hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
linux-sg2042/drivers/infiniband/core/sa_query.c

1285 lines
33 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* Copyright (c) 2004 Topspin Communications. All rights reserved.
IB: Remove garbage non-ASCII characters from comments A few files had 0xa0 characters in comments. Remove them so that the files are clean ASCII text. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-10 07:17:32 +08:00
* Copyright (c) 2005 Voltaire, Inc. All rights reserved.
IB/sa: Require SA registration Require users to register with SA module, to prevent the sa_query module text from going away while an SA query callback is still running. Update all in-tree users for the new interface. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-22 07:40:12 +08:00
* Copyright (c) 2006 Intel Corporation. All rights reserved.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/random.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/dma-mapping.h>
#include <linux/kref.h>
#include <linux/idr.h>
[PATCH] fix missing includes I recently picked up my older work to remove unnecessary #includes of sched.h, starting from a patch by Dave Jones to not include sched.h from module.h. This reduces the number of indirect includes of sched.h by ~300. Another ~400 pointless direct includes can be removed after this disentangling (patch to follow later). However, quite a few indirect includes need to be fixed up for this. In order to feed the patches through -mm with as little disturbance as possible, I've split out the fixes I accumulated up to now (complete for i386 and x86_64, more archs to follow later) and post them before the real patch. This way this large part of the patch is kept simple with only adding #includes, and all hunks are independent of each other. So if any hunk rejects or gets in the way of other patches, just drop it. My scripts will pick it up again in the next round. Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31 07:03:48 +08:00
#include <linux/workqueue.h>
IB/core: Ethernet L2 attributes in verbs/cm structures This patch add the support for Ethernet L2 attributes in the verbs/cm/cma structures. When dealing with L2 Ethernet, we should use smac, dmac, vlan ID and priority in a similar manner that the IB L2 (and the L4 PKEY) attributes are used. Thus, those attributes were added to the following structures: * ib_ah_attr - added dmac * ib_qp_attr - added smac and vlan_id, (sl remains vlan priority) * ib_wc - added smac, vlan_id * ib_sa_path_rec - added smac, dmac, vlan_id * cm_av - added smac and vlan_id For the path record structure, extra care was taken to avoid the new fields when packing it into wire format, so we don't break the IB CM and SA wire protocol. On the active side, the CM fills. its internal structures from the path provided by the ULP. We add there taking the ETH L2 attributes and placing them into the CM Address Handle (struct cm_av). On the passive side, the CM fills its internal structures from the WC associated with the REQ message. We add there taking the ETH L2 attributes from the WC. When the HW driver provides the required ETH L2 attributes in the WC, they set the IB_WC_WITH_SMAC and IB_WC_WITH_VLAN flags. The IB core code checks for the presence of these flags, and in their absence does address resolution from the ib_init_ah_from_wc() helper function. ib_modify_qp_is_ok is also updated to consider the link layer. Some parameters are mandatory for Ethernet link layer, while they are irrelevant for IB. Vendor drivers are modified to support the new function signature. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-12-13 00:03:11 +08:00
#include <uapi/linux/if_ether.h>
[PATCH] IB: move include files to include/rdma Move the InfiniBand headers from drivers/infiniband/include to include/rdma. This allows InfiniBand-using code to live elsewhere, and lets us remove the ugly EXTRA_CFLAGS include path from the InfiniBand Makefiles. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-08-26 04:40:04 +08:00
#include <rdma/ib_pack.h>
IB/sa: Add ib_init_ah_from_path() Add a call to initialize address handle attributes given a path record. This is used by the CM, and would be useful for users of UD QPs. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-18 11:37:39 +08:00
#include <rdma/ib_cache.h>
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
#include "sa.h"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
MODULE_AUTHOR("Roland Dreier");
MODULE_DESCRIPTION("InfiniBand subnet administration query support");
MODULE_LICENSE("Dual BSD/GPL");
struct ib_sa_sm_ah {
struct ib_ah *ah;
struct kref ref;
IB/sa: Make sure SA queries use default P_Key MADs sent to the SA should use the the default P_Key (0x7fff/0xffff). There's no requirement that the default P_Key is stored at index 0 in the local P_Key table, so add code to the sa_query module to look up the index of the default P_Key when creating an address handle for the SA (which is done any time the P_Key table might change), and use this index for all SA queries. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-19 02:03:58 +08:00
u16 pkey_index;
IB/sa: Set src_path_bits correctly in ib_init_ah_from_path() src_path_bits needs to mask off the base LID value. Signed-off-by: Sean Hefty <sean.hefty@intel.com>
2007-04-06 01:51:10 +08:00
u8 src_path_mask;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
};
struct ib_sa_port {
struct ib_mad_agent *agent;
struct ib_sa_sm_ah *sm_ah;
struct work_struct update_task;
spinlock_t ah_lock;
u8 port_num;
};
struct ib_sa_device {
int start_port, end_port;
struct ib_event_handler event_handler;
struct ib_sa_port port[0];
};
struct ib_sa_query {
void (*callback)(struct ib_sa_query *, int, struct ib_sa_mad *);
void (*release)(struct ib_sa_query *);
IB/sa: Require SA registration Require users to register with SA module, to prevent the sa_query module text from going away while an SA query callback is still running. Update all in-tree users for the new interface. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-22 07:40:12 +08:00
struct ib_sa_client *client;
[IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-26 01:51:39 +08:00
struct ib_sa_port *port;
struct ib_mad_send_buf *mad_buf;
struct ib_sa_sm_ah *sm_ah;
int id;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
};
[PATCH] IB: Add Service Record support to SA client Add Service Record support to SA client Signed-off-by: Hal Rosenstock <halr@voltaire.com> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28 02:45:38 +08:00
struct ib_sa_service_query {
void (*callback)(int, struct ib_sa_service_rec *, void *);
void *context;
struct ib_sa_query sa_query;
};
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct ib_sa_path_query {
void (*callback)(int, struct ib_sa_path_rec *, void *);
void *context;
struct ib_sa_query sa_query;
};
IB/sa: Add GuidInfoRecord query support This query is needed for SRIOV alias GUID support. The query is implemented per the IB Spec definition in section 15.2.5.18 (GuidInfoRecord). Signed-off-by: Erez Shitrit <erezsh@mellanox.co.il> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-06-19 16:21:38 +08:00
struct ib_sa_guidinfo_query {
void (*callback)(int, struct ib_sa_guidinfo_rec *, void *);
void *context;
struct ib_sa_query sa_query;
};
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct ib_sa_mcmember_query {
void (*callback)(int, struct ib_sa_mcmember_rec *, void *);
void *context;
struct ib_sa_query sa_query;
};
static void ib_sa_add_one(struct ib_device *device);
static void ib_sa_remove_one(struct ib_device *device);
static struct ib_client sa_client = {
.name = "sa",
.add = ib_sa_add_one,
.remove = ib_sa_remove_one
};
IB: Use DEFINE_SPINLOCK() for static spinlocks Rather than just defining static spinlock_t variables and then initializing them later in init functions, simply define them with DEFINE_SPINLOCK() and remove the calls to spin_lock_init(). This cleans up the source a tad and also shrinks the compiled code; eg on x86-64: add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-40 (-40) function old new delta ib_uverbs_init 336 326 -10 ib_mad_init_module 147 137 -10 ib_sa_init 123 103 -20 Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-06 11:24:23 +08:00
static DEFINE_SPINLOCK(idr_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static DEFINE_IDR(query_idr);
IB: Use DEFINE_SPINLOCK() for static spinlocks Rather than just defining static spinlock_t variables and then initializing them later in init functions, simply define them with DEFINE_SPINLOCK() and remove the calls to spin_lock_init(). This cleans up the source a tad and also shrinks the compiled code; eg on x86-64: add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-40 (-40) function old new delta ib_uverbs_init 336 326 -10 ib_mad_init_module 147 137 -10 ib_sa_init 123 103 -20 Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-09-06 11:24:23 +08:00
static DEFINE_SPINLOCK(tid_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static u32 tid;
#define PATH_REC_FIELD(field) \
.struct_offset_bytes = offsetof(struct ib_sa_path_rec, field), \
.struct_size_bytes = sizeof ((struct ib_sa_path_rec *) 0)->field, \
.field_name = "sa_path_rec:" #field
static const struct ib_field path_rec_table[] = {
IB/sa: Add new QoS fields to path record The QoS annex defines new fields for path records. Add them to the ib_sa for consumers that want to use them. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Reviewed-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-09 06:41:28 +08:00
{ PATH_REC_FIELD(service_id),
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.offset_words = 0,
.offset_bits = 0,
IB/sa: Add new QoS fields to path record The QoS annex defines new fields for path records. Add them to the ib_sa for consumers that want to use them. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Reviewed-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-09 06:41:28 +08:00
.size_bits = 64 },
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{ PATH_REC_FIELD(dgid),
.offset_words = 2,
.offset_bits = 0,
.size_bits = 128 },
{ PATH_REC_FIELD(sgid),
.offset_words = 6,
.offset_bits = 0,
.size_bits = 128 },
{ PATH_REC_FIELD(dlid),
.offset_words = 10,
.offset_bits = 0,
.size_bits = 16 },
{ PATH_REC_FIELD(slid),
.offset_words = 10,
.offset_bits = 16,
.size_bits = 16 },
{ PATH_REC_FIELD(raw_traffic),
.offset_words = 11,
.offset_bits = 0,
.size_bits = 1 },
{ RESERVED,
.offset_words = 11,
.offset_bits = 1,
.size_bits = 3 },
{ PATH_REC_FIELD(flow_label),
.offset_words = 11,
.offset_bits = 4,
.size_bits = 20 },
{ PATH_REC_FIELD(hop_limit),
.offset_words = 11,
.offset_bits = 24,
.size_bits = 8 },
{ PATH_REC_FIELD(traffic_class),
.offset_words = 12,
.offset_bits = 0,
.size_bits = 8 },
{ PATH_REC_FIELD(reversible),
.offset_words = 12,
.offset_bits = 8,
.size_bits = 1 },
{ PATH_REC_FIELD(numb_path),
.offset_words = 12,
.offset_bits = 9,
.size_bits = 7 },
{ PATH_REC_FIELD(pkey),
.offset_words = 12,
.offset_bits = 16,
.size_bits = 16 },
IB/sa: Add new QoS fields to path record The QoS annex defines new fields for path records. Add them to the ib_sa for consumers that want to use them. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Reviewed-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-09 06:41:28 +08:00
{ PATH_REC_FIELD(qos_class),
