hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
linux-sg2042/fs/ceph/file.c

1731 lines
43 KiB
C
Raw Normal View History

ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
#include <linux/ceph/ceph_debug.h>
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
#include <linux/module.h>
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
#include <linux/sched.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
#include <linux/file.h>
ceph: simplify+fix atomic_open The initial ->atomic_open op was carried over from the old intent code, which was incomplete and didn't really work. Replace it with a fresh method. In particular: * always attempt to do an atomic open+lookup, both for the create case and for lookups of existing files. * fix symlink handling by returning 1 to the VFS so that we can follow the link to its destination. This fixes a longstanding ceph bug (#2392). Signed-off-by: Sage Weil <sage@inktank.com>
2012-08-01 02:27:36 +08:00
#include <linux/mount.h>
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
#include <linux/namei.h>
#include <linux/writeback.h>
ceph: punch hole support This patch implements fallocate and punch hole support for Ceph kernel client. Signed-off-by: Li Wang <liwang@ubuntukylin.com> Signed-off-by: Yunchuan Wen <yunchuanwen@ubuntukylin.com>
2013-08-15 11:51:44 +08:00
#include <linux/falloc.h>
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
#include "super.h"
#include "mds_client.h"
ceph: use fscache as a local presisent cache Adding support for fscache to the Ceph filesystem. This would bring it to on par with some of the other network filesystems in Linux (like NFS, AFS, etc...) In order to mount the filesystem with fscache the 'fsc' mount option must be passed. Signed-off-by: Milosz Tanski <milosz@adfin.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-08-22 05:29:54 +08:00
#include "cache.h"
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
ceph: fix file open flags on ppc64 The file open flags (O_foo) are platform specific and should never go out to an interface that is not local to the system. Unfortunately these flags have leaked out onto the wire in the cephfs implementation. That lead to bogus flags getting transmitted on ppc64. This patch converts the kernel view of flags to the ceph view of file open flags. Fixes: 124e68e74 ("ceph: file operations") Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-04-28 00:34:00 +08:00
static __le32 ceph_flags_sys2wire(u32 flags)
{
u32 wire_flags = 0;
switch (flags & O_ACCMODE) {
case O_RDONLY:
wire_flags |= CEPH_O_RDONLY;
break;
case O_WRONLY:
wire_flags |= CEPH_O_WRONLY;
break;
case O_RDWR:
wire_flags |= CEPH_O_RDWR;
break;
}
#define ceph_sys2wire(a) if (flags & a) { wire_flags |= CEPH_##a; flags &= ~a; }
ceph_sys2wire(O_CREAT);
ceph_sys2wire(O_EXCL);
ceph_sys2wire(O_TRUNC);
ceph_sys2wire(O_DIRECTORY);
ceph_sys2wire(O_NOFOLLOW);
#undef ceph_sys2wire
if (flags)
dout("unused open flags: %x", flags);
return cpu_to_le32(wire_flags);
}
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
/*
* Ceph file operations
*
* Implement basic open/close functionality, and implement
* read/write.
*
* We implement three modes of file I/O:
* - buffered uses the generic_file_aio_{read,write} helpers
*
* - synchronous is used when there is multi-client read/write
* sharing, avoids the page cache, and synchronously waits for an
* ack from the OSD.
*
* - direct io takes the variant of the sync path that references
* user pages directly.
*
* fsync() flushes and waits on dirty pages, but just queues metadata
* for writeback: since the MDS can recover size and mtime there is no
* need to wait for MDS acknowledgement.
*/
ceph: combine as many iovec as possile into one OSD request Both ceph_sync_direct_write and ceph_sync_read iterate iovec elements one by one, send one OSD request for each iovec. This is sub-optimal, We can combine serveral iovec into one page vector, and send an OSD request for the whole page vector. Signed-off-by: Zhu, Caifeng <zhucaifeng@unissoft-nj.com> Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-10-08 15:26:15 +08:00
/*
* Calculate the length sum of direct io vectors that can
* be combined into one page vector.
*/
static size_t dio_get_pagev_size(const struct iov_iter *it)
{
const struct iovec *iov = it->iov;
const struct iovec *iovend = iov + it->nr_segs;
size_t size;
size = iov->iov_len - it->iov_offset;
/*
* An iov can be page vectored when both the current tail
* and the next base are page aligned.
*/
while (PAGE_ALIGNED((iov->iov_base + iov->iov_len)) &&
(++iov < iovend && PAGE_ALIGNED((iov->iov_base)))) {
size += iov->iov_len;
}
dout("dio_get_pagevlen len = %zu\n", size);
return size;
}
/*
* Allocate a page vector based on (@it, @nbytes).
* The return value is the tuple describing a page vector,
* that is (@pages, @page_align, @num_pages).
*/
static struct page **
dio_get_pages_alloc(const struct iov_iter *it, size_t nbytes,
size_t *page_align, int *num_pages)
{
struct iov_iter tmp_it = *it;
size_t align;
struct page **pages;
int ret = 0, idx, npages;
align = (unsigned long)(it->iov->iov_base + it->iov_offset) &
(PAGE_SIZE - 1);
npages = calc_pages_for(align, nbytes);
treewide: use kv[mz]alloc* rather than opencoded variants There are many code paths opencoding kvmalloc. Let's use the helper instead. The main difference to kvmalloc is that those users are usually not considering all the aspects of the memory allocator. E.g. allocation requests <= 32kB (with 4kB pages) are basically never failing and invoke OOM killer to satisfy the allocation. This sounds too disruptive for something that has a reasonable fallback - the vmalloc. On the other hand those requests might fallback to vmalloc even when the memory allocator would succeed after several more reclaim/compaction attempts previously. There is no guarantee something like that happens though. This patch converts many of those places to kv[mz]alloc* helpers because they are more conservative. Link: http://lkml.kernel.org/r/20170306103327.2766-2-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> # Xen bits Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Andreas Dilger <andreas.dilger@intel.com> # Lustre Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> # KVM/s390 Acked-by: Dan Williams <dan.j.williams@intel.com> # nvdim Acked-by: David Sterba <dsterba@suse.com> # btrfs Acked-by: Ilya Dryomov <idryomov@gmail.com> # Ceph Acked-by: Tariq Toukan <tariqt@mellanox.com> # mlx4 Acked-by: Leon Romanovsky <leonro@mellanox.com> # mlx5 Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Tony Luck <tony.luck@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Santosh Raspatur <santosh@chelsio.com> Cc: Hariprasad S <hariprasad@chelsio.com> Cc: Yishai Hadas <yishaih@mellanox.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: "Yan, Zheng" <zyan@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-09 06:57:27 +08:00
pages = kvmalloc(sizeof(*pages) * npages, GFP_KERNEL);
if (!pages)
return ERR_PTR(-ENOMEM);
ceph: combine as many iovec as possile into one OSD request Both ceph_sync_direct_write and ceph_sync_read iterate iovec elements one by one, send one OSD request for each iovec. This is sub-optimal, We can combine serveral iovec into one page vector, and send an OSD request for the whole page vector. Signed-off-by: Zhu, Caifeng <zhucaifeng@unissoft-nj.com> Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-10-08 15:26:15 +08:00
for (idx = 0; idx < npages; ) {
size_t start;
ret = iov_iter_get_pages(&tmp_it, pages + idx, nbytes,
npages - idx, &start);
if (ret < 0)
goto fail;
iov_iter_advance(&tmp_it, ret);
nbytes -= ret;
idx += (ret + start + PAGE_SIZE - 1) / PAGE_SIZE;
}
BUG_ON(nbytes != 0);
*num_pages = npages;
*page_align = align;
dout("dio_get_pages_alloc: got %d pages align %zu\n", npages, align);
return pages;
fail:
ceph_put_page_vector(pages, idx, false);
return ERR_PTR(ret);
}
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
/*
* Prepare an open request. Preallocate ceph_cap to avoid an
* inopportune ENOMEM later.
*/
static struct ceph_mds_request *
prepare_open_request(struct super_block *sb, int flags, int create_mode)
{
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
struct ceph_fs_client *fsc = ceph_sb_to_client(sb);
struct ceph_mds_client *mdsc = fsc->mdsc;
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
struct ceph_mds_request *req;
int want_auth = USE_ANY_MDS;
int op = (flags & O_CREAT) ? CEPH_MDS_OP_CREATE : CEPH_MDS_OP_OPEN;
if (flags & (O_WRONLY|O_RDWR|O_CREAT|O_TRUNC))
want_auth = USE_AUTH_MDS;
req = ceph_mdsc_create_request(mdsc, op, want_auth);
if (IS_ERR(req))
goto out;
req->r_fmode = ceph_flags_to_mode(flags);
ceph: fix file open flags on ppc64 The file open flags (O_foo) are platform specific and should never go out to an interface that is not local to the system. Unfortunately these flags have leaked out onto the wire in the cephfs implementation. That lead to bogus flags getting transmitted on ppc64. This patch converts the kernel view of flags to the ceph view of file open flags. Fixes: 124e68e74 ("ceph: file operations") Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-04-28 00:34:00 +08:00
req->r_args.open.flags = ceph_flags_sys2wire(flags);
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
req->r_args.open.mode = cpu_to_le32(create_mode);
out:
return req;
}
/*
* initialize private struct file data.
* if we fail, clean up by dropping fmode reference on the ceph_inode
*/
static int ceph_init_file(struct inode *inode, struct file *file, int fmode)
{
struct ceph_file_info *cf;
int ret = 0;
switch (inode->i_mode & S_IFMT) {
case S_IFREG:
ceph: disable fscache when inode is opened for write All other filesystems do not add dirty pages to fscache. They all disable fscache when inode is opened for write. Only ceph adds dirty pages to fscache, but the code is buggy. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-05-18 15:25:03 +08:00
ceph_fscache_register_inode_cookie(inode);
ceph_fscache_file_set_cookie(inode, file);
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
case S_IFDIR:
dout("init_file %p %p 0%o (regular)\n", inode, file,
inode->i_mode);
ceph: use kmem_cache_zalloc Use kmem_cache_zalloc() instead of kmem_cache_alloc() with flag GFP_ZERO. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-03-13 15:26:29 +08:00
cf = kmem_cache_zalloc(ceph_file_cachep, GFP_KERNEL);
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
if (cf == NULL) {
ceph_put_fmode(ceph_inode(inode), fmode); /* clean up */
return -ENOMEM;
}
cf->fmode = fmode;
cf->next_offset = 2;
ceph: rework dcache readdir Previously our dcache readdir code relies on that child dentries in directory dentry's d_subdir list are sorted by dentry's offset in descending order. When adding dentries to the dcache, if a dentry already exists, our readdir code moves it to head of directory dentry's d_subdir list. This design relies on dcache internals. Al Viro suggests using ncpfs's approach: keeping array of pointers to dentries in page cache of directory inode. the validity of those pointers are presented by directory inode's complete and ordered flags. When a dentry gets pruned, we clear directory inode's complete flag in the d_prune() callback. Before moving a dentry to other directory, we clear the ordered flag for both old and new directory. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-06-16 20:48:56 +08:00
cf->readdir_cache_idx = -1;
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
file->private_data = cf;
BUG_ON(inode->i_fop->release != ceph_release);
break;
case S_IFLNK:
dout("init_file %p %p 0%o (symlink)\n", inode, file,
inode->i_mode);
ceph_put_fmode(ceph_inode(inode), fmode); /* clean up */
break;
default:
dout("init_file %p %p 0%o (special)\n", inode, file,
inode->i_mode);
/*
* we need to drop the open ref now, since we don't
* have .release set to ceph_release.
*/
ceph_put_fmode(ceph_inode(inode), fmode); /* clean up */
BUG_ON(inode->i_fop->release == ceph_release);
/* call the proper open fop */
ret = inode->i_fop->open(inode, file);
}
return ret;
}
ceph: renew caps for read/write if mds session got killed. When mds session gets killed, read/write operation may hang. Client waits for Frw caps, but mds does not know what caps client wants. To recover this, client sends an open request to mds. The request will tell mds what caps client wants. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-04-08 15:27:16 +08:00
/*
* try renew caps after session gets killed.
*/
int ceph_renew_caps(struct inode *inode)
{
struct ceph_mds_client *mdsc = ceph_sb_to_client(inode->i_sb)->mdsc;
struct ceph_inode_info *ci = ceph_inode(inode);
struct ceph_mds_request *req;
int err, flags, wanted;
spin_lock(&ci->i_ceph_lock);
wanted = __ceph_caps_file_wanted(ci);
if (__ceph_is_any_real_caps(ci) &&
ceph: fix wrong check in ceph_renew_caps() Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-03-25 17:28:10 +08:00
(!(wanted & CEPH_CAP_ANY_WR) || ci->i_auth_cap)) {
ceph: renew caps for read/write if mds session got killed. When mds session gets killed, read/write operation may hang. Client waits for Frw caps, but mds does not know what caps client wants. To recover this, client sends an open request to mds. The request will tell mds what caps client wants. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-04-08 15:27:16 +08:00
int issued = __ceph_caps_issued(ci, NULL);
spin_unlock(&ci->i_ceph_lock);
dout("renew caps %p want %s issued %s updating mds_wanted\n",
inode, ceph_cap_string(wanted), ceph_cap_string(issued));
ceph_check_caps(ci, 0, NULL);
return 0;
}
spin_unlock(&ci->i_ceph_lock);
flags = 0;
if ((wanted & CEPH_CAP_FILE_RD) && (wanted & CEPH_CAP_FILE_WR))
flags = O_RDWR;
else if (wanted & CEPH_CAP_FILE_RD)
flags = O_RDONLY;
else if (wanted & CEPH_CAP_FILE_WR)
flags = O_WRONLY;
#ifdef O_LAZY
if (wanted & CEPH_CAP_FILE_LAZYIO)
flags |= O_LAZY;
#endif
req = prepare_open_request(inode->i_sb, flags, 0);
if (IS_ERR(req)) {
err = PTR_ERR(req);
goto out;
}
req->r_inode = inode;
ihold(inode);
req->r_num_caps = 1;
req->r_fmode = -1;
err = ceph_mdsc_do_request(mdsc, NULL, req);
ceph_mdsc_put_request(req);
out:
dout("renew caps %p open result=%d\n", inode, err);
return err < 0 ? err : 0;
}
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
/*
* If we already have the requisite capabilities, we can satisfy
* the open request locally (no need to request new caps from the
* MDS). We do, however, need to inform the MDS (asynchronously)
* if our wanted caps set expands.
*/
int ceph_open(struct inode *inode, struct file *file)
{
struct ceph_inode_info *ci = ceph_inode(inode);
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
struct ceph_fs_client *fsc = ceph_sb_to_client(inode->i_sb);
struct ceph_mds_client *mdsc = fsc->mdsc;
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
struct ceph_mds_request *req;
struct ceph_file_info *cf = file->private_data;
int err;
int flags, fmode, wanted;
if (cf) {
dout("open file %p is already opened\n", file);
return 0;
}
/* filter out O_CREAT|O_EXCL; vfs did that already. yuck. */
flags = file->f_flags & ~(O_CREAT|O_EXCL);
if (S_ISDIR(inode->i_mode))
flags = O_DIRECTORY; /* mds likes to know */
dout("open inode %p ino %llx.%llx file %p flags %d (%d)\n", inode,
ceph_vinop(inode), file, flags, file->f_flags);
fmode = ceph_flags_to_mode(flags);
wanted = ceph_caps_for_mode(fmode);
/* snapped files are read-only */
if (ceph_snap(inode) != CEPH_NOSNAP && (file->f_mode & FMODE_WRITE))
return -EROFS;
/* trivially open snapdir */
if (ceph_snap(inode) == CEPH_SNAPDIR) {
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-12-01 01:47:09 +08:00
spin_lock(&ci->i_ceph_lock);
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
__ceph_get_fmode(ci, fmode);
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-12-01 01:47:09 +08:00
spin_unlock(&ci->i_ceph_lock);
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
return ceph_init_file(inode, file, fmode);
}
/*
ceph: fix open for write on clustered mds Normally when we open a file we already have a cap, and simply update the wanted set. However, if we open a file for write, but don't have an auth cap, that doesn't work; we need to open a new cap with the auth MDS. Only reuse existing caps if we are opening for read or the existing cap is auth. Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-08 01:07:15 +08:00
* No need to block if we have caps on the auth MDS (for
* write) or any MDS (for read). Update wanted set
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
* asynchronously.
*/
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-12-01 01:47:09 +08:00
spin_lock(&ci->i_ceph_lock);
ceph: fix open for write on clustered mds Normally when we open a file we already have a cap, and simply update the wanted set. However, if we open a file for write, but don't have an auth cap, that doesn't work; we need to open a new cap with the auth MDS. Only reuse existing caps if we are opening for read or the existing cap is auth. Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-08 01:07:15 +08:00
if (__ceph_is_any_real_caps(ci) &&
(((fmode & CEPH_FILE_MODE_WR) == 0) || ci->i_auth_cap)) {
ceph: avoid calling ceph_renew_caps() infinitely __ceph_caps_mds_wanted() ignores caps from stale session. So the return value of __ceph_caps_mds_wanted() can keep the same across ceph_renew_caps(). This causes try_get_cap_refs() to keep calling ceph_renew_caps(). The fix is ignore the session valid check for the try_get_cap_refs() case. If session is stale, just let the caps requester sleep. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2017-01-29 22:15:47 +08:00
int mds_wanted = __ceph_caps_mds_wanted(ci, true);
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
int issued = __ceph_caps_issued(ci, NULL);
dout("open %p fmode %d want %s issued %s using existing\n",
inode, fmode, ceph_cap_string(wanted),
ceph_cap_string(issued));
__ceph_get_fmode(ci, fmode);
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-12-01 01:47:09 +08:00
spin_unlock(&ci->i_ceph_lock);
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
/* adjust wanted? */
if ((issued & wanted) != wanted &&
(mds_wanted & wanted) != wanted &&
ceph_snap(inode) != CEPH_SNAPDIR)
ceph_check_caps(ci, 0, NULL);
return ceph_init_file(inode, file, fmode);
} else if (ceph_snap(inode) != CEPH_NOSNAP &&
(ci->i_snap_caps & wanted) == wanted) {
__ceph_get_fmode(ci, fmode);
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-12-01 01:47:09 +08:00
spin_unlock(&ci->i_ceph_lock);
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
return ceph_init_file(inode, file, fmode);
}
ceph: use fscache as a local presisent cache Adding support for fscache to the Ceph filesystem. This would bring it to on par with some of the other network filesystems in Linux (like NFS, AFS, etc...) In order to mount the filesystem with fscache the 'fsc' mount option must be passed. Signed-off-by: Milosz Tanski <milosz@adfin.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-08-22 05:29:54 +08:00
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-12-01 01:47:09 +08:00
spin_unlock(&ci->i_ceph_lock);
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
dout("open fmode %d wants %s\n", fmode, ceph_cap_string(wanted));
req = prepare_open_request(inode->i_sb, flags, 0);
if (IS_ERR(req)) {
err = PTR_ERR(req);
goto out;
}
ceph: use ihold when we already have an inode ref We should use ihold whenever we already have a stable inode ref, even when we aren't holding i_lock. This avoids adding new and unnecessary locking dependencies. Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-28 00:24:26 +08:00
req->r_inode = inode;
ihold(inode);
ceph: use fscache as a local presisent cache Adding support for fscache to the Ceph filesystem. This would bring it to on par with some of the other network filesystems in Linux (like NFS, AFS, etc...) In order to mount the filesystem with fscache the 'fsc' mount option must be passed. Signed-off-by: Milosz Tanski <milosz@adfin.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-08-22 05:29:54 +08:00
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
req->r_num_caps = 1;
ceph: no need to get parent inode in ceph_open parent inode is needed in creating new inode case. For ceph_open, the target inode already exists. Signed-off-by: Jianpeng Ma <jianpeng.ma@intel.com> Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-08-18 10:25:35 +08:00
err = ceph_mdsc_do_request(mdsc, NULL, req);
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
if (!err)
err = ceph_init_file(inode, file, req->r_fmode);
ceph_mdsc_put_request(req);
dout("open result=%d on %llx.%llx\n", err, ceph_vinop(inode));
out:
return err;
}
/*
ceph: simplify+fix atomic_open The initial ->atomic_open op was carried over from the old intent code, which was incomplete and didn't really work. Replace it with a fresh method. In particular: * always attempt to do an atomic open+lookup, both for the create case and for lookups of existing files. * fix symlink handling by returning 1 to the VFS so that we can follow the link to its destination. This fixes a longstanding ceph bug (#2392). Signed-off-by: Sage Weil <sage@inktank.com>
2012-08-01 02:27:36 +08:00
* Do a lookup + open with a single request. If we get a non-existent
* file or symlink, return 1 so the VFS can retry.
