316 lines
9.7 KiB
Plaintext
316 lines
9.7 KiB
Plaintext
|
What: /sys/class/regulator/.../state
|
||
|
|
Date: April 2008
|
||
|
|
KernelVersion: 2.6.26
|
||
|
|
Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com>
|
||
|
|
Description:
|
||
|
|
Each regulator directory will contain a field called
|
||
|
|
state. This holds the regulator output state.
|
||
|
|
|
||
|
|
This will be one of the following strings:
|
||
|
|
|
||
|
|
'enabled'
|
||
|
|
'disabled'
|
||
|
|
'unknown'
|
||
|
|
|
||
|
|
'enabled' means the regulator output is ON and is supplying
|
||
|
|
power to the system.
|
||
|
|
|
||
|
|
'disabled' means the regulator output is OFF and is not
|
||
|
|
supplying power to the system..
|
||
|
|
|
||
|
|
'unknown' means software cannot determine the state.
|
||
|
|
|
||
|
|
NOTE: this field can be used in conjunction with microvolts
|
||
|
|
and microamps to determine regulator output levels.
|
||
|
|
|
||
|
|
|
||
|
|
What: /sys/class/regulator/.../type
|
||
|
|
Date: April 2008
|
||
|
|
KernelVersion: 2.6.26
|
||
|
|
Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com>
|
||
|
|
Description:
|
||
|
|
Each regulator directory will contain a field called
|
||
|
|
type. This holds the regulator type.
|
||
|
|
|
||
|
|
This will be one of the following strings:
|
||
|
|
|
||
|
|
'voltage'
|
||
|
|
'current'
|
||
|
|
'unknown'
|
||
|
|
|
||
|
|
'voltage' means the regulator output voltage can be controlled
|
||
|
|
by software.
|
||
|
|
|
||
|
|
'current' means the regulator output current limit can be
|
||
|
|
controlled by software.
|
||
|
|
|
||
|
|
'unknown' means software cannot control either voltage or
|
||
|
|
current limit.
|
||
|
|
|
||
|
|
|
||
|
|
What: /sys/class/regulator/.../microvolts
|
||
|
|
Date: April 2008
|
||
|
|
KernelVersion: 2.6.26
|
||
|
|
Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com>
|
||
|
|
Description:
|
||
|
|
Each regulator directory will contain a field called
|
||
|
|
microvolts. This holds the regulator output voltage setting
|
||
|
|
measured in microvolts (i.e. E-6 Volts).
|
||
|
|
|
||
|
|
NOTE: This value should not be used to determine the regulator
|
||
|
|
output voltage level as this value is the same regardless of
|
||
|
|
whether the regulator is enabled or disabled.
|
||
|
|
|
||
|
|
|
||
|
|
What: /sys/class/regulator/.../microamps
|
||
|
|
Date: April 2008
|
||
|
|
KernelVersion: 2.6.26
|
||
|
|
Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com>
|
||
|
|
Description:
|
||
|
|
Each regulator directory will contain a field called
|
||
|
|
microamps. This holds the regulator output current limit
|
||
|
|
setting measured in microamps (i.e. E-6 Amps).
|
||
|
|
|
||
|
|
NOTE: This value should not be used to determine the regulator
|
||
|
|
output current level as this value is the same regardless of
|
||
|
|
whether the regulator is enabled or disabled.
|
||
|
|
|
||
|
|
|
||
|
|
What: /sys/class/regulator/.../opmode
|
||
|
|
Date: April 2008
|
||
|
|
KernelVersion: 2.6.26
|
||
|
|
Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com>
|
||
|
|
Description:
|
||
|
|
Each regulator directory will contain a field called
|
||
|
|
opmode. This holds the regulator operating mode setting.
|
||
|
|
|
||
|
|
The opmode value can be one of the following strings:
|
||
|
|
|
||
|
|
'fast'
|
||
|
|
'normal'
|
||
|
|
'idle'
|
||
|
|
'standby'
|
||
|
|
'unknown'
|
||
|
|
|
||
|
|
The modes are described in include/linux/regulator/regulator.h
|
||
|
|
|
||
|
|
NOTE: This value should not be used to determine the regulator
|
||
|
|
output operating mode as this value is the same regardless of
|
||
|
|
whether the regulator is enabled or disabled.
|
||
|
|
|
||
|
|
|
||
|
|
What: /sys/class/regulator/.../min_microvolts
|
||
|
|
Date: April 2008
|
||
|
|
KernelVersion: 2.6.26
|
||
|
|
Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com>
|
||
|
|
Description:
|
||
|
|
Each regulator directory will contain a field called
|
||
|
|
min_microvolts. This holds the minimum safe working regulator
|
||
|
|
output voltage setting for this domain measured in microvolts.
