drivers/misc: Add Aspeed LPC control driver
In order to manage server systems, there is typically another processor
known as a BMC (Baseboard Management Controller) which is responsible
for powering the server and other various elements, sometimes fans,
often the system flash.
The Aspeed BMC family which is what is used on OpenPOWER machines and a
number of x86 as well is typically connected to the host via an LPC
(Low Pin Count) bus (among others).
The LPC bus is an ISA bus on steroids. It's generally used by the
BMC chip to provide the host with access to the system flash (via MEM/FW
cycles) that contains the BIOS or other host firmware along with a
number of SuperIO-style IOs (via IO space) such as UARTs, IPMI
controllers.
On the BMC chip side, this is all configured via a bunch of registers
whose content is related to a given policy of what devices are exposed
at a per system level, which is system/vendor specific, so we don't want
to bolt that into the BMC kernel. This started with a need to provide
something nicer than /dev/mem for user space to configure these things.
One important aspect of the configuration is how the MEM/FW space is
exposed to the host (ie, the x86 or POWER). Some registers in that
bridge can define a window remapping all or portion of the LPC MEM/FW
space to a portion of the BMC internal bus, with no specific limits
imposed in HW.
I think it makes sense to ensure that this window is configured by a
kernel driver that can apply some serious sanity checks on what it is
configured to map.
In practice, user space wants to control this by flipping the mapping
between essentially two types of portions of the BMC address space:
- The flash space. This is a region of the BMC MMIO space that
more/less directly maps the system flash (at least for reads, writes
are somewhat more complicated).
- One (or more) reserved area(s) of the BMC physical memory.
The latter is needed for a number of things, such as avoiding letting
the host manipulate the innards of the BMC flash controller via some
evil backdoor, we want to do flash updates by routing the window to a
portion of memory (under control of a mailbox protocol via some
separate set of registers) which the host can use to write new data in
bulk and then request the BMC to flash it. There are other uses, such
as allowing the host to boot from an in-memory flash image rather than
the one in flash (very handy for continuous integration and test, the
BMC can just download new images).
It is important to note that due to the way the Aspeed chip lets the
kernel configure the mapping between host LPC addresses and BMC ram
addresses the offset within the window must be a multiple of size.
Not doing so will fragment the accessible space rather than simply
moving 'zero' upwards. This is caused by the nature of HICR8 being a
mask and the way host LPC addresses are translated.
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-17 11:28:49 +08:00
|
|
|
/*
|
|
|
|
* Copyright 2017 IBM Corporation
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or
|
|
|
|
* modify it under the terms of the GNU General Public License
|
|
|
|
* as published by the Free Software Foundation; either version
|
|
|
|
* 2 of the License, or (at your option) any later version.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/mfd/syscon.h>
|
|
|
|
#include <linux/miscdevice.h>
|
|
|
|
#include <linux/mm.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/of_address.h>
|
|
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/poll.h>
|
|
|
|
#include <linux/regmap.h>
|
|
|
|
|
|
|
|
#include <linux/aspeed-lpc-ctrl.h>
|
|
|
|
|
|
|
|
#define DEVICE_NAME "aspeed-lpc-ctrl"
|
|
|
|
|
|
|
|
#define HICR7 0x8
|
|
|
|
#define HICR8 0xc
|
|
|
|
|
|
|
|
struct aspeed_lpc_ctrl {
|
|
|
|
struct miscdevice miscdev;
|
|
|
|
struct regmap *regmap;
|
|
|
|
phys_addr_t mem_base;
|
|
|
|
resource_size_t mem_size;
|
|
|
|
u32 pnor_size;
|
|
|
|
u32 pnor_base;
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct aspeed_lpc_ctrl *file_aspeed_lpc_ctrl(struct file *file)
|
|
|
|
{
|
|
|
|
return container_of(file->private_data, struct aspeed_lpc_ctrl,
|
|
|
|
miscdev);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int aspeed_lpc_ctrl_mmap(struct file *file, struct vm_area_struct *vma)
|
|
|
|
{
|
|
|
|
struct aspeed_lpc_ctrl *lpc_ctrl = file_aspeed_lpc_ctrl(file);
|
|
|
|
unsigned long vsize = vma->vm_end - vma->vm_start;
|
|
|
|
pgprot_t prot = vma->vm_page_prot;
|
|
|
|
|
|
|
|
if (vma->vm_pgoff + vsize > lpc_ctrl->mem_base + lpc_ctrl->mem_size)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
/* ast2400/2500 AHB accesses are not cache coherent */
|
2017-03-22 11:13:28 +08:00
|
|
|
prot = pgprot_noncached(prot);
|
drivers/misc: Add Aspeed LPC control driver
In order to manage server systems, there is typically another processor
known as a BMC (Baseboard Management Controller) which is responsible
for powering the server and other various elements, sometimes fans,
often the system flash.
