linux-sg2042/drivers/media/dvb-frontends/m88ds3103.c

1516 lines
33 KiB
C
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157 Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-27 14:55:06 +08:00
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Montage Technology M88DS3103/M88RS6000 demodulator driver
*
* Copyright (C) 2013 Antti Palosaari <crope@iki.fi>
*/
#include "m88ds3103_priv.h"
static const struct dvb_frontend_ops m88ds3103_ops;
/* write single register with mask */
static int m88ds3103_update_bits(struct m88ds3103_dev *dev,
u8 reg, u8 mask, u8 val)
{
int ret;
u8 tmp;
/* no need for read if whole reg is written */
if (mask != 0xff) {
ret = regmap_bulk_read(dev->regmap, reg, &tmp, 1);
if (ret)
return ret;
val &= mask;
tmp &= ~mask;
val |= tmp;
}
return regmap_bulk_write(dev->regmap, reg, &val, 1);
}
/* write reg val table using reg addr auto increment */
static int m88ds3103_wr_reg_val_tab(struct m88ds3103_dev *dev,
const struct m88ds3103_reg_val *tab, int tab_len)
{
struct i2c_client *client = dev->client;
int ret, i, j;
u8 buf[83];
dev_dbg(&client->dev, "tab_len=%d\n", tab_len);
if (tab_len > 86) {
ret = -EINVAL;
goto err;
}
for (i = 0, j = 0; i < tab_len; i++, j++) {
buf[j] = tab[i].val;
if (i == tab_len - 1 || tab[i].reg != tab[i + 1].reg - 1 ||
!((j + 1) % (dev->cfg->i2c_wr_max - 1))) {
ret = regmap_bulk_write(dev->regmap, tab[i].reg - j, buf, j + 1);
if (ret)
goto err;
j = -1;
}
}
return 0;
err:
dev_dbg(&client->dev, "failed=%d\n", ret);
return ret;
}
[media] TS2020: Calculate tuner gain correctly The TS2020 and TS2022 tuners take an input from the demodulator indicating the AGC setting on that component that is then used to influence the tuner's own gain. This should be taken into account when calculating the gain and signal strength. Further, the existing TS2020 driver miscalculates the signal strength as the result of its calculations can exceed the storage capacity of the 16-bit word used to return it to userspace. To this end: (1) Add a callback function (->get_agc_pwm()) in the ts2020_config struct that the tuner can call to get the AGC PWM value from the demodulator. (2) Modify the TS2020 driver to calculate the gain according to Montage's specification with the adjustment that we produce a negative value and scale it to 0.001dB units (which is what the DVBv5 API will require): (a) Callback to the demodulator to retrieve the AGC PWM value and then turn that into Vagc for incorporation in the calculations. If the callback is unset, assume a Vagc of 0. (b) Calculate the tuner gain from a combination of Vagc and the tuner's RF gain and baseband gain settings. (3) Turn this into a percentage signal strength as per Montage's specification for return to userspace with the DVBv3 API. (4) Provide a function in the M88DS3103 demodulator driver that can be used to get the AGC PWM value on behalf of the tuner. (5) The ts2020_config.get_agc_pwm function should be set by the code that stitches together the drivers for each card. For the DVBSky cards that use the M88DS3103 with the TS2020 or the TS2022, set the get_agc_pwm function to point to m88ds3103_get_agc_pwm. I have tested this with a DVBSky S952 card which has an M88DS3103 and a TS2022. Thanks to Montage for providing access to information about the workings of these parts. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-26 23:04:00 +08:00
/*
* Get the demodulator AGC PWM voltage setting supplied to the tuner.
*/
int m88ds3103_get_agc_pwm(struct dvb_frontend *fe, u8 *_agc_pwm)
{
struct m88ds3103_dev *dev = fe->demodulator_priv;
unsigned tmp;
int ret;
ret = regmap_read(dev->regmap, 0x3f, &tmp);
if (ret == 0)
*_agc_pwm = tmp;
return ret;
}
EXPORT_SYMBOL(m88ds3103_get_agc_pwm);
static int m88ds3103_read_status(struct dvb_frontend *fe,
enum fe_status *status)
{
struct m88ds3103_dev *dev = fe->demodulator_priv;
struct i2c_client *client = dev->client;
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
int ret, i, itmp;
unsigned int utmp;
u8 buf[3];
*status = 0;
if (!dev->warm) {
ret = -EAGAIN;
goto err;
}
switch (c->delivery_system) {
case SYS_DVBS:
ret = regmap_read(dev->regmap, 0xd1, &utmp);
if (ret)
goto err;
if ((utmp & 0x07) == 0x07)
*status = FE_HAS_SIGNAL | FE_HAS_CARRIER |
FE_HAS_VITERBI | FE_HAS_SYNC |
FE_HAS_LOCK;
break;
case SYS_DVBS2:
ret = regmap_read(dev->regmap, 0x0d, &utmp);
if (ret)
goto err;
if ((utmp & 0x8f) == 0x8f)
*status = FE_HAS_SIGNAL | FE_HAS_CARRIER |
FE_HAS_VITERBI | FE_HAS_SYNC |
FE_HAS_LOCK;
break;
default:
dev_dbg(&client->dev, "invalid delivery_system\n");
ret = -EINVAL;
goto err;
}
dev->fe_status = *status;
dev_dbg(&client->dev, "lock=%02x status=%02x\n", utmp, *status);
/* CNR */
if (dev->fe_status & FE_HAS_VITERBI) {
unsigned int cnr, noise, signal, noise_tot, signal_tot;
cnr = 0;
/* more iterations for more accurate estimation */
#define M88DS3103_SNR_ITERATIONS 3
switch (c->delivery_system) {
case SYS_DVBS:
itmp = 0;
for (i = 0; i < M88DS3103_SNR_ITERATIONS; i++) {
ret = regmap_read(dev->regmap, 0xff, &utmp);
if (ret)
goto err;
itmp += utmp;
}
/* use of single register limits max value to 15 dB */
/* SNR(X) dB = 10 * ln(X) / ln(10) dB */
itmp = DIV_ROUND_CLOSEST(itmp, 8 * M88DS3103_SNR_ITERATIONS);
if (itmp)
cnr = div_u64((u64) 10000 * intlog2(itmp), intlog2(10));
break;
case SYS_DVBS2:
noise_tot = 0;
signal_tot = 0;
for (i = 0; i < M88DS3103_SNR_ITERATIONS; i++) {
ret = regmap_bulk_read(dev->regmap, 0x8c, buf, 3);
if (ret)
goto err;
noise = buf[1] << 6; /* [13:6] */
noise |= buf[0] & 0x3f; /* [5:0] */
noise >>= 2;
signal = buf[2] * buf[2];
signal >>= 1;
noise_tot += noise;
signal_tot += signal;
}
noise = noise_tot / M88DS3103_SNR_ITERATIONS;
signal = signal_tot / M88DS3103_SNR_ITERATIONS;
/* SNR(X) dB = 10 * log10(X) dB */
if (signal > noise) {
itmp = signal / noise;
cnr = div_u64((u64) 10000 * intlog10(itmp), (1 << 24));
}
break;
default:
dev_dbg(&client->dev, "invalid delivery_system\n");
ret = -EINVAL;
goto err;
}
if (cnr) {
c->cnr.stat[0].scale = FE_SCALE_DECIBEL;
c->cnr.stat[0].svalue = cnr;
} else {
c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
}
} else {
c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
}
/* BER */
if (dev->fe_status & FE_HAS_LOCK) {
unsigned int utmp, post_bit_error, post_bit_count;
switch (c->delivery_system) {
case SYS_DVBS:
ret = regmap_write(dev->regmap, 0xf9, 0x04);
if (ret)
goto err;
ret = regmap_read(dev->regmap, 0xf8, &utmp);
if (ret)
goto err;
/* measurement ready? */
if (!(utmp & 0x10)) {
ret = regmap_bulk_read(dev->regmap, 0xf6, buf, 2);
if (ret)
goto err;
post_bit_error = buf[1] << 8 | buf[0] << 0;
post_bit_count = 0x800000;
dev->post_bit_error += post_bit_error;
dev->post_bit_count += post_bit_count;
dev->dvbv3_ber = post_bit_error;
/* restart measurement */
utmp |= 0x10;
ret = regmap_write(dev->regmap, 0xf8, utmp);
if (ret)
goto err;
}
break;
case SYS_DVBS2:
ret = regmap_bulk_read(dev->regmap, 0xd5, buf, 3);
if (ret)
goto err;
utmp = buf[2] << 16 | buf[1] << 8 | buf[0] << 0;
/* enough data? */
if (utmp > 4000) {
ret = regmap_bulk_read(dev->regmap, 0xf7, buf, 2);
if (ret)
goto err;
post_bit_error = buf[1] << 8 | buf[0] << 0;
post_bit_count = 32 * utmp; /* TODO: FEC */
dev->post_bit_error += post_bit_error;
dev->post_bit_count += post_bit_count;
dev->dvbv3_ber = post_bit_error;
