hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
linux-sg2042/arch/arm/mach-shmobile/Kconfig

203 lines
4.3 KiB
Plaintext
Raw Normal View History

ARM: mach-shmobile: SH-Mobile G3 support. This adds preliminary support for the SH-Mobile G-series. The SH-Mobile G-series is a series of ARM/SH multi-core CPUs that aside from the ARM MPU are primarily composed of existing SH IP blocks. This includes initial support for the SH7367 (SH-Mobile G3) CPU and the G3EVM reference board. Only timer, serial console, and NOR flash are supported at this point. Patches for the interrupt controller, pinmux support, clock framework and runtime pm will be submitted as feature patches on top of this. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-05 19:14:49 +08:00
if ARCH_SHMOBILE
comment "SH-Mobile System Type"
config ARCH_SH7367
bool "SH-Mobile G3 (SH7367)"
select CPU_V6
ARM: mach-shmobile: sh7367 clock framework V2 This patch is V2 of clock framework tables/code for sh7367. MSTP support is included for the following hardware blocks: KEYSC, SCIF, IIC, IRDA, FLCTL, VOU, SIU, USB, SDHI and UIO. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-20 22:49:28 +08:00
select SH_CLK_CPG
ARM: mach-shmobile: Tidy up the Kconfig bits. Presently each one of the CPUs manually selects the same feature set, and there's a reasonable expectation that none of these will change for future CPUs in the SH-Mobile / R-Mobile family, so we move those over to the top-level ARCH_SHMOBILE. While we're at it, all of the CPUs support optional GPIOs via the PFC, do not have I/O ports, and expect sparse IRQ, so we bring the configuration in line across the board. This more or less brings the ARM-based parts in sync with their SH counterparts. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-16 15:10:20 +08:00
select ARCH_WANT_OPTIONAL_GPIOLIB
ARM: mach-shmobile: SH-Mobile G3 support. This adds preliminary support for the SH-Mobile G-series. The SH-Mobile G-series is a series of ARM/SH multi-core CPUs that aside from the ARM MPU are primarily composed of existing SH IP blocks. This includes initial support for the SH7367 (SH-Mobile G3) CPU and the G3EVM reference board. Only timer, serial console, and NOR flash are supported at this point. Patches for the interrupt controller, pinmux support, clock framework and runtime pm will be submitted as feature patches on top of this. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-05 19:14:49 +08:00
ARM: mach-shmobile: SH-Mobile G4 support. This adds preliminary support for the SH7377 (SH-Mobile G4) CPU and the G4EVM reference board. Only timer, serial console and NOR flash are supported at this point. Support for the interrupt controller, pinmux support, clock framework and runtime pm will be submitted as feature patches on top of this. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-05 19:15:07 +08:00
config ARCH_SH7377
bool "SH-Mobile G4 (SH7377)"
select CPU_V7
ARM: mach-shmobile: sh7377 clock framework V2 This patch is V2 of clock framework tables/code for sh7377. MSTP support is included for the following hardware blocks: KEYSC, SCIF, IIC, IRDA, FLCTL, USB, SDHI and UIO. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-21 13:19:34 +08:00
select SH_CLK_CPG
ARM: mach-shmobile: Tidy up the Kconfig bits. Presently each one of the CPUs manually selects the same feature set, and there's a reasonable expectation that none of these will change for future CPUs in the SH-Mobile / R-Mobile family, so we move those over to the top-level ARCH_SHMOBILE. While we're at it, all of the CPUs support optional GPIOs via the PFC, do not have I/O ports, and expect sparse IRQ, so we bring the configuration in line across the board. This more or less brings the ARM-based parts in sync with their SH counterparts. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-16 15:10:20 +08:00
select ARCH_WANT_OPTIONAL_GPIOLIB
ARM: mach-shmobile: SH-Mobile G4 support. This adds preliminary support for the SH7377 (SH-Mobile G4) CPU and the G4EVM reference board. Only timer, serial console and NOR flash are supported at this point. Support for the interrupt controller, pinmux support, clock framework and runtime pm will be submitted as feature patches on top of this. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-05 19:15:07 +08:00
ARM: mach-shmobile: SH-Mobile AP4 support. This adds preliminary support for the SH7372 (SH-Mobile AP4) CPU and the AP4EVB reference board. Only timer, serial console and NOR flash are supported at this point. Support for the interrupt controller, pinmux support, clock framework and runtime pm will be submitted as feature patches on top of this. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-05 19:14:58 +08:00
