linux-sg2042/drivers/scsi/scsi_transport_fc.c

3328 lines
99 KiB
C
Raw Normal View History

/*
* FiberChannel transport specific attributes exported to sysfs.
*
* Copyright (c) 2003 Silicon Graphics, Inc. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* ========
*
* Copyright (C) 2004-2007 James Smart, Emulex Corporation
* Rewrite for host, target, device, and remote port attributes,
* statistics, and service functions...
* Add vports, etc
*
*/
#include <linux/module.h>
#include <linux/init.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport.h>
#include <scsi/scsi_transport_fc.h>
#include <scsi/scsi_cmnd.h>
[SCSI] SCSI and FC Transport: add netlink support for posting of transport events This patch formally adds support for the posting of FC events via netlink. It is a followup to the original RFC at: http://marc.theaimsgroup.com/?l=linux-scsi&m=114530667923464&w=2 and the initial posting at: http://marc.theaimsgroup.com/?l=linux-scsi&m=115507374832500&w=2 The patch has been updated to optimize the send path, per the discussions in the initial posting. Per discussions at the Storage Summit and at OLS, we are to use netlink for async events from transports. Also per discussions, to avoid a netlink protocol per transport, I've create a single NETLINK_SCSITRANSPORT protocol, which can then be used by all transports. This patch: - Creates new files scsi_netlink.c and scsi_netlink.h, which contains the single and shared definitions for the SCSI Transport. It is tied into the base SCSI subsystem intialization. Contains a single interface routine, scsi_send_transport_event(), for a transport to send an event (via multicast to a protocol specific group). - Creates a new scsi_netlink_fc.h file, which contains the FC netlink event messages - Adds 3 new routines to the fc transport: fc_get_event_number() - to get a FC event # fc_host_post_event() - to send a simple FC event (32 bits of data) fc_host_post_vendor_event() - to send a Vendor unique event, with arbitrary amounts of data. Note: the separation of event number allows for a LLD to send a standard event, followed by vendor-specific data for the event. Note: This patch assumes 2 prior fc transport patches have been installed: http://marc.theaimsgroup.com/?l=linux-scsi&m=115555807316329&w=2 http://marc.theaimsgroup.com/?l=linux-scsi&m=115581614930261&w=2 Sorry - next time I'll do something like making these individual patches of the same posting when I know they'll be posted closely together. Signed-off-by: James Smart <James.Smart@emulex.com> Tidy up configuration not to make SCSI always select NET Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-19 05:30:09 +08:00
#include <linux/netlink.h>
#include <net/netlink.h>
#include <scsi/scsi_netlink_fc.h>
#include "scsi_priv.h"
#include "scsi_transport_fc_internal.h"
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
static int fc_queue_work(struct Scsi_Host *, struct work_struct *);
static void fc_vport_sched_delete(struct work_struct *work);
static int fc_vport_setup(struct Scsi_Host *shost, int channel,
struct device *pdev, struct fc_vport_identifiers *ids,
struct fc_vport **vport);
/*
* Redefine so that we can have same named attributes in the
* sdev/starget/host objects.
*/
#define FC_DEVICE_ATTR(_prefix,_name,_mode,_show,_store) \
struct device_attribute device_attr_##_prefix##_##_name = \
__ATTR(_name,_mode,_show,_store)
#define fc_enum_name_search(title, table_type, table) \
static const char *get_fc_##title##_name(enum table_type table_key) \
{ \
int i; \
char *name = NULL; \
\
for (i = 0; i < ARRAY_SIZE(table); i++) { \
if (table[i].value == table_key) { \
name = table[i].name; \
break; \
} \
} \
return name; \
}
#define fc_enum_name_match(title, table_type, table) \
static int get_fc_##title##_match(const char *table_key, \
enum table_type *value) \
{ \
int i; \
\
for (i = 0; i < ARRAY_SIZE(table); i++) { \
if (strncmp(table_key, table[i].name, \
table[i].matchlen) == 0) { \
*value = table[i].value; \
return 0; /* success */ \
} \
} \
return 1; /* failure */ \
}
/* Convert fc_port_type values to ascii string name */
static struct {
enum fc_port_type value;
char *name;
} fc_port_type_names[] = {
{ FC_PORTTYPE_UNKNOWN, "Unknown" },
{ FC_PORTTYPE_OTHER, "Other" },
{ FC_PORTTYPE_NOTPRESENT, "Not Present" },
{ FC_PORTTYPE_NPORT, "NPort (fabric via point-to-point)" },
{ FC_PORTTYPE_NLPORT, "NLPort (fabric via loop)" },
{ FC_PORTTYPE_LPORT, "LPort (private loop)" },
{ FC_PORTTYPE_PTP, "Point-To-Point (direct nport connection" },
{ FC_PORTTYPE_NPIV, "NPIV VPORT" },
};
fc_enum_name_search(port_type, fc_port_type, fc_port_type_names)
#define FC_PORTTYPE_MAX_NAMELEN 50
/* Reuse fc_port_type enum function for vport_type */
#define get_fc_vport_type_name get_fc_port_type_name
[SCSI] SCSI and FC Transport: add netlink support for posting of transport events This patch formally adds support for the posting of FC events via netlink. It is a followup to the original RFC at: http://marc.theaimsgroup.com/?l=linux-scsi&m=114530667923464&w=2 and the initial posting at: http://marc.theaimsgroup.com/?l=linux-scsi&m=115507374832500&w=2 The patch has been updated to optimize the send path, per the discussions in the initial posting. Per discussions at the Storage Summit and at OLS, we are to use netlink for async events from transports. Also per discussions, to avoid a netlink protocol per transport, I've create a single NETLINK_SCSITRANSPORT protocol, which can then be used by all transports. This patch: - Creates new files scsi_netlink.c and scsi_netlink.h, which contains the single and shared definitions for the SCSI Transport. It is tied into the base SCSI subsystem intialization. Contains a single interface routine, scsi_send_transport_event(), for a transport to send an event (via multicast to a protocol specific group). - Creates a new scsi_netlink_fc.h file, which contains the FC netlink event messages - Adds 3 new routines to the fc transport: fc_get_event_number() - to get a FC event # fc_host_post_event() - to send a simple FC event (32 bits of data) fc_host_post_vendor_event() - to send a Vendor unique event, with arbitrary amounts of data. Note: the separation of event number allows for a LLD to send a standard event, followed by vendor-specific data for the event. Note: This patch assumes 2 prior fc transport patches have been installed: http://marc.theaimsgroup.com/?l=linux-scsi&m=115555807316329&w=2 http://marc.theaimsgroup.com/?l=linux-scsi&m=115581614930261&w=2 Sorry - next time I'll do something like making these individual patches of the same posting when I know they'll be posted closely together. Signed-off-by: James Smart <James.Smart@emulex.com> Tidy up configuration not to make SCSI always select NET Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-19 05:30:09 +08:00
/* Convert fc_host_event_code values to ascii string name */
static const struct {
enum fc_host_event_code value;
char *name;
} fc_host_event_code_names[] = {
{ FCH_EVT_LIP, "lip" },
{ FCH_EVT_LINKUP, "link_up" },
{ FCH_EVT_LINKDOWN, "link_down" },
{ FCH_EVT_LIPRESET, "lip_reset" },
{ FCH_EVT_RSCN, "rscn" },
{ FCH_EVT_ADAPTER_CHANGE, "adapter_chg" },
{ FCH_EVT_PORT_UNKNOWN, "port_unknown" },
{ FCH_EVT_PORT_ONLINE, "port_online" },
{ FCH_EVT_PORT_OFFLINE, "port_offline" },
{ FCH_EVT_PORT_FABRIC, "port_fabric" },
{ FCH_EVT_LINK_UNKNOWN, "link_unknown" },
{ FCH_EVT_VENDOR_UNIQUE, "vendor_unique" },
};
fc_enum_name_search(host_event_code, fc_host_event_code,
fc_host_event_code_names)
#define FC_HOST_EVENT_CODE_MAX_NAMELEN 30
/* Convert fc_port_state values to ascii string name */
static struct {
enum fc_port_state value;
char *name;
} fc_port_state_names[] = {
{ FC_PORTSTATE_UNKNOWN, "Unknown" },
{ FC_PORTSTATE_NOTPRESENT, "Not Present" },
{ FC_PORTSTATE_ONLINE, "Online" },
{ FC_PORTSTATE_OFFLINE, "Offline" },
{ FC_PORTSTATE_BLOCKED, "Blocked" },
{ FC_PORTSTATE_BYPASSED, "Bypassed" },
{ FC_PORTSTATE_DIAGNOSTICS, "Diagnostics" },
{ FC_PORTSTATE_LINKDOWN, "Linkdown" },
{ FC_PORTSTATE_ERROR, "Error" },
{ FC_PORTSTATE_LOOPBACK, "Loopback" },
{ FC_PORTSTATE_DELETED, "Deleted" },
};
fc_enum_name_search(port_state, fc_port_state, fc_port_state_names)
#define FC_PORTSTATE_MAX_NAMELEN 20
/* Convert fc_vport_state values to ascii string name */
static struct {
enum fc_vport_state value;
char *name;
} fc_vport_state_names[] = {
{ FC_VPORT_UNKNOWN, "Unknown" },
{ FC_VPORT_ACTIVE, "Active" },
{ FC_VPORT_DISABLED, "Disabled" },
{ FC_VPORT_LINKDOWN, "Linkdown" },
{ FC_VPORT_INITIALIZING, "Initializing" },
{ FC_VPORT_NO_FABRIC_SUPP, "No Fabric Support" },
{ FC_VPORT_NO_FABRIC_RSCS, "No Fabric Resources" },
{ FC_VPORT_FABRIC_LOGOUT, "Fabric Logout" },
{ FC_VPORT_FABRIC_REJ_WWN, "Fabric Rejected WWN" },
{ FC_VPORT_FAILED, "VPort Failed" },
};
fc_enum_name_search(vport_state, fc_vport_state, fc_vport_state_names)
#define FC_VPORTSTATE_MAX_NAMELEN 24
/* Reuse fc_vport_state enum function for vport_last_state */
#define get_fc_vport_last_state_name get_fc_vport_state_name
/* Convert fc_tgtid_binding_type values to ascii string name */
static const struct {
enum fc_tgtid_binding_type value;
char *name;
int matchlen;
} fc_tgtid_binding_type_names[] = {
{ FC_TGTID_BIND_NONE, "none", 4 },
{ FC_TGTID_BIND_BY_WWPN, "wwpn (World Wide Port Name)", 4 },
{ FC_TGTID_BIND_BY_WWNN, "wwnn (World Wide Node Name)", 4 },
{ FC_TGTID_BIND_BY_ID, "port_id (FC Address)", 7 },
};
fc_enum_name_search(tgtid_bind_type, fc_tgtid_binding_type,
fc_tgtid_binding_type_names)
fc_enum_name_match(tgtid_bind_type, fc_tgtid_binding_type,
fc_tgtid_binding_type_names)
#define FC_BINDTYPE_MAX_NAMELEN 30
#define fc_bitfield_name_search(title, table) \
static ssize_t \
get_fc_##title##_names(u32 table_key, char *buf) \
{ \
char *prefix = ""; \
ssize_t len = 0; \
int i; \
\
for (i = 0; i < ARRAY_SIZE(table); i++) { \
if (table[i].value & table_key) { \
len += sprintf(buf + len, "%s%s", \
prefix, table[i].name); \
prefix = ", "; \
} \
} \
len += sprintf(buf + len, "\n"); \
return len; \
}
/* Convert FC_COS bit values to ascii string name */
static const struct {
u32 value;
char *name;
} fc_cos_names[] = {
{ FC_COS_CLASS1, "Class 1" },
{ FC_COS_CLASS2, "Class 2" },
{ FC_COS_CLASS3, "Class 3" },
{ FC_COS_CLASS4, "Class 4" },
{ FC_COS_CLASS6, "Class 6" },
};
fc_bitfield_name_search(cos, fc_cos_names)
/* Convert FC_PORTSPEED bit values to ascii string name */
static const struct {
u32 value;
char *name;
} fc_port_speed_names[] = {
{ FC_PORTSPEED_1GBIT, "1 Gbit" },
{ FC_PORTSPEED_2GBIT, "2 Gbit" },
{ FC_PORTSPEED_4GBIT, "4 Gbit" },
{ FC_PORTSPEED_10GBIT, "10 Gbit" },
{ FC_PORTSPEED_8GBIT, "8 Gbit" },
{ FC_PORTSPEED_16GBIT, "16 Gbit" },
{ FC_PORTSPEED_NOT_NEGOTIATED, "Not Negotiated" },
};
fc_bitfield_name_search(port_speed, fc_port_speed_names)
static int
show_fc_fc4s (char *buf, u8 *fc4_list)
{
int i, len=0;
for (i = 0; i < FC_FC4_LIST_SIZE; i++, fc4_list++)
len += sprintf(buf + len , "0x%02x ", *fc4_list);
len += sprintf(buf + len, "\n");
return len;
}
/* Convert FC_PORT_ROLE bit values to ascii string name */
static const struct {
u32 value;
char *name;
} fc_port_role_names[] = {
{ FC_PORT_ROLE_FCP_TARGET, "FCP Target" },
{ FC_PORT_ROLE_FCP_INITIATOR, "FCP Initiator" },
{ FC_PORT_ROLE_IP_PORT, "IP Port" },
};
fc_bitfield_name_search(port_roles, fc_port_role_names)
/*
* Define roles that are specific to port_id. Values are relative to ROLE_MASK.
*/
#define FC_WELLKNOWN_PORTID_MASK 0xfffff0
#define FC_WELLKNOWN_ROLE_MASK 0x00000f
#define FC_FPORT_PORTID 0x00000e
#define FC_FABCTLR_PORTID 0x00000d
#define FC_DIRSRVR_PORTID 0x00000c
#define FC_TIMESRVR_PORTID 0x00000b
#define FC_MGMTSRVR_PORTID 0x00000a
static void fc_timeout_deleted_rport(struct work_struct *work);
static void fc_timeout_fail_rport_io(struct work_struct *work);
static void fc_scsi_scan_rport(struct work_struct *work);
/*
* Attribute counts pre object type...
* Increase these values if you add attributes
*/
#define FC_STARGET_NUM_ATTRS 3
#define FC_RPORT_NUM_ATTRS 10
#define FC_VPORT_NUM_ATTRS 9
#define FC_HOST_NUM_ATTRS 21
struct fc_internal {
struct scsi_transport_template t;
struct fc_function_template *f;
/*
* For attributes : each object has :
* An array of the actual attributes structures
* An array of null-terminated pointers to the attribute
* structures - used for mid-layer interaction.
*
* The attribute containers for the starget and host are are
* part of the midlayer. As the remote port is specific to the
* fc transport, we must provide the attribute container.
*/
struct device_attribute private_starget_attrs[
FC_STARGET_NUM_ATTRS];
struct device_attribute *starget_attrs[FC_STARGET_NUM_ATTRS + 1];
struct device_attribute private_host_attrs[FC_HOST_NUM_ATTRS];
struct device_attribute *host_attrs[FC_HOST_NUM_ATTRS + 1];
struct transport_container rport_attr_cont;
struct device_attribute private_rport_attrs[FC_RPORT_NUM_ATTRS];
struct device_attribute *rport_attrs[FC_RPORT_NUM_ATTRS + 1];
struct transport_container vport_attr_cont;
struct device_attribute private_vport_attrs[FC_VPORT_NUM_ATTRS];
struct device_attribute *vport_attrs[FC_VPORT_NUM_ATTRS + 1];
};
#define to_fc_internal(tmpl) container_of(tmpl, struct fc_internal, t)
static int fc_target_setup(struct transport_container *tc, struct device *dev,
struct device *cdev)
{
struct scsi_target *starget = to_scsi_target(dev);
struct fc_rport *rport = starget_to_rport(starget);
/*
* if parent is remote port, use values from remote port.
* Otherwise, this host uses the fc_transport, but not the
* remote port interface. As such, initialize to known non-values.
*/
if (rport) {
fc_starget_node_name(starget) = rport->node_name;
fc_starget_port_name(starget) = rport->port_name;
fc_starget_port_id(starget) = rport->port_id;
} else {
fc_starget_node_name(starget) = -1;
fc_starget_port_name(starget) = -1;
fc_starget_port_id(starget) = -1;
}
return 0;
}
static DECLARE_TRANSPORT_CLASS(fc_transport_class,
"fc_transport",
fc_target_setup,
NULL,
NULL);
static int fc_host_setup(struct transport_container *tc, struct device *dev,
struct device *cdev)
{
struct Scsi_Host *shost = dev_to_shost(dev);
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
struct fc_host_attrs *fc_host = shost_to_fc_host(shost);
/*
* Set default values easily detected by the midlayer as
* failure cases. The scsi lldd is responsible for initializing
* all transport attributes to valid values per host.
*/
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
fc_host->node_name = -1;
fc_host->port_name = -1;
fc_host->permanent_port_name = -1;
fc_host->supported_classes = FC_COS_UNSPECIFIED;
memset(fc_host->supported_fc4s, 0,
sizeof(fc_host->supported_fc4s));
fc_host->supported_speeds = FC_PORTSPEED_UNKNOWN;
fc_host->maxframe_size = -1;
fc_host->max_npiv_vports = 0;
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
memset(fc_host->serial_number, 0,
sizeof(fc_host->serial_number));
fc_host->port_id = -1;
fc_host->port_type = FC_PORTTYPE_UNKNOWN;
fc_host->port_state = FC_PORTSTATE_UNKNOWN;
memset(fc_host->active_fc4s, 0,
sizeof(fc_host->active_fc4s));
fc_host->speed = FC_PORTSPEED_UNKNOWN;
fc_host->fabric_name = -1;
memset(fc_host->symbolic_name, 0, sizeof(fc_host->symbolic_name));
memset(fc_host->system_hostname, 0, sizeof(fc_host->system_hostname));
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
fc_host->tgtid_bind_type = FC_TGTID_BIND_BY_WWPN;
INIT_LIST_HEAD(&fc_host->rports);
INIT_LIST_HEAD(&fc_host->rport_bindings);
INIT_LIST_HEAD(&fc_host->vports);
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
fc_host->next_rport_number = 0;
fc_host->next_target_id = 0;
fc_host->next_vport_number = 0;
fc_host->npiv_vports_inuse = 0;
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
snprintf(fc_host->work_q_name, sizeof(fc_host->work_q_name),
"fc_wq_%d", shost->host_no);
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
fc_host->work_q = create_singlethread_workqueue(
fc_host->work_q_name);
if (!fc_host->work_q)
return -ENOMEM;
snprintf(fc_host->devloss_work_q_name,
sizeof(fc_host->devloss_work_q_name),
"fc_dl_%d", shost->host_no);
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
fc_host->devloss_work_q = create_singlethread_workqueue(
fc_host->devloss_work_q_name);
if (!fc_host->devloss_work_q) {
destroy_workqueue(fc_host->work_q);
fc_host->work_q = NULL;
return -ENOMEM;
}
return 0;
}
static DECLARE_TRANSPORT_CLASS(fc_host_class,
"fc_host",
fc_host_setup,
NULL,
NULL);
/*
* Setup and Remove actions for remote ports are handled
* in the service functions below.
*/
static DECLARE_TRANSPORT_CLASS(fc_rport_class,
"fc_remote_ports",
NULL,
NULL,
NULL);
/*
* Setup and Remove actions for virtual ports are handled
* in the service functions below.
