linux-sg2042/drivers/usb/storage/onetouch.c

324 lines
8.3 KiB
C
Raw Normal View History

/*
* Support for the Maxtor OneTouch USB hard drive's button
*
* Current development and maintenance by:
* Copyright (c) 2005 Nick Sillik <n.sillik@temple.edu>
*
* Initial work by:
* Copyright (c) 2003 Erik Thyren <erth7411@student.uu.se>
*
* Based on usbmouse.c (Vojtech Pavlik) and xpad.c (Marko Friedemann)
*
*/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <linux/kernel.h>
#include <linux/input.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/usb/input.h>
#include "usb.h"
#include "debug.h"
#include "scsiglue.h"
#define DRV_NAME "ums-onetouch"
MODULE_DESCRIPTION("Maxtor USB OneTouch hard drive button driver");
MODULE_AUTHOR("Nick Sillik <n.sillik@temple.edu>");
MODULE_LICENSE("GPL");
#define ONETOUCH_PKT_LEN 0x02
#define ONETOUCH_BUTTON KEY_PROG1
static int onetouch_connect_input(struct us_data *ss);
static void onetouch_release_input(void *onetouch_);
struct usb_onetouch {
char name[128];
char phys[64];
struct input_dev *dev; /* input device interface */
struct usb_device *udev; /* usb device */
struct urb *irq; /* urb for interrupt in report */
unsigned char *data; /* input data */
dma_addr_t data_dma;
unsigned int is_open:1;
};
/*
* The table of devices
*/
#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
vendorName, productName, useProtocol, useTransport, \
initFunction, flags) \
{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
.driver_info = (flags) }
static struct usb_device_id onetouch_usb_ids[] = {
# include "unusual_onetouch.h"
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, onetouch_usb_ids);
#undef UNUSUAL_DEV
/*
* The flags table
*/
#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
vendor_name, product_name, use_protocol, use_transport, \
init_function, Flags) \
{ \
.vendorName = vendor_name, \
.productName = product_name, \
.useProtocol = use_protocol, \
.useTransport = use_transport, \
.initFunction = init_function, \
}
static struct us_unusual_dev onetouch_unusual_dev_list[] = {
# include "unusual_onetouch.h"
{ } /* Terminating entry */
};
#undef UNUSUAL_DEV
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
static void usb_onetouch_irq(struct urb *urb)
{
struct usb_onetouch *onetouch = urb->context;
signed char *data = onetouch->data;
struct input_dev *dev = onetouch->dev;
int status = urb->status;
int retval;
switch (status) {
case 0: /* success */
break;
case -ECONNRESET: /* unlink */
case -ENOENT:
case -ESHUTDOWN:
return;
/* -EPIPE: should clear the halt */
default: /* error */
goto resubmit;
}
input_report_key(dev, ONETOUCH_BUTTON, data[0] & 0x02);
input_sync(dev);
resubmit:
retval = usb_submit_urb (urb, GFP_ATOMIC);
if (retval)
dev_err(&dev->dev, "can't resubmit intr, %s-%s/input0, "
"retval %d\n", onetouch->udev->bus->bus_name,
onetouch->udev->devpath, retval);
}
static int usb_onetouch_open(struct input_dev *dev)
{
struct usb_onetouch *onetouch = input_get_drvdata(dev);
onetouch->is_open = 1;
onetouch->irq->dev = onetouch->udev;
if (usb_submit_urb(onetouch->irq, GFP_KERNEL)) {
dev_err(&dev->dev, "usb_submit_urb failed\n");
return -EIO;
}
return 0;
}
static void usb_onetouch_close(struct input_dev *dev)
{
struct usb_onetouch *onetouch = input_get_drvdata(dev);
usb_kill_urb(onetouch->irq);
onetouch->is_open = 0;
}
#ifdef CONFIG_PM
static void usb_onetouch_pm_hook(struct us_data *us, int action)
{
struct usb_onetouch *onetouch = (struct usb_onetouch *) us->extra;
if (onetouch->is_open) {
switch (action) {
case US_SUSPEND:
usb_kill_urb(onetouch->irq);
break;
case US_RESUME:
if (usb_submit_urb(onetouch->irq, GFP_NOIO) != 0)
dev_err(&onetouch->irq->dev->dev,
"usb_submit_urb failed\n");
break;
default:
break;
}
}
}
#endif /* CONFIG_PM */
