linux-sg2042/include/linux/ceph/osd_client.h

529 lines
14 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _FS_CEPH_OSD_CLIENT_H
#define _FS_CEPH_OSD_CLIENT_H
#include <linux/bitrev.h>
#include <linux/completion.h>
#include <linux/kref.h>
#include <linux/mempool.h>
#include <linux/rbtree.h>
#include <linux/refcount.h>
#include <linux/ceph/types.h>
#include <linux/ceph/osdmap.h>
#include <linux/ceph/messenger.h>
#include <linux/ceph/msgpool.h>
#include <linux/ceph/auth.h>
libceph: always allow trail in osd request An osd request structure contains an optional trail portion, which if present will contain data to be passed in the payload portion of the message containing the request. The trail field is a ceph_pagelist pointer, and if null it indicates there is no trail. A ceph_pagelist structure contains a length field, and it can legitimately hold value 0. Make use of this to change the interpretation of the "trail" of an osd request so that every osd request has trailing data, it just might have length 0. This means we change the r_trail field in a ceph_osd_request structure from a pointer to a structure that is always initialized. Note that in ceph_osdc_start_request(), the trail pointer (or now address of that structure) is assigned to a ceph message's trail field. Here's why that's still OK (looking at net/ceph/messenger.c): - What would have resulted in a null pointer previously will now refer to a 0-length page list. That message trail pointer is used in two functions, write_partial_msg_pages() and out_msg_pos_next(). - In write_partial_msg_pages(), a null page list pointer is handled the same as a message with 0-length trail, and both result in a "in_trail" variable set to false. The trail pointer is only used if in_trail is true. - The only other place the message trail pointer is used is out_msg_pos_next(). That function is only called by write_partial_msg_pages() and only touches the trail pointer if the in_trail value it is passed is true. Therefore a null ceph_msg->trail pointer is equivalent to a non-null pointer referring to a 0-length page list structure. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2012-11-14 11:11:15 +08:00
#include <linux/ceph/pagelist.h>
struct ceph_msg;
struct ceph_snap_context;
struct ceph_osd_request;
struct ceph_osd_client;
/*
* completion callback for async writepages
*/
typedef void (*ceph_osdc_callback_t)(struct ceph_osd_request *);
#define CEPH_HOMELESS_OSD -1
/* a given osd we're communicating with */
struct ceph_osd {
refcount_t o_ref;
struct ceph_osd_client *o_osdc;
int o_osd;
int o_incarnation;
struct rb_node o_node;
struct ceph_connection o_con;
struct rb_root o_requests;
struct rb_root o_linger_requests;
struct rb_root o_backoff_mappings;
struct rb_root o_backoffs_by_id;
struct list_head o_osd_lru;
struct ceph_auth_handshake o_auth;
unsigned long lru_ttl;
struct list_head o_keepalive_item;
struct mutex lock;
};
#define CEPH_OSD_SLAB_OPS 2
#define CEPH_OSD_MAX_OPS 16
enum ceph_osd_data_type {
CEPH_OSD_DATA_TYPE_NONE = 0,
CEPH_OSD_DATA_TYPE_PAGES,
CEPH_OSD_DATA_TYPE_PAGELIST,
#ifdef CONFIG_BLOCK
CEPH_OSD_DATA_TYPE_BIO,
#endif /* CONFIG_BLOCK */
};
struct ceph_osd_data {
enum ceph_osd_data_type type;
union {
struct {
struct page **pages;
u64 length;
u32 alignment;
bool pages_from_pool;
bool own_pages;
};
struct ceph_pagelist *pagelist;
#ifdef CONFIG_BLOCK
struct {
struct ceph_bio_iter bio_pos;
u32 bio_length;
};
#endif /* CONFIG_BLOCK */
};
};
struct ceph_osd_req_op {
u16 op; /* CEPH_OSD_OP_* */
u32 flags; /* CEPH_OSD_OP_FLAG_* */
u32 indata_len; /* request */
u32 outdata_len; /* reply */
s32 rval;
union {
struct ceph_osd_data raw_data_in;
struct {
u64 offset, length;
u64 truncate_size;
u32 truncate_seq;
struct ceph_osd_data osd_data;
} extent;
struct {
u32 name_len;
u32 value_len;
__u8 cmp_op; /* CEPH_OSD_CMPXATTR_OP_* */
__u8 cmp_mode; /* CEPH_OSD_CMPXATTR_MODE_* */
struct ceph_osd_data osd_data;
} xattr;
struct {
const char *class_name;
const char *method_name;
struct ceph_osd_data request_info;
struct ceph_osd_data request_data;
struct ceph_osd_data response_data;
