License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
|
|
|
/* SPDX-License-Identifier: GPL-2.0 */
|
2012-11-28 02:33:25 +08:00
|
|
|
#ifndef _LINUX_CONTEXT_TRACKING_H
|
|
|
|
|
#define _LINUX_CONTEXT_TRACKING_H
|
|
|
|
|
|
|
|
|
|
#include <linux/sched.h>
|
2013-05-16 07:21:38 +08:00
|
|
|
#include <linux/vtime.h>
|
2013-07-12 08:15:49 +08:00
|
|
|
#include <linux/context_tracking_state.h>
|
2013-02-24 07:23:25 +08:00
|
|
|
#include <asm/ptrace.h>
|
2013-01-08 01:12:14 +08:00
|
|
|
|
2013-05-16 07:21:38 +08:00
|
|
|
|
2013-02-24 08:19:14 +08:00
|
|
|
#ifdef CONFIG_CONTEXT_TRACKING
|
2013-07-10 06:55:25 +08:00
|
|
|
extern void context_tracking_cpu_set(int cpu);
|
|
|
|
|
|
2015-10-28 09:39:56 +08:00
|
|
|
/* Called with interrupts disabled. */
|
|
|
|
|
extern void __context_tracking_enter(enum ctx_state state);
|
|
|
|
|
extern void __context_tracking_exit(enum ctx_state state);
|
|
|
|
|
|
2015-02-11 04:27:50 +08:00
|
|
|
extern void context_tracking_enter(enum ctx_state state);
|
|
|
|
|
extern void context_tracking_exit(enum ctx_state state);
|
2013-07-10 08:44:35 +08:00
|
|
|
extern void context_tracking_user_enter(void);
|
|
|
|
|
extern void context_tracking_user_exit(void);
|
|
|
|
|
|
|
|
|
|
static inline void user_enter(void)
|
|
|
|
|
{
|
2019-10-16 10:56:51 +08:00
|
|
|
if (context_tracking_enabled())
|
2015-10-28 09:39:55 +08:00
|
|
|
context_tracking_enter(CONTEXT_USER);
|
2013-07-10 08:44:35 +08:00
|
|
|
|
|
|
|
|
}
|
|
|
|
|
static inline void user_exit(void)
|
|
|
|
|
{
|
2019-10-16 10:56:51 +08:00
|
|
|
if (context_tracking_enabled())
|
2015-10-28 09:39:55 +08:00
|
|
|
context_tracking_exit(CONTEXT_USER);
|
2013-07-10 08:44:35 +08:00
|
|
|
}
|
2013-02-24 07:23:25 +08:00
|
|
|
|
x86/entry: Avoid interrupt flag save and restore
Thanks to all the work that was done by Andy Lutomirski and others,
enter_from_user_mode() and prepare_exit_to_usermode() are now called only with
interrupts disabled. Let's provide them a version of user_enter()/user_exit()
that skips saving and restoring the interrupt flag.
On an AMD-based machine I tested this patch on, with force-enabled
context tracking, the speed-up in system calls was 90 clock cycles or 6%,
measured with the following simple benchmark:
#include <sys/signal.h>
#include <time.h>
#include <unistd.h>
#include <stdio.h>
unsigned long rdtsc()
{
unsigned long result;
asm volatile("rdtsc; shl $32, %%rdx; mov %%eax, %%eax\n"
"or %%rdx, %%rax" : "=a" (result) : : "rdx");
return result;
}
int main()
{
unsigned long tsc1, tsc2;
int pid = getpid();
int i;
tsc1 = rdtsc();
for (i = 0; i < 100000000; i++)
kill(pid, SIGWINCH);
tsc2 = rdtsc();
printf("%ld\n", tsc2 - tsc1);
}
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kvm@vger.kernel.org
Link: http://lkml.kernel.org/r/1466434712-31440-2-git-send-email-pbonzini@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-20 22:58:29 +08:00
|
|
|
/* Called with interrupts disabled. */
|
|
|
|
|
static inline void user_enter_irqoff(void)
|
|
|
|
|
{
|
2019-10-16 10:56:51 +08:00
|
|
|
if (context_tracking_enabled())
|
x86/entry: Avoid interrupt flag save and restore
Thanks to all the work that was done by Andy Lutomirski and others,
enter_from_user_mode() and prepare_exit_to_usermode() are now called only with
interrupts disabled. Let's provide them a version of user_enter()/user_exit()
that skips saving and restoring the interrupt flag.
