From c4e45c84270798b1d51ede9a8c6810378ccfe162 Mon Sep 17 00:00:00 2001 From: Shaul Triebitz Date: Mon, 30 Oct 2017 17:38:43 +0200 Subject: [PATCH 01/12] iwlwifi: mvm: set correct chains in Rx status ieee80211_rx_status::chains was always set to zero. That caused rate scaling to always start with the lowest rate possible (rs_get_initial_rate). Set it correctly according to the MPDU response. Signed-off-by: Shaul Triebitz Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c index 76dc58381e1c..20fe23fbf040 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c @@ -213,6 +213,7 @@ static void iwl_mvm_get_signal_strength(struct iwl_mvm *mvm, struct ieee80211_rx_status *rx_status) { int energy_a, energy_b, max_energy; + u32 rate_flags = le32_to_cpu(desc->rate_n_flags); energy_a = desc->energy_a; energy_a = energy_a ? -energy_a : S8_MIN; @@ -224,7 +225,8 @@ static void iwl_mvm_get_signal_strength(struct iwl_mvm *mvm, energy_a, energy_b, max_energy); rx_status->signal = max_energy; - rx_status->chains = 0; /* TODO: phy info */ + rx_status->chains = + (rate_flags & RATE_MCS_ANT_AB_MSK) >> RATE_MCS_ANT_POS; rx_status->chain_signal[0] = energy_a; rx_status->chain_signal[1] = energy_b; rx_status->chain_signal[2] = S8_MIN; From 0b9832b712d6767d6c7b01965fd788d1ca84fc92 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 13 Nov 2017 09:50:47 +0200 Subject: [PATCH 02/12] iwlwifi: mvm: don't use transmit queue hang detection when it is not possible When we act as an AP, new firmware versions handle internally the power saving clients and the driver doesn't know that the peers went to sleep. It is, hence, possible that a peer goes to sleep for a long time and stop pulling frames. This will cause its transmit queue to hang which is a condition that triggers the recovery flow in the driver. While this client is certainly buggy (it should have pulled the frame based on the TIM IE in the beacon), we can't blow up because of a buggy client. Change the current implementation to not enable the transmit queue hang detection on queues that serve peers when we act as an AP / GO. We can still enable this mechanism using the debug configuration which can come in handy when we want to debug why the client doesn't wake up. Cc: stable@vger.kernel.org # v4.13 Signed-off-by: Emmanuel Grumbach Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/utils.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/utils.c b/drivers/net/wireless/intel/iwlwifi/mvm/utils.c index d46115e2d69e..19c1d1f76e15 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/utils.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/utils.c @@ -1134,9 +1134,18 @@ unsigned int iwl_mvm_get_wd_timeout(struct iwl_mvm *mvm, unsigned int default_timeout = cmd_q ? IWL_DEF_WD_TIMEOUT : mvm->cfg->base_params->wd_timeout; - if (!iwl_fw_dbg_trigger_enabled(mvm->fw, FW_DBG_TRIGGER_TXQ_TIMERS)) + if (!iwl_fw_dbg_trigger_enabled(mvm->fw, FW_DBG_TRIGGER_TXQ_TIMERS)) { + /* + * We can't know when the station is asleep or awake, so we + * must disable the queue hang detection. + */ + if (fw_has_capa(&mvm->fw->ucode_capa, + IWL_UCODE_TLV_CAPA_STA_PM_NOTIF) && + vif && vif->type == NL80211_IFTYPE_AP) + return IWL_WATCHDOG_DISABLED; return iwlmvm_mod_params.tfd_q_hang_detect ? default_timeout : IWL_WATCHDOG_DISABLED; + } trigger = iwl_fw_dbg_get_trigger(mvm->fw, FW_DBG_TRIGGER_TXQ_TIMERS); txq_timer = (void *)trigger->data; From d1b275ffec459c5ae12b5c7086c84175696e5a9f Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Wed, 15 Nov 2017 14:12:30 +0200 Subject: [PATCH 03/12] iwlwifi: mvm: fix the TX queue hang timeout for MONITOR vif type The MONITOR type is missing in the interface type switch. Add it. Signed-off-by: Emmanuel Grumbach Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/utils.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/utils.c b/drivers/net/wireless/intel/iwlwifi/mvm/utils.c index 19c1d1f76e15..03ffd84786ca 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/utils.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/utils.c @@ -1172,6 +1172,8 @@ unsigned int iwl_mvm_get_wd_timeout(struct iwl_mvm *mvm, return le32_to_cpu(txq_timer->p2p_go); case NL80211_IFTYPE_P2P_DEVICE: return le32_to_cpu(txq_timer->p2p_device); + case NL80211_IFTYPE_MONITOR: + return default_timeout; default: WARN_ON(1); return mvm->cfg->base_params->wd_timeout; From b13f43a48571f0cd0fda271b5046b65f1f268db5 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Sun, 19 Nov 2017 10:35:14 +0200 Subject: [PATCH 04/12] iwlwifi: mvm: fix packet injection We need to have a station and a queue for the monitor interface to be able to inject traffic. We used to have this traffic routed to the auxiliary queue, but this queue isn't scheduled for the station we had linked to the monitor vif. Allocate a new queue, link it to the monitor vif's station and make that queue use the BE fifo. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=196715 Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach Signed-off-by: Luca Coelho --- .../net/wireless/intel/iwlwifi/fw/api/txq.h | 4 ++ .../net/wireless/intel/iwlwifi/mvm/mac-ctxt.c | 2 +- drivers/net/wireless/intel/iwlwifi/mvm/mvm.h | 1 + drivers/net/wireless/intel/iwlwifi/mvm/ops.c | 1 + drivers/net/wireless/intel/iwlwifi/mvm/sta.c | 53 ++++++++++++++----- drivers/net/wireless/intel/iwlwifi/mvm/tx.c | 3 +- 6 files changed, 49 insertions(+), 15 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/fw/api/txq.h b/drivers/net/wireless/intel/iwlwifi/fw/api/txq.h index 87b4434224a1..dfa111bb411e 100644 --- a/drivers/net/wireless/intel/iwlwifi/fw/api/txq.h +++ b/drivers/net/wireless/intel/iwlwifi/fw/api/txq.h @@ -68,6 +68,9 @@ * @IWL_MVM_DQA_CMD_QUEUE: a queue reserved for sending HCMDs to the FW * @IWL_MVM_DQA_AUX_QUEUE: a queue reserved for aux frames * @IWL_MVM_DQA_P2P_DEVICE_QUEUE: a queue reserved for P2P device frames + * @IWL_MVM_DQA_INJECT_MONITOR_QUEUE: a queue reserved for injection using + * monitor mode. Note this queue is the same as the queue for P2P device + * but we can't have active monitor mode along with P2P device anyway. * @IWL_MVM_DQA_GCAST_QUEUE: a queue reserved for P2P GO/SoftAP GCAST frames * @IWL_MVM_DQA_BSS_CLIENT_QUEUE: a queue reserved for BSS activity, to ensure * that we are never left without the possibility to connect to an AP. @@ -87,6 +90,7 @@ enum iwl_mvm_dqa_txq { IWL_MVM_DQA_CMD_QUEUE = 0, IWL_MVM_DQA_AUX_QUEUE = 1, IWL_MVM_DQA_P2P_DEVICE_QUEUE = 2, + IWL_MVM_DQA_INJECT_MONITOR_QUEUE = 