linux-sg2042/include/linux/firewire-cdev.h

1040 lines
43 KiB
C
Raw Normal View History

/*
* Char device interface.
*
* Copyright (C) 2005-2007 Kristian Hoegsberg <krh@bitplanet.net>
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*/
#ifndef _LINUX_FIREWIRE_CDEV_H
#define _LINUX_FIREWIRE_CDEV_H
#include <linux/ioctl.h>
#include <linux/types.h>
#include <linux/firewire-constants.h>
/* available since kernel version 2.6.22 */
#define FW_CDEV_EVENT_BUS_RESET 0x00
#define FW_CDEV_EVENT_RESPONSE 0x01
#define FW_CDEV_EVENT_REQUEST 0x02
#define FW_CDEV_EVENT_ISO_INTERRUPT 0x03
/* available since kernel version 2.6.30 */
#define FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED 0x04
#define FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED 0x05
firewire: cdev: fix ABI for FCP and address range mapping, add fw_cdev_event_request2 The problem: A target-like userspace driver, e.g. AV/C target or SBP-2/3 target, needs to be able to act as responder and requester. In the latter role, it needs to send requests to nods from which it received requests. This is currently impossible because fw_cdev_event_request lacks information about sender node ID. Reported-by: Jay Fenlason <fenlason@redhat.com> Libffado + libraw1394 + firewire-core is currently unable to drive two or more audio devices on the same bus. Reported-by: Arnold Krille <arnold@arnoldarts.de> This is because libffado requires destination node ID of FCP requests and sender node ID of FCP responses to match. It even prohibits libffado from working with a bus on which libraw1394 opens a /dev/fw* as default ioctl device that does not correspond with the audio device. This is because libraw1394 does not receive the sender node ID from the kernel. Moreover, fw_cdev_event_request makes it impossible to tell unicast and broadcast write requests apart. The fix: Add a replacement of struct fw_cdev_event_request request, boringly called struct fw_cdev_event_request2. The new event will be sent to a userspace client instead of the old one if the client claims compatibility with <linux/firewire-cdev.h> ABI version 4 or later. libraw1394 needs to be extended to make use of the new event, in order to properly support libffado and other FCP or address range mapping users who require correct sender node IDs. Further notes: While we are at it, change back the range of possible values of fw_cdev_event_request.tcode to 0x0...0xb like in ABI version <= 3. The preceding change "firewire: expose extended tcode of incoming lock requests to (userspace) drivers" expanded it to 0x0...0x17 which could catch sloppily coded clients by surprise. The extended range of codes is only used in the new fw_cdev_event_request2.tcode. Jay and I also suggested an alternative approach to fix the ABI for incoming requests: Add an FW_CDEV_IOC_GET_REQUEST_INFO ioctl which can be called after reception of an fw_cdev_event_request, before issuing of the closing FW_CDEV_IOC_SEND_RESPONSE ioctl. The new ioctl would reveal the vital information about a request that fw_cdev_event_request lacks. Jay showed an implementation of this approach. The former event approach adds 27 LOC of rather trivial code to core-cdev.c, the ioctl approach 34 LOC, some of which is nontrivial. The ioctl approach would certainly also add more LOC to userspace programs which require the expanded information on inbound requests. This approach is probably only on the lighter-weight side in case of clients that want to be compatible with kernels that lack the new capability, like libraw1394. However, the code to be added to such libraw1394-like clients in case of the event approach is a straight- forward additional switch () case in its event handler. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-06-21 04:53:55 +08:00
/* available since kernel version 2.6.36 */
#define FW_CDEV_EVENT_REQUEST2 0x06
#define FW_CDEV_EVENT_PHY_PACKET_SENT 0x07
#define FW_CDEV_EVENT_PHY_PACKET_RECEIVED 0x08
#define FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL 0x09
/**
* struct fw_cdev_event_common - Common part of all fw_cdev_event_ types
* @closure: For arbitrary use by userspace
* @type: Discriminates the fw_cdev_event_ types
*
* This struct may be used to access generic members of all fw_cdev_event_
* types regardless of the specific type.
*
* Data passed in the @closure field for a request will be returned in the
* corresponding event. It is big enough to hold a pointer on all platforms.
* The ioctl used to set @closure depends on the @type of event.
*/
struct fw_cdev_event_common {
__u64 closure;
__u32 type;
};
/**
* struct fw_cdev_event_bus_reset - Sent when a bus reset occurred
* @closure: See &fw_cdev_event_common; set by %FW_CDEV_IOC_GET_INFO ioctl
* @type: See &fw_cdev_event_common; always %FW_CDEV_EVENT_BUS_RESET
* @node_id: New node ID of this node
* @local_node_id: Node ID of the local node, i.e. of the controller
* @bm_node_id: Node ID of the bus manager
* @irm_node_id: Node ID of the iso resource manager
* @root_node_id: Node ID of the root node
* @generation: New bus generation
*
* This event is sent when the bus the device belongs to goes through a bus
* reset. It provides information about the new bus configuration, such as
* new node ID for this device, new root ID, and others.
*
* If @bm_node_id is 0xffff right after bus reset it can be reread by an
* %FW_CDEV_IOC_GET_INFO ioctl after bus manager selection was finished.
* Kernels with ABI version < 4 do not set @bm_node_id.
*/
struct fw_cdev_event_bus_reset {
__u64 closure;
__u32 type;
__u32 node_id;
__u32 local_node_id;
__u32 bm_node_id;
__u32 irm_node_id;
__u32 root_node_id;
__u32 generation;
};
/**
* struct fw_cdev_event_response - Sent when a response packet was received
* @closure: See &fw_cdev_event_common; set by %FW_CDEV_IOC_SEND_REQUEST
* or %FW_CDEV_IOC_SEND_BROADCAST_REQUEST
* or %FW_CDEV_IOC_SEND_STREAM_PACKET ioctl
* @type: See &fw_cdev_event_common; always %FW_CDEV_EVENT_RESPONSE
* @rcode: Response code returned by the remote node
* @length: Data length, i.e. the response's payload size in bytes
* @data: Payload data, if any
*
* This event is sent when the stack receives a response to an outgoing request
* sent by %FW_CDEV_IOC_SEND_REQUEST ioctl. The payload data for responses
* carrying data (read and lock responses) follows immediately and can be
* accessed through the @data field.
*
* The event is also generated after conclusions of transactions that do not
* involve response packets. This includes unified write transactions,
* broadcast write transactions, and transmission of asynchronous stream
* packets. @rcode indicates success or failure of such transmissions.
*/
struct fw_cdev_event_response {
__u64 closure;
__u32 type;
__u32 rcode;
__u32 length;
__u32 data[0];
};
/**
firewire: cdev: fix ABI for FCP and address range mapping, add fw_cdev_event_request2 The problem: A target-like userspace driver, e.g. AV/C target or SBP-2/3 target, needs to be able to act as responder and requester. In the latter role, it needs to send requests to nods from which it received requests. This is currently impossible because fw_cdev_event_request lacks information about sender node ID. Reported-by: Jay Fenlason <fenlason@redhat.com> Libffado + libraw1394 + firewire-core is currently unable to drive two or more audio devices on the same bus. Reported-by: Arnold Krille <arnold@arnoldarts.de> This is because libffado requires destination node ID of FCP requests and sender node ID of FCP responses to match. It even prohibits libffado from working with a bus on which libraw1394 opens a /dev/fw* as default ioctl device that does not correspond with the audio device. This is because libraw1394 does not receive the sender node ID from the kernel. Moreover, fw_cdev_event_request makes it impossible to tell unicast and broadcast write requests apart. The fix: Add a replacement of struct fw_cdev_event_request request, boringly called struct fw_cdev_event_request2. The new event will be sent to a userspace client instead of the old one if the client claims compatibility with <linux/firewire-cdev.h> ABI version 4 or later. libraw1394 needs to be extended to make use of the new event, in order to properly support libffado and other FCP or address range mapping users who require correct sender node IDs. Further notes: While we are at it, change back the range of possible values of fw_cdev_event_request.tcode to 0x0...0xb like in ABI version <= 3. The preceding change "firewire: expose extended tcode of incoming lock requests to (userspace) drivers" expanded it to 0x0...0x17 which could catch sloppily coded clients by surprise. The extended range of codes is only used in the new fw_cdev_event_request2.tcode. Jay and I also suggested an alternative approach to fix the ABI for incoming requests: Add an FW_CDEV_IOC_GET_REQUEST_INFO ioctl which can be called after reception of an fw_cdev_event_request, before issuing of the closing FW_CDEV_IOC_SEND_RESPONSE ioctl. The new ioctl would reveal the vital information about a request that fw_cdev_event_request lacks. Jay showed an implementation of this approach. The former event approach adds 27 LOC of rather trivial code to core-cdev.c, the ioctl approach 34 LOC, some of which is nontrivial. The ioctl approach would certainly also add more LOC to userspace programs which require the expanded information on inbound requests. This approach is probably only on the lighter-weight side in case of clients that want to be compatible with kernels that lack the new capability, like libraw1394. However, the code to be added to such libraw1394-like clients in case of the event approach is a straight- forward additional switch () case in its event handler. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-06-21 04:53:55 +08:00
* struct fw_cdev_event_request - Old version of &fw_cdev_event_request2
* @type: See &fw_cdev_event_common; always %FW_CDEV_EVENT_REQUEST
firewire: cdev: fix ABI for FCP and address range mapping, add fw_cdev_event_request2 The problem: A target-like userspace driver, e.g. AV/C target or SBP-2/3 target, needs to be able to act as responder and requester. In the latter role, it needs to send requests to nods from which it received requests. This is currently impossible because fw_cdev_event_request lacks information about sender node ID. Reported-by: Jay Fenlason <fenlason@redhat.com> Libffado + libraw1394 + firewire-core is currently unable to drive two or more audio devices on the same bus. Reported-by: Arnold Krille <arnold@arnoldarts.de> This is because libffado requires destination node ID of FCP requests and sender node ID of FCP responses to match. It even prohibits libffado from working with a bus on which libraw1394 opens a /dev/fw* as default ioctl device that does not correspond with the audio device. This is because libraw1394 does not receive the sender node ID from the kernel. Moreover, fw_cdev_event_request makes it impossible to tell unicast and broadcast write requests apart. The fix: Add a replacement of struct fw_cdev_event_request request, boringly called struct fw_cdev_event_request2. The new event will be sent to a userspace client instead of the old one if the client claims compatibility with <linux/firewire-cdev.h> ABI version 4 or later. libraw1394 needs to be extended to make use of the new event, in order to properly support libffado and other FCP or address range mapping users who require correct sender node IDs. Further notes: While we are at it, change back the range of possible values of fw_cdev_event_request.tcode to 0x0...0xb like in ABI version <= 3. The preceding change "firewire: expose extended tcode of incoming lock requests to (userspace) drivers" expanded it to 0x0...0x17 which could catch sloppily coded clients by surprise. The extended range of codes is only used in the new fw_cdev_event_request2.tcode. Jay and I also suggested an alternative approach to fix the ABI for incoming requests: Add an FW_CDEV_IOC_GET_REQUEST_INFO ioctl which can be called after reception of an fw_cdev_event_request, before issuing of the closing FW_CDEV_IOC_SEND_RESPONSE ioctl. The new ioctl would reveal the vital information about a request that fw_cdev_event_request lacks. Jay showed an implementation of this approach. The former event approach adds 27 LOC of rather trivial code to core-cdev.c, the ioctl approach 34 LOC, some of which is nontrivial. The ioctl approach would certainly also add more LOC to userspace programs which require the expanded information on inbound requests. This approach is probably only on the lighter-weight side in case of clients that want to be compatible with kernels that lack the new capability, like libraw1394. However, the code to be added to such libraw1394-like clients in case of the event approach is a straight- forward additional switch () case in its event handler. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-06-21 04:53:55 +08:00
*
* This event is sent instead of &fw_cdev_event_request2 if the kernel or
* the client implements ABI version <= 3. &fw_cdev_event_request lacks
* essential information; use &fw_cdev_event_request2 instead.
