linux-sg2042/drivers/acpi/Kconfig

416 lines
14 KiB
Plaintext
Raw Normal View History

#
# ACPI Configuration
#
menuconfig ACPI
bool "ACPI (Advanced Configuration and Power Interface) Support"
depends on !IA64_HP_SIM
depends on IA64 || X86
depends on PCI
depends on PM
select PNP
default y
---help---
Advanced Configuration and Power Interface (ACPI) support for
Linux requires an ACPI compliant platform (hardware/firmware),
and assumes the presence of OS-directed configuration and power
management (OSPM) software. This option will enlarge your
kernel by about 70K.
Linux ACPI provides a robust functional replacement for several
legacy configuration and power management interfaces, including
the Plug-and-Play BIOS specification (PnP BIOS), the
MultiProcessor Specification (MPS), and the Advanced Power
Management (APM) specification. If both ACPI and APM support
are configured, whichever is loaded first shall be used.
The ACPI SourceForge project contains the latest source code,
documentation, tools, mailing list subscription, and other
information. This project is available at:
<http://sourceforge.net/projects/acpi>
Linux support for ACPI is based on Intel Corporation's ACPI
Component Architecture (ACPI CA). For more information see:
<http://developer.intel.com/technology/iapc/acpi>
ACPI is an open industry specification co-developed by Compaq,
Intel, Microsoft, Phoenix, and Toshiba. The specification is
available at:
<http://www.acpi.info>
if ACPI
config ACPI_SLEEP
bool
depends on PM_SLEEP
default y
config ACPI_PROCFS
bool "Deprecated /proc/acpi files"
depends on PROC_FS
---help---
For backwards compatibility, this option allows
deprecated /proc/acpi/ files to exist, even when
they have been replaced by functions in /sys.
The deprecated files (and their replacements) include:
/proc/acpi/sleep (/sys/power/state)
/proc/acpi/info (/sys/modules/acpi/parameters/acpica_version)
/proc/acpi/dsdt (/sys/firmware/acpi/tables/DSDT)
/proc/acpi/fadt (/sys/firmware/acpi/tables/FACP)
/proc/acpi/debug_layer (/sys/module/acpi/parameters/debug_layer)
/proc/acpi/debug_level (/sys/module/acpi/parameters/debug_level)
This option has no effect on /proc/acpi/ files
and functions which do not yet exist in /sys.
Say N to delete /proc/acpi/ files that have moved to /sys/
config ACPI_PROCFS_POWER
bool "Deprecated power /proc/acpi directories"
depends on PROC_FS
default y
---help---
For backwards compatibility, this option allows
deprecated power /proc/acpi/ directories to exist, even when
they have been replaced by functions in /sys.
The deprecated directories (and their replacements) include:
/proc/acpi/battery/* (/sys/class/power_supply/*)
/proc/acpi/ac_adapter/* (sys/class/power_supply/*)
This option has no effect on /proc/acpi/ directories
and functions, which do not yet exist in /sys
Say N to delete power /proc/acpi/ directories that have moved to /sys/
config ACPI_SYSFS_POWER
bool "Future power /sys interface"
select POWER_SUPPLY
default y
---help---
Say N to disable power /sys interface
config ACPI_PROC_EVENT
bool "Deprecated /proc/acpi/event support"
depends on PROC_FS
default y
---help---
A user-space daemon, acpi, typically read /proc/acpi/event
and handled all ACPI sub-system generated events.
These events are now delivered to user-space via
either the input layer, or as netlink events.
This build option enables the old code for legacy
user-space implementation. After some time, this will
be moved under CONFIG_ACPI_PROCFS, and then deleted.
Say Y here to retain the old behaviour. Say N if your
user-space is newer than kernel 2.6.23 (September 2007).
config ACPI_AC
tristate "AC Adapter"
depends on X86
default y
help
This driver adds support for the AC Adapter object, which indicates
whether a system is on AC, or not. If you have a system that can
switch between A/C and battery, say Y.
config ACPI_BATTERY
tristate "Battery"
depends on X86
default y
help
This driver adds support for battery information through
/proc/acpi/battery. If you have a mobile system with a battery,
say Y.
config ACPI_BUTTON
tristate "Button"
depends on INPUT
default y
help
This driver handles events on the power, sleep and lid buttons.