2, IWL_MVM_DQA_GCAST_QUEUE = 3, IWL_MVM_DQA_BSS_CLIENT_QUEUE = 4, IWL_MVM_DQA_MIN_MGMT_QUEUE = 5, diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c index a2bf530eeae4..2f22e14e00fe 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac-ctxt.c @@ -787,7 +787,7 @@ static int iwl_mvm_mac_ctxt_cmd_listener(struct iwl_mvm *mvm, u32 action) { struct iwl_mac_ctx_cmd cmd = {}; - u32 tfd_queue_msk = 0; + u32 tfd_queue_msk = BIT(mvm->snif_queue); int ret; WARN_ON(vif->type != NL80211_IFTYPE_MONITOR); diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h index 4575595ab022..6a9a25beab3f 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h @@ -972,6 +972,7 @@ struct iwl_mvm { /* Tx queues */ u16 aux_queue; + u16 snif_queue; u16 probe_queue; u16 p2p_dev_queue; diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/ops.c b/drivers/net/wireless/intel/iwlwifi/mvm/ops.c index 7078b7e458be..45470b6b351a 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/ops.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/ops.c @@ -624,6 +624,7 @@ iwl_op_mode_mvm_start(struct iwl_trans *trans, const struct iwl_cfg *cfg, mvm->fw_restart = iwlwifi_mod_params.fw_restart ? -1 : 0; mvm->aux_queue = IWL_MVM_DQA_AUX_QUEUE; + mvm->snif_queue = IWL_MVM_DQA_INJECT_MONITOR_QUEUE; mvm->probe_queue = IWL_MVM_DQA_AP_PROBE_RESP_QUEUE; mvm->p2p_dev_queue = IWL_MVM_DQA_P2P_DEVICE_QUEUE; diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c index c19f98489d4e..1add5615fc3a 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/sta.c @@ -1709,29 +1709,29 @@ void iwl_mvm_dealloc_int_sta(struct iwl_mvm *mvm, struct iwl_mvm_int_sta *sta) sta->sta_id = IWL_MVM_INVALID_STA; } -static void iwl_mvm_enable_aux_queue(struct iwl_mvm *mvm) +static void iwl_mvm_enable_aux_snif_queue(struct iwl_mvm *mvm, u16 *queue, + u8 sta_id, u8 fifo) { unsigned int wdg_timeout = iwlmvm_mod_params.tfd_q_hang_detect ? mvm->cfg->base_params->wd_timeout : IWL_WATCHDOG_DISABLED; if (iwl_mvm_has_new_tx_api(mvm)) { - int queue = iwl_mvm_tvqm_enable_txq(mvm, mvm->aux_queue, - mvm->aux_sta.sta_id, - IWL_MAX_TID_COUNT, - wdg_timeout); - mvm->aux_queue = queue; + int tvqm_queue = + iwl_mvm_tvqm_enable_txq(mvm, *queue, sta_id, + IWL_MAX_TID_COUNT, + wdg_timeout); + *queue = tvqm_queue; } else { struct iwl_trans_txq_scd_cfg cfg = { - .fifo = IWL_MVM_TX_FIFO_MCAST, - .sta_id = mvm->aux_sta.sta_id, + .fifo = fifo, + .sta_id = sta_id, .tid = IWL_MAX_TID_COUNT, .aggregate = false, .frame_limit = IWL_FRAME_LIMIT, }; - iwl_mvm_enable_txq(mvm, mvm->aux_queue, mvm->aux_queue, 0, &cfg, - wdg_timeout); + iwl_mvm_enable_txq(mvm, *queue, *queue, 0, &cfg, wdg_timeout); } } @@ -1750,7 +1750,9 @@ int iwl_mvm_add_aux_sta(struct iwl_mvm *mvm) /* Map Aux queue to fifo - needs to happen before adding Aux station */ if (!iwl_mvm_has_new_tx_api(mvm)) - iwl_mvm_enable_aux_queue(mvm); + iwl_mvm_enable_aux_snif_queue(mvm, &mvm->aux_queue, + mvm->aux_sta.sta_id, + IWL_MVM_TX_FIFO_MCAST); ret = iwl_mvm_add_int_sta_common(mvm, &mvm->aux_sta, NULL, MAC_INDEX_AUX, 0); @@ -1764,7 +1766,9 @@ int iwl_mvm_add_aux_sta(struct iwl_mvm *mvm) * to firmware so enable queue here - after the station was added */ if (iwl_mvm_has_new_tx_api(mvm)) - iwl_mvm_enable_aux_queue(mvm); + iwl_mvm_enable_aux_snif_queue(mvm, &mvm->aux_queue, + mvm->aux_sta.sta_id, + IWL_MVM_TX_FIFO_MCAST); return 