firewire: cdev: fix ABI for FCP and address range mapping, add fw_cdev_event_request2 The problem: A target-like userspace driver, e.g. AV/C target or SBP-2/3 target, needs to be able to act as responder and requester. In the latter role, it needs to send requests to nods from which it received requests. This is currently impossible because fw_cdev_event_request lacks information about sender node ID. Reported-by: Jay Fenlason <fenlason@redhat.com> Libffado + libraw1394 + firewire-core is currently unable to drive two or more audio devices on the same bus. Reported-by: Arnold Krille <arnold@arnoldarts.de> This is because libffado requires destination node ID of FCP requests and sender node ID of FCP responses to match. It even prohibits libffado from working with a bus on which libraw1394 opens a /dev/fw* as default ioctl device that does not correspond with the audio device. This is because libraw1394 does not receive the sender node ID from the kernel. Moreover, fw_cdev_event_request makes it impossible to tell unicast and broadcast write requests apart. The fix: Add a replacement of struct fw_cdev_event_request request, boringly called struct fw_cdev_event_request2. The new event will be sent to a userspace client instead of the old one if the client claims compatibility with <linux/firewire-cdev.h> ABI version 4 or later. libraw1394 needs to be extended to make use of the new event, in order to properly support libffado and other FCP or address range mapping users who require correct sender node IDs. Further notes: While we are at it, change back the range of possible values of fw_cdev_event_request.tcode to 0x0...0xb like in ABI version <= 3. The preceding change "firewire: expose extended tcode of incoming lock requests to (userspace) drivers" expanded it to 0x0...0x17 which could catch sloppily coded clients by surprise. The extended range of codes is only used in the new fw_cdev_event_request2.tcode. Jay and I also suggested an alternative approach to fix the ABI for incoming requests: Add an FW_CDEV_IOC_GET_REQUEST_INFO ioctl which can be called after reception of an fw_cdev_event_request, before issuing of the closing FW_CDEV_IOC_SEND_RESPONSE ioctl. The new ioctl would reveal the vital information about a request that fw_cdev_event_request lacks. Jay showed an implementation of this approach. The former event approach adds 27 LOC of rather trivial code to core-cdev.c, the ioctl approach 34 LOC, some of which is nontrivial. The ioctl approach would certainly also add more LOC to userspace programs which require the expanded information on inbound requests. This approach is probably only on the lighter-weight side in case of clients that want to be compatible with kernels that lack the new capability, like libraw1394. However, the code to be added to such libraw1394-like clients in case of the event approach is a straight- forward additional switch () case in its event handler. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-06-21 04:53:55 +08:00
*/
struct fw_cdev_event_request {
__u64 closure;
__u32 type;
__u32 tcode;
__u64 offset;
__u32 handle;
__u32 length;
__u32 data[0];
};
/**
* struct fw_cdev_event_request2 - Sent on incoming request to an address region
* @closure: See &fw_cdev_event_common; set by %FW_CDEV_IOC_ALLOCATE ioctl
* @type: See &fw_cdev_event_common; always %FW_CDEV_EVENT_REQUEST2
* @tcode: Transaction code of the incoming request
* @offset: The offset into the 48-bit per-node address space
firewire: cdev: fix ABI for FCP and address range mapping, add fw_cdev_event_request2 The problem: A target-like userspace driver, e.g. AV/C target or SBP-2/3 target, needs to be able to act as responder and requester. In the latter role, it needs to send requests to nods from which it received requests. This is currently impossible because fw_cdev_event_request lacks information about sender node ID. Reported-by: Jay Fenlason <fenlason@redhat.com> Libffado + libraw1394 + firewire-core is currently unable to drive two or more audio devices on the same bus. Reported-by: Arnold Krille <arnold@arnoldarts.de> This is because libffado requires destination node ID of FCP requests and sender node ID of FCP responses to match. It even prohibits libffado from working with a bus on which libraw1394 opens a /dev/fw* as default ioctl device that does not correspond with the audio device. This is because libraw1394 does not receive the sender node ID from the kernel. Moreover, fw_cdev_event_request makes it impossible to tell unicast and broadcast write requests apart. The fix: Add a replacement of struct fw_cdev_event_request request, boringly called struct fw_cdev_event_request2. The new event will be sent to a userspace client instead of the old one if the client claims compatibility with <linux/firewire-cdev.h> ABI version 4 or later. libraw1394 needs to be extended to make use of the new event, in order to properly support libffado and other FCP or address range mapping users who require correct sender node IDs. Further notes: While we are at it, change back the range of possible values of fw_cdev_event_request.tcode to 0x0...0xb like in ABI version <= 3. The preceding change "firewire: expose extended tcode of incoming lock requests to (userspace) drivers" expanded it to 0x0...0x17 which could catch sloppily coded clients by surprise. The extended range of codes is only used in the new fw_cdev_event_request2.tcode. Jay and I also suggested an alternative approach to fix the ABI for incoming requests: Add an FW_CDEV_IOC_GET_REQUEST_INFO ioctl which can be called after reception of an fw_cdev_event_request, before issuing of the closing FW_CDEV_IOC_SEND_RESPONSE ioctl. The new ioctl would reveal the vital information about a request that fw_cdev_event_request lacks. Jay showed an implementation of this approach. The former event approach adds 27 LOC of rather trivial code to core-cdev.c, the ioctl approach 34 LOC, some of which is nontrivial. The ioctl approach would certainly also add more LOC to userspace programs which require the expanded information on inbound requests. This approach is probably only on the lighter-weight side in case of clients that want to be compatible with kernels that lack the new capability, like libraw1394. However, the code to be added to such libraw1394-like clients in case of the event approach is a straight- forward additional switch () case in its event handler. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-06-21 04:53:55 +08:00
* @source_node_id: Sender node ID
* @destination_node_id: Destination node ID
* @card: The index of the card from which the request came
* @generation: Bus generation in which the request is valid
* @handle: Reference to the kernel-side pending request
* @length: Data length, i.e. the request's payload size in bytes
* @data: Incoming data, if any
*
* This event is sent when the stack receives an incoming request to an address
* region registered using the %FW_CDEV_IOC_ALLOCATE ioctl. The request is
* guaranteed to be completely contained in the specified region. Userspace is
* responsible for sending the response by %FW_CDEV_IOC_SEND_RESPONSE ioctl,
* using the same @handle.
*
* The payload data for requests carrying data (write and lock requests)
* follows immediately and can be accessed through the @data field.
firewire: cdev: fix ABI for FCP and address range mapping, add fw_cdev_event_request2 The problem: A target-like userspace driver, e.g. AV/C target or SBP-2/3 target, needs to be able to act as responder and requester. In the latter role, it needs to send requests to nods from which it received requests. This is currently impossible because fw_cdev_event_request lacks information about sender node ID. Reported-by: Jay Fenlason <fenlason@redhat.com> Libffado + libraw1394 + firewire-core is currently unable to drive two or more audio devices on the same bus. Reported-by: Arnold Krille <arnold@arnoldarts.de> This is because libffado requires destination node ID of FCP requests and sender node ID of FCP responses to match. It even prohibits libffado from working with a bus on which libraw1394 opens a /dev/fw* as default ioctl device that does not correspond with the audio device. This is because libraw1394 does not receive the sender node ID from the kernel. Moreover, fw_cdev_event_request makes it impossible to tell unicast and broadcast write requests apart. The fix: Add a replacement of struct fw_cdev_event_request request, boringly called struct fw_cdev_event_request2. The new event will be sent to a userspace client instead of the old one if the client claims compatibility with <linux/firewire-cdev.h> ABI version 4 or later. libraw1394 needs to be extended to make use of the new event, in order to properly support libffado and other FCP or address range mapping users who require correct sender node IDs. Further notes: While we are at it, change back the range of possible values of fw_cdev_event_request.tcode to 0x0...0xb like in ABI version <= 3. The preceding change "firewire: expose extended tcode of incoming lock requests to (userspace) drivers" expanded it to 0x0...0x17 which could catch sloppily coded clients by surprise. The extended range of codes is only used in the new fw_cdev_event_request2.tcode. Jay and I also suggested an alternative approach to fix the ABI for incoming requests: Add an FW_CDEV_IOC_GET_REQUEST_INFO ioctl which can be called after reception of an fw_cdev_event_request, before issuing of the closing FW_CDEV_IOC_SEND_RESPONSE ioctl. The new ioctl would reveal the vital information about a request that fw_cdev_event_request lacks. Jay showed an implementation of this approach. The former event approach adds 27 LOC of rather trivial code to core-cdev.c, the ioctl approach 34 LOC, some of which is nontrivial. The ioctl approach would certainly also add more LOC to userspace programs which require the expanded information on inbound requests. This approach is probably only on the lighter-weight side in case of clients that want to be compatible with kernels that lack the new capability, like libraw1394. However, the code to be added to such libraw1394-like clients in case of the event approach is a straight- forward additional switch () case in its event handler. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-06-21 04:53:55 +08:00
*
* Unlike &fw_cdev_event_request, @tcode of lock requests is one of the
* firewire-core specific %TCODE_LOCK_MASK_SWAP...%TCODE_LOCK_VENDOR_DEPENDENT,
* i.e. encodes the extended transaction code.
*
* @card may differ from &fw_cdev_get_info.card because requests are received
* from all cards of the Linux host. @source_node_id, @destination_node_id, and
* @generation pertain to that card. Destination node ID and bus generation may
* therefore differ from the corresponding fields of the last
* &fw_cdev_event_bus_reset.
*
* @destination_node_id may also differ from the current node ID because of a
* non-local bus ID part or in case of a broadcast write request. Note, a
* client must call an %FW_CDEV_IOC_SEND_RESPONSE ioctl even in case of a
* broadcast write request; the kernel will then release the kernel-side pending
* request but will not actually send a response packet.
*
* In case of a write request to FCP_REQUEST or FCP_RESPONSE, the kernel already
* sent a write response immediately after the request was received; in this
* case the client must still call an %FW_CDEV_IOC_SEND_RESPONSE ioctl to
* release the kernel-side pending request, though another response won't be
* sent.
*
* If the client subsequently needs to initiate requests to the sender node of
* an &fw_cdev_event_request2, it needs to use a device file with matching
* card index, node ID, and generation for outbound requests.