*/
static DECLARE_TRANSPORT_CLASS(fc_vport_class,
"fc_vports",
NULL,
NULL,
NULL);
/*
* Module Parameters
*/
/*
* dev_loss_tmo: the default number of seconds that the FC transport
* should insulate the loss of a remote port.
* The maximum will be capped by the value of SCSI_DEVICE_BLOCK_MAX_TIMEOUT.
*/
static unsigned int fc_dev_loss_tmo = 60; /* seconds */
module_param_named(dev_loss_tmo, fc_dev_loss_tmo, uint, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(dev_loss_tmo,
"Maximum number of seconds that the FC transport should"
" insulate the loss of a remote port. Once this value is"
" exceeded, the scsi target is removed. Value should be"
" between 1 and SCSI_DEVICE_BLOCK_MAX_TIMEOUT.");
/*
[SCSI] SCSI and FC Transport: add netlink support for posting of transport events This patch formally adds support for the posting of FC events via netlink. It is a followup to the original RFC at: http://marc.theaimsgroup.com/?l=linux-scsi&m=114530667923464&w=2 and the initial posting at: http://marc.theaimsgroup.com/?l=linux-scsi&m=115507374832500&w=2 The patch has been updated to optimize the send path, per the discussions in the initial posting. Per discussions at the Storage Summit and at OLS, we are to use netlink for async events from transports. Also per discussions, to avoid a netlink protocol per transport, I've create a single NETLINK_SCSITRANSPORT protocol, which can then be used by all transports. This patch: - Creates new files scsi_netlink.c and scsi_netlink.h, which contains the single and shared definitions for the SCSI Transport. It is tied into the base SCSI subsystem intialization. Contains a single interface routine, scsi_send_transport_event(), for a transport to send an event (via multicast to a protocol specific group). - Creates a new scsi_netlink_fc.h file, which contains the FC netlink event messages - Adds 3 new routines to the fc transport: fc_get_event_number() - to get a FC event # fc_host_post_event() - to send a simple FC event (32 bits of data) fc_host_post_vendor_event() - to send a Vendor unique event, with arbitrary amounts of data. Note: the separation of event number allows for a LLD to send a standard event, followed by vendor-specific data for the event. Note: This patch assumes 2 prior fc transport patches have been installed: http://marc.theaimsgroup.com/?l=linux-scsi&m=115555807316329&w=2 http://marc.theaimsgroup.com/?l=linux-scsi&m=115581614930261&w=2 Sorry - next time I'll do something like making these individual patches of the same posting when I know they'll be posted closely together. Signed-off-by: James Smart <James.Smart@emulex.com> Tidy up configuration not to make SCSI always select NET Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-19 05:30:09 +08:00
* Netlink Infrastructure
*/
[SCSI] SCSI and FC Transport: add netlink support for posting of transport events This patch formally adds support for the posting of FC events via netlink. It is a followup to the original RFC at: http://marc.theaimsgroup.com/?l=linux-scsi&m=114530667923464&w=2 and the initial posting at: http://marc.theaimsgroup.com/?l=linux-scsi&m=115507374832500&w=2 The patch has been updated to optimize the send path, per the discussions in the initial posting. Per discussions at the Storage Summit and at OLS, we are to use netlink for async events from transports. Also per discussions, to avoid a netlink protocol per transport, I've create a single NETLINK_SCSITRANSPORT protocol, which can then be used by all transports. This patch: - Creates new files scsi_netlink.c and scsi_netlink.h, which contains the single and shared definitions for the SCSI Transport. It is tied into the base SCSI subsystem intialization. Contains a single interface routine, scsi_send_transport_event(), for a transport to send an event (via multicast to a protocol specific group). - Creates a new scsi_netlink_fc.h file, which contains the FC netlink event messages - Adds 3 new routines to the fc transport: fc_get_event_number() - to get a FC event # fc_host_post_event() - to send a simple FC event (32 bits of data) fc_host_post_vendor_event() - to send a Vendor unique event, with arbitrary amounts of data. Note: the separation of event number allows for a LLD to send a standard event, followed by vendor-specific data for the event. Note: This patch assumes 2 prior fc transport patches have been installed: http://marc.theaimsgroup.com/?l=linux-scsi&m=115555807316329&w=2 http://marc.theaimsgroup.com/?l=linux-scsi&m=115581614930261&w=2 Sorry - next time I'll do something like making these individual patches of the same posting when I know they'll be posted closely together. Signed-off-by: James Smart <James.Smart@emulex.com> Tidy up configuration not to make SCSI always select NET Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-19 05:30:09 +08:00
static atomic_t fc_event_seq;
/**
* fc_get_event_number - Obtain the next sequential FC event number
*
* Notes:
* We could have inlined this, but it would have required fc_event_seq to
[SCSI] SCSI and FC Transport: add netlink support for posting of transport events This patch formally adds support for the posting of FC events via netlink. It is a followup to the original RFC at: http://marc.theaimsgroup.com/?l=linux-scsi&m=114530667923464&w=2 and the initial posting at: http://marc.theaimsgroup.com/?l=linux-scsi&m=115507374832500&w=2 The patch has been updated to optimize the send path, per the discussions in the initial posting. Per discussions at the Storage Summit and at OLS, we are to use netlink for async events from transports. Also per discussions, to avoid a netlink protocol per transport, I've create a single NETLINK_SCSITRANSPORT protocol, which can then be used by all transports. This patch: - Creates new files scsi_netlink.c and scsi_netlink.h, which contains the single and shared definitions for the SCSI Transport. It is tied into the base SCSI subsystem intialization. Contains a single interface routine, scsi_send_transport_event(), for a transport to send an event (via multicast to a protocol specific group). - Creates a new scsi_netlink_fc.h file, which contains the FC netlink event messages - Adds 3 new routines to the fc transport: fc_get_event_number() - to get a FC event # fc_host_post_event() - to send a simple FC event (32 bits of data) fc_host_post_vendor_event() - to send a Vendor unique event, with arbitrary amounts of data. Note: the separation of event number allows for a LLD to send a standard event, followed by vendor-specific data for the event. Note: This patch assumes 2 prior fc transport patches have been installed: http://marc.theaimsgroup.com/?l=linux-scsi&m=115555807316329&w=2 http://marc.theaimsgroup.com/?l=linux-scsi&m=115581614930261&w=2 Sorry - next time I'll do something like making these individual patches of the same posting when I know they'll be posted closely together. Signed-off-by: James Smart <James.Smart@emulex.com> Tidy up configuration not to make SCSI always select NET Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-19 05:30:09 +08:00
* be exposed. For now, live with the subroutine call.
* Atomic used to avoid lock/unlock...
*/
[SCSI] SCSI and FC Transport: add netlink support for posting of transport events This patch formally adds support for the posting of FC events via netlink. It is a followup to the original RFC at: http://marc.theaimsgroup.com/?l=linux-scsi&m=114530667923464&w=2 and the initial posting at: http://marc.theaimsgroup.com/?l=linux-scsi&m=115507374832500&w=2 The patch has been updated to optimize the send path, per the discussions in the initial posting. Per discussions at the Storage Summit and at OLS, we are to use netlink for async events from transports. Also per discussions, to avoid a netlink protocol per transport, I've create a single NETLINK_SCSITRANSPORT protocol, which can then be used by all transports. This patch: - Creates new files scsi_netlink.c and scsi_netlink.h, which contains the single and shared definitions for the SCSI Transport. It is tied into the base SCSI subsystem intialization. Contains a single interface routine, scsi_send_transport_event(), for a transport to send an event (via multicast to a protocol specific group). - Creates a new scsi_netlink_fc.h file, which contains the FC netlink event messages - Adds 3 new routines to the fc transport: fc_get_event_number() - to get a FC event # fc_host_post_event() - to send a simple FC event (32 bits of data) fc_host_post_vendor_event() - to send a Vendor unique event, with arbitrary amounts of data. Note: the separation of event number allows for a LLD to send a standard event, followed by vendor-specific data for the event. Note: This patch assumes 2 prior fc transport patches have been installed: http://marc.theaimsgroup.com/?l=linux-scsi&m=115555807316329&w=2 http://marc.theaimsgroup.com/?l=linux-scsi&m=115581614930261&w=2 Sorry - next time I'll do something like making these individual patches of the same posting when I know they'll be posted closely together. Signed-off-by: James Smart <James.Smart@emulex.com> Tidy up configuration not to make SCSI always select NET Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-19 05:30:09 +08:00
u32
fc_get_event_number(void)
{
return atomic_add_return(1, &fc_event_seq);
}
EXPORT_SYMBOL(fc_get_event_number);
/**
* fc_host_post_event - called to post an even on an fc_host.
* @shost: host the event occurred on
* @event_number: fc event number obtained from get_fc_event_number()
* @event_code: fc_host event being posted
* @event_data: 32bits of data for the event being posted
*
* Notes:
* This routine assumes no locks are held on entry.
*/
[SCSI] SCSI and FC Transport: add netlink support for posting of transport events This patch formally adds support for the posting of FC events via netlink. It is a followup to the original RFC at: http://marc.theaimsgroup.com/?l=linux-scsi&m=114530667923464&w=2 and the initial posting at: http://marc.theaimsgroup.com/?l=linux-scsi&m=115507374832500&w=2 The patch has been updated to optimize the send path, per the discussions in the initial posting. Per discussions at the Storage Summit and at OLS, we are to use netlink for async events from transports. Also per discussions, to avoid a netlink protocol per transport, I've create a single NETLINK_SCSITRANSPORT protocol, which can then be used by all transports. This patch: - Creates new files scsi_netlink.c and scsi_netlink.h, which contains the single and shared definitions for the SCSI Transport. It is tied into the base SCSI subsystem intialization. Contains a single interface routine, scsi_send_transport_event(), for a transport to send an event (via multicast to a protocol specific group). - Creates a new scsi_netlink_fc.h file, which contains the FC netlink event messages - Adds 3 new routines to the fc transport: fc_get_event_number() - to get a FC event # fc_host_post_event() - to send a simple FC event (32 bits of data) fc_host_post_vendor_event() - to send a Vendor unique event, with arbitrary amounts of data. Note: the separation of event number allows for a LLD to send a standard event, followed by vendor-specific data for the event. Note: This patch assumes 2 prior fc transport patches have been installed: http://marc.theaimsgroup.com/?l=linux-scsi&m=115555807316329&w=2 http://marc.theaimsgroup.com/?l=linux-scsi&m=115581614930261&w=2 Sorry - next time I'll do something like making these individual patches of the same posting when I know they'll be posted closely together. Signed-off-by: James Smart <James.Smart@emulex.com> Tidy up configuration not to make SCSI always select NET Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-19 05:30:09 +08:00
void
fc_host_post_event(struct Scsi_Host *shost, u32 event_number,
enum fc_host_event_code event_code, u32 event_data)
{
struct sk_buff *skb;
struct nlmsghdr *nlh;
struct fc_nl_event *event;
const char *name;
u32 len, skblen;
int err;
if (!scsi_nl_sock) {
err = -ENOENT;
goto send_fail;
}
len = FC_NL_MSGALIGN(sizeof(*event));
skblen = NLMSG_SPACE(len);
skb = alloc_skb(skblen, GFP_KERNEL);
if (!skb) {
err = -ENOBUFS;
goto send_fail;
}
nlh = nlmsg_put(skb, 0, 0, SCSI_TRANSPORT_MSG,
skblen - sizeof(*nlh), 0);
if (!nlh) {
err = -ENOBUFS;
goto send_fail_skb;
}
event = NLMSG_DATA(nlh);
INIT_SCSI_NL_HDR(&event->snlh, SCSI_NL_TRANSPORT_FC,
FC_NL_ASYNC_EVENT, len);
event->seconds = get_seconds();
event->vendor_id = 0;
event->host_no = shost->host_no;
event->event_datalen = sizeof(u32); /* bytes */
event->event_num = event_number;
event->event_code = event_code;
event->event_data = event_data;
err = nlmsg_multicast(scsi_nl_sock, skb, 0, SCSI_NL_GRP_FC_EVENTS,
GFP_KERNEL);
[SCSI] SCSI and FC Transport: add netlink support for posting of transport events This patch formally adds support for the posting of FC events via netlink. It is a followup to the original RFC at: http://marc.theaimsgroup.com/?l=linux-scsi&m=114530667923464&w=2 and the initial posting at: http://marc.theaimsgroup.com/?l=linux-scsi&m=115507374832500&w=2 The patch has been updated to optimize the send path, per the discussions in the initial posting. Per discussions at the Storage Summit and at OLS, we are to use netlink for async events from transports. Also per discussions, to avoid a netlink protocol per transport, I've create a single NETLINK_SCSITRANSPORT protocol, which can then be used by all transports. This patch: - Creates new files scsi_netlink.c and scsi_netlink.h, which contains the single and shared definitions for the SCSI Transport. It is tied into the base SCSI subsystem intialization. Contains a single interface routine, scsi_send_transport_event(), for a transport to send an event (via multicast to a protocol specific group). - Creates a new scsi_netlink_fc.h file, which contains the FC netlink event messages - Adds 3 new routines to the fc transport: fc_get_event_number() - to get a FC event # fc_host_post_event() - to send a simple FC event (32 bits of data) fc_host_post_vendor_event() - to send a Vendor unique event, with arbitrary amounts of data. Note: the separation of event number allows for a LLD to send a standard event, followed by vendor-specific data for the event. Note: This patch assumes 2 prior fc transport patches have been installed: http://marc.theaimsgroup.com/?l=linux-scsi&m=115555807316329&w=2 http://marc.theaimsgroup.com/?l=linux-scsi&m=115581614930261&w=2 Sorry - next time I'll do something like making these individual patches of the same posting when I know they'll be posted closely together. Signed-off-by: James Smart <James.Smart@emulex.com> Tidy up configuration not to make SCSI always select NET Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-19 05:30:09 +08:00
if (err && (err != -ESRCH)) /* filter no recipient errors */
/* nlmsg_multicast already kfree_skb'd */
goto send_fail;
return;
send_fail_skb:
kfree_skb(skb);
send_fail:
name = get_fc_host_event_code_name(event_code);
printk(KERN_WARNING
"%s: Dropped Event : host %d %s data 0x%08x - err %d\n",
__func__, shost->host_no,
[SCSI] SCSI and FC Transport: add netlink support for posting of transport events This patch formally adds support for the posting of FC events via netlink. It is a followup to the original RFC at: http://marc.theaimsgroup.com/?l=linux-scsi&m=114530667923464&w=2 and the initial posting at: http://marc.theaimsgroup.com/?l=linux-scsi&m=115507374832500&w=2 The patch has been updated to optimize the send path, per the discussions in the initial posting. Per discussions at the Storage Summit and at OLS, we are to use netlink for async events from transports. Also per discussions, to avoid a netlink protocol per transport, I've create a single NETLINK_SCSITRANSPORT protocol, which can then be used by all transports. This patch: - Creates new files scsi_netlink.c and scsi_netlink.h, which contains the single and shared definitions for the SCSI Transport. It is tied into the base SCSI subsystem intialization. Contains a single interface routine, scsi_send_transport_event(), for a transport to send an event (via multicast to a protocol specific group). - Creates a new scsi_netlink_fc.h file, which contains the FC netlink event messages - Adds 3 new routines to the fc transport: fc_get_event_number() - to get a FC event # fc_host_post_event() - to send a simple FC event (32 bits of data) fc_host_post_vendor_event() - to send a Vendor unique event, with arbitrary amounts of data. Note: the separation of event number allows for a LLD to send a standard event, followed by vendor-specific data for the event. Note: This patch assumes 2 prior fc transport patches have been installed: http://marc.theaimsgroup.com/?l=linux-scsi&m=115555807316329&w=2 http://marc.theaimsgroup.com/?l=linux-scsi&m=115581614930261&w=2 Sorry - next time I'll do something like making these individual patches of the same posting when I know they'll be posted closely together. Signed-off-by: James Smart <James.Smart@emulex.com> Tidy up configuration not to make SCSI always select NET Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-19 05:30:09 +08:00
(name) ? name : "<unknown>", event_data, err);
return;
}
EXPORT_SYMBOL(fc_host_post_event);
/**
* fc_host_post_vendor_event - called to post a vendor unique event on an fc_host
[SCSI] SCSI and FC Transport: add netlink support for posting of transport events This patch formally adds support for the posting of FC events via netlink. It is a followup to the original RFC at: http://marc.theaimsgroup.com/?l=linux-scsi&m=114530667923464&w=2 and the initial posting at: http://marc.theaimsgroup.com/?l=linux-scsi&m=115507374832500&w=2 The patch has been updated to optimize the send path, per the discussions in the initial posting. Per discussions at the Storage Summit and at OLS, we are to use netlink for async events from transports. Also per discussions, to avoid a netlink protocol per transport, I've create a single NETLINK_SCSITRANSPORT protocol, which can then be used by all transports. This patch: - Creates new files scsi_netlink.c and scsi_netlink.h, which contains the single and shared definitions for the SCSI Transport. It is tied into the base SCSI subsystem intialization. Contains a single interface routine, scsi_send_transport_event(), for a transport to send an event (via multicast to a protocol specific group). - Creates a new scsi_netlink_fc.h file, which contains the FC netlink event messages - Adds 3 new routines to the fc transport: fc_get_event_number() - to get a FC event # fc_host_post_event() - to send a simple FC event (32 bits of data) fc_host_post_vendor_event() - to send a Vendor unique event, with arbitrary amounts of data. Note: the separation of event number allows for a LLD to send a standard event, followed by vendor-specific data for the event. Note: This patch assumes 2 prior fc transport patches have been installed: http://marc.theaimsgroup.com/?l=linux-scsi&m=115555807316329&w=2 http://marc.theaimsgroup.com/?l=linux-scsi&m=115581614930261&w=2 Sorry - next time I'll do something like making these individual patches of the same posting when I know they'll be posted closely together. Signed-off-by: James Smart <James.Smart@emulex.com> Tidy up configuration not to make SCSI always select NET Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-19 05:30:09 +08:00
* @shost: host the event occurred on
* @event_number: fc event number obtained from get_fc_event_number()
* @data_len: amount, in bytes, of vendor unique data
* @data_buf: pointer to vendor unique data
* @vendor_id: Vendor id
[SCSI] SCSI and FC Transport: add netlink support for posting of transport events This patch formally adds support for the posting of FC events via netlink. It is a followup to the original RFC at: http://marc.theaimsgroup.com/?l=linux-scsi&m=114530667923464&w=2 and the initial posting at: http://marc.theaimsgroup.com/?l=linux-scsi&m=115507374832500&w=2 The patch has been updated to optimize the send path, per the discussions in the initial posting. Per discussions at the Storage Summit and at OLS, we are to use netlink for async events from transports. Also per discussions, to avoid a netlink protocol per transport, I've create a single NETLINK_SCSITRANSPORT protocol, which can then be used by all transports. This patch: - Creates new files scsi_netlink.c and scsi_netlink.h, which contains the single and shared definitions for the SCSI Transport. It is tied into the base SCSI subsystem intialization. Contains a single interface routine, scsi_send_transport_event(), for a transport to send an event (via multicast to a protocol specific group). - Creates a new scsi_netlink_fc.h file, which contains the FC netlink event messages - Adds 3 new routines to the fc transport: fc_get_event_number() - to get a FC event # fc_host_post_event() - to send a simple FC event (32 bits of data) fc_host_post_vendor_event() - to send a Vendor unique event, with arbitrary amounts of data. Note: the separation of event number allows for a LLD to send a standard event, followed by vendor-specific data for the event. Note: This patch assumes 2 prior fc transport patches have been installed: http://marc.theaimsgroup.com/?l=linux-scsi&m=115555807316329&w=2 http://marc.theaimsgroup.com/?l=linux-scsi&m=115581614930261&w=2 Sorry - next time I'll do something like making these individual patches of the same posting when I know they'll be posted closely together. Signed-off-by: James Smart <James.Smart@emulex.com> Tidy up configuration not to make SCSI always select NET Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-19 05:30:09 +08:00
*
* Notes:
* This routine assumes no locks are held on entry.