0; } @@ -1772,10 +1776,31 @@ int iwl_mvm_add_aux_sta(struct iwl_mvm *mvm) int iwl_mvm_add_snif_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif) { struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); + int ret; lockdep_assert_held(&mvm->mutex); - return iwl_mvm_add_int_sta_common(mvm, &mvm->snif_sta, vif->addr, + + /* Map snif queue to fifo - must happen before adding snif station */ + if (!iwl_mvm_has_new_tx_api(mvm)) + iwl_mvm_enable_aux_snif_queue(mvm, &mvm->snif_queue, + mvm->snif_sta.sta_id, + IWL_MVM_TX_FIFO_BE); + + ret = iwl_mvm_add_int_sta_common(mvm, &mvm->snif_sta, vif->addr, mvmvif->id, 0); + if (ret) + return ret; + + /* + * For 22000 firmware and on we cannot add queue to a station unknown + * to firmware so enable queue here - after the station was added + */ + if (iwl_mvm_has_new_tx_api(mvm)) + iwl_mvm_enable_aux_snif_queue(mvm, &mvm->snif_queue, + mvm->snif_sta.sta_id, + IWL_MVM_TX_FIFO_BE); + + return 0; } int iwl_mvm_rm_snif_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif) @@ -1784,6 +1809,8 @@ int iwl_mvm_rm_snif_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif) lockdep_assert_held(&mvm->mutex); + iwl_mvm_disable_txq(mvm, mvm->snif_queue, mvm->snif_queue, + IWL_MAX_TID_COUNT, 0); ret = iwl_mvm_rm_sta_common(mvm, mvm->snif_sta.sta_id); if (ret) IWL_WARN(mvm, "Failed sending remove station\n"); diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c index 593b7f97b29c..333bcb75b8af 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/tx.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/tx.c @@ -657,7 +657,8 @@ int iwl_mvm_tx_skb_non_sta(struct iwl_mvm *mvm, struct sk_buff *skb) if (ap_sta_id != IWL_MVM_INVALID_STA) sta_id = ap_sta_id; } else if (info.control.vif->type == NL80211_IFTYPE_MONITOR) { - queue = mvm->aux_queue; + queue = mvm->snif_queue; + sta_id = mvm->snif_sta.sta_id; } } From f3402d6d8eb084f6c2563dee1a09385b7c0ea2d5 Mon Sep 17 00:00:00 2001 From: Sara Sharon Date: Mon, 20 Nov 2017 11:37:18 +0200 Subject: [PATCH 05/12] iwlwifi: pcie: fix erroneous "Read failed message" Current pci dumping code code is always falling to the error path, resulting with a constant "Read failed" message, also for the successful reads. Fixes: a5c932e41fdd ("iwlwifi: pcie: dump registers when HW becomes inaccessible") Signed-off-by: Sara Sharon Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/pcie/trans.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c index b7a51603465b..3dee95e6a475 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c @@ -166,6 +166,7 @@ static void iwl_trans_pcie_dump_regs(struct iwl_trans *trans) print_hex_dump(KERN_ERR, prefix, DUMP_PREFIX_OFFSET, 32, 4, buf, i, 0); } + goto out; err_read: print_hex_dump(KERN_ERR, prefix, DUMP_PREFIX_OFFSET, 32, 4, buf, i, 0); From 0232d2cd7aa8e1b810fe84fb4059a0bd1eabe2ba Mon Sep 17 00:00:00 2001 From: Sara Sharon Date: Mon, 20 Nov 2017 13:25:05 +0200 Subject: [PATCH 06/12] iwlwifi: fix access to prph when transport is stopped When getting HW rfkill we get stop_device being called from two paths. One path is the IRQ calling stop device, and updating op mode and stack. As a result, cfg80211 is running