hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
linux-sg2042/fs/xfs/xfs_trans_dquot.c

878 lines
21 KiB
C
Raw Normal View History

xfs: convert to SPDX license tags Remove the verbose license text from XFS files and replace them with SPDX tags. This does not change the license of any of the code, merely refers to the common, up-to-date license files in LICENSES/ This change was mostly scripted. fs/xfs/Makefile and fs/xfs/libxfs/xfs_fs.h were modified by hand, the rest were detected and modified by the following command: for f in `git grep -l "GNU General" fs/xfs/` ; do echo $f cat $f | awk -f hdr.awk > $f.new mv -f $f.new $f done And the hdr.awk script that did the modification (including detecting the difference between GPL-2.0 and GPL-2.0+ licenses) is as follows: $ cat hdr.awk BEGIN { hdr = 1.0 tag = "GPL-2.0" str = "" } /^ \* This program is free software/ { hdr = 2.0; next } /any later version./ { tag = "GPL-2.0+" next } /^ \*\// { if (hdr > 0.0) { print "// SPDX-License-Identifier: " tag print str print $0 str="" hdr = 0.0 next } print $0 next } /^ \* / { if (hdr > 1.0) next if (hdr > 0.0) { if (str != "") str = str "\n" str = str $0 next } print $0 next } /^ \*/ { if (hdr > 0.0) next print $0 next } // { if (hdr > 0.0) { if (str != "") str = str "\n" str = str $0 next } print $0 } END { } $ Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-06-06 10:42:14 +08:00
// SPDX-License-Identifier: GPL-2.0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
[XFS] Update license/copyright notices to match the prefered SGI boilerplate. SGI-PV: 913862 SGI-Modid: xfs-linux:xfs-kern:23917a Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-11-02 11:59:41 +08:00
* Copyright (c) 2000-2002 Silicon Graphics, Inc.
* All Rights Reserved.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
#include "xfs.h"
#include "xfs_fs.h"
xfs: create a shared header file for format-related information All of the buffer operations structures are needed to be exported for xfs_db, so move them all to a common location rather than spreading them all over the place. They are verifying the on-disk format, so while xfs_format.h might be a good place, it is not part of the on disk format. Hence we need to create a new header file that we centralise these related definitions. Start by moving the bffer operations structures, and then also move all the other definitions that have crept into xfs_log_format.h and xfs_format.h as there was no other shared header file to put them in. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-10-23 07:36:05 +08:00
#include "xfs_shared.h"
xfs: decouple log and transaction headers xfs_trans.h has a dependency on xfs_log.h for a couple of structures. Most code that does transactions doesn't need to know anything about the log, but this dependency means that they have to include xfs_log.h. Decouple the xfs_trans.h and xfs_log.h header files and clean up the includes to be in dependency order. In doing this, remove the direct include of xfs_trans_reserve.h from xfs_trans.h so that we remove the dependency between xfs_trans.h and xfs_mount.h. Hence the xfs_trans.h include can be moved to the indicate the actual dependencies other header files have on it. Note that these are kernel only header files, so this does not translate to any userspace changes at all. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-10-23 07:50:10 +08:00
#include "xfs_format.h"
#include "xfs_log_format.h"
#include "xfs_trans_resv.h"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include "xfs_mount.h"
#include "xfs_inode.h"
xfs: decouple log and transaction headers xfs_trans.h has a dependency on xfs_log.h for a couple of structures. Most code that does transactions doesn't need to know anything about the log, but this dependency means that they have to include xfs_log.h. Decouple the xfs_trans.h and xfs_log.h header files and clean up the includes to be in dependency order. In doing this, remove the direct include of xfs_trans_reserve.h from xfs_trans.h so that we remove the dependency between xfs_trans.h and xfs_mount.h. Hence the xfs_trans.h include can be moved to the indicate the actual dependencies other header files have on it. Note that these are kernel only header files, so this does not translate to any userspace changes at all. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-10-23 07:50:10 +08:00
#include "xfs_trans.h"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include "xfs_trans_priv.h"
xfs: decouple inode and bmap btree header files Currently the xfs_inode.h header has a dependency on the definition of the BMAP btree records as the inode fork includes an array of xfs_bmbt_rec_host_t objects in it's definition. Move all the btree format definitions from xfs_btree.h, xfs_bmap_btree.h, xfs_alloc_btree.h and xfs_ialloc_btree.h to xfs_format.h to continue the process of centralising the on-disk format definitions. With this done, the xfs inode definitions are no longer dependent on btree header files. The enables a massive culling of unnecessary includes, with close to 200 #include directives removed from the XFS kernel code base. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-10-23 07:51:50 +08:00
#include "xfs_quota.h"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include "xfs_qm.h"
STATIC void xfs_trans_alloc_dqinfo(xfs_trans_t *);
/*
* Add the locked dquot to the transaction.
* The dquot must be locked, and it cannot be associated with any
* transaction.
*/
void
xfs_trans_dqjoin(
xfs_trans_t *tp,
xfs_dquot_t *dqp)
{
ASSERT(XFS_DQ_IS_LOCKED(dqp));
xfs: simplify log item descriptor tracking Currently we track log item descriptor belonging to a transaction using a complex opencoded chunk allocator. This code has been there since day one and seems to work around the lack of an efficient slab allocator. This patch replaces it with dynamically allocated log item descriptors from a dedicated slab pool, linked to the transaction by a linked list. This allows to greatly simplify the log item descriptor tracking to the point where it's just a couple hundred lines in xfs_trans.c instead of a separate file. The external API has also been simplified while we're at it - the xfs_trans_add_item and xfs_trans_del_item functions to add/ delete items from a transaction have been simplified to the bare minium, and the xfs_trans_find_item function is replaced with a direct dereference of the li_desc field. All debug code walking the list of log items in a transaction is down to a simple list_for_each_entry. Note that we could easily use a singly linked list here instead of the double linked list from list.h as the fastpath only does deletion from sequential traversal. But given that we don't have one available as a library function yet I use the list.h functions for simplicity. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2010-06-23 16:11:15 +08:00
ASSERT(dqp->q_logitem.qli_dquot == dqp);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* Get a log_item_desc to point at the new item.
*/
xfs: simplify log item descriptor tracking Currently we track log item descriptor belonging to a transaction using a complex opencoded chunk allocator. This code has been there since day one and seems to work around the lack of an efficient slab allocator. This patch replaces it with dynamically allocated log item descriptors from a dedicated slab pool, linked to the transaction by a linked list. This allows to greatly simplify the log item descriptor tracking to the point where it's just a couple hundred lines in xfs_trans.c instead of a separate file. The external API has also been simplified while we're at it - the xfs_trans_add_item and xfs_trans_del_item functions to add/ delete items from a transaction have been simplified to the bare minium, and the xfs_trans_find_item function is replaced with a direct dereference of the li_desc field. All debug code walking the list of log items in a transaction is down to a simple list_for_each_entry. Note that we could easily use a singly linked list here instead of the double linked list from list.h as the fastpath only does deletion from sequential traversal. But given that we don't have one available as a library function yet I use the list.h functions for simplicity. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2010-06-23 16:11:15 +08:00
xfs_trans_add_item(tp, &dqp->q_logitem.qli_item);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
/*
* This is called to mark the dquot as needing
* to be logged when the transaction is committed. The dquot must
* already be associated with the given transaction.
* Note that it marks the entire transaction as dirty. In the ordinary
* case, this gets called via xfs_trans_commit, after the transaction
* is already dirty. However, there's nothing stop this from getting
* called directly, as done by xfs_qm_scall_setqlim. Hence, the TRANS_DIRTY
* flag.
*/
void
xfs_trans_log_dquot(
xfs_trans_t *tp,
xfs_dquot_t *dqp)
{
ASSERT(XFS_DQ_IS_LOCKED(dqp));
tp->t_flags |= XFS_TRANS_DIRTY;
xfs: get rid of the log item descriptor It's just a connector between a transaction and a log item. There's a 1:1 relationship between a log item descriptor and a log item, and a 1:1 relationship between a log item descriptor and a transaction. Both relationships are created and terminated at the same time, so why do we even have the descriptor? Replace it with a specific list_head in the log item and a new log item dirtied flag to replace the XFS_LID_DIRTY flag. Signed-Off-By: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> [darrick: fix up deferred agfl intent finish_item use of LID_DIRTY] Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-05-09 22:49:37 +08:00
set_bit(XFS_LI_DIRTY, &dqp->q_logitem.qli_item.li_flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
/*
* Carry forward whatever is left of the quota blk reservation to
* the spanky new transaction
*/
xfs: kill xfs_qmops Kill the quota ops function vector and replace it with direct calls or stubs in the CONFIG_XFS_QUOTA=n case. Make sure we check XFS_IS_QUOTA_RUNNING in the right spots. We can remove the number of those checks because the XFS_TRANS_DQ_DIRTY flag can't be set otherwise. This brings us back closer to the way this code worked in IRIX and earlier Linux versions, but we keep a lot of the more useful factoring of common code. Eventually we should also kill xfs_qm_bhv.c, but that's left for a later patch. Reduces the size of the source code by about 250 lines and the size of XFS module by about 1.5 kilobytes with quotas enabled: text data bss dec hex filename 615957 2960 3848 622765 980ad fs/xfs/xfs.o 617231 3152 3848 624231 98667 fs/xfs/xfs.o.old Fallout: - xfs_qm_dqattach is split into xfs_qm_dqattach_locked which expects the inode locked and xfs_qm_dqattach which does the locking around it, thus removing XFS_QMOPT_ILOCKED. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2009-06-08 21:33:32 +08:00
void
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
xfs_trans_dup_dqinfo(
xfs: kill the xfs_dqtrx_t typedef There's only a few uses left, so just kill the typedef while we're at it. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-04-18 07:30:24 +08:00
struct xfs_trans *otp,
struct xfs_trans *ntp)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
xfs: kill the xfs_dqtrx_t typedef There's only a few uses left, so just kill the typedef while we're at it. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-04-18 07:30:24 +08:00
struct xfs_dqtrx *oq, *nq;
int i, j;
struct xfs_dqtrx *oqa, *nqa;
uint64_t blk_res_used;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (!otp->t_dqinfo)
return;
xfs_trans_alloc_dqinfo(ntp);
/*
* Because the quota blk reservation is carried forward,
* it is also necessary to carry forward the DQ_DIRTY flag.
*/
xfs: Clean up xfs_trans_dup_dqinfo Fixed two missing spaces. Signed-off-by: Nan Jia <jiananmail@gmail.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-06-01 08:50:00 +08:00
if (otp->t_flags & XFS_TRANS_DQ_DIRTY)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ntp->t_flags |= XFS_TRANS_DQ_DIRTY;
xfs: Change xfs_dquot_acct to be a 2-dimensional array In preparation for combined pquota/gquota support, for the sake of readability, change xfs_dquot_acct to be a 2-dimensional array. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-06-28 06:25:09 +08:00
for (j = 0; j < XFS_QM_TRANS_DQTYPES; j++) {
oqa = otp->t_dqinfo->dqs[j];
nqa = ntp->t_dqinfo->dqs[j];
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
for (i = 0; i < XFS_QM_TRANS_MAXDQS; i++) {
xfs: fix quota block reservation leak when tp allocates and frees blocks Al Viro reports that generic/231 fails frequently on XFS and bisected the problem to the following commit: 5d11fb4b xfs: rework zero range to prevent invalid i_size updates ... which is just the first commit that happens to cause fsx to reproduce the problem. fsx reproduces via zero range calls. The aforementioned commit overhauls zero range to use hole punch and fallocate. As it turns out, the problem is reproducible on demand using basic hole punch as follows: $ mkfs.xfs -f -m crc=1,finobt=1 <dev> $ mount <dev> /mnt -o uquota $ xfs_io -f -c "falloc 0 50m" /mnt/file $ for i in $(seq 1 20); do xfs_io -c "fpunch ${i}m 32k" /mnt/file; done $ rm -f /mnt/file $ repquota -us /mnt ... User used soft hard grace used soft hard grace ---------------------------------------------------------------------- root -- 32K 0K 0K 3 0 0 A file is allocated with a single 50m extent. The extent count increases via hole punches until the bmap converts to btree format. The file is removed but quota reports 32k of space usage for the user. This reservation is effectively leaked for the lifetime of the mount. The reason this occurs is because the quota block reservation tracking is confused when a transaction happens to free and allocate blocks at the same time. Consider the following sequence of events: - tp is allocated from xfs_free_file_space() and reserves several blocks for btree management. Blocks are reserved against the dquot and marked as such in the transaction (qtrx->qt_blk_res). - 8 blocks are accounted free when the 32k range is punched out. xfs_trans_mod_dquot() is called with XFS_TRANS_DQ_BCOUNT and sets ->qt_bcount_delta to -8. - Subsequently, a block is allocated against the same transaction by xfs_bmap_extents_to_btree() for btree conversion. A call to xfs_trans_mod_dquot() increases qt_blk_res_used to 1 and qt_bcount_delta to -7. - The transaction is dup'd and committed by xfs_bmap_finish(). xfs_trans_dup_dqinfo() sets the first transaction up such that it has a matching qt_blk_res and qt_blk_res_used of 1. The remaining unused reservation is transferred to the duplicate tp. When the transactions are committed, the dquots are fixed up in xfs_trans_apply_dquot_deltas() according to one of two methods: 1.) If the transaction holds a block reservation (->qt_blk_res != 0), _only_ the unused portion reservation is unaccounted from the dquot. Note that the tp duplication behavior of xfs_bmap_finish() makes it such that qt_blk_res is typically 0 for tp's with unused reservation. 2.) Otherwise, the dquot is fixed up based on the block delta (->qt_bcount_delta) created by the transaction. Therefore, if a transaction has a negative qt_bcount_delta and positive qt_blk_res_used, the former set of blocks that have been removed from the file are never factored out of the in-core dquot reservation. Instead, *_apply_dquot_deltas() sees 1 block used out of a 1 block reservation and believes there is nothing to fix up. The on-disk d_bcount is updated independently from qt_bcount_delta, and thus is correct (and allows the quota usage to correct on remount). To deal with this situation, we effectively want the "used reservation" part of the transaction to be consistent with any freed blocks with respect to quota tracking. For example, if 8 blocks are freed, the subsequent single block allocation does not need to consume the initial reservation made by the tp. Instead, it simply borrows one from the previously freed. One possible implementation of such borrowing is to avoid the blks_res_used increment when bcount_delta is negative. This alone is flawed logic in that it only handles the case where blocks are freed before allocated, however. Rather than add more complexity to manage synchronization between bcount_delta and blks_res_used, kill the latter entirely. blk_res_used is only updated in one place and always in sync with delta_bcount. Therefore, the net block reservation consumption of the transaction is always available from bcount_delta. Calculate the reservation consumption on the fly where necessary based on whether the tp has a reservation and results in a positive net block delta on the inode. Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-06-01 05:15:37 +08:00
blk_res_used = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (oqa[i].qt_dquot == NULL)
break;
oq = &oqa[i];
nq = &nqa[i];
xfs: fix quota block reservation leak when tp allocates and frees blocks Al Viro reports that generic/231 fails frequently on XFS and bisected the problem to the following commit: 5d11fb4b xfs: rework zero range to prevent invalid i_size updates ... which is just the first commit that happens to cause fsx to reproduce the problem. fsx reproduces via zero range calls. The aforementioned commit overhauls zero range to use hole punch and fallocate. As it turns out, the problem is reproducible on demand using basic hole punch as follows: $ mkfs.xfs -f -m crc=1,finobt=1 <dev> $ mount <dev> /mnt -o uquota $ xfs_io -f -c "falloc 0 50m" /mnt/file $ for i in $(seq 1 20); do xfs_io -c "fpunch ${i}m 32k" /mnt/file; done $ rm -f /mnt/file $ repquota -us /mnt ... User used soft hard grace used soft hard grace ---------------------------------------------------------------------- root -- 32K 0K 0K 3 0 0 A file is allocated with a single 50m extent. The extent count increases via hole punches until the bmap converts to btree format. The file is removed but quota reports 32k of space usage for the user. This reservation is effectively leaked for the lifetime of the mount. The reason this occurs is because the quota block reservation tracking is confused when a transaction happens to free and allocate blocks at the same time. Consider the following sequence of events: - tp is allocated from xfs_free_file_space() and reserves several blocks for btree management. Blocks are reserved against the dquot and marked as such in the transaction (qtrx->qt_blk_res). - 8 blocks are accounted free when the 32k range is punched out. xfs_trans_mod_dquot() is called with XFS_TRANS_DQ_BCOUNT and sets ->qt_bcount_delta to -8. - Subsequently, a block is allocated against the same transaction by xfs_bmap_extents_to_btree() for btree conversion. A call to xfs_trans_mod_dquot() increases qt_blk_res_used to 1 and qt_bcount_delta to -7. - The transaction is dup'd and committed by xfs_bmap_finish(). xfs_trans_dup_dqinfo() sets the first transaction up such that it has a matching qt_blk_res and qt_blk_res_used of 1. The remaining unused reservation is transferred to the duplicate tp. When the transactions are committed, the dquots are fixed up in xfs_trans_apply_dquot_deltas() according to one of two methods: 1.) If the transaction holds a block reservation (->qt_blk_res != 0), _only_ the unused portion reservation is unaccounted from the dquot. Note that the tp duplication behavior of xfs_bmap_finish() makes it such that qt_blk_res is typically 0 for tp's with unused reservation. 2.) Otherwise, the dquot is fixed up based on the block delta (->qt_bcount_delta) created by the transaction. Therefore, if a transaction has a negative qt_bcount_delta and positive qt_blk_res_used, the former set of blocks that have been removed from the file are never factored out of the in-core dquot reservation. Instead, *_apply_dquot_deltas() sees 1 block used out of a 1 block reservation and believes there is nothing to fix up. The on-disk d_bcount is updated independently from qt_bcount_delta, and thus is correct (and allows the quota usage to correct on remount). To deal with this situation, we effectively want the "used reservation" part of the transaction to be consistent with any freed blocks with respect to quota tracking. For example, if 8 blocks are freed, the subsequent single block allocation does not need to consume the initial reservation made by the tp. Instead, it simply borrows one from the previously freed. One possible implementation of such borrowing is to avoid the blks_res_used increment when bcount_delta is negative. This alone is flawed logic in that it only handles the case where blocks are freed before allocated, however. Rather than add more complexity to manage synchronization between bcount_delta and blks_res_used, kill the latter entirely. blk_res_used is only updated in one place and always in sync with delta_bcount. Therefore, the net block reservation consumption of the transaction is always available from bcount_delta. Calculate the reservation consumption on the fly where necessary based on whether the tp has a reservation and results in a positive net block delta on the inode. Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-06-01 05:15:37 +08:00
if (oq->qt_blk_res && oq->qt_bcount_delta > 0)
blk_res_used = oq->qt_bcount_delta;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
nq->qt_dquot = oq->qt_dquot;
nq->qt_bcount_delta = nq->qt_icount_delta = 0;
nq->qt_rtbcount_delta = 0;
/*
* Transfer whatever is left of the reservations.