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.offset_words = 13,
.offset_bits = 0,
.size_bits = 12 },
{ PATH_REC_FIELD(sl),
.offset_words = 13,
.offset_bits = 12,
.size_bits = 4 },
{ PATH_REC_FIELD(mtu_selector),
.offset_words = 13,
.offset_bits = 16,
.size_bits = 2 },
{ PATH_REC_FIELD(mtu),
.offset_words = 13,
.offset_bits = 18,
.size_bits = 6 },
{ PATH_REC_FIELD(rate_selector),
.offset_words = 13,
.offset_bits = 24,
.size_bits = 2 },
{ PATH_REC_FIELD(rate),
.offset_words = 13,
.offset_bits = 26,
.size_bits = 6 },
{ PATH_REC_FIELD(packet_life_time_selector),
.offset_words = 14,
.offset_bits = 0,
.size_bits = 2 },
{ PATH_REC_FIELD(packet_life_time),
.offset_words = 14,
.offset_bits = 2,
.size_bits = 6 },
{ PATH_REC_FIELD(preference),
.offset_words = 14,
.offset_bits = 8,
.size_bits = 8 },
{ RESERVED,
.offset_words = 14,
.offset_bits = 16,
.size_bits = 48 },
};
#define MCMEMBER_REC_FIELD(field) \
.struct_offset_bytes = offsetof(struct ib_sa_mcmember_rec, field), \
.struct_size_bytes = sizeof ((struct ib_sa_mcmember_rec *) 0)->field, \
.field_name = "sa_mcmember_rec:" #field
static const struct ib_field mcmember_rec_table[] = {
{ MCMEMBER_REC_FIELD(mgid),
.offset_words = 0,
.offset_bits = 0,
.size_bits = 128 },
{ MCMEMBER_REC_FIELD(port_gid),
.offset_words = 4,
.offset_bits = 0,
.size_bits = 128 },
{ MCMEMBER_REC_FIELD(qkey),
.offset_words = 8,
.offset_bits = 0,
.size_bits = 32 },
{ MCMEMBER_REC_FIELD(mlid),
.offset_words = 9,
.offset_bits = 0,
.size_bits = 16 },
{ MCMEMBER_REC_FIELD(mtu_selector),
.offset_words = 9,
.offset_bits = 16,
.size_bits = 2 },
{ MCMEMBER_REC_FIELD(mtu),
.offset_words = 9,
.offset_bits = 18,
.size_bits = 6 },
{ MCMEMBER_REC_FIELD(traffic_class),
.offset_words = 9,
.offset_bits = 24,
.size_bits = 8 },
{ MCMEMBER_REC_FIELD(pkey),
.offset_words = 10,
.offset_bits = 0,
.size_bits = 16 },
{ MCMEMBER_REC_FIELD(rate_selector),
.offset_words = 10,
.offset_bits = 16,
.size_bits = 2 },
{ MCMEMBER_REC_FIELD(rate),
.offset_words = 10,
.offset_bits = 18,
.size_bits = 6 },
{ MCMEMBER_REC_FIELD(packet_life_time_selector),
.offset_words = 10,
.offset_bits = 24,
.size_bits = 2 },
{ MCMEMBER_REC_FIELD(packet_life_time),
.offset_words = 10,
.offset_bits = 26,
.size_bits = 6 },
{ MCMEMBER_REC_FIELD(sl),
.offset_words = 11,
.offset_bits = 0,
.size_bits = 4 },
{ MCMEMBER_REC_FIELD(flow_label),
.offset_words = 11,
.offset_bits = 4,
.size_bits = 20 },
{ MCMEMBER_REC_FIELD(hop_limit),
.offset_words = 11,
.offset_bits = 24,
.size_bits = 8 },
{ MCMEMBER_REC_FIELD(scope),
.offset_words = 12,
.offset_bits = 0,
.size_bits = 4 },
{ MCMEMBER_REC_FIELD(join_state),
.offset_words = 12,
.offset_bits = 4,
.size_bits = 4 },
{ MCMEMBER_REC_FIELD(proxy_join),
.offset_words = 12,
.offset_bits = 8,
.size_bits = 1 },
{ RESERVED,
.offset_words = 12,
.offset_bits = 9,
.size_bits = 23 },
};
[PATCH] IB: Add Service Record support to SA client Add Service Record support to SA client Signed-off-by: Hal Rosenstock <halr@voltaire.com> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28 02:45:38 +08:00
#define SERVICE_REC_FIELD(field) \
.struct_offset_bytes = offsetof(struct ib_sa_service_rec, field), \
.struct_size_bytes = sizeof ((struct ib_sa_service_rec *) 0)->field, \
.field_name = "sa_service_rec:" #field
static const struct ib_field service_rec_table[] = {
{ SERVICE_REC_FIELD(id),
.offset_words = 0,
.offset_bits = 0,
.size_bits = 64 },
{ SERVICE_REC_FIELD(gid),
.offset_words = 2,
.offset_bits = 0,
.size_bits = 128 },
{ SERVICE_REC_FIELD(pkey),
.offset_words = 6,
.offset_bits = 0,
.size_bits = 16 },
{ SERVICE_REC_FIELD(lease),
.offset_words = 7,
.offset_bits = 0,
.size_bits = 32 },
{ SERVICE_REC_FIELD(key),
.offset_words = 8,
.offset_bits = 0,
.size_bits = 128 },
{ SERVICE_REC_FIELD(name),
.offset_words = 12,
.offset_bits = 0,
.size_bits = 64*8 },
{ SERVICE_REC_FIELD(data8),
.offset_words = 28,
.offset_bits = 0,
.size_bits = 16*8 },
{ SERVICE_REC_FIELD(data16),
.offset_words = 32,
.offset_bits = 0,
.size_bits = 8*16 },
{ SERVICE_REC_FIELD(data32),
.offset_words = 36,
.offset_bits = 0,
.size_bits = 4*32 },
{ SERVICE_REC_FIELD(data64),
.offset_words = 40,
.offset_bits = 0,
.size_bits = 2*64 },
};
IB/sa: Add GuidInfoRecord query support This query is needed for SRIOV alias GUID support. The query is implemented per the IB Spec definition in section 15.2.5.18 (GuidInfoRecord). Signed-off-by: Erez Shitrit <erezsh@mellanox.co.il> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-06-19 16:21:38 +08:00
#define GUIDINFO_REC_FIELD(field) \
.struct_offset_bytes = offsetof(struct ib_sa_guidinfo_rec, field), \
.struct_size_bytes = sizeof((struct ib_sa_guidinfo_rec *) 0)->field, \
.field_name = "sa_guidinfo_rec:" #field
static const struct ib_field guidinfo_rec_table[] = {
{ GUIDINFO_REC_FIELD(lid),
.offset_words = 0,
.offset_bits = 0,
.size_bits = 16 },
{ GUIDINFO_REC_FIELD(block_num),
.offset_words = 0,
.offset_bits = 16,
.size_bits = 8 },
{ GUIDINFO_REC_FIELD(res1),
.offset_words = 0,
.offset_bits = 24,
.size_bits = 8 },
{ GUIDINFO_REC_FIELD(res2),
.offset_words = 1,
.offset_bits = 0,
.size_bits = 32 },
{ GUIDINFO_REC_FIELD(guid_info_list),
.offset_words = 2,
.offset_bits = 0,
.size_bits = 512 },
};
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static void free_sm_ah(struct kref *kref)
{
struct ib_sa_sm_ah *sm_ah = container_of(kref, struct ib_sa_sm_ah, ref);
ib_destroy_ah(sm_ah->ah);
kfree(sm_ah);
}
WorkStruct: make allyesconfig Fix up for make allyesconfig. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-11-22 22:57:56 +08:00
static void update_sm_ah(struct work_struct *work)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
WorkStruct: make allyesconfig Fix up for make allyesconfig. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-11-22 22:57:56 +08:00
struct ib_sa_port *port =
container_of(work, struct ib_sa_port, update_task);
IB/sa: Fail requests made while creating new SM AH This patch solves a race that occurs after an event occurs that causes the SA query module to flush its SM address handle (AH). When SM AH becomes invalid and needs an update it is handled by the global workqueue. On the other hand this event is also handled in the IPoIB driver by queuing work in the ipoib_workqueue that does multicast joins. Although queuing is in the right order, it is done to 2 different workqueues and so there is no guarantee that the first to be queued is the first to be executed. This causes a problem because IPoIB may end up sending an request to the old SM, which will take a long time to time out (since the old SM is gone); this leads to a much longer than necessary interruption in multicast traffer. The patch sets the SA query module's SM AH to NULL when the event occurs, and until update_sm_ah() is done, any request that needs sm_ah fails with -EAGAIN return status. For consumers, the patch doesn't make things worse. Before the patch, MADs are sent to the wrong SM so the request gets lost. Consumers can be improved if they examine the return code and respond to EAGAIN properly but even without an improvement the situation is not getting worse. Signed-off-by: Moni Levy <monil@voltaire.com> Signed-off-by: Moni Shoua <monis@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-15 14:48:43 +08:00
struct ib_sa_sm_ah *new_ah;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct ib_port_attr port_attr;
struct ib_ah_attr ah_attr;
if (ib_query_port(port->agent->device, port->port_num, &port_attr)) {
printk(KERN_WARNING "Couldn't query port\n");
return;
}
new_ah = kmalloc(sizeof *new_ah, GFP_KERNEL);
if (!new_ah) {
printk(KERN_WARNING "Couldn't allocate new SM AH\n");
return;
}
kref_init(&new_ah->ref);
IB/sa: Set src_path_bits correctly in ib_init_ah_from_path() src_path_bits needs to mask off the base LID value. Signed-off-by: Sean Hefty <sean.hefty@intel.com>
2007-04-06 01:51:10 +08:00
new_ah->src_path_mask = (1 << port_attr.lmc) - 1;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
IB/sa: Make sure SA queries use default P_Key MADs sent to the SA should use the the default P_Key (0x7fff/0xffff). There's no requirement that the default P_Key is stored at index 0 in the local P_Key table, so add code to the sa_query module to look up the index of the default P_Key when creating an address handle for the SA (which is done any time the P_Key table might change), and use this index for all SA queries. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-19 02:03:58 +08:00
new_ah->pkey_index = 0;
if (ib_find_pkey(port->agent->device, port->port_num,
IB/sa: Don't need to check for default P_Key twice Now that ib_find_pkey() ignores the membership bit of P_Keys, there's no need for ib_sa to look for both 0x7fff and 0xffff in a port's P_Key table. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-08-04 01:45:17 +08:00
IB_DEFAULT_PKEY_FULL, &new_ah->pkey_index))
IB/sa: Make sure SA queries use default P_Key MADs sent to the SA should use the the default P_Key (0x7fff/0xffff). There's no requirement that the default P_Key is stored at index 0 in the local P_Key table, so add code to the sa_query module to look up the index of the default P_Key when creating an address handle for the SA (which is done any time the P_Key table might change), and use this index for all SA queries. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-19 02:03:58 +08:00
printk(KERN_ERR "Couldn't find index for default PKey\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
memset(&ah_attr, 0, sizeof ah_attr);
ah_attr.dlid = port_attr.sm_lid;
ah_attr.sl = port_attr.sm_sl;
ah_attr.port_num = port->port_num;
new_ah->ah = ib_create_ah(port->agent->qp->pd, &ah_attr);
if (IS_ERR(new_ah->ah)) {
printk(KERN_WARNING "Couldn't create new SM AH\n");
kfree(new_ah);
return;
}
spin_lock_irq(&port->ah_lock);
IB/sa_query: Fix AH leak due to update_sm_ah() race Our testing uncovered a race condition in ib_sa_event(): spin_lock_irqsave(&port->ah_lock, flags); if (port->sm_ah) kref_put(&port->sm_ah->ref, free_sm_ah); port->sm_ah = NULL; spin_unlock_irqrestore(&port->ah_lock, flags); schedule_work(&sa_dev->port[event->element.port_num - sa_dev->start_port].update_task); If two events occur back-to-back (e.g., client-reregister and LID change), both may pass the spinlock-protected code above before the scheduled work updates the port->sm_ah handle. Then if the scheduled work ends up running twice, the second operation will then find a non-NULL port->sm_ah, and will simply overwrite it in update_sm_ah -- resulting in an AH leak. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-03-04 06:30:01 +08:00
if (port->sm_ah)
kref_put(&port->sm_ah->ref, free_sm_ah);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
port->sm_ah = new_ah;
spin_unlock_irq(&port->ah_lock);
}
static void ib_sa_event(struct ib_event_handler *handler, struct ib_event *event)
{
if (event->event == IB_EVENT_PORT_ERR ||
event->event == IB_EVENT_PORT_ACTIVE ||
event->event == IB_EVENT_LID_CHANGE ||
event->event == IB_EVENT_PKEY_CHANGE ||
IB/core: Fix SM LID/LID change with client reregister set After commit 12bbb2b7be7f5564952ebe0196623e97464b8ac5, when SM LID change or LID change MAD also has a client reregistration bit set, only CLIENT_REREGISTER event is generated. As a result, the sa_query module and the cache module don't update the port information, and ULPs (e.g. IPoIB) stop working. This is the regression we observe as compared to 2.6.17. Rather than generate multiple events (which would have negative performance impact), let us simply let cache and SA query respond to reregister event in the same way as to LID and SM change events. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-15 22:20:50 +08:00
