Merge branch 'linus' into x86/fpu, to resolve conflicts

Conflicts:
	arch/x86/kernel/fpu/core.c

Signed-off-by: Ingo Molnar <mingo@kernel.org>
This commit is contained in:
Ingo Molnar 2016-11-23 07:18:09 +01:00
commit 064e6a8ba6
781 changed files with 9424 additions and 5135 deletions

View File

@ -1,4 +1,4 @@
What: state
What: /sys/devices/system/ibm_rtl/state
Date: Sep 2010
KernelVersion: 2.6.37
Contact: Vernon Mauery <vernux@us.ibm.com>
@ -10,7 +10,7 @@ Description: The state file allows a means by which to change in and
Users: The ibm-prtm userspace daemon uses this interface.
What: version
What: /sys/devices/system/ibm_rtl/version
Date: Sep 2010
KernelVersion: 2.6.37
Contact: Vernon Mauery <vernux@us.ibm.com>

View File

@ -6,7 +6,7 @@ perform in-band IPMI communication with their host.
Required properties:
- compatible : should be "aspeed,ast2400-bt-bmc"
- compatible : should be "aspeed,ast2400-ibt-bmc"
- reg: physical address and size of the registers
Optional properties:
@ -17,7 +17,7 @@ Optional properties:
Example:
ibt@1e789140 {
compatible = "aspeed,ast2400-bt-bmc";
compatible = "aspeed,ast2400-ibt-bmc";
reg = <0x1e789140 0x18>;
interrupts = <8>;
};

View File

@ -43,6 +43,9 @@ Optional properties:
reset signal present internally in some host controller IC designs.
See Documentation/devicetree/bindings/reset/reset.txt for details.
* reset-names: request name for using "resets" property. Must be "reset".
(It will be used together with "resets" property.)
* clocks: from common clock binding: handle to biu and ciu clocks for the
bus interface unit clock and the card interface unit clock.
@ -103,6 +106,8 @@ board specific portions as listed below.
interrupts = <0 75 0>;
#address-cells = <1>;
#size-cells = <0>;
resets = <&rst 20>;
reset-names = "reset";
};
[board specific internal DMA resources]

View File

@ -26,13 +26,16 @@ Required properties:
- "sys"
- "legacy"
- "client"
- resets: Must contain five entries for each entry in reset-names.
- resets: Must contain seven entries for each entry in reset-names.
See ../reset/reset.txt for details.
- reset-names: Must include the following names
- "core"
- "mgmt"
- "mgmt-sticky"
- "pipe"
- "pm"
- "aclk"
- "pclk"
- pinctrl-names : The pin control state names
- pinctrl-0: The "default" pinctrl state
- #interrupt-cells: specifies the number of cells needed to encode an
@ -86,8 +89,10 @@ pcie0: pcie@f8000000 {
reg = <0x0 0xf8000000 0x0 0x2000000>, <0x0 0xfd000000 0x0 0x1000000>;
reg-names = "axi-base", "apb-base";
resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
<&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>;
reset-names = "core", "mgmt", "mgmt-sticky", "pipe";
<&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE> ,
<&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, <&cru SRST_A_PCIE>;
reset-names = "core", "mgmt", "mgmt-sticky", "pipe",
"pm", "pclk", "aclk";
phys = <&pcie_phy>;
phy-names = "pcie-phy";
pinctrl-names = "default";

View File

@ -14,11 +14,6 @@ Required properies:
- #size-cells : The value of this property must be 1
- ranges : defines mapping between pin controller node (parent) to
gpio-bank node (children).
- interrupt-parent: phandle of the interrupt parent to which the external
GPIO interrupts are forwarded to.
- st,syscfg: Should be phandle/offset pair. The phandle to the syscon node
which includes IRQ mux selection register, and the offset of the IRQ mux
selection register.
- pins-are-numbered: Specify the subnodes are using numbered pinmux to
specify pins.
@ -37,6 +32,11 @@ Required properties:
Optional properties:
- reset: : Reference to the reset controller
- interrupt-parent: phandle of the interrupt parent to which the external
GPIO interrupts are forwarded to.
- st,syscfg: Should be phandle/offset pair. The phandle to the syscon node
which includes IRQ mux selection register, and the offset of the IRQ mux
selection register.
Example:
#include <dt-bindings/pinctrl/stm32f429-pinfunc.h>

View File

@ -12,7 +12,7 @@ Required properties:
Optional properties:
- ti,dmic: phandle for the OMAP dmic node if the machine have it connected
- ti,jack_detection: Need to be present if the board capable to detect jack
- ti,jack-detection: Need to be present if the board capable to detect jack
insertion, removal.
Available audio endpoints for the audio-routing table:

View File

@ -447,7 +447,6 @@ prototypes:
int (*flush) (struct file *);
int (*release) (struct inode *, struct file *);
int (*fsync) (struct file *, loff_t start, loff_t end, int datasync);
int (*aio_fsync) (struct kiocb *, int datasync);
int (*fasync) (int, struct file *, int);
int (*lock) (struct file *, int, struct file_lock *);
ssize_t (*readv) (struct file *, const struct iovec *, unsigned long,

View File

@ -828,7 +828,6 @@ struct file_operations {
int (*flush) (struct file *, fl_owner_t id);
int (*release) (struct inode *, struct file *);
int (*fsync) (struct file *, loff_t, loff_t, int datasync);
int (*aio_fsync) (struct kiocb *, int datasync);
int (*fasync) (int, struct file *, int);
int (*lock) (struct file *, int, struct file_lock *);
ssize_t (*sendpage) (struct file *, struct page *, int, size_t, loff_t *, int);

View File

@ -326,7 +326,7 @@ Two parent-locked sibling muxes
This is a good topology.
.--------.
.--------.
.----------. .--| dev D1 |
| parent- |--' '--------'
.--| locked | .--------.
@ -350,7 +350,7 @@ Mux-locked and parent-locked sibling muxes
This is a good topology.
.--------.
.--------.
.----------. .--| dev D1 |
| mux- |--' '--------'
.--| locked | .--------.

View File

@ -67,13 +67,14 @@ Note that DSA does not currently create network interfaces for the "cpu" and
Switch tagging protocols
------------------------
DSA currently supports 4 different tagging protocols, and a tag-less mode as
DSA currently supports 5 different tagging protocols, and a tag-less mode as
well. The different protocols are implemented in:
net/dsa/tag_trailer.c: Marvell's 4 trailer tag mode (legacy)
net/dsa/tag_dsa.c: Marvell's original DSA tag
net/dsa/tag_edsa.c: Marvell's enhanced DSA tag
net/dsa/tag_brcm.c: Broadcom's 4 bytes tag
net/dsa/tag_qca.c: Qualcomm's 2 bytes tag
The exact format of the tag protocol is vendor specific, but in general, they
all contain something which:

View File

@ -777,6 +777,17 @@ Gets the current timestamp of kvmclock as seen by the current guest. In
conjunction with KVM_SET_CLOCK, it is used to ensure monotonicity on scenarios
such as migration.
When KVM_CAP_ADJUST_CLOCK is passed to KVM_CHECK_EXTENSION, it returns the
set of bits that KVM can return in struct kvm_clock_data's flag member.
The only flag defined now is KVM_CLOCK_TSC_STABLE. If set, the returned
value is the exact kvmclock value seen by all VCPUs at the instant
when KVM_GET_CLOCK was called. If clear, the returned value is simply
CLOCK_MONOTONIC plus a constant offset; the offset can be modified
with KVM_SET_CLOCK. KVM will try to make all VCPUs follow this clock,
but the exact value read by each VCPU could differ, because the host
TSC is not stable.
struct kvm_clock_data {
__u64 clock; /* kvmclock current value */
__u32 flags;

View File

@ -4,7 +4,17 @@ KVM Lock Overview
1. Acquisition Orders
---------------------
(to be written)
The acquisition orders for mutexes are as follows:
- kvm->lock is taken outside vcpu->mutex
- kvm->lock is taken outside kvm->slots_lock and kvm->irq_lock
- kvm->slots_lock is taken outside kvm->irq_lock, though acquiring
them together is quite rare.
For spinlocks, kvm_lock is taken outside kvm->mmu_lock. Everything
else is a leaf: no other lock is taken inside the critical sections.
2: Exception
------------

View File

@ -7084,6 +7084,7 @@ F: drivers/scsi/53c700*
LED SUBSYSTEM
M: Richard Purdie <rpurdie@rpsys.net>
M: Jacek Anaszewski <j.anaszewski@samsung.com>
M: Pavel Machek <pavel@ucw.cz>
L: linux-leds@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds.git
S: Maintained
@ -7925,6 +7926,10 @@ F: mm/
MEMORY TECHNOLOGY DEVICES (MTD)
M: David Woodhouse <dwmw2@infradead.org>
M: Brian Norris <computersforpeace@gmail.com>
M: Boris Brezillon <boris.brezillon@free-electrons.com>
M: Marek Vasut <marek.vasut@gmail.com>
M: Richard Weinberger <richard@nod.at>
M: Cyrille Pitchen <cyrille.pitchen@atmel.com>
L: linux-mtd@lists.infradead.org
W: http://www.linux-mtd.infradead.org/
Q: http://patchwork.ozlabs.org/project/linux-mtd/list/
@ -8053,6 +8058,7 @@ F: drivers/infiniband/hw/mlx4/
F: include/linux/mlx4/
MELLANOX MLX5 core VPI driver
M: Saeed Mahameed <saeedm@mellanox.com>
M: Matan Barak <matanb@mellanox.com>
M: Leon Romanovsky <leonro@mellanox.com>
L: netdev@vger.kernel.org
@ -9331,7 +9337,7 @@ PCI DRIVER FOR INTEL VOLUME MANAGEMENT DEVICE (VMD)
M: Keith Busch <keith.busch@intel.com>
L: linux-pci@vger.kernel.org
S: Supported
F: arch/x86/pci/vmd.c
F: drivers/pci/host/vmd.c
PCIE DRIVER FOR ST SPEAR13XX
M: Pratyush Anand <pratyush.anand@gmail.com>
@ -11404,6 +11410,17 @@ W: http://www.st.com/spear
S: Maintained
F: drivers/clk/spear/
SPI NOR SUBSYSTEM
M: Cyrille Pitchen <cyrille.pitchen@atmel.com>
M: Marek Vasut <marek.vasut@gmail.com>
L: linux-mtd@lists.infradead.org
W: http://www.linux-mtd.infradead.org/
Q: http://patchwork.ozlabs.org/project/linux-mtd/list/
T: git git://github.com/spi-nor/linux.git
S: Maintained
F: drivers/mtd/spi-nor/
F: include/linux/mtd/spi-nor.h
SPI SUBSYSTEM
M: Mark Brown <broonie@kernel.org>
L: linux-spi@vger.kernel.org
@ -12783,6 +12800,7 @@ F: include/uapi/linux/virtio_console.h
VIRTIO CORE, NET AND BLOCK DRIVERS
M: "Michael S. Tsirkin" <mst@redhat.com>
M: Jason Wang <jasowang@redhat.com>
L: virtualization@lists.linux-foundation.org
S: Maintained
F: Documentation/devicetree/bindings/virtio/
@ -12813,6 +12831,7 @@ F: include/uapi/linux/virtio_gpu.h
VIRTIO HOST (VHOST)
M: "Michael S. Tsirkin" <mst@redhat.com>
M: Jason Wang <jasowang@redhat.com>
L: kvm@vger.kernel.org
L: virtualization@lists.linux-foundation.org
L: netdev@vger.kernel.org

View File

@ -1,7 +1,7 @@
VERSION = 4
PATCHLEVEL = 9
SUBLEVEL = 0
EXTRAVERSION = -rc3
EXTRAVERSION = -rc6
NAME = Psychotic Stoned Sheep
# *DOCUMENTATION*
@ -370,7 +370,7 @@ LDFLAGS_MODULE =
CFLAGS_KERNEL =
AFLAGS_KERNEL =
LDFLAGS_vmlinux =
CFLAGS_GCOV = -fprofile-arcs -ftest-coverage -fno-tree-loop-im
CFLAGS_GCOV = -fprofile-arcs -ftest-coverage -fno-tree-loop-im -Wno-maybe-uninitialized
CFLAGS_KCOV := $(call cc-option,-fsanitize-coverage=trace-pc,)
@ -399,11 +399,12 @@ KBUILD_CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
-fno-strict-aliasing -fno-common \
-Werror-implicit-function-declaration \
-Wno-format-security \
-std=gnu89
-std=gnu89 $(call cc-option,-fno-PIE)
KBUILD_AFLAGS_KERNEL :=
KBUILD_CFLAGS_KERNEL :=
KBUILD_AFLAGS := -D__ASSEMBLY__
KBUILD_AFLAGS := -D__ASSEMBLY__ $(call cc-option,-fno-PIE)
KBUILD_AFLAGS_MODULE := -DMODULE
KBUILD_CFLAGS_MODULE := -DMODULE
KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds
@ -620,7 +621,6 @@ ARCH_CFLAGS :=
include arch/$(SRCARCH)/Makefile
KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks,)
KBUILD_CFLAGS += $(call cc-disable-warning,maybe-uninitialized,)
KBUILD_CFLAGS += $(call cc-disable-warning,frame-address,)
ifdef CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
@ -629,15 +629,18 @@ KBUILD_CFLAGS += $(call cc-option,-fdata-sections,)
endif
ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
KBUILD_CFLAGS += -Os
KBUILD_CFLAGS += -Os $(call cc-disable-warning,maybe-uninitialized,)
else
ifdef CONFIG_PROFILE_ALL_BRANCHES
KBUILD_CFLAGS += -O2
KBUILD_CFLAGS += -O2 $(call cc-disable-warning,maybe-uninitialized,)
else
KBUILD_CFLAGS += -O2
endif
endif
KBUILD_CFLAGS += $(call cc-ifversion, -lt, 0409, \
$(call cc-disable-warning,maybe-uninitialized,))
# Tell gcc to never replace conditional load with a non-conditional one
KBUILD_CFLAGS += $(call cc-option,--param=allow-store-data-races=0)