*/
firewire: cdev: fix ABI for FCP and address range mapping, add fw_cdev_event_request2 The problem: A target-like userspace driver, e.g. AV/C target or SBP-2/3 target, needs to be able to act as responder and requester. In the latter role, it needs to send requests to nods from which it received requests. This is currently impossible because fw_cdev_event_request lacks information about sender node ID. Reported-by: Jay Fenlason <fenlason@redhat.com> Libffado + libraw1394 + firewire-core is currently unable to drive two or more audio devices on the same bus. Reported-by: Arnold Krille <arnold@arnoldarts.de> This is because libffado requires destination node ID of FCP requests and sender node ID of FCP responses to match. It even prohibits libffado from working with a bus on which libraw1394 opens a /dev/fw* as default ioctl device that does not correspond with the audio device. This is because libraw1394 does not receive the sender node ID from the kernel. Moreover, fw_cdev_event_request makes it impossible to tell unicast and broadcast write requests apart. The fix: Add a replacement of struct fw_cdev_event_request request, boringly called struct fw_cdev_event_request2. The new event will be sent to a userspace client instead of the old one if the client claims compatibility with <linux/firewire-cdev.h> ABI version 4 or later. libraw1394 needs to be extended to make use of the new event, in order to properly support libffado and other FCP or address range mapping users who require correct sender node IDs. Further notes: While we are at it, change back the range of possible values of fw_cdev_event_request.tcode to 0x0...0xb like in ABI version <= 3. The preceding change "firewire: expose extended tcode of incoming lock requests to (userspace) drivers" expanded it to 0x0...0x17 which could catch sloppily coded clients by surprise. The extended range of codes is only used in the new fw_cdev_event_request2.tcode. Jay and I also suggested an alternative approach to fix the ABI for incoming requests: Add an FW_CDEV_IOC_GET_REQUEST_INFO ioctl which can be called after reception of an fw_cdev_event_request, before issuing of the closing FW_CDEV_IOC_SEND_RESPONSE ioctl. The new ioctl would reveal the vital information about a request that fw_cdev_event_request lacks. Jay showed an implementation of this approach. The former event approach adds 27 LOC of rather trivial code to core-cdev.c, the ioctl approach 34 LOC, some of which is nontrivial. The ioctl approach would certainly also add more LOC to userspace programs which require the expanded information on inbound requests. This approach is probably only on the lighter-weight side in case of clients that want to be compatible with kernels that lack the new capability, like libraw1394. However, the code to be added to such libraw1394-like clients in case of the event approach is a straight- forward additional switch () case in its event handler. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-06-21 04:53:55 +08:00
struct fw_cdev_event_request2 {
__u64 closure;
__u32 type;
__u32 tcode;
__u64 offset;
firewire: cdev: fix ABI for FCP and address range mapping, add fw_cdev_event_request2 The problem: A target-like userspace driver, e.g. AV/C target or SBP-2/3 target, needs to be able to act as responder and requester. In the latter role, it needs to send requests to nods from which it received requests. This is currently impossible because fw_cdev_event_request lacks information about sender node ID. Reported-by: Jay Fenlason <fenlason@redhat.com> Libffado + libraw1394 + firewire-core is currently unable to drive two or more audio devices on the same bus. Reported-by: Arnold Krille <arnold@arnoldarts.de> This is because libffado requires destination node ID of FCP requests and sender node ID of FCP responses to match. It even prohibits libffado from working with a bus on which libraw1394 opens a /dev/fw* as default ioctl device that does not correspond with the audio device. This is because libraw1394 does not receive the sender node ID from the kernel. Moreover, fw_cdev_event_request makes it impossible to tell unicast and broadcast write requests apart. The fix: Add a replacement of struct fw_cdev_event_request request, boringly called struct fw_cdev_event_request2. The new event will be sent to a userspace client instead of the old one if the client claims compatibility with <linux/firewire-cdev.h> ABI version 4 or later. libraw1394 needs to be extended to make use of the new event, in order to properly support libffado and other FCP or address range mapping users who require correct sender node IDs. Further notes: While we are at it, change back the range of possible values of fw_cdev_event_request.tcode to 0x0...0xb like in ABI version <= 3. The preceding change "firewire: expose extended tcode of incoming lock requests to (userspace) drivers" expanded it to 0x0...0x17 which could catch sloppily coded clients by surprise. The extended range of codes is only used in the new fw_cdev_event_request2.tcode. Jay and I also suggested an alternative approach to fix the ABI for incoming requests: Add an FW_CDEV_IOC_GET_REQUEST_INFO ioctl which can be called after reception of an fw_cdev_event_request, before issuing of the closing FW_CDEV_IOC_SEND_RESPONSE ioctl. The new ioctl would reveal the vital information about a request that fw_cdev_event_request lacks. Jay showed an implementation of this approach. The former event approach adds 27 LOC of rather trivial code to core-cdev.c, the ioctl approach 34 LOC, some of which is nontrivial. The ioctl approach would certainly also add more LOC to userspace programs which require the expanded information on inbound requests. This approach is probably only on the lighter-weight side in case of clients that want to be compatible with kernels that lack the new capability, like libraw1394. However, the code to be added to such libraw1394-like clients in case of the event approach is a straight- forward additional switch () case in its event handler. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-06-21 04:53:55 +08:00
__u32 source_node_id;
__u32 destination_node_id;
__u32 card;
__u32 generation;
__u32 handle;
__u32 length;
__u32 data[0];
};
/**
* struct fw_cdev_event_iso_interrupt - Sent when an iso packet was completed
* @closure: See &fw_cdev_event_common;
* set by %FW_CDEV_CREATE_ISO_CONTEXT ioctl
* @type: See &fw_cdev_event_common; always %FW_CDEV_EVENT_ISO_INTERRUPT
* @cycle: Cycle counter of the last completed packet
* @header_length: Total length of following headers, in bytes
* @header: Stripped headers, if any
*
* This event is sent when the controller has completed an &fw_cdev_iso_packet
* with the %FW_CDEV_ISO_INTERRUPT bit set, when explicitly requested with
* %FW_CDEV_IOC_FLUSH_ISO, or when there have been so many completed packets
* without the interrupt bit set that the kernel's internal buffer for @header
* is about to overflow. (In the last case, kernels with ABI version < 5 drop
* header data up to the next interrupt packet.)
*
* Isochronous transmit events (context type %FW_CDEV_ISO_CONTEXT_TRANSMIT):
*
* In version 3 and some implementations of version 2 of the ABI, &header_length
* is a multiple of 4 and &header contains timestamps of all packets up until
* the interrupt packet. The format of the timestamps is as described below for
* isochronous reception. In version 1 of the ABI, &header_length was 0.
*
* Isochronous receive events (context type %FW_CDEV_ISO_CONTEXT_RECEIVE):
*
* The headers stripped of all packets up until and including the interrupt
* packet are returned in the @header field. The amount of header data per
* packet is as specified at iso context creation by
* &fw_cdev_create_iso_context.header_size.
*
* Hence, _interrupt.header_length / _context.header_size is the number of
* packets received in this interrupt event. The client can now iterate
* through the mmap()'ed DMA buffer according to this number of packets and
* to the buffer sizes as the client specified in &fw_cdev_queue_iso.
*
* Since version 2 of this ABI, the portion for each packet in _interrupt.header
* consists of the 1394 isochronous packet header, followed by a timestamp
* quadlet if &fw_cdev_create_iso_context.header_size > 4, followed by quadlets
* from the packet payload if &fw_cdev_create_iso_context.header_size > 8.
*
* Format of 1394 iso packet header: 16 bits data_length, 2 bits tag, 6 bits
* channel, 4 bits tcode, 4 bits sy, in big endian byte order.
* data_length is the actual received size of the packet without the four
* 1394 iso packet header bytes.
*
* Format of timestamp: 16 bits invalid, 3 bits cycleSeconds, 13 bits
* cycleCount, in big endian byte order.
*
* In version 1 of the ABI, no timestamp quadlet was inserted; instead, payload
* data followed directly after the 1394 is header if header_size > 4.
* Behaviour of ver. 1 of this ABI is no longer available since ABI ver. 2.
*/
struct fw_cdev_event_iso_interrupt {
__u64 closure;
__u32 type;
__u32 cycle;
__u32 header_length;
__u32 header[0];
};
/**
* struct fw_cdev_event_iso_interrupt_mc - An iso buffer chunk was completed
* @closure: See &fw_cdev_event_common;
* set by %FW_CDEV_CREATE_ISO_CONTEXT ioctl
* @type: %FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL
* @completed: Offset into the receive buffer; data before this offset is valid
*
* This event is sent in multichannel contexts (context type
* %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL) for &fw_cdev_iso_packet buffer
* chunks that have been completely filled and that have the
* %FW_CDEV_ISO_INTERRUPT bit set, or when explicitly requested with
* %FW_CDEV_IOC_FLUSH_ISO.
*
* The buffer is continuously filled with the following data, per packet:
* - the 1394 iso packet header as described at &fw_cdev_event_iso_interrupt,
* but in little endian byte order,
* - packet payload (as many bytes as specified in the data_length field of
* the 1394 iso packet header) in big endian byte order,
* - 0...3 padding bytes as needed to align the following trailer quadlet,
* - trailer quadlet, containing the reception timestamp as described at
* &fw_cdev_event_iso_interrupt, but in little endian byte order.
*
* Hence the per-packet size is data_length (rounded up to a multiple of 4) + 8.
* When processing the data, stop before a packet that would cross the
* @completed offset.
*
* A packet near the end of a buffer chunk will typically spill over into the
* next queued buffer chunk. It is the responsibility of the client to check
* for this condition, assemble a broken-up packet from its parts, and not to
* re-queue any buffer chunks in which as yet unread packet parts reside.
*/
struct fw_cdev_event_iso_interrupt_mc {
__u64 closure;
__u32 type;
__u32 completed;
};
/**
* struct fw_cdev_event_iso_resource - Iso resources were allocated or freed
* @closure: See &fw_cdev_event_common;
* set by %FW_CDEV_IOC_(DE)ALLOCATE_ISO_RESOURCE(_ONCE) ioctl
* @type: %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED or
* %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED
* @handle: Reference by which an allocated resource can be deallocated
* @channel: Isochronous channel which was (de)allocated, if any
* @bandwidth: Bandwidth allocation units which were (de)allocated, if any
*
* An %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED event is sent after an isochronous
* resource was allocated at the IRM. The client has to check @channel and
* @bandwidth for whether the allocation actually succeeded.
*
* An %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event is sent after an isochronous
* resource was deallocated at the IRM. It is also sent when automatic
* reallocation after a bus reset failed.
*
* @channel is <0 if no channel was (de)allocated or if reallocation failed.
* @bandwidth is 0 if no bandwidth was (de)allocated or if reallocation failed.
