linux-sg2042/drivers/usb/serial/kobil_sct.h

#define SUSBCRequest_SetBaudRateParityAndStopBits       1
#define SUSBCR_SBR_MASK				0xFF00
#define SUSBCR_SBR_1200				0x0100
#define SUSBCR_SBR_9600				0x0200
#define SUSBCR_SBR_19200			0x0400
#define SUSBCR_SBR_28800			0x0800
#define SUSBCR_SBR_38400			0x1000
#define SUSBCR_SBR_57600			0x2000
#define SUSBCR_SBR_115200			0x4000

#define SUSBCR_SPASB_MASK			0x0070
#define SUSBCR_SPASB_NoParity			0x0010
#define SUSBCR_SPASB_OddParity			0x0020
#define SUSBCR_SPASB_EvenParity			0x0040

#define SUSBCR_SPASB_STPMASK			0x0003
#define SUSBCR_SPASB_1StopBit			0x0001
#define SUSBCR_SPASB_2StopBits			0x0002

#define SUSBCRequest_SetStatusLinesOrQueues	2
#define SUSBCR_SSL_SETRTS			0x0001
#define SUSBCR_SSL_CLRRTS			0x0002
#define SUSBCR_SSL_SETDTR			0x0004
#define SUSBCR_SSL_CLRDTR			0x0010

/* Kill the pending/current writes to the comm port. */
#define SUSBCR_SSL_PURGE_TXABORT		0x0100
/* Kill the pending/current reads to the comm port. */
#define SUSBCR_SSL_PURGE_RXABORT		0x0200
/* Kill the transmit queue if there. */
#define SUSBCR_SSL_PURGE_TXCLEAR		0x0400
/* Kill the typeahead buffer if there. */
#define SUSBCR_SSL_PURGE_RXCLEAR		0x0800

#define SUSBCRequest_GetStatusLineState		4
/* Any Character received */
#define SUSBCR_GSL_RXCHAR			0x0001
/* Transmitt Queue Empty */
#define SUSBCR_GSL_TXEMPTY			0x0004
/* CTS changed state */
#define SUSBCR_GSL_CTS				0x0008
/* DSR changed state */
#define SUSBCR_GSL_DSR				0x0010
/* RLSD changed state */
#define SUSBCR_GSL_RLSD				0x0020
/* BREAK received */
#define SUSBCR_GSL_BREAK			0x0040
/* Line status error occurred */
#define SUSBCR_GSL_ERR				0x0080
/* Ring signal detected */
#define SUSBCR_GSL_RING				0x0100

#define SUSBCRequest_Misc			8
/* use a predefined reset sequence */
#define SUSBCR_MSC_ResetReader			0x0001
/* use a predefined sequence to reset the internal queues */
#define SUSBCR_MSC_ResetAllQueues		0x0002

#define SUSBCRequest_GetMisc			0x10

/*
 * get the firmware version from device, coded like this 0xHHLLBBPP with
 * HH = Firmware Version High Byte
 * LL = Firmware Version Low Byte
 * BB = Build Number
 * PP = Further Attributes
 */
#define SUSBCR_MSC_GetFWVersion			0x0001

/*
 * get the hardware version from device coded like this 0xHHLLPPRR with
 * HH = Software Version High Byte
 * LL = Software Version Low Byte
 * PP = Further Attributes
 * RR = Reserved for the hardware ID
 */
#define SUSBCR_MSC_GetHWVersion			0x0002