2016-09-22 02:16:45 +08:00
|
|
|
Bug hunting
|
2016-11-08 03:03:19 +08:00
|
|
|
===========
|
|
|
|
|
|
|
|
|
|
Kernel bug reports often come with a stack dump like the one below::
|
|
|
|
|
|
|
|
|
|
------------[ cut here ]------------
|
|
|
|
|
WARNING: CPU: 1 PID: 28102 at kernel/module.c:1108 module_put+0x57/0x70
|
|
|
|
|
Modules linked in: dvb_usb_gp8psk(-) dvb_usb dvb_core nvidia_drm(PO) nvidia_modeset(PO) snd_hda_codec_hdmi snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd soundcore nvidia(PO) [last unloaded: rc_core]
|
|
|
|
|
CPU: 1 PID: 28102 Comm: rmmod Tainted: P WC O 4.8.4-build.1 #1
|
|
|
|
|
Hardware name: MSI MS-7309/MS-7309, BIOS V1.12 02/23/2009
|
|
|
|
|
00000000 c12ba080 00000000 00000000 c103ed6a c1616014 00000001 00006dc6
|
|
|
|
|
c1615862 00000454 c109e8a7 c109e8a7 00000009 ffffffff 00000000 f13f6a10
|
|
|
|
|
f5f5a600 c103ee33 00000009 00000000 00000000 c109e8a7 f80ca4d0 c109f617
|
|
|
|
|
Call Trace:
|
|
|
|
|
[<c12ba080>] ? dump_stack+0x44/0x64
|
|
|
|
|
[<c103ed6a>] ? __warn+0xfa/0x120
|
|
|
|
|
[<c109e8a7>] ? module_put+0x57/0x70
|
|
|
|
|
[<c109e8a7>] ? module_put+0x57/0x70
|
|
|
|
|
[<c103ee33>] ? warn_slowpath_null+0x23/0x30
|
|
|
|
|
[<c109e8a7>] ? module_put+0x57/0x70
|
|
|
|
|
[<f80ca4d0>] ? gp8psk_fe_set_frontend+0x460/0x460 [dvb_usb_gp8psk]
|
|
|
|
|
[<c109f617>] ? symbol_put_addr+0x27/0x50
|
|
|
|
|
[<f80bc9ca>] ? dvb_usb_adapter_frontend_exit+0x3a/0x70 [dvb_usb]
|
|
|
|
|
[<f80bb3bf>] ? dvb_usb_exit+0x2f/0xd0 [dvb_usb]
|
|
|
|
|
[<c13d03bc>] ? usb_disable_endpoint+0x7c/0xb0
|
|
|
|
|
[<f80bb48a>] ? dvb_usb_device_exit+0x2a/0x50 [dvb_usb]
|
|
|
|
|
[<c13d2882>] ? usb_unbind_interface+0x62/0x250
|
|
|
|
|
[<c136b514>] ? __pm_runtime_idle+0x44/0x70
|
|
|
|
|
[<c13620d8>] ? __device_release_driver+0x78/0x120
|
|
|
|
|
[<c1362907>] ? driver_detach+0x87/0x90
|
|
|
|
|
[<c1361c48>] ? bus_remove_driver+0x38/0x90
|
|
|
|
|
[<c13d1c18>] ? usb_deregister+0x58/0xb0
|
|
|
|
|
[<c109fbb0>] ? SyS_delete_module+0x130/0x1f0
|
|
|
|
|
[<c1055654>] ? task_work_run+0x64/0x80
|
|
|
|
|
[<c1000fa5>] ? exit_to_usermode_loop+0x85/0x90
|
|
|
|
|
[<c10013f0>] ? do_fast_syscall_32+0x80/0x130
|
|
|
|
|
[<c1549f43>] ? sysenter_past_esp+0x40/0x6a
|
|
|
|
|
---[ end trace 6ebc60ef3981792f ]---
|
|
|
|
|
|
|
|
|
|
Such stack traces provide enough information to identify the line inside the
|
|
|
|
|
Kernel's source code where the bug happened. Depending on the severity of
|
|
|
|
|
the issue, it may also contain the word **Oops**, as on this one::
|
|
|
|
|
|
|
|
|
|
BUG: unable to handle kernel NULL pointer dereference at (null)
|
|
|
|
|
IP: [<c06969d4>] iret_exc+0x7d0/0xa59
|
|
|
|
|
*pdpt = 000000002258a001 *pde = 0000000000000000
|
|
|
|
|
Oops: 0002 [#1] PREEMPT SMP
|
|
|
|
|
...