rfkill sync work that shuts down all devices (second path). In the second path, we eventually get to iwl_mvm_stop_device which calls iwl_fw_dump_conf_clear->iwl_fw_dbg_stop_recording, that access periphery registers. The device may be stopped at this point from the first path, which will result with a failure to access those registers. Simply checking for the trans status is insufficient, since the race will still exist, only minimized. Instead, move the stop from iwl_fw_dump_conf_clear (which is getting called only from stop path) to the transport stop device function, where the access is always safe. This has the added value, of actually stopping dbgc before stopping device even when the stop is initiated from the transport. Fixes: 1efc3843a4ee ("iwlwifi: stop dbgc recording before stopping DMA") Signed-off-by: Sara Sharon Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/fw/dbg.h | 2 -- drivers/net/wireless/intel/iwlwifi/pcie/trans-gen2.c | 6 ++++++ drivers/net/wireless/intel/iwlwifi/pcie/trans.c | 9 +++++++++ 3 files changed, 15 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/fw/dbg.h b/drivers/net/wireless/intel/iwlwifi/fw/dbg.h index 9c889a32fe24..223fb77a3aa9 100644 --- a/drivers/net/wireless/intel/iwlwifi/fw/dbg.h +++ b/drivers/net/wireless/intel/iwlwifi/fw/dbg.h @@ -209,8 +209,6 @@ static inline void iwl_fw_dbg_stop_recording(struct iwl_fw_runtime *fwrt) static inline void iwl_fw_dump_conf_clear(struct iwl_fw_runtime *fwrt) { - iwl_fw_dbg_stop_recording(fwrt); - fwrt->dump.conf = FW_DBG_INVALID; } diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans-gen2.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans-gen2.c index c59f4581e972..ac05fd1e74c4 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/trans-gen2.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans-gen2.c @@ -49,6 +49,7 @@ * *****************************************************************************/ #include "iwl-trans.h" +#include "iwl-prph.h" #include "iwl-context-info.h" #include "internal.h" @@ -156,6 +157,11 @@ void _iwl_trans_pcie_gen2_stop_device(struct iwl_trans *trans, bool low_power) trans_pcie->is_down = true; + /* Stop dbgc before stopping device */ + iwl_write_prph(trans, DBGC_IN_SAMPLE, 0); + udelay(100); + iwl_write_prph(trans, DBGC_OUT_CTRL, 0); + /* tell the device to stop sending interrupts */ iwl_disable_interrupts(trans); diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c index 3dee95e6a475..4541c86881d6 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c @@ -1227,6 +1227,15 @@ static void _iwl_trans_pcie_stop_device(struct iwl_trans *trans, bool low_power) trans_pcie->is_down = true; + /* Stop dbgc before stopping device */ + if (trans->cfg->device_family == IWL_DEVICE_FAMILY_7000) { + iwl_set_bits_prph(trans, MON_BUFF_SAMPLE_CTL, 0x100); + } else { + iwl_write_prph(trans, DBGC_IN_SAMPLE, 0); + udelay(100); + iwl_write_prph(trans, DBGC_OUT_CTRL, 0); + } + /* tell the device to stop sending interrupts */ iwl_disable_interrupts(trans); From 5c3de777bdaf48bd0cfb43097c0d0fb85056cab7 Mon Sep 17 00:00:00 2001 From: Arend Van Spriel Date: Sat, 25 Nov 2017 21:39:25 +0100 Subject: [PATCH 07/12] brcmfmac: change driver unbind order of the sdio function devices In the function