|
||
|
|
|
||
|
|
NOTE: this will return the string 'constraint not defined' if
|
||
|
|
the power domain has no min microvolts constraint defined by
|
||
|
|
platform code.
|
||
|
|
|
||
|
|
|
||
|
|
What: /sys/class/regulator/.../max_microvolts
|
||
|
|
Date: April 2008
|
||
|
|
KernelVersion: 2.6.26
|
||
|
|
Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com>
|
||
|
|
Description:
|
||
|
|
Each regulator directory will contain a field called
|
||
|
|
max_microvolts. This holds the maximum safe working regulator
|
||
|
|
output voltage setting for this domain measured in microvolts.
|
||
|
|
|
||
|
|
NOTE: this will return the string 'constraint not defined' if
|
||
|
|
the power domain has no max microvolts constraint defined by
|
||
|
|
platform code.
|
||
|
|
|
||
|
|
|
||
|
|
What: /sys/class/regulator/.../min_microamps
|
||
|
|
Date: April 2008
|
||
|
|
KernelVersion: 2.6.26
|
||
|
|
Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com>
|
||
|
|
Description:
|
||
|
|
Each regulator directory will contain a field called
|
||
|
|
min_microamps. This holds the minimum safe working regulator
|
||
|
|
output current limit setting for this domain measured in
|
||
|
|
microamps.
|
||
|
|
|
||
|
|
NOTE: this will return the string 'constraint not defined' if
|
||
|
|
the power domain has no min microamps constraint defined by
|
||
|
|
platform code.
|
||
|
|
|
||
|
|
|
||
|
|
What: /sys/class/regulator/.../max_microamps
|
||
|
|
Date: April 2008
|
||
|
|
KernelVersion: 2.6.26
|
||
|
|
Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com>
|
||
|
|
Description:
|
||
|
|
Each regulator directory will contain a field called
|
||
|
|
max_microamps. This holds the maximum safe working regulator
|
||
|
|
output current limit setting for this domain measured in
|
||
|
|
microamps.
|
||
|
|
|
||
|
|
NOTE: this will return the string 'constraint not defined' if
|
||
|
|
the power domain has no max microamps constraint defined by
|
||
|
|
platform code.
|
||
|
|
|
||
|
|
|
||
|
|
What: /sys/class/regulator/.../num_users
|
||
|
|
Date: April 2008
|
||
|
|
KernelVersion: 2.6.26
|
||
|
|
Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com>
|
||
|
|
Description:
|
||
|
|
Each regulator directory will contain a field called
|
||
|
|
num_users. This holds the number of consumer devices that
|
||
|
|
have called regulator_enable() on this regulator.
|
||
|
|
|
||
|
|
|
||
|
|
What: /sys/class/regulator/.../requested_microamps
|
||
|
|
Date: April 2008
|
||
|
|
KernelVersion: 2.6.26
|
||
|
|
Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com>
|
||
|
|
Description:
|
||
|
|
Each regulator directory will contain a field called
|
||
|
|
requested_microamps. This holds the total requested load
|
||
|
|
current in microamps for this regulator from all its consumer
|
||
|
|
devices.
|
||
|
|
|
||
|
|
|
||
|
|
What: /sys/class/regulator/.../parent
|
||
|
|
Date: April 2008
|
||
|
|
KernelVersion: 2.6.26
|
||
|
|
Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com>
|
||
|
|
Description:
|
||
|
|
Some regulator directories will contain a link called parent.
|
||
|
|
This points to the parent or supply regulator if one exists.
|
||
|
|
|
||
|
|
What: /sys/class/regulator/.../suspend_mem_microvolts
|
||
|
|
Date: May 2008
|
||
|
|
KernelVersion: 2.6.26
|
||
|
|
Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com>
|
||
|
|
Description:
|
||
|
|
Each regulator directory will contain a field called
|
||
|
|
suspend_mem_microvolts. This holds the regulator output
|
||
|
|
voltage setting for this domain measured in microvolts when
|
||
|
|
the system is suspended to memory.
|
||
|
|
|
||
|
|
NOTE: this will return the string 'not defined' if
|
||
|
|
the power domain has no suspend to memory voltage defined by
|
||
|
|
platform code.
|
||
|
|
|
||
|
|
What: /sys/class/regulator/.../suspend_disk_microvolts
|
||
|
|
Date: May 2008
|
||
|
|
KernelVersion: 2.6.26
|
||
|
|
Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com>
|
||
|
|
Description:
|
||
|
|
Each regulator directory will contain a field called
|
||
|
|
suspend_disk_microvolts. This holds the regulator output
|
||
|
|
voltage setting for this domain measured in microvolts when
|
||
|
|
the system is suspended to disk.