*/
struct fw_cdev_event_iso_resource {
__u64 closure;
__u32 type;
__u32 handle;
__s32 channel;
__s32 bandwidth;
};
firewire: cdev: add PHY packet transmission Add an FW_CDEV_IOC_SEND_PHY_PACKET ioctl() for /dev/fw* which can be used to implement bus management related functionality in userspace. This is also half of the functionality (the transmit part) that is needed to support a userspace implementation of a VersaPHY transaction layer. Safety considerations: - PHY packets are generally broadcasts and may have interesting effects on PHYs and the bus, e.g. make asynchronous arbitration impossible due to too low gap count. Hence some kind of elevated privileges should be required of a process to be able to send PHY packets. This implementation assumes that a process that is allowed to open the /dev/fw* of a local node does have this privilege. There was an inconclusive discussion about introducing POSIX capabilities as a means to check for user privileges for these kinds of operations. - The kernel does not check integrity of the supplied packet data. That would be far too much code, considering the many kinds of PHY packets. A process which got the privilege to send these packets is trusted to do it correctly. Just like with the other "send packet" ioctls, a non-blocking API is chosen; i.e. the ioctl may return even before AT DMA started. After transmission, an event for poll()/read() is enqueued. Most users are going to need a blocking API, but a blocking userspace wrapper is easy to implement, and the second of the two existing libraw1394 calls raw1394_phy_packet_write() and raw1394_start_phy_packet_write() can be better supported that way. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-07-17 04:25:14 +08:00
/**
* struct fw_cdev_event_phy_packet - A PHY packet was transmitted or received
* @closure: See &fw_cdev_event_common; set by %FW_CDEV_IOC_SEND_PHY_PACKET
* or %FW_CDEV_IOC_RECEIVE_PHY_PACKETS ioctl
* @type: %FW_CDEV_EVENT_PHY_PACKET_SENT or %..._RECEIVED
firewire: cdev: add PHY packet transmission Add an FW_CDEV_IOC_SEND_PHY_PACKET ioctl() for /dev/fw* which can be used to implement bus management related functionality in userspace. This is also half of the functionality (the transmit part) that is needed to support a userspace implementation of a VersaPHY transaction layer. Safety considerations: - PHY packets are generally broadcasts and may have interesting effects on PHYs and the bus, e.g. make asynchronous arbitration impossible due to too low gap count. Hence some kind of elevated privileges should be required of a process to be able to send PHY packets. This implementation assumes that a process that is allowed to open the /dev/fw* of a local node does have this privilege. There was an inconclusive discussion about introducing POSIX capabilities as a means to check for user privileges for these kinds of operations. - The kernel does not check integrity of the supplied packet data. That would be far too much code, considering the many kinds of PHY packets. A process which got the privilege to send these packets is trusted to do it correctly. Just like with the other "send packet" ioctls, a non-blocking API is chosen; i.e. the ioctl may return even before AT DMA started. After transmission, an event for poll()/read() is enqueued. Most users are going to need a blocking API, but a blocking userspace wrapper is easy to implement, and the second of the two existing libraw1394 calls raw1394_phy_packet_write() and raw1394_start_phy_packet_write() can be better supported that way. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-07-17 04:25:14 +08:00
* @rcode: %RCODE_..., indicates success or failure of transmission
* @length: Data length in bytes
* @data: Incoming data
*
* If @type is %FW_CDEV_EVENT_PHY_PACKET_SENT, @length is 0 and @data empty,
* except in case of a ping packet: Then, @length is 4, and @data[0] is the
* ping time in 49.152MHz clocks if @rcode is %RCODE_COMPLETE.
*
* If @type is %FW_CDEV_EVENT_PHY_PACKET_RECEIVED, @length is 8 and @data
* consists of the two PHY packet quadlets, in host byte order.
firewire: cdev: add PHY packet transmission Add an FW_CDEV_IOC_SEND_PHY_PACKET ioctl() for /dev/fw* which can be used to implement bus management related functionality in userspace. This is also half of the functionality (the transmit part) that is needed to support a userspace implementation of a VersaPHY transaction layer. Safety considerations: - PHY packets are generally broadcasts and may have interesting effects on PHYs and the bus, e.g. make asynchronous arbitration impossible due to too low gap count. Hence some kind of elevated privileges should be required of a process to be able to send PHY packets. This implementation assumes that a process that is allowed to open the /dev/fw* of a local node does have this privilege. There was an inconclusive discussion about introducing POSIX capabilities as a means to check for user privileges for these kinds of operations. - The kernel does not check integrity of the supplied packet data. That would be far too much code, considering the many kinds of PHY packets. A process which got the privilege to send these packets is trusted to do it correctly. Just like with the other "send packet" ioctls, a non-blocking API is chosen; i.e. the ioctl may return even before AT DMA started. After transmission, an event for poll()/read() is enqueued. Most users are going to need a blocking API, but a blocking userspace wrapper is easy to implement, and the second of the two existing libraw1394 calls raw1394_phy_packet_write() and raw1394_start_phy_packet_write() can be better supported that way. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-07-17 04:25:14 +08:00
*/
struct fw_cdev_event_phy_packet {
__u64 closure;
__u32 type;
__u32 rcode;
__u32 length;
__u32 data[0];
firewire: cdev: add PHY packet transmission Add an FW_CDEV_IOC_SEND_PHY_PACKET ioctl() for /dev/fw* which can be used to implement bus management related functionality in userspace. This is also half of the functionality (the transmit part) that is needed to support a userspace implementation of a VersaPHY transaction layer. Safety considerations: - PHY packets are generally broadcasts and may have interesting effects on PHYs and the bus, e.g. make asynchronous arbitration impossible due to too low gap count. Hence some kind of elevated privileges should be required of a process to be able to send PHY packets. This implementation assumes that a process that is allowed to open the /dev/fw* of a local node does have this privilege. There was an inconclusive discussion about introducing POSIX capabilities as a means to check for user privileges for these kinds of operations. - The kernel does not check integrity of the supplied packet data. That would be far too much code, considering the many kinds of PHY packets. A process which got the privilege to send these packets is trusted to do it correctly. Just like with the other "send packet" ioctls, a non-blocking API is chosen; i.e. the ioctl may return even before AT DMA started. After transmission, an event for poll()/read() is enqueued. Most users are going to need a blocking API, but a blocking userspace wrapper is easy to implement, and the second of the two existing libraw1394 calls raw1394_phy_packet_write() and raw1394_start_phy_packet_write() can be better supported that way. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-07-17 04:25:14 +08:00
};
/**
* union fw_cdev_event - Convenience union of fw_cdev_event_ types
* @common: Valid for all types
* @bus_reset: Valid if @common.type == %FW_CDEV_EVENT_BUS_RESET
* @response: Valid if @common.type == %FW_CDEV_EVENT_RESPONSE
* @request: Valid if @common.type == %FW_CDEV_EVENT_REQUEST
* @request2: Valid if @common.type == %FW_CDEV_EVENT_REQUEST2
* @iso_interrupt: Valid if @common.type == %FW_CDEV_EVENT_ISO_INTERRUPT
* @iso_interrupt_mc: Valid if @common.type ==
* %FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL
* @iso_resource: Valid if @common.type ==
* %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED or
* %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED
* @phy_packet: Valid if @common.type ==
* %FW_CDEV_EVENT_PHY_PACKET_SENT or
* %FW_CDEV_EVENT_PHY_PACKET_RECEIVED
*
* Convenience union for userspace use. Events could be read(2) into an
* appropriately aligned char buffer and then cast to this union for further
* processing. Note that for a request, response or iso_interrupt event,
* the data[] or header[] may make the size of the full event larger than
* sizeof(union fw_cdev_event). Also note that if you attempt to read(2)
* an event into a buffer that is not large enough for it, the data that does
* not fit will be discarded so that the next read(2) will return a new event.
*/
union fw_cdev_event {
struct fw_cdev_event_common common;
struct fw_cdev_event_bus_reset bus_reset;
struct fw_cdev_event_response response;
struct fw_cdev_event_request request;
struct fw_cdev_event_request2 request2; /* added in 2.6.36 */
struct fw_cdev_event_iso_interrupt iso_interrupt;
struct fw_cdev_event_iso_interrupt_mc iso_interrupt_mc; /* added in 2.6.36 */
struct fw_cdev_event_iso_resource iso_resource; /* added in 2.6.30 */
struct fw_cdev_event_phy_packet phy_packet; /* added in 2.6.36 */
};
/* available since kernel version 2.6.22 */
#define FW_CDEV_IOC_GET_INFO _IOWR('#', 0x00, struct fw_cdev_get_info)
#define FW_CDEV_IOC_SEND_REQUEST _IOW('#', 0x01, struct fw_cdev_send_request)
#define FW_CDEV_IOC_ALLOCATE _IOWR('#', 0x02, struct fw_cdev_allocate)
#define FW_CDEV_IOC_DEALLOCATE _IOW('#', 0x03, struct fw_cdev_deallocate)
#define FW_CDEV_IOC_SEND_RESPONSE _IOW('#', 0x04, struct fw_cdev_send_response)
#define FW_CDEV_IOC_INITIATE_BUS_RESET _IOW('#', 0x05, struct fw_cdev_initiate_bus_reset)
#define FW_CDEV_IOC_ADD_DESCRIPTOR _IOWR('#', 0x06, struct fw_cdev_add_descriptor)
#define FW_CDEV_IOC_REMOVE_DESCRIPTOR _IOW('#', 0x07, struct fw_cdev_remove_descriptor)
#define FW_CDEV_IOC_CREATE_ISO_CONTEXT _IOWR('#', 0x08, struct fw_cdev_create_iso_context)
#define FW_CDEV_IOC_QUEUE_ISO _IOWR('#', 0x09, struct fw_cdev_queue_iso)
#define FW_CDEV_IOC_START_ISO _IOW('#', 0x0a, struct fw_cdev_start_iso)
#define FW_CDEV_IOC_STOP_ISO _IOW('#', 0x0b, struct fw_cdev_stop_iso)
/* available since kernel version 2.6.24 */
#define FW_CDEV_IOC_GET_CYCLE_TIMER _IOR('#', 0x0c, struct fw_cdev_get_cycle_timer)
/* available since kernel version 2.6.30 */
#define FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE _IOWR('#', 0x0d, struct fw_cdev_allocate_iso_resource)
#define FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE _IOW('#', 0x0e, struct fw_cdev_deallocate)
#define FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE _IOW('#', 0x0f, struct fw_cdev_allocate_iso_resource)
#define FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE_ONCE _IOW('#', 0x10, struct fw_cdev_allocate_iso_resource)
#define FW_CDEV_IOC_GET_SPEED _IO('#', 0x11) /* returns speed code */
#define FW_CDEV_IOC_SEND_BROADCAST_REQUEST _IOW('#', 0x12, struct fw_cdev_send_request)
#define FW_CDEV_IOC_SEND_STREAM_PACKET _IOW('#', 0x13, struct fw_cdev_send_stream_packet)
/* available since kernel version 2.6.34 */
#define FW_CDEV_IOC_GET_CYCLE_TIMER2 _IOWR('#', 0x14, struct fw_cdev_get_cycle_timer2)
firewire: cdev: add PHY packet transmission Add an FW_CDEV_IOC_SEND_PHY_PACKET ioctl() for /dev/fw* which can be used to implement bus management related functionality in userspace. This is also half of the functionality (the transmit part) that is needed to support a userspace implementation of a VersaPHY transaction layer. Safety considerations: - PHY packets are generally broadcasts and may have interesting effects on PHYs and the bus, e.g. make asynchronous arbitration impossible due to too low gap count. Hence some kind of elevated privileges should be required of a process to be able to send PHY packets. This implementation assumes that a process that is allowed to open the /dev/fw* of a local node does have this privilege. There was an inconclusive discussion about introducing POSIX capabilities as a means to check for user privileges for these kinds of operations. - The kernel does not check integrity of the supplied packet data. That would be far too much code, considering the many kinds of PHY packets. A process which got the privilege to send these packets is trusted to do it correctly. Just like with the other "send packet" ioctls, a non-blocking API is chosen; i.e. the ioctl may return even before AT DMA started. After transmission, an event for poll()/read() is enqueued. Most users are going to need a blocking API, but a blocking userspace wrapper is easy to implement, and the second of the two existing libraw1394 calls raw1394_phy_packet_write() and raw1394_start_phy_packet_write() can be better supported that way. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-07-17 04:25:14 +08:00