A daemon reads /proc/acpi/event and perform user-defined actions
such as shutting down the system. This is necessary for
software controlled poweroff.
config ACPI_VIDEO
tristate "Video"
depends on X86 && BACKLIGHT_CLASS_DEVICE && VIDEO_OUTPUT_CONTROL
depends on INPUT
select THERMAL
help
This driver implement the ACPI Extensions For Display Adapters
for integrated graphics devices on motherboard, as specified in
ACPI 2.0 Specification, Appendix B, allowing to perform some basic
control like defining the video POST device, retrieving EDID information
or to setup a video output, etc.
Note that this is an ref. implementation only. It may or may not work
for your integrated video device.
config ACPI_FAN
tristate "Fan"
select THERMAL
default y
help
This driver adds support for ACPI fan devices, allowing user-mode
applications to perform basic fan control (on, off, status).
config ACPI_DOCK
tristate "Dock"
depends on EXPERIMENTAL
help
This driver adds support for ACPI controlled docking stations
config ACPI_BAY
tristate "Removable Drive Bay (EXPERIMENTAL)"
depends on EXPERIMENTAL
depends on ACPI_DOCK
help
This driver adds support for ACPI controlled removable drive
bays such as the IBM ultrabay or the Dell Module Bay.
config ACPI_PROCESSOR
tristate "Processor"
select THERMAL
default y
help
This driver installs ACPI as the idle handler for Linux, and uses
ACPI C2 and C3 processor states to save power, on systems that
support it. It is required by several flavors of cpufreq
Performance-state drivers.
config ACPI_HOTPLUG_CPU
bool
depends on ACPI_PROCESSOR && HOTPLUG_CPU
select ACPI_CONTAINER
default y
config ACPI_THERMAL
tristate "Thermal Zone"
depends on ACPI_PROCESSOR
select THERMAL
default y
help
This driver adds support for ACPI thermal zones. Most mobile and
some desktop systems support ACPI thermal zones. It is HIGHLY
recommended that this option be enabled, as your processor(s)
may be damaged without it.
config ACPI_NUMA
bool "NUMA support"
depends on NUMA
depends on (X86 || IA64)
default y if IA64_GENERIC || IA64_SGI_SN2
ACPI: WMI: Add ACPI-WMI mapping driver The following is an implementation of the Windows Management Instrumentation (WMI) ACPI interface mapper (PNP0C14). What it does: Parses the _WDG method and exports functions to process WMI method calls, data block query/ set commands (both based on GUID) and does basic event handling. How: WMI presents an in kernel interface here (essentially, a minimal wrapper around ACPI) (const char *guid assume the 36 character ASCII representation of a GUID - e.g. 67C3371D-95A3-4C37-BB61-DD47B491DAAB) wmi_evaluate_method(const char *guid, u8 instance, u32 method_id, const struct acpi_buffer *in, struct acpi_buffer *out) wmi_query_block(const char *guid, u8 instance, struct acpi_buffer *out) wmi_set_block(const char *guid, u38 instance, const struct acpi_buffer *in) wmi_install_notify_handler(acpi_notify_handler handler); wmi_remove_notify_handler(void); wmi_get_event_data(u32 event, struct acpi_buffer *out) wmi_has_guid(const char guid*) wmi_has_guid() is a helper function to find if a GUID exists or not on the system (a quick and easy way for WMI dependant drivers to see if the the method/ block they want exists, since GUIDs are supposed to be unique). Event handling - allow a WMI based driver to register a notifier handler for each GUID with WMI. When a notification is sent to a GUID in WMI, the handler registered with WMI is then called (it is left to the caller to ask for the WMI event data associated with the GUID, if needed). What it won't do: Unicode - The MS article[1] calls for converting between ASCII and Unicode (or vice versa) if a GUID is marked as "string". This is left up to the calling driver. Handle a MOF[1] - the WMI mapper just exports methods, data and events to userspace. MOF handling is down to userspace. Userspace interface - this will be added later. [1] http://www.microsoft.com/whdc/system/pnppwr/wmi/wmi-acpi.mspx === ChangeLog == v1 (2007-10-02): * Initial release v2 (2007-10-05): * Cleaned up code - split up super "wmi_evaluate_block" -> each external symbol now handles its own ACPI calls, rather than handing off to a "super" method (and in turn, is a lot simpler to read) * Added a find_guid() symbol - return true if a given GUID