*/
xfs: fix quota block reservation leak when tp allocates and frees blocks Al Viro reports that generic/231 fails frequently on XFS and bisected the problem to the following commit: 5d11fb4b xfs: rework zero range to prevent invalid i_size updates ... which is just the first commit that happens to cause fsx to reproduce the problem. fsx reproduces via zero range calls. The aforementioned commit overhauls zero range to use hole punch and fallocate. As it turns out, the problem is reproducible on demand using basic hole punch as follows: $ mkfs.xfs -f -m crc=1,finobt=1 <dev> $ mount <dev> /mnt -o uquota $ xfs_io -f -c "falloc 0 50m" /mnt/file $ for i in $(seq 1 20); do xfs_io -c "fpunch ${i}m 32k" /mnt/file; done $ rm -f /mnt/file $ repquota -us /mnt ... User used soft hard grace used soft hard grace ---------------------------------------------------------------------- root -- 32K 0K 0K 3 0 0 A file is allocated with a single 50m extent. The extent count increases via hole punches until the bmap converts to btree format. The file is removed but quota reports 32k of space usage for the user. This reservation is effectively leaked for the lifetime of the mount. The reason this occurs is because the quota block reservation tracking is confused when a transaction happens to free and allocate blocks at the same time. Consider the following sequence of events: - tp is allocated from xfs_free_file_space() and reserves several blocks for btree management. Blocks are reserved against the dquot and marked as such in the transaction (qtrx->qt_blk_res). - 8 blocks are accounted free when the 32k range is punched out. xfs_trans_mod_dquot() is called with XFS_TRANS_DQ_BCOUNT and sets ->qt_bcount_delta to -8. - Subsequently, a block is allocated against the same transaction by xfs_bmap_extents_to_btree() for btree conversion. A call to xfs_trans_mod_dquot() increases qt_blk_res_used to 1 and qt_bcount_delta to -7. - The transaction is dup'd and committed by xfs_bmap_finish(). xfs_trans_dup_dqinfo() sets the first transaction up such that it has a matching qt_blk_res and qt_blk_res_used of 1. The remaining unused reservation is transferred to the duplicate tp. When the transactions are committed, the dquots are fixed up in xfs_trans_apply_dquot_deltas() according to one of two methods: 1.) If the transaction holds a block reservation (->qt_blk_res != 0), _only_ the unused portion reservation is unaccounted from the dquot. Note that the tp duplication behavior of xfs_bmap_finish() makes it such that qt_blk_res is typically 0 for tp's with unused reservation. 2.) Otherwise, the dquot is fixed up based on the block delta (->qt_bcount_delta) created by the transaction. Therefore, if a transaction has a negative qt_bcount_delta and positive qt_blk_res_used, the former set of blocks that have been removed from the file are never factored out of the in-core dquot reservation. Instead, *_apply_dquot_deltas() sees 1 block used out of a 1 block reservation and believes there is nothing to fix up. The on-disk d_bcount is updated independently from qt_bcount_delta, and thus is correct (and allows the quota usage to correct on remount). To deal with this situation, we effectively want the "used reservation" part of the transaction to be consistent with any freed blocks with respect to quota tracking. For example, if 8 blocks are freed, the subsequent single block allocation does not need to consume the initial reservation made by the tp. Instead, it simply borrows one from the previously freed. One possible implementation of such borrowing is to avoid the blks_res_used increment when bcount_delta is negative. This alone is flawed logic in that it only handles the case where blocks are freed before allocated, however. Rather than add more complexity to manage synchronization between bcount_delta and blks_res_used, kill the latter entirely. blk_res_used is only updated in one place and always in sync with delta_bcount. Therefore, the net block reservation consumption of the transaction is always available from bcount_delta. Calculate the reservation consumption on the fly where necessary based on whether the tp has a reservation and results in a positive net block delta on the inode. Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-06-01 05:15:37 +08:00
nq->qt_blk_res = oq->qt_blk_res - blk_res_used;
oq->qt_blk_res = blk_res_used;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
nq->qt_rtblk_res = oq->qt_rtblk_res -
oq->qt_rtblk_res_used;
oq->qt_rtblk_res = oq->qt_rtblk_res_used;
nq->qt_ino_res = oq->qt_ino_res - oq->qt_ino_res_used;
oq->qt_ino_res = oq->qt_ino_res_used;
}
}
}
/*
* Wrap around mod_dquot to account for both user and group quotas.
*/
xfs: kill xfs_qmops Kill the quota ops function vector and replace it with direct calls or stubs in the CONFIG_XFS_QUOTA=n case. Make sure we check XFS_IS_QUOTA_RUNNING in the right spots. We can remove the number of those checks because the XFS_TRANS_DQ_DIRTY flag can't be set otherwise. This brings us back closer to the way this code worked in IRIX and earlier Linux versions, but we keep a lot of the more useful factoring of common code. Eventually we should also kill xfs_qm_bhv.c, but that's left for a later patch. Reduces the size of the source code by about 250 lines and the size of XFS module by about 1.5 kilobytes with quotas enabled: text data bss dec hex filename 615957 2960 3848 622765 980ad fs/xfs/xfs.o 617231 3152 3848 624231 98667 fs/xfs/xfs.o.old Fallout: - xfs_qm_dqattach is split into xfs_qm_dqattach_locked which expects the inode locked and xfs_qm_dqattach which does the locking around it, thus removing XFS_QMOPT_ILOCKED. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2009-06-08 21:33:32 +08:00
void
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
xfs_trans_mod_dquot_byino(
xfs_trans_t *tp,
xfs_inode_t *ip,
uint field,
xfs: widen quota block counters to 64-bit integers Widen the incore quota transaction delta structure to treat block counters as 64-bit integers. This is a necessary addition so that we can widen the i_delayed_blks counter to be a 64-bit integer. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Allison Collins <allison.henderson@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-04-18 07:30:24 +08:00
int64_t delta)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
xfs: kill xfs_qmops Kill the quota ops function vector and replace it with direct calls or stubs in the CONFIG_XFS_QUOTA=n case. Make sure we check XFS_IS_QUOTA_RUNNING in the right spots. We can remove the number of those checks because the XFS_TRANS_DQ_DIRTY flag can't be set otherwise. This brings us back closer to the way this code worked in IRIX and earlier Linux versions, but we keep a lot of the more useful factoring of common code. Eventually we should also kill xfs_qm_bhv.c, but that's left for a later patch. Reduces the size of the source code by about 250 lines and the size of XFS module by about 1.5 kilobytes with quotas enabled: text data bss dec hex filename 615957 2960 3848 622765 980ad fs/xfs/xfs.o 617231 3152 3848 624231 98667 fs/xfs/xfs.o.old Fallout: - xfs_qm_dqattach is split into xfs_qm_dqattach_locked which expects the inode locked and xfs_qm_dqattach which does the locking around it, thus removing XFS_QMOPT_ILOCKED. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2009-06-08 21:33:32 +08:00
xfs_mount_t *mp = tp->t_mountp;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
xfs: kill xfs_qmops Kill the quota ops function vector and replace it with direct calls or stubs in the CONFIG_XFS_QUOTA=n case. Make sure we check XFS_IS_QUOTA_RUNNING in the right spots. We can remove the number of those checks because the XFS_TRANS_DQ_DIRTY flag can't be set otherwise. This brings us back closer to the way this code worked in IRIX and earlier Linux versions, but we keep a lot of the more useful factoring of common code. Eventually we should also kill xfs_qm_bhv.c, but that's left for a later patch. Reduces the size of the source code by about 250 lines and the size of XFS module by about 1.5 kilobytes with quotas enabled: text data bss dec hex filename 615957 2960 3848 622765 980ad fs/xfs/xfs.o 617231 3152 3848 624231 98667 fs/xfs/xfs.o.old Fallout: - xfs_qm_dqattach is split into xfs_qm_dqattach_locked which expects the inode locked and xfs_qm_dqattach which does the locking around it, thus removing XFS_QMOPT_ILOCKED. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2009-06-08 21:33:32 +08:00
if (!XFS_IS_QUOTA_RUNNING(mp) ||
!XFS_IS_QUOTA_ON(mp) ||
xfs: Define a new function xfs_is_quota_inode() In preparation for combined pquota/gquota support, define a new function to check if the given inode is a quota inode. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-06-28 06:25:04 +08:00
xfs_is_quota_inode(&mp->m_sb, ip->i_ino))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return;
if (tp->t_dqinfo == NULL)
xfs_trans_alloc_dqinfo(tp);
[XFS] Add support for project quota, based on Dan Knappes earlier work. SGI-PV: 932952 SGI-Modid: xfs-linux:xfs-kern:22805a Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-06-21 13:38:48 +08:00
if (XFS_IS_UQUOTA_ON(mp) && ip->i_udquot)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
(void) xfs_trans_mod_dquot(tp, ip->i_udquot, field, delta);
xfs: Add pquota fields where gquota is used. Add project quota changes to all the places where group quota field is used: * add separate project quota members into various structures * split project quota and group quotas so that instead of overriding the group quota members incore, the new project quota members are used instead * get rid of usage of the OQUOTA flag incore, in favor of separate group and project quota flags. * add a project dquot argument to various functions. Not using the pquotino field from superblock yet. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-07-11 13:00:40 +08:00
if (XFS_IS_GQUOTA_ON(mp) && ip->i_gdquot)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
(void) xfs_trans_mod_dquot(tp, ip->i_gdquot, field, delta);
xfs: Add pquota fields where gquota is used. Add project quota changes to all the places where group quota field is used: * add separate project quota members into various structures * split project quota and group quotas so that instead of overriding the group quota members incore, the new project quota members are used instead * get rid of usage of the OQUOTA flag incore, in favor of separate group and project quota flags. * add a project dquot argument to various functions. Not using the pquotino field from superblock yet. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-07-11 13:00:40 +08:00
if (XFS_IS_PQUOTA_ON(mp) && ip->i_pdquot)
(void) xfs_trans_mod_dquot(tp, ip->i_pdquot, field, delta);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
xfs: Code cleanup and removal of some typedef usage In preparation for combined pquota/gquota support, for the sake of readability, do some code cleanup surrounding the affected code. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-06-28 06:25:07 +08:00
STATIC struct xfs_dqtrx *
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
xfs_trans_get_dqtrx(
xfs: Code cleanup and removal of some typedef usage In preparation for combined pquota/gquota support, for the sake of readability, do some code cleanup surrounding the affected code. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-06-28 06:25:07 +08:00
struct xfs_trans *tp,
struct xfs_dquot *dqp)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
xfs: Code cleanup and removal of some typedef usage In preparation for combined pquota/gquota support, for the sake of readability, do some code cleanup surrounding the affected code. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-06-28 06:25:07 +08:00
int i;
struct xfs_dqtrx *qa;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
xfs: Change xfs_dquot_acct to be a 2-dimensional array In preparation for combined pquota/gquota support, for the sake of readability, change xfs_dquot_acct to be a 2-dimensional array. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-06-28 06:25:09 +08:00
if (XFS_QM_ISUDQ(dqp))
qa = tp->t_dqinfo->dqs[XFS_QM_TRANS_USR];
xfs: Add pquota fields where gquota is used. Add project quota changes to all the places where group quota field is used: * add separate project quota members into various structures * split project quota and group quotas so that instead of overriding the group quota members incore, the new project quota members are used instead * get rid of usage of the OQUOTA flag incore, in favor of separate group and project quota flags. * add a project dquot argument to various functions. Not using the pquotino field from superblock yet. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-07-11 13:00:40 +08:00
else if (XFS_QM_ISGDQ(dqp))
xfs: Change xfs_dquot_acct to be a 2-dimensional array In preparation for combined pquota/gquota support, for the sake of readability, change xfs_dquot_acct to be a 2-dimensional array. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-06-28 06:25:09 +08:00
qa = tp->t_dqinfo->dqs[XFS_QM_TRANS_GRP];
xfs: Add pquota fields where gquota is used. Add project quota changes to all the places where group quota field is used: * add separate project quota members into various structures * split project quota and group quotas so that instead of overriding the group quota members incore, the new project quota members are used instead * get rid of usage of the OQUOTA flag incore, in favor of separate group and project quota flags. * add a project dquot argument to various functions. Not using the pquotino field from superblock yet. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-07-11 13:00:40 +08:00
else if (XFS_QM_ISPDQ(dqp))
qa = tp->t_dqinfo->dqs[XFS_QM_TRANS_PRJ];
else
return NULL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
xfs: remove a few macro indirections in the quota code Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com>
2010-04-20 15:01:53 +08:00
for (i = 0; i < XFS_QM_TRANS_MAXDQS; i++) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (qa[i].qt_dquot == NULL ||
xfs: remove a few macro indirections in the quota code Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com>
2010-04-20 15:01:53 +08:00
qa[i].qt_dquot == dqp)
return &qa[i];
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
xfs: remove a few macro indirections in the quota code Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com>
2010-04-20 15:01:53 +08:00
return NULL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
/*
* Make the changes in the transaction structure.