On an AMD-based machine I tested this patch on, with force-enabled
context tracking, the speed-up in system calls was 90 clock cycles or 6%,
measured with the following simple benchmark:
#include <sys/signal.h>
#include <time.h>
#include <unistd.h>
#include <stdio.h>
unsigned long rdtsc()
{
unsigned long result;
asm volatile("rdtsc; shl $32, %%rdx; mov %%eax, %%eax\n"
"or %%rdx, %%rax" : "=a" (result) : : "rdx");
return result;
}
int main()
{
unsigned long tsc1, tsc2;
int pid = getpid();
int i;
tsc1 = rdtsc();
for (i = 0; i < 100000000; i++)
kill(pid, SIGWINCH);
tsc2 = rdtsc();
printf("%ld\n", tsc2 - tsc1);
}
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kvm@vger.kernel.org
Link: http://lkml.kernel.org/r/1466434712-31440-2-git-send-email-pbonzini@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-20 22:58:29 +08:00
|
|
|
__context_tracking_enter(CONTEXT_USER);
|
|
|
|
|
|
|
|
|
|
}
|
|
|
|
|
static inline void user_exit_irqoff(void)
|
|
|
|
|
{
|
2019-10-16 10:56:51 +08:00
|
|
|
if (context_tracking_enabled())
|
x86/entry: Avoid interrupt flag save and restore
Thanks to all the work that was done by Andy Lutomirski and others,
enter_from_user_mode() and prepare_exit_to_usermode() are now called only with
interrupts disabled. Let's provide them a version of user_enter()/user_exit()
that skips saving and restoring the interrupt flag.
On an AMD-based machine I tested this patch on, with force-enabled
context tracking, the speed-up in system calls was 90 clock cycles or 6%,
measured with the following simple benchmark:
#include <sys/signal.h>
#include <time.h>
#include <unistd.h>
#include <stdio.h>
unsigned long rdtsc()
{
unsigned long result;
asm volatile("rdtsc; shl $32, %%rdx; mov %%eax, %%eax\n"
"or %%rdx, %%rax" : "=a" (result) : : "rdx");
return result;
}
int main()
{
unsigned long tsc1, tsc2;
int pid = getpid();
int i;
tsc1 = rdtsc();
for (i = 0; i < 100000000; i++)
kill(pid, SIGWINCH);
tsc2 = rdtsc();
printf("%ld\n", tsc2 - tsc1);
}
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kvm@vger.kernel.org
Link: http://lkml.kernel.org/r/1466434712-31440-2-git-send-email-pbonzini@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-20 22:58:29 +08:00
|
|
|
__context_tracking_exit(CONTEXT_USER);
|
|
|
|
|
}
|
|
|
|
|
|
2013-02-24 08:19:14 +08:00
|
|
|
static inline enum ctx_state exception_enter(void)
|
2013-02-24 07:23:25 +08:00
|
|
|
{
|
2013-02-24 08:19:14 +08:00
|
|
|
enum ctx_state prev_ctx;
|
|
|
|
|
|
2019-10-16 10:56:51 +08:00
|
|
|
if (!context_tracking_enabled())
|
2013-07-10 08:44:35 +08:00
|
|
|
return 0;
|
|
|
|
|
|
2013-02-24 08:19:14 +08:00
|
|
|
prev_ctx = this_cpu_read(context_tracking.state);
|
2015-02-11 04:27:50 +08:00
|
|
|
if (prev_ctx != CONTEXT_KERNEL)
|
|
|
|
|
context_tracking_exit(prev_ctx);
|
2013-02-24 08:19:14 +08:00
|
|
|
|
|
|
|
|
return prev_ctx;
|
2013-02-24 07:23:25 +08:00
|
|
|
}
|
|
|
|
|
|
2013-02-24 08:19:14 +08:00
|
|
|
static inline void exception_exit(enum ctx_state prev_ctx)
|
2013-02-24 07:23:25 +08:00
|
|
|
{
|
2019-10-16 10:56:51 +08:00
|
|
|
if (context_tracking_enabled()) {
|
2015-02-11 04:27:50 +08:00
|
|
|
if (prev_ctx != CONTEXT_KERNEL)
|
|
|
|
|
context_tracking_enter(prev_ctx);
|
2013-07-10 08:44:35 +08:00
|
|
|
}
|
2013-02-24 07:23:25 +08:00
|
|
|
}
|
|
|
|
|
|
2015-07-04 03:44:21 +08:00
|
|
|
|
|
|
|
|
/**
|
|
|
|
|
* ct_state() - return the current context tracking state if known
|
|
|
|
|
*
|
|
|
|
|
* Returns the current cpu's context tracking state if context tracking
|
|
|
|
|
* is enabled. If context tracking is disabled, returns
|
|
|
|
|
* CONTEXT_DISABLED. This should be used primarily for debugging.