/* restart measurement */
ret = regmap_write(dev->regmap, 0xd1, 0x01);
if (ret)
goto err;
ret = regmap_write(dev->regmap, 0xf9, 0x01);
if (ret)
goto err;
ret = regmap_write(dev->regmap, 0xf9, 0x00);
if (ret)
goto err;
ret = regmap_write(dev->regmap, 0xd1, 0x00);
if (ret)
goto err;
}
break;
default:
dev_dbg(&client->dev, "invalid delivery_system\n");
ret = -EINVAL;
goto err;
}
c->post_bit_error.stat[0].scale = FE_SCALE_COUNTER;
c->post_bit_error.stat[0].uvalue = dev->post_bit_error;
c->post_bit_count.stat[0].scale = FE_SCALE_COUNTER;
c->post_bit_count.stat[0].uvalue = dev->post_bit_count;
} else {
c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
c->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
}
return 0;
err:
dev_dbg(&client->dev, "failed=%d\n", ret);
return ret;
}
static int m88ds3103_set_frontend(struct dvb_frontend *fe)
{
struct m88ds3103_dev *dev = fe->demodulator_priv;
struct i2c_client *client = dev->client;
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
int ret, len;
const struct m88ds3103_reg_val *init;
u8 u8tmp, u8tmp1 = 0, u8tmp2 = 0; /* silence compiler warning */
u8 buf[3];
u16 u16tmp;
u32 tuner_frequency_khz, target_mclk;
s32 s32tmp;
media: m88ds3103: serialize reset messages in m88ds3103_set_frontend Ref: https://bugzilla.kernel.org/show_bug.cgi?id=199323 Users are experiencing problems with the DVBSky S960/S960C USB devices since the following commit: 9d659ae: ("locking/mutex: Add lock handoff to avoid starvation") The device malfunctions after running for an indeterminable period of time, and the problem can only be cleared by rebooting the machine. It is possible to encourage the problem to surface by blocking the signal to the LNB. Further debugging revealed the cause of the problem. In the following capture: - thread #1325 is running m88ds3103_set_frontend - thread #42 is running ts2020_stat_work a> [1325] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 07 80 [1325] usb 1-1: dvb_usb_v2_generic_io: <<< 08 [42] usb 1-1: dvb_usb_v2_generic_io: >>> 09 01 01 68 3f [42] usb 1-1: dvb_usb_v2_generic_io: <<< 08 ff [42] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 03 11 [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 [42] usb 1-1: dvb_usb_v2_generic_io: >>> 09 01 01 60 3d [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 ff b> [1325] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 07 00 [1325] usb 1-1: dvb_usb_v2_generic_io: <<< 07 [42] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 03 11 [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 [42] usb 1-1: dvb_usb_v2_generic_io: >>> 09 01 01 60 21 [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 ff [42] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 03 11 [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 [42] usb 1-1: dvb_usb_v2_generic_io: >>> 09 01 01 60 66 [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 ff [1325] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 03 11 [1325] usb 1-1: dvb_usb_v2_generic_io: <<< 07 [1325] usb 1-1: dvb_usb_v2_generic_io: >>> 08 60 02 10 0b [1325] usb 1-1: dvb_usb_v2_generic_io: <<< 07 Two i2c messages are sent to perform a reset in m88ds3103_set_frontend: a. 0x07, 0x80 b. 0x07, 0x00 However, as shown in the capture, the regmap mutex is being handed over to another thread (ts2020_stat_work) in between these two messages. >From here, the device responds to every i2c message with an 07 message, and will only return to normal operation following a power cycle. Use regmap_multi_reg_write to group the two reset messages, ensuring both are processed before the regmap mutex is unlocked. Signed-off-by: James Hutchinson <jahutchinson99@googlemail.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-01-14 05:13:47 +08:00
static const struct reg_sequence reset_buf[] = {
{0x07, 0x80}, {0x07, 0x00}
};
dev_dbg(&client->dev,
"delivery_system=%d modulation=%d frequency=%u symbol_rate=%d inversion=%d pilot=%d rolloff=%d\n",
c->delivery_system, c->modulation, c->frequency, c->symbol_rate,
c->inversion, c->pilot, c->rolloff);
if (!dev->warm) {
ret = -EAGAIN;
goto err;
}
/* reset */
media: m88ds3103: serialize reset messages in m88ds3103_set_frontend Ref: https://bugzilla.kernel.org/show_bug.cgi?id=199323 Users are experiencing problems with the DVBSky S960/S960C USB devices since the following commit: 9d659ae: ("locking/mutex: Add lock handoff to avoid starvation") The device malfunctions after running for an indeterminable period of time, and the problem can only be cleared by rebooting the machine. It is possible to encourage the problem to surface by blocking the signal to the LNB. Further debugging revealed the cause of the problem. In the following capture: - thread #1325 is running m88ds3103_set_frontend - thread #42 is running ts2020_stat_work a> [1325] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 07 80 [1325] usb 1-1: dvb_usb_v2_generic_io: <<< 08 [42] usb 1-1: dvb_usb_v2_generic_io: >>> 09 01 01 68 3f [42] usb 1-1: dvb_usb_v2_generic_io: <<< 08 ff [42] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 03 11 [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 [42] usb 1-1: dvb_usb_v2_generic_io: >>> 09 01 01 60 3d [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 ff b> [1325] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 07 00 [1325] usb 1-1: dvb_usb_v2_generic_io: <<< 07 [42] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 03 11 [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 [42] usb 1-1: dvb_usb_v2_generic_io: >>> 09 01 01 60 21 [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 ff [42] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 03 11 [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 [42] usb 1-1: dvb_usb_v2_generic_io: >>> 09 01 01 60 66 [42] usb 1-1: dvb_usb_v2_generic_io: <<< 07 ff [1325] usb 1-1: dvb_usb_v2_generic_io: >>> 08 68 02 03 11 [1325] usb 1-1: dvb_usb_v2_generic_io: <<< 07 [1325] usb 1-1: dvb_usb_v2_generic_io: >>> 08 60 02 10 0b [1325] usb 1-1: dvb_usb_v2_generic_io: <<< 07 Two i2c messages are sent to perform a reset in m88ds3103_set_frontend: a. 0x07, 0x80 b. 0x07, 0x00 However, as shown in the capture, the regmap mutex is being handed over to another thread (ts2020_stat_work) in between these two messages. >From here, the device responds to every i2c message with an 07 message, and will only return to normal operation following a power cycle. Use regmap_multi_reg_write to group the two reset messages, ensuring both are processed before the regmap mutex is unlocked. Signed-off-by: James Hutchinson <jahutchinson99@googlemail.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-01-14 05:13:47 +08:00
ret = regmap_multi_reg_write(dev->regmap, reset_buf, 2);
if (ret)
goto err;
/* Disable demod clock path */
if (dev->chip_id == M88RS6000_CHIP_ID) {
ret = regmap_write(dev->regmap, 0x06, 0xe0);
if (ret)
goto err;
}
/* program tuner */
if (fe->ops.tuner_ops.set_params) {
ret = fe->ops.tuner_ops.set_params(fe);
if (ret)
goto err;
}
if (fe->ops.tuner_ops.get_frequency) {
ret = fe->ops.tuner_ops.get_frequency(fe, &tuner_frequency_khz);
if (ret)
goto err;
} else {
/*
* Use nominal target frequency as tuner driver does not provide
* actual frequency used. Carrier offset calculation is not
* valid.
