_reg->min_value = 0; - dst_reg->max_value = max_val - 1; + if (min_val < 0 || dst_reg->min_value < 0) + dst_reg->min_value = BPF_REGISTER_MIN_RANGE; + else + dst_reg->min_value = + (u64)(dst_reg->min_value) >> min_val; + if (dst_reg->max_value != BPF_REGISTER_MAX_RANGE) + dst_reg->max_value >>= max_val; break; default: reset_reg_range_values(regs, insn->dst_reg); From 3b7093346b326e5d3590c7d49f6aefe6fa5b2c9a Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Tue, 15 Nov 2016 05:46:06 -0500 Subject: [PATCH 680/792] ipv4: Restore fib_trie_flush_external function and fix call ordering The patch that removed the FIB offload infrastructure was a bit too aggressive and also removed code needed to clean up us splitting the table if additional rules were added. Specifically the function fib_trie_flush_external was called at the end of a new rule being added to flush the foreign trie entries from the main trie. I updated the code so that we only call fib_trie_flush_external on the main table so that we flush the entries for local from main. This way we don't call it for every rule change which is what was happening previously. Fixes: 347e3b28c1ba2 ("switchdev: remove FIB offload infrastructure") Reported-by: Eric Dumazet Cc: Jiri Pirko Signed-off-by: Alexander Duyck Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- include/net/ip_fib.h | 1 + net/ipv4/fib_frontend.c | 20 +++++++++---- net/ipv4/fib_trie.c | 65 +++++++++++++++++++++++++++++++++++++++++ 3 files changed, 81 insertions(+), 5 deletions(-) diff --git a/include/net/ip_fib.h b/include/net/ip_fib.h index b9314b48e39f..f390c3bb05c5 100644 --- a/include/net/ip_fib.h +++ b/include/net/ip_fib.h @@ -243,6 +243,7 @@ int fib_table_dump(struct fib_table *table, struct sk_buff *skb, struct netlink_callback *cb); int fib_table_flush(struct net *net, struct fib_table *table); struct fib_table *fib_trie_unmerge(struct fib_table *main_tb); +void fib_table_flush_external(struct fib_table *table); void fib_free_table(struct fib_table *tb); #ifndef CONFIG_IP_MULTIPLE_TABLES diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c index c3b80478226e..161fc0f0d752 100644 --- a/net/ipv4/fib_frontend.c +++ b/net/ipv4/fib_frontend.c @@ -151,7 +151,7 @@ static void fib_replace_table(struct net *net, struct fib_table *old, int fib_unmerge(struct net *net) { - struct fib_table *old, *new; + struct fib_table *old, *new, *main_table; /* attempt to fetch local table if it has been allocated */ old = fib_get_table(net, RT_TABLE_LOCAL); @@ -162,11 +162,21 @@ int fib_unmerge(struct net *net) if (!new) return -ENOMEM; + /* table is already unmerged */ + if (new == old) + return 0; + /* replace merged table with clean table */ - if (new != old) { - fib_replace_table(net, old, new); - fib_free_table(old); - } + fib_replace_table(net, old, new); + fib_free_table(old); + + /* attempt to fetch main table if it has been allocated */ + main_table = fib_get_table(net, RT_TABLE_MAIN); + if (!main_table) + return 0; + + /* flush local entries from main table */ + fib_table_flush_external(main_table); return 0; } diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c index 4cff74d4133f..735edc9d41a2 100644 --- a/net/ipv4/fib_trie.c +++ b/net/ipv4/fib_trie.c @@ -1760,6 +1760,71 @@ out: return NULL; } +/* Caller must hold RTNL */ +void fib_table_flush_external(struct fib_table *tb) +{ + struct trie *t = (struct trie *)tb->tb_data; + struct key_vector *pn = t->kv; + unsigned long cindex = 1; + struct hlist_node *tmp; + struct fib_alias *fa; + + /* walk trie in reverse order */ + for (;;) { + unsigned char slen = 0; + struct key_vector *n; + + if (!(cindex--)) { + t_key pkey = pn->key; + + /* cannot resize the trie vector */ + if (IS_TRIE(pn)) + break; + + /* resize completed node */ + pn = resize(t, pn); + cindex = get_index(pkey, pn); + + continue; + } + + /* grab the next available node */ + n = get_child(pn, cindex); + if (!n) + continue; + + if (IS_TNODE(n)) { + /* record pn and cindex for leaf walking */ + pn = n; + cindex = 1ul << n->bits; + + continue; + } + + hlist_for_each_entry_safe(fa, tmp, &n->leaf, fa_list) { + /* if alias was cloned to local then we just + * need to remove the local copy from main + */ + if (tb->tb_id != fa->tb_id) { + hlist_del_rcu(&fa->fa_list); + alias_free_mem_rcu(fa); + continue; + } + + /* record local slen */ + slen = fa->fa_slen; + } + + /* update leaf slen */ + n->slen = slen; + + if (hlist_empty(&n->leaf)) { + put_child_root(pn, n->key, NULL); + node_free(n); + } + } +} + /* Caller must hold RTNL. */ int fib_table_flush(struct net *net, struct fib_table *tb) { From 3114cdfe66c156345b0ae34e2990472f277e0c1b Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Tue, 15 Nov 2016 05:46:12 -0500 Subject: [PATCH 681/792] ipv4: Fix memory leak in exception case for splitting tries Fix a small memory leak that can occur where we leak a fib_alias in the event of us not being able to insert it into the local table. Fixes: 0ddcf43d5d4a0 ("ipv4: FIB Local/MAIN table collapse") Reported-by: Eric Dumazet Signed-off-by: Alexander Duyck Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/fib_trie.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c index 735edc9d41a2..026f309c51e9 100644 --- a/net/ipv4/fib_trie.c +++ b/net/ipv4/fib_trie.c @@ -1743,8 +1743,10 @@ struct fib_table *fib_trie_unmerge(struct fib_table *oldtb) local_l = fib_find_node(lt, &local_tp, l->key); if (fib_insert_alias(lt, local_tp, local_l, new_fa, - NULL, l->key)) + NULL, l->key)) { + kmem_cache_free(fn_alias_kmem, new_fa); goto out; + } } /* stop loop if key wrapped back to 0 */ From 612e94bd99912f3b2ac616c00c3dc7f166a98005 Mon Sep 17 00:00:00 2001 From: Radha Mohan Chintakuntla Date: Tue, 15 Nov 2016 17:37:16 +0530 Subject: [PATCH 682/792] net: thunderx: Introduce BGX_ID_MASK macro to extract bgx_id This patch fixes the 'bgx_id' determination on 83xx where there are 4 BGX blocks instead of 2 on other platforms. Signed-off-by: Radha Mohan Chintakuntla Signed-off-by: Sunil Goutham Signed-off-by: David S. Miller --- drivers/net/ethernet/cavium/thunder/thunder_bgx.c | 4 ++-- drivers/net/ethernet/cavium/thunder/thunder_bgx.h | 2 ++ 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c index 8bbaedbb7b94..050e21fbb147 100644 --- a/drivers/net/ethernet/cavium/thunder/thunder_bgx.c +++ b/drivers/net/ethernet/cavium/thunder/thunder_bgx.c @@ -1242,8 +1242,8 @@ static int bgx_probe(struct pci_dev *pdev, const struct pci_device_id *ent) pci_read_config_word(pdev, PCI_DEVICE_ID, &sdevid); if (sdevid != PCI_DEVICE_ID_THUNDER_RGX) { - bgx->bgx_id = - (pci_resource_start(pdev, PCI_CFG_REG_BAR_NUM) >> 24) & 1; + bgx->bgx_id = (pci_resource_start(pdev, + PCI_CFG_REG_BAR_NUM) >> 24) & BGX_ID_MASK; bgx->bgx_id += nic_get_node_id(pdev) * MAX_BGX_PER_NODE; bgx->max_lmac = MAX_LMAC_PER_BGX; bgx_vnic[bgx->bgx_id] = bgx; diff --git a/drivers/net/ethernet/cavium/thunder/thunder_bgx.h b/drivers/net/ethernet/cavium/thunder/thunder_bgx.h index d59c71e4a000..01cc7c859131 100644 --- a/drivers/net/ethernet/cavium/thunder/thunder_bgx.h +++ b/drivers/net/ethernet/cavium/thunder/thunder_bgx.h @@ -28,6 +28,8 @@ #define MAX_DMAC_PER_LMAC 8 #define MAX_FRAME_SIZE 9216 +#define BGX_ID_MASK 0x3 + #define MAX_DMAC_PER_LMAC_TNS_BYPASS_MODE 2 /* Registers */ From 712c3185344050c591d78584542bd945e4f6f778 Mon Sep 17 00:00:00 2001 From: Sunil Goutham Date: Tue, 15 Nov 2016 17:37:36 +0530 Subject: [PATCH 683/792] net: thunderx: Program LMAC credits based on MTU Programming LMAC credits taking 9K frame size by default is incorrect as for an interface which is one of the many on the same BGX/QLM no of credits available will be less as Tx FIFO will be divided across all interfaces. So let's say a BGX with 40G interface and another BGX with multiple 10G, bandwidth of 10G interfaces will be effected when traffic is running on both 40G and 10G interfaces simultaneously. This patch fixes this issue by programming credits based on netdev's MTU. Also fixed configuring MTU to HW and added CQE counter for pkts which exceed this value. Signed-off-by: Sunil Goutham Signed-off-by: David S. Miller --- drivers/net/ethernet/cavium/thunder/nic.h | 3 +- .../net/ethernet/cavium/thunder/nic_main.c | 38 +++++++++++++------ drivers/net/ethernet/cavium/thunder/nic_reg.h | 1 + .../net/ethernet/cavium/thunder/nicvf_main.c | 38 ++++++++++--------- .../ethernet/cavium/thunder/nicvf_queues.c | 3 ++ .../ethernet/cavium/thunder/nicvf_queues.h | 2 + 6 files changed, 54 insertions(+), 31 deletions(-) diff --git a/drivers/net/ethernet/cavium/thunder/nic.h b/drivers/net/ethernet/cavium/thunder/nic.h index 30426109711c..cd2d379df5c5 100644 --- a/drivers/net/ethernet/cavium/thunder/nic.h +++ b/drivers/net/ethernet/cavium/thunder/nic.h @@ -47,7 +47,7 @@ /* Min/Max packet size */ #define NIC_HW_MIN_FRS 64 -#define NIC_HW_MAX_FRS 9200 /* 9216 max packet including FCS */ +#define NIC_HW_MAX_FRS 9190 /* Excluding L2 header and FCS */ /* Max pkinds */ #define NIC_MAX_PKIND 16 @@ -282,7 +282,6 @@ struct nicvf { u8 node; u8 cpi_alg; - u16 mtu; bool link_up; u8 duplex; u32 speed; diff --git a/drivers/net/ethernet/cavium/thunder/nic_main.c b/drivers/net/ethernet/cavium/thunder/nic_main.c index 2bbf4cbf08b2..85c9e6201e8b 100644 --- a/drivers/net/ethernet/cavium/thunder/nic_main.c +++ b/drivers/net/ethernet/cavium/thunder/nic_main.c @@ -11,6 +11,7 @@ #include #include #include +#include #include "nic_reg.h" #include "nic.h" @@ -260,18 +261,31 @@ static void nic_get_bgx_stats(struct nicpf *nic, struct bgx_stats_msg *bgx) /* Update hardware min/max frame size */ static int nic_update_hw_frs(struct nicpf *nic, int new_frs, int vf) { - if ((new_frs > NIC_HW_MAX_FRS) || (new_frs < NIC_HW_MIN_FRS)) { - dev_err(&nic->pdev->dev, - "Invalid MTU setting from VF%d rejected, should be between %d and %d\n", - vf, NIC_HW_MIN_FRS, NIC_HW_MAX_FRS); - return 1; - } - new_frs += ETH_HLEN; - if (new_frs <= nic->pkind.maxlen) - return 0; + int bgx, lmac, lmac_cnt; + u64 lmac_credits; - nic->pkind.maxlen = new_frs; - nic_reg_write(nic, NIC_PF_PKIND_0_15_CFG, *(u64 *)&nic->pkind); + if ((new_frs > NIC_HW_MAX_FRS) || (new_frs < NIC_HW_MIN_FRS)) + return 1; + + bgx = NIC_GET_BGX_FROM_VF_LMAC_MAP(nic->vf_lmac_map[vf]); + lmac = NIC_GET_LMAC_FROM_VF_LMAC_MAP(nic->vf_lmac_map[vf]); + lmac += bgx * MAX_LMAC_PER_BGX; + + new_frs += VLAN_ETH_HLEN + ETH_FCS_LEN + 4; + + /* Update corresponding LMAC credits */ + lmac_cnt = bgx_get_lmac_count(nic->node, bgx); + lmac_credits = nic_reg_read(nic, NIC_PF_LMAC_0_7_CREDIT + (lmac * 8)); + lmac_credits &= ~(0xFFFFFULL << 12); + lmac_credits |= (((((48 * 1024) / lmac_cnt) - new_frs) / 16) << 12); + nic_reg_write(nic, NIC_PF_LMAC_0_7_CREDIT + (lmac * 8), lmac_credits); + + /* Enforce MTU in HW + * This config is supported only from 88xx pass 2.0 onwards. + */ + if (!pass1_silicon(nic->pdev)) + nic_reg_write(nic, + NIC_PF_LMAC_0_7_CFG2 + (lmac * 8), new_frs); return 0; } @@ -464,7 +478,7 @@ static int nic_init_hw(struct nicpf *nic) /* PKIND configuration */ nic->pkind.minlen = 0; - nic->pkind.maxlen = NIC_HW_MAX_FRS + ETH_HLEN; + nic->pkind.maxlen = NIC_HW_MAX_FRS + VLAN_ETH_HLEN + ETH_FCS_LEN + 4; nic->pkind.lenerr_en = 1; nic->pkind.rx_hdr = 0; nic->pkind.hdr_sl = 0; diff --git a/drivers/net/ethernet/cavium/thunder/nic_reg.h b/drivers/net/ethernet/cavium/thunder/nic_reg.h index edf779f5a227..80d46337cf29 100644 --- a/drivers/net/ethernet/cavium/thunder/nic_reg.h +++ b/drivers/net/ethernet/cavium/thunder/nic_reg.h @@ -106,6 +106,7 @@ #define NIC_PF_MPI_0_2047_CFG (0x210000) #define NIC_PF_RSSI_0_4097_RQ (0x220000) #define NIC_PF_LMAC_0_7_CFG (0x240000) +#define NIC_PF_LMAC_0_7_CFG2 (0x240100) #define NIC_PF_LMAC_0_7_SW_XOFF (0x242000) #define NIC_PF_LMAC_0_7_CREDIT (0x244000) #define NIC_PF_CHAN_0_255_TX_CFG (0x400000) diff --git a/drivers/net/ethernet/cavium/thunder/nicvf_main.c b/drivers/net/ethernet/cavium/thunder/nicvf_main.c index 45a13f718863..8f833612da77 100644 --- a/drivers/net/ethernet/cavium/thunder/nicvf_main.c +++ b/drivers/net/ethernet/cavium/thunder/nicvf_main.c @@ -1189,6 +1189,17 @@ int nicvf_stop(struct net_device *netdev) return 0; } +static int nicvf_update_hw_max_frs(struct nicvf *nic, int mtu) +{ + union nic_mbx mbx = {}; + + mbx.frs.msg = NIC_MBOX_MSG_SET_MAX_FRS; + mbx.frs.max_frs = mtu; + mbx.frs.vf_id = nic->vf_id; + + return nicvf_send_msg_to_pf(nic, &mbx); +} + int nicvf_open(struct net_device *netdev) { int err, qidx; @@ -1196,8 +1207,6 @@ int nicvf_open(struct net_device *netdev) struct queue_set *qs = nic->qs; struct nicvf_cq_poll *cq_poll = NULL; - nic->mtu = netdev->mtu; - netif_carrier_off(netdev); err = nicvf_register_misc_interrupt(nic); @@ -1248,9 +1257,12 @@ int nicvf_open(struct net_device *netdev) if (nic->sqs_mode) nicvf_get_primary_vf_struct(nic); - /* Configure receive side scaling */ - if (!nic->sqs_mode) + /* Configure receive side scaling and MTU */ + if (!nic->sqs_mode) { nicvf_rss_init(nic); + if (nicvf_update_hw_max_frs(nic, netdev->mtu)) + goto cleanup; + } err = nicvf_register_interrupts(nic); if (err) @@ -1297,17 +1309,6 @@ napi_del: return err; } -static int nicvf_update_hw_max_frs(struct nicvf *nic, int mtu) -{ - union nic_mbx mbx = {}; - - mbx.frs.msg = NIC_MBOX_MSG_SET_MAX_FRS; - mbx.frs.max_frs = mtu; - mbx.frs.vf_id = nic->vf_id; - - return nicvf_send_msg_to_pf(nic, &mbx); -} - static int nicvf_change_mtu(struct net_device *netdev, int new_mtu) { struct nicvf *nic = netdev_priv(netdev); @@ -1318,10 +1319,13 @@ static int nicvf_change_mtu(struct net_device *netdev, int new_mtu) if (new_mtu < NIC_HW_MIN_FRS) return -EINVAL; + netdev->mtu = new_mtu; + + if (!netif_running(netdev)) + return 0; + if (nicvf_update_hw_max_frs(nic, new_mtu)) return -EINVAL; - netdev->mtu = new_mtu; - nic->mtu = new_mtu; return 0; } diff --git a/drivers/net/ethernet/cavium/thunder/nicvf_queues.c b/drivers/net/ethernet/cavium/thunder/nicvf_queues.c index a4fc50155881..f0e0ca61438e 100644 --- a/drivers/net/ethernet/cavium/thunder/nicvf_queues.c +++ b/drivers/net/ethernet/cavium/thunder/nicvf_queues.c @@ -1530,6 +1530,9 @@ int nicvf_check_cqe_tx_errs(struct nicvf *nic, case CQ_TX_ERROP_SUBDC_ERR: stats->tx.subdesc_err++; break; + case CQ_TX_ERROP_MAX_SIZE_VIOL: + stats->tx.max_size_exceeded++; + break; case CQ_TX_ERROP_IMM_SIZE_OFLOW: stats->tx.imm_size_oflow++; break; diff --git a/drivers/net/ethernet/cavium/thunder/nicvf_queues.h b/drivers/net/ethernet/cavium/thunder/nicvf_queues.h index 869f3386028b..8f4718edc0fe 100644 --- a/drivers/net/ethernet/cavium/thunder/nicvf_queues.h +++ b/drivers/net/ethernet/cavium/thunder/nicvf_queues.h @@ -158,6 +158,7 @@ enum CQ_TX_ERROP_E { CQ_TX_ERROP_DESC_FAULT = 0x10, CQ_TX_ERROP_HDR_CONS_ERR = 0x11, CQ_TX_ERROP_SUBDC_ERR = 0x12, + CQ_TX_ERROP_MAX_SIZE_VIOL = 0x13, CQ_TX_ERROP_IMM_SIZE_OFLOW = 0x80, CQ_TX_ERROP_DATA_SEQUENCE_ERR = 0x81, CQ_TX_ERROP_MEM_SEQUENCE_ERR = 0x82, @@ -177,6 +178,7 @@ struct cmp_queue_stats { u64 desc_fault; u64 hdr_cons_err; u64 subdesc_err; + u64 max_size_exceeded; u64 imm_size_oflow; u64 data_seq_err; u64 mem_seq_err; From cadcf95a4f70362c96a8fe39ff5d5df830d4db7f Mon Sep 17 00:00:00 2001 From: Sunil Goutham Date: Tue, 15 Nov 2016 17:37:54 +0530 Subject: [PATCH 684/792] net: thunderx: Fix configuration of L3/L4 length checking This patch fixes enabling of HW verification of L3/L4 length and TCP/UDP checksum which is currently being cleared. Also fixed VLAN stripping config which is being cleared when multiqset is enabled. Signed-off-by: Sunil Goutham Signed-off-by: David S. Miller --- drivers/net/ethernet/cavium/thunder/nicvf_queues.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/cavium/thunder/nicvf_queues.c b/drivers/net/ethernet/cavium/thunder/nicvf_queues.c index f0e0ca61438e..f914eef6573a 100644 --- a/drivers/net/ethernet/cavium/thunder/nicvf_queues.c +++ b/drivers/net/ethernet/cavium/thunder/nicvf_queues.c @@ -538,9 +538,12 @@ static void nicvf_rcv_queue_config(struct nicvf *nic, struct queue_set *qs, mbx.rq.cfg = (1ULL << 62) | (RQ_CQ_DROP << 8); nicvf_send_msg_to_pf(nic, &mbx); - nicvf_queue_reg_write(nic, NIC_QSET_RQ_GEN_CFG, 0, 0x00); - if (!nic->sqs_mode) + if (!nic->sqs_mode && (qidx == 0)) { + /* Enable checking L3/L4 length and TCP/UDP checksums */ + nicvf_queue_reg_write(nic, NIC_QSET_RQ_GEN_CFG, 0, + (BIT(24) | BIT(23) | BIT(21))); nicvf_config_vlan_stripping(nic, nic->netdev->features); + } /* Enable Receive queue */ memset(&rq_cfg, 0, sizeof(struct rq_cfg)); From 964cb69bdc9db255f7c3a80f6e1bed8a25e4c60e Mon Sep 17 00:00:00 2001 From: Sunil Goutham Date: Tue, 15 Nov 2016 17:38:16 +0530 Subject: [PATCH 685/792] net: thunderx: Fix VF driver's interface statistics This patch fixes multiple issues 1. Convert all driver statistics to percpu counters for accuracy. 2. To avoid multiple CQEs posted by a TSO packet appended to HW, TSO pkt's SQE has 'post_cqe' not set but a dummy SQE is added for getting HW transmit completion notification. This dummy SQE has 'dont_send' set and HW drops the pkt pointed to in this thus Tx drop counter increases. This patch fixes this by subtracting SW tx tso counter from HW Tx drop counter for actual packet drop counter. 3. Reset all individual queue's and VNIC HW stats when interface is going down. 4. Getrid off unnecessary counters in hot path. 5. Bringout all CQE error stats i.e both Rx and Tx. Signed-off-by: Sunil Goutham Signed-off-by: David S. Miller --- drivers/net/ethernet/cavium/thunder/nic.h | 59 +++++----- .../net/ethernet/cavium/thunder/nic_main.c | 1 + .../ethernet/cavium/thunder/nicvf_ethtool.c | 105 +++++++++-------- .../net/ethernet/cavium/thunder/nicvf_main.c | 106 +++++++++--------- .../ethernet/cavium/thunder/nicvf_queues.c | 96 ++++++++-------- .../ethernet/cavium/thunder/nicvf_queues.h | 24 +--- 6 files changed, 196 insertions(+), 195 deletions(-) diff --git a/drivers/net/ethernet/cavium/thunder/nic.h b/drivers/net/ethernet/cavium/thunder/nic.h index cd2d379df5c5..86bd93ce2ea3 100644 --- a/drivers/net/ethernet/cavium/thunder/nic.h +++ b/drivers/net/ethernet/cavium/thunder/nic.h @@ -178,11 +178,11 @@ enum tx_stats_reg_offset { struct nicvf_hw_stats { u64 rx_bytes; + u64 rx_frames; u64 rx_ucast_frames; u64 rx_bcast_frames; u64 rx_mcast_frames; - u64 rx_fcs_errors; - u64 rx_l2_errors; + u64 rx_drops; u64 rx_drop_red; u64 rx_drop_red_bytes; u64 rx_drop_overrun; @@ -191,6 +191,19 @@ struct nicvf_hw_stats { u64 rx_drop_mcast; u64 rx_drop_l3_bcast; u64 rx_drop_l3_mcast; + u64 rx_fcs_errors; + u64 rx_l2_errors; + + u64 tx_bytes; + u64 tx_frames; + u64 tx_ucast_frames; + u64 tx_bcast_frames; + u64 tx_mcast_frames; + u64 tx_drops; +}; + +struct nicvf_drv_stats { + /* CQE Rx errs */ u64 rx_bgx_truncated_pkts; u64 rx_jabber_errs; u64 rx_fcs_errs; @@ -216,34 +229,30 @@ struct nicvf_hw_stats { u64 rx_l4_pclp; u64 rx_truncated_pkts; - u64 tx_bytes_ok; - u64 tx_ucast_frames_ok; - u64 tx_bcast_frames_ok; - u64 tx_mcast_frames_ok; - u64 tx_drops; -}; - -struct nicvf_drv_stats { - /* Rx */ - u64 rx_frames_ok; - u64 rx_frames_64; - u64 rx_frames_127; - u64 rx_frames_255; - u64 rx_frames_511; - u64 rx_frames_1023; - u64 rx_frames_1518; - u64 rx_frames_jumbo; - u64 rx_drops; + /* CQE Tx errs */ + u64 tx_desc_fault; + u64 tx_hdr_cons_err; + u64 tx_subdesc_err; + u64 tx_max_size_exceeded; + u64 tx_imm_size_oflow; + u64 tx_data_seq_err; + u64 tx_mem_seq_err; + u64 tx_lock_viol; + u64 tx_data_fault; + u64 tx_tstmp_conflict; + u64 tx_tstmp_timeout; + u64 tx_mem_fault; + u64 tx_csum_overlap; + u64 tx_csum_overflow; + /* driver debug stats */ u64 rcv_buffer_alloc_failures; - - /* Tx */ - u64 tx_frames_ok; - u64 tx_drops; u64 tx_tso; u64 tx_timeout; u64 txq_stop; u64 txq_wake; + + struct u64_stats_sync syncp; }; struct nicvf { @@ -297,7 +306,7 @@ struct nicvf { /* Stats */ struct nicvf_hw_stats hw_stats; - struct nicvf_drv_stats drv_stats; + struct nicvf_drv_stats __percpu *drv_stats; struct bgx_stats bgx_stats; /* MSI-X */ diff --git a/drivers/net/ethernet/cavium/thunder/nic_main.c b/drivers/net/ethernet/cavium/thunder/nic_main.c index 85c9e6201e8b..6677b96e1f3f 100644 --- a/drivers/net/ethernet/cavium/thunder/nic_main.c +++ b/drivers/net/ethernet/cavium/thunder/nic_main.c @@ -851,6 +851,7 @@ static int nic_reset_stat_counters(struct nicpf *nic, nic_reg_write(nic, reg_addr, 0); } } + return 0; } diff --git a/drivers/net/ethernet/cavium/thunder/nicvf_ethtool.c b/drivers/net/ethernet/cavium/thunder/nicvf_ethtool.c index ad4fddb55421..432bf6be57cb 100644 --- a/drivers/net/ethernet/cavium/thunder/nicvf_ethtool.c +++ b/drivers/net/ethernet/cavium/thunder/nicvf_ethtool.c @@ -36,11 +36,11 @@ struct nicvf_stat { static const struct nicvf_stat nicvf_hw_stats[] = { NICVF_HW_STAT(rx_bytes), + NICVF_HW_STAT(rx_frames), NICVF_HW_STAT(rx_ucast_frames), NICVF_HW_STAT(rx_bcast_frames), NICVF_HW_STAT(rx_mcast_frames), - NICVF_HW_STAT(rx_fcs_errors), - NICVF_HW_STAT(rx_l2_errors), + NICVF_HW_STAT(rx_drops), NICVF_HW_STAT(rx_drop_red), NICVF_HW_STAT(rx_drop_red_bytes), NICVF_HW_STAT(rx_drop_overrun), @@ -49,50 +49,59 @@ static const struct nicvf_stat nicvf_hw_stats[] = { NICVF_HW_STAT(rx_drop_mcast), NICVF_HW_STAT(rx_drop_l3_bcast), NICVF_HW_STAT(rx_drop_l3_mcast), - NICVF_HW_STAT(rx_bgx_truncated_pkts), - NICVF_HW_STAT(rx_jabber_errs), - NICVF_HW_STAT(rx_fcs_errs), - NICVF_HW_STAT(rx_bgx_errs), - NICVF_HW_STAT(rx_prel2_errs), - NICVF_HW_STAT(rx_l2_hdr_malformed), - NICVF_HW_STAT(rx_oversize), - NICVF_HW_STAT(rx_undersize), - NICVF_HW_STAT(rx_l2_len_mismatch), - NICVF_HW_STAT(rx_l2_pclp), - NICVF_HW_STAT(rx_ip_ver_errs), - NICVF_HW_STAT(rx_ip_csum_errs), - NICVF_HW_STAT(rx_ip_hdr_malformed), - NICVF_HW_STAT(rx_ip_payload_malformed), - NICVF_HW_STAT(rx_ip_ttl_errs), - NICVF_HW_STAT(rx_l3_pclp), - NICVF_HW_STAT(rx_l4_malformed), - NICVF_HW_STAT(rx_l4_csum_errs), - NICVF_HW_STAT(rx_udp_len_errs), - NICVF_HW_STAT(rx_l4_port_errs), - NICVF_HW_STAT(rx_tcp_flag_errs), - NICVF_HW_STAT(rx_tcp_offset_errs), - NICVF_HW_STAT(rx_l4_pclp), - NICVF_HW_STAT(rx_truncated_pkts), - NICVF_HW_STAT(tx_bytes_ok), - NICVF_HW_STAT(tx_ucast_frames_ok), - NICVF_HW_STAT(tx_bcast_frames_ok), - NICVF_HW_STAT(tx_mcast_frames_ok), + NICVF_HW_STAT(rx_fcs_errors), + NICVF_HW_STAT(rx_l2_errors), + NICVF_HW_STAT(tx_bytes), + NICVF_HW_STAT(tx_frames), + NICVF_HW_STAT(tx_ucast_frames), + NICVF_HW_STAT(tx_bcast_frames), + NICVF_HW_STAT(tx_mcast_frames), + NICVF_HW_STAT(tx_drops), }; static const struct nicvf_stat nicvf_drv_stats[] = { - NICVF_DRV_STAT(rx_frames_ok), - NICVF_DRV_STAT(rx_frames_64), - NICVF_DRV_STAT(rx_frames_127), - NICVF_DRV_STAT(rx_frames_255), - NICVF_DRV_STAT(rx_frames_511), - NICVF_DRV_STAT(rx_frames_1023), - NICVF_DRV_STAT(rx_frames_1518), - NICVF_DRV_STAT(rx_frames_jumbo), - NICVF_DRV_STAT(rx_drops), + NICVF_DRV_STAT(rx_bgx_truncated_pkts), + NICVF_DRV_STAT(rx_jabber_errs), + NICVF_DRV_STAT(rx_fcs_errs), + NICVF_DRV_STAT(rx_bgx_errs), + NICVF_DRV_STAT(rx_prel2_errs), + NICVF_DRV_STAT(rx_l2_hdr_malformed), + NICVF_DRV_STAT(rx_oversize), + NICVF_DRV_STAT(rx_undersize), + NICVF_DRV_STAT(rx_l2_len_mismatch), + NICVF_DRV_STAT(rx_l2_pclp), + NICVF_DRV_STAT(rx_ip_ver_errs), + NICVF_DRV_STAT(rx_ip_csum_errs), + NICVF_DRV_STAT(rx_ip_hdr_malformed), + NICVF_DRV_STAT(rx_ip_payload_malformed), + NICVF_DRV_STAT(rx_ip_ttl_errs), + NICVF_DRV_STAT(rx_l3_pclp), + NICVF_DRV_STAT(rx_l4_malformed), + NICVF_DRV_STAT(rx_l4_csum_errs), + NICVF_DRV_STAT(rx_udp_len_errs), + NICVF_DRV_STAT(rx_l4_port_errs), + NICVF_DRV_STAT(rx_tcp_flag_errs), + NICVF_DRV_STAT(rx_tcp_offset_errs), + NICVF_DRV_STAT(rx_l4_pclp), + NICVF_DRV_STAT(rx_truncated_pkts), + + NICVF_DRV_STAT(tx_desc_fault), + NICVF_DRV_STAT(tx_hdr_cons_err), + NICVF_DRV_STAT(tx_subdesc_err), + NICVF_DRV_STAT(tx_max_size_exceeded), + NICVF_DRV_STAT(tx_imm_size_oflow), + NICVF_DRV_STAT(tx_data_seq_err), + NICVF_DRV_STAT(tx_mem_seq_err), + NICVF_DRV_STAT(tx_lock_viol), + NICVF_DRV_STAT(tx_data_fault), + NICVF_DRV_STAT(tx_tstmp_conflict), + NICVF_DRV_STAT(tx_tstmp_timeout), + NICVF_DRV_STAT(tx_mem_fault), + NICVF_DRV_STAT(tx_csum_overlap), + NICVF_DRV_STAT(tx_csum_overflow), + NICVF_DRV_STAT(rcv_buffer_alloc_failures), - NICVF_DRV_STAT(tx_frames_ok), NICVF_DRV_STAT(tx_tso), - NICVF_DRV_STAT(tx_drops), NICVF_DRV_STAT(tx_timeout), NICVF_DRV_STAT(txq_stop), NICVF_DRV_STAT(txq_wake), @@ -278,8 +287,8 @@ static void nicvf_get_ethtool_stats(struct net_device *netdev, struct ethtool_stats *stats, u64 *data) { struct nicvf *nic = netdev_priv(netdev); - int stat; - int sqs; + int stat, tmp_stats; + int sqs, cpu; nicvf_update_stats(nic); @@ -289,9 +298,13 @@ static void nicvf_get_ethtool_stats(struct net_device *netdev, for (stat = 0; stat < nicvf_n_hw_stats; stat++) *(data++) = ((u64 *)&nic->hw_stats) [nicvf_hw_stats[stat].index]; - for (stat = 0; stat < nicvf_n_drv_stats; stat++) - *(data++) = ((u64 *)&nic->drv_stats) - [nicvf_drv_stats[stat].index]; + for (stat = 0; stat < nicvf_n_drv_stats; stat++) { + tmp_stats = 0; + for_each_possible_cpu(cpu) + tmp_stats += ((u64 *)per_cpu_ptr(nic->drv_stats, cpu)) + [nicvf_drv_stats[stat].index]; + *(data++) = tmp_stats; + } nicvf_get_qset_stats(nic, stats, &data); diff --git a/drivers/net/ethernet/cavium/thunder/nicvf_main.c b/drivers/net/ethernet/cavium/thunder/nicvf_main.c index 8f833612da77..9dc79c0578d8 100644 --- a/drivers/net/ethernet/cavium/thunder/nicvf_main.c +++ b/drivers/net/ethernet/cavium/thunder/nicvf_main.c @@ -69,25 +69,6 @@ static inline u8 nicvf_netdev_qidx(struct nicvf *nic, u8 qidx) return qidx; } -static inline void nicvf_set_rx_frame_cnt(struct nicvf *nic, - struct sk_buff *skb) -{ - if (skb->len <= 64) - nic->drv_stats.rx_frames_64++; - else if (skb->len <= 127) - nic->drv_stats.rx_frames_127++; - else if (skb->len <= 255) - nic->drv_stats.rx_frames_255++; - else if (skb->len <= 511) - nic->drv_stats.rx_frames_511++; - else if (skb->len <= 1023) - nic->drv_stats.rx_frames_1023++; - else if (skb->len <= 1518) - nic->drv_stats.rx_frames_1518++; - else - nic->drv_stats.rx_frames_jumbo++; -} - /* The Cavium ThunderX network controller can *only* be found in SoCs * containing the ThunderX ARM64 CPU implementation. All accesses to the device * registers on this platform are implicitly strongly ordered with respect @@ -514,7 +495,6 @@ static int nicvf_init_resources(struct nicvf *nic) } static void nicvf_snd_pkt_handler(struct net_device *netdev, - struct cmp_queue *cq, struct cqe_send_t *cqe_tx, int cqe_type, int budget, unsigned int *tx_pkts, unsigned int *tx_bytes) @@ -536,7 +516,7 @@ static void nicvf_snd_pkt_handler(struct net_device *netdev, __func__, cqe_tx->sq_qs, cqe_tx->sq_idx, cqe_tx->sqe_ptr, hdr->subdesc_cnt); - nicvf_check_cqe_tx_errs(nic, cq, cqe_tx); + nicvf_check_cqe_tx_errs(nic, cqe_tx); skb = (struct sk_buff *)sq->skbuff[cqe_tx->sqe_ptr]; if (skb) { /* Check for dummy descriptor used for HW TSO offload on 88xx */ @@ -630,8 +610,6 @@ static void nicvf_rcv_pkt_handler(struct net_device *netdev, return; } - nicvf_set_rx_frame_cnt(nic, skb); - nicvf_set_rxhash(netdev, cqe_rx, skb); skb_record_rx_queue(skb, rq_idx); @@ -703,7 +681,7 @@ loop: work_done++; break; case CQE_TYPE_SEND: - nicvf_snd_pkt_handler(netdev, cq, + nicvf_snd_pkt_handler(netdev, (void *)cq_desc, CQE_TYPE_SEND, budget, &tx_pkts, &tx_bytes); tx_done++; @@ -740,7 +718,7 @@ done: nic = nic->pnicvf; if (netif_tx_queue_stopped(txq) && netif_carrier_ok(netdev)) { netif_tx_start_queue(txq); - nic->drv_stats.txq_wake++; + this_cpu_inc(nic->drv_stats->txq_wake); if (netif_msg_tx_err(nic)) netdev_warn(netdev, "%s: Transmit queue wakeup SQ%d\n", @@ -1084,7 +1062,7 @@ static netdev_tx_t nicvf_xmit(struct sk_buff *skb, struct net_device *netdev) if (!netif_tx_queue_stopped(txq) && !nicvf_sq_append_skb(nic, skb)) { netif_tx_stop_queue(txq); - nic->drv_stats.txq_stop++; + this_cpu_inc(nic->drv_stats->txq_stop); if (netif_msg_tx_err(nic)) netdev_warn(netdev, "%s: Transmit ring full, stopping SQ%d\n", @@ -1202,7 +1180,7 @@ static int nicvf_update_hw_max_frs(struct nicvf *nic, int mtu) int nicvf_open(struct net_device *netdev) { - int err, qidx; + int cpu, err, qidx; struct nicvf *nic = netdev_priv(netdev); struct queue_set *qs = nic->qs; struct nicvf_cq_poll *cq_poll = NULL; @@ -1262,6 +1240,11 @@ int nicvf_open(struct net_device *netdev) nicvf_rss_init(nic); if (nicvf_update_hw_max_frs(nic, netdev->mtu)) goto cleanup; + + /* Clear percpu stats */ + for_each_possible_cpu(cpu) + memset(per_cpu_ptr(nic->drv_stats, cpu), 0, + sizeof(struct nicvf_drv_stats)); } err = nicvf_register_interrupts(nic); @@ -1288,9 +1271,6 @@ int nicvf_open(struct net_device *netdev) for (qidx = 0; qidx < qs->rbdr_cnt; qidx++) nicvf_enable_intr(nic, NICVF_INTR_RBDR, qidx); - nic->drv_stats.txq_stop = 0; - nic->drv_stats.txq_wake = 0; - return 0; cleanup: nicvf_disable_intr(nic, NICVF_INTR_MBOX, 0); @@ -1383,9 +1363,10 @@ void nicvf_update_lmac_stats(struct nicvf *nic) void nicvf_update_stats(struct nicvf *nic) { - int qidx; + int qidx, cpu; + u64 tmp_stats = 0; struct nicvf_hw_stats *stats = &nic->hw_stats; - struct nicvf_drv_stats *drv_stats = &nic->drv_stats; + struct nicvf_drv_stats *drv_stats; struct queue_set *qs = nic->qs; #define GET_RX_STATS(reg) \ @@ -1408,21 +1389,33 @@ void nicvf_update_stats(struct nicvf *nic) stats->rx_drop_l3_bcast = GET_RX_STATS(RX_DRP_L3BCAST); stats->rx_drop_l3_mcast = GET_RX_STATS(RX_DRP_L3MCAST); - stats->tx_bytes_ok = GET_TX_STATS(TX_OCTS); - stats->tx_ucast_frames_ok = GET_TX_STATS(TX_UCAST); - stats->tx_bcast_frames_ok = GET_TX_STATS(TX_BCAST); - stats->tx_mcast_frames_ok = GET_TX_STATS(TX_MCAST); + stats->tx_bytes = GET_TX_STATS(TX_OCTS); + stats->tx_ucast_frames = GET_TX_STATS(TX_UCAST); + stats->tx_bcast_frames = GET_TX_STATS(TX_BCAST); + stats->tx_mcast_frames = GET_TX_STATS(TX_MCAST); stats->tx_drops = GET_TX_STATS(TX_DROP); - drv_stats->tx_frames_ok = stats->tx_ucast_frames_ok + - stats->tx_bcast_frames_ok + - stats->tx_mcast_frames_ok; - drv_stats->rx_frames_ok = stats->rx_ucast_frames + - stats->rx_bcast_frames + - stats->rx_mcast_frames; - drv_stats->rx_drops = stats->rx_drop_red + - stats->rx_drop_overrun; - drv_stats->tx_drops = stats->tx_drops; + /* On T88 pass 2.0, the dummy SQE added for TSO notification + * via CQE has 'dont_send' set. Hence HW drops the pkt pointed + * pointed by dummy SQE and results in tx_drops counter being + * incremented. Subtracting it from tx_tso counter will give + * exact tx_drops counter. + */ + if (nic->t88 && nic->hw_tso) { + for_each_possible_cpu(cpu) { + drv_stats = per_cpu_ptr(nic->drv_stats, cpu); + tmp_stats += drv_stats->tx_tso; + } + stats->tx_drops = tmp_stats - stats->tx_drops; + } + stats->tx_frames = stats->tx_ucast_frames + + stats->tx_bcast_frames + + stats->tx_mcast_frames; + stats->rx_frames = stats->rx_ucast_frames + + stats->rx_bcast_frames + + stats->rx_mcast_frames; + stats->rx_drops = stats->rx_drop_red + + stats->rx_drop_overrun; /* Update RQ and SQ stats */ for (qidx = 0; qidx < qs->rq_cnt; qidx++) @@ -1436,18 +1429,17 @@ static struct rtnl_link_stats64 *nicvf_get_stats64(struct net_device *netdev, { struct nicvf *nic = netdev_priv(netdev); struct nicvf_hw_stats *hw_stats = &nic->hw_stats; - struct nicvf_drv_stats *drv_stats = &nic->drv_stats; nicvf_update_stats(nic); stats->rx_bytes = hw_stats->rx_bytes; - stats->rx_packets = drv_stats->rx_frames_ok; - stats->rx_dropped = drv_stats->rx_drops; + stats->rx_packets = hw_stats->rx_frames; + stats->rx_dropped = hw_stats->rx_drops; stats->multicast = hw_stats->rx_mcast_frames; - stats->tx_bytes = hw_stats->tx_bytes_ok; - stats->tx_packets = drv_stats->tx_frames_ok; - stats->tx_dropped = drv_stats->tx_drops; + stats->tx_bytes = hw_stats->tx_bytes; + stats->tx_packets = hw_stats->tx_frames; + stats->tx_dropped = hw_stats->tx_drops; return stats; } @@ -1460,7 +1452,7 @@ static void nicvf_tx_timeout(struct net_device *dev) netdev_warn(dev, "%s: Transmit timed out, resetting\n", dev->name); - nic->drv_stats.tx_timeout++; + this_cpu_inc(nic->drv_stats->tx_timeout); schedule_work(&nic->reset_task); } @@ -1594,6 +1586,12 @@ static int nicvf_probe(struct pci_dev *pdev, const struct pci_device_id *ent) goto err_free_netdev; } + nic->drv_stats = netdev_alloc_pcpu_stats(struct nicvf_drv_stats); + if (!nic->drv_stats) { + err = -ENOMEM; + goto err_free_netdev; + } + err = nicvf_set_qset_resources(nic); if (err) goto err_free_netdev; @@ -1652,6 +1650,8 @@ err_unregister_interrupts: nicvf_unregister_interrupts(nic); err_free_netdev: pci_set_drvdata(pdev, NULL); + if (nic->drv_stats) + free_percpu(nic->drv_stats); free_netdev(netdev); err_release_regions: pci_release_regions(pdev); @@ -1679,6 +1679,8 @@ static void nicvf_remove(struct pci_dev *pdev) unregister_netdev(pnetdev); nicvf_unregister_interrupts(nic); pci_set_drvdata(pdev, NULL); + if (nic->drv_stats) + free_percpu(nic->drv_stats); free_netdev(netdev); pci_release_regions(pdev); pci_disable_device(pdev); diff --git a/drivers/net/ethernet/cavium/thunder/nicvf_queues.c b/drivers/net/ethernet/cavium/thunder/nicvf_queues.c index f914eef6573a..bdce5915baae 100644 --- a/drivers/net/ethernet/cavium/thunder/nicvf_queues.c +++ b/drivers/net/ethernet/cavium/thunder/nicvf_queues.c @@ -104,7 +104,8 @@ static inline int nicvf_alloc_rcv_buffer(struct nicvf *nic, gfp_t gfp, nic->rb_page = alloc_pages(gfp | __GFP_COMP | __GFP_NOWARN, order); if (!nic->rb_page) { - nic->drv_stats.rcv_buffer_alloc_failures++; + this_cpu_inc(nic->pnicvf->drv_stats-> + rcv_buffer_alloc_failures); return -ENOMEM; } nic->rb_page_offset = 0; @@ -483,9 +484,12 @@ static void nicvf_reset_rcv_queue_stats(struct nicvf *nic) { union nic_mbx mbx = {}; - /* Reset all RXQ's stats */ + /* Reset all RQ/SQ and VF stats */ mbx.reset_stat.msg = NIC_MBOX_MSG_RESET_STAT_COUNTER; + mbx.reset_stat.rx_stat_mask = 0x3FFF; + mbx.reset_stat.tx_stat_mask = 0x1F; mbx.reset_stat.rq_stat_mask = 0xFFFF; + mbx.reset_stat.sq_stat_mask = 0xFFFF; nicvf_send_msg_to_pf(nic, &mbx); } @@ -1032,7 +1036,7 @@ nicvf_sq_add_hdr_subdesc(struct nicvf *nic, struct snd_queue *sq, int qentry, hdr->tso_max_paysize = skb_shinfo(skb)->gso_size; /* For non-tunneled pkts, point this to L2 ethertype */ hdr->inner_l3_offset = skb_network_offset(skb) - 2; - nic->drv_stats.tx_tso++; + this_cpu_inc(nic->pnicvf->drv_stats->tx_tso); } } @@ -1164,7 +1168,7 @@ static int nicvf_sq_append_tso(struct nicvf *nic, struct snd_queue *sq, nicvf_sq_doorbell(nic, skb, sq_num, desc_cnt); - nic->drv_stats.tx_tso++; + this_cpu_inc(nic->pnicvf->drv_stats->tx_tso); return 1; } @@ -1425,8 +1429,6 @@ void nicvf_update_sq_stats(struct nicvf *nic, int sq_idx) /* Check for errors in the receive cmp.queue entry */ int nicvf_check_cqe_rx_errs(struct nicvf *nic, struct cqe_rx_t *cqe_rx) { - struct nicvf_hw_stats *stats = &nic->hw_stats; - if (!cqe_rx->err_level && !cqe_rx->err_opcode) return 0; @@ -1438,76 +1440,76 @@ int nicvf_check_cqe_rx_errs(struct nicvf *nic, struct cqe_rx_t *cqe_rx) switch (cqe_rx->err_opcode) { case CQ_RX_ERROP_RE_PARTIAL: - stats->rx_bgx_truncated_pkts++; + this_cpu_inc(nic->drv_stats->rx_bgx_truncated_pkts); break; case CQ_RX_ERROP_RE_JABBER: - stats->rx_jabber_errs++; + this_cpu_inc(nic->drv_stats->rx_jabber_errs); break; case CQ_RX_ERROP_RE_FCS: - stats->rx_fcs_errs++; + this_cpu_inc(nic->drv_stats->rx_fcs_errs); break; case CQ_RX_ERROP_RE_RX_CTL: - stats->rx_bgx_errs++; + this_cpu_inc(nic->drv_stats->rx_bgx_errs); break; case CQ_RX_ERROP_PREL2_ERR: - stats->rx_prel2_errs++; + this_cpu_inc(nic->drv_stats->rx_prel2_errs); break; case CQ_RX_ERROP_L2_MAL: - stats->rx_l2_hdr_malformed++; + this_cpu_inc(nic->drv_stats->rx_l2_hdr_malformed); break; case CQ_RX_ERROP_L2_OVERSIZE: - stats->rx_oversize++; + this_cpu_inc(nic->drv_stats->rx_oversize); break; case CQ_RX_ERROP_L2_UNDERSIZE: - stats->rx_undersize++; + this_cpu_inc(nic->drv_stats->rx_undersize); break; case CQ_RX_ERROP_L2_LENMISM: - stats->rx_l2_len_mismatch++; + this_cpu_inc(nic->drv_stats->rx_l2_len_mismatch); break; case CQ_RX_ERROP_L2_PCLP: - stats->rx_l2_pclp++; + this_cpu_inc(nic->drv_stats->rx_l2_pclp); break; case CQ_RX_ERROP_IP_NOT: - stats->rx_ip_ver_errs++; + this_cpu_inc(nic->drv_stats->rx_ip_ver_errs); break; case CQ_RX_ERROP_IP_CSUM_ERR: - stats->rx_ip_csum_errs++; + this_cpu_inc(nic->drv_stats->rx_ip_csum_errs); break; case CQ_RX_ERROP_IP_MAL: - stats->rx_ip_hdr_malformed++; + this_cpu_inc(nic->drv_stats->rx_ip_hdr_malformed); break; case CQ_RX_ERROP_IP_MALD: - stats->rx_ip_payload_malformed++; + this_cpu_inc(nic->drv_stats->rx_ip_payload_malformed); break; case CQ_RX_ERROP_IP_HOP: - stats->rx_ip_ttl_errs++; + this_cpu_inc(nic->drv_stats->rx_ip_ttl_errs); break; case CQ_RX_ERROP_L3_PCLP: - stats->rx_l3_pclp++; + this_cpu_inc(nic->drv_stats->rx_l3_pclp); break; case CQ_RX_ERROP_L4_MAL: - stats->rx_l4_malformed++; + this_cpu_inc(nic->drv_stats->rx_l4_malformed); break; case CQ_RX_ERROP_L4_CHK: - stats->rx_l4_csum_errs++; + this_cpu_inc(nic->drv_stats->rx_l4_csum_errs); break; case CQ_RX_ERROP_UDP_LEN: - stats->rx_udp_len_errs++; + this_cpu_inc(nic->drv_stats->rx_udp_len_errs); break; case CQ_RX_ERROP_L4_PORT: - stats->rx_l4_port_errs++; + this_cpu_inc(nic->drv_stats->rx_l4_port_errs); break; case CQ_RX_ERROP_TCP_FLAG: - stats->rx_tcp_flag_errs++; + this_cpu_inc(nic->drv_stats->rx_tcp_flag_errs); break; case CQ_RX_ERROP_TCP_OFFSET: - stats->rx_tcp_offset_errs++; + this_cpu_inc(nic->drv_stats->rx_tcp_offset_errs); break; case CQ_RX_ERROP_L4_PCLP: - stats->rx_l4_pclp++; + this_cpu_inc(nic->drv_stats->rx_l4_pclp); break; case CQ_RX_ERROP_RBDR_TRUNC: - stats->rx_truncated_pkts++; + this_cpu_inc(nic->drv_stats->rx_truncated_pkts); break; } @@ -1515,56 +1517,52 @@ int nicvf_check_cqe_rx_errs(struct nicvf *nic, struct cqe_rx_t *cqe_rx) } /* Check for errors in the send cmp.queue entry */ -int nicvf_check_cqe_tx_errs(struct nicvf *nic, - struct cmp_queue *cq, struct cqe_send_t *cqe_tx) +int nicvf_check_cqe_tx_errs(struct nicvf *nic, struct cqe_send_t *cqe_tx) { - struct cmp_queue_stats *stats = &cq->stats; - switch (cqe_tx->send_status) { case CQ_TX_ERROP_GOOD: - stats->tx.good++; return 0; case CQ_TX_ERROP_DESC_FAULT: - stats->tx.desc_fault++; + this_cpu_inc(nic->drv_stats->tx_desc_fault); break; case CQ_TX_ERROP_HDR_CONS_ERR: - stats->tx.hdr_cons_err++; + this_cpu_inc(nic->drv_stats->tx_hdr_cons_err); break; case CQ_TX_ERROP_SUBDC_ERR: - stats->tx.subdesc_err++; + this_cpu_inc(nic->drv_stats->tx_subdesc_err); break; case CQ_TX_ERROP_MAX_SIZE_VIOL: - stats->tx.max_size_exceeded++; + this_cpu_inc(nic->drv_stats->tx_max_size_exceeded); break; case CQ_TX_ERROP_IMM_SIZE_OFLOW: - stats->tx.imm_size_oflow++; + this_cpu_inc(nic->drv_stats->tx_imm_size_oflow); break; case CQ_TX_ERROP_DATA_SEQUENCE_ERR: - stats->tx.data_seq_err++; + this_cpu_inc(nic->drv_stats->tx_data_seq_err); break; case CQ_TX_ERROP_MEM_SEQUENCE_ERR: - stats->tx.mem_seq_err++; + this_cpu_inc(nic->drv_stats->tx_mem_seq_err); break; case CQ_TX_ERROP_LOCK_VIOL: - stats->tx.lock_viol++; + this_cpu_inc(nic->drv_stats->tx_lock_viol); break; case CQ_TX_ERROP_DATA_FAULT: - stats->tx.data_fault++; + this_cpu_inc(nic->drv_stats->tx_data_fault); break; case CQ_TX_ERROP_TSTMP_CONFLICT: - stats->tx.tstmp_conflict++; + this_cpu_inc(nic->drv_stats->tx_tstmp_conflict); break; case CQ_TX_ERROP_TSTMP_TIMEOUT: - stats->tx.tstmp_timeout++; + this_cpu_inc(nic->drv_stats->tx_tstmp_timeout); break; case CQ_TX_ERROP_MEM_FAULT: - stats->tx.mem_fault++; + this_cpu_inc(nic->drv_stats->tx_mem_fault); break; case CQ_TX_ERROP_CK_OVERLAP: - stats->tx.csum_overlap++; + this_cpu_inc(nic->drv_stats->tx_csum_overlap); break; case CQ_TX_ERROP_CK_OFLOW: - stats->tx.csum_overflow++; + this_cpu_inc(nic->drv_stats->tx_csum_overflow); break; } diff --git a/drivers/net/ethernet/cavium/thunder/nicvf_queues.h b/drivers/net/ethernet/cavium/thunder/nicvf_queues.h index 8f4718edc0fe..2e3c940c1093 100644 --- a/drivers/net/ethernet/cavium/thunder/nicvf_queues.h +++ b/drivers/net/ethernet/cavium/thunder/nicvf_queues.h @@ -172,26 +172,6 @@ enum CQ_TX_ERROP_E { CQ_TX_ERROP_ENUM_LAST = 0x8a, }; -struct cmp_queue_stats { - struct tx_stats { - u64 good; - u64 desc_fault; - u64 hdr_cons_err; - u64 subdesc_err; - u64 max_size_exceeded; - u64 imm_size_oflow; - u64 data_seq_err; - u64 mem_seq_err; - u64 lock_viol; - u64 data_fault; - u64 tstmp_conflict; - u64 tstmp_timeout; - u64 mem_fault; - u64 csum_overlap; - u64 csum_overflow; - } tx; -} ____cacheline_aligned_in_smp; - enum RQ_SQ_STATS { RQ_SQ_STATS_OCTS, RQ_SQ_STATS_PKTS, @@ -243,7 +223,6 @@ struct cmp_queue { spinlock_t lock; /* lock to serialize processing CQEs */ void *desc; struct q_desc_mem dmem; - struct cmp_queue_stats stats; int irq; } ____cacheline_aligned_in_smp; @@ -338,6 +317,5 @@ u64 nicvf_queue_reg_read(struct nicvf *nic, void nicvf_update_rq_stats(struct nicvf *nic, int rq_idx); void nicvf_update_sq_stats(struct nicvf *nic, int sq_idx); int nicvf_check_cqe_rx_errs(struct nicvf *nic, struct cqe_rx_t *cqe_rx); -int nicvf_check_cqe_tx_errs(struct nicvf *nic, - struct cmp_queue *cq, struct cqe_send_t *cqe_tx); +int nicvf_check_cqe_tx_errs(struct nicvf *nic, struct cqe_send_t *cqe_tx); #endif /* NICVF_QUEUES_H */ From c94acf805d93e7beb5898ac97ff327ae0b6f04dd Mon Sep 17 00:00:00 2001 From: Sunil Goutham Date: Tue, 15 Nov 2016 17:38:29 +0530 Subject: [PATCH 686/792] net: thunderx: Fix memory leak and other issues upon interface toggle This patch fixes the following 1. When interface is being teardown and queues are being cleaned up, free pending SKBs that are in SQ which are either not transmitted or freed as NAPI is disabled by that time. 2. While interface initialization, delay CFG_DONE notification till the end to avoid corner cases where TXQs are enabled but CQ interrupts are not which results blocking transmission and kicking off watchdog. 