/* available since kernel version 2.6.36 */
#define FW_CDEV_IOC_SEND_PHY_PACKET _IOWR('#', 0x15, struct fw_cdev_send_phy_packet)
#define FW_CDEV_IOC_RECEIVE_PHY_PACKETS _IOW('#', 0x16, struct fw_cdev_receive_phy_packets)
#define FW_CDEV_IOC_SET_ISO_CHANNELS _IOW('#', 0x17, struct fw_cdev_set_iso_channels)
firewire: cdev: add PHY packet transmission Add an FW_CDEV_IOC_SEND_PHY_PACKET ioctl() for /dev/fw* which can be used to implement bus management related functionality in userspace. This is also half of the functionality (the transmit part) that is needed to support a userspace implementation of a VersaPHY transaction layer. Safety considerations: - PHY packets are generally broadcasts and may have interesting effects on PHYs and the bus, e.g. make asynchronous arbitration impossible due to too low gap count. Hence some kind of elevated privileges should be required of a process to be able to send PHY packets. This implementation assumes that a process that is allowed to open the /dev/fw* of a local node does have this privilege. There was an inconclusive discussion about introducing POSIX capabilities as a means to check for user privileges for these kinds of operations. - The kernel does not check integrity of the supplied packet data. That would be far too much code, considering the many kinds of PHY packets. A process which got the privilege to send these packets is trusted to do it correctly. Just like with the other "send packet" ioctls, a non-blocking API is chosen; i.e. the ioctl may return even before AT DMA started. After transmission, an event for poll()/read() is enqueued. Most users are going to need a blocking API, but a blocking userspace wrapper is easy to implement, and the second of the two existing libraw1394 calls raw1394_phy_packet_write() and raw1394_start_phy_packet_write() can be better supported that way. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-07-17 04:25:14 +08:00
/* available since kernel version 3.4 */
#define FW_CDEV_IOC_FLUSH_ISO _IOW('#', 0x18, struct fw_cdev_flush_iso)
/*
* ABI version history
* 1 (2.6.22) - initial version
* (2.6.24) - added %FW_CDEV_IOC_GET_CYCLE_TIMER
* 2 (2.6.30) - changed &fw_cdev_event_iso_interrupt.header if
* &fw_cdev_create_iso_context.header_size is 8 or more
* - added %FW_CDEV_IOC_*_ISO_RESOURCE*,
* %FW_CDEV_IOC_GET_SPEED, %FW_CDEV_IOC_SEND_BROADCAST_REQUEST,
* %FW_CDEV_IOC_SEND_STREAM_PACKET
* (2.6.32) - added time stamp to xmit &fw_cdev_event_iso_interrupt
* (2.6.33) - IR has always packet-per-buffer semantics now, not one of
* dual-buffer or packet-per-buffer depending on hardware
firewire: cdev: fix ABI for FCP and address range mapping, add fw_cdev_event_request2 The problem: A target-like userspace driver, e.g. AV/C target or SBP-2/3 target, needs to be able to act as responder and requester. In the latter role, it needs to send requests to nods from which it received requests. This is currently impossible because fw_cdev_event_request lacks information about sender node ID. Reported-by: Jay Fenlason <fenlason@redhat.com> Libffado + libraw1394 + firewire-core is currently unable to drive two or more audio devices on the same bus. Reported-by: Arnold Krille <arnold@arnoldarts.de> This is because libffado requires destination node ID of FCP requests and sender node ID of FCP responses to match. It even prohibits libffado from working with a bus on which libraw1394 opens a /dev/fw* as default ioctl device that does not correspond with the audio device. This is because libraw1394 does not receive the sender node ID from the kernel. Moreover, fw_cdev_event_request makes it impossible to tell unicast and broadcast write requests apart. The fix: Add a replacement of struct fw_cdev_event_request request, boringly called struct fw_cdev_event_request2. The new event will be sent to a userspace client instead of the old one if the client claims compatibility with <linux/firewire-cdev.h> ABI version 4 or later. libraw1394 needs to be extended to make use of the new event, in order to properly support libffado and other FCP or address range mapping users who require correct sender node IDs. Further notes: While we are at it, change back the range of possible values of fw_cdev_event_request.tcode to 0x0...0xb like in ABI version <= 3. The preceding change "firewire: expose extended tcode of incoming lock requests to (userspace) drivers" expanded it to 0x0...0x17 which could catch sloppily coded clients by surprise. The extended range of codes is only used in the new fw_cdev_event_request2.tcode. Jay and I also suggested an alternative approach to fix the ABI for incoming requests: Add an FW_CDEV_IOC_GET_REQUEST_INFO ioctl which can be called after reception of an fw_cdev_event_request, before issuing of the closing FW_CDEV_IOC_SEND_RESPONSE ioctl. The new ioctl would reveal the vital information about a request that fw_cdev_event_request lacks. Jay showed an implementation of this approach. The former event approach adds 27 LOC of rather trivial code to core-cdev.c, the ioctl approach 34 LOC, some of which is nontrivial. The ioctl approach would certainly also add more LOC to userspace programs which require the expanded information on inbound requests. This approach is probably only on the lighter-weight side in case of clients that want to be compatible with kernels that lack the new capability, like libraw1394. However, the code to be added to such libraw1394-like clients in case of the event approach is a straight- forward additional switch () case in its event handler. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-06-21 04:53:55 +08:00
* - shared use and auto-response for FCP registers
* 3 (2.6.34) - made &fw_cdev_get_cycle_timer reliable
* - added %FW_CDEV_IOC_GET_CYCLE_TIMER2
* 4 (2.6.36) - added %FW_CDEV_EVENT_REQUEST2, %FW_CDEV_EVENT_PHY_PACKET_*,
* and &fw_cdev_allocate.region_end
* - implemented &fw_cdev_event_bus_reset.bm_node_id
* - added %FW_CDEV_IOC_SEND_PHY_PACKET, _RECEIVE_PHY_PACKETS
* - added %FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL,
* %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL, and
* %FW_CDEV_IOC_SET_ISO_CHANNELS
* 5 (3.4) - send %FW_CDEV_EVENT_ISO_INTERRUPT events when needed to
* avoid dropping data
* - added %FW_CDEV_IOC_FLUSH_ISO
*/
/**
* struct fw_cdev_get_info - General purpose information ioctl
* @version: The version field is just a running serial number. Both an
* input parameter (ABI version implemented by the client) and
* output parameter (ABI version implemented by the kernel).
* A client shall fill in the ABI @version for which the client
* was implemented. This is necessary for forward compatibility.
* @rom_length: If @rom is non-zero, up to @rom_length bytes of Configuration
* ROM will be copied into that user space address. In either
* case, @rom_length is updated with the actual length of the
* Configuration ROM.
* @rom: If non-zero, address of a buffer to be filled by a copy of the
* device's Configuration ROM
* @bus_reset: If non-zero, address of a buffer to be filled by a
* &struct fw_cdev_event_bus_reset with the current state
* of the bus. This does not cause a bus reset to happen.
* @bus_reset_closure: Value of &closure in this and subsequent bus reset events
* @card: The index of the card this device belongs to
firewire: cdev: prevent race between first get_info ioctl and bus reset event queuing Between open(2) of a /dev/fw* and the first FW_CDEV_IOC_GET_INFO ioctl(2) on it, the kernel already queues FW_CDEV_EVENT_BUS_RESET events to be read(2) by the client. The get_info ioctl is practically always issued right away after open, hence this condition only occurs if the client opens during a bus reset, especially during a rapid series of bus resets. The problem with this condition is twofold: - These bus reset events carry the (as yet undocumented) @closure value of 0. But it is not the kernel's place to choose closures; they are privat to the client. E.g., this 0 value forced from the kernel makes it unsafe for clients to dereference it as a pointer to a closure object without NULL pointer check. - It is impossible for clients to determine the relative order of bus reset events from get_info ioctl(2) versus those from read(2), except in one way: By comparison of closure values. Again, such a procedure imposes complexity on clients and reduces freedom in use of the bus reset closure. So, change the ABI to suppress queuing of bus reset events before the first FW_CDEV_IOC_GET_INFO ioctl was issued by the client. Note, this ABI change cannot be version-controlled. The kernel cannot distinguish old from new clients before the first FW_CDEV_IOC_GET_INFO ioctl. We will try to back-merge this change into currently maintained stable/ longterm series, and we only document the new behaviour. The old behavior is now considered a kernel bug, which it basically is. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: <stable@kernel.org>
2011-07-09 22:43:22 +08:00
*
* The %FW_CDEV_IOC_GET_INFO ioctl is usually the very first one which a client
* performs right after it opened a /dev/fw* file.
*
firewire: cdev: prevent race between first get_info ioctl and bus reset event queuing Between open(2) of a /dev/fw* and the first FW_CDEV_IOC_GET_INFO ioctl(2) on it, the kernel already queues FW_CDEV_EVENT_BUS_RESET events to be read(2) by the client. The get_info ioctl is practically always issued right away after open, hence this condition only occurs if the client opens during a bus reset, especially during a rapid series of bus resets. The problem with this condition is twofold: - These bus reset events carry the (as yet undocumented) @closure value of 0. But it is not the kernel's place to choose closures; they are privat to the client. E.g., this 0 value forced from the kernel makes it unsafe for clients to dereference it as a pointer to a closure object without NULL pointer check. - It is impossible for clients to determine the relative order of bus reset events from get_info ioctl(2) versus those from read(2), except in one way: By comparison of closure values. Again, such a procedure imposes complexity on clients and reduces freedom in use of the bus reset closure. So, change the ABI to suppress queuing of bus reset events before the first FW_CDEV_IOC_GET_INFO ioctl was issued by the client. Note, this ABI change cannot be version-controlled. The kernel cannot distinguish old from new clients before the first FW_CDEV_IOC_GET_INFO ioctl. We will try to back-merge this change into currently maintained stable/ longterm series, and we only document the new behaviour. The old behavior is now considered a kernel bug, which it basically is. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: <stable@kernel.org>
2011-07-09 22:43:22 +08:00
* As a side effect, reception of %FW_CDEV_EVENT_BUS_RESET events to be read(2)
* is started by this ioctl.
*/
struct fw_cdev_get_info {
__u32 version;
__u32 rom_length;
__u64 rom;
__u64 bus_reset;
__u64 bus_reset_closure;
__u32 card;
};
/**
* struct fw_cdev_send_request - Send an asynchronous request packet
* @tcode: Transaction code of the request
* @length: Length of outgoing payload, in bytes
* @offset: 48-bit offset at destination node
* @closure: Passed back to userspace in the response event
* @data: Userspace pointer to payload
* @generation: The bus generation where packet is valid
*
* Send a request to the device. This ioctl implements all outgoing requests.
* Both quadlet and block request specify the payload as a pointer to the data
* in the @data field. Once the transaction completes, the kernel writes an
* &fw_cdev_event_response event back. The @closure field is passed back to
* user space in the response event.