View File

@ -50,6 +50,9 @@ atleast_gcc44 := $(call cc-ifversion, -ge, 0404, y)
cflags-$(atleast_gcc44) += -fsection-anchors
cflags-$(CONFIG_ARC_HAS_LLSC) += -mlock
cflags-$(CONFIG_ARC_HAS_SWAPE) += -mswape
ifdef CONFIG_ISA_ARCV2
ifndef CONFIG_ARC_HAS_LL64
@ -68,7 +71,9 @@ cflags-$(CONFIG_ARC_DW2_UNWIND) += -fasynchronous-unwind-tables $(cfi)
ifndef CONFIG_CC_OPTIMIZE_FOR_SIZE
# Generic build system uses -O2, we want -O3
# Note: No need to add to cflags-y as that happens anyways
ARCH_CFLAGS += -O3
#
# Disable the false maybe-uninitialized warings gcc spits out at -O3
ARCH_CFLAGS += -O3 $(call cc-disable-warning,maybe-uninitialized,)
endif
# small data is default for elf32 tool-chain. If not usable, disable it

View File

@ -71,7 +71,7 @@
reg-io-width = <4>;
};
arcpmu0: pmu {
arcpct0: pct {
compatible = "snps,arc700-pct";
};
};

View File

@ -69,7 +69,7 @@
};
};
arcpmu0: pmu {
arcpct0: pct {
compatible = "snps,arc700-pct";
};
};

View File

@ -83,5 +83,9 @@
reg = <0xf0003000 0x44>;
interrupts = <7>;
};
arcpct0: pct {
compatible = "snps,arc700-pct";
};
};
};

View File

@ -14,6 +14,7 @@ CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="../arc_initramfs/"
CONFIG_KALLSYMS_ALL=y
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_KPROBES=y

View File

@ -14,6 +14,7 @@ CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="../../arc_initramfs_hs/"
CONFIG_KALLSYMS_ALL=y
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_KPROBES=y

View File

@ -12,6 +12,7 @@ CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="../arc_initramfs_hs/"
CONFIG_KALLSYMS_ALL=y
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_KPROBES=y

View File

@ -14,6 +14,7 @@ CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="../arc_initramfs/"
CONFIG_KALLSYMS_ALL=y
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_KPROBES=y

View File

@ -14,6 +14,7 @@ CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="../arc_initramfs_hs/"
CONFIG_KALLSYMS_ALL=y
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_KPROBES=y

View File

@ -10,6 +10,7 @@ CONFIG_IKCONFIG_PROC=y
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="../arc_initramfs_hs/"
CONFIG_PERF_EVENTS=y
# CONFIG_COMPAT_BRK is not set
CONFIG_KPROBES=y
CONFIG_MODULES=y
@ -34,7 +35,6 @@ CONFIG_INET=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
# CONFIG_WIRELESS is not set
CONFIG_DEVTMPFS=y
@ -72,7 +72,6 @@ CONFIG_SERIAL_OF_PLATFORM=y
# CONFIG_HWMON is not set
CONFIG_DRM=y
CONFIG_DRM_ARCPGU=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
# CONFIG_HID is not set
# CONFIG_USB_SUPPORT is not set

View File

@ -43,12 +43,14 @@
#define STATUS_AE_BIT 5 /* Exception active */
#define STATUS_DE_BIT 6 /* PC is in delay slot */
#define STATUS_U_BIT 7 /* User/Kernel mode */
#define STATUS_Z_BIT 11
#define STATUS_L_BIT 12 /* Loop inhibit */
/* These masks correspond to the status word(STATUS_32) bits */
#define STATUS_AE_MASK (1<<STATUS_AE_BIT)
#define STATUS_DE_MASK (1<<STATUS_DE_BIT)
#define STATUS_U_MASK (1<<STATUS_U_BIT)
#define STATUS_Z_MASK (1<<STATUS_Z_BIT)
#define STATUS_L_MASK (1<<STATUS_L_BIT)
/*

View File

@ -37,9 +37,9 @@ extern const char *arc_platform_smp_cpuinfo(void);
* API expected BY platform smp code (FROM arch smp code)
*
* smp_ipi_irq_setup:
* Takes @cpu and @irq to which the arch-common ISR is hooked up
* Takes @cpu and @hwirq to which the arch-common ISR is hooked up
*/
extern int smp_ipi_irq_setup(int cpu, int irq);
extern int smp_ipi_irq_setup(int cpu, irq_hw_number_t hwirq);
/*
* struct plat_smp_ops - SMP callbacks provided by platform to ARC SMP

View File

@ -31,6 +31,8 @@ static void __init arc_set_early_base_baud(unsigned long dt_root)
arc_base_baud = 166666666; /* Fixed 166.6MHz clk (TB10x) */
else if (of_flat_dt_is_compatible(dt_root, "snps,arc-sdp"))
arc_base_baud = 33333333; /* Fixed 33MHz clk (AXS10x) */
else if (of_flat_dt_is_compatible(dt_root, "ezchip,arc-nps"))
arc_base_baud = 800000000; /* Fixed 800MHz clk (NPS) */
else
arc_base_baud = 50000000; /* Fixed default 50MHz */
}

View File

@ -181,6 +181,8 @@ idu_irq_set_affinity(struct irq_data *data, const struct cpumask *cpumask,
{
unsigned long flags;
cpumask_t online;
unsigned int destination_bits;
unsigned int distribution_mode;
/* errout if no online cpu per @cpumask */
if (!cpumask_and(&online, cpumask, cpu_online_mask))
@ -188,8 +190,15 @@ idu_irq_set_affinity(struct irq_data *data, const struct cpumask *cpumask,
raw_spin_lock_irqsave(&mcip_lock, flags);
idu_set_dest(data->hwirq, cpumask_bits(&online)[0]);
idu_set_mode(data->hwirq, IDU_M_TRIG_LEVEL, IDU_M_DISTRI_RR);
destination_bits = cpumask_bits(&online)[0];
idu_set_dest(data->hwirq, destination_bits);
if (ffs(destination_bits) == fls(destination_bits))
distribution_mode = IDU_M_DISTRI_DEST;
else
distribution_mode = IDU_M_DISTRI_RR;
idu_set_mode(data->hwirq, IDU_M_TRIG_LEVEL, distribution_mode);
raw_spin_unlock_irqrestore(&mcip_lock, flags);
@ -207,16 +216,15 @@ static struct irq_chip idu_irq_chip = {
};
static int idu_first_irq;
static irq_hw_number_t idu_first_hwirq;
static void idu_cascade_isr(struct irq_desc *desc)
{
struct irq_domain *domain = irq_desc_get_handler_data(desc);
unsigned int core_irq = irq_desc_get_irq(desc);
unsigned int idu_irq;
struct irq_domain *idu_domain = irq_desc_get_handler_data(desc);
irq_hw_number_t core_hwirq = irqd_to_hwirq(irq_desc_get_irq_data(desc));
irq_hw_number_t idu_hwirq = core_hwirq - idu_first_hwirq;
idu_irq = core_irq - idu_first_irq;
generic_handle_irq(irq_find_mapping(domain, idu_irq));
generic_handle_irq(irq_find_mapping(idu_domain, idu_hwirq));
}
static int idu_irq_map(struct irq_domain *d, unsigned int virq, irq_hw_number_t hwirq)
@ -282,7 +290,7 @@ idu_of_init(struct device_node *intc, struct device_node *parent)
struct irq_domain *domain;
/* Read IDU BCR to confirm nr_irqs */
int nr_irqs = of_irq_count(intc);
int i, irq;
int i, virq;
struct mcip_bcr mp;
READ_BCR(ARC_REG_MCIP_BCR, mp);
@ -303,11 +311,11 @@ idu_of_init(struct device_node *intc, struct device_node *parent)
* however we need it to get the parent virq and set IDU handler
* as first level isr
*/
irq = irq_of_parse_and_map(intc, i);
virq = irq_of_parse_and_map(intc, i);
if (!i)
idu_first_irq = irq;
idu_first_hwirq = irqd_to_hwirq(irq_get_irq_data(virq));
irq_set_chained_handler_and_data(irq, idu_cascade_isr, domain);
irq_set_chained_handler_and_data(virq, idu_cascade_isr, domain);
}
__mcip_cmd(CMD_IDU_ENABLE, 0);

View File

@ -43,8 +43,8 @@ SYSCALL_DEFINE0(arc_gettls)
SYSCALL_DEFINE3(arc_usr_cmpxchg, int *, uaddr, int, expected, int, new)
{
int uval;
int ret;
struct pt_regs *regs = current_pt_regs();
int uval = -EFAULT;
/*
* This is only for old cores lacking LLOCK/SCOND, which by defintion
@ -54,24 +54,26 @@ SYSCALL_DEFINE3(arc_usr_cmpxchg, int *, uaddr, int, expected, int, new)
*/
WARN_ON_ONCE(IS_ENABLED(CONFIG_SMP));
/* Z indicates to userspace if operation succeded */
regs->status32 &= ~STATUS_Z_MASK;
if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
return -EFAULT;
preempt_disable();
ret = __get_user(uval, uaddr);
if (ret)
if (__get_user(uval, uaddr))
goto done;
if (uval != expected)
ret = -EAGAIN;
else
ret = __put_user(new, uaddr);
if (uval == expected) {
if (!__put_user(new, uaddr))
regs->status32 |= STATUS_Z_MASK;
}
done:
preempt_enable();
return ret;
return uval;
}
void arch_cpu_idle(void)

View File

@ -22,6 +22,7 @@
#include <linux/atomic.h>
#include <linux/cpumask.h>
#include <linux/reboot.h>
#include <linux/irqdomain.h>
#include <asm/processor.h>
#include <asm/setup.h>
#include <asm/mach_desc.h>
@ -67,11 +68,13 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
int i;
/*
* Initialise the present map, which describes the set of CPUs
* actually populated at the present time.
* if platform didn't set the present map already, do it now
* boot cpu is set to present already by init/main.c
*/
for (i = 0; i < max_cpus; i++)
set_cpu_present(i, true);
if (num_present_cpus() <= 1) {
for (i = 0; i < max_cpus; i++)
set_cpu_present(i, true);
}
}
void __init smp_cpus_done(unsigned int max_cpus)
@ -351,20 +354,24 @@ irqreturn_t do_IPI(int irq, void *dev_id)
*/
static DEFINE_PER_CPU(int, ipi_dev);
int smp_ipi_irq_setup(int cpu, int irq)
int smp_ipi_irq_setup(int cpu, irq_hw_number_t hwirq)
{
int *dev = per_cpu_ptr(&ipi_dev, cpu);
unsigned int virq = irq_find_mapping(NULL, hwirq);
if (!virq)
panic("Cannot find virq for root domain and hwirq=%lu", hwirq);
/* Boot cpu calls request, all call enable */
if (!cpu) {
int rc;
rc = request_percpu_irq(irq, do_IPI, "IPI Interrupt", dev);
rc = request_percpu_irq(virq, do_IPI, "IPI Interrupt", dev);
if (rc)
panic("Percpu IRQ request failed for %d\n", irq);
panic("Percpu IRQ request failed for %u\n", virq);
}
enable_percpu_irq(irq, 0);
enable_percpu_irq(virq, 0);
return 0;
}

View File

@ -152,14 +152,17 @@ static cycle_t arc_read_rtc(struct clocksource *cs)
cycle_t full;
} stamp;
__asm__ __volatile(
"1: \n"
" lr %0, [AUX_RTC_LOW] \n"
" lr %1, [AUX_RTC_HIGH] \n"
" lr %2, [AUX_RTC_CTRL] \n"
" bbit0.nt %2, 31, 1b \n"
: "=r" (stamp.low), "=r" (stamp.high), "=r" (status));
/*
* hardware has an internal state machine which tracks readout of
* low/high and updates the CTRL.status if
* - interrupt/exception taken between the two reads
* - high increments after low has been read
*/
do {
stamp.low = read_aux_reg(AUX_RTC_LOW);
stamp.high = read_aux_reg(AUX_RTC_HIGH);
status = read_aux_reg(AUX_RTC_CTRL);
} while (!(status & _BITUL(31)));
return stamp.full;
}

View File

@ -105,6 +105,31 @@ static void arc_dma_free(struct device *dev, size_t size, void *vaddr,
__free_pages(page, get_order(size));
}
static int arc_dma_mmap(struct device *dev, struct vm_area_struct *vma,
void *cpu_addr, dma_addr_t dma_addr, size_t size,
unsigned long attrs)
{
unsigned long user_count = vma_pages(vma);
unsigned long count = PAGE_ALIGN(size) >> PAGE_SHIFT;
unsigned long pfn = __phys_to_pfn(plat_dma_to_phys(dev, dma_addr));
unsigned long off = vma->vm_pgoff;
int ret = -ENXIO;
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
if (dma_mmap_from_coherent(dev, vma, cpu_addr, size, &ret))
return ret;
if (off < count && user_count <= (count - off)) {
ret = remap_pfn_range(vma, vma->vm_start,
pfn + off,
user_count << PAGE_SHIFT,
vma->vm_page_prot);
}
return ret;
}
/*
* streaming DMA Mapping API...
* CPU accesses page via normal paddr, thus needs to explicitly made
@ -193,6 +218,7 @@ static int arc_dma_supported(struct device *dev, u64 dma_mask)
struct dma_map_ops arc_dma_ops = {
.alloc = arc_dma_alloc,
.free = arc_dma_free,
.mmap = arc_dma_mmap,
.map_page = arc_dma_map_page,
.map_sg = arc_dma_map_sg,
.sync_single_for_device = arc_dma_sync_single_for_device,