*/
tuner_frequency_khz = c->frequency;
}
/* select M88RS6000 demod main mclk and ts mclk from tuner die. */
if (dev->chip_id == M88RS6000_CHIP_ID) {
if (c->symbol_rate > 45010000)
dev->mclk = 110250000;
else
dev->mclk = 96000000;
if (c->delivery_system == SYS_DVBS)
target_mclk = 96000000;
else
target_mclk = 144000000;
/* Enable demod clock path */
ret = regmap_write(dev->regmap, 0x06, 0x00);
if (ret)
goto err;
usleep_range(10000, 20000);
} else {
/* set M88DS3103 mclk and ts mclk. */
dev->mclk = 96000000;
switch (dev->cfg->ts_mode) {
case M88DS3103_TS_SERIAL:
case M88DS3103_TS_SERIAL_D7:
target_mclk = dev->cfg->ts_clk;
break;
case M88DS3103_TS_PARALLEL:
case M88DS3103_TS_CI:
if (c->delivery_system == SYS_DVBS)
target_mclk = 96000000;
else {
if (c->symbol_rate < 18000000)
target_mclk = 96000000;
else if (c->symbol_rate < 28000000)
target_mclk = 144000000;
else
target_mclk = 192000000;
}
break;
default:
dev_dbg(&client->dev, "invalid ts_mode\n");
ret = -EINVAL;
goto err;
}
switch (target_mclk) {
case 96000000:
u8tmp1 = 0x02; /* 0b10 */
u8tmp2 = 0x01; /* 0b01 */
break;
case 144000000:
u8tmp1 = 0x00; /* 0b00 */
u8tmp2 = 0x01; /* 0b01 */
break;
case 192000000:
u8tmp1 = 0x03; /* 0b11 */
u8tmp2 = 0x00; /* 0b00 */
break;
}
ret = m88ds3103_update_bits(dev, 0x22, 0xc0, u8tmp1 << 6);
if (ret)
goto err;
ret = m88ds3103_update_bits(dev, 0x24, 0xc0, u8tmp2 << 6);
if (ret)
goto err;
}
ret = regmap_write(dev->regmap, 0xb2, 0x01);
if (ret)
goto err;
ret = regmap_write(dev->regmap, 0x00, 0x01);
if (ret)
goto err;
switch (c->delivery_system) {
case SYS_DVBS:
if (dev->chip_id == M88RS6000_CHIP_ID) {
len = ARRAY_SIZE(m88rs6000_dvbs_init_reg_vals);
init = m88rs6000_dvbs_init_reg_vals;
} else {
len = ARRAY_SIZE(m88ds3103_dvbs_init_reg_vals);
init = m88ds3103_dvbs_init_reg_vals;
}
break;
case SYS_DVBS2:
if (dev->chip_id == M88RS6000_CHIP_ID) {
len = ARRAY_SIZE(m88rs6000_dvbs2_init_reg_vals);
init = m88rs6000_dvbs2_init_reg_vals;
} else {
len = ARRAY_SIZE(m88ds3103_dvbs2_init_reg_vals);
init = m88ds3103_dvbs2_init_reg_vals;
}
break;
default:
dev_dbg(&client->dev, "invalid delivery_system\n");
ret = -EINVAL;
goto err;
}
/* program init table */
if (c->delivery_system != dev->delivery_system) {
ret = m88ds3103_wr_reg_val_tab(dev, init, len);
if (ret)
goto err;
}
if (dev->chip_id == M88RS6000_CHIP_ID) {
if (c->delivery_system == SYS_DVBS2 &&
c->symbol_rate <= 5000000) {
ret = regmap_write(dev->regmap, 0xc0, 0x04);
if (ret)
goto err;
buf[0] = 0x09;
buf[1] = 0x22;
buf[2] = 0x88;
ret = regmap_bulk_write(dev->regmap, 0x8a, buf, 3);
if (ret)
goto err;
}
ret = m88ds3103_update_bits(dev, 0x9d, 0x08, 0x08);
if (ret)
goto err;
ret = regmap_write(dev->regmap, 0xf1, 0x01);
if (ret)
goto err;
ret = m88ds3103_update_bits(dev, 0x30, 0x80, 0x80);
if (ret)
goto err;
}
switch (dev->cfg->ts_mode) {
case M88DS3103_TS_SERIAL:
u8tmp1 = 0x00;
u8tmp = 0x06;
break;
case M88DS3103_TS_SERIAL_D7:
u8tmp1 = 0x20;
u8tmp = 0x06;
break;
case M88DS3103_TS_PARALLEL:
u8tmp = 0x02;
break;
case M88DS3103_TS_CI:
u8tmp = 0x03;
break;
default:
dev_dbg(&client->dev, "invalid ts_mode\n");
ret = -EINVAL;
goto err;
}
if (dev->cfg->ts_clk_pol)
u8tmp |= 0x40;
/* TS mode */
ret = regmap_write(dev->regmap, 0xfd, u8tmp);
if (ret)
goto err;
switch (dev->cfg->ts_mode) {
case M88DS3103_TS_SERIAL:
case M88DS3103_TS_SERIAL_D7:
ret = m88ds3103_update_bits(dev, 0x29, 0x20, u8tmp1);
if (ret)
goto err;
u16tmp = 0;
u8tmp1 = 0x3f;
u8tmp2 = 0x3f;
break;
default:
u16tmp = DIV_ROUND_UP(target_mclk, dev->cfg->ts_clk);
u8tmp1 = u16tmp / 2 - 1;
u8tmp2 = DIV_ROUND_UP(u16tmp, 2) - 1;
}
dev_dbg(&client->dev, "target_mclk=%u ts_clk=%u ts_clk_divide_ratio=%u\n",
target_mclk, dev->cfg->ts_clk, u16tmp);
/* u8tmp1[5:2] => fe[3:0], u8tmp1[1:0] => ea[7:6] */
/* u8tmp2[5:0] => ea[5:0] */
u8tmp = (u8tmp1 >> 2) & 0x0f;
ret = regmap_update_bits(dev->regmap, 0xfe, 0x0f, u8tmp);
if (ret)
goto err;
u8tmp = ((u8tmp1 & 0x03) << 6) | u8tmp2 >> 0;
ret = regmap_write(dev->regmap, 0xea, u8tmp);
if (ret)
goto err;
if (c->symbol_rate <= 3000000)
u8tmp = 0x20;
else if (c->symbol_rate <= 10000000)
u8tmp = 0x10;
else
u8tmp = 0x06;
ret = regmap_write(dev->regmap, 0xc3, 0x08);
if (ret)
goto err;
ret = regmap_write(dev->regmap, 0xc8, u8tmp);
if (ret)
goto err;
ret = regmap_write(dev->regmap, 0xc4, 0x08);
if (ret)
goto err;
ret = regmap_write(dev->regmap, 0xc7, 0x00);
if (ret)
goto err;
u16tmp = DIV_ROUND_CLOSEST_ULL((u64)c->symbol_rate * 0x10000, dev->mclk);
buf[0] = (u16tmp >> 0) & 0xff;
buf[1] = (u16tmp >> 8) & 0xff;
ret = regmap_bulk_write(dev->regmap, 0x61, buf, 2);
if (ret)
goto err;
ret = m88ds3103_update_bits(dev, 0x4d, 0x02, dev->cfg->spec_inv << 1);
if (ret)
goto err;
ret = m88ds3103_update_bits(dev, 0x30, 0x10, dev->cfg->agc_inv << 4);
if (ret)
goto err;
ret = regmap_write(dev->regmap, 0x33, dev->cfg->agc);
if (ret)
goto err;
dev_dbg(&client->dev, "carrier offset=%d\n",
(tuner_frequency_khz - c->frequency));
/* Use 32-bit calc as there is no s64 version of DIV_ROUND_CLOSEST() */
s32tmp = 0x10000 * (tuner_frequency_khz - c->frequency);
s32tmp = DIV_ROUND_CLOSEST(s32tmp, dev->mclk / 1000);
buf[0] = (s32tmp >> 0) & 0xff;
buf[1] = (s32tmp >> 8) & 0xff;
ret = regmap_bulk_write(dev->regmap, 0x5e, buf, 2);
if (ret)
goto err;
ret = regmap_write(dev->regmap, 0x00, 0x00);
if (ret)
goto err;
ret = regmap_write(dev->regmap, 0xb2, 0x00);
if (ret)
goto err;
dev->delivery_system = c->delivery_system;
return 0;
err:
dev_dbg(&client->dev, "failed=%d\n", ret);
return ret;
}
static int m88ds3103_init(struct dvb_frontend *fe)
{
struct m88ds3103_dev *dev = fe->demodulator_priv;
struct i2c_client *client = dev->client;
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
int ret, len, rem;
unsigned int utmp;
const struct firmware *firmware;
const char *name;
dev_dbg(&client->dev, "\n");
/* set cold state by default */
dev->warm = false;
/* wake up device from sleep */
ret = m88ds3103_update_bits(dev, 0x08, 0x01, 0x01);
if (ret)
goto err;
ret = m88ds3103_update_bits(dev, 0x04, 0x01, 0x00);
if (ret)
goto err;
ret = m88ds3103_update_bits(dev, 0x23, 0x10, 0x00);
if (ret)
goto err;
/* firmware status */
ret = regmap_read(dev->regmap, 0xb9, &utmp);
if (ret)
goto err;
dev_dbg(&client->dev, "firmware=%02x\n", utmp);
if (utmp)
goto warm;
/* global reset, global diseqc reset, golbal fec reset */
ret = regmap_write(dev->regmap, 0x07, 0xe0);
if (ret)
goto err;
ret = regmap_write(dev->regmap, 0x07, 0x00);
if (ret)
goto err;
/* cold state - try to download firmware */
dev_info(&client->dev, "found a '%s' in cold state\n",
m88ds3103_ops.info.name);
if (dev->chip_id == M88RS6000_CHIP_ID)
name = M88RS6000_FIRMWARE;
else
name = M88DS3103_FIRMWARE;
/* request the firmware, this will block and timeout */
ret = request_firmware(&firmware, name, &client->dev);
if (ret) {
dev_err(&client->dev, "firmware file '%s' not found\n", name);
goto err;
}
dev_info(&client->dev, "downloading firmware from file '%s'\n", name);
ret = regmap_write(dev->regmap, 0xb2, 0x01);
if (ret)
