hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
linux-sg2042/net/bridge/br_private.h

782 lines
22 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* Linux ethernet bridge
*
* Authors:
* Lennert Buytenhek <buytenh@gnu.org>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#ifndef _BR_PRIVATE_H
#define _BR_PRIVATE_H
#include <linux/netdevice.h>
#include <linux/if_bridge.h>
bridge: Fix netpoll support There are multiple problems with the newly added netpoll support: 1) Use-after-free on each netpoll packet. 2) Invoking unsafe code on netpoll/IRQ path. 3) Breaks when netpoll is enabled on the underlying device. This patch fixes all of these problems. In particular, we now allocate proper netpoll structures for each underlying device. We only allow netpoll to be enabled on the bridge when all the devices underneath it support netpoll. Once it is enabled, we do not allow non-netpoll devices to join the bridge (until netpoll is disabled again). This allows us to do away with the npinfo juggling that caused problem number 1. Incidentally this patch fixes number 2 by bypassing unsafe code such as multicast snooping and netfilter. Reported-by: Qianfeng Zhang <frzhang@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-11 00:12:50 +08:00
#include <linux/netpoll.h>
bridge: 64bit rx/tx counters Use u64_stats_sync infrastructure to provide 64bit rx/tx counters even on 32bit hosts. It is safe to use a single u64_stats_sync for rx and tx, because BH is disabled on both, and we use per_cpu data. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-24 04:00:48 +08:00
#include <linux/u64_stats_sync.h>
bridge: send correct MTU value in PMTU (revised) When bridging interfaces with different MTUs, the bridge correctly chooses the minimum of the MTUs of the physical devices as the bridges MTU. But when a frame is passed which fits through the incoming, but not through the outgoing interface, a "Fragmentation Needed" packet is generated. However, the propagated MTU is hardcoded to 1500, which is wrong in this situation. The sender will repeat the packet again with the same frame size, and the same problem will occur again. Instead of sending 1500, the (correct) MTU value of the bridge is now sent via PMTU. To achieve this, the corresponding rtable structure is stored in its net_bridge structure. Modified to get rid of fake_net_device as well. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-31 07:27:55 +08:00
#include <net/route.h>
bridge: Add vlan filtering infrastructure Adds an optional infrustructure component to bridge that would allow native vlan filtering in the bridge. Each bridge port (as well as the bridge device) now get a VLAN bitmap. Each bit in the bitmap is associated with a vlan id. This way if the bit corresponding to the vid is set in the bitmap that the packet with vid is allowed to enter and exit the port. Write access the bitmap is protected by RTNL and read access protected by RCU. Vlan functionality is disabled by default. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:09 +08:00
#include <linux/if_vlan.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define BR_HASH_BITS 8
#define BR_HASH_SIZE (1 << BR_HASH_BITS)
#define BR_HOLD_TIME (1*HZ)
#define BR_PORT_BITS 10
#define BR_MAX_PORTS (1<<BR_PORT_BITS)
bridge: Add vlan filtering infrastructure Adds an optional infrustructure component to bridge that would allow native vlan filtering in the bridge. Each bridge port (as well as the bridge device) now get a VLAN bitmap. Each bit in the bitmap is associated with a vlan id. This way if the bit corresponding to the vid is set in the bitmap that the packet with vid is allowed to enter and exit the port. Write access the bitmap is protected by RTNL and read access protected by RCU. Vlan functionality is disabled by default. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:09 +08:00
#define BR_VLAN_BITMAP_LEN BITS_TO_LONGS(VLAN_N_VID)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bridge: add support for user mode STP This patchset based on work by Aji_Srinivas@emc.com provides allows spanning tree to be controled from userspace. Like hotplug, it uses call_usermodehelper when spanning tree is enabled so there is no visible API change. If call to start usermode STP fails it falls back to existing kernel STP. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
2007-03-22 05:22:44 +08:00
#define BR_VERSION "2.3"
bridge: allow forwarding some link local frames This is based on an earlier patch by Nick Carter with comments by David Lamparter but with some refinements. Thanks for their patience this is a confusing area with overlap of standards, user requirements, and compatibility with earlier releases. It adds a new sysfs attribute /sys/class/net/brX/bridge/group_fwd_mask that controls forwarding of frames with address of: 01-80-C2-00-00-0X The default setting has no forwarding to retain compatibility. One change from earlier releases is that forwarding of group addresses is not dependent on STP being enabled or disabled. This choice was made based on interpretation of tie 802.1 standards. I expect complaints will arise because of this, but better to follow the standard than continue acting incorrectly by default. The filtering mask is writeable, but only values that don't forward known control frames are allowed. It intentionally blocks attempts to filter control protocols. For example: writing a 8 allows forwarding 802.1X PAE addresses which is the most common request. Reported-by: David Lamparter <equinox@diac24.net> Original-patch-by: Nick Carter <ncarter100@gmail.com> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Tested-by: Benjamin Poirier <benjamin.poirier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-04 02:14:46 +08:00
/* Control of forwarding link local multicast */
#define BR_GROUPFWD_DEFAULT 0
/* Don't allow forwarding control protocols like STP and LLDP */
#define BR_GROUPFWD_RESTRICTED 0x4007u
bridge: add support for user mode STP This patchset based on work by Aji_Srinivas@emc.com provides allows spanning tree to be controled from userspace. Like hotplug, it uses call_usermodehelper when spanning tree is enabled so there is no visible API change. If call to start usermode STP fails it falls back to existing kernel STP. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
2007-03-22 05:22:44 +08:00
/* Path to usermode spanning tree program */
#define BR_STP_PROG "/sbin/bridge-stp"
[BRIDGE]: add version number Add version info to bridge module. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-22 11:01:30 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
typedef struct bridge_id bridge_id;
typedef struct mac_addr mac_addr;
typedef __u16 port_id;
struct bridge_id
{
unsigned char prio[2];
unsigned char addr[6];
};
struct mac_addr
{
unsigned char addr[6];
};
bridge br_multicast: Make functions less ipv4 dependent. Introduce struct br_ip{} to store ip address and protocol and make functions more generic so that we can support both IPv4 and IPv6 with less pain. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2010-04-18 11:42:07 +08:00
struct br_ip
{
union {
__be32 ip4;
net: use IS_ENABLED(CONFIG_IPV6) Instead of testing defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-10 17:48:31 +08:00
#if IS_ENABLED(CONFIG_IPV6)
bridge br_multicast: IPv6 MLD support. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2010-04-23 00:54:22 +08:00
struct in6_addr ip6;
#endif
bridge br_multicast: Make functions less ipv4 dependent. Introduce struct br_ip{} to store ip address and protocol and make functions more generic so that we can support both IPv4 and IPv6 with less pain. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2010-04-18 11:42:07 +08:00
} u;
__be16 proto;
bridge: Add vlan id to multicast groups Add vlan_id to multicasts groups so that we know which vlan each group belongs to and can correctly forward to appropriate vlan. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:17 +08:00
__u16 vid;
bridge br_multicast: Make functions less ipv4 dependent. Introduce struct br_ip{} to store ip address and protocol and make functions more generic so that we can support both IPv4 and IPv6 with less pain. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2010-04-18 11:42:07 +08:00
};
bridge: Add vlan filtering infrastructure Adds an optional infrustructure component to bridge that would allow native vlan filtering in the bridge. Each bridge port (as well as the bridge device) now get a VLAN bitmap. Each bit in the bitmap is associated with a vlan id. This way if the bit corresponding to the vid is set in the bitmap that the packet with vid is allowed to enter and exit the port. Write access the bitmap is protected by RTNL and read access protected by RCU. Vlan functionality is disabled by default. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:09 +08:00
struct net_port_vlans {
u16 port_idx;
bridge: Implement vlan ingress/egress policy with PVID. At ingress, any untagged traffic is assigned to the PVID. Any tagged traffic is filtered according to membership bitmap. At egress, if the vlan matches the PVID, the frame is sent untagged. Otherwise the frame is sent tagged. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:14 +08:00
u16 pvid;
bridge: Add vlan filtering infrastructure Adds an optional infrustructure component to bridge that would allow native vlan filtering in the bridge. Each bridge port (as well as the bridge device) now get a VLAN bitmap. Each bit in the bitmap is associated with a vlan id. This way if the bit corresponding to the vid is set in the bitmap that the packet with vid is allowed to enter and exit the port. Write access the bitmap is protected by RTNL and read access protected by RCU. Vlan functionality is disabled by default. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:09 +08:00
union {
struct net_bridge_port *port;
struct net_bridge *br;
} parent;
struct rcu_head rcu;
unsigned long vlan_bitmap[BR_VLAN_BITMAP_LEN];
bridge: Separate egress policy bitmap Add an ability to configure a separate "untagged" egress policy to the VLAN information of the bridge. This superseeds PVID policy and makes PVID ingress-only. The policy is configured with a new flag and is represented as a port bitmap per vlan. Egress frames with a VLAN id in "untagged" policy bitmap would egress the port without VLAN header. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:20 +08:00
unsigned long untagged_bitmap[BR_VLAN_BITMAP_LEN];
bridge: Dump vlan information from a bridge port Using the RTM_GETLINK dump the vlan filter list of a given bridge port. The information depends on setting the filter flag similar to how nic VF info is dumped. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:13 +08:00
u16 num_vlans;
bridge: Add vlan filtering infrastructure Adds an optional infrustructure component to bridge that would allow native vlan filtering in the bridge. Each bridge port (as well as the bridge device) now get a VLAN bitmap. Each bit in the bitmap is associated with a vlan id. This way if the bit corresponding to the vid is set in the bitmap that the packet with vid is allowed to enter and exit the port. Write access the bitmap is protected by RTNL and read access protected by RCU. Vlan functionality is disabled by default. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:09 +08:00
};
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct net_bridge_fdb_entry
{
struct hlist_node hlist;
struct net_bridge_port *dst;
struct rcu_head rcu;
bridge: track last used time in forwarding table Adds tracking the last used time in forwarding table. Rename ageing_timer to updated to better describe it. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-04 22:03:28 +08:00
unsigned long updated;
unsigned long used;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
mac_addr addr;
unsigned char is_local;
unsigned char is_static;
bridge: Add vlan to unicast fdb entries This patch adds vlan to unicast fdb entries that are created for learned addresses (not the manually configured ones). It adds vlan id into the hash mix and uses vlan as an addditional parameter for an entry match. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:16 +08:00
__u16 vlan_id;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
};
bridge: Add core IGMP snooping support This patch adds the core functionality of IGMP snooping support without actually hooking it up. So this patch should be a no-op as far as the bridge's external behaviour is concerned. All the new code and data is controlled by the Kconfig option BRIDGE_IGMP_SNOOPING. A run-time toggle is also available. The multicast switching is done using an hash table that is lockless on the read-side through RCU. On the write-side the new multicast_lock is used for all operations. The hash table supports dynamic growth/rehashing. The hash table will be rehashed if any chain length exceeds a preset limit. If rehashing does not reduce the maximum chain length then snooping will be disabled. These features may be added in future (in no particular order): * IGMPv3 source support * Non-querier router detection * IPv6 Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28 03:41:45 +08:00
struct net_bridge_port_group {
struct net_bridge_port *port;
bridge: add RCU annotation to bridge multicast table Add modern __rcu annotatations to bridge multicast table. Use newer hlist macros to avoid direct access to hlist internals. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-15 14:38:10 +08:00
struct net_bridge_port_group __rcu *next;
bridge: Add core IGMP snooping support This patch adds the core functionality of IGMP snooping support without actually hooking it up. So this patch should be a no-op as far as the bridge's external behaviour is concerned. All the new code and data is controlled by the Kconfig option BRIDGE_IGMP_SNOOPING. A run-time toggle is also available. The multicast switching is done using an hash table that is lockless on the read-side through RCU. On the write-side the new multicast_lock is used for all operations. The hash table supports dynamic growth/rehashing. The hash table will be rehashed if any chain length exceeds a preset limit. If rehashing does not reduce the maximum chain length then snooping will be disabled. These features may be added in future (in no particular order): * IGMPv3 source support * Non-querier router detection * IPv6 Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28 03:41:45 +08:00
struct hlist_node mglist;
struct rcu_head rcu;
struct timer_list timer;
bridge br_multicast: Make functions less ipv4 dependent. Introduce struct br_ip{} to store ip address and protocol and make functions more generic so that we can support both IPv4 and IPv6 with less pain. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2010-04-18 11:42:07 +08:00
struct br_ip addr;
bridge: add flags to distinguish permanent mdb entires This patch adds a flag to each mdb entry, so that we can distinguish permanent entries with temporary entries. Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-15 06:09:51 +08:00
unsigned char state;
bridge: Add core IGMP snooping support This patch adds the core functionality of IGMP snooping support without actually hooking it up. So this patch should be a no-op as far as the bridge's external behaviour is concerned. All the new code and data is controlled by the Kconfig option BRIDGE_IGMP_SNOOPING. A run-time toggle is also available. The multicast switching is done using an hash table that is lockless on the read-side through RCU. On the write-side the new multicast_lock is used for all operations. The hash table supports dynamic growth/rehashing. The hash table will be rehashed if any chain length exceeds a preset limit. If rehashing does not reduce the maximum chain length then snooping will be disabled. These features may be added in future (in no particular order): * IGMPv3 source support * Non-querier router detection * IPv6 Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28 03:41:45 +08:00