*/
[SCSI] SCSI and FC Transport: add netlink support for posting of transport events This patch formally adds support for the posting of FC events via netlink. It is a followup to the original RFC at: http://marc.theaimsgroup.com/?l=linux-scsi&m=114530667923464&w=2 and the initial posting at: http://marc.theaimsgroup.com/?l=linux-scsi&m=115507374832500&w=2 The patch has been updated to optimize the send path, per the discussions in the initial posting. Per discussions at the Storage Summit and at OLS, we are to use netlink for async events from transports. Also per discussions, to avoid a netlink protocol per transport, I've create a single NETLINK_SCSITRANSPORT protocol, which can then be used by all transports. This patch: - Creates new files scsi_netlink.c and scsi_netlink.h, which contains the single and shared definitions for the SCSI Transport. It is tied into the base SCSI subsystem intialization. Contains a single interface routine, scsi_send_transport_event(), for a transport to send an event (via multicast to a protocol specific group). - Creates a new scsi_netlink_fc.h file, which contains the FC netlink event messages - Adds 3 new routines to the fc transport: fc_get_event_number() - to get a FC event # fc_host_post_event() - to send a simple FC event (32 bits of data) fc_host_post_vendor_event() - to send a Vendor unique event, with arbitrary amounts of data. Note: the separation of event number allows for a LLD to send a standard event, followed by vendor-specific data for the event. Note: This patch assumes 2 prior fc transport patches have been installed: http://marc.theaimsgroup.com/?l=linux-scsi&m=115555807316329&w=2 http://marc.theaimsgroup.com/?l=linux-scsi&m=115581614930261&w=2 Sorry - next time I'll do something like making these individual patches of the same posting when I know they'll be posted closely together. Signed-off-by: James Smart <James.Smart@emulex.com> Tidy up configuration not to make SCSI always select NET Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-19 05:30:09 +08:00
void
fc_host_post_vendor_event(struct Scsi_Host *shost, u32 event_number,
u32 data_len, char * data_buf, u64 vendor_id)
[SCSI] SCSI and FC Transport: add netlink support for posting of transport events This patch formally adds support for the posting of FC events via netlink. It is a followup to the original RFC at: http://marc.theaimsgroup.com/?l=linux-scsi&m=114530667923464&w=2 and the initial posting at: http://marc.theaimsgroup.com/?l=linux-scsi&m=115507374832500&w=2 The patch has been updated to optimize the send path, per the discussions in the initial posting. Per discussions at the Storage Summit and at OLS, we are to use netlink for async events from transports. Also per discussions, to avoid a netlink protocol per transport, I've create a single NETLINK_SCSITRANSPORT protocol, which can then be used by all transports. This patch: - Creates new files scsi_netlink.c and scsi_netlink.h, which contains the single and shared definitions for the SCSI Transport. It is tied into the base SCSI subsystem intialization. Contains a single interface routine, scsi_send_transport_event(), for a transport to send an event (via multicast to a protocol specific group). - Creates a new scsi_netlink_fc.h file, which contains the FC netlink event messages - Adds 3 new routines to the fc transport: fc_get_event_number() - to get a FC event # fc_host_post_event() - to send a simple FC event (32 bits of data) fc_host_post_vendor_event() - to send a Vendor unique event, with arbitrary amounts of data. Note: the separation of event number allows for a LLD to send a standard event, followed by vendor-specific data for the event. Note: This patch assumes 2 prior fc transport patches have been installed: http://marc.theaimsgroup.com/?l=linux-scsi&m=115555807316329&w=2 http://marc.theaimsgroup.com/?l=linux-scsi&m=115581614930261&w=2 Sorry - next time I'll do something like making these individual patches of the same posting when I know they'll be posted closely together. Signed-off-by: James Smart <James.Smart@emulex.com> Tidy up configuration not to make SCSI always select NET Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-19 05:30:09 +08:00
{
struct sk_buff *skb;
struct nlmsghdr *nlh;
struct fc_nl_event *event;
u32 len, skblen;
int err;
if (!scsi_nl_sock) {
err = -ENOENT;
goto send_vendor_fail;
}
len = FC_NL_MSGALIGN(sizeof(*event) + data_len);
skblen = NLMSG_SPACE(len);
skb = alloc_skb(skblen, GFP_KERNEL);
if (!skb) {
err = -ENOBUFS;
goto send_vendor_fail;
}
nlh = nlmsg_put(skb, 0, 0, SCSI_TRANSPORT_MSG,
skblen - sizeof(*nlh), 0);
if (!nlh) {
err = -ENOBUFS;
goto send_vendor_fail_skb;
}
event = NLMSG_DATA(nlh);
INIT_SCSI_NL_HDR(&event->snlh, SCSI_NL_TRANSPORT_FC,
FC_NL_ASYNC_EVENT, len);
event->seconds = get_seconds();
event->vendor_id = vendor_id;
event->host_no = shost->host_no;
event->event_datalen = data_len; /* bytes */
event->event_num = event_number;
event->event_code = FCH_EVT_VENDOR_UNIQUE;
memcpy(&event->event_data, data_buf, data_len);
err = nlmsg_multicast(scsi_nl_sock, skb, 0, SCSI_NL_GRP_FC_EVENTS,
GFP_KERNEL);
[SCSI] SCSI and FC Transport: add netlink support for posting of transport events This patch formally adds support for the posting of FC events via netlink. It is a followup to the original RFC at: http://marc.theaimsgroup.com/?l=linux-scsi&m=114530667923464&w=2 and the initial posting at: http://marc.theaimsgroup.com/?l=linux-scsi&m=115507374832500&w=2 The patch has been updated to optimize the send path, per the discussions in the initial posting. Per discussions at the Storage Summit and at OLS, we are to use netlink for async events from transports. Also per discussions, to avoid a netlink protocol per transport, I've create a single NETLINK_SCSITRANSPORT protocol, which can then be used by all transports. This patch: - Creates new files scsi_netlink.c and scsi_netlink.h, which contains the single and shared definitions for the SCSI Transport. It is tied into the base SCSI subsystem intialization. Contains a single interface routine, scsi_send_transport_event(), for a transport to send an event (via multicast to a protocol specific group). - Creates a new scsi_netlink_fc.h file, which contains the FC netlink event messages - Adds 3 new routines to the fc transport: fc_get_event_number() - to get a FC event # fc_host_post_event() - to send a simple FC event (32 bits of data) fc_host_post_vendor_event() - to send a Vendor unique event, with arbitrary amounts of data. Note: the separation of event number allows for a LLD to send a standard event, followed by vendor-specific data for the event. Note: This patch assumes 2 prior fc transport patches have been installed: http://marc.theaimsgroup.com/?l=linux-scsi&m=115555807316329&w=2 http://marc.theaimsgroup.com/?l=linux-scsi&m=115581614930261&w=2 Sorry - next time I'll do something like making these individual patches of the same posting when I know they'll be posted closely together. Signed-off-by: James Smart <James.Smart@emulex.com> Tidy up configuration not to make SCSI always select NET Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-19 05:30:09 +08:00
if (err && (err != -ESRCH)) /* filter no recipient errors */
/* nlmsg_multicast already kfree_skb'd */
goto send_vendor_fail;
return;
send_vendor_fail_skb:
kfree_skb(skb);
send_vendor_fail:
printk(KERN_WARNING
"%s: Dropped Event : host %d vendor_unique - err %d\n",
__func__, shost->host_no, err);
[SCSI] SCSI and FC Transport: add netlink support for posting of transport events This patch formally adds support for the posting of FC events via netlink. It is a followup to the original RFC at: http://marc.theaimsgroup.com/?l=linux-scsi&m=114530667923464&w=2 and the initial posting at: http://marc.theaimsgroup.com/?l=linux-scsi&m=115507374832500&w=2 The patch has been updated to optimize the send path, per the discussions in the initial posting. Per discussions at the Storage Summit and at OLS, we are to use netlink for async events from transports. Also per discussions, to avoid a netlink protocol per transport, I've create a single NETLINK_SCSITRANSPORT protocol, which can then be used by all transports. This patch: - Creates new files scsi_netlink.c and scsi_netlink.h, which contains the single and shared definitions for the SCSI Transport. It is tied into the base SCSI subsystem intialization. Contains a single interface routine, scsi_send_transport_event(), for a transport to send an event (via multicast to a protocol specific group). - Creates a new scsi_netlink_fc.h file, which contains the FC netlink event messages - Adds 3 new routines to the fc transport: fc_get_event_number() - to get a FC event # fc_host_post_event() - to send a simple FC event (32 bits of data) fc_host_post_vendor_event() - to send a Vendor unique event, with arbitrary amounts of data. Note: the separation of event number allows for a LLD to send a standard event, followed by vendor-specific data for the event. Note: This patch assumes 2 prior fc transport patches have been installed: http://marc.theaimsgroup.com/?l=linux-scsi&m=115555807316329&w=2 http://marc.theaimsgroup.com/?l=linux-scsi&m=115581614930261&w=2 Sorry - next time I'll do something like making these individual patches of the same posting when I know they'll be posted closely together. Signed-off-by: James Smart <James.Smart@emulex.com> Tidy up configuration not to make SCSI always select NET Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-19 05:30:09 +08:00
return;
}
EXPORT_SYMBOL(fc_host_post_vendor_event);
static __init int fc_transport_init(void)
{
[SCSI] SCSI and FC Transport: add netlink support for posting of transport events This patch formally adds support for the posting of FC events via netlink. It is a followup to the original RFC at: http://marc.theaimsgroup.com/?l=linux-scsi&m=114530667923464&w=2 and the initial posting at: http://marc.theaimsgroup.com/?l=linux-scsi&m=115507374832500&w=2 The patch has been updated to optimize the send path, per the discussions in the initial posting. Per discussions at the Storage Summit and at OLS, we are to use netlink for async events from transports. Also per discussions, to avoid a netlink protocol per transport, I've create a single NETLINK_SCSITRANSPORT protocol, which can then be used by all transports. This patch: - Creates new files scsi_netlink.c and scsi_netlink.h, which contains the single and shared definitions for the SCSI Transport. It is tied into the base SCSI subsystem intialization. Contains a single interface routine, scsi_send_transport_event(), for a transport to send an event (via multicast to a protocol specific group). - Creates a new scsi_netlink_fc.h file, which contains the FC netlink event messages - Adds 3 new routines to the fc transport: fc_get_event_number() - to get a FC event # fc_host_post_event() - to send a simple FC event (32 bits of data) fc_host_post_vendor_event() - to send a Vendor unique event, with arbitrary amounts of data. Note: the separation of event number allows for a LLD to send a standard event, followed by vendor-specific data for the event. Note: This patch assumes 2 prior fc transport patches have been installed: http://marc.theaimsgroup.com/?l=linux-scsi&m=115555807316329&w=2 http://marc.theaimsgroup.com/?l=linux-scsi&m=115581614930261&w=2 Sorry - next time I'll do something like making these individual patches of the same posting when I know they'll be posted closely together. Signed-off-by: James Smart <James.Smart@emulex.com> Tidy up configuration not to make SCSI always select NET Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-19 05:30:09 +08:00
int error;
atomic_set(&fc_event_seq, 0);
error = transport_class_register(&fc_host_class);
if (error)
return error;
error = transport_class_register(&fc_vport_class);
if (error)
return error;
error = transport_class_register(&fc_rport_class);
if (error)
return error;
return transport_class_register(&fc_transport_class);
}
static void __exit fc_transport_exit(void)
{
transport_class_unregister(&fc_transport_class);
transport_class_unregister(&fc_rport_class);
transport_class_unregister(&fc_host_class);
transport_class_unregister(&fc_vport_class);
}
/*
* FC Remote Port Attribute Management
*/
#define fc_rport_show_function(field, format_string, sz, cast) \
static ssize_t \
show_fc_rport_##field (struct device *dev, \
struct device_attribute *attr, char *buf) \
{ \
struct fc_rport *rport = transport_class_to_rport(dev); \
struct Scsi_Host *shost = rport_to_shost(rport); \
struct fc_internal *i = to_fc_internal(shost->transportt); \
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
if ((i->f->get_rport_##field) && \
!((rport->port_state == FC_PORTSTATE_BLOCKED) || \
(rport->port_state == FC_PORTSTATE_DELETED) || \
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
(rport->port_state == FC_PORTSTATE_NOTPRESENT))) \
i->f->get_rport_##field(rport); \
return snprintf(buf, sz, format_string, cast rport->field); \
}
#define fc_rport_store_function(field) \
static ssize_t \
store_fc_rport_##field(struct device *dev, \
struct device_attribute *attr, \
const char *buf, size_t count) \
{ \
int val; \
struct fc_rport *rport = transport_class_to_rport(dev); \
struct Scsi_Host *shost = rport_to_shost(rport); \
struct fc_internal *i = to_fc_internal(shost->transportt); \
char *cp; \
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
if ((rport->port_state == FC_PORTSTATE_BLOCKED) || \
(rport->port_state == FC_PORTSTATE_DELETED) || \
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
(rport->port_state == FC_PORTSTATE_NOTPRESENT)) \
return -EBUSY; \
val = simple_strtoul(buf, &cp, 0); \
if (*cp && (*cp != '\n')) \
return -EINVAL; \
i->f->set_rport_##field(rport, val); \
return count; \
}
#define fc_rport_rd_attr(field, format_string, sz) \
fc_rport_show_function(field, format_string, sz, ) \
static FC_DEVICE_ATTR(rport, field, S_IRUGO, \
show_fc_rport_##field, NULL)
#define fc_rport_rd_attr_cast(field, format_string, sz, cast) \
fc_rport_show_function(field, format_string, sz, (cast)) \
static FC_DEVICE_ATTR(rport, field, S_IRUGO, \
show_fc_rport_##field, NULL)
#define fc_rport_rw_attr(field, format_string, sz) \
fc_rport_show_function(field, format_string, sz, ) \
fc_rport_store_function(field) \
static FC_DEVICE_ATTR(rport, field, S_IRUGO | S_IWUSR, \
show_fc_rport_##field, \
store_fc_rport_##field)
#define fc_private_rport_show_function(field, format_string, sz, cast) \
static ssize_t \
show_fc_rport_##field (struct device *dev, \
struct device_attribute *attr, char *buf) \
{ \
struct fc_rport *rport = transport_class_to_rport(dev); \
return snprintf(buf, sz, format_string, cast rport->field); \
}
#define fc_private_rport_rd_attr(field, format_string, sz) \
fc_private_rport_show_function(field, format_string, sz, ) \
static FC_DEVICE_ATTR(rport, field, S_IRUGO, \
show_fc_rport_##field, NULL)
#define fc_private_rport_rd_attr_cast(field, format_string, sz, cast) \
fc_private_rport_show_function(field, format_string, sz, (cast)) \
static FC_DEVICE_ATTR(rport, field, S_IRUGO, \
show_fc_rport_##field, NULL)
#define fc_private_rport_rd_enum_attr(title, maxlen) \
static ssize_t \
show_fc_rport_##title (struct device *dev, \
struct device_attribute *attr, char *buf) \
{ \
struct fc_rport *rport = transport_class_to_rport(dev); \
const char *name; \
name = get_fc_##title##_name(rport->title); \
if (!name) \
return -EINVAL; \
return snprintf(buf, maxlen, "%s\n", name); \
} \
static FC_DEVICE_ATTR(rport, title, S_IRUGO, \
show_fc_rport_##title, NULL)
#define SETUP_RPORT_ATTRIBUTE_RD(field) \
i->private_rport_attrs[count] = device_attr_rport_##field; \
i->private_rport_attrs[count].attr.mode = S_IRUGO; \
i->private_rport_attrs[count].store = NULL; \
i->rport_attrs[count] = &i->private_rport_attrs[count]; \
if (i->f->show_rport_##field) \
count++
#define SETUP_PRIVATE_RPORT_ATTRIBUTE_RD(field) \
i->private_rport_attrs[count] = device_attr_rport_##field; \
i->private_rport_attrs[count].attr.mode = S_IRUGO; \
i->private_rport_attrs[count].store = NULL; \
i->rport_attrs[count] = &i->private_rport_attrs[count]; \
count++
#define SETUP_RPORT_ATTRIBUTE_RW(field) \
i->private_rport_attrs[count] = device_attr_rport_##field; \
if (!i->f->set_rport_##field) { \
i->private_rport_attrs[count].attr.mode = S_IRUGO; \
i->private_rport_attrs[count].store = NULL; \
} \
i->rport_attrs[count] = &i->private_rport_attrs[count]; \
if (i->f->show_rport_##field) \
count++
#define SETUP_PRIVATE_RPORT_ATTRIBUTE_RW(field) \
{ \
i->private_rport_attrs[count] = device_attr_rport_##field; \
i->rport_attrs[count] = &i->private_rport_attrs[count]; \
count++; \
}
/* The FC Transport Remote Port Attributes: */
/* Fixed Remote Port Attributes */
fc_private_rport_rd_attr(maxframe_size, "%u bytes\n", 20);
static ssize_t
show_fc_rport_supported_classes (struct device *dev,
struct device_attribute *attr, char *buf)
{
struct fc_rport *rport = transport_class_to_rport(dev);
if (rport->supported_classes == FC_COS_UNSPECIFIED)
return snprintf(buf, 20, "unspecified\n");
return get_fc_cos_names(rport->supported_classes, buf);
}
static FC_DEVICE_ATTR(rport, supported_classes, S_IRUGO,
show_fc_rport_supported_classes, NULL);
/* Dynamic Remote Port Attributes */
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
/*
* dev_loss_tmo attribute
*/
fc_rport_show_function(dev_loss_tmo, "%d\n", 20, )
static ssize_t
store_fc_rport_dev_loss_tmo(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
{
int val;
struct fc_rport *rport = transport_class_to_rport(dev);
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
struct Scsi_Host *shost = rport_to_shost(rport);
struct fc_internal *i = to_fc_internal(shost->transportt);
char *cp;
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
if ((rport->port_state == FC_PORTSTATE_BLOCKED) ||
(rport->port_state == FC_PORTSTATE_DELETED) ||
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
(rport->port_state == FC_PORTSTATE_NOTPRESENT))
return -EBUSY;
val = simple_strtoul(buf, &cp, 0);
if ((*cp && (*cp != '\n')) ||
(val < 0) || (val > SCSI_DEVICE_BLOCK_MAX_TIMEOUT))
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
return -EINVAL;
i->f->set_rport_dev_loss_tmo(rport, val);
return count;
}
static FC_DEVICE_ATTR(rport, dev_loss_tmo, S_IRUGO | S_IWUSR,
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
show_fc_rport_dev_loss_tmo, store_fc_rport_dev_loss_tmo);
/* Private Remote Port Attributes */
fc_private_rport_rd_attr_cast(node_name, "0x%llx\n", 20, unsigned long long);
fc_private_rport_rd_attr_cast(port_name, "0x%llx\n", 20, unsigned long long);
fc_private_rport_rd_attr(port_id, "0x%06x\n", 20);
static ssize_t
show_fc_rport_roles (struct device *dev, struct device_attribute *attr,
char *buf)
{
struct fc_rport *rport = transport_class_to_rport(dev);
/* identify any roles that are port_id specific */
if ((rport->port_id != -1) &&
(rport->port_id & FC_WELLKNOWN_PORTID_MASK) ==
FC_WELLKNOWN_PORTID_MASK) {
switch (rport->port_id & FC_WELLKNOWN_ROLE_MASK) {
case FC_FPORT_PORTID:
return snprintf(buf, 30, "Fabric Port\n");
case FC_FABCTLR_PORTID:
return snprintf(buf, 30, "Fabric Controller\n");
case FC_DIRSRVR_PORTID:
return snprintf(buf, 30, "Directory Server\n");
case FC_TIMESRVR_PORTID:
return snprintf(buf, 30, "Time Server\n");
case FC_MGMTSRVR_PORTID:
return snprintf(buf, 30, "Management Server\n");
default:
return snprintf(buf, 30, "Unknown Fabric Entity\n");
}
} else {
if (rport->roles == FC_PORT_ROLE_UNKNOWN)
return snprintf(buf, 20, "unknown\n");
return get_fc_port_roles_names(rport->roles, buf);
}
}
static FC_DEVICE_ATTR(rport, roles, S_IRUGO,
show_fc_rport_roles, NULL);
fc_private_rport_rd_enum_attr(port_state, FC_PORTSTATE_MAX_NAMELEN);
fc_private_rport_rd_attr(scsi_target_id, "%d\n", 20);
/*
* fast_io_fail_tmo attribute
*/
static ssize_t
show_fc_rport_fast_io_fail_tmo (struct device *dev,
struct device_attribute *attr, char *buf)
{
struct fc_rport *rport = transport_class_to_rport(dev);
if (rport->fast_io_fail_tmo == -1)
return snprintf(buf, 5, "off\n");
return snprintf(buf, 20, "%d\n", rport->fast_io_fail_tmo);
}
static ssize_t
store_fc_rport_fast_io_fail_tmo(struct device *dev,
struct device_attribute *attr, const char *buf,
size_t count)
{
int val;
char *cp;
struct fc_rport *rport = transport_class_to_rport(dev);
if ((rport->port_state == FC_PORTSTATE_BLOCKED) ||
(rport->port_state == FC_PORTSTATE_DELETED) ||
(rport->port_state == FC_PORTSTATE_NOTPRESENT))
return -EBUSY;
if (strncmp(buf, "off", 3) == 0)
rport->fast_io_fail_tmo = -1;
else {
val = simple_strtoul(buf, &cp, 0);
if ((*cp && (*cp != '\n')) ||
(val < 0) || (val >= rport->dev_loss_tmo))
return -EINVAL;
rport->fast_io_fail_tmo = val;
}
return count;
}
static FC_DEVICE_ATTR(rport, fast_io_fail_tmo, S_IRUGO | S_IWUSR,
show_fc_rport_fast_io_fail_tmo, store_fc_rport_fast_io_fail_tmo);
/*
* FC SCSI Target Attribute Management
*/
/*
* Note: in the target show function we recognize when the remote
* port is in the heirarchy and do not allow the driver to get
* involved in sysfs functions. The driver only gets involved if
* it's the "old" style that doesn't use rports.