event->event == IB_EVENT_SM_CHANGE ||
event->event == IB_EVENT_CLIENT_REREGISTER) {
IB/sa: Fail requests made while creating new SM AH This patch solves a race that occurs after an event occurs that causes the SA query module to flush its SM address handle (AH). When SM AH becomes invalid and needs an update it is handled by the global workqueue. On the other hand this event is also handled in the IPoIB driver by queuing work in the ipoib_workqueue that does multicast joins. Although queuing is in the right order, it is done to 2 different workqueues and so there is no guarantee that the first to be queued is the first to be executed. This causes a problem because IPoIB may end up sending an request to the old SM, which will take a long time to time out (since the old SM is gone); this leads to a much longer than necessary interruption in multicast traffer. The patch sets the SA query module's SM AH to NULL when the event occurs, and until update_sm_ah() is done, any request that needs sm_ah fails with -EAGAIN return status. For consumers, the patch doesn't make things worse. Before the patch, MADs are sent to the wrong SM so the request gets lost. Consumers can be improved if they examine the return code and respond to EAGAIN properly but even without an improvement the situation is not getting worse. Signed-off-by: Moni Levy <monil@voltaire.com> Signed-off-by: Moni Shoua <monis@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-15 14:48:43 +08:00
unsigned long flags;
struct ib_sa_device *sa_dev =
container_of(handler, typeof(*sa_dev), event_handler);
struct ib_sa_port *port =
&sa_dev->port[event->element.port_num - sa_dev->start_port];
IB/Verbs: Use management helper rdma_cap_ib_sa() Introduce helper rdma_cap_ib_sa() to help us check if the port of an IB device support Infiniband Subnet Administration. Signed-off-by: Michael Wang <yun.wang@profitbricks.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Tested-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-05 20:50:36 +08:00
if (WARN_ON(!rdma_cap_ib_sa(handler->device, port->port_num)))
IB/mad: IBoE supports only QP1 (no QP0) Since IBoE is using Ethernet as its link layer, there is no central management entity so there is need for QP0. QP1 is still needed since it handles communications between CM agents. This patch will skip QP0 and create only QP1 for IBoE ports. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-09-28 08:51:11 +08:00
return;
IB/sa: Fail requests made while creating new SM AH This patch solves a race that occurs after an event occurs that causes the SA query module to flush its SM address handle (AH). When SM AH becomes invalid and needs an update it is handled by the global workqueue. On the other hand this event is also handled in the IPoIB driver by queuing work in the ipoib_workqueue that does multicast joins. Although queuing is in the right order, it is done to 2 different workqueues and so there is no guarantee that the first to be queued is the first to be executed. This causes a problem because IPoIB may end up sending an request to the old SM, which will take a long time to time out (since the old SM is gone); this leads to a much longer than necessary interruption in multicast traffer. The patch sets the SA query module's SM AH to NULL when the event occurs, and until update_sm_ah() is done, any request that needs sm_ah fails with -EAGAIN return status. For consumers, the patch doesn't make things worse. Before the patch, MADs are sent to the wrong SM so the request gets lost. Consumers can be improved if they examine the return code and respond to EAGAIN properly but even without an improvement the situation is not getting worse. Signed-off-by: Moni Levy <monil@voltaire.com> Signed-off-by: Moni Shoua <monis@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-15 14:48:43 +08:00
spin_lock_irqsave(&port->ah_lock, flags);
if (port->sm_ah)
kref_put(&port->sm_ah->ref, free_sm_ah);
port->sm_ah = NULL;
spin_unlock_irqrestore(&port->ah_lock, flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
RDMA: Update workqueue usage * ib_wq is added, which is used as the common workqueue for infiniband instead of the system workqueue. All system workqueue usages including flush_scheduled_work() callers are converted to use and flush ib_wq. * cancel_delayed_work() + flush_scheduled_work() converted to cancel_delayed_work_sync(). * qib_wq is removed and ib_wq is used instead. This is to prepare for deprecation of flush_scheduled_work(). Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-19 23:24:36 +08:00
queue_work(ib_wq, &sa_dev->port[event->element.port_num -
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
sa_dev->start_port].update_task);
}
}
IB/sa: Require SA registration Require users to register with SA module, to prevent the sa_query module text from going away while an SA query callback is still running. Update all in-tree users for the new interface. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-22 07:40:12 +08:00
void ib_sa_register_client(struct ib_sa_client *client)
{
atomic_set(&client->users, 1);
init_completion(&client->comp);
}
EXPORT_SYMBOL(ib_sa_register_client);
void ib_sa_unregister_client(struct ib_sa_client *client)
{
ib_sa_client_put(client);
wait_for_completion(&client->comp);
}
EXPORT_SYMBOL(ib_sa_unregister_client);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/**
* ib_sa_cancel_query - try to cancel an SA query
* @id:ID of query to cancel
* @query:query pointer to cancel
*
* Try to cancel an SA query. If the id and query don't match up or
* the query has already completed, nothing is done. Otherwise the
* query is canceled and will complete with a status of -EINTR.
*/
void ib_sa_cancel_query(int id, struct ib_sa_query *query)
{
unsigned long flags;
struct ib_mad_agent *agent;
[IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-26 01:51:39 +08:00
struct ib_mad_send_buf *mad_buf;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
spin_lock_irqsave(&idr_lock, flags);
if (idr_find(&query_idr, id) != query) {
spin_unlock_irqrestore(&idr_lock, flags);
return;
}
agent = query->port->agent;
[IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-26 01:51:39 +08:00
mad_buf = query->mad_buf;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
spin_unlock_irqrestore(&idr_lock, flags);
[IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-26 01:51:39 +08:00
ib_cancel_mad(agent, mad_buf);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
EXPORT_SYMBOL(ib_sa_cancel_query);
IB/sa: Set src_path_bits correctly in ib_init_ah_from_path() src_path_bits needs to mask off the base LID value. Signed-off-by: Sean Hefty <sean.hefty@intel.com>
2007-04-06 01:51:10 +08:00
static u8 get_src_path_mask(struct ib_device *device, u8 port_num)
{
struct ib_sa_device *sa_dev;
struct ib_sa_port *port;
unsigned long flags;
u8 src_path_mask;
sa_dev = ib_get_client_data(device, &sa_client);
if (!sa_dev)
return 0x7f;
port = &sa_dev->port[port_num - sa_dev->start_port];
spin_lock_irqsave(&port->ah_lock, flags);
src_path_mask = port->sm_ah ? port->sm_ah->src_path_mask : 0x7f;
spin_unlock_irqrestore(&port->ah_lock, flags);
return src_path_mask;
}
IB/sa: Add ib_init_ah_from_path() Add a call to initialize address handle attributes given a path record. This is used by the CM, and would be useful for users of UD QPs. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-18 11:37:39 +08:00
int ib_init_ah_from_path(struct ib_device *device, u8 port_num,
struct ib_sa_path_rec *rec, struct ib_ah_attr *ah_attr)
{
int ret;
u16 gid_index;
RDMA/cm: Add RDMA CM support for IBoE devices Add support for IBoE device binding and IP --> GID resolution. Path resolving and multicast joining are implemented within cma.c by filling in the responses and running callbacks in the CMA work queue. IP --> GID resolution always yields IPv6 link local addresses; remote GIDs are derived from the destination MAC address of the remote port. Multicast GIDs are always mapped to multicast MACs as is done in IPv6. (IPv4 multicast is enabled by translating IPv4 multicast addresses to IPv6 multicast as described in <http://www.mail-archive.com/ipng@sunroof.eng.sun.com/msg02134.html>.) Some helper functions are added to ib_addr.h. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-14 03:26:51 +08:00
int force_grh;
IB/sa: Add ib_init_ah_from_path() Add a call to initialize address handle attributes given a path record. This is used by the CM, and would be useful for users of UD QPs. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-18 11:37:39 +08:00
memset(ah_attr, 0, sizeof *ah_attr);
ah_attr->dlid = be16_to_cpu(rec->dlid);
ah_attr->sl = rec->sl;
IB/sa: Set src_path_bits correctly in ib_init_ah_from_path() src_path_bits needs to mask off the base LID value. Signed-off-by: Sean Hefty <sean.hefty@intel.com>
2007-04-06 01:51:10 +08:00
ah_attr->src_path_bits = be16_to_cpu(rec->slid) &
get_src_path_mask(device, port_num);
IB/sa: Add ib_init_ah_from_path() Add a call to initialize address handle attributes given a path record. This is used by the CM, and would be useful for users of UD QPs. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-18 11:37:39 +08:00
ah_attr->port_num = port_num;
IB/core: Set static rate in ib_init_ah_from_path() The static rate from the path record should be put into the address vector -- a long time ago the rate in the address attributes needed to be a relative rate, which required more munging, but now that the conversion from absolute to relative is done in the low-level driver, it's easy for ib_init_ah_from_path() to put the absolute rate in. Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-17 07:31:24 +08:00
ah_attr->static_rate = rec->rate;
IB/sa: Add ib_init_ah_from_path() Add a call to initialize address handle attributes given a path record. This is used by the CM, and would be useful for users of UD QPs. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-18 11:37:39 +08:00
IB/Verbs: Use management helper rdma_cap_eth_ah() Introduce helper rdma_cap_eth_ah() to help us check if the port of an IB device support Ethernet Address Handler. Signed-off-by: Michael Wang <yun.wang@profitbricks.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Tested-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-05 20:50:40 +08:00
force_grh = rdma_cap_eth_ah(device, port_num);
RDMA/cm: Add RDMA CM support for IBoE devices Add support for IBoE device binding and IP --> GID resolution. Path resolving and multicast joining are implemented within cma.c by filling in the responses and running callbacks in the CMA work queue. IP --> GID resolution always yields IPv6 link local addresses; remote GIDs are derived from the destination MAC address of the remote port. Multicast GIDs are always mapped to multicast MACs as is done in IPv6. (IPv4 multicast is enabled by translating IPv4 multicast addresses to IPv6 multicast as described in <http://www.mail-archive.com/ipng@sunroof.eng.sun.com/msg02134.html>.) Some helper functions are added to ib_addr.h. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-14 03:26:51 +08:00
if (rec->hop_limit > 1 || force_grh) {