3. Check for IFF_UP while re-enabling RBDR interrupts from tasklet. Signed-off-by: Sunil Goutham Signed-off-by: David S. Miller --- drivers/net/ethernet/cavium/thunder/nicvf_main.c | 11 +++++------ drivers/net/ethernet/cavium/thunder/nicvf_queues.c | 14 +++++++++++++- 2 files changed, 18 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/cavium/thunder/nicvf_main.c b/drivers/net/ethernet/cavium/thunder/nicvf_main.c index 9dc79c0578d8..8a37012c9c89 100644 --- a/drivers/net/ethernet/cavium/thunder/nicvf_main.c +++ b/drivers/net/ethernet/cavium/thunder/nicvf_main.c @@ -473,9 +473,6 @@ int nicvf_set_real_num_queues(struct net_device *netdev, static int nicvf_init_resources(struct nicvf *nic) { int err; - union nic_mbx mbx = {}; - - mbx.msg.msg = NIC_MBOX_MSG_CFG_DONE; /* Enable Qset */ nicvf_qset_config(nic, true); @@ -488,9 +485,6 @@ static int nicvf_init_resources(struct nicvf *nic) return err; } - /* Send VF config done msg to PF */ - nicvf_write_to_mbx(nic, &mbx); - return 0; } @@ -1184,6 +1178,7 @@ int nicvf_open(struct net_device *netdev) struct nicvf *nic = netdev_priv(netdev); struct queue_set *qs = nic->qs; struct nicvf_cq_poll *cq_poll = NULL; + union nic_mbx mbx = {}; netif_carrier_off(netdev); @@ -1271,6 +1266,10 @@ int nicvf_open(struct net_device *netdev) for (qidx = 0; qidx < qs->rbdr_cnt; qidx++) nicvf_enable_intr(nic, NICVF_INTR_RBDR, qidx); + /* Send VF config done msg to PF */ + mbx.msg.msg = NIC_MBOX_MSG_CFG_DONE; + nicvf_write_to_mbx(nic, &mbx); + return 0; cleanup: nicvf_disable_intr(nic, NICVF_INTR_MBOX, 0); diff --git a/drivers/net/ethernet/cavium/thunder/nicvf_queues.c b/drivers/net/ethernet/cavium/thunder/nicvf_queues.c index bdce5915baae..747ef0882976 100644 --- a/drivers/net/ethernet/cavium/thunder/nicvf_queues.c +++ b/drivers/net/ethernet/cavium/thunder/nicvf_queues.c @@ -271,7 +271,8 @@ refill: rbdr_idx, new_rb); next_rbdr: /* Re-enable RBDR interrupts only if buffer allocation is success */ - if (!nic->rb_alloc_fail && rbdr->enable) + if (!nic->rb_alloc_fail && rbdr->enable && + netif_running(nic->pnicvf->netdev)) nicvf_enable_intr(nic, NICVF_INTR_RBDR, rbdr_idx); if (rbdr_idx) @@ -362,6 +363,8 @@ static int nicvf_init_snd_queue(struct nicvf *nic, static void nicvf_free_snd_queue(struct nicvf *nic, struct snd_queue *sq) { + struct sk_buff *skb; + if (!sq) return; if (!sq->dmem.base) @@ -372,6 +375,15 @@ static void nicvf_free_snd_queue(struct nicvf *nic, struct snd_queue *sq) sq->dmem.q_len * TSO_HEADER_SIZE, sq->tso_hdrs, sq->tso_hdrs_phys); + /* Free pending skbs in the queue */ + smp_rmb(); + while (sq->head != sq->tail) { + skb = (struct sk_buff *)sq->skbuff[sq->head]; + if (skb) + dev_kfree_skb_any(skb); + sq->head++; + sq->head &= (sq->dmem.q_len - 1); + } kfree(sq->skbuff); nicvf_free_q_desc_mem(nic, &sq->dmem); } From 3ca0b51decf780ce6277b088a9f28cd6fb71e372 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 16 Nov 2016 11:02:00 -0800 Subject: [PATCH 687/792] clk: berlin: Pass correct type to hw provider registration Dan Carpenter reports that we're passing a pointer to a pointer here when we should just be passing a pointer. Pass the right pointer so that the of_clk_hw_onecell_get() sees the appropriate data pointer on its end. Reported-by: Dan Carpenter Cc: Jisheng Zhang Cc: Alexandre Belloni Cc: Sebastian Hesselbarth Cc: Stephen Boyd Fixes: f6475e298297 ("clk: berlin: Migrate to clk_hw based registration and OF APIs") Signed-off-by: Stephen Boyd --- drivers/clk/berlin/bg2.c | 2 +- drivers/clk/berlin/bg2q.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/clk/berlin/bg2.c b/drivers/clk/berlin/bg2.c index edf3b96b3b73..1d99292e2039 100644 --- a/drivers/clk/berlin/bg2.c +++ b/drivers/clk/berlin/bg2.c @@ -685,7 +685,7 @@ static void __init berlin2_clock_setup(struct device_node *np) } /* register clk-provider */ - of_clk_add_hw_provider(np, of_clk_hw_onecell_get, &clk_data); + of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_data); return; diff --git a/drivers/clk/berlin/bg2q.c b/drivers/clk/berlin/bg2q.c index 0718e831475f..3b784b593afd 100644 --- a/drivers/clk/berlin/bg2q.c +++ b/drivers/clk/berlin/bg2q.c @@ -382,7 +382,7 @@ static void __init berlin2q_clock_setup(struct device_node *np) } /* register clk-provider */ - of_clk_add_hw_provider(np, of_clk_hw_onecell_get, &clk_data); + of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_data); return; From bdfdabfedc30c9574dde6198a1739d2be03bf934 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 16 Nov 2016 11:02:00 -0800 Subject: [PATCH 688/792] clk: efm32gg: Pass correct type to hw provider registration MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Dan Carpenter reports that we're passing a pointer to a pointer here when we should just be passing a pointer. Pass the right pointer so that the of_clk_hw_onecell_get() sees the appropriate data pointer on its end. Reported-by: Dan Carpenter Cc: Stephen Boyd Cc: Uwe Kleine-König Fixes: 9337631f52a8 ("clk: efm32gg: Migrate to clk_hw based OF and registration APIs") Signed-off-by: Stephen Boyd --- drivers/clk/clk-efm32gg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/clk-efm32gg.c b/drivers/clk/clk-efm32gg.c index 8802a2dd56ac..f674778fb3ac 100644 --- a/drivers/clk/clk-efm32gg.c +++ b/drivers/clk/clk-efm32gg.c @@ -82,6 +82,6 @@ static void __init efm32gg_cmu_init(struct device_node *np) hws[clk_HFPERCLKDAC0] = clk_hw_register_gate(NULL, "HFPERCLK.DAC0", "HFXO", 0, base + CMU_HFPERCLKEN0, 17, 0, NULL); - of_clk_add_hw_provider(np, of_clk_hw_onecell_get, &clk_data); + of_clk_add_hw_provider(np, of_clk_hw_onecell_get, clk_data); } CLK_OF_DECLARE(efm32ggcmu, "efm32gg,cmu", efm32gg_cmu_init); From d48756228ee9161ac8836b346589a43fabdc9f3c Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Tue, 15 Nov 2016 15:56:26 -0500 Subject: [PATCH 689/792] nvme/pci: Don't free queues on error The nvme_remove function tears down all allocated resources in the correct order, so no need to free queues on error during initialization. This fixes possible use-after-free errors when queues are still associated with a blk-mq hctx. Reported-by: Scott Bauer Tested-by: Scott Bauer Signed-off-by: Keith Busch Reviewed-by: Sagi Grimberg Reviewed-by: Christoph Hellwig Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe --- drivers/nvme/host/pci.c | 18 ++++-------------- 1 file changed, 4 insertions(+), 14 deletions(-) diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index 0248d0e21fee..5e52034ab010 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -1242,20 +1242,16 @@ static int nvme_configure_admin_queue(struct nvme_dev *dev) result = nvme_enable_ctrl(&dev->ctrl, cap); if (result) - goto free_nvmeq; + return result; nvmeq->cq_vector = 0; result = queue_request_irq(nvmeq); if (result) { nvmeq->cq_vector = -1; - goto free_nvmeq; + return result; } return result; - - free_nvmeq: - nvme_free_queues(dev, 0); - return result; } static bool nvme_should_reset(struct nvme_dev *dev, u32 csts) @@ -1317,10 +1313,8 @@ static int nvme_create_io_queues(struct nvme_dev *dev) max = min(dev->max_qid, dev->queue_count - 1); for (i = dev->online_queues; i <= max; i++) { ret = nvme_create_queue(dev->queues[i], i); - if (ret) { - nvme_free_queues(dev, i); + if (ret) break; - } } /* @@ -1460,13 +1454,9 @@ static int nvme_setup_io_queues(struct nvme_dev *dev) result = queue_request_irq(adminq); if (result) { adminq->cq_vector = -1; - goto free_queues; + return result; } return nvme_create_io_queues(dev); - - free_queues: - nvme_free_queues(dev, 1); - return result; } static void nvme_del_queue_end(struct request *req, int error) From f9c22ec6c1c511285dc539b83aabdabdb6baf245 Mon Sep 17 00:00:00 2001 From: Keno Fischer Date: Tue, 15 Nov 2016 17:39:02 -0500 Subject: [PATCH 690/792] gpio: Remove GPIO_DEVRES option This option was added in 6a89a314ab107a12af08c71420c19a37a30fc2d3 to allow use of the devm_gpio_* functions without CONFIG_GPIOLIB. However, only a few months later in b69ac52449c658b7ac40034dc3c5f5f4a71a723d, CONFIG_GPIOLIB was added as a dependency, defeating the original purpose of this option. Instead of that patch, the original commit could have just been reverted (and in fact was partially so in 403c1d0be5ccbd750d25c59d8358843a81e52e3b). Further, since this option has a dependency on HAS_IOMEM, even though it does not require it, it causes build failures when !HAS_IOMEM (e.g. in a uml build). Fix that by completely removing the option, in essence completing the reversion of the original commit. Signed-off-by: Keno Fischer Signed-off-by: Linus Walleij --- drivers/gpio/Kconfig | 4 ---- drivers/gpio/Makefile | 2 +- 2 files changed, 1 insertion(+), 5 deletions(-) diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index d011cb89d25e..ed37e5908b91 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -22,10 +22,6 @@ menuconfig GPIOLIB if GPIOLIB -config GPIO_DEVRES - def_bool y - depends on HAS_IOMEM - config OF_GPIO def_bool y depends on OF diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index ab28a2daeacc..d074c2299393 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -2,7 +2,7 @@ ccflags-$(CONFIG_DEBUG_GPIO) += -DDEBUG -obj-$(CONFIG_GPIO_DEVRES) += devres.o +obj-$(CONFIG_GPIOLIB) += devres.o obj-$(CONFIG_GPIOLIB) += gpiolib.o obj-$(CONFIG_GPIOLIB) += gpiolib-legacy.o obj-$(CONFIG_OF_GPIO) += gpiolib-of.o From 963abe5c8a0273a1cf5913556da1b1189de0e57a Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 15 Nov 2016 22:24:12 -0800 Subject: [PATCH 691/792] virtio-net: add a missing synchronize_net() It seems many drivers do not respect napi_hash_del() contract. When napi_hash_del() is used before netif_napi_del(), an RCU grace period is needed before freeing NAPI object. Fixes: 91815639d880 ("virtio-net: rx busy polling support") Signed-off-by: Eric Dumazet Cc: Jason Wang Cc: Michael S. Tsirkin Acked-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index fd8b1e62301f..7276d5a95bd0 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -1497,6 +1497,11 @@ static void virtnet_free_queues(struct virtnet_info *vi) netif_napi_del(&vi->rq[i].napi); } + /* We called napi_hash_del() before netif_napi_del(), + * we need to respect an RCU grace period before freeing vi->rq + */ + synchronize_net(); + kfree(vi->rq); kfree(vi->sq); } From d5a4b1a540b8a9a44888b383472a80b84765aaa0 Mon Sep 17 00:00:00 2001 From: Lv Zheng Date: Wed, 16 Nov 2016 17:27:34 +0800 Subject: [PATCH 692/792] tools/power/acpi: Remove direct kernel source include reference Avoid breaking cross-compiled ACPI tools builds by rearranging the handling of kernel header files. This patch also contains OUTPUT/srctree cleanups in order to make above fix working for various build environments. Fixes: e323c02dee59 (ACPICA: MSVC9: Fix inclusion order issue) Reported-and-tested-by: Yisheng Xie Reported-by: Andy Shevchenko Signed-off-by: Lv Zheng [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki --- include/acpi/platform/aclinux.h | 3 ++ tools/power/acpi/Makefile.config | 23 +++++++------- tools/power/acpi/Makefile.rules | 40 ++++++++++++++++-------- tools/power/acpi/tools/acpidbg/Makefile | 4 +-- tools/power/acpi/tools/acpidbg/acpidbg.c | 8 ++++- tools/power/acpi/tools/acpidump/Makefile | 12 +++---- 6 files changed, 56 insertions(+), 34 deletions(-) diff --git a/include/acpi/platform/aclinux.h b/include/acpi/platform/aclinux.h index a5d98d171866..e861a24f06f2 100644 --- a/include/acpi/platform/aclinux.h +++ b/include/acpi/platform/aclinux.h @@ -191,6 +191,9 @@ #ifndef __init #define __init #endif +#ifndef __iomem +#define __iomem +#endif /* Host-dependent types and defines for user-space ACPICA */ diff --git a/tools/power/acpi/Makefile.config b/tools/power/acpi/Makefile.config index a538ff44b108..a1883bbb0144 100644 --- a/tools/power/acpi/Makefile.config +++ b/tools/power/acpi/Makefile.config @@ -8,18 +8,19 @@ # as published by the Free Software Foundation; version 2 # of the License. -include ../../../../scripts/Makefile.include +ifeq ($(srctree),) +srctree := $(patsubst %/,%,$(dir $(shell pwd))) +srctree := $(patsubst %/,%,$(dir $(srctree))) +#$(info Determined 'srctree' to be $(srctree)) +endif -OUTPUT=./ +include $(srctree)/../../scripts/Makefile.include + +OUTPUT=$(srctree)/ ifeq ("$(origin O)", "command line") - OUTPUT := $(O)/ -endif - -ifneq ($(OUTPUT),) -# check that the output directory actually exists -OUTDIR := $(shell cd $(OUTPUT) && /bin/pwd) -$(if $(OUTDIR),, $(error output directory "$(OUTPUT)" does not exist)) + OUTPUT := $(O)/power/acpi/ endif +#$(info Determined 'OUTPUT' to be $(OUTPUT)) # --- CONFIGURATION BEGIN --- @@ -70,8 +71,8 @@ WARNINGS := -Wall WARNINGS += $(call cc-supports,-Wstrict-prototypes) WARNINGS += $(call cc-supports,-Wdeclaration-after-statement) -KERNEL_INCLUDE := ../../../include -ACPICA_INCLUDE := ../../../drivers/acpi/acpica +KERNEL_INCLUDE := $(OUTPUT)include +ACPICA_INCLUDE := $(srctree)/../../../drivers/acpi/acpica CFLAGS += -D_LINUX -I$(KERNEL_INCLUDE) -I$(ACPICA_INCLUDE) CFLAGS += $(WARNINGS) diff --git a/tools/power/acpi/Makefile.rules b/tools/power/acpi/Makefile.rules index ec87a9e562c0..373738338f51 100644 --- a/tools/power/acpi/Makefile.rules +++ b/tools/power/acpi/Makefile.rules @@ -8,28 +8,42 @@ # as published by the Free Software Foundation; version 2 # of the License. -$(OUTPUT)$(TOOL): $(TOOL_OBJS) FORCE - $(ECHO) " LD " $@ - $(QUIET) $(LD) $(CFLAGS) $(LDFLAGS) $(TOOL_OBJS) -L$(OUTPUT) -o $@ +objdir := $(OUTPUT)tools/$(TOOL)/ +toolobjs := $(addprefix $(objdir),$(TOOL_OBJS)) +$(OUTPUT)$(TOOL): $(toolobjs) FORCE + $(ECHO) " LD " $(subst $(OUTPUT),,$@) + $(QUIET) $(LD) $(CFLAGS) $(LDFLAGS) $(toolobjs) -L$(OUTPUT) -o $@ + $(ECHO) " STRIP " $(subst $(OUTPUT),,$@) $(QUIET) $(STRIPCMD) $@ -$(OUTPUT)%.o: %.c - $(ECHO) " CC " $@ +$(KERNEL_INCLUDE): + $(ECHO) " MKDIR " $(subst $(OUTPUT),,$@) + $(QUIET) mkdir -p $(KERNEL_INCLUDE) + $(ECHO) " CP " $(subst $(OUTPUT),,$@) + $(QUIET) cp -rf $(srctree)/../../../include/acpi $(KERNEL_INCLUDE)/ + +$(objdir)%.o: %.c $(KERNEL_INCLUDE) + $(ECHO) " CC " $(subst $(OUTPUT),,$@) $(QUIET) $(CC) -c $(CFLAGS) -o $@ $< all: $(OUTPUT)$(TOOL) clean: - -find $(OUTPUT) \( -not -type d \) \ - -and \( -name '*~' -o -name '*.[oas]' \) \ - -type f -print \ - | xargs rm -f - -rm -f $(OUTPUT)$(TOOL) + $(ECHO) " RMOBJ " $(subst $(OUTPUT),,$(objdir)) + $(QUIET) find $(objdir) \( -not -type d \)\ + -and \( -name '*~' -o -name '*.[oas]' \)\ + -type f -print | xargs rm -f + $(ECHO) " RM " $(TOOL) + $(QUIET) rm -f $(OUTPUT)$(TOOL) + $(ECHO) " RMINC " $(subst $(OUTPUT),,$(KERNEL_INCLUDE)) + $(QUIET) rm -rf $(KERNEL_INCLUDE) install-tools: - $(INSTALL) -d $(DESTDIR)${sbindir} - $(INSTALL_PROGRAM) $(OUTPUT)$(TOOL) $(DESTDIR)${sbindir} + $(ECHO) " INST " $(TOOL) + $(QUIET) $(INSTALL) -d $(DESTDIR)$(sbindir) + $(QUIET) $(INSTALL_PROGRAM) $(OUTPUT)$(TOOL) $(DESTDIR)$(sbindir) uninstall-tools: - - rm -f $(DESTDIR)${sbindir}/$(TOOL) + $(ECHO) " UNINST " $(TOOL) + $(QUIET) rm -f $(DESTDIR)$(sbindir)/$(TOOL) install: all install-tools $(EXTRA_INSTALL) uninstall: uninstall-tools $(EXTRA_UNINSTALL) diff --git a/tools/power/acpi/tools/acpidbg/Makefile b/tools/power/acpi/tools/acpidbg/Makefile index 352df4b41ae9..f2d06e773eb4 100644 --- a/tools/power/acpi/tools/acpidbg/Makefile +++ b/tools/power/acpi/tools/acpidbg/Makefile @@ -17,9 +17,7 @@ vpath %.c \ ../../os_specific/service_layers\ . CFLAGS += -DACPI_APPLICATION -DACPI_SINGLE_THREAD -DACPI_DEBUGGER\ - -I.\ - -I../../../../../drivers/acpi/acpica\ - -I../../../../../include + -I. LDFLAGS += -lpthread TOOL_OBJS = \ acpidbg.o diff --git a/tools/power/acpi/tools/acpidbg/acpidbg.c b/tools/power/acpi/tools/acpidbg/acpidbg.c index a88ac45b7756..4308362d7068 100644 --- a/tools/power/acpi/tools/acpidbg/acpidbg.c +++ b/tools/power/acpi/tools/acpidbg/acpidbg.c @@ -12,10 +12,16 @@ #include /* Headers not included by include/acpi/platform/aclinux.h */ +#include +#include +#include +#include +#include #include #include #include -#include +#include +#include "../../../../../include/linux/circ_buf.h" #define ACPI_AML_FILE "/sys/kernel/debug/acpi/acpidbg" #define ACPI_AML_SEC_TICK 1 diff --git a/tools/power/acpi/tools/acpidump/Makefile b/tools/power/acpi/tools/acpidump/Makefile index 04b5db7c7c0b..f7c7af1f9258 100644 --- a/tools/power/acpi/tools/acpidump/Makefile +++ b/tools/power/acpi/tools/acpidump/Makefile @@ -19,9 +19,7 @@ vpath %.c \ ./\ ../../common\ ../../os_specific/service_layers -CFLAGS += -DACPI_DUMP_APP -I.\ - -I../../../../../drivers/acpi/acpica\ - -I../../../../../include +CFLAGS += -DACPI_DUMP_APP -I. TOOL_OBJS = \ apdump.o\ apfiles.o\ @@ -49,7 +47,9 @@ TOOL_OBJS = \ include ../../Makefile.rules -install-man: ../../man/acpidump.8 - $(INSTALL_DATA) -D $< $(DESTDIR)${mandir}/man8/acpidump.8 +install-man: $(srctree)/man/acpidump.8 + $(ECHO) " INST " acpidump.8 + $(QUIET) $(INSTALL_DATA) -D $< $(DESTDIR)$(mandir)/man8/acpidump.8 uninstall-man: - - rm -f $(DESTDIR)${mandir}/man8/acpidump.8 + $(ECHO) " UNINST " acpidump.8 + $(QUIET) rm -f $(DESTDIR)$(mandir)/man8/acpidump.8 From ea339343d64a14594d882ccb52e8619d42defe5e Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 16 Nov 2016 06:12:42 -0800 Subject: [PATCH 693/792] be2net: do not call napi_hash_del() Calling napi_hash_del() before netif_napi_del() is dangerous if a synchronize_rcu() is not enforced before NAPI struct freeing. Lets leave this detail to core networking stack and feel more comfortable. Signed-off-by: Eric Dumazet Cc: Sathya Perla Cc: Ajit Khaparde Cc: Sriharsha Basavapatna Cc: Somnath Kotur Signed-off-by: David S. Miller --- drivers/net/ethernet/emulex/benet/be_main.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index cece8a08edca..93aa2939142a 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -2813,7 +2813,6 @@ static void be_evt_queues_destroy(struct be_adapter *adapter) if (eqo->q.created) { be_eq_clean(eqo); be_cmd_q_destroy(adapter, &eqo->q, QTYPE_EQ); - napi_hash_del(&eqo->napi); netif_napi_del(&eqo->napi); free_cpumask_var(eqo->affinity_mask); } From 5f00a8d8a2c2fd99528ab1a3632f0e77f4d25202 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 16 Nov 2016 06:19:02 -0800 Subject: [PATCH 694/792] cxgb4: do not call napi_hash_del() Calling napi_hash_del() before netif_napi_del() is dangerous if a synchronize_rcu() is not enforced before NAPI struct freeing. Lets leave this detail to core networking stack and feel more comfortable. Signed-off-by: Eric Dumazet Cc: Hariprasad S Signed-off-by: David S. Miller --- drivers/net/ethernet/chelsio/cxgb4/sge.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/ethernet/chelsio/cxgb4/sge.c b/drivers/net/ethernet/chelsio/cxgb4/sge.c index 1e74fd6085df..e19a0ca8e5dd 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/sge.c +++ b/drivers/net/ethernet/chelsio/cxgb4/sge.c @@ -2951,7 +2951,6 @@ void free_rspq_fl(struct adapter *adap, struct sge_rspq *rq, rq->cntxt_id, fl_id, 0xffff); dma_free_coherent(adap->pdev_dev, (rq->size + 1) * rq->iqe_len, rq->desc, rq->phys_addr); - napi_hash_del(&rq->napi); netif_napi_del(&rq->napi); rq->netdev = NULL; rq->cntxt_id = rq->abs_id = 0; From 955e16026d08a601d02b961d13b6db9d6c13c8c9 Mon Sep 17 00:00:00 2001 From: Alex Date: Wed, 16 Nov 2016 01:02:33 -0800 Subject: [PATCH 695/792] net/phy/vitesse: Configure RGMII skew on VSC8601, if needed With RGMII, we need a 1.5 to 2ns skew between clock and data lines. The VSC8601 can handle this internally. While the VSC8601 can set more fine-grained delays, the standard skew settings work out of the box. The same heuristic is used to determine when this skew should be enabled as in vsc824x_config_init(). Tested on custom board with AM3352 SOC and VSC801 PHY. Signed-off-by: Alexandru Gagniuc Signed-off-by: David S. Miller --- drivers/net/phy/vitesse.c | 34 +++++++++++++++++++++++++++++++++- 1 file changed, 33 insertions(+), 1 deletion(-) diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c index 2e37eb337d48..24b4a09468dd 100644 --- a/drivers/net/phy/vitesse.c +++ b/drivers/net/phy/vitesse.c @@ -62,6 +62,10 @@ /* Vitesse Extended Page Access Register */ #define MII_VSC82X4_EXT_PAGE_ACCESS 0x1f +/* Vitesse VSC8601 Extended PHY Control Register 1 */ +#define MII_VSC8601_EPHY_CTL 0x17 +#define MII_VSC8601_EPHY_CTL_RGMII_SKEW (1 << 8) + #define PHY_ID_VSC8234 0x000fc620 #define PHY_ID_VSC8244 0x000fc6c0 #define PHY_ID_VSC8514 0x00070670 @@ -111,6 +115,34 @@ static int vsc824x_config_init(struct phy_device *phydev) return err; } +/* This adds a skew for both TX and RX clocks, so the skew should only be + * applied to "rgmii-id" interfaces. It may not work as expected + * on "rgmii-txid", "rgmii-rxid" or "rgmii" interfaces. */ +static int vsc8601_add_skew(struct phy_device *phydev) +{ + int ret; + + ret = phy_read(phydev, MII_VSC8601_EPHY_CTL); + if (ret < 0) + return ret; + + ret |= MII_VSC8601_EPHY_CTL_RGMII_SKEW; + return phy_write(phydev, MII_VSC8601_EPHY_CTL, ret); +} + +static int vsc8601_config_init(struct phy_device *phydev) +{ + int ret = 0; + + if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) + ret = vsc8601_add_skew(phydev); + + if (ret < 0) + return ret; + + return genphy_config_init(phydev); +} + static int vsc824x_ack_interrupt(struct phy_device *phydev) { int err = 0; @@ -275,7 +307,7 @@ static struct phy_driver vsc82xx_driver[] = { .phy_id_mask = 0x000ffff0, .features = PHY_GBIT_FEATURES, .flags = PHY_HAS_INTERRUPT, - .config_init = &genphy_config_init, + .config_init = &vsc8601_config_init, .config_aneg = &genphy_config_aneg, .read_status = &genphy_read_status, .ack_interrupt = &vsc824x_ack_interrupt, From 2a3811068fbc6bf09bb09d166b65394b091c1085 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 16 Nov 2016 23:51:19 +0000 Subject: [PATCH 696/792] ARM: Fix XIP kernels Commit 7619751f8c90 ("ARM: 8595/2: apply more __ro_after_init") caused a regression with XIP kernels by moving the __ro_after_init data into the read-only section. With XIP kernels, the read-only section is located in read-only memory from the very beginning. Work around this by moving the __ro_after_init data back into the .data section, which will be in RAM, and hence will be writable. It should be noted that in doing so, this remains writable after init. Fixes: 7619751f8c90 ("ARM: 8595/2: apply more __ro_after_init") Reported-by: Andrea Merello Tested-by: Andrea Merello [ XIP stm32 ] Tested-by: Alexandre Torgue Signed-off-by: Russell King --- arch/arm/kernel/vmlinux-xip.lds.S | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/kernel/vmlinux-xip.lds.S b/arch/arm/kernel/vmlinux-xip.lds.S index 7fa487ef7e2f..37b2a11af345 100644 --- a/arch/arm/kernel/vmlinux-xip.lds.S +++ b/arch/arm/kernel/vmlinux-xip.lds.S @@ -3,6 +3,9 @@ * Written by Martin Mares */ +/* No __ro_after_init data in the .rodata section - which will always be ro */ +#define RO_AFTER_INIT_DATA + #include #include #include @@ -223,6 +226,8 @@ SECTIONS . = ALIGN(PAGE_SIZE); __init_end = .; + *(.data..ro_after_init) + NOSAVE_DATA CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES) READ_MOSTLY_DATA(L1_CACHE_BYTES) From 5b810a242c28e1d8d64d718cebe75b79d86a0b2d Mon Sep 17 00:00:00 2001 From: Tariq Toukan Date: Thu, 27 Oct 2016 16:36:26 +0300 Subject: [PATCH 697/792] IB/uverbs: Fix leak of XRC target QPs The real QP is destroyed in case of the ref count reaches zero, but for XRC target QPs this call was missed and caused to QP leaks. Let's call to destroy for all flows. Fixes: 0e0ec7e0638e ('RDMA/core: Export ib_open_qp() to share XRC...') Signed-off-by: Tariq Toukan Signed-off-by: Noa Osherovich Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/core/uverbs_main.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c index 0012fa58c105..44b1104eb168 100644 --- a/drivers/infiniband/core/uverbs_main.c +++ b/drivers/infiniband/core/uverbs_main.c @@ -262,12 +262,9 @@ static int ib_uverbs_cleanup_ucontext(struct ib_uverbs_file *file, container_of(uobj, struct ib_uqp_object, uevent.uobject); idr_remove_uobj(&ib_uverbs_qp_idr, uobj); - if (qp != qp->real_qp) { - ib_close_qp(qp); - } else { + if (qp == qp->real_qp) ib_uverbs_detach_umcast(qp, uqp); - ib_destroy_qp(qp); - } + ib_destroy_qp(qp); ib_uverbs_release_uevent(file, &uqp->uevent); kfree(uqp); } From 9db0ff53cb9b43ed75bacd42a89c1a0ab048b2b0 Mon Sep 17 00:00:00 2001 From: Mark Bloch Date: Thu, 27 Oct 2016 16:36:27 +0300 Subject: [PATCH 698/792] IB/cm: Mark stale CM id's whenever the mad agent was unregistered When there is a CM id object that has port assigned to it, it means that the cm-id asked for the specific port that it should go by it, but if that port was removed (hot-unplug event) the cm-id was not updated. In order to fix that the port keeps a list of all the cm-id's that are planning to go by it, whenever the port is removed it marks all of them as invalid. This commit fixes a kernel panic which happens when running traffic between guests and we force reboot a guest mid traffic, it triggers a kernel panic: Call Trace: [] ? panic+0xa7/0x16f [] ? oops_end+0xe4/0x100 [] ? no_context+0xfb/0x260 [] ? del_timer_sync+0x22/0x30 [] ? __bad_area_nosemaphore+0x125/0x1e0 [] ? process_timeout+0x0/0x10 [] ? bad_area_nosemaphore+0x13/0x20 [] ? __do_page_fault+0x31f/0x480 [] ? default_wake_function+0x0/0x20 [] ? free_msg+0x55/0x70 [mlx5_core] [] ? cmd_exec+0x124/0x840 [mlx5_core] [] ? find_busiest_group+0x244/0x9f0 [] ? do_page_fault+0x3e/0xa0 [] ? page_fault+0x25/0x30 [] ? cm_alloc_msg+0x35/0xc0 [ib_cm] [] ? ib_send_cm_dreq+0xb1/0x1e0 [ib_cm] [] ? cm_destroy_id+0x176/0x320 [ib_cm] [] ? ib_destroy_cm_id+0x10/0x20 [ib_cm] [] ? ipoib_cm_free_rx_reap_list+0xa7/0x110 [ib_ipoib] [] ? ipoib_cm_rx_reap+0x0/0x20 [ib_ipoib] [] ? ipoib_cm_rx_reap+0x15/0x20 [ib_ipoib] [] ? worker_thread+0x170/0x2a0 [] ? autoremove_wake_function+0x0/0x40 [] ? worker_thread+0x0/0x2a0 [] ? kthread+0x96/0xa0 [] ? child_rip+0xa/0x20 [] ? kthread+0x0/0xa0 [] ? child_rip+0x0/0x20 Fixes: a977049dacde ("[PATCH] IB: Add the kernel CM implementation") Signed-off-by: Mark Bloch Signed-off-by: Erez Shitrit Reviewed-by: Maor Gottlieb Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/core/cm.c | 126 ++++++++++++++++++++++++++++++----- 1 file changed, 110 insertions(+), 16 deletions(-) diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c index c99525512b34..71c7c4c328ef 100644 --- a/drivers/infiniband/core/cm.c +++ b/drivers/infiniband/core/cm.c @@ -80,6 +80,8 @@ static struct ib_cm { __be32 random_id_operand; struct list_head timewait_list; struct workqueue_struct *wq; + /* Sync on cm change port state */ + spinlock_t state_lock; } cm; /* Counter indexes ordered by attribute ID */ @@ -161,6 +163,8 @@ struct cm_port { struct ib_mad_agent *mad_agent; struct kobject port_obj; u8 port_num; + struct list_head cm_priv_prim_list; + struct list_head cm_priv_altr_list; struct cm_counter_group counter_group[CM_COUNTER_GROUPS]; }; @@ -241,6 +245,12 @@ struct cm_id_private { u8 service_timeout; u8 target_ack_delay; + struct list_head prim_list; + struct list_head altr_list; + /* Indicates that the send port mad is registered and av is set */ + int prim_send_port_not_ready; + int altr_send_port_not_ready; + struct list_head work_list; atomic_t work_count; }; @@ -259,20 +269,47 @@ static int cm_alloc_msg(struct cm_id_private *cm_id_priv, struct ib_mad_agent *mad_agent; struct ib_mad_send_buf *m; struct ib_ah *ah; + struct cm_av *av; + unsigned long flags, flags2; + int ret = 0; + /* don't let the port to be released till the agent is down */ + spin_lock_irqsave(&cm.state_lock, flags2); + spin_lock_irqsave(&cm.lock, flags); + if (!cm_id_priv->prim_send_port_not_ready) + av = &cm_id_priv->av; + else if (!cm_id_priv->altr_send_port_not_ready && + (cm_id_priv->alt_av.port)) + av = &cm_id_priv->alt_av; + else { + pr_info("%s: not valid CM id\n", __func__); + ret = -ENODEV; + spin_unlock_irqrestore(&cm.lock, flags); + goto out; + } + spin_unlock_irqrestore(&cm.lock, flags); + /* Make sure the port haven't released the mad yet */ mad_agent = cm_id_priv->av.port->mad_agent; - ah = ib_create_ah(mad_agent->qp->pd, &cm_id_priv->av.ah_attr); - if (IS_ERR(ah)) - return PTR_ERR(ah); + if (!mad_agent) { + pr_info("%s: not a valid MAD agent\n", __func__); + ret = -ENODEV; + goto out; + } + ah = ib_create_ah(mad_agent->qp->pd, &av->ah_attr); + if (IS_ERR(ah)) { + ret = PTR_ERR(ah); + goto out; + } m = ib_create_send_mad(mad_agent, cm_id_priv->id.remote_cm_qpn, - cm_id_priv->av.pkey_index, + av->pkey_index, 0, IB_MGMT_MAD_HDR, IB_MGMT_MAD_DATA, GFP_ATOMIC, IB_MGMT_BASE_VERSION); if (IS_ERR(m)) { ib_destroy_ah(ah); - return PTR_ERR(m); + ret = PTR_ERR(m); + goto out; } /* Timeout set by caller if response is expected. */ @@ -282,7 +319,10 @@ static int cm_alloc_msg(struct cm_id_private *cm_id_priv, atomic_inc(&cm_id_priv->refcount); m->context[0] = cm_id_priv; *msg = m; - return 0; + +out: + spin_unlock_irqrestore(&cm.state_lock, flags2); + return ret; } static int cm_alloc_response_msg(struct cm_port *port, @@ -352,7 +392,8 @@ static void cm_init_av_for_response(struct cm_port *port, struct ib_wc *wc, grh, &av->ah_attr); } -static int cm_init_av_by_path(struct ib_sa_path_rec *path, struct cm_av *av) +static int cm_init_av_by_path(struct ib_sa_path_rec *path, struct cm_av *av, + struct cm_id_private *cm_id_priv) { struct cm_device *cm_dev; struct cm_port *port = NULL; @@ -387,7 +428,17 @@ static int cm_init_av_by_path(struct ib_sa_path_rec *path, struct cm_av *av) &av->ah_attr); av->timeout = path->packet_life_time + 1; - return 0; + spin_lock_irqsave(&cm.lock, flags); + if (&cm_id_priv->av == av) + list_add_tail(&cm_id_priv->prim_list, &port->cm_priv_prim_list); + else if (&cm_id_priv->alt_av == av) + list_add_tail(&cm_id_priv->altr_list, &port->cm_priv_altr_list); + else + ret = -EINVAL; + + spin_unlock_irqrestore(&cm.lock, flags); + + return ret; } static int cm_alloc_id(struct cm_id_private *cm_id_priv) @@ -677,6 +728,8 @@ struct ib_cm_id *ib_create_cm_id(struct ib_device *device, spin_lock_init(&cm_id_priv->lock); init_completion(&cm_id_priv->comp); INIT_LIST_HEAD(&cm_id_priv->work_list); + INIT_LIST_HEAD(&cm_id_priv->prim_list); + INIT_LIST_HEAD(&cm_id_priv->altr_list); atomic_set(&cm_id_priv->work_count, -1); atomic_set(&cm_id_priv->refcount, 1); return &cm_id_priv->id; @@ -892,6 +945,15 @@ retest: break; } + spin_lock_irq(&cm.lock); + if (!list_empty(&cm_id_priv->altr_list) && + (!cm_id_priv->altr_send_port_not_ready)) + list_del(&cm_id_priv->altr_list); + if (!list_empty(&cm_id_priv->prim_list) && + (!cm_id_priv->prim_send_port_not_ready)) + list_del(&cm_id_priv->prim_list); + spin_unlock_irq(&cm.lock); + cm_free_id(cm_id->local_id); cm_deref_id(cm_id_priv); wait_for_completion(&cm_id_priv->comp); @@ -1192,12 +1254,13 @@ int ib_send_cm_req(struct ib_cm_id *cm_id, goto out; } - ret = cm_init_av_by_path(param->primary_path, &cm_id_priv->av); + ret = cm_init_av_by_path(param->primary_path, &cm_id_priv->av, + cm_id_priv); if (ret) goto error1; if (param->alternate_path) { ret = cm_init_av_by_path(param->alternate_path, - &cm_id_priv->alt_av); + &cm_id_priv->alt_av, cm_id_priv); if (ret) goto error1; } @@ -1653,7 +1716,8 @@ static int cm_req_handler(struct cm_work *work) dev_put(gid_attr.ndev); } work->path[0].gid_type = gid_attr.gid_type; - ret = cm_init_av_by_path(&work->path[0], &cm_id_priv->av); + ret = cm_init_av_by_path(&work->path[0], &cm_id_priv->av, + cm_id_priv); } if (ret) { int err = ib_get_cached_gid(work->port->cm_dev->ib_device, @@ -1672,7 +1736,8 @@ static int cm_req_handler(struct cm_work *work) goto rejected; } if (req_msg->alt_local_lid) { - ret = cm_init_av_by_path(&work->path[1], &cm_id_priv->alt_av); + ret = cm_init_av_by_path(&work->path[1], &cm_id_priv->alt_av, + cm_id_priv); if (ret) { ib_send_cm_rej(cm_id, IB_CM_REJ_INVALID_ALT_GID, &work->path[0].sgid, @@ -2727,7 +2792,8 @@ int ib_send_cm_lap(struct ib_cm_id *cm_id, goto out; } - ret = cm_init_av_by_path(alternate_path, &cm_id_priv->alt_av); + ret = cm_init_av_by_path(alternate_path, &cm_id_priv->alt_av, + cm_id_priv); if (ret) goto out; cm_id_priv->alt_av.timeout = @@ -2839,7 +2905,8 @@ static int cm_lap_handler(struct cm_work *work) cm_init_av_for_response(work->port, work->mad_recv_wc->wc, work->mad_recv_wc->recv_buf.grh, &cm_id_priv->av); - cm_init_av_by_path(param->alternate_path, &cm_id_priv->alt_av); + cm_init_av_by_path(param->alternate_path, &cm_id_priv->alt_av, + cm_id_priv); ret = atomic_inc_and_test(&cm_id_priv->work_count); if (!ret) list_add_tail(&work->list, &cm_id_priv->work_list); @@ -3031,7 +3098,7 @@ int ib_send_cm_sidr_req(struct ib_cm_id *cm_id, return -EINVAL; cm_id_priv = container_of(cm_id, struct cm_id_private, id); - ret = cm_init_av_by_path(param->path, &cm_id_priv->av); + ret = cm_init_av_by_path(param->path, &cm_id_priv->av, cm_id_priv); if (ret) goto out; @@ -3468,7 +3535,9 @@ out: static int cm_migrate(struct ib_cm_id *cm_id) { struct cm_id_private *cm_id_priv; + struct cm_av tmp_av; unsigned long flags; + int tmp_send_port_not_ready; int ret = 0; cm_id_priv = container_of(cm_id, struct cm_id_private, id); @@ -3477,7 +3546,14 @@ static int cm_migrate(struct ib_cm_id *cm_id) (cm_id->lap_state == IB_CM_LAP_UNINIT || cm_id->lap_state == IB_CM_LAP_IDLE)) { cm_id->lap_state = IB_CM_LAP_IDLE; + /* Swap address vector */ + tmp_av = cm_id_priv->av; cm_id_priv->av = cm_id_priv->alt_av; + cm_id_priv->alt_av = tmp_av; + /* Swap port send ready state */ + tmp_send_port_not_ready = cm_id_priv->prim_send_port_not_ready; + cm_id_priv->prim_send_port_not_ready = cm_id_priv->altr_send_port_not_ready; + cm_id_priv->altr_send_port_not_ready = tmp_send_port_not_ready; } else ret = -EINVAL; spin_unlock_irqrestore(&cm_id_priv->lock, flags); @@ -3888,6 +3964,9 @@ static void cm_add_one(struct ib_device *ib_device) port->cm_dev = cm_dev; port->port_num = i; + INIT_LIST_HEAD(&port->cm_priv_prim_list); + INIT_LIST_HEAD(&port->cm_priv_altr_list); + ret = cm_create_port_fs(port); if (ret) goto error1; @@ -3945,6 +4024,8 @@ static void cm_remove_one(struct ib_device *ib_device, void *client_data) { struct cm_device *cm_dev = client_data; struct cm_port *port; + struct cm_id_private *cm_id_priv; + struct ib_mad_agent *cur_mad_agent; struct ib_port_modify port_modify = { .clr_port_cap_mask = IB_PORT_CM_SUP }; @@ -3968,15 +4049,27 @@ static void cm_remove_one(struct ib_device *ib_device, void *client_data) port = cm_dev->port[i-1]; ib_modify_port(ib_device, port->port_num, 0, &port_modify); + /* Mark all the cm_id's as not valid */ + spin_lock_irq(&cm.lock); + list_for_each_entry(cm_id_priv, &port->cm_priv_altr_list, altr_list) + cm_id_priv->altr_send_port_not_ready = 1; + list_for_each_entry(cm_id_priv, &port->cm_priv_prim_list, prim_list) + cm_id_priv->prim_send_port_not_ready = 1; + spin_unlock_irq(&cm.lock); /* * We flush the queue here after the going_down set, this * verify that no new works will be queued in the recv handler, * after that we can call the unregister_mad_agent */ flush_workqueue(cm.wq); - ib_unregister_mad_agent(port->mad_agent); + spin_lock_irq(&cm.state_lock); + cur_mad_agent = port->mad_agent; + port->mad_agent = NULL; + spin_unlock_irq(&cm.state_lock); + ib_unregister_mad_agent(cur_mad_agent); cm_remove_port_fs(port); } + device_unregister(cm_dev->device); kfree(cm_dev); } @@ -3989,6 +4082,7 @@ static int __init ib_cm_init(void) INIT_LIST_HEAD(&cm.device_list); rwlock_init(&cm.device_lock); spin_lock_init(&cm.lock); + spin_lock_init(&cm.state_lock); cm.listen_service_table = RB_ROOT; cm.listen_service_id = be64_to_cpu(IB_CM_ASSIGN_SERVICE_ID); cm.remote_id_table = RB_ROOT; From aeb76df46d1158d5f7f3d30f993a1bb6ee9c67a0 Mon Sep 17 00:00:00 2001 From: Leon Romanovsky Date: Mon, 31 Oct 2016 07:50:56 +0200 Subject: [PATCH 699/792] IB/core: Set routable RoCE gid type for ipv4/ipv6 networks On Thu, Oct 27, 2016 at 04:36:28PM +0300, Leon Romanovsky wrote: > From: Mark Bloch > > If the underlying netowrk type is ipv4 or ipv6 and the device supports > routable RoCE, prefer it so the traffic could cross subnets. > > Signed-off-by: Mark Bloch > Signed-off-by: Maor Gottlieb > Signed-off-by: Leon Romanovsky > --- Hi Doug, Please take the following v1 of this patch where I fixed spelling error from "netowrk" to be "network". Thanks. >From 09f96ba3e9b4442cfb44dca04c6726e55525c9c3 Mon Sep 17 00:00:00 2001 From: Mark Bloch Date: Sun, 11 Sep 2016 06:25:10 +0000 Subject: [PATCH rdma-rc v1 3/6] IB/core: Set routable RoCE gid type for ipv4/ipv6 networks If the underlying network type is ipv4 or ipv6 and the device supports routable RoCE, prefer it so the traffic could cross subnets. Signed-off-by: Mark Bloch Signed-off-by: Maor Gottlieb Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/core/cma.c | 21 ++++++++++++++++++++- 1 file changed, 20 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index 36bf50ebb187..9ca0da0a37c4 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -2436,6 +2436,18 @@ static int iboe_tos_to_sl(struct net_device *ndev, int tos) return 0; } +static enum ib_gid_type cma_route_gid_type(enum rdma_network_type network_type, + unsigned long supported_gids, + enum ib_gid_type default_gid) +{ + if ((network_type == RDMA_NETWORK_IPV4 || + network_type == RDMA_NETWORK_IPV6) && + test_bit(IB_GID_TYPE_ROCE_UDP_ENCAP, &supported_gids)) + return IB_GID_TYPE_ROCE_UDP_ENCAP; + + return default_gid; +} + static int cma_resolve_iboe_route(struct rdma_id_private *id_priv) { struct rdma_route *route = &id_priv->id.route; @@ -2461,6 +2473,8 @@ static int cma_resolve_iboe_route(struct rdma_id_private *id_priv) route->num_paths = 1; if (addr->dev_addr.bound_dev_if) { + unsigned long supported_gids; + ndev = dev_get_by_index(&init_net, addr->dev_addr.bound_dev_if); if (!ndev) { ret = -ENODEV; @@ -2484,7 +2498,12 @@ static int cma_resolve_iboe_route(struct rdma_id_private *id_priv) route->path_rec->net = &init_net; route->path_rec->ifindex = ndev->ifindex; - route->path_rec->gid_type = id_priv->gid_type; + supported_gids = roce_gid_type_mask_support(id_priv->id.device, + id_priv->id.port_num); + route->path_rec->gid_type = + cma_route_gid_type(addr->dev_addr.network, + supported_gids, + id_priv->gid_type); } if (!ndev) { ret = -ENODEV; From 61c3702863be9e9f1ef12ed5a5b17bae6cdfac0b Mon Sep 17 00:00:00 2001 From: Mark Bloch Date: Thu, 27 Oct 2016 16:36:29 +0300 Subject: [PATCH 700/792] IB/core: Add missing check for addr_resolve callback return value When calling rdma_resolve_ip inside rdma_addr_find_l2_eth_by_grh, the return status of the request was ignored in the callback function causing a successful return and an empty dmac. Signed-off-by: Mark Bloch Signed-off-by: Alex Vesker Reviewed-by: Or Gerlitz Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/core/addr.