*/
#define fc_starget_show_function(field, format_string, sz, cast) \
static ssize_t \
show_fc_starget_##field (struct device *dev, \
struct device_attribute *attr, char *buf) \
{ \
struct scsi_target *starget = transport_class_to_starget(dev); \
struct Scsi_Host *shost = dev_to_shost(starget->dev.parent); \
struct fc_internal *i = to_fc_internal(shost->transportt); \
struct fc_rport *rport = starget_to_rport(starget); \
if (rport) \
fc_starget_##field(starget) = rport->field; \
else if (i->f->get_starget_##field) \
i->f->get_starget_##field(starget); \
return snprintf(buf, sz, format_string, \
cast fc_starget_##field(starget)); \
}
#define fc_starget_rd_attr(field, format_string, sz) \
fc_starget_show_function(field, format_string, sz, ) \
static FC_DEVICE_ATTR(starget, field, S_IRUGO, \
show_fc_starget_##field, NULL)
#define fc_starget_rd_attr_cast(field, format_string, sz, cast) \
fc_starget_show_function(field, format_string, sz, (cast)) \
static FC_DEVICE_ATTR(starget, field, S_IRUGO, \
show_fc_starget_##field, NULL)
#define SETUP_STARGET_ATTRIBUTE_RD(field) \
i->private_starget_attrs[count] = device_attr_starget_##field; \
i->private_starget_attrs[count].attr.mode = S_IRUGO; \
i->private_starget_attrs[count].store = NULL; \
i->starget_attrs[count] = &i->private_starget_attrs[count]; \
if (i->f->show_starget_##field) \
count++
#define SETUP_STARGET_ATTRIBUTE_RW(field) \
i->private_starget_attrs[count] = device_attr_starget_##field; \
if (!i->f->set_starget_##field) { \
i->private_starget_attrs[count].attr.mode = S_IRUGO; \
i->private_starget_attrs[count].store = NULL; \
} \
i->starget_attrs[count] = &i->private_starget_attrs[count]; \
if (i->f->show_starget_##field) \
count++
/* The FC Transport SCSI Target Attributes: */
fc_starget_rd_attr_cast(node_name, "0x%llx\n", 20, unsigned long long);
fc_starget_rd_attr_cast(port_name, "0x%llx\n", 20, unsigned long long);
fc_starget_rd_attr(port_id, "0x%06x\n", 20);
/*
* FC Virtual Port Attribute Management
*/
#define fc_vport_show_function(field, format_string, sz, cast) \
static ssize_t \
show_fc_vport_##field (struct device *dev, \
struct device_attribute *attr, char *buf) \
{ \
struct fc_vport *vport = transport_class_to_vport(dev); \
struct Scsi_Host *shost = vport_to_shost(vport); \
struct fc_internal *i = to_fc_internal(shost->transportt); \
if ((i->f->get_vport_##field) && \
!(vport->flags & (FC_VPORT_DEL | FC_VPORT_CREATING))) \
i->f->get_vport_##field(vport); \
return snprintf(buf, sz, format_string, cast vport->field); \
}
#define fc_vport_store_function(field) \
static ssize_t \
store_fc_vport_##field(struct device *dev, \
struct device_attribute *attr, \
const char *buf, size_t count) \
{ \
int val; \
struct fc_vport *vport = transport_class_to_vport(dev); \
struct Scsi_Host *shost = vport_to_shost(vport); \
struct fc_internal *i = to_fc_internal(shost->transportt); \
char *cp; \
if (vport->flags & (FC_VPORT_DEL | FC_VPORT_CREATING)) \
return -EBUSY; \
val = simple_strtoul(buf, &cp, 0); \
if (*cp && (*cp != '\n')) \
return -EINVAL; \
i->f->set_vport_##field(vport, val); \
return count; \
}
#define fc_vport_store_str_function(field, slen) \
static ssize_t \
store_fc_vport_##field(struct device *dev, \
struct device_attribute *attr, \
const char *buf, size_t count) \
{ \
struct fc_vport *vport = transport_class_to_vport(dev); \
struct Scsi_Host *shost = vport_to_shost(vport); \
struct fc_internal *i = to_fc_internal(shost->transportt); \
unsigned int cnt=count; \
\
/* count may include a LF at end of string */ \
if (buf[cnt-1] == '\n') \
cnt--; \
if (cnt > ((slen) - 1)) \
return -EINVAL; \
memcpy(vport->field, buf, cnt); \
i->f->set_vport_##field(vport); \
return count; \
}
#define fc_vport_rd_attr(field, format_string, sz) \
fc_vport_show_function(field, format_string, sz, ) \
static FC_DEVICE_ATTR(vport, field, S_IRUGO, \
show_fc_vport_##field, NULL)
#define fc_vport_rd_attr_cast(field, format_string, sz, cast) \
fc_vport_show_function(field, format_string, sz, (cast)) \
static FC_DEVICE_ATTR(vport, field, S_IRUGO, \
show_fc_vport_##field, NULL)
#define fc_vport_rw_attr(field, format_string, sz) \
fc_vport_show_function(field, format_string, sz, ) \
fc_vport_store_function(field) \
static FC_DEVICE_ATTR(vport, field, S_IRUGO | S_IWUSR, \
show_fc_vport_##field, \
store_fc_vport_##field)
#define fc_private_vport_show_function(field, format_string, sz, cast) \
static ssize_t \
show_fc_vport_##field (struct device *dev, \
struct device_attribute *attr, char *buf) \
{ \
struct fc_vport *vport = transport_class_to_vport(dev); \
return snprintf(buf, sz, format_string, cast vport->field); \
}
#define fc_private_vport_store_u32_function(field) \
static ssize_t \
store_fc_vport_##field(struct device *dev, \
struct device_attribute *attr, \
const char *buf, size_t count) \
{ \
u32 val; \
struct fc_vport *vport = transport_class_to_vport(dev); \
char *cp; \
if (vport->flags & (FC_VPORT_DEL | FC_VPORT_CREATING)) \
return -EBUSY; \
val = simple_strtoul(buf, &cp, 0); \
if (*cp && (*cp != '\n')) \
return -EINVAL; \
vport->field = val; \
return count; \
}
#define fc_private_vport_rd_attr(field, format_string, sz) \
fc_private_vport_show_function(field, format_string, sz, ) \
static FC_DEVICE_ATTR(vport, field, S_IRUGO, \
show_fc_vport_##field, NULL)
#define fc_private_vport_rd_attr_cast(field, format_string, sz, cast) \
fc_private_vport_show_function(field, format_string, sz, (cast)) \
static FC_DEVICE_ATTR(vport, field, S_IRUGO, \
show_fc_vport_##field, NULL)
#define fc_private_vport_rw_u32_attr(field, format_string, sz) \
fc_private_vport_show_function(field, format_string, sz, ) \
fc_private_vport_store_u32_function(field) \
static FC_DEVICE_ATTR(vport, field, S_IRUGO | S_IWUSR, \
show_fc_vport_##field, \
store_fc_vport_##field)
#define fc_private_vport_rd_enum_attr(title, maxlen) \
static ssize_t \
show_fc_vport_##title (struct device *dev, \
struct device_attribute *attr, \
char *buf) \
{ \
struct fc_vport *vport = transport_class_to_vport(dev); \
const char *name; \
name = get_fc_##title##_name(vport->title); \
if (!name) \
return -EINVAL; \
return snprintf(buf, maxlen, "%s\n", name); \
} \
static FC_DEVICE_ATTR(vport, title, S_IRUGO, \
show_fc_vport_##title, NULL)
#define SETUP_VPORT_ATTRIBUTE_RD(field) \
i->private_vport_attrs[count] = device_attr_vport_##field; \
i->private_vport_attrs[count].attr.mode = S_IRUGO; \
i->private_vport_attrs[count].store = NULL; \
i->vport_attrs[count] = &i->private_vport_attrs[count]; \
if (i->f->get_##field) \
count++
/* NOTE: Above MACRO differs: checks function not show bit */
#define SETUP_PRIVATE_VPORT_ATTRIBUTE_RD(field) \
i->private_vport_attrs[count] = device_attr_vport_##field; \
i->private_vport_attrs[count].attr.mode = S_IRUGO; \
i->private_vport_attrs[count].store = NULL; \
i->vport_attrs[count] = &i->private_vport_attrs[count]; \
count++
#define SETUP_VPORT_ATTRIBUTE_WR(field) \
i->private_vport_attrs[count] = device_attr_vport_##field; \
i->vport_attrs[count] = &i->private_vport_attrs[count]; \
if (i->f->field) \
count++
/* NOTE: Above MACRO differs: checks function */
#define SETUP_VPORT_ATTRIBUTE_RW(field) \
i->private_vport_attrs[count] = device_attr_vport_##field; \
if (!i->f->set_vport_##field) { \
i->private_vport_attrs[count].attr.mode = S_IRUGO; \
i->private_vport_attrs[count].store = NULL; \
} \
i->vport_attrs[count] = &i->private_vport_attrs[count]; \
count++
/* NOTE: Above MACRO differs: does not check show bit */
#define SETUP_PRIVATE_VPORT_ATTRIBUTE_RW(field) \
{ \
i->private_vport_attrs[count] = device_attr_vport_##field; \
i->vport_attrs[count] = &i->private_vport_attrs[count]; \
count++; \
}
/* The FC Transport Virtual Port Attributes: */
/* Fixed Virtual Port Attributes */
/* Dynamic Virtual Port Attributes */
/* Private Virtual Port Attributes */
fc_private_vport_rd_enum_attr(vport_state, FC_VPORTSTATE_MAX_NAMELEN);
fc_private_vport_rd_enum_attr(vport_last_state, FC_VPORTSTATE_MAX_NAMELEN);
fc_private_vport_rd_attr_cast(node_name, "0x%llx\n", 20, unsigned long long);
fc_private_vport_rd_attr_cast(port_name, "0x%llx\n", 20, unsigned long long);
static ssize_t
show_fc_vport_roles (struct device *dev, struct device_attribute *attr,
char *buf)
{
struct fc_vport *vport = transport_class_to_vport(dev);
if (vport->roles == FC_PORT_ROLE_UNKNOWN)
return snprintf(buf, 20, "unknown\n");
return get_fc_port_roles_names(vport->roles, buf);
}
static FC_DEVICE_ATTR(vport, roles, S_IRUGO, show_fc_vport_roles, NULL);
fc_private_vport_rd_enum_attr(vport_type, FC_PORTTYPE_MAX_NAMELEN);
fc_private_vport_show_function(symbolic_name, "%s\n",
FC_VPORT_SYMBOLIC_NAMELEN + 1, )
fc_vport_store_str_function(symbolic_name, FC_VPORT_SYMBOLIC_NAMELEN)
static FC_DEVICE_ATTR(vport, symbolic_name, S_IRUGO | S_IWUSR,
show_fc_vport_symbolic_name, store_fc_vport_symbolic_name);
static ssize_t
store_fc_vport_delete(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct fc_vport *vport = transport_class_to_vport(dev);
struct Scsi_Host *shost = vport_to_shost(vport);
fc_queue_work(shost, &vport->vport_delete_work);
return count;
}
static FC_DEVICE_ATTR(vport, vport_delete, S_IWUSR,
NULL, store_fc_vport_delete);
/*
* Enable/Disable vport
* Write "1" to disable, write "0" to enable
*/
static ssize_t
store_fc_vport_disable(struct device *dev, struct device_attribute *attr,
const char *buf,
size_t count)
{
struct fc_vport *vport = transport_class_to_vport(dev);
struct Scsi_Host *shost = vport_to_shost(vport);
struct fc_internal *i = to_fc_internal(shost->transportt);
int stat;
if (vport->flags & (FC_VPORT_DEL | FC_VPORT_CREATING))
return -EBUSY;
if (*buf == '0') {
if (vport->vport_state != FC_VPORT_DISABLED)
return -EALREADY;
} else if (*buf == '1') {
if (vport->vport_state == FC_VPORT_DISABLED)
return -EALREADY;
} else
return -EINVAL;
stat = i->f->vport_disable(vport, ((*buf == '0') ? false : true));
return stat ? stat : count;
}
static FC_DEVICE_ATTR(vport, vport_disable, S_IWUSR,
NULL, store_fc_vport_disable);
/*
* Host Attribute Management
*/
#define fc_host_show_function(field, format_string, sz, cast) \
static ssize_t \
show_fc_host_##field (struct device *dev, \
struct device_attribute *attr, char *buf) \
{ \
struct Scsi_Host *shost = transport_class_to_shost(dev); \
struct fc_internal *i = to_fc_internal(shost->transportt); \
if (i->f->get_host_##field) \
i->f->get_host_##field(shost); \
return snprintf(buf, sz, format_string, cast fc_host_##field(shost)); \
}
#define fc_host_store_function(field) \
static ssize_t \
store_fc_host_##field(struct device *dev, \
struct device_attribute *attr, \
const char *buf, size_t count) \
{ \
int val; \
struct Scsi_Host *shost = transport_class_to_shost(dev); \
struct fc_internal *i = to_fc_internal(shost->transportt); \
char *cp; \
\
val = simple_strtoul(buf, &cp, 0); \
if (*cp && (*cp != '\n')) \
return -EINVAL; \
i->f->set_host_##field(shost, val); \
return count; \
}
#define fc_host_store_str_function(field, slen) \
static ssize_t \
store_fc_host_##field(struct device *dev, \
struct device_attribute *attr, \
const char *buf, size_t count) \
{ \
struct Scsi_Host *shost = transport_class_to_shost(dev); \
struct fc_internal *i = to_fc_internal(shost->transportt); \
unsigned int cnt=count; \
\
/* count may include a LF at end of string */ \
if (buf[cnt-1] == '\n') \
cnt--; \
if (cnt > ((slen) - 1)) \
return -EINVAL; \
memcpy(fc_host_##field(shost), buf, cnt); \
i->f->set_host_##field(shost); \
return count; \
}
#define fc_host_rd_attr(field, format_string, sz) \
fc_host_show_function(field, format_string, sz, ) \
static FC_DEVICE_ATTR(host, field, S_IRUGO, \
show_fc_host_##field, NULL)
#define fc_host_rd_attr_cast(field, format_string, sz, cast) \
fc_host_show_function(field, format_string, sz, (cast)) \
static FC_DEVICE_ATTR(host, field, S_IRUGO, \
show_fc_host_##field, NULL)
#define fc_host_rw_attr(field, format_string, sz) \
fc_host_show_function(field, format_string, sz, ) \
fc_host_store_function(field) \
static FC_DEVICE_ATTR(host, field, S_IRUGO | S_IWUSR, \
show_fc_host_##field, \
store_fc_host_##field)
#define fc_host_rd_enum_attr(title, maxlen) \
static ssize_t \
show_fc_host_##title (struct device *dev, \
struct device_attribute *attr, char *buf) \
{ \
struct Scsi_Host *shost = transport_class_to_shost(dev); \
struct fc_internal *i = to_fc_internal(shost->transportt); \
const char *name; \
if (i->f->get_host_##title) \
i->f->get_host_##title(shost); \
name = get_fc_##title##_name(fc_host_##title(shost)); \
if (!name) \
return -EINVAL; \
return snprintf(buf, maxlen, "%s\n", name); \
} \
static FC_DEVICE_ATTR(host, title, S_IRUGO, show_fc_host_##title, NULL)
#define SETUP_HOST_ATTRIBUTE_RD(field) \
i->private_host_attrs[count] = device_attr_host_##field; \
i->private_host_attrs[count].attr.mode = S_IRUGO; \
i->private_host_attrs[count].store = NULL; \
i->host_attrs[count] = &i->private_host_attrs[count]; \
if (i->f->show_host_##field) \
count++
#define SETUP_HOST_ATTRIBUTE_RD_NS(field) \
i->private_host_attrs[count] = device_attr_host_##field; \
i->private_host_attrs[count].attr.mode = S_IRUGO; \
i->private_host_attrs[count].store = NULL; \
i->host_attrs[count] = &i->private_host_attrs[count]; \
count++
#define SETUP_HOST_ATTRIBUTE_RW(field) \
i->private_host_attrs[count] = device_attr_host_##field; \
if (!i->f->set_host_##field) { \
i->private_host_attrs[count].attr.mode = S_IRUGO; \
i->private_host_attrs[count].store = NULL; \
} \
i->host_attrs[count] = &i->private_host_attrs[count]; \
if (i->f->show_host_##field) \
count++
#define fc_private_host_show_function(field, format_string, sz, cast) \
static ssize_t \
show_fc_host_##field (struct device *dev, \
struct device_attribute *attr, char *buf) \
{ \
struct Scsi_Host *shost = transport_class_to_shost(dev); \
return snprintf(buf, sz, format_string, cast fc_host_##field(shost)); \
}
#define fc_private_host_rd_attr(field, format_string, sz) \
fc_private_host_show_function(field, format_string, sz, ) \
static FC_DEVICE_ATTR(host, field, S_IRUGO, \
show_fc_host_##field, NULL)
#define fc_private_host_rd_attr_cast(field, format_string, sz, cast) \
fc_private_host_show_function(field, format_string, sz, (cast)) \
static FC_DEVICE_ATTR(host, field, S_IRUGO, \
show_fc_host_##field, NULL)
#define SETUP_PRIVATE_HOST_ATTRIBUTE_RD(field) \
i->private_host_attrs[count] = device_attr_host_##field; \
i->private_host_attrs[count].attr.mode = S_IRUGO; \
i->private_host_attrs[count].store = NULL; \
i->host_attrs[count] = &i->private_host_attrs[count]; \
count++
#define SETUP_PRIVATE_HOST_ATTRIBUTE_RW(field) \
{ \
i->private_host_attrs[count] = device_attr_host_##field; \
i->host_attrs[count] = &i->private_host_attrs[count]; \