brcmf_sdio_firmware_callback() the driver is unbound from the sdio function devices in the error path. However, the order in which it is done resulted in a use-after-free issue (see brcmf_ops_sdio_remove() in bcmsdh.c). Hence change the order and first unbind sdio function #2 device and then unbind sdio function #1 device. Cc: stable@vger.kernel.org # v4.12.x Fixes: 7a51461fc2da ("brcmfmac: unbind all devices upon failure in firmware callback") Reported-by: Stefan Wahren Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Franky Lin Signed-off-by: Arend van Spriel Signed-off-by: Kalle Valo --- drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c index 310c4e2746aa..adf180f338ca 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c @@ -4121,8 +4121,8 @@ release: sdio_release_host(sdiodev->func[1]); fail: brcmf_dbg(TRACE, "failed: dev=%s, err=%d\n", dev_name(dev), err); - device_release_driver(dev); device_release_driver(&sdiodev->func[2]->dev); + device_release_driver(dev); } struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev) From 567deca8e72df3ceb6c07c63f8541a4928f64d3b Mon Sep 17 00:00:00 2001 From: Ihab Zhaika Date: Thu, 16 Nov 2017 09:29:19 +0200 Subject: [PATCH 08/12] iwlwifi: add new cards for 9260 and 22000 series add 1 PCI ID for 9260 series and 1 for 22000 series. Cc: stable@vger.kernel.org Signed-off-by: Ihab Zhaika Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/pcie/drv.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c index f21fe59faccf..ccd7c33c4c28 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c @@ -553,6 +553,7 @@ static const struct pci_device_id iwl_hw_card_ids[] = { {IWL_PCI_DEVICE(0x271B, 0x0014, iwl9160_2ac_cfg)}, {IWL_PCI_DEVICE(0x271B, 0x0210, iwl9160_2ac_cfg)}, {IWL_PCI_DEVICE(0x271B, 0x0214, iwl9260_2ac_cfg)}, + {IWL_PCI_DEVICE(0x271C, 0x0214, iwl9260_2ac_cfg)}, {IWL_PCI_DEVICE(0x2720, 0x0034, iwl9560_2ac_cfg)}, {IWL_PCI_DEVICE(0x2720, 0x0038, iwl9560_2ac_cfg)}, {IWL_PCI_DEVICE(0x2720, 0x003C, iwl9560_2ac_cfg)}, @@ -664,6 +665,7 @@ static const struct pci_device_id iwl_hw_card_ids[] = { {IWL_PCI_DEVICE(0x2720, 0x0310, iwla000_2ac_cfg_hr_cdb)}, {IWL_PCI_DEVICE(0x40C0, 0x0000, iwla000_2ax_cfg_hr)}, {IWL_PCI_DEVICE(0x40C0, 0x0A10, iwla000_2ax_cfg_hr)}, + {IWL_PCI_DEVICE(0xA0F0, 0x0000, iwla000_2ax_cfg_hr)}, #endif /* CONFIG_IWLMVM */ From 6c2d49fdc5d947c5fe89935bd52e69f10000f4cb Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 13 Nov 2017 17:26:09 +0100 Subject: [PATCH 09/12] iwlwifi: mvm: flush queue before deleting ROC Before deleting a time event (remain-on-channel instance), flush the queue so that frames cannot get stuck on it. We already flush the AUX STA queues, but a separate station is used for the P2P Device queue. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/mvm.h | 2 ++ .../wireless/intel/iwlwifi/mvm/time-event.c | 24 +++++++++++++++++-- 2 files changed, 24 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h index 6a9a25beab3f..55ab5349dd40 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mvm.h @@ -1061,6 +1061,7 @@ struct iwl_mvm { * @IWL_MVM_STATUS_ROC_AUX_RUNNING: AUX remain-on-channel is running * @IWL_MVM_STATUS_D3_RECONFIG: D3 reconfiguration is being done * @IWL_MVM_STATUS_FIRMWARE_RUNNING: firmware