static int onetouch_connect_input(struct us_data *ss)
{
struct usb_device *udev = ss->pusb_dev;
struct usb_host_interface *interface;
struct usb_endpoint_descriptor *endpoint;
struct usb_onetouch *onetouch;
struct input_dev *input_dev;
int pipe, maxp;
int error = -ENOMEM;
interface = ss->pusb_intf->cur_altsetting;
if (interface->desc.bNumEndpoints != 3)
return -ENODEV;
endpoint = &interface->endpoint[2].desc;
if (!usb_endpoint_is_int_in(endpoint))
return -ENODEV;
pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress);
maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe));
maxp = min(maxp, ONETOUCH_PKT_LEN);
onetouch = kzalloc(sizeof(struct usb_onetouch), GFP_KERNEL);
input_dev = input_allocate_device();
if (!onetouch || !input_dev)
goto fail1;
onetouch->data = usb_alloc_coherent(udev, ONETOUCH_PKT_LEN,
GFP_KERNEL, &onetouch->data_dma);
if (!onetouch->data)
goto fail1;
onetouch->irq = usb_alloc_urb(0, GFP_KERNEL);
if (!onetouch->irq)
goto fail2;
onetouch->udev = udev;
onetouch->dev = input_dev;
if (udev->manufacturer)
strlcpy(onetouch->name, udev->manufacturer,
sizeof(onetouch->name));
if (udev->product) {
if (udev->manufacturer)
strlcat(onetouch->name, " ", sizeof(onetouch->name));
strlcat(onetouch->name, udev->product, sizeof(onetouch->name));
}
if (!strlen(onetouch->name))
snprintf(onetouch->name, sizeof(onetouch->name),
"Maxtor Onetouch %04x:%04x",
le16_to_cpu(udev->descriptor.idVendor),
le16_to_cpu(udev->descriptor.idProduct));
usb_make_path(udev, onetouch->phys, sizeof(onetouch->phys));
strlcat(onetouch->phys, "/input0", sizeof(onetouch->phys));
input_dev->name = onetouch->name;
input_dev->phys = onetouch->phys;
usb_to_input_id(udev, &input_dev->id);
input_dev->dev.parent = &udev->dev;
set_bit(EV_KEY, input_dev->evbit);
set_bit(ONETOUCH_BUTTON, input_dev->keybit);
clear_bit(0, input_dev->keybit);
input_set_drvdata(input_dev, onetouch);
input_dev->open = usb_onetouch_open;
input_dev->close = usb_onetouch_close;
usb_fill_int_urb(onetouch->irq, udev, pipe, onetouch->data, maxp,
usb_onetouch_irq, onetouch, endpoint->bInterval);
onetouch->irq->transfer_dma = onetouch->data_dma;
onetouch->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
ss->extra_destructor = onetouch_release_input;
ss->extra = onetouch;
#ifdef CONFIG_PM
ss->suspend_resume_hook = usb_onetouch_pm_hook;
#endif
error = input_register_device(onetouch->dev);
if (error)
goto fail3;
return 0;
fail3: usb_free_urb(onetouch->irq);
fail2: usb_free_coherent(udev, ONETOUCH_PKT_LEN,
onetouch->data, onetouch->data_dma);
fail1: kfree(onetouch);
input_free_device(input_dev);
return error;
}
static void onetouch_release_input(void *onetouch_)
{
struct usb_onetouch *onetouch = (struct usb_onetouch *) onetouch_;
if (onetouch) {
usb_kill_urb(onetouch->irq);
input_unregister_device(onetouch->dev);
usb_free_urb(onetouch->irq);
usb_free_coherent(onetouch->udev, ONETOUCH_PKT_LEN,
onetouch->data, onetouch->data_dma);
}
}
static struct scsi_host_template onetouch_host_template;
static int onetouch_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct us_data *us;
int result;
result = usb_stor_probe1(&us, intf, id,
(id - onetouch_usb_ids) + onetouch_unusual_dev_list,
&onetouch_host_template);
if (result)
return result;
/* Use default transport and protocol */
result = usb_stor_probe2(us);
return result;
}
static struct usb_driver onetouch_driver = {
.name = DRV_NAME,
.probe = onetouch_probe,
.disconnect = usb_stor_disconnect,
.suspend = usb_stor_suspend,
.resume = usb_stor_resume,
.reset_resume = usb_stor_reset_resume,
.pre_reset = usb_stor_pre_reset,
.post_reset = usb_stor_post_reset,
.id_table = onetouch_usb_ids,
.soft_unbind = 1,
.no_dynamic_id = 1,
};
module_usb_stor_driver(onetouch_driver, onetouch_host_template, DRV_NAME);