linux-sg2042/fs/xfs/libxfs/xfs_alloc.h

240 lines
8.9 KiB
C
Raw Normal View History

/*
* Copyright (c) 2000-2002,2005 Silicon Graphics, Inc.
* All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it would be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write the Free Software Foundation,
* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef __XFS_ALLOC_H__
#define __XFS_ALLOC_H__
struct xfs_buf;
struct xfs_btree_cur;
struct xfs_mount;
struct xfs_perag;
struct xfs_trans;
extern struct workqueue_struct *xfs_alloc_wq;
/*
* Freespace allocation types. Argument to xfs_alloc_[v]extent.
*/
#define XFS_ALLOCTYPE_ANY_AG 0x01 /* allocate anywhere, use rotor */
#define XFS_ALLOCTYPE_FIRST_AG 0x02 /* ... start at ag 0 */
#define XFS_ALLOCTYPE_START_AG 0x04 /* anywhere, start in this a.g. */
#define XFS_ALLOCTYPE_THIS_AG 0x08 /* anywhere in this a.g. */
#define XFS_ALLOCTYPE_START_BNO 0x10 /* near this block else anywhere */
#define XFS_ALLOCTYPE_NEAR_BNO 0x20 /* in this a.g. and near this block */
#define XFS_ALLOCTYPE_THIS_BNO 0x40 /* at exactly this block */
/* this should become an enum again when the tracing code is fixed */
typedef unsigned int xfs_alloctype_t;
xfs: event tracing support Convert the old xfs tracing support that could only be used with the out of tree kdb and xfsidbg patches to use the generic event tracer. To use it make sure CONFIG_EVENT_TRACING is enabled and then enable all xfs trace channels by: echo 1 > /sys/kernel/debug/tracing/events/xfs/enable or alternatively enable single events by just doing the same in one event subdirectory, e.g. echo 1 > /sys/kernel/debug/tracing/events/xfs/xfs_ihold/enable or set more complex filters, etc. In Documentation/trace/events.txt all this is desctribed in more detail. To reads the events do a cat /sys/kernel/debug/tracing/trace Compared to the last posting this patch converts the tracing mostly to the one tracepoint per callsite model that other users of the new tracing facility also employ. This allows a very fine-grained control of the tracing, a cleaner output of the traces and also enables the perf tool to use each tracepoint as a virtual performance counter, allowing us to e.g. count how often certain workloads git various spots in XFS. Take a look at http://lwn.net/Articles/346470/ for some examples. Also the btree tracing isn't included at all yet, as it will require additional core tracing features not in mainline yet, I plan to deliver it later. And the really nice thing about this patch is that it actually removes many lines of code while adding this nice functionality: fs/xfs/Makefile | 8 fs/xfs/linux-2.6/xfs_acl.c | 1 fs/xfs/linux-2.6/xfs_aops.c | 52 - fs/xfs/linux-2.6/xfs_aops.h | 2 fs/xfs/linux-2.6/xfs_buf.c | 117 +-- fs/xfs/linux-2.6/xfs_buf.h | 33 fs/xfs/linux-2.6/xfs_fs_subr.c | 3 fs/xfs/linux-2.6/xfs_ioctl.c | 1 fs/xfs/linux-2.6/xfs_ioctl32.c | 1 fs/xfs/linux-2.6/xfs_iops.c | 1 fs/xfs/linux-2.6/xfs_linux.h | 1 fs/xfs/linux-2.6/xfs_lrw.c | 87 -- fs/xfs/linux-2.6/xfs_lrw.h | 45 - fs/xfs/linux-2.6/xfs_super.c | 104 --- fs/xfs/linux-2.6/xfs_super.h | 7 fs/xfs/linux-2.6/xfs_sync.c | 1 fs/xfs/linux-2.6/xfs_trace.c | 