* The moral equivalent to xfs_trans_mod_sb().
* We don't touch any fields in the dquot, so we don't care
* if it's locked or not (most of the time it won't be).
*/
void
xfs_trans_mod_dquot(
xfs: kill the xfs_dqtrx_t typedef There's only a few uses left, so just kill the typedef while we're at it. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-04-18 07:30:24 +08:00
struct xfs_trans *tp,
struct xfs_dquot *dqp,
uint field,
int64_t delta)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
xfs: kill the xfs_dqtrx_t typedef There's only a few uses left, so just kill the typedef while we're at it. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-04-18 07:30:24 +08:00
struct xfs_dqtrx *qtrx;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ASSERT(tp);
xfs: kill xfs_qmops Kill the quota ops function vector and replace it with direct calls or stubs in the CONFIG_XFS_QUOTA=n case. Make sure we check XFS_IS_QUOTA_RUNNING in the right spots. We can remove the number of those checks because the XFS_TRANS_DQ_DIRTY flag can't be set otherwise. This brings us back closer to the way this code worked in IRIX and earlier Linux versions, but we keep a lot of the more useful factoring of common code. Eventually we should also kill xfs_qm_bhv.c, but that's left for a later patch. Reduces the size of the source code by about 250 lines and the size of XFS module by about 1.5 kilobytes with quotas enabled: text data bss dec hex filename 615957 2960 3848 622765 980ad fs/xfs/xfs.o 617231 3152 3848 624231 98667 fs/xfs/xfs.o.old Fallout: - xfs_qm_dqattach is split into xfs_qm_dqattach_locked which expects the inode locked and xfs_qm_dqattach which does the locking around it, thus removing XFS_QMOPT_ILOCKED. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2009-06-08 21:33:32 +08:00
ASSERT(XFS_IS_QUOTA_RUNNING(tp->t_mountp));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
qtrx = NULL;
if (tp->t_dqinfo == NULL)
xfs_trans_alloc_dqinfo(tp);
/*
* Find either the first free slot or the slot that belongs
* to this dquot.
*/
qtrx = xfs_trans_get_dqtrx(tp, dqp);
ASSERT(qtrx);
if (qtrx->qt_dquot == NULL)
qtrx->qt_dquot = dqp;
switch (field) {
/*
* regular disk blk reservation
*/
case XFS_TRANS_DQ_RES_BLKS:
xfs: widen quota block counters to 64-bit integers Widen the incore quota transaction delta structure to treat block counters as 64-bit integers. This is a necessary addition so that we can widen the i_delayed_blks counter to be a 64-bit integer. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Allison Collins <allison.henderson@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-04-18 07:30:24 +08:00
qtrx->qt_blk_res += delta;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
/*
* inode reservation
*/
case XFS_TRANS_DQ_RES_INOS:
xfs: widen quota block counters to 64-bit integers Widen the incore quota transaction delta structure to treat block counters as 64-bit integers. This is a necessary addition so that we can widen the i_delayed_blks counter to be a 64-bit integer. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Allison Collins <allison.henderson@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-04-18 07:30:24 +08:00
qtrx->qt_ino_res += delta;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
/*
* disk blocks used.
*/
case XFS_TRANS_DQ_BCOUNT:
qtrx->qt_bcount_delta += delta;
break;
case XFS_TRANS_DQ_DELBCOUNT:
qtrx->qt_delbcnt_delta += delta;
break;
/*
* Inode Count
*/
case XFS_TRANS_DQ_ICOUNT:
if (qtrx->qt_ino_res && delta > 0) {
xfs: widen quota block counters to 64-bit integers Widen the incore quota transaction delta structure to treat block counters as 64-bit integers. This is a necessary addition so that we can widen the i_delayed_blks counter to be a 64-bit integer. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Allison Collins <allison.henderson@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-04-18 07:30:24 +08:00
qtrx->qt_ino_res_used += delta;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ASSERT(qtrx->qt_ino_res >= qtrx->qt_ino_res_used);
}
qtrx->qt_icount_delta += delta;
break;
/*
* rtblk reservation
*/
case XFS_TRANS_DQ_RES_RTBLKS:
xfs: widen quota block counters to 64-bit integers Widen the incore quota transaction delta structure to treat block counters as 64-bit integers. This is a necessary addition so that we can widen the i_delayed_blks counter to be a 64-bit integer. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Allison Collins <allison.henderson@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-04-18 07:30:24 +08:00
qtrx->qt_rtblk_res += delta;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
/*
* rtblk count
*/
case XFS_TRANS_DQ_RTBCOUNT:
if (qtrx->qt_rtblk_res && delta > 0) {
xfs: widen quota block counters to 64-bit integers Widen the incore quota transaction delta structure to treat block counters as 64-bit integers. This is a necessary addition so that we can widen the i_delayed_blks counter to be a 64-bit integer. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Allison Collins <allison.henderson@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-04-18 07:30:24 +08:00
qtrx->qt_rtblk_res_used += delta;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ASSERT(qtrx->qt_rtblk_res >= qtrx->qt_rtblk_res_used);
}
qtrx->qt_rtbcount_delta += delta;
break;
case XFS_TRANS_DQ_DELRTBCOUNT:
qtrx->qt_delrtb_delta += delta;
break;
default:
ASSERT(0);
}
tp->t_flags |= XFS_TRANS_DQ_DIRTY;
}
/*
xfs: dquot log reservations are too small During review of the separate project quota inode patches, it became obvious that the dquot log reservation calculation underestimated the number dquots that can be modified in a transaction. This has it's roots way back in the Irix quota implementation. That is, when quotas were first implemented in XFS, it only supported user and project quotas as Irix did not have group quotas. Hence the worst case operation involving dquot modification was calculated to involve 2 user dquots and 1 project dquot or 1 user dequot and 2 project dquots. i.e. 3 dquots. This was determined back in 1996, and has remained unchanged ever since. However, back in 2001, the Linux XFS port dropped all support for project quota and implmented group quotas over the top. This was effectively done with a search-and-replace of project with group, and as such the log reservation was not changed. However, with the advent of group quotas, chmod and rename now could modify more than 3 dquots in a single transaction - both could modify 4 dquots. Hence this log reservation has been wrong for a long time. In 2005, project quota support was reintroduced into Linux, but it was implemented to be mutually exclusive to group quotas and so this didn't add any new changes to the dquot log reservation. Hence when project quotas were in use (rather than group quotas) the log reservation was again valid, just like in the Irix days. Now, with the addition of the separate project quota inode, group and project quotas are no longer mutually exclusive, and hence operations can now modify three dquots per inode where previously it was only two. The worst case here is the rename transaction, which can allocate/free space on two different directory inodes, and if they have different uid/gid/prid configurations and are world writeable, then rename can actually modify 6 different dquots now. Further, the dquot log reservation doesn't take into account the space used by the dquot log format structure that precedes the dquot that is logged, and hence further underestimates the worst case log space required by dquots during a transaction. This has been missing since the first commit in 1996. Hence the worst case log reservation needs to be increased from 3 to 6, and it needs to take into account a log format header for each of those dquots. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-07-10 05:04:01 +08:00
* Given an array of dqtrx structures, lock all the dquots associated and join
* them to the transaction, provided they have been modified. We know that the
xfs: fix the comment explaining xfs_trans_dqlockedjoin Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-11-06 19:45:36 +08:00
* highest number of dquots of one type - usr, grp and prj - involved in a
* transaction is 3 so we don't need to make this very generic.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
STATIC void
xfs_trans_dqlockedjoin(
xfs: kill the xfs_dqtrx_t typedef There's only a few uses left, so just kill the typedef while we're at it. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-04-18 07:30:24 +08:00
struct xfs_trans *tp,
struct xfs_dqtrx *q)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
ASSERT(q[0].qt_dquot != NULL);
if (q[1].qt_dquot == NULL) {
xfs_dqlock(q[0].qt_dquot);
xfs_trans_dqjoin(tp, q[0].qt_dquot);
} else {
ASSERT(XFS_QM_TRANS_MAXDQS == 2);
xfs_dqlock2(q[0].qt_dquot, q[1].qt_dquot);
xfs_trans_dqjoin(tp, q[0].qt_dquot);
xfs_trans_dqjoin(tp, q[1].qt_dquot);
}
}
/*
* Called by xfs_trans_commit() and similar in spirit to
* xfs_trans_apply_sb_deltas().
* Go thru all the dquots belonging to this transaction and modify the
* INCORE dquot to reflect the actual usages.
* Unreserve just the reservations done by this transaction.
* dquot is still left locked at exit.
*/
xfs: kill xfs_qmops Kill the quota ops function vector and replace it with direct calls or stubs in the CONFIG_XFS_QUOTA=n case. Make sure we check XFS_IS_QUOTA_RUNNING in the right spots. We can remove the number of those checks because the XFS_TRANS_DQ_DIRTY flag can't be set otherwise. This brings us back closer to the way this code worked in IRIX and earlier Linux versions, but we keep a lot of the more useful factoring of common code. Eventually we should also kill xfs_qm_bhv.c, but that's left for a later patch. Reduces the size of the source code by about 250 lines and the size of XFS module by about 1.5 kilobytes with quotas enabled: text data bss dec hex filename 615957 2960 3848 622765 980ad fs/xfs/xfs.o 617231 3152 3848 624231 98667 fs/xfs/xfs.o.old Fallout: - xfs_qm_dqattach is split into xfs_qm_dqattach_locked which expects the inode locked and xfs_qm_dqattach which does the locking around it, thus removing XFS_QMOPT_ILOCKED. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2009-06-08 21:33:32 +08:00
void
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
xfs_trans_apply_dquot_deltas(
xfs: pass xfs_dquot to xfs_qm_adjust_dqlimits() instead of xfs_disk_dquot_t Modify xfs_qm_adjust_dqlimits() to take the xfs_dquot as a parameter instead of just the xfs_disk_dquot_t so we can update in-memory fields if necessary. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-03-18 22:51:45 +08:00
struct xfs_trans *tp)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
int i, j;
xfs: pass xfs_dquot to xfs_qm_adjust_dqlimits() instead of xfs_disk_dquot_t Modify xfs_qm_adjust_dqlimits() to take the xfs_dquot as a parameter instead of just the xfs_disk_dquot_t so we can update in-memory fields if necessary. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-03-18 22:51:45 +08:00
struct xfs_dquot *dqp;
struct xfs_dqtrx *qtrx, *qa;
struct xfs_disk_dquot *d;
xfs: widen quota block counters to 64-bit integers Widen the incore quota transaction delta structure to treat block counters as 64-bit integers. This is a necessary addition so that we can widen the i_delayed_blks counter to be a 64-bit integer. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Allison Collins <allison.henderson@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-04-18 07:30:24 +08:00
int64_t totalbdelta;
int64_t totalrtbdelta;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
xfs: kill xfs_qmops Kill the quota ops function vector and replace it with direct calls or stubs in the CONFIG_XFS_QUOTA=n case. Make sure we check XFS_IS_QUOTA_RUNNING in the right spots. We can remove the number of those checks because the XFS_TRANS_DQ_DIRTY flag can't be set otherwise. This brings us back closer to the way this code worked in IRIX and earlier Linux versions, but we keep a lot of the more useful factoring of common code. Eventually we should also kill xfs_qm_bhv.c, but that's left for a later patch. Reduces the size of the source code by about 250 lines and the size of XFS module by about 1.5 kilobytes with quotas enabled: text data bss dec hex filename 615957 2960 3848 622765 980ad fs/xfs/xfs.o 617231 3152 3848 624231 98667 fs/xfs/xfs.o.old Fallout: - xfs_qm_dqattach is split into xfs_qm_dqattach_locked which expects the inode locked and xfs_qm_dqattach which does the locking around it, thus removing XFS_QMOPT_ILOCKED. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2009-06-08 21:33:32 +08:00
if (!(tp->t_flags & XFS_TRANS_DQ_DIRTY))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return;
ASSERT(tp->t_dqinfo);
xfs: Change xfs_dquot_acct to be a 2-dimensional array In preparation for combined pquota/gquota support, for the sake of readability, change xfs_dquot_acct to be a 2-dimensional array. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-06-28 06:25:09 +08:00
for (j = 0; j < XFS_QM_TRANS_DQTYPES; j++) {
qa = tp->t_dqinfo->dqs[j];
if (qa[0].qt_dquot == NULL)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
continue;
/*
* Lock all of the dquots and join them to the transaction.
*/
xfs_trans_dqlockedjoin(tp, qa);
for (i = 0; i < XFS_QM_TRANS_MAXDQS; i++) {
qtrx = &qa[i];
/*
* The array of dquots is filled
* sequentially, not sparsely.
*/
if ((dqp = qtrx->qt_dquot) == NULL)
break;
ASSERT(XFS_DQ_IS_LOCKED(dqp));
/*
* adjust the actual number of blocks used
*/
d = &dqp->q_core;
/*
* The issue here is - sometimes we don't make a blkquota
* reservation intentionally to be fair to users
* (when the amount is small). On the other hand,
* delayed allocs do make reservations, but that's
* outside of a transaction, so we have no
* idea how much was really reserved.