IB/sa: Add ib_init_ah_from_path() Add a call to initialize address handle attributes given a path record. This is used by the CM, and would be useful for users of UD QPs. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-18 11:37:39 +08:00
ah_attr->ah_flags = IB_AH_GRH;
ah_attr->grh.dgid = rec->dgid;
ret = ib_find_cached_gid(device, &rec->sgid, &port_num,
&gid_index);
if (ret)
return ret;
IB/cm: Use address handle helpers Use new ib_init_ah_from_wc() and ib_init_ah_from_path() helper functions to clean up the IB CM. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-18 11:37:40 +08:00
ah_attr->grh.sgid_index = gid_index;
ah_attr->grh.flow_label = be32_to_cpu(rec->flow_label);
ah_attr->grh.hop_limit = rec->hop_limit;
IB/sa: Add ib_init_ah_from_path() Add a call to initialize address handle attributes given a path record. This is used by the CM, and would be useful for users of UD QPs. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-18 11:37:39 +08:00
ah_attr->grh.traffic_class = rec->traffic_class;
}
IB/core: Ethernet L2 attributes in verbs/cm structures This patch add the support for Ethernet L2 attributes in the verbs/cm/cma structures. When dealing with L2 Ethernet, we should use smac, dmac, vlan ID and priority in a similar manner that the IB L2 (and the L4 PKEY) attributes are used. Thus, those attributes were added to the following structures: * ib_ah_attr - added dmac * ib_qp_attr - added smac and vlan_id, (sl remains vlan priority) * ib_wc - added smac, vlan_id * ib_sa_path_rec - added smac, dmac, vlan_id * cm_av - added smac and vlan_id For the path record structure, extra care was taken to avoid the new fields when packing it into wire format, so we don't break the IB CM and SA wire protocol. On the active side, the CM fills. its internal structures from the path provided by the ULP. We add there taking the ETH L2 attributes and placing them into the CM Address Handle (struct cm_av). On the passive side, the CM fills its internal structures from the WC associated with the REQ message. We add there taking the ETH L2 attributes from the WC. When the HW driver provides the required ETH L2 attributes in the WC, they set the IB_WC_WITH_SMAC and IB_WC_WITH_VLAN flags. The IB core code checks for the presence of these flags, and in their absence does address resolution from the ib_init_ah_from_wc() helper function. ib_modify_qp_is_ok is also updated to consider the link layer. Some parameters are mandatory for Ethernet link layer, while they are irrelevant for IB. Vendor drivers are modified to support the new function signature. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-12-13 00:03:11 +08:00
if (force_grh) {
memcpy(ah_attr->dmac, rec->dmac, ETH_ALEN);
ah_attr->vlan_id = rec->vlan_id;
} else {
ah_attr->vlan_id = 0xffff;
}
IB/sa: Add ib_init_ah_from_path() Add a call to initialize address handle attributes given a path record. This is used by the CM, and would be useful for users of UD QPs. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-06-18 11:37:39 +08:00
return 0;
}
EXPORT_SYMBOL(ib_init_ah_from_path);
IB/sa: Make sure SA queries use default P_Key MADs sent to the SA should use the the default P_Key (0x7fff/0xffff). There's no requirement that the default P_Key is stored at index 0 in the local P_Key table, so add code to the sa_query module to look up the index of the default P_Key when creating an address handle for the SA (which is done any time the P_Key table might change), and use this index for all SA queries. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-19 02:03:58 +08:00
static int alloc_mad(struct ib_sa_query *query, gfp_t gfp_mask)
{
unsigned long flags;
spin_lock_irqsave(&query->port->ah_lock, flags);
IB/sa: Fail requests made while creating new SM AH This patch solves a race that occurs after an event occurs that causes the SA query module to flush its SM address handle (AH). When SM AH becomes invalid and needs an update it is handled by the global workqueue. On the other hand this event is also handled in the IPoIB driver by queuing work in the ipoib_workqueue that does multicast joins. Although queuing is in the right order, it is done to 2 different workqueues and so there is no guarantee that the first to be queued is the first to be executed. This causes a problem because IPoIB may end up sending an request to the old SM, which will take a long time to time out (since the old SM is gone); this leads to a much longer than necessary interruption in multicast traffer. The patch sets the SA query module's SM AH to NULL when the event occurs, and until update_sm_ah() is done, any request that needs sm_ah fails with -EAGAIN return status. For consumers, the patch doesn't make things worse. Before the patch, MADs are sent to the wrong SM so the request gets lost. Consumers can be improved if they examine the return code and respond to EAGAIN properly but even without an improvement the situation is not getting worse. Signed-off-by: Moni Levy <monil@voltaire.com> Signed-off-by: Moni Shoua <monis@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-07-15 14:48:43 +08:00
if (!query->port->sm_ah) {
spin_unlock_irqrestore(&query->port->ah_lock, flags);
return -EAGAIN;
}
IB/sa: Make sure SA queries use default P_Key MADs sent to the SA should use the the default P_Key (0x7fff/0xffff). There's no requirement that the default P_Key is stored at index 0 in the local P_Key table, so add code to the sa_query module to look up the index of the default P_Key when creating an address handle for the SA (which is done any time the P_Key table might change), and use this index for all SA queries. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-19 02:03:58 +08:00
kref_get(&query->port->sm_ah->ref);
query->sm_ah = query->port->sm_ah;
spin_unlock_irqrestore(&query->port->ah_lock, flags);
query->mad_buf = ib_create_send_mad(query->port->agent, 1,
query->sm_ah->pkey_index,
0, IB_MGMT_SA_HDR, IB_MGMT_SA_DATA,
gfp_mask);
IB/sa: Error handling thinko fix ib_create_send_mad() returns an error code pointer on error, not NULL. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-09-09 19:55:11 +08:00
if (IS_ERR(query->mad_buf)) {
IB/sa: Make sure SA queries use default P_Key MADs sent to the SA should use the the default P_Key (0x7fff/0xffff). There's no requirement that the default P_Key is stored at index 0 in the local P_Key table, so add code to the sa_query module to look up the index of the default P_Key when creating an address handle for the SA (which is done any time the P_Key table might change), and use this index for all SA queries. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-19 02:03:58 +08:00
kref_put(&query->sm_ah->ref, free_sm_ah);
return -ENOMEM;
}
query->mad_buf->ah = query->sm_ah->ah;
return 0;
}
static void free_mad(struct ib_sa_query *query)
{
ib_free_send_mad(query->mad_buf);
kref_put(&query->sm_ah->ref, free_sm_ah);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static void init_mad(struct ib_sa_mad *mad, struct ib_mad_agent *agent)
{
unsigned long flags;
memset(mad, 0, sizeof *mad);
mad->mad_hdr.base_version = IB_MGMT_BASE_VERSION;
mad->mad_hdr.mgmt_class = IB_MGMT_CLASS_SUBN_ADM;
mad->mad_hdr.class_version = IB_SA_CLASS_VERSION;
spin_lock_irqsave(&tid_lock, flags);
mad->mad_hdr.tid =
cpu_to_be64(((u64) agent->hi_tid) << 32 | tid++);
spin_unlock_irqrestore(&tid_lock, flags);
}
[PATCH] IB/core: use correct gfp_mask in sa_query Avoid bogus out of memory errors: fix sa_query to actually pass gfp_mask supplied by the user to idr_pre_get. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Acked-by: "Sean Hefty" <mshefty@ichips.intel.com> Acked-by: "Roland Dreier" <rdreier@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-14 15:23:56 +08:00
static int send_mad(struct ib_sa_query *query, int timeout_ms, gfp_t gfp_mask)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
IB/mad: Fix sparse warning about gfp_t use Properly convert gfp_t & result to bool to fix: drivers/infiniband/core/sa_query.c:621:33: warning: incorrect type in initializer (different base types) drivers/infiniband/core/sa_query.c:621:33: expected bool [unsigned] [usertype] preload drivers/infiniband/core/sa_query.c:621:33: got restricted gfp_t Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-06-04 01:24:24 +08:00
bool preload = !!(gfp_mask & __GFP_WAIT);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
unsigned long flags;
[IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-26 01:51:39 +08:00
int ret, id;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
IB/core: convert to idr_alloc() Convert to the much saner new idr interface. v2: Mike triggered WARN_ON() in idr_preload() because send_mad(), which may be used from non-process context, was calling idr_preload() unconditionally. Preload iff @gfp_mask has __GFP_WAIT. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Reported-by: "Marciniszyn, Mike" <mike.marciniszyn@intel.com> Cc: Roland Dreier <roland@kernel.org> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28 09:04:16 +08:00
if (preload)
idr_preload(gfp_mask);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
spin_lock_irqsave(&idr_lock, flags);
IB/core: convert to idr_alloc() Convert to the much saner new idr interface. v2: Mike triggered WARN_ON() in idr_preload() because send_mad(), which may be used from non-process context, was calling idr_preload() unconditionally. Preload iff @gfp_mask has __GFP_WAIT. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Reported-by: "Marciniszyn, Mike" <mike.marciniszyn@intel.com> Cc: Roland Dreier <roland@kernel.org> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28 09:04:16 +08:00
id = idr_alloc(&query_idr, query, 0, 0, GFP_NOWAIT);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
spin_unlock_irqrestore(&idr_lock, flags);
IB/core: convert to idr_alloc() Convert to the much saner new idr interface. v2: Mike triggered WARN_ON() in idr_preload() because send_mad(), which may be used from non-process context, was calling idr_preload() unconditionally. Preload iff @gfp_mask has __GFP_WAIT. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Reported-by: "Marciniszyn, Mike" <mike.marciniszyn@intel.com> Cc: Roland Dreier <roland@kernel.org> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28 09:04:16 +08:00
if (preload)
idr_preload_end();
if (id < 0)
return id;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-26 01:51:39 +08:00
query->mad_buf->timeout_ms = timeout_ms;
query->mad_buf->context[0] = query;
query->id = id;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-26 01:51:39 +08:00
ret = ib_post_send_mad(query->mad_buf, NULL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (ret) {
spin_lock_irqsave(&idr_lock, flags);
[IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-26 01:51:39 +08:00
idr_remove(&query_idr, id);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
spin_unlock_irqrestore(&idr_lock, flags);
}
[PATCH] IB: Fix race in sa_query Use a copy of the id we'll return to the consumer so that we don't dereference query->sa_query after calling send_mad(). A completion may occur very quickly and end up freeing the query before we get to do anything after send_mad(). Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 05:36:46 +08:00
/*
* It's not safe to dereference query any more, because the
* send may already have completed and freed the query in
[IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-26 01:51:39 +08:00
* another context.