exists on the system * wmi_* functions now return type acpi_status (since they are just fancy wrappers around acpi_evaluate_object()) * Removed extra debug code v3 (2007-10-27) * More code clean up - now passes checkpatch.pl * Change data block calls - ref MS spec, method ID is not required for them, so drop it from the function parameters. * Const'ify guid in the function call parameters. * Fix _WDG buffer handling - copy the data to our own private structure. * Change WMI from tristate to bool - otherwise the external functions are not exported in linux/acpi.h if you try to build WMI as a module. * Fix more flag comparisons. * Add a maintainers entry - since I wrote this, I should take the blame for it. v4 (2007-10-30) * Add missing brace from after fixing checkpatch errors. * Rewrote event handling - allow external drivers to register with WMI to handle WMI events * Clean up flags and sanitise flag handling v5 (2007-11-03) * Add sysfs interface for userspace. Export events over netlink again. * Remove module left overs, fully convert to built-in driver. * Tweak in-kernel API to use u8 for instance, since this is what the GUID blocks use (so instance cannot be greater than u8). * Export wmi_get_event_data() for in kernel WMI drivers. v6 (2007-11-07) * Split out userspace into a different patch v7 (2007-11-20) * Fix driver to handle multiple PNP0C14 devices - store all GUIDs using the kernel's built in list functions, and just keep adding to the list every time we handle a PNP0C14 devices - GUIDs will always be unique, and WMI callers do not know or care about different devices. * Change WMI event handler registration to use its' own event handling struct; we should not pass an acpi_handle down to any WMI based drivers - they should be able to function with only the calls provided in WMI. * Update my e-mail address v8 (2007-11-28) * Convert back to a module. * Update Kconfig to default to building as a module. * Remove an erroneous printk. * Simply comments for string flag (since we now leave the handling to the caller). v9 (2007-12-07) * Add back missing MODULE_DEVICE_TABLE for autoloading * Checkpatch fixes v10 (2007-12-12) * Workaround broken GUIDs declared expensive without a WCxx method. * Minor cleanups v11 (2007-12-17) * More fixing for broken GUIDs declared expensive without a WCxx method. * Add basic EmbeddedControl region handling. v12 (2007-12-18) * Changed EC region handling code, as per Alexey's comments. v13 (2007-12-27) * Changed event handling so that we can have one event handler registered per GUID, as per Matthew Garrett's suggestion. v14 (2008-01-12) * Remove ACPI debug statements v15 (2008-02-01) * Replace two remaining 'x == NULL' type tests with '!x' v16 (2008-02-05) * Change MAINTAINERS entry, as I am not, and never have been, paid to work on WMI * Remove 'default' line from Kconfig Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk> CC: Matthew Garrett <mjg59@srcf.ucam.org> CC: Alexey Starikovskiy <aystarik@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-05 10:17:04 +08:00
config ACPI_WMI
tristate "WMI (EXPERIMENTAL)"
depends on X86
ACPI: WMI: Add ACPI-WMI mapping driver The following is an implementation of the Windows Management Instrumentation (WMI) ACPI interface mapper (PNP0C14). What it does: Parses the _WDG method and exports functions to process WMI method calls, data block query/ set commands (both based on GUID) and does basic event handling. How: WMI presents an in kernel interface here (essentially, a minimal wrapper around ACPI) (const char *guid assume the 36 character ASCII representation of a GUID - e.g. 67C3371D-95A3-4C37-BB61-DD47B491DAAB) wmi_evaluate_method(const char *guid, u8 instance, u32 method_id, const struct acpi_buffer *in, struct acpi_buffer *out) wmi_query_block(const char *guid, u8 instance, struct acpi_buffer *out) wmi_set_block(const char *guid, u38 instance, const struct acpi_buffer *in) wmi_install_notify_handler(acpi_notify_handler handler); wmi_remove_notify_handler(void); wmi_get_event_data(u32 event, struct acpi_buffer *out) wmi_has_guid(const char guid*) wmi_has_guid() is a helper function to find if a GUID exists or not on the system (a quick and easy way for WMI dependant drivers to see if the the method/ block they want exists, since