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
*/
ceph: simplify+fix atomic_open The initial ->atomic_open op was carried over from the old intent code, which was incomplete and didn't really work. Replace it with a fresh method. In particular: * always attempt to do an atomic open+lookup, both for the create case and for lookups of existing files. * fix symlink handling by returning 1 to the VFS so that we can follow the link to its destination. This fixes a longstanding ceph bug (#2392). Signed-off-by: Sage Weil <sage@inktank.com>
2012-08-01 02:27:36 +08:00
int ceph_atomic_open(struct inode *dir, struct dentry *dentry,
kill struct opendata Just pass struct file *. Methods are happier that way... There's no need to return struct file * from finish_open() now, so let it return int. Next: saner prototypes for parts in namei.c Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-22 16:40:19 +08:00
struct file *file, unsigned flags, umode_t mode,
make ->atomic_open() return int Change of calling conventions: old new NULL 1 file 0 ERR_PTR(-ve) -ve Caller *knows* that struct file *; no need to return it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-22 16:39:14 +08:00
int *opened)
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
{
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
struct ceph_fs_client *fsc = ceph_sb_to_client(dir->i_sb);
struct ceph_mds_client *mdsc = fsc->mdsc;
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
struct ceph_mds_request *req;
ceph: simplify+fix atomic_open The initial ->atomic_open op was carried over from the old intent code, which was incomplete and didn't really work. Replace it with a fresh method. In particular: * always attempt to do an atomic open+lookup, both for the create case and for lookups of existing files. * fix symlink handling by returning 1 to the VFS so that we can follow the link to its destination. This fixes a longstanding ceph bug (#2392). Signed-off-by: Sage Weil <sage@inktank.com>
2012-08-01 02:27:36 +08:00
struct dentry *dn;
ceph: include the initial ACL in create/mkdir/mknod MDS requests Current code set new file/directory's initial ACL in a non-atomic manner. Client first sends request to MDS to create new file/directory, then set the initial ACL after the new file/directory is successfully created. The fix is include the initial ACL in create/mkdir/mknod MDS requests. So MDS can handle creating file/directory and setting the initial ACL in one request. Signed-off-by: Yan, Zheng <zyan@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com>
2014-09-16 20:35:17 +08:00
struct ceph_acls_info acls = {};
ceph: fix security xattr deadlock When security is enabled, security module can call filesystem's getxattr/setxattr callbacks during d_instantiate(). For cephfs, d_instantiate() is usually called by MDS' dispatch thread, while handling MDS reply. If the MDS reply does not include xattrs and corresponding caps, getxattr/setxattr need to send a new request to MDS and waits for the reply. This makes MDS' dispatch sleep, nobody handles later MDS replies. The fix is make sure lookup/atomic_open reply include xattrs and corresponding caps. So getxattr can be handled by cached xattrs. This requires some modification to both MDS and request message. (Client tells MDS what caps it wants; MDS encodes proper caps in the reply) Smack security module may call setxattr during d_instantiate(). Unlike getxattr, we can't force MDS to issue CEPH_CAP_XATTR_EXCL to us. So just make setxattr return error when called by MDS' dispatch thread. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-03-07 10:34:50 +08:00
int mask;
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
int err;
assorted conversions to %p[dD] Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-10-22 08:11:25 +08:00
dout("atomic_open %p dentry %p '%pd' %s flags %d mode 0%o\n",
dir, dentry, dentry,
ceph: simplify+fix atomic_open The initial ->atomic_open op was carried over from the old intent code, which was incomplete and didn't really work. Replace it with a fresh method. In particular: * always attempt to do an atomic open+lookup, both for the create case and for lookups of existing files. * fix symlink handling by returning 1 to the VFS so that we can follow the link to its destination. This fixes a longstanding ceph bug (#2392). Signed-off-by: Sage Weil <sage@inktank.com>
2012-08-01 02:27:36 +08:00
d_unhashed(dentry) ? "unhashed" : "hashed", flags, mode);
if (dentry->d_name.len > NAME_MAX)
return -ENAMETOOLONG;
ceph: include the initial ACL in create/mkdir/mknod MDS requests Current code set new file/directory's initial ACL in a non-atomic manner. Client first sends request to MDS to create new file/directory, then set the initial ACL after the new file/directory is successfully created. The fix is include the initial ACL in create/mkdir/mknod MDS requests. So MDS can handle creating file/directory and setting the initial ACL in one request. Signed-off-by: Yan, Zheng <zyan@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com>
2014-09-16 20:35:17 +08:00
if (flags & O_CREAT) {
err = ceph_pre_init_acls(dir, &mode, &acls);
if (err < 0)
return err;
}
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
/* do the open */
req = prepare_open_request(dir->i_sb, flags, mode);
ceph: include the initial ACL in create/mkdir/mknod MDS requests Current code set new file/directory's initial ACL in a non-atomic manner. Client first sends request to MDS to create new file/directory, then set the initial ACL after the new file/directory is successfully created. The fix is include the initial ACL in create/mkdir/mknod MDS requests. So MDS can handle creating file/directory and setting the initial ACL in one request. Signed-off-by: Yan, Zheng <zyan@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com>
2014-09-16 20:35:17 +08:00
if (IS_ERR(req)) {
err = PTR_ERR(req);
goto out_acl;
}
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
req->r_dentry = dget(dentry);
req->r_num_caps = 2;
if (flags & O_CREAT) {
req->r_dentry_drop = CEPH_CAP_FILE_SHARED;
req->r_dentry_unless = CEPH_CAP_FILE_EXCL;
ceph: include the initial ACL in create/mkdir/mknod MDS requests Current code set new file/directory's initial ACL in a non-atomic manner. Client first sends request to MDS to create new file/directory, then set the initial ACL after the new file/directory is successfully created. The fix is include the initial ACL in create/mkdir/mknod MDS requests. So MDS can handle creating file/directory and setting the initial ACL in one request. Signed-off-by: Yan, Zheng <zyan@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com>
2014-09-16 20:35:17 +08:00
if (acls.pagelist) {
req->r_pagelist = acls.pagelist;
acls.pagelist = NULL;
}
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
}
ceph: fix security xattr deadlock When security is enabled, security module can call filesystem's getxattr/setxattr callbacks during d_instantiate(). For cephfs, d_instantiate() is usually called by MDS' dispatch thread, while handling MDS reply. If the MDS reply does not include xattrs and corresponding caps, getxattr/setxattr need to send a new request to MDS and waits for the reply. This makes MDS' dispatch sleep, nobody handles later MDS replies. The fix is make sure lookup/atomic_open reply include xattrs and corresponding caps. So getxattr can be handled by cached xattrs. This requires some modification to both MDS and request message. (Client tells MDS what caps it wants; MDS encodes proper caps in the reply) Smack security module may call setxattr during d_instantiate(). Unlike getxattr, we can't force MDS to issue CEPH_CAP_XATTR_EXCL to us. So just make setxattr return error when called by MDS' dispatch thread. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-03-07 10:34:50 +08:00
mask = CEPH_STAT_CAP_INODE | CEPH_CAP_AUTH_SHARED;
if (ceph_security_xattr_wanted(dir))
mask |= CEPH_CAP_XATTR_SHARED;
req->r_args.open.mask = cpu_to_le32(mask);
ceph: add a new flag to indicate whether parent is locked struct ceph_mds_request has an r_locked_dir pointer, which is set to indicate the parent inode and that its i_rwsem is locked. In some critical places, we need to be able to indicate the parent inode to the request handling code, even when its i_rwsem may not be locked. Most of the code that operates on r_locked_dir doesn't require that the i_rwsem be locked. We only really need it to handle manipulation of the dcache. The rest (filling of the inode, updating dentry leases, etc.) already has its own locking. Add a new r_req_flags bit that indicates whether the parent is locked when doing the request, and rename the pointer to "r_parent". For now, all the places that set r_parent also set this flag, but that will change in a later patch. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-01-31 23:28:26 +08:00
req->r_parent = dir;
set_bit(CEPH_MDS_R_PARENT_LOCKED, &req->r_req_flags);
ceph: fix bad parent_inode calc in ceph_lookup_open We were always getting NULL here because the intent file f_dentry is always NULL at this point, which means we were always passing NULL to ceph_mdsc_do_request. In reality, this was fine, since this isn't currently ever a write operation that needs to get strung on the dir's unsafe list. Use the dir explicitly, and only pass it if this open has side-effects that a dir fsync should flush. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-27 02:27:48 +08:00
err = ceph_mdsc_do_request(mdsc,
(flags & (O_CREAT|O_TRUNC)) ? dir : NULL,
req);
ceph: fix atomic_open snapdir ceph_handle_snapdir() checks ceph_mdsc_do_request()'s return value and creates snapdir inode if it's -ENOENT Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-01-19 13:23:20 +08:00
err = ceph_handle_snapdir(req, dentry, err);
ceph: Check for err on mds request in atomic_open The error returned by ceph_mdsc_do_request includes errors sending the request, errors on timeout, or any errors coming from the mds. If ceph_mdsc_do_request returns an error, the reply struct will most likely be bogus. We need to bail out and propogate the error instead of overwriting it. Signed-off-by: Sam Lang <sam.lang@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-12-20 03:44:23 +08:00
if (err)
ceph: include the initial ACL in create/mkdir/mknod MDS requests Current code set new file/directory's initial ACL in a non-atomic manner. Client first sends request to MDS to create new file/directory, then set the initial ACL after the new file/directory is successfully created. The fix is include the initial ACL in create/mkdir/mknod MDS requests. So MDS can handle creating file/directory and setting the initial ACL in one request. Signed-off-by: Yan, Zheng <zyan@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com>
2014-09-16 20:35:17 +08:00
goto out_req;
ceph: Check for err on mds request in atomic_open The error returned by ceph_mdsc_do_request includes errors sending the request, errors on timeout, or any errors coming from the mds. If ceph_mdsc_do_request returns an error, the reply struct will most likely be bogus. We need to bail out and propogate the error instead of overwriting it. Signed-off-by: Sam Lang <sam.lang@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-12-20 03:44:23 +08:00
ceph: remove the useless judgement err != 0 is already handled. So skip this. Signed-off-by: Jianpeng Ma <jianpeng.ma@intel.com> Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-08-18 10:23:50 +08:00
if ((flags & O_CREAT) && !req->r_reply_info.head->is_dentry)
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
err = ceph_handle_notrace_create(dir, dentry);
ceph: implement i_op->atomic_open() Add an ->atomic_open implementation which replaces the atomic lookup+open+create operation implemented via ->lookup and ->create operations. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> CC: Sage Weil <sage@newdream.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-05 21:10:25 +08:00
Use the right predicate in ->atomic_open() instances ->atomic_open() can be given an in-lookup dentry *or* a negative one found in dcache. Use d_in_lookup() to tell one from another, rather than d_unhashed(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-07-05 21:44:53 +08:00
if (d_in_lookup(dentry)) {
ceph: simplify+fix atomic_open The initial ->atomic_open op was carried over from the old intent code, which was incomplete and didn't really work. Replace it with a fresh method. In particular: * always attempt to do an atomic open+lookup, both for the create case and for lookups of existing files. * fix symlink handling by returning 1 to the VFS so that we can follow the link to its destination. This fixes a longstanding ceph bug (#2392). Signed-off-by: Sage Weil <sage@inktank.com>
2012-08-01 02:27:36 +08:00
dn = ceph_finish_lookup(req, dentry, err);
if (IS_ERR(dn))
err = PTR_ERR(dn);
} else {
/* we were given a hashed negative dentry */
dn = NULL;
}
if (err)
ceph: include the initial ACL in create/mkdir/mknod MDS requests Current code set new file/directory's initial ACL in a non-atomic manner. Client first sends request to MDS to create new file/directory, then set the initial ACL after the new file/directory is successfully created. The fix is include the initial ACL in create/mkdir/mknod MDS requests. So MDS can handle creating file/directory and setting the initial ACL in one request. Signed-off-by: Yan, Zheng <zyan@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com>
2014-09-16 20:35:17 +08:00
goto out_req;
VFS: normal filesystems (and lustre): d_inode() annotations that's the bulk of filesystem drivers dealing with inodes of their own Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-03-18 06:25:59 +08:00
if (dn || d_really_is_negative(dentry) || d_is_symlink(dentry)) {
ceph: simplify+fix atomic_open The initial ->atomic_open op was carried over from the old intent code, which was incomplete and didn't really work. Replace it with a fresh method. In particular: * always attempt to do an atomic open+lookup, both for the create case and for lookups of existing files. * fix symlink handling by returning 1 to the VFS so that we can follow the link to its destination. This fixes a longstanding ceph bug (#2392). Signed-off-by: Sage Weil <sage@inktank.com>
2012-08-01 02:27:36 +08:00
/* make vfs retry on splice, ENOENT, or symlink */
dout("atomic_open finish_no_open on dn %p\n", dn);
err = finish_no_open(file, dn);
} else {
dout("atomic_open finish_open on dn %p\n", dn);
ceph: Check for created flag in response from mds The mds now sends back a created inode if the create request performed the create. If the file already existed, no inode is returned in the reply. This allows ceph to set the created flag in atomic_open so that permissions are properly checked in the case that the file wasn't created by the create call to the mds. To ensure compability with previous kernels, a feature for sending back the inode in the create reply was added, so that the mds will only send back the inode if the client indicates it supports the feature. Signed-off-by: Sam Lang <sam.lang@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-12-29 01:56:46 +08:00
if (req->r_op == CEPH_MDS_OP_CREATE && req->r_reply_info.has_create_ino) {
VFS: normal filesystems (and lustre): d_inode() annotations that's the bulk of filesystem drivers dealing with inodes of their own Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-03-18 06:25:59 +08:00
ceph_init_inode_acls(d_inode(dentry), &acls);
ceph: Check for created flag in response from mds The mds now sends back a created inode if the create request performed the create. If the file already existed, no inode is returned in the reply. This allows ceph to set the created flag in atomic_open so that permissions are properly checked in the case that the file wasn't created by the create call to the mds. To ensure compability with previous kernels, a feature for sending back the inode in the create reply was added, so that the mds will only send back the inode if the client indicates it supports the feature. Signed-off-by: Sam Lang <sam.lang@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2012-12-29 01:56:46 +08:00
*opened |= FILE_CREATED;
}
ceph: simplify+fix atomic_open The initial ->atomic_open op was carried over from the old intent code, which was incomplete and didn't really work. Replace it with a fresh method. In particular: * always attempt to do an atomic open+lookup, both for the create case and for lookups of existing files. * fix symlink handling by returning 1 to the VFS so that we can follow the link to its destination. This fixes a longstanding ceph bug (#2392). Signed-off-by: Sage Weil <sage@inktank.com>
2012-08-01 02:27:36 +08:00
err = finish_open(file, dentry, ceph_open, opened);
}
ceph: include the initial ACL in create/mkdir/mknod MDS requests Current code set new file/directory's initial ACL in a non-atomic manner. Client first sends request to MDS to create new file/directory, then set the initial ACL after the new file/directory is successfully created. The fix is include the initial ACL in create/mkdir/mknod MDS requests. So MDS can handle creating file/directory and setting the initial ACL in one request. Signed-off-by: Yan, Zheng <zyan@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com>
2014-09-16 20:35:17 +08:00
out_req:
ceph: drop extra open file reference in ceph_atomic_open() ceph_atomic_open() calls ceph_open() after receiving the MDS reply. ceph_open() grabs an extra open file reference. (The open request already holds an open file reference) Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2014-04-01 20:20:17 +08:00
if (!req->r_err && req->r_target_inode)
ceph_put_fmode(ceph_inode(req->r_target_inode), req->r_fmode);
ceph: simplify+fix atomic_open The initial ->atomic_open op was carried over from the old intent code, which was incomplete and didn't really work. Replace it with a fresh method. In particular: * always attempt to do an atomic open+lookup, both for the create case and for lookups of existing files. * fix symlink handling by returning 1 to the VFS so that we can follow the link to its destination. This fixes a longstanding ceph bug (#2392). Signed-off-by: Sage Weil <sage@inktank.com>
2012-08-01 02:27:36 +08:00
ceph_mdsc_put_request(req);
ceph: include the initial ACL in create/mkdir/mknod MDS requests Current code set new file/directory's initial ACL in a non-atomic manner. Client first sends request to MDS to create new file/directory, then set the initial ACL after the new file/directory is successfully created. The fix is include the initial ACL in create/mkdir/mknod MDS requests. So MDS can handle creating file/directory and setting the initial ACL in one request. Signed-off-by: Yan, Zheng <zyan@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com>
2014-09-16 20:35:17 +08:00
out_acl:
ceph_release_acls_info(&acls);
ceph: simplify+fix atomic_open The initial ->atomic_open op was carried over from the old intent code, which was incomplete and didn't really work. Replace it with a fresh method. In particular: * always attempt to do an atomic open+lookup, both for the create case and for lookups of existing files. * fix symlink handling by returning 1 to the VFS so that we can follow the link to its destination. This fixes a longstanding ceph bug (#2392). Signed-off-by: Sage Weil <sage@inktank.com>
2012-08-01 02:27:36 +08:00
dout("atomic_open result=%d\n", err);
make ->atomic_open() return int Change of calling conventions: old new NULL 1 file 0 ERR_PTR(-ve) -ve Caller *knows* that struct file *; no need to return it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-22 16:39:14 +08:00
return err;
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
}
int ceph_release(struct inode *inode, struct file *file)
{
struct ceph_inode_info *ci = ceph_inode(inode);
struct ceph_file_info *cf = file->private_data;
dout("release inode %p file %p\n", inode, file);
ceph_put_fmode(ci, cf->fmode);
if (cf->last_readdir)
ceph_mdsc_put_request(cf->last_readdir);
kfree(cf->last_name);
kfree(cf->dir_info);
kmem_cache_free(ceph_file_cachep, cf);
ceph: return EBADF if waiting for caps on closed file Verify the file is actually open for the given caps when we are waiting for caps. This ensures we will wake up and return EBADF if another thread closes the file out from under us. Note that EBADF is also the correct return code from write(2) when called on a file handle opened for reading (although the vfs should catch that). Signed-off-by: Sage Weil <sage@newdream.net>
2010-03-02 01:57:54 +08:00
/* wake up anyone waiting for caps on this inode */
ceph: use complete_all and wake_up_all This fixes an issue triggered by running concurrent syncs. One of the syncs would go through while the other would just hang indefinitely. In any case, we never actually want to wake a single waiter, so the *_all functions should be used. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-07-28 04:11:08 +08:00
wake_up_all(&ci->i_cap_wq);
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
return 0;
}
ceph: sync read inline data we can't use getattr to fetch inline data while holding Fr cap, because it can cause deadlock. If we need to sync read inline data, drop cap refs first, then use getattr to fetch inline data. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-11-14 22:36:18 +08:00
enum {
ceph: Asynchronous IO support The basic idea of AIO support is simple, just call kiocb::ki_complete() in OSD request's complete callback. But there are several special cases. when IO span multiple objects, we need to wait until all OSD requests are complete, then call kiocb::ki_complete(). Error handling in this case is tricky too. For simplify, AIO both span multiple objects and extends i_size are not allowed. Another special case is check EOF for reading (other client can write to the file and extend i_size concurrently). For simplify, the direct-IO/AIO code path does do the check, fallback to normal syn read instead. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-23 21:23:38 +08:00
HAVE_RETRIED = 1,
CHECK_EOF = 2,
READ_INLINE = 3,
ceph: sync read inline data we can't use getattr to fetch inline data while holding Fr cap, because it can cause deadlock. If we need to sync read inline data, drop cap refs first, then use getattr to fetch inline data. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-11-14 22:36:18 +08:00
};
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
/*
* Read a range of bytes striped over one or more objects. Iterate over
* objects we stripe over. (That's not atomic, but good enough for now.)
*
* If we get a short result from the OSD, check against i_size; we need to
* only return a short read to the caller if we hit EOF.
*/
static int striped_read(struct inode *inode,
ceph: fix splice read for no Fc capability case When iov_iter type is ITER_PIPE, copy_page_to_iter() increases the page's reference and add the page to a pipe_buffer. It also set the pipe_buffer's ops to page_cache_pipe_buf_ops. The comfirm callback in page_cache_pipe_buf_ops expects the page is from page cache and uptodate, otherwise it return error. For ceph_sync_read() case, pages are not from page cache. So we can't call copy_page_to_iter() when iov_iter type is ITER_PIPE. The fix is using iov_iter_get_pages_alloc() to allocate pages for the pipe. (the code is similar to default_file_splice_read) Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-11-08 21:54:34 +08:00
u64 pos, u64 len,
ceph: fix sync read eof check deadlock If a sync read gets a short result from the OSD, it may need to do a getattr to see if it is short due to reaching end-of-file. The getattr was being done while holding a reference to FILE_RD, which can lead to a deadlock if the MDS is revoking that capability bit and can't process the getattr until it does. We fix this by setting a flag if EOF size validation is needed, and doing the getattr in ceph_aio_read, after the RD cap ref is dropped. If the read needs to be continued, we loop and continue traversing the file. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-10 06:04:02 +08:00
struct page **pages, int num_pages,
ceph: fix splice read for no Fc capability case When iov_iter type is ITER_PIPE, copy_page_to_iter() increases the page's reference and add the page to a pipe_buffer. It also set the pipe_buffer's ops to page_cache_pipe_buf_ops. The comfirm callback in page_cache_pipe_buf_ops expects the page is from page cache and uptodate, otherwise it return error. For ceph_sync_read() case, pages are not from page cache. So we can't call copy_page_to_iter() when iov_iter type is ITER_PIPE. The fix is using iov_iter_get_pages_alloc() to allocate pages for the pipe. (the code is similar to default_file_splice_read) Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-11-08 21:54:34 +08:00
int page_align, int *checkeof)
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
{
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
struct ceph_fs_client *fsc = ceph_inode_to_client(inode);
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
struct ceph_inode_info *ci = ceph_inode(inode);
ceph: fix splice read for no Fc capability case When iov_iter type is ITER_PIPE, copy_page_to_iter() increases the page's reference and add the page to a pipe_buffer. It also set the pipe_buffer's ops to page_cache_pipe_buf_ops. The comfirm callback in page_cache_pipe_buf_ops expects the page is from page cache and uptodate, otherwise it return error. For ceph_sync_read() case, pages are not from page cache. So we can't call copy_page_to_iter() when iov_iter type is ITER_PIPE. The fix is using iov_iter_get_pages_alloc() to allocate pages for the pipe. (the code is similar to default_file_splice_read) Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-11-08 21:54:34 +08:00
u64 this_len;
ceph: use i_size_{read,write} to get/set i_size Cap message from MDS can update i_size. In that case, we don't hold i_mutex. So it's unsafe to directly access inode->i_size while holding i_mutex. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-30 11:32:46 +08:00
loff_t i_size;
ceph: fix splice read for no Fc capability case When iov_iter type is ITER_PIPE, copy_page_to_iter() increases the page's reference and add the page to a pipe_buffer. It also set the pipe_buffer's ops to page_cache_pipe_buf_ops. The comfirm callback in page_cache_pipe_buf_ops expects the page is from page cache and uptodate, otherwise it return error. For ceph_sync_read() case, pages are not from page cache. So we can't call copy_page_to_iter() when iov_iter type is ITER_PIPE. The fix is using iov_iter_get_pages_alloc() to allocate pages for the pipe. (the code is similar to default_file_splice_read) Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-11-08 21:54:34 +08:00
int page_idx;
int ret, read = 0;
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
bool hit_stripe, was_short;
/*
* we may need to do multiple reads. not atomic, unfortunately.
*/
more:
ceph: fix splice read for no Fc capability case When iov_iter type is ITER_PIPE, copy_page_to_iter() increases the page's reference and add the page to a pipe_buffer. It also set the pipe_buffer's ops to page_cache_pipe_buf_ops. The comfirm callback in page_cache_pipe_buf_ops expects the page is from page cache and uptodate, otherwise it return error. For ceph_sync_read() case, pages are not from page cache. So we can't call copy_page_to_iter() when iov_iter type is ITER_PIPE. The fix is using iov_iter_get_pages_alloc() to allocate pages for the pipe. (the code is similar to default_file_splice_read) Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-11-08 21:54:34 +08:00
this_len = len;
page_idx = (page_align + read) >> PAGE_SHIFT;
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
ret = ceph_osdc_readpages(&fsc->client->osdc, ceph_vino(inode),
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
&ci->i_layout, pos, &this_len,
ceph: fix splice read for no Fc capability case When iov_iter type is ITER_PIPE, copy_page_to_iter() increases the page's reference and add the page to a pipe_buffer. It also set the pipe_buffer's ops to page_cache_pipe_buf_ops. The comfirm callback in page_cache_pipe_buf_ops expects the page is from page cache and uptodate, otherwise it return error. For ceph_sync_read() case, pages are not from page cache. So we can't call copy_page_to_iter() when iov_iter type is ITER_PIPE. The fix is using iov_iter_get_pages_alloc() to allocate pages for the pipe. (the code is similar to default_file_splice_read) Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-11-08 21:54:34 +08:00
ci->i_truncate_seq, ci->i_truncate_size,
pages + page_idx, num_pages - page_idx,
((page_align + read) & ~PAGE_MASK));
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
if (ret == -ENOENT)
ret = 0;
ceph: fix splice read for no Fc capability case When iov_iter type is ITER_PIPE, copy_page_to_iter() increases the page's reference and add the page to a pipe_buffer. It also set the pipe_buffer's ops to page_cache_pipe_buf_ops. The comfirm callback in page_cache_pipe_buf_ops expects the page is from page cache and uptodate, otherwise it return error. For ceph_sync_read() case, pages are not from page cache. So we can't call copy_page_to_iter() when iov_iter type is ITER_PIPE. The fix is using iov_iter_get_pages_alloc() to allocate pages for the pipe. (the code is similar to default_file_splice_read) Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-11-08 21:54:34 +08:00
hit_stripe = this_len < len;
ceph: fix ENOENT logic in striped_read Getting ENOENT is equivalent to reading 0 bytes. Make that correction before setting up the hit_stripe and was_short flags. Fixes the following case: dd if=/dev/zero of=/mnt/fs_depot/dd3 bs=1 seek=1048576 count=0 dd if=/mnt/fs_depot/dd3 of=/root/ddout1 skip=8 bs=500 count=2 iflag=direct Reported-by: Henry C Chang <henry.cy.chang@gmail.com> Signed-off-by: Sage Weil <sage@newdream.net>
2011-06-08 11:40:35 +08:00
was_short = ret >= 0 && ret < this_len;
ceph: fix splice read for no Fc capability case When iov_iter type is ITER_PIPE, copy_page_to_iter() increases the page's reference and add the page to a pipe_buffer. It also set the pipe_buffer's ops to page_cache_pipe_buf_ops. The comfirm callback in page_cache_pipe_buf_ops expects the page is from page cache and uptodate, otherwise it return error. For ceph_sync_read() case, pages are not from page cache. So we can't call copy_page_to_iter() when iov_iter type is ITER_PIPE. The fix is using iov_iter_get_pages_alloc() to allocate pages for the pipe. (the code is similar to default_file_splice_read) Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-11-08 21:54:34 +08:00
dout("striped_read %llu~%llu (read %u) got %d%s%s\n", pos, len, read,
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
ret, hit_stripe ? " HITSTRIPE" : "", was_short ? " SHORT" : "");
ceph: use i_size_{read,write} to get/set i_size Cap message from MDS can update i_size. In that case, we don't hold i_mutex. So it's unsafe to directly access inode->i_size while holding i_mutex. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-30 11:32:46 +08:00
i_size = i_size_read(inode);