__u8 class_len;
__u8 method_len;
u32 indata_len;
} cls;
struct {
u64 cookie;
__u8 op; /* CEPH_OSD_WATCH_OP_ */
u32 gen;
} watch;
struct {
struct ceph_osd_data request_data;
} notify_ack;
struct {
u64 cookie;
struct ceph_osd_data request_data;
struct ceph_osd_data response_data;
} notify;
struct {
struct ceph_osd_data response_data;
} list_watchers;
struct {
u64 expected_object_size;
u64 expected_write_size;
} alloc_hint;
};
};
struct ceph_osd_request_target {
struct ceph_object_id base_oid;
struct ceph_object_locator base_oloc;
struct ceph_object_id target_oid;
struct ceph_object_locator target_oloc;
struct ceph_pg pgid; /* last raw pg we mapped to */
struct ceph_spg spgid; /* last actual spg we mapped to */
u32 pg_num;
u32 pg_num_mask;
struct ceph_osds acting;
struct ceph_osds up;
int size;
int min_size;
bool sort_bitwise;
bool recovery_deletes;
unsigned int flags; /* CEPH_OSD_FLAG_* */
bool paused;
u32 epoch;
u32 last_force_resend;
int osd;
};
/* an in-flight request */
struct ceph_osd_request {
u64 r_tid; /* unique for this client */
struct rb_node r_node;
struct rb_node r_mc_node; /* map check */
struct ceph_osd *r_osd;
struct ceph_osd_request_target r_t;
#define r_base_oid r_t.base_oid
#define r_base_oloc r_t.base_oloc
#define r_flags r_t.flags
struct ceph_msg *r_request, *r_reply;
u32 r_sent; /* >0 if r_request is sending/sent */
/* request osd ops array */
unsigned int r_num_ops;
int r_result;
struct ceph_osd_client *r_osdc;
struct kref r_kref;
bool r_mempool;
struct completion r_completion; /* private to osd_client.c */
libceph: change how "safe" callback is used An osd request currently has two callbacks. They inform the initiator of the request when we've received confirmation for the target osd that a request was received, and when the osd indicates all changes described by the request are durable. The only time the second callback is used is in the ceph file system for a synchronous write. There's a race that makes some handling of this case unsafe. This patch addresses this problem. The error handling for this callback is also kind of gross, and this patch changes that as well. In ceph_sync_write(), if a safe callback is requested we want to add the request on the ceph inode's unsafe items list. Because items on this list must have their tid set (by ceph_osd_start_request()), the request added *after* the call to that function returns. The problem with this is that there's a race between starting the request and adding it to the unsafe items list; the request may already be complete before ceph_sync_write() even begins to put it on the list. To address this, we change the way the "safe" callback is used. Rather than just calling it when the request is "safe", we use it to notify the initiator the bounds (start and end) of the period during which the request is *unsafe*. So the initiator gets notified just before the request gets sent to the osd (when it is "unsafe"), and again when it's known the results are durable (it's no longer unsafe). The first call will get made in __send_request(), just before the request message gets sent to the messenger for the first time. That function is only called by __send_queued(), which is always called with the osd client's request mutex held. We then have this callback function insert the request on the ceph inode's unsafe list when we're told the request is unsafe. This will avoid the race because this call will be made under protection of the osd client's request mutex. It also nicely groups the setup and cleanup of the state associated with managing unsafe requests. The name of the "safe" callback field is changed to "unsafe" to better reflect its new purpose. It has a Boolean "unsafe" parameter to indicate whether the request is becoming unsafe or is now safe. Because the "msg" parameter wasn't used, we drop that. This resolves the original problem reportedin: http://tracker.ceph.com/issues/4706 Reported-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Sage Weil <sage@inktank.com>
2013-04-16 00:20:42 +08:00
ceph_osdc_callback_t r_callback;
struct list_head r_unsafe_item;
