linux-sg2042/net/sched/sch_codel.c

288 lines
7.8 KiB
C
Raw Normal View History

codel: Controlled Delay AQM An implementation of CoDel AQM, from Kathleen Nichols and Van Jacobson. http://queue.acm.org/detail.cfm?id=2209336 This AQM main input is no longer queue size in bytes or packets, but the delay packets stay in (FIFO) queue. As we don't have infinite memory, we still can drop packets in enqueue() in case of massive load, but mean of CoDel is to drop packets in dequeue(), using a control law based on two simple parameters : target : target sojourn time (default 5ms) interval : width of moving time window (default 100ms) Based on initial work from Dave Taht. Refactored to help future codel inclusion as a plugin for other linux qdisc (FQ_CODEL, ...), like RED. include/net/codel.h contains codel algorithm as close as possible than Kathleen reference. net/sched/sch_codel.c contains the linux qdisc specific glue. Separate structures permit a memory efficient implementation of fq_codel (to be sent as a separate work) : Each flow has its own struct codel_vars. timestamps are taken at enqueue() time with 1024 ns precision, allowing a range of 2199 seconds in queue, and 100Gb links support. iproute2 uses usec as base unit. Selected packets are dropped, unless ECN is enabled and packets can get ECN mark instead. Tested from 2Mb to 10Gb speeds with no particular problems, on ixgbe and tg3 drivers (BQL enabled). Usage: tc qdisc ... codel [ limit PACKETS ] [ target TIME ] [ interval TIME ] [ ecn ] qdisc codel 10: parent 1:1 limit 2000p target 3.0ms interval 60.0ms ecn Sent 13347099587 bytes 8815805 pkt (dropped 0, overlimits 0 requeues 0) rate 202365Kbit 16708pps backlog 113550b 75p requeues 0 count 116 lastcount 98 ldelay 4.3ms dropping drop_next 816us maxpacket 1514 ecn_mark 84399 drop_overlimit 0 CoDel must be seen as a base module, and should be used keeping in mind there is still a FIFO queue. So a typical setup will probably need a hierarchy of several qdiscs and packet classifiers to be able to meet whatever constraints a user might have. One possible example would be to use fq_codel, which combines Fair Queueing and CoDel, in replacement of sfq / sfq_red. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Dave Taht <dave.taht@bufferbloat.net> Cc: Kathleen Nichols <nichols@pollere.com> Cc: Van Jacobson <van@pollere.net> Cc: Tom Herbert <therbert@google.com> Cc: Matt Mathis <mattmathis@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-10 15:51:25 +08:00
/*
* Codel - The Controlled-Delay Active Queue Management algorithm
*
* Copyright (C) 2011-2012 Kathleen Nichols <nichols@pollere.com>
* Copyright (C) 2011-2012 Van Jacobson <van@pollere.net>
*
* Implemented on linux by :
* Copyright (C) 2012 Michael D. Taht <dave.taht@bufferbloat.net>
codel: add ce_threshold attribute For DCTCP or similar ECN based deployments on fabrics with shallow buffers, hosts are responsible for a good part of the buffering. This patch adds an optional ce_threshold to codel & fq_codel qdiscs, so that DCTCP can have feedback from queuing in the host. A DCTCP enabled egress port simply have a queue occupancy threshold above which ECT packets get CE mark. In codel language this translates to a sojourn time, so that one doesn't have to worry about bytes or bandwidth but delays. This makes the host an active participant in the health of the whole network. This also helps experimenting DCTCP in a setup without DCTCP compliant fabric. On following example, ce_threshold is set to 1ms, and we can see from 'ldelay xxx us' that TCP is not trying to go around the 5ms codel target. Queue has more capacity to absorb inelastic bursts (say from UDP traffic), as queues are maintained to an optimal level. lpaa23:~# ./tc -s -d qd sh dev eth1 qdisc mq 1: dev eth1 root Sent 87910654696 bytes 58065331 pkt (dropped 0, overlimits 0 requeues 42961) backlog 3108242b 364p requeues 42961 qdisc codel 8063: dev eth1 parent 1:1 limit 1000p target 5.0ms ce_threshold 1.0ms interval 100.0ms Sent 7363778701 bytes 4863809 pkt (dropped 0, overlimits 