The Aspeed BMC family which is what is used on OpenPOWER machines and a
number of x86 as well is typically connected to the host via an LPC
(Low Pin Count) bus (among others).
The LPC bus is an ISA bus on steroids. It's generally used by the
BMC chip to provide the host with access to the system flash (via MEM/FW
cycles) that contains the BIOS or other host firmware along with a
number of SuperIO-style IOs (via IO space) such as UARTs, IPMI
controllers.
On the BMC chip side, this is all configured via a bunch of registers
whose content is related to a given policy of what devices are exposed
at a per system level, which is system/vendor specific, so we don't want
to bolt that into the BMC kernel. This started with a need to provide
something nicer than /dev/mem for user space to configure these things.
One important aspect of the configuration is how the MEM/FW space is
exposed to the host (ie, the x86 or POWER). Some registers in that
bridge can define a window remapping all or portion of the LPC MEM/FW
space to a portion of the BMC internal bus, with no specific limits
imposed in HW.
I think it makes sense to ensure that this window is configured by a
kernel driver that can apply some serious sanity checks on what it is
configured to map.
In practice, user space wants to control this by flipping the mapping
between essentially two types of portions of the BMC address space:
- The flash space. This is a region of the BMC MMIO space that
more/less directly maps the system flash (at least for reads, writes
are somewhat more complicated).
- One (or more) reserved area(s) of the BMC physical memory.
The latter is needed for a number of things, such as avoiding letting
the host manipulate the innards of the BMC flash controller via some
evil backdoor, we want to do flash updates by routing the window to a
portion of memory (under control of a mailbox protocol via some
separate set of registers) which the host can use to write new data in
bulk and then request the BMC to flash it. There are other uses, such
as allowing the host to boot from an in-memory flash image rather than
the one in flash (very handy for continuous integration and test, the
BMC can just download new images).
It is important to note that due to the way the Aspeed chip lets the
kernel configure the mapping between host LPC addresses and BMC ram
addresses the offset within the window must be a multiple of size.
Not doing so will fragment the accessible space rather than simply
moving 'zero' upwards. This is caused by the nature of HICR8 being a
mask and the way host LPC addresses are translated.
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-17 11:28:49 +08:00
|
|
|
|
|
|
|
if (remap_pfn_range(vma, vma->vm_start,
|
|
|
|
(lpc_ctrl->mem_base >> PAGE_SHIFT) + vma->vm_pgoff,
|
|
|
|
vsize, prot))
|
|
|
|
return -EAGAIN;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static long aspeed_lpc_ctrl_ioctl(struct file *file, unsigned int cmd,
|
|
|
|
unsigned long param)
|
|
|
|
{
|
|
|
|
struct aspeed_lpc_ctrl *lpc_ctrl = file_aspeed_lpc_ctrl(file);
|
|
|
|
void __user *p = (void __user *)param;
|
|
|
|
struct aspeed_lpc_ctrl_mapping map;
|
|
|
|
u32 addr;
|
|
|
|
u32 size;
|
|
|
|
long rc;
|
|
|
|
|
|
|
|
if (copy_from_user(&map, p, sizeof(map)))
|
|
|
|
return -EFAULT;
|
|
|
|
|
|
|
|
if (map.flags != 0)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
switch (cmd) {
|
|
|
|
case ASPEED_LPC_CTRL_IOCTL_GET_SIZE:
|
|
|
|
/* The flash windows don't report their size */
|
|
|
|
if (map.window_type != ASPEED_LPC_CTRL_WINDOW_MEMORY)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
/* Support more than one window id in the future */
|
|
|
|
if (map.window_id != 0)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
map.size = lpc_ctrl->mem_size;
|
|
|
|
|
|
|
|
return copy_to_user(p, &map, sizeof(map)) ? -EFAULT : 0;
|
|
|
|
case ASPEED_LPC_CTRL_IOCTL_MAP:
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The top half of HICR7 is the MSB of the BMC address of the
|
|
|
|
* mapping.
|
|
|
|
* The bottom half of HICR7 is the MSB of the HOST LPC
|
|
|
|
* firmware space address of the mapping.
|
|
|
|
*
|
|
|
|
* The 1 bits in the top of half of HICR8 represent the bits
|
|
|
|
* (in the requested address) that should be ignored and
|
|
|
|
* replaced with those from the top half of HICR7.