count++; \
}
/* Fixed Host Attributes */
static ssize_t
show_fc_host_supported_classes (struct device *dev,
struct device_attribute *attr, char *buf)
{
struct Scsi_Host *shost = transport_class_to_shost(dev);
if (fc_host_supported_classes(shost) == FC_COS_UNSPECIFIED)
return snprintf(buf, 20, "unspecified\n");
return get_fc_cos_names(fc_host_supported_classes(shost), buf);
}
static FC_DEVICE_ATTR(host, supported_classes, S_IRUGO,
show_fc_host_supported_classes, NULL);
static ssize_t
show_fc_host_supported_fc4s (struct device *dev,
struct device_attribute *attr, char *buf)
{
struct Scsi_Host *shost = transport_class_to_shost(dev);
return (ssize_t)show_fc_fc4s(buf, fc_host_supported_fc4s(shost));
}
static FC_DEVICE_ATTR(host, supported_fc4s, S_IRUGO,
show_fc_host_supported_fc4s, NULL);
static ssize_t
show_fc_host_supported_speeds (struct device *dev,
struct device_attribute *attr, char *buf)
{
struct Scsi_Host *shost = transport_class_to_shost(dev);
if (fc_host_supported_speeds(shost) == FC_PORTSPEED_UNKNOWN)
return snprintf(buf, 20, "unknown\n");
return get_fc_port_speed_names(fc_host_supported_speeds(shost), buf);
}
static FC_DEVICE_ATTR(host, supported_speeds, S_IRUGO,
show_fc_host_supported_speeds, NULL);
fc_private_host_rd_attr_cast(node_name, "0x%llx\n", 20, unsigned long long);
fc_private_host_rd_attr_cast(port_name, "0x%llx\n", 20, unsigned long long);
fc_private_host_rd_attr_cast(permanent_port_name, "0x%llx\n", 20,
unsigned long long);
fc_private_host_rd_attr(maxframe_size, "%u bytes\n", 20);
fc_private_host_rd_attr(max_npiv_vports, "%u\n", 20);
fc_private_host_rd_attr(serial_number, "%s\n", (FC_SERIAL_NUMBER_SIZE +1));
/* Dynamic Host Attributes */
static ssize_t
show_fc_host_active_fc4s (struct device *dev,
struct device_attribute *attr, char *buf)
{
struct Scsi_Host *shost = transport_class_to_shost(dev);
struct fc_internal *i = to_fc_internal(shost->transportt);
if (i->f->get_host_active_fc4s)
i->f->get_host_active_fc4s(shost);
return (ssize_t)show_fc_fc4s(buf, fc_host_active_fc4s(shost));
}
static FC_DEVICE_ATTR(host, active_fc4s, S_IRUGO,
show_fc_host_active_fc4s, NULL);
static ssize_t
show_fc_host_speed (struct device *dev,
struct device_attribute *attr, char *buf)
{
struct Scsi_Host *shost = transport_class_to_shost(dev);
struct fc_internal *i = to_fc_internal(shost->transportt);
if (i->f->get_host_speed)
i->f->get_host_speed(shost);
if (fc_host_speed(shost) == FC_PORTSPEED_UNKNOWN)
return snprintf(buf, 20, "unknown\n");
return get_fc_port_speed_names(fc_host_speed(shost), buf);
}
static FC_DEVICE_ATTR(host, speed, S_IRUGO,
show_fc_host_speed, NULL);
fc_host_rd_attr(port_id, "0x%06x\n", 20);
fc_host_rd_enum_attr(port_type, FC_PORTTYPE_MAX_NAMELEN);
fc_host_rd_enum_attr(port_state, FC_PORTSTATE_MAX_NAMELEN);
fc_host_rd_attr_cast(fabric_name, "0x%llx\n", 20, unsigned long long);
fc_host_rd_attr(symbolic_name, "%s\n", FC_SYMBOLIC_NAME_SIZE + 1);
fc_private_host_show_function(system_hostname, "%s\n",
FC_SYMBOLIC_NAME_SIZE + 1, )
fc_host_store_str_function(system_hostname, FC_SYMBOLIC_NAME_SIZE)
static FC_DEVICE_ATTR(host, system_hostname, S_IRUGO | S_IWUSR,
show_fc_host_system_hostname, store_fc_host_system_hostname);
/* Private Host Attributes */
static ssize_t
show_fc_private_host_tgtid_bind_type(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct Scsi_Host *shost = transport_class_to_shost(dev);
const char *name;
name = get_fc_tgtid_bind_type_name(fc_host_tgtid_bind_type(shost));
if (!name)
return -EINVAL;
return snprintf(buf, FC_BINDTYPE_MAX_NAMELEN, "%s\n", name);
}
#define get_list_head_entry(pos, head, member) \
pos = list_entry((head)->next, typeof(*pos), member)
static ssize_t
store_fc_private_host_tgtid_bind_type(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct Scsi_Host *shost = transport_class_to_shost(dev);
struct fc_rport *rport;
enum fc_tgtid_binding_type val;
unsigned long flags;
if (get_fc_tgtid_bind_type_match(buf, &val))
return -EINVAL;
/* if changing bind type, purge all unused consistent bindings */
if (val != fc_host_tgtid_bind_type(shost)) {
spin_lock_irqsave(shost->host_lock, flags);
while (!list_empty(&fc_host_rport_bindings(shost))) {
get_list_head_entry(rport,
&fc_host_rport_bindings(shost), peers);
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
list_del(&rport->peers);
rport->port_state = FC_PORTSTATE_DELETED;
fc_queue_work(shost, &rport->rport_delete_work);
}
spin_unlock_irqrestore(shost->host_lock, flags);
}
fc_host_tgtid_bind_type(shost) = val;
return count;
}
static FC_DEVICE_ATTR(host, tgtid_bind_type, S_IRUGO | S_IWUSR,
show_fc_private_host_tgtid_bind_type,
store_fc_private_host_tgtid_bind_type);
static ssize_t
store_fc_private_host_issue_lip(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct Scsi_Host *shost = transport_class_to_shost(dev);
struct fc_internal *i = to_fc_internal(shost->transportt);
int ret;
/* ignore any data value written to the attribute */
if (i->f->issue_fc_host_lip) {
ret = i->f->issue_fc_host_lip(shost);
return ret ? ret: count;
}
return -ENOENT;
}
static FC_DEVICE_ATTR(host, issue_lip, S_IWUSR, NULL,
store_fc_private_host_issue_lip);
fc_private_host_rd_attr(npiv_vports_inuse, "%u\n", 20);
/*
* Host Statistics Management
*/
/* Show a given an attribute in the statistics group */
static ssize_t
fc_stat_show(const struct device *dev, char *buf, unsigned long offset)
{
struct Scsi_Host *shost = transport_class_to_shost(dev);
struct fc_internal *i = to_fc_internal(shost->transportt);
struct fc_host_statistics *stats;
ssize_t ret = -ENOENT;
if (offset > sizeof(struct fc_host_statistics) ||
offset % sizeof(u64) != 0)
WARN_ON(1);
if (i->f->get_fc_host_stats) {
stats = (i->f->get_fc_host_stats)(shost);
if (stats)
ret = snprintf(buf, 20, "0x%llx\n",
(unsigned long long)*(u64 *)(((u8 *) stats) + offset));
}
return ret;
}
/* generate a read-only statistics attribute */
#define fc_host_statistic(name) \
static ssize_t show_fcstat_##name(struct device *cd, \
struct device_attribute *attr, \
char *buf) \
{ \
return fc_stat_show(cd, buf, \
offsetof(struct fc_host_statistics, name)); \
} \
static FC_DEVICE_ATTR(host, name, S_IRUGO, show_fcstat_##name, NULL)
fc_host_statistic(seconds_since_last_reset);
fc_host_statistic(tx_frames);
fc_host_statistic(tx_words);
fc_host_statistic(rx_frames);
fc_host_statistic(rx_words);
fc_host_statistic(lip_count);
fc_host_statistic(nos_count);
fc_host_statistic(error_frames);
fc_host_statistic(dumped_frames);
fc_host_statistic(link_failure_count);
fc_host_statistic(loss_of_sync_count);
fc_host_statistic(loss_of_signal_count);
fc_host_statistic(prim_seq_protocol_err_count);
fc_host_statistic(invalid_tx_word_count);
fc_host_statistic(invalid_crc_count);
fc_host_statistic(fcp_input_requests);
fc_host_statistic(fcp_output_requests);
fc_host_statistic(fcp_control_requests);
fc_host_statistic(fcp_input_megabytes);
fc_host_statistic(fcp_output_megabytes);
static ssize_t
fc_reset_statistics(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct Scsi_Host *shost = transport_class_to_shost(dev);
struct fc_internal *i = to_fc_internal(shost->transportt);
/* ignore any data value written to the attribute */
if (i->f->reset_fc_host_stats) {
i->f->reset_fc_host_stats(shost);
return count;
}
return -ENOENT;
}
static FC_DEVICE_ATTR(host, reset_statistics, S_IWUSR, NULL,
fc_reset_statistics);
static struct attribute *fc_statistics_attrs[] = {
&device_attr_host_seconds_since_last_reset.attr,
&device_attr_host_tx_frames.attr,
&device_attr_host_tx_words.attr,
&device_attr_host_rx_frames.attr,
&device_attr_host_rx_words.attr,
&device_attr_host_lip_count.attr,
&device_attr_host_nos_count.attr,
&device_attr_host_error_frames.attr,
&device_attr_host_dumped_frames.attr,
&device_attr_host_link_failure_count.attr,
&device_attr_host_loss_of_sync_count.attr,
&device_attr_host_loss_of_signal_count.attr,
&device_attr_host_prim_seq_protocol_err_count.attr,
&device_attr_host_invalid_tx_word_count.attr,
&device_attr_host_invalid_crc_count.attr,
&device_attr_host_fcp_input_requests.attr,
&device_attr_host_fcp_output_requests.attr,
&device_attr_host_fcp_control_requests.attr,
&device_attr_host_fcp_input_megabytes.attr,
&device_attr_host_fcp_output_megabytes.attr,
&device_attr_host_reset_statistics.attr,
NULL
};
static struct attribute_group fc_statistics_group = {
.name = "statistics",
.attrs = fc_statistics_attrs,
};
/* Host Vport Attributes */
static int
fc_parse_wwn(const char *ns, u64 *nm)
{
unsigned int i, j;
u8 wwn[8];
memset(wwn, 0, sizeof(wwn));
/* Validate and store the new name */
for (i=0, j=0; i < 16; i++) {
if ((*ns >= 'a') && (*ns <= 'f'))
j = ((j << 4) | ((*ns++ -'a') + 10));
else if ((*ns >= 'A') && (*ns <= 'F'))
j = ((j << 4) | ((*ns++ -'A') + 10));
else if ((*ns >= '0') && (*ns <= '9'))
j = ((j << 4) | (*ns++ -'0'));
else
return -EINVAL;
if (i % 2) {
wwn[i/2] = j & 0xff;
j = 0;
}
}
*nm = wwn_to_u64(wwn);
return 0;
}
/*
* "Short-cut" sysfs variable to create a new vport on a FC Host.
* Input is a string of the form "<WWPN>:<WWNN>". Other attributes
* will default to a NPIV-based FCP_Initiator; The WWNs are specified
* as hex characters, and may *not* contain any prefixes (e.g. 0x, x, etc)
*/
static ssize_t
store_fc_host_vport_create(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct Scsi_Host *shost = transport_class_to_shost(dev);
struct fc_vport_identifiers vid;
struct fc_vport *vport;
unsigned int cnt=count;
int stat;
memset(&vid, 0, sizeof(vid));
/* count may include a LF at end of string */
if (buf[cnt-1] == '\n')
cnt--;
/* validate we have enough characters for WWPN */
if ((cnt != (16+1+16)) || (buf[16] != ':'))
return -EINVAL;
stat = fc_parse_wwn(&buf[0], &vid.port_name);
if (stat)
return stat;
stat = fc_parse_wwn(&buf[17], &vid.node_name);
if (stat)
return stat;
vid.roles = FC_PORT_ROLE_FCP_INITIATOR;
vid.vport_type = FC_PORTTYPE_NPIV;
/* vid.symbolic_name is already zero/NULL's */
vid.disable = false; /* always enabled */
/* we only allow support on Channel 0 !!! */
stat = fc_vport_setup(shost, 0, &shost->shost_gendev, &vid, &vport);
return stat ? stat : count;
}
static FC_DEVICE_ATTR(host, vport_create, S_IWUSR, NULL,
store_fc_host_vport_create);
/*
* "Short-cut" sysfs variable to delete a vport on a FC Host.
* Vport is identified by a string containing "<WWPN>:<WWNN>".
* The WWNs are specified as hex characters, and may *not* contain
* any prefixes (e.g. 0x, x, etc)
*/
static ssize_t
store_fc_host_vport_delete(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct Scsi_Host *shost = transport_class_to_shost(dev);
struct fc_host_attrs *fc_host = shost_to_fc_host(shost);
struct fc_vport *vport;
u64 wwpn, wwnn;
unsigned long flags;
unsigned int cnt=count;
int stat, match;
/* count may include a LF at end of string */
if (buf[cnt-1] == '\n')
cnt--;
/* validate we have enough characters for WWPN */
if ((cnt != (16+1+16)) || (buf[16] != ':'))
return -EINVAL;
stat = fc_parse_wwn(&buf[0], &wwpn);
if (stat)
return stat;
stat = fc_parse_wwn(&buf[17], &wwnn);
if (stat)
return stat;
spin_lock_irqsave(shost->host_lock, flags);
match = 0;
/* we only allow support on Channel 0 !!! */
list_for_each_entry(vport, &fc_host->vports, peers) {
if ((vport->channel == 0) &&
(vport->port_name == wwpn) && (vport->node_name == wwnn)) {
match = 1;
break;
}
}
spin_unlock_irqrestore(shost->host_lock, flags);
if (!match)
return -ENODEV;
stat = fc_vport_terminate(vport);
return stat ? stat : count;
}
static FC_DEVICE_ATTR(host, vport_delete, S_IWUSR, NULL,
store_fc_host_vport_delete);
static int fc_host_match(struct attribute_container *cont,
struct device *dev)
{
struct Scsi_Host *shost;
struct fc_internal *i;
if (!scsi_is_host_device(dev))
return 0;
shost = dev_to_shost(dev);
if (!shost->transportt || shost->transportt->host_attrs.ac.class
!= &fc_host_class.class)
return 0;
i = to_fc_internal(shost->transportt);
return &i->t.host_attrs.ac == cont;
}
static int fc_target_match(struct attribute_container *cont,
struct device *dev)
{
struct Scsi_Host *shost;
struct fc_internal *i;
if (!scsi_is_target_device(dev))
return 0;
shost = dev_to_shost(dev->parent);
if (!shost->transportt || shost->transportt->host_attrs.ac.class
!= &fc_host_class.class)
return 0;
i = to_fc_internal(shost->transportt);
return &i->t.target_attrs.ac == cont;
}
static void fc_rport_dev_release(struct device *dev)
{
struct fc_rport *rport = dev_to_rport(dev);
put_device(dev->parent);
kfree(rport);
}
int scsi_is_fc_rport(const struct device *dev)
{
return dev->release == fc_rport_dev_release;
}
EXPORT_SYMBOL(scsi_is_fc_rport);
static int fc_rport_match(struct attribute_container *cont,
struct device *dev)
{
struct Scsi_Host *shost;
struct fc_internal *i;
if (!scsi_is_fc_rport(dev))
return 0;
shost = dev_to_shost(dev->parent);
if (!shost->transportt || shost->transportt->host_attrs.ac.class
!= &fc_host_class.class)
return 0;
i = to_fc_internal(shost->transportt);
return &i->rport_attr_cont.ac == cont;
}
static void fc_vport_dev_release(struct device *dev)
{
struct fc_vport *vport = dev_to_vport(dev);
put_device(dev->parent); /* release kobj parent */
kfree(vport);
}
int scsi_is_fc_vport(const struct device *dev)
{
return dev->release == fc_vport_dev_release;
}
EXPORT_SYMBOL(scsi_is_fc_vport);
static int fc_vport_match(struct attribute_container *cont,
struct device *dev)
{
struct fc_vport *vport;
struct Scsi_Host *shost;
struct fc_internal *i;
if (!scsi_is_fc_vport(dev))
return 0;
vport = dev_to_vport(dev);
shost = vport_to_shost(vport);
if (!shost->transportt || shost->transportt->host_attrs.ac.class
!= &fc_host_class.class)
return 0;
i = to_fc_internal(shost->transportt);
return &i->vport_attr_cont.ac == cont;
}
/**
* fc_timed_out - FC Transport I/O timeout intercept handler
* @scmd: The SCSI command which timed out
*
* This routine protects against error handlers getting invoked while a
* rport is in a blocked state, typically due to a temporarily loss of
* connectivity. If the error handlers are allowed to proceed, requests
* to abort i/o, reset the target, etc will likely fail as there is no way
* to communicate with the device to perform the requested function. These
* failures may result in the midlayer taking the device offline, requiring
* manual intervention to restore operation.
*
* This routine, called whenever an i/o times out, validates the state of
* the underlying rport. If the rport is blocked, it returns
* EH_RESET_TIMER, which will continue to reschedule the timeout.
* Eventually, either the device will return, or devloss_tmo will fire,
* and when the timeout then fires, it will be handled normally.
* If the rport is not blocked, normal error handling continues.
*
* Notes:
* This routine assumes no locks are held on entry.