goto err_release_firmware;
for (rem = firmware->size; rem > 0; rem -= (dev->cfg->i2c_wr_max - 1)) {
len = min(dev->cfg->i2c_wr_max - 1, rem);
ret = regmap_bulk_write(dev->regmap, 0xb0,
&firmware->data[firmware->size - rem],
len);
if (ret) {
dev_err(&client->dev, "firmware download failed %d\n",
ret);
goto err_release_firmware;
}
}
ret = regmap_write(dev->regmap, 0xb2, 0x00);
if (ret)
goto err_release_firmware;
release_firmware(firmware);
ret = regmap_read(dev->regmap, 0xb9, &utmp);
if (ret)
goto err;
if (!utmp) {
ret = -EINVAL;
dev_info(&client->dev, "firmware did not run\n");
goto err;
}
dev_info(&client->dev, "found a '%s' in warm state\n",
m88ds3103_ops.info.name);
dev_info(&client->dev, "firmware version: %X.%X\n",
(utmp >> 4) & 0xf, (utmp >> 0 & 0xf));
warm:
/* warm state */
dev->warm = true;
/* init stats here in order signal app which stats are supported */
c->cnr.len = 1;
c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
c->post_bit_error.len = 1;
c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
c->post_bit_count.len = 1;
c->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
return 0;
err_release_firmware:
release_firmware(firmware);
err:
dev_dbg(&client->dev, "failed=%d\n", ret);
return ret;
}
static int m88ds3103_sleep(struct dvb_frontend *fe)
{
struct m88ds3103_dev *dev = fe->demodulator_priv;
struct i2c_client *client = dev->client;
int ret;
unsigned int utmp;
dev_dbg(&client->dev, "\n");
dev->fe_status = 0;
dev->delivery_system = SYS_UNDEFINED;
/* TS Hi-Z */
if (dev->chip_id == M88RS6000_CHIP_ID)
utmp = 0x29;
else
utmp = 0x27;
ret = m88ds3103_update_bits(dev, utmp, 0x01, 0x00);
if (ret)
goto err;
/* sleep */
ret = m88ds3103_update_bits(dev, 0x08, 0x01, 0x00);
if (ret)
goto err;
ret = m88ds3103_update_bits(dev, 0x04, 0x01, 0x01);
if (ret)
goto err;
ret = m88ds3103_update_bits(dev, 0x23, 0x10, 0x10);
if (ret)
goto err;
return 0;
err:
dev_dbg(&client->dev, "failed=%d\n", ret);
return ret;
}
static int m88ds3103_get_frontend(struct dvb_frontend *fe,
struct dtv_frontend_properties *c)
{
struct m88ds3103_dev *dev = fe->demodulator_priv;
struct i2c_client *client = dev->client;
int ret;
u8 buf[3];
dev_dbg(&client->dev, "\n");
if (!dev->warm || !(dev->fe_status & FE_HAS_LOCK)) {
ret = 0;
goto err;
}
switch (c->delivery_system) {
case SYS_DVBS:
ret = regmap_bulk_read(dev->regmap, 0xe0, &buf[0], 1);
if (ret)
goto err;
ret = regmap_bulk_read(dev->regmap, 0xe6, &buf[1], 1);
if (ret)
goto err;
switch ((buf[0] >> 2) & 0x01) {
case 0:
c->inversion = INVERSION_OFF;
break;
case 1:
c->inversion = INVERSION_ON;
break;
}
switch ((buf[1] >> 5) & 0x07) {
case 0:
c->fec_inner = FEC_7_8;
break;
case 1:
c->fec_inner = FEC_5_6;
break;
case 2:
c->fec_inner = FEC_3_4;
break;
case 3:
c->fec_inner = FEC_2_3;
break;
case 4:
c->fec_inner = FEC_1_2;
break;
default:
dev_dbg(&client->dev, "invalid fec_inner\n");
}
c->modulation = QPSK;
break;
case SYS_DVBS2:
ret = regmap_bulk_read(dev->regmap, 0x7e, &buf[0], 1);
if (ret)
goto err;
ret = regmap_bulk_read(dev->regmap, 0x89, &buf[1], 1);
if (ret)
goto err;
ret = regmap_bulk_read(dev->regmap, 0xf2, &buf[2], 1);
if (ret)
goto err;
switch ((buf[0] >> 0) & 0x0f) {
case 2:
c->fec_inner = FEC_2_5;
break;
case 3:
c->fec_inner = FEC_1_2;
break;
case 4:
c->fec_inner = FEC_3_5;
break;
case 5:
c->fec_inner = FEC_2_3;
break;
case 6:
c->fec_inner = FEC_3_4;
break;
case 7:
c->fec_inner = FEC_4_5;
break;
case 8:
c->fec_inner = FEC_5_6;
break;
case 9:
c->fec_inner = FEC_8_9;
break;
case 10:
c->fec_inner = FEC_9_10;
break;
default:
dev_dbg(&client->dev, "invalid fec_inner\n");
}
switch ((buf[0] >> 5) & 0x01) {
case 0:
c->pilot = PILOT_OFF;
break;
case 1:
c->pilot = PILOT_ON;
break;
}
switch ((buf[0] >> 6) & 0x07) {
case 0:
c->modulation = QPSK;
break;
case 1:
c->modulation = PSK_8;
break;
case 2:
c->modulation = APSK_16;
break;
case 3:
c->modulation = APSK_32;
break;
default:
dev_dbg(&client->dev, "invalid modulation\n");
}
switch ((buf[1] >> 7) & 0x01) {
case 0:
c->inversion = INVERSION_OFF;
break;
case 1:
c->inversion = INVERSION_ON;
break;
}
switch ((buf[2] >> 0) & 0x03) {
case 0:
c->rolloff = ROLLOFF_35;
break;
case 1:
c->rolloff = ROLLOFF_25;
break;
case 2:
c->rolloff = ROLLOFF_20;
break;
default:
dev_dbg(&client->dev, "invalid rolloff\n");
}
break;
default:
dev_dbg(&client->dev, "invalid delivery_system\n");
ret = -EINVAL;
goto err;
}
ret = regmap_bulk_read(dev->regmap, 0x6d, buf, 2);
if (ret)
goto err;
c->symbol_rate = DIV_ROUND_CLOSEST_ULL((u64)(buf[1] << 8 | buf[0] << 0) * dev->mclk, 0x10000);
return 0;
err:
dev_dbg(&client->dev, "failed=%d\n", ret);
return ret;
}
static int m88ds3103_read_snr(struct dvb_frontend *fe, u16 *snr)
{
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
if (c->cnr.stat[0].scale == FE_SCALE_DECIBEL)
*snr = div_s64(c->cnr.stat[0].svalue, 100);
else
*snr = 0;
return 0;
}
static int m88ds3103_read_ber(struct dvb_frontend *fe, u32 *ber)
{
struct m88ds3103_dev *dev = fe->demodulator_priv;
*ber = dev->dvbv3_ber;
return 0;
}
static int m88ds3103_set_tone(struct dvb_frontend *fe,
enum fe_sec_tone_mode fe_sec_tone_mode)
{
struct m88ds3103_dev *dev = fe->demodulator_priv;
struct i2c_client *client = dev->client;
int ret;
unsigned int utmp, tone, reg_a1_mask;
dev_dbg(&client->dev, "fe_sec_tone_mode=%d\n", fe_sec_tone_mode);
if (!dev->warm) {
ret = -EAGAIN;
goto err;
}
switch (fe_sec_tone_mode) {
case SEC_TONE_ON:
tone = 0;
reg_a1_mask = 0x47;
break;
case SEC_TONE_OFF:
tone = 1;
reg_a1_mask = 0x00;
break;
default:
dev_dbg(&client->dev, "invalid fe_sec_tone_mode\n");
ret = -EINVAL;
goto err;
}
utmp = tone << 7 | dev->cfg->envelope_mode << 5;
ret = m88ds3103_update_bits(dev, 0xa2, 0xe0, utmp);
if (ret)
goto err;
utmp = 1 << 2;
ret = m88ds3103_update_bits(dev, 0xa1, reg_a1_mask, utmp);
if (ret)
goto err;
return 0;
err:
dev_dbg(&client->dev, "failed=%d\n", ret);
return ret;
}
static int m88ds3103_set_voltage(struct dvb_frontend *fe,
enum fe_sec_voltage fe_sec_voltage)
{
struct m88ds3103_dev *dev = fe->demodulator_priv;
struct i2c_client *client = dev->client;
int ret;
unsigned int utmp;
bool voltage_sel, voltage_dis;
dev_dbg(&client->dev, "fe_sec_voltage=%d\n", fe_sec_voltage);
if (!dev->warm) {
ret = -EAGAIN;
goto err;
}
switch (fe_sec_voltage) {
case SEC_VOLTAGE_18:
voltage_sel = true;
voltage_dis = false;
break;
case SEC_VOLTAGE_13:
voltage_sel = false;
voltage_dis = false;
break;
case SEC_VOLTAGE_OFF:
voltage_sel = false;
voltage_dis = true;
break;
default:
dev_dbg(&client->dev, "invalid fe_sec_voltage\n");
ret = -EINVAL;
goto err;
}
/* output pin polarity */
voltage_sel ^= dev->cfg->lnb_hv_pol;
voltage_dis ^= dev->cfg->lnb_en_pol;
utmp = voltage_dis << 1 | voltage_sel << 0;
ret = m88ds3103_update_bits(dev, 0xa2, 0x03, utmp);
if (ret)
goto err;
return 0;
err:
dev_dbg(&client->dev, "failed=%d\n", ret);
return ret;
}
static int m88ds3103_diseqc_send_master_cmd(struct dvb_frontend *fe,
struct dvb_diseqc_master_cmd *diseqc_cmd)
{
struct m88ds3103_dev *dev = fe->demodulator_priv;