ceph: fix bugs about handling short-read for sync read mode. cephfs . show_layout >layyout.data_pool: 0 >layout.object_size: 4194304 >layout.stripe_unit: 4194304 >layout.stripe_count: 1 TestA: >dd if=/dev/urandom of=test bs=1M count=2 oflag=direct >dd if=/dev/urandom of=test bs=1M count=2 seek=4 oflag=direct >dd if=test of=/dev/null bs=6M count=1 iflag=direct The messages from func striped_read are: ceph: file.c:350 : striped_read 0~6291456 (read 0) got 2097152 HITSTRIPE SHORT ceph: file.c:350 : striped_read 2097152~4194304 (read 2097152) got 0 HITSTRIPE SHORT ceph: file.c:381 : zero tail 4194304 ceph: file.c:390 : striped_read returns 6291456 The hole of file is from 2M--4M.But actualy it zero the last 4M include the last 2M area which isn't a hole. Using this patch, the messages are: ceph: file.c:350 : striped_read 0~6291456 (read 0) got 2097152 HITSTRIPE SHORT ceph: file.c:358 : zero gap 2097152 to 4194304 ceph: file.c:350 : striped_read 4194304~2097152 (read 4194304) got 2097152 ceph: file.c:384 : striped_read returns 6291456 TestB: >echo majianpeng > test >dd if=test of=/dev/null bs=2M count=1 iflag=direct The messages are: ceph: file.c:350 : striped_read 0~6291456 (read 0) got 11 HITSTRIPE SHORT ceph: file.c:350 : striped_read 11~6291445 (read 11) got 0 HITSTRIPE SHORT ceph: file.c:390 : striped_read returns 11 For this case,it did once more striped_read.It's no meaningless. Using this patch, the message are: ceph: file.c:350 : striped_read 0~6291456 (read 0) got 11 HITSTRIPE SHORT ceph: file.c:384 : striped_read returns 11 Big thanks to Yan Zheng for the patch. Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
2013-08-06 16:20:38 +08:00
if (ret >= 0) {
ceph: use i_size_{read,write} to get/set i_size Cap message from MDS can update i_size. In that case, we don't hold i_mutex. So it's unsafe to directly access inode->i_size while holding i_mutex. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-30 11:32:46 +08:00
if (was_short && (pos + ret < i_size)) {
int zlen = min(this_len - ret, i_size - pos - ret);
ceph: fix splice read for no Fc capability case When iov_iter type is ITER_PIPE, copy_page_to_iter() increases the page's reference and add the page to a pipe_buffer. It also set the pipe_buffer's ops to page_cache_pipe_buf_ops. The comfirm callback in page_cache_pipe_buf_ops expects the page is from page cache and uptodate, otherwise it return error. For ceph_sync_read() case, pages are not from page cache. So we can't call copy_page_to_iter() when iov_iter type is ITER_PIPE. The fix is using iov_iter_get_pages_alloc() to allocate pages for the pipe. (the code is similar to default_file_splice_read) Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-11-08 21:54:34 +08:00
int zoff = page_align + read + ret;
ceph: fix bugs about handling short-read for sync read mode. cephfs . show_layout >layyout.data_pool: 0 >layout.object_size: 4194304 >layout.stripe_unit: 4194304 >layout.stripe_count: 1 TestA: >dd if=/dev/urandom of=test bs=1M count=2 oflag=direct >dd if=/dev/urandom of=test bs=1M count=2 seek=4 oflag=direct >dd if=test of=/dev/null bs=6M count=1 iflag=direct The messages from func striped_read are: ceph: file.c:350 : striped_read 0~6291456 (read 0) got 2097152 HITSTRIPE SHORT ceph: file.c:350 : striped_read 2097152~4194304 (read 2097152) got 0 HITSTRIPE SHORT ceph: file.c:381 : zero tail 4194304 ceph: file.c:390 : striped_read returns 6291456 The hole of file is from 2M--4M.But actualy it zero the last 4M include the last 2M area which isn't a hole. Using this patch, the messages are: ceph: file.c:350 : striped_read 0~6291456 (read 0) got 2097152 HITSTRIPE SHORT ceph: file.c:358 : zero gap 2097152 to 4194304 ceph: file.c:350 : striped_read 4194304~2097152 (read 4194304) got 2097152 ceph: file.c:384 : striped_read returns 6291456 TestB: >echo majianpeng > test >dd if=test of=/dev/null bs=2M count=1 iflag=direct The messages are: ceph: file.c:350 : striped_read 0~6291456 (read 0) got 11 HITSTRIPE SHORT ceph: file.c:350 : striped_read 11~6291445 (read 11) got 0 HITSTRIPE SHORT ceph: file.c:390 : striped_read returns 11 For this case,it did once more striped_read.It's no meaningless. Using this patch, the message are: ceph: file.c:350 : striped_read 0~6291456 (read 0) got 11 HITSTRIPE SHORT ceph: file.c:384 : striped_read returns 11 Big thanks to Yan Zheng for the patch. Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
2013-08-06 16:20:38 +08:00
dout(" zero gap %llu to %llu\n",
ceph: fix splice read for no Fc capability case When iov_iter type is ITER_PIPE, copy_page_to_iter() increases the page's reference and add the page to a pipe_buffer. It also set the pipe_buffer's ops to page_cache_pipe_buf_ops. The comfirm callback in page_cache_pipe_buf_ops expects the page is from page cache and uptodate, otherwise it return error. For ceph_sync_read() case, pages are not from page cache. So we can't call copy_page_to_iter() when iov_iter type is ITER_PIPE. The fix is using iov_iter_get_pages_alloc() to allocate pages for the pipe. (the code is similar to default_file_splice_read) Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-11-08 21:54:34 +08:00
pos + ret, pos + ret + zlen);
ceph: properly zero data pages for file holes. A bug is found in striped_read() of fs/ceph/file.c. striped_read() calls ceph_zero_pape_vector_range(). The first argument, page_align + read + ret, passed to ceph_zero_pape_vector_range() is wrong. When a file has holes, this wrong parameter may cause memory corruption either in kernal space or user space. Kernel space memory may be corrupted in the case of non direct IO; user space memory may be corrupted in the case of direct IO. In the latter case, the application doing direct IO may crash due to memory corruption, as we have experienced. The correct value should be initial_align + read + ret, where intial_align = o_direct ? buf_align : io_align. Compared with page_align, the current page offest, initial_align is the initial page offest, which should be used to calculate the page and offset in ceph_zero_pape_vector_range(). Reported-by: caifeng zhu <zhucaifeng@unissoft-nj.com> Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-01-06 15:29:14 +08:00
ceph_zero_page_vector_range(zoff, zlen, pages);
ret += zlen;
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
}
ceph: fix bugs about handling short-read for sync read mode. cephfs . show_layout >layyout.data_pool: 0 >layout.object_size: 4194304 >layout.stripe_unit: 4194304 >layout.stripe_count: 1 TestA: >dd if=/dev/urandom of=test bs=1M count=2 oflag=direct >dd if=/dev/urandom of=test bs=1M count=2 seek=4 oflag=direct >dd if=test of=/dev/null bs=6M count=1 iflag=direct The messages from func striped_read are: ceph: file.c:350 : striped_read 0~6291456 (read 0) got 2097152 HITSTRIPE SHORT ceph: file.c:350 : striped_read 2097152~4194304 (read 2097152) got 0 HITSTRIPE SHORT ceph: file.c:381 : zero tail 4194304 ceph: file.c:390 : striped_read returns 6291456 The hole of file is from 2M--4M.But actualy it zero the last 4M include the last 2M area which isn't a hole. Using this patch, the messages are: ceph: file.c:350 : striped_read 0~6291456 (read 0) got 2097152 HITSTRIPE SHORT ceph: file.c:358 : zero gap 2097152 to 4194304 ceph: file.c:350 : striped_read 4194304~2097152 (read 4194304) got 2097152 ceph: file.c:384 : striped_read returns 6291456 TestB: >echo majianpeng > test >dd if=test of=/dev/null bs=2M count=1 iflag=direct The messages are: ceph: file.c:350 : striped_read 0~6291456 (read 0) got 11 HITSTRIPE SHORT ceph: file.c:350 : striped_read 11~6291445 (read 11) got 0 HITSTRIPE SHORT ceph: file.c:390 : striped_read returns 11 For this case,it did once more striped_read.It's no meaningless. Using this patch, the message are: ceph: file.c:350 : striped_read 0~6291456 (read 0) got 11 HITSTRIPE SHORT ceph: file.c:384 : striped_read returns 11 Big thanks to Yan Zheng for the patch. Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
2013-08-06 16:20:38 +08:00
ceph: fix splice read for no Fc capability case When iov_iter type is ITER_PIPE, copy_page_to_iter() increases the page's reference and add the page to a pipe_buffer. It also set the pipe_buffer's ops to page_cache_pipe_buf_ops. The comfirm callback in page_cache_pipe_buf_ops expects the page is from page cache and uptodate, otherwise it return error. For ceph_sync_read() case, pages are not from page cache. So we can't call copy_page_to_iter() when iov_iter type is ITER_PIPE. The fix is using iov_iter_get_pages_alloc() to allocate pages for the pipe. (the code is similar to default_file_splice_read) Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-11-08 21:54:34 +08:00
read += ret;
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
pos += ret;
ceph: fix splice read for no Fc capability case When iov_iter type is ITER_PIPE, copy_page_to_iter() increases the page's reference and add the page to a pipe_buffer. It also set the pipe_buffer's ops to page_cache_pipe_buf_ops. The comfirm callback in page_cache_pipe_buf_ops expects the page is from page cache and uptodate, otherwise it return error. For ceph_sync_read() case, pages are not from page cache. So we can't call copy_page_to_iter() when iov_iter type is ITER_PIPE. The fix is using iov_iter_get_pages_alloc() to allocate pages for the pipe. (the code is similar to default_file_splice_read) Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-11-08 21:54:34 +08:00
len -= ret;
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
ceph: fix bugs about handling short-read for sync read mode. cephfs . show_layout >layyout.data_pool: 0 >layout.object_size: 4194304 >layout.stripe_unit: 4194304 >layout.stripe_count: 1 TestA: >dd if=/dev/urandom of=test bs=1M count=2 oflag=direct >dd if=/dev/urandom of=test bs=1M count=2 seek=4 oflag=direct >dd if=test of=/dev/null bs=6M count=1 iflag=direct The messages from func striped_read are: ceph: file.c:350 : striped_read 0~6291456 (read 0) got 2097152 HITSTRIPE SHORT ceph: file.c:350 : striped_read 2097152~4194304 (read 2097152) got 0 HITSTRIPE SHORT ceph: file.c:381 : zero tail 4194304 ceph: file.c:390 : striped_read returns 6291456 The hole of file is from 2M--4M.But actualy it zero the last 4M include the last 2M area which isn't a hole. Using this patch, the messages are: ceph: file.c:350 : striped_read 0~6291456 (read 0) got 2097152 HITSTRIPE SHORT ceph: file.c:358 : zero gap 2097152 to 4194304 ceph: file.c:350 : striped_read 4194304~2097152 (read 4194304) got 2097152 ceph: file.c:384 : striped_read returns 6291456 TestB: >echo majianpeng > test >dd if=test of=/dev/null bs=2M count=1 iflag=direct The messages are: ceph: file.c:350 : striped_read 0~6291456 (read 0) got 11 HITSTRIPE SHORT ceph: file.c:350 : striped_read 11~6291445 (read 11) got 0 HITSTRIPE SHORT ceph: file.c:390 : striped_read returns 11 For this case,it did once more striped_read.It's no meaningless. Using this patch, the message are: ceph: file.c:350 : striped_read 0~6291456 (read 0) got 11 HITSTRIPE SHORT ceph: file.c:384 : striped_read returns 11 Big thanks to Yan Zheng for the patch. Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
2013-08-06 16:20:38 +08:00
/* hit stripe and need continue*/
ceph: fix splice read for no Fc capability case When iov_iter type is ITER_PIPE, copy_page_to_iter() increases the page's reference and add the page to a pipe_buffer. It also set the pipe_buffer's ops to page_cache_pipe_buf_ops. The comfirm callback in page_cache_pipe_buf_ops expects the page is from page cache and uptodate, otherwise it return error. For ceph_sync_read() case, pages are not from page cache. So we can't call copy_page_to_iter() when iov_iter type is ITER_PIPE. The fix is using iov_iter_get_pages_alloc() to allocate pages for the pipe. (the code is similar to default_file_splice_read) Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-11-08 21:54:34 +08:00
if (len && hit_stripe && pos < i_size)
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
goto more;
}
ceph: allow sync_read/write return partial successed size of read/write. For sync_read/write, it may do multi stripe operations.If one of those met erro, we return the former successed size rather than a error value. There is a exception for write-operation met -EOLDSNAPC.If this occur,we retry the whole write again. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
2013-08-21 15:02:51 +08:00
if (read > 0) {
ceph: fix bugs about handling short-read for sync read mode. cephfs . show_layout >layyout.data_pool: 0 >layout.object_size: 4194304 >layout.stripe_unit: 4194304 >layout.stripe_count: 1 TestA: >dd if=/dev/urandom of=test bs=1M count=2 oflag=direct >dd if=/dev/urandom of=test bs=1M count=2 seek=4 oflag=direct >dd if=test of=/dev/null bs=6M count=1 iflag=direct The messages from func striped_read are: ceph: file.c:350 : striped_read 0~6291456 (read 0) got 2097152 HITSTRIPE SHORT ceph: file.c:350 : striped_read 2097152~4194304 (read 2097152) got 0 HITSTRIPE SHORT ceph: file.c:381 : zero tail 4194304 ceph: file.c:390 : striped_read returns 6291456 The hole of file is from 2M--4M.But actualy it zero the last 4M include the last 2M area which isn't a hole. Using this patch, the messages are: ceph: file.c:350 : striped_read 0~6291456 (read 0) got 2097152 HITSTRIPE SHORT ceph: file.c:358 : zero gap 2097152 to 4194304 ceph: file.c:350 : striped_read 4194304~2097152 (read 4194304) got 2097152 ceph: file.c:384 : striped_read returns 6291456 TestB: >echo majianpeng > test >dd if=test of=/dev/null bs=2M count=1 iflag=direct The messages are: ceph: file.c:350 : striped_read 0~6291456 (read 0) got 11 HITSTRIPE SHORT ceph: file.c:350 : striped_read 11~6291445 (read 11) got 0 HITSTRIPE SHORT ceph: file.c:390 : striped_read returns 11 For this case,it did once more striped_read.It's no meaningless. Using this patch, the message are: ceph: file.c:350 : striped_read 0~6291456 (read 0) got 11 HITSTRIPE SHORT ceph: file.c:384 : striped_read returns 11 Big thanks to Yan Zheng for the patch. Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
2013-08-06 16:20:38 +08:00
ret = read;
ceph: fix short sync reads from the OSD If we get a short read from the OSD because the object is small, we need to zero the remainder of the buffer. For O_DIRECT reads, the attempted range is not trimmed to i_size by the VFS, so we were actually looping indefinitely. Fix by trimming by i_size, and the unconditionally zeroing the trailing range. Reported-by: Jeff Wu <cpwu@tnsoft.com.cn> Signed-off-by: Sage Weil <sage@newdream.net>
2011-06-02 07:08:44 +08:00
/* did we bounce off eof? */
ceph: fix splice read for no Fc capability case When iov_iter type is ITER_PIPE, copy_page_to_iter() increases the page's reference and add the page to a pipe_buffer. It also set the pipe_buffer's ops to page_cache_pipe_buf_ops. The comfirm callback in page_cache_pipe_buf_ops expects the page is from page cache and uptodate, otherwise it return error. For ceph_sync_read() case, pages are not from page cache. So we can't call copy_page_to_iter() when iov_iter type is ITER_PIPE. The fix is using iov_iter_get_pages_alloc() to allocate pages for the pipe. (the code is similar to default_file_splice_read) Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-11-08 21:54:34 +08:00
if (pos + len > i_size)
ceph: sync read inline data we can't use getattr to fetch inline data while holding Fr cap, because it can cause deadlock. If we need to sync read inline data, drop cap refs first, then use getattr to fetch inline data. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-11-14 22:36:18 +08:00
*checkeof = CHECK_EOF;
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
}
dout("striped_read returns %d\n", ret);
return ret;
}
/*
* Completely synchronous read and write methods. Direct from __user
* buffer to osd, or directly to user pages (if O_DIRECT).
*
* If the read spans object boundary, just do multiple reads.
*/
ceph: fix splice read for no Fc capability case When iov_iter type is ITER_PIPE, copy_page_to_iter() increases the page's reference and add the page to a pipe_buffer. It also set the pipe_buffer's ops to page_cache_pipe_buf_ops. The comfirm callback in page_cache_pipe_buf_ops expects the page is from page cache and uptodate, otherwise it return error. For ceph_sync_read() case, pages are not from page cache. So we can't call copy_page_to_iter() when iov_iter type is ITER_PIPE. The fix is using iov_iter_get_pages_alloc() to allocate pages for the pipe. (the code is similar to default_file_splice_read) Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-11-08 21:54:34 +08:00
static ssize_t ceph_sync_read(struct kiocb *iocb, struct iov_iter *to,
int *checkeof)
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
{
ceph: implement readv/preadv for sync operation For readv/preadv sync-operatoin, ceph only do the first iov. Now implement this. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
2013-09-26 14:42:17 +08:00
struct file *file = iocb->ki_filp;
new helper: file_inode(file) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-01-24 06:07:38 +08:00
struct inode *inode = file_inode(file);
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
struct page **pages;
ceph: implement readv/preadv for sync operation For readv/preadv sync-operatoin, ceph only do the first iov. Now implement this. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
2013-09-26 14:42:17 +08:00
u64 off = iocb->ki_pos;
ceph: fix splice read for no Fc capability case When iov_iter type is ITER_PIPE, copy_page_to_iter() increases the page's reference and add the page to a pipe_buffer. It also set the pipe_buffer's ops to page_cache_pipe_buf_ops. The comfirm callback in page_cache_pipe_buf_ops expects the page is from page cache and uptodate, otherwise it return error. For ceph_sync_read() case, pages are not from page cache. So we can't call copy_page_to_iter() when iov_iter type is ITER_PIPE. The fix is using iov_iter_get_pages_alloc() to allocate pages for the pipe. (the code is similar to default_file_splice_read) Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-11-08 21:54:34 +08:00
int num_pages;
ssize_t ret;
size_t len = iov_iter_count(to);
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
ceph: implement readv/preadv for sync operation For readv/preadv sync-operatoin, ceph only do the first iov. Now implement this. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
2013-09-26 14:42:17 +08:00
dout("sync_read on file %p %llu~%u %s\n", file, off,
(unsigned)len,
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
(file->f_flags & O_DIRECT) ? "O_DIRECT" : "");
ceph: check zero length in ceph_sync_read() Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2014-07-21 10:15:48 +08:00
if (!len)
return 0;
ceph: fix comment, remove extraneous args The offset/length arguments aren't used. Signed-off-by: Sage Weil <sage@newdream.net>
2010-11-10 04:24:53 +08:00
/*
* flush any page cache pages in this range. this
* will make concurrent normal and sync io slow,
* but it will at least behave sensibly when they are
* in sequence.
*/
ceph: implement readv/preadv for sync operation For readv/preadv sync-operatoin, ceph only do the first iov. Now implement this. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
2013-09-26 14:42:17 +08:00
ret = filemap_write_and_wait_range(inode->i_mapping, off,
off + len);
ceph: sync read/write considers page cache In the cases where we either do a sync read or a write, we need to make sure that everything in the page cache is flushed. In the case of a sync write we invalidate the relevant pages, so that subsequent read/write reflects the new data written. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-10 03:14:41 +08:00
if (ret < 0)
ceph: implement readv/preadv for sync operation For readv/preadv sync-operatoin, ceph only do the first iov. Now implement this. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
2013-09-26 14:42:17 +08:00
return ret;
ceph: sync read/write considers page cache In the cases where we either do a sync read or a write, we need to make sure that everything in the page cache is flushed. In the case of a sync write we invalidate the relevant pages, so that subsequent read/write reflects the new data written. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-10 03:14:41 +08:00
ceph: fix splice read for no Fc capability case When iov_iter type is ITER_PIPE, copy_page_to_iter() increases the page's reference and add the page to a pipe_buffer. It also set the pipe_buffer's ops to page_cache_pipe_buf_ops. The comfirm callback in page_cache_pipe_buf_ops expects the page is from page cache and uptodate, otherwise it return error. For ceph_sync_read() case, pages are not from page cache. So we can't call copy_page_to_iter() when iov_iter type is ITER_PIPE. The fix is using iov_iter_get_pages_alloc() to allocate pages for the pipe. (the code is similar to default_file_splice_read) Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-11-08 21:54:34 +08:00
if (unlikely(to->type & ITER_PIPE)) {
size_t page_off;
ret = iov_iter_get_pages_alloc(to, &pages, len,
&page_off);
if (ret <= 0)
return -ENOMEM;
num_pages = DIV_ROUND_UP(ret + page_off, PAGE_SIZE);
ret = striped_read(inode, off, ret, pages, num_pages,
page_off, checkeof);
if (ret > 0) {
iov_iter_advance(to, ret);
off += ret;
} else {
iov_iter_advance(to, 0);
}
ceph_put_page_vector(pages, num_pages, false);
} else {
num_pages = calc_pages_for(off, len);
pages = ceph_alloc_page_vector(num_pages, GFP_KERNEL);
if (IS_ERR(pages))
return PTR_ERR(pages);
ret = striped_read(inode, off, len, pages, num_pages,
(off & ~PAGE_MASK), checkeof);
if (ret > 0) {
int l, k = 0;
size_t left = ret;
while (left) {
size_t page_off = off & ~PAGE_MASK;
size_t copy = min_t(size_t, left,
PAGE_SIZE - page_off);
l = copy_page_to_iter(pages[k++], page_off,
copy, to);
off += l;
left -= l;
if (l < copy)
break;
}
ceph: implement readv/preadv for sync operation For readv/preadv sync-operatoin, ceph only do the first iov. Now implement this. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
2013-09-26 14:42:17 +08:00
}
ceph: fix splice read for no Fc capability case When iov_iter type is ITER_PIPE, copy_page_to_iter() increases the page's reference and add the page to a pipe_buffer. It also set the pipe_buffer's ops to page_cache_pipe_buf_ops. The comfirm callback in page_cache_pipe_buf_ops expects the page is from page cache and uptodate, otherwise it return error. For ceph_sync_read() case, pages are not from page cache. So we can't call copy_page_to_iter() when iov_iter type is ITER_PIPE. The fix is using iov_iter_get_pages_alloc() to allocate pages for the pipe. (the code is similar to default_file_splice_read) Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-11-08 21:54:34 +08:00
ceph_release_page_vector(pages, num_pages);
ceph: implement readv/preadv for sync operation For readv/preadv sync-operatoin, ceph only do the first iov. Now implement this. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
2013-09-26 14:42:17 +08:00
}
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
ceph: implement readv/preadv for sync operation For readv/preadv sync-operatoin, ceph only do the first iov. Now implement this. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
2013-09-26 14:42:17 +08:00
if (off > iocb->ki_pos) {
ret = off - iocb->ki_pos;
iocb->ki_pos = off;
}
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
ceph: fix splice read for no Fc capability case When iov_iter type is ITER_PIPE, copy_page_to_iter() increases the page's reference and add the page to a pipe_buffer. It also set the pipe_buffer's ops to page_cache_pipe_buf_ops. The comfirm callback in page_cache_pipe_buf_ops expects the page is from page cache and uptodate, otherwise it return error. For ceph_sync_read() case, pages are not from page cache. So we can't call copy_page_to_iter() when iov_iter type is ITER_PIPE. The fix is using iov_iter_get_pages_alloc() to allocate pages for the pipe. (the code is similar to default_file_splice_read) Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-11-08 21:54:34 +08:00
dout("sync_read result %zd\n", ret);
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
return ret;
}
ceph: Asynchronous IO support The basic idea of AIO support is simple, just call kiocb::ki_complete() in OSD request's complete callback. But there are several special cases. when IO span multiple objects, we need to wait until all OSD requests are complete, then call kiocb::ki_complete(). Error handling in this case is tricky too. For simplify, AIO both span multiple objects and extends i_size are not allowed. Another special case is check EOF for reading (other client can write to the file and extend i_size concurrently). For simplify, the direct-IO/AIO code path does do the check, fallback to normal syn read instead. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-23 21:23:38 +08:00
struct ceph_aio_request {
struct kiocb *iocb;
size_t total_len;
int write;
int error;
struct list_head osd_reqs;
unsigned num_reqs;
atomic_t pending_reqs;
ceph: re-send AIO write request when getting -EOLDSNAP error When receiving -EOLDSNAP from OSD, we need to re-send corresponding write request. Due to locking issue, we can send new request inside another OSD request's complete callback. So we use worker to re-send request for AIO write. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-24 08:44:20 +08:00
struct timespec mtime;
ceph: Asynchronous IO support The basic idea of AIO support is simple, just call kiocb::ki_complete() in OSD request's complete callback. But there are several special cases. when IO span multiple objects, we need to wait until all OSD requests are complete, then call kiocb::ki_complete(). Error handling in this case is tricky too. For simplify, AIO both span multiple objects and extends i_size are not allowed. Another special case is check EOF for reading (other client can write to the file and extend i_size concurrently). For simplify, the direct-IO/AIO code path does do the check, fallback to normal syn read instead. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-23 21:23:38 +08:00
struct ceph_cap_flush *prealloc_cf;
};
ceph: re-send AIO write request when getting -EOLDSNAP error When receiving -EOLDSNAP from OSD, we need to re-send corresponding write request. Due to locking issue, we can send new request inside another OSD request's complete callback. So we use worker to re-send request for AIO write. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-24 08:44:20 +08:00
struct ceph_aio_work {
struct work_struct work;
struct ceph_osd_request *req;
};
static void ceph_aio_retry_work(struct work_struct *work);
ceph: Asynchronous IO support The basic idea of AIO support is simple, just call kiocb::ki_complete() in OSD request's complete callback. But there are several special cases. when IO span multiple objects, we need to wait until all OSD requests are complete, then call kiocb::ki_complete(). Error handling in this case is tricky too. For simplify, AIO both span multiple objects and extends i_size are not allowed. Another special case is check EOF for reading (other client can write to the file and extend i_size concurrently). For simplify, the direct-IO/AIO code path does do the check, fallback to normal syn read instead. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-23 21:23:38 +08:00
static void ceph_aio_complete(struct inode *inode,
struct ceph_aio_request *aio_req)
{
struct ceph_inode_info *ci = ceph_inode(inode);
int ret;
if (!atomic_dec_and_test(&aio_req->pending_reqs))
return;
ret = aio_req->error;
if (!ret)
ret = aio_req->total_len;
dout("ceph_aio_complete %p rc %d\n", inode, ret);
if (ret >= 0 && aio_req->write) {
int dirty;
loff_t endoff = aio_req->iocb->ki_pos + aio_req->total_len;
if (endoff > i_size_read(inode)) {
if (ceph_inode_set_size(inode, endoff))
ceph_check_caps(ci, CHECK_CAPS_AUTHONLY, NULL);
}
spin_lock(&ci->i_ceph_lock);
ci->i_inline_version = CEPH_INLINE_NONE;
dirty = __ceph_mark_dirty_caps(ci, CEPH_CAP_FILE_WR,
&aio_req->prealloc_cf);
spin_unlock(&ci->i_ceph_lock);
if (dirty)
__mark_inode_dirty(inode, dirty);
}
ceph_put_cap_refs(ci, (aio_req->write ? CEPH_CAP_FILE_WR :
CEPH_CAP_FILE_RD));
aio_req->iocb->ki_complete(aio_req->iocb, ret, 0);
ceph_free_cap_flush(aio_req->prealloc_cf);
kfree(aio_req);
}
libceph: drop msg argument from ceph_osdc_callback_t finish_read(), its only user, uses it to get to hdr.data_len, which is what ->r_result is set to on success. This gains us the ability to safely call callbacks from contexts other than reply, e.g. map check. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-04-28 22:07:24 +08:00
static void ceph_aio_complete_req(struct ceph_osd_request *req)
ceph: Asynchronous IO support The basic idea of AIO support is simple, just call kiocb::ki_complete() in OSD request's complete callback. But there are several special cases. when IO span multiple objects, we need to wait until all OSD requests are complete, then call kiocb::ki_complete(). Error handling in this case is tricky too. For simplify, AIO both span multiple objects and extends i_size are not allowed. Another special case is check EOF for reading (other client can write to the file and extend i_size concurrently). For simplify, the direct-IO/AIO code path does do the check, fallback to normal syn read instead. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-23 21:23:38 +08:00
{
int rc = req->r_result;
struct inode *inode = req->r_inode;
struct ceph_aio_request *aio_req = req->r_priv;
struct ceph_osd_data *osd_data = osd_req_op_extent_osd_data(req, 0);
int num_pages = calc_pages_for((u64)osd_data->alignment,
osd_data->length);
dout("ceph_aio_complete_req %p rc %d bytes %llu\n",
inode, rc, osd_data->length);
if (rc == -EOLDSNAPC) {
ceph: re-send AIO write request when getting -EOLDSNAP error When receiving -EOLDSNAP from OSD, we need to re-send corresponding write request. Due to locking issue, we can send new request inside another OSD request's complete callback. So we use worker to re-send request for AIO write. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-24 08:44:20 +08:00
struct ceph_aio_work *aio_work;
BUG_ON(!aio_req->write);
aio_work = kmalloc(sizeof(*aio_work), GFP_NOFS);
if (aio_work) {
INIT_WORK(&aio_work->work, ceph_aio_retry_work);
aio_work->req = req;
queue_work(ceph_inode_to_client(inode)->wb_wq,
&aio_work->work);
return;
}
rc = -ENOMEM;
} else if (!aio_req->write) {
ceph: Asynchronous IO support The basic idea of AIO support is simple, just call kiocb::ki_complete() in OSD request's complete callback. But there are several special cases. when IO span multiple objects, we need to wait until all OSD requests are complete, then call kiocb::ki_complete(). Error handling in this case is tricky too. For simplify, AIO both span multiple objects and extends i_size are not allowed. Another special case is check EOF for reading (other client can write to the file and extend i_size concurrently). For simplify, the direct-IO/AIO code path does do the check, fallback to normal syn read instead. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-23 21:23:38 +08:00
if (rc == -ENOENT)
rc = 0;
if (rc >= 0 && osd_data->length > rc) {
int zoff = osd_data->alignment + rc;
int zlen = osd_data->length - rc;
/*
* If read is satisfied by single OSD request,
* it can pass EOF. Otherwise read is within
* i_size.