View File

@ -140,16 +140,10 @@ static void eznps_init_per_cpu(int cpu)
mtm_enable_core(cpu);
}
static void eznps_ipi_clear(int irq)
{
write_aux_reg(CTOP_AUX_IACK, 1 << irq);
}
struct plat_smp_ops plat_smp_ops = {
.info = smp_cpuinfo_buf,
.init_early_smp = eznps_init_cpumasks,
.cpu_kick = eznps_smp_wakeup_cpu,
.ipi_send = eznps_ipi_send,
.init_per_cpu = eznps_init_per_cpu,
.ipi_clear = eznps_ipi_clear,
};

View File

@ -64,8 +64,8 @@
};
ldo3_reg: ldo3 {
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1800000>;
regulator-min-microvolt = <1725000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
@ -76,8 +76,8 @@
};
ldo5_reg: ldo5 {
regulator-min-microvolt = <1725000>;
regulator-max-microvolt = <3300000>;
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3600000>;
regulator-always-on;
};
@ -100,14 +100,14 @@
};
ldo9_reg: ldo9 {
regulator-min-microvolt = <1200000>;
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <3600000>;
regulator-always-on;
};
ldo10_reg: ldo10 {
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <3650000>;
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <3600000>;
regulator-always-on;
};
};

View File

@ -13,6 +13,11 @@
};
};
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0>;
};
wl12xx_vmmc: wl12xx_vmmc {
compatible = "regulator-fixed";
regulator-name = "vwl1271";

View File

@ -13,9 +13,9 @@
};
};
memory@0 {
memory@80000000 {
device_type = "memory";
reg = <0 0>;
reg = <0x80000000 0>;
};
leds {

View File

@ -124,6 +124,7 @@
compatible = "ti,abe-twl6040";
ti,model = "omap5-uevm";
ti,jack-detection;
ti,mclk-freq = <19200000>;
ti,mcpdm = <&mcpdm>;
@ -415,7 +416,7 @@
ti,backup-battery-charge-high-current;
};
gpadc {
gpadc: gpadc {
compatible = "ti,palmas-gpadc";
interrupts = <18 0
16 0
@ -475,8 +476,8 @@
smps6_reg: smps6 {
/* VDD_DDR3 - over VDD_SMPS6 */
regulator-name = "smps6";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
};

View File

@ -74,7 +74,7 @@
/* Low speed expansion connector */
spi0: spi@9844000 {
label = "LS-SPI0";
cs-gpio = <&pio30 3 0>;
cs-gpios = <&pio30 3 0>;
status = "okay";
};

View File

@ -282,11 +282,15 @@
uart1_pins_a: uart1@0 {
allwinner,pins = "PG6", "PG7";
allwinner,function = "uart1";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart1_pins_cts_rts_a: uart1-cts-rts@0 {
allwinner,pins = "PG8", "PG9";
allwinner,function = "uart1";
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc0_pins_a: mmc0@0 {

View File

@ -66,6 +66,7 @@ extern char __kvm_hyp_vector[];
extern void __kvm_flush_vm_context(void);
extern void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa);
extern void __kvm_tlb_flush_vmid(struct kvm *kvm);
extern void __kvm_tlb_flush_local_vmid(struct kvm_vcpu *vcpu);
extern int __kvm_vcpu_run(struct kvm_vcpu *vcpu);

View File

@ -57,6 +57,9 @@ struct kvm_arch {
/* VTTBR value associated with below pgd and vmid */
u64 vttbr;
/* The last vcpu id that ran on each physical CPU */
int __percpu *last_vcpu_ran;
/* Timer */
struct arch_timer_kvm timer;

View File

@ -71,6 +71,7 @@
#define ICIALLUIS __ACCESS_CP15(c7, 0, c1, 0)
#define ATS1CPR __ACCESS_CP15(c7, 0, c8, 0)
#define TLBIALLIS __ACCESS_CP15(c8, 0, c3, 0)
#define TLBIALL __ACCESS_CP15(c8, 0, c7, 0)
#define TLBIALLNSNHIS __ACCESS_CP15(c8, 4, c3, 4)
#define PRRR __ACCESS_CP15(c10, 0, c2, 0)
#define NMRR __ACCESS_CP15(c10, 0, c2, 1)

View File

@ -74,6 +74,26 @@ void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long
dump_mem("", "Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs));
}
void dump_backtrace_stm(u32 *stack, u32 instruction)
{
char str[80], *p;
unsigned int x;
int reg;
for (reg = 10, x = 0, p = str; reg >= 0; reg--) {
if (instruction & BIT(reg)) {
p += sprintf(p, " r%d:%08x", reg, *stack--);
if (++x == 6) {
x = 0;
p = str;
printk("%s\n", str);
}
}
}
if (p != str)
printk("%s\n", str);
}
#ifndef CONFIG_ARM_UNWIND
/*
* Stack pointers should always be within the kernels view of

View File

@ -3,6 +3,9 @@
* Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>
*/
/* No __ro_after_init data in the .rodata section - which will always be ro */
#define RO_AFTER_INIT_DATA
#include <asm-generic/vmlinux.lds.h>
#include <asm/cache.h>
#include <asm/thread_info.h>
@ -223,6 +226,8 @@ SECTIONS
. = ALIGN(PAGE_SIZE);
__init_end = .;
*(.data..ro_after_init)
NOSAVE_DATA
CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES)
READ_MOSTLY_DATA(L1_CACHE_BYTES)

View File

@ -114,11 +114,18 @@ void kvm_arch_check_processor_compat(void *rtn)
*/
int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
{
int ret = 0;
int ret, cpu;
if (type)
return -EINVAL;
kvm->arch.last_vcpu_ran = alloc_percpu(typeof(*kvm->arch.last_vcpu_ran));
if (!kvm->arch.last_vcpu_ran)
return -ENOMEM;
for_each_possible_cpu(cpu)
*per_cpu_ptr(kvm->arch.last_vcpu_ran, cpu) = -1;
ret = kvm_alloc_stage2_pgd(kvm);
if (ret)
goto out_fail_alloc;
@ -141,6 +148,8 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
out_free_stage2_pgd:
kvm_free_stage2_pgd(kvm);
out_fail_alloc:
free_percpu(kvm->arch.last_vcpu_ran);
kvm->arch.last_vcpu_ran = NULL;
return ret;
}
@ -168,6 +177,9 @@ void kvm_arch_destroy_vm(struct kvm *kvm)
{
int i;
free_percpu(kvm->arch.last_vcpu_ran);
kvm->arch.last_vcpu_ran = NULL;
for (i = 0; i < KVM_MAX_VCPUS; ++i) {
if (kvm->vcpus[i]) {
kvm_arch_vcpu_free(kvm->vcpus[i]);
@ -312,6 +324,19 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)
void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
{
int *last_ran;
last_ran = this_cpu_ptr(vcpu->kvm->arch.last_vcpu_ran);
/*
* We might get preempted before the vCPU actually runs, but
* over-invalidation doesn't affect correctness.
*/
if (*last_ran != vcpu->vcpu_id) {
kvm_call_hyp(__kvm_tlb_flush_local_vmid, vcpu);
*last_ran = vcpu->vcpu_id;
}
vcpu->cpu = cpu;
vcpu->arch.host_cpu_context = this_cpu_ptr(kvm_host_cpu_state);

View File

@ -55,6 +55,21 @@ void __hyp_text __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa)
__kvm_tlb_flush_vmid(kvm);
}
void __hyp_text __kvm_tlb_flush_local_vmid(struct kvm_vcpu *vcpu)
{
struct kvm *kvm = kern_hyp_va(kern_hyp_va(vcpu)->kvm);
/* Switch to requested VMID */
write_sysreg(kvm->arch.vttbr, VTTBR);
isb();
write_sysreg(0, TLBIALL);
dsb(nsh);
isb();
write_sysreg(0, VTTBR);
}
void __hyp_text __kvm_flush_vm_context(void)
{
write_sysreg(0, TLBIALLNSNHIS);

View File

@ -10,6 +10,7 @@
* 27/03/03 Ian Molton Clean up CONFIG_CPU
*
*/
#include <linux/kern_levels.h>
#include <linux/linkage.h>
#include <asm/assembler.h>
.text
@ -83,13 +84,13 @@ for_each_frame: tst frame, mask @ Check for address exceptions
teq r3, r1, lsr #11
ldreq r0, [frame, #-8] @ get sp
subeq r0, r0, #4 @ point at the last arg
bleq .Ldumpstm @ dump saved registers
bleq dump_backtrace_stm @ dump saved registers
1004: ldr r1, [sv_pc, #0] @ if stmfd sp!, {..., fp, ip, lr, pc}
ldr r3, .Ldsi @ instruction exists,
teq r3, r1, lsr #11
subeq r0, frame, #16
bleq .Ldumpstm @ dump saved registers
bleq dump_backtrace_stm @ dump saved registers
teq sv_fp, #0 @ zero saved fp means
beq no_frame @ no further frames
@ -112,38 +113,6 @@ ENDPROC(c_backtrace)
.long 1004b, 1006b
.popsection
#define instr r4
#define reg r5
#define stack r6
.Ldumpstm: stmfd sp!, {instr, reg, stack, r7, lr}
mov stack, r0
mov instr, r1
mov reg, #10
mov r7, #0
1: mov r3, #1
ARM( tst instr, r3, lsl reg )
THUMB( lsl r3, reg )
THUMB( tst instr, r3 )
beq 2f
add r7, r7, #1
teq r7, #6
moveq r7, #0
adr r3, .Lcr
addne r3, r3, #1 @ skip newline
ldr r2, [stack], #-4
mov r1, reg
adr r0, .Lfp
bl printk
2: subs reg, reg, #1
bpl 1b
teq r7, #0
adrne r0, .Lcr
blne printk
ldmfd sp!, {instr, reg, stack, r7, pc}
.Lfp: .asciz " r%d:%08x%s"
.Lcr: .asciz "\n"
.Lbad: .asciz "Backtrace aborted due to bad frame pointer <%p>\n"
.align
.Ldsi: .word 0xe92dd800 >> 11 @ stmfd sp!, {... fp, ip, lr, pc}

View File

@ -71,6 +71,7 @@ config SOC_AM43XX
select HAVE_ARM_TWD
select ARM_ERRATA_754322
select ARM_ERRATA_775420
select OMAP_INTERCONNECT
config SOC_DRA7XX
bool "TI DRA7XX"

View File

@ -205,11 +205,15 @@ void __init omap2xxx_check_revision(void)
#define OMAP3_SHOW_FEATURE(feat) \
if (omap3_has_ ##feat()) \
printk(#feat" ");
n += scnprintf(buf + n, sizeof(buf) - n, #feat " ");
static void __init omap3_cpuinfo(void)
{
const char *cpu_name;
char buf[64];
int n = 0;
memset(buf, 0, sizeof(buf));
/*
* OMAP3430 and OMAP3530 are assumed to be same.
@ -241,10 +245,10 @@ static void __init omap3_cpuinfo(void)
cpu_name = "OMAP3503";
}
sprintf(soc_name, "%s", cpu_name);
scnprintf(soc_name, sizeof(soc_name), "%s", cpu_name);
/* Print verbose information */
pr_info("%s %s (", soc_name, soc_rev);
n += scnprintf(buf, sizeof(buf) - n, "%s %s (", soc_name, soc_rev);
OMAP3_SHOW_FEATURE(l2cache);
OMAP3_SHOW_FEATURE(iva);
@ -252,8 +256,10 @@ static void __init omap3_cpuinfo(void)
OMAP3_SHOW_FEATURE(neon);
OMAP3_SHOW_FEATURE(isp);
OMAP3_SHOW_FEATURE(192mhz_clk);
printk(")\n");
if (*(buf + n - 1) == ' ')
n--;
n += scnprintf(buf + n, sizeof(buf) - n, ")\n");
pr_info("%s", buf);
}
#define OMAP3_CHECK_FEATURE(status,feat) \

View File

@ -319,6 +319,9 @@ void __init omap3_prm_init_pm(bool has_uart4, bool has_iva)
if (has_uart4) {
en_uart4_mask = OMAP3630_EN_UART4_MASK;
grpsel_uart4_mask = OMAP3630_GRPSEL_UART4_MASK;
} else {
en_uart4_mask = 0;
grpsel_uart4_mask = 0;
}
/* Enable wakeups in PER */

View File

@ -87,6 +87,12 @@ int voltdm_scale(struct voltagedomain *voltdm,
return -ENODATA;
}
if (!voltdm->volt_data) {
pr_err("%s: No voltage data defined for vdd_%s\n",
__func__, voltdm->name);
return -ENODATA;
}
/* Adjust voltage to the exact voltage from the OPP table */
for (i = 0; voltdm->volt_data[i].volt_nominal != 0; i++) {
if (voltdm->volt_data[i].volt_nominal >= target_volt) {

View File

@ -1167,7 +1167,7 @@ static int __init dma_debug_do_init(void)
dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
return 0;
}
fs_initcall(dma_debug_do_init);
core_initcall(dma_debug_do_init);
#ifdef CONFIG_ARM_DMA_USE_IOMMU

View File

@ -96,7 +96,7 @@ ENTRY(cpu_cm7_proc_fin)
ret lr
ENDPROC(cpu_cm7_proc_fin)
.section ".text.init", #alloc, #execinstr
.section ".init.text", #alloc, #execinstr
__v7m_cm7_setup:
mov r8, #(V7M_SCB_CCR_DC | V7M_SCB_CCR_IC| V7M_SCB_CCR_BP)

View File

@ -105,7 +105,7 @@
status = "disabled";
};
nb_perih_clk: nb-periph-clk@13000{
nb_periph_clk: nb-periph-clk@13000 {
compatible = "marvell,armada-3700-periph-clock-nb";
reg = <0x13000 0x100>;
clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
@ -113,7 +113,7 @@
#clock-cells = <1>;
};
sb_perih_clk: sb-periph-clk@18000{
sb_periph_clk: sb-periph-clk@18000 {
compatible = "marvell,armada-3700-periph-clock-sb";
reg = <0x18000 0x100>;
clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,