config ARCH_SH7372
bool "SH-Mobile AP4 (SH7372)"
select CPU_V7
ARM: mach-shmobile: sh7372 clock framework support V2 This patch is V2 of clock framework tables/code for sh7372. MSTP are included for KEYSC, SCIF, IIC, USB, SDHI and UIO. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-12 22:21:34 +08:00
select SH_CLK_CPG
ARM: mach-shmobile: Tidy up the Kconfig bits. Presently each one of the CPUs manually selects the same feature set, and there's a reasonable expectation that none of these will change for future CPUs in the SH-Mobile / R-Mobile family, so we move those over to the top-level ARCH_SHMOBILE. While we're at it, all of the CPUs support optional GPIOs via the PFC, do not have I/O ports, and expect sparse IRQ, so we bring the configuration in line across the board. This more or less brings the ARM-based parts in sync with their SH counterparts. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-16 15:10:20 +08:00
select ARCH_WANT_OPTIONAL_GPIOLIB
ARM: mach-shmobile: SH-Mobile AP4 support. This adds preliminary support for the SH7372 (SH-Mobile AP4) CPU and the AP4EVB reference board. Only timer, serial console and NOR flash are supported at this point. Support for the interrupt controller, pinmux support, clock framework and runtime pm will be submitted as feature patches on top of this. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-05 19:14:58 +08:00
ARM: mach-shmobile: Initial AG5 and AG5EVM support This patch adds initial support for Renesas SH-Mobile AG5. At this point the AG5 CPU support is limited to the ARM core, SCIF serial and a CMT timer together with L2 cache and the GIC. The AG5EVM board also supports Ethernet. Future patches will add support for GPIO, INTCS, CPGA and platform data / driver updates for devices such as IIC, LCDC, FSI, KEYSC, CEU and SDHI among others. The code in entry-macro.S will be cleaned up when the ARM IRQ demux code improvements have been merged. Depends on the AG5EVM mach-type recently registered but not yet present in arch/arm/tools/mach-types. As the AG5EVM board comes with 512MiB memory it is recommended to turn on HIGHMEM. Many thanks to Yoshii-san for initial bring up. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-17 18:59:31 +08:00
config ARCH_SH73A0
bool "SH-Mobile AG5 (R8A73A00)"
select CPU_V7
select SH_CLK_CPG
ARM: mach-shmobile: Add sh73a0 pinmux support PFC definitions for sh73a0 to support GPIO and pinmux handling. Signed-off-by: Takashi YOSHII <takashi.yoshii.zj@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-19 15:47:16 +08:00
select ARCH_WANT_OPTIONAL_GPIOLIB
ARM: mach-shmobile: Initial AG5 and AG5EVM support This patch adds initial support for Renesas SH-Mobile AG5. At this point the AG5 CPU support is limited to the ARM core, SCIF serial and a CMT timer together with L2 cache and the GIC. The AG5EVM board also supports Ethernet. Future patches will add support for GPIO, INTCS, CPGA and platform data / driver updates for devices such as IIC, LCDC, FSI, KEYSC, CEU and SDHI among others. The code in entry-macro.S will be cleaned up when the ARM IRQ demux code improvements have been merged. Depends on the AG5EVM mach-type recently registered but not yet present in arch/arm/tools/mach-types. As the AG5EVM board comes with 512MiB memory it is recommended to turn on HIGHMEM. Many thanks to Yoshii-san for initial bring up. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-17 18:59:31 +08:00
select ARM_GIC
ARM: mach-shmobile: ag5evm needs CONFIG_I2C ag5evm implements a backlight control, using an I2C controller, therefore it needs CONFIG_I2C to fix this make failure arch/arm/mach-shmobile/built-in.o: In function `lcd_on': pfc-sh73a0.c:(.text+0x2334): undefined reference to `i2c_get_adapter' pfc-sh73a0.c:(.text+0x2370): undefined reference to `i2c_transfer' (ignore pfc-sh73a0.c) and to build successfully. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-08-31 00:19:13 +08:00
select I2C
ARM: mach-shmobile: Initial AG5 and AG5EVM support This patch adds initial support for Renesas SH-Mobile AG5. At this point the AG5 CPU support is limited to the ARM core, SCIF serial and a CMT timer together with L2 cache and the GIC. The AG5EVM board also supports Ethernet. Future patches will add support for GPIO, INTCS, CPGA and platform data / driver updates for devices such as IIC, LCDC, FSI, KEYSC, CEU and SDHI among others. The code in entry-macro.S will be cleaned up when the ARM IRQ demux code improvements have been merged. Depends on the AG5EVM mach-type recently registered but not yet present in arch/arm/tools/mach-types. As the AG5EVM board comes with 512MiB memory it is recommended to turn on HIGHMEM. Many thanks to Yoshii-san for initial bring up. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-17 18:59:31 +08:00