is running + * @IWL_MVM_STATUS_NEED_FLUSH_P2P: need to flush P2P bcast STA */ enum iwl_mvm_status { IWL_MVM_STATUS_HW_RFKILL, @@ -1072,6 +1073,7 @@ enum iwl_mvm_status { IWL_MVM_STATUS_ROC_AUX_RUNNING, IWL_MVM_STATUS_D3_RECONFIG, IWL_MVM_STATUS_FIRMWARE_RUNNING, + IWL_MVM_STATUS_NEED_FLUSH_P2P, }; /* Keep track of completed init configuration */ diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/time-event.c b/drivers/net/wireless/intel/iwlwifi/mvm/time-event.c index 4d0314912e94..e25cda9fbf6c 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/time-event.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/time-event.c @@ -132,6 +132,24 @@ void iwl_mvm_roc_done_wk(struct work_struct *wk) * executed, and a new time event means a new command. */ iwl_mvm_flush_sta(mvm, &mvm->aux_sta, true, CMD_ASYNC); + + /* Do the same for the P2P device queue (STA) */ + if (test_and_clear_bit(IWL_MVM_STATUS_NEED_FLUSH_P2P, &mvm->status)) { + struct iwl_mvm_vif *mvmvif; + + /* + * NB: access to this pointer would be racy, but the flush bit + * can only be set when we had a P2P-Device VIF, and we have a + * flush of this work in iwl_mvm_prepare_mac_removal() so it's + * not really racy. + */ + + if (!WARN_ON(!mvm->p2p_device_vif)) { + mvmvif = iwl_mvm_vif_from_mac80211(mvm->p2p_device_vif); + iwl_mvm_flush_sta(mvm, &mvmvif->bcast_sta, true, + CMD_ASYNC); + } + } } static void iwl_mvm_roc_finished(struct iwl_mvm *mvm) @@ -855,10 +873,12 @@ void iwl_mvm_stop_roc(struct iwl_mvm *mvm) mvmvif = iwl_mvm_vif_from_mac80211(te_data->vif); - if (te_data->vif->type == NL80211_IFTYPE_P2P_DEVICE) + if (te_data->vif->type == NL80211_IFTYPE_P2P_DEVICE) { iwl_mvm_remove_time_event(mvm, mvmvif, te_data); - else + set_bit(IWL_MVM_STATUS_NEED_FLUSH_P2P, &mvm->status); + } else { iwl_mvm_remove_aux_roc_te(mvm, mvmvif, te_data); + } iwl_mvm_roc_finished(mvm); } From 9d0fc5a50a0548f8e5d61243e5e5f26d5c405aef Mon Sep 17 00:00:00 2001 From: David Spinadel Date: Mon, 21 Nov 2016 17:01:25 +0200 Subject: [PATCH 10/12] iwlwifi: mvm: enable RX offloading with TKIP and WEP Set the flag that indicates that ICV was stripped on if this option was enabled in the HW. Cc: stable@vger.kernel.org # 4.13+ [this is needed for the 9000-series HW to work properly] Signed-off-by: David Spinadel Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/iwl-trans.h | 4 +++- drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c | 12 +++++++++--- 2 files changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-trans.h b/drivers/net/wireless/intel/iwlwifi/iwl-trans.h index ca0b5536a8a6..921cab9e2d73 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-trans.h +++ b/drivers/net/wireless/intel/iwlwifi/iwl-trans.h @@ -117,6 +117,7 @@ #define FH_RSCSR_FRAME_INVALID 0x55550000 #define FH_RSCSR_FRAME_ALIGN 0x40 #define FH_RSCSR_RPA_EN BIT(25) +#define FH_RSCSR_RADA_EN BIT(26) #define FH_RSCSR_RXQ_POS 16 #define FH_RSCSR_RXQ_MASK 0x3F0000 @@ -128,7 +129,8 @@ struct iwl_rx_packet { * 31: flag flush RB request * 30: flag ignore TC (terminal counter) request * 29: flag fast IRQ request - * 28-26: Reserved + * 28-27: Reserved + * 26: RADA enabled * 25: Offload enabled * 24: RPF enabled * 23: RSS enabled diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c