|
|
|
|
|
|
|
|
|
|
Despite being an **Oops** or some other sort of stack trace, the offended
|
|
|
|
|
line is usually required to identify and handle the bug. Along this chapter,
|
|
|
|
|
we'll refer to "Oops" for all kinds of stack traces that need to be analized.
|
2006-03-22 07:37:42 +08:00
|
|
|
|
2016-09-22 02:16:45 +08:00
|
|
|
.. note::
|
|
|
|
|
|
2016-11-08 03:03:19 +08:00
|
|
|
``ksymoops`` is useless on 2.6 or upper. Please use the Oops in its original
|
|
|
|
|
format (from ``dmesg``, etc). Ignore any references in this or other docs to
|
|
|
|
|
"decoding the Oops" or "running it through ksymoops".
|
|
|
|
|
If you post an Oops from 2.6+ that has been run through ``ksymoops``,
|
|
|
|
|
people will just tell you to repost it.
|
|
|
|
|
|
|
|
|
|
Where is the Oops message is located?
|
|
|
|
|
-------------------------------------
|
|
|
|
|
|
|
|
|
|
Normally the Oops text is read from the kernel buffers by klogd and
|
|
|
|
|
handed to ``syslogd`` which writes it to a syslog file, typically
|
|
|
|
|
``/var/log/messages`` (depends on ``/etc/syslog.conf``). On systems with
|
|
|
|
|
systemd, it may also be stored by the ``journald`` daemon, and accessed
|
|
|
|
|
by running ``journalctl`` command.
|
|
|
|
|
|
|
|
|
|
Sometimes ``klogd`` dies, in which case you can run ``dmesg > file`` to
|
|
|
|
|
read the data from the kernel buffers and save it. Or you can
|
|
|
|
|
``cat /proc/kmsg > file``, however you have to break in to stop the transfer,
|
|
|
|
|
``kmsg`` is a "never ending file".
|
|
|
|
|
|
|
|
|
|
If the machine has crashed so badly that you cannot enter commands or
|
|
|
|
|
the disk is not available then you have three options:
|
|
|
|
|
|
|
|
|
|
(1) Hand copy the text from the screen and type it in after the machine
|
|
|
|
|
has restarted. Messy but it is the only option if you have not
|
|
|
|
|
planned for a crash. Alternatively, you can take a picture of
|
|
|
|
|
the screen with a digital camera - not nice, but better than
|
|
|
|
|
nothing. If the messages scroll off the top of the console, you
|
|
|
|
|
may find that booting with a higher resolution (eg, ``vga=791``)
|
|
|
|
|
will allow you to read more of the text. (Caveat: This needs ``vesafb``,
|
|
|
|
|
so won't help for 'early' oopses)
|
|
|
|
|
|
|
|
|
|
(2) Boot with a serial console (see
|
|
|
|
|
:ref:`Documentation/admin-guide/serial-console.rst <serial_console>`),
|
|
|
|
|
run a null modem to a second machine and capture the output there
|
|
|
|
|
using your favourite communication program. Minicom works well.
|
|
|
|
|
|
|
|
|
|
(3) Use Kdump (see Documentation/kdump/kdump.txt),
|
|
|
|
|
extract the kernel ring buffer from old memory with using dmesg
|
|
|
|
|
gdbmacro in Documentation/kdump/gdbmacros.txt.