*/
static enum blk_eh_timer_return
fc_timed_out(struct scsi_cmnd *scmd)
{
struct fc_rport *rport = starget_to_rport(scsi_target(scmd->device));
if (rport->port_state == FC_PORTSTATE_BLOCKED)
return BLK_EH_RESET_TIMER;
return BLK_EH_NOT_HANDLED;
}
/*
* Called by fc_user_scan to locate an rport on the shost that
* matches the channel and target id, and invoke scsi_scan_target()
* on the rport.
*/
static void
fc_user_scan_tgt(struct Scsi_Host *shost, uint channel, uint id, uint lun)
{
struct fc_rport *rport;
unsigned long flags;
spin_lock_irqsave(shost->host_lock, flags);
list_for_each_entry(rport, &fc_host_rports(shost), peers) {
if (rport->scsi_target_id == -1)
continue;
if (rport->port_state != FC_PORTSTATE_ONLINE)
continue;
if ((channel == rport->channel) &&
(id == rport->scsi_target_id)) {
spin_unlock_irqrestore(shost->host_lock, flags);
scsi_scan_target(&rport->dev, channel, id, lun, 1);
return;
}
}
spin_unlock_irqrestore(shost->host_lock, flags);
}
/*
* Called via sysfs scan routines. Necessary, as the FC transport
* wants to place all target objects below the rport object. So this
* routine must invoke the scsi_scan_target() routine with the rport
* object as the parent.
*/
static int
fc_user_scan(struct Scsi_Host *shost, uint channel, uint id, uint lun)
{
uint chlo, chhi;
uint tgtlo, tgthi;
if (((channel != SCAN_WILD_CARD) && (channel > shost->max_channel)) ||
((id != SCAN_WILD_CARD) && (id >= shost->max_id)) ||
((lun != SCAN_WILD_CARD) && (lun > shost->max_lun)))
return -EINVAL;
if (channel == SCAN_WILD_CARD) {
chlo = 0;
chhi = shost->max_channel + 1;
} else {
chlo = channel;
chhi = channel + 1;
}
if (id == SCAN_WILD_CARD) {
tgtlo = 0;
tgthi = shost->max_id;
} else {
tgtlo = id;
tgthi = id + 1;
}
for ( ; chlo < chhi; chlo++)
for ( ; tgtlo < tgthi; tgtlo++)
fc_user_scan_tgt(shost, chlo, tgtlo, lun);
return 0;
}
static int fc_tsk_mgmt_response(struct Scsi_Host *shost, u64 nexus, u64 tm_id,
int result)
{
struct fc_internal *i = to_fc_internal(shost->transportt);
return i->f->tsk_mgmt_response(shost, nexus, tm_id, result);
}
static int fc_it_nexus_response(struct Scsi_Host *shost, u64 nexus, int result)
{
struct fc_internal *i = to_fc_internal(shost->transportt);
return i->f->it_nexus_response(shost, nexus, result);
}
struct scsi_transport_template *
fc_attach_transport(struct fc_function_template *ft)
{
int count;
struct fc_internal *i = kzalloc(sizeof(struct fc_internal),
GFP_KERNEL);
if (unlikely(!i))
return NULL;
i->t.target_attrs.ac.attrs = &i->starget_attrs[0];
i->t.target_attrs.ac.class = &fc_transport_class.class;
i->t.target_attrs.ac.match = fc_target_match;
i->t.target_size = sizeof(struct fc_starget_attrs);
transport_container_register(&i->t.target_attrs);
i->t.host_attrs.ac.attrs = &i->host_attrs[0];
i->t.host_attrs.ac.class = &fc_host_class.class;
i->t.host_attrs.ac.match = fc_host_match;
i->t.host_size = sizeof(struct fc_host_attrs);
if (ft->get_fc_host_stats)
i->t.host_attrs.statistics = &fc_statistics_group;
transport_container_register(&i->t.host_attrs);
i->rport_attr_cont.ac.attrs = &i->rport_attrs[0];
i->rport_attr_cont.ac.class = &fc_rport_class.class;
i->rport_attr_cont.ac.match = fc_rport_match;
transport_container_register(&i->rport_attr_cont);
i->vport_attr_cont.ac.attrs = &i->vport_attrs[0];
i->vport_attr_cont.ac.class = &fc_vport_class.class;
i->vport_attr_cont.ac.match = fc_vport_match;
transport_container_register(&i->vport_attr_cont);
i->f = ft;
/* Transport uses the shost workq for scsi scanning */
i->t.create_work_queue = 1;
i->t.eh_timed_out = fc_timed_out;
i->t.user_scan = fc_user_scan;
/* target-mode drivers' functions */
i->t.tsk_mgmt_response = fc_tsk_mgmt_response;
i->t.it_nexus_response = fc_it_nexus_response;
/*
* Setup SCSI Target Attributes.
*/
count = 0;
SETUP_STARGET_ATTRIBUTE_RD(node_name);
SETUP_STARGET_ATTRIBUTE_RD(port_name);
SETUP_STARGET_ATTRIBUTE_RD(port_id);
BUG_ON(count > FC_STARGET_NUM_ATTRS);
i->starget_attrs[count] = NULL;
/*
* Setup SCSI Host Attributes.
*/
count=0;
SETUP_HOST_ATTRIBUTE_RD(node_name);
SETUP_HOST_ATTRIBUTE_RD(port_name);
SETUP_HOST_ATTRIBUTE_RD(permanent_port_name);
SETUP_HOST_ATTRIBUTE_RD(supported_classes);
SETUP_HOST_ATTRIBUTE_RD(supported_fc4s);
SETUP_HOST_ATTRIBUTE_RD(supported_speeds);
SETUP_HOST_ATTRIBUTE_RD(maxframe_size);
if (ft->vport_create) {
SETUP_HOST_ATTRIBUTE_RD_NS(max_npiv_vports);
SETUP_HOST_ATTRIBUTE_RD_NS(npiv_vports_inuse);
}
SETUP_HOST_ATTRIBUTE_RD(serial_number);
SETUP_HOST_ATTRIBUTE_RD(port_id);
SETUP_HOST_ATTRIBUTE_RD(port_type);
SETUP_HOST_ATTRIBUTE_RD(port_state);
SETUP_HOST_ATTRIBUTE_RD(active_fc4s);
SETUP_HOST_ATTRIBUTE_RD(speed);
SETUP_HOST_ATTRIBUTE_RD(fabric_name);
SETUP_HOST_ATTRIBUTE_RD(symbolic_name);
SETUP_HOST_ATTRIBUTE_RW(system_hostname);
/* Transport-managed attributes */
SETUP_PRIVATE_HOST_ATTRIBUTE_RW(tgtid_bind_type);
if (ft->issue_fc_host_lip)
SETUP_PRIVATE_HOST_ATTRIBUTE_RW(issue_lip);
if (ft->vport_create)
SETUP_PRIVATE_HOST_ATTRIBUTE_RW(vport_create);
if (ft->vport_delete)
SETUP_PRIVATE_HOST_ATTRIBUTE_RW(vport_delete);
BUG_ON(count > FC_HOST_NUM_ATTRS);
i->host_attrs[count] = NULL;
/*
* Setup Remote Port Attributes.
*/
count=0;
SETUP_RPORT_ATTRIBUTE_RD(maxframe_size);
SETUP_RPORT_ATTRIBUTE_RD(supported_classes);
SETUP_RPORT_ATTRIBUTE_RW(dev_loss_tmo);
SETUP_PRIVATE_RPORT_ATTRIBUTE_RD(node_name);
SETUP_PRIVATE_RPORT_ATTRIBUTE_RD(port_name);
SETUP_PRIVATE_RPORT_ATTRIBUTE_RD(port_id);
SETUP_PRIVATE_RPORT_ATTRIBUTE_RD(roles);
SETUP_PRIVATE_RPORT_ATTRIBUTE_RD(port_state);
SETUP_PRIVATE_RPORT_ATTRIBUTE_RD(scsi_target_id);
if (ft->terminate_rport_io)
SETUP_PRIVATE_RPORT_ATTRIBUTE_RW(fast_io_fail_tmo);
BUG_ON(count > FC_RPORT_NUM_ATTRS);
i->rport_attrs[count] = NULL;
/*
* Setup Virtual Port Attributes.
*/
count=0;
SETUP_PRIVATE_VPORT_ATTRIBUTE_RD(vport_state);
SETUP_PRIVATE_VPORT_ATTRIBUTE_RD(vport_last_state);
SETUP_PRIVATE_VPORT_ATTRIBUTE_RD(node_name);
SETUP_PRIVATE_VPORT_ATTRIBUTE_RD(port_name);
SETUP_PRIVATE_VPORT_ATTRIBUTE_RD(roles);
SETUP_PRIVATE_VPORT_ATTRIBUTE_RD(vport_type);
SETUP_VPORT_ATTRIBUTE_RW(symbolic_name);
SETUP_VPORT_ATTRIBUTE_WR(vport_delete);
SETUP_VPORT_ATTRIBUTE_WR(vport_disable);
BUG_ON(count > FC_VPORT_NUM_ATTRS);
i->vport_attrs[count] = NULL;
return &i->t;
}
EXPORT_SYMBOL(fc_attach_transport);
void fc_release_transport(struct scsi_transport_template *t)
{
struct fc_internal *i = to_fc_internal(t);
transport_container_unregister(&i->t.target_attrs);
transport_container_unregister(&i->t.host_attrs);
transport_container_unregister(&i->rport_attr_cont);
transport_container_unregister(&i->vport_attr_cont);
kfree(i);
}
EXPORT_SYMBOL(fc_release_transport);
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
/**
* fc_queue_work - Queue work to the fc_host workqueue.
* @shost: Pointer to Scsi_Host bound to fc_host.
* @work: Work to queue for execution.
*
* Return value:
[SCSI] fc transport: resolve scan vs delete deadlocks In a prior posting to linux-scsi on the fc transport and workq deadlocks, we noted a second error that did not have a patch: http://marc.theaimsgroup.com/?l=linux-scsi&m=114467847711383&w=2 - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). Subsequently we posted a request for comments about the deadlock: http://marc.theaimsgroup.com/?l=linux-scsi&m=114469358829500&w=2 This posting resolves the second error. Here's what we now understand, and are implementing: If the lldd deletes the rport while a scan is active, the sdev's queue is blocked which stops the issuing of commands associated with the scan. At this point, the scan stalls, and does so with the shost->scan_mutex held. If, at this point, if any scan or delete request is made on the host, it will stall waiting for the scan_mutex. For the FC transport, we queue all delete work to a single workq. So, things worked fine when competing with the scan, as long as the target blocking the scan was the same target at the top of our delete workq, as the delete workq routine always unblocked just prior to requesting the delete. Unfortunately, if the top of our delete workq was for a different target, we deadlock. Additionally, if the target blocking scan returned, we were unblocking it in the scan workq routine, which really won't execute until the existing stalled scan workq completes (e.g. we're re-scheduling it while it is in the midst of its execution). This patch moves the unblock out of the workq routines and moves it to the context that is scheduling the work. This ensures that at some point, we will unblock the target that is blocking scan. Please note, however, that the deadlock condition may still occur while it waits for the transport to timeout an unblock on a target. Worst case, this is bounded by the transport dev_loss_tmo (default: 30 seconds). Finally, Michael Reed deserves the credit for the bulk of this patch, analysis, and it's testing. Thank you for your help. Note: The request for comments statements about the gross-ness of the scan_mutex still stand. Signed-off-by: Michael Reed <mdr@sgi.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-12 01:27:09 +08:00
* 1 - work queued for execution
* 0 - work is already queued
* -EINVAL - work queue doesn't exist
*/
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
static int
fc_queue_work(struct Scsi_Host *shost, struct work_struct *work)
{
if (unlikely(!fc_host_work_q(shost))) {
printk(KERN_ERR
"ERROR: FC host '%s' attempted to queue work, "
"when no workqueue created.\n", shost->hostt->name);
dump_stack();
return -EINVAL;
}
return queue_work(fc_host_work_q(shost), work);
}
/**
* fc_flush_work - Flush a fc_host's workqueue.
* @shost: Pointer to Scsi_Host bound to fc_host.
*/
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
static void
fc_flush_work(struct Scsi_Host *shost)
{
if (!fc_host_work_q(shost)) {
printk(KERN_ERR
"ERROR: FC host '%s' attempted to flush work, "
"when no workqueue created.\n", shost->hostt->name);
dump_stack();
return;
}
flush_workqueue(fc_host_work_q(shost));
}
/**
* fc_queue_devloss_work - Schedule work for the fc_host devloss workqueue.
* @shost: Pointer to Scsi_Host bound to fc_host.
* @work: Work to queue for execution.
* @delay: jiffies to delay the work queuing
*
* Return value:
* 1 on success / 0 already queued / < 0 for error
*/
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
static int
fc_queue_devloss_work(struct Scsi_Host *shost, struct delayed_work *work,
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
unsigned long delay)
{
if (unlikely(!fc_host_devloss_work_q(shost))) {
printk(KERN_ERR
"ERROR: FC host '%s' attempted to queue work, "
"when no workqueue created.\n", shost->hostt->name);
dump_stack();
return -EINVAL;
}
return queue_delayed_work(fc_host_devloss_work_q(shost), work, delay);
}
/**
* fc_flush_devloss - Flush a fc_host's devloss workqueue.
* @shost: Pointer to Scsi_Host bound to fc_host.
*/
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
static void
fc_flush_devloss(struct Scsi_Host *shost)
{
if (!fc_host_devloss_work_q(shost)) {
printk(KERN_ERR
"ERROR: FC host '%s' attempted to flush work, "
"when no workqueue created.\n", shost->hostt->name);
dump_stack();
return;
}
flush_workqueue(fc_host_devloss_work_q(shost));
}
/**
* fc_remove_host - called to terminate any fc_transport-related elements for a scsi host.
* @shost: Which &Scsi_Host
*
* This routine is expected to be called immediately preceeding the
* a driver's call to scsi_remove_host().
*
* WARNING: A driver utilizing the fc_transport, which fails to call
* this routine prior to scsi_remove_host(), will leave dangling
* objects in /sys/class/fc_remote_ports. Access to any of these
* objects can result in a system crash !!!
*
* Notes:
* This routine assumes no locks are held on entry.
*/
void
fc_remove_host(struct Scsi_Host *shost)
{
struct fc_vport *vport = NULL, *next_vport = NULL;
struct fc_rport *rport = NULL, *next_rport = NULL;
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
struct workqueue_struct *work_q;
struct fc_host_attrs *fc_host = shost_to_fc_host(shost);
unsigned long flags;
spin_lock_irqsave(shost->host_lock, flags);
/* Remove any vports */
list_for_each_entry_safe(vport, next_vport, &fc_host->vports, peers)
fc_queue_work(shost, &vport->vport_delete_work);
/* Remove any remote ports */
list_for_each_entry_safe(rport, next_rport,
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
&fc_host->rports, peers) {
list_del(&rport->peers);
rport->port_state = FC_PORTSTATE_DELETED;
fc_queue_work(shost, &rport->rport_delete_work);
}
list_for_each_entry_safe(rport, next_rport,
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
&fc_host->rport_bindings, peers) {
list_del(&rport->peers);
rport->port_state = FC_PORTSTATE_DELETED;
fc_queue_work(shost, &rport->rport_delete_work);
}
spin_unlock_irqrestore(shost->host_lock, flags);
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
/* flush all scan work items */
scsi_flush_work(shost);
/* flush all stgt delete, and rport delete work items, then kill it */
if (fc_host->work_q) {
work_q = fc_host->work_q;
fc_host->work_q = NULL;
destroy_workqueue(work_q);
}
/* flush all devloss work items, then kill it */
if (fc_host->devloss_work_q) {
work_q = fc_host->devloss_work_q;
fc_host->devloss_work_q = NULL;
destroy_workqueue(work_q);
}
}
EXPORT_SYMBOL(fc_remove_host);
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
/**
* fc_starget_delete - called to delete the scsi decendents of an rport
* @work: remote port to be operated on.
*
* Deletes target and all sdevs.
*/
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
static void
fc_starget_delete(struct work_struct *work)
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
{
struct fc_rport *rport =
container_of(work, struct fc_rport, stgt_delete_work);
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
struct Scsi_Host *shost = rport_to_shost(rport);
struct fc_internal *i = to_fc_internal(shost->transportt);
/* Involve the LLDD if possible to terminate all io on the rport. */
if (i->f->terminate_rport_io)
i->f->terminate_rport_io(rport);
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
scsi_remove_target(&rport->dev);
}
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
/**
* fc_rport_final_delete - finish rport termination and delete it.
* @work: remote port to be deleted.
*/
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
static void
fc_rport_final_delete(struct work_struct *work)
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
{
struct fc_rport *rport =
container_of(work, struct fc_rport, rport_delete_work);
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
struct device *dev = &rport->dev;
struct Scsi_Host *shost = rport_to_shost(rport);
struct fc_internal *i = to_fc_internal(shost->transportt);
unsigned long flags;
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
/*
* if a scan is pending, flush the SCSI Host work_q so that
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
* that we can reclaim the rport scan work element.
*/
if (rport->flags & FC_RPORT_SCAN_PENDING)
scsi_flush_work(shost);
/* involve the LLDD to terminate all pending i/o */
if (i->f->terminate_rport_io)
i->f->terminate_rport_io(rport);
/*
* Cancel any outstanding timers. These should really exist
* only when rmmod'ing the LLDD and we're asking for
* immediate termination of the rports
*/
spin_lock_irqsave(shost->host_lock, flags);
if (rport->flags & FC_RPORT_DEVLOSS_PENDING) {
spin_unlock_irqrestore(shost->host_lock, flags);
if (!cancel_delayed_work(&rport->fail_io_work))
fc_flush_devloss(shost);
if (!cancel_delayed_work(&rport->dev_loss_work))
fc_flush_devloss(shost);
spin_lock_irqsave(shost->host_lock, flags);
rport->flags &= ~FC_RPORT_DEVLOSS_PENDING;
}
spin_unlock_irqrestore(shost->host_lock, flags);
/* Delete SCSI target and sdevs */
if (rport->scsi_target_id != -1)
fc_starget_delete(&rport->stgt_delete_work);
/*
* Notify the driver that the rport is now dead. The LLDD will
* also guarantee that any communication to the rport is terminated
*/
if (i->f->dev_loss_tmo_callbk)
i->f->dev_loss_tmo_callbk(rport);
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
transport_remove_device(dev);
device_del(dev);
transport_destroy_device(dev);
put_device(&shost->shost_gendev); /* for fc_host->rport list */
put_device(dev); /* for self-reference */
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
}
/**
* fc_rport_create - allocates and creates a remote FC port.
* @shost: scsi host the remote port is connected to.
* @channel: Channel on shost port connected to.
* @ids: The world wide names, fc address, and FC4 port
* roles for the remote port.
*
* Allocates and creates the remoter port structure, including the
* class and sysfs creation.
*
* Notes:
* This routine assumes no locks are held on entry.