index 20fe23fbf040..bf8409d8a132 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c @@ -234,8 +234,8 @@ static void iwl_mvm_get_signal_strength(struct iwl_mvm *mvm, static int iwl_mvm_rx_crypto(struct iwl_mvm *mvm, struct ieee80211_hdr *hdr, struct ieee80211_rx_status *stats, - struct iwl_rx_mpdu_desc *desc, int queue, - u8 *crypt_len) + struct iwl_rx_mpdu_desc *desc, u32 pkt_flags, + int queue, u8 *crypt_len) { u16 status = le16_to_cpu(desc->status); @@ -272,6 +272,10 @@ static int iwl_mvm_rx_crypto(struct iwl_mvm *mvm, struct ieee80211_hdr *hdr, if ((status & IWL_RX_MPDU_STATUS_SEC_MASK) == IWL_RX_MPDU_STATUS_SEC_WEP) *crypt_len = IEEE80211_WEP_IV_LEN; + + if (pkt_flags & FH_RSCSR_RADA_EN) + stats->flag |= RX_FLAG_ICV_STRIPPED; + return 0; case IWL_RX_MPDU_STATUS_SEC_EXT_ENC: if (!(status & IWL_RX_MPDU_STATUS_MIC_OK)) @@ -850,7 +854,9 @@ void iwl_mvm_rx_mpdu_mq(struct iwl_mvm *mvm, struct napi_struct *napi, rx_status = IEEE80211_SKB_RXCB(skb); - if (iwl_mvm_rx_crypto(mvm, hdr, rx_status, desc, queue, &crypt_len)) { + if (iwl_mvm_rx_crypto(mvm, hdr, rx_status, desc, + le32_to_cpu(pkt->len_n_flags), queue, + &crypt_len)) { kfree_skb(skb); return; } From bf19037074e770aad74b3b90f37b8b98db3f3748 Mon Sep 17 00:00:00 2001 From: Sara Sharon Date: Mon, 8 Feb 2016 23:30:47 +0200 Subject: [PATCH 11/12] iwlwifi: mvm: mark MIC stripped MPDUs When RADA is active, the hardware decrypts the packets and strips off the MIC as it is useless after decryption. Indicate that to mac80211. Cc: stable@vger.kernel.org # 4.13+ [this is needed for the 9000-series HW to work properly] Signed-off-by: Sara Sharon Signed-off-by: Luca Coelho --- drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c index bf8409d8a132..3b8d44361380 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/rxmq.c @@ -255,6 +255,8 @@ static int iwl_mvm_rx_crypto(struct iwl_mvm *mvm, struct ieee80211_hdr *hdr, return -1; stats->flag |= RX_FLAG_DECRYPTED; + if (pkt_flags & FH_RSCSR_RADA_EN) + stats->flag |= RX_FLAG_MIC_STRIPPED; *crypt_len = IEEE80211_CCMP_HDR_LEN; return 0; case IWL_RX_MPDU_STATUS_SEC_TKIP: From 51ef7925e10688c57186d438e784532e063492e4 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Thu, 23 Nov 2017 17:57:04 +0200 Subject: [PATCH 12/12] brcmfmac: Avoid build error with make W=1 When I run make W=1 on gcc (Debian 7.2.0-16) 7.2.0 I got an error for the first run, all next ones are okay. CC [M] drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.o drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:2078: error: Cannot parse struct or union! scripts/Makefile.build:310: recipe for target 'drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.o' failed Seems like something happened with W=1 and wrong kernel doc format. As a quick fix remove dubious /** in the code. Signed-off-by: Andy Shevchenko Acked-by: Arend van Spriel Signed-off-by: Kalle Valo --- drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c index adf180f338ca..cdf9e4161592 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c @@ -2070,7 +2070,7 @@ static int brcmf_sdio_txpkt_hdalign(struct brcmf_sdio *bus, struct sk_buff *pkt) return head_pad; } -/** +/* * struct brcmf_skbuff_cb reserves first two bytes in sk_buff::cb for * bus layer usage. */