GUIDs are supposed to be unique). Event handling - allow a WMI based driver to register a notifier handler for each GUID with WMI. When a notification is sent to a GUID in WMI, the handler registered with WMI is then called (it is left to the caller to ask for the WMI event data associated with the GUID, if needed). What it won't do: Unicode - The MS article[1] calls for converting between ASCII and Unicode (or vice versa) if a GUID is marked as "string". This is left up to the calling driver. Handle a MOF[1] - the WMI mapper just exports methods, data and events to userspace. MOF handling is down to userspace. Userspace interface - this will be added later. [1] http://www.microsoft.com/whdc/system/pnppwr/wmi/wmi-acpi.mspx === ChangeLog == v1 (2007-10-02): * Initial release v2 (2007-10-05): * Cleaned up code - split up super "wmi_evaluate_block" -> each external symbol now handles its own ACPI calls, rather than handing off to a "super" method (and in turn, is a lot simpler to read) * Added a find_guid() symbol - return true if a given GUID exists on the system * wmi_* functions now return type acpi_status (since they are just fancy wrappers around acpi_evaluate_object()) * Removed extra debug code v3 (2007-10-27) * More code clean up - now passes checkpatch.pl * Change data block calls - ref MS spec, method ID is not required for them, so drop it from the function parameters. * Const'ify guid in the function call parameters. * Fix _WDG buffer handling - copy the data to our own private structure. * Change WMI from tristate to bool - otherwise the external functions are not exported in linux/acpi.h if you try to build WMI as a module. * Fix more flag comparisons. * Add a maintainers entry - since I wrote this, I should take the blame for it. v4 (2007-10-30) * Add missing brace from after fixing checkpatch errors. * Rewrote event handling - allow external drivers to register with WMI to handle WMI events * Clean up flags and sanitise flag handling v5 (2007-11-03) * Add sysfs interface for userspace. Export events over netlink again. * Remove module left overs, fully convert to built-in driver. * Tweak in-kernel API to use u8 for instance, since this is what the GUID blocks use (so instance cannot be greater than u8). * Export wmi_get_event_data() for in kernel WMI drivers. v6 (2007-11-07) * Split out userspace into a different patch v7 (2007-11-20) * Fix driver to handle multiple PNP0C14 devices - store all GUIDs using the kernel's built in list functions, and just keep adding to the list every time we handle a PNP0C14 devices - GUIDs will always be unique, and WMI callers do not know or care about different devices. * Change WMI event handler registration to use its' own event handling struct; we should not pass an acpi_handle down to any WMI based drivers - they should be able to function with only the calls provided in WMI. * Update my e-mail address v8 (2007-11-28) * Convert back to a module. * Update Kconfig to default to building as a module. * Remove an erroneous printk. * Simply comments for string flag (since we now leave the handling to the caller). v9 (2007-12-07) * Add back missing MODULE_DEVICE_TABLE for autoloading * Checkpatch fixes v10 (2007-12-12) * Workaround broken GUIDs declared expensive without a WCxx method. * Minor cleanups v11 (2007-12-17) * More fixing for broken GUIDs declared expensive without a WCxx method. * Add basic EmbeddedControl region handling. v12 (2007-12-18) * Changed EC region handling code, as per Alexey's comments. v13 (2007-12-27) * Changed event handling so that we can have one event handler registered per GUID, as per Matthew Garrett's suggestion. v14 (2008-01-12) * Remove ACPI debug statements v15 (2008-02-01) * Replace two remaining 'x == NULL' type tests with '!x' v16 (2008-02-05) * Change MAINTAINERS entry, as I am not, and never have been, paid to work on WMI * Remove 'default' line from Kconfig Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk> CC: Matthew Garrett <mjg59@srcf.ucam.org> CC: Alexey Starikovskiy <aystarik@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-05 10:17:04 +08:00
depends on EXPERIMENTAL
help
This driver adds support for the ACPI-WMI (Windows Management
Instrumentation) mapper device (PNP0C14) found on some systems.