*/
struct fw_cdev_send_request {
__u32 tcode;
__u32 length;
__u64 offset;
__u64 closure;
__u64 data;
__u32 generation;
};
/**
* struct fw_cdev_send_response - Send an asynchronous response packet
* @rcode: Response code as determined by the userspace handler
* @length: Length of outgoing payload, in bytes
* @data: Userspace pointer to payload
* @handle: The handle from the &fw_cdev_event_request
*
* Send a response to an incoming request. By setting up an address range using
* the %FW_CDEV_IOC_ALLOCATE ioctl, userspace can listen for incoming requests. An
* incoming request will generate an %FW_CDEV_EVENT_REQUEST, and userspace must
* send a reply using this ioctl. The event has a handle to the kernel-side
* pending transaction, which should be used with this ioctl.
*/
struct fw_cdev_send_response {
__u32 rcode;
__u32 length;
__u64 data;
__u32 handle;
};
/**
firewire: cdev: improve FW_CDEV_IOC_ALLOCATE In both the ieee1394 stack and the firewire stack, the core treats kernelspace drivers better than userspace drivers when it comes to CSR address range allocation: The former may request a register to be placed automatically at a free spot anywhere inside a specified address range. The latter may only request a register at a fixed offset. Hence, userspace drivers which do not require a fixed offset potentially need to implement a retry loop with incremented offset in each retry until the kernel does not fail allocation with EBUSY. This awkward procedure is not fundamentally necessary as the core already provides a superior allocation API to kernelspace drivers. Therefore change the ioctl() ABI by addition of a region_end member in the existing struct fw_cdev_allocate. Userspace and kernelspace APIs work the same way now. There is a small cost to pay by clients though: If client source code is required to compile with older kernel headers too, then any use of the new member fw_cdev_allocate.region_end needs to be enclosed by #ifdef/#endif directives. However, any client program that seriously wants to use address range allocations will require a kernel of cdev ABI version >= 4 at runtime and a linux/firewire-cdev.h header of >= 4 anyway. This is because v4 brings FW_CDEV_EVENT_REQUEST2. The only client program in which build-time compatibility with struct fw_cdev_allocate as found in older kernel headers makes sense is libraw1394. (libraw1394 uses the older broken FW_CDEV_EVENT_REQUEST to implement a makeshift, incorrect transaction responder that does at least work somewhat in many simple scenarios, relying on guesswork by libraw1394 and by libraw1394 based applications. Plus, address range allocation and transaction responder is only one of many features that libraw1394 needs to provide, and these other features need to work with kernel and kernel-headers as old as possible. Any new linux/firewire-cdev.h based client that implements a transaction responder should never attempt to do it like libraw1394; instead it should make a header and kernel of v4 or later a hard requirement.) While we are at it, update the struct fw_cdev_allocate documentation to better reflect the recent fw_cdev_event_request2 ABI addition. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-07-23 19:05:39 +08:00
* struct fw_cdev_allocate - Allocate a CSR in an address range
* @offset: Start offset of the address range
* @closure: To be passed back to userspace in request events
firewire: cdev: improve FW_CDEV_IOC_ALLOCATE In both the ieee1394 stack and the firewire stack, the core treats kernelspace drivers better than userspace drivers when it comes to CSR address range allocation: The former may request a register to be placed automatically at a free spot anywhere inside a specified address range. The latter may only request a register at a fixed offset. Hence, userspace drivers which do not require a fixed offset potentially need to implement a retry loop with incremented offset in each retry until the kernel does not fail allocation with EBUSY. This awkward procedure is not fundamentally necessary as the core already provides a superior allocation API to kernelspace drivers. Therefore change the ioctl() ABI by addition of a region_end member in the existing struct fw_cdev_allocate. Userspace and kernelspace APIs work the same way now. There is a small cost to pay by clients though: If client source code is required to compile with older kernel headers too, then any use of the new member fw_cdev_allocate.region_end needs to be enclosed by #ifdef/#endif directives. However, any client program that seriously wants to use address range allocations will require a kernel of cdev ABI version >= 4 at runtime and a linux/firewire-cdev.h header of >= 4 anyway. This is because v4 brings FW_CDEV_EVENT_REQUEST2. The only client program in which build-time compatibility with struct fw_cdev_allocate as found in older kernel headers makes sense is libraw1394. (libraw1394 uses the older broken FW_CDEV_EVENT_REQUEST to implement a makeshift, incorrect transaction responder that does at least work somewhat in many simple scenarios, relying on guesswork by libraw1394 and by libraw1394 based applications. Plus, address range allocation and transaction responder is only one of many features that libraw1394 needs to provide, and these other features need to work with kernel and kernel-headers as old as possible. Any new linux/firewire-cdev.h based client that implements a transaction responder should never attempt to do it like libraw1394; instead it should make a header and kernel of v4 or later a hard requirement.) While we are at it, update the struct fw_cdev_allocate documentation to better reflect the recent fw_cdev_event_request2 ABI addition. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-07-23 19:05:39 +08:00
* @length: Length of the CSR, in bytes
* @handle: Handle to the allocation, written by the kernel
firewire: cdev: improve FW_CDEV_IOC_ALLOCATE In both the ieee1394 stack and the firewire stack, the core treats kernelspace drivers better than userspace drivers when it comes to CSR address range allocation: The former may request a register to be placed automatically at a free spot anywhere inside a specified address range. The latter may only request a register at a fixed offset. Hence, userspace drivers which do not require a fixed offset potentially need to implement a retry loop with incremented offset in each retry until the kernel does not fail allocation with EBUSY. This awkward procedure is not fundamentally necessary as the core already provides a superior allocation API to kernelspace drivers. Therefore change the ioctl() ABI by addition of a region_end member in the existing struct fw_cdev_allocate. Userspace and kernelspace APIs work the same way now. There is a small cost to pay by clients though: If client source code is required to compile with older kernel headers too, then any use of the new member fw_cdev_allocate.region_end needs to be enclosed by #ifdef/#endif directives. However, any client program that seriously wants to use address range allocations will require a kernel of cdev ABI version >= 4 at runtime and a linux/firewire-cdev.h header of >= 4 anyway. This is because v4 brings FW_CDEV_EVENT_REQUEST2. The only client program in which build-time compatibility with struct fw_cdev_allocate as found in older kernel headers makes sense is libraw1394. (libraw1394 uses the older broken FW_CDEV_EVENT_REQUEST to implement a makeshift, incorrect transaction responder that does at least work somewhat in many simple scenarios, relying on guesswork by libraw1394 and by libraw1394 based applications. Plus, address range allocation and transaction responder is only one of many features that libraw1394 needs to provide, and these other features need to work with kernel and kernel-headers as old as possible. Any new linux/firewire-cdev.h based client that implements a transaction responder should never attempt to do it like libraw1394; instead it should make a header and kernel of v4 or later a hard requirement.) While we are at it, update the struct fw_cdev_allocate documentation to better reflect the recent fw_cdev_event_request2 ABI addition. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-07-23 19:05:39 +08:00
* @region_end: First address above the address range (added in ABI v4, 2.6.36)
*
* Allocate an address range in the 48-bit address space on the local node
* (the controller). This allows userspace to listen for requests with an
firewire: cdev: improve FW_CDEV_IOC_ALLOCATE In both the ieee1394 stack and the firewire stack, the core treats kernelspace drivers better than userspace drivers when it comes to CSR address range allocation: The former may request a register to be placed automatically at a free spot anywhere inside a specified address range. The latter may only request a register at a fixed offset. Hence, userspace drivers which do not require a fixed offset potentially need to implement a retry loop with incremented offset in each retry until the kernel does not fail allocation with EBUSY. This awkward procedure is not fundamentally necessary as the core already provides a superior allocation API to kernelspace drivers. Therefore change the ioctl() ABI by addition of a region_end member in the existing struct fw_cdev_allocate. Userspace and kernelspace APIs work the same way now. There is a small cost to pay by clients though: If client source code is required to compile with older kernel headers too, then any use of the new member fw_cdev_allocate.region_end needs to be enclosed by #ifdef/#endif directives. However, any client program that seriously wants to use address range allocations will require a kernel of cdev ABI version >= 4 at runtime and a linux/firewire-cdev.h header of >= 4 anyway. This is because v4 brings FW_CDEV_EVENT_REQUEST2. The only client program in which build-time compatibility with struct fw_cdev_allocate as found in older kernel headers makes sense is libraw1394. (libraw1394 uses the older broken FW_CDEV_EVENT_REQUEST to implement a makeshift, incorrect transaction responder that does at least work somewhat in many simple scenarios, relying on guesswork by libraw1394 and by libraw1394 based applications. Plus, address range allocation and transaction responder is only one of many features that libraw1394 needs to provide, and these other features need to work with kernel and kernel-headers as old as possible. Any new linux/firewire-cdev.h based client that implements a transaction responder should never attempt to do it like libraw1394; instead it should make a header and kernel of v4 or later a hard requirement.) While we are at it, update the struct fw_cdev_allocate documentation to better reflect the recent fw_cdev_event_request2 ABI addition. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-07-23 19:05:39 +08:00
* offset within that address range. Every time when the kernel receives a
* request within the range, an &fw_cdev_event_request2 event will be emitted.
* (If the kernel or the client implements ABI version <= 3, an
* &fw_cdev_event_request will be generated instead.)
*
* The @closure field is passed back to userspace in these request events.
* The @handle field is an out parameter, returning a handle to the allocated
* range to be used for later deallocation of the range.
*
* The address range is allocated on all local nodes. The address allocation
* is exclusive except for the FCP command and response registers. If an
* exclusive address region is already in use, the ioctl fails with errno set
* to %EBUSY.
firewire: cdev: improve FW_CDEV_IOC_ALLOCATE In both the ieee1394 stack and the firewire stack, the core treats kernelspace drivers better than userspace drivers when it comes to CSR address range allocation: The former may request a register to be placed automatically at a free spot anywhere inside a specified address range. The latter may only request a register at a fixed offset. Hence, userspace drivers which do not require a fixed offset potentially need to implement a retry loop with incremented offset in each retry until the kernel does not fail allocation with EBUSY. This awkward procedure is not fundamentally necessary as the core already provides a superior allocation API to kernelspace drivers. Therefore change the ioctl() ABI by addition of a region_end member in the existing struct fw_cdev_allocate. Userspace and kernelspace APIs work the same way now. There is a small cost to pay by clients though: If client source code is required to compile with older kernel headers too, then any use of the new member fw_cdev_allocate.region_end needs to be enclosed by #ifdef/#endif directives. However, any client program that seriously wants to use address range allocations will require a kernel of cdev ABI version >= 4 at runtime and a linux/firewire-cdev.h header of >= 4 anyway. This is because v4 brings FW_CDEV_EVENT_REQUEST2. The only client program in which build-time compatibility with struct fw_cdev_allocate as found in older kernel headers makes sense is libraw1394. (libraw1394 uses the older broken FW_CDEV_EVENT_REQUEST to implement a makeshift, incorrect transaction responder that does at least work somewhat in many simple scenarios, relying on guesswork by libraw1394 and by libraw1394 based applications. Plus, address range allocation and transaction responder is only one of many features that libraw1394 needs to provide, and these other features need to work with kernel and kernel-headers as old as possible. Any new linux/firewire-cdev.h based client that implements a transaction responder should never attempt to do it like libraw1394; instead it should make a header and kernel of v4 or later a hard requirement.) While we are at it, update the struct fw_cdev_allocate documentation to better reflect the recent fw_cdev_event_request2 ABI addition. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-07-23 19:05:39 +08:00
*
* If kernel and client implement ABI version >= 4, the kernel looks up a free
* spot of size @length inside [@offset..@region_end) and, if found, writes
* the start address of the new CSR back in @offset. I.e. @offset is an
* in and out parameter. If this automatic placement of a CSR in a bigger
* address range is not desired, the client simply needs to set @region_end
* = @offset + @length.