|
||
|
|
|
||
|
|
NOTE: this will return the string 'not defined' if
|
||
|
|
the power domain has no suspend to disk voltage defined by
|
||
|
|
platform code.
|
||
|
|
|
||
|
|
What: /sys/class/regulator/.../suspend_standby_microvolts
|
||
|
|
Date: May 2008
|
||
|
|
KernelVersion: 2.6.26
|
||
|
|
Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com>
|
||
|
|
Description:
|
||
|
|
Each regulator directory will contain a field called
|
||
|
|
suspend_standby_microvolts. This holds the regulator output
|
||
|
|
voltage setting for this domain measured in microvolts when
|
||
|
|
the system is suspended to standby.
|
||
|
|
|
||
|
|
NOTE: this will return the string 'not defined' if
|
||
|
|
the power domain has no suspend to standby voltage defined by
|
||
|
|
platform code.
|
||
|
|
|
||
|
|
What: /sys/class/regulator/.../suspend_mem_mode
|
||
|
|
Date: May 2008
|
||
|
|
KernelVersion: 2.6.26
|
||
|
|
Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com>
|
||
|
|
Description:
|
||
|
|
Each regulator directory will contain a field called
|
||
|
|
suspend_mem_mode. This holds the regulator operating mode
|
||
|
|
setting for this domain when the system is suspended to
|
||
|
|
memory.
|
||
|
|
|
||
|
|
NOTE: this will return the string 'not defined' if
|
||
|
|
the power domain has no suspend to memory mode defined by
|
||
|
|
platform code.
|
||
|
|
|
||
|
|
What: /sys/class/regulator/.../suspend_disk_mode
|
||
|
|
Date: May 2008
|
||
|
|
KernelVersion: 2.6.26
|
||
|
|
Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com>
|
||
|
|
Description:
|
||
|
|
Each regulator directory will contain a field called
|
||
|
|
suspend_disk_mode. This holds the regulator operating mode
|
||
|
|
setting for this domain when the system is suspended to disk.
|
||
|
|
|
||
|
|
NOTE: this will return the string 'not defined' if
|
||
|
|
the power domain has no suspend to disk mode defined by
|
||
|
|
platform code.
|
||
|
|
|
||
|
|
What: /sys/class/regulator/.../suspend_standby_mode
|
||
|
|
Date: May 2008
|
||
|
|
KernelVersion: 2.6.26
|
||
|
|
Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com>
|
||
|
|
Description:
|
||
|
|
Each regulator directory will contain a field called
|
||
|
|
suspend_standby_mode. This holds the regulator operating mode
|
||
|
|
setting for this domain when the system is suspended to
|
||
|
|
standby.
|
||
|
|
|
||
|
|
NOTE: this will return the string 'not defined' if
|
||
|
|
the power domain has no suspend to standby mode defined by
|
||
|
|
platform code.
|
||
|
|
|
||
|
|
What: /sys/class/regulator/.../suspend_mem_state
|
||
|
|
Date: May 2008
|
||
|
|
KernelVersion: 2.6.26
|
||
|
|
Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com>
|
||
|
|
Description:
|
||
|
|
Each regulator directory will contain a field called
|
||
|
|
suspend_mem_state. This holds the regulator operating state
|
||
|
|
when suspended to memory.
|
||
|
|
|
||
|
|
This will be one of the following strings:
|
||
|
|
|
||
|
|
'enabled'
|
||
|
|
'disabled'
|
||
|
|
'not defined'
|
||
|
|
|
||
|
|
What: /sys/class/regulator/.../suspend_disk_state
|
||
|
|
Date: May 2008
|
||
|
|
KernelVersion: 2.6.26
|
||
|
|
Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com>
|
||
|
|
Description:
|
||
|
|
Each regulator directory will contain a field called
|
||
|
|
suspend_disk_state. This holds the regulator operating state
|
||
|
|
when suspended to disk.
|
||
|
|
|
||
|
|
This will be one of the following strings:
|
||
|
|
|
||
|
|
'enabled'
|
||
|
|
'disabled'
|
||
|
|
'not defined'
|
||
|
|
|
||
|
|
What: /sys/class/regulator/.../suspend_standby_state
|
||
|
|
Date: May 2008
|
||
|
|
KernelVersion: 2.6.26
|
||
|
|
Contact: Liam Girdwood <lg@opensource.wolfsonmicro.com>
|
||
|
|
Description:
|
||
|
|
Each regulator directory will contain a field called
|
||
|
|
suspend_standby_state. This holds the regulator operating
|
||
|
|
state when suspended to standby.
|
||
|
|
|
||
|
|
This will be one of the following strings:
|
||
|
|
|
||
|
|
'enabled'
|
||
|
|
'disabled'
|
||
|
|
'not defined'
|