struct inode *r_inode; /* for use by callbacks */
void *r_priv; /* ditto */
/* set by submitter */
u64 r_snapid; /* for reads, CEPH_NOSNAP o/w */
struct ceph_snap_context *r_snapc; /* for writes */
struct timespec r_mtime; /* ditto */
u64 r_data_offset; /* ditto */
bool r_linger; /* don't resend on failure */
bool r_abort_on_full; /* return ENOSPC when full */
/* internal */
unsigned long r_stamp; /* jiffies, send or check time */
unsigned long r_start_stamp; /* jiffies */
int r_attempts;
u32 r_map_dne_bound;
struct ceph_osd_req_op r_ops[];
};
struct ceph_request_redirect {
struct ceph_object_locator oloc;
};
/*
* osd request identifier
*
* caller name + incarnation# + tid to unique identify this request
*/
struct ceph_osd_reqid {
struct ceph_entity_name name;
__le64 tid;
__le32 inc;
} __packed;
struct ceph_blkin_trace_info {
__le64 trace_id;
__le64 span_id;
__le64 parent_span_id;
} __packed;
typedef void (*rados_watchcb2_t)(void *arg, u64 notify_id, u64 cookie,
u64 notifier_id, void *data, size_t data_len);
typedef void (*rados_watcherrcb_t)(void *arg, u64 cookie, int err);
struct ceph_osd_linger_request {
struct ceph_osd_client *osdc;
u64 linger_id;
bool committed;
bool is_watch; /* watch or notify */
struct ceph_osd *osd;
struct ceph_osd_request *reg_req;
struct ceph_osd_request *ping_req;
unsigned long ping_sent;
unsigned long watch_valid_thru;
struct list_head pending_lworks;
struct ceph_osd_request_target t;
u32 map_dne_bound;
struct timespec mtime;
struct kref kref;
struct mutex lock;
struct rb_node node; /* osd */
struct rb_node osdc_node; /* osdc */
struct rb_node mc_node; /* map check */
struct list_head scan_item;
struct completion reg_commit_wait;
struct completion notify_finish_wait;
int reg_commit_error;
int notify_finish_error;
int last_error;
u32 register_gen;
u64 notify_id;
rados_watchcb2_t wcb;
rados_watcherrcb_t errcb;
void *data;
struct page ***preply_pages;
size_t *preply_len;
};
struct ceph_watch_item {
struct ceph_entity_name name;
u64 cookie;
struct ceph_entity_addr addr;
};
struct ceph_spg_mapping {
struct rb_node node;
struct ceph_spg spgid;
struct rb_root backoffs;
};
struct ceph_hobject_id {
void *key;
size_t key_len;
void *oid;
size_t oid_len;
u64 snapid;
u32 hash;
u8 is_max;
void *nspace;
size_t nspace_len;
s64 pool;
/* cache */
u32 hash_reverse_bits;
};
static inline void ceph_hoid_build_hash_cache(struct ceph_hobject_id *hoid)
{
hoid->hash_reverse_bits = bitrev32(hoid->hash);
}
/*
* PG-wide backoff: [begin, end)
* per-object backoff: begin == end
*/
struct ceph_osd_backoff {
struct rb_node spg_node;
struct rb_node id_node;
struct ceph_spg spgid;
u64 id;
struct ceph_hobject_id *begin;
struct ceph_hobject_id *end;
};
#define CEPH_LINGER_ID_START 0xffff000000000000ULL
struct ceph_osd_client {
struct ceph_client *client;
struct ceph_osdmap *osdmap; /* current map */
struct rw_semaphore lock;
struct rb_root osds; /* osds */
struct list_head osd_lru; /* idle osds */
spinlock_t osd_lru_lock;
u32 epoch_barrier;
struct ceph_osd homeless_osd;
atomic64_t last_tid; /* tid of last request */
u64 last_linger_id;
struct rb_root linger_requests; /* lingering requests */
struct rb_root map_checks;
struct rb_root linger_map_checks;
atomic_t num_requests;
atomic_t num_homeless;
struct delayed_work timeout_work;
struct delayed_work osds_timeout_work;
#ifdef CONFIG_DEBUG_FS
struct dentry *debugfs_file;
#endif
mempool_t *req_mempool;
struct ceph_msgpool msgpool_op;
struct ceph_msgpool msgpool_op_reply;
struct workqueue_struct *notify_wq;
};
static inline bool ceph_osdmap_flag(struct ceph_osd_client *osdc, int flag)
{
return osdc->osdmap->flags & flag;
}
extern int ceph_osdc_setup(void);
extern void ceph_osdc_cleanup(void);
extern int ceph_osdc_init(struct ceph_osd_client *osdc,
struct ceph_client *client);
extern void ceph_osdc_stop(struct ceph_osd_client *osdc);
extern void ceph_osdc_handle_reply(struct ceph_osd_client *osdc,
struct ceph_msg *msg);
extern void ceph_osdc_handle_map(struct ceph_osd_client *osdc,
struct ceph_msg *msg);
void ceph_osdc_update_epoch_barrier(struct ceph_osd_client *osdc, u32 eb);