|
|
|
|
|
*/
|
|
|
|
|
static inline enum ctx_state ct_state(void)
|
|
|
|
|
{
|
2019-10-16 10:56:51 +08:00
|
|
|
return context_tracking_enabled() ?
|
2015-07-04 03:44:21 +08:00
|
|
|
this_cpu_read(context_tracking.state) : CONTEXT_DISABLED;
|
|
|
|
|
}
|
2012-11-28 02:33:25 +08:00
|
|
|
#else
|
|
|
|
|
static inline void user_enter(void) { }
|
|
|
|
|
static inline void user_exit(void) { }
|
x86/entry: Avoid interrupt flag save and restore
Thanks to all the work that was done by Andy Lutomirski and others,
enter_from_user_mode() and prepare_exit_to_usermode() are now called only with
interrupts disabled. Let's provide them a version of user_enter()/user_exit()
that skips saving and restoring the interrupt flag.
On an AMD-based machine I tested this patch on, with force-enabled
context tracking, the speed-up in system calls was 90 clock cycles or 6%,
measured with the following simple benchmark:
#include <sys/signal.h>
#include <time.h>
#include <unistd.h>
#include <stdio.h>
unsigned long rdtsc()
{
unsigned long result;
asm volatile("rdtsc; shl $32, %%rdx; mov %%eax, %%eax\n"
"or %%rdx, %%rax" : "=a" (result) : : "rdx");
return result;
}
int main()
{
unsigned long tsc1, tsc2;
int pid = getpid();
int i;
tsc1 = rdtsc();
for (i = 0; i < 100000000; i++)
kill(pid, SIGWINCH);
tsc2 = rdtsc();
printf("%ld\n", tsc2 - tsc1);
}
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kvm@vger.kernel.org
Link: http://lkml.kernel.org/r/1466434712-31440-2-git-send-email-pbonzini@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-06-20 22:58:29 +08:00
|
|
|
static inline void user_enter_irqoff(void) { }
|
|
|
|
|
static inline void user_exit_irqoff(void) { }
|
2013-07-13 01:02:30 +08:00
|
|
|
static inline enum ctx_state exception_enter(void) { return 0; }
|
|
|
|
|
static inline void exception_exit(enum ctx_state prev_ctx) { }
|
2015-07-04 03:44:21 +08:00
|
|
|
static inline enum ctx_state ct_state(void) { return CONTEXT_DISABLED; }
|
2013-07-13 01:02:30 +08:00
|
|
|
#endif /* !CONFIG_CONTEXT_TRACKING */
|
2013-05-16 07:21:38 +08:00
|
|
|
|
2019-10-16 10:56:51 +08:00
|
|
|
#define CT_WARN_ON(cond) WARN_ON(context_tracking_enabled() && (cond))
|
2013-07-12 01:12:32 +08:00
|
|
|
|
|
|
|
|
#ifdef CONFIG_CONTEXT_TRACKING_FORCE
|
|
|
|
|
extern void context_tracking_init(void);
|
|
|
|
|
#else
|
|
|
|
|
static inline void context_tracking_init(void) { }
|
|
|
|
|
#endif /* CONFIG_CONTEXT_TRACKING_FORCE */
|
|
|
|
|
|
|
|
|
|
|
2013-07-13 01:02:30 +08:00
|
|
|
#ifdef CONFIG_VIRT_CPU_ACCOUNTING_GEN
|
2016-06-15 21:09:28 +08:00
|
|
|
/* must be called with irqs disabled */
|
|
|
|
|
static inline void guest_enter_irqoff(void)
|
2013-07-10 08:44:35 +08:00
|
|
|
{
|
2019-10-16 10:56:54 +08:00
|
|
|
if (vtime_accounting_enabled_this_cpu())
|
2013-07-10 08:44:35 +08:00
|
|
|
vtime_guest_enter(current);
|
|
|
|
|
else
|
|
|
|
|
current->flags |= PF_VCPU;
|
2015-02-11 04:27:54 +08:00
|
|
|
|
2019-10-16 10:56:51 +08:00
|
|
|
if (context_tracking_enabled())
|
2015-10-28 09:39:56 +08:00
|
|
|
__context_tracking_enter(CONTEXT_GUEST);
|
2016-06-15 21:09:28 +08:00
|
|
|
|
|
|
|
|
/* KVM does not hold any references to rcu protected data when it
|
|
|
|
|
* switches CPU into a guest mode. In fact switching to a guest mode
|
|
|
|
|
* is very similar to exiting to userspace from rcu point of view. In
|
|
|
|
|
* addition CPU may stay in a guest mode for quite a long time (up to
|
|
|
|
|
* one time slice). Lets treat guest mode as quiescent state, just like
|
|
|
|
|
* we do with user-mode execution.