[PATCH] IB: Fix race in sa_query Use a copy of the id we'll return to the consumer so that we don't dereference query->sa_query after calling send_mad(). A completion may occur very quickly and end up freeing the query before we get to do anything after send_mad(). Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 05:36:46 +08:00
*/
[IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-26 01:51:39 +08:00
return ret ? ret : id;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
RDMA/ucma: Add option to manually set IB path Export rdma_set_ib_paths to user space to allow applications to manually set the IB path used for connections. This allows alternative ways for a user space application or library to obtain path record information, including retrieving path information from cached data, avoiding direct interaction with the IB SA. The IB SA is a single, centralized entity that can limit scaling on large clusters running MPI applications. Future changes to the rdma cm can expand on this framework to support the full range of features allowed by the IB CM, such as separate forward and reverse paths and APM. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Reviewed-By: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-11-17 01:30:33 +08:00
void ib_sa_unpack_path(void *attribute, struct ib_sa_path_rec *rec)
{
ib_unpack(path_rec_table, ARRAY_SIZE(path_rec_table), attribute, rec);
}
EXPORT_SYMBOL(ib_sa_unpack_path);
IB/sa: Export function to pack a path record into wire format Allow converting from struct ib_sa_path_rec to the IB defined SA path record wire format. This will be used to report path data from the rdma cm into user space. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-05-30 01:09:26 +08:00
void ib_sa_pack_path(struct ib_sa_path_rec *rec, void *attribute)
{
ib_pack(path_rec_table, ARRAY_SIZE(path_rec_table), rec, attribute);
}
EXPORT_SYMBOL(ib_sa_pack_path);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static void ib_sa_path_rec_callback(struct ib_sa_query *sa_query,
int status,
struct ib_sa_mad *mad)
{
struct ib_sa_path_query *query =
container_of(sa_query, struct ib_sa_path_query, sa_query);
if (mad) {
struct ib_sa_path_rec rec;
ib_unpack(path_rec_table, ARRAY_SIZE(path_rec_table),
mad->data, &rec);
IB/core: Ethernet L2 attributes in verbs/cm structures This patch add the support for Ethernet L2 attributes in the verbs/cm/cma structures. When dealing with L2 Ethernet, we should use smac, dmac, vlan ID and priority in a similar manner that the IB L2 (and the L4 PKEY) attributes are used. Thus, those attributes were added to the following structures: * ib_ah_attr - added dmac * ib_qp_attr - added smac and vlan_id, (sl remains vlan priority) * ib_wc - added smac, vlan_id * ib_sa_path_rec - added smac, dmac, vlan_id * cm_av - added smac and vlan_id For the path record structure, extra care was taken to avoid the new fields when packing it into wire format, so we don't break the IB CM and SA wire protocol. On the active side, the CM fills. its internal structures from the path provided by the ULP. We add there taking the ETH L2 attributes and placing them into the CM Address Handle (struct cm_av). On the passive side, the CM fills its internal structures from the WC associated with the REQ message. We add there taking the ETH L2 attributes from the WC. When the HW driver provides the required ETH L2 attributes in the WC, they set the IB_WC_WITH_SMAC and IB_WC_WITH_VLAN flags. The IB core code checks for the presence of these flags, and in their absence does address resolution from the ib_init_ah_from_wc() helper function. ib_modify_qp_is_ok is also updated to consider the link layer. Some parameters are mandatory for Ethernet link layer, while they are irrelevant for IB. Vendor drivers are modified to support the new function signature. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-12-13 00:03:11 +08:00
rec.vlan_id = 0xffff;
memset(rec.dmac, 0, ETH_ALEN);
memset(rec.smac, 0, ETH_ALEN);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
query->callback(status, &rec, query->context);
} else
query->callback(status, NULL, query->context);
}
static void ib_sa_path_rec_release(struct ib_sa_query *sa_query)
{
kfree(container_of(sa_query, struct ib_sa_path_query, sa_query));
}
/**
* ib_sa_path_rec_get - Start a Path get query
IB/sa: Require SA registration Require users to register with SA module, to prevent the sa_query module text from going away while an SA query callback is still running. Update all in-tree users for the new interface. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-22 07:40:12 +08:00
* @client:SA client
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* @device:device to send query on
* @port_num: port number to send query on
* @rec:Path Record to send in query
* @comp_mask:component mask to send in query
* @timeout_ms:time to wait for response
* @gfp_mask:GFP mask to use for internal allocations
* @callback:function called when query completes, times out or is
* canceled
* @context:opaque user context passed to callback
* @sa_query:query context, used to cancel query
*
* Send a Path Record Get query to the SA to look up a path. The
* callback function will be called when the query completes (or
* fails); status is 0 for a successful response, -EINTR if the query
* is canceled, -ETIMEDOUT is the query timed out, or -EIO if an error
* occurred sending the query. The resp parameter of the callback is
* only valid if status is 0.
*
* If the return value of ib_sa_path_rec_get() is negative, it is an
* error code. Otherwise it is a query ID that can be used to cancel
* the query.
*/
IB/sa: Require SA registration Require users to register with SA module, to prevent the sa_query module text from going away while an SA query callback is still running. Update all in-tree users for the new interface. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-22 07:40:12 +08:00
int ib_sa_path_rec_get(struct ib_sa_client *client,
struct ib_device *device, u8 port_num,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
struct ib_sa_path_rec *rec,
ib_sa_comp_mask comp_mask,
[PATCH] gfp flags annotations - part 1 - added typedef unsigned int __nocast gfp_t; - replaced __nocast uses for gfp flags with gfp_t - it gives exactly the same warnings as far as sparse is concerned, doesn't change generated code (from gcc point of view we replaced unsigned int with typedef) and documents what's going on far better. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-07 14:46:04 +08:00
int timeout_ms, gfp_t gfp_mask,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
void (*callback)(int status,
struct ib_sa_path_rec *resp,
void *context),
void *context,
struct ib_sa_query **sa_query)
{
struct ib_sa_path_query *query;
struct ib_sa_device *sa_dev = ib_get_client_data(device, &sa_client);
[IB] fail SA queries if device initialization failed If the SA query module's initialization fails for a device, then that device won't have a struct ib_sa_device associated. We should fail SA queries in that case, rather than blindly dereferencing the NULL pointer we get back from ib_get_client_data(). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-14 01:45:02 +08:00
struct ib_sa_port *port;
struct ib_mad_agent *agent;
[IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-26 01:51:39 +08:00
struct ib_sa_mad *mad;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
int ret;
[IB] fail SA queries if device initialization failed If the SA query module's initialization fails for a device, then that device won't have a struct ib_sa_device associated. We should fail SA queries in that case, rather than blindly dereferencing the NULL pointer we get back from ib_get_client_data(). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-14 01:45:02 +08:00
if (!sa_dev)
return -ENODEV;
port = &sa_dev->port[port_num - sa_dev->start_port];
agent = port->agent;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
query = kmalloc(sizeof *query, gfp_mask);
if (!query)
return -ENOMEM;
[IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-26 01:51:39 +08:00
IB/sa: Make sure SA queries use default P_Key MADs sent to the SA should use the the default P_Key (0x7fff/0xffff). There's no requirement that the default P_Key is stored at index 0 in the local P_Key table, so add code to the sa_query module to look up the index of the default P_Key when creating an address handle for the SA (which is done any time the P_Key table might change), and use this index for all SA queries. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-19 02:03:58 +08:00
query->sa_query.port = port;
ret = alloc_mad(&query->sa_query, gfp_mask);
if (ret)
[IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-26 01:51:39 +08:00
goto err1;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
IB/sa: Require SA registration Require users to register with SA module, to prevent the sa_query module text from going away while an SA query callback is still running. Update all in-tree users for the new interface. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-22 07:40:12 +08:00
ib_sa_client_get(client);
query->sa_query.client = client;
query->callback = callback;
query->context = context;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-26 01:51:39 +08:00
mad = query->sa_query.mad_buf->mad;
init_mad(mad, agent);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-26 01:51:39 +08:00
query->sa_query.callback = callback ? ib_sa_path_rec_callback : NULL;
query->sa_query.release = ib_sa_path_rec_release;
mad->mad_hdr.method = IB_MGMT_METHOD_GET;
mad->mad_hdr.attr_id = cpu_to_be16(IB_SA_ATTR_PATH_REC);
mad->sa_hdr.comp_mask = comp_mask;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-26 01:51:39 +08:00
ib_pack(path_rec_table, ARRAY_SIZE(path_rec_table), rec, mad->data);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*sa_query = &query->sa_query;
[PATCH] IB: Fix race in sa_query Use a copy of the id we'll return to the consumer so that we don't dereference query->sa_query after calling send_mad(). A completion may occur very quickly and end up freeing the query before we get to do anything after send_mad(). Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 05:36:46 +08:00
[PATCH] IB/core: use correct gfp_mask in sa_query Avoid bogus out of memory errors: fix sa_query to actually pass gfp_mask supplied by the user to idr_pre_get. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Acked-by: "Sean Hefty" <mshefty@ichips.intel.com> Acked-by: "Roland Dreier" <rdreier@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-14 15:23:56 +08:00
ret = send_mad(&query->sa_query, timeout_ms, gfp_mask);
[IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-26 01:51:39 +08:00
if (ret < 0)
goto err2;
return ret;
err2:
*sa_query = NULL;
IB/sa: Require SA registration Require users to register with SA module, to prevent the sa_query module text from going away while an SA query callback is still running. Update all in-tree users for the new interface. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-22 07:40:12 +08:00
ib_sa_client_put(query->sa_query.client);
IB/sa: Make sure SA queries use default P_Key MADs sent to the SA should use the the default P_Key (0x7fff/0xffff). There's no requirement that the default P_Key is stored at index 0 in the local P_Key table, so add code to the sa_query module to look up the index of the default P_Key when creating an address handle for the SA (which is done any time the P_Key table might change), and use this index for all SA queries. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-19 02:03:58 +08:00
free_mad(&query->sa_query);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-26 01:51:39 +08:00
err1:
kfree(query);
[PATCH] IB: Fix race in sa_query Use a copy of the id we'll return to the consumer so that we don't dereference query->sa_query after calling send_mad(). A completion may occur very quickly and end up freeing the query before we get to do anything after send_mad(). Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 05:36:46 +08:00
return ret;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
EXPORT_SYMBOL(ib_sa_path_rec_get);
[PATCH] IB: Add Service Record support to SA client Add Service Record support to SA client Signed-off-by: Hal Rosenstock <halr@voltaire.com> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28 02:45:38 +08:00
static void ib_sa_service_rec_callback(struct ib_sa_query *sa_query,
int status,
struct ib_sa_mad *mad)
{
struct ib_sa_service_query *query =
container_of(sa_query, struct ib_sa_service_query, sa_query);
if (mad) {
struct ib_sa_service_rec rec;
ib_unpack(service_rec_table, ARRAY_SIZE(service_rec_table),
mad->data, &rec);
query->callback(status, &rec, query->context);
} else
query->callback(status, NULL, query->context);
}
static void ib_sa_service_rec_release(struct ib_sa_query *sa_query)
{
kfree(container_of(sa_query, struct ib_sa_service_query, sa_query));
}
/**
* ib_sa_service_rec_query - Start Service Record operation
IB/sa: Require SA registration Require users to register with SA module, to prevent the sa_query module text from going away while an SA query callback is still running. Update all in-tree users for the new interface. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-22 07:40:12 +08:00
* @client:SA client
[PATCH] IB: Add Service Record support to SA client Add Service Record support to SA client Signed-off-by: Hal Rosenstock <halr@voltaire.com> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28 02:45:38 +08:00
* @device:device to send request on
* @port_num: port number to send request on
* @method:SA method - should be get, set, or delete
* @rec:Service Record to send in request
* @comp_mask:component mask to send in request
* @timeout_ms:time to wait for response
* @gfp_mask:GFP mask to use for internal allocations
* @callback:function called when request completes, times out or is
* canceled
* @context:opaque user context passed to callback
* @sa_query:request context, used to cancel request
*
* Send a Service Record set/get/delete to the SA to register,
* unregister or query a service record.
