linux-sg2042/drivers/isdn/hisax/jade.c

306 lines
8.1 KiB
C
Raw Normal View History

/* $Id: jade.c,v 1.9.2.4 2004/01/14 16:04:48 keil Exp $
*
* JADE stuff (derived from original hscx.c)
*
* Author Roland Klabunde
* Copyright by Roland Klabunde <R.Klabunde@Berkom.de>
*
* This software may be used and distributed according to the terms
* of the GNU General Public License, incorporated herein by reference.
*
*/
#include <linux/init.h>
#include "hisax.h"
#include "hscx.h"
#include "jade.h"
#include "isdnl1.h"
#include <linux/interrupt.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
int
JadeVersion(struct IsdnCardState *cs, char *s)
{
int ver;
int to = 50;
cs->BC_Write_Reg(cs, -1, 0x50, 0x19);
while (to) {
udelay(1);
ver = cs->BC_Read_Reg(cs, -1, 0x60);
to--;
if (ver)
break;
if (!to) {
printk(KERN_INFO "%s JADE version not obtainable\n", s);
return (0);
}
}
/* Wait for the JADE */
udelay(10);
/* Read version */
ver = cs->BC_Read_Reg(cs, -1, 0x60);
printk(KERN_INFO "%s JADE version: %d\n", s, ver);
return (1);
}
/* Write to indirect accessible jade register set */
static void
jade_write_indirect(struct IsdnCardState *cs, u_char reg, u_char value)
{
int to = 50;
u_char ret;
/* Write the data */
cs->BC_Write_Reg(cs, -1, COMM_JADE + 1, value);
/* Say JADE we wanna write indirect reg 'reg' */
cs->BC_Write_Reg(cs, -1, COMM_JADE, reg);
to = 50;
/* Wait for RDY goes high */
while (to) {
udelay(1);
ret = cs->BC_Read_Reg(cs, -1, COMM_JADE);
to--;
if (ret & 1)
/* Got acknowledge */
break;
if (!to) {
printk(KERN_INFO "Can not see ready bit from JADE DSP (reg=0x%X, value=0x%X)\n", reg, value);
return;
}
}
}
static void
modejade(struct BCState *bcs, int mode, int bc)
{
struct IsdnCardState *cs = bcs->cs;
int jade = bcs->hw.hscx.hscx;
if (cs->debug & L1_DEB_HSCX) {
debugl1(cs, "jade %c mode %d ichan %d", 'A' + jade, mode, bc);
}
bcs->mode = mode;
bcs->channel = bc;
cs->BC_Write_Reg(cs, jade, jade_HDLC_MODE, (mode == L1_MODE_TRANS ? jadeMODE_TMO : 0x00));
cs->BC_Write_Reg(cs, jade, jade_HDLC_CCR0, (jadeCCR0_PU | jadeCCR0_ITF));
cs->BC_Write_Reg(cs, jade, jade_HDLC_CCR1, 0x00);
jade_write_indirect(cs, jade_HDLC1SERRXPATH, 0x08);
jade_write_indirect(cs, jade_HDLC2SERRXPATH, 0x08);
jade_write_indirect(cs, jade_HDLC1SERTXPATH, 0x00);
jade_write_indirect(cs, jade_HDLC2SERTXPATH, 0x00);
cs->BC_Write_Reg(cs, jade, jade_HDLC_XCCR, 0x07);
cs->BC_Write_Reg(cs, jade, jade_HDLC_RCCR, 0x07);
if (bc == 0) {
cs->BC_Write_Reg(cs, jade, jade_HDLC_TSAX, 0x00);
cs->BC_Write_Reg(cs, jade, jade_HDLC_TSAR, 0x00);
} else {
cs->BC_Write_Reg(cs, jade, jade_HDLC_TSAX, 0x04);
cs->BC_Write_Reg(cs, jade, jade_HDLC_TSAR, 0x04);
}
switch (mode) {