View File

@ -130,8 +130,8 @@
reg = <0x700600 0x50>;
#address-cells = <0x1>;
#size-cells = <0x0>;
cell-index = <1>;
clocks = <&cps_syscon0 0 3>;
cell-index = <3>;
clocks = <&cps_syscon0 1 21>;
status = "disabled";
};
@ -140,7 +140,7 @@
reg = <0x700680 0x50>;
#address-cells = <1>;
#size-cells = <0>;
cell-index = <2>;
cell-index = <4>;
clocks = <&cps_syscon0 1 21>;
status = "disabled";
};

View File

@ -300,8 +300,11 @@
ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x600000
0x81000000 0x0 0xfa600000 0x0 0xfa600000 0x0 0x100000>;
resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
<&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>;
reset-names = "core", "mgmt", "mgmt-sticky", "pipe";
<&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>,
<&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>,
<&cru SRST_A_PCIE>;
reset-names = "core", "mgmt", "mgmt-sticky", "pipe",
"pm", "pclk", "aclk";
status = "disabled";
pcie0_intc: interrupt-controller {

View File

@ -1,7 +1,7 @@
#ifndef __ASM_ALTERNATIVE_H
#define __ASM_ALTERNATIVE_H
#include <asm/cpufeature.h>
#include <asm/cpucaps.h>
#include <asm/insn.h>
#ifndef __ASSEMBLY__

View File

@ -0,0 +1,40 @@
/*
* arch/arm64/include/asm/cpucaps.h
*
* Copyright (C) 2016 ARM Ltd.
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef __ASM_CPUCAPS_H
#define __ASM_CPUCAPS_H
#define ARM64_WORKAROUND_CLEAN_CACHE 0
#define ARM64_WORKAROUND_DEVICE_LOAD_ACQUIRE 1
#define ARM64_WORKAROUND_845719 2
#define ARM64_HAS_SYSREG_GIC_CPUIF 3
#define ARM64_HAS_PAN 4
#define ARM64_HAS_LSE_ATOMICS 5
#define ARM64_WORKAROUND_CAVIUM_23154 6
#define ARM64_WORKAROUND_834220 7
#define ARM64_HAS_NO_HW_PREFETCH 8
#define ARM64_HAS_UAO 9
#define ARM64_ALT_PAN_NOT_UAO 10
#define ARM64_HAS_VIRT_HOST_EXTN 11
#define ARM64_WORKAROUND_CAVIUM_27456 12
#define ARM64_HAS_32BIT_EL0 13
#define ARM64_HYP_OFFSET_LOW 14
#define ARM64_MISMATCHED_CACHE_LINE_SIZE 15
#define ARM64_NCAPS 16
#endif /* __ASM_CPUCAPS_H */

View File

@ -11,6 +11,7 @@
#include <linux/jump_label.h>
#include <asm/cpucaps.h>
#include <asm/hwcap.h>
#include <asm/sysreg.h>
@ -24,25 +25,6 @@
#define MAX_CPU_FEATURES (8 * sizeof(elf_hwcap))
#define cpu_feature(x) ilog2(HWCAP_ ## x)
#define ARM64_WORKAROUND_CLEAN_CACHE 0
#define ARM64_WORKAROUND_DEVICE_LOAD_ACQUIRE 1
#define ARM64_WORKAROUND_845719 2
#define ARM64_HAS_SYSREG_GIC_CPUIF 3
#define ARM64_HAS_PAN 4
#define ARM64_HAS_LSE_ATOMICS 5
#define ARM64_WORKAROUND_CAVIUM_23154 6
#define ARM64_WORKAROUND_834220 7
#define ARM64_HAS_NO_HW_PREFETCH 8
#define ARM64_HAS_UAO 9
#define ARM64_ALT_PAN_NOT_UAO 10
#define ARM64_HAS_VIRT_HOST_EXTN 11
#define ARM64_WORKAROUND_CAVIUM_27456 12
#define ARM64_HAS_32BIT_EL0 13
#define ARM64_HYP_OFFSET_LOW 14
#define ARM64_MISMATCHED_CACHE_LINE_SIZE 15
#define ARM64_NCAPS 16
#ifndef __ASSEMBLY__
#include <linux/kernel.h>

View File

@ -54,6 +54,7 @@ extern char __kvm_hyp_vector[];
extern void __kvm_flush_vm_context(void);
extern void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa);
extern void __kvm_tlb_flush_vmid(struct kvm *kvm);
extern void __kvm_tlb_flush_local_vmid(struct kvm_vcpu *vcpu);
extern int __kvm_vcpu_run(struct kvm_vcpu *vcpu);

View File

@ -62,6 +62,9 @@ struct kvm_arch {
/* VTTBR value associated with above pgd and vmid */
u64 vttbr;
/* The last vcpu id that ran on each physical CPU */
int __percpu *last_vcpu_ran;
/* The maximum number of vCPUs depends on the used GIC model */
int max_vcpus;

View File

@ -128,7 +128,7 @@ static inline unsigned long __kern_hyp_va(unsigned long v)
return v;
}
#define kern_hyp_va(v) (typeof(v))(__kern_hyp_va((unsigned long)(v)))
#define kern_hyp_va(v) ((typeof(v))(__kern_hyp_va((unsigned long)(v))))
/*
* We currently only support a 40bit IPA.

View File

@ -5,7 +5,6 @@
#include <linux/stringify.h>
#include <asm/alternative.h>
#include <asm/cpufeature.h>
#ifdef __ASSEMBLER__

View File

@ -46,7 +46,15 @@
#define ARMV8_PMU_EVTYPE_MASK 0xc800ffff /* Mask for writable bits */
#define ARMV8_PMU_EVTYPE_EVENT 0xffff /* Mask for EVENT bits */
#define ARMV8_PMU_EVTYPE_EVENT_SW_INCR 0 /* Software increment event */
/*
* PMUv3 event types: required events
*/
#define ARMV8_PMUV3_PERFCTR_SW_INCR 0x00
#define ARMV8_PMUV3_PERFCTR_L1D_CACHE_REFILL 0x03
#define ARMV8_PMUV3_PERFCTR_L1D_CACHE 0x04
#define ARMV8_PMUV3_PERFCTR_BR_MIS_PRED 0x10
#define ARMV8_PMUV3_PERFCTR_CPU_CYCLES 0x11
#define ARMV8_PMUV3_PERFCTR_BR_PRED 0x12
/*
* Event filters for PMUv3

View File

@ -31,17 +31,9 @@
/*
* ARMv8 PMUv3 Performance Events handling code.
* Common event types.
* Common event types (some are defined in asm/perf_event.h).
*/
/* Required events. */
#define ARMV8_PMUV3_PERFCTR_SW_INCR 0x00
#define ARMV8_PMUV3_PERFCTR_L1D_CACHE_REFILL 0x03
#define ARMV8_PMUV3_PERFCTR_L1D_CACHE 0x04
#define ARMV8_PMUV3_PERFCTR_BR_MIS_PRED 0x10
#define ARMV8_PMUV3_PERFCTR_CPU_CYCLES 0x11
#define ARMV8_PMUV3_PERFCTR_BR_PRED 0x12
/* At least one of the following is required. */
#define ARMV8_PMUV3_PERFCTR_INST_RETIRED 0x08
#define ARMV8_PMUV3_PERFCTR_INST_SPEC 0x1B

View File

@ -64,6 +64,21 @@ void __hyp_text __kvm_tlb_flush_vmid(struct kvm *kvm)
write_sysreg(0, vttbr_el2);
}
void __hyp_text __kvm_tlb_flush_local_vmid(struct kvm_vcpu *vcpu)
{
struct kvm *kvm = kern_hyp_va(kern_hyp_va(vcpu)->kvm);
/* Switch to requested VMID */
write_sysreg(kvm->arch.vttbr, vttbr_el2);
isb();
asm volatile("tlbi vmalle1" : : );
dsb(nsh);
isb();
write_sysreg(0, vttbr_el2);
}
void __hyp_text __kvm_flush_vm_context(void)
{
dsb(ishst);

View File

@ -597,8 +597,14 @@ static bool access_pmu_evcntr(struct kvm_vcpu *vcpu,
idx = ARMV8_PMU_CYCLE_IDX;
} else {
BUG();
return false;
}
} else if (r->CRn == 0 && r->CRm == 9) {
/* PMCCNTR */
if (pmu_access_event_counter_el0_disabled(vcpu))
return false;
idx = ARMV8_PMU_CYCLE_IDX;
} else if (r->CRn == 14 && (r->CRm & 12) == 8) {
/* PMEVCNTRn_EL0 */
if (pmu_access_event_counter_el0_disabled(vcpu))
@ -606,7 +612,7 @@ static bool access_pmu_evcntr(struct kvm_vcpu *vcpu,
idx = ((r->CRm & 3) << 3) | (r->Op2 & 7);
} else {
BUG();
return false;
}
if (!pmu_counter_idx_valid(vcpu, idx))

View File

@ -263,7 +263,7 @@ KBUILD_CPPFLAGS += -DDATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0)
bootvars-y = VMLINUX_LOAD_ADDRESS=$(load-y) \
VMLINUX_ENTRY_ADDRESS=$(entry-y) \
PLATFORM=$(platform-y)
PLATFORM="$(platform-y)"
ifdef CONFIG_32BIT
bootvars-y += ADDR_BITS=32
endif

View File

@ -84,12 +84,13 @@
fpga_regs: system-controller@1f000000 {
compatible = "mti,malta-fpga", "syscon", "simple-mfd";
reg = <0x1f000000 0x1000>;
native-endian;
reboot {
compatible = "syscon-reboot";
regmap = <&fpga_regs>;
offset = <0x500>;
mask = <0x4d>;
mask = <0x42>;
};
};

View File

@ -29,10 +29,20 @@ static __initdata const struct mips_machine *mach;
static __initdata const void *mach_match_data;
void __init prom_init(void)
{
plat_get_fdt();
BUG_ON(!fdt);
}
void __init *plat_get_fdt(void)
{
const struct mips_machine *check_mach;
const struct of_device_id *match;
if (fdt)
/* Already set up */
return (void *)fdt;
if ((fw_arg0 == -2) && !fdt_check_header((void *)fw_arg1)) {
/*
* We booted using the UHI boot protocol, so we have been
@ -75,12 +85,6 @@ void __init prom_init(void)
/* Retrieve the machine's FDT */
fdt = mach->fdt;
}
BUG_ON(!fdt);
}
void __init *plat_get_fdt(void)
{
return (void *)fdt;
}

View File

@ -63,6 +63,8 @@ do { \
extern int fpu_emulator_cop1Handler(struct pt_regs *xcp,
struct mips_fpu_struct *ctx, int has_fpu,
void *__user *fault_addr);
void force_fcr31_sig(unsigned long fcr31, void __user *fault_addr,
struct task_struct *tsk);
int process_fpemu_return(int sig, void __user *fault_addr,
unsigned long fcr31);
int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn,
@ -81,4 +83,15 @@ static inline void fpu_emulator_init_fpu(void)
set_fpr64(&t->thread.fpu.fpr[i], 0, SIGNALLING_NAN);
}
/*
* Mask the FCSR Cause bits according to the Enable bits, observing
* that Unimplemented is always enabled.
*/
static inline unsigned long mask_fcr31_x(unsigned long fcr31)
{
return fcr31 & (FPU_CSR_UNI_X |
((fcr31 & FPU_CSR_ALL_E) <<
(ffs(FPU_CSR_ALL_X) - ffs(FPU_CSR_ALL_E))));
}
#endif /* _ASM_FPU_EMULATOR_H */

View File

@ -293,7 +293,10 @@ struct kvm_vcpu_arch {
/* Host KSEG0 address of the EI/DI offset */
void *kseg0_commpage;
u32 io_gpr; /* GPR used as IO source/target */
/* Resume PC after MMIO completion */
unsigned long io_pc;
/* GPR used as IO source/target */
u32 io_gpr;
struct hrtimer comparecount_timer;
/* Count timer control KVM register */
@ -315,8 +318,6 @@ struct kvm_vcpu_arch {
/* Bitmask of pending exceptions to be cleared */
unsigned long pending_exceptions_clr;
u32 pending_load_cause;
/* Save/Restore the entryhi register when are are preempted/scheduled back in */
unsigned long preempt_entryhi;

View File

@ -75,6 +75,22 @@ do { if (cpu_has_rw_llb) { \
} \
} while (0)
/*
* Check FCSR for any unmasked exceptions pending set with `ptrace',
* clear them and send a signal.
*/
#define __sanitize_fcr31(next) \
do { \
unsigned long fcr31 = mask_fcr31_x(next->thread.fpu.fcr31); \
void __user *pc; \
\
if (unlikely(fcr31)) { \
pc = (void __user *)task_pt_regs(next)->cp0_epc; \
next->thread.fpu.fcr31 &= ~fcr31; \
force_fcr31_sig(fcr31, pc, next); \
} \
} while (0)
/*
* For newly created kernel threads switch_to() will return to
* ret_from_kernel_thread, newly created user threads to ret_from_fork.
@ -85,6 +101,8 @@ do { if (cpu_has_rw_llb) { \
do { \
__mips_mt_fpaff_switch_to(prev); \
lose_fpu_inatomic(1, prev); \
if (tsk_used_math(next)) \
__sanitize_fcr31(next); \
if (cpu_has_dsp) { \
__save_dsp(prev); \
__restore_dsp(next); \

