hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
linux-sg2042/arch/arm/mach-kirkwood/board-dt.c

124 lines
3.1 KiB
C
Raw Normal View History

ARM: kirkwood: add dreamplug (fdt) support. Initially, copied guruplug-setup.c and did s/guruplug/dreamplug/g. Then, switched to SPI based NOR flash. After talking to Arnd Bergman, chose an incremental approach to adding devicetree support. First, we use the dtb to tell us we are on the dreamplug, then we gradually port over drivers. Driver porting will start with the uart (see next patch), and progress from there. Possibly, spi/flash/partitions will be next. When done, board-dt.c will no longer be dreamplug specific, and dt's can be made for the other kirkwood boards. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-28 00:07:13 +08:00
/*
* Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
*
* arch/arm/mach-kirkwood/board-dt.c
*
ARM: kirkwood: fdt: facilitate new boards during fdt migration Move all dreamplug-specific code out of board-dt.c and into board-dreamplug.c. This way new boards that are added during the conversion to fdt don't clutter up board-dt.c. Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-03-15 08:52:31 +08:00
* Flattened Device Tree board initialization
ARM: kirkwood: add dreamplug (fdt) support. Initially, copied guruplug-setup.c and did s/guruplug/dreamplug/g. Then, switched to SPI based NOR flash. After talking to Arnd Bergman, chose an incremental approach to adding devicetree support. First, we use the dtb to tell us we are on the dreamplug, then we gradually port over drivers. Driver porting will start with the uart (see next patch), and progress from there. Possibly, spi/flash/partitions will be next. When done, board-dt.c will no longer be dreamplug specific, and dt's can be made for the other kirkwood boards. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-28 00:07:13 +08:00
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/of.h>
#include <linux/of_platform.h>
ARM: Kirkwood: switch to DT clock providers With true DT clock providers available switch Kirkwood clock setup in DT- enabled boards. While AUXDATA can be removed completely from bus probing, some devices still don't know about DT. Therefore, some clkdev aliases are created until these devices also move to DT. Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-11-17 22:22:28 +08:00
#include <linux/clk-provider.h>
ARM: kirkwood: add missing kexec.h include Fixes the following build error when CONFIG_KEXEC is enabled: CC arch/arm/mach-kirkwood/board-dt.o arch/arm/mach-kirkwood/board-dt.c: In function 'kirkwood_dt_init': arch/arm/mach-kirkwood/board-dt.c:52:2: error: 'kexec_reinit' undeclared (first use in this function) arch/arm/mach-kirkwood/board-dt.c:52:2: note: each undeclared identifier is reported only once for each function it appears in Signed-off-by: Ian Campbell <ijc@hellion.org.uk> [v4, rebase onto recent Linus for repost] [v3, speak actual English in the commit message, thanks Sergei Shtylyov] [v2, using linux/kexec.h not asm/kexec.h] Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-04-29 21:40:42 +08:00
#include <linux/kexec.h>
ARM: kirkwood: add dreamplug (fdt) support. Initially, copied guruplug-setup.c and did s/guruplug/dreamplug/g. Then, switched to SPI based NOR flash. After talking to Arnd Bergman, chose an incremental approach to adding devicetree support. First, we use the dtb to tell us we are on the dreamplug, then we gradually port over drivers. Driver porting will start with the uart (see next patch), and progress from there. Possibly, spi/flash/partitions will be next. When done, board-dt.c will no longer be dreamplug specific, and dt's can be made for the other kirkwood boards. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-28 00:07:13 +08:00
#include <asm/mach/arch.h>
ARM: kirkwood: fdt: absorb kirkwood_init() We need to absorb kirkwood_init() into kirkwood_dt_init() so that as we convert drivers, we can remove the platform call, eg kirkwood_rtc_init(). This maintains compatibility with non-fdt configurations because they still call kirkwood_init() in common.c. As drivers are converted, we will reinstate the 'static' qualifier in common.c. Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-03-01 01:39:08 +08:00
#include <asm/mach/map.h>
#include <mach/bridge-regs.h>
ARM: Kirkwood: switch to DT clock providers With true DT clock providers available switch Kirkwood clock setup in DT- enabled boards. While AUXDATA can be removed completely from bus probing, some devices still don't know about DT. Therefore, some clkdev aliases are created until these devices also move to DT. Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-11-17 22:22:28 +08:00
#include <linux/platform_data/usb-ehci-orion.h>
ARM: Orion: DT support for IRQ and GPIO Controllers Both IRQ and GPIO controllers can now be represented in DT. The IRQ controllers are setup first, and then the GPIO controllers. Interrupts for GPIO lines are placed directly after the main interrupts in the interrupt space. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Josh Coombs <josh.coombs@gmail.com> Tested-by: Simon Baatz <gmbnomis@gmail.com>