extern void osd_req_op_init(struct ceph_osd_request *osd_req,
unsigned int which, u16 opcode, u32 flags);
extern void osd_req_op_raw_data_in_pages(struct ceph_osd_request *,
unsigned int which,
struct page **pages, u64 length,
u32 alignment, bool pages_from_pool,
bool own_pages);
extern void osd_req_op_extent_init(struct ceph_osd_request *osd_req,
unsigned int which, u16 opcode,
libceph: define source request op functions The rbd code has a function that allocates and populates a ceph_osd_req_op structure (the in-core version of an osd request operation). When reviewed, Josh suggested two things: that the big varargs function might be better split into type-specific functions; and that this functionality really belongs in the osd client rather than rbd. This patch implements both of Josh's suggestions. It breaks up the rbd function into separate functions and defines them in the osd client module as exported interfaces. Unlike the rbd version, however, the functions don't allocate an osd_req_op structure; they are provided the address of one and that is initialized instead. The rbd function has been eliminated and calls to it have been replaced by calls to the new routines. The rbd code now now use a stack (struct) variable to hold the op rather than allocating and freeing it each time. For now only the capabilities used by rbd are implemented. Implementing all the other osd op types, and making the rest of the code use it will be done separately, in the next few patches. Note that only the extent, cls, and watch portions of the ceph_osd_req_op structure are currently used. Delete the others (xattr, pgls, and snap) from its definition so nobody thinks it's actually implemented or needed. We can add it back again later if needed, when we know it's been tested. This (and a few follow-on patches) resolves: http://tracker.ceph.com/issues/3861 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-03-14 09:50:00 +08:00
u64 offset, u64 length,
u64 truncate_size, u32 truncate_seq);
extern void osd_req_op_extent_update(struct ceph_osd_request *osd_req,
unsigned int which, u64 length);
extern void osd_req_op_extent_dup_last(struct ceph_osd_request *osd_req,
unsigned int which, u64 offset_inc);
extern struct ceph_osd_data *osd_req_op_extent_osd_data(
struct ceph_osd_request *osd_req,
unsigned int which);
extern void osd_req_op_extent_osd_data_pages(struct ceph_osd_request *,
unsigned int which,
struct page **pages, u64 length,
u32 alignment, bool pages_from_pool,
bool own_pages);
extern void osd_req_op_extent_osd_data_pagelist(struct ceph_osd_request *,
unsigned int which,
struct ceph_pagelist *pagelist);
#ifdef CONFIG_BLOCK
void osd_req_op_extent_osd_data_bio(struct ceph_osd_request *osd_req,
unsigned int which,
struct ceph_bio_iter *bio_pos,
u32 bio_length);
#endif /* CONFIG_BLOCK */
extern void osd_req_op_cls_request_data_pagelist(struct ceph_osd_request *,
unsigned int which,
struct ceph_pagelist *pagelist);
extern void osd_req_op_cls_request_data_pages(struct ceph_osd_request *,
unsigned int which,
struct page **pages, u64 length,
u32 alignment, bool pages_from_pool,
bool own_pages);
extern void osd_req_op_cls_response_data_pages(struct ceph_osd_request *,
unsigned int which,
struct page **pages, u64 length,
u32 alignment, bool pages_from_pool,
bool own_pages);
extern void osd_req_op_cls_init(struct ceph_osd_request *osd_req,
unsigned int which, u16 opcode,
const char *class, const char *method);
extern int osd_req_op_xattr_init(struct ceph_osd_request *osd_req, unsigned int which,
u16 opcode, const char *name, const void *value,
size_t size, u8 cmp_op, u8 cmp_mode);
extern void osd_req_op_alloc_hint_init(struct ceph_osd_request *osd_req,
unsigned int which,
u64 expected_object_size,
u64 expected_write_size);