View File

@ -21,6 +21,11 @@ static DEFINE_PER_CPU_ALIGNED(spinlock_t, cpc_core_lock);
static DEFINE_PER_CPU_ALIGNED(unsigned long, cpc_core_lock_flags);
phys_addr_t __weak mips_cpc_default_phys_base(void)
{
return 0;
}
/**
* mips_cpc_phys_base - retrieve the physical base address of the CPC
*
@ -43,8 +48,12 @@ static phys_addr_t mips_cpc_phys_base(void)
if (cpc_base & CM_GCR_CPC_BASE_CPCEN_MSK)
return cpc_base & CM_GCR_CPC_BASE_CPCBASE_MSK;
/* Otherwise, give it the default address & enable it */
/* Otherwise, use the default address */
cpc_base = mips_cpc_default_phys_base();
if (!cpc_base)
return cpc_base;
/* Enable the CPC, mapped at the default address */
write_gcr_cpc_base(cpc_base | CM_GCR_CPC_BASE_CPCEN_MSK);
return cpc_base;
}

View File

@ -899,7 +899,7 @@ static inline int mipsr2_find_op_func(struct pt_regs *regs, u32 inst,
* mipsr2_decoder: Decode and emulate a MIPS R2 instruction
* @regs: Process register set
* @inst: Instruction to decode and emulate
* @fcr31: Floating Point Control and Status Register returned
* @fcr31: Floating Point Control and Status Register Cause bits returned
*/
int mipsr2_decoder(struct pt_regs *regs, u32 inst, unsigned long *fcr31)
{
@ -1172,13 +1172,13 @@ fpu_emul:
err = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 0,
&fault_addr);
*fcr31 = current->thread.fpu.fcr31;
/*
* We can't allow the emulated instruction to leave any of
* the cause bits set in $fcr31.
* We can't allow the emulated instruction to leave any
* enabled Cause bits set in $fcr31.
*/
current->thread.fpu.fcr31 &= ~FPU_CSR_ALL_X;
*fcr31 = res = mask_fcr31_x(current->thread.fpu.fcr31);
current->thread.fpu.fcr31 &= ~res;
/*
* this is a tricky issue - lose_fpu() uses LL/SC atomics

View File

@ -79,16 +79,15 @@ void ptrace_disable(struct task_struct *child)
}
/*
* Poke at FCSR according to its mask. Don't set the cause bits as
* this is currently not handled correctly in FP context restoration
* and will cause an oops if a corresponding enable bit is set.
* Poke at FCSR according to its mask. Set the Cause bits even
* if a corresponding Enable bit is set. This will be noticed at
* the time the thread is switched to and SIGFPE thrown accordingly.
*/
static void ptrace_setfcr31(struct task_struct *child, u32 value)
{
u32 fcr31;
u32 mask;
value &= ~FPU_CSR_ALL_X;
fcr31 = child->thread.fpu.fcr31;
mask = boot_cpu_data.fpu_msk31;
child->thread.fpu.fcr31 = (value & ~mask) | (fcr31 & mask);
@ -817,6 +816,7 @@ long arch_ptrace(struct task_struct *child, long request,
break;
#endif
case FPC_CSR:
init_fp_ctx(child);
ptrace_setfcr31(child, data);
break;
case DSP_BASE ... DSP_BASE + 5: {

View File

@ -19,108 +19,86 @@
#include <asm/regdef.h>
#define EX(a,b) \
9: a,##b; \
.section __ex_table,"a"; \
PTR 9b,fault; \
.previous
#define EX2(a,b) \
9: a,##b; \
.section __ex_table,"a"; \
PTR 9b,bad_stack; \
PTR 9b+4,bad_stack; \
.previous
.set noreorder
.set mips1
/* Save floating point context */
/**
* _save_fp_context() - save FP context from the FPU
* @a0 - pointer to fpregs field of sigcontext
* @a1 - pointer to fpc_csr field of sigcontext
*
* Save FP context, including the 32 FP data registers and the FP
* control & status register, from the FPU to signal context.
*/
LEAF(_save_fp_context)
.set push
SET_HARDFLOAT
li v0, 0 # assume success
cfc1 t1,fcr31
EX(swc1 $f0,(SC_FPREGS+0)(a0))
EX(swc1 $f1,(SC_FPREGS+8)(a0))
EX(swc1 $f2,(SC_FPREGS+16)(a0))
EX(swc1 $f3,(SC_FPREGS+24)(a0))
EX(swc1 $f4,(SC_FPREGS+32)(a0))
EX(swc1 $f5,(SC_FPREGS+40)(a0))
EX(swc1 $f6,(SC_FPREGS+48)(a0))
EX(swc1 $f7,(SC_FPREGS+56)(a0))
EX(swc1 $f8,(SC_FPREGS+64)(a0))
EX(swc1 $f9,(SC_FPREGS+72)(a0))
EX(swc1 $f10,(SC_FPREGS+80)(a0))
EX(swc1 $f11,(SC_FPREGS+88)(a0))
EX(swc1 $f12,(SC_FPREGS+96)(a0))
EX(swc1 $f13,(SC_FPREGS+104)(a0))
EX(swc1 $f14,(SC_FPREGS+112)(a0))
EX(swc1 $f15,(SC_FPREGS+120)(a0))
EX(swc1 $f16,(SC_FPREGS+128)(a0))
EX(swc1 $f17,(SC_FPREGS+136)(a0))
EX(swc1 $f18,(SC_FPREGS+144)(a0))
EX(swc1 $f19,(SC_FPREGS+152)(a0))
EX(swc1 $f20,(SC_FPREGS+160)(a0))
EX(swc1 $f21,(SC_FPREGS+168)(a0))
EX(swc1 $f22,(SC_FPREGS+176)(a0))
EX(swc1 $f23,(SC_FPREGS+184)(a0))
EX(swc1 $f24,(SC_FPREGS+192)(a0))
EX(swc1 $f25,(SC_FPREGS+200)(a0))
EX(swc1 $f26,(SC_FPREGS+208)(a0))
EX(swc1 $f27,(SC_FPREGS+216)(a0))
EX(swc1 $f28,(SC_FPREGS+224)(a0))
EX(swc1 $f29,(SC_FPREGS+232)(a0))
EX(swc1 $f30,(SC_FPREGS+240)(a0))
EX(swc1 $f31,(SC_FPREGS+248)(a0))
EX(sw t1,(SC_FPC_CSR)(a0))
cfc1 t0,$0 # implementation/version
cfc1 t1, fcr31
EX2(s.d $f0, 0(a0))
EX2(s.d $f2, 16(a0))
EX2(s.d $f4, 32(a0))
EX2(s.d $f6, 48(a0))
EX2(s.d $f8, 64(a0))
EX2(s.d $f10, 80(a0))
EX2(s.d $f12, 96(a0))
EX2(s.d $f14, 112(a0))
EX2(s.d $f16, 128(a0))
EX2(s.d $f18, 144(a0))
EX2(s.d $f20, 160(a0))
EX2(s.d $f22, 176(a0))
EX2(s.d $f24, 192(a0))
EX2(s.d $f26, 208(a0))
EX2(s.d $f28, 224(a0))
EX2(s.d $f30, 240(a0))
jr ra
EX(sw t1, (a1))
.set pop
.set nomacro
EX(sw t0,(SC_FPC_EIR)(a0))
.set macro
END(_save_fp_context)
/*
* Restore FPU state:
* - fp gp registers
* - cp1 status/control register
/**
* _restore_fp_context() - restore FP context to the FPU
* @a0 - pointer to fpregs field of sigcontext
* @a1 - pointer to fpc_csr field of sigcontext
*
* We base the decision which registers to restore from the signal stack
* frame on the current content of c0_status, not on the content of the
* stack frame which might have been changed by the user.
* Restore FP context, including the 32 FP data registers and the FP
* control & status register, from signal context to the FPU.
*/
LEAF(_restore_fp_context)
.set push
SET_HARDFLOAT
li v0, 0 # assume success
EX(lw t0,(SC_FPC_CSR)(a0))
EX(lwc1 $f0,(SC_FPREGS+0)(a0))
EX(lwc1 $f1,(SC_FPREGS+8)(a0))
EX(lwc1 $f2,(SC_FPREGS+16)(a0))
EX(lwc1 $f3,(SC_FPREGS+24)(a0))
EX(lwc1 $f4,(SC_FPREGS+32)(a0))
EX(lwc1 $f5,(SC_FPREGS+40)(a0))
EX(lwc1 $f6,(SC_FPREGS+48)(a0))
EX(lwc1 $f7,(SC_FPREGS+56)(a0))
EX(lwc1 $f8,(SC_FPREGS+64)(a0))
EX(lwc1 $f9,(SC_FPREGS+72)(a0))
EX(lwc1 $f10,(SC_FPREGS+80)(a0))
EX(lwc1 $f11,(SC_FPREGS+88)(a0))
EX(lwc1 $f12,(SC_FPREGS+96)(a0))
EX(lwc1 $f13,(SC_FPREGS+104)(a0))
EX(lwc1 $f14,(SC_FPREGS+112)(a0))
EX(lwc1 $f15,(SC_FPREGS+120)(a0))
EX(lwc1 $f16,(SC_FPREGS+128)(a0))
EX(lwc1 $f17,(SC_FPREGS+136)(a0))
EX(lwc1 $f18,(SC_FPREGS+144)(a0))
EX(lwc1 $f19,(SC_FPREGS+152)(a0))
EX(lwc1 $f20,(SC_FPREGS+160)(a0))
EX(lwc1 $f21,(SC_FPREGS+168)(a0))
EX(lwc1 $f22,(SC_FPREGS+176)(a0))
EX(lwc1 $f23,(SC_FPREGS+184)(a0))
EX(lwc1 $f24,(SC_FPREGS+192)(a0))
EX(lwc1 $f25,(SC_FPREGS+200)(a0))
EX(lwc1 $f26,(SC_FPREGS+208)(a0))
EX(lwc1 $f27,(SC_FPREGS+216)(a0))
EX(lwc1 $f28,(SC_FPREGS+224)(a0))
EX(lwc1 $f29,(SC_FPREGS+232)(a0))
EX(lwc1 $f30,(SC_FPREGS+240)(a0))
EX(lwc1 $f31,(SC_FPREGS+248)(a0))
EX(lw t0, (a1))
EX2(l.d $f0, 0(a0))
EX2(l.d $f2, 16(a0))
EX2(l.d $f4, 32(a0))
EX2(l.d $f6, 48(a0))
EX2(l.d $f8, 64(a0))
EX2(l.d $f10, 80(a0))
EX2(l.d $f12, 96(a0))
EX2(l.d $f14, 112(a0))
EX2(l.d $f16, 128(a0))
EX2(l.d $f18, 144(a0))
EX2(l.d $f20, 160(a0))
EX2(l.d $f22, 176(a0))
EX2(l.d $f24, 192(a0))
EX2(l.d $f26, 208(a0))
EX2(l.d $f28, 224(a0))
EX2(l.d $f30, 240(a0))
jr ra
ctc1 t0,fcr31
ctc1 t0, fcr31
.set pop
END(_restore_fp_context)
.set reorder

View File

@ -21,7 +21,14 @@
.set push
SET_HARDFLOAT
/* Save floating point context */
/**
* _save_fp_context() - save FP context from the FPU
* @a0 - pointer to fpregs field of sigcontext
* @a1 - pointer to fpc_csr field of sigcontext
*
* Save FP context, including the 32 FP data registers and the FP
* control & status register, from the FPU to signal context.
*/
LEAF(_save_fp_context)
mfc0 t0,CP0_STATUS
sll t0,t0,2
@ -30,59 +37,59 @@
cfc1 t1,fcr31
/* Store the 16 double precision registers */
sdc1 $f0,(SC_FPREGS+0)(a0)
sdc1 $f2,(SC_FPREGS+16)(a0)
sdc1 $f4,(SC_FPREGS+32)(a0)
sdc1 $f6,(SC_FPREGS+48)(a0)
sdc1 $f8,(SC_FPREGS+64)(a0)
sdc1 $f10,(SC_FPREGS+80)(a0)
sdc1 $f12,(SC_FPREGS+96)(a0)
sdc1 $f14,(SC_FPREGS+112)(a0)
sdc1 $f16,(SC_FPREGS+128)(a0)
sdc1 $f18,(SC_FPREGS+144)(a0)
sdc1 $f20,(SC_FPREGS+160)(a0)
sdc1 $f22,(SC_FPREGS+176)(a0)
sdc1 $f24,(SC_FPREGS+192)(a0)
sdc1 $f26,(SC_FPREGS+208)(a0)
sdc1 $f28,(SC_FPREGS+224)(a0)
sdc1 $f30,(SC_FPREGS+240)(a0)
sdc1 $f0,0(a0)
sdc1 $f2,16(a0)
sdc1 $f4,32(a0)
sdc1 $f6,48(a0)
sdc1 $f8,64(a0)
sdc1 $f10,80(a0)
sdc1 $f12,96(a0)
sdc1 $f14,112(a0)
sdc1 $f16,128(a0)
sdc1 $f18,144(a0)
sdc1 $f20,160(a0)
sdc1 $f22,176(a0)
sdc1 $f24,192(a0)
sdc1 $f26,208(a0)
sdc1 $f28,224(a0)
sdc1 $f30,240(a0)
jr ra
sw t0,SC_FPC_CSR(a0)
sw t0,(a1)
1: jr ra
nop
END(_save_fp_context)
/* Restore FPU state:
* - fp gp registers
* - cp1 status/control register
/**
* _restore_fp_context() - restore FP context to the FPU
* @a0 - pointer to fpregs field of sigcontext
* @a1 - pointer to fpc_csr field of sigcontext
*
* We base the decision which registers to restore from the signal stack
* frame on the current content of c0_status, not on the content of the
* stack frame which might have been changed by the user.
* Restore FP context, including the 32 FP data registers and the FP
* control & status register, from signal context to the FPU.
*/
LEAF(_restore_fp_context)
mfc0 t0,CP0_STATUS
sll t0,t0,2
bgez t0,1f
lw t0,SC_FPC_CSR(a0)
lw t0,(a1)
/* Restore the 16 double precision registers */
ldc1 $f0,(SC_FPREGS+0)(a0)
ldc1 $f2,(SC_FPREGS+16)(a0)
ldc1 $f4,(SC_FPREGS+32)(a0)
ldc1 $f6,(SC_FPREGS+48)(a0)
ldc1 $f8,(SC_FPREGS+64)(a0)
ldc1 $f10,(SC_FPREGS+80)(a0)
ldc1 $f12,(SC_FPREGS+96)(a0)
ldc1 $f14,(SC_FPREGS+112)(a0)
ldc1 $f16,(SC_FPREGS+128)(a0)
ldc1 $f18,(SC_FPREGS+144)(a0)
ldc1 $f20,(SC_FPREGS+160)(a0)
ldc1 $f22,(SC_FPREGS+176)(a0)
ldc1 $f24,(SC_FPREGS+192)(a0)
ldc1 $f26,(SC_FPREGS+208)(a0)
ldc1 $f28,(SC_FPREGS+224)(a0)
ldc1 $f30,(SC_FPREGS+240)(a0)
ldc1 $f0,0(a0)
ldc1 $f2,16(a0)
ldc1 $f4,32(a0)
ldc1 $f6,48(a0)
ldc1 $f8,64(a0)
ldc1 $f10,80(a0)
ldc1 $f12,96(a0)
ldc1 $f14,112(a0)
ldc1 $f16,128(a0)
ldc1 $f18,144(a0)
ldc1 $f20,160(a0)
ldc1 $f22,176(a0)
ldc1 $f24,192(a0)
ldc1 $f26,208(a0)
ldc1 $f28,224(a0)
ldc1 $f30,240(a0)
jr ra
ctc1 t0,fcr31
1: jr ra