75 ++ fs/xfs/linux-2.6/xfs_trace.h | 1369 +++++++++++++++++++++++++++++++++++++++++ fs/xfs/linux-2.6/xfs_vnode.h | 4 fs/xfs/quota/xfs_dquot.c | 110 --- fs/xfs/quota/xfs_dquot.h | 21 fs/xfs/quota/xfs_qm.c | 40 - fs/xfs/quota/xfs_qm_syscalls.c | 4 fs/xfs/support/ktrace.c | 323 --------- fs/xfs/support/ktrace.h | 85 -- fs/xfs/xfs.h | 16 fs/xfs/xfs_ag.h | 14 fs/xfs/xfs_alloc.c | 230 +----- fs/xfs/xfs_alloc.h | 27 fs/xfs/xfs_alloc_btree.c | 1 fs/xfs/xfs_attr.c | 107 --- fs/xfs/xfs_attr.h | 10 fs/xfs/xfs_attr_leaf.c | 14 fs/xfs/xfs_attr_sf.h | 40 - fs/xfs/xfs_bmap.c | 507 +++------------ fs/xfs/xfs_bmap.h | 49 - fs/xfs/xfs_bmap_btree.c | 6 fs/xfs/xfs_btree.c | 5 fs/xfs/xfs_btree_trace.h | 17 fs/xfs/xfs_buf_item.c | 87 -- fs/xfs/xfs_buf_item.h | 20 fs/xfs/xfs_da_btree.c | 3 fs/xfs/xfs_da_btree.h | 7 fs/xfs/xfs_dfrag.c | 2 fs/xfs/xfs_dir2.c | 8 fs/xfs/xfs_dir2_block.c | 20 fs/xfs/xfs_dir2_leaf.c | 21 fs/xfs/xfs_dir2_node.c | 27 fs/xfs/xfs_dir2_sf.c | 26 fs/xfs/xfs_dir2_trace.c | 216 ------ fs/xfs/xfs_dir2_trace.h | 72 -- fs/xfs/xfs_filestream.c | 8 fs/xfs/xfs_fsops.c | 2 fs/xfs/xfs_iget.c | 111 --- fs/xfs/xfs_inode.c | 67 -- fs/xfs/xfs_inode.h | 76 -- fs/xfs/xfs_inode_item.c | 5 fs/xfs/xfs_iomap.c | 85 -- fs/xfs/xfs_iomap.h | 8 fs/xfs/xfs_log.c | 181 +---- fs/xfs/xfs_log_priv.h | 20 fs/xfs/xfs_log_recover.c | 1 fs/xfs/xfs_mount.c | 2 fs/xfs/xfs_quota.h | 8 fs/xfs/xfs_rename.c | 1 fs/xfs/xfs_rtalloc.c | 1 fs/xfs/xfs_rw.c | 3 fs/xfs/xfs_trans.h | 47 + fs/xfs/xfs_trans_buf.c | 62 - fs/xfs/xfs_vnodeops.c | 8 70 files changed, 2151 insertions(+), 2592 deletions(-) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-15 07:14:59 +08:00
#define XFS_ALLOC_TYPES \
{ XFS_ALLOCTYPE_ANY_AG, "ANY_AG" }, \
{ XFS_ALLOCTYPE_FIRST_AG, "FIRST_AG" }, \
{ XFS_ALLOCTYPE_START_AG, "START_AG" }, \
{ XFS_ALLOCTYPE_THIS_AG, "THIS_AG" }, \
{ XFS_ALLOCTYPE_START_BNO, "START_BNO" }, \
{ XFS_ALLOCTYPE_NEAR_BNO, "NEAR_BNO" }, \
{ XFS_ALLOCTYPE_THIS_BNO, "THIS_BNO" }
/*
* Flags for xfs_alloc_fix_freelist.
*/
#define XFS_ALLOC_FLAG_TRYLOCK 0x00000001 /* use trylock for buffer locking */
#define XFS_ALLOC_FLAG_FREEING 0x00000002 /* indicate caller is freeing extents*/
/*
* In order to avoid ENOSPC-related deadlock caused by
* out-of-order locking of AGF buffer (PV 947395), we place
* constraints on the relationship among actual allocations for
* data blocks, freelist blocks, and potential file data bmap
* btree blocks. However, these restrictions may result in no
* actual space allocated for a delayed extent, for example, a data
* block in a certain AG is allocated but there is no additional
* block for the additional bmap btree block due to a split of the
* bmap btree of the file. The result of this may lead to an
* infinite loop in xfssyncd when the file gets flushed to disk and
* all delayed extents need to be actually allocated. To get around
* this, we explicitly set aside a few blocks which will not be
* reserved in delayed allocation. Considering the minimum number of
* needed freelist blocks is 4 fsbs _per AG_, a potential split of file's bmap
* btree requires 1 fsb, so we set the number of set-aside blocks
* to 4 + 4*agcount.