* The callback function will be called when the request completes (or
* fails); status is 0 for a successful response, -EINTR if the query
* is canceled, -ETIMEDOUT is the query timed out, or -EIO if an error
* occurred sending the query. The resp parameter of the callback is
* only valid if status is 0.
*
* If the return value of ib_sa_service_rec_query() is negative, it is an
* error code. Otherwise it is a request ID that can be used to cancel
* the query.
*/
IB/sa: Require SA registration Require users to register with SA module, to prevent the sa_query module text from going away while an SA query callback is still running. Update all in-tree users for the new interface. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-22 07:40:12 +08:00
int ib_sa_service_rec_query(struct ib_sa_client *client,
struct ib_device *device, u8 port_num, u8 method,
[PATCH] IB: Add Service Record support to SA client Add Service Record support to SA client Signed-off-by: Hal Rosenstock <halr@voltaire.com> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28 02:45:38 +08:00
struct ib_sa_service_rec *rec,
ib_sa_comp_mask comp_mask,
[PATCH] gfp flags annotations - part 1 - added typedef unsigned int __nocast gfp_t; - replaced __nocast uses for gfp flags with gfp_t - it gives exactly the same warnings as far as sparse is concerned, doesn't change generated code (from gcc point of view we replaced unsigned int with typedef) and documents what's going on far better. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-07 14:46:04 +08:00
int timeout_ms, gfp_t gfp_mask,
[PATCH] IB: Add Service Record support to SA client Add Service Record support to SA client Signed-off-by: Hal Rosenstock <halr@voltaire.com> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28 02:45:38 +08:00
void (*callback)(int status,
struct ib_sa_service_rec *resp,
void *context),
void *context,
struct ib_sa_query **sa_query)
{
struct ib_sa_service_query *query;
struct ib_sa_device *sa_dev = ib_get_client_data(device, &sa_client);
[IB] fail SA queries if device initialization failed If the SA query module's initialization fails for a device, then that device won't have a struct ib_sa_device associated. We should fail SA queries in that case, rather than blindly dereferencing the NULL pointer we get back from ib_get_client_data(). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-14 01:45:02 +08:00
struct ib_sa_port *port;
struct ib_mad_agent *agent;
[IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-26 01:51:39 +08:00
struct ib_sa_mad *mad;
[PATCH] IB: Add Service Record support to SA client Add Service Record support to SA client Signed-off-by: Hal Rosenstock <halr@voltaire.com> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28 02:45:38 +08:00
int ret;
[IB] fail SA queries if device initialization failed If the SA query module's initialization fails for a device, then that device won't have a struct ib_sa_device associated. We should fail SA queries in that case, rather than blindly dereferencing the NULL pointer we get back from ib_get_client_data(). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-14 01:45:02 +08:00
if (!sa_dev)
return -ENODEV;
port = &sa_dev->port[port_num - sa_dev->start_port];
agent = port->agent;
[PATCH] IB: Add Service Record support to SA client Add Service Record support to SA client Signed-off-by: Hal Rosenstock <halr@voltaire.com> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28 02:45:38 +08:00
if (method != IB_MGMT_METHOD_GET &&
method != IB_MGMT_METHOD_SET &&
method != IB_SA_METHOD_DELETE)
return -EINVAL;
query = kmalloc(sizeof *query, gfp_mask);
if (!query)
return -ENOMEM;
[IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-26 01:51:39 +08:00
IB/sa: Make sure SA queries use default P_Key MADs sent to the SA should use the the default P_Key (0x7fff/0xffff). There's no requirement that the default P_Key is stored at index 0 in the local P_Key table, so add code to the sa_query module to look up the index of the default P_Key when creating an address handle for the SA (which is done any time the P_Key table might change), and use this index for all SA queries. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-19 02:03:58 +08:00
query->sa_query.port = port;
ret = alloc_mad(&query->sa_query, gfp_mask);
if (ret)
[IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-26 01:51:39 +08:00
goto err1;
[PATCH] IB: Add Service Record support to SA client Add Service Record support to SA client Signed-off-by: Hal Rosenstock <halr@voltaire.com> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28 02:45:38 +08:00
IB/sa: Require SA registration Require users to register with SA module, to prevent the sa_query module text from going away while an SA query callback is still running. Update all in-tree users for the new interface. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-22 07:40:12 +08:00
ib_sa_client_get(client);
query->sa_query.client = client;
query->callback = callback;
query->context = context;
[PATCH] IB: Add Service Record support to SA client Add Service Record support to SA client Signed-off-by: Hal Rosenstock <halr@voltaire.com> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28 02:45:38 +08:00
[IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-26 01:51:39 +08:00
mad = query->sa_query.mad_buf->mad;
init_mad(mad, agent);
[PATCH] IB: Add Service Record support to SA client Add Service Record support to SA client Signed-off-by: Hal Rosenstock <halr@voltaire.com> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28 02:45:38 +08:00
[IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-26 01:51:39 +08:00
query->sa_query.callback = callback ? ib_sa_service_rec_callback : NULL;
query->sa_query.release = ib_sa_service_rec_release;
mad->mad_hdr.method = method;
mad->mad_hdr.attr_id = cpu_to_be16(IB_SA_ATTR_SERVICE_REC);
mad->sa_hdr.comp_mask = comp_mask;
[PATCH] IB: Add Service Record support to SA client Add Service Record support to SA client Signed-off-by: Hal Rosenstock <halr@voltaire.com> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28 02:45:38 +08:00
ib_pack(service_rec_table, ARRAY_SIZE(service_rec_table),
[IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-26 01:51:39 +08:00
rec, mad->data);
[PATCH] IB: Add Service Record support to SA client Add Service Record support to SA client Signed-off-by: Hal Rosenstock <halr@voltaire.com> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28 02:45:38 +08:00
*sa_query = &query->sa_query;
[PATCH] IB/core: use correct gfp_mask in sa_query Avoid bogus out of memory errors: fix sa_query to actually pass gfp_mask supplied by the user to idr_pre_get. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Acked-by: "Sean Hefty" <mshefty@ichips.intel.com> Acked-by: "Roland Dreier" <rdreier@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-14 15:23:56 +08:00
ret = send_mad(&query->sa_query, timeout_ms, gfp_mask);
[IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-26 01:51:39 +08:00
if (ret < 0)
goto err2;
return ret;
[PATCH] IB: Add Service Record support to SA client Add Service Record support to SA client Signed-off-by: Hal Rosenstock <halr@voltaire.com> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28 02:45:38 +08:00
[IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-26 01:51:39 +08:00
err2:
*sa_query = NULL;
IB/sa: Require SA registration Require users to register with SA module, to prevent the sa_query module text from going away while an SA query callback is still running. Update all in-tree users for the new interface. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-22 07:40:12 +08:00
ib_sa_client_put(query->sa_query.client);
IB/sa: Make sure SA queries use default P_Key MADs sent to the SA should use the the default P_Key (0x7fff/0xffff). There's no requirement that the default P_Key is stored at index 0 in the local P_Key table, so add code to the sa_query module to look up the index of the default P_Key when creating an address handle for the SA (which is done any time the P_Key table might change), and use this index for all SA queries. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-19 02:03:58 +08:00
free_mad(&query->sa_query);
[IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-26 01:51:39 +08:00
err1:
kfree(query);
[PATCH] IB: Add Service Record support to SA client Add Service Record support to SA client Signed-off-by: Hal Rosenstock <halr@voltaire.com> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28 02:45:38 +08:00
return ret;
}
EXPORT_SYMBOL(ib_sa_service_rec_query);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static void ib_sa_mcmember_rec_callback(struct ib_sa_query *sa_query,
int status,
struct ib_sa_mad *mad)
{
struct ib_sa_mcmember_query *query =
container_of(sa_query, struct ib_sa_mcmember_query, sa_query);
if (mad) {
struct ib_sa_mcmember_rec rec;
ib_unpack(mcmember_rec_table, ARRAY_SIZE(mcmember_rec_table),
mad->data, &rec);
query->callback(status, &rec, query->context);
} else
query->callback(status, NULL, query->context);
}
static void ib_sa_mcmember_rec_release(struct ib_sa_query *sa_query)
{
kfree(container_of(sa_query, struct ib_sa_mcmember_query, sa_query));
}
IB/sa: Require SA registration Require users to register with SA module, to prevent the sa_query module text from going away while an SA query callback is still running. Update all in-tree users for the new interface. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-22 07:40:12 +08:00
int ib_sa_mcmember_rec_query(struct ib_sa_client *client,
struct ib_device *device, u8 port_num,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
u8 method,
struct ib_sa_mcmember_rec *rec,
ib_sa_comp_mask comp_mask,
[PATCH] gfp flags annotations - part 1 - added typedef unsigned int __nocast gfp_t; - replaced __nocast uses for gfp flags with gfp_t - it gives exactly the same warnings as far as sparse is concerned, doesn't change generated code (from gcc point of view we replaced unsigned int with typedef) and documents what's going on far better. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-07 14:46:04 +08:00
int timeout_ms, gfp_t gfp_mask,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
void (*callback)(int status,
struct ib_sa_mcmember_rec *resp,
void *context),
void *context,
struct ib_sa_query **sa_query)
{
struct ib_sa_mcmember_query *query;
struct ib_sa_device *sa_dev = ib_get_client_data(device, &sa_client);
[IB] fail SA queries if device initialization failed If the SA query module's initialization fails for a device, then that device won't have a struct ib_sa_device associated. We should fail SA queries in that case, rather than blindly dereferencing the NULL pointer we get back from ib_get_client_data(). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-14 01:45:02 +08:00
struct ib_sa_port *port;
struct ib_mad_agent *agent;
[IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-26 01:51:39 +08:00
struct ib_sa_mad *mad;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
int ret;
[IB] fail SA queries if device initialization failed If the SA query module's initialization fails for a device, then that device won't have a struct ib_sa_device associated. We should fail SA queries in that case, rather than blindly dereferencing the NULL pointer we get back from ib_get_client_data(). Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-14 01:45:02 +08:00