*/
static struct fc_rport *
fc_rport_create(struct Scsi_Host *shost, int channel,
struct fc_rport_identifiers *ids)
{
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
struct fc_host_attrs *fc_host = shost_to_fc_host(shost);
struct fc_internal *fci = to_fc_internal(shost->transportt);
struct fc_rport *rport;
struct device *dev;
unsigned long flags;
int error;
size_t size;
size = (sizeof(struct fc_rport) + fci->f->dd_fcrport_size);
rport = kzalloc(size, GFP_KERNEL);
if (unlikely(!rport)) {
printk(KERN_ERR "%s: allocation failure\n", __func__);
return NULL;
}
rport->maxframe_size = -1;
rport->supported_classes = FC_COS_UNSPECIFIED;
rport->dev_loss_tmo = fc_dev_loss_tmo;
memcpy(&rport->node_name, &ids->node_name, sizeof(rport->node_name));
memcpy(&rport->port_name, &ids->port_name, sizeof(rport->port_name));
rport->port_id = ids->port_id;
rport->roles = ids->roles;
rport->port_state = FC_PORTSTATE_ONLINE;
if (fci->f->dd_fcrport_size)
rport->dd_data = &rport[1];
rport->channel = channel;
rport->fast_io_fail_tmo = -1;
INIT_DELAYED_WORK(&rport->dev_loss_work, fc_timeout_deleted_rport);
INIT_DELAYED_WORK(&rport->fail_io_work, fc_timeout_fail_rport_io);
INIT_WORK(&rport->scan_work, fc_scsi_scan_rport);
INIT_WORK(&rport->stgt_delete_work, fc_starget_delete);
INIT_WORK(&rport->rport_delete_work, fc_rport_final_delete);
spin_lock_irqsave(shost->host_lock, flags);
rport->number = fc_host->next_rport_number++;
if (rport->roles & FC_PORT_ROLE_FCP_TARGET)
rport->scsi_target_id = fc_host->next_target_id++;
else
rport->scsi_target_id = -1;
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
list_add_tail(&rport->peers, &fc_host->rports);
get_device(&shost->shost_gendev); /* for fc_host->rport list */
spin_unlock_irqrestore(shost->host_lock, flags);
dev = &rport->dev;
device_initialize(dev); /* takes self reference */
dev->parent = get_device(&shost->shost_gendev); /* parent reference */
dev->release = fc_rport_dev_release;
sprintf(dev->bus_id, "rport-%d:%d-%d",
shost->host_no, channel, rport->number);
transport_setup_device(dev);
error = device_add(dev);
if (error) {
printk(KERN_ERR "FC Remote Port device_add failed\n");
goto delete_rport;
}
transport_add_device(dev);
transport_configure_device(dev);
if (rport->roles & FC_PORT_ROLE_FCP_TARGET) {
/* initiate a scan of the target */
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
rport->flags |= FC_RPORT_SCAN_PENDING;
scsi_queue_work(shost, &rport->scan_work);
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
}
return rport;
delete_rport:
transport_destroy_device(dev);
spin_lock_irqsave(shost->host_lock, flags);
list_del(&rport->peers);
put_device(&shost->shost_gendev); /* for fc_host->rport list */
spin_unlock_irqrestore(shost->host_lock, flags);
put_device(dev->parent);
kfree(rport);
return NULL;
}
/**
* fc_remote_port_add - notify fc transport of the existence of a remote FC port.
* @shost: scsi host the remote port is connected to.
* @channel: Channel on shost port connected to.
* @ids: The world wide names, fc address, and FC4 port
* roles for the remote port.
*
* The LLDD calls this routine to notify the transport of the existence
* of a remote port. The LLDD provides the unique identifiers (wwpn,wwn)
* of the port, it's FC address (port_id), and the FC4 roles that are
* active for the port.
*
* For ports that are FCP targets (aka scsi targets), the FC transport
* maintains consistent target id bindings on behalf of the LLDD.
* A consistent target id binding is an assignment of a target id to
* a remote port identifier, which persists while the scsi host is
* attached. The remote port can disappear, then later reappear, and
* it's target id assignment remains the same. This allows for shifts
* in FC addressing (if binding by wwpn or wwnn) with no apparent
* changes to the scsi subsystem which is based on scsi host number and
* target id values. Bindings are only valid during the attachment of
* the scsi host. If the host detaches, then later re-attaches, target
* id bindings may change.
*
* This routine is responsible for returning a remote port structure.
* The routine will search the list of remote ports it maintains
* internally on behalf of consistent target id mappings. If found, the
* remote port structure will be reused. Otherwise, a new remote port
* structure will be allocated.
*
* Whenever a remote port is allocated, a new fc_remote_port class
* device is created.
*
* Should not be called from interrupt context.
*
* Notes:
* This routine assumes no locks are held on entry.
*/
struct fc_rport *
fc_remote_port_add(struct Scsi_Host *shost, int channel,
struct fc_rport_identifiers *ids)
{
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
struct fc_internal *fci = to_fc_internal(shost->transportt);
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
struct fc_host_attrs *fc_host = shost_to_fc_host(shost);
struct fc_rport *rport;
unsigned long flags;
int match = 0;
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
/* ensure any stgt delete functions are done */
fc_flush_work(shost);
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
/*
* Search the list of "active" rports, for an rport that has been
* deleted, but we've held off the real delete while the target
* is in a "blocked" state.
*/
spin_lock_irqsave(shost->host_lock, flags);
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
list_for_each_entry(rport, &fc_host->rports, peers) {
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
if ((rport->port_state == FC_PORTSTATE_BLOCKED) &&
(rport->channel == channel)) {
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
switch (fc_host->tgtid_bind_type) {
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
case FC_TGTID_BIND_BY_WWPN:
case FC_TGTID_BIND_NONE:
if (rport->port_name == ids->port_name)
match = 1;
break;
case FC_TGTID_BIND_BY_WWNN:
if (rport->node_name == ids->node_name)
match = 1;
break;
case FC_TGTID_BIND_BY_ID:
if (rport->port_id == ids->port_id)
match = 1;
break;
}
if (match) {
memcpy(&rport->node_name, &ids->node_name,
sizeof(rport->node_name));
memcpy(&rport->port_name, &ids->port_name,
sizeof(rport->port_name));
rport->port_id = ids->port_id;
rport->port_state = FC_PORTSTATE_ONLINE;
rport->roles = ids->roles;
spin_unlock_irqrestore(shost->host_lock, flags);
if (fci->f->dd_fcrport_size)
memset(rport->dd_data, 0,
fci->f->dd_fcrport_size);
/*
* If we were not a target, cancel the
* io terminate and rport timers, and
* we're done.
*
* If we were a target, but our new role
* doesn't indicate a target, leave the
* timers running expecting the role to
* change as the target fully logs in. If
* it doesn't, the target will be torn down.
*
* If we were a target, and our role shows
* we're still a target, cancel the timers
* and kick off a scan.
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
*/
/* was a target, not in roles */
if ((rport->scsi_target_id != -1) &&
(!(ids->roles & FC_PORT_ROLE_FCP_TARGET)))
return rport;
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
/*
* Stop the fail io and dev_loss timers.
* If they flush, the port_state will
* be checked and will NOOP the function.
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
*/
if (!cancel_delayed_work(&rport->fail_io_work))
fc_flush_devloss(shost);
if (!cancel_delayed_work(&rport->dev_loss_work))
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
fc_flush_devloss(shost);
spin_lock_irqsave(shost->host_lock, flags);
rport->flags &= ~FC_RPORT_DEVLOSS_PENDING;
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
/* if target, initiate a scan */
if (rport->scsi_target_id != -1) {
rport->flags |= FC_RPORT_SCAN_PENDING;
scsi_queue_work(shost,
&rport->scan_work);
spin_unlock_irqrestore(shost->host_lock,
flags);
scsi_target_unblock(&rport->dev);
} else
spin_unlock_irqrestore(shost->host_lock,
flags);
[SCSI] fc transport: resolve scan vs delete deadlocks In a prior posting to linux-scsi on the fc transport and workq deadlocks, we noted a second error that did not have a patch: http://marc.theaimsgroup.com/?l=linux-scsi&m=114467847711383&w=2 - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). Subsequently we posted a request for comments about the deadlock: http://marc.theaimsgroup.com/?l=linux-scsi&m=114469358829500&w=2 This posting resolves the second error. Here's what we now understand, and are implementing: If the lldd deletes the rport while a scan is active, the sdev's queue is blocked which stops the issuing of commands associated with the scan. At this point, the scan stalls, and does so with the shost->scan_mutex held. If, at this point, if any scan or delete request is made on the host, it will stall waiting for the scan_mutex. For the FC transport, we queue all delete work to a single workq. So, things worked fine when competing with the scan, as long as the target blocking the scan was the same target at the top of our delete workq, as the delete workq routine always unblocked just prior to requesting the delete. Unfortunately, if the top of our delete workq was for a different target, we deadlock. Additionally, if the target blocking scan returned, we were unblocking it in the scan workq routine, which really won't execute until the existing stalled scan workq completes (e.g. we're re-scheduling it while it is in the midst of its execution). This patch moves the unblock out of the workq routines and moves it to the context that is scheduling the work. This ensures that at some point, we will unblock the target that is blocking scan. Please note, however, that the deadlock condition may still occur while it waits for the transport to timeout an unblock on a target. Worst case, this is bounded by the transport dev_loss_tmo (default: 30 seconds). Finally, Michael Reed deserves the credit for the bulk of this patch, analysis, and it's testing. Thank you for your help. Note: The request for comments statements about the gross-ness of the scan_mutex still stand. Signed-off-by: Michael Reed <mdr@sgi.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-12 01:27:09 +08:00
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
return rport;
}
}
}
/*
* Search the bindings array
* Note: if never a FCP target, you won't be on this list
*/
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
if (fc_host->tgtid_bind_type != FC_TGTID_BIND_NONE) {
/* search for a matching consistent binding */
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
list_for_each_entry(rport, &fc_host->rport_bindings,
peers) {
if (rport->channel != channel)
continue;
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
switch (fc_host->tgtid_bind_type) {
case FC_TGTID_BIND_BY_WWPN:
if (rport->port_name == ids->port_name)
match = 1;
break;
case FC_TGTID_BIND_BY_WWNN:
if (rport->node_name == ids->node_name)
match = 1;
break;
case FC_TGTID_BIND_BY_ID:
if (rport->port_id == ids->port_id)
match = 1;
break;
case FC_TGTID_BIND_NONE: /* to keep compiler happy */
break;
}
if (match) {
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
list_move_tail(&rport->peers, &fc_host->rports);
break;
}
}
if (match) {
memcpy(&rport->node_name, &ids->node_name,
sizeof(rport->node_name));
memcpy(&rport->port_name, &ids->port_name,
sizeof(rport->port_name));
rport->port_id = ids->port_id;
rport->roles = ids->roles;
rport->port_state = FC_PORTSTATE_ONLINE;
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
if (fci->f->dd_fcrport_size)
memset(rport->dd_data, 0,
fci->f->dd_fcrport_size);
if (rport->roles & FC_PORT_ROLE_FCP_TARGET) {
/* initiate a scan of the target */
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
rport->flags |= FC_RPORT_SCAN_PENDING;
scsi_queue_work(shost, &rport->scan_work);
[SCSI] fc transport: resolve scan vs delete deadlocks In a prior posting to linux-scsi on the fc transport and workq deadlocks, we noted a second error that did not have a patch: http://marc.theaimsgroup.com/?l=linux-scsi&m=114467847711383&w=2 - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). Subsequently we posted a request for comments about the deadlock: http://marc.theaimsgroup.com/?l=linux-scsi&m=114469358829500&w=2 This posting resolves the second error. Here's what we now understand, and are implementing: If the lldd deletes the rport while a scan is active, the sdev's queue is blocked which stops the issuing of commands associated with the scan. At this point, the scan stalls, and does so with the shost->scan_mutex held. If, at this point, if any scan or delete request is made on the host, it will stall waiting for the scan_mutex. For the FC transport, we queue all delete work to a single workq. So, things worked fine when competing with the scan, as long as the target blocking the scan was the same target at the top of our delete workq, as the delete workq routine always unblocked just prior to requesting the delete. Unfortunately, if the top of our delete workq was for a different target, we deadlock. Additionally, if the target blocking scan returned, we were unblocking it in the scan workq routine, which really won't execute until the existing stalled scan workq completes (e.g. we're re-scheduling it while it is in the midst of its execution). This patch moves the unblock out of the workq routines and moves it to the context that is scheduling the work. This ensures that at some point, we will unblock the target that is blocking scan. Please note, however, that the deadlock condition may still occur while it waits for the transport to timeout an unblock on a target. Worst case, this is bounded by the transport dev_loss_tmo (default: 30 seconds). Finally, Michael Reed deserves the credit for the bulk of this patch, analysis, and it's testing. Thank you for your help. Note: The request for comments statements about the gross-ness of the scan_mutex still stand. Signed-off-by: Michael Reed <mdr@sgi.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-12 01:27:09 +08:00
spin_unlock_irqrestore(shost->host_lock, flags);
scsi_target_unblock(&rport->dev);
} else
spin_unlock_irqrestore(shost->host_lock, flags);
return rport;
}
}
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
spin_unlock_irqrestore(shost->host_lock, flags);
/* No consistent binding found - create new remote port entry */
rport = fc_rport_create(shost, channel, ids);
return rport;
}
EXPORT_SYMBOL(fc_remote_port_add);
/**
* fc_remote_port_delete - notifies the fc transport that a remote port is no longer in existence.
* @rport: The remote port that no longer exists
*
* The LLDD calls this routine to notify the transport that a remote
* port is no longer part of the topology. Note: Although a port
* may no longer be part of the topology, it may persist in the remote
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
* ports displayed by the fc_host. We do this under 2 conditions:
* 1) If the port was a scsi target, we delay its deletion by "blocking" it.
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
* This allows the port to temporarily disappear, then reappear without
* disrupting the SCSI device tree attached to it. During the "blocked"
* period the port will still exist.
* 2) If the port was a scsi target and disappears for longer than we
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
* expect, we'll delete the port and the tear down the SCSI device tree
* attached to it. However, we want to semi-persist the target id assigned
* to that port if it eventually does exist. The port structure will
* remain (although with minimal information) so that the target id
* bindings remails.
*
* If the remote port is not an FCP Target, it will be fully torn down
* and deallocated, including the fc_remote_port class device.
*
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
* If the remote port is an FCP Target, the port will be placed in a
* temporary blocked state. From the LLDD's perspective, the rport no
* longer exists. From the SCSI midlayer's perspective, the SCSI target
* exists, but all sdevs on it are blocked from further I/O. The following
* is then expected.
*
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
* If the remote port does not return (signaled by a LLDD call to
* fc_remote_port_add()) within the dev_loss_tmo timeout, then the
* scsi target is removed - killing all outstanding i/o and removing the
* scsi devices attached ot it. The port structure will be marked Not
* Present and be partially cleared, leaving only enough information to
* recognize the remote port relative to the scsi target id binding if
* it later appears. The port will remain as long as there is a valid
* binding (e.g. until the user changes the binding type or unloads the
* scsi host with the binding).
*
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
* If the remote port returns within the dev_loss_tmo value (and matches
* according to the target id binding type), the port structure will be
* reused. If it is no longer a SCSI target, the target will be torn
* down. If it continues to be a SCSI target, then the target will be
* unblocked (allowing i/o to be resumed), and a scan will be activated
* to ensure that all luns are detected.
*
* Called from normal process context only - cannot be called from interrupt.
*
* Notes:
* This routine assumes no locks are held on entry.
*/
void
fc_remote_port_delete(struct fc_rport *rport)
{
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
struct Scsi_Host *shost = rport_to_shost(rport);
struct fc_internal *i = to_fc_internal(shost->transportt);
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
int timeout = rport->dev_loss_tmo;
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
unsigned long flags;
/*
* No need to flush the fc_host work_q's, as all adds are synchronous.
*
* We do need to reclaim the rport scan work element, so eventually
* (in fc_rport_final_delete()) we'll flush the scsi host work_q if
* there's still a scan pending.
*/
spin_lock_irqsave(shost->host_lock, flags);
if (rport->port_state != FC_PORTSTATE_ONLINE) {
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
spin_unlock_irqrestore(shost->host_lock, flags);
return;
}
/*
* In the past, we if this was not an FCP-Target, we would
* unconditionally just jump to deleting the rport.
* However, rports can be used as node containers by the LLDD,
* and its not appropriate to just terminate the rport at the
* first sign of a loss in connectivity. The LLDD may want to
* send ELS traffic to re-validate the login. If the rport is
* immediately deleted, it makes it inappropriate for a node
* container.
* So... we now unconditionally wait dev_loss_tmo before
* destroying an rport.
*/
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
rport->port_state = FC_PORTSTATE_BLOCKED;
rport->flags |= FC_RPORT_DEVLOSS_PENDING;
spin_unlock_irqrestore(shost->host_lock, flags);
if (rport->roles & FC_PORT_ROLE_FCP_INITIATOR &&
shost->active_mode & MODE_TARGET)
fc_tgt_it_nexus_destroy(shost, (unsigned long)rport);
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
scsi_target_block(&rport->dev);
/* see if we need to kill io faster than waiting for device loss */
if ((rport->fast_io_fail_tmo != -1) &&
(rport->fast_io_fail_tmo < timeout) && (i->f->terminate_rport_io))
fc_queue_devloss_work(shost, &rport->fail_io_work,
rport->fast_io_fail_tmo * HZ);
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
/* cap the length the devices can be blocked until they are deleted */
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
fc_queue_devloss_work(shost, &rport->dev_loss_work, timeout * HZ);
}
EXPORT_SYMBOL(fc_remote_port_delete);
/**
* fc_remote_port_rolechg - notifies the fc transport that the roles on a remote may have changed.
* @rport: The remote port that changed.
* @roles: New roles for this port.
*
* Description: The LLDD calls this routine to notify the transport that the
* roles on a remote port may have changed. The largest effect of this is
* if a port now becomes a FCP Target, it must be allocated a
* scsi target id. If the port is no longer a FCP target, any
* scsi target id value assigned to it will persist in case the
* role changes back to include FCP Target. No changes in the scsi
* midlayer will be invoked if the role changes (in the expectation
* that the role will be resumed. If it doesn't normal error processing
* will take place).
*
* Should not be called from interrupt context.
*
* Notes:
* This routine assumes no locks are held on entry.
*/
void
fc_remote_port_rolechg(struct fc_rport *rport, u32 roles)
{
struct Scsi_Host *shost = rport_to_shost(rport);
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
struct fc_host_attrs *fc_host = shost_to_fc_host(shost);
unsigned long flags;
int create = 0;
int ret;
spin_lock_irqsave(shost->host_lock, flags);
if (roles & FC_PORT_ROLE_FCP_TARGET) {
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
if (rport->scsi_target_id == -1) {
rport->scsi_target_id = fc_host->next_target_id++;
create = 1;
} else if (!(rport->roles & FC_PORT_ROLE_FCP_TARGET))
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
create = 1;
} else if (shost->active_mode & MODE_TARGET) {
ret = fc_tgt_it_nexus_create(shost, (unsigned long)rport,
(char *)&rport->node_name);
if (ret)
printk(KERN_ERR "FC Remore Port tgt nexus failed %d\n",
ret);
}
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
rport->roles = roles;
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
spin_unlock_irqrestore(shost->host_lock, flags);
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
if (create) {
/*
* There may have been a delete timer running on the
* port. Ensure that it is cancelled as we now know
* the port is an FCP Target.
* Note: we know the rport is exists and in an online
* state as the LLDD would not have had an rport
* reference to pass us.
*
* Take no action on the del_timer failure as the state
* machine state change will validate the
* transaction.