*/
#define XFS_ALLOC_SET_ASIDE(mp) (4 + ((mp)->m_sb.sb_agcount * 4))
/*
* When deciding how much space to allocate out of an AG, we limit the
* allocation maximum size to the size the AG. However, we cannot use all the
* blocks in the AG - some are permanently used by metadata. These
* blocks are generally:
* - the AG superblock, AGF, AGI and AGFL
* - the AGF (bno and cnt) and AGI btree root blocks
* - 4 blocks on the AGFL according to XFS_ALLOC_SET_ASIDE() limits
*
* The AG headers are sector sized, so the amount of space they take up is
* dependent on filesystem geometry. The others are all single blocks.
*/
#define XFS_ALLOC_AG_MAX_USABLE(mp) \
((mp)->m_sb.sb_agblocks - XFS_BB_TO_FSB(mp, XFS_FSS_TO_BB(mp, 4)) - 7)
/*
* Argument structure for xfs_alloc routines.
* This is turned into a structure to avoid having 20 arguments passed
* down several levels of the stack.
*/
typedef struct xfs_alloc_arg {
struct xfs_trans *tp; /* transaction pointer */
struct xfs_mount *mp; /* file system mount point */
struct xfs_buf *agbp; /* buffer for a.g. freelist header */
struct xfs_perag *pag; /* per-ag struct for this agno */
struct xfs_inode *ip; /* for userdata zeroing method */
xfs_fsblock_t fsbno; /* file system block number */
xfs_agnumber_t agno; /* allocation group number */
xfs_agblock_t agbno; /* allocation group-relative block # */
xfs_extlen_t minlen; /* minimum size of extent */
xfs_extlen_t maxlen; /* maximum size of extent */
xfs_extlen_t mod; /* mod value for extent size */
xfs_extlen_t prod; /* prod value for extent size */
xfs_extlen_t minleft; /* min blocks must be left after us */
xfs_extlen_t total; /* total blocks needed in xaction */
xfs_extlen_t alignment; /* align answer to multiple of this */
xfs_extlen_t minalignslop; /* slop for minlen+alignment calcs */
xfs: support min/max agbno args in block allocator The block allocator supports various arguments to tweak block allocation behavior and set allocation requirements. The sparse inode chunk feature introduces a new requirement not supported by the current arguments. Sparse inode allocations must convert or merge into an inode record that describes a fixed length chunk (64 inodes x inodesize). Full inode chunk allocations by definition always result in valid inode records. Sparse chunk allocations are smaller and the associated records can refer to blocks not owned by the inode chunk. This model can result in invalid inode records in certain cases. For example, if a sparse allocation occurs near the start of an AG, the aligned inode record for that chunk might refer to agbno 0. If an allocation occurs towards the end of the AG and the AG size is not aligned, the inode record could refer to blocks beyond the end of the AG. While neither of these scenarios directly result in corruption, they both insert invalid inode records and at minimum cause repair to complain, are unlikely to merge into full chunks over time and set land mines for other areas of code. To guarantee sparse inode chunk allocation creates valid inode records, support the ability to specify an agbno range limit for XFS_ALLOCTYPE_NEAR_BNO block allocations. The min/max agbno's are specified in the allocation arguments and limit the block allocation algorithms to that range. The starting 'agbno' hint is clamped to the range if the specified agbno is out of range. If no sufficient extent is available within the range, the allocation fails. For backwards compatibility, the min/max fields can be initialized to 0 to disable range limiting (e.g., equivalent to min=0,max=agsize). Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-05-29 06:53:00 +08:00
xfs_agblock_t min_agbno; /* set an agbno range for NEAR allocs */
xfs_agblock_t max_agbno; /* ... */
xfs_extlen_t len; /* output: actual size of extent */
xfs_alloctype_t type; /* allocation type XFS_ALLOCTYPE_... */
xfs_alloctype_t otype; /* original allocation type */
char wasdel; /* set if allocation was prev delayed */
char wasfromfl; /* set if allocation is from freelist */
char isfl; /* set if is freelist blocks - !acctg */
char userdata; /* mask defining userdata treatment */
xfs_fsblock_t firstblock; /* io first block allocated */
xfs: add owner field to extent allocation and freeing For the rmap btree to work, we have to feed the extent owner information to the the allocation and freeing functions. This information is what will end up in the rmap btree that tracks allocated extents. While we technically don't need the owner information when freeing extents, passing it allows us to validate that the extent we are removing from the rmap btree actually belonged to the owner we expected it to belong to. We also define a special set of owner values for internal metadata that would otherwise have no owner. This allows us to tell the difference between metadata owned by different per-ag btrees, as well as static fs metadata (e.g. AG headers) and internal journal blocks. There are also a couple of special cases we need to take care of - during EFI recovery, we don't actually know who the original owner was, so we need to pass a wildcard to indicate that we aren't checking the owner for validity. We also need special handling in growfs, as