|
|
|
|
* The 1 bits in the bottom half of HICR8 represent the bits
|
|
|
|
* (in the requested address) that should be kept and pass
|
|
|
|
* into the BMC address space.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/*
|
|
|
|
* It doesn't make sense to talk about a size or offset with
|
|
|
|
* low 16 bits set. Both HICR7 and HICR8 talk about the top 16
|
|
|
|
* bits of addresses and sizes.
|
|
|
|
*/
|
|
|
|
|
|
|
|
if ((map.size & 0x0000ffff) || (map.offset & 0x0000ffff))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Because of the way the masks work in HICR8 offset has to
|
|
|
|
* be a multiple of size.
|
|
|
|
*/
|
|
|
|
if (map.offset & (map.size - 1))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if (map.window_type == ASPEED_LPC_CTRL_WINDOW_FLASH) {
|
|
|
|
addr = lpc_ctrl->pnor_base;
|
|
|
|
size = lpc_ctrl->pnor_size;
|
|
|
|
} else if (map.window_type == ASPEED_LPC_CTRL_WINDOW_MEMORY) {
|
|
|
|
addr = lpc_ctrl->mem_base;
|
|
|
|
size = lpc_ctrl->mem_size;
|
|
|
|
} else {
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Check overflow first! */
|
|
|
|
if (map.offset + map.size < map.offset ||
|
|
|
|
map.offset + map.size > size)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if (map.size == 0 || map.size > size)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
addr += map.offset;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* addr (host lpc address) is safe regardless of values. This
|
|
|
|
* simply changes the address the host has to request on its
|
|
|
|
* side of the LPC bus. This cannot impact the hosts own
|
|
|
|
* memory space by surprise as LPC specific accessors are
|
|
|
|
* required. The only strange thing that could be done is
|
|
|
|
* setting the lower 16 bits but the shift takes care of that.
|
|
|
|
*/
|
|
|
|
|
|
|
|
rc = regmap_write(lpc_ctrl->regmap, HICR7,
|
|
|
|
(addr | (map.addr >> 16)));
|
|
|
|
if (rc)
|
|
|
|
return rc;
|
|
|
|
|
|
|
|
return regmap_write(lpc_ctrl->regmap, HICR8,
|
|
|
|
(~(map.size - 1)) | ((map.size >> 16) - 1));
|
|
|
|
}
|
|
|
|
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct file_operations aspeed_lpc_ctrl_fops = {
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
.mmap = aspeed_lpc_ctrl_mmap,
|
|
|
|
.unlocked_ioctl = aspeed_lpc_ctrl_ioctl,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int aspeed_lpc_ctrl_probe(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
struct aspeed_lpc_ctrl *lpc_ctrl;
|
|
|
|
struct device_node *node;
|
|
|
|
struct resource resm;
|
|
|
|
struct device *dev;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
dev = &pdev->dev;
|
|
|
|
|
|
|
|
lpc_ctrl = devm_kzalloc(dev, sizeof(*lpc_ctrl), GFP_KERNEL);
|
|
|
|
if (!lpc_ctrl)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
node = of_parse_phandle(dev->of_node, "flash", 0);
|
|
|
|
if (!node) {
|
|
|
|
dev_err(dev, "Didn't find host pnor flash node\n");
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
|
|
|
rc = of_address_to_resource(node, 1, &resm);
|
|
|
|
of_node_put(node);
|
|
|
|
if (rc) {
|
|
|
|
dev_err(dev, "Couldn't address to resource for flash\n");
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
|
|
|
lpc_ctrl->pnor_size = resource_size(&resm);
|
|
|
|
lpc_ctrl->pnor_base = resm.start;
|
|
|
|
|
|
|
|
dev_set_drvdata(&pdev->dev, lpc_ctrl);
|
|
|
|
|
|
|
|
node = of_parse_phandle(dev->of_node, "memory-region", 0);
|
|
|
|
if (!node) {
|
|
|
|
dev_err(dev, "Didn't find reserved memory\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
rc = of_address_to_resource(node, 0, &resm);
|
|
|
|
of_node_put(node);
|
|
|
|
if (rc) {
|
|
|
|
dev_err(dev, "Couldn't address to resource for reserved memory\n");
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
|
|
|
lpc_ctrl->mem_size = resource_size(&resm);
|
|
|
|
lpc_ctrl->mem_base = resm.start;
|
|
|
|
|
|
|
|
lpc_ctrl->regmap = syscon_node_to_regmap(
|
|
|
|
pdev->dev.parent->of_node);
|
|
|
|
if (IS_ERR(lpc_ctrl->regmap)) {
|
|
|
|
dev_err(dev, "Couldn't get regmap\n");
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
|
|
|
lpc_ctrl->miscdev.minor = MISC_DYNAMIC_MINOR;
|
|
|
|
lpc_ctrl->miscdev.name = DEVICE_NAME;
|
|
|
|
lpc_ctrl->miscdev.fops = &aspeed_lpc_ctrl_fops;
|
|
|
|
lpc_ctrl->miscdev.parent = dev;
|
|
|
|
rc = misc_register(&lpc_ctrl->miscdev);
|
|
|
|
if (rc)
|
|
|
|
dev_err(dev, "Unable to register device\n");
|
|
|
|
else
|
2017-03-24 00:08:08 +08:00
|
|
|
dev_info(dev, "Loaded at %pr\n", &resm);
|
drivers/misc: Add Aspeed LPC control driver
In order to manage server systems, there is typically another processor
known as a BMC (Baseboard Management Controller) which is responsible
for powering the server and other various elements, sometimes fans,
often the system flash.