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/core/addr.c b/drivers/infiniband/core/addr.c index b136d3acc5bd..0f58f46dbad7 100644 --- a/drivers/infiniband/core/addr.c +++ b/drivers/infiniband/core/addr.c @@ -699,13 +699,16 @@ EXPORT_SYMBOL(rdma_addr_cancel); struct resolve_cb_context { struct rdma_dev_addr *addr; struct completion comp; + int status; }; static void resolve_cb(int status, struct sockaddr *src_addr, struct rdma_dev_addr *addr, void *context) { - memcpy(((struct resolve_cb_context *)context)->addr, addr, sizeof(struct - rdma_dev_addr)); + if (!status) + memcpy(((struct resolve_cb_context *)context)->addr, + addr, sizeof(struct rdma_dev_addr)); + ((struct resolve_cb_context *)context)->status = status; complete(&((struct resolve_cb_context *)context)->comp); } @@ -743,6 +746,10 @@ int rdma_addr_find_l2_eth_by_grh(const union ib_gid *sgid, wait_for_completion(&ctx.comp); + ret = ctx.status; + if (ret) + return ret; + memcpy(dmac, dev_addr.dst_dev_addr, ETH_ALEN); dev = dev_get_by_index(&init_net, dev_addr.bound_dev_if); if (!dev) From 3c7ba5760ab8eedec01159b267bb9bfcffe522ac Mon Sep 17 00:00:00 2001 From: Mark Bloch Date: Thu, 27 Oct 2016 16:36:31 +0300 Subject: [PATCH 701/792] IB/core: Avoid unsigned int overflow in sg_alloc_table sg_alloc_table gets unsigned int as parameter while the driver returns it as size_t. Check npages isn't greater than maximum unsigned int. Fixes: eeb8461e36c9 ("IB: Refactor umem to use linear SG table") Signed-off-by: Mark Bloch Signed-off-by: Maor Gottlieb Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/core/umem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/core/umem.c b/drivers/infiniband/core/umem.c index 224ad274ea0b..84b4eff90395 100644 --- a/drivers/infiniband/core/umem.c +++ b/drivers/infiniband/core/umem.c @@ -175,7 +175,7 @@ struct ib_umem *ib_umem_get(struct ib_ucontext *context, unsigned long addr, cur_base = addr & PAGE_MASK; - if (npages == 0) { + if (npages == 0 || npages > UINT_MAX) { ret = -EINVAL; goto out; } From 90be7c8ab72853ff9fc407f01518a898df1f3045 Mon Sep 17 00:00:00 2001 From: Majd Dibbiny Date: Thu, 27 Oct 2016 16:36:39 +0300 Subject: [PATCH 702/792] IB/mlx5: Fix memory leak in query device We need to free dev->port when we fail to enable RoCE or initialize node data. Fixes: 0837e86a7a34 ('IB/mlx5: Add per port counters') Signed-off-by: Majd Dibbiny Signed-off-by: Maor Gottlieb Reviewed-by: Mark Bloch Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx5/main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c index 22174774dbb8..bb61487861cc 100644 --- a/drivers/infiniband/hw/mlx5/main.c +++ b/drivers/infiniband/hw/mlx5/main.c @@ -3115,7 +3115,7 @@ static void *mlx5_ib_add(struct mlx5_core_dev *mdev) } err = init_node_data(dev); if (err) - goto err_dealloc; + goto err_free_port; mutex_init(&dev->flow_db.lock); mutex_init(&dev->cap_mask_mutex); @@ -3125,7 +3125,7 @@ static void *mlx5_ib_add(struct mlx5_core_dev *mdev) if (ll == IB_LINK_LAYER_ETHERNET) { err = mlx5_enable_roce(dev); if (err) - goto err_dealloc; + goto err_free_port; } err = create_dev_resources(&dev->devr); From efd7f40082a0dfd112eb87ff2124467a5739216f Mon Sep 17 00:00:00 2001 From: Maor Gottlieb Date: Thu, 27 Oct 2016 16:36:40 +0300 Subject: [PATCH 703/792] IB/mlx5: Validate requested RQT size Validate that the requested size of RQT is supported by firmware. Fixes: c5f9092936fe ('IB/mlx5: Add Receive Work Queue Indirection table operations') Signed-off-by: Maor Gottlieb Reviewed-by: Yishai Hadas Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx5/qp.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c index 41f4c2afbcdd..2be0d06b27dc 100644 --- a/drivers/infiniband/hw/mlx5/qp.c +++ b/drivers/infiniband/hw/mlx5/qp.c @@ -4815,6 +4815,14 @@ struct ib_rwq_ind_table *mlx5_ib_create_rwq_ind_table(struct ib_device *device, udata->inlen)) return ERR_PTR(-EOPNOTSUPP); + if (init_attr->log_ind_tbl_size > + MLX5_CAP_GEN(dev->mdev, log_max_rqt_size)) { + mlx5_ib_dbg(dev, "log_ind_tbl_size = %d is bigger than supported = %d\n", + init_attr->log_ind_tbl_size, + MLX5_CAP_GEN(dev->mdev, log_max_rqt_size)); + return ERR_PTR(-EINVAL); + } + min_resp_len = offsetof(typeof(resp), reserved) + sizeof(resp.reserved); if (udata->outlen && udata->outlen < min_resp_len) return ERR_PTR(-EINVAL); From 16b0e0695a73b68d8ca40288c8f9614ef208917b Mon Sep 17 00:00:00 2001 From: Daniel Jurgens Date: Thu, 27 Oct 2016 16:36:41 +0300 Subject: [PATCH 704/792] IB/mlx5: Use cache line size to select CQE stride When creating kernel CQs use 128B CQE stride if the cache line size is 128B, 64B otherwise. This prevents multiple CQEs from residing in a 128B cache line, which can cause retries when there are concurrent read and writes in one cache line. Tested with IPoIB on PPC64, saw ~5% throughput improvement. Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Daniel Jurgens Signed-off-by: Maor Gottlieb Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx5/cq.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/mlx5/cq.c b/drivers/infiniband/hw/mlx5/cq.c index 79d017baf6f4..fcd04b881ec1 100644 --- a/drivers/infiniband/hw/mlx5/cq.c +++ b/drivers/infiniband/hw/mlx5/cq.c @@ -932,8 +932,7 @@ struct ib_cq *mlx5_ib_create_cq(struct ib_device *ibdev, if (err) goto err_create; } else { - /* for now choose 64 bytes till we have a proper interface */ - cqe_size = 64; + cqe_size = cache_line_size() == 128 ? 128 : 64; err = create_cq_kernel(dev, cq, entries, cqe_size, &cqb, &index, &inlen); if (err) From 6bc1a656ab9f57f0112823b4a36930c9a29d1f89 Mon Sep 17 00:00:00 2001 From: Moshe Lazer Date: Thu, 27 Oct 2016 16:36:42 +0300 Subject: [PATCH 705/792] IB/mlx5: Resolve soft lock on massive reg MRs When calling reg_mr of large MRs (e.g. 4GB) from multiple processes and MR caches can't supply the required amount of MRs the slow-path of MR allocation may be used. In this case we need to serialize the slow-path between the processes to avoid soft lock. Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Moshe Lazer Signed-off-by: Maor Gottlieb Reviewed-by: Eli Cohen Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx5/mlx5_ib.h | 2 ++ drivers/infiniband/hw/mlx5/mr.c | 6 +++++- 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/mlx5/mlx5_ib.h b/drivers/infiniband/hw/mlx5/mlx5_ib.h index dcdcd195fe53..7d689903c87c 100644 --- a/drivers/infiniband/hw/mlx5/mlx5_ib.h +++ b/drivers/infiniband/hw/mlx5/mlx5_ib.h @@ -626,6 +626,8 @@ struct mlx5_ib_dev { struct mlx5_ib_resources devr; struct mlx5_mr_cache cache; struct timer_list delay_timer; + /* Prevents soft lock on massive reg MRs */ + struct mutex slow_path_mutex; int fill_delay; #ifdef CONFIG_INFINIBAND_ON_DEMAND_PAGING struct ib_odp_caps odp_caps; diff --git a/drivers/infiniband/hw/mlx5/mr.c b/drivers/infiniband/hw/mlx5/mr.c index d4ad672b905b..4e9012463c37 100644 --- a/drivers/infiniband/hw/mlx5/mr.c +++ b/drivers/infiniband/hw/mlx5/mr.c @@ -610,6 +610,7 @@ int mlx5_mr_cache_init(struct mlx5_ib_dev *dev) int err; int i; + mutex_init(&dev->slow_path_mutex); cache->wq = alloc_ordered_workqueue("mkey_cache", WQ_MEM_RECLAIM); if (!cache->wq) { mlx5_ib_warn(dev, "failed to create work queue\n"); @@ -1182,9 +1183,12 @@ struct ib_mr *mlx5_ib_reg_user_mr(struct ib_pd *pd, u64 start, u64 length, goto error; } - if (!mr) + if (!mr) { + mutex_lock(&dev->slow_path_mutex); mr = reg_create(NULL, pd, virt_addr, length, umem, ncont, page_shift, access_flags); + mutex_unlock(&dev->slow_path_mutex); + } if (IS_ERR(mr)) { err = PTR_ERR(mr); From dbaaff2a2caa03d472b5cc53a3fbfd415c97dc26 Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Thu, 27 Oct 2016 16:36:44 +0300 Subject: [PATCH 706/792] IB/mlx5: Fix fatal error dispatching When an internal error condition is detected, make sure to set the device inactive after dispatching the event so ULPs can get a notification of this event. Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Eli Cohen Signed-off-by: Maor Gottlieb Reviewed-by: Mohamad Haj Yahia Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx5/main.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c index bb61487861cc..a014ad38d889 100644 --- a/drivers/infiniband/hw/mlx5/main.c +++ b/drivers/infiniband/hw/mlx5/main.c @@ -2311,14 +2311,14 @@ static void mlx5_ib_event(struct mlx5_core_dev *dev, void *context, { struct mlx5_ib_dev *ibdev = (struct mlx5_ib_dev *)context; struct ib_event ibev; - + bool fatal = false; u8 port = 0; switch (event) { case MLX5_DEV_EVENT_SYS_ERROR: - ibdev->ib_active = false; ibev.event = IB_EVENT_DEVICE_FATAL; mlx5_ib_handle_internal_error(ibdev); + fatal = true; break; case MLX5_DEV_EVENT_PORT_UP: @@ -2370,6 +2370,9 @@ static void mlx5_ib_event(struct mlx5_core_dev *dev, void *context, if (ibdev->ib_active) ib_dispatch_event(&ibev); + + if (fatal) + ibdev->ib_active = false; } static void get_ext_port_caps(struct mlx5_ib_dev *dev) From a1ab8402d15d2305d2315d96ec3294bfdf16587e Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Thu, 27 Oct 2016 16:36:46 +0300 Subject: [PATCH 707/792] IB/mlx5: Fix NULL pointer dereference on debug print For XRC QP CQs may not exist. Check before attempting dereference. Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Eli Cohen Signed-off-by: Maor Gottlieb Reviewed-by: Yishai Hadas Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx5/qp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c index 2be0d06b27dc..59c4c89460d1 100644 --- a/drivers/infiniband/hw/mlx5/qp.c +++ b/drivers/infiniband/hw/mlx5/qp.c @@ -2052,8 +2052,8 @@ struct ib_qp *mlx5_ib_create_qp(struct ib_pd *pd, mlx5_ib_dbg(dev, "ib qpnum 0x%x, mlx qpn 0x%x, rcqn 0x%x, scqn 0x%x\n", qp->ibqp.qp_num, qp->trans_qp.base.mqp.qpn, - to_mcq(init_attr->recv_cq)->mcq.cqn, - to_mcq(init_attr->send_cq)->mcq.cqn); + init_attr->recv_cq ? to_mcq(init_attr->recv_cq)->mcq.cqn : -1, + init_attr->send_cq ? to_mcq(init_attr->send_cq)->mcq.cqn : -1); qp->trans_qp.xrcdn = xrcdn; From 37995116fecfce2b61ee3da6e73b3e394c6818f9 Mon Sep 17 00:00:00 2001 From: Daniel Jurgens Date: Thu, 10 Nov 2016 11:30:54 +0200 Subject: [PATCH 708/792] IB/mlx4: Check gid_index return value Check the returned GID index value and return an error if it is invalid. Fixes: 5070cd2239bd ('IB/mlx4: Replace mechanism for RoCE GID management') Signed-off-by: Daniel Jurgens Reviewed-by: Mark Bloch Reviewed-by: Yuval Shaia Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx4/ah.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/mlx4/ah.c b/drivers/infiniband/hw/mlx4/ah.c index 5fc623362731..b9bf0759f10a 100644 --- a/drivers/infiniband/hw/mlx4/ah.c +++ b/drivers/infiniband/hw/mlx4/ah.c @@ -102,7 +102,10 @@ static struct ib_ah *create_iboe_ah(struct ib_pd *pd, struct ib_ah_attr *ah_attr if (vlan_tag < 0x1000) vlan_tag |= (ah_attr->sl & 7) << 13; ah->av.eth.port_pd = cpu_to_be32(to_mpd(pd)->pdn | (ah_attr->port_num << 24)); - ah->av.eth.gid_index = mlx4_ib_gid_index_to_real_index(ibdev, ah_attr->port_num, ah_attr->grh.sgid_index); + ret = mlx4_ib_gid_index_to_real_index(ibdev, ah_attr->port_num, ah_attr->grh.sgid_index); + if (ret < 0) + return ERR_PTR(ret); + ah->av.eth.gid_index = ret; ah->av.eth.vlan = cpu_to_be16(vlan_tag); ah->av.eth.hop_limit = ah_attr->grh.hop_limit; if (ah_attr->static_rate) { From 593ff73bcfdc79f79a8a0df55504f75ad3e5d1a9 Mon Sep 17 00:00:00 2001 From: Matan Barak Date: Thu, 10 Nov 2016 11:30:55 +0200 Subject: [PATCH 709/792] IB/mlx4: Fix create CQ error flow Currently, if ib_copy_to_udata fails, the CQ won't be deleted from the radix tree and the HW (HW2SW). Fixes: 225c7b1feef1 ('IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters') Signed-off-by: Matan Barak Signed-off-by: Daniel Jurgens Reviewed-by: Mark Bloch Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/hw/mlx4/cq.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/mlx4/cq.c b/drivers/infiniband/hw/mlx4/cq.c index 1ea686b9e0f9..6a0fec357dae 100644 --- a/drivers/infiniband/hw/mlx4/cq.c +++ b/drivers/infiniband/hw/mlx4/cq.c @@ -253,11 +253,14 @@ struct ib_cq *mlx4_ib_create_cq(struct ib_device *ibdev, if (context) if (ib_copy_to_udata(udata, &cq->mcq.cqn, sizeof (__u32))) { err = -EFAULT; - goto err_dbmap; + goto err_cq_free; } return &cq->ibcq; +err_cq_free: + mlx4_cq_free(dev->dev, &cq->mcq); + err_dbmap: if (context) mlx4_ib_db_unmap_user(to_mucontext(context), &cq->db); From 1454ca3a97e147bb91e98b087446c39cf6692a48 Mon Sep 17 00:00:00 2001 From: Yonatan Cohen Date: Wed, 16 Nov 2016 10:39:14 +0200 Subject: [PATCH 710/792] IB/rxe: Fix kernel panic in UDP tunnel with GRO and RX checksum Missing initialization of udp_tunnel_sock_cfg causes to following kernel panic, while kernel tries to execute gro_receive(). While being there, we converted udp_port_cfg to use the same initialization scheme as udp_tunnel_sock_cfg. ------------[ cut here ]------------ kernel tried to execute NX-protected page - exploit attempt? (uid: 0) BUG: unable to handle kernel paging request at ffffffffa0588c50 IP: [] __this_module+0x50/0xffffffffffff8400 [ib_rxe] PGD 1c09067 PUD 1c0a063 PMD bb394067 PTE 80000000ad5e8163 Oops: 0011 [#1] SMP Modules linked in: ib_rxe ip6_udp_tunnel udp_tunnel CPU: 5 PID: 0 Comm: swapper/5 Not tainted 4.7.0-rc3+ #2 Hardware name: Red Hat KVM, BIOS Bochs 01/01/2011 task: ffff880235e4e680 ti: ffff880235e68000 task.ti: ffff880235e68000 RIP: 0010:[] [] __this_module+0x50/0xffffffffffff8400 [ib_rxe] RSP: 0018:ffff880237343c80 EFLAGS: 00010282 RAX: 00000000dffe482d RBX: ffff8800ae330900 RCX: 000000002001b712 RDX: ffff8800ae330900 RSI: ffff8800ae102578 RDI: ffff880235589c00 RBP: ffff880237343cb0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800ae33e262 R13: ffff880235589c00 R14: 0000000000000014 R15: ffff8800ae102578 FS: 0000000000000000(0000) GS:ffff880237340000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffa0588c50 CR3: 0000000001c06000 CR4: 00000000000006e0 Stack: ffffffff8160860e ffff8800ae330900 ffff8800ae102578 0000000000000014 000000000000004e ffff8800ae102578 ffff880237343ce0 ffffffff816088fb 0000000000000000 ffff8800ae330900 0000000000000000 00000000ffad0000 Call Trace: [] ? udp_gro_receive+0xde/0x130 [] udp4_gro_receive+0x10b/0x2d0 [] inet_gro_receive+0x1d3/0x270 [] dev_gro_receive+0x269/0x3b0 [] napi_gro_receive+0x38/0x120 [] mlx5e_handle_rx_cqe+0x27e/0x340 [mlx5_core] [] mlx5e_poll_rx_cq+0x66/0x6d0 [mlx5_core] [] mlx5e_napi_poll+0x8e/0x400 [mlx5_core] [] net_rx_action+0x160/0x380 [] __do_softirq+0xd7/0x2c5 [] irq_exit+0xf5/0x100 [] do_IRQ+0x56/0xd0 [] common_interrupt+0x8c/0x8c [] ? native_safe_halt+0x6/0x10 [] default_idle+0x1e/0xd0 [] arch_cpu_idle+0xf/0x20 [] default_idle_call+0x3c/0x50 [] cpu_startup_entry+0x323/0x3c0 [] start_secondary+0x15c/0x1a0 RIP [] __this_module+0x50/0xffffffffffff8400 [ib_rxe] RSP CR2: ffffffffa0588c50 ---[ end trace 489ee31fa7614ac5 ]--- Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: disabled ---[ end Kernel panic - not syncing: Fatal exception in interrupt ------------[ cut here ]------------ Fixes: 8700e3e7c485 ("Soft RoCE driver") Signed-off-by: Yonatan Cohen Reviewed-by: Moni Shoua Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/sw/rxe/rxe_net.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/infiniband/sw/rxe/rxe_net.c b/drivers/infiniband/sw/rxe/rxe_net.c index b8258e4f0aea..ffff5a54cb34 100644 --- a/drivers/infiniband/sw/rxe/rxe_net.c +++ b/drivers/infiniband/sw/rxe/rxe_net.c @@ -243,10 +243,8 @@ static struct socket *rxe_setup_udp_tunnel(struct net *net, __be16 port, { int err; struct socket *sock; - struct udp_port_cfg udp_cfg; - struct udp_tunnel_sock_cfg tnl_cfg; - - memset(&udp_cfg, 0, sizeof(udp_cfg)); + struct udp_port_cfg udp_cfg = {0}; + struct udp_tunnel_sock_cfg tnl_cfg = {0}; if (ipv6) { udp_cfg.family = AF_INET6; @@ -264,10 +262,8 @@ static struct socket *rxe_setup_udp_tunnel(struct net *net, __be16 port, return ERR_PTR(err); } - tnl_cfg.sk_user_data = NULL; tnl_cfg.encap_type = 1; tnl_cfg.encap_rcv = rxe_udp_encap_recv; - tnl_cfg.encap_destroy = NULL; /* Setup UDP tunnel */ setup_udp_tunnel_sock(net, sock, &tnl_cfg); From 002e062e13db10973adb8302f231e48b477c7ccf Mon Sep 17 00:00:00 2001 From: Yonatan Cohen Date: Wed, 16 Nov 2016 10:39:15 +0200 Subject: [PATCH 711/792] IB/rxe: Fix handling of erroneous WR To correctly handle a erroneous WR this fix does the following 1. Make sure the bad WQE causes a user completion event. 2. Call rxe_completer to handle the erred WQE. Before the fix, when rxe_requester found a bad WQE, it changed its status to IB_WC_LOC_PROT_ERR and exit with 0 for non RC QPs. If this was the 1st WQE then there would be no ACK to invoke the completer and this bad WQE would be stuck in the QP's send-q. On top of that the requester exiting with 0 caused rxe_do_task to endlessly invoke rxe_requester, resulting in a soft-lockup attached below. In case the WQE was not the 1st and rxe_completer did get a chance to handle the bad WQE, it did not cause a complete event since the WQE's IB_SEND_SIGNALED flag was not set. Setting WQE status to IB_SEND_SIGNALED is subject to IBA spec version 1.2.1, section 10.7.3.1 Signaled Completions. NMI watchdog: BUG: soft lockup - CPU#7 stuck for 22s! [] ? rxe_pool_get_index+0x35/0xb0 [rdma_rxe] [] lookup_mem+0x3c/0xc0 [rdma_rxe] [] copy_data+0x1c4/0x230 [rdma_rxe] [] rxe_requester+0x9d0/0x1100 [rdma_rxe] [] ? kfree_skbmem+0x5a/0x60 [] rxe_do_task+0x89/0xf0 [rdma_rxe] [] rxe_run_task+0x12/0x30 [rdma_rxe] [] rxe_post_send+0x41a/0x550 [rdma_rxe] [] ? __kmalloc+0x182/0x200 [] ? down_read+0x12/0x40 [] ib_uverbs_post_send+0x532/0x540 [ib_uverbs] [] ? tcp_sendmsg+0x402/0xb80 [] ib_uverbs_write+0x18c/0x3f0 [ib_uverbs] [] ? inet_recvmsg+0x7e/0xb0 [] ? sock_recvmsg+0x3d/0x50 [] __vfs_write+0x37/0x140 [] vfs_write+0xb2/0x1b0 [] SyS_write+0x55/0xc0 [] entry_SYSCALL_64_fastpath+0x1a/0xa Fixes: 8700e3e7c485 ("Soft RoCE driver") Signed-off-by: Yonatan Cohen Reviewed-by: Moni Shoua Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/sw/rxe/rxe_req.c | 21 +++++++++++++-------- 1 file changed, 13 insertions(+), 8 deletions(-) diff --git a/drivers/infiniband/sw/rxe/rxe_req.c b/drivers/infiniband/sw/rxe/rxe_req.c index 832846b73ea0..22bd9630dcd9 100644 --- a/drivers/infiniband/sw/rxe/rxe_req.c +++ b/drivers/infiniband/sw/rxe/rxe_req.c @@ -696,7 +696,8 @@ next_wqe: qp->req.wqe_index); wqe->state = wqe_state_done; wqe->status = IB_WC_SUCCESS; - goto complete; + __rxe_do_task(&qp->comp.task); + return 0; } payload = mtu; } @@ -745,13 +746,17 @@ err: wqe->status = IB_WC_LOC_PROT_ERR; wqe->state = wqe_state_error; -complete: - if (qp_type(qp) != IB_QPT_RC) { - while (rxe_completer(qp) == 0) - ; - } - - return 0; + /* + * IBA Spec. Section 10.7.3.1 SIGNALED COMPLETIONS + * ---------8<---------8<------------- + * ...Note that if a completion error occurs, a Work Completion + * will always be generated, even if the signaling + * indicator requests an Unsignaled Completion. + * ---------8<---------8<------------- + */ + wqe->wr.send_flags |= IB_SEND_SIGNALED; + __rxe_do_task(&qp->comp.task); + return -EAGAIN; exit: return -EAGAIN; From aa75b07b478a774b1432e2df1be5cd8ae834de0f Mon Sep 17 00:00:00 2001 From: Yonatan Cohen Date: Wed, 16 Nov 2016 10:39:17 +0200 Subject: [PATCH 712/792] IB/rxe: Clear queue buffer when modifying QP to reset RXE resets the send-q only once in rxe_qp_init_req() when QP is created, but when the QP is reused after QP reset, the send-q holds previous garbage data. This garbage data wrongly fails CQEs that otherwise should have completed successfully. Fixes: 8700e3e7c485 ("Soft RoCE driver") Signed-off-by: Yonatan Cohen Reviewed-by: Moni Shoua Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/sw/rxe/rxe_qp.c | 1 + drivers/infiniband/sw/rxe/rxe_queue.c | 9 +++++++++ drivers/infiniband/sw/rxe/rxe_queue.h | 2 ++ 3 files changed, 12 insertions(+) diff --git a/drivers/infiniband/sw/rxe/rxe_qp.c b/drivers/infiniband/sw/rxe/rxe_qp.c index b8036cfbce04..95aaaa282a04 100644 --- a/drivers/infiniband/sw/rxe/rxe_qp.c +++ b/drivers/infiniband/sw/rxe/rxe_qp.c @@ -522,6 +522,7 @@ static void rxe_qp_reset(struct rxe_qp *qp) if (qp->sq.queue) { __rxe_do_task(&qp->comp.task); __rxe_do_task(&qp->req.task); + rxe_queue_reset(qp->sq.queue); } /* cleanup attributes */ diff --git a/drivers/infiniband/sw/rxe/rxe_queue.c b/drivers/infiniband/sw/rxe/rxe_queue.c index 08274254eb88..d14bf496d62d 100644 --- a/drivers/infiniband/sw/rxe/rxe_queue.c +++ b/drivers/infiniband/sw/rxe/rxe_queue.c @@ -84,6 +84,15 @@ err1: return -EINVAL; } +inline void rxe_queue_reset(struct rxe_queue *q) +{ + /* queue is comprised from header and the memory + * of the actual queue. See "struct rxe_queue_buf" in rxe_queue.h + * reset only the queue itself and not the management header + */ + memset(q->buf->data, 0, q->buf_size - sizeof(struct rxe_queue_buf)); +} + struct rxe_queue *rxe_queue_init(struct rxe_dev *rxe, int *num_elem, unsigned int elem_size) diff --git a/drivers/infiniband/sw/rxe/rxe_queue.h b/drivers/infiniband/sw/rxe/rxe_queue.h index 239fd609c31e..8c8641c87817 100644 --- a/drivers/infiniband/sw/rxe/rxe_queue.h +++ b/drivers/infiniband/sw/rxe/rxe_queue.h @@ -84,6 +84,8 @@ int do_mmap_info(struct rxe_dev *rxe, size_t buf_size, struct rxe_mmap_info **ip_p); +void rxe_queue_reset(struct rxe_queue *q); + struct rxe_queue *rxe_queue_init(struct rxe_dev *rxe, int *num_elem, unsigned int elem_size); From 6d931308f55faaef3f30bd0346c47f99528b229d Mon Sep 17 00:00:00 2001 From: Yonatan Cohen Date: Wed, 16 Nov 2016 10:39:18 +0200 Subject: [PATCH 713/792] IB/rxe: Update qp state for user query The method rxe_qp_error() transitions QP to error state and make sure the QP is drained. It did not though update the QP state for user's query. This patch fixes this. Fixes: 8700e3e7c485 ("Soft RoCE driver") Signed-off-by: Yonatan Cohen Reviewed-by: Moni Shoua Signed-off-by: Leon Romanovsky Signed-off-by: Doug Ledford --- drivers/infiniband/sw/rxe/rxe_qp.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/infiniband/sw/rxe/rxe_qp.c b/drivers/infiniband/sw/rxe/rxe_qp.c index 95aaaa282a04..c3e60e4bde6e 100644 --- a/drivers/infiniband/sw/rxe/rxe_qp.c +++ b/drivers/infiniband/sw/rxe/rxe_qp.c @@ -574,6 +574,7 @@ void rxe_qp_error(struct rxe_qp *qp) { qp->req.state = QP_STATE_ERROR; qp->resp.state = QP_STATE_ERROR; + qp->attr.qp_state = IB_QPS_ERR; /* drain work and packet queues */ rxe_run_task(&qp->resp.task, 1); From 4ff522ea47944ffd3d4d27023ace8bc6a722c834 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Tue, 18 Oct 2016 14:04:39 -0700 Subject: [PATCH 714/792] iw_cxgb4: set *bad_wr for post_send/post_recv errors There are a few cases in c4iw_post_send() and c4iw_post_receive() where *bad_wr is not set when an error is returned. This can cause a crash if the application tries to use bad_wr. Signed-off-by: Steve Wise Signed-off-by: Doug Ledford --- drivers/infiniband/hw/cxgb4/qp.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/infiniband/hw/cxgb4/qp.c b/drivers/infiniband/hw/cxgb4/qp.c index f57deba6717c..5790e1dbd618 100644 --- a/drivers/infiniband/hw/cxgb4/qp.c +++ b/drivers/infiniband/hw/cxgb4/qp.c @@ -797,11 +797,13 @@ int c4iw_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, spin_lock_irqsave(&qhp->lock, flag); if (t4_wq_in_error(&qhp->wq)) { spin_unlock_irqrestore(&qhp->lock, flag); + *bad_wr = wr; return -EINVAL; } num_wrs = t4_sq_avail(&qhp->wq); if (num_wrs == 0) { spin_unlock_irqrestore(&qhp->lock, flag); + *bad_wr = wr; return -ENOMEM; } while (wr) { @@ -934,11 +936,13 @@ int c4iw_post_receive(struct ib_qp *ibqp, struct ib_recv_wr *wr, spin_lock_irqsave(&qhp->lock, flag); if (t4_wq_in_error(&qhp->wq)) { spin_unlock_irqrestore(&qhp->lock, flag); + *bad_wr = wr; return -EINVAL; } num_wrs = t4_rq_avail(&qhp->wq); if (num_wrs == 0) { spin_unlock_irqrestore(&qhp->lock, flag); + *bad_wr = wr; return -ENOMEM; } while (wr) { From 5c6b2aaf9316fd0983c0c999d920306ddc65bd2d Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Thu, 3 Nov 2016 12:09:38 -0700 Subject: [PATCH 715/792] iw_cxgb4: invalidate the mr when posting a read_w_inv wr Also, rearrange things a bit to have a common c4iw_invalidate_mr() function used everywhere that we need to invalidate. Fixes: 49b53a93a64a ("iw_cxgb4: add fast-path for small REG_MR operations") Signed-off-by: Steve Wise Signed-off-by: Doug Ledford --- drivers/infiniband/hw/cxgb4/cq.c | 17 +++-------------- drivers/infiniband/hw/cxgb4/iw_cxgb4.h | 2 +- drivers/infiniband/hw/cxgb4/mem.c | 12 ++++++++++++ drivers/infiniband/hw/cxgb4/qp.c | 16 ++++++++-------- 4 files changed, 24 insertions(+), 23 deletions(-) diff --git a/drivers/infiniband/hw/cxgb4/cq.c b/drivers/infiniband/hw/cxgb4/cq.c index 867b8cf82be8..19c6477af19f 100644 --- a/drivers/infiniband/hw/cxgb4/cq.c +++ b/drivers/infiniband/hw/cxgb4/cq.c @@ -666,18 +666,6 @@ skip_cqe: return ret; } -static void invalidate_mr(struct c4iw_dev *rhp, u32 rkey) -{ - struct c4iw_mr *mhp; - unsigned long flags; - - spin_lock_irqsave(&rhp->lock, flags); - mhp = get_mhp(rhp, rkey >> 8); - if (mhp) - mhp->attr.state = 0; - spin_unlock_irqrestore(&rhp->lock, flags); -} - /* * Get one cq entry from c4iw and map it to openib. * @@ -733,7 +721,7 @@ static int c4iw_poll_cq_one(struct c4iw_cq *chp, struct ib_wc *wc) CQE_OPCODE(&cqe) == FW_RI_SEND_WITH_SE_INV) { wc->ex.invalidate_rkey = CQE_WRID_STAG(&cqe); wc->wc_flags |= IB_WC_WITH_INVALIDATE; - invalidate_mr(qhp->rhp, wc->ex.invalidate_rkey); + c4iw_invalidate_mr(qhp->rhp, wc->ex.invalidate_rkey); } } else { switch (CQE_OPCODE(&cqe)) { @@ -762,7 +750,8 @@ static int c4iw_poll_cq_one(struct c4iw_cq *chp, struct ib_wc *wc) /* Invalidate the MR if the fastreg failed */ if (CQE_STATUS(&cqe) != T4_ERR_SUCCESS) - invalidate_mr(qhp->rhp, CQE_WRID_FR_STAG(&cqe)); + c4iw_invalidate_mr(qhp->rhp, + CQE_WRID_FR_STAG(&cqe)); break; default: printk(KERN_ERR MOD "Unexpected opcode %d " diff --git a/drivers/infiniband/hw/cxgb4/iw_cxgb4.h b/drivers/infiniband/hw/cxgb4/iw_cxgb4.h index 7e7f79e55006..4788e1a46fde 100644 --- a/drivers/infiniband/hw/cxgb4/iw_cxgb4.h +++ b/drivers/infiniband/hw/cxgb4/iw_cxgb4.h @@ -999,6 +999,6 @@ extern int db_coalescing_threshold; extern int use_dsgl; void c4iw_drain_rq(struct ib_qp *qp); void c4iw_drain_sq(struct ib_qp *qp); - +void c4iw_invalidate_mr(struct c4iw_dev *rhp, u32 rkey); #endif diff --git a/drivers/infiniband/hw/cxgb4/mem.c b/drivers/infiniband/hw/cxgb4/mem.c index 80e27749420a..410408f886c1 100644 --- a/drivers/infiniband/hw/cxgb4/mem.c +++ b/drivers/infiniband/hw/cxgb4/mem.c @@ -770,3 +770,15 @@ int c4iw_dereg_mr(struct ib_mr *ib_mr) kfree(mhp); return 0; } + +void c4iw_invalidate_mr(struct c4iw_dev *rhp, u32 rkey) +{ + struct c4iw_mr *mhp; + unsigned long flags; + + spin_lock_irqsave(&rhp->lock, flags); + mhp = get_mhp(rhp, rkey >> 8); + if (mhp) + mhp->attr.state = 0; + spin_unlock_irqrestore(&rhp->lock, flags); +} diff --git a/drivers/infiniband/hw/cxgb4/qp.c b/drivers/infiniband/hw/cxgb4/qp.c index 5790e1dbd618..b7ac97b27c88 100644 --- a/drivers/infiniband/hw/cxgb4/qp.c +++ b/drivers/infiniband/hw/cxgb4/qp.c @@ -706,12 +706,8 @@ static int build_memreg(struct t4_sq *sq, union t4_wr *wqe, return 0; } -static int build_inv_stag(struct c4iw_dev *dev, union t4_wr *wqe, - struct ib_send_wr *wr, u8 *len16) +static int build_inv_stag(union t4_wr *wqe, struct ib_send_wr *wr, u8 *len16) { - struct c4iw_mr *mhp = get_mhp(dev, wr->ex.invalidate_rkey >> 8); - - mhp->attr.state = 0; wqe->inv.stag_inv = cpu_to_be32(wr->ex.invalidate_rkey); wqe->inv.r2 = 0; *len16 = DIV_ROUND_UP(sizeof wqe->inv, 16); @@ -842,10 +838,13 @@ int c4iw_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, case IB_WR_RDMA_READ_WITH_INV: fw_opcode = FW_RI_RDMA_READ_WR; swsqe->opcode = FW_RI_READ_REQ; - if (wr->opcode == IB_WR_RDMA_READ_WITH_INV) + if (wr->opcode == IB_WR_RDMA_READ_WITH_INV) { + c4iw_invalidate_mr(qhp->rhp, + wr->sg_list[0].lkey); fw_flags = FW_RI_RDMA_READ_INVALIDATE; - else + } else { fw_flags = 0; + } err = build_rdma_read(wqe, wr, &len16); if (err) break; @@ -878,7 +877,8 @@ int c4iw_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, fw_flags |= FW_RI_LOCAL_FENCE_FLAG; fw_opcode = FW_RI_INV_LSTAG_WR; swsqe->opcode = FW_RI_LOCAL_INV; - err = build_inv_stag(qhp->rhp, wqe, wr, &len16); + err = build_inv_stag(wqe, wr, &len16); + c4iw_invalidate_mr(qhp->rhp, wr->ex.invalidate_rkey); break; default: PDBG("%s post of type=%d TBD!\n", __func__, From e47112d9d6009bf6b7438cedc0270316d6b0370d Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Tue, 15 Nov 2016 15:58:15 -0800 Subject: [PATCH 716/792] net: dsa: b53: Fix VLAN usage and how we treat CPU port We currently have a fundamental problem in how we treat the CPU port and its VLAN membership. As soon as a second VLAN is configured to be untagged, the CPU automatically becomes untagged for that VLAN as well, and yet, we don't gracefully make sure that the CPU becomes tagged in the other VLANs it could be a member of. This results in only one VLAN being effectively usable from the CPU's perspective. Instead of having some pretty complex logic which tries to maintain the CPU port's default VLAN and its untagged properties, just do something very simple which consists in neither altering the CPU port's PVID settings, nor its untagged settings: - whenever a VLAN is added, the CPU is automatically a member of this VLAN group, as a tagged member - PVID settings for downstream ports do not alter the CPU port's PVID since it now is part of all VLANs in the system This means that a typical example where e.g: LAN ports are in VLAN1, and WAN port is in VLAN2, now require having two VLAN interfaces for the host to properly terminate and send traffic from/to. Fixes: Fixes: a2482d2ce349 ("net: dsa: b53: Plug in VLAN support") Reported-by: Hartmut Knaack Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/dsa/b53/b53_common.c | 16 ++++------------ 1 file changed, 4 insertions(+), 12 deletions(-) diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c index 7717b19dc806..947adda3397d 100644 --- a/drivers/net/dsa/b53/b53_common.c +++ b/drivers/net/dsa/b53/b53_common.c @@ -962,9 +962,10 @@ static void b53_vlan_add(struct dsa_switch *ds, int port, vl->members |= BIT(port) | BIT(cpu_port); if (untagged) - vl->untag |= BIT(port) | BIT(cpu_port); + vl->untag |= BIT(port); else - vl->untag &= ~(BIT(port) | BIT(cpu_port)); + vl->untag &= ~BIT(port); + vl->untag &= ~BIT(cpu_port); b53_set_vlan_entry(dev, vid, vl); b53_fast_age_vlan(dev, vid); @@ -973,8 +974,6 @@ static void b53_vlan_add(struct dsa_switch *ds, int port, if (pvid) { b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), vlan->vid_end); - b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(cpu_port), - vlan->vid_end); b53_fast_age_vlan(dev, vid); } } @@ -984,7 +983,6 @@ static int b53_vlan_del(struct dsa_switch *ds, int port, { struct b53_device *dev = ds->priv; bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; - unsigned int cpu_port = dev->cpu_port; struct b53_vlan *vl; u16 vid; u16 pvid; @@ -997,8 +995,6 @@ static int b53_vlan_del(struct dsa_switch *ds, int port, b53_get_vlan_entry(dev, vid, vl); vl->members &= ~BIT(port); - if ((vl->members & BIT(cpu_port)) == BIT(cpu_port)) - vl->members = 0; if (pvid == vid) { if (is5325(dev) || is5365(dev)) @@ -1007,18 +1003,14 @@ static int b53_vlan_del(struct dsa_switch *ds, int port, pvid = 0; } - if (untagged) { + if (untagged) vl->untag &= ~(BIT(port)); - if ((vl->untag & BIT(cpu_port)) == BIT(cpu_port)) - vl->untag = 0; - } b53_set_vlan_entry(dev, vid, vl); b53_fast_age_vlan(dev, vid); } b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), pvid); - b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(cpu_port), pvid); b53_fast_age_vlan(dev, pvid); return 0; From e5f6f564fd191d365fcd775c06a732a488205588 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 16 Nov 2016 06:31:52 -0800 Subject: [PATCH 717/792] bnxt: add a missing rcu synchronization Add a missing synchronize_net() call to avoid potential use after free, since we explicitly call napi_hash_del() to factorize the RCU grace period. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Eric Dumazet Cc: Michael Chan Acked-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index c6909660e097..e18635b2a002 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -4934,6 +4934,10 @@ static void bnxt_del_napi(struct bnxt *bp) napi_hash_del(&bnapi->napi); netif_napi_del(&bnapi->napi); } + /* We called napi_hash_del() before netif_napi_del(), we need + * to respect an RCU grace period before freeing napi structures. + */ + synchronize_net(); } static void bnxt_init_napi(struct bnxt *bp) From 4a59015372840a6fc35d7fd40638a9d5dc3ec958 Mon Sep 17 00:00:00 2001 From: Andreas Gruenbacher Date: Sun, 13 Nov 2016 21:23:34 +0100 Subject: [PATCH 718/792] xattr: Fix setting security xattrs on sockfs The IOP_XATTR flag is set on sockfs because sockfs supports getting the "system.sockprotoname" xattr. Since commit 6c6ef9f2, this flag is checked for setxattr support as well. This is wrong on sockfs because security xattr support there is supposed to be provided by security_inode_setsecurity. The smack security module relies on socket labels (xattrs). Fix this by adding a security xattr handler on sockfs that returns -EAGAIN, and by checking for -EAGAIN in setxattr. We cannot simply check for -EOPNOTSUPP in setxattr because there are filesystems that neither have direct security xattr support nor support via security_inode_setsecurity. A more proper fix might be to move the call to security_inode_setsecurity into sockfs, but it's not clear to me if that is safe: we would end up calling security_inode_post_setxattr after that as well. Signed-off-by: Andreas Gruenbacher Signed-off-by: Al Viro --- fs/xattr.c | 22 ++++++++++++++-------- net/socket.c | 15 +++++++++++++++ 2 files changed, 29 insertions(+), 8 deletions(-) diff --git a/fs/xattr.c b/fs/xattr.c index 3368659c471e..2d13b4e62fae 100644 --- a/fs/xattr.c +++ b/fs/xattr.c @@ -170,7 +170,7 @@ int __vfs_setxattr_noperm(struct dentry *dentry, const char *name, const void *value, size_t size, int flags) { struct inode *inode = dentry->d_inode; - int error = -EOPNOTSUPP; + int error = -EAGAIN; int issec = !strncmp(name, XATTR_SECURITY_PREFIX, XATTR_SECURITY_PREFIX_LEN); @@ -183,15 +183,21 @@ int __vfs_setxattr_noperm(struct dentry *dentry, const char *name, security_inode_post_setxattr(dentry, name, value, size, flags); } - } else if (issec) { - const char *suffix = name + XATTR_SECURITY_PREFIX_LEN; - + } else { if (unlikely(is_bad_inode(inode))) return -EIO; - error = security_inode_setsecurity(inode, suffix, value, - size, flags); - if (!error) - fsnotify_xattr(dentry); + } + if (error == -EAGAIN) { + error = -EOPNOTSUPP; + + if (issec) { + const char *suffix = name + XATTR_SECURITY_PREFIX_LEN; + + error = security_inode_setsecurity(inode, suffix, value, + size, flags); + if (!error) + fsnotify_xattr(dentry); + } } return error; diff --git a/net/socket.c b/net/socket.c index 272518b087c8..73dc69f9681e 100644 --- a/net/socket.c +++ b/net/socket.c @@ -341,8 +341,23 @@ static const struct xattr_handler sockfs_xattr_handler = { .get = sockfs_xattr_get, }; +static int sockfs_security_xattr_set(const struct xattr_handler *handler, + struct dentry *dentry, struct inode *inode, + const char *suffix, const void *value, + size_t size, int flags) +{ + /* Handled by LSM. */ + return -EAGAIN; +} + +static const struct xattr_handler sockfs_security_xattr_handler = { + .prefix = XATTR_SECURITY_PREFIX, + .set = sockfs_security_xattr_set, +}; + static const struct xattr_handler *sockfs_xattr_handlers[] = { &sockfs_xattr_handler, + &sockfs_security_xattr_handler, NULL }; From 680bb946a1ae04fe0ff369a4965f76b48c07dc54 Mon Sep 17 00:00:00 2001 From: Abhi Das Date: Wed, 16 Nov 2016 21:44:23 -0600 Subject: [PATCH 719/792] fix iov_iter_advance() for ITER_PIPE iov_iter_advance() needs to decrement iter->count by the number of bytes we'd moved beyond. Normal flavours do that, but ITER_PIPE doesn't and ITER_PIPE generic_file_read_iter() for O_DIRECT files ends up with a bogus fallback to page cache read, resulting in incorrect values for file offset and bytes read. Signed-off-by: Abhi Das Signed-off-by: Al Viro --- lib/iov_iter.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/lib/iov_iter.c b/lib/iov_iter.c index f0c7f1481bae..f2bd21b93dfc 100644 --- a/lib/iov_iter.c +++ b/lib/iov_iter.c @@ -683,10 +683,11 @@ static void pipe_advance(struct iov_iter *i, size_t size) struct pipe_inode_info *pipe = i->pipe; struct pipe_buffer *buf; int idx = i->idx; - size_t off = i->iov_offset; + size_t off = i->iov_offset, orig_sz; if (unlikely(i->count < size)) size = i->count; + orig_sz = size; if (size) { if (off) /* make it relative to the beginning of buffer */ @@ -713,6 +714,7 @@ static void pipe_advance(struct iov_iter *i, size_t size) pipe->nrbufs--; } } + i->count -= orig_sz; } void iov_iter_advance(struct iov_iter *i, size_t size) From 553bbc11aa6c1f9e0f529a06aeeca15fbe4a3985 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 16 Nov 2016 15:17:09 +0100 Subject: [PATCH 720/792] x86/boot: Avoid warning for zero-filling .bss The latest binutils are warning about a .fill directive with an explicit value in a .bss section: arch/x86/kernel/head_32.S: Assembler messages: arch/x86/kernel/head_32.S:677: Warning: ignoring fill value in section `.bss..page_aligned' arch/x86/kernel/head_32.S:679: Warning: ignoring fill value in section `.bss..page_aligned' This comes from the 'ENTRY()' macro padding the space between the symbols with 'nop' via: .align 4,0x90 Open-coding the .globl directive without the padding avoids that warning, as all the symbols are already page aligned. Signed-off-by: Arnd Bergmann Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Josh Poimboeuf Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/20161116141726.2013389-1-arnd@arndb.de Signed-off-by: Ingo Molnar --- arch/x86/kernel/head_32.S | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S index b6b2f0264af3..2dabea46f039 100644 --- a/arch/x86/kernel/head_32.S +++ b/arch/x86/kernel/head_32.S @@ -665,14 +665,17 @@ __PAGE_ALIGNED_BSS initial_pg_pmd: .fill 1024*KPMDS,4,0 #else -ENTRY(initial_page_table) +.globl initial_page_table +initial_page_table: .fill 1024,4,0 #endif initial_pg_fixmap: .fill 1024,4,0 -ENTRY(empty_zero_page) +.globl empty_zero_page +empty_zero_page: .fill 4096,1,0 -ENTRY(swapper_pg_dir) +.globl swapper_pg_dir +swapper_pg_dir: .fill 1024,4,0 EXPORT_SYMBOL(empty_zero_page) From d5afc1b68a6ddc27746d31f775025afe75ec8122 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 16 Nov 2016 10:24:15 -0800 Subject: [PATCH 721/792] dmaengine: cppi41: More PM runtime fixes Fix use of u32 instead of int for checking for negative errors values as pointed out by Dan Carpenter . And while testing the PM runtime error path by randomly returning failed values in runtime resume, I noticed two more places that need fixing: - If pm_runtime_get_sync() fails in probe, we still need to do pm_runtime_put_sync() to keep the use count happy. We could call pm_runtime_put_noidle() on the error path, but we're just going to call pm_runtime_disable() after that so pm_runtime_put_sync() will do what we want - We should print an error if pm_runtime_get_sync() fails in cppi41_dma_alloc_chan_resources() so we know where it happens Reported-by: Dan Carpenter Fixes: 740b4be3f742 ("dmaengine: cpp41: Fix handling of error path") Signed-off-by: Tony Lindgren Signed-off-by: Vinod Koul --- drivers/dma/cppi41.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/dma/cppi41.c b/drivers/dma/cppi41.c index 4b52126c13cf..d5ba43a87a68 100644 --- a/drivers/dma/cppi41.c +++ b/drivers/dma/cppi41.c @@ -317,11 +317,12 @@ static irqreturn_t cppi41_irq(int irq, void *data) while (val) { u32 desc, len; + int error; - status = pm_runtime_get(cdd->ddev.dev); - if (status < 0) + error = pm_runtime_get(cdd->ddev.dev); + if (error < 0) dev_err(cdd->ddev.dev, "%s pm runtime get: %i\n", - __func__, status); + __func__, error); q_num = __fls(val); val &= ~(1 << q_num); @@ -367,6 +368,8 @@ static int cppi41_dma_alloc_chan_resources(struct dma_chan *chan) error = pm_runtime_get_sync(cdd->ddev.dev); if (error < 0) { + dev_err(cdd->ddev.dev, "%s pm runtime get: %i\n", + __func__, error); pm_runtime_put_noidle(cdd->ddev.dev); return error; @@ -1072,8 +1075,8 @@ err_chans: deinit_cppi41(dev, cdd); err_init_cppi: pm_runtime_dont_use_autosuspend(dev); - pm_runtime_put_sync(dev); err_get_sync: + pm_runtime_put_sync(dev); pm_runtime_disable(dev); iounmap(cdd->usbss_mem); iounmap(cdd->ctrl_mem); From a5a40d4624cd2328c69768f6eb41716fc249d7be Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 25 Oct 2016 23:29:10 +0200 Subject: [PATCH 722/792] crypto: caam - fix type mismatch warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Building the caam driver on arm64 produces a harmless warning: drivers/crypto/caam/caamalg.c:140:139: warning: comparison of distinct pointer types lacks a cast We can use min_t to tell the compiler which type we want it to use here. Fixes: 5ecf8ef9103c ("crypto: caam - fix sg dump") Signed-off-by: Arnd Bergmann Reviewed-by: Horia Geantă Signed-off-by: Herbert Xu --- drivers/crypto/caam/caamalg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/crypto/caam/caamalg.c b/drivers/crypto/caam/caamalg.c index f5a63ba97023..954a64c7757b 100644 --- a/drivers/crypto/caam/caamalg.c +++ b/drivers/crypto/caam/caamalg.c @@ -137,7 +137,7 @@ static void dbg_dump_sg(const char *level, const char *prefix_str, } buf = it_page + it->offset; - len = min(tlen, it->length); + len = min_t(size_t, tlen, it->length); print_hex_dump(level, prefix_str, prefix_type, rowsize, groupsize, buf, len, ascii); tlen -= len; From cfc44a4d147ea605d66ccb917cc24467d15ff867 Mon Sep 17 00:00:00 2001 From: WANG Cong Date: Wed, 16 Nov 2016 10:27:02 -0800 Subject: [PATCH 723/792] net: check dead netns for peernet2id_alloc() Andrei reports we still allocate netns ID from idr after we destroy it in cleanup_net(). cleanup_net(): ... idr_destroy(&net->netns_ids); ... list_for_each_entry_reverse(ops, &pernet_list, list) ops_exit_list(ops, &net_exit_list); -> rollback_registered_many() -> rtmsg_ifinfo_build_skb() -> rtnl_fill_ifinfo() -> peernet2id_alloc() After that point we should not even access net->netns_ids, we should check the death of the current netns as early as we can in peernet2id_alloc(). For net-next we can consider to avoid sending rtmsg totally, it is a good optimization for netns teardown path. Fixes: 0c7aecd4bde4 ("netns: add rtnl cmd to add and get peer netns ids") Reported-by: Andrei Vagin Cc: Nicolas Dichtel Signed-off-by: Cong Wang Acked-by: Andrei Vagin Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller --- net/core/net_namespace.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c index f61c0e02a413..7001da910c6b 100644 --- a/net/core/net_namespace.c +++ b/net/core/net_namespace.c @@ -219,6 +219,8 @@ int peernet2id_alloc(struct net *net, struct net *peer) bool alloc; int id; + if (atomic_read(&net->count) == 0) + return NETNSA_NSID_NOT_ASSIGNED; spin_lock_irqsave(&net->nsid_lock, flags); alloc = atomic_read(&peer->count) == 0 ? false : true; id = __peernet2id_alloc(net, peer, &alloc); From 48c1699d5335bc045b50989a06b1c526b17a25ff Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 16 Nov 2016 15:20:36 +0100 Subject: [PATCH 724/792] of_mdio: fix node leak in of_phy_register_fixed_link error path Make sure to drop the of_node reference also on failure to parse the speed property in of_phy_register_fixed_link(). Fixes: 3be2a49e5c08 ("of: provide a binding for fixed link PHYs") Signed-off-by: Johan Hovold Signed-off-by: David S. Miller --- drivers/of/of_mdio.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c index b470f7e3521d..8f4648383fb2 100644 --- a/drivers/of/of_mdio.c +++ b/drivers/of/of_mdio.c @@ -456,8 +456,11 @@ int of_phy_register_fixed_link(struct device_node *np) status.link = 1; status.duplex = of_property_read_bool(fixed_link_node, "full-duplex"); - if (of_property_read_u32(fixed_link_node, "speed", &status.speed)) + if (of_property_read_u32(fixed_link_node, "speed", + &status.speed)) { + of_node_put(fixed_link_node); return -EINVAL; + } status.pause = of_property_read_bool(fixed_link_node, "pause"); status.asym_pause = of_property_read_bool(fixed_link_node, "asym-pause"); From 3ae30f4ce65e9d4de274b1472169ab3c27f5c666 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 16 Nov 2016 15:20:37 +0100 Subject: [PATCH 725/792] of_mdio: fix device reference leak in of_phy_find_device Make sure to drop the reference taken by bus_find_device() before returning NULL from of_phy_find_device() when the found device is not a PHY. Fixes: 6ed742363b9c ("of: of_mdio: Ensure mdio device is a PHY") Signed-off-by: Johan Hovold Signed-off-by: David S. Miller --- drivers/of/of_mdio.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c index 8f4648383fb2..5a3145a02547 100644 --- a/drivers/of/of_mdio.c +++ b/drivers/of/of_mdio.c @@ -292,6 +292,7 @@ struct phy_device *of_phy_find_device(struct device_node *phy_np) mdiodev = to_mdio_device(d); if (mdiodev->flags & MDIO_DEVICE_FLAG_PHY) return to_phy_device(d); + put_device(d); } return NULL; From 13c9d934a5a1d04f055c20c2253090e9afd9a5d1 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 16 Nov 2016 15:20:38 +0100 Subject: [PATCH 726/792] net: phy: fixed_phy: fix of_node leak in fixed_phy_unregister Make sure to drop the of_node reference taken in fixed_phy_register() when deregistering a PHY. Fixes: a75951217472 ("net: phy: extend fixed driver with fixed_phy_register()") Signed-off-by: Johan Hovold Signed-off-by: David S. Miller --- drivers/net/phy/fixed_phy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/phy/fixed_phy.c b/drivers/net/phy/fixed_phy.c index c649c101bbab..eb5167210681 100644 --- a/drivers/net/phy/fixed_phy.c +++ b/drivers/net/phy/fixed_phy.c @@ -279,7 +279,7 @@ EXPORT_SYMBOL_GPL(fixed_phy_register); void fixed_phy_unregister(struct phy_device *phy) { phy_device_remove(phy); - + of_node_put(phy->mdio.dev.of_node); fixed_phy_del(phy->mdio.addr); } EXPORT_SYMBOL_GPL(fixed_phy_unregister); From b5c2d49544e5930c96e2632a7eece3f4325a1888 Mon Sep 17 00:00:00 2001 From: Paolo Abeni Date: Wed, 16 Nov 2016 16:26:46 +0100 Subject: [PATCH 727/792] ip6_tunnel: disable caching when the traffic class is inherited If an ip6 tunnel is configured to inherit the traffic class from the inner header, the dst_cache must be disabled or it will foul the policy routing. The issue is apprently there since at leat Linux-2.6.12-rc2. Reported-by: Liam McBirnie Cc: Liam McBirnie Acked-by: Hannes Frederic Sowa Signed-off-by: Paolo Abeni Signed-off-by: David S. Miller --- net/ipv6/ip6_tunnel.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c index 87784560dc46..0a4759b89da2 100644 --- a/net/ipv6/ip6_tunnel.c +++ b/net/ipv6/ip6_tunnel.c @@ -1034,6 +1034,7 @@ int ip6_tnl_xmit(struct sk_buff *skb, struct net_device *dev, __u8 dsfield, int mtu; unsigned int psh_hlen = sizeof(struct ipv6hdr) + t->encap_hlen; unsigned int max_headroom = psh_hlen; + bool use_cache = false; u8 hop_limit; int err = -1; @@ -1066,7 +1067,15 @@ int ip6_tnl_xmit(struct sk_buff *skb, struct net_device *dev, __u8 dsfield, memcpy(&fl6->daddr, addr6, sizeof(fl6->daddr)); neigh_release(neigh); - } else if (!fl6->flowi6_mark) + } else if (!(t->parms.flags & + (IP6_TNL_F_USE_ORIG_TCLASS | IP6_TNL_F_USE_ORIG_FWMARK))) { + /* enable the cache only only if the routing decision does + * not depend on the current inner header value + */ + use_cache = true; + } + + if (use_cache) dst = dst_cache_get(&t->dst_cache); if (!ip6_tnl_xmit_ctl(t, &fl6->saddr, &fl6->daddr)) @@ -1150,7 +1159,7 @@ route_lookup: if (t->encap.type != TUNNEL_ENCAP_NONE) goto tx_err_dst_release; } else { - if (!fl6->flowi6_mark && ndst) + if (use_cache && ndst) dst_cache_set_ip6(&t->dst_cache, ndst, &fl6->saddr); } skb_dst_set(skb, dst); From 5d1904204c99596b50a700f092fe49d78edba400 Mon Sep 17 00:00:00 2001 From: Aaron Lu Date: Thu, 10 Nov 2016 17:16:33 +0800 Subject: [PATCH 728/792] mremap: fix race between mremap() and page cleanning Prior to 3.15, there was a race between zap_pte_range() and page_mkclean() where writes to a page could be lost. Dave Hansen discovered by inspection that there is a similar race between move_ptes() and page_mkclean(). We've been able to reproduce the issue by enlarging the race window with a msleep(), but have not been able to hit it without modifying the code. So, we think it's a real issue, but is difficult or impossible to hit in practice. The zap_pte_range() issue is fixed by commit 1cf35d47712d("mm: split 'tlb_flush_mmu()' into tlb flushing and memory freeing parts"). And this patch is to fix the race between page_mkclean() and mremap(). Here is one possible way to hit the race: suppose a process mmapped a file with READ | WRITE and SHARED, it has two threads and they are bound to 2 different CPUs, e.g. CPU1 and CPU2. mmap returned X, then thread 1 did a write to addr X so that CPU1 now has a writable TLB for addr X on it. Thread 2 starts mremaping from addr X to Y while thread 1 cleaned the page and then did another write to the old addr X again. The 2nd write from thread 1 could succeed but the value will get lost. thread 1 thread 2 (bound to CPU1) (bound to CPU2) 1: write 1 to addr X to get a writeable TLB on this CPU 2: mremap starts 3: move_ptes emptied PTE for addr X and setup new PTE for addr Y and then dropped PTL for X and Y 4: page laundering for N by doing fadvise FADV_DONTNEED. When done, pageframe N is deemed clean. 5: *write 2 to addr X 6: tlb flush for addr X 7: munmap (Y, pagesize) to make the page unmapped 8: fadvise with FADV_DONTNEED again to kick the page off the pagecache 9: pread the page from file to verify the value. If 1 is there, it means we have lost the written 2. *the write may or may not cause segmentation fault, it depends on if the TLB is still on the CPU. Please note that this is only one specific way of how the race could occur, it didn't mean that the race could only occur in exact the above config, e.g. more than 2 threads could be involved and fadvise() could be done in another thread, etc. For anonymous pages, they could race between mremap() and page reclaim: THP: a huge PMD is moved by mremap to a new huge PMD, then the new huge PMD gets unmapped/splitted/pagedout before the flush tlb happened for the old huge PMD in move_page_tables() and we could still write data to it. The normal anonymous page has similar situation. To fix this, check for any dirty PTE in move_ptes()/move_huge_pmd() and if any, did the flush before dropping the PTL. If we did the flush for every move_ptes()/move_huge_pmd() call then we do not need to do the flush in move_pages_tables() for the whole range. But if we didn't, we still need to do the whole range flush. Alternatively, we can track which part of the range is flushed in move_ptes()/move_huge_pmd() and which didn't to avoid flushing the whole range in move_page_tables(). But that would require multiple tlb flushes for the different sub-ranges and should be less efficient than the single whole range flush. KBuild test on my Sandybridge desktop doesn't show any noticeable change. v4.9-rc4: real 5m14.048s user 32m19.800s sys 4m50.320s With this commit: real 5m13.888s user 32m19.330s sys 4m51.200s Reported-by: Dave Hansen Signed-off-by: Aaron Lu Signed-off-by: Linus Torvalds --- include/linux/huge_mm.h | 2 +- mm/huge_memory.c | 9 ++++++++- mm/mremap.c | 30 +++++++++++++++++++++--------- 3 files changed, 30 insertions(+), 11 deletions(-) diff --git a/include/linux/huge_mm.h b/include/linux/huge_mm.h index 9b9f65d99873..e35e6de633b9 100644 --- a/include/linux/huge_mm.h +++ b/include/linux/huge_mm.h @@ -22,7 +22,7 @@ extern int mincore_huge_pmd(struct vm_area_struct *vma, pmd_t *pmd, unsigned char *vec); extern bool move_huge_pmd(struct vm_area_struct *vma, unsigned long old_addr, unsigned long new_addr, unsigned long old_end, - pmd_t *old_pmd, pmd_t *new_pmd); + pmd_t *old_pmd, pmd_t *new_pmd, bool *need_flush); extern int change_huge_pmd(struct vm_area_struct *vma, pmd_t *pmd, unsigned long addr, pgprot_t newprot, int prot_numa); diff --git a/mm/huge_memory.c b/mm/huge_memory.c index cdcd25cb30fe..eff3de359d50 100644 --- a/mm/huge_memory.c +++ b/mm/huge_memory.c @@ -1426,11 +1426,12 @@ int zap_huge_pmd(struct mmu_gather *tlb, struct vm_area_struct *vma, bool move_huge_pmd(struct vm_area_struct *vma, unsigned long old_addr, unsigned long new_addr, unsigned long old_end, - pmd_t *old_pmd, pmd_t *new_pmd) + pmd_t *old_pmd, pmd_t *new_pmd, bool *need_flush) { spinlock_t *old_ptl, *new_ptl; pmd_t pmd; struct mm_struct *mm = vma->vm_mm; + bool force_flush = false; if ((old_addr & ~HPAGE_PMD_MASK) || (new_addr & ~HPAGE_PMD_MASK) || @@ -1455,6 +1456,8 @@ bool move_huge_pmd(struct vm_area_struct *vma, unsigned long old_addr, new_ptl = pmd_lockptr(mm, new_pmd); if (new_ptl != old_ptl) spin_lock_nested(new_ptl, SINGLE_DEPTH_NESTING); + if (pmd_present(*old_pmd) && pmd_dirty(*old_pmd)) + force_flush = true; pmd = pmdp_huge_get_and_clear(mm, old_addr, old_pmd); VM_BUG_ON(!pmd_none(*new_pmd)); @@ -1467,6 +1470,10 @@ bool move_huge_pmd(struct vm_area_struct *vma, unsigned long old_addr, set_pmd_at(mm, new_addr, new_pmd, pmd_mksoft_dirty(pmd)); if (new_ptl != old_ptl) spin_unlock(new_ptl); + if (force_flush) + flush_tlb_range(vma, old_addr, old_addr + PMD_SIZE); + else + *need_flush = true; spin_unlock(old_ptl); return true; } diff --git a/mm/mremap.c b/mm/mremap.c index da22ad2a5678..6ccecc03f56a 100644 --- a/mm/mremap.c +++ b/mm/mremap.c @@ -104,11 +104,13 @@ static pte_t move_soft_dirty_pte(pte_t pte) static void move_ptes(struct vm_area_struct *vma, pmd_t *old_pmd, unsigned long old_addr, unsigned long old_end, struct vm_area_struct *new_vma, pmd_t *new_pmd, - unsigned long new_addr, bool need_rmap_locks) + unsigned long new_addr, bool need_rmap_locks, bool *need_flush) { struct mm_struct *mm = vma->vm_mm; pte_t *old_pte, *new_pte, pte; spinlock_t *old_ptl, *new_ptl; + bool force_flush = false; + unsigned long len = old_end - old_addr; /* * When need_rmap_locks is true, we take the i_mmap_rwsem and anon_vma @@ -146,6 +148,14 @@ static void move_ptes(struct vm_area_struct *vma, pmd_t *old_pmd, new_pte++, new_addr += PAGE_SIZE) { if (pte_none(*old_pte)) continue; + + /* + * We are remapping a dirty PTE, make sure to + * flush TLB before we drop the PTL for the + * old PTE or we may race with page_mkclean(). + */ + if (pte_present(*old_pte) && pte_dirty(*old_pte)) + force_flush = true; pte = ptep_get_and_clear(mm, old_addr, old_pte); pte = move_pte(pte, new_vma->vm_page_prot, old_addr, new_addr); pte = move_soft_dirty_pte(pte); @@ -156,6 +166,10 @@ static void move_ptes(struct vm_area_struct *vma, pmd_t *old_pmd, if (new_ptl != old_ptl) spin_unlock(new_ptl); pte_unmap(new_pte - 1); + if (force_flush) + flush_tlb_range(vma, old_end - len, old_end); + else + *need_flush = true; pte_unmap_unlock(old_pte - 1, old_ptl); if (need_rmap_locks) drop_rmap_locks(vma); @@ -201,13 +215,12 @@ unsigned long move_page_tables(struct vm_area_struct *vma, if (need_rmap_locks) take_rmap_locks(vma); moved = move_huge_pmd(vma, old_addr, new_addr, - old_end, old_pmd, new_pmd); + old_end, old_pmd, new_pmd, + &need_flush); if (need_rmap_locks) drop_rmap_locks(vma); - if (moved) { - need_flush = true; + if (moved) continue; - } } split_huge_pmd(vma, old_pmd, old_addr); if (pmd_trans_unstable(old_pmd)) @@ -220,11 +233,10 @@ unsigned long move_page_tables(struct vm_area_struct *vma, extent = next - new_addr; if (extent > LATENCY_LIMIT) extent = LATENCY_LIMIT; - move_ptes(vma, old_pmd, old_addr, old_addr + extent, - new_vma, new_pmd, new_addr, need_rmap_locks); - need_flush = true; + move_ptes(vma, old_pmd, old_addr, old_addr + extent, new_vma, + new_pmd, new_addr, need_rmap_locks, &need_flush); } - if (likely(need_flush)) + if (need_flush) flush_tlb_range(vma, old_end-len, old_addr); mmu_notifier_invalidate_range_end(vma->vm_mm, mmun_start, mmun_end); From 30a391a13ab9215d7569da4e1773c5bb4deed96d Mon Sep 17 00:00:00 2001 From: Roman Mashak Date: Wed, 16 Nov 2016 17:16:10 -0500 Subject: [PATCH 729/792] net sched filters: pass netlink message flags in event notification Userland client should be able to read an event, and reflect it back to the kernel, therefore it needs to extract complete set of netlink flags. For example, this will allow "tc monitor" to distinguish Add and Replace operations. Signed-off-by: Roman Mashak Signed-off-by: Jamal Hadi Salim Signed-off-by: David S. Miller --- net/sched/cls_api.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c index 2b2a7974e4bb..8e93d4afe5ea 100644 --- a/net/sched/cls_api.c +++ b/net/sched/cls_api.c @@ -112,7 +112,7 @@ static void tfilter_notify_chain(struct net *net, struct sk_buff *oskb, for (it_chain = chain; (tp = rtnl_dereference(*it_chain)) != NULL; it_chain = &tp->next) - tfilter_notify(net, oskb, n, tp, 0, event, false); + tfilter_notify(net, oskb, n, tp, n->nlmsg_flags, event, false); } /* Select new prio value from the range, managed by kernel. */ @@ -430,7 +430,8 @@ static int tfilter_notify(struct net *net, struct sk_buff *oskb, if (!skb) return -ENOBUFS; - if (tcf_fill_node(net, skb, tp, fh, portid, n->nlmsg_seq, 0, event) <= 0) { + if (tcf_fill_node(net, skb, tp, fh, portid, n->nlmsg_seq, + n->nlmsg_flags, event) <= 0) { kfree_skb(skb); return -EINVAL; } From e9f01049d1ea4679a3258b8423fe54bae424ee0e Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 18 Nov 2016 10:26:39 +1000 Subject: [PATCH 730/792] Revert "drm/mediatek: fix a typo of OD_CFG to OD_RELAYMODE" This reverts commit 83ba62bc700bab710b22be3a1bf6cf973f754273. Signed-off-by: Dave Airlie --- drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c index aa5f20fabd10..df33b3ca6ffd 100644 --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c @@ -123,7 +123,7 @@ static void mtk_od_config(struct mtk_ddp_comp *comp, unsigned int w, unsigned int bpc) { writel(w << 16 | h, comp->regs + DISP_OD_SIZE); - writel(OD_RELAYMODE, comp->regs + OD_CFG); + writel(OD_RELAYMODE, comp->regs + OD_RELAYMODE); mtk_dither_set(comp, bpc, DISP_OD_CFG); } From 7d40c2cf080950eab63a0747482027f5f1dae0d3 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 18 Nov 2016 10:27:00 +1000 Subject: [PATCH 731/792] Revert "drm/mediatek: set vblank_disable_allowed to true" This reverts commit f752fff611b99f5679224f3990a1f531ea64b1ec. Signed-off-by: Dave Airlie --- drivers/gpu/drm/mediatek/mtk_drm_drv.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c index 0b2ae47eb52c..cf83f6507ec8 100644 --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c @@ -217,7 +217,6 @@ static int mtk_drm_kms_init(struct drm_device *drm) if (ret < 0) goto err_component_unbind; - drm->vblank_disable_allowed = true; drm_kms_helper_poll_init(drm); drm_mode_config_reset(drm); From 1c8018f7a7a60a649260fdd7e8645a356299e920 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?C=C3=A9dric=20Le=20Goater?= Date: Wed, 2 Nov 2016 08:57:04 +0100 Subject: [PATCH 732/792] ipmi/bt-bmc: change compatible node to 'aspeed, ast2400-ibt-bmc' MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The Aspeed SoCs have two BT interfaces : one is IPMI compliant and the other is H8S/2168 compliant. The current ipmi/bt-bmc driver implements the IPMI version and we should reflect its nature in the compatible node name using 'aspeed,ast2400-ibt-bmc' instead of 'aspeed,ast2400-bt-bmc'. The latter should be used for a H8S interface driver if it is implemented one day. Signed-off-by: Cédric Le Goater Signed-off-by: Olof Johansson --- .../{aspeed,ast2400-bt-bmc.txt => aspeed,ast2400-ibt-bmc.txt} | 4 ++-- drivers/char/ipmi/bt-bmc.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) rename Documentation/devicetree/bindings/ipmi/{aspeed,ast2400-bt-bmc.txt => aspeed,ast2400-ibt-bmc.txt} (85%) diff --git a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-bt-bmc.txt b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt similarity index 85% rename from Documentation/devicetree/bindings/ipmi/aspeed,ast2400-bt-bmc.txt rename to Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt index fbbacd958240..6f28969af9dc 100644 --- a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-bt-bmc.txt +++ b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt @@ -6,7 +6,7 @@ perform in-band IPMI communication with their host. Required properties: -- compatible : should be "aspeed,ast2400-bt-bmc" +- compatible : should be "aspeed,ast2400-ibt-bmc" - reg: physical address and size of the registers Optional properties: @@ -17,7 +17,7 @@ Optional properties: Example: ibt@1e789140 { - compatible = "aspeed,ast2400-bt-bmc"; + compatible = "aspeed,ast2400-ibt-bmc"; reg = <0x1e789140 0x18>; interrupts = <8>; }; diff --git a/drivers/char/ipmi/bt-bmc.c b/drivers/char/ipmi/bt-bmc.c index b49e61320952..fc9e8891eae3 100644 --- a/drivers/char/ipmi/bt-bmc.c +++ b/drivers/char/ipmi/bt-bmc.c @@ -484,7 +484,7 @@ static int bt_bmc_remove(struct platform_device *pdev) } static const struct of_device_id bt_bmc_match[] = { - { .compatible = "aspeed,ast2400-bt-bmc" }, + { .compatible = "aspeed,ast2400-ibt-bmc" }, { }, }; @@ -502,4 +502,4 @@ module_platform_driver(bt_bmc_driver); MODULE_DEVICE_TABLE(of, bt_bmc_match); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Alistair Popple "); -MODULE_DESCRIPTION("Linux device interface to the BT interface"); +MODULE_DESCRIPTION("Linux device interface to the IPMI BT interface"); From 68d85d0e03eab60c238ebe673c7cea1cf70275d4 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sat, 29 Oct 2016 16:31:17 +0000 Subject: [PATCH 733/792] i2c: digicolor: use clk_disable_unprepare instead of clk_unprepare since clk_prepare_enable() is used to get i2c->clk, we should use clk_disable_unprepare() to release it for the error path. Signed-off-by: Wei Yongjun Acked-by: Baruch Siach Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-digicolor.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-digicolor.c b/drivers/i2c/busses/i2c-digicolor.c index 49f2084f7bb5..50813a24c541 100644 --- a/drivers/i2c/busses/i2c-digicolor.c +++ b/drivers/i2c/busses/i2c-digicolor.c @@ -347,7 +347,7 @@ static int dc_i2c_probe(struct platform_device *pdev) ret = i2c_add_adapter(&i2c->adap); if (ret < 0) { - clk_unprepare(i2c->clk); + clk_disable_unprepare(i2c->clk); return ret; } From 96ed1fe511a8b4948e53f3bad431d8737e8f231f Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Fri, 18 Nov 2016 14:08:56 +1100 Subject: [PATCH 734/792] powerpc/mm/radix: Invalidate ERAT on tlbiel for POWER9 DD1 On POWER9 DD1, when we do a local TLB invalidate we also need to explicitly invalidate the ERAT. Signed-off-by: Michael Neuling Signed-off-by: Michael Ellerman --- arch/powerpc/include/asm/ppc-opcode.h | 1 + arch/powerpc/mm/tlb-radix.c | 4 ++++ 2 files changed, 5 insertions(+) diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h index 0132831b3081..c56ea8c84abb 100644 --- a/arch/powerpc/include/asm/ppc-opcode.h +++ b/arch/powerpc/include/asm/ppc-opcode.h @@ -460,5 +460,6 @@ #define PPC_SLBIA(IH) stringify_in_c(.long PPC_INST_SLBIA | \ ((IH & 0x7) << 21)) +#define PPC_INVALIDATE_ERAT PPC_SLBIA(7) #endif /* _ASM_POWERPC_PPC_OPCODE_H */ diff --git a/arch/powerpc/mm/tlb-radix.c b/arch/powerpc/mm/tlb-radix.c index bda8c43be78a..3493cf4e0452 100644 --- a/arch/powerpc/mm/tlb-radix.c +++ b/arch/powerpc/mm/tlb-radix.c @@ -50,6 +50,8 @@ static inline void _tlbiel_pid(unsigned long pid, unsigned long ric) for (set = 0; set < POWER9_TLB_SETS_RADIX ; set++) { __tlbiel_pid(pid, set, ric); } + if (cpu_has_feature(CPU_FTR_POWER9_DD1)) + asm volatile(PPC_INVALIDATE_ERAT : : :"memory"); return; } @@ -83,6 +85,8 @@ static inline void _tlbiel_va(unsigned long va, unsigned long pid, asm volatile(PPC_TLBIEL(%0, %4, %3, %2, %1) : : "r"(rb), "i"(r), "i"(prs), "i"(ric), "r"(rs) : "memory"); asm volatile("ptesync": : :"memory"); + if (cpu_has_feature(CPU_FTR_POWER9_DD1)) + asm volatile(PPC_INVALIDATE_ERAT : : :"memory"); } static inline void _tlbie_va(unsigned long va, unsigned long pid, From 9853a55ef1bb66d7411136046060bbfb69c714fa Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 15 Nov 2016 12:05:11 +0100 Subject: [PATCH 735/792] cfg80211: limit scan results cache size It's possible to make scanning consume almost arbitrary amounts of memory, e.g. by sending beacon frames with random BSSIDs at high rates while somebody is scanning. Limit the number of BSS table entries we're willing to cache to 1000, limiting maximum memory usage to maybe 4-5MB, but lower in practice - that would be the case for having both full-sized beacon and probe response frames for each entry; this seems not possible in practice, so a limit of 1000 entries will likely be closer to 0.5 MB. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg --- net/wireless/core.h | 1 + net/wireless/scan.c | 69 +++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 70 insertions(+) diff --git a/net/wireless/core.h b/net/wireless/core.h index 08d2e948c9ad..f0c0c8a48c92 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -71,6 +71,7 @@ struct cfg80211_registered_device { struct list_head bss_list; struct rb_root bss_tree; u32 bss_generation; + u32 bss_entries; struct cfg80211_scan_request *scan_req; /* protected by RTNL */ struct sk_buff *scan_msg; struct cfg80211_sched_scan_request __rcu *sched_scan_req; diff --git a/net/wireless/scan.c b/net/wireless/scan.c index b5bd58d0f731..35ad69fd0838 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -57,6 +57,19 @@ * also linked into the probe response struct. */ +/* + * Limit the number of BSS entries stored in mac80211. Each one is + * a bit over 4k at most, so this limits to roughly 4-5M of memory. + * If somebody wants to really attack this though, they'd likely + * use small beacons, and only one type of frame, limiting each of + * the entries to a much smaller size (in order to generate more + * entries in total, so overhead is bigger.) + */ +static int bss_entries_limit = 1000; +module_param(bss_entries_limit, int, 0644); +MODULE_PARM_DESC(bss_entries_limit, + "limit to number of scan BSS entries (per wiphy, default 1000)"); + #define IEEE80211_SCAN_RESULT_EXPIRE (30 * HZ) static void bss_free(struct cfg80211_internal_bss *bss) @@ -137,6 +150,10 @@ static bool __cfg80211_unlink_bss(struct cfg80211_registered_device *rdev, list_del_init(&bss->list); rb_erase(&bss->rbn, &rdev->bss_tree); + rdev->bss_entries--; + WARN_ONCE((rdev->bss_entries == 0) ^ list_empty(&rdev->bss_list), + "rdev bss entries[%d]/list[empty:%d] corruption\n", + rdev->bss_entries, list_empty(&rdev->bss_list)); bss_ref_put(rdev, bss); return true; } @@ -163,6 +180,40 @@ static void __cfg80211_bss_expire(struct cfg80211_registered_device *rdev, rdev->bss_generation++; } +static bool cfg80211_bss_expire_oldest(struct cfg80211_registered_device *rdev) +{ + struct cfg80211_internal_bss *bss, *oldest = NULL; + bool ret; + + lockdep_assert_held(&rdev->bss_lock); + + list_for_each_entry(bss, &rdev->bss_list, list) { + if (atomic_read(&bss->hold)) + continue; + + if (!list_empty(&bss->hidden_list) && + !bss->pub.hidden_beacon_bss) + continue; + + if (oldest && time_before(oldest->ts, bss->ts)) + continue; + oldest = bss; + } + + if (WARN_ON(!oldest)) + return false; + + /* + * The callers make sure to increase rdev->bss_generation if anything + * gets removed (and a new entry added), so there's no need to also do + * it here. + */ + + ret = __cfg80211_unlink_bss(rdev, oldest); + WARN_ON(!ret); + return ret; +} + void ___cfg80211_scan_done(struct cfg80211_registered_device *rdev, bool send_message) { @@ -689,6 +740,7 @@ static bool cfg80211_combine_bsses(struct cfg80211_registered_device *rdev, const u8 *ie; int i, ssidlen; u8 fold = 0; + u32 n_entries = 0; ies = rcu_access_pointer(new->pub.beacon_ies); if (WARN_ON(!ies)) @@ -712,6 +764,12 @@ static bool cfg80211_combine_bsses(struct cfg80211_registered_device *rdev, /* This is the bad part ... */ list_for_each_entry(bss, &rdev->bss_list, list) { + /* + * we're iterating all the entries anyway, so take the + * opportunity to validate the list length accounting + */ + n_entries++; + if (!ether_addr_equal(bss->pub.bssid, new->pub.bssid)) continue; if (bss->pub.channel != new->pub.channel) @@ -740,6 +798,10 @@ static bool cfg80211_combine_bsses(struct cfg80211_registered_device *rdev, new->pub.beacon_ies); } + WARN_ONCE(n_entries != rdev->bss_entries, + "rdev bss entries[%d]/list[len:%d] corruption\n", + rdev->bss_entries, n_entries); + return true; } @@ -894,7 +956,14 @@ cfg80211_bss_update(struct cfg80211_registered_device *rdev, } } + if (rdev->bss_entries >= bss_entries_limit && + !cfg80211_bss_expire_oldest(rdev)) { + kfree(new); + goto drop; + } + list_add_tail(&new->list, &rdev->bss_list); + rdev->bss_entries++; rb_insert_bss(rdev, new); found = new; } From c2d75e03d6307bda0e14b616818a6f7b09fd623a Mon Sep 17 00:00:00 2001 From: Josh Poimboeuf Date: Thu, 17 Nov 2016 09:57:23 -0600 Subject: [PATCH 736/792] x86/unwind: Prevent KASAN false positive warnings in guess unwinder The guess unwinder scans the entire stack, which can cause KASAN "stack-out-of-bounds" false positive warnings. Tell KASAN to ignore it. Reported-by: Peter Zijlstra Signed-off-by: Josh Poimboeuf Cc: Andy Lutomirski Cc: Arnaldo Carvalho de Melo Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Stephane Eranian Cc: Thomas Gleixner Cc: Vince Weaver Cc: davej@codemonkey.org.uk Cc: dvyukov@google.com Link: http://lkml.kernel.org/r/61939c0b2b2d63ce97ba59cba3b00fd47c2962cf.1479398226.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/unwind_guess.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/unwind_guess.c b/arch/x86/kernel/unwind_guess.c index 2d721e533cf4..b80e8bf43cc6 100644 --- a/arch/x86/kernel/unwind_guess.c +++ b/arch/x86/kernel/unwind_guess.c @@ -7,11 +7,13 @@ unsigned long unwind_get_return_address(struct unwind_state *state) { + unsigned long addr = READ_ONCE_NOCHECK(*state->sp); + if (unwind_done(state)) return 0; return ftrace_graph_ret_addr(state->task, &state->graph_idx, - *state->sp, state->sp); + addr, state->sp); } EXPORT_SYMBOL_GPL(unwind_get_return_address); @@ -23,8 +25,10 @@ bool unwind_next_frame(struct unwind_state *state) return false; do { + unsigned long addr = READ_ONCE_NOCHECK(*state->sp); + for (state->sp++; state->sp < info->end; state->sp++) - if (__kernel_text_address(*state->sp)) + if (__kernel_text_address(addr)) return true; state->sp = info->next_sp; From 91e08ab0c8515450258d7ad9033bfe69bebad25a Mon Sep 17 00:00:00 2001 From: Josh Poimboeuf Date: Thu, 17 Nov 2016 09:57:24 -0600 Subject: [PATCH 737/792] x86/dumpstack: Prevent KASAN false positive warnings The oops stack dump code scans the entire stack, which can cause KASAN "stack-out-of-bounds" false positive warnings. Tell KASAN to ignore it. Signed-off-by: Josh Poimboeuf Cc: Andy Lutomirski Cc: Arnaldo Carvalho de Melo Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Thomas Gleixner Cc: Vince Weaver Cc: davej@codemonkey.org.uk Cc: dvyukov@google.com Link: http://lkml.kernel.org/r/5f6e80c4b0c7f7f0b6211900847a247cdaad753c.1479398226.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/dumpstack.