libceph: define source request op functions The rbd code has a function that allocates and populates a ceph_osd_req_op structure (the in-core version of an osd request operation). When reviewed, Josh suggested two things: that the big varargs function might be better split into type-specific functions; and that this functionality really belongs in the osd client rather than rbd. This patch implements both of Josh's suggestions. It breaks up the rbd function into separate functions and defines them in the osd client module as exported interfaces. Unlike the rbd version, however, the functions don't allocate an osd_req_op structure; they are provided the address of one and that is initialized instead. The rbd function has been eliminated and calls to it have been replaced by calls to the new routines. The rbd code now now use a stack (struct) variable to hold the op rather than allocating and freeing it each time. For now only the capabilities used by rbd are implemented. Implementing all the other osd op types, and making the rest of the code use it will be done separately, in the next few patches. Note that only the extent, cls, and watch portions of the ceph_osd_req_op structure are currently used. Delete the others (xattr, pgls, and snap) from its definition so nobody thinks it's actually implemented or needed. We can add it back again later if needed, when we know it's been tested. This (and a few follow-on patches) resolves: http://tracker.ceph.com/issues/3861 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-03-14 09:50:00 +08:00
extern struct ceph_osd_request *ceph_osdc_alloc_request(struct ceph_osd_client *osdc,
struct ceph_snap_context *snapc,
unsigned int num_ops,
bool use_mempool,
gfp_t gfp_flags);
int ceph_osdc_alloc_messages(struct ceph_osd_request *req, gfp_t gfp);
extern struct ceph_osd_request *ceph_osdc_new_request(struct ceph_osd_client *,
struct ceph_file_layout *layout,
struct ceph_vino vino,
u64 offset, u64 *len,
unsigned int which, int num_ops,
int opcode, int flags,
struct ceph_snap_context *snapc,
u32 truncate_seq, u64 truncate_size,
bool use_mempool);
extern void ceph_osdc_get_request(struct ceph_osd_request *req);
extern void ceph_osdc_put_request(struct ceph_osd_request *req);
extern int ceph_osdc_start_request(struct ceph_osd_client *osdc,
struct ceph_osd_request *req,
bool nofail);
extern void ceph_osdc_cancel_request(struct ceph_osd_request *req);
extern int ceph_osdc_wait_request(struct ceph_osd_client *osdc,
struct ceph_osd_request *req);
extern void ceph_osdc_sync(struct ceph_osd_client *osdc);
extern void ceph_osdc_flush_notifies(struct ceph_osd_client *osdc);
void ceph_osdc_maybe_request_map(struct ceph_osd_client *osdc);
int ceph_osdc_call(struct ceph_osd_client *osdc,
struct ceph_object_id *oid,
struct ceph_object_locator *oloc,
const char *class, const char *method,
unsigned int flags,
struct page *req_page, size_t req_len,
struct page *resp_page, size_t *resp_len);
extern int ceph_osdc_readpages(struct ceph_osd_client *osdc,
struct ceph_vino vino,
struct ceph_file_layout *layout,
u64 off, u64 *plen,
u32 truncate_seq, u64 truncate_size,
struct page **pages, int nr_pages,
int page_align);
extern int ceph_osdc_writepages(struct ceph_osd_client *osdc,
struct ceph_vino vino,
struct ceph_file_layout *layout,
struct ceph_snap_context *sc,
u64 off, u64 len,
u32 truncate_seq, u64 truncate_size,
struct timespec *mtime,
struct page **pages, int nr_pages);
/* watch/notify */
struct ceph_osd_linger_request *
ceph_osdc_watch(struct ceph_osd_client *osdc,
struct ceph_object_id *oid,
struct ceph_object_locator *oloc,
rados_watchcb2_t wcb,
rados_watcherrcb_t errcb,
void *data);
int ceph_osdc_unwatch(struct ceph_osd_client *osdc,
struct ceph_osd_linger_request *lreq);
int ceph_osdc_notify_ack(struct ceph_osd_client *osdc,
struct ceph_object_id *oid,
struct ceph_object_locator *oloc,
u64 notify_id,
u64 cookie,
void *payload,
size_t payload_len);
int ceph_osdc_notify(struct ceph_osd_client *osdc,
struct ceph_object_id *oid,
struct ceph_object_locator *oloc,
void *payload,
size_t payload_len,
u32 timeout,
struct page ***preply_pages,
size_t *preply_len);
int ceph_osdc_watch_check(struct ceph_osd_client *osdc,
struct ceph_osd_linger_request *lreq);
int ceph_osdc_list_watchers(struct ceph_osd_client *osdc,
struct ceph_object_id *oid,
struct ceph_object_locator *oloc,
struct ceph_watch_item **watchers,
u32 *num_watchers);
#endif