linux-sg2042/drivers/pci/hotplug/pciehp_core.c

360 lines
9.4 KiB
C
Raw Normal View History

/*
* PCI Express Hot Plug Controller Driver
*
* Copyright (C) 1995,2001 Compaq Computer Corporation
* Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
* Copyright (C) 2001 IBM Corp.
* Copyright (C) 2003-2004 Intel Corporation
*
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
*
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/pci.h>
#include "pciehp.h"
#include <linux/interrupt.h>
#include <linux/time.h>
/* Global variables */
int pciehp_debug;
int pciehp_poll_mode;
int pciehp_poll_time;
int pciehp_force;
struct workqueue_struct *pciehp_wq;
#define DRIVER_VERSION "0.4"
#define DRIVER_AUTHOR "Dan Zink <dan.zink@compaq.com>, Greg Kroah-Hartman <greg@kroah.com>, Dely Sy <dely.l.sy@intel.com>"
#define DRIVER_DESC "PCI Express Hot Plug Controller Driver"
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
module_param(pciehp_debug, bool, 0644);
module_param(pciehp_poll_mode, bool, 0644);
module_param(pciehp_poll_time, int, 0644);
module_param(pciehp_force, bool, 0644);
MODULE_PARM_DESC(pciehp_debug, "Debugging mode enabled or not");
MODULE_PARM_DESC(pciehp_poll_mode, "Using polling mechanism for hot-plug events or not");
MODULE_PARM_DESC(pciehp_poll_time, "Polling mechanism frequency, in seconds");
MODULE_PARM_DESC(pciehp_force, "Force pciehp, even if _OSC and OSHP are missing");
#define PCIE_MODULE_NAME "pciehp"
static int set_attention_status (struct hotplug_slot *slot, u8 value);
static int enable_slot (struct hotplug_slot *slot);
static int disable_slot (struct hotplug_slot *slot);
static int get_power_status (struct hotplug_slot *slot, u8 *value);
static int get_attention_status (struct hotplug_slot *slot, u8 *value);
static int get_latch_status (struct hotplug_slot *slot, u8 *value);
static int get_adapter_status (struct hotplug_slot *slot, u8 *value);
/**
* release_slot - free up the memory used by a slot
* @hotplug_slot: slot to free
*/
static void release_slot(struct hotplug_slot *hotplug_slot)
{
struct slot *slot = hotplug_slot->private;
ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
__func__, hotplug_slot_name(hotplug_slot));
kfree(hotplug_slot->ops);
kfree(hotplug_slot->info);
kfree(hotplug_slot);
}
static int init_slot(struct controller *ctrl)
{
struct slot *slot = ctrl->slot;
struct hotplug_slot *hotplug = NULL;
struct hotplug_slot_info *info = NULL;
struct hotplug_slot_ops *ops = NULL;
char name[SLOT_NAME_SIZE];
int retval = -ENOMEM;
hotplug = kzalloc(sizeof(*hotplug), GFP_KERNEL);
if (!hotplug)
goto out;
info = kzalloc(sizeof(*info), GFP_KERNEL);
if (!info)
goto out;
/* Setup hotplug slot ops */
ops = kzalloc(sizeof(*ops), GFP_KERNEL);
if (!ops)
goto out;
ops->enable_slot = enable_slot;
ops->disable_slot = disable_slot;
ops->get_power_status = get_power_status;
ops->get_adapter_status = get_adapter_status;
if (MRL_SENS(ctrl))
ops->get_latch_status = get_latch_status;
if (ATTN_LED(ctrl)) {
ops->get_attention_status = get_attention_status;
ops->set_attention_status = set_attention_status;
}
/* register this slot with the hotplug pci core */
hotplug->info = info;
hotplug->private = slot;
hotplug->release = &release_slot;
hotplug->ops = ops;
slot->hotplug_slot = hotplug;
snprintf(name, SLOT_NAME_SIZE, "%u", PSN(ctrl));
ctrl_dbg(ctrl, "Registering domain:bus:dev=%04x:%02x:00 sun=%x\n",
pci_domain_nr(ctrl->pcie->port->subordinate),
ctrl->pcie->port->subordinate->number, PSN(ctrl));
retval = pci_hp_register(hotplug,
ctrl->pcie->port->subordinate, 0, name);
if (retval)
ctrl_err(ctrl,
"pci_hp_register failed with error %d\n", retval);
out:
if (retval) {
kfree(ops);
kfree(info);
kfree(hotplug);
}
return retval;
}
static void cleanup_slot(struct controller *ctrl)
{
pci_hp_deregister(ctrl->slot->hotplug_slot);
}
/*
* set_attention_status - Turns the Amber LED for a slot on, off or blink
*/
static int set_attention_status(struct hotplug_slot *hotplug_slot, u8 status)
{
struct slot *slot = hotplug_slot->private;
ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