};
struct net_bridge_mdb_entry
{
struct hlist_node hlist[2];
struct net_bridge *br;
bridge: add RCU annotation to bridge multicast table Add modern __rcu annotatations to bridge multicast table. Use newer hlist macros to avoid direct access to hlist internals. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-15 14:38:10 +08:00
struct net_bridge_port_group __rcu *ports;
bridge: Add core IGMP snooping support This patch adds the core functionality of IGMP snooping support without actually hooking it up. So this patch should be a no-op as far as the bridge's external behaviour is concerned. All the new code and data is controlled by the Kconfig option BRIDGE_IGMP_SNOOPING. A run-time toggle is also available. The multicast switching is done using an hash table that is lockless on the read-side through RCU. On the write-side the new multicast_lock is used for all operations. The hash table supports dynamic growth/rehashing. The hash table will be rehashed if any chain length exceeds a preset limit. If rehashing does not reduce the maximum chain length then snooping will be disabled. These features may be added in future (in no particular order): * IGMPv3 source support * Non-querier router detection * IPv6 Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28 03:41:45 +08:00
struct rcu_head rcu;
struct timer_list timer;
bridge br_multicast: Make functions less ipv4 dependent. Introduce struct br_ip{} to store ip address and protocol and make functions more generic so that we can support both IPv4 and IPv6 with less pain. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2010-04-18 11:42:07 +08:00
struct br_ip addr;
bridge: Replace mp->mglist hlist with a bool As it turns out we never need to walk through the list of multicast groups subscribed by the bridge interface itself (the only time we'd want to do that is when we shut down the bridge, in which case we simply walk through all multicast groups), we don't really need to keep an hlist for mp->mglist. This means that we can replace it with just a single bit to indicate whether the bridge interface is subscribed to a group. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-12 17:05:42 +08:00
bool mglist;
bridge: Add core IGMP snooping support This patch adds the core functionality of IGMP snooping support without actually hooking it up. So this patch should be a no-op as far as the bridge's external behaviour is concerned. All the new code and data is controlled by the Kconfig option BRIDGE_IGMP_SNOOPING. A run-time toggle is also available. The multicast switching is done using an hash table that is lockless on the read-side through RCU. On the write-side the new multicast_lock is used for all operations. The hash table supports dynamic growth/rehashing. The hash table will be rehashed if any chain length exceeds a preset limit. If rehashing does not reduce the maximum chain length then snooping will be disabled. These features may be added in future (in no particular order): * IGMPv3 source support * Non-querier router detection * IPv6 Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28 03:41:45 +08:00
};
struct net_bridge_mdb_htable
{
struct hlist_head *mhash;
struct rcu_head rcu;
struct net_bridge_mdb_htable *old;
u32 size;
u32 max;
u32 secret;
u32 ver;
};
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct net_bridge_port
{
struct net_bridge *br;
struct net_device *dev;
struct list_head list;
/* STP */
u8 priority;
u8 state;
u16 port_no;
unsigned char topology_change_ack;
unsigned char config_pending;
port_id port_id;
port_id designated_port;
bridge_id designated_root;
bridge_id designated_bridge;
u32 path_cost;
u32 designated_cost;
bridge: send proper message_age in config BPDU A bridge topology with three systems: +------+ +------+ | A(2) |--| B(1) | +------+ +------+ \ / +------+ | C(3) | +------+ What is supposed to happen: * bridge with the lowest ID is elected root (for example: B) * C detects that A->C is higher cost path and puts in blocking state What happens. Bridge with lowest id (B) is elected correctly as root and things start out fine initially. But then config BPDU doesn't get transmitted from A -> C. Because of that the link from A-C is transistioned to the forwarding state. The root cause of this is that the configuration messages is generated with bogus message age, and dropped before sending. In the standardmessage_age is supposed to be: the time since the generation of the Configuration BPDU by the Root that instigated the generation of this Configuration BPDU. Reimplement this by recording the timestamp (age + jiffies) when recording config information. The old code incorrectly used the time elapsed on the ageing timer which was incorrect. See also: https://bugzilla.vyatta.com/show_bug.cgi?id=7164 Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-22 15:47:06 +08:00
unsigned long designated_age;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct timer_list forward_delay_timer;
struct timer_list hold_timer;
struct timer_list message_age_timer;
struct kobject kobj;
struct rcu_head rcu;
net/bridge: Add 'hairpin' port forwarding mode This patch adds a 'hairpin' (also called 'reflective relay') mode port configuration to the Linux Ethernet bridge kernel module. A bridge supporting hairpin forwarding mode can send frames back out through the port the frame was received on. Hairpin mode is required to support basic VEPA (Virtual Ethernet Port Aggregator) capabilities. You can find additional information on VEPA here: http://tech.groups.yahoo.com/group/evb/ http://www.ieee802.org/1/files/public/docs2009/new-hudson-vepa_seminar-20090514d.pdf http://www.internet2.edu/presentations/jt2009jul/20090719-congdon.pdf An additional patch 'bridge-utils: Add 'hairpin' port forwarding mode' is provided to allow configuring hairpin mode from userspace tools. Signed-off-by: Paul Congdon <paul.congdon@hp.com> Signed-off-by: Anna Fischer <anna.fischer@hp.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13 14:55:16 +08:00
unsigned long flags;
#define BR_HAIRPIN_MODE 0x00000001
bridge: implement BPDU blocking This is Linux bridge implementation of STP protection (Cisco BPDU guard/Juniper BPDU block). BPDU block disables the bridge port if a STP BPDU packet is received. Why would you want to do this? If running Spanning Tree on bridge, hostile devices on the network may send BPDU and cause network failure. Enabling bpdu block will detect and stop this. How to recover the port? The port will be restarted if link is brought down, or removed and reattached. For example: # ip li set dev eth0 down; ip li set dev eth0 up Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-13 15:53:07 +08:00
#define BR_BPDU_GUARD 0x00000002
bridge: add root port blocking This is Linux bridge implementation of root port guard. If BPDU is received from a leaf (edge) port, it should not be elected as root port. Why would you want to do this? If using STP on a bridge and the downstream bridges are not fully trusted; this prevents a hostile guest for rerouting traffic. Why not just use netfilter? Netfilter does not track of follow spanning tree decisions. It would be difficult and error prone to try and mirror STP resolution in netfilter module. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-13 15:53:08 +08:00
#define BR_ROOT_BLOCK 0x00000004
bridge: implement multicast fast leave V3: make it a flag V2: make the toggle per-port Fast leave allows bridge to immediately stops the multicast traffic on the port receives IGMP Leave when IGMP snooping is enabled, no timeouts are observed. Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com>
2012-12-06 05:24:45 +08:00
#define BR_MULTICAST_FAST_LEAVE 0x00000008
bridge: make user modified path cost sticky Keep a STP port path cost value if it was set by a user. Don't replace it with the link-speed based path cost whenever the link goes down and comes back up. Reported-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-13 22:06:07 +08:00
#define BR_ADMIN_COST 0x00000010
bridge: Add core IGMP snooping support This patch adds the core functionality of IGMP snooping support without actually hooking it up. So this patch should be a no-op as far as the bridge's external behaviour is concerned. All the new code and data is controlled by the Kconfig option BRIDGE_IGMP_SNOOPING. A run-time toggle is also available. The multicast switching is done using an hash table that is lockless on the read-side through RCU. On the write-side the new multicast_lock is used for all operations. The hash table supports dynamic growth/rehashing. The hash table will be rehashed if any chain length exceeds a preset limit. If rehashing does not reduce the maximum chain length then snooping will be disabled. These features may be added in future (in no particular order): * IGMPv3 source support * Non-querier router detection * IPv6 Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28 03:41:45 +08:00
#ifdef CONFIG_BRIDGE_IGMP_SNOOPING
u32 multicast_startup_queries_sent;
unsigned char multicast_router;
struct timer_list multicast_router_timer;
struct timer_list multicast_query_timer;
struct hlist_head mglist;
struct hlist_node rlist;
#endif
bridge: update sysfs link names if port device names have changed Links for each port are created in sysfs using the device name, but this could be changed after being added to the bridge. As well as being unable to remove interfaces after this occurs (because userspace tools don't recognise the new name, and the kernel won't recognise the old name), adding another interface with the old name to the bridge will cause an error trying to create the sysfs link. This fixes the problem by listening for NETDEV_CHANGENAME notifications and renaming the link. https://bugzilla.kernel.org/show_bug.cgi?id=12743 Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-10 17:31:11 +08:00
#ifdef CONFIG_SYSFS
char sysfs_name[IFNAMSIZ];
#endif
bridge: Fix netpoll support There are multiple problems with the newly added netpoll support: 1) Use-after-free on each netpoll packet. 2) Invoking unsafe code on netpoll/IRQ path. 3) Breaks when netpoll is enabled on the underlying device. This patch fixes all of these problems. In particular, we now allocate proper netpoll structures for each underlying device. We only allow netpoll to be enabled on the bridge when all the devices underneath it support netpoll. Once it is enabled, we do not allow non-netpoll devices to join the bridge (until netpoll is disabled again). This allows us to do away with the npinfo juggling that caused problem number 1. Incidentally this patch fixes number 2 by bypassing unsafe code such as multicast snooping and netfilter. Reported-by: Qianfeng Zhang <frzhang@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-11 00:12:50 +08:00
#ifdef CONFIG_NET_POLL_CONTROLLER
struct netpoll *np;
#endif
bridge: Add vlan filtering infrastructure Adds an optional infrustructure component to bridge that would allow native vlan filtering in the bridge. Each bridge port (as well as the bridge device) now get a VLAN bitmap. Each bit in the bitmap is associated with a vlan id. This way if the bit corresponding to the vid is set in the bitmap that the packet with vid is allowed to enter and exit the port. Write access the bitmap is protected by RTNL and read access protected by RCU. Vlan functionality is disabled by default. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:09 +08:00
#ifdef CONFIG_BRIDGE_VLAN_FILTERING
struct net_port_vlans __rcu *vlan_info;
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
};
bridge: use rx_handler_data pointer to store net_bridge_port pointer Register net_bridge_port pointer as rx_handler data pointer. As br_port is removed from struct net_device, another netdev priv_flag is added to indicate the device serves as a bridge port. Also rcuized pointers are now correctly dereferenced in br_fdb.c and in netfilter parts. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-15 14:50:45 +08:00
#define br_port_exists(dev) (dev->priv_flags & IFF_BRIDGE_PORT)
bridge: fix RCU races with bridge port The macro br_port_exists() is not enough protection when only RCU is being used. There is a tiny race where other CPU has cleared port handler hook, but is bridge port flag might still be set. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-15 14:38:13 +08:00
static inline struct net_bridge_port *br_port_get_rcu(const struct net_device *dev)
{
net: set and query VEB/VEPA bridge mode via PF_BRIDGE Hardware switches may support enabling and disabling the loopback switch which puts the device in a VEPA mode defined in the IEEE 802.1Qbg specification. In this mode frames are not switched in the hardware but sent directly to the switch. SR-IOV capable NICs will likely support this mode I am aware of at least two such devices. Also I am told (but don't have any of this hardware available) that there are devices that only support VEPA modes. In these cases it is important at a minimum to be able to query these attributes. This patch adds an additional IFLA_BRIDGE_MODE attribute that can be set and dumped via the PF_BRIDGE:{SET|GET}LINK operations. Also anticipating bridge attributes that may be common for both embedded bridges and software bridges this adds a flags attribute IFLA_BRIDGE_FLAGS currently used to determine if the command or event is being generated to/from an embedded bridge or software bridge. Finally, the event generation is pulled out of the bridge module and into rtnetlink proper. For example using the macvlan driver in VEPA mode on top of an embedded switch requires putting the embedded switch into a VEPA mode to get the expected results. -------- -------- | VEPA | | VEPA | <-- macvlan vepa edge relays -------- -------- | | | | ------------------ | VEPA | <-- embedded switch in NIC ------------------ | | ------------------- | external switch | <-- shiny new physical ------------------- switch with VEPA support A packet sent from the macvlan VEPA at the top could be loopbacked on the embedded switch and never seen by the external switch. So in order for this to work the embedded switch needs to be set in the VEPA state via the above described commands. By making these attributes nested in IFLA_AF_SPEC we allow future extensions to be made as needed. CC: Lennert Buytenhek <buytenh@wantstofly.org> CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-24 16:13:03 +08:00
struct net_bridge_port *port =
rcu_dereference_rtnl(dev->rx_handler_data);
bridge: fix RCU races with bridge port The macro br_port_exists() is not enough protection when only RCU is being used. There is a tiny race where other CPU has cleared port handler hook, but is bridge port flag might still be set. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-15 14:38:13 +08:00
return br_port_exists(dev) ? port : NULL;
}
bridge: add RCU annotations to bridge port lookup br_port_get() renamed to br_port_get_rtnl() to make clear RTNL is held. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-15 14:38:14 +08:00
static inline struct net_bridge_port *br_port_get_rtnl(struct net_device *dev)
bridge: fix RCU races with bridge port The macro br_port_exists() is not enough protection when only RCU is being used. There is a tiny race where other CPU has cleared port handler hook, but is bridge port flag might still be set. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-15 14:38:13 +08:00
{
bridge: add RCU annotations to bridge port lookup br_port_get() renamed to br_port_get_rtnl() to make clear RTNL is held. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-15 14:38:14 +08:00
return br_port_exists(dev) ?