* So, here we've accumulated delayed allocation blks and
* non-delay blks. The assumption is that the
* delayed ones are always reserved (outside of a
* transaction), and the others may or may not have
* quota reservations.
*/
totalbdelta = qtrx->qt_bcount_delta +
qtrx->qt_delbcnt_delta;
totalrtbdelta = qtrx->qt_rtbcount_delta +
qtrx->qt_delrtb_delta;
xfs: remove the dead QUOTADEBUG code Remove the dead hash table test rid which has been rotting away under QUOTADEBUG, including some code that was compiled for normal debug builds, but not actually called without QUOTADEBUG, and enable a few cheap debug checks that were hidden under QUOTADEBUG for normal debug builds. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Elder <aelder@sgi.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2011-07-13 19:43:50 +08:00
#ifdef DEBUG
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (totalbdelta < 0)
[XFS] endianess annotations and cleanup for the quota code SGI-PV: 943272 SGI-Modid: xfs-linux:xfs-kern:199767a Signed-off-by: Christoph Hellwig <hch@sgi.com> Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-11-02 12:01:12 +08:00
ASSERT(be64_to_cpu(d->d_bcount) >=
xfs: remove the dead QUOTADEBUG code Remove the dead hash table test rid which has been rotting away under QUOTADEBUG, including some code that was compiled for normal debug builds, but not actually called without QUOTADEBUG, and enable a few cheap debug checks that were hidden under QUOTADEBUG for normal debug builds. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Elder <aelder@sgi.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2011-07-13 19:43:50 +08:00
-totalbdelta);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (totalrtbdelta < 0)
[XFS] endianess annotations and cleanup for the quota code SGI-PV: 943272 SGI-Modid: xfs-linux:xfs-kern:199767a Signed-off-by: Christoph Hellwig <hch@sgi.com> Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-11-02 12:01:12 +08:00
ASSERT(be64_to_cpu(d->d_rtbcount) >=
xfs: remove the dead QUOTADEBUG code Remove the dead hash table test rid which has been rotting away under QUOTADEBUG, including some code that was compiled for normal debug builds, but not actually called without QUOTADEBUG, and enable a few cheap debug checks that were hidden under QUOTADEBUG for normal debug builds. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Elder <aelder@sgi.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2011-07-13 19:43:50 +08:00
-totalrtbdelta);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (qtrx->qt_icount_delta < 0)
[XFS] endianess annotations and cleanup for the quota code SGI-PV: 943272 SGI-Modid: xfs-linux:xfs-kern:199767a Signed-off-by: Christoph Hellwig <hch@sgi.com> Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-11-02 12:01:12 +08:00
ASSERT(be64_to_cpu(d->d_icount) >=
xfs: remove the dead QUOTADEBUG code Remove the dead hash table test rid which has been rotting away under QUOTADEBUG, including some code that was compiled for normal debug builds, but not actually called without QUOTADEBUG, and enable a few cheap debug checks that were hidden under QUOTADEBUG for normal debug builds. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Elder <aelder@sgi.com> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2011-07-13 19:43:50 +08:00
-qtrx->qt_icount_delta);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#endif
if (totalbdelta)
xfs: convert beX_add to beX_add_cpu (new common API) remove beX_add functions and replace all uses with beX_add_cpu Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Reviewed-by: Dave Chinner <dgc@sgi.com> Cc: Timothy Shimmin <tes@sgi.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-14 07:03:29 +08:00
be64_add_cpu(&d->d_bcount, (xfs_qcnt_t)totalbdelta);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (qtrx->qt_icount_delta)
xfs: convert beX_add to beX_add_cpu (new common API) remove beX_add functions and replace all uses with beX_add_cpu Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Reviewed-by: Dave Chinner <dgc@sgi.com> Cc: Timothy Shimmin <tes@sgi.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-14 07:03:29 +08:00
be64_add_cpu(&d->d_icount, (xfs_qcnt_t)qtrx->qt_icount_delta);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (totalrtbdelta)
xfs: convert beX_add to beX_add_cpu (new common API) remove beX_add functions and replace all uses with beX_add_cpu Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Reviewed-by: Dave Chinner <dgc@sgi.com> Cc: Timothy Shimmin <tes@sgi.com> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-14 07:03:29 +08:00
be64_add_cpu(&d->d_rtbcount, (xfs_qcnt_t)totalrtbdelta);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* Get any default limits in use.
* Start/reset the timer(s) if needed.
*/
if (d->d_id) {
xfs: pass xfs_dquot to xfs_qm_adjust_dqlimits() instead of xfs_disk_dquot_t Modify xfs_qm_adjust_dqlimits() to take the xfs_dquot as a parameter instead of just the xfs_disk_dquot_t so we can update in-memory fields if necessary. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-03-18 22:51:45 +08:00
xfs_qm_adjust_dqlimits(tp->t_mountp, dqp);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
xfs_qm_adjust_dqtimers(tp->t_mountp, d);
}
dqp->dq_flags |= XFS_DQ_DIRTY;
/*
* add this to the list of items to get logged
*/
xfs_trans_log_dquot(tp, dqp);
/*
* Take off what's left of the original reservation.
* In case of delayed allocations, there's no
* reservation that a transaction structure knows of.
*/
if (qtrx->qt_blk_res != 0) {
xfs: widen quota block counters to 64-bit integers Widen the incore quota transaction delta structure to treat block counters as 64-bit integers. This is a necessary addition so that we can widen the i_delayed_blks counter to be a 64-bit integer. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Allison Collins <allison.henderson@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-04-18 07:30:24 +08:00
uint64_t blk_res_used = 0;
xfs: fix quota block reservation leak when tp allocates and frees blocks Al Viro reports that generic/231 fails frequently on XFS and bisected the problem to the following commit: 5d11fb4b xfs: rework zero range to prevent invalid i_size updates ... which is just the first commit that happens to cause fsx to reproduce the problem. fsx reproduces via zero range calls. The aforementioned commit overhauls zero range to use hole punch and fallocate. As it turns out, the problem is reproducible on demand using basic hole punch as follows: $ mkfs.xfs -f -m crc=1,finobt=1 <dev> $ mount <dev> /mnt -o uquota $ xfs_io -f -c "falloc 0 50m" /mnt/file $ for i in $(seq 1 20); do xfs_io -c "fpunch ${i}m 32k" /mnt/file; done $ rm -f /mnt/file $ repquota -us /mnt ... User used soft hard grace used soft hard grace ---------------------------------------------------------------------- root -- 32K 0K 0K 3 0 0 A file is allocated with a single 50m extent. The extent count increases via hole punches until the bmap converts to btree format. The file is removed but quota reports 32k of space usage for the user. This reservation is effectively leaked for the lifetime of the mount. The reason this occurs is because the quota block reservation tracking is confused when a transaction happens to free and allocate blocks at the same time. Consider the following sequence of events: - tp is allocated from xfs_free_file_space() and reserves several blocks for btree management. Blocks are reserved against the dquot and marked as such in the transaction (qtrx->qt_blk_res). - 8 blocks are accounted free when the 32k range is punched out. xfs_trans_mod_dquot() is called with XFS_TRANS_DQ_BCOUNT and sets ->qt_bcount_delta to -8. - Subsequently, a block is allocated against the same transaction by xfs_bmap_extents_to_btree() for btree conversion. A call to xfs_trans_mod_dquot() increases qt_blk_res_used to 1 and qt_bcount_delta to -7. - The transaction is dup'd and committed by xfs_bmap_finish(). xfs_trans_dup_dqinfo() sets the first transaction up such that it has a matching qt_blk_res and qt_blk_res_used of 1. The remaining unused reservation is transferred to the duplicate tp. When the transactions are committed, the dquots are fixed up in xfs_trans_apply_dquot_deltas() according to one of two methods: 1.) If the transaction holds a block reservation (->qt_blk_res != 0), _only_ the unused portion reservation is unaccounted from the dquot. Note that the tp duplication behavior of xfs_bmap_finish() makes it such that qt_blk_res is typically 0 for tp's with unused reservation. 2.) Otherwise, the dquot is fixed up based on the block delta (->qt_bcount_delta) created by the transaction. Therefore, if a transaction has a negative qt_bcount_delta and positive qt_blk_res_used, the former set of blocks that have been removed from the file are never factored out of the in-core dquot reservation. Instead, *_apply_dquot_deltas() sees 1 block used out of a 1 block reservation and believes there is nothing to fix up. The on-disk d_bcount is updated independently from qt_bcount_delta, and thus is correct (and allows the quota usage to correct on remount). To deal with this situation, we effectively want the "used reservation" part of the transaction to be consistent with any freed blocks with respect to quota tracking. For example, if 8 blocks are freed, the subsequent single block allocation does not need to consume the initial reservation made by the tp. Instead, it simply borrows one from the previously freed. One possible implementation of such borrowing is to avoid the blks_res_used increment when bcount_delta is negative. This alone is flawed logic in that it only handles the case where blocks are freed before allocated, however. Rather than add more complexity to manage synchronization between bcount_delta and blks_res_used, kill the latter entirely. blk_res_used is only updated in one place and always in sync with delta_bcount. Therefore, the net block reservation consumption of the transaction is always available from bcount_delta. Calculate the reservation consumption on the fly where necessary based on whether the tp has a reservation and results in a positive net block delta on the inode. Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-06-01 05:15:37 +08:00
if (qtrx->qt_bcount_delta > 0)
blk_res_used = qtrx->qt_bcount_delta;
if (qtrx->qt_blk_res != blk_res_used) {
if (qtrx->qt_blk_res > blk_res_used)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
dqp->q_res_bcount -= (xfs_qcnt_t)
(qtrx->qt_blk_res -
xfs: fix quota block reservation leak when tp allocates and frees blocks Al Viro reports that generic/231 fails frequently on XFS and bisected the problem to the following commit: 5d11fb4b xfs: rework zero range to prevent invalid i_size updates ... which is just the first commit that happens to cause fsx to reproduce the problem. fsx reproduces via zero range calls. The aforementioned commit overhauls zero range to use hole punch and fallocate. As it turns out, the problem is reproducible on demand using basic hole punch as follows: $ mkfs.xfs -f -m crc=1,finobt=1 <dev> $ mount <dev> /mnt -o uquota $ xfs_io -f -c "falloc 0 50m" /mnt/file $ for i in $(seq 1 20); do xfs_io -c "fpunch ${i}m 32k" /mnt/file; done $ rm -f /mnt/file $ repquota -us /mnt ... User used soft hard grace used soft hard grace ---------------------------------------------------------------------- root -- 32K 0K 0K 3 0 0 A file is allocated with a single 50m extent. The extent count increases via hole punches until the bmap converts to btree format. The file is removed but quota reports 32k of space usage for the user. This reservation is effectively leaked for the lifetime of the mount. The reason this occurs is because the quota block reservation tracking is confused when a transaction happens to free and allocate blocks at the same time. Consider the following sequence of events: - tp is allocated from xfs_free_file_space() and reserves several blocks for btree management. Blocks are reserved against the dquot and marked as such in the transaction (qtrx->qt_blk_res). - 8 blocks are accounted free when the 32k range is punched out. xfs_trans_mod_dquot() is called with XFS_TRANS_DQ_BCOUNT and sets ->qt_bcount_delta to -8. - Subsequently, a block is allocated against the same transaction by xfs_bmap_extents_to_btree() for btree conversion. A call to xfs_trans_mod_dquot() increases qt_blk_res_used to 1 and qt_bcount_delta to -7. - The transaction is dup'd and committed by xfs_bmap_finish(). xfs_trans_dup_dqinfo() sets the first transaction up such that it has a matching qt_blk_res and qt_blk_res_used of 1. The remaining unused reservation is transferred to the duplicate tp. When the transactions are committed, the dquots are fixed up in xfs_trans_apply_dquot_deltas() according to one of two methods: 1.) If the transaction holds a block reservation (->qt_blk_res != 0), _only_ the unused portion reservation is unaccounted from the dquot. Note that the tp duplication behavior of xfs_bmap_finish() makes it such that qt_blk_res is typically 0 for tp's with unused reservation. 2.) Otherwise, the dquot is fixed up based on the block delta (->qt_bcount_delta) created by the transaction. Therefore, if a transaction has a negative qt_bcount_delta and positive qt_blk_res_used, the former set of blocks that have been removed from the file are never factored out of the in-core dquot reservation. Instead, *_apply_dquot_deltas() sees 1 block used out of a 1 block reservation and believes there is nothing to fix up. The on-disk d_bcount is updated independently from qt_bcount_delta, and thus is correct (and allows the quota usage to correct on remount). To deal with this situation, we effectively want the "used reservation" part of the transaction to be consistent with any freed blocks with respect to quota tracking. For example, if 8 blocks are freed, the subsequent single block allocation does not need to consume the initial reservation made by the tp. Instead, it simply borrows one from the previously freed. One possible implementation of such borrowing is to avoid the blks_res_used increment when bcount_delta is negative. This alone is flawed logic in that it only handles the case where blocks are freed before allocated, however. Rather than add more complexity to manage synchronization between bcount_delta and blks_res_used, kill the latter entirely. blk_res_used is only updated in one place and always in sync with delta_bcount. Therefore, the net block reservation consumption of the transaction is always available from bcount_delta. Calculate the reservation consumption on the fly where necessary based on whether the tp has a reservation and results in a positive net block delta on the inode. Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-06-01 05:15:37 +08:00
blk_res_used);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
else
dqp->q_res_bcount -= (xfs_qcnt_t)
xfs: fix quota block reservation leak when tp allocates and frees blocks Al Viro reports that generic/231 fails frequently on XFS and bisected the problem to the following commit: 5d11fb4b xfs: rework zero range to prevent invalid i_size updates ... which is just the first commit that happens to cause fsx to reproduce the problem. fsx reproduces via zero range calls. The aforementioned commit overhauls zero range to use hole punch and fallocate. As it turns out, the problem is reproducible on demand using basic hole punch as follows: $ mkfs.xfs -f -m crc=1,finobt=1 <dev> $ mount <dev> /mnt -o uquota $ xfs_io -f -c "falloc 0 50m" /mnt/file $ for i in $(seq 1 20); do xfs_io -c "fpunch ${i}m 32k" /mnt/file; done $ rm -f /mnt/file $ repquota -us /mnt ... User used soft hard grace used soft hard grace ---------------------------------------------------------------------- root -- 32K 0K 0K 3 0 0 A file is allocated with a single 50m extent. The extent count increases via hole punches until the bmap converts to btree format. The file is removed but quota reports 32k of space usage for the user. This reservation is effectively leaked for the lifetime of the mount. The reason this occurs is because the quota block reservation tracking is confused when a transaction happens to free and allocate blocks at the same time. Consider the following sequence of events: - tp is allocated from xfs_free_file_space() and reserves several blocks for btree management. Blocks are reserved against the dquot and marked as such in the transaction (qtrx->qt_blk_res). - 8 blocks are accounted free when the 32k range is punched out. xfs_trans_mod_dquot() is called with XFS_TRANS_DQ_BCOUNT and sets ->qt_bcount_delta to -8. - Subsequently, a block is allocated against the same transaction by xfs_bmap_extents_to_btree() for btree conversion. A call to xfs_trans_mod_dquot() increases qt_blk_res_used to 1 and qt_bcount_delta to -7. - The transaction is dup'd and committed by xfs_bmap_finish(). xfs_trans_dup_dqinfo() sets the first transaction up such that it has a matching qt_blk_res and qt_blk_res_used of 1. The remaining unused reservation is transferred to the duplicate tp. When the transactions are committed, the dquots are fixed up in xfs_trans_apply_dquot_deltas() according to one of two methods: 1.) If the transaction holds a block reservation (->qt_blk_res != 0), _only_ the unused portion reservation is unaccounted from the dquot. Note that the tp duplication behavior of xfs_bmap_finish() makes it such that qt_blk_res is typically 0 for tp's with unused reservation. 2.) Otherwise, the dquot is fixed up based on the block delta (->qt_bcount_delta) created by the transaction. Therefore, if a transaction has a negative qt_bcount_delta and positive qt_blk_res_used, the former set of blocks that have been removed from the file are never factored out of the in-core dquot reservation. Instead, *_apply_dquot_deltas() sees 1 block used out of a 1 block reservation and believes there is nothing to fix up. The on-disk d_bcount is updated independently from qt_bcount_delta, and thus is correct (and allows the quota usage to correct on remount). To deal with this situation, we effectively want the "used reservation" part of the transaction to be consistent with any freed blocks with respect to quota tracking. For example, if 8 blocks are freed, the subsequent single block allocation does not need to consume the initial reservation made by the tp. Instead, it simply borrows one from the previously freed. One possible implementation of such borrowing is to avoid the blks_res_used increment when bcount_delta is negative. This alone is flawed logic in that it only handles the case where blocks are freed before allocated, however. Rather than add more complexity to manage synchronization between bcount_delta and blks_res_used, kill the latter entirely. blk_res_used is only updated in one place and always in sync with delta_bcount. Therefore, the net block reservation consumption of the transaction is always available from bcount_delta. Calculate the reservation consumption on the fly where necessary based on whether the tp has a reservation and results in a positive net block delta on the inode. Reported-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-06-01 05:15:37 +08:00
(blk_res_used -
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
qtrx->qt_blk_res);
}
} else {
/*
* These blks were never reserved, either inside
* a transaction or outside one (in a delayed
* allocation). Also, this isn't always a
* negative number since we sometimes
* deliberately skip quota reservations.