*/
if (aio_req->num_reqs == 1) {
loff_t i_size = i_size_read(inode);
loff_t endoff = aio_req->iocb->ki_pos + rc;
if (endoff < i_size)
zlen = min_t(size_t, zlen,
i_size - endoff);
aio_req->total_len = rc + zlen;
}
if (zlen > 0)
ceph_zero_page_vector_range(zoff, zlen,
osd_data->pages);
}
}
ceph: set user pages dirty after direct IO read Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-05-26 10:30:13 +08:00
ceph_put_page_vector(osd_data->pages, num_pages, !aio_req->write);
ceph: Asynchronous IO support The basic idea of AIO support is simple, just call kiocb::ki_complete() in OSD request's complete callback. But there are several special cases. when IO span multiple objects, we need to wait until all OSD requests are complete, then call kiocb::ki_complete(). Error handling in this case is tricky too. For simplify, AIO both span multiple objects and extends i_size are not allowed. Another special case is check EOF for reading (other client can write to the file and extend i_size concurrently). For simplify, the direct-IO/AIO code path does do the check, fallback to normal syn read instead. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-23 21:23:38 +08:00
ceph_osdc_put_request(req);
if (rc < 0)
cmpxchg(&aio_req->error, 0, rc);
ceph_aio_complete(inode, aio_req);
return;
}
ceph: re-send AIO write request when getting -EOLDSNAP error When receiving -EOLDSNAP from OSD, we need to re-send corresponding write request. Due to locking issue, we can send new request inside another OSD request's complete callback. So we use worker to re-send request for AIO write. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-24 08:44:20 +08:00
static void ceph_aio_retry_work(struct work_struct *work)
{
struct ceph_aio_work *aio_work =
container_of(work, struct ceph_aio_work, work);
struct ceph_osd_request *orig_req = aio_work->req;
struct ceph_aio_request *aio_req = orig_req->r_priv;
struct inode *inode = orig_req->r_inode;
struct ceph_inode_info *ci = ceph_inode(inode);
struct ceph_snap_context *snapc;
struct ceph_osd_request *req;
int ret;
spin_lock(&ci->i_ceph_lock);
if (__ceph_have_pending_cap_snap(ci)) {
struct ceph_cap_snap *capsnap =
list_last_entry(&ci->i_cap_snaps,
struct ceph_cap_snap,
ci_item);
snapc = ceph_get_snap_context(capsnap->context);
} else {
BUG_ON(!ci->i_head_snapc);
snapc = ceph_get_snap_context(ci->i_head_snapc);
}
spin_unlock(&ci->i_ceph_lock);
req = ceph_osdc_alloc_request(orig_req->r_osdc, snapc, 2,
false, GFP_NOFS);
ceph: checking for IS_ERR instead of NULL ceph_osdc_alloc_request() returns NULL on error, it never returns error pointers. Fixes: 5be0389dac66 ('ceph: re-send AIO write request when getting -EOLDSNAP error') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-01-26 17:24:44 +08:00
if (!req) {
ret = -ENOMEM;
ceph: re-send AIO write request when getting -EOLDSNAP error When receiving -EOLDSNAP from OSD, we need to re-send corresponding write request. Due to locking issue, we can send new request inside another OSD request's complete callback. So we use worker to re-send request for AIO write. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-24 08:44:20 +08:00
req = orig_req;
goto out;
}
libceph, rbd, ceph: WRITE | ONDISK -> WRITE CEPH_OSD_FLAG_ONDISK is set in account_request(). Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com>
2017-02-12 01:48:41 +08:00
req->r_flags = CEPH_OSD_FLAG_ORDERSNAP | CEPH_OSD_FLAG_WRITE;
libceph: introduce ceph_osd_request_target, calc_target() Introduce ceph_osd_request_target, containing all mapping-related fields of ceph_osd_request and calc_target() for calculating mappings and populating it. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-04-28 22:07:23 +08:00
ceph_oloc_copy(&req->r_base_oloc, &orig_req->r_base_oloc);
libceph: variable-sized ceph_object_id Currently ceph_object_id can hold object names of up to 100 (CEPH_MAX_OID_NAME_LEN) characters. This is enough for all use cases, expect one - long rbd image names: - a format 1 header is named "<imgname>.rbd" - an object that points to a format 2 header is named "rbd_id.<imgname>" We operate on these potentially long-named objects during rbd map, and, for format 1 images, during header refresh. (A format 2 header name is a small system-generated string.) Lift this 100 character limit by making ceph_object_id be able to point to an externally-allocated string. Apart from being able to work with almost arbitrarily-long named objects, this allows us to reduce the size of ceph_object_id from >100 bytes to 64 bytes. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-04-30 01:54:20 +08:00
ceph_oid_copy(&req->r_base_oid, &orig_req->r_base_oid);
ceph: re-send AIO write request when getting -EOLDSNAP error When receiving -EOLDSNAP from OSD, we need to re-send corresponding write request. Due to locking issue, we can send new request inside another OSD request's complete callback. So we use worker to re-send request for AIO write. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-24 08:44:20 +08:00
libceph: move message allocation out of ceph_osdc_alloc_request() The size of ->r_request and ->r_reply messages depends on the size of the object name (ceph_object_id), while the size of ceph_osd_request is fixed. Move message allocation into a separate function that would have to be called after ceph_object_id and ceph_object_locator (which is also going to become variable in size with RADOS namespaces) have been filled in: req = ceph_osdc_alloc_request(...); <fill in req->r_base_oid> <fill in req->r_base_oloc> ceph_osdc_alloc_messages(req); Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-04-27 20:15:51 +08:00
ret = ceph_osdc_alloc_messages(req, GFP_NOFS);
if (ret) {
ceph_osdc_put_request(req);
req = orig_req;
goto out;
}
ceph: re-send AIO write request when getting -EOLDSNAP error When receiving -EOLDSNAP from OSD, we need to re-send corresponding write request. Due to locking issue, we can send new request inside another OSD request's complete callback. So we use worker to re-send request for AIO write. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-24 08:44:20 +08:00
req->r_ops[0] = orig_req->r_ops[0];
osd_req_op_init(req, 1, CEPH_OSD_OP_STARTSYNC, 0);
libceph: switch to calc_target(), part 2 The crux of this is getting rid of ceph_osdc_build_request(), so that MOSDOp can be encoded not before but after calc_target() calculates the actual target. Encoding now happens within ceph_osdc_start_request(). Also nuked is the accompanying bunch of pointers into the encoded buffer that was used to update fields on each send - instead, the entire front is re-encoded. If we want to support target->name_len != base->name_len in the future, there is no other way, because oid is surrounded by other fields in the encoded buffer. Encoding OSD ops and adding data items to the request message were mixed together in osd_req_encode_op(). While we want to re-encode OSD ops, we don't want to add duplicate data items to the message when resending, so all call to ceph_osdc_msg_data_add() are factored out into a new setup_request_data(). Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 06:29:52 +08:00
req->r_mtime = aio_req->mtime;
req->r_data_offset = req->r_ops[0].extent.offset;
ceph: re-send AIO write request when getting -EOLDSNAP error When receiving -EOLDSNAP from OSD, we need to re-send corresponding write request. Due to locking issue, we can send new request inside another OSD request's complete callback. So we use worker to re-send request for AIO write. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-24 08:44:20 +08:00
ceph_osdc_put_request(orig_req);
req->r_callback = ceph_aio_complete_req;
req->r_inode = inode;
req->r_priv = aio_req;
libceph: allow requests to return immediately on full conditions if caller wishes Usually, when the osd map is flagged as full or the pool is at quota, write requests just hang. This is not what we want for cephfs, where it would be better to simply report -ENOSPC back to userland instead of stalling. If the caller knows that it will want an immediate error return instead of blocking on a full or at-quota error condition then allow it to set a flag to request that behavior. Set that flag in ceph_osdc_new_request (since ceph.ko is the only caller), and on any other write request from ceph.ko. A later patch will deal with requests that were submitted before the new map showing the full condition came in. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-04-04 20:39:37 +08:00
req->r_abort_on_full = true;
ceph: re-send AIO write request when getting -EOLDSNAP error When receiving -EOLDSNAP from OSD, we need to re-send corresponding write request. Due to locking issue, we can send new request inside another OSD request's complete callback. So we use worker to re-send request for AIO write. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-24 08:44:20 +08:00
ret = ceph_osdc_start_request(req->r_osdc, req, false);
out:
if (ret < 0) {
req->r_result = ret;
libceph: drop msg argument from ceph_osdc_callback_t finish_read(), its only user, uses it to get to hdr.data_len, which is what ->r_result is set to on success. This gains us the ability to safely call callbacks from contexts other than reply, e.g. map check. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-04-28 22:07:24 +08:00
ceph_aio_complete_req(req);
ceph: re-send AIO write request when getting -EOLDSNAP error When receiving -EOLDSNAP from OSD, we need to re-send corresponding write request. Due to locking issue, we can send new request inside another OSD request's complete callback. So we use worker to re-send request for AIO write. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-24 08:44:20 +08:00
}
ceph: fix snap context leak in error path Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-01-26 23:05:37 +08:00
ceph_put_snap_context(snapc);
ceph: re-send AIO write request when getting -EOLDSNAP error When receiving -EOLDSNAP from OSD, we need to re-send corresponding write request. Due to locking issue, we can send new request inside another OSD request's complete callback. So we use worker to re-send request for AIO write. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-24 08:44:20 +08:00
kfree(aio_work);
}
ceph: Implement writev/pwritev for sync operation. For writev/pwritev sync-operatoin, ceph only do the first iov. I divided the write-sync-operation into two functions. One for direct-write, other for none-direct-sync-write. This is because for none-direct-sync-write we can merge iovs to one. But for direct-write, we can't merge iovs. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-09-12 13:54:26 +08:00
static ssize_t
ceph: Asynchronous IO support The basic idea of AIO support is simple, just call kiocb::ki_complete() in OSD request's complete callback. But there are several special cases. when IO span multiple objects, we need to wait until all OSD requests are complete, then call kiocb::ki_complete(). Error handling in this case is tricky too. For simplify, AIO both span multiple objects and extends i_size are not allowed. Another special case is check EOF for reading (other client can write to the file and extend i_size concurrently). For simplify, the direct-IO/AIO code path does do the check, fallback to normal syn read instead. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-23 21:23:38 +08:00
ceph_direct_read_write(struct kiocb *iocb, struct iov_iter *iter,
struct ceph_snap_context *snapc,
struct ceph_cap_flush **pcf)
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
{
ceph: Implement writev/pwritev for sync operation. For writev/pwritev sync-operatoin, ceph only do the first iov. I divided the write-sync-operation into two functions. One for direct-write, other for none-direct-sync-write. This is because for none-direct-sync-write we can merge iovs to one. But for direct-write, we can't merge iovs. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-09-12 13:54:26 +08:00
struct file *file = iocb->ki_filp;
new helper: file_inode(file) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-01-24 06:07:38 +08:00
struct inode *inode = file_inode(file);
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
struct ceph_inode_info *ci = ceph_inode(inode);
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
struct ceph_fs_client *fsc = ceph_inode_to_client(inode);
libceph: don't build request in ceph_osdc_new_request() This patch moves the call to ceph_osdc_build_request() out of ceph_osdc_new_request() and into its caller. This is in order to defer formatting osd operation information into the request message until just before request is started. The only unusual (ab)user of ceph_osdc_build_request() is ceph_writepages_start(), where the final length of write request may change (downward) based on the current inode size or the oldest snapshot context with dirty data for the inode. The remaining callers don't change anything in the request after has been built. This means the ops array is now supplied by the caller. It also means there is no need to pass the mtime to ceph_osdc_new_request() (it gets provided to ceph_osdc_build_request()). And rather than passing a do_sync flag, have the number of ops in the ops array supplied imply adding a second STARTSYNC operation after the READ or WRITE requested. This and some of the patches that follow are related to having the messenger (only) be responsible for filling the content of the message header, as described here: http://tracker.ceph.com/issues/4589 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-03-15 03:09:05 +08:00
struct ceph_vino vino;
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
struct ceph_osd_request *req;
struct page **pages;
ceph: Asynchronous IO support The basic idea of AIO support is simple, just call kiocb::ki_complete() in OSD request's complete callback. But there are several special cases. when IO span multiple objects, we need to wait until all OSD requests are complete, then call kiocb::ki_complete(). Error handling in this case is tricky too. For simplify, AIO both span multiple objects and extends i_size are not allowed. Another special case is check EOF for reading (other client can write to the file and extend i_size concurrently). For simplify, the direct-IO/AIO code path does do the check, fallback to normal syn read instead. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-23 21:23:38 +08:00
struct ceph_aio_request *aio_req = NULL;
int num_pages = 0;
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
int flags;
int ret;
fs: Replace current_fs_time() with current_time() current_fs_time() uses struct super_block* as an argument. As per Linus's suggestion, this is changed to take struct inode* as a parameter instead. This is because the function is primarily meant for vfs inode timestamps. Also the function was renamed as per Arnd's suggestion. Change all calls to current_fs_time() to use the new current_time() function instead. current_fs_time() will be deleted. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-09-14 22:48:06 +08:00
struct timespec mtime = current_time(inode);
ceph: Asynchronous IO support The basic idea of AIO support is simple, just call kiocb::ki_complete() in OSD request's complete callback. But there are several special cases. when IO span multiple objects, we need to wait until all OSD requests are complete, then call kiocb::ki_complete(). Error handling in this case is tricky too. For simplify, AIO both span multiple objects and extends i_size are not allowed. Another special case is check EOF for reading (other client can write to the file and extend i_size concurrently). For simplify, the direct-IO/AIO code path does do the check, fallback to normal syn read instead. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-23 21:23:38 +08:00
size_t count = iov_iter_count(iter);
loff_t pos = iocb->ki_pos;
bool write = iov_iter_rw(iter) == WRITE;
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
ceph: Asynchronous IO support The basic idea of AIO support is simple, just call kiocb::ki_complete() in OSD request's complete callback. But there are several special cases. when IO span multiple objects, we need to wait until all OSD requests are complete, then call kiocb::ki_complete(). Error handling in this case is tricky too. For simplify, AIO both span multiple objects and extends i_size are not allowed. Another special case is check EOF for reading (other client can write to the file and extend i_size concurrently). For simplify, the direct-IO/AIO code path does do the check, fallback to normal syn read instead. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-23 21:23:38 +08:00
if (write && ceph_snap(file_inode(file)) != CEPH_NOSNAP)
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
return -EROFS;
ceph: Asynchronous IO support The basic idea of AIO support is simple, just call kiocb::ki_complete() in OSD request's complete callback. But there are several special cases. when IO span multiple objects, we need to wait until all OSD requests are complete, then call kiocb::ki_complete(). Error handling in this case is tricky too. For simplify, AIO both span multiple objects and extends i_size are not allowed. Another special case is check EOF for reading (other client can write to the file and extend i_size concurrently). For simplify, the direct-IO/AIO code path does do the check, fallback to normal syn read instead. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-23 21:23:38 +08:00
dout("sync_direct_read_write (%s) on file %p %lld~%u\n",
(write ? "write" : "read"), file, pos, (unsigned)count);
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
ceph: Implement writev/pwritev for sync operation. For writev/pwritev sync-operatoin, ceph only do the first iov. I divided the write-sync-operation into two functions. One for direct-write, other for none-direct-sync-write. This is because for none-direct-sync-write we can merge iovs to one. But for direct-write, we can't merge iovs. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-09-12 13:54:26 +08:00
ret = filemap_write_and_wait_range(inode->i_mapping, pos, pos + count);
ceph: sync read/write considers page cache In the cases where we either do a sync read or a write, we need to make sure that everything in the page cache is flushed. In the case of a sync write we invalidate the relevant pages, so that subsequent read/write reflects the new data written. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-10 03:14:41 +08:00
if (ret < 0)
return ret;
ceph: Asynchronous IO support The basic idea of AIO support is simple, just call kiocb::ki_complete() in OSD request's complete callback. But there are several special cases. when IO span multiple objects, we need to wait until all OSD requests are complete, then call kiocb::ki_complete(). Error handling in this case is tricky too. For simplify, AIO both span multiple objects and extends i_size are not allowed. Another special case is check EOF for reading (other client can write to the file and extend i_size concurrently). For simplify, the direct-IO/AIO code path does do the check, fallback to normal syn read instead. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-23 21:23:38 +08:00
if (write) {
ceph: ignore error from invalidate_inode_pages2_range() in direct write This call can fail if there are dirty pages. The preceding call to filemap_write_and_wait_range() will normally remove dirty pages, but as inode_lock() is not held over calls to ceph_direct_read_write(), it could race with non-direct writes and pages could be dirtied immediately after filemap_write_and_wait_range() returns If there are dirty pages, they will be removed by the subsequent call to truncate_inode_pages_range(), so having them here is not a problem. If the 'ret' value is left holding an error, then in the async IO case (aio_req is not NULL) the loop that would normally call ceph_osdc_start_request() will see the error in 'ret' and abort all requests. This doesn't seem like correct behaviour. So use separate 'ret2' instead of overloading 'ret'. Signed-off-by: NeilBrown <neilb@suse.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com>
2016-09-01 22:26:23 +08:00
int ret2 = invalidate_inode_pages2_range(inode->i_mapping,
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
pos >> PAGE_SHIFT,
(pos + count) >> PAGE_SHIFT);
ceph: ignore error from invalidate_inode_pages2_range() in direct write This call can fail if there are dirty pages. The preceding call to filemap_write_and_wait_range() will normally remove dirty pages, but as inode_lock() is not held over calls to ceph_direct_read_write(), it could race with non-direct writes and pages could be dirtied immediately after filemap_write_and_wait_range() returns If there are dirty pages, they will be removed by the subsequent call to truncate_inode_pages_range(), so having them here is not a problem. If the 'ret' value is left holding an error, then in the async IO case (aio_req is not NULL) the loop that would normally call ceph_osdc_start_request() will see the error in 'ret' and abort all requests. This doesn't seem like correct behaviour. So use separate 'ret2' instead of overloading 'ret'. Signed-off-by: NeilBrown <neilb@suse.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com>
2016-09-01 22:26:23 +08:00
if (ret2 < 0)
ceph: fix printing wrong return variable in ceph_direct_read_write() Fix printing wrong return variable for invalidate_inode_pages2_range in ceph_direct_read_write(). Signed-off-by: Zhi Zhang <zhang.david2011@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-11-08 21:35:59 +08:00
dout("invalidate_inode_pages2_range returned %d\n", ret2);
ceph: sync read/write considers page cache In the cases where we either do a sync read or a write, we need to make sure that everything in the page cache is flushed. In the case of a sync write we invalidate the relevant pages, so that subsequent read/write reflects the new data written. Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-10 03:14:41 +08:00
libceph, rbd, ceph: WRITE | ONDISK -> WRITE CEPH_OSD_FLAG_ONDISK is set in account_request(). Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com>
2017-02-12 01:48:41 +08:00
flags = CEPH_OSD_FLAG_ORDERSNAP | CEPH_OSD_FLAG_WRITE;
ceph: Asynchronous IO support The basic idea of AIO support is simple, just call kiocb::ki_complete() in OSD request's complete callback. But there are several special cases. when IO span multiple objects, we need to wait until all OSD requests are complete, then call kiocb::ki_complete(). Error handling in this case is tricky too. For simplify, AIO both span multiple objects and extends i_size are not allowed. Another special case is check EOF for reading (other client can write to the file and extend i_size concurrently). For simplify, the direct-IO/AIO code path does do the check, fallback to normal syn read instead. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-23 21:23:38 +08:00
} else {
flags = CEPH_OSD_FLAG_READ;
}
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
ceph: Asynchronous IO support The basic idea of AIO support is simple, just call kiocb::ki_complete() in OSD request's complete callback. But there are several special cases. when IO span multiple objects, we need to wait until all OSD requests are complete, then call kiocb::ki_complete(). Error handling in this case is tricky too. For simplify, AIO both span multiple objects and extends i_size are not allowed. Another special case is check EOF for reading (other client can write to the file and extend i_size concurrently). For simplify, the direct-IO/AIO code path does do the check, fallback to normal syn read instead. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-23 21:23:38 +08:00
while (iov_iter_count(iter) > 0) {
u64 size = dio_get_pagev_size(iter);
size_t start = 0;
ssize_t len;
ceph: Implement writev/pwritev for sync operation. For writev/pwritev sync-operatoin, ceph only do the first iov. I divided the write-sync-operation into two functions. One for direct-write, other for none-direct-sync-write. This is because for none-direct-sync-write we can merge iovs to one. But for direct-write, we can't merge iovs. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-09-12 13:54:26 +08:00
vino = ceph_vino(inode);
req = ceph_osdc_new_request(&fsc->client->osdc, &ci->i_layout,
ceph: Asynchronous IO support The basic idea of AIO support is simple, just call kiocb::ki_complete() in OSD request's complete callback. But there are several special cases. when IO span multiple objects, we need to wait until all OSD requests are complete, then call kiocb::ki_complete(). Error handling in this case is tricky too. For simplify, AIO both span multiple objects and extends i_size are not allowed. Another special case is check EOF for reading (other client can write to the file and extend i_size concurrently). For simplify, the direct-IO/AIO code path does do the check, fallback to normal syn read instead. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-23 21:23:38 +08:00
vino, pos, &size, 0,
/*include a 'startsync' command*/
write ? 2 : 1,
write ? CEPH_OSD_OP_WRITE :
CEPH_OSD_OP_READ,
flags, snapc,
ceph: Implement writev/pwritev for sync operation. For writev/pwritev sync-operatoin, ceph only do the first iov. I divided the write-sync-operation into two functions. One for direct-write, other for none-direct-sync-write. This is because for none-direct-sync-write we can merge iovs to one. But for direct-write, we can't merge iovs. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-09-12 13:54:26 +08:00
ci->i_truncate_seq,
ci->i_truncate_size,
false);
if (IS_ERR(req)) {
ret = PTR_ERR(req);
ceph_sync_{,direct_}write: fix an oops on ceph_osdc_new_request() failure ceph_osdc_put_request(ERR_PTR(-error)) oopses. What we want there is break, not goto out. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-04 10:44:19 +08:00
break;
ceph: Implement writev/pwritev for sync operation. For writev/pwritev sync-operatoin, ceph only do the first iov. I divided the write-sync-operation into two functions. One for direct-write, other for none-direct-sync-write. This is because for none-direct-sync-write we can merge iovs to one. But for direct-write, we can't merge iovs. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-09-12 13:54:26 +08:00
}
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
ceph: Asynchronous IO support The basic idea of AIO support is simple, just call kiocb::ki_complete() in OSD request's complete callback. But there are several special cases. when IO span multiple objects, we need to wait until all OSD requests are complete, then call kiocb::ki_complete(). Error handling in this case is tricky too. For simplify, AIO both span multiple objects and extends i_size are not allowed. Another special case is check EOF for reading (other client can write to the file and extend i_size concurrently). For simplify, the direct-IO/AIO code path does do the check, fallback to normal syn read instead. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-23 21:23:38 +08:00
len = size;
pages = dio_get_pages_alloc(iter, len, &start, &num_pages);
ceph: combine as many iovec as possile into one OSD request Both ceph_sync_direct_write and ceph_sync_read iterate iovec elements one by one, send one OSD request for each iovec. This is sub-optimal, We can combine serveral iovec into one page vector, and send an OSD request for the whole page vector. Signed-off-by: Zhu, Caifeng <zhucaifeng@unissoft-nj.com> Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-10-08 15:26:15 +08:00
if (IS_ERR(pages)) {
ceph_sync_direct_write: stop poking into iov_iter guts all needed primitives are there... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-04 10:58:25 +08:00
ceph_osdc_put_request(req);
ceph: combine as many iovec as possile into one OSD request Both ceph_sync_direct_write and ceph_sync_read iterate iovec elements one by one, send one OSD request for each iovec. This is sub-optimal, We can combine serveral iovec into one page vector, and send an OSD request for the whole page vector. Signed-off-by: Zhu, Caifeng <zhucaifeng@unissoft-nj.com> Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-10-08 15:26:15 +08:00
ret = PTR_ERR(pages);
ceph_sync_direct_write: stop poking into iov_iter guts all needed primitives are there... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-04 10:58:25 +08:00
break;
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
}
/*
ceph: Asynchronous IO support The basic idea of AIO support is simple, just call kiocb::ki_complete() in OSD request's complete callback. But there are several special cases. when IO span multiple objects, we need to wait until all OSD requests are complete, then call kiocb::ki_complete(). Error handling in this case is tricky too. For simplify, AIO both span multiple objects and extends i_size are not allowed. Another special case is check EOF for reading (other client can write to the file and extend i_size concurrently). For simplify, the direct-IO/AIO code path does do the check, fallback to normal syn read instead. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-23 21:23:38 +08:00
* To simplify error handling, allow AIO when IO within i_size
* or IO can be satisfied by single OSD request.