ARM: mach-shmobile: R-Mobile A1 support. This adds preliminary support for the R8A7740 (R-Mobile A1) CPU Timer, serial, gic, clock are supported at this point. This patch is based on v0.1 manual Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-11 10:45:52 +08:00
config ARCH_R8A7740
bool "R-Mobile A1 (R8A77400)"
select CPU_V7
select SH_CLK_CPG
select ARCH_WANT_OPTIONAL_GPIOLIB
ARM: mach-shmobile: r8a7779 and Marzen base support V2 Initial support for the r8a7779 SoC and the Marzen board (V2). Only SCIF ports and the TMU are supported at this point. To keep things simple only entity-mapped virt-to-phys mappings are supported. This forces drivers and other SoC glue code to make use of ioremap(). We cannot support early serial console due to virtual address space collisions with the ARM kernel. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-12-14 00:36:12 +08:00
config ARCH_R8A7779
bool "R-Car H1 (R8A77790)"
select CPU_V7
select SH_CLK_CPG
select ARM_GIC
ARM: mach-shmobile: r8a7779 PFC GPIO-only support V2 Add GPIO-only r8a7779 PFC support V2. Only regular GPIOs are supported at this time. GPIO_FN are not supported because they require variable bit width support in be the shared pfc code. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-12-14 00:36:22 +08:00
select ARCH_WANT_OPTIONAL_GPIOLIB
ARM: mach-shmobile: r8a7779 and Marzen base support V2 Initial support for the r8a7779 SoC and the Marzen board (V2). Only SCIF ports and the TMU are supported at this point. To keep things simple only entity-mapped virt-to-phys mappings are supported. This forces drivers and other SoC glue code to make use of ioremap(). We cannot support early serial console due to virtual address space collisions with the ARM kernel. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-12-14 00:36:12 +08:00
mach-shmobile: Emma Mobile EV2 SoC base support V3 This is V3 of the Emma Mobile EV2 SoC support. Included here is support for serial and timer devices which is just about enough to boot a kernel. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-16 14:44:58 +08:00
config ARCH_EMEV2
bool "Emma Mobile EV2"
select CPU_V7
select ARM_GIC
mach-shmobile: Emma Mobile EV2 GPIO support V3 Tie in the Emma Mobile GPIO driver "em-gio" to support the GPIOs on Emma Mobile EV2. A static IRQ range is used to allow boards to hook up their platform devices to the GPIOs. DT support is still on the TODO for the GPIO driver, so only platform device support is included here. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-16 14:45:34 +08:00
select ARCH_WANT_OPTIONAL_GPIOLIB
mach-shmobile: Emma Mobile EV2 SoC base support V3 This is V3 of the Emma Mobile EV2 SoC support. Included here is support for serial and timer devices which is just about enough to boot a kernel. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-16 14:44:58 +08:00
ARM: mach-shmobile: SH-Mobile G3 support. This adds preliminary support for the SH-Mobile G-series. The SH-Mobile G-series is a series of ARM/SH multi-core CPUs that aside from the ARM MPU are primarily composed of existing SH IP blocks. This includes initial support for the SH7367 (SH-Mobile G3) CPU and the G3EVM reference board. Only timer, serial console, and NOR flash are supported at this point. Patches for the interrupt controller, pinmux support, clock framework and runtime pm will be submitted as feature patches on top of this. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-05 19:14:49 +08:00
comment "SH-Mobile Board Type"
config MACH_G3EVM
bool "G3EVM board"
depends on ARCH_SH7367
ARM: mach-shmobile: sh7367 and G3EVM pinmux support Add support for the sh7367 pinmux using drivers/sh/pfc.c and select serial console pins and some LEDs on G3EVM. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-10 19:10:55 +08:00
select ARCH_REQUIRE_GPIOLIB
ARM: mach-shmobile: SH-Mobile G3 support. This adds preliminary support for the SH-Mobile G-series. The SH-Mobile G-series is a series of ARM/SH multi-core CPUs that aside from the ARM MPU are primarily composed of existing SH IP blocks. This includes initial support for the SH7367 (SH-Mobile G3) CPU and the G3EVM reference board. Only timer, serial console, and NOR flash are supported at this point. Patches for the interrupt controller, pinmux support, clock framework and runtime pm will be submitted as feature patches on top of this. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-05 19:14:49 +08:00