we "free" the space in the last AG when extending it, but because it's new space it has no actual owner... While touching the xfs_bmap_add_free() function, re-order the parameters to put the struct xfs_mount first. Extend the owner field to include both the owner type and some sort of index within the owner. The index field will be used to support reverse mappings when reflink is enabled. When we're freeing extents from an EFI, we don't have the owner information available (rmap updates have their own redo items). xfs_free_extent therefore doesn't need to do an rmap update. Make sure that the log replay code signals this correctly. This is based upon a patch originally from Dave Chinner. It has been extended to add more owner information with the intent of helping recovery operations when things go wrong (e.g. offset of user data block in a file). [dchinner: de-shout the xfs_rmap_*_owner helpers] [darrick: minor style fixes suggested by Christoph Hellwig] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-08-03 09:33:42 +08:00
struct xfs_owner_info oinfo; /* owner of blocks being allocated */
} xfs_alloc_arg_t;
/*
* Defines for userdata
*/
#define XFS_ALLOC_USERDATA (1 << 0)/* allocation is for user data*/
#define XFS_ALLOC_INITIAL_USER_DATA (1 << 1)/* special case start of file */
#define XFS_ALLOC_USERDATA_ZERO (1 << 2)/* zero extent on allocation */
xfs_extlen_t xfs_alloc_longest_free_extent(struct xfs_mount *mp,
struct xfs_perag *pag, xfs_extlen_t need);
unsigned int xfs_alloc_min_freelist(struct xfs_mount *mp,
struct xfs_perag *pag);
/*
* Compute and fill in value of m_ag_maxlevels.
*/
void
xfs_alloc_compute_maxlevels(
struct xfs_mount *mp); /* file system mount structure */
/*
* Get a block from the freelist.
* Returns with the buffer for the block gotten.
*/
int /* error */
xfs_alloc_get_freelist(
struct xfs_trans *tp, /* transaction pointer */
struct xfs_buf *agbp, /* buffer containing the agf structure */
[XFS] Lazy Superblock Counters When we have a couple of hundred transactions on the fly at once, they all typically modify the on disk superblock in some way. create/unclink/mkdir/rmdir modify inode counts, allocation/freeing modify free block counts. When these counts are modified in a transaction, they must eventually lock the superblock buffer and apply the mods. The buffer then remains locked until the transaction is committed into the incore log buffer. The result of this is that with enough transactions on the fly the incore superblock buffer becomes a bottleneck. The result of contention on the incore superblock buffer is that transaction rates fall - the more pressure that is put on the superblock buffer, the slower things go. The key to removing the contention is to not require the superblock fields in question to be locked. We do that by not marking the superblock dirty in the transaction. IOWs, we modify the incore superblock but do not modify the cached superblock buffer. In short, we do not log superblock modifications to critical fields in the superblock on every transaction. In fact we only do it just before we write the superblock to disk every sync period or just before unmount. This creates an interesting problem - if we don't log or write out the fields in every transaction, then how do the values get recovered after a crash? the answer is simple - we keep enough duplicate, logged information in other structures that we can reconstruct the correct count after log recovery has been performed. It is the AGF and AGI structures that contain the duplicate information; after recovery, we walk every AGI and AGF and sum their individual counters to get the correct value, and we do a transaction into the log to correct them. An optimisation of this is that if we have a clean unmount record, we know the value in the superblock is correct, so we can avoid the summation walk under normal conditions and so mount/recovery times do not change under normal operation. One wrinkle that was discovered during development was that the blocks used in the freespace btrees are never accounted for in the AGF counters. This was once a valid optimisation to make; when the filesystem is full, the free space btrees are empty and consume no space. Hence when it matters, the "accounting" is correct. But that means the when we do the AGF summations, we would not have a correct count and xfs_check would complain. Hence a new counter was added to track the number of blocks used by the free space btrees. This is an *on-disk format change*. As a result of this, lazy superblock counters are a mkfs option and at the moment on linux there is no way to convert an old filesystem. This is possible - xfs_db can be used to twiddle the right bits and then xfs_repair will do the format conversion for you. Similarly, you can convert backwards as well. At some point we'll add functionality to xfs_admin to do the bit twiddling easily.... SGI-PV: 964999 SGI-Modid: xfs-linux-melb:xfs-kern:28652a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-24 13:26:31 +08:00
xfs_agblock_t *bnop, /* block address retrieved from freelist */
int btreeblk); /* destination is a AGF btree */
/*
* Log the given fields from the agf structure.