case (L1_MODE_NULL):
cs->BC_Write_Reg(cs, jade, jade_HDLC_MODE, jadeMODE_TMO);
break;
case (L1_MODE_TRANS):
cs->BC_Write_Reg(cs, jade, jade_HDLC_MODE, (jadeMODE_TMO | jadeMODE_RAC | jadeMODE_XAC));
break;
case (L1_MODE_HDLC):
cs->BC_Write_Reg(cs, jade, jade_HDLC_MODE, (jadeMODE_RAC | jadeMODE_XAC));
break;
}
if (mode) {
cs->BC_Write_Reg(cs, jade, jade_HDLC_RCMD, (jadeRCMD_RRES | jadeRCMD_RMC));
cs->BC_Write_Reg(cs, jade, jade_HDLC_XCMD, jadeXCMD_XRES);
/* Unmask ints */
cs->BC_Write_Reg(cs, jade, jade_HDLC_IMR, 0xF8);
}
else
/* Mask ints */
cs->BC_Write_Reg(cs, jade, jade_HDLC_IMR, 0x00);
}
static void
jade_l2l1(struct PStack *st, int pr, void *arg)
{
struct BCState *bcs = st->l1.bcs;
struct sk_buff *skb = arg;
u_long flags;
switch (pr) {
case (PH_DATA | REQUEST):
spin_lock_irqsave(&bcs->cs->lock, flags);
if (bcs->tx_skb) {
skb_queue_tail(&bcs->squeue, skb);
} else {
bcs->tx_skb = skb;
test_and_set_bit(BC_FLG_BUSY, &bcs->Flag);
bcs->hw.hscx.count = 0;
bcs->cs->BC_Send_Data(bcs);
}
spin_unlock_irqrestore(&bcs->cs->lock, flags);
break;
case (PH_PULL | INDICATION):
spin_lock_irqsave(&bcs->cs->lock, flags);
if (bcs->tx_skb) {
printk(KERN_WARNING "jade_l2l1: this shouldn't happen\n");
} else {
test_and_set_bit(BC_FLG_BUSY, &bcs->Flag);
bcs->tx_skb = skb;
bcs->hw.hscx.count = 0;
bcs->cs->BC_Send_Data(bcs);
}
spin_unlock_irqrestore(&bcs->cs->lock, flags);
break;
case (PH_PULL | REQUEST):
if (!bcs->tx_skb) {
test_and_clear_bit(FLG_L1_PULL_REQ, &st->l1.Flags);
st->l1.l1l2(st, PH_PULL | CONFIRM, NULL);
} else
test_and_set_bit(FLG_L1_PULL_REQ, &st->l1.Flags);
break;
case (PH_ACTIVATE | REQUEST):
spin_lock_irqsave(&bcs->cs->lock, flags);
test_and_set_bit(BC_FLG_ACTIV, &bcs->Flag);
modejade(bcs, st->l1.mode, st->l1.bc);
spin_unlock_irqrestore(&bcs->cs->lock, flags);
l1_msg_b(st, pr, arg);
break;
case (PH_DEACTIVATE | REQUEST):
l1_msg_b(st, pr, arg);
break;
case (PH_DEACTIVATE | CONFIRM):
spin_lock_irqsave(&bcs->cs->lock, flags);
test_and_clear_bit(BC_FLG_ACTIV, &bcs->Flag);
test_and_clear_bit(BC_FLG_BUSY, &bcs->Flag);
modejade(bcs, 0, st->l1.bc);
spin_unlock_irqrestore(&bcs->cs->lock, flags);
st->l1.l1l2(st, PH_DEACTIVATE | CONFIRM, NULL);
break;
}
}
static void
close_jadestate(struct BCState *bcs)
{
modejade(bcs, 0, bcs->channel);
if (test_and_clear_bit(BC_FLG_INIT, &bcs->Flag)) {
kfree(bcs->hw.hscx.rcvbuf);
bcs->hw.hscx.rcvbuf = NULL;
kfree(bcs->blog);
bcs->blog = NULL;
skb_queue_purge(&bcs->rqueue);
skb_queue_purge(&bcs->squeue);
if (bcs->tx_skb) {
dev_kfree_skb_any(bcs->tx_skb);
bcs->tx_skb = NULL;
test_and_clear_bit(BC_FLG_BUSY, &bcs->Flag);
}
}
}
static int
open_jadestate(struct IsdnCardState *cs, struct BCState *bcs)
{