ACPI: WMI: Add ACPI-WMI mapping driver The following is an implementation of the Windows Management Instrumentation (WMI) ACPI interface mapper (PNP0C14). What it does: Parses the _WDG method and exports functions to process WMI method calls, data block query/ set commands (both based on GUID) and does basic event handling. How: WMI presents an in kernel interface here (essentially, a minimal wrapper around ACPI) (const char *guid assume the 36 character ASCII representation of a GUID - e.g. 67C3371D-95A3-4C37-BB61-DD47B491DAAB) wmi_evaluate_method(const char *guid, u8 instance, u32 method_id, const struct acpi_buffer *in, struct acpi_buffer *out) wmi_query_block(const char *guid, u8 instance, struct acpi_buffer *out) wmi_set_block(const char *guid, u38 instance, const struct acpi_buffer *in) wmi_install_notify_handler(acpi_notify_handler handler); wmi_remove_notify_handler(void); wmi_get_event_data(u32 event, struct acpi_buffer *out) wmi_has_guid(const char guid*) wmi_has_guid() is a helper function to find if a GUID exists or not on the system (a quick and easy way for WMI dependant drivers to see if the the method/ block they want exists, since GUIDs are supposed to be unique). Event handling - allow a WMI based driver to register a notifier handler for each GUID with WMI. When a notification is sent to a GUID in WMI, the handler registered with WMI is then called (it is left to the caller to ask for the WMI event data associated with the GUID, if needed). What it won't do: Unicode - The MS article[1] calls for converting between ASCII and Unicode (or vice versa) if a GUID is marked as "string". This is left up to the calling driver. Handle a MOF[1] - the WMI mapper just exports methods, data and events to userspace. MOF handling is down to userspace. Userspace interface - this will be added later. [1] http://www.microsoft.com/whdc/system/pnppwr/wmi/wmi-acpi.mspx === ChangeLog == v1 (2007-10-02): * Initial release v2 (2007-10-05): * Cleaned up code - split up super "wmi_evaluate_block" -> each external symbol now handles its own ACPI calls, rather than handing off to a "super" method (and in turn, is a lot simpler to read) * Added a find_guid() symbol - return true if a given GUID exists on the system * wmi_* functions now return type acpi_status (since they are just fancy wrappers around acpi_evaluate_object()) * Removed extra debug code v3 (2007-10-27) * More code clean up - now passes checkpatch.pl * Change data block calls - ref MS spec, method ID is not required for them, so drop it from the function parameters. * Const'ify guid in the function call parameters. * Fix _WDG buffer handling - copy the data to our own private structure. * Change WMI from tristate to bool - otherwise the external functions are not exported in linux/acpi.h if you try to build WMI as a module. * Fix more flag comparisons. * Add a maintainers entry - since I wrote this, I should take the blame for it. v4 (2007-10-30) * Add missing brace from after fixing checkpatch errors. * Rewrote event handling - allow external drivers to register with WMI to handle WMI events * Clean up flags and sanitise flag handling v5 (2007-11-03) * Add sysfs interface for userspace. Export events over netlink again. * Remove module left overs, fully convert to built-in driver. * Tweak in-kernel API to use u8 for instance, since this is what the GUID blocks use (so instance cannot be greater than u8). * Export wmi_get_event_data() for in kernel WMI drivers. v6 (2007-11-07) * Split out userspace into a different patch v7 (2007-11-20) * Fix driver to handle multiple PNP0C14 devices - store all GUIDs using the kernel's built in list functions, and just keep adding to the list every time we handle a PNP0C14 devices - GUIDs will always be unique, and WMI callers do not know or care about different devices. * Change WMI event handler registration to use its' own event handling struct; we should not pass an acpi_handle down to any WMI based drivers - they should be able to function with only the calls provided in WMI. * Update my e-mail address v8 (2007-11-28) * Convert back to a module. * Update Kconfig to default to building as a module. * Remove an erroneous printk. * Simply comments for string flag (since we now leave the handling to the caller). v9 (2007-12-07) * Add back missing MODULE_DEVICE_TABLE for autoloading * Checkpatch fixes v10 (2007-12-12) * Workaround broken GUIDs declared expensive without a WCxx method. * Minor cleanups v11 (2007-12-17) * More fixing for broken GUIDs declared expensive without a WCxx method. * Add basic EmbeddedControl region handling. v12 (2007-12-18) * Changed EC region handling code, as per Alexey's comments. v13 (2007-12-27) * Changed event handling so that we can have one event handler registered per GUID, as per Matthew Garrett's suggestion. v14 (2008-01-12) * Remove ACPI debug statements v15 (2008-02-01) * Replace two remaining 'x == NULL' type tests with '!x' v16 (2008-02-05) * Change MAINTAINERS entry, as I am not, and never have been, paid to work on WMI * Remove 'default' line from Kconfig Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk> CC: Matthew Garrett <mjg59@srcf.ucam.org> CC: Alexey Starikovskiy <aystarik@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-05 10:17:04 +08:00
ACPI-WMI is a proprietary extension to ACPI to expose parts of the
ACPI firmware to userspace - this is done through various vendor
defined methods and data blocks in a PNP0C14 device, which are then
made available for userspace to call.