*/
if (qtrx->qt_bcount_delta) {
dqp->q_res_bcount +=
(xfs_qcnt_t)qtrx->qt_bcount_delta;
}
}
/*
* Adjust the RT reservation.
*/
if (qtrx->qt_rtblk_res != 0) {
[XFS] Merge fixes into realtime quota code, since one/two reported, still not enabled though. SGI-PV: 938145 SGI-Modid: xfs-linux:xfs-kern:22900a Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-06-21 13:48:47 +08:00
if (qtrx->qt_rtblk_res != qtrx->qt_rtblk_res_used) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (qtrx->qt_rtblk_res >
qtrx->qt_rtblk_res_used)
dqp->q_res_rtbcount -= (xfs_qcnt_t)
(qtrx->qt_rtblk_res -
qtrx->qt_rtblk_res_used);
else
dqp->q_res_rtbcount -= (xfs_qcnt_t)
(qtrx->qt_rtblk_res_used -
qtrx->qt_rtblk_res);
}
} else {
if (qtrx->qt_rtbcount_delta)
dqp->q_res_rtbcount +=
(xfs_qcnt_t)qtrx->qt_rtbcount_delta;
}
/*
* Adjust the inode reservation.
*/
if (qtrx->qt_ino_res != 0) {
ASSERT(qtrx->qt_ino_res >=
qtrx->qt_ino_res_used);
if (qtrx->qt_ino_res > qtrx->qt_ino_res_used)
dqp->q_res_icount -= (xfs_qcnt_t)
(qtrx->qt_ino_res -
qtrx->qt_ino_res_used);
} else {
if (qtrx->qt_icount_delta)
dqp->q_res_icount +=
(xfs_qcnt_t)qtrx->qt_icount_delta;
}
ASSERT(dqp->q_res_bcount >=
[XFS] endianess annotations and cleanup for the quota code SGI-PV: 943272 SGI-Modid: xfs-linux:xfs-kern:199767a Signed-off-by: Christoph Hellwig <hch@sgi.com> Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-11-02 12:01:12 +08:00
be64_to_cpu(dqp->q_core.d_bcount));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ASSERT(dqp->q_res_icount >=
[XFS] endianess annotations and cleanup for the quota code SGI-PV: 943272 SGI-Modid: xfs-linux:xfs-kern:199767a Signed-off-by: Christoph Hellwig <hch@sgi.com> Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-11-02 12:01:12 +08:00
be64_to_cpu(dqp->q_core.d_icount));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ASSERT(dqp->q_res_rtbcount >=
[XFS] endianess annotations and cleanup for the quota code SGI-PV: 943272 SGI-Modid: xfs-linux:xfs-kern:199767a Signed-off-by: Christoph Hellwig <hch@sgi.com> Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-11-02 12:01:12 +08:00
be64_to_cpu(dqp->q_core.d_rtbcount));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
}
}
/*
* Release the reservations, and adjust the dquots accordingly.
* This is called only when the transaction is being aborted. If by
* any chance we have done dquot modifications incore (ie. deltas) already,
* we simply throw those away, since that's the expected behavior
* when a transaction is curtailed without a commit.
*/
xfs: kill xfs_qmops Kill the quota ops function vector and replace it with direct calls or stubs in the CONFIG_XFS_QUOTA=n case. Make sure we check XFS_IS_QUOTA_RUNNING in the right spots. We can remove the number of those checks because the XFS_TRANS_DQ_DIRTY flag can't be set otherwise. This brings us back closer to the way this code worked in IRIX and earlier Linux versions, but we keep a lot of the more useful factoring of common code. Eventually we should also kill xfs_qm_bhv.c, but that's left for a later patch. Reduces the size of the source code by about 250 lines and the size of XFS module by about 1.5 kilobytes with quotas enabled: text data bss dec hex filename 615957 2960 3848 622765 980ad fs/xfs/xfs.o 617231 3152 3848 624231 98667 fs/xfs/xfs.o.old Fallout: - xfs_qm_dqattach is split into xfs_qm_dqattach_locked which expects the inode locked and xfs_qm_dqattach which does the locking around it, thus removing XFS_QMOPT_ILOCKED. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2009-06-08 21:33:32 +08:00
void
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
xfs_trans_unreserve_and_mod_dquots(
xfs_trans_t *tp)
{
int i, j;
xfs_dquot_t *dqp;
xfs: kill the xfs_dqtrx_t typedef There's only a few uses left, so just kill the typedef while we're at it. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-04-18 07:30:24 +08:00
struct xfs_dqtrx *qtrx, *qa;
xfs: Remove boolean_t typedef completely. Since we are using C99 we have one builtin defined in include/linux/types.h, use that instead. v2: you missed one in fs/xfs/xfs_qm_bhv.c, cleaned up. -bpm Signed-off-by: Thiago Farina <tfarina@chromium.org> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-13 07:32:59 +08:00
bool locked;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (!tp->t_dqinfo || !(tp->t_flags & XFS_TRANS_DQ_DIRTY))
return;
xfs: Change xfs_dquot_acct to be a 2-dimensional array In preparation for combined pquota/gquota support, for the sake of readability, change xfs_dquot_acct to be a 2-dimensional array. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-06-28 06:25:09 +08:00
for (j = 0; j < XFS_QM_TRANS_DQTYPES; j++) {
qa = tp->t_dqinfo->dqs[j];
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
for (i = 0; i < XFS_QM_TRANS_MAXDQS; i++) {
qtrx = &qa[i];
/*
* We assume that the array of dquots is filled
* sequentially, not sparsely.
*/
if ((dqp = qtrx->qt_dquot) == NULL)
break;
/*
* Unreserve the original reservation. We don't care
* about the number of blocks used field, or deltas.
* Also we don't bother to zero the fields.
*/
xfs: Remove boolean_t typedef completely. Since we are using C99 we have one builtin defined in include/linux/types.h, use that instead. v2: you missed one in fs/xfs/xfs_qm_bhv.c, cleaned up. -bpm Signed-off-by: Thiago Farina <tfarina@chromium.org> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-13 07:32:59 +08:00
locked = false;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (qtrx->qt_blk_res) {
xfs_dqlock(dqp);
xfs: Remove boolean_t typedef completely. Since we are using C99 we have one builtin defined in include/linux/types.h, use that instead. v2: you missed one in fs/xfs/xfs_qm_bhv.c, cleaned up. -bpm Signed-off-by: Thiago Farina <tfarina@chromium.org> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-13 07:32:59 +08:00
locked = true;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
dqp->q_res_bcount -=
(xfs_qcnt_t)qtrx->qt_blk_res;
}
if (qtrx->qt_ino_res) {
if (!locked) {
xfs_dqlock(dqp);
xfs: Remove boolean_t typedef completely. Since we are using C99 we have one builtin defined in include/linux/types.h, use that instead. v2: you missed one in fs/xfs/xfs_qm_bhv.c, cleaned up. -bpm Signed-off-by: Thiago Farina <tfarina@chromium.org> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-13 07:32:59 +08:00
locked = true;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
dqp->q_res_icount -=
(xfs_qcnt_t)qtrx->qt_ino_res;
}
if (qtrx->qt_rtblk_res) {
if (!locked) {
xfs_dqlock(dqp);
xfs: Remove boolean_t typedef completely. Since we are using C99 we have one builtin defined in include/linux/types.h, use that instead. v2: you missed one in fs/xfs/xfs_qm_bhv.c, cleaned up. -bpm Signed-off-by: Thiago Farina <tfarina@chromium.org> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-11-13 07:32:59 +08:00
locked = true;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
dqp->q_res_rtbcount -=
(xfs_qcnt_t)qtrx->qt_rtblk_res;
}
if (locked)
xfs_dqunlock(dqp);
}
}
}
xfs: implement quota warnings via netlink Wire up quota_send_warning to send quota warnings over netlink. This is used by various desktops to show user quota warnings. Tested by running the quota_nld daemon while running the xfstest quota tests and observing the warnings. I'll see how I can get a more formal testcase for it written. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-01-18 06:36:19 +08:00
STATIC void
xfs_quota_warn(
struct xfs_mount *mp,
struct xfs_dquot *dqp,
int type)
{
xfs: send warning of project quota to userspace via netlink Linux's quota subsystem has an ability to handle project quota. This commit just utilizes the ability from xfs side. dbus-monitor and quota_nld shipped as part of quota-tools can be used for testing. See the patch posting on the XFS list for details on testing. Signed-off-by: Masatake YAMATO <yamato@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-01-04 13:10:42 +08:00
enum quota_type qtype;
xfs: implement quota warnings via netlink Wire up quota_send_warning to send quota warnings over netlink. This is used by various desktops to show user quota warnings. Tested by running the quota_nld daemon while running the xfstest quota tests and observing the warnings. I'll see how I can get a more formal testcase for it written. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-01-18 06:36:19 +08:00
if (dqp->dq_flags & XFS_DQ_PROJ)
xfs: send warning of project quota to userspace via netlink Linux's quota subsystem has an ability to handle project quota. This commit just utilizes the ability from xfs side. dbus-monitor and quota_nld shipped as part of quota-tools can be used for testing. See the patch posting on the XFS list for details on testing. Signed-off-by: Masatake YAMATO <yamato@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-01-04 13:10:42 +08:00
qtype = PRJQUOTA;
else if (dqp->dq_flags & XFS_DQ_USER)
qtype = USRQUOTA;
else
qtype = GRPQUOTA;
quota_send_warning(make_kqid(&init_user_ns, qtype,
userns: Convert quota netlink aka quota_send_warning Modify quota_send_warning to take struct kqid instead a type and identifier pair. When sending netlink broadcasts always convert uids and quota identifiers into the intial user namespace. There is as yet no way to send a netlink broadcast message with different contents to receivers in different namespaces, so for the time being just map all of the identifiers into the initial user namespace which preserves the current behavior. Change the callers of quota_send_warning in gfs2, xfs and dquot to generate a struct kqid to pass to quota send warning. When all of the user namespaces convesions are complete a struct kqid values will be availbe without need for conversion, but a conversion is needed now to avoid needing to convert everything at once. Cc: Ben Myers <bpm@sgi.com> Cc: Alex Elder <elder@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-09-16 17:32:43 +08:00
be32_to_cpu(dqp->q_core.d_id)),
mp->m_super->s_dev, type);
xfs: implement quota warnings via netlink Wire up quota_send_warning to send quota warnings over netlink. This is used by various desktops to show user quota warnings. Tested by running the quota_nld daemon while running the xfstest quota tests and observing the warnings. I'll see how I can get a more formal testcase for it written. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-01-18 06:36:19 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* This reserves disk blocks and inodes against a dquot.
* Flags indicate if the dquot is to be locked here and also
* if the blk reservation is for RT or regular blocks.
* Sending in XFS_QMOPT_FORCE_RES flag skips the quota check.