0 requeues 5503) rate 2348Mbit 193919pps backlog 255866b 46p requeues 5503 count 0 lastcount 0 ldelay 1.0ms drop_next 0us maxpacket 68130 ecn_mark 0 drop_overlimit 0 ce_mark 72384 qdisc codel 8064: dev eth1 parent 1:2 limit 1000p target 5.0ms ce_threshold 1.0ms interval 100.0ms Sent 7636486190 bytes 5043942 pkt (dropped 0, overlimits 0 requeues 5186) rate 2319Mbit 191538pps backlog 207418b 64p requeues 5186 count 0 lastcount 0 ldelay 694us drop_next 0us maxpacket 68130 ecn_mark 0 drop_overlimit 0 ce_mark 69873 qdisc codel 8065: dev eth1 parent 1:3 limit 1000p target 5.0ms ce_threshold 1.0ms interval 100.0ms Sent 11569360142 bytes 7641602 pkt (dropped 0, overlimits 0 requeues 5554) rate 3041Mbit 251096pps backlog 210446b 59p requeues 5554 count 0 lastcount 0 ldelay 889us drop_next 0us maxpacket 68130 ecn_mark 0 drop_overlimit 0 ce_mark 37780 ... Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Florian Westphal <fw@strlen.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Glenn Judd <glenn.judd@morganstanley.com> Cc: Nandita Dukkipati <nanditad@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09 06:05:12 +08:00
* Copyright (C) 2012,2015 Eric Dumazet <edumazet@google.com>
codel: Controlled Delay AQM An implementation of CoDel AQM, from Kathleen Nichols and Van Jacobson. http://queue.acm.org/detail.cfm?id=2209336 This AQM main input is no longer queue size in bytes or packets, but the delay packets stay in (FIFO) queue. As we don't have infinite memory, we still can drop packets in enqueue() in case of massive load, but mean of CoDel is to drop packets in dequeue(), using a control law based on two simple parameters : target : target sojourn time (default 5ms) interval : width of moving time window (default 100ms) Based on initial work from Dave Taht. Refactored to help future codel inclusion as a plugin for other linux qdisc (FQ_CODEL, ...), like RED. include/net/codel.h contains codel algorithm as close as possible than Kathleen reference. net/sched/sch_codel.c contains the linux qdisc specific glue. Separate structures permit a memory efficient implementation of fq_codel (to be sent as a separate work) : Each flow has its own struct codel_vars. timestamps are taken at enqueue() time with 1024 ns precision, allowing a range of 2199 seconds in queue, and 100Gb links support. iproute2 uses usec as base unit. Selected packets are dropped, unless ECN is enabled and packets can get ECN mark instead. Tested from 2Mb to 10Gb speeds with no particular problems, on ixgbe and tg3 drivers (BQL enabled). Usage: tc qdisc ... codel [ limit PACKETS ] [ target TIME ] [ interval TIME ] [ ecn ] qdisc codel 10: parent 1:1 limit 2000p target 3.0ms interval 60.0ms ecn Sent 13347099587 bytes 8815805 pkt (dropped 0, overlimits 0 requeues 0) rate 202365Kbit 16708pps backlog 113550b 75p requeues 0 count 116 lastcount 98 ldelay 4.3ms dropping drop_next 816us maxpacket 1514 ecn_mark 84399 drop_overlimit 0 CoDel must be seen as a base module, and should be used keeping in mind there is still a FIFO queue. So a typical setup will probably need a hierarchy of several qdiscs and packet classifiers to be able to meet whatever constraints a user might have. One possible example would be to use fq_codel, which combines Fair Queueing and CoDel, in replacement of sfq / sfq_red. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Dave Taht <dave.taht@bufferbloat.net> Cc: Kathleen Nichols <nichols@pollere.com> Cc: Van Jacobson <van@pollere.net> Cc: Tom Herbert <therbert@google.com> Cc: Matt Mathis <mattmathis@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-10 15:51:25 +08:00
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The names of the authors may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* Alternatively, provided that this notice is retained in full, this
* software may be distributed under the terms of the GNU General
* Public License ("GPL") version 2, in which case the provisions of the
* GPL apply INSTEAD OF those given above.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
* DAMAGE.