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
*/
ceph: Asynchronous IO support The basic idea of AIO support is simple, just call kiocb::ki_complete() in OSD request's complete callback. But there are several special cases. when IO span multiple objects, we need to wait until all OSD requests are complete, then call kiocb::ki_complete(). Error handling in this case is tricky too. For simplify, AIO both span multiple objects and extends i_size are not allowed. Another special case is check EOF for reading (other client can write to the file and extend i_size concurrently). For simplify, the direct-IO/AIO code path does do the check, fallback to normal syn read instead. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-23 21:23:38 +08:00
if (pos == iocb->ki_pos && !is_sync_kiocb(iocb) &&
(len == count || pos + count <= i_size_read(inode))) {
aio_req = kzalloc(sizeof(*aio_req), GFP_KERNEL);
if (aio_req) {
aio_req->iocb = iocb;
aio_req->write = write;
INIT_LIST_HEAD(&aio_req->osd_reqs);
if (write) {
ceph: re-send AIO write request when getting -EOLDSNAP error When receiving -EOLDSNAP from OSD, we need to re-send corresponding write request. Due to locking issue, we can send new request inside another OSD request's complete callback. So we use worker to re-send request for AIO write. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-24 08:44:20 +08:00
aio_req->mtime = mtime;
ceph: Asynchronous IO support The basic idea of AIO support is simple, just call kiocb::ki_complete() in OSD request's complete callback. But there are several special cases. when IO span multiple objects, we need to wait until all OSD requests are complete, then call kiocb::ki_complete(). Error handling in this case is tricky too. For simplify, AIO both span multiple objects and extends i_size are not allowed. Another special case is check EOF for reading (other client can write to the file and extend i_size concurrently). For simplify, the direct-IO/AIO code path does do the check, fallback to normal syn read instead. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-23 21:23:38 +08:00
swap(aio_req->prealloc_cf, *pcf);
}
}
/* ignore error */
}
if (write) {
/*
* throw out any page cache pages in this range. this
* may block.
*/
truncate_inode_pages_range(inode->i_mapping, pos,
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
(pos+len) | (PAGE_SIZE - 1));
ceph: Asynchronous IO support The basic idea of AIO support is simple, just call kiocb::ki_complete() in OSD request's complete callback. But there are several special cases. when IO span multiple objects, we need to wait until all OSD requests are complete, then call kiocb::ki_complete(). Error handling in this case is tricky too. For simplify, AIO both span multiple objects and extends i_size are not allowed. Another special case is check EOF for reading (other client can write to the file and extend i_size concurrently). For simplify, the direct-IO/AIO code path does do the check, fallback to normal syn read instead. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-23 21:23:38 +08:00
osd_req_op_init(req, 1, CEPH_OSD_OP_STARTSYNC, 0);
libceph: switch to calc_target(), part 2 The crux of this is getting rid of ceph_osdc_build_request(), so that MOSDOp can be encoded not before but after calc_target() calculates the actual target. Encoding now happens within ceph_osdc_start_request(). Also nuked is the accompanying bunch of pointers into the encoded buffer that was used to update fields on each send - instead, the entire front is re-encoded. If we want to support target->name_len != base->name_len in the future, there is no other way, because oid is surrounded by other fields in the encoded buffer. Encoding OSD ops and adding data items to the request message were mixed together in osd_req_encode_op(). While we want to re-encode OSD ops, we don't want to add duplicate data items to the message when resending, so all call to ceph_osdc_msg_data_add() are factored out into a new setup_request_data(). Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 06:29:52 +08:00
req->r_mtime = mtime;
ceph: Asynchronous IO support The basic idea of AIO support is simple, just call kiocb::ki_complete() in OSD request's complete callback. But there are several special cases. when IO span multiple objects, we need to wait until all OSD requests are complete, then call kiocb::ki_complete(). Error handling in this case is tricky too. For simplify, AIO both span multiple objects and extends i_size are not allowed. Another special case is check EOF for reading (other client can write to the file and extend i_size concurrently). For simplify, the direct-IO/AIO code path does do the check, fallback to normal syn read instead. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-23 21:23:38 +08:00
}
osd_req_op_extent_osd_data_pages(req, 0, pages, len, start,
false, false);
ceph: Implement writev/pwritev for sync operation. For writev/pwritev sync-operatoin, ceph only do the first iov. I divided the write-sync-operation into two functions. One for direct-write, other for none-direct-sync-write. This is because for none-direct-sync-write we can merge iovs to one. But for direct-write, we can't merge iovs. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-09-12 13:54:26 +08:00
ceph: Asynchronous IO support The basic idea of AIO support is simple, just call kiocb::ki_complete() in OSD request's complete callback. But there are several special cases. when IO span multiple objects, we need to wait until all OSD requests are complete, then call kiocb::ki_complete(). Error handling in this case is tricky too. For simplify, AIO both span multiple objects and extends i_size are not allowed. Another special case is check EOF for reading (other client can write to the file and extend i_size concurrently). For simplify, the direct-IO/AIO code path does do the check, fallback to normal syn read instead. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-23 21:23:38 +08:00
if (aio_req) {
aio_req->total_len += len;
aio_req->num_reqs++;
atomic_inc(&aio_req->pending_reqs);
req->r_callback = ceph_aio_complete_req;
req->r_inode = inode;
req->r_priv = aio_req;
list_add_tail(&req->r_unsafe_item, &aio_req->osd_reqs);
pos += len;
iov_iter_advance(iter, len);
continue;
}
ret = ceph_osdc_start_request(req->r_osdc, req, false);
ceph: Implement writev/pwritev for sync operation. For writev/pwritev sync-operatoin, ceph only do the first iov. I divided the write-sync-operation into two functions. One for direct-write, other for none-direct-sync-write. This is because for none-direct-sync-write we can merge iovs to one. But for direct-write, we can't merge iovs. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-09-12 13:54:26 +08:00
if (!ret)
ret = ceph_osdc_wait_request(&fsc->client->osdc, req);
ceph: Asynchronous IO support The basic idea of AIO support is simple, just call kiocb::ki_complete() in OSD request's complete callback. But there are several special cases. when IO span multiple objects, we need to wait until all OSD requests are complete, then call kiocb::ki_complete(). Error handling in this case is tricky too. For simplify, AIO both span multiple objects and extends i_size are not allowed. Another special case is check EOF for reading (other client can write to the file and extend i_size concurrently). For simplify, the direct-IO/AIO code path does do the check, fallback to normal syn read instead. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-23 21:23:38 +08:00
size = i_size_read(inode);
if (!write) {
if (ret == -ENOENT)
ret = 0;
if (ret >= 0 && ret < len && pos + ret < size) {
int zlen = min_t(size_t, len - ret,
size - pos - ret);
ceph_zero_page_vector_range(start + ret, zlen,
pages);
ret += zlen;
}
if (ret >= 0)
len = ret;
}
ceph: set user pages dirty after direct IO read Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-05-26 10:30:13 +08:00
ceph_put_page_vector(pages, num_pages, !write);
ceph: Implement writev/pwritev for sync operation. For writev/pwritev sync-operatoin, ceph only do the first iov. I divided the write-sync-operation into two functions. One for direct-write, other for none-direct-sync-write. This is because for none-direct-sync-write we can merge iovs to one. But for direct-write, we can't merge iovs. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-09-12 13:54:26 +08:00
ceph_osdc_put_request(req);
ceph: Asynchronous IO support The basic idea of AIO support is simple, just call kiocb::ki_complete() in OSD request's complete callback. But there are several special cases. when IO span multiple objects, we need to wait until all OSD requests are complete, then call kiocb::ki_complete(). Error handling in this case is tricky too. For simplify, AIO both span multiple objects and extends i_size are not allowed. Another special case is check EOF for reading (other client can write to the file and extend i_size concurrently). For simplify, the direct-IO/AIO code path does do the check, fallback to normal syn read instead. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-23 21:23:38 +08:00
if (ret < 0)
ceph: Implement writev/pwritev for sync operation. For writev/pwritev sync-operatoin, ceph only do the first iov. I divided the write-sync-operation into two functions. One for direct-write, other for none-direct-sync-write. This is because for none-direct-sync-write we can merge iovs to one. But for direct-write, we can't merge iovs. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-09-12 13:54:26 +08:00
break;
ceph_sync_direct_write: stop poking into iov_iter guts all needed primitives are there... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-04 10:58:25 +08:00
ceph: Asynchronous IO support The basic idea of AIO support is simple, just call kiocb::ki_complete() in OSD request's complete callback. But there are several special cases. when IO span multiple objects, we need to wait until all OSD requests are complete, then call kiocb::ki_complete(). Error handling in this case is tricky too. For simplify, AIO both span multiple objects and extends i_size are not allowed. Another special case is check EOF for reading (other client can write to the file and extend i_size concurrently). For simplify, the direct-IO/AIO code path does do the check, fallback to normal syn read instead. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-23 21:23:38 +08:00
pos += len;
iov_iter_advance(iter, len);
if (!write && pos >= size)
ceph: Implement writev/pwritev for sync operation. For writev/pwritev sync-operatoin, ceph only do the first iov. I divided the write-sync-operation into two functions. One for direct-write, other for none-direct-sync-write. This is because for none-direct-sync-write we can merge iovs to one. But for direct-write, we can't merge iovs. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-09-12 13:54:26 +08:00
break;
ceph_sync_direct_write: stop poking into iov_iter guts all needed primitives are there... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-04 10:58:25 +08:00
ceph: Asynchronous IO support The basic idea of AIO support is simple, just call kiocb::ki_complete() in OSD request's complete callback. But there are several special cases. when IO span multiple objects, we need to wait until all OSD requests are complete, then call kiocb::ki_complete(). Error handling in this case is tricky too. For simplify, AIO both span multiple objects and extends i_size are not allowed. Another special case is check EOF for reading (other client can write to the file and extend i_size concurrently). For simplify, the direct-IO/AIO code path does do the check, fallback to normal syn read instead. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-23 21:23:38 +08:00
if (write && pos > size) {
if (ceph_inode_set_size(inode, pos))
ceph_sync_direct_write: stop poking into iov_iter guts all needed primitives are there... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-04 10:58:25 +08:00
ceph_check_caps(ceph_inode(inode),
CHECK_CAPS_AUTHONLY,
NULL);
}
ceph: Implement writev/pwritev for sync operation. For writev/pwritev sync-operatoin, ceph only do the first iov. I divided the write-sync-operation into two functions. One for direct-write, other for none-direct-sync-write. This is because for none-direct-sync-write we can merge iovs to one. But for direct-write, we can't merge iovs. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-09-12 13:54:26 +08:00
}
ceph: Asynchronous IO support The basic idea of AIO support is simple, just call kiocb::ki_complete() in OSD request's complete callback. But there are several special cases. when IO span multiple objects, we need to wait until all OSD requests are complete, then call kiocb::ki_complete(). Error handling in this case is tricky too. For simplify, AIO both span multiple objects and extends i_size are not allowed. Another special case is check EOF for reading (other client can write to the file and extend i_size concurrently). For simplify, the direct-IO/AIO code path does do the check, fallback to normal syn read instead. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-23 21:23:38 +08:00
if (aio_req) {
ceph: fix use-after-free bug in ceph_direct_read_write() ceph_aio_complete() can free the ceph_aio_request struct before the code exits the while loop. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-06-14 11:13:59 +08:00
LIST_HEAD(osd_reqs);
ceph: Asynchronous IO support The basic idea of AIO support is simple, just call kiocb::ki_complete() in OSD request's complete callback. But there are several special cases. when IO span multiple objects, we need to wait until all OSD requests are complete, then call kiocb::ki_complete(). Error handling in this case is tricky too. For simplify, AIO both span multiple objects and extends i_size are not allowed. Another special case is check EOF for reading (other client can write to the file and extend i_size concurrently). For simplify, the direct-IO/AIO code path does do the check, fallback to normal syn read instead. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-23 21:23:38 +08:00
if (aio_req->num_reqs == 0) {
kfree(aio_req);
return ret;
}
ceph_get_cap_refs(ci, write ? CEPH_CAP_FILE_WR :
CEPH_CAP_FILE_RD);
ceph: fix use-after-free bug in ceph_direct_read_write() ceph_aio_complete() can free the ceph_aio_request struct before the code exits the while loop. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-06-14 11:13:59 +08:00
list_splice(&aio_req->osd_reqs, &osd_reqs);
while (!list_empty(&osd_reqs)) {
req = list_first_entry(&osd_reqs,
ceph: Asynchronous IO support The basic idea of AIO support is simple, just call kiocb::ki_complete() in OSD request's complete callback. But there are several special cases. when IO span multiple objects, we need to wait until all OSD requests are complete, then call kiocb::ki_complete(). Error handling in this case is tricky too. For simplify, AIO both span multiple objects and extends i_size are not allowed. Another special case is check EOF for reading (other client can write to the file and extend i_size concurrently). For simplify, the direct-IO/AIO code path does do the check, fallback to normal syn read instead. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-23 21:23:38 +08:00
struct ceph_osd_request,
r_unsafe_item);
list_del_init(&req->r_unsafe_item);
if (ret >= 0)
ret = ceph_osdc_start_request(req->r_osdc,
req, false);
if (ret < 0) {
req->r_result = ret;
libceph: drop msg argument from ceph_osdc_callback_t finish_read(), its only user, uses it to get to hdr.data_len, which is what ->r_result is set to on success. This gains us the ability to safely call callbacks from contexts other than reply, e.g. map check. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-04-28 22:07:24 +08:00
ceph_aio_complete_req(req);
ceph: Asynchronous IO support The basic idea of AIO support is simple, just call kiocb::ki_complete() in OSD request's complete callback. But there are several special cases. when IO span multiple objects, we need to wait until all OSD requests are complete, then call kiocb::ki_complete(). Error handling in this case is tricky too. For simplify, AIO both span multiple objects and extends i_size are not allowed. Another special case is check EOF for reading (other client can write to the file and extend i_size concurrently). For simplify, the direct-IO/AIO code path does do the check, fallback to normal syn read instead. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-23 21:23:38 +08:00
}
}
return -EIOCBQUEUED;
}
if (ret != -EOLDSNAPC && pos > iocb->ki_pos) {
ret = pos - iocb->ki_pos;
ceph: Implement writev/pwritev for sync operation. For writev/pwritev sync-operatoin, ceph only do the first iov. I divided the write-sync-operation into two functions. One for direct-write, other for none-direct-sync-write. This is because for none-direct-sync-write we can merge iovs to one. But for direct-write, we can't merge iovs. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-09-12 13:54:26 +08:00
iocb->ki_pos = pos;
}
return ret;
}
/*
* Synchronous write, straight from __user pointer or user pages.
*
* If write spans object boundary, just do multiple writes. (For a
* correct atomic write, we should e.g. take write locks on all
* objects, rollback on failure, etc.)
*/
ceph: fix append mode write generic_write_checks() may update 'pos', so we need to pass 'pos' to ceph_sync_write() and ceph_sync_direct_write(); Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2014-07-28 14:33:46 +08:00
static ssize_t
ceph: set i_head_snapc when getting CEPH_CAP_FILE_WR reference In most cases that snap context is needed, we are holding reference of CEPH_CAP_FILE_WR. So we can set ceph inode's i_head_snapc when getting the CEPH_CAP_FILE_WR reference, and make codes get snap context from i_head_snapc. This makes the code simpler. Another benefit of this change is that we can handle snap notification more elegantly. Especially when snap context is updated while someone else is doing write. The old queue cap_snap code may set cap_snap's context to ether the old context or the new snap context, depending on if i_head_snapc is set. The new queue capp_snap code always set cap_snap's context to the old snap context. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-04-30 14:40:54 +08:00
ceph_sync_write(struct kiocb *iocb, struct iov_iter *from, loff_t pos,
struct ceph_snap_context *snapc)
ceph: Implement writev/pwritev for sync operation. For writev/pwritev sync-operatoin, ceph only do the first iov. I divided the write-sync-operation into two functions. One for direct-write, other for none-direct-sync-write. This is because for none-direct-sync-write we can merge iovs to one. But for direct-write, we can't merge iovs. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-09-12 13:54:26 +08:00
{
struct file *file = iocb->ki_filp;
struct inode *inode = file_inode(file);
struct ceph_inode_info *ci = ceph_inode(inode);
struct ceph_fs_client *fsc = ceph_inode_to_client(inode);
struct ceph_vino vino;
struct ceph_osd_request *req;
struct page **pages;
u64 len;
int num_pages;
int written = 0;
int flags;
int check_caps = 0;
int ret;
fs: Replace current_fs_time() with current_time() current_fs_time() uses struct super_block* as an argument. As per Linus's suggestion, this is changed to take struct inode* as a parameter instead. This is because the function is primarily meant for vfs inode timestamps. Also the function was renamed as per Arnd's suggestion. Change all calls to current_fs_time() to use the new current_time() function instead. current_fs_time() will be deleted. Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-09-14 22:48:06 +08:00
struct timespec mtime = current_time(inode);
ceph: switch to ->write_iter() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-04 11:09:01 +08:00
size_t count = iov_iter_count(from);
ceph: Implement writev/pwritev for sync operation. For writev/pwritev sync-operatoin, ceph only do the first iov. I divided the write-sync-operation into two functions. One for direct-write, other for none-direct-sync-write. This is because for none-direct-sync-write we can merge iovs to one. But for direct-write, we can't merge iovs. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-09-12 13:54:26 +08:00
if (ceph_snap(file_inode(file)) != CEPH_NOSNAP)
return -EROFS;
dout("sync_write on file %p %lld~%u\n", file, pos, (unsigned)count);
ret = filemap_write_and_wait_range(inode->i_mapping, pos, pos + count);
if (ret < 0)
return ret;
ret = invalidate_inode_pages2_range(inode->i_mapping,
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
pos >> PAGE_SHIFT,
(pos + count) >> PAGE_SHIFT);
ceph: Implement writev/pwritev for sync operation. For writev/pwritev sync-operatoin, ceph only do the first iov. I divided the write-sync-operation into two functions. One for direct-write, other for none-direct-sync-write. This is because for none-direct-sync-write we can merge iovs to one. But for direct-write, we can't merge iovs. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-09-12 13:54:26 +08:00
if (ret < 0)
dout("invalidate_inode_pages2_range returned %d\n", ret);
libceph, rbd, ceph: WRITE | ONDISK -> WRITE CEPH_OSD_FLAG_ONDISK is set in account_request(). Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com>
2017-02-12 01:48:41 +08:00
flags = CEPH_OSD_FLAG_ORDERSNAP | CEPH_OSD_FLAG_WRITE;
ceph: Implement writev/pwritev for sync operation. For writev/pwritev sync-operatoin, ceph only do the first iov. I divided the write-sync-operation into two functions. One for direct-write, other for none-direct-sync-write. This is because for none-direct-sync-write we can merge iovs to one. But for direct-write, we can't merge iovs. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-09-12 13:54:26 +08:00
ceph: switch to ->write_iter() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-04 11:09:01 +08:00
while ((len = iov_iter_count(from)) > 0) {
ceph: Implement writev/pwritev for sync operation. For writev/pwritev sync-operatoin, ceph only do the first iov. I divided the write-sync-operation into two functions. One for direct-write, other for none-direct-sync-write. This is because for none-direct-sync-write we can merge iovs to one. But for direct-write, we can't merge iovs. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-09-12 13:54:26 +08:00
size_t left;
int n;
vino = ceph_vino(inode);
req = ceph_osdc_new_request(&fsc->client->osdc, &ci->i_layout,
libceph: specify position of extent operation allow specifying position of extent operation in multi-operations osd request. This is required for cephfs to convert inline data to normal data (compare xattr, then write object). Signed-off-by: Yan, Zheng <zyan@redhat.com> Reviewed-by: Ilya Dryomov <idryomov@redhat.com>
2014-11-13 14:40:37 +08:00
vino, pos, &len, 0, 1,
ceph: Implement writev/pwritev for sync operation. For writev/pwritev sync-operatoin, ceph only do the first iov. I divided the write-sync-operation into two functions. One for direct-write, other for none-direct-sync-write. This is because for none-direct-sync-write we can merge iovs to one. But for direct-write, we can't merge iovs. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-09-12 13:54:26 +08:00
CEPH_OSD_OP_WRITE, flags, snapc,
ci->i_truncate_seq,
ci->i_truncate_size,
false);
if (IS_ERR(req)) {
ret = PTR_ERR(req);
ceph_sync_{,direct_}write: fix an oops on ceph_osdc_new_request() failure ceph_osdc_put_request(ERR_PTR(-error)) oopses. What we want there is break, not goto out. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-04 10:44:19 +08:00
break;
ceph: Implement writev/pwritev for sync operation. For writev/pwritev sync-operatoin, ceph only do the first iov. I divided the write-sync-operation into two functions. One for direct-write, other for none-direct-sync-write. This is because for none-direct-sync-write we can merge iovs to one. But for direct-write, we can't merge iovs. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-09-12 13:54:26 +08:00
}
/*
* write from beginning of first page,
* regardless of io alignment
*/
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
num_pages = (len + PAGE_SIZE - 1) >> PAGE_SHIFT;
ceph: Implement writev/pwritev for sync operation. For writev/pwritev sync-operatoin, ceph only do the first iov. I divided the write-sync-operation into two functions. One for direct-write, other for none-direct-sync-write. This is because for none-direct-sync-write we can merge iovs to one. But for direct-write, we can't merge iovs. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-09-12 13:54:26 +08:00
ceph: switch some GFP_NOFS memory allocation to GFP_KERNEL GFP_NOFS memory allocation is required for page writeback path. But there is no need to use GFP_NOFS in syscall path and readpage path Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-06-13 17:27:05 +08:00
pages = ceph_alloc_page_vector(num_pages, GFP_KERNEL);
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
if (IS_ERR(pages)) {
ret = PTR_ERR(pages);
goto out;
}
ceph: Implement writev/pwritev for sync operation. For writev/pwritev sync-operatoin, ceph only do the first iov. I divided the write-sync-operation into two functions. One for direct-write, other for none-direct-sync-write. This is because for none-direct-sync-write we can merge iovs to one. But for direct-write, we can't merge iovs. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-09-12 13:54:26 +08:00
left = len;
for (n = 0; n < num_pages; n++) {
ceph: cast PAGE_SIZE to size_t in ceph_sync_write() Use min_t(size_t, ...) instead of plain min(), which does strict type checking, to avoid compile warning on i386. Cc: Jianpeng Ma <majianpeng@gmail.com> Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2014-01-29 01:16:18 +08:00
size_t plen = min_t(size_t, left, PAGE_SIZE);
ceph: switch to ->write_iter() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-04 11:09:01 +08:00
ret = copy_page_from_iter(pages[n], 0, plen, from);
ceph: Implement writev/pwritev for sync operation. For writev/pwritev sync-operatoin, ceph only do the first iov. I divided the write-sync-operation into two functions. One for direct-write, other for none-direct-sync-write. This is because for none-direct-sync-write we can merge iovs to one. But for direct-write, we can't merge iovs. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-09-12 13:54:26 +08:00
if (ret != plen) {
ret = -EFAULT;
break;
}
left -= ret;
}
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
if (ret < 0) {
ceph_release_page_vector(pages, num_pages);
goto out;
}
ceph: Implement writev/pwritev for sync operation. For writev/pwritev sync-operatoin, ceph only do the first iov. I divided the write-sync-operation into two functions. One for direct-write, other for none-direct-sync-write. This is because for none-direct-sync-write we can merge iovs to one. But for direct-write, we can't merge iovs. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-09-12 13:54:26 +08:00
req->r_inode = inode;
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
ceph: Implement writev/pwritev for sync operation. For writev/pwritev sync-operatoin, ceph only do the first iov. I divided the write-sync-operation into two functions. One for direct-write, other for none-direct-sync-write. This is because for none-direct-sync-write we can merge iovs to one. But for direct-write, we can't merge iovs. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-09-12 13:54:26 +08:00
osd_req_op_extent_osd_data_pages(req, 0, pages, len, 0,
false, true);
libceph: hold off building osd request Defer building the osd request until just before submitting it in all callers except ceph_writepages_start(). (That caller will be handed in the next patch.) Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-03-15 03:09:06 +08:00
libceph: switch to calc_target(), part 2 The crux of this is getting rid of ceph_osdc_build_request(), so that MOSDOp can be encoded not before but after calc_target() calculates the actual target. Encoding now happens within ceph_osdc_start_request(). Also nuked is the accompanying bunch of pointers into the encoded buffer that was used to update fields on each send - instead, the entire front is re-encoded. If we want to support target->name_len != base->name_len in the future, there is no other way, because oid is surrounded by other fields in the encoded buffer. Encoding OSD ops and adding data items to the request message were mixed together in osd_req_encode_op(). While we want to re-encode OSD ops, we don't want to add duplicate data items to the message when resending, so all call to ceph_osdc_msg_data_add() are factored out into a new setup_request_data(). Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 06:29:52 +08:00
req->r_mtime = mtime;
ceph: Implement writev/pwritev for sync operation. For writev/pwritev sync-operatoin, ceph only do the first iov. I divided the write-sync-operation into two functions. One for direct-write, other for none-direct-sync-write. This is because for none-direct-sync-write we can merge iovs to one. But for direct-write, we can't merge iovs. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-09-12 13:54:26 +08:00
ret = ceph_osdc_start_request(&fsc->client->osdc, req, false);
if (!ret)
ret = ceph_osdc_wait_request(&fsc->client->osdc, req);
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
out:
ceph: Implement writev/pwritev for sync operation. For writev/pwritev sync-operatoin, ceph only do the first iov. I divided the write-sync-operation into two functions. One for direct-write, other for none-direct-sync-write. This is because for none-direct-sync-write we can merge iovs to one. But for direct-write, we can't merge iovs. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-09-12 13:54:26 +08:00
ceph_osdc_put_request(req);
ceph: when seeing write errors on an inode, switch to sync writes Currently, we don't have a real feedback mechanism in place for when we start seeing buffered writeback errors. If writeback is failing, there is nothing that prevents an application from continuing to dirty pages that aren't being cleaned. In the event that we're seeing write errors of any sort occur on an inode, have the callback set a flag to force further writes to be synchronous. When the next write succeeds, clear the flag to allow buffered writeback to continue. Since this is just a hint to the write submission mechanism, we only take the i_ceph_lock when a lockless check shows that the flag needs to be changed. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: "Yan, Zheng” <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-04-04 20:39:46 +08:00
if (ret != 0) {
ceph_set_error_write(ci);
ceph: Implement writev/pwritev for sync operation. For writev/pwritev sync-operatoin, ceph only do the first iov. I divided the write-sync-operation into two functions. One for direct-write, other for none-direct-sync-write. This is because for none-direct-sync-write we can merge iovs to one. But for direct-write, we can't merge iovs. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-09-12 13:54:26 +08:00
break;
ceph: when seeing write errors on an inode, switch to sync writes Currently, we don't have a real feedback mechanism in place for when we start seeing buffered writeback errors. If writeback is failing, there is nothing that prevents an application from continuing to dirty pages that aren't being cleaned. In the event that we're seeing write errors of any sort occur on an inode, have the callback set a flag to force further writes to be synchronous. When the next write succeeds, clear the flag to allow buffered writeback to continue. Since this is just a hint to the write submission mechanism, we only take the i_ceph_lock when a lockless check shows that the flag needs to be changed. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: "Yan, Zheng” <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-04-04 20:39:46 +08:00
}
ceph_clear_error_write(ci);
pos += len;
written += len;
if (pos > i_size_read(inode)) {
check_caps = ceph_inode_set_size(inode, pos);
if (check_caps)
ceph_check_caps(ceph_inode(inode),
CHECK_CAPS_AUTHONLY,
NULL);
}
ceph: Implement writev/pwritev for sync operation. For writev/pwritev sync-operatoin, ceph only do the first iov. I divided the write-sync-operation into two functions. One for direct-write, other for none-direct-sync-write. This is because for none-direct-sync-write we can merge iovs to one. But for direct-write, we can't merge iovs. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-09-12 13:54:26 +08:00
}
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
ceph: Implement writev/pwritev for sync operation. For writev/pwritev sync-operatoin, ceph only do the first iov. I divided the write-sync-operation into two functions. One for direct-write, other for none-direct-sync-write. This is because for none-direct-sync-write we can merge iovs to one. But for direct-write, we can't merge iovs. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-09-12 13:54:26 +08:00
if (ret != -EOLDSNAPC && written > 0) {
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
ret = written;
ceph: Implement writev/pwritev for sync operation. For writev/pwritev sync-operatoin, ceph only do the first iov. I divided the write-sync-operation into two functions. One for direct-write, other for none-direct-sync-write. This is because for none-direct-sync-write we can merge iovs to one. But for direct-write, we can't merge iovs. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-09-12 13:54:26 +08:00
iocb->ki_pos = pos;
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
}
return ret;
}
/*
* Wrap generic_file_aio_read with checks for cap bits on the inode.