ARM: mach-shmobile: SH-Mobile G4 support. This adds preliminary support for the SH7377 (SH-Mobile G4) CPU and the G4EVM reference board. Only timer, serial console and NOR flash are supported at this point. Support for the interrupt controller, pinmux support, clock framework and runtime pm will be submitted as feature patches on top of this. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-05 19:15:07 +08:00
config MACH_G4EVM
bool "G4EVM board"
depends on ARCH_SH7377
ARM: mach-shmobile: sh7377 and G4EVM pinmux support Add support for the sh 7377 pinmux using drivers/sh/pfc.c and some LEDs on G4EVM. Signed-off-by: NISHIMOTO Hiroki <nishimoto.hiroki@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-12 16:10:06 +08:00
select ARCH_REQUIRE_GPIOLIB
ARM: mach-shmobile: SH-Mobile G4 support. This adds preliminary support for the SH7377 (SH-Mobile G4) CPU and the G4EVM reference board. Only timer, serial console and NOR flash are supported at this point. Support for the interrupt controller, pinmux support, clock framework and runtime pm will be submitted as feature patches on top of this. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-05 19:15:07 +08:00
ARM: mach-shmobile: SH-Mobile AP4 support. This adds preliminary support for the SH7372 (SH-Mobile AP4) CPU and the AP4EVB reference board. Only timer, serial console and NOR flash are supported at this point. Support for the interrupt controller, pinmux support, clock framework and runtime pm will be submitted as feature patches on top of this. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-05 19:14:58 +08:00
config MACH_AP4EVB
bool "AP4EVB board"
depends on ARCH_SH7372
ARM: mach-shmobile: Add sh7372 pinmux support Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-17 17:39:10 +08:00
select ARCH_REQUIRE_GPIOLIB
ARM: mach-shmobile: add framebuffer support for ap4evb ap4evb uses an LCD, connected to the SoC over the MIPI bus. This patch adds platform data to configure this display and a static clock activation. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Tested-by: Damian Hobson-Garcia <dhobsong@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-23 22:04:03 +08:00
select SH_LCD_MIPI_DSI
ASoC: sh: fsi: use simple-card instead of fsi-ak4642 This patch uses simple-card driver instead of fsi-ak4642 on each board. To select AK4642 driver, each boards select it on Kconfig. This patch removes fsi-ak4642 driver which is no longer needed Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-09 12:18:28 +08:00
select SND_SOC_AK4642 if SND_SIMPLE_CARD
ARM: mach-shmobile: SH-Mobile AP4 support. This adds preliminary support for the SH7372 (SH-Mobile AP4) CPU and the AP4EVB reference board. Only timer, serial console and NOR flash are supported at this point. Support for the interrupt controller, pinmux support, clock framework and runtime pm will be submitted as feature patches on top of this. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-05 19:14:58 +08:00
ARM: mach-shmobile: ap4evb: Add LCD panel selection On AP4EVB board, it is possible to select LCD panel type which are parallel or MIPI by SW3, SW43 dip-switch. This patch add parallel LCD settings and select menu to Kconfig. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-06-04 11:15:09 +08:00
choice
prompt "AP4EVB LCD panel selection"
default AP4EVB_QHD
depends on MACH_AP4EVB
config AP4EVB_QHD
bool "MIPI-DSI QHD (960x540)"
config AP4EVB_WVGA
bool "Parallel WVGA (800x480)"
endchoice
ARM: mach-shmobile: Initial AG5 and AG5EVM support This patch adds initial support for Renesas SH-Mobile AG5. At this point the AG5 CPU support is limited to the ARM core, SCIF serial and a CMT timer together with L2 cache and the GIC. The AG5EVM board also supports Ethernet. Future patches will add support for GPIO, INTCS, CPGA and platform data / driver updates for devices such as IIC, LCDC, FSI, KEYSC, CEU and SDHI among others. The code in entry-macro.S will be cleaned up when the ARM IRQ demux code improvements have been merged. Depends on the AG5EVM mach-type recently registered but not yet present in arch/arm/tools/mach-types. As the AG5EVM board comes with 512MiB memory it is recommended to turn on HIGHMEM. Many thanks to Yoshii-san for initial bring up. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-17 18:59:31 +08:00
config MACH_AG5EVM
bool "AG5EVM board"