The Aspeed BMC family which is what is used on OpenPOWER machines and a
number of x86 as well is typically connected to the host via an LPC
(Low Pin Count) bus (among others).
The LPC bus is an ISA bus on steroids. It's generally used by the
BMC chip to provide the host with access to the system flash (via MEM/FW
cycles) that contains the BIOS or other host firmware along with a
number of SuperIO-style IOs (via IO space) such as UARTs, IPMI
controllers.
On the BMC chip side, this is all configured via a bunch of registers
whose content is related to a given policy of what devices are exposed
at a per system level, which is system/vendor specific, so we don't want
to bolt that into the BMC kernel. This started with a need to provide
something nicer than /dev/mem for user space to configure these things.
One important aspect of the configuration is how the MEM/FW space is
exposed to the host (ie, the x86 or POWER). Some registers in that
bridge can define a window remapping all or portion of the LPC MEM/FW
space to a portion of the BMC internal bus, with no specific limits
imposed in HW.
I think it makes sense to ensure that this window is configured by a
kernel driver that can apply some serious sanity checks on what it is
configured to map.
In practice, user space wants to control this by flipping the mapping
between essentially two types of portions of the BMC address space:
- The flash space. This is a region of the BMC MMIO space that
more/less directly maps the system flash (at least for reads, writes
are somewhat more complicated).
- One (or more) reserved area(s) of the BMC physical memory.
The latter is needed for a number of things, such as avoiding letting
the host manipulate the innards of the BMC flash controller via some
evil backdoor, we want to do flash updates by routing the window to a
portion of memory (under control of a mailbox protocol via some
separate set of registers) which the host can use to write new data in
bulk and then request the BMC to flash it. There are other uses, such
as allowing the host to boot from an in-memory flash image rather than
the one in flash (very handy for continuous integration and test, the
BMC can just download new images).
It is important to note that due to the way the Aspeed chip lets the
kernel configure the mapping between host LPC addresses and BMC ram
addresses the offset within the window must be a multiple of size.
Not doing so will fragment the accessible space rather than simply
moving 'zero' upwards. This is caused by the nature of HICR8 being a
mask and the way host LPC addresses are translated.
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-17 11:28:49 +08:00
|
|
|
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int aspeed_lpc_ctrl_remove(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
struct aspeed_lpc_ctrl *lpc_ctrl = dev_get_drvdata(&pdev->dev);
|
|
|
|
|
|
|
|
misc_deregister(&lpc_ctrl->miscdev);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct of_device_id aspeed_lpc_ctrl_match[] = {
|
|
|
|
{ .compatible = "aspeed,ast2400-lpc-ctrl" },
|
|
|
|
{ .compatible = "aspeed,ast2500-lpc-ctrl" },
|
|
|
|
{ },
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct platform_driver aspeed_lpc_ctrl_driver = {
|
|
|
|
.driver = {
|
|
|
|
.name = DEVICE_NAME,
|
|
|
|
.of_match_table = aspeed_lpc_ctrl_match,
|
|
|
|
},
|
|
|
|
.probe = aspeed_lpc_ctrl_probe,
|
|
|
|
.remove = aspeed_lpc_ctrl_remove,
|
|
|
|
};
|
|
|
|
|
|
|
|
module_platform_driver(aspeed_lpc_ctrl_driver);
|
|
|
|
|
|
|
|
MODULE_DEVICE_TABLE(of, aspeed_lpc_ctrl_match);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
MODULE_AUTHOR("Cyril Bur <cyrilbur@gmail.com>");
|
|
|
|
MODULE_DESCRIPTION("Control for aspeed 2400/2500 LPC HOST to BMC mappings");
|