* Atomically grab references, so that those bits are not released
* back to the MDS mid-read.
*
* Hmm, the sync read case isn't actually async... should it be?
*/
ceph: switch to ->read_iter() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-03 08:28:01 +08:00
static ssize_t ceph_read_iter(struct kiocb *iocb, struct iov_iter *to)
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
{
struct file *filp = iocb->ki_filp;
ceph: perform lazy reads when file mode and caps permit If the file mode is marked as "lazy," perform cached/buffered reads when the caps permit it. Adjust the rdcache_gen and invalidation logic accordingly so that we manage our cache based on the FILE_CACHE -or- FILE_LAZYIO cap bits. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-28 01:40:43 +08:00
struct ceph_file_info *fi = filp->private_data;
fs: remove ki_nbytes There is no need to pass the total request length in the kiocb, as we already get passed in through the iov_iter argument. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-02-12 02:56:46 +08:00
size_t len = iov_iter_count(to);
new helper: file_inode(file) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-01-24 06:07:38 +08:00
struct inode *inode = file_inode(filp);
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
struct ceph_inode_info *ci = ceph_inode(inode);
ceph: fetch inline data when getting Fcr cap refs we can't use getattr to fetch inline data after getting Fcr caps, because it can cause deadlock. The solution is try bringing inline data to page cache when not holding any cap, and hope the inline data page is still there after getting the Fcr caps. If the page is still there, pin it in page cache for later IO. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-11-14 22:10:07 +08:00
struct page *pinned_page = NULL;
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
ssize_t ret;
ceph: perform lazy reads when file mode and caps permit If the file mode is marked as "lazy," perform cached/buffered reads when the caps permit it. Adjust the rdcache_gen and invalidation logic accordingly so that we manage our cache based on the FILE_CACHE -or- FILE_LAZYIO cap bits. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-28 01:40:43 +08:00
int want, got = 0;
ceph: sync read inline data we can't use getattr to fetch inline data while holding Fr cap, because it can cause deadlock. If we need to sync read inline data, drop cap refs first, then use getattr to fetch inline data. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-11-14 22:36:18 +08:00
int retry_op = 0, read = 0;
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
ceph: fix sync read eof check deadlock If a sync read gets a short result from the OSD, it may need to do a getattr to see if it is short due to reaching end-of-file. The getattr was being done while holding a reference to FILE_RD, which can lead to a deadlock if the MDS is revoking that capability bit and can't process the getattr until it does. We fix this by setting a flag if EOF size validation is needed, and doing the getattr in ceph_aio_read, after the RD cap ref is dropped. If the read needs to be continued, we loop and continue traversing the file. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-10 06:04:02 +08:00
again:
ceph: implement readv/preadv for sync operation For readv/preadv sync-operatoin, ceph only do the first iov. Now implement this. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
2013-09-26 14:42:17 +08:00
dout("aio_read %p %llx.%llx %llu~%u trying to get caps on %p\n",
inode, ceph_vinop(inode), iocb->ki_pos, (unsigned)len, inode);
ceph: perform lazy reads when file mode and caps permit If the file mode is marked as "lazy," perform cached/buffered reads when the caps permit it. Adjust the rdcache_gen and invalidation logic accordingly so that we manage our cache based on the FILE_CACHE -or- FILE_LAZYIO cap bits. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-28 01:40:43 +08:00
if (fi->fmode & CEPH_FILE_MODE_LAZY)
want = CEPH_CAP_FILE_CACHE | CEPH_CAP_FILE_LAZYIO;
else
want = CEPH_CAP_FILE_CACHE;
ceph: fetch inline data when getting Fcr cap refs we can't use getattr to fetch inline data after getting Fcr caps, because it can cause deadlock. The solution is try bringing inline data to page cache when not holding any cap, and hope the inline data page is still there after getting the Fcr caps. If the page is still there, pin it in page cache for later IO. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-11-14 22:10:07 +08:00
ret = ceph_get_caps(ci, CEPH_CAP_FILE_RD, want, -1, &got, &pinned_page);
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
if (ret < 0)
ceph: implement readv/preadv for sync operation For readv/preadv sync-operatoin, ceph only do the first iov. Now implement this. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
2013-09-26 14:42:17 +08:00
return ret;
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
ceph: perform lazy reads when file mode and caps permit If the file mode is marked as "lazy," perform cached/buffered reads when the caps permit it. Adjust the rdcache_gen and invalidation logic accordingly so that we manage our cache based on the FILE_CACHE -or- FILE_LAZYIO cap bits. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-28 01:40:43 +08:00
if ((got & (CEPH_CAP_FILE_CACHE|CEPH_CAP_FILE_LAZYIO)) == 0 ||
mirror O_APPEND and O_DIRECT into iocb->ki_flags ... avoiding write_iter/fcntl races. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-10 01:52:01 +08:00
(iocb->ki_flags & IOCB_DIRECT) ||
ceph: implement readv/preadv for sync operation For readv/preadv sync-operatoin, ceph only do the first iov. Now implement this. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
2013-09-26 14:42:17 +08:00
(fi->flags & CEPH_F_SYNC)) {
dout("aio_sync_read %p %llx.%llx %llu~%u got cap refs on %s\n",
inode, ceph_vinop(inode), iocb->ki_pos, (unsigned)len,
ceph_cap_string(got));
ceph: sync read inline data we can't use getattr to fetch inline data while holding Fr cap, because it can cause deadlock. If we need to sync read inline data, drop cap refs first, then use getattr to fetch inline data. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-11-14 22:36:18 +08:00
if (ci->i_inline_version == CEPH_INLINE_NONE) {
ceph: Asynchronous IO support The basic idea of AIO support is simple, just call kiocb::ki_complete() in OSD request's complete callback. But there are several special cases. when IO span multiple objects, we need to wait until all OSD requests are complete, then call kiocb::ki_complete(). Error handling in this case is tricky too. For simplify, AIO both span multiple objects and extends i_size are not allowed. Another special case is check EOF for reading (other client can write to the file and extend i_size concurrently). For simplify, the direct-IO/AIO code path does do the check, fallback to normal syn read instead. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-23 21:23:38 +08:00
if (!retry_op && (iocb->ki_flags & IOCB_DIRECT)) {
ret = ceph_direct_read_write(iocb, to,
NULL, NULL);
if (ret >= 0 && ret < len)
retry_op = CHECK_EOF;
} else {
ret = ceph_sync_read(iocb, to, &retry_op);
}
ceph: sync read inline data we can't use getattr to fetch inline data while holding Fr cap, because it can cause deadlock. If we need to sync read inline data, drop cap refs first, then use getattr to fetch inline data. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-11-14 22:36:18 +08:00
} else {
retry_op = READ_INLINE;
}
ceph: implement readv/preadv for sync operation For readv/preadv sync-operatoin, ceph only do the first iov. Now implement this. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
2013-09-26 14:42:17 +08:00
} else {
dout("aio_read %p %llx.%llx %llu~%u got cap refs on %s\n",
ceph: switch to ->read_iter() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-03 08:28:01 +08:00
inode, ceph_vinop(inode), iocb->ki_pos, (unsigned)len,
ceph: implement readv/preadv for sync operation For readv/preadv sync-operatoin, ceph only do the first iov. Now implement this. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
2013-09-26 14:42:17 +08:00
ceph_cap_string(got));
ceph: try getting buffer capability for readahead/fadvise For readahead/fadvise cases, caller of ceph_readpages does not hold buffer capability. Pages can be added to page cache while there is no buffer capability. This can cause data integrity issue. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-10-25 10:51:55 +08:00
current->journal_info = filp;
ceph: switch to ->read_iter() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-03 08:28:01 +08:00
ret = generic_file_read_iter(iocb, to);
ceph: try getting buffer capability for readahead/fadvise For readahead/fadvise cases, caller of ceph_readpages does not hold buffer capability. Pages can be added to page cache while there is no buffer capability. This can cause data integrity issue. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-10-25 10:51:55 +08:00
current->journal_info = NULL;
ceph: implement readv/preadv for sync operation For readv/preadv sync-operatoin, ceph only do the first iov. Now implement this. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
2013-09-26 14:42:17 +08:00
}
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
dout("aio_read %p %llx.%llx dropping cap refs on %s = %d\n",
inode, ceph_vinop(inode), ceph_cap_string(got), (int)ret);
ceph: fetch inline data when getting Fcr cap refs we can't use getattr to fetch inline data after getting Fcr caps, because it can cause deadlock. The solution is try bringing inline data to page cache when not holding any cap, and hope the inline data page is still there after getting the Fcr caps. If the page is still there, pin it in page cache for later IO. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-11-14 22:10:07 +08:00
if (pinned_page) {
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
put_page(pinned_page);
ceph: fetch inline data when getting Fcr cap refs we can't use getattr to fetch inline data after getting Fcr caps, because it can cause deadlock. The solution is try bringing inline data to page cache when not holding any cap, and hope the inline data page is still there after getting the Fcr caps. If the page is still there, pin it in page cache for later IO. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-11-14 22:10:07 +08:00
pinned_page = NULL;
}
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
ceph_put_cap_refs(ci, got);
ceph: Asynchronous IO support The basic idea of AIO support is simple, just call kiocb::ki_complete() in OSD request's complete callback. But there are several special cases. when IO span multiple objects, we need to wait until all OSD requests are complete, then call kiocb::ki_complete(). Error handling in this case is tricky too. For simplify, AIO both span multiple objects and extends i_size are not allowed. Another special case is check EOF for reading (other client can write to the file and extend i_size concurrently). For simplify, the direct-IO/AIO code path does do the check, fallback to normal syn read instead. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-23 21:23:38 +08:00
if (retry_op > HAVE_RETRIED && ret >= 0) {
ceph: sync read inline data we can't use getattr to fetch inline data while holding Fr cap, because it can cause deadlock. If we need to sync read inline data, drop cap refs first, then use getattr to fetch inline data. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-11-14 22:36:18 +08:00
int statret;
struct page *page = NULL;
loff_t i_size;
if (retry_op == READ_INLINE) {
ceph: switch some GFP_NOFS memory allocation to GFP_KERNEL GFP_NOFS memory allocation is required for page writeback path. But there is no need to use GFP_NOFS in syscall path and readpage path Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-06-13 17:27:05 +08:00
page = __page_cache_alloc(GFP_KERNEL);
ceph: sync read inline data we can't use getattr to fetch inline data while holding Fr cap, because it can cause deadlock. If we need to sync read inline data, drop cap refs first, then use getattr to fetch inline data. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-11-14 22:36:18 +08:00
if (!page)
return -ENOMEM;
}
ceph: fix sync read eof check deadlock If a sync read gets a short result from the OSD, it may need to do a getattr to see if it is short due to reaching end-of-file. The getattr was being done while holding a reference to FILE_RD, which can lead to a deadlock if the MDS is revoking that capability bit and can't process the getattr until it does. We fix this by setting a flag if EOF size validation is needed, and doing the getattr in ceph_aio_read, after the RD cap ref is dropped. If the read needs to be continued, we loop and continue traversing the file. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-10 06:04:02 +08:00
ceph: sync read inline data we can't use getattr to fetch inline data while holding Fr cap, because it can cause deadlock. If we need to sync read inline data, drop cap refs first, then use getattr to fetch inline data. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-11-14 22:36:18 +08:00
statret = __ceph_do_getattr(inode, page,
CEPH_STAT_CAP_INLINE_DATA, !!page);
if (statret < 0) {
ceph: fix error handling in ceph_read_iter In case __ceph_do_getattr returns an error and the retry_op in ceph_read_iter is not READ_INLINE, then it's possible to invoke __free_page on a page which is NULL, this naturally leads to a crash. This can happen when, for example, a process waiting on a MDS reply receives sigterm. Fix this by explicitly checking whether the page is set or not. Cc: stable@vger.kernel.org # 3.19+ Signed-off-by: Nikolay Borisov <kernel@kyup.com> Reviewed-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-10-10 20:38:18 +08:00
if (page)
__free_page(page);
ceph: sync read inline data we can't use getattr to fetch inline data while holding Fr cap, because it can cause deadlock. If we need to sync read inline data, drop cap refs first, then use getattr to fetch inline data. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-11-14 22:36:18 +08:00
if (statret == -ENODATA) {
BUG_ON(retry_op != READ_INLINE);
goto again;
}
return statret;
}
ceph: fix sync read eof check deadlock If a sync read gets a short result from the OSD, it may need to do a getattr to see if it is short due to reaching end-of-file. The getattr was being done while holding a reference to FILE_RD, which can lead to a deadlock if the MDS is revoking that capability bit and can't process the getattr until it does. We fix this by setting a flag if EOF size validation is needed, and doing the getattr in ceph_aio_read, after the RD cap ref is dropped. If the read needs to be continued, we loop and continue traversing the file. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-10 06:04:02 +08:00
ceph: sync read inline data we can't use getattr to fetch inline data while holding Fr cap, because it can cause deadlock. If we need to sync read inline data, drop cap refs first, then use getattr to fetch inline data. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-11-14 22:36:18 +08:00
i_size = i_size_read(inode);
if (retry_op == READ_INLINE) {
ceph: fix reading inline data when i_size > PAGE_SIZE when inode has inline data but its size > PAGE_SIZE (it was truncated to larger size), previous direct read code return -EIO. This patch adds code to return zeros for data whose offset > PAGE_SIZE. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-01-10 11:43:12 +08:00
BUG_ON(ret > 0 || read > 0);
if (iocb->ki_pos < i_size &&
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
iocb->ki_pos < PAGE_SIZE) {
ceph: sync read inline data we can't use getattr to fetch inline data while holding Fr cap, because it can cause deadlock. If we need to sync read inline data, drop cap refs first, then use getattr to fetch inline data. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-11-14 22:36:18 +08:00
loff_t end = min_t(loff_t, i_size,
iocb->ki_pos + len);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
end = min_t(loff_t, end, PAGE_SIZE);
ceph: sync read inline data we can't use getattr to fetch inline data while holding Fr cap, because it can cause deadlock. If we need to sync read inline data, drop cap refs first, then use getattr to fetch inline data. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-11-14 22:36:18 +08:00
if (statret < end)
zero_user_segment(page, statret, end);
ret = copy_page_to_iter(page,
iocb->ki_pos & ~PAGE_MASK,
end - iocb->ki_pos, to);
iocb->ki_pos += ret;
ceph: fix reading inline data when i_size > PAGE_SIZE when inode has inline data but its size > PAGE_SIZE (it was truncated to larger size), previous direct read code return -EIO. This patch adds code to return zeros for data whose offset > PAGE_SIZE. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-01-10 11:43:12 +08:00
read += ret;
}
if (iocb->ki_pos < i_size && read < len) {
size_t zlen = min_t(size_t, len - read,
i_size - iocb->ki_pos);
ret = iov_iter_zero(zlen, to);
iocb->ki_pos += ret;
read += ret;
ceph: sync read inline data we can't use getattr to fetch inline data while holding Fr cap, because it can cause deadlock. If we need to sync read inline data, drop cap refs first, then use getattr to fetch inline data. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-11-14 22:36:18 +08:00
}
__free_pages(page, 0);
ceph: fix reading inline data when i_size > PAGE_SIZE when inode has inline data but its size > PAGE_SIZE (it was truncated to larger size), previous direct read code return -EIO. This patch adds code to return zeros for data whose offset > PAGE_SIZE. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-01-10 11:43:12 +08:00
return read;
ceph: sync read inline data we can't use getattr to fetch inline data while holding Fr cap, because it can cause deadlock. If we need to sync read inline data, drop cap refs first, then use getattr to fetch inline data. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-11-14 22:36:18 +08:00
}
ceph: fix sync read eof check deadlock If a sync read gets a short result from the OSD, it may need to do a getattr to see if it is short due to reaching end-of-file. The getattr was being done while holding a reference to FILE_RD, which can lead to a deadlock if the MDS is revoking that capability bit and can't process the getattr until it does. We fix this by setting a flag if EOF size validation is needed, and doing the getattr in ceph_aio_read, after the RD cap ref is dropped. If the read needs to be continued, we loop and continue traversing the file. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-10 06:04:02 +08:00
/* hit EOF or hole? */
ceph: sync read inline data we can't use getattr to fetch inline data while holding Fr cap, because it can cause deadlock. If we need to sync read inline data, drop cap refs first, then use getattr to fetch inline data. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-11-14 22:36:18 +08:00
if (retry_op == CHECK_EOF && iocb->ki_pos < i_size &&
ceph: fix reading inline data when i_size > PAGE_SIZE when inode has inline data but its size > PAGE_SIZE (it was truncated to larger size), previous direct read code return -EIO. This patch adds code to return zeros for data whose offset > PAGE_SIZE. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-01-10 11:43:12 +08:00
ret < len) {
ceph: implement readv/preadv for sync operation For readv/preadv sync-operatoin, ceph only do the first iov. Now implement this. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
2013-09-26 14:42:17 +08:00
dout("sync_read hit hole, ppos %lld < size %lld"
ceph: use i_size_{read,write} to get/set i_size Cap message from MDS can update i_size. In that case, we don't hold i_mutex. So it's unsafe to directly access inode->i_size while holding i_mutex. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-30 11:32:46 +08:00
", reading more\n", iocb->ki_pos, i_size);
ceph: implement readv/preadv for sync operation For readv/preadv sync-operatoin, ceph only do the first iov. Now implement this. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
2013-09-26 14:42:17 +08:00
ceph: fix sync read eof check deadlock If a sync read gets a short result from the OSD, it may need to do a getattr to see if it is short due to reaching end-of-file. The getattr was being done while holding a reference to FILE_RD, which can lead to a deadlock if the MDS is revoking that capability bit and can't process the getattr until it does. We fix this by setting a flag if EOF size validation is needed, and doing the getattr in ceph_aio_read, after the RD cap ref is dropped. If the read needs to be continued, we loop and continue traversing the file. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-10 06:04:02 +08:00
read += ret;
len -= ret;
ceph: Asynchronous IO support The basic idea of AIO support is simple, just call kiocb::ki_complete() in OSD request's complete callback. But there are several special cases. when IO span multiple objects, we need to wait until all OSD requests are complete, then call kiocb::ki_complete(). Error handling in this case is tricky too. For simplify, AIO both span multiple objects and extends i_size are not allowed. Another special case is check EOF for reading (other client can write to the file and extend i_size concurrently). For simplify, the direct-IO/AIO code path does do the check, fallback to normal syn read instead. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-23 21:23:38 +08:00
retry_op = HAVE_RETRIED;
ceph: fix sync read eof check deadlock If a sync read gets a short result from the OSD, it may need to do a getattr to see if it is short due to reaching end-of-file. The getattr was being done while holding a reference to FILE_RD, which can lead to a deadlock if the MDS is revoking that capability bit and can't process the getattr until it does. We fix this by setting a flag if EOF size validation is needed, and doing the getattr in ceph_aio_read, after the RD cap ref is dropped. If the read needs to be continued, we loop and continue traversing the file. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-10 06:04:02 +08:00
goto again;
}
}
ceph: implement readv/preadv for sync operation For readv/preadv sync-operatoin, ceph only do the first iov. Now implement this. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com>
2013-09-26 14:42:17 +08:00
ceph: fix sync read eof check deadlock If a sync read gets a short result from the OSD, it may need to do a getattr to see if it is short due to reaching end-of-file. The getattr was being done while holding a reference to FILE_RD, which can lead to a deadlock if the MDS is revoking that capability bit and can't process the getattr until it does. We fix this by setting a flag if EOF size validation is needed, and doing the getattr in ceph_aio_read, after the RD cap ref is dropped. If the read needs to be continued, we loop and continue traversing the file. Signed-off-by: Sage Weil <sage@newdream.net>
2010-02-10 06:04:02 +08:00
if (ret >= 0)
ret += read;
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
return ret;
}
/*
* Take cap references to avoid releasing caps to MDS mid-write.
*
* If we are synchronous, and write with an old snap context, the OSD
* may return EOLDSNAPC. In that case, retry the write.. _after_
* dropping our cap refs and allowing the pending snap to logically
* complete _before_ this write occurs.
*
* If we are near ENOSPC, write synchronously.