ARM: mach-shmobile: ag5evm requires GPIOLIB Because ag5evm board setup code uses gpio functions, ARCH_REQUIRE_GPIOLIB should be set in Kconfig. Otherwise, the first build with defconfig fails. Signed-off-by: Takashi YOSHII <takashi.yoshii.zj@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-13 20:58:56 +08:00
select ARCH_REQUIRE_GPIOLIB
ARM: mach-shmobile: AG5EVM LCDC / MIPI-DSI platform data Add platform data for MIPI-DSI and LCDC on the AG5EVM board. The sh73a0 clkdev bindings are also updated. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-20 16:41:03 +08:00
select SH_LCD_MIPI_DSI
ARM: mach-shmobile: Initial AG5 and AG5EVM support This patch adds initial support for Renesas SH-Mobile AG5. At this point the AG5 CPU support is limited to the ARM core, SCIF serial and a CMT timer together with L2 cache and the GIC. The AG5EVM board also supports Ethernet. Future patches will add support for GPIO, INTCS, CPGA and platform data / driver updates for devices such as IIC, LCDC, FSI, KEYSC, CEU and SDHI among others. The code in entry-macro.S will be cleaned up when the ARM IRQ demux code improvements have been merged. Depends on the AG5EVM mach-type recently registered but not yet present in arch/arm/tools/mach-types. As the AG5EVM board comes with 512MiB memory it is recommended to turn on HIGHMEM. Many thanks to Yoshii-san for initial bring up. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-17 18:59:31 +08:00
depends on ARCH_SH73A0
Merge branch 'rmobile/mackerel' into rmobile-latest Conflicts: arch/arm/mach-shmobile/Kconfig arch/arm/mach-shmobile/Makefile Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-30 13:53:45 +08:00
ARM: mach-shmobile: Add mackerel board support Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-29 10:21:21 +08:00
config MACH_MACKEREL
bool "mackerel board"
depends on ARCH_SH7372
ARM: mach-shmobile: ag5evm: use gpio. Ag5evm board now uses gpio api to initialize pins and peripherals. Signed-off-by: Takashi YOSHII <takashi.yoshii.zj@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-19 15:49:38 +08:00
select ARCH_REQUIRE_GPIOLIB
ASoC: sh: fsi: use simple-card instead of fsi-ak4642 This patch uses simple-card driver instead of fsi-ak4642 on each board. To select AK4642 driver, each boards select it on Kconfig. This patch removes fsi-ak4642 driver which is no longer needed Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-04-09 12:18:28 +08:00
select SND_SOC_AK4642 if SND_SIMPLE_CARD
ARM: mach-shmobile: Initial AG5 and AG5EVM support This patch adds initial support for Renesas SH-Mobile AG5. At this point the AG5 CPU support is limited to the ARM core, SCIF serial and a CMT timer together with L2 cache and the GIC. The AG5EVM board also supports Ethernet. Future patches will add support for GPIO, INTCS, CPGA and platform data / driver updates for devices such as IIC, LCDC, FSI, KEYSC, CEU and SDHI among others. The code in entry-macro.S will be cleaned up when the ARM IRQ demux code improvements have been merged. Depends on the AG5EVM mach-type recently registered but not yet present in arch/arm/tools/mach-types. As the AG5EVM board comes with 512MiB memory it is recommended to turn on HIGHMEM. Many thanks to Yoshii-san for initial bring up. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-17 18:59:31 +08:00
ARM: mach-shmobile: Kota2 SCIFA2 and SMSC911X support Kota2 base board support including the on-chip SCIFA2 serial console and the on-board SMSC911X ethernet port. The s73a0 SMP bits are also updated to include Kota2. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-08-18 13:44:07 +08:00
config MACH_KOTA2
bool "KOTA2 board"
select ARCH_REQUIRE_GPIOLIB
depends on ARCH_SH73A0
ARM: mach-shmobile: add bonito board support. This adds basic bonito board (R-Mobile A1) support Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-11 10:46:45 +08:00
config MACH_BONITO
bool "bonito board"
select ARCH_REQUIRE_GPIOLIB
depends on ARCH_R8A7740
ARM: mach-shmobile: add armadillo800eva board support. This adds very basic armadillo800eva board (R-Mobile A1) support Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-04-06 16:28:59 +08:00
config MACH_ARMADILLO800EVA
bool "Armadillo-800 EVA board"
depends on ARCH_R8A7740
select ARCH_REQUIRE_GPIOLIB
ARM: mach-shmobile: Use DT_MACHINE for armadillo 800 eva Use DT_MACHINE_START() on the r8a7740 based armadillo 800 eva board. Also include a tiny DTS file to describe the board and update the Kconfig dependencies to select CONFIG_USE_OF. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-14 18:54:41 +08:00
select USE_OF
ARM: mach-shmobile: add armadillo800eva board support. This adds very basic armadillo800eva board (R-Mobile A1) support Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-04-06 16:28:59 +08:00