View File

@ -200,7 +200,7 @@ static inline __init unsigned long get_random_boot(void)
#if defined(CONFIG_USE_OF)
/* Get any additional entropy passed in device tree */
{
if (initial_boot_params) {
int node, len;
u64 *prop;

View File

@ -368,6 +368,19 @@ static void __init bootmem_init(void)
end = PFN_DOWN(boot_mem_map.map[i].addr
+ boot_mem_map.map[i].size);
#ifndef CONFIG_HIGHMEM
/*
* Skip highmem here so we get an accurate max_low_pfn if low
* memory stops short of high memory.
* If the region overlaps HIGHMEM_START, end is clipped so
* max_pfn excludes the highmem portion.
*/
if (start >= PFN_DOWN(HIGHMEM_START))
continue;
if (end > PFN_DOWN(HIGHMEM_START))
end = PFN_DOWN(HIGHMEM_START);
#endif
if (end > max_low_pfn)
max_low_pfn = end;
if (start < min_low_pfn)

View File

@ -156,7 +156,7 @@ static void show_backtrace(struct task_struct *task, const struct pt_regs *regs)
print_ip_sym(pc);
pc = unwind_stack(task, &sp, pc, &ra);
} while (pc);
printk("\n");
pr_cont("\n");
}
/*
@ -174,22 +174,24 @@ static void show_stacktrace(struct task_struct *task,
printk("Stack :");
i = 0;
while ((unsigned long) sp & (PAGE_SIZE - 1)) {
if (i && ((i % (64 / field)) == 0))
printk("\n ");
if (i && ((i % (64 / field)) == 0)) {
pr_cont("\n");
printk(" ");
}
if (i > 39) {
printk(" ...");
pr_cont(" ...");
break;
}
if (__get_user(stackdata, sp++)) {
printk(" (Bad stack address)");
pr_cont(" (Bad stack address)");
break;
}
printk(" %0*lx", field, stackdata);
pr_cont(" %0*lx", field, stackdata);
i++;
}
printk("\n");
pr_cont("\n");
show_backtrace(task, regs);
}
@ -229,18 +231,19 @@ static void show_code(unsigned int __user *pc)
long i;
unsigned short __user *pc16 = NULL;
printk("\nCode:");
printk("Code:");
if ((unsigned long)pc & 1)
pc16 = (unsigned short __user *)((unsigned long)pc & ~1);
for(i = -3 ; i < 6 ; i++) {
unsigned int insn;
if (pc16 ? __get_user(insn, pc16 + i) : __get_user(insn, pc + i)) {
printk(" (Bad address in epc)\n");
pr_cont(" (Bad address in epc)\n");
break;
}
printk("%c%0*x%c", (i?' ':'<'), pc16 ? 4 : 8, insn, (i?' ':'>'));
pr_cont("%c%0*x%c", (i?' ':'<'), pc16 ? 4 : 8, insn, (i?' ':'>'));
}
pr_cont("\n");
}
static void __show_regs(const struct pt_regs *regs)
@ -259,15 +262,15 @@ static void __show_regs(const struct pt_regs *regs)
if ((i % 4) == 0)
printk("$%2d :", i);
if (i == 0)
printk(" %0*lx", field, 0UL);
pr_cont(" %0*lx", field, 0UL);
else if (i == 26 || i == 27)
printk(" %*s", field, "");
pr_cont(" %*s", field, "");
else
printk(" %0*lx", field, regs->regs[i]);
pr_cont(" %0*lx", field, regs->regs[i]);
i++;
if ((i % 4) == 0)
printk("\n");
pr_cont("\n");
}
#ifdef CONFIG_CPU_HAS_SMARTMIPS
@ -288,46 +291,46 @@ static void __show_regs(const struct pt_regs *regs)
if (cpu_has_3kex) {
if (regs->cp0_status & ST0_KUO)
printk("KUo ");
pr_cont("KUo ");
if (regs->cp0_status & ST0_IEO)
printk("IEo ");
pr_cont("IEo ");
if (regs->cp0_status & ST0_KUP)
printk("KUp ");
pr_cont("KUp ");
if (regs->cp0_status & ST0_IEP)
printk("IEp ");
pr_cont("IEp ");
if (regs->cp0_status & ST0_KUC)
printk("KUc ");
pr_cont("KUc ");
if (regs->cp0_status & ST0_IEC)
printk("IEc ");
pr_cont("IEc ");
} else if (cpu_has_4kex) {
if (regs->cp0_status & ST0_KX)
printk("KX ");
pr_cont("KX ");
if (regs->cp0_status & ST0_SX)
printk("SX ");
pr_cont("SX ");
if (regs->cp0_status & ST0_UX)
printk("UX ");
pr_cont("UX ");
switch (regs->cp0_status & ST0_KSU) {
case KSU_USER:
printk("USER ");
pr_cont("USER ");
break;
case KSU_SUPERVISOR:
printk("SUPERVISOR ");
pr_cont("SUPERVISOR ");
break;
case KSU_KERNEL:
printk("KERNEL ");
pr_cont("KERNEL ");
break;
default:
printk("BAD_MODE ");
pr_cont("BAD_MODE ");
break;
}
if (regs->cp0_status & ST0_ERL)
printk("ERL ");
pr_cont("ERL ");
if (regs->cp0_status & ST0_EXL)
printk("EXL ");
pr_cont("EXL ");
if (regs->cp0_status & ST0_IE)
printk("IE ");
pr_cont("IE ");
}
printk("\n");
pr_cont("\n");
exccode = (cause & CAUSEF_EXCCODE) >> CAUSEB_EXCCODE;
printk("Cause : %08x (ExcCode %02x)\n", cause, exccode);
@ -705,6 +708,32 @@ asmlinkage void do_ov(struct pt_regs *regs)
exception_exit(prev_state);
}
/*
* Send SIGFPE according to FCSR Cause bits, which must have already
* been masked against Enable bits. This is impotant as Inexact can
* happen together with Overflow or Underflow, and `ptrace' can set
* any bits.
*/
void force_fcr31_sig(unsigned long fcr31, void __user *fault_addr,
struct task_struct *tsk)
{
struct siginfo si = { .si_addr = fault_addr, .si_signo = SIGFPE };
if (fcr31 & FPU_CSR_INV_X)
si.si_code = FPE_FLTINV;
else if (fcr31 & FPU_CSR_DIV_X)
si.si_code = FPE_FLTDIV;
else if (fcr31 & FPU_CSR_OVF_X)
si.si_code = FPE_FLTOVF;
else if (fcr31 & FPU_CSR_UDF_X)
si.si_code = FPE_FLTUND;
else if (fcr31 & FPU_CSR_INE_X)
si.si_code = FPE_FLTRES;
else
si.si_code = __SI_FAULT;
force_sig_info(SIGFPE, &si, tsk);
}
int process_fpemu_return(int sig, void __user *fault_addr, unsigned long fcr31)
{
struct siginfo si = { 0 };
@ -715,27 +744,7 @@ int process_fpemu_return(int sig, void __user *fault_addr, unsigned long fcr31)
return 0;
case SIGFPE:
si.si_addr = fault_addr;
si.si_signo = sig;
/*
* Inexact can happen together with Overflow or Underflow.
* Respect the mask to deliver the correct exception.
*/
fcr31 &= (fcr31 & FPU_CSR_ALL_E) <<
(ffs(FPU_CSR_ALL_X) - ffs(FPU_CSR_ALL_E));
if (fcr31 & FPU_CSR_INV_X)
si.si_code = FPE_FLTINV;
else if (fcr31 & FPU_CSR_DIV_X)
si.si_code = FPE_FLTDIV;
else if (fcr31 & FPU_CSR_OVF_X)
si.si_code = FPE_FLTOVF;
else if (fcr31 & FPU_CSR_UDF_X)
si.si_code = FPE_FLTUND;
else if (fcr31 & FPU_CSR_INE_X)
si.si_code = FPE_FLTRES;
else
si.si_code = __SI_FAULT;
force_sig_info(sig, &si, current);
force_fcr31_sig(fcr31, fault_addr, current);
return 1;
case SIGBUS:
@ -799,13 +808,13 @@ static int simulate_fp(struct pt_regs *regs, unsigned int opcode,
/* Run the emulator */
sig = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 1,
&fault_addr);
fcr31 = current->thread.fpu.fcr31;
/*
* We can't allow the emulated instruction to leave any of
* the cause bits set in $fcr31.
* We can't allow the emulated instruction to leave any
* enabled Cause bits set in $fcr31.
*/
current->thread.fpu.fcr31 &= ~FPU_CSR_ALL_X;
fcr31 = mask_fcr31_x(current->thread.fpu.fcr31);
current->thread.fpu.fcr31 &= ~fcr31;
/* Restore the hardware register state */
own_fpu(1);
@ -831,7 +840,7 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
goto out;
/* Clear FCSR.Cause before enabling interrupts */
write_32bit_cp1_register(CP1_STATUS, fcr31 & ~FPU_CSR_ALL_X);
write_32bit_cp1_register(CP1_STATUS, fcr31 & ~mask_fcr31_x(fcr31));
local_irq_enable();
die_if_kernel("FP exception in kernel code", regs);
@ -853,13 +862,13 @@ asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
/* Run the emulator */
sig = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 1,
&fault_addr);
fcr31 = current->thread.fpu.fcr31;
/*
* We can't allow the emulated instruction to leave any of
* the cause bits set in $fcr31.
* We can't allow the emulated instruction to leave any
* enabled Cause bits set in $fcr31.
*/
current->thread.fpu.fcr31 &= ~FPU_CSR_ALL_X;
fcr31 = mask_fcr31_x(current->thread.fpu.fcr31);
current->thread.fpu.fcr31 &= ~fcr31;
/* Restore the hardware register state */
own_fpu(1); /* Using the FPU again. */
@ -1424,13 +1433,13 @@ asmlinkage void do_cpu(struct pt_regs *regs)
sig = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 0,
&fault_addr);
fcr31 = current->thread.fpu.fcr31;
/*
* We can't allow the emulated instruction to leave
* any of the cause bits set in $fcr31.
* any enabled Cause bits set in $fcr31.
*/
current->thread.fpu.fcr31 &= ~FPU_CSR_ALL_X;
fcr31 = mask_fcr31_x(current->thread.fpu.fcr31);
current->thread.fpu.fcr31 &= ~fcr31;
/* Send a signal if required. */
if (!process_fpemu_return(sig, fault_addr, fcr31) && !err)

View File

@ -790,15 +790,15 @@ enum emulation_result kvm_mips_emul_eret(struct kvm_vcpu *vcpu)
struct mips_coproc *cop0 = vcpu->arch.cop0;
enum emulation_result er = EMULATE_DONE;
if (kvm_read_c0_guest_status(cop0) & ST0_EXL) {
if (kvm_read_c0_guest_status(cop0) & ST0_ERL) {
kvm_clear_c0_guest_status(cop0, ST0_ERL);
vcpu->arch.pc = kvm_read_c0_guest_errorepc(cop0);
} else if (kvm_read_c0_guest_status(cop0) & ST0_EXL) {
kvm_debug("[%#lx] ERET to %#lx\n", vcpu->arch.pc,
kvm_read_c0_guest_epc(cop0));
kvm_clear_c0_guest_status(cop0, ST0_EXL);
vcpu->arch.pc = kvm_read_c0_guest_epc(cop0);
} else if (kvm_read_c0_guest_status(cop0) & ST0_ERL) {
kvm_clear_c0_guest_status(cop0, ST0_ERL);
vcpu->arch.pc = kvm_read_c0_guest_errorepc(cop0);
} else {
kvm_err("[%#lx] ERET when MIPS_SR_EXL|MIPS_SR_ERL == 0\n",
vcpu->arch.pc);
@ -1528,13 +1528,25 @@ enum emulation_result kvm_mips_emulate_load(union mips_instruction inst,
struct kvm_vcpu *vcpu)
{
enum emulation_result er = EMULATE_DO_MMIO;
unsigned long curr_pc;
u32 op, rt;
u32 bytes;
rt = inst.i_format.rt;
op = inst.i_format.opcode;
vcpu->arch.pending_load_cause = cause;
/*
* Find the resume PC now while we have safe and easy access to the
* prior branch instruction, and save it for
* kvm_mips_complete_mmio_load() to restore later.
*/
curr_pc = vcpu->arch.pc;
er = update_pc(vcpu, cause);
if (er == EMULATE_FAIL)
return er;
vcpu->arch.io_pc = vcpu->arch.pc;
vcpu->arch.pc = curr_pc;
vcpu->arch.io_gpr = rt;
switch (op) {
@ -2494,9 +2506,8 @@ enum emulation_result kvm_mips_complete_mmio_load(struct kvm_vcpu *vcpu,
goto done;
}
er = update_pc(vcpu, vcpu->arch.pending_load_cause);
if (er == EMULATE_FAIL)
return er;
/* Restore saved resume PC */
vcpu->arch.pc = vcpu->arch.io_pc;
switch (run->mmio.len) {
case 4:
@ -2518,11 +2529,6 @@ enum emulation_result kvm_mips_complete_mmio_load(struct kvm_vcpu *vcpu,
break;
}
if (vcpu->arch.pending_load_cause & CAUSEF_BD)
kvm_debug("[%#lx] Completing %d byte BD Load to gpr %d (0x%08lx) type %d\n",
vcpu->arch.pc, run->mmio.len, vcpu->arch.io_gpr, *gpr,
vcpu->mmio_needed);
done:
return er;
}