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c index 9b7cf5c28f5f..85f854b98a9d 100644 --- a/arch/x86/kernel/dumpstack.c +++ b/arch/x86/kernel/dumpstack.c @@ -112,7 +112,7 @@ void show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs, for (; stack < stack_info.end; stack++) { unsigned long real_addr; int reliable = 0; - unsigned long addr = *stack; + unsigned long addr = READ_ONCE_NOCHECK(*stack); unsigned long *ret_addr_p = unwind_get_return_address_ptr(&state); From 9e3f7a29694049edd728e2400ab57ad7553e5aa9 Mon Sep 17 00:00:00 2001 From: Wei Huang Date: Wed, 16 Nov 2016 09:20:57 +0000 Subject: [PATCH 738/792] arm64: KVM: pmu: Fix AArch32 cycle counter access We're missing the handling code for the cycle counter accessed from a 32bit guest, leading to unexpected results. Cc: stable@vger.kernel.org # 4.6+ Signed-off-by: Wei Huang Signed-off-by: Marc Zyngier --- arch/arm64/kvm/sys_regs.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c index f302fdb3a030..87e7e6608cd8 100644 --- a/arch/arm64/kvm/sys_regs.c +++ b/arch/arm64/kvm/sys_regs.c @@ -597,8 +597,14 @@ static bool access_pmu_evcntr(struct kvm_vcpu *vcpu, idx = ARMV8_PMU_CYCLE_IDX; } else { - BUG(); + return false; } + } else if (r->CRn == 0 && r->CRm == 9) { + /* PMCCNTR */ + if (pmu_access_event_counter_el0_disabled(vcpu)) + return false; + + idx = ARMV8_PMU_CYCLE_IDX; } else if (r->CRn == 14 && (r->CRm & 12) == 8) { /* PMEVCNTRn_EL0 */ if (pmu_access_event_counter_el0_disabled(vcpu)) @@ -606,7 +612,7 @@ static bool access_pmu_evcntr(struct kvm_vcpu *vcpu, idx = ((r->CRm & 3) << 3) | (r->Op2 & 7); } else { - BUG(); + return false; } if (!pmu_counter_idx_valid(vcpu, idx)) From b112c84a6ff035271d41d548c10215f18443d6a6 Mon Sep 17 00:00:00 2001 From: Wei Huang Date: Wed, 16 Nov 2016 11:09:20 -0600 Subject: [PATCH 739/792] KVM: arm64: Fix the issues when guest PMCCFILTR is configured KVM calls kvm_pmu_set_counter_event_type() when PMCCFILTR is configured. But this function can't deals with PMCCFILTR correctly because the evtCount bits of PMCCFILTR, which is reserved 0, conflits with the SW_INCR event type of other PMXEVTYPER registers. To fix it, when eventsel == 0, this function shouldn't return immediately; instead it needs to check further if select_idx is ARMV8_PMU_CYCLE_IDX. Another issue is that KVM shouldn't copy the eventsel bits of PMCCFILTER blindly to attr.config. Instead it ought to convert the request to the "cpu cycle" event type (i.e. 0x11). To support this patch and to prevent duplicated definitions, a limited set of ARMv8 perf event types were relocated from perf_event.c to asm/perf_event.h. Cc: stable@vger.kernel.org # 4.6+ Acked-by: Will Deacon Signed-off-by: Wei Huang Signed-off-by: Marc Zyngier --- arch/arm64/include/asm/perf_event.h | 10 +++++++++- arch/arm64/kernel/perf_event.c | 10 +--------- virt/kvm/arm/pmu.c | 8 +++++--- 3 files changed, 15 insertions(+), 13 deletions(-) diff --git a/arch/arm64/include/asm/perf_event.h b/arch/arm64/include/asm/perf_event.h index 2065f46fa740..38b6a2b49d68 100644 --- a/arch/arm64/include/asm/perf_event.h +++ b/arch/arm64/include/asm/perf_event.h @@ -46,7 +46,15 @@ #define ARMV8_PMU_EVTYPE_MASK 0xc800ffff /* Mask for writable bits */ #define ARMV8_PMU_EVTYPE_EVENT 0xffff /* Mask for EVENT bits */ -#define ARMV8_PMU_EVTYPE_EVENT_SW_INCR 0 /* Software increment event */ +/* + * PMUv3 event types: required events + */ +#define ARMV8_PMUV3_PERFCTR_SW_INCR 0x00 +#define ARMV8_PMUV3_PERFCTR_L1D_CACHE_REFILL 0x03 +#define ARMV8_PMUV3_PERFCTR_L1D_CACHE 0x04 +#define ARMV8_PMUV3_PERFCTR_BR_MIS_PRED 0x10 +#define ARMV8_PMUV3_PERFCTR_CPU_CYCLES 0x11 +#define ARMV8_PMUV3_PERFCTR_BR_PRED 0x12 /* * Event filters for PMUv3 diff --git a/arch/arm64/kernel/perf_event.c b/arch/arm64/kernel/perf_event.c index a9310a69fffd..57ae9d9ed9bb 100644 --- a/arch/arm64/kernel/perf_event.c +++ b/arch/arm64/kernel/perf_event.c @@ -31,17 +31,9 @@ /* * ARMv8 PMUv3 Performance Events handling code. - * Common event types. + * Common event types (some are defined in asm/perf_event.h). */ -/* Required events. */ -#define ARMV8_PMUV3_PERFCTR_SW_INCR 0x00 -#define ARMV8_PMUV3_PERFCTR_L1D_CACHE_REFILL 0x03 -#define ARMV8_PMUV3_PERFCTR_L1D_CACHE 0x04 -#define ARMV8_PMUV3_PERFCTR_BR_MIS_PRED 0x10 -#define ARMV8_PMUV3_PERFCTR_CPU_CYCLES 0x11 -#define ARMV8_PMUV3_PERFCTR_BR_PRED 0x12 - /* At least one of the following is required. */ #define ARMV8_PMUV3_PERFCTR_INST_RETIRED 0x08 #define ARMV8_PMUV3_PERFCTR_INST_SPEC 0x1B diff --git a/virt/kvm/arm/pmu.c b/virt/kvm/arm/pmu.c index 6e9c40eea208..69ccce308458 100644 --- a/virt/kvm/arm/pmu.c +++ b/virt/kvm/arm/pmu.c @@ -305,7 +305,7 @@ void kvm_pmu_software_increment(struct kvm_vcpu *vcpu, u64 val) continue; type = vcpu_sys_reg(vcpu, PMEVTYPER0_EL0 + i) & ARMV8_PMU_EVTYPE_EVENT; - if ((type == ARMV8_PMU_EVTYPE_EVENT_SW_INCR) + if ((type == ARMV8_PMUV3_PERFCTR_SW_INCR) && (enable & BIT(i))) { reg = vcpu_sys_reg(vcpu, PMEVCNTR0_EL0 + i) + 1; reg = lower_32_bits(reg); @@ -379,7 +379,8 @@ void kvm_pmu_set_counter_event_type(struct kvm_vcpu *vcpu, u64 data, eventsel = data & ARMV8_PMU_EVTYPE_EVENT; /* Software increment event does't need to be backed by a perf event */ - if (eventsel == ARMV8_PMU_EVTYPE_EVENT_SW_INCR) + if (eventsel == ARMV8_PMUV3_PERFCTR_SW_INCR && + select_idx != ARMV8_PMU_CYCLE_IDX) return; memset(&attr, 0, sizeof(struct perf_event_attr)); @@ -391,7 +392,8 @@ void kvm_pmu_set_counter_event_type(struct kvm_vcpu *vcpu, u64 data, attr.exclude_kernel = data & ARMV8_PMU_EXCLUDE_EL1 ? 1 : 0; attr.exclude_hv = 1; /* Don't count EL2 events */ attr.exclude_host = 1; /* Don't count host events */ - attr.config = eventsel; + attr.config = (select_idx == ARMV8_PMU_CYCLE_IDX) ? + ARMV8_PMUV3_PERFCTR_CPU_CYCLES : eventsel; counter = kvm_pmu_get_counter_value(vcpu, select_idx); /* The initial sample period (overflow count) of an event. */ From cac4a185405d4415eca269cae976438b44a37ae0 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Thu, 17 Nov 2016 15:46:23 +0530 Subject: [PATCH 740/792] powerpc/mm: Fix missing update of HID register on secondary CPUs We need to update on secondaries for the selected MMU mode. Fixes: ad410674f560 ("powerpc/mm: Update the HID bit when switching from radix to hash") Reported-by: Michael Neuling Signed-off-by: Aneesh Kumar K.V Signed-off-by: Michael Ellerman --- arch/powerpc/mm/hash_utils_64.c | 4 ++++ arch/powerpc/mm/pgtable-radix.c | 4 ++++ 2 files changed, 8 insertions(+) diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index 44d3c3a38e3e..5503078090cd 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -1029,6 +1029,10 @@ void hash__early_init_mmu_secondary(void) { /* Initialize hash table for that CPU */ if (!firmware_has_feature(FW_FEATURE_LPAR)) { + + if (cpu_has_feature(CPU_FTR_POWER9_DD1)) + update_hid_for_hash(); + if (!cpu_has_feature(CPU_FTR_ARCH_300)) mtspr(SPRN_SDR1, _SDR1); else diff --git a/arch/powerpc/mm/pgtable-radix.c b/arch/powerpc/mm/pgtable-radix.c index ed7bddc456b7..688b54517655 100644 --- a/arch/powerpc/mm/pgtable-radix.c +++ b/arch/powerpc/mm/pgtable-radix.c @@ -388,6 +388,10 @@ void radix__early_init_mmu_secondary(void) * update partition table control register and UPRT */ if (!firmware_has_feature(FW_FEATURE_LPAR)) { + + if (cpu_has_feature(CPU_FTR_POWER9_DD1)) + update_hid_for_radix(); + lpcr = mfspr(SPRN_LPCR); mtspr(SPRN_LPCR, lpcr | LPCR_UPRT | LPCR_HR); From a8348bca2944d397a528772f5c0ccb47a8b58af4 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Thu, 17 Nov 2016 22:07:58 +0800 Subject: [PATCH 741/792] crypto: algif_hash - Fix NULL hash crash with shash Recently algif_hash has been changed to allow null hashes. This triggers a bug when used with an shash algorithm whereby it will cause a crash during the digest operation. This patch fixes it by avoiding the digest operation and instead doing an init followed by a final which avoids the buggy code in shash. This patch also ensures that the result buffer is freed after an error so that it is not returned as a genuine hash result on the next recv call. The shash/ahash wrapper code will be fixed later to handle this case correctly. Fixes: 493b2ed3f760 ("crypto: algif_hash - Handle NULL hashes correctly") Signed-off-by: Herbert Xu Tested-by: Laura Abbott --- crypto/algif_hash.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/crypto/algif_hash.c b/crypto/algif_hash.c index 2d8466f9e49b..05e21b464433 100644 --- a/crypto/algif_hash.c +++ b/crypto/algif_hash.c @@ -214,23 +214,26 @@ static int hash_recvmsg(struct socket *sock, struct msghdr *msg, size_t len, ahash_request_set_crypt(&ctx->req, NULL, ctx->result, 0); - if (ctx->more) { + if (!result) { + err = af_alg_wait_for_completion( + crypto_ahash_init(&ctx->req), + &ctx->completion); + if (err) + goto unlock; + } + + if (!result || ctx->more) { ctx->more = 0; err = af_alg_wait_for_completion(crypto_ahash_final(&ctx->req), &ctx->completion); if (err) goto unlock; - } else if (!result) { - err = af_alg_wait_for_completion( - crypto_ahash_digest(&ctx->req), - &ctx->completion); } err = memcpy_to_msg(msg, ctx->result, len); - hash_free_result(sk, ctx); - unlock: + hash_free_result(sk, ctx); release_sock(sk); return err ?: len; From 06ba3b2133dc203e1e9bc36cee7f0839b79a9e8b Mon Sep 17 00:00:00 2001 From: Jeremy Linton Date: Thu, 17 Nov 2016 09:14:25 -0600 Subject: [PATCH 742/792] net: sky2: Fix shutdown crash The sky2 frequently crashes during machine shutdown with: sky2_get_stats+0x60/0x3d8 [sky2] dev_get_stats+0x68/0xd8 rtnl_fill_stats+0x54/0x140 rtnl_fill_ifinfo+0x46c/0xc68 rtmsg_ifinfo_build_skb+0x7c/0xf0 rtmsg_ifinfo.part.22+0x3c/0x70 rtmsg_ifinfo+0x50/0x5c netdev_state_change+0x4c/0x58 linkwatch_do_dev+0x50/0x88 __linkwatch_run_queue+0x104/0x1a4 linkwatch_event+0x30/0x3c process_one_work+0x140/0x3e0 worker_thread+0x60/0x44c kthread+0xdc/0xf0 ret_from_fork+0x10/0x50 This is caused by the sky2 being called after it has been shutdown. A previous thread about this can be found here: https://lkml.org/lkml/2016/4/12/410 An alternative fix is to assure that IFF_UP gets cleared by calling dev_close() during shutdown. This is similar to what the bnx2/tg3/xgene and maybe others are doing to assure that the driver isn't being called following _shutdown(). Signed-off-by: Jeremy Linton Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/sky2.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c index f05ea56dcff2..941c8e2c944e 100644 --- a/drivers/net/ethernet/marvell/sky2.c +++ b/drivers/net/ethernet/marvell/sky2.c @@ -5220,6 +5220,19 @@ static SIMPLE_DEV_PM_OPS(sky2_pm_ops, sky2_suspend, sky2_resume); static void sky2_shutdown(struct pci_dev *pdev) { + struct sky2_hw *hw = pci_get_drvdata(pdev); + int port; + + for (port = 0; port < hw->ports; port++) { + struct net_device *ndev = hw->dev[port]; + + rtnl_lock(); + if (netif_running(ndev)) { + dev_close(ndev); + netif_device_detach(ndev); + } + rtnl_unlock(); + } sky2_suspend(&pdev->dev); pci_wake_from_d3(pdev, device_may_wakeup(&pdev->dev)); pci_set_power_state(pdev, PCI_D3hot); From c46ab7e08c79be7400f6d59edbc6f26a91941c5a Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 17 Nov 2016 17:39:58 +0100 Subject: [PATCH 743/792] net: ethernet: ti: cpsw: fix bad register access in probe error path Make sure to keep the platform device runtime-resumed throughout probe to avoid accessing the CPSW registers in the error path (e.g. for deferred probe) with clocks disabled: Unhandled fault: external abort on non-linefetch (0x1008) at 0xd0872d08 ... [] (cpsw_ale_control_set) from [] (cpsw_ale_destroy+0x2c/0x44) [] (cpsw_ale_destroy) from [] (cpsw_probe+0xbd0/0x10c4) [] (cpsw_probe) from [] (platform_drv_probe+0x5c/0xc0) Fixes: df828598a755 ("netdev: driver: ethernet: Add TI CPSW driver") Signed-off-by: Johan Hovold Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/cpsw.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index c6cff3d2ff05..f60f8ab7c1e3 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -2641,13 +2641,12 @@ static int cpsw_probe(struct platform_device *pdev) goto clean_runtime_disable_ret; } cpsw->version = readl(&cpsw->regs->id_ver); - pm_runtime_put_sync(&pdev->dev); res = platform_get_resource(pdev, IORESOURCE_MEM, 1); cpsw->wr_regs = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(cpsw->wr_regs)) { ret = PTR_ERR(cpsw->wr_regs); - goto clean_runtime_disable_ret; + goto clean_pm_runtime_put_ret; } memset(&dma_params, 0, sizeof(dma_params)); @@ -2684,7 +2683,7 @@ static int cpsw_probe(struct platform_device *pdev) default: dev_err(priv->dev, "unknown version 0x%08x\n", cpsw->version); ret = -ENODEV; - goto clean_runtime_disable_ret; + goto clean_pm_runtime_put_ret; } for (i = 0; i < cpsw->data.slaves; i++) { struct cpsw_slave *slave = &cpsw->slaves[i]; @@ -2713,7 +2712,7 @@ static int cpsw_probe(struct platform_device *pdev) if (!cpsw->dma) { dev_err(priv->dev, "error initializing dma\n"); ret = -ENOMEM; - goto clean_runtime_disable_ret; + goto clean_pm_runtime_put_ret; } cpsw->txch[0] = cpdma_chan_create(cpsw->dma, 0, cpsw_tx_handler, 0); @@ -2815,12 +2814,16 @@ static int cpsw_probe(struct platform_device *pdev) } } + pm_runtime_put(&pdev->dev); + return 0; clean_ale_ret: cpsw_ale_destroy(cpsw->ale); clean_dma_ret: cpdma_ctlr_destroy(cpsw->dma); +clean_pm_runtime_put_ret: + pm_runtime_put_sync(&pdev->dev); clean_runtime_disable_ret: pm_runtime_disable(&pdev->dev); clean_ndev_ret: From 86e1d5adcef961eb383ce4eacbe0ef22f06e2045 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 17 Nov 2016 17:39:59 +0100 Subject: [PATCH 744/792] net: ethernet: ti: cpsw: fix mdio device reference leak Make sure to drop the reference taken by of_find_device_by_node() when looking up an mdio device from a phy_id property during probe. Fixes: 549985ee9c72 ("cpsw: simplify the setup of the register pointers") Signed-off-by: Johan Hovold Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/cpsw.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index f60f8ab7c1e3..84c5d214557e 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -2397,6 +2397,7 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data, } snprintf(slave_data->phy_id, sizeof(slave_data->phy_id), PHY_ID_FMT, mdio->name, phyid); + put_device(&mdio->dev); } else { dev_err(&pdev->dev, "No slave[%d] phy_id, phy-handle, or fixed-link property\n", From a4e32b0d0a26ba2f2ba1c65bd403d06ccc1df29c Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 17 Nov 2016 17:40:00 +0100 Subject: [PATCH 745/792] net: ethernet: ti: cpsw: fix deferred probe Make sure to deregister all child devices also on probe errors to avoid leaks and to fix probe deferral: cpsw 4a100000.ethernet: omap_device: omap_device_enable() called from invalid state 1 cpsw 4a100000.ethernet: use pm_runtime_put_sync_suspend() in driver? cpsw: probe of 4a100000.ethernet failed with error -22 Add generic helper to undo the effects of cpsw_probe_dt(), which will also be used in a follow-on patch to fix further leaks that have been introduced more recently. Note that the platform device is now runtime-resumed before registering any child devices in order to make sure that it is synchronously suspended after having deregistered the children in the error path. Fixes: 1fb19aa730e4 ("net: cpsw: Add parent<->child relation support between cpsw and mdio") Signed-off-by: Johan Hovold Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/cpsw.c | 41 ++++++++++++++++++++-------------- 1 file changed, 24 insertions(+), 17 deletions(-) diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 84c5d214557e..5d14abb06486 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -2441,6 +2441,11 @@ no_phy_slave: return 0; } +static void cpsw_remove_dt(struct platform_device *pdev) +{ + of_platform_depopulate(&pdev->dev); +} + static int cpsw_probe_dual_emac(struct cpsw_priv *priv) { struct cpsw_common *cpsw = priv->cpsw; @@ -2585,10 +2590,19 @@ static int cpsw_probe(struct platform_device *pdev) /* Select default pin state */ pinctrl_pm_select_default_state(&pdev->dev); + /* Need to enable clocks with runtime PM api to access module + * registers + */ + ret = pm_runtime_get_sync(&pdev->dev); + if (ret < 0) { + pm_runtime_put_noidle(&pdev->dev); + goto clean_runtime_disable_ret; + } + if (cpsw_probe_dt(&cpsw->data, pdev)) { dev_err(&pdev->dev, "cpsw: platform data missing\n"); ret = -ENODEV; - goto clean_runtime_disable_ret; + goto clean_dt_ret; } data = &cpsw->data; cpsw->rx_ch_num = 1; @@ -2609,7 +2623,7 @@ static int cpsw_probe(struct platform_device *pdev) GFP_KERNEL); if (!cpsw->slaves) { ret = -ENOMEM; - goto clean_runtime_disable_ret; + goto clean_dt_ret; } for (i = 0; i < data->slaves; i++) cpsw->slaves[i].slave_num = i; @@ -2621,7 +2635,7 @@ static int cpsw_probe(struct platform_device *pdev) if (IS_ERR(clk)) { dev_err(priv->dev, "fck is not found\n"); ret = -ENODEV; - goto clean_runtime_disable_ret; + goto clean_dt_ret; } cpsw->bus_freq_mhz = clk_get_rate(clk) / 1000000; @@ -2629,25 +2643,17 @@ static int cpsw_probe(struct platform_device *pdev) ss_regs = devm_ioremap_resource(&pdev->dev, ss_res); if (IS_ERR(ss_regs)) { ret = PTR_ERR(ss_regs); - goto clean_runtime_disable_ret; + goto clean_dt_ret; } cpsw->regs = ss_regs; - /* Need to enable clocks with runtime PM api to access module - * registers - */ - ret = pm_runtime_get_sync(&pdev->dev); - if (ret < 0) { - pm_runtime_put_noidle(&pdev->dev); - goto clean_runtime_disable_ret; - } cpsw->version = readl(&cpsw->regs->id_ver); res = platform_get_resource(pdev, IORESOURCE_MEM, 1); cpsw->wr_regs = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(cpsw->wr_regs)) { ret = PTR_ERR(cpsw->wr_regs); - goto clean_pm_runtime_put_ret; + goto clean_dt_ret; } memset(&dma_params, 0, sizeof(dma_params)); @@ -2684,7 +2690,7 @@ static int cpsw_probe(struct platform_device *pdev) default: dev_err(priv->dev, "unknown version 0x%08x\n", cpsw->version); ret = -ENODEV; - goto clean_pm_runtime_put_ret; + goto clean_dt_ret; } for (i = 0; i < cpsw->data.slaves; i++) { struct cpsw_slave *slave = &cpsw->slaves[i]; @@ -2713,7 +2719,7 @@ static int cpsw_probe(struct platform_device *pdev) if (!cpsw->dma) { dev_err(priv->dev, "error initializing dma\n"); ret = -ENOMEM; - goto clean_pm_runtime_put_ret; + goto clean_dt_ret; } cpsw->txch[0] = cpdma_chan_create(cpsw->dma, 0, cpsw_tx_handler, 0); @@ -2823,7 +2829,8 @@ clean_ale_ret: cpsw_ale_destroy(cpsw->ale); clean_dma_ret: cpdma_ctlr_destroy(cpsw->dma); -clean_pm_runtime_put_ret: +clean_dt_ret: + cpsw_remove_dt(pdev); pm_runtime_put_sync(&pdev->dev); clean_runtime_disable_ret: pm_runtime_disable(&pdev->dev); @@ -2850,7 +2857,7 @@ static int cpsw_remove(struct platform_device *pdev) cpsw_ale_destroy(cpsw->ale); cpdma_ctlr_destroy(cpsw->dma); - of_platform_depopulate(&pdev->dev); + cpsw_remove_dt(pdev); pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); if (cpsw->data.dual_emac) From 8cbcc466fd4abd38a14b9d9b76c63a2cb7006554 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 17 Nov 2016 17:40:01 +0100 Subject: [PATCH 746/792] net: ethernet: ti: cpsw: fix of_node and phydev leaks Make sure to drop references taken and deregister devices registered during probe on probe errors (including deferred probe) and driver unbind. Specifically, PHY of-node references were never released and fixed-link PHY devices were never deregistered. Fixes: 9e42f715264f ("drivers: net: cpsw: add phy-handle parsing") Fixes: 1f71e8c96fc6 ("drivers: net: cpsw: Add support for fixed-link PHY") Signed-off-by: Johan Hovold Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/cpsw.c | 35 ++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 5d14abb06486..c3b78bc4fe58 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -2443,6 +2443,41 @@ no_phy_slave: static void cpsw_remove_dt(struct platform_device *pdev) { + struct net_device *ndev = platform_get_drvdata(pdev); + struct cpsw_common *cpsw = ndev_to_cpsw(ndev); + struct cpsw_platform_data *data = &cpsw->data; + struct device_node *node = pdev->dev.of_node; + struct device_node *slave_node; + int i = 0; + + for_each_available_child_of_node(node, slave_node) { + struct cpsw_slave_data *slave_data = &data->slave_data[i]; + + if (strcmp(slave_node->name, "slave")) + continue; + + if (of_phy_is_fixed_link(slave_node)) { + struct phy_device *phydev; + + phydev = of_phy_find_device(slave_node); + if (phydev) { + fixed_phy_unregister(phydev); + /* Put references taken by + * of_phy_find_device() and + * of_phy_register_fixed_link(). + */ + phy_device_free(phydev); + phy_device_free(phydev); + } + } + + of_node_put(slave_data->phy_node); + + i++; + if (i == data->slaves) + break; + } + of_platform_depopulate(&pdev->dev); } From a7fe9d466f6a33558a38c7ca9d58bcc83512d577 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 17 Nov 2016 17:40:02 +0100 Subject: [PATCH 747/792] net: ethernet: ti: cpsw: fix secondary-emac probe error path Make sure to deregister the primary device in case the secondary emac fails to probe. kernel BUG at /home/johan/work/omicron/src/linux/net/core/dev.c:7743! ... [] (free_netdev) from [] (cpsw_probe+0x9cc/0xe50) [] (cpsw_probe) from [] (platform_drv_probe+0x5c/0xc0) Fixes: d9ba8f9e6298 ("driver: net: ethernet: cpsw: dual emac interface implementation") Signed-off-by: Johan Hovold Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/cpsw.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index c3b78bc4fe58..11b2daef3158 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -2852,7 +2852,7 @@ static int cpsw_probe(struct platform_device *pdev) ret = cpsw_probe_dual_emac(priv); if (ret) { cpsw_err(priv, probe, "error probe slave 2 emac interface\n"); - goto clean_ale_ret; + goto clean_unregister_netdev_ret; } } @@ -2860,6 +2860,8 @@ static int cpsw_probe(struct platform_device *pdev) return 0; +clean_unregister_netdev_ret: + unregister_netdev(ndev); clean_ale_ret: cpsw_ale_destroy(cpsw->ale); clean_dma_ret: From 3420ea88509f9d585b39f36e737022faf0286d9a Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 17 Nov 2016 17:40:03 +0100 Subject: [PATCH 748/792] net: ethernet: ti: cpsw: add missing sanity check Make sure to check for allocation failures before dereferencing a NULL-pointer during probe. Fixes: 649a1688c960 ("net: ethernet: ti: cpsw: create common struct to hold shared driver data") Signed-off-by: Johan Hovold Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/cpsw.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 11b2daef3158..1387299030e4 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -2588,6 +2588,9 @@ static int cpsw_probe(struct platform_device *pdev) int irq; cpsw = devm_kzalloc(&pdev->dev, sizeof(struct cpsw_common), GFP_KERNEL); + if (!cpsw) + return -ENOMEM; + cpsw->dev = &pdev->dev; ndev = alloc_etherdev_mq(sizeof(struct cpsw_priv), CPSW_MAX_QUEUES); From 23a09873221c02106cf767a86743a55873f0d05b Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 17 Nov 2016 17:40:04 +0100 Subject: [PATCH 749/792] net: ethernet: ti: cpsw: fix fixed-link phy probe deferral Make sure to propagate errors from of_phy_register_fixed_link() which can fail with -EPROBE_DEFER. Fixes: 1f71e8c96fc6 ("drivers: net: cpsw: Add support for fixed-link PHY") Signed-off-by: Johan Hovold Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/cpsw.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index 1387299030e4..58947aae31c7 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -2375,8 +2375,11 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data, * to the PHY is the Ethernet MAC DT node. */ ret = of_phy_register_fixed_link(slave_node); - if (ret) + if (ret) { + if (ret != -EPROBE_DEFER) + dev_err(&pdev->dev, "failed to register fixed-link phy: %d\n", ret); return ret; + } slave_data->phy_node = of_node_get(slave_node); } else if (parp) { u32 phyid; @@ -2637,11 +2640,10 @@ static int cpsw_probe(struct platform_device *pdev) goto clean_runtime_disable_ret; } - if (cpsw_probe_dt(&cpsw->data, pdev)) { - dev_err(&pdev->dev, "cpsw: platform data missing\n"); - ret = -ENODEV; + ret = cpsw_probe_dt(&cpsw->data, pdev); + if (ret) goto clean_dt_ret; - } + data = &cpsw->data; cpsw->rx_ch_num = 1; cpsw->tx_ch_num = 1; From 06a77b07e3b44aea2b3c0e64de420ea2cfdcbaa9 Mon Sep 17 00:00:00 2001 From: WANG Cong Date: Thu, 17 Nov 2016 15:55:26 -0800 Subject: [PATCH 750/792] af_unix: conditionally use freezable blocking calls in read Commit 2b15af6f95 ("af_unix: use freezable blocking calls in read") converts schedule_timeout() to its freezable version, it was probably correct at that time, but later, commit 2b514574f7e8 ("net: af_unix: implement splice for stream af_unix sockets") breaks the strong requirement for a freezable sleep, according to commit 0f9548ca1091: We shouldn't try_to_freeze if locks are held. Holding a lock can cause a deadlock if the lock is later acquired in the suspend or hibernate path (e.g. by dpm). Holding a lock can also cause a deadlock in the case of cgroup_freezer if a lock is held inside a frozen cgroup that is later acquired by a process outside that group. The pipe_lock is still held at that point. So use freezable version only for the recvmsg call path, avoid impact for Android. Fixes: 2b514574f7e8 ("net: af_unix: implement splice for stream af_unix sockets") Reported-by: Dmitry Vyukov Cc: Tejun Heo Cc: Colin Cross Cc: Rafael J. Wysocki Cc: Hannes Frederic Sowa Signed-off-by: Cong Wang Signed-off-by: David S. Miller --- net/unix/af_unix.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index 5d1c14a2f268..2358f2690ec5 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -2199,7 +2199,8 @@ out: * Sleep until more data has arrived. But check for races.. */ static long unix_stream_data_wait(struct sock *sk, long timeo, - struct sk_buff *last, unsigned int last_len) + struct sk_buff *last, unsigned int last_len, + bool freezable) { struct sk_buff *tail; DEFINE_WAIT(wait); @@ -2220,7 +2221,10 @@ static long unix_stream_data_wait(struct sock *sk, long timeo, sk_set_bit(SOCKWQ_ASYNC_WAITDATA, sk); unix_state_unlock(sk); - timeo = freezable_schedule_timeout(timeo); + if (freezable) + timeo = freezable_schedule_timeout(timeo); + else + timeo = schedule_timeout(timeo); unix_state_lock(sk); if (sock_flag(sk, SOCK_DEAD)) @@ -2250,7 +2254,8 @@ struct unix_stream_read_state { unsigned int splice_flags; }; -static int unix_stream_read_generic(struct unix_stream_read_state *state) +static int unix_stream_read_generic(struct unix_stream_read_state *state, + bool freezable) { struct scm_cookie scm; struct socket *sock = state->socket; @@ -2330,7 +2335,7 @@ again: mutex_unlock(&u->iolock); timeo = unix_stream_data_wait(sk, timeo, last, - last_len); + last_len, freezable); if (signal_pending(current)) { err = sock_intr_errno(timeo); @@ -2472,7 +2477,7 @@ static int unix_stream_recvmsg(struct socket *sock, struct msghdr *msg, .flags = flags }; - return unix_stream_read_generic(&state); + return unix_stream_read_generic(&state, true); } static int unix_stream_splice_actor(struct sk_buff *skb, @@ -2503,7 +2508,7 @@ static ssize_t unix_stream_splice_read(struct socket *sock, loff_t *ppos, flags & SPLICE_F_NONBLOCK) state.flags = MSG_DONTWAIT; - return unix_stream_read_generic(&state); + return unix_stream_read_generic(&state, false); } static int unix_shutdown(struct socket *sock, int mode) From 0f5258cd91e9d78a1ee30696314bec3c33321a93 Mon Sep 17 00:00:00 2001 From: Stefan Hajnoczi Date: Fri, 18 Nov 2016 09:41:46 +0000 Subject: [PATCH 751/792] netns: fix get_net_ns_by_fd(int pid) typo The argument to get_net_ns_by_fd() is a /proc/$PID/ns/net file descriptor not a pid. Fix the typo. Signed-off-by: Stefan Hajnoczi Acked-by: Rami Rosen Signed-off-by: David S. Miller --- include/net/net_namespace.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/net/net_namespace.h b/include/net/net_namespace.h index fc4f757107df..0940598c002f 100644 --- a/include/net/net_namespace.h +++ b/include/net/net_namespace.h @@ -170,7 +170,7 @@ static inline struct net *copy_net_ns(unsigned long flags, extern struct list_head net_namespace_list; struct net *get_net_ns_by_pid(pid_t pid); -struct net *get_net_ns_by_fd(int pid); +struct net *get_net_ns_by_fd(int fd); #ifdef CONFIG_SYSCTL void ipx_register_sysctl(void); From f82ef3e10a870acc19fa04f80ef5877eaa26f41e Mon Sep 17 00:00:00 2001 From: Sabrina Dubroca Date: Fri, 18 Nov 2016 15:50:39 +0100 Subject: [PATCH 752/792] rtnetlink: fix FDB size computation Add missing NDA_VLAN attribute's size. Fixes: 1e53d5bb8878 ("net: Pass VLAN ID to rtnl_fdb_notify.") Signed-off-by: Sabrina Dubroca Signed-off-by: David S. Miller --- net/core/rtnetlink.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c index a6529c55ffb7..2b9d7d08ed4d 100644 --- a/net/core/rtnetlink.c +++ b/net/core/rtnetlink.c @@ -2852,7 +2852,10 @@ nla_put_failure: static inline size_t rtnl_fdb_nlmsg_size(void) { - return NLMSG_ALIGN(sizeof(struct ndmsg)) + nla_total_size(ETH_ALEN); + return NLMSG_ALIGN(sizeof(struct ndmsg)) + + nla_total_size(ETH_ALEN) + /* NDA_LLADDR */ + nla_total_size(sizeof(u16)) + /* NDA_VLAN */ + 0; } static void rtnl_fdb_notify(struct net_device *dev, u8 *addr, u16 vid, int type, From c88c545bf3202ca2cdb45df93eb40e3bcdbb3742 Mon Sep 17 00:00:00 2001 From: Dave Kleikamp Date: Fri, 28 Oct 2016 10:12:40 -0700 Subject: [PATCH 753/792] sparc64: Add FORCE_MAX_ZONEORDER and default to 13 This change allows ATU (new IOMMU) in SPARC systems to request large (32M) contiguous memory during boot for creating IOTSB backing store. Signed-off-by: Dave Kleikamp Signed-off-by: Tushar Dave Signed-off-by: David S. Miller --- arch/sparc/Kconfig | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index b23c76b42d6e..5202eb4ba2db 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -89,6 +89,10 @@ config ARCH_DEFCONFIG config ARCH_PROC_KCORE_TEXT def_bool y +config ARCH_ATU + bool + default y if SPARC64 + config IOMMU_HELPER bool default y if SPARC64 @@ -304,6 +308,20 @@ config ARCH_SPARSEMEM_ENABLE config ARCH_SPARSEMEM_DEFAULT def_bool y if SPARC64 +config FORCE_MAX_ZONEORDER + int "Maximum zone order" + default "13" + help + The kernel memory allocator divides physically contiguous memory + blocks into "zones", where each zone is a power of two number of + pages. This option selects the largest power of two that the kernel + keeps in the memory allocator. If you need to allocate very large + blocks of physically contiguous memory, then you may need to + increase this value. + + This config option is actually maximum order plus one. For example, + a value of 13 means that the largest free memory block is 2^12 pages. + source "mm/Kconfig" if SPARC64 From f0248c1524fae654e9746e6843b9657fb3917387 Mon Sep 17 00:00:00 2001 From: Tushar Dave Date: Fri, 28 Oct 2016 10:12:41 -0700 Subject: [PATCH 754/792] sparc64: Add ATU (new IOMMU) support ATU (Address Translation Unit) is a new IOMMU in SPARC supported with Hypervisor IOMMU v2 APIs. Current SPARC IOMMU supports only 32bit address ranges and one TSB per PCIe root complex that has a 2GB per root complex DVMA space limit. The limit has become a scalability bottleneck nowadays that a typical 10G/40G NIC can consume 300MB-500MB DVMA space per instance. When DVMA resource is exhausted, devices will not be usable since the driver can't allocate DVMA. ATU removes bottleneck by allowing guest os to create IOTSB of size 32G (or more) with 64bit address ranges available in ATU HW. 32G is more than enough DVMA space to be shared by all PCIe devices under root complex contrast to 2G space provided by legacy IOMMU. ATU allows PCIe devices to use 64bit DMA addressing. Devices which choose to use 32bit DMA mask will continue to work with the existing legacy IOMMU. Signed-off-by: Tushar Dave Reviewed-by: chris hyser Acked-by: Sowmini Varadhan Signed-off-by: David S. Miller --- arch/sparc/include/asm/hypervisor.h | 337 ++++++++++++++++++++++++++++ arch/sparc/include/asm/iommu_64.h | 26 +++ arch/sparc/kernel/hvapi.c | 1 + arch/sparc/kernel/pci_sun4v.c | 140 ++++++++++++ arch/sparc/kernel/pci_sun4v.h | 7 + arch/sparc/kernel/pci_sun4v_asm.S | 18 ++ 6 files changed, 529 insertions(+) diff --git a/arch/sparc/include/asm/hypervisor.h b/arch/sparc/include/asm/hypervisor.h index 666d5ba230d2..7b15df8be008 100644 --- a/arch/sparc/include/asm/hypervisor.h +++ b/arch/sparc/include/asm/hypervisor.h @@ -2335,6 +2335,342 @@ unsigned long sun4v_vintr_set_target(unsigned long dev_handle, */ #define HV_FAST_PCI_MSG_SETVALID 0xd3 +/* PCI IOMMU v2 definitions and services + * + * While the PCI IO definitions above is valid IOMMU v2 adds new PCI IO + * definitions and services. + * + * CTE Clump Table Entry. First level table entry in the ATU. + * + * pci_device_list + * A 32-bit aligned list of pci_devices. + * + * pci_device_listp + * real address of a pci_device_list. 32-bit aligned. + * + * iotte IOMMU translation table entry. + * + * iotte_attributes + * IO Attributes for IOMMU v2 mappings. In addition to + * read, write IOMMU v2 supports relax ordering + * + * io_page_list A 64-bit aligned list of real addresses. Each real + * address in an io_page_list must be properly aligned + * to the pagesize of the given IOTSB. + * + * io_page_list_p Real address of an io_page_list, 64-bit aligned. + * + * IOTSB IO Translation Storage Buffer. An aligned table of + * IOTTEs. Each IOTSB has a pagesize, table size, and + * virtual address associated with it that must match + * a pagesize and table size supported by the un-derlying + * hardware implementation. The alignment requirements + * for an IOTSB depend on the pagesize used for that IOTSB. + * Each IOTTE in an IOTSB maps one pagesize-sized page. + * The size of the IOTSB dictates how large of a virtual + * address space the IOTSB is capable of mapping. + * + * iotsb_handle An opaque identifier for an IOTSB. A devhandle plus + * iotsb_handle represents a binding of an IOTSB to a + * PCI root complex. + * + * iotsb_index Zero-based IOTTE number within an IOTSB. + */ + +/* pci_iotsb_conf() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_IOTSB_CONF + * ARG0: devhandle + * ARG1: r_addr + * ARG2: size + * ARG3: pagesize + * ARG4: iova + * RET0: status + * RET1: iotsb_handle + * ERRORS: EINVAL Invalid devhandle, size, iova, or pagesize + * EBADALIGN r_addr is not properly aligned + * ENORADDR r_addr is not a valid real address + * ETOOMANY No further IOTSBs may be configured + * EBUSY Duplicate devhandle, raddir, iova combination + * + * Create an IOTSB suitable for the PCI root complex identified by devhandle, + * for the DMA virtual address defined by the argument iova. + * + * r_addr is the properly aligned base address of the IOTSB and size is the + * IOTSB (table) size in bytes.The IOTSB is required to be zeroed prior to + * being configured. If it contains any values other than zeros then the + * behavior is undefined. + * + * pagesize is the size of each page in the IOTSB. Note that the combination of + * size (table size) and pagesize must be valid. + * + * virt is the DMA virtual address this IOTSB will map. + * + * If successful, the opaque 64-bit handle iotsb_handle is returned in ret1. + * Once configured, privileged access to the IOTSB memory is prohibited and + * creates undefined behavior. The only permitted access is indirect via these + * services. + */ +#define HV_FAST_PCI_IOTSB_CONF 0x190 + +/* pci_iotsb_info() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_IOTSB_INFO + * ARG0: devhandle + * ARG1: iotsb_handle + * RET0: status + * RET1: r_addr + * RET2: size + * RET3: pagesize + * RET4: iova + * RET5: #bound + * ERRORS: EINVAL Invalid devhandle or iotsb_handle + * + * This service returns configuration information about an IOTSB previously + * created with pci_iotsb_conf. + * + * iotsb_handle value 0 may be used with this service to inquire about the + * legacy IOTSB that may or may not exist. If the service succeeds, the return + * values describe the legacy IOTSB and I/O virtual addresses mapped by that + * table. However, the table base address r_addr may contain the value -1 which + * indicates a memory range that cannot be accessed or be reclaimed. + * + * The return value #bound contains the number of PCI devices that iotsb_handle + * is currently bound to. + */ +#define HV_FAST_PCI_IOTSB_INFO 0x191 + +/* pci_iotsb_unconf() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_IOTSB_UNCONF + * ARG0: devhandle + * ARG1: iotsb_handle + * RET0: status + * ERRORS: EINVAL Invalid devhandle or iotsb_handle + * EBUSY The IOTSB is bound and may not be unconfigured + * + * This service unconfigures the IOTSB identified by the devhandle and + * iotsb_handle arguments, previously created with pci_iotsb_conf. + * The IOTSB must not be currently bound to any device or the service will fail + * + * If the call succeeds, iotsb_handle is no longer valid. + */ +#define HV_FAST_PCI_IOTSB_UNCONF 0x192 + +/* pci_iotsb_bind() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_IOTSB_BIND + * ARG0: devhandle + * ARG1: iotsb_handle + * ARG2: pci_device + * RET0: status + * ERRORS: EINVAL Invalid devhandle, iotsb_handle, or pci_device + * EBUSY A PCI function is already bound to an IOTSB at the same + * address range as specified by devhandle, iotsb_handle. + * + * This service binds the PCI function specified by the argument pci_device to + * the IOTSB specified by the arguments devhandle and iotsb_handle. + * + * The PCI device function is bound to the specified IOTSB with the IOVA range + * specified when the IOTSB was configured via pci_iotsb_conf. If the function + * is already bound then it is unbound first. + */ +#define HV_FAST_PCI_IOTSB_BIND 0x193 + +/* pci_iotsb_unbind() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_IOTSB_UNBIND + * ARG0: devhandle + * ARG1: iotsb_handle + * ARG2: pci_device + * RET0: status + * ERRORS: EINVAL Invalid devhandle, iotsb_handle, or pci_device + * ENOMAP The PCI function was not bound to the specified IOTSB + * + * This service unbinds the PCI device specified by the argument pci_device + * from the IOTSB identified * by the arguments devhandle and