*/
STATIC int
xfs_trans_dqresv(
xfs_trans_t *tp,
xfs_mount_t *mp,
xfs_dquot_t *dqp,
xfs: widen quota block counters to 64-bit integers Widen the incore quota transaction delta structure to treat block counters as 64-bit integers. This is a necessary addition so that we can widen the i_delayed_blks counter to be a 64-bit integer. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Allison Collins <allison.henderson@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-04-18 07:30:24 +08:00
int64_t nblks,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
long ninos,
uint flags)
{
xfs_qcnt_t hardlimit;
xfs_qcnt_t softlimit;
[XFS] Merge fixes into realtime quota code, since one/two reported, still not enabled though. SGI-PV: 938145 SGI-Modid: xfs-linux:xfs-kern:22900a Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-06-21 13:48:47 +08:00
time_t timer;
xfs_qwarncnt_t warns;
xfs_qwarncnt_t warnlimit;
xfs: cleanup quota check on disk blocks and inodes reservations This patch is a cleanup of quota check on disk blocks and inodes reservations, and changes it as follows. (1) add a total_count variable to store the total number of current usages and new reservations for disk blocks and inodes, respectively. (2) make it more readable to check if the local variables softlimit and hardlimit are positive. It has been changed as follows. if (softlimit > 0ULL) -> if (softlimit) if (hardlimit > 0ULL) -> if (hardlimit) This is because they are defined as xfs_qcnt_t which is unsigned. Signed-off-by: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com> Cc: Ben Myers <bpm@sgi.com> Cc: Alex Elder <elder@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-02-06 20:51:05 +08:00
xfs_qcnt_t total_count;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
xfs_qcnt_t *resbcountp;
xfs_quotainfo_t *q = mp->m_quotainfo;
xfs: Split default quota limits by quota type Default quotas are globally set due historical reasons. IRIX only supported user and project quotas, and default quota was only applied to user quotas. In Linux, when a default quota is set, all different quota types inherits the same default value. An user with a quota limit larger than the default quota value, will still be limited to the default value because the group quotas also inherits the default quotas. Unless the group which the user belongs to have a custom quota limit set. This patch aims to split the default quota value by quota type. Allowing each quota type having different default values. Default time limits are still set globally. XFS does not set a per-user/group timer, but a single global timer. For changing this behavior, some changes should be made in user-space tools another bugs being fixed. Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-02-08 08:27:55 +08:00
struct xfs_def_quota *defq;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
xfs: remove the unused XFS_QMOPT_DQLOCK flag The XFS_QMOPT_DQLOCK flag introduces major complexity in the quota subsystem but isn't actually used anywhere. So remove it and all the hazzles it introduces. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com>
2009-02-09 04:51:42 +08:00
xfs_dqlock(dqp);
xfs: Split default quota limits by quota type Default quotas are globally set due historical reasons. IRIX only supported user and project quotas, and default quota was only applied to user quotas. In Linux, when a default quota is set, all different quota types inherits the same default value. An user with a quota limit larger than the default quota value, will still be limited to the default value because the group quotas also inherits the default quotas. Unless the group which the user belongs to have a custom quota limit set. This patch aims to split the default quota value by quota type. Allowing each quota type having different default values. Default time limits are still set globally. XFS does not set a per-user/group timer, but a single global timer. For changing this behavior, some changes should be made in user-space tools another bugs being fixed. Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-02-08 08:27:55 +08:00
defq = xfs_get_defquota(dqp, q);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (flags & XFS_TRANS_DQ_RES_BLKS) {
[XFS] endianess annotations and cleanup for the quota code SGI-PV: 943272 SGI-Modid: xfs-linux:xfs-kern:199767a Signed-off-by: Christoph Hellwig <hch@sgi.com> Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-11-02 12:01:12 +08:00
hardlimit = be64_to_cpu(dqp->q_core.d_blk_hardlimit);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (!hardlimit)
xfs: Split default quota limits by quota type Default quotas are globally set due historical reasons. IRIX only supported user and project quotas, and default quota was only applied to user quotas. In Linux, when a default quota is set, all different quota types inherits the same default value. An user with a quota limit larger than the default quota value, will still be limited to the default value because the group quotas also inherits the default quotas. Unless the group which the user belongs to have a custom quota limit set. This patch aims to split the default quota value by quota type. Allowing each quota type having different default values. Default time limits are still set globally. XFS does not set a per-user/group timer, but a single global timer. For changing this behavior, some changes should be made in user-space tools another bugs being fixed. Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-02-08 08:27:55 +08:00
hardlimit = defq->bhardlimit;
[XFS] endianess annotations and cleanup for the quota code SGI-PV: 943272 SGI-Modid: xfs-linux:xfs-kern:199767a Signed-off-by: Christoph Hellwig <hch@sgi.com> Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-11-02 12:01:12 +08:00
softlimit = be64_to_cpu(dqp->q_core.d_blk_softlimit);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (!softlimit)
xfs: Split default quota limits by quota type Default quotas are globally set due historical reasons. IRIX only supported user and project quotas, and default quota was only applied to user quotas. In Linux, when a default quota is set, all different quota types inherits the same default value. An user with a quota limit larger than the default quota value, will still be limited to the default value because the group quotas also inherits the default quotas. Unless the group which the user belongs to have a custom quota limit set. This patch aims to split the default quota value by quota type. Allowing each quota type having different default values. Default time limits are still set globally. XFS does not set a per-user/group timer, but a single global timer. For changing this behavior, some changes should be made in user-space tools another bugs being fixed. Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-02-08 08:27:55 +08:00
softlimit = defq->bsoftlimit;
[XFS] endianess annotations and cleanup for the quota code SGI-PV: 943272 SGI-Modid: xfs-linux:xfs-kern:199767a Signed-off-by: Christoph Hellwig <hch@sgi.com> Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-11-02 12:01:12 +08:00
timer = be32_to_cpu(dqp->q_core.d_btimer);
warns = be16_to_cpu(dqp->q_core.d_bwarns);
xfs: access quotainfo structure directly Access fields in m_quotainfo directly instead of hiding them behind the XFS_QI_* macros. Add local variables for the quotainfo pointer in places where we have lots of them. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com>
2010-04-20 15:01:30 +08:00
warnlimit = dqp->q_mount->m_quotainfo->qi_bwarnlimit;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
resbcountp = &dqp->q_res_bcount;
} else {
ASSERT(flags & XFS_TRANS_DQ_RES_RTBLKS);
[XFS] endianess annotations and cleanup for the quota code SGI-PV: 943272 SGI-Modid: xfs-linux:xfs-kern:199767a Signed-off-by: Christoph Hellwig <hch@sgi.com> Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-11-02 12:01:12 +08:00
hardlimit = be64_to_cpu(dqp->q_core.d_rtb_hardlimit);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (!hardlimit)
xfs: Split default quota limits by quota type Default quotas are globally set due historical reasons. IRIX only supported user and project quotas, and default quota was only applied to user quotas. In Linux, when a default quota is set, all different quota types inherits the same default value. An user with a quota limit larger than the default quota value, will still be limited to the default value because the group quotas also inherits the default quotas. Unless the group which the user belongs to have a custom quota limit set. This patch aims to split the default quota value by quota type. Allowing each quota type having different default values. Default time limits are still set globally. XFS does not set a per-user/group timer, but a single global timer. For changing this behavior, some changes should be made in user-space tools another bugs being fixed. Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-02-08 08:27:55 +08:00
hardlimit = defq->rtbhardlimit;
[XFS] endianess annotations and cleanup for the quota code SGI-PV: 943272 SGI-Modid: xfs-linux:xfs-kern:199767a Signed-off-by: Christoph Hellwig <hch@sgi.com> Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-11-02 12:01:12 +08:00
softlimit = be64_to_cpu(dqp->q_core.d_rtb_softlimit);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (!softlimit)
xfs: Split default quota limits by quota type Default quotas are globally set due historical reasons. IRIX only supported user and project quotas, and default quota was only applied to user quotas. In Linux, when a default quota is set, all different quota types inherits the same default value. An user with a quota limit larger than the default quota value, will still be limited to the default value because the group quotas also inherits the default quotas. Unless the group which the user belongs to have a custom quota limit set. This patch aims to split the default quota value by quota type. Allowing each quota type having different default values. Default time limits are still set globally. XFS does not set a per-user/group timer, but a single global timer. For changing this behavior, some changes should be made in user-space tools another bugs being fixed. Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-02-08 08:27:55 +08:00
softlimit = defq->rtbsoftlimit;
[XFS] endianess annotations and cleanup for the quota code SGI-PV: 943272 SGI-Modid: xfs-linux:xfs-kern:199767a Signed-off-by: Christoph Hellwig <hch@sgi.com> Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-11-02 12:01:12 +08:00
timer = be32_to_cpu(dqp->q_core.d_rtbtimer);
warns = be16_to_cpu(dqp->q_core.d_rtbwarns);
xfs: access quotainfo structure directly Access fields in m_quotainfo directly instead of hiding them behind the XFS_QI_* macros. Add local variables for the quotainfo pointer in places where we have lots of them. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com>
2010-04-20 15:01:30 +08:00
warnlimit = dqp->q_mount->m_quotainfo->qi_rtbwarnlimit;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
resbcountp = &dqp->q_res_rtbcount;
}
if ((flags & XFS_QMOPT_FORCE_RES) == 0 &&
dqp->q_core.d_id &&
[XFS] Fix uquota and oquota enforcement problems. When uquota and oquota (gquota/pquota) are enabled for accounting both are enforced if ether has enforcement active. Conditions: - Both XFS_UQUOTA_ACCT and XFS_GQUOTA_ACCT are enabled. - Either XFS_UQUOTA_ENFD or XFS_OQUOTA_ENFD is enabled. - The usage without enforce is reached at the soft limit. Problems: 1. "repquota" shows all grace time even if no enforcement. 2. we cannot make a file over a hard limits even if no enforcement. SGI-PV: 962291 SGI-Modid: xfs-linux-melb:xfs-kern:28272a Signed-off-by: Kouta Ooizumi <k-ooizumi@tnes.nec.co.jp> Signed-off-by: Donald Douwsma <donaldd@sgi.com> Signed-off-by: Tim Shimmin <tes@sgi.com>
2007-05-08 11:49:33 +08:00
((XFS_IS_UQUOTA_ENFORCED(dqp->q_mount) && XFS_QM_ISUDQ(dqp)) ||
xfs: Remove incore use of XFS_OQUOTA_ENFD and XFS_OQUOTA_CHKD Remove all incore use of XFS_OQUOTA_ENFD and XFS_OQUOTA_CHKD. Instead, start using XFS_GQUOTA_.* XFS_PQUOTA_.* counterparts for GQUOTA and PQUOTA respectively. On-disk copy still uses XFS_OQUOTA_ENFD and XFS_OQUOTA_CHKD. Read and write of the superblock does the conversion from *OQUOTA* to *[PG]QUOTA*. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-06-28 06:25:10 +08:00
(XFS_IS_GQUOTA_ENFORCED(dqp->q_mount) && XFS_QM_ISGDQ(dqp)) ||
(XFS_IS_PQUOTA_ENFORCED(dqp->q_mount) && XFS_QM_ISPDQ(dqp)))) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (nblks > 0) {
/*
* dquot is locked already. See if we'd go over the
* hardlimit or exceed the timelimit if we allocate
* nblks.
*/
xfs: cleanup quota check on disk blocks and inodes reservations This patch is a cleanup of quota check on disk blocks and inodes reservations, and changes it as follows. (1) add a total_count variable to store the total number of current usages and new reservations for disk blocks and inodes, respectively. (2) make it more readable to check if the local variables softlimit and hardlimit are positive. It has been changed as follows. if (softlimit > 0ULL) -> if (softlimit) if (hardlimit > 0ULL) -> if (hardlimit) This is because they are defined as xfs_qcnt_t which is unsigned. Signed-off-by: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com> Cc: Ben Myers <bpm@sgi.com> Cc: Alex Elder <elder@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-02-06 20:51:05 +08:00
total_count = *resbcountp + nblks;
if (hardlimit && total_count > hardlimit) {
xfs: implement quota warnings via netlink Wire up quota_send_warning to send quota warnings over netlink. This is used by various desktops to show user quota warnings. Tested by running the quota_nld daemon while running the xfstest quota tests and observing the warnings. I'll see how I can get a more formal testcase for it written. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-01-18 06:36:19 +08:00
xfs_quota_warn(mp, dqp, QUOTA_NL_BHARDWARN);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
goto error_return;
xfs: implement quota warnings via netlink Wire up quota_send_warning to send quota warnings over netlink. This is used by various desktops to show user quota warnings. Tested by running the quota_nld daemon while running the xfstest quota tests and observing the warnings. I'll see how I can get a more formal testcase for it written. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-01-18 06:36:19 +08:00
}
xfs: cleanup quota check on disk blocks and inodes reservations This patch is a cleanup of quota check on disk blocks and inodes reservations, and changes it as follows. (1) add a total_count variable to store the total number of current usages and new reservations for disk blocks and inodes, respectively. (2) make it more readable to check if the local variables softlimit and hardlimit are positive. It has been changed as follows. if (softlimit > 0ULL) -> if (softlimit) if (hardlimit > 0ULL) -> if (hardlimit) This is because they are defined as xfs_qcnt_t which is unsigned. Signed-off-by: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com> Cc: Ben Myers <bpm@sgi.com> Cc: Alex Elder <elder@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-02-06 20:51:05 +08:00
if (softlimit && total_count > softlimit) {
xfs: implement quota warnings via netlink Wire up quota_send_warning to send quota warnings over netlink. This is used by various desktops to show user quota warnings. Tested by running the quota_nld daemon while running the xfstest quota tests and observing the warnings. I'll see how I can get a more formal testcase for it written. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-01-18 06:36:19 +08:00
if ((timer != 0 && get_seconds() > timer) ||
(warns != 0 && warns >= warnlimit)) {
xfs_quota_warn(mp, dqp,
QUOTA_NL_BSOFTLONGWARN);
goto error_return;
}
xfs_quota_warn(mp, dqp, QUOTA_NL_BSOFTWARN);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
if (ninos > 0) {
xfs: cleanup quota check on disk blocks and inodes reservations This patch is a cleanup of quota check on disk blocks and inodes reservations, and changes it as follows. (1) add a total_count variable to store the total number of current usages and new reservations for disk blocks and inodes, respectively. (2) make it more readable to check if the local variables softlimit and hardlimit are positive. It has been changed as follows. if (softlimit > 0ULL) -> if (softlimit) if (hardlimit > 0ULL) -> if (hardlimit) This is because they are defined as xfs_qcnt_t which is unsigned. Signed-off-by: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com> Cc: Ben Myers <bpm@sgi.com> Cc: Alex Elder <elder@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-02-06 20:51:05 +08:00
total_count = be64_to_cpu(dqp->q_core.d_icount) + ninos;
[XFS] endianess annotations and cleanup for the quota code SGI-PV: 943272 SGI-Modid: xfs-linux:xfs-kern:199767a Signed-off-by: Christoph Hellwig <hch@sgi.com> Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-11-02 12:01:12 +08:00
timer = be32_to_cpu(dqp->q_core.d_itimer);
warns = be16_to_cpu(dqp->q_core.d_iwarns);
xfs: access quotainfo structure directly Access fields in m_quotainfo directly instead of hiding them behind the XFS_QI_* macros. Add local variables for the quotainfo pointer in places where we have lots of them. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com>
2010-04-20 15:01:30 +08:00
warnlimit = dqp->q_mount->m_quotainfo->qi_iwarnlimit;
[XFS] endianess annotations and cleanup for the quota code SGI-PV: 943272 SGI-Modid: xfs-linux:xfs-kern:199767a Signed-off-by: Christoph Hellwig <hch@sgi.com> Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-11-02 12:01:12 +08:00
hardlimit = be64_to_cpu(dqp->q_core.d_ino_hardlimit);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (!hardlimit)
xfs: Split default quota limits by quota type Default quotas are globally set due historical reasons. IRIX only supported user and project quotas, and default quota was only applied to user quotas. In Linux, when a default quota is set, all different quota types inherits the same default value. An user with a quota limit larger than the default quota value, will still be limited to the default value because the group quotas also inherits the default quotas. Unless the group which the user belongs to have a custom quota limit set. This patch aims to split the default quota value by quota type. Allowing each quota type having different default values. Default time limits are still set globally. XFS does not set a per-user/group timer, but a single global timer. For changing this behavior, some changes should be made in user-space tools another bugs being fixed. Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-02-08 08:27:55 +08:00
hardlimit = defq->ihardlimit;
[XFS] endianess annotations and cleanup for the quota code SGI-PV: 943272 SGI-Modid: xfs-linux:xfs-kern:199767a Signed-off-by: Christoph Hellwig <hch@sgi.com> Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-11-02 12:01:12 +08:00
softlimit = be64_to_cpu(dqp->q_core.d_ino_softlimit);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (!softlimit)
xfs: Split default quota limits by quota type Default quotas are globally set due historical reasons. IRIX only supported user and project quotas, and default quota was only applied to user quotas. In Linux, when a default quota is set, all different quota types inherits the same default value. An user with a quota limit larger than the default quota value, will still be limited to the default value because the group quotas also inherits the default quotas. Unless the group which the user belongs to have a custom quota limit set. This patch aims to split the default quota value by quota type. Allowing each quota type having different default values. Default time limits are still set globally. XFS does not set a per-user/group timer, but a single global timer. For changing this behavior, some changes should be made in user-space tools another bugs being fixed. Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-02-08 08:27:55 +08:00
softlimit = defq->isoftlimit;
xfs: clean up error handling in xfs_trans_dqresv Move the error code selection after the goto label and fold the xfs_quota_error helper into it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-01-14 06:05:49 +08:00
xfs: cleanup quota check on disk blocks and inodes reservations This patch is a cleanup of quota check on disk blocks and inodes reservations, and changes it as follows. (1) add a total_count variable to store the total number of current usages and new reservations for disk blocks and inodes, respectively. (2) make it more readable to check if the local variables softlimit and hardlimit are positive. It has been changed as follows. if (softlimit > 0ULL) -> if (softlimit) if (hardlimit > 0ULL) -> if (hardlimit) This is because they are defined as xfs_qcnt_t which is unsigned. Signed-off-by: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com> Cc: Ben Myers <bpm@sgi.com> Cc: Alex Elder <elder@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-02-06 20:51:05 +08:00
if (hardlimit && total_count > hardlimit) {
xfs: implement quota warnings via netlink Wire up quota_send_warning to send quota warnings over netlink. This is used by various desktops to show user quota warnings. Tested by running the quota_nld daemon while running the xfstest quota tests and observing the warnings. I'll see how I can get a more formal testcase for it written. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-01-18 06:36:19 +08:00
xfs_quota_warn(mp, dqp, QUOTA_NL_IHARDWARN);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
goto error_return;
xfs: implement quota warnings via netlink Wire up quota_send_warning to send quota warnings over netlink. This is used by various desktops to show user quota warnings. Tested by running the quota_nld daemon while running the xfstest quota tests and observing the warnings. I'll see how I can get a more formal testcase for it written. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-01-18 06:36:19 +08:00
}
xfs: cleanup quota check on disk blocks and inodes reservations This patch is a cleanup of quota check on disk blocks and inodes reservations, and changes it as follows. (1) add a total_count variable to store the total number of current usages and new reservations for disk blocks and inodes, respectively. (2) make it more readable to check if the local variables softlimit and hardlimit are positive. It has been changed as follows. if (softlimit > 0ULL) -> if (softlimit) if (hardlimit > 0ULL) -> if (hardlimit) This is because they are defined as xfs_qcnt_t which is unsigned. Signed-off-by: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com> Cc: Ben Myers <bpm@sgi.com> Cc: Alex Elder <elder@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-02-06 20:51:05 +08:00
if (softlimit && total_count > softlimit) {
xfs: implement quota warnings via netlink Wire up quota_send_warning to send quota warnings over netlink. This is used by various desktops to show user quota warnings. Tested by running the quota_nld daemon while running the xfstest quota tests and observing the warnings. I'll see how I can get a more formal testcase for it written. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-01-18 06:36:19 +08:00
if ((timer != 0 && get_seconds() > timer) ||
(warns != 0 && warns >= warnlimit)) {
xfs_quota_warn(mp, dqp,
QUOTA_NL_ISOFTLONGWARN);
goto error_return;
}
xfs_quota_warn(mp, dqp, QUOTA_NL_ISOFTWARN);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
}
/*
* Change the reservation, but not the actual usage.