View File

@ -426,7 +426,7 @@ int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
static void kvm_mips_check_asids(struct kvm_vcpu *vcpu)
{
struct mips_coproc *cop0 = vcpu->arch.cop0;
int cpu = smp_processor_id();
int i, cpu = smp_processor_id();
unsigned int gasid;
/*
@ -442,6 +442,9 @@ static void kvm_mips_check_asids(struct kvm_vcpu *vcpu)
vcpu);
vcpu->arch.guest_user_asid[cpu] =
vcpu->arch.guest_user_mm.context.asid[cpu];
for_each_possible_cpu(i)
if (i != cpu)
vcpu->arch.guest_user_asid[cpu] = 0;
vcpu->arch.last_user_gasid = gasid;
}
}

View File

@ -260,13 +260,9 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
if ((vcpu->arch.guest_user_asid[cpu] ^ asid_cache(cpu)) &
asid_version_mask(cpu)) {
u32 gasid = kvm_read_c0_guest_entryhi(vcpu->arch.cop0) &
KVM_ENTRYHI_ASID;
kvm_get_new_mmu_context(&vcpu->arch.guest_user_mm, cpu, vcpu);
vcpu->arch.guest_user_asid[cpu] =
vcpu->arch.guest_user_mm.context.asid[cpu];
vcpu->arch.last_user_gasid = gasid;
newasid++;
kvm_debug("[%d]: cpu_context: %#lx\n", cpu,

View File

@ -135,42 +135,42 @@ static void dump_tlb(int first, int last)
c0 = (entrylo0 & ENTRYLO_C) >> ENTRYLO_C_SHIFT;
c1 = (entrylo1 & ENTRYLO_C) >> ENTRYLO_C_SHIFT;
printk("va=%0*lx asid=%0*lx",
vwidth, (entryhi & ~0x1fffUL),
asidwidth, entryhi & asidmask);
pr_cont("va=%0*lx asid=%0*lx",
vwidth, (entryhi & ~0x1fffUL),
asidwidth, entryhi & asidmask);
if (cpu_has_guestid)
printk(" gid=%02lx",
(guestctl1 & MIPS_GCTL1_RID)
pr_cont(" gid=%02lx",
(guestctl1 & MIPS_GCTL1_RID)
>> MIPS_GCTL1_RID_SHIFT);
/* RI/XI are in awkward places, so mask them off separately */
pa = entrylo0 & ~(MIPS_ENTRYLO_RI | MIPS_ENTRYLO_XI);
if (xpa)
pa |= (unsigned long long)readx_c0_entrylo0() << 30;
pa = (pa << 6) & PAGE_MASK;
printk("\n\t[");
pr_cont("\n\t[");
if (cpu_has_rixi)
printk("ri=%d xi=%d ",
(entrylo0 & MIPS_ENTRYLO_RI) ? 1 : 0,
(entrylo0 & MIPS_ENTRYLO_XI) ? 1 : 0);
printk("pa=%0*llx c=%d d=%d v=%d g=%d] [",
pwidth, pa, c0,
(entrylo0 & ENTRYLO_D) ? 1 : 0,
(entrylo0 & ENTRYLO_V) ? 1 : 0,
(entrylo0 & ENTRYLO_G) ? 1 : 0);
pr_cont("ri=%d xi=%d ",
(entrylo0 & MIPS_ENTRYLO_RI) ? 1 : 0,
(entrylo0 & MIPS_ENTRYLO_XI) ? 1 : 0);
pr_cont("pa=%0*llx c=%d d=%d v=%d g=%d] [",
pwidth, pa, c0,
(entrylo0 & ENTRYLO_D) ? 1 : 0,
(entrylo0 & ENTRYLO_V) ? 1 : 0,
(entrylo0 & ENTRYLO_G) ? 1 : 0);
/* RI/XI are in awkward places, so mask them off separately */
pa = entrylo1 & ~(MIPS_ENTRYLO_RI | MIPS_ENTRYLO_XI);
if (xpa)
pa |= (unsigned long long)readx_c0_entrylo1() << 30;
pa = (pa << 6) & PAGE_MASK;
if (cpu_has_rixi)
printk("ri=%d xi=%d ",
(entrylo1 & MIPS_ENTRYLO_RI) ? 1 : 0,
(entrylo1 & MIPS_ENTRYLO_XI) ? 1 : 0);
printk("pa=%0*llx c=%d d=%d v=%d g=%d]\n",
pwidth, pa, c1,
(entrylo1 & ENTRYLO_D) ? 1 : 0,
(entrylo1 & ENTRYLO_V) ? 1 : 0,
(entrylo1 & ENTRYLO_G) ? 1 : 0);
pr_cont("ri=%d xi=%d ",
(entrylo1 & MIPS_ENTRYLO_RI) ? 1 : 0,
(entrylo1 & MIPS_ENTRYLO_XI) ? 1 : 0);
pr_cont("pa=%0*llx c=%d d=%d v=%d g=%d]\n",
pwidth, pa, c1,
(entrylo1 & ENTRYLO_D) ? 1 : 0,
(entrylo1 & ENTRYLO_V) ? 1 : 0,
(entrylo1 & ENTRYLO_G) ? 1 : 0);
}
printk("\n");

View File

@ -53,15 +53,15 @@ static void dump_tlb(int first, int last)
*/
printk("Index: %2d ", i);
printk("va=%08lx asid=%08lx"
" [pa=%06lx n=%d d=%d v=%d g=%d]",
entryhi & PAGE_MASK,
entryhi & asid_mask,
entrylo0 & PAGE_MASK,
(entrylo0 & R3K_ENTRYLO_N) ? 1 : 0,
(entrylo0 & R3K_ENTRYLO_D) ? 1 : 0,
(entrylo0 & R3K_ENTRYLO_V) ? 1 : 0,
(entrylo0 & R3K_ENTRYLO_G) ? 1 : 0);
pr_cont("va=%08lx asid=%08lx"
" [pa=%06lx n=%d d=%d v=%d g=%d]",
entryhi & PAGE_MASK,
entryhi & asid_mask,
entrylo0 & PAGE_MASK,
(entrylo0 & R3K_ENTRYLO_N) ? 1 : 0,
(entrylo0 & R3K_ENTRYLO_D) ? 1 : 0,
(entrylo0 & R3K_ENTRYLO_V) ? 1 : 0,
(entrylo0 & R3K_ENTRYLO_G) ? 1 : 0);
}
}
printk("\n");

View File

@ -324,6 +324,7 @@ static int __init nios2_time_init(struct device_node *timer)
ret = nios2_clocksource_init(timer);
break;
default:
ret = 0;
break;
}

View File

@ -23,6 +23,8 @@
* they shouldn't be hard-coded!
*/
#define __ro_after_init __read_mostly
#define L1_CACHE_BYTES 16
#define L1_CACHE_SHIFT 4

View File

@ -368,7 +368,9 @@
#define __IGNORE_select /* newselect */
#define __IGNORE_fadvise64 /* fadvise64_64 */
#define __IGNORE_pkey_mprotect
#define __IGNORE_pkey_alloc
#define __IGNORE_pkey_free
#define LINUX_GATEWAY_ADDR 0x100

View File

@ -873,11 +873,11 @@ static void print_parisc_device(struct parisc_device *dev)
if (dev->num_addrs) {
int k;
printk(", additional addresses: ");
pr_cont(", additional addresses: ");
for (k = 0; k < dev->num_addrs; k++)
printk("0x%lx ", dev->addr[k]);
pr_cont("0x%lx ", dev->addr[k]);
}
printk("\n");
pr_cont("\n");
}
/**

View File

@ -100,14 +100,12 @@ set_thread_pointer:
.endr
/* This address must remain fixed at 0x100 for glibc's syscalls to work */
.align 256
.align LINUX_GATEWAY_ADDR
linux_gateway_entry:
gate .+8, %r0 /* become privileged */
mtsp %r0,%sr4 /* get kernel space into sr4 */
mtsp %r0,%sr5 /* get kernel space into sr5 */
mtsp %r0,%sr6 /* get kernel space into sr6 */
mfsp %sr7,%r1 /* save user sr7 */
mtsp %r1,%sr3 /* and store it in sr3 */
#ifdef CONFIG_64BIT
/* for now we can *always* set the W bit on entry to the syscall
@ -133,6 +131,14 @@ linux_gateway_entry:
depdi 0, 31, 32, %r21
1:
#endif
/* We use a rsm/ssm pair to prevent sr3 from being clobbered
* by external interrupts.
*/
mfsp %sr7,%r1 /* save user sr7 */
rsm PSW_SM_I, %r0 /* disable interrupts */
mtsp %r1,%sr3 /* and store it in sr3 */
mfctl %cr30,%r1
xor %r1,%r30,%r30 /* ye olde xor trick */
xor %r1,%r30,%r1
@ -147,6 +153,7 @@ linux_gateway_entry:
*/
mtsp %r0,%sr7 /* get kernel space into sr7 */
ssm PSW_SM_I, %r0 /* enable interrupts */
STREGM %r1,FRAME_SIZE(%r30) /* save r1 (usp) here for now */
mfctl %cr30,%r1 /* get task ptr in %r1 */
LDREG TI_TASK(%r1),%r1
@ -474,11 +481,6 @@ lws_start:
comiclr,>> __NR_lws_entries, %r20, %r0
b,n lws_exit_nosys
/* WARNING: Trashing sr2 and sr3 */
mfsp %sr7,%r1 /* get userspace into sr3 */
mtsp %r1,%sr3
mtsp %r0,%sr2 /* get kernel space into sr2 */
/* Load table start */
ldil L%lws_table, %r1
ldo R%lws_table(%r1), %r28 /* Scratch use of r28 */
@ -627,9 +629,9 @@ cas_action:
stw %r1, 4(%sr2,%r20)
#endif
/* The load and store could fail */
1: ldw,ma 0(%sr3,%r26), %r28
1: ldw,ma 0(%r26), %r28
sub,<> %r28, %r25, %r0
2: stw,ma %r24, 0(%sr3,%r26)
2: stw,ma %r24, 0(%r26)
/* Free lock */
stw,ma %r20, 0(%sr2,%r20)
#if ENABLE_LWS_DEBUG
@ -706,9 +708,9 @@ lws_compare_and_swap_2:
nop
/* 8bit load */
4: ldb 0(%sr3,%r25), %r25
4: ldb 0(%r25), %r25
b cas2_lock_start
5: ldb 0(%sr3,%r24), %r24
5: ldb 0(%r24), %r24
nop
nop
nop
@ -716,9 +718,9 @@ lws_compare_and_swap_2:
nop
/* 16bit load */
6: ldh 0(%sr3,%r25), %r25
6: ldh 0(%r25), %r25
b cas2_lock_start
7: ldh 0(%sr3,%r24), %r24
7: ldh 0(%r24), %r24
nop
nop
nop
@ -726,9 +728,9 @@ lws_compare_and_swap_2:
nop
/* 32bit load */
8: ldw 0(%sr3,%r25), %r25
8: ldw 0(%r25), %r25
b cas2_lock_start
9: ldw 0(%sr3,%r24), %r24
9: ldw 0(%r24), %r24
nop
nop
nop
@ -737,14 +739,14 @@ lws_compare_and_swap_2:
/* 64bit load */
#ifdef CONFIG_64BIT
10: ldd 0(%sr3,%r25), %r25
11: ldd 0(%sr3,%r24), %r24
10: ldd 0(%r25), %r25
11: ldd 0(%r24), %r24
#else
/* Load new value into r22/r23 - high/low */
10: ldw 0(%sr3,%r25), %r22
11: ldw 4(%sr3,%r25), %r23
10: ldw 0(%r25), %r22
11: ldw 4(%r25), %r23
/* Load new value into fr4 for atomic store later */
12: flddx 0(%sr3,%r24), %fr4
12: flddx 0(%r24), %fr4
#endif
cas2_lock_start:
@ -794,30 +796,30 @@ cas2_action:
ldo 1(%r0),%r28
/* 8bit CAS */
13: ldb,ma 0(%sr3,%r26), %r29
13: ldb,ma 0(%r26), %r29
sub,= %r29, %r25, %r0
b,n cas2_end
14: stb,ma %r24, 0(%sr3,%r26)
14: stb,ma %r24, 0(%r26)
b cas2_end
copy %r0, %r28
nop
nop
/* 16bit CAS */
15: ldh,ma 0(%sr3,%r26), %r29
15: ldh,ma 0(%r26), %r29
sub,= %r29, %r25, %r0
b,n cas2_end
16: sth,ma %r24, 0(%sr3,%r26)
16: sth,ma %r24, 0(%r26)
b cas2_end
copy %r0, %r28
nop
nop
/* 32bit CAS */
17: ldw,ma 0(%sr3,%r26), %r29
17: ldw,ma 0(%r26), %r29
sub,= %r29, %r25, %r0
b,n cas2_end
18: stw,ma %r24, 0(%sr3,%r26)
18: stw,ma %r24, 0(%r26)
b cas2_end
copy %r0, %r28
nop
@ -825,22 +827,22 @@ cas2_action:
/* 64bit CAS */
#ifdef CONFIG_64BIT
19: ldd,ma 0(%sr3,%r26), %r29
19: ldd,ma 0(%r26), %r29
sub,*= %r29, %r25, %r0
b,n cas2_end
20: std,ma %r24, 0(%sr3,%r26)
20: std,ma %r24, 0(%r26)
copy %r0, %r28
#else
/* Compare first word */
19: ldw,ma 0(%sr3,%r26), %r29
19: ldw,ma 0(%r26), %r29
sub,= %r29, %r22, %r0
b,n cas2_end
/* Compare second word */
20: ldw,ma 4(%sr3,%r26), %r29
20: ldw,ma 4(%r26), %r29
sub,= %r29, %r23, %r0
b,n cas2_end
/* Perform the store */
21: fstdx %fr4, 0(%sr3,%r26)
21: fstdx %fr4, 0(%r26)
copy %r0, %r28
#endif