iotsb_handle. + * + * If the PCI device is not bound to the specified IOTSB then this service will + * fail with status ENOMAP + */ +#define HV_FAST_PCI_IOTSB_UNBIND 0x194 + +/* pci_iotsb_get_binding() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_IOTSB_GET_BINDING + * ARG0: devhandle + * ARG1: iotsb_handle + * ARG2: iova + * RET0: status + * RET1: iotsb_handle + * ERRORS: EINVAL Invalid devhandle, pci_device, or iova + * ENOMAP The PCI function is not bound to an IOTSB at iova + * + * This service returns the IOTSB binding, iotsb_handle, for a given pci_device + * and DMA virtual address, iova. + * + * iova must be the base address of a DMA virtual address range as defined by + * the iommu-address-ranges property in the root complex device node defined + * by the argument devhandle. + */ +#define HV_FAST_PCI_IOTSB_GET_BINDING 0x195 + +/* pci_iotsb_map() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_IOTSB_MAP + * ARG0: devhandle + * ARG1: iotsb_handle + * ARG2: index_count + * ARG3: iotte_attributes + * ARG4: io_page_list_p + * RET0: status + * RET1: #mapped + * ERRORS: EINVAL Invalid devhandle, iotsb_handle, #iottes, + * iotsb_index or iotte_attributes + * EBADALIGN Improperly aligned io_page_list_p or I/O page + * address in the I/O page list. + * ENORADDR Invalid io_page_list_p or I/O page address in + * the I/O page list. + * + * This service creates and flushes mappings in the IOTSB defined by the + * arguments devhandle, iotsb. + * + * The index_count argument consists of two fields. Bits 63:48 contain #iotte + * and bits 47:0 contain iotsb_index + * + * The first mapping is created in the IOTSB index specified by iotsb_index. + * Subsequent mappings are created at iotsb_index+1 and so on. + * + * The attributes of each mapping are defined by the argument iotte_attributes. + * + * The io_page_list_p specifies the real address of the 64-bit-aligned list of + * #iottes I/O page addresses. Each page address must be a properly aligned + * real address of a page to be mapped in the IOTSB. The first entry in the I/O + * page list contains the real address of the first page, the 2nd entry for the + * 2nd page, and so on. + * + * #iottes must be greater than zero. + * + * The return value #mapped is the actual number of mappings created, which may + * be less than or equal to the argument #iottes. If the function returns + * successfully with a #mapped value less than the requested #iottes then the + * caller should continue to invoke the service with updated iotsb_index, + * #iottes, and io_page_list_p arguments until all pages are mapped. + * + * This service must not be used to demap a mapping. In other words, all + * mappings must be valid and have one or both of the RW attribute bits set. + * + * Note: + * It is implementation-defined whether I/O page real address validity checking + * is done at time mappings are established or deferred until they are + * accessed. + */ +#define HV_FAST_PCI_IOTSB_MAP 0x196 + +/* pci_iotsb_map_one() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_IOTSB_MAP_ONE + * ARG0: devhandle + * ARG1: iotsb_handle + * ARG2: iotsb_index + * ARG3: iotte_attributes + * ARG4: r_addr + * RET0: status + * ERRORS: EINVAL Invalid devhandle,iotsb_handle, iotsb_index + * or iotte_attributes + * EBADALIGN Improperly aligned r_addr + * ENORADDR Invalid r_addr + * + * This service creates and flushes a single mapping in the IOTSB defined by the + * arguments devhandle, iotsb. + * + * The mapping for the page at r_addr is created at the IOTSB index specified by + * iotsb_index with the attributes iotte_attributes. + * + * This service must not be used to demap a mapping. In other words, the mapping + * must be valid and have one or both of the RW attribute bits set. + * + * Note: + * It is implementation-defined whether I/O page real address validity checking + * is done at time mappings are established or deferred until they are + * accessed. + */ +#define HV_FAST_PCI_IOTSB_MAP_ONE 0x197 + +/* pci_iotsb_demap() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_IOTSB_DEMAP + * ARG0: devhandle + * ARG1: iotsb_handle + * ARG2: iotsb_index + * ARG3: #iottes + * RET0: status + * RET1: #unmapped + * ERRORS: EINVAL Invalid devhandle, iotsb_handle, iotsb_index or #iottes + * + * This service unmaps and flushes up to #iottes mappings starting at index + * iotsb_index from the IOTSB defined by the arguments devhandle, iotsb. + * + * #iottes must be greater than zero. + * + * The actual number of IOTTEs unmapped is returned in #unmapped and may be less + * than or equal to the requested number of IOTTEs, #iottes. + * + * If #unmapped is less than #iottes, the caller should continue to invoke this + * service with updated iotsb_index and #iottes arguments until all pages are + * demapped. + */ +#define HV_FAST_PCI_IOTSB_DEMAP 0x198 + +/* pci_iotsb_getmap() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_IOTSB_GETMAP + * ARG0: devhandle + * ARG1: iotsb_handle + * ARG2: iotsb_index + * RET0: status + * RET1: r_addr + * RET2: iotte_attributes + * ERRORS: EINVAL Invalid devhandle, iotsb_handle, or iotsb_index + * ENOMAP No mapping was found + * + * This service returns the mapping specified by index iotsb_index from the + * IOTSB defined by the arguments devhandle, iotsb. + * + * Upon success, the real address of the mapping shall be returned in + * r_addr and thethe IOTTE mapping attributes shall be returned in + * iotte_attributes. + * + * The return value iotte_attributes may not include optional features used in + * the call to create the mapping. + */ +#define HV_FAST_PCI_IOTSB_GETMAP 0x199 + +/* pci_iotsb_sync_mappings() + * TRAP: HV_FAST_TRAP + * FUNCTION: HV_FAST_PCI_IOTSB_SYNC_MAPPINGS + * ARG0: devhandle + * ARG1: iotsb_handle + * ARG2: iotsb_index + * ARG3: #iottes + * RET0: status + * RET1: #synced + * ERROS: EINVAL Invalid devhandle, iotsb_handle, iotsb_index, or #iottes + * + * This service synchronizes #iottes mappings starting at index iotsb_index in + * the IOTSB defined by the arguments devhandle, iotsb. + * + * #iottes must be greater than zero. + * + * The actual number of IOTTEs synchronized is returned in #synced, which may + * be less than or equal to the requested number, #iottes. + * + * Upon a successful return, #synced is less than #iottes, the caller should + * continue to invoke this service with updated iotsb_index and #iottes + * arguments until all pages are synchronized. + */ +#define HV_FAST_PCI_IOTSB_SYNC_MAPPINGS 0x19a + /* Logical Domain Channel services. */ #define LDC_CHANNEL_DOWN 0 @@ -2993,6 +3329,7 @@ unsigned long sun4v_m7_set_perfreg(unsigned long reg_num, #define HV_GRP_SDIO 0x0108 #define HV_GRP_SDIO_ERR 0x0109 #define HV_GRP_REBOOT_DATA 0x0110 +#define HV_GRP_ATU 0x0111 #define HV_GRP_M7_PERF 0x0114 #define HV_GRP_NIAG_PERF 0x0200 #define HV_GRP_FIRE_PERF 0x0201 diff --git a/arch/sparc/include/asm/iommu_64.h b/arch/sparc/include/asm/iommu_64.h index cd0d69fa7592..93daa5965b3d 100644 --- a/arch/sparc/include/asm/iommu_64.h +++ b/arch/sparc/include/asm/iommu_64.h @@ -24,8 +24,34 @@ struct iommu_arena { unsigned int limit; }; +#define ATU_64_SPACE_SIZE 0x800000000 /* 32G */ + +/* Data structures for SPARC ATU architecture */ +struct atu_iotsb { + void *table; /* IOTSB table base virtual addr*/ + u64 ra; /* IOTSB table real addr */ + u64 dvma_size; /* ranges[3].size or OS slected 32G size */ + u64 dvma_base; /* ranges[3].base */ + u64 table_size; /* IOTSB table size */ + u64 page_size; /* IO PAGE size for IOTSB */ + u32 iotsb_num; /* tsbnum is same as iotsb_handle */ +}; + +struct atu_ranges { + u64 base; + u64 size; +}; + +struct atu { + struct atu_ranges *ranges; + struct atu_iotsb *iotsb; + u64 base; + u64 size; +}; + struct iommu { struct iommu_map_table tbl; + struct atu *atu; spinlock_t lock; u32 dma_addr_mask; iopte_t *page_table; diff --git a/arch/sparc/kernel/hvapi.c b/arch/sparc/kernel/hvapi.c index 662500fa555f..267731234ce8 100644 --- a/arch/sparc/kernel/hvapi.c +++ b/arch/sparc/kernel/hvapi.c @@ -39,6 +39,7 @@ static struct api_info api_table[] = { { .group = HV_GRP_SDIO, }, { .group = HV_GRP_SDIO_ERR, }, { .group = HV_GRP_REBOOT_DATA, }, + { .group = HV_GRP_ATU, .flags = FLAG_PRE_API }, { .group = HV_GRP_NIAG_PERF, .flags = FLAG_PRE_API }, { .group = HV_GRP_FIRE_PERF, }, { .group = HV_GRP_N2_CPU, }, diff --git a/arch/sparc/kernel/pci_sun4v.c b/arch/sparc/kernel/pci_sun4v.c index db57d8acdc01..2afb86c73da9 100644 --- a/arch/sparc/kernel/pci_sun4v.c +++ b/arch/sparc/kernel/pci_sun4v.c @@ -44,6 +44,9 @@ static struct vpci_version vpci_versions[] = { { .major = 1, .minor = 1 }, }; +static unsigned long vatu_major = 1; +static unsigned long vatu_minor = 1; + #define PGLIST_NENTS (PAGE_SIZE / sizeof(u64)) struct iommu_batch { @@ -581,6 +584,107 @@ static unsigned long probe_existing_entries(struct pci_pbm_info *pbm, return cnt; } +static int pci_sun4v_atu_alloc_iotsb(struct pci_pbm_info *pbm) +{ + struct atu *atu = pbm->iommu->atu; + struct atu_iotsb *iotsb; + void *table; + u64 table_size; + u64 iotsb_num; + unsigned long order; + unsigned long err; + + iotsb = kzalloc(sizeof(*iotsb), GFP_KERNEL); + if (!iotsb) { + err = -ENOMEM; + goto out_err; + } + atu->iotsb = iotsb; + + /* calculate size of IOTSB */ + table_size = (atu->size / IO_PAGE_SIZE) * 8; + order = get_order(table_size); + table = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, order); + if (!table) { + err = -ENOMEM; + goto table_failed; + } + iotsb->table = table; + iotsb->ra = __pa(table); + iotsb->dvma_size = atu->size; + iotsb->dvma_base = atu->base; + iotsb->table_size = table_size; + iotsb->page_size = IO_PAGE_SIZE; + + /* configure and register IOTSB with HV */ + err = pci_sun4v_iotsb_conf(pbm->devhandle, + iotsb->ra, + iotsb->table_size, + iotsb->page_size, + iotsb->dvma_base, + &iotsb_num); + if (err) { + pr_err(PFX "pci_iotsb_conf failed error: %ld\n", err); + goto iotsb_conf_failed; + } + iotsb->iotsb_num = iotsb_num; + + return 0; + +iotsb_conf_failed: + free_pages((unsigned long)table, order); +table_failed: + kfree(iotsb); +out_err: + return err; +} + +static int pci_sun4v_atu_init(struct pci_pbm_info *pbm) +{ + struct atu *atu = pbm->iommu->atu; + unsigned long err; + const u64 *ranges; + const u32 *page_size; + int len; + + ranges = of_get_property(pbm->op->dev.of_node, "iommu-address-ranges", + &len); + if (!ranges) { + pr_err(PFX "No iommu-address-ranges\n"); + return -EINVAL; + } + + page_size = of_get_property(pbm->op->dev.of_node, "iommu-pagesizes", + NULL); + if (!page_size) { + pr_err(PFX "No iommu-pagesizes\n"); + return -EINVAL; + } + + /* There are 4 iommu-address-ranges supported. Each range is pair of + * {base, size}. The ranges[0] and ranges[1] are 32bit address space + * while ranges[2] and ranges[3] are 64bit space. We want to use 64bit + * address ranges to support 64bit addressing. Because 'size' for + * address ranges[2] and ranges[3] are same we can select either of + * ranges[2] or ranges[3] for mapping. However due to 'size' is too + * large for OS to allocate IOTSB we are using fix size 32G + * (ATU_64_SPACE_SIZE) which is more than enough for all PCIe devices + * to share. + */ + atu->ranges = (struct atu_ranges *)ranges; + atu->base = atu->ranges[3].base; + atu->size = ATU_64_SPACE_SIZE; + + /* Create IOTSB */ + err = pci_sun4v_atu_alloc_iotsb(pbm); + if (err) { + pr_err(PFX "Error creating ATU IOTSB\n"); + return err; + } + + return 0; +} + static int pci_sun4v_iommu_init(struct pci_pbm_info *pbm) { static const u32 vdma_default[] = { 0x80000000, 0x80000000 }; @@ -918,6 +1022,18 @@ static int pci_sun4v_pbm_init(struct pci_pbm_info *pbm, pci_sun4v_scan_bus(pbm, &op->dev); + /* if atu_init fails its not complete failure. + * we can still continue using legacy iommu. + */ + if (pbm->iommu->atu) { + err = pci_sun4v_atu_init(pbm); + if (err) { + kfree(pbm->iommu->atu); + pbm->iommu->atu = NULL; + pr_err(PFX "ATU init failed, err=%d\n", err); + } + } + pbm->next = pci_pbm_root; pci_pbm_root = pbm; @@ -931,8 +1047,10 @@ static int pci_sun4v_probe(struct platform_device *op) struct pci_pbm_info *pbm; struct device_node *dp; struct iommu *iommu; + struct atu *atu; u32 devhandle; int i, err = -ENODEV; + static bool hv_atu = true; dp = op->dev.of_node; @@ -954,6 +1072,19 @@ static int pci_sun4v_probe(struct platform_device *op) pr_info(PFX "Registered hvapi major[%lu] minor[%lu]\n", vpci_major, vpci_minor); + err = sun4v_hvapi_register(HV_GRP_ATU, vatu_major, &vatu_minor); + if (err) { + /* don't return an error if we fail to register the + * ATU group, but ATU hcalls won't be available. + */ + hv_atu = false; + pr_err(PFX "Could not register hvapi ATU err=%d\n", + err); + } else { + pr_info(PFX "Registered hvapi ATU major[%lu] minor[%lu]\n", + vatu_major, vatu_minor); + } + dma_ops = &sun4v_dma_ops; } @@ -991,6 +1122,14 @@ static int pci_sun4v_probe(struct platform_device *op) } pbm->iommu = iommu; + iommu->atu = NULL; + if (hv_atu) { + atu = kzalloc(sizeof(*atu), GFP_KERNEL); + if (!atu) + pr_err(PFX "Could not allocate atu\n"); + else + iommu->atu = atu; + } err = pci_sun4v_pbm_init(pbm, op, devhandle); if (err) @@ -1001,6 +1140,7 @@ static int pci_sun4v_probe(struct platform_device *op) return 0; out_free_iommu: + kfree(iommu->atu); kfree(pbm->iommu); out_free_controller: diff --git a/arch/sparc/kernel/pci_sun4v.h b/arch/sparc/kernel/pci_sun4v.h index 5642212390b2..0ef6d1c456e7 100644 --- a/arch/sparc/kernel/pci_sun4v.h +++ b/arch/sparc/kernel/pci_sun4v.h @@ -89,4 +89,11 @@ unsigned long pci_sun4v_msg_setvalid(unsigned long devhandle, unsigned long msinum, unsigned long valid); +/* Sun4v HV IOMMU v2 APIs */ +unsigned long pci_sun4v_iotsb_conf(unsigned long devhandle, + unsigned long ra, + unsigned long table_size, + unsigned long page_size, + unsigned long dvma_base, + u64 *iotsb_num); #endif /* !(_PCI_SUN4V_H) */ diff --git a/arch/sparc/kernel/pci_sun4v_asm.S b/arch/sparc/kernel/pci_sun4v_asm.S index e606d46c6815..fd94d0e4a41d 100644 --- a/arch/sparc/kernel/pci_sun4v_asm.S +++ b/arch/sparc/kernel/pci_sun4v_asm.S @@ -360,3 +360,21 @@ ENTRY(pci_sun4v_msg_setvalid) mov %o0, %o0 ENDPROC(pci_sun4v_msg_setvalid) + /* + * %o0: devhandle + * %o1: r_addr + * %o2: size + * %o3: pagesize + * %o4: virt + * %o5: &iotsb_num/&iotsb_handle + * + * returns %o0: status + * %o1: iotsb_num/iotsb_handle + */ +ENTRY(pci_sun4v_iotsb_conf) + mov %o5, %g1 + mov HV_FAST_PCI_IOTSB_CONF, %o5 + ta HV_FAST_TRAP + retl + stx %o1, [%g1] +ENDPROC(pci_sun4v_iotsb_conf) From 31f077dc7dffd4a444932a9fe7fe84d9c7b90b73 Mon Sep 17 00:00:00 2001 From: Tushar Dave Date: Fri, 28 Oct 2016 10:12:42 -0700 Subject: [PATCH 755/792] sparc64: Initialize iommu_map_table and iommu_pool Like legacy IOMMU, use common iommu_map_table and iommu_pool for ATU. This change initializes iommu_map_table and iommu_pool for ATU. Signed-off-by: Tushar Dave Reviewed-by: chris hyser Reviewed-by: Sowmini Varadhan Signed-off-by: David S. Miller --- arch/sparc/include/asm/iommu_64.h | 2 ++ arch/sparc/kernel/pci_sun4v.c | 19 +++++++++++++++++++ 2 files changed, 21 insertions(+) diff --git a/arch/sparc/include/asm/iommu_64.h b/arch/sparc/include/asm/iommu_64.h index 93daa5965b3d..f24f356f2503 100644 --- a/arch/sparc/include/asm/iommu_64.h +++ b/arch/sparc/include/asm/iommu_64.h @@ -45,8 +45,10 @@ struct atu_ranges { struct atu { struct atu_ranges *ranges; struct atu_iotsb *iotsb; + struct iommu_map_table tbl; u64 base; u64 size; + u64 dma_addr_mask; }; struct iommu { diff --git a/arch/sparc/kernel/pci_sun4v.c b/arch/sparc/kernel/pci_sun4v.c index 2afb86c73da9..242477cbfdf2 100644 --- a/arch/sparc/kernel/pci_sun4v.c +++ b/arch/sparc/kernel/pci_sun4v.c @@ -644,6 +644,8 @@ static int pci_sun4v_atu_init(struct pci_pbm_info *pbm) struct atu *atu = pbm->iommu->atu; unsigned long err; const u64 *ranges; + u64 map_size, num_iotte; + u64 dma_mask; const u32 *page_size; int len; @@ -682,6 +684,23 @@ static int pci_sun4v_atu_init(struct pci_pbm_info *pbm) return err; } + /* Create ATU iommu map. + * One bit represents one iotte in IOTSB table. + */ + dma_mask = (roundup_pow_of_two(atu->size) - 1UL); + num_iotte = atu->size / IO_PAGE_SIZE; + map_size = num_iotte / 8; + atu->tbl.table_map_base = atu->base; + atu->dma_addr_mask = dma_mask; + atu->tbl.map = kzalloc(map_size, GFP_KERNEL); + if (!atu->tbl.map) + return -ENOMEM; + + iommu_tbl_pool_init(&atu->tbl, num_iotte, IO_PAGE_SHIFT, + NULL, false /* no large_pool */, + 0 /* default npools */, + false /* want span boundary checking */); + return 0; } From 5116ab4eabed575b7cca61a6e89b7d6fb7440970 Mon Sep 17 00:00:00 2001 From: Tushar Dave Date: Fri, 28 Oct 2016 10:12:43 -0700 Subject: [PATCH 756/792] sparc64: Bind PCIe devices to use IOMMU v2 service In order to use Hypervisor (HV) IOMMU v2 API for map/demap, each PCIe device has to be bound to IOTSB using HV API pci_iotsb_bind(). Signed-off-by: Tushar Dave Reviewed-by: chris hyser Acked-by: Sowmini Varadhan Signed-off-by: David S. Miller --- arch/sparc/kernel/pci_sun4v.c | 43 +++++++++++++++++++++++++++++++ arch/sparc/kernel/pci_sun4v.h | 3 +++ arch/sparc/kernel/pci_sun4v_asm.S | 14 ++++++++++ 3 files changed, 60 insertions(+) diff --git a/arch/sparc/kernel/pci_sun4v.c b/arch/sparc/kernel/pci_sun4v.c index 242477cbfdf2..d4208aa93383 100644 --- a/arch/sparc/kernel/pci_sun4v.c +++ b/arch/sparc/kernel/pci_sun4v.c @@ -216,6 +216,43 @@ range_alloc_fail: return NULL; } +unsigned long dma_4v_iotsb_bind(unsigned long devhandle, + unsigned long iotsb_num, + struct pci_bus *bus_dev) +{ + struct pci_dev *pdev; + unsigned long err; + unsigned int bus; + unsigned int device; + unsigned int fun; + + list_for_each_entry(pdev, &bus_dev->devices, bus_list) { + if (pdev->subordinate) { + /* No need to bind pci bridge */ + dma_4v_iotsb_bind(devhandle, iotsb_num, + pdev->subordinate); + } else { + bus = bus_dev->number; + device = PCI_SLOT(pdev->devfn); + fun = PCI_FUNC(pdev->devfn); + err = pci_sun4v_iotsb_bind(devhandle, iotsb_num, + HV_PCI_DEVICE_BUILD(bus, + device, + fun)); + + /* If bind fails for one device it is going to fail + * for rest of the devices because we are sharing + * IOTSB. So in case of failure simply return with + * error. + */ + if (err) + return err; + } + } + + return 0; +} + static void dma_4v_iommu_demap(void *demap_arg, unsigned long entry, unsigned long npages) { @@ -629,6 +666,12 @@ static int pci_sun4v_atu_alloc_iotsb(struct pci_pbm_info *pbm) } iotsb->iotsb_num = iotsb_num; + err = dma_4v_iotsb_bind(pbm->devhandle, iotsb_num, pbm->pci_bus); + if (err) { + pr_err(PFX "pci_iotsb_bind failed error: %ld\n", err); + goto iotsb_conf_failed; + } + return 0; iotsb_conf_failed: diff --git a/arch/sparc/kernel/pci_sun4v.h b/arch/sparc/kernel/pci_sun4v.h index 0ef6d1c456e7..1019e0fe6e9d 100644 --- a/arch/sparc/kernel/pci_sun4v.h +++ b/arch/sparc/kernel/pci_sun4v.h @@ -96,4 +96,7 @@ unsigned long pci_sun4v_iotsb_conf(unsigned long devhandle, unsigned long page_size, unsigned long dvma_base, u64 *iotsb_num); +unsigned long pci_sun4v_iotsb_bind(unsigned long devhandle, + unsigned long iotsb_num, + unsigned int pci_device); #endif /* !(_PCI_SUN4V_H) */ diff --git a/arch/sparc/kernel/pci_sun4v_asm.S b/arch/sparc/kernel/pci_sun4v_asm.S index fd94d0e4a41d..22024a96c317 100644 --- a/arch/sparc/kernel/pci_sun4v_asm.S +++ b/arch/sparc/kernel/pci_sun4v_asm.S @@ -378,3 +378,17 @@ ENTRY(pci_sun4v_iotsb_conf) retl stx %o1, [%g1] ENDPROC(pci_sun4v_iotsb_conf) + + /* + * %o0: devhandle + * %o1: iotsb_num/iotsb_handle + * %o2: pci_device + * + * returns %o0: status + */ +ENTRY(pci_sun4v_iotsb_bind) + mov HV_FAST_PCI_IOTSB_BIND, %o5 + ta HV_FAST_TRAP + retl + nop +ENDPROC(pci_sun4v_iotsb_bind) From f08978b0fdbf37d3c91efb60a20bdee3ba8f59c6 Mon Sep 17 00:00:00 2001 From: Tushar Dave Date: Fri, 28 Oct 2016 10:12:44 -0700 Subject: [PATCH 757/792] sparc64: Enable sun4v dma ops to use IOMMU v2 APIs Add Hypervisor IOMMU v2 APIs pci_iotsb_map(), pci_iotsb_demap() and enable sun4v dma ops to use IOMMU v2 API for all PCIe devices with 64bit DMA mask. Signed-off-by: Tushar Dave Reviewed-by: chris hyser Acked-by: Sowmini Varadhan Signed-off-by: David S. Miller --- arch/sparc/include/asm/hypervisor.h | 6 + arch/sparc/kernel/pci_sun4v.c | 216 ++++++++++++++++++++-------- arch/sparc/kernel/pci_sun4v.h | 11 ++ arch/sparc/kernel/pci_sun4v_asm.S | 36 +++++ 4 files changed, 211 insertions(+), 58 deletions(-) diff --git a/arch/sparc/include/asm/hypervisor.h b/arch/sparc/include/asm/hypervisor.h index 7b15df8be008..73cb8978df58 100644 --- a/arch/sparc/include/asm/hypervisor.h +++ b/arch/sparc/include/asm/hypervisor.h @@ -2377,6 +2377,12 @@ unsigned long sun4v_vintr_set_target(unsigned long dev_handle, * iotsb_index Zero-based IOTTE number within an IOTSB. */ +/* The index_count argument consists of two fields: + * bits 63:48 #iottes and bits 47:0 iotsb_index + */ +#define HV_PCI_IOTSB_INDEX_COUNT(__iottes, __iotsb_index) \ + (((u64)(__iottes) << 48UL) | ((u64)(__iotsb_index))) + /* pci_iotsb_conf() * TRAP: HV_FAST_TRAP * FUNCTION: HV_FAST_PCI_IOTSB_CONF diff --git a/arch/sparc/kernel/pci_sun4v.c b/arch/sparc/kernel/pci_sun4v.c index d4208aa93383..06981cc716b6 100644 --- a/arch/sparc/kernel/pci_sun4v.c +++ b/arch/sparc/kernel/pci_sun4v.c @@ -72,34 +72,57 @@ static inline void iommu_batch_start(struct device *dev, unsigned long prot, uns } /* Interrupts must be disabled. */ -static long iommu_batch_flush(struct iommu_batch *p) +static long iommu_batch_flush(struct iommu_batch *p, u64 mask) { struct pci_pbm_info *pbm = p->dev->archdata.host_controller; + u64 *pglist = p->pglist; + u64 index_count; unsigned long devhandle = pbm->devhandle; unsigned long prot = p->prot; unsigned long entry = p->entry; - u64 *pglist = p->pglist; unsigned long npages = p->npages; + unsigned long iotsb_num; + unsigned long ret; + long num; /* VPCI maj=1, min=[0,1] only supports read and write */ if (vpci_major < 2) prot &= (HV_PCI_MAP_ATTR_READ | HV_PCI_MAP_ATTR_WRITE); while (npages != 0) { - long num; - - num = pci_sun4v_iommu_map(devhandle, HV_PCI_TSBID(0, entry), - npages, prot, __pa(pglist)); - if (unlikely(num < 0)) { - if (printk_ratelimit()) - printk("iommu_batch_flush: IOMMU map of " - "[%08lx:%08llx:%lx:%lx:%lx] failed with " - "status %ld\n", - devhandle, HV_PCI_TSBID(0, entry), - npages, prot, __pa(pglist), num); - return -1; + if (mask <= DMA_BIT_MASK(32)) { + num = pci_sun4v_iommu_map(devhandle, + HV_PCI_TSBID(0, entry), + npages, + prot, + __pa(pglist)); + if (unlikely(num < 0)) { + pr_err_ratelimited("%s: IOMMU map of [%08lx:%08llx:%lx:%lx:%lx] failed with status %ld\n", + __func__, + devhandle, + HV_PCI_TSBID(0, entry), + npages, prot, __pa(pglist), + num); + return -1; + } + } else { + index_count = HV_PCI_IOTSB_INDEX_COUNT(npages, entry), + iotsb_num = pbm->iommu->atu->iotsb->iotsb_num; + ret = pci_sun4v_iotsb_map(devhandle, + iotsb_num, + index_count, + prot, + __pa(pglist), + &num); + if (unlikely(ret != HV_EOK)) { + pr_err_ratelimited("%s: ATU map of [%08lx:%lx:%llx:%lx:%lx] failed with status %ld\n", + __func__, + devhandle, iotsb_num, + index_count, prot, + __pa(pglist), ret); + return -1; + } } - entry += num; npages -= num; pglist += num; @@ -111,19 +134,19 @@ static long iommu_batch_flush(struct iommu_batch *p) return 0; } -static inline void iommu_batch_new_entry(unsigned long entry) +static inline void iommu_batch_new_entry(unsigned long entry, u64 mask) { struct iommu_batch *p = this_cpu_ptr(&iommu_batch); if (p->entry + p->npages == entry) return; if (p->entry != ~0UL) - iommu_batch_flush(p); + iommu_batch_flush(p, mask); p->entry = entry; } /* Interrupts must be disabled. */ -static inline long iommu_batch_add(u64 phys_page) +static inline long iommu_batch_add(u64 phys_page, u64 mask) { struct iommu_batch *p = this_cpu_ptr(&iommu_batch); @@ -131,28 +154,31 @@ static inline long iommu_batch_add(u64 phys_page) p->pglist[p->npages++] = phys_page; if (p->npages == PGLIST_NENTS) - return iommu_batch_flush(p); + return iommu_batch_flush(p, mask); return 0; } /* Interrupts must be disabled. */ -static inline long iommu_batch_end(void) +static inline long iommu_batch_end(u64 mask) { struct iommu_batch *p = this_cpu_ptr(&iommu_batch); BUG_ON(p->npages >= PGLIST_NENTS); - return iommu_batch_flush(p); + return iommu_batch_flush(p, mask); } static void *dma_4v_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_addrp, gfp_t gfp, unsigned long attrs) { + u64 mask; unsigned long flags, order, first_page, npages, n; unsigned long prot = 0; struct iommu *iommu; + struct atu *atu; + struct iommu_map_table *tbl; struct page *page; void *ret; long entry; @@ -177,14 +203,21 @@ static void *dma_4v_alloc_coherent(struct device *dev, size_t size, memset((char *)first_page, 0, PAGE_SIZE << order); iommu = dev->archdata.iommu; + atu = iommu->atu; - entry = iommu_tbl_range_alloc(dev, &iommu->tbl, npages, NULL, + mask = dev->coherent_dma_mask; + if (mask <= DMA_BIT_MASK(32)) + tbl = &iommu->tbl; + else + tbl = &atu->tbl; + + entry = iommu_tbl_range_alloc(dev, tbl, npages, NULL, (unsigned long)(-1), 0); if (unlikely(entry == IOMMU_ERROR_CODE)) goto range_alloc_fail; - *dma_addrp = (iommu->tbl.table_map_base + (entry << IO_PAGE_SHIFT)); + *dma_addrp = (tbl->table_map_base + (entry << IO_PAGE_SHIFT)); ret = (void *) first_page; first_page = __pa(first_page); @@ -196,12 +229,12 @@ static void *dma_4v_alloc_coherent(struct device *dev, size_t size, entry); for (n = 0; n < npages; n++) { - long err = iommu_batch_add(first_page + (n * PAGE_SIZE)); + long err = iommu_batch_add(first_page + (n * PAGE_SIZE), mask); if (unlikely(err < 0L)) goto iommu_map_fail; } - if (unlikely(iommu_batch_end() < 0L)) + if (unlikely(iommu_batch_end(mask) < 0L)) goto iommu_map_fail; local_irq_restore(flags); @@ -209,7 +242,7 @@ static void *dma_4v_alloc_coherent(struct device *dev, size_t size, return ret; iommu_map_fail: - iommu_tbl_range_free(&iommu->tbl, *dma_addrp, npages, IOMMU_ERROR_CODE); + iommu_tbl_range_free(tbl, *dma_addrp, npages, IOMMU_ERROR_CODE); range_alloc_fail: free_pages(first_page, order); @@ -253,18 +286,27 @@ unsigned long dma_4v_iotsb_bind(unsigned long devhandle, return 0; } -static void dma_4v_iommu_demap(void *demap_arg, unsigned long entry, - unsigned long npages) +static void dma_4v_iommu_demap(struct device *dev, unsigned long devhandle, + dma_addr_t dvma, unsigned long iotsb_num, + unsigned long entry, unsigned long npages) { - u32 devhandle = *(u32 *)demap_arg; unsigned long num, flags; + unsigned long ret; local_irq_save(flags); do { - num = pci_sun4v_iommu_demap(devhandle, - HV_PCI_TSBID(0, entry), - npages); - + if (dvma <= DMA_BIT_MASK(32)) { + num = pci_sun4v_iommu_demap(devhandle, + HV_PCI_TSBID(0, entry), + npages); + } else { + ret = pci_sun4v_iotsb_demap(devhandle, iotsb_num, + entry, npages, &num); + if (unlikely(ret != HV_EOK)) { + pr_err_ratelimited("pci_iotsb_demap() failed with error: %ld\n", + ret); + } + } entry += num; npages -= num; } while (npages != 0); @@ -276,16 +318,28 @@ static void dma_4v_free_coherent(struct device *dev, size_t size, void *cpu, { struct pci_pbm_info *pbm; struct iommu *iommu; + struct atu *atu; + struct iommu_map_table *tbl; unsigned long order, npages, entry; + unsigned long iotsb_num; u32 devhandle; npages = IO_PAGE_ALIGN(size) >> IO_PAGE_SHIFT; iommu = dev->archdata.iommu; pbm = dev->archdata.host_controller; + atu = iommu->atu; devhandle = pbm->devhandle; - entry = ((dvma - iommu->tbl.table_map_base) >> IO_PAGE_SHIFT); - dma_4v_iommu_demap(&devhandle, entry, npages); - iommu_tbl_range_free(&iommu->tbl, dvma, npages, IOMMU_ERROR_CODE); + + if (dvma <= DMA_BIT_MASK(32)) { + tbl = &iommu->tbl; + iotsb_num = 0; /* we don't care for legacy iommu */ + } else { + tbl = &atu->tbl; + iotsb_num = atu->iotsb->iotsb_num; + } + entry = ((dvma - tbl->table_map_base) >> IO_PAGE_SHIFT); + dma_4v_iommu_demap(dev, devhandle, dvma, iotsb_num, entry, npages); + iommu_tbl_range_free(tbl, dvma, npages, IOMMU_ERROR_CODE); order = get_order(size); if (order < 10) free_pages((unsigned long)cpu, order); @@ -297,13 +351,17 @@ static dma_addr_t dma_4v_map_page(struct device *dev, struct page *page, unsigned long attrs) { struct iommu *iommu; + struct atu *atu; + struct iommu_map_table *tbl; + u64 mask; unsigned long flags, npages, oaddr; unsigned long i, base_paddr; - u32 bus_addr, ret; unsigned long prot; + dma_addr_t bus_addr, ret; long entry; iommu = dev->archdata.iommu; + atu = iommu->atu; if (unlikely(direction == DMA_NONE)) goto bad; @@ -312,13 +370,19 @@ static dma_addr_t dma_4v_map_page(struct device *dev, struct page *page, npages = IO_PAGE_ALIGN(oaddr + sz) - (oaddr & IO_PAGE_MASK); npages >>= IO_PAGE_SHIFT; - entry = iommu_tbl_range_alloc(dev, &iommu->tbl, npages, NULL, + mask = *dev->dma_mask; + if (mask <= DMA_BIT_MASK(32)) + tbl = &iommu->tbl; + else + tbl = &atu->tbl; + + entry = iommu_tbl_range_alloc(dev, tbl, npages, NULL, (unsigned long)(-1), 0); if (unlikely(entry == IOMMU_ERROR_CODE)) goto bad; - bus_addr = (iommu->tbl.table_map_base + (entry << IO_PAGE_SHIFT)); + bus_addr = (tbl->table_map_base + (entry << IO_PAGE_SHIFT)); ret = bus_addr | (oaddr & ~IO_PAGE_MASK); base_paddr = __pa(oaddr & IO_PAGE_MASK); prot = HV_PCI_MAP_ATTR_READ; @@ -333,11 +397,11 @@ static dma_addr_t dma_4v_map_page(struct device *dev, struct page *page, iommu_batch_start(dev, prot, entry); for (i = 0; i < npages; i++, base_paddr += IO_PAGE_SIZE) { - long err = iommu_batch_add(base_paddr); + long err = iommu_batch_add(base_paddr, mask); if (unlikely(err < 0L)) goto iommu_map_fail; } - if (unlikely(iommu_batch_end() < 0L)) + if (unlikely(iommu_batch_end(mask) < 0L)) goto iommu_map_fail; local_irq_restore(flags); @@ -350,7 +414,7 @@ bad: return DMA_ERROR_CODE; iommu_map_fail: - iommu_tbl_range_free(&iommu->tbl, bus_addr, npages, IOMMU_ERROR_CODE); + iommu_tbl_range_free(tbl, bus_addr, npages, IOMMU_ERROR_CODE); return DMA_ERROR_CODE; } @@ -360,7 +424,10 @@ static void dma_4v_unmap_page(struct device *dev, dma_addr_t bus_addr, { struct pci_pbm_info *pbm; struct iommu *iommu; + struct atu *atu; + struct iommu_map_table *tbl; unsigned long npages; + unsigned long iotsb_num; long entry; u32 devhandle; @@ -372,14 +439,23 @@ static void dma_4v_unmap_page(struct device *dev, dma_addr_t bus_addr, iommu = dev->archdata.iommu; pbm = dev->archdata.host_controller; + atu = iommu->atu; devhandle = pbm->devhandle; npages = IO_PAGE_ALIGN(bus_addr + sz) - (bus_addr & IO_PAGE_MASK); npages >>= IO_PAGE_SHIFT; bus_addr &= IO_PAGE_MASK; - entry = (bus_addr - iommu->tbl.table_map_base) >> IO_PAGE_SHIFT; - dma_4v_iommu_demap(&devhandle, entry, npages); - iommu_tbl_range_free(&iommu->tbl, bus_addr, npages, IOMMU_ERROR_CODE); + + if (bus_addr <= DMA_BIT_MASK(32)) { + iotsb_num = 0; /* we don't care for legacy iommu */ + tbl = &iommu->tbl; + } else { + iotsb_num = atu->iotsb->iotsb_num; + tbl = &atu->tbl; + } + entry = (bus_addr - tbl->table_map_base) >> IO_PAGE_SHIFT; + dma_4v_iommu_demap(dev, devhandle, bus_addr, iotsb_num, entry, npages); + iommu_tbl_range_free(tbl, bus_addr, npages, IOMMU_ERROR_CODE); } static int dma_4v_map_sg(struct device *dev, struct scatterlist *sglist, @@ -393,12 +469,17 @@ static int dma_4v_map_sg(struct device *dev, struct scatterlist *sglist, unsigned long seg_boundary_size; int outcount, incount, i; struct iommu *iommu; + struct atu *atu; + struct iommu_map_table *tbl; + u64 mask; unsigned long base_shift; long err; BUG_ON(direction == DMA_NONE); iommu = dev->archdata.iommu; + atu = iommu->atu; + if (nelems == 0 || !iommu) return 0; @@ -424,7 +505,15 @@ static int dma_4v_map_sg(struct device *dev, struct scatterlist *sglist, max_seg_size = dma_get_max_seg_size(dev); seg_boundary_size = ALIGN(dma_get_seg_boundary(dev) + 1, IO_PAGE_SIZE) >> IO_PAGE_SHIFT; - base_shift = iommu->tbl.table_map_base >> IO_PAGE_SHIFT; + + mask = *dev->dma_mask; + if (mask <= DMA_BIT_MASK(32)) + tbl = &iommu->tbl; + else + tbl = &atu->tbl; + + base_shift = tbl->table_map_base >> IO_PAGE_SHIFT; + for_each_sg(sglist, s, nelems, i) { unsigned long paddr, npages, entry, out_entry = 0, slen; @@ -437,27 +526,26 @@ static int dma_4v_map_sg(struct device *dev, struct scatterlist *sglist, /* Allocate iommu entries for that segment */ paddr = (unsigned long) SG_ENT_PHYS_ADDRESS(s); npages = iommu_num_pages(paddr, slen, IO_PAGE_SIZE); - entry = iommu_tbl_range_alloc(dev, &iommu->tbl, npages, + entry = iommu_tbl_range_alloc(dev, tbl, npages, &handle, (unsigned long)(-1), 0); /* Handle failure */ if (unlikely(entry == IOMMU_ERROR_CODE)) { - if (printk_ratelimit()) - printk(KERN_INFO "iommu_alloc failed, iommu %p paddr %lx" - " npages %lx\n", iommu, paddr, npages); + pr_err_ratelimited("iommu_alloc failed, iommu %p paddr %lx npages %lx\n", + tbl, paddr, npages); goto iommu_map_failed; } - iommu_batch_new_entry(entry); + iommu_batch_new_entry(entry, mask); /* Convert entry to a dma_addr_t */ - dma_addr = iommu->tbl.table_map_base + (entry << IO_PAGE_SHIFT); + dma_addr = tbl->table_map_base + (entry << IO_PAGE_SHIFT); dma_addr |= (s->offset & ~IO_PAGE_MASK); /* Insert into HW table */ paddr &= IO_PAGE_MASK; while (npages--) { - err = iommu_batch_add(paddr); + err = iommu_batch_add(paddr, mask); if (unlikely(err < 0L)) goto iommu_map_failed; paddr += IO_PAGE_SIZE; @@ -492,7 +580,7 @@ static int dma_4v_map_sg(struct device *dev, struct scatterlist *sglist, dma_next = dma_addr + slen; } - err = iommu_batch_end(); + err = iommu_batch_end(mask); if (unlikely(err < 0L)) goto iommu_map_failed; @@ -515,7 +603,7 @@ iommu_map_failed: vaddr = s->dma_address & IO_PAGE_MASK; npages = iommu_num_pages(s->dma_address, s->dma_length, IO_PAGE_SIZE); - iommu_tbl_range_free(&iommu->tbl, vaddr, npages, + iommu_tbl_range_free(tbl, vaddr, npages, IOMMU_ERROR_CODE); /* XXX demap? XXX */ s->dma_address = DMA_ERROR_CODE; @@ -536,13 +624,16 @@ static void dma_4v_unmap_sg(struct device *dev, struct scatterlist *sglist, struct pci_pbm_info *pbm; struct scatterlist *sg; struct iommu *iommu; + struct atu *atu; unsigned long flags, entry; + unsigned long iotsb_num; u32 devhandle; BUG_ON(direction == DMA_NONE); iommu = dev->archdata.iommu; pbm = dev->archdata.host_controller; + atu = iommu->atu; devhandle = pbm->devhandle; local_irq_save(flags); @@ -552,15 +643,24 @@ static void dma_4v_unmap_sg(struct device *dev, struct scatterlist *sglist, dma_addr_t dma_handle = sg->dma_address; unsigned int len = sg->dma_length; unsigned long npages; - struct iommu_map_table *tbl = &iommu->tbl; + struct iommu_map_table *tbl; unsigned long shift = IO_PAGE_SHIFT; if (!len) break; npages = iommu_num_pages(dma_handle, len, IO_PAGE_SIZE); + + if (dma_handle <= DMA_BIT_MASK(32)) { + iotsb_num = 0; /* we don't care for legacy iommu */ + tbl = &iommu->tbl; + } else { + iotsb_num = atu->iotsb->iotsb_num; + tbl = &atu->tbl; + } entry = ((dma_handle - tbl->table_map_base) >> shift); - dma_4v_iommu_demap(&devhandle, entry, npages); - iommu_tbl_range_free(&iommu->tbl, dma_handle, npages, + dma_4v_iommu_demap(dev, devhandle, dma_handle, iotsb_num, + entry, npages); + iommu_tbl_range_free(tbl, dma_handle, npages, IOMMU_ERROR_CODE); sg = sg_next(sg); } diff --git a/arch/sparc/kernel/pci_sun4v.h b/arch/sparc/kernel/pci_sun4v.h index 1019e0fe6e9d..22603a4e48bf 100644 --- a/arch/sparc/kernel/pci_sun4v.h +++ b/arch/sparc/kernel/pci_sun4v.h @@ -99,4 +99,15 @@ unsigned long pci_sun4v_iotsb_conf(unsigned long devhandle, unsigned long pci_sun4v_iotsb_bind(unsigned long devhandle, unsigned long iotsb_num, unsigned int pci_device); +unsigned long pci_sun4v_iotsb_map(unsigned long devhandle, + unsigned long iotsb_num, + unsigned long iotsb_index_iottes, + unsigned long io_attributes, + unsigned long io_page_list_pa, + long *mapped); +unsigned long pci_sun4v_iotsb_demap(unsigned long devhandle, + unsigned long iotsb_num, + unsigned long iotsb_index, + unsigned long iottes, + unsigned long *demapped); #endif /* !