rtnl_dereference(dev->rx_handler_data) : NULL;
bridge: fix RCU races with bridge port The macro br_port_exists() is not enough protection when only RCU is being used. There is a tiny race where other CPU has cleared port handler hook, but is bridge port flag might still be set. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-15 14:38:13 +08:00
}
net: Fix various endianness glitches Sparse can help us find endianness bugs, but we need to make some cleanups to be able to more easily spot real bugs. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-21 10:06:52 +08:00
struct br_cpu_netstats {
bridge: 64bit rx/tx counters Use u64_stats_sync infrastructure to provide 64bit rx/tx counters even on 32bit hosts. It is safe to use a single u64_stats_sync for rx and tx, because BH is disabled on both, and we use per_cpu data. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-24 04:00:48 +08:00
u64 rx_packets;
u64 rx_bytes;
u64 tx_packets;
u64 tx_bytes;
struct u64_stats_sync syncp;
net: Fix various endianness glitches Sparse can help us find endianness bugs, but we need to make some cleanups to be able to more easily spot real bugs. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-21 10:06:52 +08:00
};
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct net_bridge
{
spinlock_t lock;
struct list_head port_list;
struct net_device *dev;
bridge: per-cpu packet statistics (v3) The shared packet statistics are a potential source of slow down on bridged traffic. Convert to per-cpu array, but only keep those statistics which change per-packet. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-02 21:32:09 +08:00
net: Fix various endianness glitches Sparse can help us find endianness bugs, but we need to make some cleanups to be able to more easily spot real bugs. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-21 10:06:52 +08:00
struct br_cpu_netstats __percpu *stats;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
spinlock_t hash_lock;
struct hlist_head hash[BR_HASH_SIZE];
bridge: send correct MTU value in PMTU (revised) When bridging interfaces with different MTUs, the bridge correctly chooses the minimum of the MTUs of the physical devices as the bridges MTU. But when a frame is passed which fits through the incoming, but not through the outgoing interface, a "Fragmentation Needed" packet is generated. However, the propagated MTU is hardcoded to 1500, which is wrong in this situation. The sender will repeat the packet again with the same frame size, and the same problem will occur again. Instead of sending 1500, the (correct) MTU value of the bridge is now sent via PMTU. To achieve this, the corresponding rtable structure is stored in its net_bridge structure. Modified to get rid of fake_net_device as well. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-31 07:27:55 +08:00
#ifdef CONFIG_BRIDGE_NETFILTER
struct rtable fake_rtable;
bridge: add per bridge device controls for invoking iptables Support more fine grained control of bridge netfilter iptables invocation by adding seperate brnf_call_*tables parameters for each device using the sysfs interface. Packets are passed to layer 3 netfilter when either the global parameter or the per bridge parameter is enabled. Acked-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-07-02 15:32:57 +08:00
bool nf_call_iptables;
bool nf_call_ip6tables;
bool nf_call_arptables;
bridge: send correct MTU value in PMTU (revised) When bridging interfaces with different MTUs, the bridge correctly chooses the minimum of the MTUs of the physical devices as the bridges MTU. But when a frame is passed which fits through the incoming, but not through the outgoing interface, a "Fragmentation Needed" packet is generated. However, the propagated MTU is hardcoded to 1500, which is wrong in this situation. The sender will repeat the packet again with the same frame size, and the same problem will occur again. Instead of sending 1500, the (correct) MTU value of the bridge is now sent via PMTU. To achieve this, the corresponding rtable structure is stored in its net_bridge structure. Modified to get rid of fake_net_device as well. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-31 07:27:55 +08:00
#endif
bridge: allow forwarding some link local frames This is based on an earlier patch by Nick Carter with comments by David Lamparter but with some refinements. Thanks for their patience this is a confusing area with overlap of standards, user requirements, and compatibility with earlier releases. It adds a new sysfs attribute /sys/class/net/brX/bridge/group_fwd_mask that controls forwarding of frames with address of: 01-80-C2-00-00-0X The default setting has no forwarding to retain compatibility. One change from earlier releases is that forwarding of group addresses is not dependent on STP being enabled or disabled. This choice was made based on interpretation of tie 802.1 standards. I expect complaints will arise because of this, but better to follow the standard than continue acting incorrectly by default. The filtering mask is writeable, but only values that don't forward known control frames are allowed. It intentionally blocks attempts to filter control protocols. For example: writing a 8 allows forwarding 802.1X PAE addresses which is the most common request. Reported-by: David Lamparter <equinox@diac24.net> Original-patch-by: Nick Carter <ncarter100@gmail.com> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Tested-by: Benjamin Poirier <benjamin.poirier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-04 02:14:46 +08:00
u16 group_fwd_mask;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* STP */
bridge_id designated_root;
bridge_id bridge_id;
u32 root_path_cost;
unsigned long max_age;
unsigned long hello_time;
unsigned long forward_delay;
unsigned long bridge_max_age;
unsigned long ageing_time;
unsigned long bridge_hello_time;
unsigned long bridge_forward_delay;
[BRIDGE]: allow show/store of group multicast address Bridge's communicate with each other using Spanning Tree Protocol over a standard multicast address. There are times when testing or layering bridges over existing topologies or tunnels, when it is useful to use alternative multicast addresses for STP packets. The 802.1d standard has some unused addresses, that can be used for this. This patch is restrictive in that it only allows one of the possible addresses in the standard. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-21 14:59:21 +08:00
u8 group_addr[ETH_ALEN];
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
u16 root_port;
bridge: add support for user mode STP This patchset based on work by Aji_Srinivas@emc.com provides allows spanning tree to be controled from userspace. Like hotplug, it uses call_usermodehelper when spanning tree is enabled so there is no visible API change. If call to start usermode STP fails it falls back to existing kernel STP. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
2007-03-22 05:22:44 +08:00
enum {
BR_NO_STP, /* no spanning tree */
BR_KERNEL_STP, /* old STP in kernel */
BR_USER_STP, /* new RSTP in userspace */
} stp_enabled;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
unsigned char topology_change;
unsigned char topology_change_detected;
bridge: Add core IGMP snooping support This patch adds the core functionality of IGMP snooping support without actually hooking it up. So this patch should be a no-op as far as the bridge's external behaviour is concerned. All the new code and data is controlled by the Kconfig option BRIDGE_IGMP_SNOOPING. A run-time toggle is also available. The multicast switching is done using an hash table that is lockless on the read-side through RCU. On the write-side the new multicast_lock is used for all operations. The hash table supports dynamic growth/rehashing. The hash table will be rehashed if any chain length exceeds a preset limit. If rehashing does not reduce the maximum chain length then snooping will be disabled. These features may be added in future (in no particular order): * IGMPv3 source support * Non-querier router detection * IPv6 Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28 03:41:45 +08:00
#ifdef CONFIG_BRIDGE_IGMP_SNOOPING
unsigned char multicast_router;
u8 multicast_disabled:1;
bridge: Add multicast_querier toggle and disable queries by default Sending general queries was implemented as an optimisation to speed up convergence on start-up. In order to prevent interference with multicast routers a zero source address has to be used. Unfortunately these packets appear to cause some multicast-aware switches to misbehave, e.g., by disrupting multicast packets to us. Since the multicast snooping feature still functions without sending our own queries, this patch will change the default to not send queries. For those that need queries in order to speed up convergence on start-up, a toggle is provided to restore the previous behaviour. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-13 10:37:42 +08:00
u8 multicast_querier:1;
bridge: Add core IGMP snooping support This patch adds the core functionality of IGMP snooping support without actually hooking it up. So this patch should be a no-op as far as the bridge's external behaviour is concerned. All the new code and data is controlled by the Kconfig option BRIDGE_IGMP_SNOOPING. A run-time toggle is also available. The multicast switching is done using an hash table that is lockless on the read-side through RCU. On the write-side the new multicast_lock is used for all operations. The hash table supports dynamic growth/rehashing. The hash table will be rehashed if any chain length exceeds a preset limit. If rehashing does not reduce the maximum chain length then snooping will be disabled. These features may be added in future (in no particular order): * IGMPv3 source support * Non-querier router detection * IPv6 Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28 03:41:45 +08:00
u32 hash_elasticity;
u32 hash_max;
u32 multicast_last_member_count;
u32 multicast_startup_queries_sent;
u32 multicast_startup_query_count;
unsigned long multicast_last_member_interval;
unsigned long multicast_membership_interval;
unsigned long multicast_querier_interval;
unsigned long multicast_query_interval;
unsigned long multicast_query_response_interval;
unsigned long multicast_startup_query_interval;
spinlock_t multicast_lock;
bridge: add RCU annotation to bridge multicast table Add modern __rcu annotatations to bridge multicast table. Use newer hlist macros to avoid direct access to hlist internals. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-15 14:38:10 +08:00
struct net_bridge_mdb_htable __rcu *mdb;
bridge: Add core IGMP snooping support This patch adds the core functionality of IGMP snooping support without actually hooking it up. So this patch should be a no-op as far as the bridge's external behaviour is concerned. All the new code and data is controlled by the Kconfig option BRIDGE_IGMP_SNOOPING. A run-time toggle is also available. The multicast switching is done using an hash table that is lockless on the read-side through RCU. On the write-side the new multicast_lock is used for all operations. The hash table supports dynamic growth/rehashing. The hash table will be rehashed if any chain length exceeds a preset limit. If rehashing does not reduce the maximum chain length then snooping will be disabled. These features may be added in future (in no particular order): * IGMPv3 source support * Non-querier router detection * IPv6 Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28 03:41:45 +08:00
struct hlist_head router_list;
struct timer_list multicast_router_timer;
struct timer_list multicast_querier_timer;
struct timer_list multicast_query_timer;
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct timer_list hello_timer;
struct timer_list tcn_timer;
struct timer_list topology_change_timer;
struct timer_list gc_timer;
Kobject: change net/bridge to use kobject_create_and_add The kobject in the bridge code is only used for registering with sysfs, not for any lifespan rules. This patch changes it to be only a pointer and use the simpler api for this kind of thing. Cc: Stephen Hemminger <shemminger@linux-foundation.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-12-18 03:54:39 +08:00
struct kobject *ifobj;
bridge: Add vlan filtering infrastructure Adds an optional infrustructure component to bridge that would allow native vlan filtering in the bridge. Each bridge port (as well as the bridge device) now get a VLAN bitmap. Each bit in the bitmap is associated with a vlan id. This way if the bit corresponding to the vid is set in the bitmap that the packet with vid is allowed to enter and exit the port. Write access the bitmap is protected by RTNL and read access protected by RCU. Vlan functionality is disabled by default. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:09 +08:00
#ifdef CONFIG_BRIDGE_VLAN_FILTERING
u8 vlan_enabled;
struct net_port_vlans __rcu *vlan_info;
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
};
bridge: Allow tail-call on br_pass_frame_up This patch allows tail-call on the call to br_pass_frame_up in br_handle_frame_finish. This is now possible because of the previous patch to call br_pass_frame_up last. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28 03:41:40 +08:00
struct br_input_skb_cb {
struct net_device *brdev;
bridge br_multicast: Don't refer to BR_INPUT_SKB_CB(skb)->mrouters_only without IGMP snooping. Without CONFIG_BRIDGE_IGMP_SNOOPING, BR_INPUT_SKB_CB(skb)->mrouters_only is not appropriately initialized, so we can see garbage. A clear option to fix this is to set it even without that config, but we cannot optimize out the branch. Let's introduce a macro that returns value of mrouters_only and let it return 0 without CONFIG_BRIDGE_IGMP_SNOOPING. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-16 05:51:18 +08:00
#ifdef CONFIG_BRIDGE_IGMP_SNOOPING
bridge: Add core IGMP snooping support This patch adds the core functionality of IGMP snooping support without actually hooking it up. So this patch should be a no-op as far as the bridge's external behaviour is concerned. All the new code and data is controlled by the Kconfig option BRIDGE_IGMP_SNOOPING. A run-time toggle is also available. The multicast switching is done using an hash table that is lockless on the read-side through RCU. On the write-side the new multicast_lock is used for all operations. The hash table supports dynamic growth/rehashing. The hash table will be rehashed if any chain length exceeds a preset limit. If rehashing does not reduce the maximum chain length then snooping will be disabled. These features may be added in future (in no particular order): * IGMPv3 source support * Non-querier router detection * IPv6 Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28 03:41:45 +08:00
int igmp;
int mrouters_only;
bridge br_multicast: Don't refer to BR_INPUT_SKB_CB(skb)->mrouters_only without IGMP snooping. Without CONFIG_BRIDGE_IGMP_SNOOPING, BR_INPUT_SKB_CB(skb)->mrouters_only is not appropriately initialized, so we can see garbage. A clear option to fix this is to set it even without that config, but we cannot optimize out the branch. Let's introduce a macro that returns value of mrouters_only and let it return 0 without CONFIG_BRIDGE_IGMP_SNOOPING. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-16 05:51:18 +08:00
#endif
bridge: Allow tail-call on br_pass_frame_up This patch allows tail-call on the call to br_pass_frame_up in br_handle_frame_finish. This is now possible because of the previous patch to call br_pass_frame_up last. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28 03:41:40 +08:00
};
#define BR_INPUT_SKB_CB(__skb) ((struct br_input_skb_cb *)(__skb)->cb)
bridge br_multicast: Don't refer to BR_INPUT_SKB_CB(skb)->mrouters_only without IGMP snooping. Without CONFIG_BRIDGE_IGMP_SNOOPING, BR_INPUT_SKB_CB(skb)->mrouters_only is not appropriately initialized, so we can see garbage. A clear option to fix this is to set it even without that config, but we cannot optimize out the branch. Let's introduce a macro that returns value of mrouters_only and let it return 0 without CONFIG_BRIDGE_IGMP_SNOOPING. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-16 05:51:18 +08:00
#ifdef CONFIG_BRIDGE_IGMP_SNOOPING
# define BR_INPUT_SKB_CB_MROUTERS_ONLY(__skb) (BR_INPUT_SKB_CB(__skb)->mrouters_only)
#else
# define BR_INPUT_SKB_CB_MROUTERS_ONLY(__skb) (0)
#endif
bridge: change console message interface Use one set of macro's for all bridge messages. Note: can't use netdev_XXX macro's because bridge is purely virtual and has no device parent. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-10 17:31:09 +08:00
#define br_printk(level, br, format, args...) \
printk(level "%s: " format, (br)->dev->name, ##args)