struct i2c_client *client = dev->client;
int ret;
unsigned int utmp;
unsigned long timeout;
dev_dbg(&client->dev, "msg=%*ph\n",
diseqc_cmd->msg_len, diseqc_cmd->msg);
if (!dev->warm) {
ret = -EAGAIN;
goto err;
}
if (diseqc_cmd->msg_len < 3 || diseqc_cmd->msg_len > 6) {
ret = -EINVAL;
goto err;
}
utmp = dev->cfg->envelope_mode << 5;
ret = m88ds3103_update_bits(dev, 0xa2, 0xe0, utmp);
if (ret)
goto err;
ret = regmap_bulk_write(dev->regmap, 0xa3, diseqc_cmd->msg,
diseqc_cmd->msg_len);
if (ret)
goto err;
ret = regmap_write(dev->regmap, 0xa1,
(diseqc_cmd->msg_len - 1) << 3 | 0x07);
if (ret)
goto err;
/* wait DiSEqC TX ready */
#define SEND_MASTER_CMD_TIMEOUT 120
timeout = jiffies + msecs_to_jiffies(SEND_MASTER_CMD_TIMEOUT);
/* DiSEqC message period is 13.5 ms per byte */
utmp = diseqc_cmd->msg_len * 13500;
usleep_range(utmp - 4000, utmp);
for (utmp = 1; !time_after(jiffies, timeout) && utmp;) {
ret = regmap_read(dev->regmap, 0xa1, &utmp);
if (ret)
goto err;
utmp = (utmp >> 6) & 0x1;
}
if (utmp == 0) {
dev_dbg(&client->dev, "diseqc tx took %u ms\n",
jiffies_to_msecs(jiffies) -
(jiffies_to_msecs(timeout) - SEND_MASTER_CMD_TIMEOUT));
} else {
dev_dbg(&client->dev, "diseqc tx timeout\n");
ret = m88ds3103_update_bits(dev, 0xa1, 0xc0, 0x40);
if (ret)
goto err;
}
ret = m88ds3103_update_bits(dev, 0xa2, 0xc0, 0x80);
if (ret)
goto err;
if (utmp == 1) {
ret = -ETIMEDOUT;
goto err;
}
return 0;
err:
dev_dbg(&client->dev, "failed=%d\n", ret);
return ret;
}
static int m88ds3103_diseqc_send_burst(struct dvb_frontend *fe,
enum fe_sec_mini_cmd fe_sec_mini_cmd)
{
struct m88ds3103_dev *dev = fe->demodulator_priv;
struct i2c_client *client = dev->client;
int ret;
unsigned int utmp, burst;
unsigned long timeout;
dev_dbg(&client->dev, "fe_sec_mini_cmd=%d\n", fe_sec_mini_cmd);
if (!dev->warm) {
ret = -EAGAIN;
goto err;
}
utmp = dev->cfg->envelope_mode << 5;
ret = m88ds3103_update_bits(dev, 0xa2, 0xe0, utmp);
if (ret)
goto err;
switch (fe_sec_mini_cmd) {
case SEC_MINI_A:
burst = 0x02;
break;
case SEC_MINI_B:
burst = 0x01;
break;
default:
dev_dbg(&client->dev, "invalid fe_sec_mini_cmd\n");
ret = -EINVAL;
goto err;
}
ret = regmap_write(dev->regmap, 0xa1, burst);
if (ret)
goto err;
/* wait DiSEqC TX ready */
#define SEND_BURST_TIMEOUT 40
timeout = jiffies + msecs_to_jiffies(SEND_BURST_TIMEOUT);
/* DiSEqC ToneBurst period is 12.5 ms */
usleep_range(8500, 12500);
for (utmp = 1; !time_after(jiffies, timeout) && utmp;) {
ret = regmap_read(dev->regmap, 0xa1, &utmp);
if (ret)
goto err;
utmp = (utmp >> 6) & 0x1;
}
if (utmp == 0) {
dev_dbg(&client->dev, "diseqc tx took %u ms\n",
jiffies_to_msecs(jiffies) -
(jiffies_to_msecs(timeout) - SEND_BURST_TIMEOUT));
} else {
dev_dbg(&client->dev, "diseqc tx timeout\n");
ret = m88ds3103_update_bits(dev, 0xa1, 0xc0, 0x40);
if (ret)
goto err;
}
ret = m88ds3103_update_bits(dev, 0xa2, 0xc0, 0x80);
if (ret)
goto err;
if (utmp == 1) {
ret = -ETIMEDOUT;
goto err;
}
return 0;
err:
dev_dbg(&client->dev, "failed=%d\n", ret);
return ret;
}
static int m88ds3103_get_tune_settings(struct dvb_frontend *fe,
struct dvb_frontend_tune_settings *s)
{
s->min_delay_ms = 3000;
return 0;
}
static void m88ds3103_release(struct dvb_frontend *fe)
{
struct m88ds3103_dev *dev = fe->demodulator_priv;
struct i2c_client *client = dev->client;
i2c_unregister_device(client);
}
static int m88ds3103_select(struct i2c_mux_core *muxc, u32 chan)
{
struct m88ds3103_dev *dev = i2c_mux_priv(muxc);
struct i2c_client *client = dev->client;
int ret;
struct i2c_msg msg = {
.addr = client->addr,
.flags = 0,
.len = 2,
.buf = "\x03\x11",
};
/* Open tuner I2C repeater for 1 xfer, closes automatically */
ret = __i2c_transfer(client->adapter, &msg, 1);
if (ret != 1) {
dev_warn(&client->dev, "i2c wr failed=%d\n", ret);
if (ret >= 0)
ret = -EREMOTEIO;
return ret;
}
return 0;
}
/*
* XXX: That is wrapper to m88ds3103_probe() via driver core in order to provide
* proper I2C client for legacy media attach binding.
* New users must use I2C client binding directly!
*/
struct dvb_frontend *m88ds3103_attach(const struct m88ds3103_config *cfg,
media: m88ds3103: don't call a non-initalized function If m88d3103 chip ID is not recognized, the device is not initialized. However, it returns from probe without any error, causing this OOPS: [ 7.689289] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 7.689297] pgd = 7b0bd7a7 [ 7.689302] [00000000] *pgd=00000000 [ 7.689318] Internal error: Oops: 80000005 [#1] SMP ARM [ 7.689322] Modules linked in: dvb_usb_dvbsky(+) m88ds3103 dvb_usb_v2 dvb_core videobuf2_vmalloc videobuf2_memops videobuf2_core crc32_arm_ce videodev media [ 7.689358] CPU: 3 PID: 197 Comm: systemd-udevd Not tainted 4.15.0-mcc+ #23 [ 7.689361] Hardware name: BCM2835 [ 7.689367] PC is at 0x0 [ 7.689382] LR is at m88ds3103_attach+0x194/0x1d0 [m88ds3103] [ 7.689386] pc : [<00000000>] lr : [<bf0ae1ec>] psr: 60000013 [ 7.689391] sp : ed8e5c20 ip : ed8c1e00 fp : ed8945c0 [ 7.689395] r10: ed894000 r9 : ed894378 r8 : eda736c0 [ 7.689400] r7 : ed894070 r6 : ed8e5c44 r5 : bf0bb040 r4 : eda77600 [ 7.689405] r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : eda77600 [ 7.689412] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 7.689417] Control: 10c5383d Table: 2d8e806a DAC: 00000051 [ 7.689423] Process systemd-udevd (pid: 197, stack limit = 0xe9dbfb63) [ 7.689428] Stack: (0xed8e5c20 to 0xed8e6000) [ 7.689439] 5c20: ed853a80 eda73640 ed894000 ed8942c0 ed853a80 bf0b9e98 ed894070 bf0b9f10 [ 7.689449] 5c40: 00000000 00000000 bf08c17c c08dfc50 00000000 00000000 00000000 00000000 [ 7.689459] 5c60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 7.689468] 5c80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 7.689479] 5ca0: 00000000 00000000 ed8945c0 ed8942c0 ed894000 ed894830 bf0b9e98 00000000 [ 7.689490] 5cc0: ed894378 bf0a3cb4 bf0bc3b0 0000533b ed920540 00000000 00000034 bf0a6434 [ 7.689500] 5ce0: ee952070 ed826600 bf0a7038 bf0a2dd8 00000001 bf0a6768 bf0a2f90 ed8943c0 [ 7.689511] 5d00: 00000000 c08eca68 ed826620 ed826620 00000000 ee952070 bf0bc034 ee952000 [ 7.689521] 5d20: ed826600 bf0bb080 ffffffed c0aa9e9c c0aa9dac ed826620 c16edf6c c168c2c8 [ 7.689531] 5d40: c16edf70 00000000 bf0bc034 0000000d 00000000 c08e268c bf0bb080 ed826600 [ 7.689541] 5d60: bf0bc034 ed826654 ed826620 bf0bc034 c164c8bc 00000000 00000001 00000000 [ 7.689553] 5d80: 00000028 c08e2948 00000000 bf0bc034 c08e2848 c08e0778 ee9f0a58 ed88bab4 [ 7.689563] 5da0: bf0bc034 ed90ba80 c168c1f0 c08e1934 bf0bb3bc c17045ac bf0bc034 c164c8bc [ 7.689574] 5dc0: bf0bc034 bf0bb3bc ed91f564 c08e34ec bf0bc000 c164c8bc bf0bc034 c0aa8dc4 [ 7.689584] 5de0: ffffe000 00000000 bf0bf000 ed91f600 ed91f564 c03021e4 00000001 00000000 [ 7.689595] 5e00: c166e040 8040003f ed853a80 bf0bc448 00000000 c1678174 ed853a80 f0f22000 [ 7.689605] 5e20: f0f21fff 8040003f 014000c0 ed91e700 ed91e700 c16d8e68 00000001 ed91e6c0 [ 7.689615] 5e40: bf0bc400 00000001 bf0bc400 ed91f564 00000001 00000000 00000028 c03c9a24 [ 7.689625] 