|
|
|
|
|
|
|
|
|
|
Finding the bug's location
|
|
|
|
|
--------------------------
|
|
|
|
|
|
|
|
|
|
Reporting a bug works best if you point the location of the bug at the
|
|
|
|
|
Kernel source file. There are two methods for doing that. Usually, using
|
|
|
|
|
``gdb`` is easier, but the Kernel should be pre-compiled with debug info.
|
2006-03-22 07:37:42 +08:00
|
|
|
|
2016-11-08 03:03:16 +08:00
|
|
|
gdb
|
2016-11-08 03:03:19 +08:00
|
|
|
^^^
|
2016-11-08 03:03:16 +08:00
|
|
|
|
2016-11-08 03:03:19 +08:00
|
|
|
The GNU debug (``gdb``) is the best way to figure out the exact file and line
|
2016-11-08 03:03:16 +08:00
|
|
|
number of the OOPS from the ``vmlinux`` file.
|
|
|
|
|
|
2016-11-08 03:03:19 +08:00
|
|
|
The usage of gdb works best on a kernel compiled with ``CONFIG_DEBUG_INFO``.
|
2016-11-08 03:03:16 +08:00
|
|
|
This can be set by running::
|
|
|
|
|
|
|
|
|
|
$ ./scripts/config -d COMPILE_TEST -e DEBUG_KERNEL -e DEBUG_INFO
|
|
|
|
|
|
|
|
|
|
On a kernel compiled with ``CONFIG_DEBUG_INFO``, you can simply copy the
|
|
|
|
|
EIP value from the OOPS::
|
2007-06-01 15:46:50 +08:00
|
|
|
|
|
|
|
|
EIP: 0060:[<c021e50e>] Not tainted VLI
|
|
|
|
|
|
2016-09-22 02:16:45 +08:00
|
|
|
And use GDB to translate that to human-readable form::
|
2007-06-01 15:46:50 +08:00
|
|
|
|
2016-11-08 03:03:16 +08:00
|
|
|
$ gdb vmlinux
|
2007-06-01 15:46:50 +08:00
|
|
|
(gdb) l *0xc021e50e
|
|
|
|
|
|
2016-09-22 02:16:45 +08:00
|
|
|
If you don't have ``CONFIG_DEBUG_INFO`` enabled, you use the function
|
|
|
|
|
offset from the OOPS::
|
2007-06-01 15:46:50 +08:00
|
|
|
|
|
|
|
|
EIP is at vt_ioctl+0xda8/0x1482
|
|
|
|
|
|
2016-09-22 02:16:45 +08:00
|
|
|
And recompile the kernel with ``CONFIG_DEBUG_INFO`` enabled::
|
2007-06-01 15:46:50 +08:00
|
|
|
|
2016-11-08 03:03:19 +08:00
|
|
|
$ ./scripts/config -d COMPILE_TEST -e DEBUG_KERNEL -e DEBUG_INFO
|
2016-11-08 03:03:16 +08:00
|
|
|
$ make vmlinux
|
|
|
|
|
$ gdb vmlinux
|
|
|
|
|
(gdb) l *vt_ioctl+0xda8
|
|
|
|
|
0x1888 is in vt_ioctl (drivers/tty/vt/vt_ioctl.c:293).