if (!sa_dev)
return -ENODEV;
port = &sa_dev->port[port_num - sa_dev->start_port];
agent = port->agent;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
query = kmalloc(sizeof *query, gfp_mask);
if (!query)
return -ENOMEM;
[IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-26 01:51:39 +08:00
IB/sa: Make sure SA queries use default P_Key MADs sent to the SA should use the the default P_Key (0x7fff/0xffff). There's no requirement that the default P_Key is stored at index 0 in the local P_Key table, so add code to the sa_query module to look up the index of the default P_Key when creating an address handle for the SA (which is done any time the P_Key table might change), and use this index for all SA queries. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-19 02:03:58 +08:00
query->sa_query.port = port;
ret = alloc_mad(&query->sa_query, gfp_mask);
if (ret)
[IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-26 01:51:39 +08:00
goto err1;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
IB/sa: Require SA registration Require users to register with SA module, to prevent the sa_query module text from going away while an SA query callback is still running. Update all in-tree users for the new interface. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-22 07:40:12 +08:00
ib_sa_client_get(client);
query->sa_query.client = client;
query->callback = callback;
query->context = context;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-26 01:51:39 +08:00
mad = query->sa_query.mad_buf->mad;
init_mad(mad, agent);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-26 01:51:39 +08:00
query->sa_query.callback = callback ? ib_sa_mcmember_rec_callback : NULL;
query->sa_query.release = ib_sa_mcmember_rec_release;
mad->mad_hdr.method = method;
mad->mad_hdr.attr_id = cpu_to_be16(IB_SA_ATTR_MC_MEMBER_REC);
mad->sa_hdr.comp_mask = comp_mask;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ib_pack(mcmember_rec_table, ARRAY_SIZE(mcmember_rec_table),
[IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-26 01:51:39 +08:00
rec, mad->data);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*sa_query = &query->sa_query;
[PATCH] IB: Fix race in sa_query Use a copy of the id we'll return to the consumer so that we don't dereference query->sa_query after calling send_mad(). A completion may occur very quickly and end up freeing the query before we get to do anything after send_mad(). Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 05:36:46 +08:00
[PATCH] IB/core: use correct gfp_mask in sa_query Avoid bogus out of memory errors: fix sa_query to actually pass gfp_mask supplied by the user to idr_pre_get. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Acked-by: "Sean Hefty" <mshefty@ichips.intel.com> Acked-by: "Roland Dreier" <rdreier@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-14 15:23:56 +08:00
ret = send_mad(&query->sa_query, timeout_ms, gfp_mask);
[IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-26 01:51:39 +08:00
if (ret < 0)
goto err2;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] IB: Fix race in sa_query Use a copy of the id we'll return to the consumer so that we don't dereference query->sa_query after calling send_mad(). A completion may occur very quickly and end up freeing the query before we get to do anything after send_mad(). Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 05:36:46 +08:00
return ret;
[IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-26 01:51:39 +08:00
err2:
*sa_query = NULL;
IB/sa: Require SA registration Require users to register with SA module, to prevent the sa_query module text from going away while an SA query callback is still running. Update all in-tree users for the new interface. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-22 07:40:12 +08:00
ib_sa_client_put(query->sa_query.client);
IB/sa: Make sure SA queries use default P_Key MADs sent to the SA should use the the default P_Key (0x7fff/0xffff). There's no requirement that the default P_Key is stored at index 0 in the local P_Key table, so add code to the sa_query module to look up the index of the default P_Key when creating an address handle for the SA (which is done any time the P_Key table might change), and use this index for all SA queries. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-19 02:03:58 +08:00
free_mad(&query->sa_query);
[IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-26 01:51:39 +08:00
err1:
kfree(query);
return ret;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
IB/sa: Add GuidInfoRecord query support This query is needed for SRIOV alias GUID support. The query is implemented per the IB Spec definition in section 15.2.5.18 (GuidInfoRecord). Signed-off-by: Erez Shitrit <erezsh@mellanox.co.il> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-06-19 16:21:38 +08:00
/* Support GuidInfoRecord */
static void ib_sa_guidinfo_rec_callback(struct ib_sa_query *sa_query,
int status,
struct ib_sa_mad *mad)
{
struct ib_sa_guidinfo_query *query =
container_of(sa_query, struct ib_sa_guidinfo_query, sa_query);
if (mad) {
struct ib_sa_guidinfo_rec rec;
ib_unpack(guidinfo_rec_table, ARRAY_SIZE(guidinfo_rec_table),
mad->data, &rec);
query->callback(status, &rec, query->context);
} else
query->callback(status, NULL, query->context);
}
static void ib_sa_guidinfo_rec_release(struct ib_sa_query *sa_query)
{
kfree(container_of(sa_query, struct ib_sa_guidinfo_query, sa_query));
}
int ib_sa_guid_info_rec_query(struct ib_sa_client *client,
struct ib_device *device, u8 port_num,
struct ib_sa_guidinfo_rec *rec,
ib_sa_comp_mask comp_mask, u8 method,
int timeout_ms, gfp_t gfp_mask,
void (*callback)(int status,
struct ib_sa_guidinfo_rec *resp,
void *context),
void *context,
struct ib_sa_query **sa_query)
{
struct ib_sa_guidinfo_query *query;
struct ib_sa_device *sa_dev = ib_get_client_data(device, &sa_client);
struct ib_sa_port *port;
struct ib_mad_agent *agent;
struct ib_sa_mad *mad;
int ret;
if (!sa_dev)
return -ENODEV;
if (method != IB_MGMT_METHOD_GET &&
method != IB_MGMT_METHOD_SET &&
method != IB_SA_METHOD_DELETE) {
return -EINVAL;
}
port = &sa_dev->port[port_num - sa_dev->start_port];
agent = port->agent;
query = kmalloc(sizeof *query, gfp_mask);
if (!query)
return -ENOMEM;
query->sa_query.port = port;
ret = alloc_mad(&query->sa_query, gfp_mask);
if (ret)
goto err1;
ib_sa_client_get(client);
query->sa_query.client = client;
query->callback = callback;
query->context = context;
mad = query->sa_query.mad_buf->mad;
init_mad(mad, agent);
query->sa_query.callback = callback ? ib_sa_guidinfo_rec_callback : NULL;
query->sa_query.release = ib_sa_guidinfo_rec_release;
mad->mad_hdr.method = method;
mad->mad_hdr.attr_id = cpu_to_be16(IB_SA_ATTR_GUID_INFO_REC);
mad->sa_hdr.comp_mask = comp_mask;
ib_pack(guidinfo_rec_table, ARRAY_SIZE(guidinfo_rec_table), rec,
mad->data);
*sa_query = &query->sa_query;
ret = send_mad(&query->sa_query, timeout_ms, gfp_mask);
if (ret < 0)
goto err2;
return ret;
err2:
*sa_query = NULL;
ib_sa_client_put(query->sa_query.client);
free_mad(&query->sa_query);
err1:
kfree(query);
return ret;
}
EXPORT_SYMBOL(ib_sa_guid_info_rec_query);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static void send_handler(struct ib_mad_agent *agent,
struct ib_mad_send_wc *mad_send_wc)
{
[IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-26 01:51:39 +08:00
struct ib_sa_query *query = mad_send_wc->send_buf->context[0];
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
unsigned long flags;
[PATCH] IB: allow NULL sa_query callbacks Check if a client passes a NULL callback into an SA query, and if so, never call back. This fixes an oops if someone unloads ib_ipoib and ib_sa in rapid succession. ib_ipoib does an MCMember delete with a NULL callback and 0 timeout on unload, which is usually fine since the delete completes successfully. However, if ib_sa is unloaded immediately afterwards, the delete will be canceled and ib_sa will try to call the (now already unloaded) ib_ipoib module back with the cancel completion, which triggers the oops. Signed-off-by: Roland Dreier <roland@topspin.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-26 03:31:29 +08:00
if (query->callback)
switch (mad_send_wc->status) {
case IB_WC_SUCCESS:
/* No callback -- already got recv */
break;
case IB_WC_RESP_TIMEOUT_ERR:
query->callback(query, -ETIMEDOUT, NULL);
break;
case IB_WC_WR_FLUSH_ERR:
query->callback(query, -EINTR, NULL);
break;
default:
query->callback(query, -EIO, NULL);
break;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
spin_lock_irqsave(&idr_lock, flags);
[IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-26 01:51:39 +08:00
idr_remove(&query_idr, query->id);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
spin_unlock_irqrestore(&idr_lock, flags);
[IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-26 01:51:39 +08:00
IB/sa: Make sure SA queries use default P_Key MADs sent to the SA should use the the default P_Key (0x7fff/0xffff). There's no requirement that the default P_Key is stored at index 0 in the local P_Key table, so add code to the sa_query module to look up the index of the default P_Key when creating an address handle for the SA (which is done any time the P_Key table might change), and use this index for all SA queries. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-06-19 02:03:58 +08:00
free_mad(query);
IB/sa: Require SA registration Require users to register with SA module, to prevent the sa_query module text from going away while an SA query callback is still running. Update all in-tree users for the new interface. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-22 07:40:12 +08:00
ib_sa_client_put(query->client);
[IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-26 01:51:39 +08:00
query->release(query);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
static void recv_handler(struct ib_mad_agent *mad_agent,
struct ib_mad_recv_wc *mad_recv_wc)
{
struct ib_sa_query *query;
[IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-26 01:51:39 +08:00
struct ib_mad_send_buf *mad_buf;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-26 01:51:39 +08:00
mad_buf = (void *) (unsigned long) mad_recv_wc->wc->wr_id;
query = mad_buf->context[0];
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[IB] Fix MAD layer DMA mappings to avoid touching data buffer once mapped The MAD layer was violating the DMA API by touching data buffers used for sends after the DMA mapping was done. This causes problems on non-cache-coherent architectures, because the device doing DMA won't see updates to the payload buffers that exist only in the CPU cache. Fix this by having all MAD consumers use ib_create_send_mad() to allocate their send buffers, and moving the DMA mapping into the MAD layer so it can be done just before calling send (and after any modifications of the send buffer by the MAD layer). Tested on a non-cache-coherent PowerPC 440SPe system. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-26 01:51:39 +08:00
if (query->callback) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (mad_recv_wc->wc->status == IB_WC_SUCCESS)
query->callback(query,
mad_recv_wc->recv_buf.mad->mad_hdr.status ?