*/
ceph: switch to ->write_iter() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-04 11:09:01 +08:00
static ssize_t ceph_write_iter(struct kiocb *iocb, struct iov_iter *from)
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
{
struct file *file = iocb->ki_filp;
ceph: perform lazy writes when file mode and caps permit If we have marked a file as "lazy" (using the ceph ioctl), perform buffered writes when the MDS caps allow it. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-27 05:31:27 +08:00
struct ceph_file_info *fi = file->private_data;
new helper: file_inode(file) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-01-24 06:07:38 +08:00
struct inode *inode = file_inode(file);
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
struct ceph_inode_info *ci = ceph_inode(inode);
ceph: factor out libceph from Ceph file system This factors out protocol and low-level storage parts of ceph into a separate libceph module living in net/ceph and include/linux/ceph. This is mostly a matter of moving files around. However, a few key pieces of the interface change as well: - ceph_client becomes ceph_fs_client and ceph_client, where the latter captures the mon and osd clients, and the fs_client gets the mds client and file system specific pieces. - Mount option parsing and debugfs setup is correspondingly broken into two pieces. - The mon client gets a generic handler callback for otherwise unknown messages (mds map, in this case). - The basic supported/required feature bits can be expanded (and are by ceph_fs_client). No functional change, aside from some subtle error handling cases that got cleaned up in the refactoring process. Signed-off-by: Sage Weil <sage@newdream.net>
2010-04-07 06:14:15 +08:00
struct ceph_osd_client *osdc =
&ceph_sb_to_client(inode->i_sb)->client->osdc;
ceph: pre-allocate data structure that tracks caps flushing Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-06-10 17:26:13 +08:00
struct ceph_cap_flush *prealloc_cf;
switch generic_write_checks() to iocb and iter ... returning -E... upon error and amount of data left in iter after (possible) truncation upon success. Note, that normal case gives a non-zero (positive) return value, so any tests for != 0 _must_ be updated. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Conflicts: fs/ext4/file.c
2015-04-10 00:55:47 +08:00
ssize_t count, written = 0;
ceph: apply write checks in ceph_aio_write copy write checks in __generic_file_aio_write to ceph_aio_write. To make these checks cover sync write path. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Alex Elder <elder@inktank.com>
2013-04-12 16:11:13 +08:00
int err, want, got;
switch generic_write_checks() to iocb and iter ... returning -E... upon error and amount of data left in iter after (possible) truncation upon success. Note, that normal case gives a non-zero (positive) return value, so any tests for != 0 _must_ be updated. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Conflicts: fs/ext4/file.c
2015-04-10 00:55:47 +08:00
loff_t pos;
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
if (ceph_snap(inode) != CEPH_NOSNAP)
return -EROFS;
ceph: pre-allocate data structure that tracks caps flushing Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-06-10 17:26:13 +08:00
prealloc_cf = ceph_alloc_cap_flush();
if (!prealloc_cf)
return -ENOMEM;
wrappers for ->i_mutex access parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested}, inode_foo(inode) being mutex_foo(&inode->i_mutex). Please, use those for access to ->i_mutex; over the coming cycle ->i_mutex will become rwsem, with ->lookup() done with it held only shared. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-23 04:40:57 +08:00
inode_lock(inode);
ceph: apply write checks in ceph_aio_write copy write checks in __generic_file_aio_write to ceph_aio_write. To make these checks cover sync write path. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Alex Elder <elder@inktank.com>
2013-04-12 16:11:13 +08:00
/* We can write back this queue in page reclaim */
fs: export inode_to_bdi and use it in favor of mapping->backing_dev_info Now that we got rid of the bdi abuse on character devices we can always use sb->s_bdi to get at the backing_dev_info for a file, except for the block device special case. Export inode_to_bdi and replace uses of mapping->backing_dev_info with it to prepare for the removal of mapping->backing_dev_info. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Tejun Heo <tj@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-01-14 17:42:36 +08:00
current->backing_dev_info = inode_to_bdi(inode);
ceph: apply write checks in ceph_aio_write copy write checks in __generic_file_aio_write to ceph_aio_write. To make these checks cover sync write path. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Alex Elder <elder@inktank.com>
2013-04-12 16:11:13 +08:00
ceph: get inode size for each append write Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-09-07 11:35:01 +08:00
if (iocb->ki_flags & IOCB_APPEND) {
err = ceph_do_getattr(inode, CEPH_STAT_CAP_SIZE, false);
if (err < 0)
goto out;
}
switch generic_write_checks() to iocb and iter ... returning -E... upon error and amount of data left in iter after (possible) truncation upon success. Note, that normal case gives a non-zero (positive) return value, so any tests for != 0 _must_ be updated. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Conflicts: fs/ext4/file.c
2015-04-10 00:55:47 +08:00
err = generic_write_checks(iocb, from);
if (err <= 0)
ceph: apply write checks in ceph_aio_write copy write checks in __generic_file_aio_write to ceph_aio_write. To make these checks cover sync write path. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Alex Elder <elder@inktank.com>
2013-04-12 16:11:13 +08:00
goto out;
switch generic_write_checks() to iocb and iter ... returning -E... upon error and amount of data left in iter after (possible) truncation upon success. Note, that normal case gives a non-zero (positive) return value, so any tests for != 0 _must_ be updated. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Conflicts: fs/ext4/file.c
2015-04-10 00:55:47 +08:00
pos = iocb->ki_pos;
count = iov_iter_count(from);
fs: Rename file_remove_suid() to file_remove_privs() file_remove_suid() is a misnomer since it removes also file capabilities stored in xattrs and sets S_NOSEC flag. Also should_remove_suid() tells something else than whether file_remove_suid() call is necessary which leads to bugs. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-05-21 22:05:53 +08:00
err = file_remove_privs(file);
ceph: apply write checks in ceph_aio_write copy write checks in __generic_file_aio_write to ceph_aio_write. To make these checks cover sync write path. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Alex Elder <elder@inktank.com>
2013-04-12 16:11:13 +08:00
if (err)
goto out;
err = file_update_time(file);
if (err)
goto out;
ceph: convert inline data to normal data before data write Before any data write, convert inline data to normal data and set i_inline_version to CEPH_INLINE_NONE. The OSD request that saves inline data to object contains 3 operations (CMPXATTR, WRITE and SETXATTR). It compares a xattr named 'inline_version' to prevent old data overwrites newer data. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-11-14 22:38:29 +08:00
if (ci->i_inline_version != CEPH_INLINE_NONE) {
err = ceph_uninline_data(file, NULL);
if (err < 0)
goto out;
}
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
retry_snap:
ceph: when seeing write errors on an inode, switch to sync writes Currently, we don't have a real feedback mechanism in place for when we start seeing buffered writeback errors. If writeback is failing, there is nothing that prevents an application from continuing to dirty pages that aren't being cleaned. In the event that we're seeing write errors of any sort occur on an inode, have the callback set a flag to force further writes to be synchronous. When the next write succeeds, clear the flag to allow buffered writeback to continue. Since this is just a hint to the write submission mechanism, we only take the i_ceph_lock when a lockless check shows that the flag needs to be changed. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: "Yan, Zheng” <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-04-04 20:39:46 +08:00
/* FIXME: not complete since it doesn't account for being at quota */
libceph: change ceph_osdmap_flag() to take osdc For the benefit of every single caller, take osdc instead of map. Also, now that osdc->osdmap can't ever be NULL, drop the check. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-04-28 22:07:25 +08:00
if (ceph_osdmap_flag(osdc, CEPH_OSDMAP_FULL)) {
ceph: apply write checks in ceph_aio_write copy write checks in __generic_file_aio_write to ceph_aio_write. To make these checks cover sync write path. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Alex Elder <elder@inktank.com>
2013-04-12 16:11:13 +08:00
err = -ENOSPC;
ceph: don't early drop Fw cap ceph_aio_write() has an optimization that marks CEPH_CAP_FILE_WR cap dirty before data is copied to page cache and inode size is updated. The optimization avoids slow cap revocation caused by balance_dirty_pages(), but introduces inode size update race. If ceph_check_caps() flushes the dirty cap before the inode size is updated, MDS can miss the new inode size. So just remove the optimization. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Greg Farnum <greg@inktank.com>
2013-03-01 10:55:39 +08:00
goto out;
}
ceph: apply write checks in ceph_aio_write copy write checks in __generic_file_aio_write to ceph_aio_write. To make these checks cover sync write path. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Alex Elder <elder@inktank.com>
2013-04-12 16:11:13 +08:00
ceph: fix printk format warnings in file.c Fix printk format warnings by using %zd for 'ssize_t' variables: fs/ceph/file.c:751:2: warning: format '%ld' expects argument of type 'long int', but argument 11 has type 'ssize_t' [-Wformat] fs/ceph/file.c:762:2: warning: format '%ld' expects argument of type 'long int', but argument 11 has type 'ssize_t' [-Wformat] Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: ceph-devel@vger.kernel.org Signed-off-by: Sage Weil <sage@inktank.com>
2013-04-20 05:20:07 +08:00
dout("aio_write %p %llx.%llx %llu~%zd getting caps. i_size %llu\n",
ceph: use i_size_{read,write} to get/set i_size Cap message from MDS can update i_size. In that case, we don't hold i_mutex. So it's unsafe to directly access inode->i_size while holding i_mutex. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-30 11:32:46 +08:00
inode, ceph_vinop(inode), pos, count, i_size_read(inode));
ceph: revert commit 22cddde104 commit 22cddde104 breaks the atomicity of write operation, it also introduces a deadlock between write and truncate. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Greg Farnum <greg@inktank.com> Conflicts: fs/ceph/addr.c
2013-05-02 12:15:58 +08:00
if (fi->fmode & CEPH_FILE_MODE_LAZY)
want = CEPH_CAP_FILE_BUFFER | CEPH_CAP_FILE_LAZYIO;
else
want = CEPH_CAP_FILE_BUFFER;
ceph: apply write checks in ceph_aio_write copy write checks in __generic_file_aio_write to ceph_aio_write. To make these checks cover sync write path. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Alex Elder <elder@inktank.com>
2013-04-12 16:11:13 +08:00
got = 0;
ceph: fetch inline data when getting Fcr cap refs we can't use getattr to fetch inline data after getting Fcr caps, because it can cause deadlock. The solution is try bringing inline data to page cache when not holding any cap, and hope the inline data page is still there after getting the Fcr caps. If the page is still there, pin it in page cache for later IO. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-11-14 22:10:07 +08:00
err = ceph_get_caps(ci, CEPH_CAP_FILE_WR, want, pos + count,
&got, NULL);
ceph: apply write checks in ceph_aio_write copy write checks in __generic_file_aio_write to ceph_aio_write. To make these checks cover sync write path. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Alex Elder <elder@inktank.com>
2013-04-12 16:11:13 +08:00
if (err < 0)
ceph: take i_mutex before getting Fw cap There is deadlock as illustrated bellow. The fix is taking i_mutex before getting Fw cap reference. write truncate MDS --------------------- -------------------- -------------- get Fw cap lock i_mutex lock i_mutex (blocked) request setattr.size -> <- revoke Fw cap Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2013-04-12 16:11:10 +08:00
goto out;
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
ceph: fix printk format warnings in file.c Fix printk format warnings by using %zd for 'ssize_t' variables: fs/ceph/file.c:751:2: warning: format '%ld' expects argument of type 'long int', but argument 11 has type 'ssize_t' [-Wformat] fs/ceph/file.c:762:2: warning: format '%ld' expects argument of type 'long int', but argument 11 has type 'ssize_t' [-Wformat] Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: ceph-devel@vger.kernel.org Signed-off-by: Sage Weil <sage@inktank.com>
2013-04-20 05:20:07 +08:00
dout("aio_write %p %llx.%llx %llu~%zd got cap refs on %s\n",
ceph: apply write checks in ceph_aio_write copy write checks in __generic_file_aio_write to ceph_aio_write. To make these checks cover sync write path. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Alex Elder <elder@inktank.com>
2013-04-12 16:11:13 +08:00
inode, ceph_vinop(inode), pos, count, ceph_cap_string(got));
ceph: revert commit 22cddde104 commit 22cddde104 breaks the atomicity of write operation, it also introduces a deadlock between write and truncate. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Greg Farnum <greg@inktank.com> Conflicts: fs/ceph/addr.c
2013-05-02 12:15:58 +08:00
if ((got & (CEPH_CAP_FILE_BUFFER|CEPH_CAP_FILE_LAZYIO)) == 0 ||
ceph: when seeing write errors on an inode, switch to sync writes Currently, we don't have a real feedback mechanism in place for when we start seeing buffered writeback errors. If writeback is failing, there is nothing that prevents an application from continuing to dirty pages that aren't being cleaned. In the event that we're seeing write errors of any sort occur on an inode, have the callback set a flag to force further writes to be synchronous. When the next write succeeds, clear the flag to allow buffered writeback to continue. Since this is just a hint to the write submission mechanism, we only take the i_ceph_lock when a lockless check shows that the flag needs to be changed. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: "Yan, Zheng” <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-04-04 20:39:46 +08:00
(iocb->ki_flags & IOCB_DIRECT) || (fi->flags & CEPH_F_SYNC) ||
(ci->i_ceph_flags & CEPH_I_ERROR_WRITE)) {
ceph: set i_head_snapc when getting CEPH_CAP_FILE_WR reference In most cases that snap context is needed, we are holding reference of CEPH_CAP_FILE_WR. So we can set ceph inode's i_head_snapc when getting the CEPH_CAP_FILE_WR reference, and make codes get snap context from i_head_snapc. This makes the code simpler. Another benefit of this change is that we can handle snap notification more elegantly. Especially when snap context is updated while someone else is doing write. The old queue cap_snap code may set cap_snap's context to ether the old context or the new snap context, depending on if i_head_snapc is set. The new queue capp_snap code always set cap_snap's context to the old snap context. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-04-30 14:40:54 +08:00
struct ceph_snap_context *snapc;
ceph: switch to ->write_iter() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-04 11:09:01 +08:00
struct iov_iter data;
wrappers for ->i_mutex access parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested}, inode_foo(inode) being mutex_foo(&inode->i_mutex). Please, use those for access to ->i_mutex; over the coming cycle ->i_mutex will become rwsem, with ->lookup() done with it held only shared. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-23 04:40:57 +08:00
inode_unlock(inode);
ceph: set i_head_snapc when getting CEPH_CAP_FILE_WR reference In most cases that snap context is needed, we are holding reference of CEPH_CAP_FILE_WR. So we can set ceph inode's i_head_snapc when getting the CEPH_CAP_FILE_WR reference, and make codes get snap context from i_head_snapc. This makes the code simpler. Another benefit of this change is that we can handle snap notification more elegantly. Especially when snap context is updated while someone else is doing write. The old queue cap_snap code may set cap_snap's context to ether the old context or the new snap context, depending on if i_head_snapc is set. The new queue capp_snap code always set cap_snap's context to the old snap context. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-04-30 14:40:54 +08:00
spin_lock(&ci->i_ceph_lock);
if (__ceph_have_pending_cap_snap(ci)) {
struct ceph_cap_snap *capsnap =
list_last_entry(&ci->i_cap_snaps,
struct ceph_cap_snap,
ci_item);
snapc = ceph_get_snap_context(capsnap->context);
} else {
BUG_ON(!ci->i_head_snapc);
snapc = ceph_get_snap_context(ci->i_head_snapc);
}
spin_unlock(&ci->i_ceph_lock);
ceph: switch to ->write_iter() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-04 11:09:01 +08:00
/* we might need to revert back to that point */
data = *from;
mirror O_APPEND and O_DIRECT into iocb->ki_flags ... avoiding write_iter/fcntl races. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-04-10 01:52:01 +08:00
if (iocb->ki_flags & IOCB_DIRECT)
ceph: Asynchronous IO support The basic idea of AIO support is simple, just call kiocb::ki_complete() in OSD request's complete callback. But there are several special cases. when IO span multiple objects, we need to wait until all OSD requests are complete, then call kiocb::ki_complete(). Error handling in this case is tricky too. For simplify, AIO both span multiple objects and extends i_size are not allowed. Another special case is check EOF for reading (other client can write to the file and extend i_size concurrently). For simplify, the direct-IO/AIO code path does do the check, fallback to normal syn read instead. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-23 21:23:38 +08:00
written = ceph_direct_read_write(iocb, &data, snapc,
&prealloc_cf);
ceph: Implement writev/pwritev for sync operation. For writev/pwritev sync-operatoin, ceph only do the first iov. I divided the write-sync-operation into two functions. One for direct-write, other for none-direct-sync-write. This is because for none-direct-sync-write we can merge iovs to one. But for direct-write, we can't merge iovs. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-09-12 13:54:26 +08:00
else
ceph: set i_head_snapc when getting CEPH_CAP_FILE_WR reference In most cases that snap context is needed, we are holding reference of CEPH_CAP_FILE_WR. So we can set ceph inode's i_head_snapc when getting the CEPH_CAP_FILE_WR reference, and make codes get snap context from i_head_snapc. This makes the code simpler. Another benefit of this change is that we can handle snap notification more elegantly. Especially when snap context is updated while someone else is doing write. The old queue cap_snap code may set cap_snap's context to ether the old context or the new snap context, depending on if i_head_snapc is set. The new queue capp_snap code always set cap_snap's context to the old snap context. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-04-30 14:40:54 +08:00
written = ceph_sync_write(iocb, &data, pos, snapc);
ceph: Move the place for EOLDSNAPC handle in ceph_aio_write to easily understand Only for ceph_sync_write, the osd can return EOLDSNAPC.so move the related codes after the call ceph_sync_write. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Sage Weil <sage@inktank.com>
2013-08-08 15:32:19 +08:00
if (written == -EOLDSNAPC) {
dout("aio_write %p %llx.%llx %llu~%u"
"got EOLDSNAPC, retrying\n",
inode, ceph_vinop(inode),
ceph: switch to ->write_iter() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-04 11:09:01 +08:00
pos, (unsigned)count);
wrappers for ->i_mutex access parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested}, inode_foo(inode) being mutex_foo(&inode->i_mutex). Please, use those for access to ->i_mutex; over the coming cycle ->i_mutex will become rwsem, with ->lookup() done with it held only shared. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-23 04:40:57 +08:00
inode_lock(inode);
ceph: Move the place for EOLDSNAPC handle in ceph_aio_write to easily understand Only for ceph_sync_write, the osd can return EOLDSNAPC.so move the related codes after the call ceph_sync_write. Signed-off-by: Jianpeng Ma <majianpeng@gmail.com> Reviewed-by: Sage Weil <sage@inktank.com>
2013-08-08 15:32:19 +08:00
goto retry_snap;
}
ceph: switch to ->write_iter() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-04 11:09:01 +08:00
if (written > 0)
iov_iter_advance(from, written);
ceph: set i_head_snapc when getting CEPH_CAP_FILE_WR reference In most cases that snap context is needed, we are holding reference of CEPH_CAP_FILE_WR. So we can set ceph inode's i_head_snapc when getting the CEPH_CAP_FILE_WR reference, and make codes get snap context from i_head_snapc. This makes the code simpler. Another benefit of this change is that we can handle snap notification more elegantly. Especially when snap context is updated while someone else is doing write. The old queue cap_snap code may set cap_snap's context to ether the old context or the new snap context, depending on if i_head_snapc is set. The new queue capp_snap code always set cap_snap's context to the old snap context. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-04-30 14:40:54 +08:00
ceph_put_snap_context(snapc);
ceph: revert commit 22cddde104 commit 22cddde104 breaks the atomicity of write operation, it also introduces a deadlock between write and truncate. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Greg Farnum <greg@inktank.com> Conflicts: fs/ceph/addr.c
2013-05-02 12:15:58 +08:00
} else {
ceph: introduce i_truncate_mutex I encountered below deadlock when running fsstress wmtruncate work truncate MDS --------------- ------------------ -------------------------- lock i_mutex <- truncate file lock i_mutex (blocked) <- revoking Fcb (filelock to MIX) send request -> handle request (xlock filelock) At the initial time, there are some dirty pages in the page cache. When the kclient receives the truncate message, it reduces inode size and creates some 'out of i_size' dirty pages. wmtruncate work can't truncate these dirty pages because it's blocked by the i_mutex. Later when the kclient receives the cap message that revokes Fcb caps, It can't flush all dirty pages because writepages() only flushes dirty pages within the inode size. When the MDS handles the 'truncate' request from kclient, it waits for the filelock to become stable. But the filelock is stuck in unstable state because it can't finish revoking kclient's Fcb caps. The truncate pagecache locking has already caused lots of trouble for use. I think it's time simplify it by introducing a new mutex. We use the new mutex to prevent concurrent truncate_inode_pages(). There is no need to worry about race between buffered write and truncate_inode_pages(), because our "get caps" mechanism prevents them from concurrent execution. Reviewed-by: Sage Weil <sage@inktank.com> Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2013-08-13 12:42:15 +08:00
/*
* No need to acquire the i_truncate_mutex. Because
* the MDS revokes Fwb caps before sending truncate
* message to us. We can't get Fwb cap while there
* are pending vmtruncate. So write and vmtruncate
* can not run at the same time
*/
ceph: switch to ->write_iter() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-04 11:09:01 +08:00
written = generic_perform_write(file, from, pos);
ceph_aio_write(): switch to generic_perform_write() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-02-12 11:28:43 +08:00
if (likely(written >= 0))
iocb->ki_pos = pos + written;
wrappers for ->i_mutex access parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested}, inode_foo(inode) being mutex_foo(&inode->i_mutex). Please, use those for access to ->i_mutex; over the coming cycle ->i_mutex will become rwsem, with ->lookup() done with it held only shared. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-23 04:40:57 +08:00
inode_unlock(inode);
ceph: revert commit 22cddde104 commit 22cddde104 breaks the atomicity of write operation, it also introduces a deadlock between write and truncate. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Greg Farnum <greg@inktank.com> Conflicts: fs/ceph/addr.c
2013-05-02 12:15:58 +08:00
}
ceph: avoid carrying Fw cap during write into page cache The generic_file_aio_write call may block on balance_dirty_pages while we flush data to the OSDs. If we hold a reference to the FILE_WR cap during that interval revocation by the MDS (e.g., to do a stat(2)) may be very slow. Reviewed-by: Yehuda Sadeh <yehuda@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2011-07-27 02:27:34 +08:00
ceph: apply write checks in ceph_aio_write copy write checks in __generic_file_aio_write to ceph_aio_write. To make these checks cover sync write path. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Alex Elder <elder@inktank.com>
2013-04-12 16:11:13 +08:00
if (written >= 0) {
ceph: do not call __mark_dirty_inode under i_lock The __mark_dirty_inode helper now takes i_lock as of 250df6ed. Fix the one ceph callers that held i_lock (__ceph_mark_dirty_caps) to return the flags value so that the callers can do it outside of i_lock. Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-05 02:33:47 +08:00
int dirty;
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-12-01 01:47:09 +08:00
spin_lock(&ci->i_ceph_lock);
ceph: convert inline data to normal data before data write Before any data write, convert inline data to normal data and set i_inline_version to CEPH_INLINE_NONE. The OSD request that saves inline data to object contains 3 operations (CMPXATTR, WRITE and SETXATTR). It compares a xattr named 'inline_version' to prevent old data overwrites newer data. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-11-14 22:38:29 +08:00
ci->i_inline_version = CEPH_INLINE_NONE;
ceph: pre-allocate data structure that tracks caps flushing Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-06-10 17:26:13 +08:00
dirty = __ceph_mark_dirty_caps(ci, CEPH_CAP_FILE_WR,
&prealloc_cf);
ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott <a.ott@m-privacy.de> Signed-off-by: Sage Weil <sage@newdream.net>
2011-12-01 01:47:09 +08:00
spin_unlock(&ci->i_ceph_lock);
ceph: do not call __mark_dirty_inode under i_lock The __mark_dirty_inode helper now takes i_lock as of 250df6ed. Fix the one ceph callers that held i_lock (__ceph_mark_dirty_caps) to return the flags value so that the callers can do it outside of i_lock. Signed-off-by: Sage Weil <sage@newdream.net>
2011-05-05 02:33:47 +08:00
if (dirty)
__mark_inode_dirty(inode, dirty);
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
}
ceph: revert commit 22cddde104 commit 22cddde104 breaks the atomicity of write operation, it also introduces a deadlock between write and truncate. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Greg Farnum <greg@inktank.com> Conflicts: fs/ceph/addr.c
2013-05-02 12:15:58 +08:00
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
dout("aio_write %p %llx.%llx %llu~%u dropping cap refs on %s\n",
ceph: switch to ->write_iter() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-04 11:09:01 +08:00
inode, ceph_vinop(inode), pos, (unsigned)count,
ceph: revert commit 22cddde104 commit 22cddde104 breaks the atomicity of write operation, it also introduces a deadlock between write and truncate. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Greg Farnum <greg@inktank.com> Conflicts: fs/ceph/addr.c
2013-05-02 12:15:58 +08:00
ceph_cap_string(got));
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
ceph_put_cap_refs(ci, got);
ceph: revert commit 22cddde104 commit 22cddde104 breaks the atomicity of write operation, it also introduces a deadlock between write and truncate. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Greg Farnum <greg@inktank.com> Conflicts: fs/ceph/addr.c
2013-05-02 12:15:58 +08:00
ceph: use generic_write_sync Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-07 23:52:02 +08:00
if (written >= 0) {
libceph: change ceph_osdmap_flag() to take osdc For the benefit of every single caller, take osdc instead of map. Also, now that osdc->osdmap can't ever be NULL, drop the check. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-04-28 22:07:25 +08:00
if (ceph_osdmap_flag(osdc, CEPH_OSDMAP_NEARFULL))
ceph: use generic_write_sync Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-07 23:52:02 +08:00
iocb->ki_flags |= IOCB_DSYNC;
written = generic_write_sync(iocb, written);
ceph: don't early drop Fw cap ceph_aio_write() has an optimization that marks CEPH_CAP_FILE_WR cap dirty before data is copied to page cache and inode size is updated. The optimization avoids slow cap revocation caused by balance_dirty_pages(), but introduces inode size update race. If ceph_check_caps() flushes the dirty cap before the inode size is updated, MDS can miss the new inode size. So just remove the optimization. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Greg Farnum <greg@inktank.com>
2013-03-01 10:55:39 +08:00
}
ceph: apply write checks in ceph_aio_write copy write checks in __generic_file_aio_write to ceph_aio_write. To make these checks cover sync write path. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Alex Elder <elder@inktank.com>
2013-04-12 16:11:13 +08:00
ceph: replace hold_mutex flag with goto All of the early exit paths need to drop the mutex; it is only the normal path through the function that does not. Skip the unlock in that case with a goto out_unlocked. Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Jianpeng Ma <majianpeng@gmail.com>
2013-08-10 00:57:58 +08:00
goto out_unlocked;
ceph: apply write checks in ceph_aio_write copy write checks in __generic_file_aio_write to ceph_aio_write. To make these checks cover sync write path. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Alex Elder <elder@inktank.com>
2013-04-12 16:11:13 +08:00
out:
wrappers for ->i_mutex access parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested}, inode_foo(inode) being mutex_foo(&inode->i_mutex). Please, use those for access to ->i_mutex; over the coming cycle ->i_mutex will become rwsem, with ->lookup() done with it held only shared. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-23 04:40:57 +08:00
inode_unlock(inode);
ceph: replace hold_mutex flag with goto All of the early exit paths need to drop the mutex; it is only the normal path through the function that does not. Skip the unlock in that case with a goto out_unlocked. Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Jianpeng Ma <majianpeng@gmail.com>
2013-08-10 00:57:58 +08:00
out_unlocked:
ceph: pre-allocate data structure that tracks caps flushing Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-06-10 17:26:13 +08:00
ceph_free_cap_flush(prealloc_cf);
ceph: apply write checks in ceph_aio_write copy write checks in __generic_file_aio_write to ceph_aio_write. To make these checks cover sync write path. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Reviewed-by: Alex Elder <elder@inktank.com>
2013-04-12 16:11:13 +08:00
current->backing_dev_info = NULL;
return written ? written : err;
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
}
/*
* llseek. be sure to verify file size on SEEK_END.