|
|
|
|
|
288 {
|
|
|
|
|
289 struct vc_data *vc = NULL;
|
|
|
|
|
290 int ret = 0;
|
|
|
|
|
291
|
|
|
|
|
292 console_lock();
|
|
|
|
|
293 if (VT_BUSY(vc_num))
|
|
|
|
|
294 ret = -EBUSY;
|
|
|
|
|
295 else if (vc_num)
|
|
|
|
|
296 vc = vc_deallocate(vc_num);
|
|
|
|
|
297 console_unlock();
|
|
|
|
|
|
|
|
|
|
or, if you want to be more verbose::
|
|
|
|
|
|
2007-06-01 15:46:50 +08:00
|
|
|
(gdb) p vt_ioctl
|
2016-11-08 03:03:16 +08:00
|
|
|
$1 = {int (struct tty_struct *, unsigned int, unsigned long)} 0xae0 <vt_ioctl>
|
|
|
|
|
(gdb) l *0xae0+0xda8
|
2016-09-22 02:16:45 +08:00
|
|
|
|
2016-11-08 03:03:16 +08:00
|
|
|
You could, instead, use the object file::
|
2016-09-22 02:16:45 +08:00
|
|
|
|
2016-11-08 03:03:16 +08:00
|
|
|
$ make drivers/tty/
|
|
|
|
|
$ gdb drivers/tty/vt/vt_ioctl.o
|
|
|
|
|
(gdb) l *vt_ioctl+0xda8
|
2008-02-06 17:38:01 +08:00
|
|
|
|
2016-09-22 02:16:45 +08:00
|
|
|
If you have a call trace, such as::
|
|
|
|
|
|
|
|
|
|
Call Trace:
|
|
|
|
|
[<ffffffff8802c8e9>] :jbd:log_wait_commit+0xa3/0xf5
|
|
|
|
|
[<ffffffff810482d9>] autoremove_wake_function+0x0/0x2e
|
|
|
|
|
[<ffffffff8802770b>] :jbd:journal_stop+0x1be/0x1ee
|
|
|
|
|
...
|
|
|
|
|
|
2016-11-08 03:03:16 +08:00
|
|
|
this shows the problem likely in the :jbd: module. You can load that module
|
|
|
|
|
in gdb and list the relevant code::
|
2008-02-06 17:38:01 +08:00
|
|
|
|
2016-11-08 03:03:16 +08:00
|
|
|
$ gdb fs/jbd/jbd.ko
|
|
|
|
|
(gdb) l *log_wait_commit+0xa3
|
2007-06-01 15:46:50 +08:00
|
|
|
|
2016-11-08 03:03:19 +08:00
|
|
|
.. note::
|
|
|
|
|
|
|
|
|
|
You can also do the same for any function call at the stack trace,
|
|
|
|
|
like this one::
|
|
|
|
|
|
|
|
|
|
[<f80bc9ca>] ? dvb_usb_adapter_frontend_exit+0x3a/0x70 [dvb_usb]
|
|
|
|
|
|
|
|
|
|
The position where the above call happened can be seen with::
|
|
|
|
|
|
|
|
|
|
$ gdb drivers/media/usb/dvb-usb/dvb-usb.o
|
|
|
|
|
(gdb) l *dvb_usb_adapter_frontend_exit+0x3a
|
|
|
|
|
|
|
|
|
|
objdump
|
|
|
|
|
^^^^^^^
|
|
|
|
|
|
|
|
|
|
To debug a kernel, use objdump and look for the hex offset from the crash
|
|
|
|
|
output to find the valid line of code/assembler. Without debug symbols, you
|
|
|
|
|
will see the assembler code for the routine shown, but if your kernel has
|
|
|
|
|
debug symbols the C code will also be available. (Debug symbols can be enabled
|
|
|
|
|
in the kernel hacking menu of the menu configuration.) For example::
|
|
|
|
|
|
|
|
|
|
$ objdump -r -S -l --disassemble net/dccp/ipv4.o
|
|
|
|
|
|
|
|
|
|
.. note::
|
2006-03-22 07:37:42 +08:00
|
|
|
|
2016-11-08 03:03:19 +08:00
|
|
|
You need to be at the top level of the kernel tree for this to pick up
|
|
|
|
|
your C files.
|
|
|
|
|
|
|
|
|
|
If you don't have access to the code you can also debug on some crash dumps
|
|
|
|
|
e.g. crash dump output as shown by Dave Miller::
|
|
|
|
|
|
|
|
|
|
EIP is at +0x14/0x4c0
|
|
|
|
|
...