(_PCI_SUN4V_H) */ diff --git a/arch/sparc/kernel/pci_sun4v_asm.S b/arch/sparc/kernel/pci_sun4v_asm.S index 22024a96c317..578f09657916 100644 --- a/arch/sparc/kernel/pci_sun4v_asm.S +++ b/arch/sparc/kernel/pci_sun4v_asm.S @@ -392,3 +392,39 @@ ENTRY(pci_sun4v_iotsb_bind) retl nop ENDPROC(pci_sun4v_iotsb_bind) + + /* + * %o0: devhandle + * %o1: iotsb_num/iotsb_handle + * %o2: index_count + * %o3: iotte_attributes + * %o4: io_page_list_p + * %o5: &mapped + * + * returns %o0: status + * %o1: #mapped + */ +ENTRY(pci_sun4v_iotsb_map) + mov %o5, %g1 + mov HV_FAST_PCI_IOTSB_MAP, %o5 + ta HV_FAST_TRAP + retl + stx %o1, [%g1] +ENDPROC(pci_sun4v_iotsb_map) + + /* + * %o0: devhandle + * %o1: iotsb_num/iotsb_handle + * %o2: iotsb_index + * %o3: #iottes + * %o4: &demapped + * + * returns %o0: status + * %o1: #demapped + */ +ENTRY(pci_sun4v_iotsb_demap) + mov HV_FAST_PCI_IOTSB_DEMAP, %o5 + ta HV_FAST_TRAP + retl + stx %o1, [%o4] +ENDPROC(pci_sun4v_iotsb_demap) From d30a6b84df00128e03588564925dc828a53e6865 Mon Sep 17 00:00:00 2001 From: Tushar Dave Date: Fri, 28 Oct 2016 10:12:45 -0700 Subject: [PATCH 758/792] sparc64: Enable 64-bit DMA ATU 64bit addressing allows PCIe devices with 64bit DMA capabilities to use ATU for 64bit DMA. Signed-off-by: Tushar Dave Reviewed-by: chris hyser Acked-by: Sowmini Varadhan Signed-off-by: David S. Miller --- arch/sparc/Kconfig | 4 ++++ arch/sparc/kernel/iommu.c | 8 ++++++-- 2 files changed, 10 insertions(+), 2 deletions(-) diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index 5202eb4ba2db..60145c9b9f84 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -93,6 +93,10 @@ config ARCH_ATU bool default y if SPARC64 +config ARCH_DMA_ADDR_T_64BIT + bool + default y if ARCH_ATU + config IOMMU_HELPER bool default y if SPARC64 diff --git a/arch/sparc/kernel/iommu.c b/arch/sparc/kernel/iommu.c index 5c615abff030..852a3291db96 100644 --- a/arch/sparc/kernel/iommu.c +++ b/arch/sparc/kernel/iommu.c @@ -760,8 +760,12 @@ int dma_supported(struct device *dev, u64 device_mask) struct iommu *iommu = dev->archdata.iommu; u64 dma_addr_mask = iommu->dma_addr_mask; - if (device_mask >= (1UL << 32UL)) - return 0; + if (device_mask > DMA_BIT_MASK(32)) { + if (iommu->atu) + dma_addr_mask = iommu->atu->dma_addr_mask; + else + return 0; + } if ((device_mask & dma_addr_mask) == dma_addr_mask) return 1; From 266439c94df9e6aee3390c6e1cfdb645e566f704 Mon Sep 17 00:00:00 2001 From: Tushar Dave Date: Mon, 17 Oct 2016 13:56:59 -0700 Subject: [PATCH 759/792] sunqe: Fix compiler warnings MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit sunqe uses '__u32' for dma handle while invoking kernel DMA APIs, instead of using dma_addr_t. This hasn't caused any 'incompatible pointer type' warning on SPARC because until now dma_addr_t is of type u32. However, recent changes in SPARC ATU (iommu) enables 64bit DMA and therefore dma_addr_t becomes of type u64. This makes 'incompatible pointer type' warnings inevitable. e.g. drivers/net/ethernet/sun/sunqe.c: In function ‘qec_ether_init’: drivers/net/ethernet/sun/sunqe.c:883: warning: passing argument 3 of ‘dma_alloc_coherent’ from incompatible pointer type ./include/linux/dma-mapping.h:445: note: expected ‘dma_addr_t *’ but argument is of type ‘__u32 *’ drivers/net/ethernet/sun/sunqe.c:885: warning: passing argument 3 of ‘dma_alloc_coherent’ from incompatible pointer type ./include/linux/dma-mapping.h:445: note: expected ‘dma_addr_t *’ but argument is of type ‘__u32 *’ This patch resolves above compiler warnings. Signed-off-by: Tushar Dave Reviewed-by: chris hyser Signed-off-by: David S. Miller --- drivers/net/ethernet/sun/sunqe.c | 11 ++++++----- drivers/net/ethernet/sun/sunqe.h | 4 ++-- 2 files changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/net/ethernet/sun/sunqe.c b/drivers/net/ethernet/sun/sunqe.c index 9b825780b3be..9582948145c1 100644 --- a/drivers/net/ethernet/sun/sunqe.c +++ b/drivers/net/ethernet/sun/sunqe.c @@ -124,7 +124,7 @@ static void qe_init_rings(struct sunqe *qep) { struct qe_init_block *qb = qep->qe_block; struct sunqe_buffers *qbufs = qep->buffers; - __u32 qbufs_dvma = qep->buffers_dvma; + __u32 qbufs_dvma = (__u32)qep->buffers_dvma; int i; qep->rx_new = qep->rx_old = qep->tx_new = qep->tx_old = 0; @@ -144,6 +144,7 @@ static int qe_init(struct sunqe *qep, int from_irq) void __iomem *mregs = qep->mregs; void __iomem *gregs = qecp->gregs; unsigned char *e = &qep->dev->dev_addr[0]; + __u32 qblk_dvma = (__u32)qep->qblock_dvma; u32 tmp; int i; @@ -152,8 +153,8 @@ static int qe_init(struct sunqe *qep, int from_irq) return -EAGAIN; /* Setup initial rx/tx init block pointers. */ - sbus_writel(qep->qblock_dvma + qib_offset(qe_rxd, 0), cregs + CREG_RXDS); - sbus_writel(qep->qblock_dvma + qib_offset(qe_txd, 0), cregs + CREG_TXDS); + sbus_writel(qblk_dvma + qib_offset(qe_rxd, 0), cregs + CREG_RXDS); + sbus_writel(qblk_dvma + qib_offset(qe_txd, 0), cregs + CREG_TXDS); /* Enable/mask the various irq's. */ sbus_writel(0, cregs + CREG_RIMASK); @@ -413,7 +414,7 @@ static void qe_rx(struct sunqe *qep) struct net_device *dev = qep->dev; struct qe_rxd *this; struct sunqe_buffers *qbufs = qep->buffers; - __u32 qbufs_dvma = qep->buffers_dvma; + __u32 qbufs_dvma = (__u32)qep->buffers_dvma; int elem = qep->rx_new; u32 flags; @@ -572,7 +573,7 @@ static int qe_start_xmit(struct sk_buff *skb, struct net_device *dev) { struct sunqe *qep = netdev_priv(dev); struct sunqe_buffers *qbufs = qep->buffers; - __u32 txbuf_dvma, qbufs_dvma = qep->buffers_dvma; + __u32 txbuf_dvma, qbufs_dvma = (__u32)qep->buffers_dvma; unsigned char *txbuf; int len, entry; diff --git a/drivers/net/ethernet/sun/sunqe.h b/drivers/net/ethernet/sun/sunqe.h index 581781b6b2fa..ae190b77431b 100644 --- a/drivers/net/ethernet/sun/sunqe.h +++ b/drivers/net/ethernet/sun/sunqe.h @@ -334,12 +334,12 @@ struct sunqe { void __iomem *qcregs; /* QEC per-channel Registers */ void __iomem *mregs; /* Per-channel MACE Registers */ struct qe_init_block *qe_block; /* RX and TX descriptors */ - __u32 qblock_dvma; /* RX and TX descriptors */ + dma_addr_t qblock_dvma; /* RX and TX descriptors */ spinlock_t lock; /* Protects txfull state */ int rx_new, rx_old; /* RX ring extents */ int tx_new, tx_old; /* TX ring extents */ struct sunqe_buffers *buffers; /* CPU visible address. */ - __u32 buffers_dvma; /* DVMA visible address. */ + dma_addr_t buffers_dvma; /* DVMA visible address. */ struct sunqec *parent; u8 mconfig; /* Base MACE mconfig value */ struct platform_device *op; /* QE's OF device struct */ From 1a9bbccaf8182da368dae454b57dc1c55074d266 Mon Sep 17 00:00:00 2001 From: Tushar Dave Date: Mon, 17 Oct 2016 13:57:00 -0700 Subject: [PATCH 760/792] sunbmac: Fix compiler warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit sunbmac uses '__u32' for dma handle while invoking kernel DMA APIs, instead of using dma_addr_t. This hasn't caused any 'incompatible pointer type' warning on SPARC because until now dma_addr_t is of type u32. However, recent changes in SPARC ATU (iommu) enables 64bit DMA and therefore dma_addr_t becomes of type u64. This makes 'incompatible pointer type' warnings inevitable. e.g. drivers/net/ethernet/sun/sunbmac.c: In function ‘bigmac_ether_init’: drivers/net/ethernet/sun/sunbmac.c:1166: warning: passing argument 3 of ‘dma_alloc_coherent’ from incompatible pointer type ./include/linux/dma-mapping.h:445: note: expected ‘dma_addr_t *’ but argument is of type ‘__u32 *’ This patch resolves above compiler warning. Signed-off-by: Tushar Dave Reviewed-by: chris hyser Signed-off-by: David S. Miller --- drivers/net/ethernet/sun/sunbmac.c | 5 +++-- drivers/net/ethernet/sun/sunbmac.h | 2 +- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/sun/sunbmac.c b/drivers/net/ethernet/sun/sunbmac.c index aa4f9d2d8fa9..02f452730d52 100644 --- a/drivers/net/ethernet/sun/sunbmac.c +++ b/drivers/net/ethernet/sun/sunbmac.c @@ -623,6 +623,7 @@ static int bigmac_init_hw(struct bigmac *bp, int from_irq) void __iomem *gregs = bp->gregs; void __iomem *cregs = bp->creg; void __iomem *bregs = bp->bregs; + __u32 bblk_dvma = (__u32)bp->bblock_dvma; unsigned char *e = &bp->dev->dev_addr[0]; /* Latch current counters into statistics. */ @@ -671,9 +672,9 @@ static int bigmac_init_hw(struct bigmac *bp, int from_irq) bregs + BMAC_XIFCFG); /* Tell the QEC where the ring descriptors are. */ - sbus_writel(bp->bblock_dvma + bib_offset(be_rxd, 0), + sbus_writel(bblk_dvma + bib_offset(be_rxd, 0), cregs + CREG_RXDS); - sbus_writel(bp->bblock_dvma + bib_offset(be_txd, 0), + sbus_writel(bblk_dvma + bib_offset(be_txd, 0), cregs + CREG_TXDS); /* Setup the FIFO pointers into QEC local memory. */ diff --git a/drivers/net/ethernet/sun/sunbmac.h b/drivers/net/ethernet/sun/sunbmac.h index 06dd21707353..532fc56830cf 100644 --- a/drivers/net/ethernet/sun/sunbmac.h +++ b/drivers/net/ethernet/sun/sunbmac.h @@ -291,7 +291,7 @@ struct bigmac { void __iomem *bregs; /* BigMAC Registers */ void __iomem *tregs; /* BigMAC Transceiver */ struct bmac_init_block *bmac_block; /* RX and TX descriptors */ - __u32 bblock_dvma; /* RX and TX descriptors */ + dma_addr_t bblock_dvma; /* RX and TX descriptors */ spinlock_t lock; From e6b5f1be7afe1657c40c08082c562b1a036a54c1 Mon Sep 17 00:00:00 2001 From: Babu Moger Date: Wed, 2 Nov 2016 09:36:32 -0700 Subject: [PATCH 761/792] config: Adding the new config parameter CONFIG_PROVE_LOCKING_SMALL for sparc This new config parameter limits the space used for "Lock debugging: prove locking correctness" by about 4MB. The current sparc systems have the limitation of 32MB size for kernel size including .text, .data and .bss sections. With PROVE_LOCKING feature, the kernel size could grow beyond this limit and causing system boot-up issues. With this option, kernel limits the size of the entries of lock_chains, stack_trace etc., so that kernel fits in required size limit. This is not visible to user and only used for sparc. Signed-off-by: Babu Moger Acked-by: Sam Ravnborg Signed-off-by: David S. Miller --- arch/sparc/Kconfig | 1 + lib/Kconfig.debug | 3 +++ 2 files changed, 4 insertions(+) diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index 60145c9b9f84..165ecdd24d22 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -43,6 +43,7 @@ config SPARC select ARCH_HAS_SG_CHAIN select CPU_NO_EFFICIENT_FFS select HAVE_ARCH_HARDENED_USERCOPY + select PROVE_LOCKING_SMALL if PROVE_LOCKING config SPARC32 def_bool !64BIT diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index b01e547d4d04..a6c8db1d62f6 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -1085,6 +1085,9 @@ config PROVE_LOCKING For more details, see Documentation/locking/lockdep-design.txt. +config PROVE_LOCKING_SMALL + bool + config LOCKDEP bool depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT From e245d99e6cc4a0b904b87b46b4f60d46fb405987 Mon Sep 17 00:00:00 2001 From: Babu Moger Date: Wed, 2 Nov 2016 09:36:33 -0700 Subject: [PATCH 762/792] lockdep: Limit static allocations if PROVE_LOCKING_SMALL is defined Reduce the size of data structure for lockdep entries by half if PROVE_LOCKING_SMALL if defined. This is used only for sparc. Signed-off-by: Babu Moger Acked-by: Sam Ravnborg Signed-off-by: David S. Miller --- kernel/locking/lockdep_internals.h | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-) diff --git a/kernel/locking/lockdep_internals.h b/kernel/locking/lockdep_internals.h index 51c4b24b6328..c2b88490d857 100644 --- a/kernel/locking/lockdep_internals.h +++ b/kernel/locking/lockdep_internals.h @@ -45,6 +45,14 @@ enum { #define LOCKF_USED_IN_IRQ_READ \ (LOCKF_USED_IN_HARDIRQ_READ | LOCKF_USED_IN_SOFTIRQ_READ) +/* + * CONFIG_PROVE_LOCKING_SMALL is defined for sparc. Sparc requires .text, + * .data and .bss to fit in required 32MB limit for the kernel. With + * PROVE_LOCKING we could go over this limit and cause system boot-up problems. + * So, reduce the static allocations for lockdeps related structures so that + * everything fits in current required size limit. + */ +#ifdef CONFIG_PROVE_LOCKING_SMALL /* * MAX_LOCKDEP_ENTRIES is the maximum number of lock dependencies * we track. @@ -54,18 +62,24 @@ enum { * table (if it's not there yet), and we check it for lock order * conflicts and deadlocks. */ +#define MAX_LOCKDEP_ENTRIES 16384UL +#define MAX_LOCKDEP_CHAINS_BITS 15 +#define MAX_STACK_TRACE_ENTRIES 262144UL +#else #define MAX_LOCKDEP_ENTRIES 32768UL #define MAX_LOCKDEP_CHAINS_BITS 16 -#define MAX_LOCKDEP_CHAINS (1UL << MAX_LOCKDEP_CHAINS_BITS) - -#define MAX_LOCKDEP_CHAIN_HLOCKS (MAX_LOCKDEP_CHAINS*5) /* * Stack-trace: tightly packed array of stack backtrace * addresses. Protected by the hash_lock. */ #define MAX_STACK_TRACE_ENTRIES 524288UL +#endif + +#define MAX_LOCKDEP_CHAINS (1UL << MAX_LOCKDEP_CHAINS_BITS) + +#define MAX_LOCKDEP_CHAIN_HLOCKS (MAX_LOCKDEP_CHAINS*5) extern struct list_head all_lock_classes; extern struct lock_chain lock_chains[]; From dbfa048db97c15ee3fff2ee17b19e61f3ab12d53 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Tue, 15 Nov 2016 11:12:05 +0100 Subject: [PATCH 763/792] MAINTAINERS: Add LED subsystem co-maintainer Mark me as a co-maintainer of LED subsystem. Signed-off-by: Pavel Machek Signed-off-by: Jacek Anaszewski --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 411e3b87b8c2..2433e471634f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7084,6 +7084,7 @@ F: drivers/scsi/53c700* LED SUBSYSTEM M: Richard Purdie M: Jacek Anaszewski +M: Pavel Machek L: linux-leds@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds.git S: Maintained From 178c7ae944444c198a1d9646477ab10d2d51f03e Mon Sep 17 00:00:00 2001 From: Alexey Khoroshilov Date: Sat, 19 Nov 2016 01:40:10 +0300 Subject: [PATCH 764/792] net: macb: add check for dma mapping error in start_xmit() at91ether_start_xmit() does not check for dma mapping errors. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Signed-off-by: David S. Miller --- drivers/net/ethernet/cadence/macb.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c index b32444a3ed79..533653bd7aec 100644 --- a/drivers/net/ethernet/cadence/macb.c +++ b/drivers/net/ethernet/cadence/macb.c @@ -2673,6 +2673,12 @@ static int at91ether_start_xmit(struct sk_buff *skb, struct net_device *dev) lp->skb_length = skb->len; lp->skb_physaddr = dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE); + if (dma_mapping_error(NULL, lp->skb_physaddr)) { + dev_kfree_skb_any(skb); + dev->stats.tx_dropped++; + netdev_err(dev, "%s: DMA mapping error\n", __func__); + return NETDEV_TX_OK; + } /* Set address of the data in the Transmit Address register */ macb_writel(lp, TAR, lp->skb_physaddr); From 9dd35d6882a10629b95f2bc41a541740ef24c226 Mon Sep 17 00:00:00 2001 From: Geliang Tang Date: Fri, 18 Nov 2016 22:21:17 +0800 Subject: [PATCH 765/792] sparc: drop duplicate header scatterlist.h Drop duplicate header scatterlist.h from iommu_common.h. Signed-off-by: Geliang Tang Signed-off-by: David S. Miller --- arch/sparc/kernel/iommu_common.h | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/sparc/kernel/iommu_common.h b/arch/sparc/kernel/iommu_common.h index b40cec252905..828493329f68 100644 --- a/arch/sparc/kernel/iommu_common.h +++ b/arch/sparc/kernel/iommu_common.h @@ -13,7 +13,6 @@ #include #include #include -#include #include From 8b9534406456313beb7bf9051150b50c63049ab7 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Wed, 16 Nov 2016 18:31:30 +0100 Subject: [PATCH 766/792] KVM: x86: do not go through vcpu in __get_kvmclock_ns MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Going through the first VCPU is wrong if you follow a KVM_SET_CLOCK with a KVM_GET_CLOCK immediately after, without letting the VCPU run and call kvm_guest_time_update. To fix this, compute the kvmclock value ourselves, using the master clock (tsc, nsec) pair as the base and the host CPU frequency as the scale. Reported-by: Marcelo Tosatti Signed-off-by: Paolo Bonzini Signed-off-by: Radim Krčmář --- arch/x86/kvm/x86.c | 21 +++++++++++++-------- 1 file changed, 13 insertions(+), 8 deletions(-) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 3017de0431bd..7d3d9d4d6124 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -1724,18 +1724,23 @@ static void kvm_gen_update_masterclock(struct kvm *kvm) static u64 __get_kvmclock_ns(struct kvm *kvm) { - struct kvm_vcpu *vcpu = kvm_get_vcpu(kvm, 0); struct kvm_arch *ka = &kvm->arch; - s64 ns; + struct pvclock_vcpu_time_info hv_clock; - if (vcpu->arch.hv_clock.flags & PVCLOCK_TSC_STABLE_BIT) { - u64 tsc = kvm_read_l1_tsc(vcpu, rdtsc()); - ns = __pvclock_read_cycles(&vcpu->arch.hv_clock, tsc); - } else { - ns = ktime_get_boot_ns() + ka->kvmclock_offset; + spin_lock(&ka->pvclock_gtod_sync_lock); + if (!ka->use_master_clock) { + spin_unlock(&ka->pvclock_gtod_sync_lock); + return ktime_get_boot_ns() + ka->kvmclock_offset; } - return ns; + hv_clock.tsc_timestamp = ka->master_cycle_now; + hv_clock.system_time = ka->master_kernel_ns + ka->kvmclock_offset; + spin_unlock(&ka->pvclock_gtod_sync_lock); + + kvm_get_time_scale(NSEC_PER_SEC, __this_cpu_read(cpu_tsc_khz) * 1000LL, + &hv_clock.tsc_shift, + &hv_clock.tsc_to_system_mul); + return __pvclock_read_cycles(&hv_clock, rdtsc()); } u64 get_kvmclock_ns(struct kvm *kvm) From 1650b4ebc99da4c137bfbfc531be4a2405f951dd Mon Sep 17 00:00:00 2001 From: Ignacio Alvarado Date: Fri, 4 Nov 2016 12:15:55 -0700 Subject: [PATCH 767/792] KVM: Disable irq while unregistering user notifier MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Function user_notifier_unregister should be called only once for each registered user notifier. Function kvm_arch_hardware_disable can be executed from an IPI context which could cause a race condition with a VCPU returning to user mode and attempting to unregister the notifier. Signed-off-by: Ignacio Alvarado Cc: stable@vger.kernel.org Fixes: 18863bdd60f8 ("KVM: x86 shared msr infrastructure") Reviewed-by: Paolo Bonzini Signed-off-by: Radim Krčmář --- arch/x86/kvm/x86.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 7d3d9d4d6124..2f27af4f312a 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -210,7 +210,18 @@ static void kvm_on_user_return(struct user_return_notifier *urn) struct kvm_shared_msrs *locals = container_of(urn, struct kvm_shared_msrs, urn); struct kvm_shared_msr_values *values; + unsigned long flags; + /* + * Disabling irqs at this point since the following code could be + * interrupted and executed through kvm_arch_hardware_disable() + */ + local_irq_save(flags); + if (locals->registered) { + locals->registered = false; + user_return_notifier_unregister(urn); + } + local_irq_restore(flags); for (slot = 0; slot < shared_msrs_global.nr; ++slot) { values = &locals->values[slot]; if (values->host != values->curr) { @@ -218,8 +229,6 @@ static void kvm_on_user_return(struct user_return_notifier *urn) values->curr = values->host; } } - locals->registered = false; - user_return_notifier_unregister(urn); } static void shared_msr_update(unsigned slot, u32 msr) From e3fd9a93a12a1020067a676e826877623cee8e2b Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Wed, 9 Nov 2016 17:48:15 +0100 Subject: [PATCH 768/792] kvm: kvmclock: let KVM_GET_CLOCK return whether the master clock is in use MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Userspace can read the exact value of kvmclock by reading the TSC and fetching the timekeeping parameters out of guest memory. This however is brittle and not necessary anymore with KVM 4.11. Provide a mechanism that lets userspace know if the new KVM_GET_CLOCK semantics are in effect, and---since we are at it---if the clock is stable across all VCPUs. Cc: Radim Krčmář Cc: Marcelo Tosatti Signed-off-by: Paolo Bonzini Signed-off-by: Radim Krčmář --- Documentation/virtual/kvm/api.txt | 11 +++++++++++ arch/x86/kvm/x86.c | 10 +++++++--- include/uapi/linux/kvm.h | 7 +++++++ 3 files changed, 25 insertions(+), 3 deletions(-) diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index 739db9ab16b2..6bbceb9a3a19 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -777,6 +777,17 @@ Gets the current timestamp of kvmclock as seen by the current guest. In conjunction with KVM_SET_CLOCK, it is used to ensure monotonicity on scenarios such as migration. +When KVM_CAP_ADJUST_CLOCK is passed to KVM_CHECK_EXTENSION, it returns the +set of bits that KVM can return in struct kvm_clock_data's flag member. + +The only flag defined now is KVM_CLOCK_TSC_STABLE. If set, the returned +value is the exact kvmclock value seen by all VCPUs at the instant +when KVM_GET_CLOCK was called. If clear, the returned value is simply +CLOCK_MONOTONIC plus a constant offset; the offset can be modified +with KVM_SET_CLOCK. KVM will try to make all VCPUs follow this clock, +but the exact value read by each VCPU could differ, because the host +TSC is not stable. + struct kvm_clock_data { __u64 clock; /* kvmclock current value */ __u32 flags; diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 2f27af4f312a..3320804bb2ac 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -2610,7 +2610,6 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext) case KVM_CAP_PIT_STATE2: case KVM_CAP_SET_IDENTITY_MAP_ADDR: case KVM_CAP_XEN_HVM: - case KVM_CAP_ADJUST_CLOCK: case KVM_CAP_VCPU_EVENTS: case KVM_CAP_HYPERV: case KVM_CAP_HYPERV_VAPIC: @@ -2637,6 +2636,9 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext) #endif r = 1; break; + case KVM_CAP_ADJUST_CLOCK: + r = KVM_CLOCK_TSC_STABLE; + break; case KVM_CAP_X86_SMM: /* SMBASE is usually relocated above 1M on modern chipsets, * and SMM handlers might indeed rely on 4G segment limits, @@ -4117,9 +4119,11 @@ long kvm_arch_vm_ioctl(struct file *filp, struct kvm_clock_data user_ns; u64 now_ns; - now_ns = get_kvmclock_ns(kvm); + local_irq_disable(); + now_ns = __get_kvmclock_ns(kvm); user_ns.clock = now_ns; - user_ns.flags = 0; + user_ns.flags = kvm->arch.use_master_clock ? KVM_CLOCK_TSC_STABLE : 0; + local_irq_enable(); memset(&user_ns.pad, 0, sizeof(user_ns.pad)); r = -EFAULT; diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index 300ef255d1e0..4ee67cb99143 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -972,12 +972,19 @@ struct kvm_irqfd { __u8 pad[16]; }; +/* For KVM_CAP_ADJUST_CLOCK */ + +/* Do not use 1, KVM_CHECK_EXTENSION returned it before we had flags. */ +#define KVM_CLOCK_TSC_STABLE 2 + struct kvm_clock_data { __u64 clock; __u32 flags; __u32 pad[9]; }; +/* For KVM_CAP_SW_TLB */ + #define KVM_MMU_FSL_BOOKE_NOHV 0 #define KVM_MMU_FSL_BOOKE_HV 1 From 22583f0d9c85e60c9860bc8a0ebff59fe08be6d7 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Thu, 17 Nov 2016 15:55:45 +0100 Subject: [PATCH 769/792] KVM: async_pf: avoid recursive flushing of work items MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This was reported by syzkaller: [ INFO: possible recursive locking detected ] 4.9.0-rc4+ #49 Not tainted --------------------------------------------- kworker/2:1/5658 is trying to acquire lock: ([ 1644.769018] (&work->work) [< inline >] list_empty include/linux/compiler.h:243 [] flush_work+0x0/0x660 kernel/workqueue.c:1511 but task is already holding lock: ([ 1644.769018] (&work->work) [] process_one_work+0x94b/0x1900 kernel/workqueue.c:2093 stack backtrace: CPU: 2 PID: 5658 Comm: kworker/2:1 Not tainted 4.9.0-rc4+ #49 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: events async_pf_execute ffff8800676ff630 ffffffff81c2e46b ffffffff8485b930 ffff88006b1fc480 0000000000000000 ffffffff8485b930 ffff8800676ff7e0 ffffffff81339b27 ffff8800676ff7e8 0000000000000046 ffff88006b1fcce8 ffff88006b1fccf0 Call Trace: ... [] flush_work+0x93/0x660 kernel/workqueue.c:2846 [] __cancel_work_timer+0x17a/0x410 kernel/workqueue.c:2916 [] cancel_work_sync+0x17/0x20 kernel/workqueue.c:2951 [] kvm_clear_async_pf_completion_queue+0xd7/0x400 virt/kvm/async_pf.c:126 [< inline >] kvm_free_vcpus arch/x86/kvm/x86.c:7841 [] kvm_arch_destroy_vm+0x23d/0x620 arch/x86/kvm/x86.c:7946 [< inline >] kvm_destroy_vm virt/kvm/kvm_main.c:731 [] kvm_put_kvm+0x40e/0x790 virt/kvm/kvm_main.c:752 [] async_pf_execute+0x23d/0x4f0 virt/kvm/async_pf.c:111 [] process_one_work+0x9fc/0x1900 kernel/workqueue.c:2096 [] worker_thread+0xef/0x1480 kernel/workqueue.c:2230 [] kthread+0x244/0x2d0 kernel/kthread.c:209 [] ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:433 The reason is that kvm_put_kvm is causing the destruction of the VM, but the page fault is still on the ->queue list. The ->queue list is owned by the VCPU, not by the work items, so we cannot just add list_del to the work item. Instead, use work->vcpu to note async page faults that have been resolved and will be processed through the done list. There is no need to flush those. Cc: Dmitry Vyukov Signed-off-by: Paolo Bonzini Signed-off-by: Radim Krčmář --- virt/kvm/async_pf.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/virt/kvm/async_pf.c b/virt/kvm/async_pf.c index 8035cc1eb955..efeceb0a222d 100644 --- a/virt/kvm/async_pf.c +++ b/virt/kvm/async_pf.c @@ -91,6 +91,7 @@ static void async_pf_execute(struct work_struct *work) spin_lock(&vcpu->async_pf.lock); list_add_tail(&apf->link, &vcpu->async_pf.done); + apf->vcpu = NULL; spin_unlock(&vcpu->async_pf.lock); /* @@ -113,6 +114,8 @@ static void async_pf_execute(struct work_struct *work) void kvm_clear_async_pf_completion_queue(struct kvm_vcpu *vcpu) { + spin_lock(&vcpu->async_pf.lock); + /* cancel outstanding work queue item */ while (!list_empty(&vcpu->async_pf.queue)) { struct kvm_async_pf *work = @@ -120,6 +123,14 @@ void kvm_clear_async_pf_completion_queue(struct kvm_vcpu *vcpu) typeof(*work), queue); list_del(&work->queue); + /* + * We know it's present in vcpu->async_pf.done, do + * nothing here. + */ + if (!work->vcpu) + continue; + + spin_unlock(&vcpu->async_pf.lock); #ifdef CONFIG_KVM_ASYNC_PF_SYNC flush_work(&work->work); #else @@ -129,9 +140,9 @@ void kvm_clear_async_pf_completion_queue(struct kvm_vcpu *vcpu) kmem_cache_free(async_pf_cache, work); } #endif + spin_lock(&vcpu->async_pf.lock); } - spin_lock(&vcpu->async_pf.lock); while (!list_empty(&vcpu->async_pf.done)) { struct kvm_async_pf *work = list_first_entry(&vcpu->async_pf.done, From 7301d6abaea926d685832f7e1f0c37dd206b01f4 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Thu, 17 Nov 2016 15:55:46 +0100 Subject: [PATCH 770/792] KVM: x86: fix missed SRCU usage in kvm_lapic_set_vapic_addr MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Reported by syzkaller: [ INFO: suspicious RCU usage. ] 4.9.0-rc4+ #47 Not tainted ------------------------------- ./include/linux/kvm_host.h:536 suspicious rcu_dereference_check() usage! stack backtrace: CPU: 1 PID: 6679 Comm: syz-executor Not tainted 4.9.0-rc4+ #47 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 ffff880039e2f6d0 ffffffff81c2e46b ffff88003e3a5b40 0000000000000000 0000000000000001 ffffffff83215600 ffff880039e2f700 ffffffff81334ea9 ffffc9000730b000 0000000000000004 ffff88003c4f8420 ffff88003d3f8000 Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [] dump_stack+0xb3/0x118 lib/dump_stack.c:51 [] lockdep_rcu_suspicious+0x139/0x180 kernel/locking/lockdep.c:4445 [< inline >] __kvm_memslots include/linux/kvm_host.h:534 [< inline >] kvm_memslots include/linux/kvm_host.h:541 [] kvm_gfn_to_hva_cache_init+0xa1e/0xce0 virt/kvm/kvm_main.c:1941 [] kvm_lapic_set_vapic_addr+0xed/0x140 arch/x86/kvm/lapic.c:2217 Reported-by: Dmitry Vyukov Fixes: fda4e2e85589191b123d31cdc21fd33ee70f50fd Cc: Andrew Honig Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini Reviewed-by: David Hildenbrand Signed-off-by: Radim Krčmář --- arch/x86/kvm/x86.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 3320804bb2ac..04c5d96b1d67 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -3431,6 +3431,7 @@ long kvm_arch_vcpu_ioctl(struct file *filp, }; case KVM_SET_VAPIC_ADDR: { struct kvm_vapic_addr va; + int idx; r = -EINVAL; if (!lapic_in_kernel(vcpu)) @@ -3438,7 +3439,9 @@ long kvm_arch_vcpu_ioctl(struct file *filp, r = -EFAULT; if (copy_from_user(&va, argp, sizeof va)) goto out; + idx = srcu_read_lock(&vcpu->kvm->srcu); r = kvm_lapic_set_vapic_addr(vcpu, va.vapic_addr); + srcu_read_unlock(&vcpu->kvm->srcu, idx); break; } case KVM_X86_SETUP_MCE: { From a2b07739ff5ded8ca7e9c7ff0749ed6f0d36aee2 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Thu, 17 Nov 2016 15:55:47 +0100 Subject: [PATCH 771/792] kvm: x86: merge kvm_arch_set_irq and kvm_arch_set_irq_inatomic MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit kvm_arch_set_irq is unused since commit b97e6de9c96. Merge its functionality with kvm_arch_set_irq_inatomic. Reported-by: Jiang Biao Signed-off-by: Paolo Bonzini Reviewed-by: David Hildenbrand Signed-off-by: Radim Krčmář --- arch/x86/kvm/irq_comm.c | 58 +++++++++++++++++++---------------------- 1 file changed, 27 insertions(+), 31 deletions(-) diff --git a/arch/x86/kvm/irq_comm.c b/arch/x86/kvm/irq_comm.c index 25810b144b58..4da03030d5a7 100644 --- a/arch/x86/kvm/irq_comm.c +++ b/arch/x86/kvm/irq_comm.c @@ -156,6 +156,16 @@ int kvm_set_msi(struct kvm_kernel_irq_routing_entry *e, } +static int kvm_hv_set_sint(struct kvm_kernel_irq_routing_entry *e, + struct kvm *kvm, int irq_source_id, int level, + bool line_status) +{ + if (!level) + return -1; + + return kvm_hv_synic_set_irq(kvm, e->hv_sint.vcpu, e->hv_sint.sint); +} + int kvm_arch_set_irq_inatomic(struct kvm_kernel_irq_routing_entry *e, struct kvm *kvm, int irq_source_id, int level, bool line_status) @@ -163,18 +173,26 @@ int kvm_arch_set_irq_inatomic(struct kvm_kernel_irq_routing_entry *e, struct kvm_lapic_irq irq; int r; - if (unlikely(e->type != KVM_IRQ_ROUTING_MSI)) - return -EWOULDBLOCK; + switch (e->type) { + case KVM_IRQ_ROUTING_HV_SINT: + return kvm_hv_set_sint(e, kvm, irq_source_id, level, + line_status); - if (kvm_msi_route_invalid(kvm, e)) - return -EINVAL; + case KVM_IRQ_ROUTING_MSI: + if (kvm_msi_route_invalid(kvm, e)) + return -EINVAL; - kvm_set_msi_irq(kvm, e, &irq); + kvm_set_msi_irq(kvm, e, &irq); - if (kvm_irq_delivery_to_apic_fast(kvm, NULL, &irq, &r, NULL)) - return r; - else - return -EWOULDBLOCK; + if (kvm_irq_delivery_to_apic_fast(kvm, NULL, &irq, &r, NULL)) + return r; + break; + + default: + break; + } + + return -EWOULDBLOCK; } int kvm_request_irq_source_id(struct kvm *kvm) @@ -254,16 +272,6 @@ void kvm_fire_mask_notifiers(struct kvm *kvm, unsigned irqchip, unsigned pin, srcu_read_unlock(&kvm->irq_srcu, idx); } -static int kvm_hv_set_sint(struct kvm_kernel_irq_routing_entry *e, - struct kvm *kvm, int irq_source_id, int level, - bool line_status) -{ - if (!level) - return -1; - - return kvm_hv_synic_set_irq(kvm, e->hv_sint.vcpu, e->hv_sint.sint); -} - int kvm_set_routing_entry(struct kvm *kvm, struct kvm_kernel_irq_routing_entry *e, const struct kvm_irq_routing_entry *ue) @@ -423,18 +431,6 @@ void kvm_scan_ioapic_routes(struct kvm_vcpu *vcpu, srcu_read_unlock(&kvm->irq_srcu, idx); } -int kvm_arch_set_irq(struct kvm_kernel_irq_routing_entry *irq, struct kvm *kvm, - int irq_source_id, int level, bool line_status) -{ - switch (irq->type) { - case KVM_IRQ_ROUTING_HV_SINT: - return kvm_hv_set_sint(irq, kvm, irq_source_id, level, - line_status); - default: - return -EWOULDBLOCK; - } -} - void kvm_arch_irq_routing_update(struct kvm *kvm) { kvm_hv_irq_routing_update(kvm); From ad092de60f865c1ad94221bd06d381ecea446cc8 Mon Sep 17 00:00:00 2001 From: Alex Hemme Date: Sat, 19 Nov 2016 10:48:38 +0100 Subject: [PATCH 772/792] i2c: i2c-mux-pca954x: fix deselect enabling for device-tree Deselect functionality can be ignored for device-trees with "i2c-mux-idle-disconnect" entries if no platform_data is available. By enabling the deselect functionality outside the platform_data block the logic works as it did in previous kernels. Fixes: 7fcac9807175 ("i2c: i2c-mux-pca954x: convert to use an explicit i2c mux core") Cc: # v4.7+ Signed-off-by: Alex Hemme Signed-off-by: Ziyang Wu [touched up a few minor issues /peda] Signed-off-by: Peter Rosin Signed-off-by: Wolfram Sang --- drivers/i2c/muxes/i2c-mux-pca954x.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c index 1091346f2480..8bc3d36d2837 100644 --- a/drivers/i2c/muxes/i2c-mux-pca954x.c +++ b/drivers/i2c/muxes/i2c-mux-pca954x.c @@ -268,9 +268,9 @@ static int pca954x_probe(struct i2c_client *client, /* discard unconfigured channels */ break; idle_disconnect_pd = pdata->modes[num].deselect_on_exit; - data->deselect |= (idle_disconnect_pd - || idle_disconnect_dt) << num; } + data->deselect |= (idle_disconnect_pd || + idle_disconnect_dt) << num; ret = i2c_mux_add_adapter(muxc, force, num, class); From 3c7018ebf8dbf14e7cd4f5dc648c51fc979f45bb Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Sun, 13 Nov 2016 20:35:52 -0500 Subject: [PATCH 773/792] fscrypto: don't use on-stack buffer for filename encryption With the new (in 4.9) option to use a virtually-mapped stack (CONFIG_VMAP_STACK), stack buffers cannot be used as input/output for the scatterlist crypto API because they may not be directly mappable to struct page. For short filenames, fname_encrypt() was encrypting a stack buffer holding the padded filename. Fix it by encrypting the filename in-place in the output buffer, thereby making the temporary buffer unnecessary. This bug could most easily be observed in a CONFIG_DEBUG_SG kernel because this allowed the BUG in sg_set_buf() to be triggered. Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers Signed-off-by: Theodore Ts'o --- fs/crypto/fname.c | 53 +++++++++++++++++++---------------------------- 1 file changed, 21 insertions(+), 32 deletions(-) diff --git a/fs/crypto/fname.c b/fs/crypto/fname.c index 9a28133ac3b8..9b774f4b50c8 100644 --- a/fs/crypto/fname.c +++ b/fs/crypto/fname.c @@ -39,65 +39,54 @@ static void fname_crypt_complete(struct crypto_async_request *req, int res) static int fname_encrypt(struct inode *inode, const struct qstr *iname, struct fscrypt_str *oname) { - u32 ciphertext_len; struct skcipher_request *req = NULL; DECLARE_FS_COMPLETION_RESULT(ecr); struct fscrypt_info *ci = inode->i_crypt_info; struct crypto_skcipher *tfm = ci->ci_ctfm; int res = 0; char iv[FS_CRYPTO_BLOCK_SIZE]; - struct scatterlist src_sg, dst_sg; + struct scatterlist sg; int padding = 4 << (ci->ci_flags & FS_POLICY_FLAGS_PAD_MASK); - char *workbuf, buf[32], *alloc_buf = NULL; - unsigned lim; + unsigned int lim; + unsigned int cryptlen; lim = inode->i_sb->s_cop->max_namelen(inode); if (iname->len <= 0 || iname->len > lim) return -EIO; - ciphertext_len = max(iname->len, (u32)FS_CRYPTO_BLOCK_SIZE); - ciphertext_len = round_up(ciphertext_len, padding); - ciphertext_len = min(ciphertext_len, lim); + /* + * Copy the filename to the output buffer for encrypting in-place and + * pad it with the needed number of NUL bytes. + */ + cryptlen = max_t(unsigned int, iname->len, FS_CRYPTO_BLOCK_SIZE); + cryptlen = round_up(cryptlen, padding); + cryptlen = min(cryptlen, lim); + memcpy(oname->name, iname->name, iname->len); + memset(oname->name + iname->len, 0, cryptlen - iname->len); - if (ciphertext_len <= sizeof(buf)) { - workbuf = buf; - } else { - alloc_buf = kmalloc(ciphertext_len, GFP_NOFS); - if (!alloc_buf) - return -ENOMEM; - workbuf = alloc_buf; - } + /* Initialize the IV */ + memset(iv, 0, FS_CRYPTO_BLOCK_SIZE); - /* Allocate request */ + /* Set up the encryption request */ req = skcipher_request_alloc(tfm, GFP_NOFS); if (!req) { printk_ratelimited(KERN_ERR - "%s: crypto_request_alloc() failed\n", __func__); - kfree(alloc_buf); + "%s: skcipher_request_alloc() failed\n", __func__); return -ENOMEM; } skcipher_request_set_callback(req, CRYPTO_TFM_REQ_MAY_BACKLOG | CRYPTO_TFM_REQ_MAY_SLEEP, fname_crypt_complete, &ecr); + sg_init_one(&sg, oname->name, cryptlen); + skcipher_request_set_crypt(req, &sg, &sg, cryptlen, iv); - /* Copy the input */ - memcpy(workbuf, iname->name, iname->len); - if (iname->len < ciphertext_len) - memset(workbuf + iname->len, 0, ciphertext_len - iname->len); - - /* Initialize IV */ - memset(iv, 0, FS_CRYPTO_BLOCK_SIZE); - - /* Create encryption request */ - sg_init_one(&src_sg, workbuf, ciphertext_len); - sg_init_one(&dst_sg, oname->name, ciphertext_len); - skcipher_request_set_crypt(req, &src_sg, &dst_sg, ciphertext_len, iv); + /* Do the encryption */ res = crypto_skcipher_encrypt(req); if (res == -EINPROGRESS || res == -EBUSY) { + /* Request is being completed asynchronously; wait for it */ wait_for_completion(&ecr.completion); res = ecr.res; } - kfree(alloc_buf); skcipher_request_free(req); if (res < 0) { printk_ratelimited(KERN_ERR @@ -105,7 +94,7 @@ static int fname_encrypt(struct inode *inode, return res; } - oname->len = ciphertext_len; + oname->len = cryptlen; return 0; } From 0f0909e242f73c1154272cf04f07fc9afe13e5b8 Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Sun, 13 Nov 2016 20:41:09 -0500 Subject: [PATCH 774/792] fscrypto: don't use on-stack buffer for key derivation With the new (in 4.9) option to use a virtually-mapped stack (CONFIG_VMAP_STACK), stack buffers cannot be used as input/output for the scatterlist crypto API because they may not be directly mappable to struct page. get_crypt_info() was using a stack buffer to hold the output from the encryption operation used to derive the per-file key. Fix it by using a heap buffer. This bug could most easily be observed in a CONFIG_DEBUG_SG kernel because this allowed the BUG in sg_set_buf() to be triggered. Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers Signed-off-by: Theodore Ts'o --- fs/crypto/keyinfo.