#define br_err(__br, format, args...) \
br_printk(KERN_ERR, __br, format, ##args)
#define br_warn(__br, format, args...) \
br_printk(KERN_WARNING, __br, format, ##args)
#define br_notice(__br, format, args...) \
br_printk(KERN_NOTICE, __br, format, ##args)
#define br_info(__br, format, args...) \
br_printk(KERN_INFO, __br, format, ##args)
#define br_debug(br, format, args...) \
pr_debug("%s: " format, (br)->dev->name, ##args)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
extern struct notifier_block br_device_notifier;
/* called under bridge lock */
static inline int br_is_root_bridge(const struct net_bridge *br)
{
return !memcmp(&br->bridge_id, &br->designated_root, 8);
}
/* br_device.c */
extern void br_dev_setup(struct net_device *dev);
bridge: fix hang on removal of bridge via netlink Need to cleanup bridge device timers and ports when being bridge device is being removed via netlink. This fixes the problem of observed when doing: ip link add br0 type bridge ip link set dev eth1 master br0 ip link set br0 up ip link del br0 which would cause br0 to hang in unregister_netdev because of leftover reference count. Reported-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-06 19:19:41 +08:00
extern void br_dev_delete(struct net_device *dev, struct list_head *list);
netdev: convert pseudo-devices to netdev_tx_t Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01 03:50:41 +08:00
extern netdev_tx_t br_dev_xmit(struct sk_buff *skb,
struct net_device *dev);
bridge: netpoll cleanup Move code around so that the ifdef for NETPOLL_CONTROLLER don't have to show up in main code path. The control functions should be in helpers that are only compiled if needed. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-10 17:31:08 +08:00
#ifdef CONFIG_NET_POLL_CONTROLLER
bridge: Fix netpoll support There are multiple problems with the newly added netpoll support: 1) Use-after-free on each netpoll packet. 2) Invoking unsafe code on netpoll/IRQ path. 3) Breaks when netpoll is enabled on the underlying device. This patch fixes all of these problems. In particular, we now allocate proper netpoll structures for each underlying device. We only allow netpoll to be enabled on the bridge when all the devices underneath it support netpoll. Once it is enabled, we do not allow non-netpoll devices to join the bridge (until netpoll is disabled again). This allows us to do away with the npinfo juggling that caused problem number 1. Incidentally this patch fixes number 2 by bypassing unsafe code such as multicast snooping and netfilter. Reported-by: Qianfeng Zhang <frzhang@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-11 00:12:50 +08:00
static inline struct netpoll_info *br_netpoll_info(struct net_bridge *br)
{
return br->dev->npinfo;
}
static inline void br_netpoll_send_skb(const struct net_bridge_port *p,
struct sk_buff *skb)
{
struct netpoll *np = p->np;
if (np)
netpoll_send_skb(np, skb);
}
netpoll: use GFP_ATOMIC in slave_enable_netpoll() and __netpoll_setup() slave_enable_netpoll() and __netpoll_setup() may be called with read_lock() held, so should use GFP_ATOMIC to allocate memory. Eric suggested to pass gfp flags to __netpoll_setup(). Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-10 09:24:37 +08:00
extern int br_netpoll_enable(struct net_bridge_port *p, gfp_t gfp);
bridge: Fix netpoll support There are multiple problems with the newly added netpoll support: 1) Use-after-free on each netpoll packet. 2) Invoking unsafe code on netpoll/IRQ path. 3) Breaks when netpoll is enabled on the underlying device. This patch fixes all of these problems. In particular, we now allocate proper netpoll structures for each underlying device. We only allow netpoll to be enabled on the bridge when all the devices underneath it support netpoll. Once it is enabled, we do not allow non-netpoll devices to join the bridge (until netpoll is disabled again). This allows us to do away with the npinfo juggling that caused problem number 1. Incidentally this patch fixes number 2 by bypassing unsafe code such as multicast snooping and netfilter. Reported-by: Qianfeng Zhang <frzhang@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-11 00:12:50 +08:00
extern void br_netpoll_disable(struct net_bridge_port *p);
bridge: netpoll cleanup Move code around so that the ifdef for NETPOLL_CONTROLLER don't have to show up in main code path. The control functions should be in helpers that are only compiled if needed. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-10 17:31:08 +08:00
#else
bridge: Fix netpoll support There are multiple problems with the newly added netpoll support: 1) Use-after-free on each netpoll packet. 2) Invoking unsafe code on netpoll/IRQ path. 3) Breaks when netpoll is enabled on the underlying device. This patch fixes all of these problems. In particular, we now allocate proper netpoll structures for each underlying device. We only allow netpoll to be enabled on the bridge when all the devices underneath it support netpoll. Once it is enabled, we do not allow non-netpoll devices to join the bridge (until netpoll is disabled again). This allows us to do away with the npinfo juggling that caused problem number 1. Incidentally this patch fixes number 2 by bypassing unsafe code such as multicast snooping and netfilter. Reported-by: Qianfeng Zhang <frzhang@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-11 00:12:50 +08:00
static inline struct netpoll_info *br_netpoll_info(struct net_bridge *br)
{
return NULL;
}
bridge: Add const to dummy br_netpoll_send_skb The version of br_netpoll_send_skb used when netpoll is off is missing a const thus causing a warning. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-16 12:43:48 +08:00
static inline void br_netpoll_send_skb(const struct net_bridge_port *p,
bridge: Fix netpoll support There are multiple problems with the newly added netpoll support: 1) Use-after-free on each netpoll packet. 2) Invoking unsafe code on netpoll/IRQ path. 3) Breaks when netpoll is enabled on the underlying device. This patch fixes all of these problems. In particular, we now allocate proper netpoll structures for each underlying device. We only allow netpoll to be enabled on the bridge when all the devices underneath it support netpoll. Once it is enabled, we do not allow non-netpoll devices to join the bridge (until netpoll is disabled again). This allows us to do away with the npinfo juggling that caused problem number 1. Incidentally this patch fixes number 2 by bypassing unsafe code such as multicast snooping and netfilter. Reported-by: Qianfeng Zhang <frzhang@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-11 00:12:50 +08:00
struct sk_buff *skb)
{
}
bridge: netpoll cleanup Move code around so that the ifdef for NETPOLL_CONTROLLER don't have to show up in main code path. The control functions should be in helpers that are only compiled if needed. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-10 17:31:08 +08:00
netpoll: use GFP_ATOMIC in slave_enable_netpoll() and __netpoll_setup() slave_enable_netpoll() and __netpoll_setup() may be called with read_lock() held, so should use GFP_ATOMIC to allocate memory. Eric suggested to pass gfp flags to __netpoll_setup(). Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-10 09:24:37 +08:00
static inline int br_netpoll_enable(struct net_bridge_port *p, gfp_t gfp)
bridge: Fix netpoll support There are multiple problems with the newly added netpoll support: 1) Use-after-free on each netpoll packet. 2) Invoking unsafe code on netpoll/IRQ path. 3) Breaks when netpoll is enabled on the underlying device. This patch fixes all of these problems. In particular, we now allocate proper netpoll structures for each underlying device. We only allow netpoll to be enabled on the bridge when all the devices underneath it support netpoll. Once it is enabled, we do not allow non-netpoll devices to join the bridge (until netpoll is disabled again). This allows us to do away with the npinfo juggling that caused problem number 1. Incidentally this patch fixes number 2 by bypassing unsafe code such as multicast snooping and netfilter. Reported-by: Qianfeng Zhang <frzhang@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-06-11 00:12:50 +08:00
{
return 0;
}
static inline void br_netpoll_disable(struct net_bridge_port *p)
{
}
bridge: netpoll cleanup Move code around so that the ifdef for NETPOLL_CONTROLLER don't have to show up in main code path. The control functions should be in helpers that are only compiled if needed. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-10 17:31:08 +08:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* br_fdb.c */
bridge: check kmem_cache_create() error This patch checks kmem_cache_create() error and aborts loading module on failure. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
2007-04-07 17:57:07 +08:00
extern int br_fdb_init(void);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
extern void br_fdb_fini(void);
bridge: add sysfs hook to flush forwarding table The RSTP daemon needs to be able to flush all dynamic forwarding entries in the case of topology change. This is a temporary interface. It will change to a netlink interface before RSTP daemon is officially released. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
2007-04-10 03:57:54 +08:00
extern void br_fdb_flush(struct net_bridge *br);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
extern void br_fdb_changeaddr(struct net_bridge_port *p,
const unsigned char *newaddr);
bridge: add local MAC address to forwarding table (v2) If user has configured a MAC address that is not one of the existing ports of the bridge, then we need to add a special entry in the forwarding table. This forwarding table entry has no outgoing port so it has to be treated a little differently. The special entry is reported by the netlink interface with ifindex of bridge, but ignored by the old interface since there is no usable way to put it in the ABI. Reported-by: Koki Sanagi <sanagi.koki@jp.fujitsu.com> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-08 15:17:49 +08:00
extern void br_fdb_change_mac_address(struct net_bridge *br, const u8 *newaddr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
extern void br_fdb_cleanup(unsigned long arg);
extern void br_fdb_delete_by_port(struct net_bridge *br,
[BRIDGE]: flush forwarding table when device carrier off Flush the forwarding table when carrier is lost. This helps for availability because we don't want to forward to a downed device and new packets may come in on other links. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-13 05:45:38 +08:00
const struct net_bridge_port *p, int do_all);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
extern struct net_bridge_fdb_entry *__br_fdb_get(struct net_bridge *br,
bridge: Add vlan to unicast fdb entries This patch adds vlan to unicast fdb entries that are created for learned addresses (not the manually configured ones). It adds vlan id into the hash mix and uses vlan as an addditional parameter for an entry match. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:16 +08:00
const unsigned char *addr,
__u16 vid);
bridge: Simplify interface for ATM LANE This patch changes FDB entry check for ATM LANE bridge integration. There's no point in holding a FDB entry around SKB building. br_fdb_get()/br_fdb_put() pair are changed into single br_fdb_test_addr() hook that checks if the addr has FDB entry pointing to other port to the one the request arrived on. FDB entry refcounting is removed as it's not used anywhere else. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-05 13:35:28 +08:00
extern int br_fdb_test_addr(struct net_device *dev, unsigned char *addr);
[NET] BRIDGE: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 22:24:35 +08:00
extern int br_fdb_fillbuf(struct net_bridge *br, void *buf,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
unsigned long count, unsigned long off);
extern int br_fdb_insert(struct net_bridge *br,
struct net_bridge_port *source,
bridge: Add vlan support for local fdb entries When VLAN is added to the port, a local fdb entry for that port (the entry with the mac address of the port) is added for that VLAN. This way we can correctly determine if the traffic is for the bridge itself. If the address of the port changes, we try to change all the local fdb entries we have for that port. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:19 +08:00
const unsigned char *addr,
u16 vid);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
extern void br_fdb_update(struct net_bridge *br,
struct net_bridge_port *source,
bridge: Add vlan to unicast fdb entries This patch adds vlan to unicast fdb entries that are created for learned addresses (not the manually configured ones). It adds vlan id into the hash mix and uses vlan as an addditional parameter for an entry match. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:16 +08:00
const unsigned char *addr,
u16 vid);
bridge: Add vlan support for local fdb entries When VLAN is added to the port, a local fdb entry for that port (the entry with the mac address of the port) is added for that VLAN. This way we can correctly determine if the traffic is for the bridge itself. If the address of the port changes, we try to change all the local fdb entries we have for that port. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:19 +08:00
extern int fdb_delete_by_addr(struct net_bridge *br, const u8 *addr, u16 vid);
net: add generic PF_BRIDGE:RTM_ FDB hooks This adds two new flags NTF_MASTER and NTF_SELF that can now be used to specify where PF_BRIDGE netlink commands should be sent. NTF_MASTER sends the commands to the 'dev->master' device for parsing. Typically this will be the linux net/bridge, or open-vswitch devices. Also without any flags set the command will be handled by the master device as well so that current user space tools continue to work as expected. The NTF_SELF flag will push the PF_BRIDGE commands to the device. In the basic example below the commands are then parsed and programmed in the embedded bridge. Note if both NTF_SELF and NTF_MASTER bits are set then the command will be sent to both 'dev->master' and 'dev' this allows user space to easily keep the embedded bridge and software bridge in sync. There is a slight complication in the case with both flags set when an error occurs. To resolve this the rtnl handler clears the NTF_ flag in the netlink ack to indicate which sets completed successfully. The add/del handlers will abort as soon as any error occurs. To support this new net device ops were added to call into the device and the existing bridging code was refactored to use these. There should be no required changes in user space to support the current bridge behavior. A basic setup with a SR-IOV enabled NIC looks like this, veth0 veth2 | | ------------ | bridge0 | <---- software bridging ------------ / / ethx.y ethx VF PF \ \ <---- propagate FDB entries to HW \ \ -------------------- | Embedded Bridge | <---- hardware offloaded switching -------------------- In this case the embedded bridge must be managed to allow 'veth0' to communicate with 'ethx.y' correctly. At present drivers managing the embedded bridge either send frames onto the network which then get dropped by the switch OR the embedded bridge will flood these frames. With this patch we have a mechanism to manage the embedded bridge correctly from user space. This example is specific to SR-IOV but replacing the VF with another PF or dropping this into the DSA framework generates similar management issues. Examples session using the 'br'[1] tool to add, dump and then delete a mac address with a new "embedded" option and enabled ixgbe driver: # br fdb add 22:35:19:ac:60:59 dev eth3 # br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static #br fdb add 22:35:19:ac:60:59 embedded dev eth3 #br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static eth3 22:35:19:ac:60:59 local embedded #br fdb del 22:35:19:ac:60:59 embedded dev eth3 I added a couple lines to 'br' to set the flags correctly is all. It is my opinion that the merit of this patch is now embedded and SW bridges can both be modeled correctly in user space using very nearly the same message passing. [1] 'br' tool was published as an RFC here and will be renamed 'bridge' http://patchwork.ozlabs.org/patch/117664/ Thanks to Jamal Hadi Salim, Stephen Hemminger and Ben Hutchings for valuable feedback, suggestions, and review. v2: fixed api descriptions and error case with both NTF_SELF and NTF_MASTER set plus updated patch description. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 14:43:56 +08:00