|
|
|
|
|
Code: 44 24 04 e8 6f 05 00 00 e9 e8 fe ff ff 8d 76 00 8d bc 27 00 00
|
|
|
|
|
00 00 55 57 56 53 81 ec bc 00 00 00 8b ac 24 d0 00 00 00 8b 5d 08
|
|
|
|
|
<8b> 83 3c 01 00 00 89 44 24 14 8b 45 28 85 c0 89 44 24 18 0f 85
|
|
|
|
|
|
|
|
|
|
Put the bytes into a "foo.s" file like this:
|
|
|
|
|
|
|
|
|
|
.text
|
|
|
|
|
.globl foo
|
|
|
|
|
foo:
|
|
|
|
|
.byte .... /* bytes from Code: part of OOPS dump */
|
|
|
|
|
|
|
|
|
|
Compile it with "gcc -c -o foo.o foo.s" then look at the output of
|
|
|
|
|
"objdump --disassemble foo.o".
|
|
|
|
|
|
|
|
|
|
Output:
|
|
|
|
|
|
|
|
|
|
ip_queue_xmit:
|
|
|
|
|
push %ebp
|
|
|
|
|
push %edi
|
|
|
|
|
push %esi
|
|
|
|
|
push %ebx
|
|
|
|
|
sub $0xbc, %esp
|
|
|
|
|
mov 0xd0(%esp), %ebp ! %ebp = arg0 (skb)
|
|
|
|
|
mov 0x8(%ebp), %ebx ! %ebx = skb->sk
|
|
|
|
|
mov 0x13c(%ebx), %eax ! %eax = inet_sk(sk)->opt
|
|
|
|
|
|
|
|
|
|
Reporting the bug
|
|
|
|
|
-----------------
|
|
|
|
|
|
|
|
|
|
Once you find where the bug happened, by inspecting its location,
|
|
|
|
|
you could either try to fix it yourself or report it upstream.
|
|
|
|
|
|
|
|
|
|
In order to report it upstream, you should identify the mailing list
|
|
|
|
|
used for the development of the affected code. This can be done by using
|
|
|
|
|
the ``get_maintainer.pl`` script.
|
|
|
|
|
|
|
|
|
|
For example, if you find a bug at the gspca's conex.c file, you can get
|
|
|
|
|
their maintainers with::
|
|
|
|
|
|
|
|
|
|
$ ./scripts/get_maintainer.pl -f drivers/media/usb/gspca/sonixj.c
|
|
|
|
|
Hans Verkuil <hverkuil@xs4all.nl> (odd fixer:GSPCA USB WEBCAM DRIVER,commit_signer:1/1=100%)
|
|
|
|
|
Mauro Carvalho Chehab <mchehab@kernel.org> (maintainer:MEDIA INPUT INFRASTRUCTURE (V4L/DVB),commit_signer:1/1=100%)
|
|
|
|
|
Tejun Heo <tj@kernel.org> (commit_signer:1/1=100%)
|
|
|
|
|
Bhaktipriya Shridhar <bhaktipriya96@gmail.com> (commit_signer:1/1=100%,authored:1/1=100%,added_lines:4/4=100%,removed_lines:9/9=100%)
|
|
|
|
|
linux-media@vger.kernel.org (open list:GSPCA USB WEBCAM DRIVER)
|
|
|
|
|
linux-kernel@vger.kernel.org (open list)
|
|
|
|
|
|
|
|
|
|
Please notice that it will point to:
|
|
|
|
|
|
|
|
|
|
- The last developers that touched on the source code. On the above example,
|
|
|
|
|
Tejun and Bhaktipriya (in this specific case, none really envolved on the
|
|
|
|
|
development of this file);
|
|
|
|
|
- The driver maintainer (Hans Verkuil);
|
|
|
|
|
- The subsystem maintainer (Mauro Carvalho Chehab)
|
|
|
|
|
- The driver and/or subsystem mailing list (linux-media@vger.kernel.org);
|
|
|
|
|
- the Linux Kernel mailing list (linux-kernel@vger.kernel.org).