ARM: mach-shmobile: r8a7779 and Marzen base support V2 Initial support for the r8a7779 SoC and the Marzen board (V2). Only SCIF ports and the TMU are supported at this point. To keep things simple only entity-mapped virt-to-phys mappings are supported. This forces drivers and other SoC glue code to make use of ioremap(). We cannot support early serial console due to virtual address space collisions with the ARM kernel. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-12-14 00:36:12 +08:00
config MACH_MARZEN
bool "MARZEN board"
depends on ARCH_R8A7779
ARM: mach-shmobile: r8a7779 PFC GPIO-only support V2 Add GPIO-only r8a7779 PFC support V2. Only regular GPIOs are supported at this time. GPIO_FN are not supported because they require variable bit width support in be the shared pfc code. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-12-14 00:36:22 +08:00
select ARCH_REQUIRE_GPIOLIB
ARM: mach-shmobile: r8a7779 and Marzen base support V2 Initial support for the r8a7779 SoC and the Marzen board (V2). Only SCIF ports and the TMU are supported at this point. To keep things simple only entity-mapped virt-to-phys mappings are supported. This forces drivers and other SoC glue code to make use of ioremap(). We cannot support early serial console due to virtual address space collisions with the ARM kernel. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-12-14 00:36:12 +08:00
mach-shmobile: KZM9D board support V3 V3 of basic KZM9D board support. At this point a quite thin layer that makes use of the Emma Mobile EV2 SoC code. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-16 14:45:16 +08:00
config MACH_KZM9D
bool "KZM9D board"
depends on ARCH_EMEV2
mach-shmobile: Use DT_MACHINE for KZM9D V3 Use DT_MACHINE_START() on the emev2 based KZM9D board. Also include a tiny DTS file to describe the board and update the Kconfig dependencies to select CONFIG_USE_OF. Update the SMP glue code to use OF for matching. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-16 14:46:03 +08:00
select USE_OF
mach-shmobile: KZM9D board support V3 V3 of basic KZM9D board support. At this point a quite thin layer that makes use of the Emma Mobile EV2 SoC code. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-16 14:45:16 +08:00
ARM: mach-shmobile: add KZM-A9-GT board support This adds very basic KZM-A9-GT board (SH73a0) support Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-04-11 11:57:31 +08:00
config MACH_KZM9G
bool "KZM-A9-GT board"
depends on ARCH_SH73A0
select ARCH_REQUIRE_GPIOLIB
ARM: mach-shmobile: Use DT_MACHINE for KZM9G Use DT_MACHINE_START() on the sh73a0 based KZM9G board. Also include a tiny DTS file to describe the board and update the Kconfig dependencies to select CONFIG_USE_OF. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-15 05:22:28 +08:00
select USE_OF
ARM: mach-shmobile: add KZM-A9-GT board support This adds very basic KZM-A9-GT board (SH73a0) support Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-04-11 11:57:31 +08:00
ARM: mach-shmobile: SH-Mobile G3 support. This adds preliminary support for the SH-Mobile G-series. The SH-Mobile G-series is a series of ARM/SH multi-core CPUs that aside from the ARM MPU are primarily composed of existing SH IP blocks. This includes initial support for the SH7367 (SH-Mobile G3) CPU and the G3EVM reference board. Only timer, serial console, and NOR flash are supported at this point. Patches for the interrupt controller, pinmux support, clock framework and runtime pm will be submitted as feature patches on top of this. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-05 19:14:49 +08:00
comment "SH-Mobile System Configuration"
sh: intc: unify evt2irq/irq2evt macros for sh and arm Move evt2irq and irq2evt macros definitions out of sh and arm includes into a common location. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-01-18 01:20:23 +08:00
config CPU_HAS_INTEVT
bool
default y
ARM: mach-shmobile: SH-Mobile G3 support. This adds preliminary support for the SH-Mobile G-series. The SH-Mobile G-series is a series of ARM/SH multi-core CPUs that aside from the ARM MPU are primarily composed of existing SH IP blocks. This includes initial support for the SH7367 (SH-Mobile G3) CPU and the G3EVM reference board. Only timer, serial console, and NOR flash are supported at this point. Patches for the interrupt controller, pinmux support, clock framework and runtime pm will be submitted as feature patches on top of this. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-05 19:14:49 +08:00
menu "Memory configuration"