*/
void
xfs_alloc_log_agf(
struct xfs_trans *tp, /* transaction pointer */
struct xfs_buf *bp, /* buffer for a.g. freelist header */
int fields);/* mask of fields to be logged (XFS_AGF_...) */
/*
* Interface for inode allocation to force the pag data to be initialized.
*/
int /* error */
xfs_alloc_pagf_init(
struct xfs_mount *mp, /* file system mount structure */
struct xfs_trans *tp, /* transaction pointer */
xfs_agnumber_t agno, /* allocation group number */
int flags); /* XFS_ALLOC_FLAGS_... */
/*
* Put the block on the freelist for the allocation group.
*/
int /* error */
xfs_alloc_put_freelist(
struct xfs_trans *tp, /* transaction pointer */
struct xfs_buf *agbp, /* buffer for a.g. freelist header */
struct xfs_buf *agflbp,/* buffer for a.g. free block array */
[XFS] Lazy Superblock Counters When we have a couple of hundred transactions on the fly at once, they all typically modify the on disk superblock in some way. create/unclink/mkdir/rmdir modify inode counts, allocation/freeing modify free block counts. When these counts are modified in a transaction, they must eventually lock the superblock buffer and apply the mods. The buffer then remains locked until the transaction is committed into the incore log buffer. The result of this is that with enough transactions on the fly the incore superblock buffer becomes a bottleneck. The result of contention on the incore superblock buffer is that transaction rates fall - the more pressure that is put on the superblock buffer, the slower things go. The key to removing the contention is to not require the superblock fields in question to be locked. We do that by not marking the superblock dirty in the transaction. IOWs, we modify the incore superblock but do not modify the cached superblock buffer. In short, we do not log superblock modifications to critical fields in the superblock on every transaction. In fact we only do it just before we write the superblock to disk every sync period or just before unmount. This creates an interesting problem - if we don't log or write out the fields in every transaction, then how do the values get recovered after a crash? the answer is simple - we keep enough duplicate, logged information in other structures that we can reconstruct the correct count after log recovery has been performed. It is the AGF and AGI structures that contain the duplicate information; after recovery, we walk every AGI and AGF and sum their individual counters to get the correct value, and we do a transaction into the log to correct them. An optimisation of this is that if we have a clean unmount record, we know the value in the superblock is correct, so we can avoid the summation walk under normal conditions and so mount/recovery times do not change under normal operation. One wrinkle that was discovered during development was that the blocks used in the freespace btrees are never accounted for in the AGF counters. This was once a valid optimisation to make; when the filesystem is full, the free space btrees are empty and consume no space. Hence when it matters, the "accounting" is correct. But that means the when we do the AGF summations, we would not have a correct count and xfs_check would complain. Hence a new counter was added to track the number of blocks used by the free space btrees. This is an *on-disk format change*. As a result of this, lazy superblock counters are a mkfs option and at the moment on linux there is no way to convert an old filesystem. This is possible - xfs_db can be used to twiddle the right bits and then xfs_repair will do the format conversion for you. Similarly, you can convert backwards as well. At some point we'll add functionality to xfs_admin to do the bit twiddling easily.... SGI-PV: 964999 SGI-Modid: xfs-linux-melb:xfs-kern:28652a Signed-off-by: David Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-24 13:26:31 +08:00
xfs_agblock_t bno, /* block being freed */
int btreeblk); /* owner was a AGF btree */
/*
* Read in the allocation group header (free/alloc section).
*/
int /* error */
xfs_alloc_read_agf(
struct xfs_mount *mp, /* mount point structure */
struct xfs_trans *tp, /* transaction pointer */
xfs_agnumber_t agno, /* allocation group number */
int flags, /* XFS_ALLOC_FLAG_... */
struct xfs_buf **bpp); /* buffer for the ag freelist header */
/*
* Allocate an extent (variable-size).