5e60: 00000001 c03c8c94 ed8e5f50 ed8e5f50 00000001 bf0bc400 ed91f540 c03c8cb0 [ 7.689637] 5e80: bf0bc40c 00007fff bf0bc400 c03c60b0 00000000 bf0bc448 00000028 c0e09684 [ 7.689647] 5ea0: 00000002 bf0bc530 c1234bf8 bf0bc5dc bf0bc514 c10ebbe8 ffffe000 bf000000 [ 7.689657] 5ec0: 00011538 00000000 ed8e5f48 00000000 00000000 00000000 00000000 00000000 [ 7.689666] 5ee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 7.689676] 5f00: 00000000 00000000 7fffffff 00000000 00000013 b6e55a18 0000017b c0309104 [ 7.689686] 5f20: ed8e4000 00000000 00510af0 c03c9430 7fffffff 00000000 00000003 00000000 [ 7.689697] 5f40: 00000000 f0f0f000 00011538 00000000 f0f107b0 f0f0f000 00011538 f0f1fdb8 [ 7.689707] 5f60: f0f1fbe8 f0f1b974 00004000 000041e0 bf0bc3d0 00000001 00000000 000024c4 [ 7.689717] 5f80: 0000002d 0000002e 00000019 00000000 00000010 00000000 16894000 00000000 [ 7.689727] 5fa0: 00000000 c0308f20 16894000 00000000 00000013 b6e55a18 00000000 b6e5652c [ 7.689737] 5fc0: 16894000 00000000 00000000 0000017b 00020000 00508110 00000000 00510af0 [ 7.689748] 5fe0: bef68948 bef68938 b6e4d3d0 b6d32590 60000010 00000013 00000000 00000000 [ 7.689790] [<bf0ae1ec>] (m88ds3103_attach [m88ds3103]) from [<bf0b9f10>] (dvbsky_s960c_attach+0x78/0x280 [dvb_usb_dvbsky]) [ 7.689821] [<bf0b9f10>] (dvbsky_s960c_attach [dvb_usb_dvbsky]) from [<bf0a3cb4>] (dvb_usbv2_probe+0xa3c/0x1024 [dvb_usb_v2]) [ 7.689849] [<bf0a3cb4>] (dvb_usbv2_probe [dvb_usb_v2]) from [<c0aa9e9c>] (usb_probe_interface+0xf0/0x2a8) [ 7.689869] [<c0aa9e9c>] (usb_probe_interface) from [<c08e268c>] (driver_probe_device+0x2f8/0x4b4) [ 7.689881] [<c08e268c>] (driver_probe_device) from [<c08e2948>] (__driver_attach+0x100/0x11c) [ 7.689895] [<c08e2948>] (__driver_attach) from [<c08e0778>] (bus_for_each_dev+0x4c/0x9c) [ 7.689909] [<c08e0778>] (bus_for_each_dev) from [<c08e1934>] (bus_add_driver+0x1c0/0x264) [ 7.689919] [<c08e1934>] (bus_add_driver) from [<c08e34ec>] (driver_register+0x78/0xf4) [ 7.689931] [<c08e34ec>] (driver_register) from [<c0aa8dc4>] (usb_register_driver+0x70/0x134) [ 7.689946] [<c0aa8dc4>] (usb_register_driver) from [<c03021e4>] (do_one_initcall+0x44/0x168) [ 7.689963] [<c03021e4>] (do_one_initcall) from [<c03c9a24>] (do_init_module+0x64/0x1f4) [ 7.689979] [<c03c9a24>] (do_init_module) from [<c03c8cb0>] (load_module+0x20a0/0x25c8) [ 7.689993] [<c03c8cb0>] (load_module) from [<c03c9430>] (SyS_finit_module+0xb4/0xec) [ 7.690007] [<c03c9430>] (SyS_finit_module) from [<c0308f20>] (ret_fast_syscall+0x0/0x54) [ 7.690018] Code: bad PC value This may happen on normal circumstances, if, for some reason, the demod hangs and start returning an invalid chip ID: [ 10.394395] m88ds3103 3-0068: Unknown device. Chip_id=00 So, change the logic to cause probe to fail with -ENODEV, preventing the OOPS. Detected while testing DVB MMAP patches on Raspberry Pi 3 with DVBSky S960CI. Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-10 19:14:10 +08:00
struct i2c_adapter *i2c,
struct i2c_adapter **tuner_i2c_adapter)
{
struct i2c_client *client;
struct i2c_board_info board_info;
media: m88ds3103: don't call a non-initalized function If m88d3103 chip ID is not recognized, the device is not initialized. However, it returns from probe without any error, causing this OOPS: [ 7.689289] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 7.689297] pgd = 7b0bd7a7 [ 7.689302] [00000000] *pgd=00000000 [ 7.689318] Internal error: Oops: 80000005 [#1] SMP ARM [ 7.689322] Modules linked in: dvb_usb_dvbsky(+) m88ds3103 dvb_usb_v2 dvb_core videobuf2_vmalloc videobuf2_memops videobuf2_core crc32_arm_ce videodev media [ 7.689358] CPU: 3 PID: 197 Comm: systemd-udevd Not tainted 4.15.0-mcc+ #23 [ 7.689361] Hardware name: BCM2835 [ 7.689367] PC is at 0x0 [ 7.689382] LR is at m88ds3103_attach+0x194/0x1d0 [m88ds3103] [ 7.689386] pc : [<00000000>] lr : [<bf0ae1ec>] psr: 60000013 [ 7.689391] sp : ed8e5c20 ip : ed8c1e00 fp : ed8945c0 [ 7.689395] r10: ed894000 r9 : ed894378 r8 : eda736c0 [ 7.689400] r7 : ed894070 r6 : ed8e5c44 r5 : bf0bb040 r4 : eda77600 [ 7.689405] r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : eda77600 [ 7.689412] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 7.689417] Control: 10c5383d Table: 2d8e806a DAC: 00000051 [ 7.689423] Process systemd-udevd (pid: 197, stack limit = 0xe9dbfb63) [ 7.689428] Stack: (0xed8e5c20 to 0xed8e6000) [ 7.689439] 5c20: ed853a80 eda73640 ed894000 ed8942c0 ed853a80 bf0b9e98 ed894070 bf0b9f10 [ 7.689449] 5c40: 00000000 00000000 bf08c17c c08dfc50 00000000 00000000 00000000 00000000 [ 7.689459] 5c60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 7.689468] 5c80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 7.689479] 5ca0: 00000000 00000000 ed8945c0 ed8942c0 ed894000 ed894830 bf0b9e98 00000000 [ 7.689490] 5cc0: ed894378 bf0a3cb4 bf0bc3b0 0000533b ed920540 00000000 00000034 bf0a6434 [ 7.689500] 5ce0: ee952070 ed826600 bf0a7038 bf0a2dd8 00000001 bf0a6768 bf0a2f90 ed8943c0 [ 7.689511] 5d00: 00000000 c08eca68 ed826620 ed826620 00000000 ee952070 bf0bc034 ee952000 [ 7.689521] 5d20: ed826600 bf0bb080 ffffffed c0aa9e9c c0aa9dac ed826620 c16edf6c c168c2c8 [ 7.689531] 5d40: c16edf70 00000000 bf0bc034 0000000d 00000000 c08e268c bf0bb080 ed826600 [ 7.689541] 5d60: bf0bc034 ed826654 ed826620 bf0bc034 c164c8bc 00000000 00000001 00000000 [ 7.689553] 5d80: 00000028 c08e2948 00000000 bf0bc034 c08e2848 c08e0778 ee9f0a58 ed88bab4 [ 7.689563] 5da0: bf0bc034 ed90ba80 c168c1f0 c08e1934 bf0bb3bc c17045ac bf0bc034 c164c8bc [ 7.689574] 5dc0: bf0bc034 bf0bb3bc ed91f564 c08e34ec bf0bc000 c164c8bc bf0bc034 c0aa8dc4 [ 7.689584] 5de0: ffffe000 00000000 bf0bf000 ed91f600 ed91f564 c03021e4 00000001 00000000 [ 7.689595] 5e00: c166e040 8040003f ed853a80 bf0bc448 00000000 c1678174 ed853a80 f0f22000 [ 7.689605] 5e20: f0f21fff 8040003f 014000c0 ed91e700 ed91e700 c16d8e68 00000001 ed91e6c0 [ 7.689615] 5e40: bf0bc400 00000001 bf0bc400 ed91f564 00000001 00000000 00000028 c03c9a24 [ 7.689625] 5e60: 00000001 c03c8c94 ed8e5f50 ed8e5f50 00000001 bf0bc400 ed91f540 c03c8cb0 [ 7.689637] 5e80: bf0bc40c 00007fff bf0bc400 c03c60b0 00000000 bf0bc448 00000028 c0e09684 [ 7.689647] 5ea0: 00000002 bf0bc530 c1234bf8 bf0bc5dc bf0bc514 c10ebbe8 ffffe000 bf000000 [ 7.689657] 5ec0: 00011538 00000000 ed8e5f48 00000000 00000000 00000000 00000000 00000000 [ 7.689666] 5ee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 7.689676] 5f00: 00000000 00000000 7fffffff 00000000 00000013 b6e55a18 0000017b c0309104 [ 7.689686] 5f20: ed8e4000 00000000 00510af0 c03c9430 7fffffff 00000000 00000003 00000000 [ 7.689697] 5f40: 00000000 f0f0f000 00011538 00000000 f0f107b0 f0f0f000 00011538 f0f1fdb8 [ 7.689707] 5f60: f0f1fbe8 f0f1b974 00004000 000041e0 bf0bc3d0 00000001 00000000 000024c4 [ 7.689717] 5f80: 0000002d 0000002e 00000019 00000000 00000010 00000000 16894000 00000000 [ 7.689727] 5fa0: 00000000 c0308f20 16894000 00000000 00000013 b6e55a18 00000000 b6e5652c [ 7.689737] 5fc0: 16894000 00000000 00000000 