if (!test_and_set_bit(BC_FLG_INIT, &bcs->Flag)) {
if (!(bcs->hw.hscx.rcvbuf = kmalloc(HSCX_BUFMAX, GFP_ATOMIC))) {
printk(KERN_WARNING
"HiSax: No memory for hscx.rcvbuf\n");
test_and_clear_bit(BC_FLG_INIT, &bcs->Flag);
return (1);
}
if (!(bcs->blog = kmalloc(MAX_BLOG_SPACE, GFP_ATOMIC))) {
printk(KERN_WARNING
"HiSax: No memory for bcs->blog\n");
test_and_clear_bit(BC_FLG_INIT, &bcs->Flag);
kfree(bcs->hw.hscx.rcvbuf);
bcs->hw.hscx.rcvbuf = NULL;
return (2);
}
skb_queue_head_init(&bcs->rqueue);
skb_queue_head_init(&bcs->squeue);
}
bcs->tx_skb = NULL;
test_and_clear_bit(BC_FLG_BUSY, &bcs->Flag);
bcs->event = 0;
bcs->hw.hscx.rcvidx = 0;
bcs->tx_cnt = 0;
return (0);
}
static int
setstack_jade(struct PStack *st, struct BCState *bcs)
{
bcs->channel = st->l1.bc;
if (open_jadestate(st->l1.hardware, bcs))
return (-1);
st->l1.bcs = bcs;
st->l2.l2l1 = jade_l2l1;
setstack_manager(st);
bcs->st = st;
setstack_l1_B(st);
return (0);
}
void
clear_pending_jade_ints(struct IsdnCardState *cs)
{
int val;
cs->BC_Write_Reg(cs, 0, jade_HDLC_IMR, 0x00);
cs->BC_Write_Reg(cs, 1, jade_HDLC_IMR, 0x00);
val = cs->BC_Read_Reg(cs, 1, jade_HDLC_ISR);
debugl1(cs, "jade B ISTA %x", val);
val = cs->BC_Read_Reg(cs, 0, jade_HDLC_ISR);
debugl1(cs, "jade A ISTA %x", val);
val = cs->BC_Read_Reg(cs, 1, jade_HDLC_STAR);
debugl1(cs, "jade B STAR %x", val);
val = cs->BC_Read_Reg(cs, 0, jade_HDLC_STAR);
debugl1(cs, "jade A STAR %x", val);
/* Unmask ints */
cs->BC_Write_Reg(cs, 0, jade_HDLC_IMR, 0xF8);
cs->BC_Write_Reg(cs, 1, jade_HDLC_IMR, 0xF8);
}
void
initjade(struct IsdnCardState *cs)
{
cs->bcs[0].BC_SetStack = setstack_jade;
cs->bcs[1].BC_SetStack = setstack_jade;
cs->bcs[0].BC_Close = close_jadestate;
cs->bcs[1].BC_Close = close_jadestate;
cs->bcs[0].hw.hscx.hscx = 0;
cs->bcs[1].hw.hscx.hscx = 1;
/* Stop DSP audio tx/rx */
jade_write_indirect(cs, 0x11, 0x0f);
jade_write_indirect(cs, 0x17, 0x2f);
/* Transparent Mode, RxTx inactive, No Test, No RFS/TFS */
cs->BC_Write_Reg(cs, 0, jade_HDLC_MODE, jadeMODE_TMO);
cs->BC_Write_Reg(cs, 1, jade_HDLC_MODE, jadeMODE_TMO);
/* Power down, 1-Idle, RxTx least significant bit first */
cs->BC_Write_Reg(cs, 0, jade_HDLC_CCR0, 0x00);
cs->BC_Write_Reg(cs, 1, jade_HDLC_CCR0, 0x00);
/* Mask all interrupts */
cs->BC_Write_Reg(cs, 0, jade_HDLC_IMR, 0x00);
cs->BC_Write_Reg(cs, 1, jade_HDLC_IMR, 0x00);
/* Setup host access to hdlc controller */
jade_write_indirect(cs, jade_HDLCCNTRACCESS, (jadeINDIRECT_HAH1 | jadeINDIRECT_HAH2));
/* Unmask HDLC int (don't forget DSP int later on)*/
cs->BC_Write_Reg(cs, -1, jade_INT, (jadeINT_HDLC1 | jadeINT_HDLC2));
/* once again TRANSPARENT */
modejade(cs->bcs, 0, 0);
modejade(cs->bcs + 1, 0, 0);
}