2012-06-27 19:40:04 +08:00
#include <plat/irq.h>
ARM: Kirkwood: switch to DT clock providers With true DT clock providers available switch Kirkwood clock setup in DT- enabled boards. While AUXDATA can be removed completely from bus probing, some devices still don't know about DT. Therefore, some clkdev aliases are created until these devices also move to DT. Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-11-17 22:22:28 +08:00
#include <plat/common.h>
ARM: kirkwood: add dreamplug (fdt) support. Initially, copied guruplug-setup.c and did s/guruplug/dreamplug/g. Then, switched to SPI based NOR flash. After talking to Arnd Bergman, chose an incremental approach to adding devicetree support. First, we use the dtb to tell us we are on the dreamplug, then we gradually port over drivers. Driver porting will start with the uart (see next patch), and progress from there. Possibly, spi/flash/partitions will be next. When done, board-dt.c will no longer be dreamplug specific, and dt's can be made for the other kirkwood boards. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-28 00:07:13 +08:00
#include "common.h"
ARM: Kirkwood: switch to DT clock providers With true DT clock providers available switch Kirkwood clock setup in DT- enabled boards. While AUXDATA can be removed completely from bus probing, some devices still don't know about DT. Therefore, some clkdev aliases are created until these devices also move to DT. Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-11-17 22:22:28 +08:00
/*
* There are still devices that doesn't know about DT yet. Get clock
* gates here and add a clock lookup alias, so that old platform
* devices still work.
*/
static void __init kirkwood_legacy_clk_init(void)
{
struct device_node *np = of_find_compatible_node(
NULL, NULL, "marvell,kirkwood-gating-clock");
struct of_phandle_args clkspec;
ARM: kirkwood: fix to retain gbe MAC addresses for DT kernels The ethernet controller used on kirkwood looses its MAC address register contents when the corresponding clock is gated. As soon as mv643xx_eth is built as module, the clock gets gated and when loading the module, the MAC address is gone. Proper DT support for the mv643xx_eth driver is expected soon, so we add a workaround to always enable ge0/ge1 clocks on kirkwood. This workaround is also already used on non-DT kirkwood kernels. Reported-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Simon Baatz <gmbnomis@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-31 04:29:58 +08:00
struct clk *clk;
ARM: Kirkwood: switch to DT clock providers With true DT clock providers available switch Kirkwood clock setup in DT- enabled boards. While AUXDATA can be removed completely from bus probing, some devices still don't know about DT. Therefore, some clkdev aliases are created until these devices also move to DT. Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-11-17 22:22:28 +08:00
clkspec.np = np;
clkspec.args_count = 1;
clkspec.args[0] = CGC_BIT_PEX0;
orion_clkdev_add("0", "pcie",
of_clk_get_from_provider(&clkspec));
clkspec.args[0] = CGC_BIT_PEX1;
orion_clkdev_add("1", "pcie",
of_clk_get_from_provider(&clkspec));
ARM: kirkwood: fix to retain gbe MAC addresses for DT kernels The ethernet controller used on kirkwood looses its MAC address register contents when the corresponding clock is gated. As soon as mv643xx_eth is built as module, the clock gets gated and when loading the module, the MAC address is gone. Proper DT support for the mv643xx_eth driver is expected soon, so we add a workaround to always enable ge0/ge1 clocks on kirkwood. This workaround is also already used on non-DT kirkwood kernels. Reported-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Simon Baatz <gmbnomis@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-31 04:29:58 +08:00
clkspec.args[0] = CGC_BIT_SDIO;
orion_clkdev_add(NULL, "mvsdio",
ARM: Kirkwood: switch to DT clock providers With true DT clock providers available switch Kirkwood clock setup in DT- enabled boards. While AUXDATA can be removed completely from bus probing, some devices still don't know about DT. Therefore, some clkdev aliases are created until these devices also move to DT. Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-11-17 22:22:28 +08:00
of_clk_get_from_provider(&clkspec));
ARM: kirkwood: fix to retain gbe MAC addresses for DT kernels The ethernet controller used on kirkwood looses its MAC address register contents when the corresponding clock is gated. As soon as mv643xx_eth is built as module, the clock gets gated and when loading the module, the MAC address is gone. Proper DT support for the mv643xx_eth driver is expected soon, so we add a workaround to always enable ge0/ge1 clocks on kirkwood. This workaround is also already used on non-DT kirkwood kernels. Reported-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Simon Baatz <gmbnomis@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-31 04:29:58 +08:00
/*
* The ethernet interfaces forget the MAC address assigned by
* u-boot if the clocks are turned off. Until proper DT support
* is available we always enable them for now.