config MEMORY_START
hex "Physical memory start address"
default "0x50000000" if MACH_G3EVM
Merge branch 'rmobile/mackerel' into rmobile-latest Conflicts: arch/arm/mach-shmobile/Kconfig arch/arm/mach-shmobile/Makefile Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-30 13:53:45 +08:00
default "0x40000000" if MACH_G4EVM || MACH_AP4EVB || MACH_AG5EVM || \
ARM: mach-shmobile: add armadillo800eva board support. This adds very basic armadillo800eva board (R-Mobile A1) support Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-04-06 16:28:59 +08:00
MACH_MACKEREL || MACH_BONITO || \
MACH_ARMADILLO800EVA
ARM: mach-shmobile: Kota2 SCIFA2 and SMSC911X support Kota2 base board support including the on-chip SCIFA2 serial console and the on-board SMSC911X ethernet port. The s73a0 SMP bits are also updated to include Kota2. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-08-18 13:44:07 +08:00
default "0x41000000" if MACH_KOTA2
ARM: mach-shmobile: SH-Mobile G3 support. This adds preliminary support for the SH-Mobile G-series. The SH-Mobile G-series is a series of ARM/SH multi-core CPUs that aside from the ARM MPU are primarily composed of existing SH IP blocks. This includes initial support for the SH7367 (SH-Mobile G3) CPU and the G3EVM reference board. Only timer, serial console, and NOR flash are supported at this point. Patches for the interrupt controller, pinmux support, clock framework and runtime pm will be submitted as feature patches on top of this. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-05 19:14:49 +08:00
default "0x00000000"
---help---
Tweak this only when porting to a new machine which does not
already have a defconfig. Changing it from the known correct
value on any of the known systems will only lead to disaster.
config MEMORY_SIZE
hex "Physical memory size"
default "0x08000000" if MACH_G3EVM
ARM: mach-shmobile: SH-Mobile G4 support. This adds preliminary support for the SH7377 (SH-Mobile G4) CPU and the G4EVM reference board. Only timer, serial console and NOR flash are supported at this point. Support for the interrupt controller, pinmux support, clock framework and runtime pm will be submitted as feature patches on top of this. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-05 19:15:07 +08:00
default "0x08000000" if MACH_G4EVM
ARM: mach-shmobile: add armadillo800eva board support. This adds very basic armadillo800eva board (R-Mobile A1) support Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Simon Horman <horms@verge.net.au> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-04-06 16:28:59 +08:00
default "0x20000000" if MACH_AG5EVM || MACH_BONITO || \
MACH_ARMADILLO800EVA
ARM: mach-shmobile: Kota2 SCIFA2 and SMSC911X support Kota2 base board support including the on-chip SCIFA2 serial console and the on-board SMSC911X ethernet port. The s73a0 SMP bits are also updated to include Kota2. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-08-18 13:44:07 +08:00
default "0x1e000000" if MACH_KOTA2
ARM: mach-shmobile: mackerel: fixup default memory size Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-21 19:20:45 +08:00
default "0x10000000" if MACH_AP4EVB || MACH_MACKEREL
ARM: mach-shmobile: SH-Mobile G3 support. This adds preliminary support for the SH-Mobile G-series. The SH-Mobile G-series is a series of ARM/SH multi-core CPUs that aside from the ARM MPU are primarily composed of existing SH IP blocks. This includes initial support for the SH7367 (SH-Mobile G3) CPU and the G3EVM reference board. Only timer, serial console, and NOR flash are supported at this point. Patches for the interrupt controller, pinmux support, clock framework and runtime pm will be submitted as feature patches on top of this. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-05 19:14:49 +08:00
default "0x04000000"
help
This sets the default memory size assumed by your kernel. It can
be overridden as normal by the 'mem=' argument on the kernel command
line.
endmenu
menu "Timer and clock configuration"
ARM: 6277/1: mach-shmobile: Allow users to select HZ, default to 128 Introduce SHMOBILE_TIMER_HZ for SH-Mobile. Allow users to select HZ on their system to minimize potential timer drift. Use 128 Hz as default to work well with the 32768 Hz RCLK. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-29 21:03:04 +08:00
config SHMOBILE_TIMER_HZ
int "Kernel HZ (jiffies per second)"
range 32 1024
default "128"
help
Allows the configuration of the timer frequency. It is customary
to have the timer interrupt run at 1000 Hz or 100 Hz, but in the
case of low timer frequencies other values may be more suitable.