View File

@ -91,7 +91,7 @@
*/
#define LOAD_HANDLER(reg, label) \
ld reg,PACAKBASE(r13); /* get high part of &label */ \
ori reg,reg,(FIXED_SYMBOL_ABS_ADDR(label))@l;
ori reg,reg,FIXED_SYMBOL_ABS_ADDR(label);
#define __LOAD_HANDLER(reg, label) \
ld reg,PACAKBASE(r13); \
@ -158,14 +158,17 @@ BEGIN_FTR_SECTION_NESTED(943) \
std ra,offset(r13); \
END_FTR_SECTION_NESTED(ftr,ftr,943)
#define EXCEPTION_PROLOG_0(area) \
GET_PACA(r13); \
#define EXCEPTION_PROLOG_0_PACA(area) \
std r9,area+EX_R9(r13); /* save r9 */ \
OPT_GET_SPR(r9, SPRN_PPR, CPU_FTR_HAS_PPR); \
HMT_MEDIUM; \
std r10,area+EX_R10(r13); /* save r10 - r12 */ \
OPT_GET_SPR(r10, SPRN_CFAR, CPU_FTR_CFAR)
#define EXCEPTION_PROLOG_0(area) \
GET_PACA(r13); \
EXCEPTION_PROLOG_0_PACA(area)
#define __EXCEPTION_PROLOG_1(area, extra, vec) \
OPT_SAVE_REG_TO_PACA(area+EX_PPR, r9, CPU_FTR_HAS_PPR); \
OPT_SAVE_REG_TO_PACA(area+EX_CFAR, r10, CPU_FTR_CFAR); \
@ -196,6 +199,12 @@ END_FTR_SECTION_NESTED(ftr,ftr,943)
EXCEPTION_PROLOG_1(area, extra, vec); \
EXCEPTION_PROLOG_PSERIES_1(label, h);
/* Have the PACA in r13 already */
#define EXCEPTION_PROLOG_PSERIES_PACA(area, label, h, extra, vec) \
EXCEPTION_PROLOG_0_PACA(area); \
EXCEPTION_PROLOG_1(area, extra, vec); \
EXCEPTION_PROLOG_PSERIES_1(label, h);
#define __KVMTEST(h, n) \
lbz r10,HSTATE_IN_GUEST(r13); \
cmpwi r10,0; \

View File

@ -460,5 +460,6 @@
#define PPC_SLBIA(IH) stringify_in_c(.long PPC_INST_SLBIA | \
((IH & 0x7) << 21))
#define PPC_INVALIDATE_ERAT PPC_SLBIA(7)
#endif /* _ASM_POWERPC_PPC_OPCODE_H */

View File

@ -116,7 +116,9 @@ EXC_VIRT_NONE(0x4000, 0x4100)
EXC_REAL_BEGIN(system_reset, 0x100, 0x200)
SET_SCRATCH0(r13)
EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common, EXC_STD,
GET_PACA(r13)
clrrdi r13,r13,1 /* Last bit of HSPRG0 is set if waking from winkle */
EXCEPTION_PROLOG_PSERIES_PACA(PACA_EXGEN, system_reset_common, EXC_STD,
IDLETEST, 0x100)
EXC_REAL_END(system_reset, 0x100, 0x200)
@ -124,6 +126,9 @@ EXC_VIRT_NONE(0x4100, 0x4200)
#ifdef CONFIG_PPC_P7_NAP
EXC_COMMON_BEGIN(system_reset_idle_common)
BEGIN_FTR_SECTION
GET_PACA(r13) /* Restore HSPRG0 to get the winkle bit in r13 */
END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_300)
bl pnv_restore_hyp_resource
li r0,PNV_THREAD_RUNNING
@ -169,7 +174,7 @@ EXC_REAL_BEGIN(machine_check, 0x200, 0x300)
SET_SCRATCH0(r13) /* save r13 */
/*
* Running native on arch 2.06 or later, we may wakeup from winkle
* inside machine check. If yes, then last bit of HSPGR0 would be set
* inside machine check. If yes, then last bit of HSPRG0 would be set
* to 1. Hence clear it unconditionally.
*/
GET_PACA(r13)
@ -388,7 +393,7 @@ EXC_COMMON_BEGIN(machine_check_handle_early)
/*
* Go back to winkle. Please note that this thread was woken up in
* machine check from winkle and have not restored the per-subcore
* state. Hence before going back to winkle, set last bit of HSPGR0
* state. Hence before going back to winkle, set last bit of HSPRG0
* to 1. This will make sure that if this thread gets woken up
* again at reset vector 0x100 then it will get chance to restore
* the subcore state.

View File

@ -1215,7 +1215,7 @@ static void show_instructions(struct pt_regs *regs)
int instr;
if (!(i % 8))
printk("\n");
pr_cont("\n");
#if !defined(CONFIG_BOOKE)
/* If executing with the IMMU off, adjust pc rather
@ -1227,18 +1227,18 @@ static void show_instructions(struct pt_regs *regs)
if (!__kernel_text_address(pc) ||
probe_kernel_address((unsigned int __user *)pc, instr)) {
printk(KERN_CONT "XXXXXXXX ");
pr_cont("XXXXXXXX ");
} else {
if (regs->nip == pc)
printk(KERN_CONT "<%08x> ", instr);
pr_cont("<%08x> ", instr);
else
printk(KERN_CONT "%08x ", instr);
pr_cont("%08x ", instr);
}
pc += sizeof(int);
}
printk("\n");
pr_cont("\n");
}
struct regbit {
@ -1282,7 +1282,7 @@ static void print_bits(unsigned long val, struct regbit *bits, const char *sep)
for (; bits->bit; ++bits)
if (val & bits->bit) {
printk("%s%s", s, bits->name);
pr_cont("%s%s", s, bits->name);
s = sep;
}
}
@ -1305,9 +1305,9 @@ static void print_tm_bits(unsigned long val)
* T: Transactional (bit 34)
*/
if (val & (MSR_TM | MSR_TS_S | MSR_TS_T)) {
printk(",TM[");
pr_cont(",TM[");
print_bits(val, msr_tm_bits, "");
printk("]");
pr_cont("]");
}
}
#else
@ -1316,10 +1316,10 @@ static void print_tm_bits(unsigned long val) {}
static void print_msr_bits(unsigned long val)
{
printk("<");
pr_cont("<");
print_bits(val, msr_bits, ",");
print_tm_bits(val);
printk(">");
pr_cont(">");
}
#ifdef CONFIG_PPC64
@ -1347,29 +1347,29 @@ void show_regs(struct pt_regs * regs)
printk(" CR: %08lx XER: %08lx\n", regs->ccr, regs->xer);
trap = TRAP(regs);
if ((regs->trap != 0xc00) && cpu_has_feature(CPU_FTR_CFAR))
printk("CFAR: "REG" ", regs->orig_gpr3);
pr_cont("CFAR: "REG" ", regs->orig_gpr3);
if (trap == 0x200 || trap == 0x300 || trap == 0x600)
#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE)
printk("DEAR: "REG" ESR: "REG" ", regs->dar, regs->dsisr);
pr_cont("DEAR: "REG" ESR: "REG" ", regs->dar, regs->dsisr);
#else
printk("DAR: "REG" DSISR: %08lx ", regs->dar, regs->dsisr);
pr_cont("DAR: "REG" DSISR: %08lx ", regs->dar, regs->dsisr);
#endif
#ifdef CONFIG_PPC64
printk("SOFTE: %ld ", regs->softe);
pr_cont("SOFTE: %ld ", regs->softe);
#endif
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
if (MSR_TM_ACTIVE(regs->msr))
printk("\nPACATMSCRATCH: %016llx ", get_paca()->tm_scratch);
pr_cont("\nPACATMSCRATCH: %016llx ", get_paca()->tm_scratch);
#endif
for (i = 0; i < 32; i++) {
if ((i % REGS_PER_LINE) == 0)
printk("\nGPR%02d: ", i);
printk(REG " ", regs->gpr[i]);
pr_cont("\nGPR%02d: ", i);
pr_cont(REG " ", regs->gpr[i]);
if (i == LAST_VOLATILE && !FULL_REGS(regs))
break;
}
printk("\n");
pr_cont("\n");
#ifdef CONFIG_KALLSYMS
/*
* Lookup NIP late so we have the best change of getting the
@ -1900,14 +1900,14 @@ void show_stack(struct task_struct *tsk, unsigned long *stack)
printk("["REG"] ["REG"] %pS", sp, ip, (void *)ip);
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
if ((ip == rth) && curr_frame >= 0) {
printk(" (%pS)",
pr_cont(" (%pS)",
(void *)current->ret_stack[curr_frame].ret);
curr_frame--;
}
#endif
if (firstframe)
printk(" (unreliable)");
printk("\n");
pr_cont(" (unreliable)");
pr_cont("\n");
}
firstframe = 0;

View File

@ -226,17 +226,25 @@ static void __init configure_exceptions(void)
if (firmware_has_feature(FW_FEATURE_OPAL))
opal_configure_cores();
/* Enable AIL if supported, and we are in hypervisor mode */
if (early_cpu_has_feature(CPU_FTR_HVMODE) &&
early_cpu_has_feature(CPU_FTR_ARCH_207S)) {
unsigned long lpcr = mfspr(SPRN_LPCR);
mtspr(SPRN_LPCR, lpcr | LPCR_AIL_3);
}
/* AIL on native is done in cpu_ready_for_interrupts() */
}
}
static void cpu_ready_for_interrupts(void)
{
/*
* Enable AIL if supported, and we are in hypervisor mode. This
* is called once for every processor.
*
* If we are not in hypervisor mode the job is done once for
* the whole partition in configure_exceptions().
*/
if (early_cpu_has_feature(CPU_FTR_HVMODE) &&
early_cpu_has_feature(CPU_FTR_ARCH_207S)) {
unsigned long lpcr = mfspr(SPRN_LPCR);
mtspr(SPRN_LPCR, lpcr | LPCR_AIL_3);
}
/* Set IR and DR in PACA MSR */
get_paca()->kernel_msr = MSR_KERNEL;
}

View File

@ -1029,6 +1029,10 @@ void hash__early_init_mmu_secondary(void)
{
/* Initialize hash table for that CPU */
if (!firmware_has_feature(FW_FEATURE_LPAR)) {
if (cpu_has_feature(CPU_FTR_POWER9_DD1))
update_hid_for_hash();
if (!cpu_has_feature(CPU_FTR_ARCH_300))
mtspr(SPRN_SDR1, _SDR1);
else

View File

@ -388,6 +388,10 @@ void radix__early_init_mmu_secondary(void)
* update partition table control register and UPRT
*/
if (!firmware_has_feature(FW_FEATURE_LPAR)) {
if (cpu_has_feature(CPU_FTR_POWER9_DD1))
update_hid_for_radix();
lpcr = mfspr(SPRN_LPCR);
mtspr(SPRN_LPCR, lpcr | LPCR_UPRT | LPCR_HR);

View File

@ -50,6 +50,8 @@ static inline void _tlbiel_pid(unsigned long pid, unsigned long ric)
for (set = 0; set < POWER9_TLB_SETS_RADIX ; set++) {
__tlbiel_pid(pid, set, ric);
}
if (cpu_has_feature(CPU_FTR_POWER9_DD1))
asm volatile(PPC_INVALIDATE_ERAT : : :"memory");
return;
}
@ -83,6 +85,8 @@ static inline void _tlbiel_va(unsigned long va, unsigned long pid,
asm volatile(PPC_TLBIEL(%0, %4, %3, %2, %1)
: : "r"(rb), "i"(r), "i"(prs), "i"(ric), "r"(rs) : "memory");
asm volatile("ptesync": : :"memory");
if (cpu_has_feature(CPU_FTR_POWER9_DD1))
asm volatile(PPC_INVALIDATE_ERAT : : :"memory");
}
static inline void _tlbie_va(unsigned long va, unsigned long pid,

View File

@ -363,11 +363,11 @@ out:
static int diag224_get_name_table(void)
{
/* memory must be below 2GB */
diag224_cpu_names = kmalloc(PAGE_SIZE, GFP_KERNEL | GFP_DMA);
diag224_cpu_names = (char *) __get_free_page(GFP_KERNEL | GFP_DMA);
if (!diag224_cpu_names)
return -ENOMEM;
if (diag224(diag224_cpu_names)) {
kfree(diag224_cpu_names);
free_page((unsigned long) diag224_cpu_names);
return -EOPNOTSUPP;
}
EBCASC(diag224_cpu_names + 16, (*diag224_cpu_names + 1) * 16);
@ -376,7 +376,7 @@ static int diag224_get_name_table(void)
static void diag224_delete_name_table(void)
{
kfree(diag224_cpu_names);
free_page((unsigned long) diag224_cpu_names);
}
static int diag224_idx2name(int index, char *name)

Some files were not shown because too many files have changed in this diff Show More