__func__, slot_name(slot));
return pciehp_set_attention_status(slot, status);
}
static int enable_slot(struct hotplug_slot *hotplug_slot)
{
struct slot *slot = hotplug_slot->private;
ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
__func__, slot_name(slot));
return pciehp_sysfs_enable_slot(slot);
}
static int disable_slot(struct hotplug_slot *hotplug_slot)
{
struct slot *slot = hotplug_slot->private;
ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
__func__, slot_name(slot));
return pciehp_sysfs_disable_slot(slot);
}
static int get_power_status(struct hotplug_slot *hotplug_slot, u8 *value)
{
struct slot *slot = hotplug_slot->private;
ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
__func__, slot_name(slot));
return pciehp_get_power_status(slot, value);
}
static int get_attention_status(struct hotplug_slot *hotplug_slot, u8 *value)
{
struct slot *slot = hotplug_slot->private;
ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
__func__, slot_name(slot));
return pciehp_get_attention_status(slot, value);
}
static int get_latch_status(struct hotplug_slot *hotplug_slot, u8 *value)
{
struct slot *slot = hotplug_slot->private;
ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
__func__, slot_name(slot));
return pciehp_get_latch_status(slot, value);
}
static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value)
{
struct slot *slot = hotplug_slot->private;
ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
__func__, slot_name(slot));
return pciehp_get_adapter_status(slot, value);
}
static int pciehp_probe(struct pcie_device *dev)
{
int rc;
struct controller *ctrl;
struct slot *slot;
u8 occupied, poweron;
if (pciehp_force)
dev_info(&dev->device,
"Bypassing BIOS check for pciehp use on %s\n",
pci_name(dev->port));
else if (pciehp_get_hp_hw_control_from_firmware(dev->port))
goto err_out_none;
ctrl = pcie_init(dev);
if (!ctrl) {
dev_err(&dev->device, "Controller initialization failed\n");
goto err_out_none;
}
set_service_data(dev, ctrl);
/* Setup the slot information structures */
rc = init_slot(ctrl);
if (rc) {
PCI: introduce pci_slot Currently, /sys/bus/pci/slots/ only exposes hotplug attributes when a hotplug driver is loaded, but PCI slots have attributes such as address, speed, width, etc. that are not related to hotplug at all. Introduce pci_slot as the primary data structure and kobject model. Hotplug attributes described in hotplug_slot become a secondary structure associated with the pci_slot. This patch only creates the infrastructure that allows the separation of PCI slot attributes and hotplug attributes. In this patch, the PCI hotplug core remains the only user of this infrastructure, and thus, /sys/bus/pci/slots/ will still only become populated when a hotplug driver is loaded. A later patch in this series will add a second user of this new infrastructure and demonstrate splitting the task of exposing pci_slot attributes from hotplug_slot attributes. - Make pci_slot the primary sysfs entity. hotplug_slot becomes a subsidiary structure. o pci_create_slot() creates and registers a slot with the PCI core o pci_slot_add_hotplug() gives it hotplug capability - Change the prototype of pci_hp_register() to take the bus and slot number (on parent bus) as parameters. - Remove all the ->get_address methods since this functionality is now handled by pci_slot directly. [achiang@hp.com: rpaphp-correctly-pci_hp_register-for-empty-pci-slots] Tested-by: Badari Pulavarty <pbadari@us.ibm.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: make headers_check happy] [akpm@linux-foundation.org: nuther build fix] [akpm@linux-foundation.org: fix typo in #include] Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Matthew Wilcox <matthew@wil.cx> Cc: Greg KH <greg@kroah.com> Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Cc: Len Brown <lenb@kernel.org> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-06-11 05:28:50 +08:00
if (rc == -EBUSY)
ctrl_warn(ctrl, "Slot already registered by another "
"hotplug driver\n");