*/
lseek: the "whence" argument is called "whence" But the kernel decided to call it "origin" instead. Fix most of the sites. Acked-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-18 07:59:39 +08:00
static loff_t ceph_llseek(struct file *file, loff_t offset, int whence)
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
{
struct inode *inode = file->f_mapping->host;
ceph: use i_size_{read,write} to get/set i_size Cap message from MDS can update i_size. In that case, we don't hold i_mutex. So it's unsafe to directly access inode->i_size while holding i_mutex. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-30 11:32:46 +08:00
loff_t i_size;
ceph: Correctly return NXIO errors from ceph_llseek ceph_llseek does not correctly return NXIO errors because the 'out' path always returns 'offset'. Fixes: 06222e491e66 ("fs: handle SEEK_HOLE/SEEK_DATA properly in all fs's that define their own llseek") Signed-off-by: Phil Turnbull <phil.turnbull@oracle.com> Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-22 01:43:09 +08:00
loff_t ret;
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
wrappers for ->i_mutex access parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested}, inode_foo(inode) being mutex_foo(&inode->i_mutex). Please, use those for access to ->i_mutex; over the coming cycle ->i_mutex will become rwsem, with ->lookup() done with it held only shared. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-23 04:40:57 +08:00
inode_lock(inode);
ceph: fix SEEK_CUR, SEEK_SET regression Commit 06222e491e663dac939f04b125c9dc52126a75c4 got the if wrong so that it always evaluates as true. This is semantically harmless, but makes SEEK_CUR and SEEK_SET needlessly query the server. Rewrite the if to explicitly enumerate the cases we DO need a valid i_size to make this code less fragile. Reported-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Sage Weil <sage@newdream.net>
2011-12-14 01:19:26 +08:00
lseek: the "whence" argument is called "whence" But the kernel decided to call it "origin" instead. Fix most of the sites. Acked-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-18 07:59:39 +08:00
if (whence == SEEK_END || whence == SEEK_DATA || whence == SEEK_HOLE) {
ceph: request xattrs if xattr_version is zero Following sequence of events can happen. - Client releases an inode, queues cap release message. - A 'lookup' reply brings the same inode back, but the reply doesn't contain xattrs because MDS didn't receive the cap release message and thought client already has up-to-data xattrs. The fix is force sending a getattr request to MDS if xattrs_version is 0. The getattr mask is set to CEPH_STAT_CAP_XATTR, so MDS knows client does not have xattr. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-09-16 21:46:17 +08:00
ret = ceph_do_getattr(inode, CEPH_STAT_CAP_SIZE, false);
ceph: Correctly return NXIO errors from ceph_llseek ceph_llseek does not correctly return NXIO errors because the 'out' path always returns 'offset'. Fixes: 06222e491e66 ("fs: handle SEEK_HOLE/SEEK_DATA properly in all fs's that define their own llseek") Signed-off-by: Phil Turnbull <phil.turnbull@oracle.com> Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-22 01:43:09 +08:00
if (ret < 0)
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
goto out;
fs: handle SEEK_HOLE/SEEK_DATA properly in all fs's that define their own llseek This converts everybody to handle SEEK_HOLE/SEEK_DATA properly. In some cases we just return -EINVAL, in others we do the normal generic thing, and in others we're simply making sure that the properly due-dilligence is done. For example in NFS/CIFS we need to make sure the file size is update properly for the SEEK_HOLE and SEEK_DATA case, but since it calls the generic llseek stuff itself that is all we have to do. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-19 01:21:38 +08:00
}
ceph: use i_size_{read,write} to get/set i_size Cap message from MDS can update i_size. In that case, we don't hold i_mutex. So it's unsafe to directly access inode->i_size while holding i_mutex. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-30 11:32:46 +08:00
i_size = i_size_read(inode);
lseek: the "whence" argument is called "whence" But the kernel decided to call it "origin" instead. Fix most of the sites. Acked-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-18 07:59:39 +08:00
switch (whence) {
fs: handle SEEK_HOLE/SEEK_DATA properly in all fs's that define their own llseek This converts everybody to handle SEEK_HOLE/SEEK_DATA properly. In some cases we just return -EINVAL, in others we do the normal generic thing, and in others we're simply making sure that the properly due-dilligence is done. For example in NFS/CIFS we need to make sure the file size is update properly for the SEEK_HOLE and SEEK_DATA case, but since it calls the generic llseek stuff itself that is all we have to do. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-19 01:21:38 +08:00
case SEEK_END:
ceph: use i_size_{read,write} to get/set i_size Cap message from MDS can update i_size. In that case, we don't hold i_mutex. So it's unsafe to directly access inode->i_size while holding i_mutex. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-30 11:32:46 +08:00
offset += i_size;
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
break;
case SEEK_CUR:
/*
* Here we special-case the lseek(fd, 0, SEEK_CUR)
* position-querying operation. Avoid rewriting the "same"
* f_pos value back to the file because a concurrent read(),
* write() or lseek() might have altered it
*/
if (offset == 0) {
ceph: Correctly return NXIO errors from ceph_llseek ceph_llseek does not correctly return NXIO errors because the 'out' path always returns 'offset'. Fixes: 06222e491e66 ("fs: handle SEEK_HOLE/SEEK_DATA properly in all fs's that define their own llseek") Signed-off-by: Phil Turnbull <phil.turnbull@oracle.com> Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-22 01:43:09 +08:00
ret = file->f_pos;
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
goto out;
}
offset += file->f_pos;
break;
fs: handle SEEK_HOLE/SEEK_DATA properly in all fs's that define their own llseek This converts everybody to handle SEEK_HOLE/SEEK_DATA properly. In some cases we just return -EINVAL, in others we do the normal generic thing, and in others we're simply making sure that the properly due-dilligence is done. For example in NFS/CIFS we need to make sure the file size is update properly for the SEEK_HOLE and SEEK_DATA case, but since it calls the generic llseek stuff itself that is all we have to do. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-19 01:21:38 +08:00
case SEEK_DATA:
ceph: use i_size_{read,write} to get/set i_size Cap message from MDS can update i_size. In that case, we don't hold i_mutex. So it's unsafe to directly access inode->i_size while holding i_mutex. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-30 11:32:46 +08:00
if (offset >= i_size) {
fs: handle SEEK_HOLE/SEEK_DATA properly in all fs's that define their own llseek This converts everybody to handle SEEK_HOLE/SEEK_DATA properly. In some cases we just return -EINVAL, in others we do the normal generic thing, and in others we're simply making sure that the properly due-dilligence is done. For example in NFS/CIFS we need to make sure the file size is update properly for the SEEK_HOLE and SEEK_DATA case, but since it calls the generic llseek stuff itself that is all we have to do. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-19 01:21:38 +08:00
ret = -ENXIO;
goto out;
}
break;
case SEEK_HOLE:
ceph: use i_size_{read,write} to get/set i_size Cap message from MDS can update i_size. In that case, we don't hold i_mutex. So it's unsafe to directly access inode->i_size while holding i_mutex. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-30 11:32:46 +08:00
if (offset >= i_size) {
fs: handle SEEK_HOLE/SEEK_DATA properly in all fs's that define their own llseek This converts everybody to handle SEEK_HOLE/SEEK_DATA properly. In some cases we just return -EINVAL, in others we do the normal generic thing, and in others we're simply making sure that the properly due-dilligence is done. For example in NFS/CIFS we need to make sure the file size is update properly for the SEEK_HOLE and SEEK_DATA case, but since it calls the generic llseek stuff itself that is all we have to do. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-19 01:21:38 +08:00
ret = -ENXIO;
goto out;
}
ceph: use i_size_{read,write} to get/set i_size Cap message from MDS can update i_size. In that case, we don't hold i_mutex. So it's unsafe to directly access inode->i_size while holding i_mutex. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-12-30 11:32:46 +08:00
offset = i_size;
fs: handle SEEK_HOLE/SEEK_DATA properly in all fs's that define their own llseek This converts everybody to handle SEEK_HOLE/SEEK_DATA properly. In some cases we just return -EINVAL, in others we do the normal generic thing, and in others we're simply making sure that the properly due-dilligence is done. For example in NFS/CIFS we need to make sure the file size is update properly for the SEEK_HOLE and SEEK_DATA case, but since it calls the generic llseek stuff itself that is all we have to do. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-07-19 01:21:38 +08:00
break;
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
}
ceph: Correctly return NXIO errors from ceph_llseek ceph_llseek does not correctly return NXIO errors because the 'out' path always returns 'offset'. Fixes: 06222e491e66 ("fs: handle SEEK_HOLE/SEEK_DATA properly in all fs's that define their own llseek") Signed-off-by: Phil Turnbull <phil.turnbull@oracle.com> Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-22 01:43:09 +08:00
ret = vfs_setpos(file, offset, inode->i_sb->s_maxbytes);
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
out:
wrappers for ->i_mutex access parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested}, inode_foo(inode) being mutex_foo(&inode->i_mutex). Please, use those for access to ->i_mutex; over the coming cycle ->i_mutex will become rwsem, with ->lookup() done with it held only shared. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-23 04:40:57 +08:00
inode_unlock(inode);
ceph: Correctly return NXIO errors from ceph_llseek ceph_llseek does not correctly return NXIO errors because the 'out' path always returns 'offset'. Fixes: 06222e491e66 ("fs: handle SEEK_HOLE/SEEK_DATA properly in all fs's that define their own llseek") Signed-off-by: Phil Turnbull <phil.turnbull@oracle.com> Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-07-22 01:43:09 +08:00
return ret;
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
}
ceph: punch hole support This patch implements fallocate and punch hole support for Ceph kernel client. Signed-off-by: Li Wang <liwang@ubuntukylin.com> Signed-off-by: Yunchuan Wen <yunchuanwen@ubuntukylin.com>
2013-08-15 11:51:44 +08:00
static inline void ceph_zero_partial_page(
struct inode *inode, loff_t offset, unsigned size)
{
struct page *page;
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
pgoff_t index = offset >> PAGE_SHIFT;
ceph: punch hole support This patch implements fallocate and punch hole support for Ceph kernel client. Signed-off-by: Li Wang <liwang@ubuntukylin.com> Signed-off-by: Yunchuan Wen <yunchuanwen@ubuntukylin.com>
2013-08-15 11:51:44 +08:00
page = find_lock_page(inode->i_mapping, index);
if (page) {
wait_on_page_writeback(page);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
zero_user(page, offset & (PAGE_SIZE - 1), size);
ceph: punch hole support This patch implements fallocate and punch hole support for Ceph kernel client. Signed-off-by: Li Wang <liwang@ubuntukylin.com> Signed-off-by: Yunchuan Wen <yunchuanwen@ubuntukylin.com>
2013-08-15 11:51:44 +08:00
unlock_page(page);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
put_page(page);
ceph: punch hole support This patch implements fallocate and punch hole support for Ceph kernel client. Signed-off-by: Li Wang <liwang@ubuntukylin.com> Signed-off-by: Yunchuan Wen <yunchuanwen@ubuntukylin.com>
2013-08-15 11:51:44 +08:00
}
}
static void ceph_zero_pagecache_range(struct inode *inode, loff_t offset,
loff_t length)
{
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
loff_t nearly = round_up(offset, PAGE_SIZE);
ceph: punch hole support This patch implements fallocate and punch hole support for Ceph kernel client. Signed-off-by: Li Wang <liwang@ubuntukylin.com> Signed-off-by: Yunchuan Wen <yunchuanwen@ubuntukylin.com>
2013-08-15 11:51:44 +08:00
if (offset < nearly) {
loff_t size = nearly - offset;
if (length < size)
size = length;
ceph_zero_partial_page(inode, offset, size);
offset += size;
length -= size;
}
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 20:29:47 +08:00
if (length >= PAGE_SIZE) {
loff_t size = round_down(length, PAGE_SIZE);
ceph: punch hole support This patch implements fallocate and punch hole support for Ceph kernel client. Signed-off-by: Li Wang <liwang@ubuntukylin.com> Signed-off-by: Yunchuan Wen <yunchuanwen@ubuntukylin.com>
2013-08-15 11:51:44 +08:00
truncate_pagecache_range(inode, offset, offset + size - 1);
offset += size;
length -= size;
}
if (length)
ceph_zero_partial_page(inode, offset, length);
}
static int ceph_zero_partial_object(struct inode *inode,
loff_t offset, loff_t *length)
{
struct ceph_inode_info *ci = ceph_inode(inode);
struct ceph_fs_client *fsc = ceph_inode_to_client(inode);
struct ceph_osd_request *req;
int ret = 0;
loff_t zero = 0;
int op;
if (!length) {
op = offset ? CEPH_OSD_OP_DELETE : CEPH_OSD_OP_TRUNCATE;
length = &zero;
} else {
op = CEPH_OSD_OP_ZERO;
}
req = ceph_osdc_new_request(&fsc->client->osdc, &ci->i_layout,
ceph_vino(inode),
offset, length,
libceph: specify position of extent operation allow specifying position of extent operation in multi-operations osd request. This is required for cephfs to convert inline data to normal data (compare xattr, then write object). Signed-off-by: Yan, Zheng <zyan@redhat.com> Reviewed-by: Ilya Dryomov <idryomov@redhat.com>
2014-11-13 14:40:37 +08:00
0, 1, op,
libceph, rbd, ceph: WRITE | ONDISK -> WRITE CEPH_OSD_FLAG_ONDISK is set in account_request(). Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com>
2017-02-12 01:48:41 +08:00
CEPH_OSD_FLAG_WRITE,
ceph: punch hole support This patch implements fallocate and punch hole support for Ceph kernel client. Signed-off-by: Li Wang <liwang@ubuntukylin.com> Signed-off-by: Yunchuan Wen <yunchuanwen@ubuntukylin.com>
2013-08-15 11:51:44 +08:00
NULL, 0, 0, false);
if (IS_ERR(req)) {
ret = PTR_ERR(req);
goto out;
}
libceph: switch to calc_target(), part 2 The crux of this is getting rid of ceph_osdc_build_request(), so that MOSDOp can be encoded not before but after calc_target() calculates the actual target. Encoding now happens within ceph_osdc_start_request(). Also nuked is the accompanying bunch of pointers into the encoded buffer that was used to update fields on each send - instead, the entire front is re-encoded. If we want to support target->name_len != base->name_len in the future, there is no other way, because oid is surrounded by other fields in the encoded buffer. Encoding OSD ops and adding data items to the request message were mixed together in osd_req_encode_op(). While we want to re-encode OSD ops, we don't want to add duplicate data items to the message when resending, so all call to ceph_osdc_msg_data_add() are factored out into a new setup_request_data(). Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-05-26 06:29:52 +08:00
req->r_mtime = inode->i_mtime;
ceph: punch hole support This patch implements fallocate and punch hole support for Ceph kernel client. Signed-off-by: Li Wang <liwang@ubuntukylin.com> Signed-off-by: Yunchuan Wen <yunchuanwen@ubuntukylin.com>
2013-08-15 11:51:44 +08:00
ret = ceph_osdc_start_request(&fsc->client->osdc, req, false);
if (!ret) {
ret = ceph_osdc_wait_request(&fsc->client->osdc, req);
if (ret == -ENOENT)
ret = 0;
}
ceph_osdc_put_request(req);
out:
return ret;
}
static int ceph_zero_objects(struct inode *inode, loff_t offset, loff_t length)
{
int ret = 0;
struct ceph_inode_info *ci = ceph_inode(inode);
libceph: define new ceph_file_layout structure Define new ceph_file_layout structure and rename old ceph_file_layout to ceph_file_layout_legacy. This is preparation for adding namespace to ceph_file_layout structure. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-02-03 21:24:49 +08:00
s32 stripe_unit = ci->i_layout.stripe_unit;
s32 stripe_count = ci->i_layout.stripe_count;
s32 object_size = ci->i_layout.object_size;
ceph: fix fallocate division We need to use do_div to divide by a 64-bit value. Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-08-28 03:15:16 +08:00
u64 object_set_size = object_size * stripe_count;
u64 nearly, t;
/* round offset up to next period boundary */
nearly = offset + object_set_size - 1;
t = nearly;
nearly -= do_div(t, object_set_size);
ceph: punch hole support This patch implements fallocate and punch hole support for Ceph kernel client. Signed-off-by: Li Wang <liwang@ubuntukylin.com> Signed-off-by: Yunchuan Wen <yunchuanwen@ubuntukylin.com>
2013-08-15 11:51:44 +08:00
while (length && offset < nearly) {
loff_t size = length;
ret = ceph_zero_partial_object(inode, offset, &size);
if (ret < 0)
return ret;
offset += size;
length -= size;
}
while (length >= object_set_size) {
int i;
loff_t pos = offset;
for (i = 0; i < stripe_count; ++i) {
ret = ceph_zero_partial_object(inode, pos, NULL);
if (ret < 0)
return ret;
pos += stripe_unit;
}
offset += object_set_size;
length -= object_set_size;
}
while (length) {
loff_t size = length;
ret = ceph_zero_partial_object(inode, offset, &size);
if (ret < 0)
return ret;
offset += size;
length -= size;
}
return ret;
}
static long ceph_fallocate(struct file *file, int mode,
loff_t offset, loff_t length)
{
struct ceph_file_info *fi = file->private_data;
fs: ceph: new helper: file_inode(file) Signed-off-by: Libo Chen <clbchenlibo.chen@huawei.com> Signed-off-by: Sage Weil <sage@inktank.com>
2013-12-11 13:49:11 +08:00
struct inode *inode = file_inode(file);
ceph: punch hole support This patch implements fallocate and punch hole support for Ceph kernel client. Signed-off-by: Li Wang <liwang@ubuntukylin.com> Signed-off-by: Yunchuan Wen <yunchuanwen@ubuntukylin.com>
2013-08-15 11:51:44 +08:00
struct ceph_inode_info *ci = ceph_inode(inode);
struct ceph_osd_client *osdc =
&ceph_inode_to_client(inode)->client->osdc;
ceph: pre-allocate data structure that tracks caps flushing Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-06-10 17:26:13 +08:00
struct ceph_cap_flush *prealloc_cf;
ceph: punch hole support This patch implements fallocate and punch hole support for Ceph kernel client. Signed-off-by: Li Wang <liwang@ubuntukylin.com> Signed-off-by: Yunchuan Wen <yunchuanwen@ubuntukylin.com>
2013-08-15 11:51:44 +08:00
int want, got = 0;
int dirty;
int ret = 0;
loff_t endoff = 0;
loff_t size;
ceph: check unsupported fallocate mode Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
2014-06-26 15:25:17 +08:00
if (mode & ~(FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE))
return -EOPNOTSUPP;
ceph: punch hole support This patch implements fallocate and punch hole support for Ceph kernel client. Signed-off-by: Li Wang <liwang@ubuntukylin.com> Signed-off-by: Yunchuan Wen <yunchuanwen@ubuntukylin.com>
2013-08-15 11:51:44 +08:00
if (!S_ISREG(inode->i_mode))
return -EOPNOTSUPP;
ceph: pre-allocate data structure that tracks caps flushing Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-06-10 17:26:13 +08:00
prealloc_cf = ceph_alloc_cap_flush();
if (!prealloc_cf)
return -ENOMEM;
wrappers for ->i_mutex access parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested}, inode_foo(inode) being mutex_foo(&inode->i_mutex). Please, use those for access to ->i_mutex; over the coming cycle ->i_mutex will become rwsem, with ->lookup() done with it held only shared. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-23 04:40:57 +08:00
inode_lock(inode);
ceph: punch hole support This patch implements fallocate and punch hole support for Ceph kernel client. Signed-off-by: Li Wang <liwang@ubuntukylin.com> Signed-off-by: Yunchuan Wen <yunchuanwen@ubuntukylin.com>
2013-08-15 11:51:44 +08:00
if (ceph_snap(inode) != CEPH_NOSNAP) {
ret = -EROFS;
goto unlock;
}
libceph: change ceph_osdmap_flag() to take osdc For the benefit of every single caller, take osdc instead of map. Also, now that osdc->osdmap can't ever be NULL, drop the check. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2016-04-28 22:07:25 +08:00
if (ceph_osdmap_flag(osdc, CEPH_OSDMAP_FULL) &&
!(mode & FALLOC_FL_PUNCH_HOLE)) {
ceph: punch hole support This patch implements fallocate and punch hole support for Ceph kernel client. Signed-off-by: Li Wang <liwang@ubuntukylin.com> Signed-off-by: Yunchuan Wen <yunchuanwen@ubuntukylin.com>
2013-08-15 11:51:44 +08:00
ret = -ENOSPC;
goto unlock;
}
ceph: convert inline data to normal data before data write Before any data write, convert inline data to normal data and set i_inline_version to CEPH_INLINE_NONE. The OSD request that saves inline data to object contains 3 operations (CMPXATTR, WRITE and SETXATTR). It compares a xattr named 'inline_version' to prevent old data overwrites newer data. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-11-14 22:38:29 +08:00
if (ci->i_inline_version != CEPH_INLINE_NONE) {
ret = ceph_uninline_data(file, NULL);
if (ret < 0)
goto unlock;
}
ceph: punch hole support This patch implements fallocate and punch hole support for Ceph kernel client. Signed-off-by: Li Wang <liwang@ubuntukylin.com> Signed-off-by: Yunchuan Wen <yunchuanwen@ubuntukylin.com>
2013-08-15 11:51:44 +08:00
size = i_size_read(inode);
if (!(mode & FALLOC_FL_KEEP_SIZE))
endoff = offset + length;
if (fi->fmode & CEPH_FILE_MODE_LAZY)
want = CEPH_CAP_FILE_BUFFER | CEPH_CAP_FILE_LAZYIO;
else
want = CEPH_CAP_FILE_BUFFER;
ceph: fetch inline data when getting Fcr cap refs we can't use getattr to fetch inline data after getting Fcr caps, because it can cause deadlock. The solution is try bringing inline data to page cache when not holding any cap, and hope the inline data page is still there after getting the Fcr caps. If the page is still there, pin it in page cache for later IO. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-11-14 22:10:07 +08:00
ret = ceph_get_caps(ci, CEPH_CAP_FILE_WR, want, endoff, &got, NULL);
ceph: punch hole support This patch implements fallocate and punch hole support for Ceph kernel client. Signed-off-by: Li Wang <liwang@ubuntukylin.com> Signed-off-by: Yunchuan Wen <yunchuanwen@ubuntukylin.com>
2013-08-15 11:51:44 +08:00
if (ret < 0)
goto unlock;
if (mode & FALLOC_FL_PUNCH_HOLE) {
if (offset < size)
ceph_zero_pagecache_range(inode, offset, length);
ret = ceph_zero_objects(inode, offset, length);
} else if (endoff > size) {
truncate_pagecache_range(inode, size, -1);
if (ceph_inode_set_size(inode, endoff))
ceph_check_caps(ceph_inode(inode),
CHECK_CAPS_AUTHONLY, NULL);
}
if (!ret) {
spin_lock(&ci->i_ceph_lock);
ceph: convert inline data to normal data before data write Before any data write, convert inline data to normal data and set i_inline_version to CEPH_INLINE_NONE. The OSD request that saves inline data to object contains 3 operations (CMPXATTR, WRITE and SETXATTR). It compares a xattr named 'inline_version' to prevent old data overwrites newer data. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-11-14 22:38:29 +08:00
ci->i_inline_version = CEPH_INLINE_NONE;
ceph: pre-allocate data structure that tracks caps flushing Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-06-10 17:26:13 +08:00
dirty = __ceph_mark_dirty_caps(ci, CEPH_CAP_FILE_WR,
&prealloc_cf);
ceph: punch hole support This patch implements fallocate and punch hole support for Ceph kernel client. Signed-off-by: Li Wang <liwang@ubuntukylin.com> Signed-off-by: Yunchuan Wen <yunchuanwen@ubuntukylin.com>
2013-08-15 11:51:44 +08:00
spin_unlock(&ci->i_ceph_lock);
if (dirty)
__mark_inode_dirty(inode, dirty);
}
ceph_put_cap_refs(ci, got);
unlock:
wrappers for ->i_mutex access parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested}, inode_foo(inode) being mutex_foo(&inode->i_mutex). Please, use those for access to ->i_mutex; over the coming cycle ->i_mutex will become rwsem, with ->lookup() done with it held only shared. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-23 04:40:57 +08:00
inode_unlock(inode);
ceph: pre-allocate data structure that tracks caps flushing Signed-off-by: Yan, Zheng <zyan@redhat.com>
2015-06-10 17:26:13 +08:00
ceph_free_cap_flush(prealloc_cf);
ceph: punch hole support This patch implements fallocate and punch hole support for Ceph kernel client. Signed-off-by: Li Wang <liwang@ubuntukylin.com> Signed-off-by: Yunchuan Wen <yunchuanwen@ubuntukylin.com>
2013-08-15 11:51:44 +08:00
return ret;
}
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
const struct file_operations ceph_file_fops = {
.open = ceph_open,
.release = ceph_release,
.llseek = ceph_llseek,
ceph: switch to ->read_iter() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-03 08:28:01 +08:00
.read_iter = ceph_read_iter,
ceph: switch to ->write_iter() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-04 11:09:01 +08:00
.write_iter = ceph_write_iter,
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
.mmap = ceph_mmap,
.fsync = ceph_fsync,
ceph: add flock/fcntl lock support Implement flock inode operation to support advisory file locking. All lock/unlock operations are synchronous with the MDS. Lock state is sent when reconnecting to a recovering MDS to restore the shared lock state. Signed-off-by: Greg Farnum <gregf@hq.newdream.net> Signed-off-by: Sage Weil <sage@newdream.net>
2010-08-03 06:34:23 +08:00
.lock = ceph_lock,
.flock = ceph_flock,
ceph: fix splice read for no Fc capability case When iov_iter type is ITER_PIPE, copy_page_to_iter() increases the page's reference and add the page to a pipe_buffer. It also set the pipe_buffer's ops to page_cache_pipe_buf_ops. The comfirm callback in page_cache_pipe_buf_ops expects the page is from page cache and uptodate, otherwise it return error. For ceph_sync_read() case, pages are not from page cache. So we can't call copy_page_to_iter() when iov_iter type is ITER_PIPE. The fix is using iov_iter_get_pages_alloc() to allocate pages for the pipe. (the code is similar to default_file_splice_read) Signed-off-by: Yan, Zheng <zyan@redhat.com>
2016-11-08 21:54:34 +08:00
.splice_read = generic_file_splice_read,
ceph: switch to iter_file_splice_write() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-05 16:40:12 +08:00
.splice_write = iter_file_splice_write,
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
.unlocked_ioctl = ceph_ioctl,
.compat_ioctl = ceph_ioctl,
ceph: punch hole support This patch implements fallocate and punch hole support for Ceph kernel client. Signed-off-by: Li Wang <liwang@ubuntukylin.com> Signed-off-by: Yunchuan Wen <yunchuanwen@ubuntukylin.com>
2013-08-15 11:51:44 +08:00
.fallocate = ceph_fallocate,
ceph: file operations File open and close operations, and read and write methods that ensure we have obtained the proper capabilities from the MDS cluster before performing IO on a file. We take references on held capabilities for the duration of the read/write to avoid prematurely releasing them back to the MDS. We implement two main paths for read and write: one that is buffered (and uses generic_aio_{read,write}), and one that is fully synchronous and blocking (operating either on a __user pointer or, if O_DIRECT, directly on user pages). Signed-off-by: Sage Weil <sage@newdream.net>
2009-10-07 02:31:08 +08:00
};