bridge: Add vlan support to static neighbors When a user adds bridge neighbors, allow him to specify VLAN id. If the VLAN id is not specified, the neighbor will be added for VLANs currently in the ports filter list. If no VLANs are configured on the port, we use vlan 0 and only add 1 entry. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Acked-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:18 +08:00
extern int br_fdb_delete(struct ndmsg *ndm, struct nlattr *tb[],
net: add generic PF_BRIDGE:RTM_ FDB hooks This adds two new flags NTF_MASTER and NTF_SELF that can now be used to specify where PF_BRIDGE netlink commands should be sent. NTF_MASTER sends the commands to the 'dev->master' device for parsing. Typically this will be the linux net/bridge, or open-vswitch devices. Also without any flags set the command will be handled by the master device as well so that current user space tools continue to work as expected. The NTF_SELF flag will push the PF_BRIDGE commands to the device. In the basic example below the commands are then parsed and programmed in the embedded bridge. Note if both NTF_SELF and NTF_MASTER bits are set then the command will be sent to both 'dev->master' and 'dev' this allows user space to easily keep the embedded bridge and software bridge in sync. There is a slight complication in the case with both flags set when an error occurs. To resolve this the rtnl handler clears the NTF_ flag in the netlink ack to indicate which sets completed successfully. The add/del handlers will abort as soon as any error occurs. To support this new net device ops were added to call into the device and the existing bridging code was refactored to use these. There should be no required changes in user space to support the current bridge behavior. A basic setup with a SR-IOV enabled NIC looks like this, veth0 veth2 | | ------------ | bridge0 | <---- software bridging ------------ / / ethx.y ethx VF PF \ \ <---- propagate FDB entries to HW \ \ -------------------- | Embedded Bridge | <---- hardware offloaded switching -------------------- In this case the embedded bridge must be managed to allow 'veth0' to communicate with 'ethx.y' correctly. At present drivers managing the embedded bridge either send frames onto the network which then get dropped by the switch OR the embedded bridge will flood these frames. With this patch we have a mechanism to manage the embedded bridge correctly from user space. This example is specific to SR-IOV but replacing the VF with another PF or dropping this into the DSA framework generates similar management issues. Examples session using the 'br'[1] tool to add, dump and then delete a mac address with a new "embedded" option and enabled ixgbe driver: # br fdb add 22:35:19:ac:60:59 dev eth3 # br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static #br fdb add 22:35:19:ac:60:59 embedded dev eth3 #br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static eth3 22:35:19:ac:60:59 local embedded #br fdb del 22:35:19:ac:60:59 embedded dev eth3 I added a couple lines to 'br' to set the flags correctly is all. It is my opinion that the merit of this patch is now embedded and SW bridges can both be modeled correctly in user space using very nearly the same message passing. [1] 'br' tool was published as an RFC here and will be renamed 'bridge' http://patchwork.ozlabs.org/patch/117664/ Thanks to Jamal Hadi Salim, Stephen Hemminger and Ben Hutchings for valuable feedback, suggestions, and review. v2: fixed api descriptions and error case with both NTF_SELF and NTF_MASTER set plus updated patch description. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 14:43:56 +08:00
struct net_device *dev,
netdev: make address const in device address management The internal functions for add/deleting addresses don't change their argument. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-17 18:03:26 +08:00
const unsigned char *addr);
netlink: add attributes to fdb interface Later changes need to be able to refer to neighbour attributes when doing fdb_add. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-01 20:32:33 +08:00
extern int br_fdb_add(struct ndmsg *nlh, struct nlattr *tb[],
net: add generic PF_BRIDGE:RTM_ FDB hooks This adds two new flags NTF_MASTER and NTF_SELF that can now be used to specify where PF_BRIDGE netlink commands should be sent. NTF_MASTER sends the commands to the 'dev->master' device for parsing. Typically this will be the linux net/bridge, or open-vswitch devices. Also without any flags set the command will be handled by the master device as well so that current user space tools continue to work as expected. The NTF_SELF flag will push the PF_BRIDGE commands to the device. In the basic example below the commands are then parsed and programmed in the embedded bridge. Note if both NTF_SELF and NTF_MASTER bits are set then the command will be sent to both 'dev->master' and 'dev' this allows user space to easily keep the embedded bridge and software bridge in sync. There is a slight complication in the case with both flags set when an error occurs. To resolve this the rtnl handler clears the NTF_ flag in the netlink ack to indicate which sets completed successfully. The add/del handlers will abort as soon as any error occurs. To support this new net device ops were added to call into the device and the existing bridging code was refactored to use these. There should be no required changes in user space to support the current bridge behavior. A basic setup with a SR-IOV enabled NIC looks like this, veth0 veth2 | | ------------ | bridge0 | <---- software bridging ------------ / / ethx.y ethx VF PF \ \ <---- propagate FDB entries to HW \ \ -------------------- | Embedded Bridge | <---- hardware offloaded switching -------------------- In this case the embedded bridge must be managed to allow 'veth0' to communicate with 'ethx.y' correctly. At present drivers managing the embedded bridge either send frames onto the network which then get dropped by the switch OR the embedded bridge will flood these frames. With this patch we have a mechanism to manage the embedded bridge correctly from user space. This example is specific to SR-IOV but replacing the VF with another PF or dropping this into the DSA framework generates similar management issues. Examples session using the 'br'[1] tool to add, dump and then delete a mac address with a new "embedded" option and enabled ixgbe driver: # br fdb add 22:35:19:ac:60:59 dev eth3 # br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static #br fdb add 22:35:19:ac:60:59 embedded dev eth3 #br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static eth3 22:35:19:ac:60:59 local embedded #br fdb del 22:35:19:ac:60:59 embedded dev eth3 I added a couple lines to 'br' to set the flags correctly is all. It is my opinion that the merit of this patch is now embedded and SW bridges can both be modeled correctly in user space using very nearly the same message passing. [1] 'br' tool was published as an RFC here and will be renamed 'bridge' http://patchwork.ozlabs.org/patch/117664/ Thanks to Jamal Hadi Salim, Stephen Hemminger and Ben Hutchings for valuable feedback, suggestions, and review. v2: fixed api descriptions and error case with both NTF_SELF and NTF_MASTER set plus updated patch description. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 14:43:56 +08:00
struct net_device *dev,
netdev: make address const in device address management The internal functions for add/deleting addresses don't change their argument. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-17 18:03:26 +08:00
const unsigned char *addr,
net: add generic PF_BRIDGE:RTM_ FDB hooks This adds two new flags NTF_MASTER and NTF_SELF that can now be used to specify where PF_BRIDGE netlink commands should be sent. NTF_MASTER sends the commands to the 'dev->master' device for parsing. Typically this will be the linux net/bridge, or open-vswitch devices. Also without any flags set the command will be handled by the master device as well so that current user space tools continue to work as expected. The NTF_SELF flag will push the PF_BRIDGE commands to the device. In the basic example below the commands are then parsed and programmed in the embedded bridge. Note if both NTF_SELF and NTF_MASTER bits are set then the command will be sent to both 'dev->master' and 'dev' this allows user space to easily keep the embedded bridge and software bridge in sync. There is a slight complication in the case with both flags set when an error occurs. To resolve this the rtnl handler clears the NTF_ flag in the netlink ack to indicate which sets completed successfully. The add/del handlers will abort as soon as any error occurs. To support this new net device ops were added to call into the device and the existing bridging code was refactored to use these. There should be no required changes in user space to support the current bridge behavior. A basic setup with a SR-IOV enabled NIC looks like this, veth0 veth2 | | ------------ | bridge0 | <---- software bridging ------------ / / ethx.y ethx VF PF \ \ <---- propagate FDB entries to HW \ \ -------------------- | Embedded Bridge | <---- hardware offloaded switching -------------------- In this case the embedded bridge must be managed to allow 'veth0' to communicate with 'ethx.y' correctly. At present drivers managing the embedded bridge either send frames onto the network which then get dropped by the switch OR the embedded bridge will flood these frames. With this patch we have a mechanism to manage the embedded bridge correctly from user space. This example is specific to SR-IOV but replacing the VF with another PF or dropping this into the DSA framework generates similar management issues. Examples session using the 'br'[1] tool to add, dump and then delete a mac address with a new "embedded" option and enabled ixgbe driver: # br fdb add 22:35:19:ac:60:59 dev eth3 # br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static #br fdb add 22:35:19:ac:60:59 embedded dev eth3 #br fdb port mac addr flags veth0 22:35:19:ac:60:58 static veth0 9a:5f:81:f7:f6:ec local eth3 00:1b:21:55:23:59 local eth3 22:35:19:ac:60:59 static veth0 22:35:19:ac:60:57 static eth3 22:35:19:ac:60:59 local embedded #br fdb del 22:35:19:ac:60:59 embedded dev eth3 I added a couple lines to 'br' to set the flags correctly is all. It is my opinion that the merit of this patch is now embedded and SW bridges can both be modeled correctly in user space using very nearly the same message passing. [1] 'br' tool was published as an RFC here and will be renamed 'bridge' http://patchwork.ozlabs.org/patch/117664/ Thanks to Jamal Hadi Salim, Stephen Hemminger and Ben Hutchings for valuable feedback, suggestions, and review. v2: fixed api descriptions and error case with both NTF_SELF and NTF_MASTER set plus updated patch description. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-15 14:43:56 +08:00
u16 nlh_flags);
extern int br_fdb_dump(struct sk_buff *skb,
struct netlink_callback *cb,
struct net_device *dev,
int idx);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* br_forward.c */
extern void br_deliver(const struct net_bridge_port *to,
struct sk_buff *skb);
extern int br_dev_queue_push_xmit(struct sk_buff *skb);
extern void br_forward(const struct net_bridge_port *to,
bridge: Fix br_forward crash in promiscuous mode From: Michael Braun <michael-dev@fami-braun.de> bridge: Fix br_forward crash in promiscuous mode It's a linux-next kernel from 2010-03-12 on an x86 system and it OOPs in the bridge module in br_pass_frame_up (called by br_handle_frame_finish) because brdev cannot be dereferenced (its set to a non-null value). Adding some BUG_ON statements revealed that BR_INPUT_SKB_CB(skb)->brdev == br-dev (as set in br_handle_frame_finish first) only holds until br_forward is called. The next call to br_pass_frame_up then fails. Digging deeper it seems that br_forward either frees the skb or passes it to NF_HOOK which will in turn take care of freeing the skb. The same is holds for br_pass_frame_ip. So it seems as if two independent skb allocations are required. As far as I can see, commit b33084be192ee1e347d98bb5c9e38a53d98d35e2 ("bridge: Avoid unnecessary clone on forward path") removed skb duplication and so likely causes this crash. This crash does not happen on 2.6.33. I've therefore modified br_forward the same way br_flood has been modified so that the skb is not freed if skb0 is going to be used and I can confirm that the attached patch resolves the issue for me. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-16 15:26:22 +08:00
struct sk_buff *skb, struct sk_buff *skb0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
extern int br_forward_finish(struct sk_buff *skb);
[BRIDGE]: Kill clone argument to br_flood_* The clone argument is only used by one caller and that caller can clone the packet itself. This patch moves the clone call into the caller and kills the clone argument. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 07:20:48 +08:00
extern void br_flood_deliver(struct net_bridge *br, struct sk_buff *skb);
bridge: Avoid unnecessary clone on forward path When the packet is delivered to the local bridge device we may end up cloning it unnecessarily if no bridge port can receive the packet in br_flood. This patch avoids this by moving the skb_clone into br_flood. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28 03:41:41 +08:00
extern void br_flood_forward(struct net_bridge *br, struct sk_buff *skb,
struct sk_buff *skb2);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* br_if.c */
[BRIDGE]: eliminate workqueue for carrier check Having a work queue for checking carrier leads to lots of race issues. Simpler to just get the cost when data structure is created and update on change. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-22 17:10:18 +08:00
extern void br_port_carrier_check(struct net_bridge_port *p);
netns bridge: allow bridges in netns! Bridge as netdevice doesn't cross netns boundaries. Bridge ports and bridge itself live in same netns. Notifiers are fixed. netns propagated from userspace socket for setup and teardown. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Stephen Hemminger <shemming@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-09 07:19:58 +08:00
extern int br_add_bridge(struct net *net, const char *name);
extern int br_del_bridge(struct net *net, const char *name);
netns bridge: cleanup bridges during netns stop Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Stephen Hemminger <shemming@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-09 07:20:18 +08:00
extern void br_net_exit(struct net *net);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
extern int br_add_if(struct net_bridge *br,
struct net_device *dev);
extern int br_del_if(struct net_bridge *br,
struct net_device *dev);
extern int br_min_mtu(const struct net_bridge *br);
net: introduce and use netdev_features_t for device features sets v2: add couple missing conversions in drivers split unexporting netdev_fix_features() implemented %pNF convert sock::sk_route_(no?)caps Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-15 23:29:55 +08:00
extern netdev_features_t br_features_recompute(struct net_bridge *br,
netdev_features_t features);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* br_input.c */
extern int br_handle_frame_finish(struct sk_buff *skb);
net: introduce rx_handler results and logic around that This patch allows rx_handlers to better signalize what to do next to it's caller. That makes skb->deliver_no_wcard no longer needed. kernel-doc for rx_handler_result is taken from Nicolas' patch. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 11:14:39 +08:00
extern rx_handler_result_t br_handle_frame(struct sk_buff **pskb);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* br_ioctl.c */
extern int br_dev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-18 02:56:21 +08:00
extern int br_ioctl_deviceless_stub(struct net *net, unsigned int cmd, void __user *arg);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bridge: Add core IGMP snooping support This patch adds the core functionality of IGMP snooping support without actually hooking it up. So this patch should be a no-op as far as the bridge's external behaviour is concerned. All the new code and data is controlled by the Kconfig option BRIDGE_IGMP_SNOOPING. A run-time toggle is also available. The multicast switching is done using an hash table that is lockless on the read-side through RCU. On the write-side the new multicast_lock is used for all operations. The hash table supports dynamic growth/rehashing. The hash table will be rehashed if any chain length exceeds a preset limit. If rehashing does not reduce the maximum chain length then snooping will be disabled. These features may be added in future (in no particular order): * IGMPv3 source support * Non-querier router detection * IPv6 Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28 03:41:45 +08:00