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/fs/crypto/keyinfo.c b/fs/crypto/keyinfo.c index 82f0285f5d08..67fb6d8876d0 100644 --- a/fs/crypto/keyinfo.c +++ b/fs/crypto/keyinfo.c @@ -185,7 +185,7 @@ int get_crypt_info(struct inode *inode) struct crypto_skcipher *ctfm; const char *cipher_str; int keysize; - u8 raw_key[FS_MAX_KEY_SIZE]; + u8 *raw_key = NULL; int res; res = fscrypt_initialize(); @@ -238,6 +238,15 @@ retry: if (res) goto out; + /* + * This cannot be a stack buffer because it is passed to the scatterlist + * crypto API as part of key derivation. + */ + res = -ENOMEM; + raw_key = kmalloc(FS_MAX_KEY_SIZE, GFP_NOFS); + if (!raw_key) + goto out; + if (fscrypt_dummy_context_enabled(inode)) { memset(raw_key, 0x42, FS_AES_256_XTS_KEY_SIZE); goto got_key; @@ -276,7 +285,8 @@ got_key: if (res) goto out; - memzero_explicit(raw_key, sizeof(raw_key)); + kzfree(raw_key); + raw_key = NULL; if (cmpxchg(&inode->i_crypt_info, NULL, crypt_info) != NULL) { put_crypt_info(crypt_info); goto retry; @@ -287,7 +297,7 @@ out: if (res == -ENOKEY) res = 0; put_crypt_info(crypt_info); - memzero_explicit(raw_key, sizeof(raw_key)); + kzfree(raw_key); return res; } From 8cdf3372fe8368f56315e66bea9f35053c418093 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Fri, 18 Nov 2016 13:00:24 -0500 Subject: [PATCH 775/792] ext4: sanity check the block and cluster size at mount time If the block size or cluster size is insane, reject the mount. This is important for security reasons (although we shouldn't be just depending on this check). Ref: http://www.securityfocus.com/archive/1/539661 Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1332506 Reported-by: Borislav Petkov Reported-by: Nikolay Borisov Signed-off-by: Theodore Ts'o Cc: stable@vger.kernel.org --- fs/ext4/ext4.h | 1 + fs/ext4/super.c | 17 ++++++++++++++++- 2 files changed, 17 insertions(+), 1 deletion(-) diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index 282a51b07c57..a8a750f59621 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -235,6 +235,7 @@ struct ext4_io_submit { #define EXT4_MAX_BLOCK_SIZE 65536 #define EXT4_MIN_BLOCK_LOG_SIZE 10 #define EXT4_MAX_BLOCK_LOG_SIZE 16 +#define EXT4_MAX_CLUSTER_LOG_SIZE 30 #ifdef __KERNEL__ # define EXT4_BLOCK_SIZE(s) ((s)->s_blocksize) #else diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 20da99da0a34..52b0530c5d65 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -3565,7 +3565,15 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) if (blocksize < EXT4_MIN_BLOCK_SIZE || blocksize > EXT4_MAX_BLOCK_SIZE) { ext4_msg(sb, KERN_ERR, - "Unsupported filesystem blocksize %d", blocksize); + "Unsupported filesystem blocksize %d (%d log_block_size)", + blocksize, le32_to_cpu(es->s_log_block_size)); + goto failed_mount; + } + if (le32_to_cpu(es->s_log_block_size) > + (EXT4_MAX_BLOCK_LOG_SIZE - EXT4_MIN_BLOCK_LOG_SIZE)) { + ext4_msg(sb, KERN_ERR, + "Invalid log block size: %u", + le32_to_cpu(es->s_log_block_size)); goto failed_mount; } @@ -3697,6 +3705,13 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) "block size (%d)", clustersize, blocksize); goto failed_mount; } + if (le32_to_cpu(es->s_log_cluster_size) > + (EXT4_MAX_CLUSTER_LOG_SIZE - EXT4_MIN_BLOCK_LOG_SIZE)) { + ext4_msg(sb, KERN_ERR, + "Invalid log cluster size: %u", + le32_to_cpu(es->s_log_cluster_size)); + goto failed_mount; + } sbi->s_cluster_bits = le32_to_cpu(es->s_log_cluster_size) - le32_to_cpu(es->s_log_block_size); sbi->s_clusters_per_group = From 32c231164b762dddefa13af5a0101032c70b50ef Mon Sep 17 00:00:00 2001 From: Guillaume Nault Date: Fri, 18 Nov 2016 22:13:00 +0100 Subject: [PATCH 776/792] l2tp: fix racy SOCK_ZAPPED flag check in l2tp_ip{,6}_bind() Lock socket before checking the SOCK_ZAPPED flag in l2tp_ip6_bind(). Without lock, a concurrent call could modify the socket flags between the sock_flag(sk, SOCK_ZAPPED) test and the lock_sock() call. This way, a socket could be inserted twice in l2tp_ip6_bind_table. Releasing it would then leave a stale pointer there, generating use-after-free errors when walking through the list or modifying adjacent entries. BUG: KASAN: use-after-free in l2tp_ip6_close+0x22e/0x290 at addr ffff8800081b0ed8 Write of size 8 by task syz-executor/10987 CPU: 0 PID: 10987 Comm: syz-executor Not tainted 4.8.0+ #39 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014 ffff880031d97838 ffffffff829f835b ffff88001b5a1640 ffff8800081b0ec0 ffff8800081b15a0 ffff8800081b6d20 ffff880031d97860 ffffffff8174d3cc ffff880031d978f0 ffff8800081b0e80 ffff88001b5a1640 ffff880031d978e0 Call Trace: [] dump_stack+0xb3/0x118 lib/dump_stack.c:15 [] kasan_object_err+0x1c/0x70 mm/kasan/report.c:156 [< inline >] print_address_description mm/kasan/report.c:194 [] kasan_report_error+0x1f6/0x4d0 mm/kasan/report.c:283 [< inline >] kasan_report mm/kasan/report.c:303 [] __asan_report_store8_noabort+0x3e/0x40 mm/kasan/report.c:329 [< inline >] __write_once_size ./include/linux/compiler.h:249 [< inline >] __hlist_del ./include/linux/list.h:622 [< inline >] hlist_del_init ./include/linux/list.h:637 [] l2tp_ip6_close+0x22e/0x290 net/l2tp/l2tp_ip6.c:239 [] inet_release+0xed/0x1c0 net/ipv4/af_inet.c:415 [] inet6_release+0x50/0x70 net/ipv6/af_inet6.c:422 [] sock_release+0x8d/0x1d0 net/socket.c:570 [] sock_close+0x16/0x20 net/socket.c:1017 [] __fput+0x28c/0x780 fs/file_table.c:208 [] ____fput+0x15/0x20 fs/file_table.c:244 [] task_work_run+0xf9/0x170 [] do_exit+0x85e/0x2a00 [] do_group_exit+0x108/0x330 [] get_signal+0x617/0x17a0 kernel/signal.c:2307 [] do_signal+0x7f/0x18f0 [] exit_to_usermode_loop+0xbf/0x150 arch/x86/entry/common.c:156 [< inline >] prepare_exit_to_usermode arch/x86/entry/common.c:190 [] syscall_return_slowpath+0x1a0/0x1e0 arch/x86/entry/common.c:259 [] entry_SYSCALL_64_fastpath+0xc4/0xc6 Object at ffff8800081b0ec0, in cache L2TP/IPv6 size: 1448 Allocated: PID = 10987 [ 1116.897025] [] save_stack_trace+0x16/0x20 [ 1116.897025] [] save_stack+0x46/0xd0 [ 1116.897025] [] kasan_kmalloc+0xad/0xe0 [ 1116.897025] [] kasan_slab_alloc+0x12/0x20 [ 1116.897025] [< inline >] slab_post_alloc_hook mm/slab.h:417 [ 1116.897025] [< inline >] slab_alloc_node mm/slub.c:2708 [ 1116.897025] [< inline >] slab_alloc mm/slub.c:2716 [ 1116.897025] [] kmem_cache_alloc+0xc8/0x2b0 mm/slub.c:2721 [ 1116.897025] [] sk_prot_alloc+0x69/0x2b0 net/core/sock.c:1326 [ 1116.897025] [] sk_alloc+0x38/0xae0 net/core/sock.c:1388 [ 1116.897025] [] inet6_create+0x2d7/0x1000 net/ipv6/af_inet6.c:182 [ 1116.897025] [] __sock_create+0x37b/0x640 net/socket.c:1153 [ 1116.897025] [< inline >] sock_create net/socket.c:1193 [ 1116.897025] [< inline >] SYSC_socket net/socket.c:1223 [ 1116.897025] [] SyS_socket+0xef/0x1b0 net/socket.c:1203 [ 1116.897025] [] entry_SYSCALL_64_fastpath+0x23/0xc6 Freed: PID = 10987 [ 1116.897025] [] save_stack_trace+0x16/0x20 [ 1116.897025] [] save_stack+0x46/0xd0 [ 1116.897025] [] kasan_slab_free+0x71/0xb0 [ 1116.897025] [< inline >] slab_free_hook mm/slub.c:1352 [ 1116.897025] [< inline >] slab_free_freelist_hook mm/slub.c:1374 [ 1116.897025] [< inline >] slab_free mm/slub.c:2951 [ 1116.897025] [] kmem_cache_free+0xc8/0x330 mm/slub.c:2973 [ 1116.897025] [< inline >] sk_prot_free net/core/sock.c:1369 [ 1116.897025] [] __sk_destruct+0x32b/0x4f0 net/core/sock.c:1444 [ 1116.897025] [] sk_destruct+0x44/0x80 net/core/sock.c:1452 [ 1116.897025] [] __sk_free+0x53/0x220 net/core/sock.c:1460 [ 1116.897025] [] sk_free+0x23/0x30 net/core/sock.c:1471 [ 1116.897025] [] sk_common_release+0x28c/0x3e0 ./include/net/sock.h:1589 [ 1116.897025] [] l2tp_ip6_close+0x1fe/0x290 net/l2tp/l2tp_ip6.c:243 [ 1116.897025] [] inet_release+0xed/0x1c0 net/ipv4/af_inet.c:415 [ 1116.897025] [] inet6_release+0x50/0x70 net/ipv6/af_inet6.c:422 [ 1116.897025] [] sock_release+0x8d/0x1d0 net/socket.c:570 [ 1116.897025] [] sock_close+0x16/0x20 net/socket.c:1017 [ 1116.897025] [] __fput+0x28c/0x780 fs/file_table.c:208 [ 1116.897025] [] ____fput+0x15/0x20 fs/file_table.c:244 [ 1116.897025] [] task_work_run+0xf9/0x170 [ 1116.897025] [] do_exit+0x85e/0x2a00 [ 1116.897025] [] do_group_exit+0x108/0x330 [ 1116.897025] [] get_signal+0x617/0x17a0 kernel/signal.c:2307 [ 1116.897025] [] do_signal+0x7f/0x18f0 [ 1116.897025] [] exit_to_usermode_loop+0xbf/0x150 arch/x86/entry/common.c:156 [ 1116.897025] [< inline >] prepare_exit_to_usermode arch/x86/entry/common.c:190 [ 1116.897025] [] syscall_return_slowpath+0x1a0/0x1e0 arch/x86/entry/common.c:259 [ 1116.897025] [] entry_SYSCALL_64_fastpath+0xc4/0xc6 Memory state around the buggy address: ffff8800081b0d80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8800081b0e00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff8800081b0e80: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb ^ ffff8800081b0f00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8800081b0f80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== The same issue exists with l2tp_ip_bind() and l2tp_ip_bind_table. Fixes: c51ce49735c1 ("l2tp: fix oops in L2TP IP sockets for connect() AF_UNSPEC case") Reported-by: Baozeng Ding Reported-by: Andrey Konovalov Tested-by: Baozeng Ding Signed-off-by: Guillaume Nault Signed-off-by: David S. Miller --- net/l2tp/l2tp_ip.c | 5 +++-- net/l2tp/l2tp_ip6.c | 5 +++-- 2 files changed, 6 insertions(+), 4 deletions(-) diff --git a/net/l2tp/l2tp_ip.c b/net/l2tp/l2tp_ip.c index fce25afb652a..982f6c44ea01 100644 --- a/net/l2tp/l2tp_ip.c +++ b/net/l2tp/l2tp_ip.c @@ -251,8 +251,6 @@ static int l2tp_ip_bind(struct sock *sk, struct sockaddr *uaddr, int addr_len) int ret; int chk_addr_ret; - if (!sock_flag(sk, SOCK_ZAPPED)) - return -EINVAL; if (addr_len < sizeof(struct sockaddr_l2tpip)) return -EINVAL; if (addr->l2tp_family != AF_INET) @@ -267,6 +265,9 @@ static int l2tp_ip_bind(struct sock *sk, struct sockaddr *uaddr, int addr_len) read_unlock_bh(&l2tp_ip_lock); lock_sock(sk); + if (!sock_flag(sk, SOCK_ZAPPED)) + goto out; + if (sk->sk_state != TCP_CLOSE || addr_len < sizeof(struct sockaddr_l2tpip)) goto out; diff --git a/net/l2tp/l2tp_ip6.c b/net/l2tp/l2tp_ip6.c index ad3468c32b53..9978d01ba0ba 100644 --- a/net/l2tp/l2tp_ip6.c +++ b/net/l2tp/l2tp_ip6.c @@ -269,8 +269,6 @@ static int l2tp_ip6_bind(struct sock *sk, struct sockaddr *uaddr, int addr_len) int addr_type; int err; - if (!sock_flag(sk, SOCK_ZAPPED)) - return -EINVAL; if (addr->l2tp_family != AF_INET6) return -EINVAL; if (addr_len < sizeof(*addr)) @@ -296,6 +294,9 @@ static int l2tp_ip6_bind(struct sock *sk, struct sockaddr *uaddr, int addr_len) lock_sock(sk); err = -EINVAL; + if (!sock_flag(sk, SOCK_ZAPPED)) + goto out_unlock; + if (sk->sk_state != TCP_CLOSE) goto out_unlock; From 3f0ae05d6fea0ed5b19efdbc9c9f8e02685a3af3 Mon Sep 17 00:00:00 2001 From: Zhang Shengju Date: Sat, 19 Nov 2016 23:28:32 +0800 Subject: [PATCH 777/792] rtnl: fix the loop index update error in rtnl_dump_ifinfo() If the link is filtered out, loop index should also be updated. If not, loop index will not be correct. Fixes: dc599f76c22b0 ("net: Add support for filtering link dump by master device and kind") Signed-off-by: Zhang Shengju Acked-by: David Ahern Signed-off-by: David S. Miller --- net/core/rtnetlink.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c index 2b9d7d08ed4d..a99917b5de33 100644 --- a/net/core/rtnetlink.c +++ b/net/core/rtnetlink.c @@ -1609,7 +1609,7 @@ static int rtnl_dump_ifinfo(struct sk_buff *skb, struct netlink_callback *cb) head = &net->dev_index_head[h]; hlist_for_each_entry(dev, head, index_hlist) { if (link_dump_filtered(dev, master_idx, kind_ops)) - continue; + goto cont; if (idx < s_idx) goto cont; err = rtnl_fill_ifinfo(skb, dev, RTM_NEWLINK, From 51b9a31c42edcd089f5b229633477ab5128faf03 Mon Sep 17 00:00:00 2001 From: Jon Paul Maloy Date: Sat, 19 Nov 2016 14:47:07 -0500 Subject: [PATCH 778/792] tipc: eliminate obsolete socket locking policy description The comment block in socket.c describing the locking policy is obsolete, and does not reflect current reality. We remove it in this commit. Since the current locking policy is much simpler and follows a mainstream approach, we see no need to add a new description. Signed-off-by: Jon Maloy Signed-off-by: David S. Miller --- net/tipc/socket.c | 48 +---------------------------------------------- 1 file changed, 1 insertion(+), 47 deletions(-) diff --git a/net/tipc/socket.c b/net/tipc/socket.c index f9f5f3c3dab5..db32777ab591 100644 --- a/net/tipc/socket.c +++ b/net/tipc/socket.c @@ -1,7 +1,7 @@ /* * net/tipc/socket.c: TIPC socket API * - * Copyright (c) 2001-2007, 2012-2015, Ericsson AB + * Copyright (c) 2001-2007, 2012-2016, Ericsson AB * Copyright (c) 2004-2008, 2010-2013, Wind River Systems * All rights reserved. * @@ -129,54 +129,8 @@ static const struct proto_ops packet_ops; static const struct proto_ops stream_ops; static const struct proto_ops msg_ops; static struct proto tipc_proto; - static const struct rhashtable_params tsk_rht_params; -/* - * Revised TIPC socket locking policy: - * - * Most socket operations take the standard socket lock when they start - * and hold it until they finish (or until they need to sleep). Acquiring - * this lock grants the owner exclusive access to the fields of the socket - * data structures, with the exception of the backlog queue. A few socket - * operations can be done without taking the socket lock because they only - * read socket information that never changes during the life of the socket. - * - * Socket operations may acquire the lock for the associated TIPC port if they - * need to perform an operation on the port. If any routine needs to acquire - * both the socket lock and the port lock it must take the socket lock first - * to avoid the risk of deadlock. - * - * The dispatcher handling incoming messages cannot grab the socket lock in - * the standard fashion, since invoked it runs at the BH level and cannot block. - * Instead, it checks to see if the socket lock is currently owned by someone, - * and either handles the message itself or adds it to the socket's backlog - * queue; in the latter case the queued message is processed once the process - * owning the socket lock releases it. - * - * NOTE: Releasing the socket lock while an operation is sleeping overcomes - * the problem of a blocked socket operation preventing any other operations - * from occurring. However, applications must be careful if they have - * multiple threads trying to send (or receive) on the same socket, as these - * operations might interfere with each other. For example, doing a connect - * and a receive at the same time might allow the receive to consume the - * ACK message meant for the connect. While additional work could be done - * to try and overcome this, it doesn't seem to be worthwhile at the present. - * - * NOTE: Releasing the socket lock while an operation is sleeping also ensures - * that another operation that must be performed in a non-blocking manner is - * not delayed for very long because the lock has already been taken. - * - * NOTE: This code assumes that certain fields of a port/socket pair are - * constant over its lifetime; such fields can be examined without taking - * the socket lock and/or port lock, and do not need to be re-read even - * after resuming processing after waiting. These fields include: - * - socket type - * - pointer to socket sk structure (aka tipc_sock structure) - * - pointer to port structure - * - port reference - */ - static u32 tsk_own_node(struct tipc_sock *tsk) { return msg_prevnode(&tsk->phdr); From 9c763584b7c8911106bb77af7e648bef09af9d80 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 20 Nov 2016 13:52:19 -0800 Subject: [PATCH 779/792] Linux 4.9-rc6 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 9bc877d073d7..0ede48ba5aaf 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 4 PATCHLEVEL = 9 SUBLEVEL = 0 -EXTRAVERSION = -rc5 +EXTRAVERSION = -rc6 NAME = Psychotic Stoned Sheep # *DOCUMENTATION* From 3d40658c977769ce2138f286cf131537bf68bdfe Mon Sep 17 00:00:00 2001 From: John Johansen Date: Wed, 31 Aug 2016 21:10:06 -0700 Subject: [PATCH 780/792] apparmor: fix change_hat not finding hat after policy replacement After a policy replacement, the task cred may be out of date and need to be updated. However change_hat is using the stale profiles from the out of date cred resulting in either: a stale profile being applied or, incorrect failure when searching for a hat profile as it has been migrated to the new parent profile. Fixes: 01e2b670aa898a39259bc85c78e3d74820f4d3b6 (failure to find hat) Fixes: 898127c34ec03291c86f4ff3856d79e9e18952bc (stale policy being applied) Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1000287 Cc: stable@vger.kernel.org Signed-off-by: John Johansen Signed-off-by: James Morris --- security/apparmor/domain.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/security/apparmor/domain.c b/security/apparmor/domain.c index fc3036b34e51..a4d90aa1045a 100644 --- a/security/apparmor/domain.c +++ b/security/apparmor/domain.c @@ -621,8 +621,8 @@ int aa_change_hat(const char *hats[], int count, u64 token, bool permtest) /* released below */ cred = get_current_cred(); cxt = cred_cxt(cred); - profile = aa_cred_profile(cred); - previous_profile = cxt->previous; + profile = aa_get_newest_profile(aa_cred_profile(cred)); + previous_profile = aa_get_newest_profile(cxt->previous); if (unconfined(profile)) { info = "unconfined"; @@ -718,6 +718,8 @@ audit: out: aa_put_profile(hat); kfree(name); + aa_put_profile(profile); + aa_put_profile(previous_profile); put_cred(cred); return error; From fc0e81b2bea0ebceb71889b61d2240856141c9ee Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Sat, 19 Nov 2016 18:42:40 -0800 Subject: [PATCH 781/792] x86/traps: Ignore high word of regs->cs in early_fixup_exception() On the 80486 DX, it seems that some exceptions may leave garbage in the high bits of CS. This causes sporadic failures in which early_fixup_exception() refuses to fix up an exception. As far as I can tell, this has been buggy for a long time, but the problem seems to have been exacerbated by commits: 1e02ce4cccdc ("x86: Store a per-cpu shadow copy of CR4") e1bfc11c5a6f ("x86/init: Fix cr4_init_shadow() on CR4-less machines") This appears to have broken for as long as we've had early exception handling. [ Note to stable maintainers: This patch is needed all the way back to 3.4, but it will only apply to 4.6 and up, as it depends on commit: 0e861fbb5bda ("x86/head: Move early exception panic code into early_fixup_exception()") If you want to backport to kernels before 4.6, please don't backport the prerequisites (there was a big chain of them that rewrote a lot of the early exception machinery); instead, ask me and I can send you a one-liner that will apply. ] Reported-by: Matthew Whitehead Signed-off-by: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Josh Poimboeuf Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: stable@vger.kernel.org Fixes: 4c5023a3fa2e ("x86-32: Handle exception table entries during early boot") Link: http://lkml.kernel.org/r/cb32c69920e58a1a58e7b5cad975038a69c0ce7d.1479609510.git.luto@kernel.org Signed-off-by: Ingo Molnar --- arch/x86/mm/extable.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/x86/mm/extable.c b/arch/x86/mm/extable.c index 79ae939970d3..fcd06f7526de 100644 --- a/arch/x86/mm/extable.c +++ b/arch/x86/mm/extable.c @@ -135,7 +135,12 @@ void __init early_fixup_exception(struct pt_regs *regs, int trapnr) if (early_recursion_flag > 2) goto halt_loop; - if (regs->cs != __KERNEL_CS) + /* + * Old CPUs leave the high bits of CS on the stack + * undefined. I'm not sure which CPUs do this, but at least + * the 486 DX works this way. + */ + if ((regs->cs & 0xFFFF) != __KERNEL_CS) goto fail; /* From ed68d7e9b9cfb64f3045ffbcb108df03c09a0f98 Mon Sep 17 00:00:00 2001 From: Andy Lutomirski Date: Sat, 19 Nov 2016 15:37:30 -0800 Subject: [PATCH 782/792] x86/boot: Fail the boot if !M486 and CPUID is missing Linux will have all kinds of sporadic problems on systems that don't have the CPUID instruction unless CONFIG_M486=y. In particular, sync_core() will explode. I believe that these kernels had a better chance of working before commit 05fb3c199bb0 ("x86/boot: Initialize FPU and X86_FEATURE_ALWAYS even if we don't have CPUID"). That commit inadvertently fixed a serious bug: we used to fail to detect the FPU if CPUID wasn't present. Because we also used to forget to set X86_FEATURE_ALWAYS, we end up with no cpu feature bits set at all. This meant that alternative patching didn't do anything and, if paravirt was disabled, we could plausibly finish the entire boot process without calling sync_core(). Rather than trying to work around these issues, just have the kernel fail loudly if it's running on a CPUID-less 486, doesn't have CPUID, and doesn't have CONFIG_M486 set. Reported-by: Matthew Whitehead Signed-off-by: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Josh Poimboeuf Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/70eac6639f23df8be5fe03fa1984aedd5d40077a.1479598603.git.luto@kernel.org Signed-off-by: Ingo Molnar --- arch/x86/boot/cpu.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/x86/boot/cpu.c b/arch/x86/boot/cpu.c index 26240dde081e..4224ede43b4e 100644 --- a/arch/x86/boot/cpu.c +++ b/arch/x86/boot/cpu.c @@ -87,6 +87,12 @@ int validate_cpu(void) return -1; } + if (CONFIG_X86_MINIMUM_CPU_FAMILY <= 4 && !IS_ENABLED(CONFIG_M486) && + !has_eflag(X86_EFLAGS_ID)) { + printf("This kernel requires a CPU with the CPUID instruction. Build with CONFIG_M486=y to run on this CPU.\n"); + return -1; + } + if (err_flags) { puts("This kernel requires the following features " "not present on the CPU:\n"); From b22cbe404a9cc3c7949e380fa1861e31934c8978 Mon Sep 17 00:00:00 2001 From: Yu-cheng Yu Date: Thu, 17 Nov 2016 09:11:35 -0800 Subject: [PATCH 783/792] x86/fpu: Fix invalid FPU ptrace state after execve() Robert O'Callahan reported that after an execve PTRACE_GETREGSET NT_X86_XSTATE continues to return the pre-exec register values until the exec'ed task modifies FPU state. The test code is at: https://bugzilla.redhat.com/attachment.cgi?id=1164286. What is happening is fpu__clear() does not properly clear fpstate. Fix it by doing just that. Reported-by: Robert O'Callahan Signed-off-by: Yu-cheng Yu Cc: Cc: Andy Lutomirski Cc: Borislav Petkov Cc: David Hansen Cc: Fenghua Yu Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Ravi V. Shankar Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1479402695-6553-1-git-send-email-yu-cheng.yu@intel.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/fpu/core.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/x86/kernel/fpu/core.c b/arch/x86/kernel/fpu/core.c index 47004010ad5d..ebb4e95fbd74 100644 --- a/arch/x86/kernel/fpu/core.c +++ b/arch/x86/kernel/fpu/core.c @@ -521,14 +521,14 @@ void fpu__clear(struct fpu *fpu) { WARN_ON_FPU(fpu != ¤t->thread.fpu); /* Almost certainly an anomaly */ - if (!use_eager_fpu() || !static_cpu_has(X86_FEATURE_FPU)) { - /* FPU state will be reallocated lazily at the first use. */ - fpu__drop(fpu); - } else { - if (!fpu->fpstate_active) { - fpu__activate_curr(fpu); - user_fpu_begin(); - } + fpu__drop(fpu); + + /* + * Make sure fpstate is cleared and initialized. + */ + if (static_cpu_has(X86_FEATURE_FPU)) { + fpu__activate_curr(fpu); + user_fpu_begin(); copy_init_fpstate_to_fpregs(); } } From 8c5c86fb6abec7d76ec4d51a46714161bceab315 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 18 Nov 2016 18:52:24 +0200 Subject: [PATCH 784/792] x86/platform/intel-mid: Register watchdog device after SCU Watchdog device in Intel Tangier relies on SCU to be present. It uses the SCU IPC channel to send commands and receive responses. If watchdog driver is initialized quite before SCU and a command has been sent the result is always an error like the following: intel_mid_wdt: Error stopping watchdog: 0xffffffed Register watchdog device whne SCU is ready to avoid described issue. Signed-off-by: Andy Shevchenko Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/20161118165224.175514-1-andriy.shevchenko@linux.intel.com [ Small cleanups. ] Signed-off-by: Ingo Molnar --- .../intel-mid/device_libs/platform_wdt.c | 32 ++++++++++++++++--- 1 file changed, 27 insertions(+), 5 deletions(-) diff --git a/arch/x86/platform/intel-mid/device_libs/platform_wdt.c b/arch/x86/platform/intel-mid/device_libs/platform_wdt.c index de734134bc8d..4f96cd009962 100644 --- a/arch/x86/platform/intel-mid/device_libs/platform_wdt.c +++ b/arch/x86/platform/intel-mid/device_libs/platform_wdt.c @@ -14,7 +14,9 @@ #include #include #include + #include +#include #include #define TANGIER_EXT_TIMER0_MSI 15 @@ -50,14 +52,34 @@ static struct intel_mid_wdt_pdata tangier_pdata = { .probe = tangier_probe, }; -static int __init register_mid_wdt(void) +static int wdt_scu_status_change(struct notifier_block *nb, + unsigned long code, void *data) { - if (intel_mid_identify_cpu() == INTEL_MID_CPU_CHIP_TANGIER) { - wdt_dev.dev.platform_data = &tangier_pdata; - return platform_device_register(&wdt_dev); + if (code == SCU_DOWN) { + platform_device_unregister(&wdt_dev); + return 0; } - return -ENODEV; + return platform_device_register(&wdt_dev); } +static struct notifier_block wdt_scu_notifier = { + .notifier_call = wdt_scu_status_change, +}; + +static int __init register_mid_wdt(void) +{ + if (intel_mid_identify_cpu() != INTEL_MID_CPU_CHIP_TANGIER) + return -ENODEV; + + wdt_dev.dev.platform_data = &tangier_pdata; + + /* + * We need to be sure that the SCU IPC is ready before watchdog device + * can be registered: + */ + intel_scu_notifier_add(&wdt_scu_notifier); + + return 0; +} rootfs_initcall(register_mid_wdt); From a980ce352fcd408d30b044455e5f6e959d6258b6 Mon Sep 17 00:00:00 2001 From: "H.J. Lu" Date: Fri, 18 Nov 2016 13:07:19 -0800 Subject: [PATCH 785/792] x86/build: Build compressed x86 kernels as PIE when !CONFIG_RELOCATABLE as well Since the bootloader may load the compressed x86 kernel at any address, it should always be built as PIE, not just when CONFIG_RELOCATABLE=y. Otherwise, linker in binutils 2.27 will optimize GOT load into the absolute address when building the compressed x86 kernel as a non-PIE executable. Signed-off-by: H.J. Lu Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Josh Poimboeuf Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-kernel@vger.kernel.org [ Small wording changes. ] Signed-off-by: Ingo Molnar --- arch/x86/boot/compressed/Makefile | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile index 536ccfcc01c6..34d9e15857c3 100644 --- a/arch/x86/boot/compressed/Makefile +++ b/arch/x86/boot/compressed/Makefile @@ -40,8 +40,8 @@ GCOV_PROFILE := n UBSAN_SANITIZE :=n LDFLAGS := -m elf_$(UTS_MACHINE) -ifeq ($(CONFIG_RELOCATABLE),y) -# If kernel is relocatable, build compressed kernel as PIE. +# Compressed kernel should be built as PIE since it may be loaded at any +# address by the bootloader. ifeq ($(CONFIG_X86_32),y) LDFLAGS += $(call ld-option, -pie) $(call ld-option, --no-dynamic-linker) else @@ -51,7 +51,6 @@ else LDFLAGS += $(shell $(LD) --help 2>&1 | grep -q "\-z noreloc-overflow" \ && echo "-z noreloc-overflow -pie --no-dynamic-linker") endif -endif LDFLAGS_vmlinux := -T hostprogs-y := mkpiggy From e5dce2868818ca8706924f7bdc7939d481eefab0 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 18 Nov 2016 19:27:23 +0200 Subject: [PATCH 786/792] x86/platform/intel-mid: Rename platform_wdt to platform_mrfld_wdt Rename the watchdog platform library file to explicitly show that is used only on Intel Merrifield platforms. Signed-off-by: Andy Shevchenko Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/20161118172723.179761-1-andriy.shevchenko@linux.intel.com Signed-off-by: Ingo Molnar --- arch/x86/platform/intel-mid/device_libs/Makefile | 2 +- .../device_libs/{platform_wdt.c => platform_mrfld_wdt.c} | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) rename arch/x86/platform/intel-mid/device_libs/{platform_wdt.c => platform_mrfld_wdt.c} (97%) diff --git a/arch/x86/platform/intel-mid/device_libs/Makefile b/arch/x86/platform/intel-mid/device_libs/Makefile index 429d08be7848..dd6cfa4ad3ac 100644 --- a/arch/x86/platform/intel-mid/device_libs/Makefile +++ b/arch/x86/platform/intel-mid/device_libs/Makefile @@ -28,4 +28,4 @@ obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_pcal9555a.o obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_tca6416.o # MISC Devices obj-$(subst m,y,$(CONFIG_KEYBOARD_GPIO)) += platform_gpio_keys.o -obj-$(subst m,y,$(CONFIG_INTEL_MID_WATCHDOG)) += platform_wdt.o +obj-$(subst m,y,$(CONFIG_INTEL_MID_WATCHDOG)) += platform_mrfld_wdt.o diff --git a/arch/x86/platform/intel-mid/device_libs/platform_wdt.c b/arch/x86/platform/intel-mid/device_libs/platform_mrfld_wdt.c similarity index 97% rename from arch/x86/platform/intel-mid/device_libs/platform_wdt.c rename to arch/x86/platform/intel-mid/device_libs/platform_mrfld_wdt.c index 4f96cd009962..3f1f1c77d090 100644 --- a/arch/x86/platform/intel-mid/device_libs/platform_wdt.c +++ b/arch/x86/platform/intel-mid/device_libs/platform_mrfld_wdt.c @@ -1,5 +1,5 @@ /* - * platform_wdt.c: Watchdog platform library file + * Intel Merrifield watchdog platform device library file * * (C) Copyright 2014 Intel Corporation * Author: David Cohen From ec638db8cb9ddd5ca08b23f2835b6c9c15eb616d Mon Sep 17 00:00:00 2001 From: Jacob Pan Date: Mon, 14 Nov 2016 11:08:45 -0800 Subject: [PATCH 787/792] thermal/powerclamp: add back module device table Commit 3105f234e0aba43e44e277c20f9b32ee8add43d4 replaced module cpu id table with a cpu feature check, which is logically correct. But we need the module device table to allow module auto loading. Cc: stable@vger.kernel.org # 4.8 Fixes:3105f234 thermal/powerclamp: correct cpu support check Signed-off-by: Jacob Pan Signed-off-by: Zhang Rui --- drivers/thermal/intel_powerclamp.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/thermal/intel_powerclamp.c b/drivers/thermal/intel_powerclamp.c index 7a223074df3d..afada655f861 100644 --- a/drivers/thermal/intel_powerclamp.c +++ b/drivers/thermal/intel_powerclamp.c @@ -669,9 +669,16 @@ static struct thermal_cooling_device_ops powerclamp_cooling_ops = { .set_cur_state = powerclamp_set_cur_state, }; +static const struct x86_cpu_id __initconst intel_powerclamp_ids[] = { + { X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_MWAIT }, + {} +}; +MODULE_DEVICE_TABLE(x86cpu, intel_powerclamp_ids); + static int __init powerclamp_probe(void) { - if (!boot_cpu_has(X86_FEATURE_MWAIT)) { + + if (!x86_match_cpu(intel_powerclamp_ids)) { pr_err("CPU does not support MWAIT"); return -ENODEV; } From 6bc5445c0180a0c7cc61a95d131c7eac66459692 Mon Sep 17 00:00:00 2001 From: Peter Robinson Date: Sun, 20 Nov 2016 17:22:38 +0000 Subject: [PATCH 788/792] ethernet: stmmac: make DWMAC_STM32 depend on it's associated SoC There's not much point, except compile test, enabling the stmmac platform drivers unless the STM32 SoC is enabled. It's not useful without it. Signed-off-by: Peter Robinson Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig index 3818c5e06eba..4b78168a5f3c 100644 --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig @@ -107,7 +107,7 @@ config DWMAC_STI config DWMAC_STM32 tristate "STM32 DWMAC support" default ARCH_STM32 - depends on OF && HAS_IOMEM + depends on OF && HAS_IOMEM && (ARCH_STM32 || COMPILE_TEST) select MFD_SYSCON ---help--- Support for ethernet controller on STM32 SOCs. From 7c6ae610a1f0a9d3cebf790e0245b4e0f76aa86e Mon Sep 17 00:00:00 2001 From: Gao Feng Date: Mon, 21 Nov 2016 08:56:21 +0800 Subject: [PATCH 789/792] net: l2tp: Treat NET_XMIT_CN as success in l2tp_eth_dev_xmit The tc could return NET_XMIT_CN as one congestion notification, but it does not mean the packe is lost. Other modules like ipvlan, macvlan, and others treat NET_XMIT_CN as success too. So l2tp_eth_dev_xmit should add the NET_XMIT_CN check. Signed-off-by: Gao Feng Signed-off-by: David S. Miller --- net/l2tp/l2tp_eth.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/l2tp/l2tp_eth.c b/net/l2tp/l2tp_eth.c index 965f7e344cef..3dc97b4f982b 100644 --- a/net/l2tp/l2tp_eth.c +++ b/net/l2tp/l2tp_eth.c @@ -97,7 +97,7 @@ static int l2tp_eth_dev_xmit(struct sk_buff *skb, struct net_device *dev) unsigned int len = skb->len; int ret = l2tp_xmit_skb(session, skb, session->hdr_len); - if (likely(ret == NET_XMIT_SUCCESS)) { + if (likely(ret == NET_XMIT_SUCCESS || ret == NET_XMIT_CN)) { atomic_long_add(len, &priv->tx_bytes); atomic_long_inc(&priv->tx_packets); } else { From 7082c5c3f2407c52022507ffaf644dbbab97a883 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Mon, 21 Nov 2016 10:08:37 +0100 Subject: [PATCH 790/792] tcp: zero ca_priv area when switching cc algorithms We need to zero out the private data area when application switches connection to different algorithm (TCP_CONGESTION setsockopt). When congestion ops get assigned at connect time everything is already zeroed because sk_alloc uses GFP_ZERO flag. But in the setsockopt case this contains whatever previous cc placed there. Signed-off-by: Florian Westphal Signed-off-by: David S. Miller --- net/ipv4/tcp_cong.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/ipv4/tcp_cong.c b/net/ipv4/tcp_cong.c index 1294af4e0127..f9038d6b109e 100644 --- a/net/ipv4/tcp_cong.c +++ b/net/ipv4/tcp_cong.c @@ -200,8 +200,10 @@ static void tcp_reinit_congestion_control(struct sock *sk, icsk->icsk_ca_ops = ca; icsk->icsk_ca_setsockopt = 1; - if (sk->sk_state != TCP_CLOSE) + if (sk->sk_state != TCP_CLOSE) { + memset(icsk->icsk_ca_priv, 0, sizeof(icsk->icsk_ca_priv)); tcp_init_congestion_control(sk); + } } /* Manage refcounts on socket close. */ From 18f649ef344127ef6de23a5a4272dbe2fdb73dde Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Mon, 14 Nov 2016 19:46:09 +0100 Subject: [PATCH 791/792] sched/autogroup: Fix autogroup_move_group() to never skip sched_move_task() The PF_EXITING check in task_wants_autogroup() is no longer needed. Remove it, but see the next patch. However the comment is correct in that autogroup_move_group() must always change task_group() for every thread so the sysctl_ check is very wrong; we can race with cgroups and even sys_setsid() is not safe because a task running with task_group() == ag->tg must participate in refcounting: int main(void) { int sctl = open("/proc/sys/kernel/sched_autogroup_enabled", O_WRONLY); assert(sctl > 0); if (fork()) { wait(NULL); // destroy the child's ag/tg pause(); } assert(pwrite(sctl, "1\n", 2, 0) == 2); assert(setsid() > 0); if (fork()) pause(); kill(getppid(), SIGKILL); sleep(1); // The child has gone, the grandchild runs with kref == 1 assert(pwrite(sctl, "0\n", 2, 0) == 2); assert(setsid() > 0); // runs with the freed ag/tg for (;;) sleep(1); return 0; } crashes the kernel. It doesn't really need sleep(1), it doesn't matter if autogroup_move_group() actually frees the task_group or this happens later. Reported-by: Vern Lovejoy Signed-off-by: Oleg Nesterov Signed-off-by: Peter Zijlstra (Intel) Cc: Linus Torvalds Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: hartsjc@redhat.com Cc: vbendel@redhat.com Link: http://lkml.kernel.org/r/20161114184609.GA15965@redhat.com Signed-off-by: Ingo Molnar --- kernel/sched/auto_group.c | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-) diff --git a/kernel/sched/auto_group.c b/kernel/sched/auto_group.c index a5d966cb8891..ad2b19ad6ca0 100644 --- a/kernel/sched/auto_group.c +++ b/kernel/sched/auto_group.c @@ -111,14 +111,11 @@ bool task_wants_autogroup(struct task_struct *p, struct task_group *tg) { if (tg != &root_task_group) return false; - /* - * We can only assume the task group can't go away on us if - * autogroup_move_group() can see us on ->thread_group list. + * If we race with autogroup_move_group() the caller can use the old + * value of signal->autogroup but in this case sched_move_task() will + * be called again before autogroup_kref_put(). */ - if (p->flags & PF_EXITING) - return false; - return true; } @@ -138,13 +135,17 @@ autogroup_move_group(struct task_struct *p, struct autogroup *ag) } p->signal->autogroup = autogroup_kref_get(ag); - - if (!READ_ONCE(sysctl_sched_autogroup_enabled)) - goto out; - + /* + * We can't avoid sched_move_task() after we changed signal->autogroup, + * this process can already run with task_group() == prev->tg or we can + * race with cgroup code which can read autogroup = prev under rq->lock. + * In the latter case for_each_thread() can not miss a migrating thread, + * cpu_cgroup_attach() must not be possible after cgroup_exit() and it + * can't be removed from thread list, we hold ->siglock. + */ for_each_thread(p, t) sched_move_task(t); -out: + unlock_task_sighand(p, &flags); autogroup_kref_put(prev); } From 8e5bfa8c1f8471aa4a2d30be631ef2b50e10abaf Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Mon, 14 Nov 2016 19:46:12 +0100 Subject: [PATCH 792/792] sched/autogroup: Do not use autogroup->tg in zombie threads Exactly because for_each_thread() in autogroup_move_group() can't see it and update its ->sched_task_group before _put() and possibly free(). So the exiting task needs another sched_move_task() before exit_notify() and we need to re-introduce the PF_EXITING (or similar) check removed by the previous change for another reason. Signed-off-by: Oleg Nesterov Signed-off-by: Peter Zijlstra (Intel) Cc: Linus Torvalds Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: hartsjc@redhat.com Cc: vbendel@redhat.com Cc: vlovejoy@redhat.com Link: http://lkml.kernel.org/r/20161114184612.GA15968@redhat.com Signed-off-by: Ingo Molnar --- include/linux/sched.h | 2 ++ kernel/exit.c | 1 + kernel/sched/auto_group.c | 19 +++++++++++++++++++ 3 files changed, 22 insertions(+) diff --git a/include/linux/sched.h b/include/linux/sched.h index 348f51b0ec92..e9c009dc3a4a 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -2567,6 +2567,7 @@ extern void sched_autogroup_create_attach(struct task_struct *p); extern void sched_autogroup_detach(struct task_struct *p); extern void sched_autogroup_fork(struct signal_struct *sig); extern void sched_autogroup_exit(struct signal_struct *sig); +extern void sched_autogroup_exit_task(struct task_struct *p); #ifdef CONFIG_PROC_FS extern void proc_sched_autogroup_show_task(struct task_struct *p, struct seq_file *m); extern int proc_sched_autogroup_set_nice(struct task_struct *p, int nice); @@ -2576,6 +2577,7 @@ static inline void sched_autogroup_create_attach(struct task_struct *p) { } static inline void sched_autogroup_detach(struct task_struct *p) { } static inline void sched_autogroup_fork(struct signal_struct *sig) { } static inline void sched_autogroup_exit(struct signal_struct *sig) { } +static inline void sched_autogroup_exit_task(struct task_struct *p) { } #endif extern int yield_to(struct task_struct *p, bool preempt); diff --git a/kernel/exit.c b/kernel/exit.c index 9d68c45ebbe3..3076f3089919 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -836,6 +836,7 @@ void __noreturn do_exit(long code) */ perf_event_exit_task(tsk); + sched_autogroup_exit_task(tsk); cgroup_exit(tsk); /* diff --git a/kernel/sched/auto_group.c b/kernel/sched/auto_group.c index ad2b19ad6ca0..f1c8fd566246 100644 --- a/kernel/sched/auto_group.c +++ b/kernel/sched/auto_group.c @@ -115,10 +115,26 @@ bool task_wants_autogroup(struct task_struct *p, struct task_group *tg) * If we race with autogroup_move_group() the caller can use the old * value of signal->autogroup but in this case sched_move_task() will * be called again before autogroup_kref_put(). + * + * However, there is no way sched_autogroup_exit_task() could tell us + * to avoid autogroup->tg, so we abuse PF_EXITING flag for this case. */ + if (p->flags & PF_EXITING) + return false; + return true; } +void sched_autogroup_exit_task(struct task_struct *p) +{ + /* + * We are going to call exit_notify() and autogroup_move_group() can't + * see this thread after that: we can no longer use signal->autogroup. + * See the PF_EXITING check in task_wants_autogroup(). + */ + sched_move_task(p); +} + static void autogroup_move_group(struct task_struct *p, struct autogroup *ag) { @@ -142,6 +158,9 @@ autogroup_move_group(struct task_struct *p, struct autogroup *ag) * In the latter case for_each_thread() can not miss a migrating thread, * cpu_cgroup_attach() must not be possible after cgroup_exit() and it * can't be removed from thread list, we hold ->siglock. + * + * If an exiting thread was already removed from thread list we rely on + * sched_autogroup_exit_task(). */ for_each_thread(p, t) sched_move_task(t);