PCI: introduce pci_slot Currently, /sys/bus/pci/slots/ only exposes hotplug attributes when a hotplug driver is loaded, but PCI slots have attributes such as address, speed, width, etc. that are not related to hotplug at all. Introduce pci_slot as the primary data structure and kobject model. Hotplug attributes described in hotplug_slot become a secondary structure associated with the pci_slot. This patch only creates the infrastructure that allows the separation of PCI slot attributes and hotplug attributes. In this patch, the PCI hotplug core remains the only user of this infrastructure, and thus, /sys/bus/pci/slots/ will still only become populated when a hotplug driver is loaded. A later patch in this series will add a second user of this new infrastructure and demonstrate splitting the task of exposing pci_slot attributes from hotplug_slot attributes. - Make pci_slot the primary sysfs entity. hotplug_slot becomes a subsidiary structure. o pci_create_slot() creates and registers a slot with the PCI core o pci_slot_add_hotplug() gives it hotplug capability - Change the prototype of pci_hp_register() to take the bus and slot number (on parent bus) as parameters. - Remove all the ->get_address methods since this functionality is now handled by pci_slot directly. [achiang@hp.com: rpaphp-correctly-pci_hp_register-for-empty-pci-slots] Tested-by: Badari Pulavarty <pbadari@us.ibm.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: make headers_check happy] [akpm@linux-foundation.org: nuther build fix] [akpm@linux-foundation.org: fix typo in #include] Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Matthew Wilcox <matthew@wil.cx> Cc: Greg KH <greg@kroah.com> Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Cc: Len Brown <lenb@kernel.org> Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-06-11 05:28:50 +08:00
else
ctrl_err(ctrl, "Slot initialization failed\n");
goto err_out_release_ctlr;
}
/* Enable events after we have setup the data structures */
rc = pcie_init_notification(ctrl);
if (rc) {
ctrl_err(ctrl, "Notification initialization failed\n");
goto err_out_free_ctrl_slot;
}
/* Check if slot is occupied */
slot = ctrl->slot;
pciehp_get_adapter_status(slot, &occupied);
pciehp_get_power_status(slot, &poweron);
if (occupied && pciehp_force)
pciehp_enable_slot(slot);
/* If empty slot's power status is on, turn power off */
if (!occupied && poweron && POWER_CTRL(ctrl))
pciehp_power_off_slot(slot);
return 0;
err_out_free_ctrl_slot:
cleanup_slot(ctrl);
err_out_release_ctlr:
pciehp_release_ctrl(ctrl);
err_out_none:
return -ENODEV;
}
static void pciehp_remove(struct pcie_device *dev)
{
struct controller *ctrl = get_service_data(dev);
cleanup_slot(ctrl);
pciehp_release_ctrl(ctrl);
}
#ifdef CONFIG_PM
static int pciehp_suspend (struct pcie_device *dev)
{
dev_info(&dev->device, "%s ENTRY\n", __func__);
return 0;
}
static int pciehp_resume (struct pcie_device *dev)
{
dev_info(&dev->device, "%s ENTRY\n", __func__);
if (pciehp_force) {
struct controller *ctrl = get_service_data(dev);
struct slot *slot;
u8 status;
/* reinitialize the chipset's event detection logic */
pcie_enable_notification(ctrl);
slot = ctrl->slot;
/* Check if slot is occupied */
pciehp_get_adapter_status(slot, &status);
if (status)
pciehp_enable_slot(slot);
else
pciehp_disable_slot(slot);
}
return 0;
}
#endif /* PM */
static struct pcie_port_service_driver hpdriver_portdrv = {
.name = PCIE_MODULE_NAME,
.port_type = PCIE_ANY_PORT,
.service = PCIE_PORT_SERVICE_HP,
.probe = pciehp_probe,
.remove = pciehp_remove,
#ifdef CONFIG_PM
.suspend = pciehp_suspend,
.resume = pciehp_resume,
#endif /* PM */
};
static int __init pcied_init(void)
{
int retval = 0;
pciehp_firmware_init();
retval = pcie_port_service_register(&hpdriver_portdrv);
dbg("pcie_port_service_register = %d\n", retval);
info(DRIVER_DESC " version: " DRIVER_VERSION "\n");
if (retval)
dbg("Failure to register service\n");
return retval;
}
static void __exit pcied_cleanup(void)
{
dbg("unload_pciehpd()\n");
pcie_port_service_unregister(&hpdriver_portdrv);
info(DRIVER_DESC " version: " DRIVER_VERSION " unloaded\n");
}
module_init(pcied_init);
module_exit(pcied_cleanup);