* Note that q_res_bcount = q_core.d_bcount + resv
*/
(*resbcountp) += (xfs_qcnt_t)nblks;
if (ninos != 0)
dqp->q_res_icount += (xfs_qcnt_t)ninos;
/*
* note the reservation amt in the trans struct too,
* so that the transaction knows how much was reserved by
* it against this particular dquot.
* We don't do this when we are reserving for a delayed allocation,
* because we don't have the luxury of a transaction envelope then.
*/
if (tp) {
ASSERT(tp->t_dqinfo);
ASSERT(flags & XFS_QMOPT_RESBLK_MASK);
if (nblks != 0)
xfs_trans_mod_dquot(tp, dqp,
flags & XFS_QMOPT_RESBLK_MASK,
nblks);
if (ninos != 0)
xfs_trans_mod_dquot(tp, dqp,
XFS_TRANS_DQ_RES_INOS,
ninos);
}
[XFS] endianess annotations and cleanup for the quota code SGI-PV: 943272 SGI-Modid: xfs-linux:xfs-kern:199767a Signed-off-by: Christoph Hellwig <hch@sgi.com> Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-11-02 12:01:12 +08:00
ASSERT(dqp->q_res_bcount >= be64_to_cpu(dqp->q_core.d_bcount));
ASSERT(dqp->q_res_rtbcount >= be64_to_cpu(dqp->q_core.d_rtbcount));
ASSERT(dqp->q_res_icount >= be64_to_cpu(dqp->q_core.d_icount));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
xfs: clean up error handling in xfs_trans_dqresv Move the error code selection after the goto label and fold the xfs_quota_error helper into it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-01-14 06:05:49 +08:00
xfs_dqunlock(dqp);
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
error_return:
xfs: remove the unused XFS_QMOPT_DQLOCK flag The XFS_QMOPT_DQLOCK flag introduces major complexity in the quota subsystem but isn't actually used anywhere. So remove it and all the hazzles it introduces. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com>
2009-02-09 04:51:42 +08:00
xfs_dqunlock(dqp);
xfs: clean up error handling in xfs_trans_dqresv Move the error code selection after the goto label and fold the xfs_quota_error helper into it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-01-14 06:05:49 +08:00
if (flags & XFS_QMOPT_ENOSPC)
xfs: global error sign conversion Convert all the errors the core XFs code to negative error signs like the rest of the kernel and remove all the sign conversion we do in the interface layers. Errors for conversion (and comparison) found via searches like: $ git grep " E" fs/xfs $ git grep "return E" fs/xfs $ git grep " E[A-Z].*;$" fs/xfs Negation points found via searches like: $ git grep "= -[a-z,A-Z]" fs/xfs $ git grep "return -[a-z,A-D,F-Z]" fs/xfs $ git grep " -[a-z].*;" fs/xfs [ with some bits I missed from Brian Foster ] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-06-25 12:58:08 +08:00
return -ENOSPC;
return -EDQUOT;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
/*
[XFS] Make project quota enforcement return an error code consistent with its use. SGI-PV: 951300 SGI-Modid: xfs-linux-melb:xfs-kern:25633a Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-03-31 11:04:49 +08:00
* Given dquot(s), make disk block and/or inode reservations against them.
xfs: Add pquota fields where gquota is used. Add project quota changes to all the places where group quota field is used: * add separate project quota members into various structures * split project quota and group quotas so that instead of overriding the group quota members incore, the new project quota members are used instead * get rid of usage of the OQUOTA flag incore, in favor of separate group and project quota flags. * add a project dquot argument to various functions. Not using the pquotino field from superblock yet. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-07-11 13:00:40 +08:00
* The fact that this does the reservation against user, group and
* project quotas is important, because this follows a all-or-nothing
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* approach.
*
xfs: remove the unused XFS_QMOPT_DQLOCK flag The XFS_QMOPT_DQLOCK flag introduces major complexity in the quota subsystem but isn't actually used anywhere. So remove it and all the hazzles it introduces. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Felix Blyakher <felixb@sgi.com>
2009-02-09 04:51:42 +08:00
* flags = XFS_QMOPT_FORCE_RES evades limit enforcement. Used by chown.
[XFS] Make project quota enforcement return an error code consistent with its use. SGI-PV: 951300 SGI-Modid: xfs-linux-melb:xfs-kern:25633a Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-03-31 11:04:49 +08:00
* XFS_QMOPT_ENOSPC returns ENOSPC not EDQUOT. Used by pquota.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* XFS_TRANS_DQ_RES_BLKS reserves regular disk blocks
* XFS_TRANS_DQ_RES_RTBLKS reserves realtime disk blocks
* dquots are unlocked on return, if they were not locked by caller.
*/
int
xfs_trans_reserve_quota_bydquots(
xfs: Code cleanup and removal of some typedef usage In preparation for combined pquota/gquota support, for the sake of readability, do some code cleanup surrounding the affected code. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-06-28 06:25:07 +08:00
struct xfs_trans *tp,
struct xfs_mount *mp,
struct xfs_dquot *udqp,
struct xfs_dquot *gdqp,
xfs: Add pquota fields where gquota is used. Add project quota changes to all the places where group quota field is used: * add separate project quota members into various structures * split project quota and group quotas so that instead of overriding the group quota members incore, the new project quota members are used instead * get rid of usage of the OQUOTA flag incore, in favor of separate group and project quota flags. * add a project dquot argument to various functions. Not using the pquotino field from superblock yet. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-07-11 13:00:40 +08:00
struct xfs_dquot *pdqp,
xfs: widen quota block counters to 64-bit integers Widen the incore quota transaction delta structure to treat block counters as 64-bit integers. This is a necessary addition so that we can widen the i_delayed_blks counter to be a 64-bit integer. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Allison Collins <allison.henderson@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-04-18 07:30:24 +08:00
int64_t nblks,
xfs: Code cleanup and removal of some typedef usage In preparation for combined pquota/gquota support, for the sake of readability, do some code cleanup surrounding the affected code. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-06-28 06:25:07 +08:00
long ninos,
uint flags)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
xfs: Code cleanup and removal of some typedef usage In preparation for combined pquota/gquota support, for the sake of readability, do some code cleanup surrounding the affected code. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-06-28 06:25:07 +08:00
int error;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
xfs: kill xfs_qmops Kill the quota ops function vector and replace it with direct calls or stubs in the CONFIG_XFS_QUOTA=n case. Make sure we check XFS_IS_QUOTA_RUNNING in the right spots. We can remove the number of those checks because the XFS_TRANS_DQ_DIRTY flag can't be set otherwise. This brings us back closer to the way this code worked in IRIX and earlier Linux versions, but we keep a lot of the more useful factoring of common code. Eventually we should also kill xfs_qm_bhv.c, but that's left for a later patch. Reduces the size of the source code by about 250 lines and the size of XFS module by about 1.5 kilobytes with quotas enabled: text data bss dec hex filename 615957 2960 3848 622765 980ad fs/xfs/xfs.o 617231 3152 3848 624231 98667 fs/xfs/xfs.o.old Fallout: - xfs_qm_dqattach is split into xfs_qm_dqattach_locked which expects the inode locked and xfs_qm_dqattach which does the locking around it, thus removing XFS_QMOPT_ILOCKED. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2009-06-08 21:33:32 +08:00
if (!XFS_IS_QUOTA_RUNNING(mp) || !XFS_IS_QUOTA_ON(mp))
[XFS] Make project quota enforcement return an error code consistent with its use. SGI-PV: 951300 SGI-Modid: xfs-linux-melb:xfs-kern:25633a Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-03-31 11:04:49 +08:00
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (tp && tp->t_dqinfo == NULL)
xfs_trans_alloc_dqinfo(tp);
ASSERT(flags & XFS_QMOPT_RESBLK_MASK);
if (udqp) {
[XFS] Make project quota enforcement return an error code consistent with its use. SGI-PV: 951300 SGI-Modid: xfs-linux-melb:xfs-kern:25633a Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-03-31 11:04:49 +08:00
error = xfs_trans_dqresv(tp, mp, udqp, nblks, ninos,
(flags & ~XFS_QMOPT_ENOSPC));
if (error)
return error;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
if (gdqp) {
[XFS] Make project quota enforcement return an error code consistent with its use. SGI-PV: 951300 SGI-Modid: xfs-linux-melb:xfs-kern:25633a Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-03-31 11:04:49 +08:00
error = xfs_trans_dqresv(tp, mp, gdqp, nblks, ninos, flags);
xfs: Code cleanup and removal of some typedef usage In preparation for combined pquota/gquota support, for the sake of readability, do some code cleanup surrounding the affected code. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-06-28 06:25:07 +08:00
if (error)
goto unwind_usr;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
xfs: Add pquota fields where gquota is used. Add project quota changes to all the places where group quota field is used: * add separate project quota members into various structures * split project quota and group quotas so that instead of overriding the group quota members incore, the new project quota members are used instead * get rid of usage of the OQUOTA flag incore, in favor of separate group and project quota flags. * add a project dquot argument to various functions. Not using the pquotino field from superblock yet. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-07-11 13:00:40 +08:00
if (pdqp) {
error = xfs_trans_dqresv(tp, mp, pdqp, nblks, ninos, flags);
if (error)
goto unwind_grp;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
[XFS] We really suck at spulling. Thanks to Chris Pascoe for fixing all these typos. SGI-PV: 904196 SGI-Modid: xfs-linux-melb:xfs-kern:25539a Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-03-29 06:55:14 +08:00
* Didn't change anything critical, so, no need to log
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
[XFS] Make project quota enforcement return an error code consistent with its use. SGI-PV: 951300 SGI-Modid: xfs-linux-melb:xfs-kern:25633a Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-03-31 11:04:49 +08:00
return 0;
xfs: Code cleanup and removal of some typedef usage In preparation for combined pquota/gquota support, for the sake of readability, do some code cleanup surrounding the affected code. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-06-28 06:25:07 +08:00
xfs: Add pquota fields where gquota is used. Add project quota changes to all the places where group quota field is used: * add separate project quota members into various structures * split project quota and group quotas so that instead of overriding the group quota members incore, the new project quota members are used instead * get rid of usage of the OQUOTA flag incore, in favor of separate group and project quota flags. * add a project dquot argument to various functions. Not using the pquotino field from superblock yet. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-07-11 13:00:40 +08:00
unwind_grp:
flags |= XFS_QMOPT_FORCE_RES;
if (gdqp)
xfs_trans_dqresv(tp, mp, gdqp, -nblks, -ninos, flags);
xfs: Code cleanup and removal of some typedef usage In preparation for combined pquota/gquota support, for the sake of readability, do some code cleanup surrounding the affected code. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-06-28 06:25:07 +08:00
unwind_usr:
flags |= XFS_QMOPT_FORCE_RES;
if (udqp)
xfs_trans_dqresv(tp, mp, udqp, -nblks, -ninos, flags);
return error;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
/*
* Lock the dquot and change the reservation if we can.
* This doesn't change the actual usage, just the reservation.
* The inode sent in is locked.