SH-Mobile systems using a 32768 Hz RCLK for clock events may want
to select a HZ value such as 128 that can evenly divide RCLK.
A HZ value that does not divide evenly may cause timer drift.
ARM: mach-shmobile: SH-Mobile G3 support. This adds preliminary support for the SH-Mobile G-series. The SH-Mobile G-series is a series of ARM/SH multi-core CPUs that aside from the ARM MPU are primarily composed of existing SH IP blocks. This includes initial support for the SH7367 (SH-Mobile G3) CPU and the G3EVM reference board. Only timer, serial console, and NOR flash are supported at this point. Patches for the interrupt controller, pinmux support, clock framework and runtime pm will be submitted as feature patches on top of this. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-05 19:14:49 +08:00
config SH_TIMER_CMT
bool "CMT timer driver"
default y
help
This enables build of the CMT timer driver.
ARM: mach-shmobile: Enable TMU driver build Allow users to build the TMU driver on SH-Mobile ARM. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-12 17:03:19 +08:00
config SH_TIMER_TMU
bool "TMU timer driver"
default y
help
This enables build of the TMU timer driver.
clocksource: em_sti: Emma Mobile STI driver The STI hardware is based on a single 48-bit 32kHz counter that together with two individual compare registers can generate interrupts. There are no timer operating modes selectable which means that the timer can not clear on match. This driver is providing clocksource support for the 48-bit counter. Clockevents are also supported using the same timer in oneshot mode. Signed-off-by: Magnus Damm <damm@opensource.se> Cc: horms@verge.net.au Cc: arnd@arndb.de Cc: johnstul@us.ibm.com Cc: rjw@sisk.pl Cc: lethal@linux-sh.org Cc: gregkh@linuxfoundation.org Cc: olof@lixom.net Link: http://lkml.kernel.org/r/20120525070344.23443.69756.sendpatchset@w520 Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-05-25 15:03:44 +08:00
config EM_TIMER_STI
bool "STI timer driver"
default y
help
This enables build of the STI timer driver.
ARM: mach-shmobile: SH-Mobile G3 support. This adds preliminary support for the SH-Mobile G-series. The SH-Mobile G-series is a series of ARM/SH multi-core CPUs that aside from the ARM MPU are primarily composed of existing SH IP blocks. This includes initial support for the SH7367 (SH-Mobile G3) CPU and the G3EVM reference board. Only timer, serial console, and NOR flash are supported at this point. Patches for the interrupt controller, pinmux support, clock framework and runtime pm will be submitted as feature patches on top of this. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-05 19:14:49 +08:00
endmenu
ARM: mach-shmobile: Use shared clock framework Teach SH-Mobile ARM how to make use of the shared SH clock framework. This commit is one atomic switch that dumps the local hackery and instead links in the shared clock framework code in drivers/sh. A few local functions are kept in clock.c. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-12 22:21:24 +08:00
config SH_CLK_CPG
bool
ARM: mach-shmobile: include drivers/sh/Kconfig Many of the config bit are presently duplicated between the platforms, which will gradually cleaned up through centralization. For the moment we expose some new INTC features through drivers/sh/Kconfig that the ARM platforms presently don't enable, so make it generally available. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-01 23:38:06 +08:00
source "drivers/sh/Kconfig"
ARM: mach-shmobile: SH-Mobile G3 support. This adds preliminary support for the SH-Mobile G-series. The SH-Mobile G-series is a series of ARM/SH multi-core CPUs that aside from the ARM MPU are primarily composed of existing SH IP blocks. This includes initial support for the SH7367 (SH-Mobile G3) CPU and the G3EVM reference board. Only timer, serial console, and NOR flash are supported at this point. Patches for the interrupt controller, pinmux support, clock framework and runtime pm will be submitted as feature patches on top of this. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-05 19:14:49 +08:00
endif