/* br_multicast.c */
#ifdef CONFIG_BRIDGE_IGMP_SNOOPING
bridge: fix seq check in br_mdb_dump() In case of rehashing, introduce a global variable 'br_mdb_rehash_seq' which gets increased every time when rehashing, and assign net->dev_base_seq + br_mdb_rehash_seq to cb->seq. In theory cb->seq could be wrapped to zero, but this is not easy to fix, as net->dev_base_seq is not visible inside br_mdb_rehash(). In practice, this is rare. Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Graf <tgraf@suug.ch> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-10 10:15:35 +08:00
extern unsigned int br_mdb_rehash_seq;
bridge: Add core IGMP snooping support This patch adds the core functionality of IGMP snooping support without actually hooking it up. So this patch should be a no-op as far as the bridge's external behaviour is concerned. All the new code and data is controlled by the Kconfig option BRIDGE_IGMP_SNOOPING. A run-time toggle is also available. The multicast switching is done using an hash table that is lockless on the read-side through RCU. On the write-side the new multicast_lock is used for all operations. The hash table supports dynamic growth/rehashing. The hash table will be rehashed if any chain length exceeds a preset limit. If rehashing does not reduce the maximum chain length then snooping will be disabled. These features may be added in future (in no particular order): * IGMPv3 source support * Non-querier router detection * IPv6 Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28 03:41:45 +08:00
extern int br_multicast_rcv(struct net_bridge *br,
struct net_bridge_port *port,
struct sk_buff *skb);
extern struct net_bridge_mdb_entry *br_mdb_get(struct net_bridge *br,
bridge: add missing vid to br_mdb_get() Obviously, vid should be considered when searching for multicast group. Cc: Vlad Yasevich <vyasevic@redhat.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Acked-by: Vlad Yasevich <vyasevich@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-07 11:05:33 +08:00
struct sk_buff *skb, u16 vid);
bridge: Add core IGMP snooping support This patch adds the core functionality of IGMP snooping support without actually hooking it up. So this patch should be a no-op as far as the bridge's external behaviour is concerned. All the new code and data is controlled by the Kconfig option BRIDGE_IGMP_SNOOPING. A run-time toggle is also available. The multicast switching is done using an hash table that is lockless on the read-side through RCU. On the write-side the new multicast_lock is used for all operations. The hash table supports dynamic growth/rehashing. The hash table will be rehashed if any chain length exceeds a preset limit. If rehashing does not reduce the maximum chain length then snooping will be disabled. These features may be added in future (in no particular order): * IGMPv3 source support * Non-querier router detection * IPv6 Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28 03:41:45 +08:00
extern void br_multicast_add_port(struct net_bridge_port *port);
extern void br_multicast_del_port(struct net_bridge_port *port);
extern void br_multicast_enable_port(struct net_bridge_port *port);
extern void br_multicast_disable_port(struct net_bridge_port *port);
extern void br_multicast_init(struct net_bridge *br);
extern void br_multicast_open(struct net_bridge *br);
extern void br_multicast_stop(struct net_bridge *br);
bridge: Add multicast forwarding functions This patch adds code to perform selective multicast forwarding. We forward multicast traffic to a set of ports plus all multicast router ports. In order to avoid duplications among these two sets of ports, we order all ports by the numeric value of their pointers. The two lists are then walked in lock-step to eliminate duplicates. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28 03:41:46 +08:00
extern void br_multicast_deliver(struct net_bridge_mdb_entry *mdst,
struct sk_buff *skb);
extern void br_multicast_forward(struct net_bridge_mdb_entry *mdst,
struct sk_buff *skb, struct sk_buff *skb2);
bridge: Add multicast_router sysfs entries This patch allows the user to forcibly enable/disable ports as having multicast routers attached. A port with a multicast router will receive all multicast traffic. The value 0 disables it completely. The default is 1 which lets the system automatically detect the presence of routers (currently this is limited to picking up queries), and 2 means that the port will always receive all multicast traffic. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28 03:41:49 +08:00
extern int br_multicast_set_router(struct net_bridge *br, unsigned long val);
extern int br_multicast_set_port_router(struct net_bridge_port *p,
unsigned long val);
bridge: Add multicast_snooping sysfs toggle This patch allows the user to disable IGMP snooping completely through a sysfs toggle. It also allows the user to reenable snooping when it has been automatically disabled due to hash collisions. If the collisions have not been resolved however the system will refuse to reenable snooping. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28 03:41:50 +08:00
extern int br_multicast_toggle(struct net_bridge *br, unsigned long val);
bridge: Add multicast_querier toggle and disable queries by default Sending general queries was implemented as an optimisation to speed up convergence on start-up. In order to prevent interference with multicast routers a zero source address has to be used. Unfortunately these packets appear to cause some multicast-aware switches to misbehave, e.g., by disrupting multicast packets to us. Since the multicast snooping feature still functions without sending our own queries, this patch will change the default to not send queries. For those that need queries in order to speed up convergence on start-up, a toggle is provided to restore the previous behaviour. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-13 10:37:42 +08:00
extern int br_multicast_set_querier(struct net_bridge *br, unsigned long val);
bridge: Add hash elasticity/max sysfs entries This patch allows the user to control the hash elasticity/max parameters. The elasticity setting does not take effect until the next new multicast group is added. At which point it is checked and if after rehashing it still can't be satisfied then snooping will be disabled. The max setting on the other hand takes effect immediately. It must be a power of two and cannot be set to a value less than the current number of multicast group entries. This is the only way to shrink the multicast hash. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28 03:41:51 +08:00
extern int br_multicast_set_hash_max(struct net_bridge *br, unsigned long val);
bridge: add support of adding and deleting mdb entries This patch implents adding/deleting mdb entries via netlink. Currently all entries are temp, we probably need a flag to distinguish permanent entries too. Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-12 06:23:08 +08:00
extern struct net_bridge_mdb_entry *br_mdb_ip_get(
struct net_bridge_mdb_htable *mdb,
struct br_ip *dst);
extern struct net_bridge_mdb_entry *br_multicast_new_group(struct net_bridge *br,
struct net_bridge_port *port, struct br_ip *group);
extern void br_multicast_free_pg(struct rcu_head *head);
extern struct net_bridge_port_group *br_multicast_new_port_group(
struct net_bridge_port *port,
struct br_ip *group,
bridge: add flags to distinguish permanent mdb entires This patch adds a flag to each mdb entry, so that we can distinguish permanent entries with temporary entries. Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-15 06:09:51 +08:00
struct net_bridge_port_group *next,
unsigned char state);
bridge: export multicast database via netlink V5: fix two bugs pointed out by Thomas remove seq check for now, mark it as TODO V4: remove some useless #include some coding style fix V3: drop debugging printk's update selinux perm table as well V2: drop patch 1/2, export ifindex directly Redesign netlink attributes Improve netlink seq check Handle IPv6 addr as well This patch exports bridge multicast database via netlink message type RTM_GETMDB. Similar to fdb, but currently bridge-specific. We may need to support modify multicast database too (RTM_{ADD,DEL}MDB). (Thanks to Thomas for patient reviews) Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Graf <tgraf@suug.ch> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Cong Wang <amwang@redhat.com> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-07 08:04:48 +08:00
extern void br_mdb_init(void);
bridge: Do not unregister all PF_BRIDGE rtnl operations Bridge fdb and link rtnl operations are registered in core/rtnetlink. Bridge mdb operations are registred in bridge/mdb. When removing bridge module, do not unregister ALL PF_BRIDGE ops since that would remove the ops from rtnetlink as well. Do remove mdb ops when bridge is destroyed. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-19 17:13:48 +08:00
extern void br_mdb_uninit(void);
bridge: notify mdb changes via netlink As Stephen mentioned, we need to monitor the mdb changes in user-space, so add notifications via netlink too. Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-12 06:23:07 +08:00
extern void br_mdb_notify(struct net_device *dev, struct net_bridge_port *port,
struct br_ip *group, int type);
bridge: Fix build error when IGMP_SNOOPING is not enabled Fix the following build error when IGMP_SNOOPING is not enabled. In file included from net/bridge/br.c:24: net/bridge/br_private.h: In function 'br_multicast_is_router': net/bridge/br_private.h:361: error: 'struct net_bridge' has no member named 'multicast_router' net/bridge/br_private.h:362: error: 'struct net_bridge' has no member named 'multicast_router' net/bridge/br_private.h:363: error: 'struct net_bridge' has no member named 'multicast_router_timer' Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-01 17:53:04 +08:00
bridge: add support of adding and deleting mdb entries This patch implents adding/deleting mdb entries via netlink. Currently all entries are temp, we probably need a flag to distinguish permanent entries too. Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-12 06:23:08 +08:00
#define mlock_dereference(X, br) \
rcu_dereference_protected(X, lockdep_is_held(&br->multicast_lock))
#if IS_ENABLED(CONFIG_IPV6)
#include <net/addrconf.h>
static inline int ipv6_is_transient_multicast(const struct in6_addr *addr)
{
if (ipv6_addr_is_multicast(addr) && IPV6_ADDR_MC_FLAG_TRANSIENT(addr))
return 1;
return 0;
}
#endif
bridge: Fix build error when IGMP_SNOOPING is not enabled Fix the following build error when IGMP_SNOOPING is not enabled. In file included from net/bridge/br.c:24: net/bridge/br_private.h: In function 'br_multicast_is_router': net/bridge/br_private.h:361: error: 'struct net_bridge' has no member named 'multicast_router' net/bridge/br_private.h:362: error: 'struct net_bridge' has no member named 'multicast_router' net/bridge/br_private.h:363: error: 'struct net_bridge' has no member named 'multicast_router_timer' Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-01 17:53:04 +08:00
static inline bool br_multicast_is_router(struct net_bridge *br)
{
return br->multicast_router == 2 ||
(br->multicast_router == 1 &&
timer_pending(&br->multicast_router_timer));
}
bridge: Add core IGMP snooping support This patch adds the core functionality of IGMP snooping support without actually hooking it up. So this patch should be a no-op as far as the bridge's external behaviour is concerned. All the new code and data is controlled by the Kconfig option BRIDGE_IGMP_SNOOPING. A run-time toggle is also available. The multicast switching is done using an hash table that is lockless on the read-side through RCU. On the write-side the new multicast_lock is used for all operations. The hash table supports dynamic growth/rehashing. The hash table will be rehashed if any chain length exceeds a preset limit. If rehashing does not reduce the maximum chain length then snooping will be disabled. These features may be added in future (in no particular order): * IGMPv3 source support * Non-querier router detection * IPv6 Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28 03:41:45 +08:00
#else
static inline int br_multicast_rcv(struct net_bridge *br,
struct net_bridge_port *port,
struct sk_buff *skb)
{
return 0;
}
static inline struct net_bridge_mdb_entry *br_mdb_get(struct net_bridge *br,
bridge: add missing vid to br_mdb_get() Obviously, vid should be considered when searching for multicast group. Cc: Vlad Yasevich <vyasevic@redhat.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Acked-by: Vlad Yasevich <vyasevich@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-07 11:05:33 +08:00
struct sk_buff *skb, u16 vid)
bridge: Add core IGMP snooping support This patch adds the core functionality of IGMP snooping support without actually hooking it up. So this patch should be a no-op as far as the bridge's external behaviour is concerned. All the new code and data is controlled by the Kconfig option BRIDGE_IGMP_SNOOPING. A run-time toggle is also available. The multicast switching is done using an hash table that is lockless on the read-side through RCU. On the write-side the new multicast_lock is used for all operations. The hash table supports dynamic growth/rehashing. The hash table will be rehashed if any chain length exceeds a preset limit. If rehashing does not reduce the maximum chain length then snooping will be disabled. These features may be added in future (in no particular order): * IGMPv3 source support * Non-querier router detection * IPv6 Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28 03:41:45 +08:00
{
return NULL;
}
static inline void br_multicast_add_port(struct net_bridge_port *port)
{
}
static inline void br_multicast_del_port(struct net_bridge_port *port)
{
}
static inline void br_multicast_enable_port(struct net_bridge_port *port)
{
}
static inline void br_multicast_disable_port(struct net_bridge_port *port)
{
}
static inline void br_multicast_init(struct net_bridge *br)
{
}
static inline void br_multicast_open(struct net_bridge *br)
{
}
static inline void br_multicast_stop(struct net_bridge *br)
{
}
bridge: Add multicast forwarding functions This patch adds code to perform selective multicast forwarding. We forward multicast traffic to a set of ports plus all multicast router ports. In order to avoid duplications among these two sets of ports, we order all ports by the numeric value of their pointers. The two lists are then walked in lock-step to eliminate duplicates. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28 03:41:46 +08:00
static inline void br_multicast_deliver(struct net_bridge_mdb_entry *mdst,
struct sk_buff *skb)
{
}
static inline void br_multicast_forward(struct net_bridge_mdb_entry *mdst,
struct sk_buff *skb,
struct sk_buff *skb2)
{
}
bridge: Add core IGMP snooping support This patch adds the core functionality of IGMP snooping support without actually hooking it up. So this patch should be a no-op as far as the bridge's external behaviour is concerned. All the new code and data is controlled by the Kconfig option BRIDGE_IGMP_SNOOPING. A run-time toggle is also available. The multicast switching is done using an hash table that is lockless on the read-side through RCU. On the write-side the new multicast_lock is used for all operations. The hash table supports dynamic growth/rehashing. The hash table will be rehashed if any chain length exceeds a preset limit. If rehashing does not reduce the maximum chain length then snooping will be disabled. These features may be added in future (in no particular order): * IGMPv3 source support * Non-querier router detection * IPv6 Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28 03:41:45 +08:00
static inline bool br_multicast_is_router(struct net_bridge *br)
{
bridge: Fix build error when IGMP_SNOOPING is not enabled Fix the following build error when IGMP_SNOOPING is not enabled. In file included from net/bridge/br.c:24: net/bridge/br_private.h: In function 'br_multicast_is_router': net/bridge/br_private.h:361: error: 'struct net_bridge' has no member named 'multicast_router' net/bridge/br_private.h:362: error: 'struct net_bridge' has no member named 'multicast_router' net/bridge/br_private.h:363: error: 'struct net_bridge' has no member named 'multicast_router_timer' Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-01 17:53:04 +08:00
return 0;