*/
clkspec.args[0] = CGC_BIT_GE0;
clk = of_clk_get_from_provider(&clkspec);
clk_prepare_enable(clk);
clkspec.args[0] = CGC_BIT_GE1;
clk = of_clk_get_from_provider(&clkspec);
clk_prepare_enable(clk);
ARM: Kirkwood: switch to DT clock providers With true DT clock providers available switch Kirkwood clock setup in DT- enabled boards. While AUXDATA can be removed completely from bus probing, some devices still don't know about DT. Therefore, some clkdev aliases are created until these devices also move to DT. Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-11-17 22:22:28 +08:00
}
static void __init kirkwood_of_clk_init(void)
{
ARM: kirkwood: move DT boards to SoC-centric clock init SoC centric clock init for Kirkwood can be used by calling of_clk_init. Use it and get rid of mvebu_clocks_init. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-05-11 09:08:08 +08:00
of_clk_init(NULL);
ARM: Kirkwood: switch to DT clock providers With true DT clock providers available switch Kirkwood clock setup in DT- enabled boards. While AUXDATA can be removed completely from bus probing, some devices still don't know about DT. Therefore, some clkdev aliases are created until these devices also move to DT. Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-11-17 22:22:28 +08:00
kirkwood_legacy_clk_init();
}
ARM: kirkwood: use devicetree for orion-spi Populate the devices with auxdata to set the device names which are used by clkdev to lookup the clocks. Signed-off-by: Michael Walle <micheal@walle.cc> Signed-off-by: Andrew Lunn <andrew@lunn.ch> --- v2: Add interrupts properties, although not used.
2012-06-07 02:30:57 +08:00
ARM: kirkwood: add dreamplug (fdt) support. Initially, copied guruplug-setup.c and did s/guruplug/dreamplug/g. Then, switched to SPI based NOR flash. After talking to Arnd Bergman, chose an incremental approach to adding devicetree support. First, we use the dtb to tell us we are on the dreamplug, then we gradually port over drivers. Driver porting will start with the uart (see next patch), and progress from there. Possibly, spi/flash/partitions will be next. When done, board-dt.c will no longer be dreamplug specific, and dt's can be made for the other kirkwood boards. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-28 00:07:13 +08:00
static void __init kirkwood_dt_init(void)
{
ARM: kirkwood: fdt: absorb kirkwood_init() We need to absorb kirkwood_init() into kirkwood_dt_init() so that as we convert drivers, we can remove the platform call, eg kirkwood_rtc_init(). This maintains compatibility with non-fdt configurations because they still call kirkwood_init() in common.c. As drivers are converted, we will reinstate the 'static' qualifier in common.c. Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-03-01 01:39:08 +08:00
pr_info("Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk);
/*
* Disable propagation of mbus errors to the CPU local bus,
* as this causes mbus errors (which can occur for example
* for PCI aborts) to throw CPU aborts, which we're not set
* up to deal with.