0000017b 00020000 00508110 00000000 00510af0 [ 7.689748] 5fe0: bef68948 bef68938 b6e4d3d0 b6d32590 60000010 00000013 00000000 00000000 [ 7.689790] [<bf0ae1ec>] (m88ds3103_attach [m88ds3103]) from [<bf0b9f10>] (dvbsky_s960c_attach+0x78/0x280 [dvb_usb_dvbsky]) [ 7.689821] [<bf0b9f10>] (dvbsky_s960c_attach [dvb_usb_dvbsky]) from [<bf0a3cb4>] (dvb_usbv2_probe+0xa3c/0x1024 [dvb_usb_v2]) [ 7.689849] [<bf0a3cb4>] (dvb_usbv2_probe [dvb_usb_v2]) from [<c0aa9e9c>] (usb_probe_interface+0xf0/0x2a8) [ 7.689869] [<c0aa9e9c>] (usb_probe_interface) from [<c08e268c>] (driver_probe_device+0x2f8/0x4b4) [ 7.689881] [<c08e268c>] (driver_probe_device) from [<c08e2948>] (__driver_attach+0x100/0x11c) [ 7.689895] [<c08e2948>] (__driver_attach) from [<c08e0778>] (bus_for_each_dev+0x4c/0x9c) [ 7.689909] [<c08e0778>] (bus_for_each_dev) from [<c08e1934>] (bus_add_driver+0x1c0/0x264) [ 7.689919] [<c08e1934>] (bus_add_driver) from [<c08e34ec>] (driver_register+0x78/0xf4) [ 7.689931] [<c08e34ec>] (driver_register) from [<c0aa8dc4>] (usb_register_driver+0x70/0x134) [ 7.689946] [<c0aa8dc4>] (usb_register_driver) from [<c03021e4>] (do_one_initcall+0x44/0x168) [ 7.689963] [<c03021e4>] (do_one_initcall) from [<c03c9a24>] (do_init_module+0x64/0x1f4) [ 7.689979] [<c03c9a24>] (do_init_module) from [<c03c8cb0>] (load_module+0x20a0/0x25c8) [ 7.689993] [<c03c8cb0>] (load_module) from [<c03c9430>] (SyS_finit_module+0xb4/0xec) [ 7.690007] [<c03c9430>] (SyS_finit_module) from [<c0308f20>] (ret_fast_syscall+0x0/0x54) [ 7.690018] Code: bad PC value This may happen on normal circumstances, if, for some reason, the demod hangs and start returning an invalid chip ID: [ 10.394395] m88ds3103 3-0068: Unknown device. Chip_id=00 So, change the logic to cause probe to fail with -ENODEV, preventing the OOPS. Detected while testing DVB MMAP patches on Raspberry Pi 3 with DVBSky S960CI. Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-10 19:14:10 +08:00
struct m88ds3103_platform_data pdata = {};
pdata.clk = cfg->clock;
pdata.i2c_wr_max = cfg->i2c_wr_max;
pdata.ts_mode = cfg->ts_mode;
pdata.ts_clk = cfg->ts_clk;
pdata.ts_clk_pol = cfg->ts_clk_pol;
pdata.spec_inv = cfg->spec_inv;
pdata.agc = cfg->agc;
pdata.agc_inv = cfg->agc_inv;
pdata.clk_out = cfg->clock_out;
pdata.envelope_mode = cfg->envelope_mode;
pdata.lnb_hv_pol = cfg->lnb_hv_pol;
pdata.lnb_en_pol = cfg->lnb_en_pol;
pdata.attach_in_use = true;
memset(&board_info, 0, sizeof(board_info));
strscpy(board_info.type, "m88ds3103", I2C_NAME_SIZE);
board_info.addr = cfg->i2c_addr;
board_info.platform_data = &pdata;
client = i2c_new_device(i2c, &board_info);
if (!client || !client->dev.driver)
return NULL;
*tuner_i2c_adapter = pdata.get_i2c_adapter(client);
return pdata.get_dvb_frontend(client);
}
EXPORT_SYMBOL(m88ds3103_attach);
static const struct dvb_frontend_ops m88ds3103_ops = {
.delsys = {SYS_DVBS, SYS_DVBS2},
.info = {
.name = "Montage Technology M88DS3103",
.frequency_min_hz = 950 * MHz,
.frequency_max_hz = 2150 * MHz,
.frequency_tolerance_hz = 5 * MHz,
.symbol_rate_min = 1000000,
.symbol_rate_max = 45000000,
.caps = FE_CAN_INVERSION_AUTO |
FE_CAN_FEC_1_2 |
FE_CAN_FEC_2_3 |
FE_CAN_FEC_3_4 |
FE_CAN_FEC_4_5 |
FE_CAN_FEC_5_6 |
FE_CAN_FEC_6_7 |
FE_CAN_FEC_7_8 |
FE_CAN_FEC_8_9 |
FE_CAN_FEC_AUTO |
FE_CAN_QPSK |
FE_CAN_RECOVER |
FE_CAN_2G_MODULATION
},
.release = m88ds3103_release,
.get_tune_settings = m88ds3103_get_tune_settings,
.init = m88ds3103_init,
.sleep = m88ds3103_sleep,
.set_frontend = m88ds3103_set_frontend,
.get_frontend = m88ds3103_get_frontend,
.read_status = m88ds3103_read_status,
.read_snr = m88ds3103_read_snr,
.read_ber = m88ds3103_read_ber,
.diseqc_send_master_cmd = m88ds3103_diseqc_send_master_cmd,
.diseqc_send_burst = m88ds3103_diseqc_send_burst,
.set_tone = m88ds3103_set_tone,
.set_voltage = m88ds3103_set_voltage,
};
static struct dvb_frontend *m88ds3103_get_dvb_frontend(struct i2c_client *client)
{
struct m88ds3103_dev *dev = i2c_get_clientdata(client);
dev_dbg(&client->dev, "\n");
return &dev->fe;
}
static struct i2c_adapter *m88ds3103_get_i2c_adapter(struct i2c_client *client)
{
struct m88ds3103_dev *dev = i2c_get_clientdata(client);
dev_dbg(&client->dev, "\n");
return dev->muxc->adapter[0];
}
static int m88ds3103_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct m88ds3103_dev *dev;
struct m88ds3103_platform_data *pdata = client->dev.platform_data;
int ret;
unsigned int utmp;
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (!dev) {
ret = -ENOMEM;
goto err;
}
dev->client = client;
dev->config.clock = pdata->clk;
dev->config.i2c_wr_max = pdata->i2c_wr_max;
dev->config.ts_mode = pdata->ts_mode;
dev->config.ts_clk = pdata->ts_clk * 1000;
dev->config.ts_clk_pol = pdata->ts_clk_pol;
dev->config.spec_inv = pdata->spec_inv;
dev->config.agc_inv = pdata->agc_inv;
dev->config.clock_out = pdata->clk_out;
dev->config.envelope_mode = pdata->envelope_mode;
dev->config.agc = pdata->agc;
dev->config.lnb_hv_pol = pdata->lnb_hv_pol;
dev->config.lnb_en_pol = pdata->lnb_en_pol;
dev->cfg = &dev->config;
/* create regmap */
dev->regmap_config.reg_bits = 8,
dev->regmap_config.val_bits = 8,
dev->regmap_config.lock_arg = dev,
dev->regmap = devm_regmap_init_i2c(client, &dev->regmap_config);
if (IS_ERR(dev->regmap)) {
ret = PTR_ERR(dev->regmap);
goto err_kfree;
}
/* 0x00: chip id[6:0], 0x01: chip ver[7:0], 0x02: chip ver[15:8] */
ret = regmap_read(dev->regmap, 0x00, &utmp);
if (ret)
goto err_kfree;
dev->chip_id = utmp >> 1;
dev_dbg(&client->dev, "chip_id=%02x\n", dev->chip_id);
switch (dev->chip_id) {
case M88RS6000_CHIP_ID:
case M88DS3103_CHIP_ID:
break;
default:
media: m88ds3103: don't call a non-initalized function If m88d3103 chip ID is not recognized, the device is not initialized. However, it returns from probe without any error, causing this OOPS: [ 7.689289] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 7.689297] pgd = 7b0bd7a7 [ 7.689302] [00000000] *pgd=00000000 [ 7.689318] Internal error: Oops: 80000005 [#1] SMP ARM [ 7.689322] Modules linked in: dvb_usb_dvbsky(+) m88ds3103 dvb_usb_v2 dvb_core videobuf2_vmalloc videobuf2_memops videobuf2_core crc32_arm_ce videodev media [ 7.689358] CPU: 3 PID: 197 Comm: systemd-udevd Not tainted 4.15.0-mcc+ #23 [ 7.689361] Hardware name: BCM2835 [ 7.689367] PC is at 0x0 [ 7.689382] LR is at m88ds3103_attach+0x194/0x1d0 [m88ds3103] [ 7.689386] pc : [<00000000>] lr : [<bf0ae1ec>] psr: 60000013 [ 7.689391] sp : ed8e5c20 ip : ed8c1e00 fp : ed8945c0 [ 7.689395] r10: ed894000 r9 : ed894378 r8 : eda736c0 [ 7.689400] r7 : ed894070 r6 : ed8e5c44 r5 : bf0bb040 r4 : eda77600 [ 7.689405] r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : eda77600 [ 7.689412] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 7.689417] Control: 10c5383d Table: 2d8e806a DAC: 00000051 [ 7.689423] Process systemd-udevd (pid: 197, stack limit = 0xe9dbfb63) [ 7.689428] Stack: (0xed8e5c20 to 0xed8e6000) [ 7.689439] 5c20: ed853a80 eda73640 ed894000 ed8942c0 ed853a80 bf0b9e98 ed894070 bf0b9f10 [ 7.689449] 5c40: 00000000 00000000 bf08c17c c08dfc50 00000000 00000000 00000000 00000000 [ 7.689459] 5c60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 7.689468] 5c80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 7.689479] 5ca0: 00000000 00000000 ed8945c0 ed8942c0 ed894000 ed894830 bf0b9e98 00000000 [ 7.689490] 5cc0: ed894378 bf0a3cb4 bf0bc3b0 0000533b ed920540 00000000 00000034 bf0a6434 [ 7.689500] 5ce0: ee952070 ed826600 bf0a7038 bf0a2dd8 00000001 bf0a6768 bf0a2f90 ed8943c0 [ 7.689511] 5d00: 00000000 c08eca68 ed826620 ed826620 00000000 ee952070 bf0bc034 ee952000 [ 7.689521] 5d20: ed826600 bf0bb080 ffffffed c0aa9e9c c0aa9dac ed826620 c16edf6c c168c2c8 [ 7.689531] 5d40: c16edf70 00000000 bf0bc034 0000000d 00000000 c08e268c bf0bb080 ed826600 [ 7.689541] 5d60: bf0bc034 ed826654 ed826620 bf0bc034 c164c8bc 00000000 00000001 00000000 [ 7.689553] 5d80: 00000028 c08e2948 00000000 bf0bc034 c08e2848 c08e0778 ee9f0a58 ed88bab4 [ 7.689563] 5da0: bf0bc034 ed90ba80 c168c1f0 c08e1934 bf0bb3bc c17045ac bf0bc034 c164c8bc [ 7.689574] 5dc0: bf0bc034 bf0bb3bc ed91f564 c08e34ec bf0bc000 c164c8bc bf0bc034 c0aa8dc4 [ 7.689584] 5de0: ffffe000 00000000 bf0bf000 ed91f600 ed91f564 c03021e4 00000001 00000000 [ 7.689595] 5e00: c166e040 8040003f ed853a80 bf0bc448 00000000 c1678174 ed853a80 f0f22000 [ 7.689605] 5e20: f0f21fff 8040003f 014000c0 ed91e700 ed91e700 c16d8e68 00000001 ed91e6c0 [ 7.689615] 5e40: bf0bc400 00000001 bf0bc400 ed91f564 00000001 00000000 00000028 c03c9a24 [ 7.689625] 5e60: 00000001 c03c8c94 ed8e5f50 ed8e5f50 00000001 bf0bc400 ed91f540 c03c8cb0 [ 7.689637] 5e80: bf0bc40c 00007fff bf0bc400 c03c60b0 00000000 bf0bc448 00000028 c0e09684 [ 7.689647] 5ea0: 00000002 bf0bc530 c1234bf8 bf0bc5dc bf0bc514 c10ebbe8 ffffe000 bf000000 [ 7.689657] 5ec0: 00011538 00000000 ed8e5f48 00000000 00000000 00000000 00000000 00000000 [ 7.689666] 5ee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 7.689676] 5f00: 00000000 00000000 7fffffff 00000000 00000013 b6e55a18 0000017b c0309104 [ 7.689686] 5f20: ed8e4000 00000000 00510af0 c03c9430 7fffffff 00000000 00000003 00000000 [ 7.689697] 5f40: 00000000 f0f0f000 00011538 00000000 f0f107b0 f0f0f000 00011538 f0f1fdb8 [ 7.689707] 5f60: f0f1fbe8 f0f1b974 00004000 000041e0 bf0bc3d0 00000001 00000000 000024c4 [ 7.689717] 5f80: 0000002d 0000002e 00000019 00000000 00000010 00000000 16894000 00000000 [ 7.689727] 5fa0: 00000000 c0308f20 16894000 00000000 00000013 b6e55a18 00000000 b6e5652c [ 7.689737] 5fc0: 16894000 00000000 00000000 0000017b 00020000 00508110 00000000 00510af0 [ 7.689748] 5fe0: bef68948 bef68938 b6e4d3d0 b6d32590 60000010 00000013 00000000 00000000 [ 7.689790] [<bf0ae1ec>] (m88ds3103_attach [m88ds3103]) from [<bf0b9f10>] (dvbsky_s960c_attach+0x78/0x280 [dvb_usb_dvbsky]) [ 7.689821] [<bf0b9f10>] (dvbsky_s960c_attach [dvb_usb_dvbsky]) from [<bf0a3cb4>] (dvb_usbv2_probe+0xa3c/0x1024 [dvb_usb_v2]) [ 7.689849] [<bf0a3cb4>] (dvb_usbv2_probe [dvb_usb_v2]) from [<c0aa9e9c>] (usb_probe_interface+0xf0/0x2a8) [ 7.689869] [<c0aa9e9c>] (usb_probe_interface) from [<c08e268c>] (driver_probe_device+0x2f8/0x4b4) [ 7.689881] [<c08e268c>] (driver_probe_device) from [<c08e2948>] (__driver_attach+0x100/0x11c) [ 7.689895] [<c08e2948>] (__driver_attach) from [<c08e0778>] (bus_for_each_dev+0x4c/0x9c) [ 7.689909] [<c08e0778>] (bus_for_each_dev) from [<c08e1934>] (bus_add_driver+0x1c0/0x264) [ 7.689919] [<c08e1934>] (bus_add_driver) from [<c08e34ec>] (driver_register+0x78/0xf4) [ 7.689931] [<c08e34ec>] (driver_register) from [<c0aa8dc4>] (usb_register_driver+0x70/0x134) [ 7.689946] [<c0aa8dc4>] (usb_register_driver) from [<c03021e4>] (do_one_initcall+0x44/0x168) [ 7.689963] [<c03021e4>] (do_one_initcall) from [<c03c9a24>] (do_init_module+0x64/0x1f4) [ 7.689979] [<c03c9a24>] (do_init_module) from [<c03c8cb0>] (load_module+0x20a0/0x25c8) [ 7.689993] [<c03c8cb0>] (load_module) from [<c03c9430>] (SyS_finit_module+0xb4/0xec) [ 7.690007] [<c03c9430>] (SyS_finit_module) from [<c0308f20>] (ret_fast_syscall+0x0/0x54) [ 7.690018] Code: bad PC value This may happen on normal circumstances, if, for some reason, the demod hangs and start returning an invalid chip ID: [ 10.394395] m88ds3103 3-0068: Unknown device. Chip_id=00 So, change the logic to cause probe to fail with -ENODEV, preventing the OOPS. Detected while testing DVB MMAP patches on Raspberry Pi 3 with DVBSky S960CI. Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-02-10 19:14:10 +08:00
ret = -ENODEV;
dev_err(&client->dev, "Unknown device. Chip_id=%02x\n", dev->chip_id);
goto err_kfree;
}
switch (dev->cfg->clock_out) {
case M88DS3103_CLOCK_OUT_DISABLED:
utmp = 0x80;
break;
case M88DS3103_CLOCK_OUT_ENABLED:
utmp = 0x00;
break;
case M88DS3103_CLOCK_OUT_ENABLED_DIV2:
utmp = 0x10;
break;
default:
ret = -EINVAL;
goto err_kfree;
}
if (!pdata->ts_clk) {
ret = -EINVAL;
goto err_kfree;
}
/* 0x29 register is defined differently for m88rs6000. */
/* set internal tuner address to 0x21 */
if (dev->chip_id == M88RS6000_CHIP_ID)
utmp = 0x00;
ret = regmap_write(dev->regmap, 0x29, utmp);
if (ret)
goto err_kfree;
/* sleep */
ret = m88ds3103_update_bits(dev, 0x08, 0x01, 0x00);
if (ret)
goto err_kfree;
ret = m88ds3103_update_bits(dev, 0x04, 0x01, 0x01);
if (ret)
goto err_kfree;
ret = m88ds3103_update_bits(dev, 0x23, 0x10, 0x10);
if (ret)
goto err_kfree;
/* create mux i2c adapter for tuner */
dev->muxc = i2c_mux_alloc(client->adapter, &client->dev, 1, 0, 0,
m88ds3103_select, NULL);
if (!dev->muxc) {
ret = -ENOMEM;
goto err_kfree;
}
dev->muxc->priv = dev;
ret = i2c_mux_add_adapter(dev->muxc, 0, 0, 0);
if (ret)
goto err_kfree;
/* create dvb_frontend */
memcpy(&dev->fe.ops, &m88ds3103_ops, sizeof(struct dvb_frontend_ops));
if (dev->chip_id == M88RS6000_CHIP_ID)
strscpy(dev->fe.ops.info.name, "Montage Technology M88RS6000",
sizeof(dev->fe.ops.info.name));
if (!pdata->attach_in_use)
dev->fe.ops.release = NULL;
dev->fe.demodulator_priv = dev;
i2c_set_clientdata(client, dev);
/* setup callbacks */
pdata->get_dvb_frontend = m88ds3103_get_dvb_frontend;
pdata->get_i2c_adapter = m88ds3103_get_i2c_adapter;
return 0;
err_kfree:
kfree(dev);
err:
dev_dbg(&client->dev, "failed=%d\n", ret);
return ret;
}
static int m88ds3103_remove(struct i2c_client *client)
{
struct m88ds3103_dev *dev = i2c_get_clientdata(client);
dev_dbg(&client->dev, "\n");
i2c_mux_del_adapters(dev->muxc);
kfree(dev);
return 0;
}
static const struct i2c_device_id m88ds3103_id_table[] = {
{"m88ds3103", 0},
{}
};
MODULE_DEVICE_TABLE(i2c, m88ds3103_id_table);
static struct i2c_driver m88ds3103_driver = {
.driver = {
.name = "m88ds3103",
.suppress_bind_attrs = true,
},
.probe = m88ds3103_probe,
.remove = m88ds3103_remove,
.id_table = m88ds3103_id_table,
};
module_i2c_driver(m88ds3103_driver);
MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
MODULE_DESCRIPTION("Montage Technology M88DS3103 DVB-S/S2 demodulator driver");
MODULE_LICENSE("GPL");
MODULE_FIRMWARE(M88DS3103_FIRMWARE);
MODULE_FIRMWARE(M88RS6000_FIRMWARE);