bridge: Add core IGMP snooping support This patch adds the core functionality of IGMP snooping support without actually hooking it up. So this patch should be a no-op as far as the bridge's external behaviour is concerned. All the new code and data is controlled by the Kconfig option BRIDGE_IGMP_SNOOPING. A run-time toggle is also available. The multicast switching is done using an hash table that is lockless on the read-side through RCU. On the write-side the new multicast_lock is used for all operations. The hash table supports dynamic growth/rehashing. The hash table will be rehashed if any chain length exceeds a preset limit. If rehashing does not reduce the maximum chain length then snooping will be disabled. These features may be added in future (in no particular order): * IGMPv3 source support * Non-querier router detection * IPv6 Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28 03:41:45 +08:00
}
bridge: add empty br_mdb_init() and br_mdb_uninit() definitions. This patch adds empty br_mdb_init() and br_mdb_uninit() definitions in br_private.h to avoid build failure when CONFIG_BRIDGE_IGMP_SNOOPING is not set. These methods were moved from br_multicast.c to br_netlink.c by commit 3ec8e9f085bcaef0de1077f555c2c5102c223390 Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-03 19:30:43 +08:00
static inline void br_mdb_init(void)
{
}
static inline void br_mdb_uninit(void)
{
}
bridge: Fix build error when IGMP_SNOOPING is not enabled Fix the following build error when IGMP_SNOOPING is not enabled. In file included from net/bridge/br.c:24: net/bridge/br_private.h: In function 'br_multicast_is_router': net/bridge/br_private.h:361: error: 'struct net_bridge' has no member named 'multicast_router' net/bridge/br_private.h:362: error: 'struct net_bridge' has no member named 'multicast_router' net/bridge/br_private.h:363: error: 'struct net_bridge' has no member named 'multicast_router_timer' Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-01 17:53:04 +08:00
#endif
bridge: Add core IGMP snooping support This patch adds the core functionality of IGMP snooping support without actually hooking it up. So this patch should be a no-op as far as the bridge's external behaviour is concerned. All the new code and data is controlled by the Kconfig option BRIDGE_IGMP_SNOOPING. A run-time toggle is also available. The multicast switching is done using an hash table that is lockless on the read-side through RCU. On the write-side the new multicast_lock is used for all operations. The hash table supports dynamic growth/rehashing. The hash table will be rehashed if any chain length exceeds a preset limit. If rehashing does not reduce the maximum chain length then snooping will be disabled. These features may be added in future (in no particular order): * IGMPv3 source support * Non-querier router detection * IPv6 Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-28 03:41:45 +08:00
bridge: Add vlan filtering infrastructure Adds an optional infrustructure component to bridge that would allow native vlan filtering in the bridge. Each bridge port (as well as the bridge device) now get a VLAN bitmap. Each bit in the bitmap is associated with a vlan id. This way if the bit corresponding to the vid is set in the bitmap that the packet with vid is allowed to enter and exit the port. Write access the bitmap is protected by RTNL and read access protected by RCU. Vlan functionality is disabled by default. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:09 +08:00
/* br_vlan.c */
#ifdef CONFIG_BRIDGE_VLAN_FILTERING
bridge: Validate that vlan is permitted on ingress When a frame arrives on a port or transmitted by the bridge, if we have VLANs configured, validate that a given VLAN is allowed to enter the bridge. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:10 +08:00
extern bool br_allowed_ingress(struct net_bridge *br, struct net_port_vlans *v,
bridge: Implement vlan ingress/egress policy with PVID. At ingress, any untagged traffic is assigned to the PVID. Any tagged traffic is filtered according to membership bitmap. At egress, if the vlan matches the PVID, the frame is sent untagged. Otherwise the frame is sent tagged. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:14 +08:00
struct sk_buff *skb, u16 *vid);
bridge: Verify that a vlan is allowed to egress on given port When bridge forwards a frame, make sure that a frame is allowed to egress on that port. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:11 +08:00
extern bool br_allowed_egress(struct net_bridge *br,
const struct net_port_vlans *v,
const struct sk_buff *skb);
bridge: Implement vlan ingress/egress policy with PVID. At ingress, any untagged traffic is assigned to the PVID. Any tagged traffic is filtered according to membership bitmap. At egress, if the vlan matches the PVID, the frame is sent untagged. Otherwise the frame is sent tagged. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:14 +08:00
extern struct sk_buff *br_handle_vlan(struct net_bridge *br,
const struct net_port_vlans *v,
struct sk_buff *skb);
bridge: Add the ability to configure pvid A user may designate a certain vlan as PVID. This means that any ingress frame that does not contain a vlan tag is assigned to this vlan and any forwarding decisions are made with this vlan in mind. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:15 +08:00
extern int br_vlan_add(struct net_bridge *br, u16 vid, u16 flags);
bridge: Add vlan filtering infrastructure Adds an optional infrustructure component to bridge that would allow native vlan filtering in the bridge. Each bridge port (as well as the bridge device) now get a VLAN bitmap. Each bit in the bitmap is associated with a vlan id. This way if the bit corresponding to the vid is set in the bitmap that the packet with vid is allowed to enter and exit the port. Write access the bitmap is protected by RTNL and read access protected by RCU. Vlan functionality is disabled by default. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:09 +08:00
extern int br_vlan_delete(struct net_bridge *br, u16 vid);
extern void br_vlan_flush(struct net_bridge *br);
extern int br_vlan_filter_toggle(struct net_bridge *br, unsigned long val);
bridge: Add the ability to configure pvid A user may designate a certain vlan as PVID. This means that any ingress frame that does not contain a vlan tag is assigned to this vlan and any forwarding decisions are made with this vlan in mind. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:15 +08:00
extern int nbp_vlan_add(struct net_bridge_port *port, u16 vid, u16 flags);
bridge: Add vlan filtering infrastructure Adds an optional infrustructure component to bridge that would allow native vlan filtering in the bridge. Each bridge port (as well as the bridge device) now get a VLAN bitmap. Each bit in the bitmap is associated with a vlan id. This way if the bit corresponding to the vid is set in the bitmap that the packet with vid is allowed to enter and exit the port. Write access the bitmap is protected by RTNL and read access protected by RCU. Vlan functionality is disabled by default. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:09 +08:00
extern int nbp_vlan_delete(struct net_bridge_port *port, u16 vid);
extern void nbp_vlan_flush(struct net_bridge_port *port);
bridge: Add vlan support for local fdb entries When VLAN is added to the port, a local fdb entry for that port (the entry with the mac address of the port) is added for that VLAN. This way we can correctly determine if the traffic is for the bridge itself. If the address of the port changes, we try to change all the local fdb entries we have for that port. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:19 +08:00
extern bool nbp_vlan_find(struct net_bridge_port *port, u16 vid);
bridge: Validate that vlan is permitted on ingress When a frame arrives on a port or transmitted by the bridge, if we have VLANs configured, validate that a given VLAN is allowed to enter the bridge. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:10 +08:00
static inline struct net_port_vlans *br_get_vlan_info(
const struct net_bridge *br)
{
bridge: Add vlan support to static neighbors When a user adds bridge neighbors, allow him to specify VLAN id. If the VLAN id is not specified, the neighbor will be added for VLANs currently in the ports filter list. If no VLANs are configured on the port, we use vlan 0 and only add 1 entry. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Acked-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:18 +08:00
return rcu_dereference_rtnl(br->vlan_info);
bridge: Validate that vlan is permitted on ingress When a frame arrives on a port or transmitted by the bridge, if we have VLANs configured, validate that a given VLAN is allowed to enter the bridge. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:10 +08:00
}
static inline struct net_port_vlans *nbp_get_vlan_info(
const struct net_bridge_port *p)
{
bridge: Add vlan support to static neighbors When a user adds bridge neighbors, allow him to specify VLAN id. If the VLAN id is not specified, the neighbor will be added for VLANs currently in the ports filter list. If no VLANs are configured on the port, we use vlan 0 and only add 1 entry. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Acked-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:18 +08:00
return rcu_dereference_rtnl(p->vlan_info);
bridge: Validate that vlan is permitted on ingress When a frame arrives on a port or transmitted by the bridge, if we have VLANs configured, validate that a given VLAN is allowed to enter the bridge. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:10 +08:00
}
/* Since bridge now depends on 8021Q module, but the time bridge sees the
* skb, the vlan tag will always be present if the frame was tagged.
*/
static inline int br_vlan_get_tag(const struct sk_buff *skb, u16 *vid)
{
int err = 0;
if (vlan_tx_tag_present(skb))
*vid = vlan_tx_tag_get(skb) & VLAN_VID_MASK;
else {
*vid = 0;
err = -EINVAL;
}
return err;
}
bridge: Implement vlan ingress/egress policy with PVID. At ingress, any untagged traffic is assigned to the PVID. Any tagged traffic is filtered according to membership bitmap. At egress, if the vlan matches the PVID, the frame is sent untagged. Otherwise the frame is sent tagged. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:14 +08:00
static inline u16 br_get_pvid(const struct net_port_vlans *v)
{
/* Return just the VID if it is set, or VLAN_N_VID (invalid vid) if
* vid wasn't set
*/
smp_rmb();
return (v->pvid & VLAN_TAG_PRESENT) ?
(v->pvid & ~VLAN_TAG_PRESENT) :
VLAN_N_VID;
}
bridge: Add vlan filtering infrastructure Adds an optional infrustructure component to bridge that would allow native vlan filtering in the bridge. Each bridge port (as well as the bridge device) now get a VLAN bitmap. Each bit in the bitmap is associated with a vlan id. This way if the bit corresponding to the vid is set in the bitmap that the packet with vid is allowed to enter and exit the port. Write access the bitmap is protected by RTNL and read access protected by RCU. Vlan functionality is disabled by default. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:09 +08:00
#else
bridge: Validate that vlan is permitted on ingress When a frame arrives on a port or transmitted by the bridge, if we have VLANs configured, validate that a given VLAN is allowed to enter the bridge. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:10 +08:00
static inline bool br_allowed_ingress(struct net_bridge *br,
struct net_port_vlans *v,
bridge: Implement vlan ingress/egress policy with PVID. At ingress, any untagged traffic is assigned to the PVID. Any tagged traffic is filtered according to membership bitmap. At egress, if the vlan matches the PVID, the frame is sent untagged. Otherwise the frame is sent tagged. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:14 +08:00
struct sk_buff *skb,
u16 *vid)
bridge: Validate that vlan is permitted on ingress When a frame arrives on a port or transmitted by the bridge, if we have VLANs configured, validate that a given VLAN is allowed to enter the bridge. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:10 +08:00
{
return true;
}
bridge: Verify that a vlan is allowed to egress on given port When bridge forwards a frame, make sure that a frame is allowed to egress on that port. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:11 +08:00
static inline bool br_allowed_egress(struct net_bridge *br,
const struct net_port_vlans *v,
const struct sk_buff *skb)
{
return true;
}
bridge: Implement vlan ingress/egress policy with PVID. At ingress, any untagged traffic is assigned to the PVID. Any tagged traffic is filtered according to membership bitmap. At egress, if the vlan matches the PVID, the frame is sent untagged. Otherwise the frame is sent tagged. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:14 +08:00
static inline struct sk_buff *br_handle_vlan(struct net_bridge *br,
const struct net_port_vlans *v,
struct sk_buff *skb)
{
return skb;
}
bridge: Add the ability to configure pvid A user may designate a certain vlan as PVID. This means that any ingress frame that does not contain a vlan tag is assigned to this vlan and any forwarding decisions are made with this vlan in mind. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:15 +08:00
static inline int br_vlan_add(struct net_bridge *br, u16 vid, u16 flags)
bridge: Add vlan filtering infrastructure Adds an optional infrustructure component to bridge that would allow native vlan filtering in the bridge. Each bridge port (as well as the bridge device) now get a VLAN bitmap. Each bit in the bitmap is associated with a vlan id. This way if the bit corresponding to the vid is set in the bitmap that the packet with vid is allowed to enter and exit the port. Write access the bitmap is protected by RTNL and read access protected by RCU. Vlan functionality is disabled by default. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:09 +08:00
{
return -EOPNOTSUPP;
}
static inline int br_vlan_delete(struct net_bridge *br, u16 vid)
{
return -EOPNOTSUPP;
}
static inline void br_vlan_flush(struct net_bridge *br)
{
}
bridge: Add the ability to configure pvid A user may designate a certain vlan as PVID. This means that any ingress frame that does not contain a vlan tag is assigned to this vlan and any forwarding decisions are made with this vlan in mind. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:15 +08:00
static inline int nbp_vlan_add(struct net_bridge_port *port, u16 vid, u16 flags)
bridge: Add vlan filtering infrastructure Adds an optional infrustructure component to bridge that would allow native vlan filtering in the bridge. Each bridge port (as well as the bridge device) now get a VLAN bitmap. Each bit in the bitmap is associated with a vlan id. This way if the bit corresponding to the vid is set in the bitmap that the packet with vid is allowed to enter and exit the port. Write access the bitmap is protected by RTNL and read access protected by RCU. Vlan functionality is disabled by default. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:09 +08:00
{
return -EOPNOTSUPP;
}
static inline int nbp_vlan_delete(struct net_bridge_port *port, u16 vid)
{
return -EOPNOTSUPP;
}
static inline void nbp_vlan_flush(struct net_bridge_port *port)
{
}
bridge: Validate that vlan is permitted on ingress When a frame arrives on a port or transmitted by the bridge, if we have VLANs configured, validate that a given VLAN is allowed to enter the bridge. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:10 +08:00
static inline struct net_port_vlans *br_get_vlan_info(
const struct net_bridge *br)
{
return NULL;
}
static inline struct net_port_vlans *nbp_get_vlan_info(
const struct net_bridge_port *p)
{
return NULL;
}
bridge: Add vlan support for local fdb entries When VLAN is added to the port, a local fdb entry for that port (the entry with the mac address of the port) is added for that VLAN. This way we can correctly determine if the traffic is for the bridge itself. If the address of the port changes, we try to change all the local fdb entries we have for that port. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:19 +08:00
static inline bool nbp_vlan_find(struct net_bridge_port *port, u16 vid)
{
return false;
}
bridge: Implement vlan ingress/egress policy with PVID. At ingress, any untagged traffic is assigned to the PVID. Any tagged traffic is filtered according to membership bitmap. At egress, if the vlan matches the PVID, the frame is sent untagged. Otherwise the frame is sent tagged. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:14 +08:00
static inline u16 br_vlan_get_tag(const struct sk_buff *skb, u16 *tag)
bridge: Validate that vlan is permitted on ingress When a frame arrives on a port or transmitted by the bridge, if we have VLANs configured, validate that a given VLAN is allowed to enter the bridge. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:10 +08:00
{
return 0;
}