*
* If the kernel or the client implements ABI version <= 3, @region_end is
* ignored and effectively assumed to be @offset + @length.
*
* @region_end is only present in a kernel header >= 2.6.36. If necessary,
* this can for example be tested by #ifdef FW_CDEV_EVENT_REQUEST2.
*/
struct fw_cdev_allocate {
__u64 offset;
__u64 closure;
__u32 length;
__u32 handle;
firewire: cdev: improve FW_CDEV_IOC_ALLOCATE In both the ieee1394 stack and the firewire stack, the core treats kernelspace drivers better than userspace drivers when it comes to CSR address range allocation: The former may request a register to be placed automatically at a free spot anywhere inside a specified address range. The latter may only request a register at a fixed offset. Hence, userspace drivers which do not require a fixed offset potentially need to implement a retry loop with incremented offset in each retry until the kernel does not fail allocation with EBUSY. This awkward procedure is not fundamentally necessary as the core already provides a superior allocation API to kernelspace drivers. Therefore change the ioctl() ABI by addition of a region_end member in the existing struct fw_cdev_allocate. Userspace and kernelspace APIs work the same way now. There is a small cost to pay by clients though: If client source code is required to compile with older kernel headers too, then any use of the new member fw_cdev_allocate.region_end needs to be enclosed by #ifdef/#endif directives. However, any client program that seriously wants to use address range allocations will require a kernel of cdev ABI version >= 4 at runtime and a linux/firewire-cdev.h header of >= 4 anyway. This is because v4 brings FW_CDEV_EVENT_REQUEST2. The only client program in which build-time compatibility with struct fw_cdev_allocate as found in older kernel headers makes sense is libraw1394. (libraw1394 uses the older broken FW_CDEV_EVENT_REQUEST to implement a makeshift, incorrect transaction responder that does at least work somewhat in many simple scenarios, relying on guesswork by libraw1394 and by libraw1394 based applications. Plus, address range allocation and transaction responder is only one of many features that libraw1394 needs to provide, and these other features need to work with kernel and kernel-headers as old as possible. Any new linux/firewire-cdev.h based client that implements a transaction responder should never attempt to do it like libraw1394; instead it should make a header and kernel of v4 or later a hard requirement.) While we are at it, update the struct fw_cdev_allocate documentation to better reflect the recent fw_cdev_event_request2 ABI addition. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-07-23 19:05:39 +08:00
__u64 region_end; /* available since kernel version 2.6.36 */
};
/**
* struct fw_cdev_deallocate - Free a CSR address range or isochronous resource
* @handle: Handle to the address range or iso resource, as returned by the
* kernel when the range or resource was allocated
*/
struct fw_cdev_deallocate {
__u32 handle;
};
#define FW_CDEV_LONG_RESET 0
#define FW_CDEV_SHORT_RESET 1
/**
* struct fw_cdev_initiate_bus_reset - Initiate a bus reset
* @type: %FW_CDEV_SHORT_RESET or %FW_CDEV_LONG_RESET
*
* Initiate a bus reset for the bus this device is on. The bus reset can be
* either the original (long) bus reset or the arbitrated (short) bus reset
* introduced in 1394a-2000.
*
* The ioctl returns immediately. A subsequent &fw_cdev_event_bus_reset
* indicates when the reset actually happened. Since ABI v4, this may be
* considerably later than the ioctl because the kernel ensures a grace period
* between subsequent bus resets as per IEEE 1394 bus management specification.
*/
struct fw_cdev_initiate_bus_reset {
__u32 type;
};
/**
* struct fw_cdev_add_descriptor - Add contents to the local node's config ROM
* @immediate: If non-zero, immediate key to insert before pointer
* @key: Upper 8 bits of root directory pointer
* @data: Userspace pointer to contents of descriptor block
* @length: Length of descriptor block data, in quadlets
* @handle: Handle to the descriptor, written by the kernel
*
* Add a descriptor block and optionally a preceding immediate key to the local
* node's Configuration ROM.
*
* The @key field specifies the upper 8 bits of the descriptor root directory
* pointer and the @data and @length fields specify the contents. The @key
* should be of the form 0xXX000000. The offset part of the root directory entry
* will be filled in by the kernel.
*
* If not 0, the @immediate field specifies an immediate key which will be
* inserted before the root directory pointer.
*
* @immediate, @key, and @data array elements are CPU-endian quadlets.
*
* If successful, the kernel adds the descriptor and writes back a @handle to
* the kernel-side object to be used for later removal of the descriptor block
* and immediate key. The kernel will also generate a bus reset to signal the
* change of the Configuration ROM to other nodes.
*
* This ioctl affects the Configuration ROMs of all local nodes.
* The ioctl only succeeds on device files which represent a local node.
*/
struct fw_cdev_add_descriptor {
__u32 immediate;
__u32 key;
__u64 data;
__u32 length;
__u32 handle;
};
/**
* struct fw_cdev_remove_descriptor - Remove contents from the Configuration ROM
* @handle: Handle to the descriptor, as returned by the kernel when the
* descriptor was added
*
* Remove a descriptor block and accompanying immediate key from the local
* nodes' Configuration ROMs. The kernel will also generate a bus reset to
* signal the change of the Configuration ROM to other nodes.
*/
struct fw_cdev_remove_descriptor {
__u32 handle;
};
#define FW_CDEV_ISO_CONTEXT_TRANSMIT 0
#define FW_CDEV_ISO_CONTEXT_RECEIVE 1
#define FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL 2 /* added in 2.6.36 */
/**
* struct fw_cdev_create_iso_context - Create a context for isochronous I/O
* @type: %FW_CDEV_ISO_CONTEXT_TRANSMIT or %FW_CDEV_ISO_CONTEXT_RECEIVE or
* %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL
* @header_size: Header size to strip in single-channel reception
* @channel: Channel to bind to in single-channel reception or transmission
* @speed: Transmission speed
* @closure: To be returned in &fw_cdev_event_iso_interrupt or
* &fw_cdev_event_iso_interrupt_multichannel
* @handle: Handle to context, written back by kernel
*
* Prior to sending or receiving isochronous I/O, a context must be created.
* The context records information about the transmit or receive configuration
* and typically maps to an underlying hardware resource. A context is set up
* for either sending or receiving. It is bound to a specific isochronous
* @channel.
*
* In case of multichannel reception, @header_size and @channel are ignored
* and the channels are selected by %FW_CDEV_IOC_SET_ISO_CHANNELS.
*
* For %FW_CDEV_ISO_CONTEXT_RECEIVE contexts, @header_size must be at least 4
* and must be a multiple of 4. It is ignored in other context types.
*
* @speed is ignored in receive context types.
*
* If a context was successfully created, the kernel writes back a handle to the
* context, which must be passed in for subsequent operations on that context.
*
* Limitations:
* No more than one iso context can be created per fd.
* The total number of contexts that all userspace and kernelspace drivers can
* create on a card at a time is a hardware limit, typically 4 or 8 contexts per
* direction, and of them at most one multichannel receive context.
*/
struct fw_cdev_create_iso_context {
__u32 type;
__u32 header_size;
__u32 channel;
__u32 speed;
__u64 closure;
__u32 handle;
};
/**
* struct fw_cdev_set_iso_channels - Select channels in multichannel reception
* @channels: Bitmask of channels to listen to
* @handle: Handle of the mutichannel receive context
*
* @channels is the bitwise or of 1ULL << n for each channel n to listen to.
*
* The ioctl fails with errno %EBUSY if there is already another receive context
* on a channel in @channels. In that case, the bitmask of all unoccupied
* channels is returned in @channels.
*/
struct fw_cdev_set_iso_channels {
__u64 channels;
__u32 handle;
};
#define FW_CDEV_ISO_PAYLOAD_LENGTH(v) (v)
#define FW_CDEV_ISO_INTERRUPT (1 << 16)
#define FW_CDEV_ISO_SKIP (1 << 17)
#define FW_CDEV_ISO_SYNC (1 << 17)
#define FW_CDEV_ISO_TAG(v) ((v) << 18)
#define FW_CDEV_ISO_SY(v) ((v) << 20)
#define FW_CDEV_ISO_HEADER_LENGTH(v) ((v) << 24)
/**
* struct fw_cdev_iso_packet - Isochronous packet
* @control: Contains the header length (8 uppermost bits),
* the sy field (4 bits), the tag field (2 bits), a sync flag
* or a skip flag (1 bit), an interrupt flag (1 bit), and the
* payload length (16 lowermost bits)
* @header: Header and payload in case of a transmit context.
*
* &struct fw_cdev_iso_packet is used to describe isochronous packet queues.
* Use the FW_CDEV_ISO_ macros to fill in @control.
* The @header array is empty in case of receive contexts.
*
* Context type %FW_CDEV_ISO_CONTEXT_TRANSMIT:
*
* @control.HEADER_LENGTH must be a multiple of 4. It specifies the numbers of
* bytes in @header that will be prepended to the packet's payload. These bytes
* are copied into the kernel and will not be accessed after the ioctl has
* returned.
*
* The @control.SY and TAG fields are copied to the iso packet header. These
* fields are specified by IEEE 1394a and IEC 61883-1.
*
* The @control.SKIP flag specifies that no packet is to be sent in a frame.
* When using this, all other fields except @control.INTERRUPT must be zero.
*
* When a packet with the @control.INTERRUPT flag set has been completed, an
* &fw_cdev_event_iso_interrupt event will be sent.
*
* Context type %FW_CDEV_ISO_CONTEXT_RECEIVE:
*
* @control.HEADER_LENGTH must be a multiple of the context's header_size.
* If the HEADER_LENGTH is larger than the context's header_size, multiple
* packets are queued for this entry.
*
* The @control.SY and TAG fields are ignored.
*
* If the @control.SYNC flag is set, the context drops all packets until a
* packet with a sy field is received which matches &fw_cdev_start_iso.sync.
*
* @control.PAYLOAD_LENGTH defines how many payload bytes can be received for
* one packet (in addition to payload quadlets that have been defined as headers
* and are stripped and returned in the &fw_cdev_event_iso_interrupt structure).
* If more bytes are received, the additional bytes are dropped. If less bytes
* are received, the remaining bytes in this part of the payload buffer will not
* be written to, not even by the next packet. I.e., packets received in
* consecutive frames will not necessarily be consecutive in memory. If an
* entry has queued multiple packets, the PAYLOAD_LENGTH is divided equally
* among them.
*
* When a packet with the @control.INTERRUPT flag set has been completed, an
* &fw_cdev_event_iso_interrupt event will be sent. An entry that has queued
* multiple receive packets is completed when its last packet is completed.