The implementation of this in Linux currently only exposes this to
other kernel space drivers.
This driver is a required dependency to build the firmware specific
drivers needed on many machines, including Acer and HP laptops.
It is safe to enable this driver even if your DSDT doesn't define
any ACPI-WMI devices.
ACPI: WMI: Add ACPI-WMI mapping driver The following is an implementation of the Windows Management Instrumentation (WMI) ACPI interface mapper (PNP0C14). What it does: Parses the _WDG method and exports functions to process WMI method calls, data block query/ set commands (both based on GUID) and does basic event handling. How: WMI presents an in kernel interface here (essentially, a minimal wrapper around ACPI) (const char *guid assume the 36 character ASCII representation of a GUID - e.g. 67C3371D-95A3-4C37-BB61-DD47B491DAAB) wmi_evaluate_method(const char *guid, u8 instance, u32 method_id, const struct acpi_buffer *in, struct acpi_buffer *out) wmi_query_block(const char *guid, u8 instance, struct acpi_buffer *out) wmi_set_block(const char *guid, u38 instance, const struct acpi_buffer *in) wmi_install_notify_handler(acpi_notify_handler handler); wmi_remove_notify_handler(void); wmi_get_event_data(u32 event, struct acpi_buffer *out) wmi_has_guid(const char guid*) wmi_has_guid() is a helper function to find if a GUID exists or not on the system (a quick and easy way for WMI dependant drivers to see if the the method/ block they want exists, since GUIDs are supposed to be unique). Event handling - allow a WMI based driver to register a notifier handler for each GUID with WMI. When a notification is sent to a GUID in WMI, the handler registered with WMI is then called (it is left to the caller to ask for the WMI event data associated with the GUID, if needed). What it won't do: Unicode - The MS article[1] calls for converting between ASCII and Unicode (or vice versa) if a GUID is marked as "string". This is left up to the calling driver. Handle a MOF[1] - the WMI mapper just exports methods, data and events to userspace. MOF handling is down to userspace. Userspace interface - this will be added later. [1] http://www.microsoft.com/whdc/system/pnppwr/wmi/wmi-acpi.mspx === ChangeLog == v1 (2007-10-02): * Initial release v2 (2007-10-05): * Cleaned up code - split up super "wmi_evaluate_block" -> each external symbol now handles its own ACPI calls, rather than handing off to a "super" method (and in turn, is a lot simpler to read) * Added a find_guid() symbol - return true if a given GUID exists on the system * wmi_* functions now return type acpi_status (since they are just fancy wrappers around acpi_evaluate_object()) * Removed extra debug code v3 (2007-10-27) * More code clean up - now passes checkpatch.pl * Change data block calls - ref MS spec, method ID is not required for them, so drop it from the function parameters. * Const'ify guid in the function call parameters. * Fix _WDG buffer handling - copy the data to our own private structure. * Change WMI from tristate to bool - otherwise the external functions are not exported in linux/acpi.h if you try to build WMI as a module. * Fix more flag comparisons. * Add a maintainers entry - since I wrote this, I should take the blame for it. v4 (2007-10-30) * Add missing brace from after fixing checkpatch errors. * Rewrote event handling - allow external drivers to register with WMI to handle WMI events * Clean up flags and sanitise flag handling v5 (2007-11-03) * Add sysfs interface for userspace. Export events over netlink again. * Remove module left overs, fully convert to built-in driver. * Tweak in-kernel API to use u8 for instance, since this is what the GUID blocks use (so instance cannot be greater than u8). * Export wmi_get_event_data() for in kernel WMI drivers. v6 (2007-11-07) * Split out userspace into a different patch v7 (2007-11-20) * Fix driver to handle multiple PNP0C14 devices - store all GUIDs using the kernel's built in list functions, and just keep adding to the list every time we handle a PNP0C14 devices - GUIDs will always be unique, and WMI callers do not know or care about different devices. * Change WMI event handler registration to use its' own event handling struct; we should not pass an acpi_handle down to any WMI based drivers - they should be able to function with only the calls provided in WMI. * Update my e-mail address v8 (2007-11-28) * Convert back to a module. * Update Kconfig to default to building as a module. * Remove an erroneous printk. * Simply comments for string flag (since we now leave the handling to the caller). v9 (2007-12-07) * Add back missing MODULE_DEVICE_TABLE for autoloading * Checkpatch fixes v10 (2007-12-12) * Workaround broken GUIDs declared expensive without a WCxx method. * Minor cleanups v11 (2007-12-17) * More fixing for broken GUIDs declared expensive without a WCxx method. * Add basic EmbeddedControl region handling. v12 (2007-12-18) * Changed EC region handling code, as per Alexey's comments. v13 (2007-12-27) * Changed event handling so that we can have one event handler registered per GUID, as per Matthew Garrett's suggestion. v14 (2008-01-12) * Remove ACPI debug statements v15 (2008-02-01) * Replace two remaining 'x == NULL' type tests with '!x' v16 (2008-02-05) * Change MAINTAINERS entry, as I am not, and never have been, paid to work on WMI * Remove 'default' line from Kconfig Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk> CC: Matthew Garrett <mjg59@srcf.ucam.org> CC: Alexey Starikovskiy <aystarik@gmail.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-05 10:17:04 +08:00
config ACPI_ASUS
tristate "ASUS/Medion Laptop Extras"
depends on X86
select BACKLIGHT_CLASS_DEVICE
---help---
This driver provides support for extra features of ACPI-compatible
ASUS laptops. As some of Medion laptops are made by ASUS, it may also
support some Medion laptops (such as 9675 for example). It makes all
the extra buttons generate standard ACPI events that go through
/proc/acpi/events, and (on some models) adds support for changing the
display brightness and output, switching the LCD backlight on and off,
and most importantly, allows you to blink those fancy LEDs intended
for reporting mail and wireless status.
Note: display switching code is currently considered EXPERIMENTAL,
toying with these values may even lock your machine.
All settings are changed via /proc/acpi/asus directory entries. Owner
and group for these entries can be set with asus_uid and asus_gid
parameters.
More information and a userspace daemon for handling the extra buttons
at <http://sourceforge.net/projects/acpi4asus/>.
If you have an ACPI-compatible ASUS laptop, say Y or M here. This
driver is still under development, so if your laptop is unsupported or
something works not quite as expected, please use the mailing list
available on the above page (acpi4asus-user@lists.sourceforge.net).
NOTE: This driver is deprecated and will probably be removed soon,
use asus-laptop instead.
config ACPI_TOSHIBA
tristate "Toshiba Laptop Extras"
depends on X86
select BACKLIGHT_CLASS_DEVICE
---help---
This driver adds support for access to certain system settings
on "legacy free" Toshiba laptops. These laptops can be recognized by
their lack of a BIOS setup menu and APM support.
On these machines, all system configuration is handled through the
ACPI. This driver is required for access to controls not covered
by the general ACPI drivers, such as LCD brightness, video output,
etc.
This driver differs from the non-ACPI Toshiba laptop driver (located
under "Processor type and features") in several aspects.
Configuration is accessed by reading and writing text files in the
/proc tree instead of by program interface to /dev. Furthermore, no
power management functions are exposed, as those are handled by the
general ACPI drivers.