|
|
|
|
|
*/
|
2019-10-16 10:56:52 +08:00
|
|
|
if (!context_tracking_enabled_this_cpu())
|
2016-06-15 21:09:28 +08:00
|
|
|
rcu_virt_note_context_switch(smp_processor_id());
|
2013-07-10 08:44:35 +08:00
|
|
|
}
|
|
|
|
|
|
2016-06-15 21:09:28 +08:00
|
|
|
static inline void guest_exit_irqoff(void)
|
2013-07-10 08:44:35 +08:00
|
|
|
{
|
2019-10-16 10:56:51 +08:00
|
|
|
if (context_tracking_enabled())
|
2015-10-28 09:39:56 +08:00
|
|
|
__context_tracking_exit(CONTEXT_GUEST);
|
2015-02-11 04:27:54 +08:00
|
|
|
|
2019-10-16 10:56:54 +08:00
|
|
|
if (vtime_accounting_enabled_this_cpu())
|
2013-07-10 08:44:35 +08:00
|
|
|
vtime_guest_exit(current);
|
|
|
|
|
else
|
|
|
|
|
current->flags &= ~PF_VCPU;
|
|
|
|
|
}
|
2013-07-12 01:42:13 +08:00
|
|
|
|
2013-07-13 01:02:30 +08:00
|
|
|
#else
|
2016-06-15 21:09:28 +08:00
|
|
|
static inline void guest_enter_irqoff(void)
|
2013-05-16 07:21:38 +08:00
|
|
|
{
|
2013-07-13 01:02:30 +08:00
|
|
|
/*
|
2013-07-13 01:05:14 +08:00
|
|
|
* This is running in ioctl context so its safe
|
|
|
|
|
* to assume that it's the stime pending cputime
|
|
|
|
|
* to flush.
|
2013-07-13 01:02:30 +08:00
|
|
|
*/
|
2019-10-04 00:17:44 +08:00
|
|
|
vtime_account_kernel(current);
|
2013-07-13 01:02:30 +08:00
|
|
|
current->flags |= PF_VCPU;
|
2016-06-15 21:09:28 +08:00
|
|
|
rcu_virt_note_context_switch(smp_processor_id());
|
2013-05-16 07:21:38 +08:00
|
|
|
}
|
|
|
|
|
|
2016-06-15 21:09:28 +08:00
|
|
|
static inline void guest_exit_irqoff(void)
|
2013-05-16 07:21:38 +08:00
|
|
|
{
|
2013-07-13 01:05:14 +08:00
|
|
|
/* Flush the guest cputime we spent on the guest */
|
2019-10-04 00:17:44 +08:00
|
|
|
vtime_account_kernel(current);
|
2013-07-13 01:02:30 +08:00
|
|
|
current->flags &= ~PF_VCPU;
|
2013-05-16 07:21:38 +08:00
|
|
|
}
|
2013-07-13 01:02:30 +08:00
|
|
|
#endif /* CONFIG_VIRT_CPU_ACCOUNTING_GEN */
|
2012-11-28 02:33:25 +08:00
|
|
|
|
2016-06-15 21:09:28 +08:00
|
|
|
static inline void guest_exit(void)
|
|
|
|
|
{
|
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
|
|
local_irq_save(flags);
|
|
|
|
|
guest_exit_irqoff();
|
|
|
|
|
local_irq_restore(flags);
|
|
|
|
|
}
|
|
|
|
|
|
2012-11-28 02:33:25 +08:00
|
|
|
#endif
|