*/
writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG);
arm: mach-kirkwood: convert to use mvebu-mbus driver This commit migrates the mach-kirkwood platforms to use the mvebu-mbus driver and therefore removes the Kirkwood-specific addr-map code. The kirkwood_init_early() function is now responsible for initializing the mvebu-mbus driver by calling mvebu_mbus_init(). The address decoding windows are now registered in the kirkwood_setup_wins() function. It is worth noting that the four PCIe address decoding windows will ultimately no longer have to be registered here: it will be done automatically by the PCIe driver once Kirkwood has been migrated to use the upcoming mvebu PCIe driver. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-03-22 00:59:16 +08:00
kirkwood_setup_wins();
ARM: kirkwood: fdt: absorb kirkwood_init() We need to absorb kirkwood_init() into kirkwood_dt_init() so that as we convert drivers, we can remove the platform call, eg kirkwood_rtc_init(). This maintains compatibility with non-fdt configurations because they still call kirkwood_init() in common.c. As drivers are converted, we will reinstate the 'static' qualifier in common.c. Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-03-01 01:39:08 +08:00
kirkwood_l2_init();
arm: kirkwood: Instantiate cpufreq driver Register a platform driver structure for the cpufreq driver. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Adam Baker <linux@baker-net.org.uk> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-27 18:07:23 +08:00
kirkwood_cpufreq_init();
ARM: Orion: Add clocks using the generic clk infrastructure. Add tclk as a fixed rate clock for all platforms. In addition, on kirkwood, add a gated clock for most of the clocks which can be gated. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Jamie Lentin <jm@lentin.co.uk> [mturquette@linaro.org: removed redundant CLKDEV_LOOKUP from Kconfig] [mturquette@linaro.org: removed redundant clk.h from mach-dove/common.c] Signed-off-by: Mike Turquette <mturquette@linaro.org>
2011-12-15 15:15:07 +08:00
/* Setup root of clk tree */
ARM: Kirkwood: switch to DT clock providers With true DT clock providers available switch Kirkwood clock setup in DT- enabled boards. While AUXDATA can be removed completely from bus probing, some devices still don't know about DT. Therefore, some clkdev aliases are created until these devices also move to DT. Signed-off-by: Andrew Lunn <andrew@lunn.ch>
2012-11-17 22:22:28 +08:00
kirkwood_of_clk_init();
ARM: kirkwood: fdt: absorb kirkwood_init() We need to absorb kirkwood_init() into kirkwood_dt_init() so that as we convert drivers, we can remove the platform call, eg kirkwood_rtc_init(). This maintains compatibility with non-fdt configurations because they still call kirkwood_init() in common.c. As drivers are converted, we will reinstate the 'static' qualifier in common.c. Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-03-01 01:39:08 +08:00
cpuidle: kirkwood: Move out of mach directory Move the Kirkwood cpuidle driver out of arch/arm/mach-kirkwood and into drivers/cpuidle. Convert the driver into a platform driver. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-09 20:22:15 +08:00
kirkwood_cpuidle_init();
ARM: kirkwood: fdt: absorb kirkwood_init() We need to absorb kirkwood_init() into kirkwood_dt_init() so that as we convert drivers, we can remove the platform call, eg kirkwood_rtc_init(). This maintains compatibility with non-fdt configurations because they still call kirkwood_init() in common.c. As drivers are converted, we will reinstate the 'static' qualifier in common.c. Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-03-01 01:39:08 +08:00
#ifdef CONFIG_KEXEC
kexec_reinit = kirkwood_enable_pcie;
#endif
ARM: kirkwood: add dreamplug (fdt) support. Initially, copied guruplug-setup.c and did s/guruplug/dreamplug/g. Then, switched to SPI based NOR flash. After talking to Arnd Bergman, chose an incremental approach to adding devicetree support. First, we use the dtb to tell us we are on the dreamplug, then we gradually port over drivers. Driver porting will start with the uart (see next patch), and progress from there. Possibly, spi/flash/partitions will be next. When done, board-dt.c will no longer be dreamplug specific, and dt's can be made for the other kirkwood boards. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-28 00:07:13 +08:00
ARM: kirkwood: Basic support for DNS-320 and DNS-325 Add support for the DNS-320 and DNS-325. Describe as much as currently possible in the devicetree files, create a board-dnskw.c for everything else. Changes since last submission (V3) [Addressing comments by]:- * One MACH_DLINK_KIRKWOOD_DT for all dtb files [Grant Likely, Jason Cooper] * Drop brain-dead select "select CONFIG_MTD_OF_PARTS" [Grant Likely] * Don't add NAND support then throw it away immediately after [Grant Likely] * Describe purpose of MPP 41, 42 & 49 Changes since last submission (V2):- * Use IEEE-compliant "okay", rather than "ok" [Scott Wood] Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-04-18 18:06:40 +08:00