*/
xfs: kill xfs_qmops Kill the quota ops function vector and replace it with direct calls or stubs in the CONFIG_XFS_QUOTA=n case. Make sure we check XFS_IS_QUOTA_RUNNING in the right spots. We can remove the number of those checks because the XFS_TRANS_DQ_DIRTY flag can't be set otherwise. This brings us back closer to the way this code worked in IRIX and earlier Linux versions, but we keep a lot of the more useful factoring of common code. Eventually we should also kill xfs_qm_bhv.c, but that's left for a later patch. Reduces the size of the source code by about 250 lines and the size of XFS module by about 1.5 kilobytes with quotas enabled: text data bss dec hex filename 615957 2960 3848 622765 980ad fs/xfs/xfs.o 617231 3152 3848 624231 98667 fs/xfs/xfs.o.old Fallout: - xfs_qm_dqattach is split into xfs_qm_dqattach_locked which expects the inode locked and xfs_qm_dqattach which does the locking around it, thus removing XFS_QMOPT_ILOCKED. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2009-06-08 21:33:32 +08:00
int
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
xfs_trans_reserve_quota_nblks(
xfs: kill xfs_qmops Kill the quota ops function vector and replace it with direct calls or stubs in the CONFIG_XFS_QUOTA=n case. Make sure we check XFS_IS_QUOTA_RUNNING in the right spots. We can remove the number of those checks because the XFS_TRANS_DQ_DIRTY flag can't be set otherwise. This brings us back closer to the way this code worked in IRIX and earlier Linux versions, but we keep a lot of the more useful factoring of common code. Eventually we should also kill xfs_qm_bhv.c, but that's left for a later patch. Reduces the size of the source code by about 250 lines and the size of XFS module by about 1.5 kilobytes with quotas enabled: text data bss dec hex filename 615957 2960 3848 622765 980ad fs/xfs/xfs.o 617231 3152 3848 624231 98667 fs/xfs/xfs.o.old Fallout: - xfs_qm_dqattach is split into xfs_qm_dqattach_locked which expects the inode locked and xfs_qm_dqattach which does the locking around it, thus removing XFS_QMOPT_ILOCKED. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2009-06-08 21:33:32 +08:00
struct xfs_trans *tp,
struct xfs_inode *ip,
xfs: widen quota block counters to 64-bit integers Widen the incore quota transaction delta structure to treat block counters as 64-bit integers. This is a necessary addition so that we can widen the i_delayed_blks counter to be a 64-bit integer. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Allison Collins <allison.henderson@oracle.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-04-18 07:30:24 +08:00
int64_t nblks,
xfs: kill xfs_qmops Kill the quota ops function vector and replace it with direct calls or stubs in the CONFIG_XFS_QUOTA=n case. Make sure we check XFS_IS_QUOTA_RUNNING in the right spots. We can remove the number of those checks because the XFS_TRANS_DQ_DIRTY flag can't be set otherwise. This brings us back closer to the way this code worked in IRIX and earlier Linux versions, but we keep a lot of the more useful factoring of common code. Eventually we should also kill xfs_qm_bhv.c, but that's left for a later patch. Reduces the size of the source code by about 250 lines and the size of XFS module by about 1.5 kilobytes with quotas enabled: text data bss dec hex filename 615957 2960 3848 622765 980ad fs/xfs/xfs.o 617231 3152 3848 624231 98667 fs/xfs/xfs.o.old Fallout: - xfs_qm_dqattach is split into xfs_qm_dqattach_locked which expects the inode locked and xfs_qm_dqattach which does the locking around it, thus removing XFS_QMOPT_ILOCKED. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2009-06-08 21:33:32 +08:00
long ninos,
uint flags)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
xfs: kill xfs_qmops Kill the quota ops function vector and replace it with direct calls or stubs in the CONFIG_XFS_QUOTA=n case. Make sure we check XFS_IS_QUOTA_RUNNING in the right spots. We can remove the number of those checks because the XFS_TRANS_DQ_DIRTY flag can't be set otherwise. This brings us back closer to the way this code worked in IRIX and earlier Linux versions, but we keep a lot of the more useful factoring of common code. Eventually we should also kill xfs_qm_bhv.c, but that's left for a later patch. Reduces the size of the source code by about 250 lines and the size of XFS module by about 1.5 kilobytes with quotas enabled: text data bss dec hex filename 615957 2960 3848 622765 980ad fs/xfs/xfs.o 617231 3152 3848 624231 98667 fs/xfs/xfs.o.old Fallout: - xfs_qm_dqattach is split into xfs_qm_dqattach_locked which expects the inode locked and xfs_qm_dqattach which does the locking around it, thus removing XFS_QMOPT_ILOCKED. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2009-06-08 21:33:32 +08:00
struct xfs_mount *mp = ip->i_mount;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
xfs: kill xfs_qmops Kill the quota ops function vector and replace it with direct calls or stubs in the CONFIG_XFS_QUOTA=n case. Make sure we check XFS_IS_QUOTA_RUNNING in the right spots. We can remove the number of those checks because the XFS_TRANS_DQ_DIRTY flag can't be set otherwise. This brings us back closer to the way this code worked in IRIX and earlier Linux versions, but we keep a lot of the more useful factoring of common code. Eventually we should also kill xfs_qm_bhv.c, but that's left for a later patch. Reduces the size of the source code by about 250 lines and the size of XFS module by about 1.5 kilobytes with quotas enabled: text data bss dec hex filename 615957 2960 3848 622765 980ad fs/xfs/xfs.o 617231 3152 3848 624231 98667 fs/xfs/xfs.o.old Fallout: - xfs_qm_dqattach is split into xfs_qm_dqattach_locked which expects the inode locked and xfs_qm_dqattach which does the locking around it, thus removing XFS_QMOPT_ILOCKED. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2009-06-08 21:33:32 +08:00
if (!XFS_IS_QUOTA_RUNNING(mp) || !XFS_IS_QUOTA_ON(mp))
[XFS] Make project quota enforcement return an error code consistent with its use. SGI-PV: 951300 SGI-Modid: xfs-linux-melb:xfs-kern:25633a Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-03-31 11:04:49 +08:00
return 0;
if (XFS_IS_PQUOTA_ON(mp))
flags |= XFS_QMOPT_ENOSPC;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
xfs: Define a new function xfs_is_quota_inode() In preparation for combined pquota/gquota support, define a new function to check if the given inode is a quota inode. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-06-28 06:25:04 +08:00
ASSERT(!xfs_is_quota_inode(&mp->m_sb, ip->i_ino));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[XFS] shrink mrlock_t The writer field is not needed for non_DEBU builds so remove it. While we're at i also clean up the interface for is locked asserts to go through and xfs_iget.c helper with an interface like the xfs_ilock routines to isolated the XFS codebase from mrlock internals. That way we can kill mrlock_t entirely once rw_semaphores grow an islocked facility. Also remove unused flags to the ilock family of functions. SGI-PV: 976035 SGI-Modid: xfs-linux-melb:xfs-kern:30902a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-04-22 15:34:00 +08:00
ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL));
[XFS] Make project quota enforcement return an error code consistent with its use. SGI-PV: 951300 SGI-Modid: xfs-linux-melb:xfs-kern:25633a Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-03-31 11:04:49 +08:00
ASSERT((flags & ~(XFS_QMOPT_FORCE_RES | XFS_QMOPT_ENOSPC)) ==
XFS_TRANS_DQ_RES_RTBLKS ||
(flags & ~(XFS_QMOPT_FORCE_RES | XFS_QMOPT_ENOSPC)) ==
XFS_TRANS_DQ_RES_BLKS);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* Reserve nblks against these dquots, with trans as the mediator.
*/
xfs: kill xfs_qmops Kill the quota ops function vector and replace it with direct calls or stubs in the CONFIG_XFS_QUOTA=n case. Make sure we check XFS_IS_QUOTA_RUNNING in the right spots. We can remove the number of those checks because the XFS_TRANS_DQ_DIRTY flag can't be set otherwise. This brings us back closer to the way this code worked in IRIX and earlier Linux versions, but we keep a lot of the more useful factoring of common code. Eventually we should also kill xfs_qm_bhv.c, but that's left for a later patch. Reduces the size of the source code by about 250 lines and the size of XFS module by about 1.5 kilobytes with quotas enabled: text data bss dec hex filename 615957 2960 3848 622765 980ad fs/xfs/xfs.o 617231 3152 3848 624231 98667 fs/xfs/xfs.o.old Fallout: - xfs_qm_dqattach is split into xfs_qm_dqattach_locked which expects the inode locked and xfs_qm_dqattach which does the locking around it, thus removing XFS_QMOPT_ILOCKED. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2009-06-08 21:33:32 +08:00
return xfs_trans_reserve_quota_bydquots(tp, mp,
ip->i_udquot, ip->i_gdquot,
xfs: Add pquota fields where gquota is used. Add project quota changes to all the places where group quota field is used: * add separate project quota members into various structures * split project quota and group quotas so that instead of overriding the group quota members incore, the new project quota members are used instead * get rid of usage of the OQUOTA flag incore, in favor of separate group and project quota flags. * add a project dquot argument to various functions. Not using the pquotino field from superblock yet. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-07-11 13:00:40 +08:00
ip->i_pdquot,
xfs: kill xfs_qmops Kill the quota ops function vector and replace it with direct calls or stubs in the CONFIG_XFS_QUOTA=n case. Make sure we check XFS_IS_QUOTA_RUNNING in the right spots. We can remove the number of those checks because the XFS_TRANS_DQ_DIRTY flag can't be set otherwise. This brings us back closer to the way this code worked in IRIX and earlier Linux versions, but we keep a lot of the more useful factoring of common code. Eventually we should also kill xfs_qm_bhv.c, but that's left for a later patch. Reduces the size of the source code by about 250 lines and the size of XFS module by about 1.5 kilobytes with quotas enabled: text data bss dec hex filename 615957 2960 3848 622765 980ad fs/xfs/xfs.o 617231 3152 3848 624231 98667 fs/xfs/xfs.o.old Fallout: - xfs_qm_dqattach is split into xfs_qm_dqattach_locked which expects the inode locked and xfs_qm_dqattach which does the locking around it, thus removing XFS_QMOPT_ILOCKED. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2009-06-08 21:33:32 +08:00
nblks, ninos, flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
/*
* This routine is called to allocate a quotaoff log item.
*/
xfs_qoff_logitem_t *
xfs_trans_get_qoff_item(
xfs_trans_t *tp,
xfs_qoff_logitem_t *startqoff,
uint flags)
{
xfs_qoff_logitem_t *q;
ASSERT(tp != NULL);
q = xfs_qm_qoff_logitem_init(tp->t_mountp, startqoff, flags);
ASSERT(q != NULL);
/*
* Get a log_item_desc to point at the new item.
*/
xfs: simplify log item descriptor tracking Currently we track log item descriptor belonging to a transaction using a complex opencoded chunk allocator. This code has been there since day one and seems to work around the lack of an efficient slab allocator. This patch replaces it with dynamically allocated log item descriptors from a dedicated slab pool, linked to the transaction by a linked list. This allows to greatly simplify the log item descriptor tracking to the point where it's just a couple hundred lines in xfs_trans.c instead of a separate file. The external API has also been simplified while we're at it - the xfs_trans_add_item and xfs_trans_del_item functions to add/ delete items from a transaction have been simplified to the bare minium, and the xfs_trans_find_item function is replaced with a direct dereference of the li_desc field. All debug code walking the list of log items in a transaction is down to a simple list_for_each_entry. Note that we could easily use a singly linked list here instead of the double linked list from list.h as the fastpath only does deletion from sequential traversal. But given that we don't have one available as a library function yet I use the list.h functions for simplicity. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2010-06-23 16:11:15 +08:00
xfs_trans_add_item(tp, &q->qql_item);
return q;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
/*
* This is called to mark the quotaoff logitem as needing
* to be logged when the transaction is committed. The logitem must
* already be associated with the given transaction.
*/
void
xfs_trans_log_quotaoff_item(
xfs_trans_t *tp,
xfs_qoff_logitem_t *qlp)
{
tp->t_flags |= XFS_TRANS_DIRTY;
xfs: get rid of the log item descriptor It's just a connector between a transaction and a log item. There's a 1:1 relationship between a log item descriptor and a log item, and a 1:1 relationship between a log item descriptor and a transaction. Both relationships are created and terminated at the same time, so why do we even have the descriptor? Replace it with a specific list_head in the log item and a new log item dirtied flag to replace the XFS_LID_DIRTY flag. Signed-Off-By: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> [darrick: fix up deferred agfl intent finish_item use of LID_DIRTY] Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-05-09 22:49:37 +08:00
set_bit(XFS_LI_DIRTY, &qlp->qql_item.li_flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
STATIC void
xfs_trans_alloc_dqinfo(
xfs_trans_t *tp)
{
xfs: remove the global xfs_Gqm structure If we initialize the slab caches for the quota code when XFS is loaded there is no need for a global and reference counted quota manager structure. Drop all this overhead and also fix the error handling during quota initialization. Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-03-13 16:52:37 +08:00
tp->t_dqinfo = kmem_zone_zalloc(xfs_qm_dqtrxzone, KM_SLEEP);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
xfs: kill xfs_qmops Kill the quota ops function vector and replace it with direct calls or stubs in the CONFIG_XFS_QUOTA=n case. Make sure we check XFS_IS_QUOTA_RUNNING in the right spots. We can remove the number of those checks because the XFS_TRANS_DQ_DIRTY flag can't be set otherwise. This brings us back closer to the way this code worked in IRIX and earlier Linux versions, but we keep a lot of the more useful factoring of common code. Eventually we should also kill xfs_qm_bhv.c, but that's left for a later patch. Reduces the size of the source code by about 250 lines and the size of XFS module by about 1.5 kilobytes with quotas enabled: text data bss dec hex filename 615957 2960 3848 622765 980ad fs/xfs/xfs.o 617231 3152 3848 624231 98667 fs/xfs/xfs.o.old Fallout: - xfs_qm_dqattach is split into xfs_qm_dqattach_locked which expects the inode locked and xfs_qm_dqattach which does the locking around it, thus removing XFS_QMOPT_ILOCKED. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2009-06-08 21:33:32 +08:00
void
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
xfs_trans_free_dqinfo(
xfs_trans_t *tp)
{
if (!tp->t_dqinfo)
return;
xfs: remove the global xfs_Gqm structure If we initialize the slab caches for the quota code when XFS is loaded there is no need for a global and reference counted quota manager structure. Drop all this overhead and also fix the error handling during quota initialization. Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-03-13 16:52:37 +08:00
kmem_zone_free(xfs_qm_dqtrxzone, tp->t_dqinfo);
xfs: kill xfs_qmops Kill the quota ops function vector and replace it with direct calls or stubs in the CONFIG_XFS_QUOTA=n case. Make sure we check XFS_IS_QUOTA_RUNNING in the right spots. We can remove the number of those checks because the XFS_TRANS_DQ_DIRTY flag can't be set otherwise. This brings us back closer to the way this code worked in IRIX and earlier Linux versions, but we keep a lot of the more useful factoring of common code. Eventually we should also kill xfs_qm_bhv.c, but that's left for a later patch. Reduces the size of the source code by about 250 lines and the size of XFS module by about 1.5 kilobytes with quotas enabled: text data bss dec hex filename 615957 2960 3848 622765 980ad fs/xfs/xfs.o 617231 3152 3848 624231 98667 fs/xfs/xfs.o.old Fallout: - xfs_qm_dqattach is split into xfs_qm_dqattach_locked which expects the inode locked and xfs_qm_dqattach which does the locking around it, thus removing XFS_QMOPT_ILOCKED. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Sandeen <sandeen@sandeen.net>
2009-06-08 21:33:32 +08:00
tp->t_dqinfo = NULL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}