bridge: Implement vlan ingress/egress policy with PVID. At ingress, any untagged traffic is assigned to the PVID. Any tagged traffic is filtered according to membership bitmap. At egress, if the vlan matches the PVID, the frame is sent untagged. Otherwise the frame is sent tagged. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:14 +08:00
static inline u16 br_get_pvid(const struct net_port_vlans *v)
{
return VLAN_N_VID; /* Returns invalid vid */
}
bridge: Add vlan filtering infrastructure Adds an optional infrustructure component to bridge that would allow native vlan filtering in the bridge. Each bridge port (as well as the bridge device) now get a VLAN bitmap. Each bit in the bitmap is associated with a vlan id. This way if the bit corresponding to the vid is set in the bitmap that the packet with vid is allowed to enter and exit the port. Write access the bitmap is protected by RTNL and read access protected by RCU. Vlan functionality is disabled by default. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:09 +08:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* br_netfilter.c */
[BRIDGE]: fix module startup error handling Return address in use, if some other kernel code has the SAP. Propogate out error codes from netfilter registration and unwind. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-26 06:59:33 +08:00
#ifdef CONFIG_BRIDGE_NETFILTER
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
extern int br_netfilter_init(void);
extern void br_netfilter_fini(void);
bridge: send correct MTU value in PMTU (revised) When bridging interfaces with different MTUs, the bridge correctly chooses the minimum of the MTUs of the physical devices as the bridges MTU. But when a frame is passed which fits through the incoming, but not through the outgoing interface, a "Fragmentation Needed" packet is generated. However, the propagated MTU is hardcoded to 1500, which is wrong in this situation. The sender will repeat the packet again with the same frame size, and the same problem will occur again. Instead of sending 1500, the (correct) MTU value of the bridge is now sent via PMTU. To achieve this, the corresponding rtable structure is stored in its net_bridge structure. Modified to get rid of fake_net_device as well. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-31 07:27:55 +08:00
extern void br_netfilter_rtable_init(struct net_bridge *);
[BRIDGE]: fix module startup error handling Return address in use, if some other kernel code has the SAP. Propogate out error codes from netfilter registration and unwind. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-26 06:59:33 +08:00
#else
#define br_netfilter_init() (0)
#define br_netfilter_fini() do { } while(0)
bridge: send correct MTU value in PMTU (revised) When bridging interfaces with different MTUs, the bridge correctly chooses the minimum of the MTUs of the physical devices as the bridges MTU. But when a frame is passed which fits through the incoming, but not through the outgoing interface, a "Fragmentation Needed" packet is generated. However, the propagated MTU is hardcoded to 1500, which is wrong in this situation. The sender will repeat the packet again with the same frame size, and the same problem will occur again. Instead of sending 1500, the (correct) MTU value of the bridge is now sent via PMTU. To achieve this, the corresponding rtable structure is stored in its net_bridge structure. Modified to get rid of fake_net_device as well. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-31 07:27:55 +08:00
#define br_netfilter_rtable_init(x)
[BRIDGE]: fix module startup error handling Return address in use, if some other kernel code has the SAP. Propogate out error codes from netfilter registration and unwind. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-26 06:59:33 +08:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* br_stp.c */
extern void br_log_state(const struct net_bridge_port *p);
extern struct net_bridge_port *br_get_port(struct net_bridge *br,
[NET] BRIDGE: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 22:24:35 +08:00
u16 port_no);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
extern void br_init_port(struct net_bridge_port *p);
extern void br_become_designated_port(struct net_bridge_port *p);
bridge: range check STP parameters Apply restrictions on STP parameters based 802.1D 1998 standard. * Fixes missing locking in set path cost ioctl * Uses common code for both ioctl and sysfs This is based on an earlier patch Sasikanth V but with overhaul. Note: 1. It does NOT enforce the restriction on the relationship max_age and forward delay or hello time because in existing implementation these are set as independant operations. 2. If STP is disabled, there is no restriction on forward delay 3. No restriction on holding time because users use Linux code to act as hub or be sticky. 4. Although standard allow 0-255, Linux only allows 0-63 for port priority because more bits are reserved for port number. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-04 22:03:33 +08:00
extern int br_set_forward_delay(struct net_bridge *br, unsigned long x);
extern int br_set_hello_time(struct net_bridge *br, unsigned long x);
extern int br_set_max_age(struct net_bridge *br, unsigned long x);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* br_stp_if.c */
extern void br_stp_enable_bridge(struct net_bridge *br);
extern void br_stp_disable_bridge(struct net_bridge *br);
bridge: add support for user mode STP This patchset based on work by Aji_Srinivas@emc.com provides allows spanning tree to be controled from userspace. Like hotplug, it uses call_usermodehelper when spanning tree is enabled so there is no visible API change. If call to start usermode STP fails it falls back to existing kernel STP. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
2007-03-22 05:22:44 +08:00
extern void br_stp_set_enabled(struct net_bridge *br, unsigned long val);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
extern void br_stp_enable_port(struct net_bridge_port *p);
extern void br_stp_disable_port(struct net_bridge_port *p);
bridge: notify applications if address of bridge device changes The mac address of the bridge device may be changed when a new interface is added to the bridge. If this happens, then the bridge needs to call the network notifiers to tickle any other systems that care. Since bridge can be a module, this also means exporting the notifier function. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-24 21:24:01 +08:00
extern bool br_stp_recalculate_bridge_id(struct net_bridge *br);
[BRIDGE]: allow setting hardware address of bridge pseudo-dev Some people are using bridging to hide multiple machines from an ISP that restricts by MAC address. So in that case allow the bridge mac address to be set to any of the existing interfaces. I don't want to allow any arbitrary value and confuse STP. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-22 10:51:49 +08:00
extern void br_stp_change_bridge_id(struct net_bridge *br, const unsigned char *a);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
extern void br_stp_set_bridge_priority(struct net_bridge *br,
u16 newprio);
bridge: range check STP parameters Apply restrictions on STP parameters based 802.1D 1998 standard. * Fixes missing locking in set path cost ioctl * Uses common code for both ioctl and sysfs This is based on an earlier patch Sasikanth V but with overhaul. Note: 1. It does NOT enforce the restriction on the relationship max_age and forward delay or hello time because in existing implementation these are set as independant operations. 2. If STP is disabled, there is no restriction on forward delay 3. No restriction on holding time because users use Linux code to act as hub or be sticky. 4. Although standard allow 0-255, Linux only allows 0-63 for port priority because more bits are reserved for port number. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-04 22:03:33 +08:00
extern int br_stp_set_port_priority(struct net_bridge_port *p,
unsigned long newprio);
extern int br_stp_set_path_cost(struct net_bridge_port *p,
unsigned long path_cost);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
extern ssize_t br_show_bridge_id(char *buf, const struct bridge_id *id);
/* br_stp_bpdu.c */
bridge: Use STP demux Use the STP demux layer for receiving STP PDUs instead of directly registering with LLC. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-06 12:25:56 +08:00
struct stp_proto;
extern void br_stp_rcv(const struct stp_proto *proto, struct sk_buff *skb,
struct net_device *dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* br_stp_timer.c */
extern void br_stp_timer_init(struct net_bridge *br);
extern void br_stp_port_timer_init(struct net_bridge_port *p);
extern unsigned long br_timer_value(const struct timer_list *timer);
/* br.c */
net:bridge: use IS_ENABLED Use IS_ENABLED(CONFIG_FOO) instead of defined(CONFIG_FOO) || defined (CONFIG_FOO_MODULE) Signed-off-by: Igor Maravić <igorm@etf.rs> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-12 10:58:25 +08:00
#if IS_ENABLED(CONFIG_ATM_LANE)
bridge: Simplify interface for ATM LANE This patch changes FDB entry check for ATM LANE bridge integration. There's no point in holding a FDB entry around SKB building. br_fdb_get()/br_fdb_put() pair are changed into single br_fdb_test_addr() hook that checks if the addr has FDB entry pointing to other port to the one the request arrived on. FDB entry refcounting is removed as it's not used anywhere else. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-05 13:35:28 +08:00
extern int (*br_fdb_test_addr_hook)(struct net_device *dev, unsigned char *addr);
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[BRIDGE]: netlink interface for link management Add basic netlink support to the Ethernet bridge. Including: * dump interfaces in bridges * monitor link status changes * change state of bridge port For some demo programs see: http://developer.osdl.org/shemminger/prototypes/brnl.tar.gz These are to allow building a daemon that does alternative implementations of Spanning Tree Protocol. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-26 07:00:12 +08:00
/* br_netlink.c */
bridge: Assign rtnl_link_ops to bridge devices created via ioctl (v2) This ensures that bridges created with brctl(8) or ioctl(2) directly also carry IFLA_LINKINFO when dumped over netlink. This also allows to create a bridge with ioctl(2) and delete it with RTM_DELLINK. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-26 13:48:45 +08:00
extern struct rtnl_link_ops br_link_ops;
[BRIDGE]: Use rtnl registration interface Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-23 02:59:03 +08:00
extern int br_netlink_init(void);
[BRIDGE]: netlink interface for link management Add basic netlink support to the Ethernet bridge. Including: * dump interfaces in bridges * monitor link status changes * change state of bridge port For some demo programs see: http://developer.osdl.org/shemminger/prototypes/brnl.tar.gz These are to allow building a daemon that does alternative implementations of Spanning Tree Protocol. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-26 07:00:12 +08:00
extern void br_netlink_fini(void);
extern void br_ifinfo_notify(int event, struct net_bridge_port *port);
net: create generic bridge ops The PF_BRIDGE:RTM_{GET|SET}LINK nlmsg family and type are currently embedded in the ./net/bridge module. This prohibits them from being used by other bridging devices. One example of this being hardware that has embedded bridging components. In order to use these nlmsg types more generically this patch adds two net_device_ops hooks. One to set link bridge attributes and another to dump the current bride attributes. ndo_bridge_setlink() ndo_bridge_getlink() CC: Lennert Buytenhek <buytenh@wantstofly.org> CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-24 16:12:57 +08:00
extern int br_setlink(struct net_device *dev, struct nlmsghdr *nlmsg);
bridge: Add netlink interface to configure vlans on bridge ports Add a netlink interface to add and remove vlan configuration on bridge port. The interface uses the RTM_SETLINK message and encodes the vlan configuration inside the IFLA_AF_SPEC. It is possble to include multiple vlans to either add or remove in a single message. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:12 +08:00
extern int br_dellink(struct net_device *dev, struct nlmsghdr *nlmsg);
net: create generic bridge ops The PF_BRIDGE:RTM_{GET|SET}LINK nlmsg family and type are currently embedded in the ./net/bridge module. This prohibits them from being used by other bridging devices. One example of this being hardware that has embedded bridging components. In order to use these nlmsg types more generically this patch adds two net_device_ops hooks. One to set link bridge attributes and another to dump the current bride attributes. ndo_bridge_setlink() ndo_bridge_getlink() CC: Lennert Buytenhek <buytenh@wantstofly.org> CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-24 16:12:57 +08:00
extern int br_getlink(struct sk_buff *skb, u32 pid, u32 seq,
bridge: Dump vlan information from a bridge port Using the RTM_GETLINK dump the vlan filter list of a given bridge port. The information depends on setting the filter flag similar to how nic VF info is dumped. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-13 20:00:13 +08:00
struct net_device *dev, u32 filter_mask);
[BRIDGE]: netlink interface for link management Add basic netlink support to the Ethernet bridge. Including: * dump interfaces in bridges * monitor link status changes * change state of bridge port For some demo programs see: http://developer.osdl.org/shemminger/prototypes/brnl.tar.gz These are to allow building a daemon that does alternative implementations of Spanning Tree Protocol. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-26 07:00:12 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#ifdef CONFIG_SYSFS
/* br_sysfs_if.c */
Driver core: Constify struct sysfs_ops in struct kobj_type Constify struct sysfs_ops. This is part of the ops structure constification effort started by Arjan van de Ven et al. Benefits of this constification: * prevents modification of data that is shared (referenced) by many other structure instances at runtime * detects/prevents accidental (but not intentional) modification attempts on archs that enforce read-only kernel data at runtime * potentially better optimized code as the compiler can assume that the const data cannot be changed * the compiler/linker move const data into .rodata and therefore exclude them from false sharing Signed-off-by: Emese Revfy <re.emese@gmail.com> Acked-by: David Teigland <teigland@redhat.com> Acked-by: Matt Domsch <Matt_Domsch@dell.com> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Acked-by: Hans J. Koch <hjk@linutronix.de> Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Jens Axboe <jens.axboe@oracle.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-19 09:58:23 +08:00
extern const struct sysfs_ops brport_sysfs_ops;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
extern int br_sysfs_addif(struct net_bridge_port *p);
bridge: update sysfs link names if port device names have changed Links for each port are created in sysfs using the device name, but this could be changed after being added to the bridge. As well as being unable to remove interfaces after this occurs (because userspace tools don't recognise the new name, and the kernel won't recognise the old name), adding another interface with the old name to the bridge will cause an error trying to create the sysfs link. This fixes the problem by listening for NETDEV_CHANGENAME notifications and renaming the link. https://bugzilla.kernel.org/show_bug.cgi?id=12743 Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-10 17:31:11 +08:00
extern int br_sysfs_renameif(struct net_bridge_port *p);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* br_sysfs_br.c */
extern int br_sysfs_addbr(struct net_device *dev);
extern void br_sysfs_delbr(struct net_device *dev);
#else
bridge: Avoid 'statement with no effect' compiler warnings Instead of issuing (0) statements when !CONFIG_SYSFS which will cause 'warning: ', we'll use inline statements instead. This will effectively do the same thing, but suppress any unnecessary warnings. Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: bridge@lists.linux-foundation.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-04 06:02:30 +08:00
static inline int br_sysfs_addif(struct net_bridge_port *p) { return 0; }
static inline int br_sysfs_renameif(struct net_bridge_port *p) { return 0; }
static inline int br_sysfs_addbr(struct net_device *dev) { return 0; }
static inline void br_sysfs_delbr(struct net_device *dev) { return; }
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#endif /* CONFIG_SYSFS */
#endif