*/
if (!cancel_delayed_work(&rport->fail_io_work))
fc_flush_devloss(shost);
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
if (!cancel_delayed_work(&rport->dev_loss_work))
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
fc_flush_devloss(shost);
spin_lock_irqsave(shost->host_lock, flags);
rport->flags &= ~FC_RPORT_DEVLOSS_PENDING;
spin_unlock_irqrestore(shost->host_lock, flags);
/* ensure any stgt delete functions are done */
fc_flush_work(shost);
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
/* initiate a scan of the target */
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
spin_lock_irqsave(shost->host_lock, flags);
rport->flags |= FC_RPORT_SCAN_PENDING;
scsi_queue_work(shost, &rport->scan_work);
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
spin_unlock_irqrestore(shost->host_lock, flags);
[SCSI] fc transport: resolve scan vs delete deadlocks In a prior posting to linux-scsi on the fc transport and workq deadlocks, we noted a second error that did not have a patch: http://marc.theaimsgroup.com/?l=linux-scsi&m=114467847711383&w=2 - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). Subsequently we posted a request for comments about the deadlock: http://marc.theaimsgroup.com/?l=linux-scsi&m=114469358829500&w=2 This posting resolves the second error. Here's what we now understand, and are implementing: If the lldd deletes the rport while a scan is active, the sdev's queue is blocked which stops the issuing of commands associated with the scan. At this point, the scan stalls, and does so with the shost->scan_mutex held. If, at this point, if any scan or delete request is made on the host, it will stall waiting for the scan_mutex. For the FC transport, we queue all delete work to a single workq. So, things worked fine when competing with the scan, as long as the target blocking the scan was the same target at the top of our delete workq, as the delete workq routine always unblocked just prior to requesting the delete. Unfortunately, if the top of our delete workq was for a different target, we deadlock. Additionally, if the target blocking scan returned, we were unblocking it in the scan workq routine, which really won't execute until the existing stalled scan workq completes (e.g. we're re-scheduling it while it is in the midst of its execution). This patch moves the unblock out of the workq routines and moves it to the context that is scheduling the work. This ensures that at some point, we will unblock the target that is blocking scan. Please note, however, that the deadlock condition may still occur while it waits for the transport to timeout an unblock on a target. Worst case, this is bounded by the transport dev_loss_tmo (default: 30 seconds). Finally, Michael Reed deserves the credit for the bulk of this patch, analysis, and it's testing. Thank you for your help. Note: The request for comments statements about the gross-ness of the scan_mutex still stand. Signed-off-by: Michael Reed <mdr@sgi.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-12 01:27:09 +08:00
scsi_target_unblock(&rport->dev);
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
}
}
EXPORT_SYMBOL(fc_remote_port_rolechg);
/**
* fc_timeout_deleted_rport - Timeout handler for a deleted remote port.
* @work: rport target that failed to reappear in the allotted time.
*
* Description: An attempt to delete a remote port blocks, and if it fails
* to return in the allotted time this gets called.
*/
static void
fc_timeout_deleted_rport(struct work_struct *work)
{
struct fc_rport *rport =
container_of(work, struct fc_rport, dev_loss_work.work);
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
struct Scsi_Host *shost = rport_to_shost(rport);
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
struct fc_host_attrs *fc_host = shost_to_fc_host(shost);
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
unsigned long flags;
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
spin_lock_irqsave(shost->host_lock, flags);
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
rport->flags &= ~FC_RPORT_DEVLOSS_PENDING;
/*
* If the port is ONLINE, then it came back. If it was a SCSI
* target, validate it still is. If not, tear down the
* scsi_target on it.
*/
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
if ((rport->port_state == FC_PORTSTATE_ONLINE) &&
(rport->scsi_target_id != -1) &&
!(rport->roles & FC_PORT_ROLE_FCP_TARGET)) {
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
dev_printk(KERN_ERR, &rport->dev,
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
"blocked FC remote port time out: no longer"
" a FCP target, removing starget\n");
spin_unlock_irqrestore(shost->host_lock, flags);
[SCSI] fc transport: resolve scan vs delete deadlocks In a prior posting to linux-scsi on the fc transport and workq deadlocks, we noted a second error that did not have a patch: http://marc.theaimsgroup.com/?l=linux-scsi&m=114467847711383&w=2 - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). Subsequently we posted a request for comments about the deadlock: http://marc.theaimsgroup.com/?l=linux-scsi&m=114469358829500&w=2 This posting resolves the second error. Here's what we now understand, and are implementing: If the lldd deletes the rport while a scan is active, the sdev's queue is blocked which stops the issuing of commands associated with the scan. At this point, the scan stalls, and does so with the shost->scan_mutex held. If, at this point, if any scan or delete request is made on the host, it will stall waiting for the scan_mutex. For the FC transport, we queue all delete work to a single workq. So, things worked fine when competing with the scan, as long as the target blocking the scan was the same target at the top of our delete workq, as the delete workq routine always unblocked just prior to requesting the delete. Unfortunately, if the top of our delete workq was for a different target, we deadlock. Additionally, if the target blocking scan returned, we were unblocking it in the scan workq routine, which really won't execute until the existing stalled scan workq completes (e.g. we're re-scheduling it while it is in the midst of its execution). This patch moves the unblock out of the workq routines and moves it to the context that is scheduling the work. This ensures that at some point, we will unblock the target that is blocking scan. Please note, however, that the deadlock condition may still occur while it waits for the transport to timeout an unblock on a target. Worst case, this is bounded by the transport dev_loss_tmo (default: 30 seconds). Finally, Michael Reed deserves the credit for the bulk of this patch, analysis, and it's testing. Thank you for your help. Note: The request for comments statements about the gross-ness of the scan_mutex still stand. Signed-off-by: Michael Reed <mdr@sgi.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-12 01:27:09 +08:00
scsi_target_unblock(&rport->dev);
fc_queue_work(shost, &rport->stgt_delete_work);
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
return;
}
/* NOOP state - we're flushing workq's */
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
if (rport->port_state != FC_PORTSTATE_BLOCKED) {
spin_unlock_irqrestore(shost->host_lock, flags);
dev_printk(KERN_ERR, &rport->dev,
"blocked FC remote port time out: leaving"
" rport%s alone\n",
(rport->scsi_target_id != -1) ? " and starget" : "");
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
return;
}
if ((fc_host->tgtid_bind_type == FC_TGTID_BIND_NONE) ||
(rport->scsi_target_id == -1)) {
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
list_del(&rport->peers);
rport->port_state = FC_PORTSTATE_DELETED;
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
dev_printk(KERN_ERR, &rport->dev,
"blocked FC remote port time out: removing"
" rport%s\n",
(rport->scsi_target_id != -1) ? " and starget" : "");
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
fc_queue_work(shost, &rport->rport_delete_work);
spin_unlock_irqrestore(shost->host_lock, flags);
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
return;
}
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
dev_printk(KERN_ERR, &rport->dev,
"blocked FC remote port time out: removing target and "
"saving binding\n");
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
list_move_tail(&rport->peers, &fc_host->rport_bindings);
/*
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
* Note: We do not remove or clear the hostdata area. This allows
* host-specific target data to persist along with the
* scsi_target_id. It's up to the host to manage it's hostdata area.
*/
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
/*
* Reinitialize port attributes that may change if the port comes back.
*/
rport->maxframe_size = -1;
rport->supported_classes = FC_COS_UNSPECIFIED;
rport->roles = FC_PORT_ROLE_UNKNOWN;
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
rport->port_state = FC_PORTSTATE_NOTPRESENT;
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
/* remove the identifiers that aren't used in the consisting binding */
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
switch (fc_host->tgtid_bind_type) {
[SCSI] update fc_transport for removal of block/unblock functions We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-19 00:03:35 +08:00
case FC_TGTID_BIND_BY_WWPN:
rport->node_name = -1;
rport->port_id = -1;
break;
case FC_TGTID_BIND_BY_WWNN:
rport->port_name = -1;
rport->port_id = -1;
break;
case FC_TGTID_BIND_BY_ID:
rport->node_name = -1;
rport->port_name = -1;
break;
case FC_TGTID_BIND_NONE: /* to keep compiler happy */
break;
}
/*
* As this only occurs if the remote port (scsi target)
* went away and didn't come back - we'll remove
* all attached scsi devices.
*/
spin_unlock_irqrestore(shost->host_lock, flags);
[SCSI] fc transport: resolve scan vs delete deadlocks In a prior posting to linux-scsi on the fc transport and workq deadlocks, we noted a second error that did not have a patch: http://marc.theaimsgroup.com/?l=linux-scsi&m=114467847711383&w=2 - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). Subsequently we posted a request for comments about the deadlock: http://marc.theaimsgroup.com/?l=linux-scsi&m=114469358829500&w=2 This posting resolves the second error. Here's what we now understand, and are implementing: If the lldd deletes the rport while a scan is active, the sdev's queue is blocked which stops the issuing of commands associated with the scan. At this point, the scan stalls, and does so with the shost->scan_mutex held. If, at this point, if any scan or delete request is made on the host, it will stall waiting for the scan_mutex. For the FC transport, we queue all delete work to a single workq. So, things worked fine when competing with the scan, as long as the target blocking the scan was the same target at the top of our delete workq, as the delete workq routine always unblocked just prior to requesting the delete. Unfortunately, if the top of our delete workq was for a different target, we deadlock. Additionally, if the target blocking scan returned, we were unblocking it in the scan workq routine, which really won't execute until the existing stalled scan workq completes (e.g. we're re-scheduling it while it is in the midst of its execution). This patch moves the unblock out of the workq routines and moves it to the context that is scheduling the work. This ensures that at some point, we will unblock the target that is blocking scan. Please note, however, that the deadlock condition may still occur while it waits for the transport to timeout an unblock on a target. Worst case, this is bounded by the transport dev_loss_tmo (default: 30 seconds). Finally, Michael Reed deserves the credit for the bulk of this patch, analysis, and it's testing. Thank you for your help. Note: The request for comments statements about the gross-ness of the scan_mutex still stand. Signed-off-by: Michael Reed <mdr@sgi.com> Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-05-12 01:27:09 +08:00
scsi_target_unblock(&rport->dev);
fc_queue_work(shost, &rport->stgt_delete_work);
}
/**
* fc_timeout_fail_rport_io - Timeout handler for a fast io failing on a disconnected SCSI target.
* @work: rport to terminate io on.
*
* Notes: Only requests the failure of the io, not that all are flushed
* prior to returning.
*/
static void
fc_timeout_fail_rport_io(struct work_struct *work)
{
struct fc_rport *rport =
container_of(work, struct fc_rport, fail_io_work.work);
struct Scsi_Host *shost = rport_to_shost(rport);
struct fc_internal *i = to_fc_internal(shost->transportt);
if (rport->port_state != FC_PORTSTATE_BLOCKED)
return;
i->f->terminate_rport_io(rport);
}
/**
* fc_scsi_scan_rport - called to perform a scsi scan on a remote port.
* @work: remote port to be scanned.
*/
static void
fc_scsi_scan_rport(struct work_struct *work)
{
struct fc_rport *rport =
container_of(work, struct fc_rport, scan_work);
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
struct Scsi_Host *shost = rport_to_shost(rport);
struct fc_internal *i = to_fc_internal(shost->transportt);
unsigned long flags;
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
if ((rport->port_state == FC_PORTSTATE_ONLINE) &&
(rport->roles & FC_PORT_ROLE_FCP_TARGET) &&
!(i->f->disable_target_scan)) {
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
scsi_scan_target(&rport->dev, rport->channel,
rport->scsi_target_id, SCAN_WILD_CARD, 1);
}
[SCSI] FC transport: fixes for workq deadlocks As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-10 22:14:05 +08:00
spin_lock_irqsave(shost->host_lock, flags);
rport->flags &= ~FC_RPORT_SCAN_PENDING;
spin_unlock_irqrestore(shost->host_lock, flags);
}
/**
* fc_vport_setup - allocates and creates a FC virtual port.
* @shost: scsi host the virtual port is connected to.
* @channel: Channel on shost port connected to.
* @pdev: parent device for vport
* @ids: The world wide names, FC4 port roles, etc for
* the virtual port.
* @ret_vport: The pointer to the created vport.
*
* Allocates and creates the vport structure, calls the parent host
* to instantiate the vport, the completes w/ class and sysfs creation.
*
* Notes:
* This routine assumes no locks are held on entry.
*/
static int
fc_vport_setup(struct Scsi_Host *shost, int channel, struct device *pdev,
struct fc_vport_identifiers *ids, struct fc_vport **ret_vport)
{
struct fc_host_attrs *fc_host = shost_to_fc_host(shost);
struct fc_internal *fci = to_fc_internal(shost->transportt);
struct fc_vport *vport;
struct device *dev;
unsigned long flags;
size_t size;
int error;
*ret_vport = NULL;
if ( ! fci->f->vport_create)
return -ENOENT;
size = (sizeof(struct fc_vport) + fci->f->dd_fcvport_size);
vport = kzalloc(size, GFP_KERNEL);
if (unlikely(!vport)) {
printk(KERN_ERR "%s: allocation failure\n", __func__);
return -ENOMEM;
}
vport->vport_state = FC_VPORT_UNKNOWN;
vport->vport_last_state = FC_VPORT_UNKNOWN;
vport->node_name = ids->node_name;
vport->port_name = ids->port_name;
vport->roles = ids->roles;
vport->vport_type = ids->vport_type;
if (fci->f->dd_fcvport_size)
vport->dd_data = &vport[1];
vport->shost = shost;
vport->channel = channel;
vport->flags = FC_VPORT_CREATING;
INIT_WORK(&vport->vport_delete_work, fc_vport_sched_delete);
spin_lock_irqsave(shost->host_lock, flags);
if (fc_host->npiv_vports_inuse >= fc_host->max_npiv_vports) {
spin_unlock_irqrestore(shost->host_lock, flags);
kfree(vport);
return -ENOSPC;
}
fc_host->npiv_vports_inuse++;
vport->number = fc_host->next_vport_number++;
list_add_tail(&vport->peers, &fc_host->vports);
get_device(&shost->shost_gendev); /* for fc_host->vport list */
spin_unlock_irqrestore(shost->host_lock, flags);
dev = &vport->dev;
device_initialize(dev); /* takes self reference */
dev->parent = get_device(pdev); /* takes parent reference */
dev->release = fc_vport_dev_release;
sprintf(dev->bus_id, "vport-%d:%d-%d",
shost->host_no, channel, vport->number);
transport_setup_device(dev);
error = device_add(dev);
if (error) {
printk(KERN_ERR "FC Virtual Port device_add failed\n");
goto delete_vport;
}
transport_add_device(dev);
transport_configure_device(dev);
error = fci->f->vport_create(vport, ids->disable);
if (error) {
printk(KERN_ERR "FC Virtual Port LLDD Create failed\n");
goto delete_vport_all;
}
/*
* if the parent isn't the physical adapter's Scsi_Host, ensure
* the Scsi_Host at least contains ia symlink to the vport.
*/
if (pdev != &shost->shost_gendev) {
error = sysfs_create_link(&shost->shost_gendev.kobj,
&dev->kobj, dev->bus_id);
if (error)
printk(KERN_ERR
"%s: Cannot create vport symlinks for "
"%s, err=%d\n",
__func__, dev->bus_id, error);
}
spin_lock_irqsave(shost->host_lock, flags);
vport->flags &= ~FC_VPORT_CREATING;
spin_unlock_irqrestore(shost->host_lock, flags);
dev_printk(KERN_NOTICE, pdev,
"%s created via shost%d channel %d\n", dev->bus_id,
shost->host_no, channel);
*ret_vport = vport;
return 0;
delete_vport_all:
transport_remove_device(dev);
device_del(dev);
delete_vport:
transport_destroy_device(dev);
spin_lock_irqsave(shost->host_lock, flags);
list_del(&vport->peers);
put_device(&shost->shost_gendev); /* for fc_host->vport list */
fc_host->npiv_vports_inuse--;
spin_unlock_irqrestore(shost->host_lock, flags);
put_device(dev->parent);
kfree(vport);
return error;
}
/**
* fc_vport_create - Admin App or LLDD requests creation of a vport
* @shost: scsi host the virtual port is connected to.
* @channel: channel on shost port connected to.
* @ids: The world wide names, FC4 port roles, etc for
* the virtual port.
*
* Notes:
* This routine assumes no locks are held on entry.
*/
struct fc_vport *
fc_vport_create(struct Scsi_Host *shost, int channel,
struct fc_vport_identifiers *ids)
{
int stat;
struct fc_vport *vport;
stat = fc_vport_setup(shost, channel, &shost->shost_gendev,
ids, &vport);
return stat ? NULL : vport;
}
EXPORT_SYMBOL(fc_vport_create);
/**
* fc_vport_terminate - Admin App or LLDD requests termination of a vport
* @vport: fc_vport to be terminated
*
* Calls the LLDD vport_delete() function, then deallocates and removes
* the vport from the shost and object tree.
*
* Notes:
* This routine assumes no locks are held on entry.
*/
int
fc_vport_terminate(struct fc_vport *vport)
{
struct Scsi_Host *shost = vport_to_shost(vport);
struct fc_host_attrs *fc_host = shost_to_fc_host(shost);
struct fc_internal *i = to_fc_internal(shost->transportt);
struct device *dev = &vport->dev;
unsigned long flags;
int stat;
spin_lock_irqsave(shost->host_lock, flags);
if (vport->flags & FC_VPORT_CREATING) {
spin_unlock_irqrestore(shost->host_lock, flags);
return -EBUSY;
}
if (vport->flags & (FC_VPORT_DEL)) {
spin_unlock_irqrestore(shost->host_lock, flags);
return -EALREADY;
}
vport->flags |= FC_VPORT_DELETING;
spin_unlock_irqrestore(shost->host_lock, flags);
if (i->f->vport_delete)
stat = i->f->vport_delete(vport);
else
stat = -ENOENT;
spin_lock_irqsave(shost->host_lock, flags);
vport->flags &= ~FC_VPORT_DELETING;
if (!stat) {
vport->flags |= FC_VPORT_DELETED;
list_del(&vport->peers);
fc_host->npiv_vports_inuse--;
put_device(&shost->shost_gendev); /* for fc_host->vport list */
}
spin_unlock_irqrestore(shost->host_lock, flags);
if (stat)
return stat;
if (dev->parent != &shost->shost_gendev)
sysfs_remove_link(&shost->shost_gendev.kobj, dev->bus_id);
transport_remove_device(dev);
device_del(dev);
transport_destroy_device(dev);
/*
* Removing our self-reference should mean our
* release function gets called, which will drop the remaining
* parent reference and free the data structure.
*/
put_device(dev); /* for self-reference */
return 0; /* SUCCESS */
}
EXPORT_SYMBOL(fc_vport_terminate);
/**
* fc_vport_sched_delete - workq-based delete request for a vport
* @work: vport to be deleted.
*/
static void
fc_vport_sched_delete(struct work_struct *work)
{
struct fc_vport *vport =
container_of(work, struct fc_vport, vport_delete_work);
int stat;
stat = fc_vport_terminate(vport);
if (stat)
dev_printk(KERN_ERR, vport->dev.parent,
"%s: %s could not be deleted created via "
"shost%d channel %d - error %d\n", __func__,
vport->dev.bus_id, vport->shost->host_no,
vport->channel, stat);
}
/* Original Author: Martin Hicks */
MODULE_AUTHOR("James Smart");
MODULE_DESCRIPTION("FC Transport Attributes");
MODULE_LICENSE("GPL");
module_init(fc_transport_init);
module_exit(fc_transport_exit);