if (of_machine_is_compatible("dlink,dns-kirkwood"))
dnskw_init();
arm: kirkwood: use the default of match table mach-kirkwood/board-dt.c defines its own OF matching table, but in fact, it is the same to the default of_default_bus_match_table[] which is already used by mach-mvebu, mach-dove and mach-orion5x. This patch therefore makes mach-kirkwood use the same default OF matching table. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-05-15 22:04:59 +08:00
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
ARM: kirkwood: add dreamplug (fdt) support. Initially, copied guruplug-setup.c and did s/guruplug/dreamplug/g. Then, switched to SPI based NOR flash. After talking to Arnd Bergman, chose an incremental approach to adding devicetree support. First, we use the dtb to tell us we are on the dreamplug, then we gradually port over drivers. Driver porting will start with the uart (see next patch), and progress from there. Possibly, spi/flash/partitions will be next. When done, board-dt.c will no longer be dreamplug specific, and dt's can be made for the other kirkwood boards. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-28 00:07:13 +08:00
}
ARM: Kirkwood: checkpatch cleanups Mostly printk to pr_{err|info} changes and a few strings split over multiple lines are combined. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2012-10-20 19:23:16 +08:00
static const char * const kirkwood_dt_board_compat[] = {
ARM: kirkwood: remove redundant DT board files With DT support for mv643xx_eth board specific init for some boards now is unneccessary. Remove those board files, Kconfig entries, and corresponding entries in kirkwood_defconfig. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-07-04 00:57:51 +08:00
"marvell,kirkwood",
ARM: kirkwood: add dreamplug (fdt) support. Initially, copied guruplug-setup.c and did s/guruplug/dreamplug/g. Then, switched to SPI based NOR flash. After talking to Arnd Bergman, chose an incremental approach to adding devicetree support. First, we use the dtb to tell us we are on the dreamplug, then we gradually port over drivers. Driver porting will start with the uart (see next patch), and progress from there. Possibly, spi/flash/partitions will be next. When done, board-dt.c will no longer be dreamplug specific, and dt's can be made for the other kirkwood boards. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-28 00:07:13 +08:00
NULL
};
DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)")
/* Maintainer: Jason Cooper <jason@lakedaemon.net> */
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
ARM: Orion: DT support for IRQ and GPIO Controllers Both IRQ and GPIO controllers can now be represented in DT. The IRQ controllers are setup first, and then the GPIO controllers. Interrupts for GPIO lines are placed directly after the main interrupts in the interrupt space. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Josh Coombs <josh.coombs@gmail.com> Tested-by: Simon Baatz <gmbnomis@gmail.com>
2012-06-27 19:40:04 +08:00
.init_irq = orion_dt_init_irq,
ARM: delete struct sys_timer Now that the only field in struct sys_timer is .init, delete the struct, and replace the machine descriptor .timer field with the initialization function itself. This will enable moving timer drivers into drivers/clocksource without having to place a public prototype of each struct sys_timer object into include/linux; the intent is to create a single of_clocksource_init() function that determines which timer driver to initialize by scanning the device dtree, much like the proposed irqchip_init() at: http://www.spinics.net/lists/arm-kernel/msg203686.html Includes mach-omap2 fixes from Igor Grinberg. Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-11-09 03:40:59 +08:00
.init_time = kirkwood_timer_init,
ARM: kirkwood: add dreamplug (fdt) support. Initially, copied guruplug-setup.c and did s/guruplug/dreamplug/g. Then, switched to SPI based NOR flash. After talking to Arnd Bergman, chose an incremental approach to adding devicetree support. First, we use the dtb to tell us we are on the dreamplug, then we gradually port over drivers. Driver porting will start with the uart (see next patch), and progress from there. Possibly, spi/flash/partitions will be next. When done, board-dt.c will no longer be dreamplug specific, and dt's can be made for the other kirkwood boards. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-28 00:07:13 +08:00
.init_machine = kirkwood_dt_init,
.restart = kirkwood_restart,
.dt_compat = kirkwood_dt_board_compat,
MACHINE_END