-EINVAL : 0,
(struct ib_sa_mad *) mad_recv_wc->recv_buf.mad);
else
query->callback(query, -EIO, NULL);
}
ib_free_recv_mad(mad_recv_wc);
}
static void ib_sa_add_one(struct ib_device *device)
{
struct ib_sa_device *sa_dev;
int s, e, i;
IB/Verbs: Reform IB-core sa_query Use raw management helpers to reform IB-core sa_query. Signed-off-by: Michael Wang <yun.wang@profitbricks.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Tested-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-05 20:50:22 +08:00
int count = 0;
RDMA: iWARP Core Changes. Modifications to the existing rdma header files, core files, drivers, and ulp files to support iWARP, including: - Hook iWARP CM into the build system and use it in rdma_cm. - Convert enum ib_node_type to enum rdma_node_type, which includes the possibility of RDMA_NODE_RNIC, and update everything for this. Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-08-04 05:02:42 +08:00
if (device->node_type == RDMA_NODE_IB_SWITCH)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
s = e = 0;
else {
s = 1;
e = device->phys_port_cnt;
}
IB/mad: IBoE supports only QP1 (no QP0) Since IBoE is using Ethernet as its link layer, there is no central management entity so there is need for QP0. QP1 is still needed since it handles communications between CM agents. This patch will skip QP0 and create only QP1 for IBoE ports. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-09-28 08:51:11 +08:00
sa_dev = kzalloc(sizeof *sa_dev +
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
(e - s + 1) * sizeof (struct ib_sa_port),
GFP_KERNEL);
if (!sa_dev)
return;
sa_dev->start_port = s;
sa_dev->end_port = e;
for (i = 0; i <= e - s; ++i) {
IB/mad: IBoE supports only QP1 (no QP0) Since IBoE is using Ethernet as its link layer, there is no central management entity so there is need for QP0. QP1 is still needed since it handles communications between CM agents. This patch will skip QP0 and create only QP1 for IBoE ports. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-09-28 08:51:11 +08:00
spin_lock_init(&sa_dev->port[i].ah_lock);
IB/Verbs: Use management helper rdma_cap_ib_sa() Introduce helper rdma_cap_ib_sa() to help us check if the port of an IB device support Infiniband Subnet Administration. Signed-off-by: Michael Wang <yun.wang@profitbricks.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Tested-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-05 20:50:36 +08:00
if (!rdma_cap_ib_sa(device, i + 1))
IB/mad: IBoE supports only QP1 (no QP0) Since IBoE is using Ethernet as its link layer, there is no central management entity so there is need for QP0. QP1 is still needed since it handles communications between CM agents. This patch will skip QP0 and create only QP1 for IBoE ports. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-09-28 08:51:11 +08:00
continue;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
sa_dev->port[i].sm_ah = NULL;
sa_dev->port[i].port_num = i + s;
sa_dev->port[i].agent =
ib_register_mad_agent(device, i + s, IB_QPT_GSI,
NULL, 0, send_handler,
IB/mad: add new ioctl to ABI to support new registration options Registrations options are specified through flags. Definitions of flags will be in subsequent patches. Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-08-09 07:00:55 +08:00
recv_handler, sa_dev, 0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (IS_ERR(sa_dev->port[i].agent))
goto err;
WorkStruct: make allyesconfig Fix up for make allyesconfig. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-11-22 22:57:56 +08:00
INIT_WORK(&sa_dev->port[i].update_task, update_sm_ah);
IB/Verbs: Reform IB-core sa_query Use raw management helpers to reform IB-core sa_query. Signed-off-by: Michael Wang <yun.wang@profitbricks.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Tested-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-05 20:50:22 +08:00
count++;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
IB/Verbs: Reform IB-core sa_query Use raw management helpers to reform IB-core sa_query. Signed-off-by: Michael Wang <yun.wang@profitbricks.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Tested-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-05 20:50:22 +08:00
if (!count)
goto free;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ib_set_client_data(device, &sa_client, sa_dev);
/*
* We register our event handler after everything is set up,
* and then update our cached info after the event handler is
* registered to avoid any problems if a port changes state
* during our initialization.
*/
INIT_IB_EVENT_HANDLER(&sa_dev->event_handler, device, ib_sa_event);
if (ib_register_event_handler(&sa_dev->event_handler))
goto err;
IB/Verbs: Reform IB-core sa_query Use raw management helpers to reform IB-core sa_query. Signed-off-by: Michael Wang <yun.wang@profitbricks.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Tested-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-05 20:50:22 +08:00
for (i = 0; i <= e - s; ++i) {
IB/Verbs: Use management helper rdma_cap_ib_sa() Introduce helper rdma_cap_ib_sa() to help us check if the port of an IB device support Infiniband Subnet Administration. Signed-off-by: Michael Wang <yun.wang@profitbricks.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Tested-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-05 20:50:36 +08:00
if (rdma_cap_ib_sa(device, i + 1))
IB/mad: IBoE supports only QP1 (no QP0) Since IBoE is using Ethernet as its link layer, there is no central management entity so there is need for QP0. QP1 is still needed since it handles communications between CM agents. This patch will skip QP0 and create only QP1 for IBoE ports. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-09-28 08:51:11 +08:00
update_sm_ah(&sa_dev->port[i].update_task);
IB/Verbs: Reform IB-core sa_query Use raw management helpers to reform IB-core sa_query. Signed-off-by: Michael Wang <yun.wang@profitbricks.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Tested-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-05 20:50:22 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return;
err:
IB/Verbs: Reform IB-core sa_query Use raw management helpers to reform IB-core sa_query. Signed-off-by: Michael Wang <yun.wang@profitbricks.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Tested-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-05 20:50:22 +08:00
while (--i >= 0) {
IB/Verbs: Use management helper rdma_cap_ib_sa() Introduce helper rdma_cap_ib_sa() to help us check if the port of an IB device support Infiniband Subnet Administration. Signed-off-by: Michael Wang <yun.wang@profitbricks.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Tested-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-05 20:50:36 +08:00
if (rdma_cap_ib_sa(device, i + 1))
IB/mad: IBoE supports only QP1 (no QP0) Since IBoE is using Ethernet as its link layer, there is no central management entity so there is need for QP0. QP1 is still needed since it handles communications between CM agents. This patch will skip QP0 and create only QP1 for IBoE ports. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-09-28 08:51:11 +08:00
ib_unregister_mad_agent(sa_dev->port[i].agent);
IB/Verbs: Reform IB-core sa_query Use raw management helpers to reform IB-core sa_query. Signed-off-by: Michael Wang <yun.wang@profitbricks.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Tested-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-05 20:50:22 +08:00
}
free:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
kfree(sa_dev);
return;
}
static void ib_sa_remove_one(struct ib_device *device)
{
struct ib_sa_device *sa_dev = ib_get_client_data(device, &sa_client);
int i;
if (!sa_dev)
return;
ib_unregister_event_handler(&sa_dev->event_handler);
RDMA: Update missed conversion of flush_scheduled_work() Commit f06267104dd9 ("RDMA: Update workqueue usage") introduced ib_wq and removed the use of flush_scheduled_work(); however, during the merge process one chunk was lost in ib_sa_remove_one(). Fix it. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-01-24 19:06:54 +08:00
flush_workqueue(ib_wq);
IB/sa_query: Flush scheduled work before unloading module sa_query schedules work on IB asynchronous events. After unregistering the async event handler, make sure that this work has completed before releasing the IB device (and possibly allowing the sa_query module text to go away). Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2006-01-18 01:53:51 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
for (i = 0; i <= sa_dev->end_port - sa_dev->start_port; ++i) {
IB/Verbs: Use management helper rdma_cap_ib_sa() Introduce helper rdma_cap_ib_sa() to help us check if the port of an IB device support Infiniband Subnet Administration. Signed-off-by: Michael Wang <yun.wang@profitbricks.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Tested-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Sean Hefty <sean.hefty@intel.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-05-05 20:50:36 +08:00
if (rdma_cap_ib_sa(device, i + 1)) {
IB/mad: IBoE supports only QP1 (no QP0) Since IBoE is using Ethernet as its link layer, there is no central management entity so there is need for QP0. QP1 is still needed since it handles communications between CM agents. This patch will skip QP0 and create only QP1 for IBoE ports. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-09-28 08:51:11 +08:00
ib_unregister_mad_agent(sa_dev->port[i].agent);
if (sa_dev->port[i].sm_ah)
kref_put(&sa_dev->port[i].sm_ah->ref, free_sm_ah);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
kfree(sa_dev);
}
static int __init ib_sa_init(void)
{
int ret;
get_random_bytes(&tid, sizeof tid);
ret = ib_register_client(&sa_client);
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
if (ret) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
printk(KERN_ERR "Couldn't register ib_sa client\n");
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
goto err1;
}
ret = mcast_init();
if (ret) {
printk(KERN_ERR "Couldn't initialize multicast handling\n");
goto err2;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
return 0;
err2:
ib_unregister_client(&sa_client);
err1:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return ret;
}
static void __exit ib_sa_cleanup(void)
{
IB/sa: Track multicast join/leave requests The IB SA tracks multicast join/leave requests on a per port basis and does not do any reference counting: if two users of the same port join the same group, and one leaves that group, then the SA will remove the port from the group even though there is one user who wants to stay a member left. Therefore, in order to support multiple users of the same multicast group from the same port, we need to perform reference counting locally. To do this, add an multicast submodule to ib_sa to perform reference counting of multicast join/leave operations. Modify ib_ipoib (the only in-kernel user of multicast) to use the new interface. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-02-16 09:00:17 +08:00
mcast_cleanup();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ib_unregister_client(&sa_client);
[IB] Add idr_destroy() calls on module unload Add idr_destroy() calls to the module_exit() functions of the four IB driver modules that use idrs, so we don't leak idr_layer_cache objects when these modules are unloaded. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-10-25 01:53:25 +08:00
idr_destroy(&query_idr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
module_init(ib_sa_init);
module_exit(ib_sa_cleanup);