|
|
|
|
|
|
|
|
|
|
Usually, the fastest way to have your bug fixed is to report it to mailing
|
|
|
|
|
list used for the development of the code (linux-media ML) copying the driver maintainer (Hans).
|
|
|
|
|
|
|
|
|
|
If you are totally stumped as to whom to send the report, and
|
|
|
|
|
``get_maintainer.pl`` didn't provide you anything useful, send it to
|
|
|
|
|
linux-kernel@vger.kernel.org.
|
|
|
|
|
|
|
|
|
|
Thanks for your help in making Linux as stable as humanly possible.
|
|
|
|
|
|
|
|
|
|
Fixing the bug
|
|
|
|
|
--------------
|
|
|
|
|
|
|
|
|
|
If you know programming, you could help us by not only reporting the bug,
|
|
|
|
|
but also providing us with a solution. After all open source is about
|
|
|
|
|
sharing what you do and don't you want to be recognised for your genius?
|
|
|
|
|
|
|
|
|
|
If you decide to take this way, once you have worked out a fix please submit
|
|
|
|
|
it upstream.
|
2006-03-22 07:37:42 +08:00
|
|
|
|
2016-10-18 20:12:27 +08:00
|
|
|
Please do read
|
|
|
|
|
ref:`Documentation/process/submitting-patches.rst <submittingpatches>` though
|
|
|
|
|
to help your code get accepted.
|
2016-11-08 03:03:19 +08:00
|
|
|
|
|
|
|
|
|
|
|
|
|
---------------------------------------------------------------------------
|
|
|
|
|
|
|
|
|
|
Notes on Oops tracing with ``klogd``
|
|
|
|
|
------------------------------------
|
|
|
|
|
|
|
|
|
|
In order to help Linus and the other kernel developers there has been
|
|
|
|
|
substantial support incorporated into ``klogd`` for processing protection
|
|
|
|
|
faults. In order to have full support for address resolution at least
|
|
|
|
|
version 1.3-pl3 of the ``sysklogd`` package should be used.
|
|
|
|
|
|
|
|
|
|
When a protection fault occurs the ``klogd`` daemon automatically
|
|
|
|
|
translates important addresses in the kernel log messages to their
|
|
|
|
|
symbolic equivalents. This translated kernel message is then
|
|
|
|
|
forwarded through whatever reporting mechanism ``klogd`` is using. The
|
|
|
|
|
protection fault message can be simply cut out of the message files
|
|
|
|
|
and forwarded to the kernel developers.
|
|
|
|
|
|
|
|
|
|
Two types of address resolution are performed by ``klogd``. The first is
|
|
|
|
|
static translation and the second is dynamic translation. Static
|
|
|
|
|
translation uses the System.map file in much the same manner that
|
|
|
|
|
ksymoops does. In order to do static translation the ``klogd`` daemon
|
|
|
|
|
must be able to find a system map file at daemon initialization time.
|
|
|
|
|
See the klogd man page for information on how ``klogd`` searches for map
|
|
|
|
|
files.
|
|
|
|
|
|
|
|
|
|
Dynamic address translation is important when kernel loadable modules
|
|
|
|
|
are being used. Since memory for kernel modules is allocated from the
|
|
|
|
|
kernel's dynamic memory pools there are no fixed locations for either
|
|
|
|
|
the start of the module or for functions and symbols in the module.
|
|
|
|
|
|
|
|
|
|
The kernel supports system calls which allow a program to determine
|
|
|
|
|
which modules are loaded and their location in memory. Using these
|
|
|
|
|
system calls the klogd daemon builds a symbol table which can be used
|
|
|
|
|
to debug a protection fault which occurs in a loadable kernel module.
|
|
|
|
|
|
|
|
|
|
At the very minimum klogd will provide the name of the module which
|
|
|
|
|
generated the protection fault. There may be additional symbolic
|
|
|
|
|
information available if the developer of the loadable module chose to
|
|
|
|
|
export symbol information from the module.