*
*/
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/skbuff.h>
#include <linux/prefetch.h>
codel: Controlled Delay AQM An implementation of CoDel AQM, from Kathleen Nichols and Van Jacobson. http://queue.acm.org/detail.cfm?id=2209336 This AQM main input is no longer queue size in bytes or packets, but the delay packets stay in (FIFO) queue. As we don't have infinite memory, we still can drop packets in enqueue() in case of massive load, but mean of CoDel is to drop packets in dequeue(), using a control law based on two simple parameters : target : target sojourn time (default 5ms) interval : width of moving time window (default 100ms) Based on initial work from Dave Taht. Refactored to help future codel inclusion as a plugin for other linux qdisc (FQ_CODEL, ...), like RED. include/net/codel.h contains codel algorithm as close as possible than Kathleen reference. net/sched/sch_codel.c contains the linux qdisc specific glue. Separate structures permit a memory efficient implementation of fq_codel (to be sent as a separate work) : Each flow has its own struct codel_vars. timestamps are taken at enqueue() time with 1024 ns precision, allowing a range of 2199 seconds in queue, and 100Gb links support. iproute2 uses usec as base unit. Selected packets are dropped, unless ECN is enabled and packets can get ECN mark instead. Tested from 2Mb to 10Gb speeds with no particular problems, on ixgbe and tg3 drivers (BQL enabled). Usage: tc qdisc ... codel [ limit PACKETS ] [ target TIME ] [ interval TIME ] [ ecn ] qdisc codel 10: parent 1:1 limit 2000p target 3.0ms interval 60.0ms ecn Sent 13347099587 bytes 8815805 pkt (dropped 0, overlimits 0 requeues 0) rate 202365Kbit 16708pps backlog 113550b 75p requeues 0 count 116 lastcount 98 ldelay 4.3ms dropping drop_next 816us maxpacket 1514 ecn_mark 84399 drop_overlimit 0 CoDel must be seen as a base module, and should be used keeping in mind there is still a FIFO queue. So a typical setup will probably need a hierarchy of several qdiscs and packet classifiers to be able to meet whatever constraints a user might have. One possible example would be to use fq_codel, which combines Fair Queueing and CoDel, in replacement of sfq / sfq_red. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Dave Taht <dave.taht@bufferbloat.net> Cc: Kathleen Nichols <nichols@pollere.com> Cc: Van Jacobson <van@pollere.net> Cc: Tom Herbert <therbert@google.com> Cc: Matt Mathis <mattmathis@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-10 15:51:25 +08:00
#include <net/pkt_sched.h>
#include <net/codel.h>
#define DEFAULT_CODEL_LIMIT 1000
struct codel_sched_data {
struct codel_params params;
struct codel_vars vars;
struct codel_stats stats;
u32 drop_overlimit;
};
/* This is the specific function called from codel_dequeue()
* to dequeue a packet from queue. Note: backlog is handled in
* codel, we dont need to reduce it here.
*/
static struct sk_buff *dequeue(struct codel_vars *vars, struct Qdisc *sch)
{
struct sk_buff *skb = __skb_dequeue(&sch->q);
prefetch(&skb->end); /* we'll need skb_shinfo() */
return skb;
}
static struct sk_buff *codel_qdisc_dequeue(struct Qdisc *sch)
{
struct codel_sched_data *q = qdisc_priv(sch);
struct sk_buff *skb;
skb = codel_dequeue(sch, &q->params, &q->vars, &q->stats, dequeue);
codel: Controlled Delay AQM An implementation of CoDel AQM, from Kathleen Nichols and Van Jacobson. http://queue.acm.org/detail.cfm?id=2209336 This AQM main input is no longer queue size in bytes or packets, but the delay packets stay in (FIFO) queue. As we don't have infinite memory, we still can drop packets in enqueue() in case of massive load, but mean of CoDel is to drop packets in dequeue(), using a control law based on two simple parameters : target : target sojourn time (default 5ms) interval : width of moving time window (default 100ms) Based on initial work from Dave Taht. Refactored to help future codel inclusion as a plugin for other linux qdisc (FQ_CODEL, ...), like RED. include/net/codel.h contains codel algorithm as close as possible than Kathleen reference. net/sched/sch_codel.c contains the linux qdisc specific glue. Separate structures permit a memory efficient implementation of fq_codel (to be sent as a separate work) : Each flow has its own struct codel_vars. timestamps are taken at enqueue() time with 1024 ns precision, allowing a range of 2199 seconds in queue, and 100Gb links support. iproute2 uses usec as base unit. Selected packets are dropped, unless ECN is enabled and packets can get ECN mark instead. Tested from 2Mb to 10Gb speeds with no particular problems, on ixgbe and tg3 drivers (BQL enabled). Usage: tc qdisc ... codel [ limit PACKETS ] [ target TIME ] [ interval TIME ] [ ecn ] qdisc codel 10: parent 1:1 limit 2000p target 3.0ms interval 60.0ms ecn Sent 13347099587 bytes 8815805 pkt (dropped 0, overlimits 0 requeues 0) rate 202365Kbit 16708pps backlog 113550b 75p requeues 0 count 116 lastcount 98 ldelay 4.3ms dropping drop_next 816us maxpacket 1514 ecn_mark 84399 drop_overlimit 0 CoDel must be seen as a base module, and should be used keeping in mind there is still a FIFO queue. So a typical setup will probably need a hierarchy of several qdiscs and packet classifiers to be able to meet whatever constraints a user might have. One possible example would be to use fq_codel, which combines Fair Queueing and CoDel, in replacement of sfq / sfq_red. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Dave Taht <dave.taht@bufferbloat.net> Cc: Kathleen Nichols <nichols@pollere.com> Cc: Van Jacobson <van@pollere.net> Cc: Tom Herbert <therbert@google.com> Cc: Matt Mathis <mattmathis@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-10 15:51:25 +08:00
/* We cant call qdisc_tree_decrease_qlen() if our qlen is 0,
* or HTB crashes. Defer it for next round.
