Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6

Pull crypto fixes from Herbert Xu:
 "This fixes the following issues:

   - memory corruption when kmalloc fails in xts/lrw

   - mark some CCP DMA channels as private

   - fix reordering race in padata

   - regression in omap-rng DT description"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: xts,lrw - fix out-of-bounds write after kmalloc failure
  crypto: ccp - Make some CCP DMA channels private
  padata: avoid race in reordering
  dt-bindings: rng: clocks property on omap_rng not always mandatory

Documentation/devicetree/bindings/rng/omap_rng.txt

@@ -12,7 +12,8 @@ Required properties:
 - reg : Offset and length of the register set for the module
 - interrupts : the interrupt number for the RNG module.
 		Used for "ti,omap4-rng" and "inside-secure,safexcel-eip76"
-- clocks: the trng clock source
+- clocks: the trng clock source. Only mandatory for the
+  "inside-secure,safexcel-eip76" compatible.
 
 Example:
 /* AM335x */

crypto/lrw.c

@@ -286,8 +286,11 @@ static int init_crypt(struct skcipher_request *req, crypto_completion_t done)
 
 	subreq->cryptlen = LRW_BUFFER_SIZE;
 	if (req->cryptlen > LRW_BUFFER_SIZE) {
-		subreq->cryptlen = min(req->cryptlen, (unsigned)PAGE_SIZE);
-		rctx->ext = kmalloc(subreq->cryptlen, gfp);
+		unsigned int n = min(req->cryptlen, (unsigned int)PAGE_SIZE);
+
+		rctx->ext = kmalloc(n, gfp);
+		if (rctx->ext)
+			subreq->cryptlen = n;
 	}
 
 	rctx->src = req->src;

crypto/xts.c

@@ -230,8 +230,11 @@ static int init_crypt(struct skcipher_request *req, crypto_completion_t done)
 
 	subreq->cryptlen = XTS_BUFFER_SIZE;
 	if (req->cryptlen > XTS_BUFFER_SIZE) {
-		subreq->cryptlen = min(req->cryptlen, (unsigned)PAGE_SIZE);
-		rctx->ext = kmalloc(subreq->cryptlen, gfp);
+		unsigned int n = min(req->cryptlen, (unsigned int)PAGE_SIZE);
+
+		rctx->ext = kmalloc(n, gfp);
+		if (rctx->ext)
+			subreq->cryptlen = n;
 	}
 
 	rctx->src = req->src;

drivers/crypto/ccp/ccp-dev-v5.c

@@ -1015,6 +1015,7 @@ const struct ccp_vdata ccpv5a = {
 
 const struct ccp_vdata ccpv5b = {
 	.version = CCP_VERSION(5, 0),
+	.dma_chan_attr = DMA_PRIVATE,
 	.setup = ccp5other_config,
 	.perform = &ccp5_actions,
 	.bar = 2,

drivers/crypto/ccp/ccp-dev.h

@@ -179,6 +179,10 @@
 
 /* ------------------------ General CCP Defines ------------------------ */
 
+#define	CCP_DMA_DFLT			0x0
+#define	CCP_DMA_PRIV			0x1
+#define	CCP_DMA_PUB			0x2
+
 #define CCP_DMAPOOL_MAX_SIZE		64
 #define CCP_DMAPOOL_ALIGN		BIT(5)
 
@@ -636,6 +640,7 @@ struct ccp_actions {
 /* Structure to hold CCP version-specific values */
 struct ccp_vdata {
 	const unsigned int version;
+	const unsigned int dma_chan_attr;
 	void (*setup)(struct ccp_device *);
 	const struct ccp_actions *perform;
 	const unsigned int bar;

drivers/crypto/ccp/ccp-dmaengine.c

@@ -10,6 +10,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/dmaengine.h>
 #include <linux/spinlock.h>
@@ -25,6 +26,37 @@
 	(mask == 0) ? 64 : fls64(mask);	\
 })
 
+/* The CCP as a DMA provider can be configured for public or private
+ * channels. Default is specified in the vdata for the device (PCI ID).
+ * This module parameter will override for all channels on all devices:
+ *   dma_chan_attr = 0x2 to force all channels public
+ *                 = 0x1 to force all channels private
+ *                 = 0x0 to defer to the vdata setting
+ *                 = any other value: warning, revert to 0x0
+ */
+static unsigned int dma_chan_attr = CCP_DMA_DFLT;
+module_param(dma_chan_attr, uint, 0444);
+MODULE_PARM_DESC(dma_chan_attr, "Set DMA channel visibility: 0 (default) = device defaults, 1 = make private, 2 = make public");
+
+unsigned int ccp_get_dma_chan_attr(struct ccp_device *ccp)
+{
+	switch (dma_chan_attr) {
+	case CCP_DMA_DFLT:
+		return ccp->vdata->dma_chan_attr;
+
+	case CCP_DMA_PRIV:
+		return DMA_PRIVATE;
+
+	case CCP_DMA_PUB:
+		return 0;
+
+	default:
+		dev_info_once(ccp->dev, "Invalid value for dma_chan_attr: %d\n",
+			      dma_chan_attr);
+		return ccp->vdata->dma_chan_attr;
+	}
+}
+
 static void ccp_free_cmd_resources(struct ccp_device *ccp,
 				   struct list_head *list)
 {
@@ -675,6 +707,15 @@ int ccp_dmaengine_register(struct ccp_device *ccp)
 	dma_cap_set(DMA_SG, dma_dev->cap_mask);
 	dma_cap_set(DMA_INTERRUPT, dma_dev->cap_mask);
 
+	/* The DMA channels for this device can be set to public or private,
+	 * and overridden by the module parameter dma_chan_attr.
+	 * Default: according to the value in vdata (dma_chan_attr=0)
+	 * dma_chan_attr=0x1: all channels private (override vdata)
+	 * dma_chan_attr=0x2: all channels public (override vdata)
+	 */
+	if (ccp_get_dma_chan_attr(ccp) == DMA_PRIVATE)
+		dma_cap_set(DMA_PRIVATE, dma_dev->cap_mask);
+
 	INIT_LIST_HEAD(&dma_dev->channels);
 	for (i = 0; i < ccp->cmd_q_count; i++) {
 		chan = ccp->ccp_dma_chan + i;

kernel/padata.c

@@ -186,19 +186,20 @@ static struct padata_priv *padata_get_next(struct parallel_data *pd)
 
 	reorder = &next_queue->reorder;
 
+	spin_lock(&reorder->lock);
 	if (!list_empty(&reorder->list)) {
 		padata = list_entry(reorder->list.next,
 				    struct padata_priv, list);
 
-		spin_lock(&reorder->lock);
 		list_del_init(&padata->list);
 		atomic_dec(&pd->reorder_objects);
-		spin_unlock(&reorder->lock);
 
 		pd->processed++;
 
+		spin_unlock(&reorder->lock);
 		goto out;
 	}
+	spin_unlock(&reorder->lock);
 
 	if (__this_cpu_read(pd->pqueue->cpu_index) == next_queue->cpu_index) {
 		padata = ERR_PTR(-ENODATA);