|
|
|
|
|
|
|
|
|
|
Since the kernel module environment can be dynamic there must be a
|
|
|
|
|
mechanism for notifying the ``klogd`` daemon when a change in module
|
|
|
|
|
environment occurs. There are command line options available which
|
|
|
|
|
allow klogd to signal the currently executing daemon that symbol
|
|
|
|
|
information should be refreshed. See the ``klogd`` manual page for more
|
|
|
|
|
information.
|
|
|
|
|
|
|
|
|
|
A patch is included with the sysklogd distribution which modifies the
|
|
|
|
|
``modules-2.0.0`` package to automatically signal klogd whenever a module
|
|
|
|
|
is loaded or unloaded. Applying this patch provides essentially
|
|
|
|
|
seamless support for debugging protection faults which occur with
|
|
|
|
|
kernel loadable modules.
|
|
|
|
|
|
|
|
|
|
The following is an example of a protection fault in a loadable module
|
|
|
|
|
processed by ``klogd``::
|
|
|
|
|
|
|
|
|
|
Aug 29 09:51:01 blizard kernel: Unable to handle kernel paging request at virtual address f15e97cc
|
|
|
|
|
Aug 29 09:51:01 blizard kernel: current->tss.cr3 = 0062d000, %cr3 = 0062d000
|
|
|
|
|
Aug 29 09:51:01 blizard kernel: *pde = 00000000
|
|
|
|
|
Aug 29 09:51:01 blizard kernel: Oops: 0002
|
|
|
|
|
Aug 29 09:51:01 blizard kernel: CPU: 0
|
|
|
|
|
Aug 29 09:51:01 blizard kernel: EIP: 0010:[oops:_oops+16/3868]
|
|
|
|
|
Aug 29 09:51:01 blizard kernel: EFLAGS: 00010212
|
|
|
|
|
Aug 29 09:51:01 blizard kernel: eax: 315e97cc ebx: 003a6f80 ecx: 001be77b edx: 00237c0c
|
|
|
|
|
Aug 29 09:51:01 blizard kernel: esi: 00000000 edi: bffffdb3 ebp: 00589f90 esp: 00589f8c
|
|
|
|
|
Aug 29 09:51:01 blizard kernel: ds: 0018 es: 0018 fs: 002b gs: 002b ss: 0018
|
|
|
|
|
Aug 29 09:51:01 blizard kernel: Process oops_test (pid: 3374, process nr: 21, stackpage=00589000)
|
|
|
|
|
Aug 29 09:51:01 blizard kernel: Stack: 315e97cc 00589f98 0100b0b4 bffffed4 0012e38e 00240c64 003a6f80 00000001
|
|
|
|
|
Aug 29 09:51:01 blizard kernel: 00000000 00237810 bfffff00 0010a7fa 00000003 00000001 00000000 bfffff00
|
|
|
|
|
Aug 29 09:51:01 blizard kernel: bffffdb3 bffffed4 ffffffda 0000002b 0007002b 0000002b 0000002b 00000036
|
|
|
|
|
Aug 29 09:51:01 blizard kernel: Call Trace: [oops:_oops_ioctl+48/80] [_sys_ioctl+254/272] [_system_call+82/128]
|
|
|
|
|
Aug 29 09:51:01 blizard kernel: Code: c7 00 05 00 00 00 eb 08 90 90 90 90 90 90 90 90 89 ec 5d c3
|
|
|
|
|
|
|
|
|
|
---------------------------------------------------------------------------
|
|
|
|
|
|
|
|
|
|
::
|
|
|
|
|
|
|
|
|
|
Dr. G.W. Wettstein Oncology Research Div. Computing Facility
|
|
|
|
|
Roger Maris Cancer Center INTERNET: greg@wind.rmcc.com
|
|
|
|
|
820 4th St. N.
|
|
|
|
|
Fargo, ND 58122
|
|
|
|
|
Phone: 701-234-7556
|