More information about this driver is available at
<http://memebeam.org/toys/ToshibaAcpiDriver>.
If you have a legacy free Toshiba laptop (such as the Libretto L1
series), say Y.
config ACPI_CUSTOM_DSDT_FILE
string "Custom DSDT Table file to include"
default ""
depends on !STANDALONE
help
This option supports a custom DSDT by linking it into the kernel.
See Documentation/acpi/dsdt-override.txt
Enter the full path name to the file which includes the AmlCode
declaration.
If unsure, don't enter a file name.
config ACPI_CUSTOM_DSDT
bool
default ACPI_CUSTOM_DSDT_FILE != ""
config ACPI_BLACKLIST_YEAR
int "Disable ACPI for systems before Jan 1st this year" if X86_32
default 0
help
enter a 4-digit year, eg. 2001 to disable ACPI by default
on platforms with DMI BIOS date before January 1st that year.
"acpi=force" can be used to override this mechanism.
Enter 0 to disable this mechanism and allow ACPI to
run by default no matter what the year. (default)
config ACPI_DEBUG
bool "Debug Statements"
default n
help
The ACPI driver can optionally report errors with a great deal
of verbosity. Saying Y enables these statements. This will increase
your kernel size by around 50K.
config ACPI_DEBUG_FUNC_TRACE
bool "Additionally enable ACPI function tracing"
default n
depends on ACPI_DEBUG
help
ACPI Debug Statements slow down ACPI processing. Function trace
is about half of the penalty and is rarely useful.
config ACPI_EC
bool
default y
help
This driver is required on some systems for the proper operation of
the battery and thermal drivers. If you are compiling for a
mobile system, say Y.
config ACPI_PCI_SLOT
tristate "PCI slot detection driver"
default n
help
This driver will attempt to discover all PCI slots in your system,
and creates entries in /sys/bus/pci/slots/. This feature can
help you correlate PCI bus addresses with the physical geography
of your slots. If you are unsure, say N.
config ACPI_POWER
bool
default y
config ACPI_SYSTEM
bool
default y
help
This driver will enable your system to shut down using ACPI, and
dump your ACPI DSDT table using /proc/acpi/dsdt.
config X86_PM_TIMER
bool "Power Management Timer Support" if EMBEDDED
depends on X86
default y
help
The Power Management Timer is available on all ACPI-capable,
in most cases even if ACPI is unusable or blacklisted.
This timing source is not affected by power management features
like aggressive processor idling, throttling, frequency and/or
voltage scaling, unlike the commonly used Time Stamp Counter
(TSC) timing source.
You should nearly always say Y here because many modern
systems require this timer.
config ACPI_CONTAINER
tristate "ACPI0004,PNP0A05 and PNP0A06 Container Driver (EXPERIMENTAL)"
depends on EXPERIMENTAL
default (ACPI_HOTPLUG_MEMORY || ACPI_HOTPLUG_CPU || ACPI_HOTPLUG_IO)
---help---
This allows _physical_ insertion and removal of CPUs and memory.
This can be useful, for example, on NUMA machines that support
ACPI based physical hotplug of nodes, or non-NUMA machines that
support physical cpu/memory hot-plug.
If one selects "m", this driver can be loaded with
"modprobe acpi_container".
config ACPI_HOTPLUG_MEMORY
tristate "Memory Hotplug"
depends on MEMORY_HOTPLUG
default n
help
This driver adds supports for ACPI Memory Hotplug. This driver
provides support for fielding notifications on ACPI memory
devices (PNP0C80) which represent memory ranges that may be
onlined or offlined during runtime.
Enabling this driver assumes that your platform hardware
and firmware have support for hot-plugging physical memory. If
your system does not support physically adding or ripping out
memory DIMMs at some platform defined granularity (individually
or as a bank) at runtime, then you need not enable this driver.
If one selects "m," this driver can be loaded using the following
command:
$>modprobe acpi_memhotplug
config ACPI_SBS
tristate "Smart Battery System"
depends on X86
help
This driver adds support for the Smart Battery System, another
type of access to battery information, found on some laptops.
endif # ACPI