*/
int /* error */
xfs_alloc_vextent(
xfs_alloc_arg_t *args); /* allocation argument structure */
/*
* Free an extent.
*/
int /* error */
xfs_free_extent(
xfs: add owner field to extent allocation and freeing For the rmap btree to work, we have to feed the extent owner information to the the allocation and freeing functions. This information is what will end up in the rmap btree that tracks allocated extents. While we technically don't need the owner information when freeing extents, passing it allows us to validate that the extent we are removing from the rmap btree actually belonged to the owner we expected it to belong to. We also define a special set of owner values for internal metadata that would otherwise have no owner. This allows us to tell the difference between metadata owned by different per-ag btrees, as well as static fs metadata (e.g. AG headers) and internal journal blocks. There are also a couple of special cases we need to take care of - during EFI recovery, we don't actually know who the original owner was, so we need to pass a wildcard to indicate that we aren't checking the owner for validity. We also need special handling in growfs, as we "free" the space in the last AG when extending it, but because it's new space it has no actual owner... While touching the xfs_bmap_add_free() function, re-order the parameters to put the struct xfs_mount first. Extend the owner field to include both the owner type and some sort of index within the owner. The index field will be used to support reverse mappings when reflink is enabled. When we're freeing extents from an EFI, we don't have the owner information available (rmap updates have their own redo items). xfs_free_extent therefore doesn't need to do an rmap update. Make sure that the log replay code signals this correctly. This is based upon a patch originally from Dave Chinner. It has been extended to add more owner information with the intent of helping recovery operations when things go wrong (e.g. offset of user data block in a file). [dchinner: de-shout the xfs_rmap_*_owner helpers] [darrick: minor style fixes suggested by Christoph Hellwig] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-08-03 09:33:42 +08:00
struct xfs_trans *tp, /* transaction pointer */
xfs_fsblock_t bno, /* starting block number of extent */
xfs_extlen_t len, /* length of extent */
struct xfs_owner_info *oinfo);/* extent owner */
xfs: fix fstrim offset calculations xfs_ioc_fstrim() doesn't treat the incoming offset and length correctly. It treats them as a filesystem block address, rather than a disk address. This is wrong because the range passed in is a linear representation, while the filesystem block address notation is a sparse representation. Hence we cannot convert the range direct to filesystem block units and then use that for calculating the range to trim. While this sounds dangerous, the problem is limited to calculating what AGs need to be trimmed. The code that calcuates the actual ranges to trim gets the right result (i.e. only ever discards free space), even though it uses the wrong ranges to limit what is trimmed. Hence this is not a bug that endangers user data. Fix this by treating the range as a disk address range and use the appropriate functions to convert the range into the desired formats for calculations. Further, fix the first free extent lookup (the longest) to actually find the largest free extent. Currently this lookup uses a <= lookup, which results in finding the extent to the left of the largest because we can never get an exact match on the largest extent. This is due to the fact that while we know it's size, we don't know it's location and so the exact match fails and we move one record to the left to get the next largest extent. Instead, use a >= search so that the lookup returns the largest extent regardless of the fact we don't get an exact match on it. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-03-22 13:15:12 +08:00
int /* error */
xfs_alloc_lookup_ge(
struct xfs_btree_cur *cur, /* btree cursor */
xfs_agblock_t bno, /* starting block of extent */
xfs_extlen_t len, /* length of extent */
int *stat); /* success/failure */
int /* error */
xfs_alloc_get_rec(
struct xfs_btree_cur *cur, /* btree cursor */
xfs_agblock_t *bno, /* output: starting block of extent */
xfs_extlen_t *len, /* output: length of extent */
int *stat); /* output: success/failure */
int xfs_read_agf(struct xfs_mount *mp, struct xfs_trans *tp,
xfs_agnumber_t agno, int flags, struct xfs_buf **bpp);
int xfs_alloc_fix_freelist(struct xfs_alloc_arg *args, int flags);
int xfs_free_extent_fix_freelist(struct xfs_trans *tp, xfs_agnumber_t agno,
struct xfs_buf **agbp);
xfs_extlen_t xfs_prealloc_blocks(struct xfs_mount *mp);
#endif /* __XFS_ALLOC_H__ */