*
* Context type %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL:
*
* Here, &fw_cdev_iso_packet would be more aptly named _iso_buffer_chunk since
* it specifies a chunk of the mmap()'ed buffer, while the number and alignment
* of packets to be placed into the buffer chunk is not known beforehand.
*
* @control.PAYLOAD_LENGTH is the size of the buffer chunk and specifies room
* for header, payload, padding, and trailer bytes of one or more packets.
* It must be a multiple of 4.
*
* @control.HEADER_LENGTH, TAG and SY are ignored. SYNC is treated as described
* for single-channel reception.
*
* When a buffer chunk with the @control.INTERRUPT flag set has been filled
* entirely, an &fw_cdev_event_iso_interrupt_mc event will be sent.
*/
struct fw_cdev_iso_packet {
__u32 control;
__u32 header[0];
};
/**
* struct fw_cdev_queue_iso - Queue isochronous packets for I/O
* @packets: Userspace pointer to an array of &fw_cdev_iso_packet
* @data: Pointer into mmap()'ed payload buffer
* @size: Size of the @packets array, in bytes
* @handle: Isochronous context handle
*
* Queue a number of isochronous packets for reception or transmission.
* This ioctl takes a pointer to an array of &fw_cdev_iso_packet structs,
* which describe how to transmit from or receive into a contiguous region
* of a mmap()'ed payload buffer. As part of transmit packet descriptors,
* a series of headers can be supplied, which will be prepended to the
* payload during DMA.
*
* The kernel may or may not queue all packets, but will write back updated
* values of the @packets, @data and @size fields, so the ioctl can be
* resubmitted easily.
*
* In case of a multichannel receive context, @data must be quadlet-aligned
* relative to the buffer start.
*/
struct fw_cdev_queue_iso {
__u64 packets;
__u64 data;
__u32 size;
__u32 handle;
};
#define FW_CDEV_ISO_CONTEXT_MATCH_TAG0 1
#define FW_CDEV_ISO_CONTEXT_MATCH_TAG1 2
#define FW_CDEV_ISO_CONTEXT_MATCH_TAG2 4
#define FW_CDEV_ISO_CONTEXT_MATCH_TAG3 8
#define FW_CDEV_ISO_CONTEXT_MATCH_ALL_TAGS 15
/**
* struct fw_cdev_start_iso - Start an isochronous transmission or reception
* @cycle: Cycle in which to start I/O. If @cycle is greater than or
* equal to 0, the I/O will start on that cycle.
* @sync: Determines the value to wait for for receive packets that have
* the %FW_CDEV_ISO_SYNC bit set
* @tags: Tag filter bit mask. Only valid for isochronous reception.
* Determines the tag values for which packets will be accepted.
* Use FW_CDEV_ISO_CONTEXT_MATCH_ macros to set @tags.
* @handle: Isochronous context handle within which to transmit or receive
*/
struct fw_cdev_start_iso {
__s32 cycle;
__u32 sync;
__u32 tags;
__u32 handle;
};
/**
* struct fw_cdev_stop_iso - Stop an isochronous transmission or reception
* @handle: Handle of isochronous context to stop
*/
struct fw_cdev_stop_iso {
__u32 handle;
};
/**
* struct fw_cdev_flush_iso - flush completed iso packets
* @handle: handle of isochronous context to flush
*
* For %FW_CDEV_ISO_CONTEXT_TRANSMIT or %FW_CDEV_ISO_CONTEXT_RECEIVE contexts,
* report any completed packets.
*
* For %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL contexts, report the current
* offset in the receive buffer, if it has changed; this is typically in the
* middle of some buffer chunk.
*
* Any %FW_CDEV_EVENT_ISO_INTERRUPT or %FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL
* events generated by this ioctl are sent synchronously, i.e., are available
* for reading from the file descriptor when this ioctl returns.
*/
struct fw_cdev_flush_iso {
__u32 handle;
};
/**
* struct fw_cdev_get_cycle_timer - read cycle timer register
* @local_time: system time, in microseconds since the Epoch
* @cycle_timer: Cycle Time register contents
*
* Same as %FW_CDEV_IOC_GET_CYCLE_TIMER2, but fixed to use %CLOCK_REALTIME
* and only with microseconds resolution.
*
* In version 1 and 2 of the ABI, this ioctl returned unreliable (non-
* monotonic) @cycle_timer values on certain controllers.
*/
struct fw_cdev_get_cycle_timer {
__u64 local_time;
__u32 cycle_timer;
};
/**
* struct fw_cdev_get_cycle_timer2 - read cycle timer register
* @tv_sec: system time, seconds
* @tv_nsec: system time, sub-seconds part in nanoseconds
* @clk_id: input parameter, clock from which to get the system time
* @cycle_timer: Cycle Time register contents
*
* The %FW_CDEV_IOC_GET_CYCLE_TIMER2 ioctl reads the isochronous cycle timer
* and also the system clock. This allows to correlate reception time of
* isochronous packets with system time.
*
* @clk_id lets you choose a clock like with POSIX' clock_gettime function.
* Supported @clk_id values are POSIX' %CLOCK_REALTIME and %CLOCK_MONOTONIC
* and Linux' %CLOCK_MONOTONIC_RAW.
*
* @cycle_timer consists of 7 bits cycleSeconds, 13 bits cycleCount, and
* 12 bits cycleOffset, in host byte order. Cf. the Cycle Time register
* per IEEE 1394 or Isochronous Cycle Timer register per OHCI-1394.
*/
struct fw_cdev_get_cycle_timer2 {
__s64 tv_sec;
__s32 tv_nsec;
__s32 clk_id;
__u32 cycle_timer;
};
/**
* struct fw_cdev_allocate_iso_resource - (De)allocate a channel or bandwidth
* @closure: Passed back to userspace in corresponding iso resource events
* @channels: Isochronous channels of which one is to be (de)allocated
* @bandwidth: Isochronous bandwidth units to be (de)allocated
* @handle: Handle to the allocation, written by the kernel (only valid in
* case of %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE ioctls)
*
* The %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE ioctl initiates allocation of an
* isochronous channel and/or of isochronous bandwidth at the isochronous
* resource manager (IRM). Only one of the channels specified in @channels is
* allocated. An %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED is sent after
* communication with the IRM, indicating success or failure in the event data.
* The kernel will automatically reallocate the resources after bus resets.
* Should a reallocation fail, an %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event
* will be sent. The kernel will also automatically deallocate the resources
* when the file descriptor is closed.
*
* The %FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE ioctl can be used to initiate
* deallocation of resources which were allocated as described above.
* An %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event concludes this operation.
*
* The %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE ioctl is a variant of allocation
* without automatic re- or deallocation.
* An %FW_CDEV_EVENT_ISO_RESOURCE_ALLOCATED event concludes this operation,
* indicating success or failure in its data.
*
* The %FW_CDEV_IOC_DEALLOCATE_ISO_RESOURCE_ONCE ioctl works like
* %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE except that resources are freed
* instead of allocated.
* An %FW_CDEV_EVENT_ISO_RESOURCE_DEALLOCATED event concludes this operation.
*
* To summarize, %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE allocates iso resources
* for the lifetime of the fd or @handle.
* In contrast, %FW_CDEV_IOC_ALLOCATE_ISO_RESOURCE_ONCE allocates iso resources
* for the duration of a bus generation.
*
* @channels is a host-endian bitfield with the least significant bit
* representing channel 0 and the most significant bit representing channel 63:
* 1ULL << c for each channel c that is a candidate for (de)allocation.
*
* @bandwidth is expressed in bandwidth allocation units, i.e. the time to send
* one quadlet of data (payload or header data) at speed S1600.
*/
struct fw_cdev_allocate_iso_resource {
__u64 closure;
__u64 channels;
__u32 bandwidth;
__u32 handle;
};
/**
* struct fw_cdev_send_stream_packet - send an asynchronous stream packet
* @length: Length of outgoing payload, in bytes
* @tag: Data format tag
* @channel: Isochronous channel to transmit to
* @sy: Synchronization code
* @closure: Passed back to userspace in the response event
* @data: Userspace pointer to payload
* @generation: The bus generation where packet is valid
* @speed: Speed to transmit at
*
* The %FW_CDEV_IOC_SEND_STREAM_PACKET ioctl sends an asynchronous stream packet
* to every device which is listening to the specified channel. The kernel
* writes an &fw_cdev_event_response event which indicates success or failure of
* the transmission.
*/
struct fw_cdev_send_stream_packet {
__u32 length;
__u32 tag;
__u32 channel;
__u32 sy;
__u64 closure;
__u64 data;
__u32 generation;
__u32 speed;
};
firewire: cdev: add PHY packet transmission Add an FW_CDEV_IOC_SEND_PHY_PACKET ioctl() for /dev/fw* which can be used to implement bus management related functionality in userspace. This is also half of the functionality (the transmit part) that is needed to support a userspace implementation of a VersaPHY transaction layer. Safety considerations: - PHY packets are generally broadcasts and may have interesting effects on PHYs and the bus, e.g. make asynchronous arbitration impossible due to too low gap count. Hence some kind of elevated privileges should be required of a process to be able to send PHY packets. This implementation assumes that a process that is allowed to open the /dev/fw* of a local node does have this privilege. There was an inconclusive discussion about introducing POSIX capabilities as a means to check for user privileges for these kinds of operations. - The kernel does not check integrity of the supplied packet data. That would be far too much code, considering the many kinds of PHY packets. A process which got the privilege to send these packets is trusted to do it correctly. Just like with the other "send packet" ioctls, a non-blocking API is chosen; i.e. the ioctl may return even before AT DMA started. After transmission, an event for poll()/read() is enqueued. Most users are going to need a blocking API, but a blocking userspace wrapper is easy to implement, and the second of the two existing libraw1394 calls raw1394_phy_packet_write() and raw1394_start_phy_packet_write() can be better supported that way. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2010-07-17 04:25:14 +08:00
/**
* struct fw_cdev_send_phy_packet - send a PHY packet
* @closure: Passed back to userspace in the PHY-packet-sent event
* @data: First and second quadlet of the PHY packet
* @generation: The bus generation where packet is valid
*
* The %FW_CDEV_IOC_SEND_PHY_PACKET ioctl sends a PHY packet to all nodes
* on the same card as this device. After transmission, an
* %FW_CDEV_EVENT_PHY_PACKET_SENT event is generated.
*
* The payload @data[] shall be specified in host byte order. Usually,
* @data[1] needs to be the bitwise inverse of @data[0]. VersaPHY packets
* are an exception to this rule.
*
* The ioctl is only permitted on device files which represent a local node.
*/
struct fw_cdev_send_phy_packet {
__u64 closure;
__u32 data[2];
__u32 generation;
};
/**
* struct fw_cdev_receive_phy_packets - start reception of PHY packets
* @closure: Passed back to userspace in phy packet events
*
* This ioctl activates issuing of %FW_CDEV_EVENT_PHY_PACKET_RECEIVED due to
* incoming PHY packets from any node on the same bus as the device.
*
* The ioctl is only permitted on device files which represent a local node.
*/
struct fw_cdev_receive_phy_packets {
__u64 closure;
};
#define FW_CDEV_VERSION 3 /* Meaningless legacy macro; don't use it. */
#endif /* _LINUX_FIREWIRE_CDEV_H */