*/
if (q->stats.drop_count && sch->q.qlen) {
qdisc_tree_decrease_qlen(sch, q->stats.drop_count);
q->stats.drop_count = 0;
}
if (skb)
qdisc_bstats_update(sch, skb);
return skb;
}
static int codel_qdisc_enqueue(struct sk_buff *skb, struct Qdisc *sch)
{
struct codel_sched_data *q;
if (likely(qdisc_qlen(sch) < sch->limit)) {
codel_set_enqueue_time(skb);
return qdisc_enqueue_tail(skb, sch);
}
q = qdisc_priv(sch);
q->drop_overlimit++;
return qdisc_drop(skb, sch);
}
static const struct nla_policy codel_policy[TCA_CODEL_MAX + 1] = {
[TCA_CODEL_TARGET] = { .type = NLA_U32 },
[TCA_CODEL_LIMIT] = { .type = NLA_U32 },
[TCA_CODEL_INTERVAL] = { .type = NLA_U32 },
[TCA_CODEL_ECN] = { .type = NLA_U32 },
codel: add ce_threshold attribute For DCTCP or similar ECN based deployments on fabrics with shallow buffers, hosts are responsible for a good part of the buffering. This patch adds an optional ce_threshold to codel & fq_codel qdiscs, so that DCTCP can have feedback from queuing in the host. A DCTCP enabled egress port simply have a queue occupancy threshold above which ECT packets get CE mark. In codel language this translates to a sojourn time, so that one doesn't have to worry about bytes or bandwidth but delays. This makes the host an active participant in the health of the whole network. This also helps experimenting DCTCP in a setup without DCTCP compliant fabric. On following example, ce_threshold is set to 1ms, and we can see from 'ldelay xxx us' that TCP is not trying to go around the 5ms codel target. Queue has more capacity to absorb inelastic bursts (say from UDP traffic), as queues are maintained to an optimal level. lpaa23:~# ./tc -s -d qd sh dev eth1 qdisc mq 1: dev eth1 root Sent 87910654696 bytes 58065331 pkt (dropped 0, overlimits 0 requeues 42961) backlog 3108242b 364p requeues 42961 qdisc codel 8063: dev eth1 parent 1:1 limit 1000p target 5.0ms ce_threshold 1.0ms interval 100.0ms Sent 7363778701 bytes 4863809 pkt (dropped 0, overlimits 0 requeues 5503) rate 2348Mbit 193919pps backlog 255866b 46p requeues 5503 count 0 lastcount 0 ldelay 1.0ms drop_next 0us maxpacket 68130 ecn_mark 0 drop_overlimit 0 ce_mark 72384 qdisc codel 8064: dev eth1 parent 1:2 limit 1000p target 5.0ms ce_threshold 1.0ms interval 100.0ms Sent 7636486190 bytes 5043942 pkt (dropped 0, overlimits 0 requeues 5186) rate 2319Mbit 191538pps backlog 207418b 64p requeues 5186 count 0 lastcount 0 ldelay 694us drop_next 0us maxpacket 68130 ecn_mark 0 drop_overlimit 0 ce_mark 69873 qdisc codel 8065: dev eth1 parent 1:3 limit 1000p target 5.0ms ce_threshold 1.0ms interval 100.0ms Sent 11569360142 bytes 7641602 pkt (dropped 0, overlimits 0 requeues 5554) rate 3041Mbit 251096pps backlog 210446b 59p requeues 5554 count 0 lastcount 0 ldelay 889us drop_next 0us maxpacket 68130 ecn_mark 0 drop_overlimit 0 ce_mark 37780 ... Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Florian Westphal <fw@strlen.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Glenn Judd <glenn.judd@morganstanley.com> Cc: Nandita Dukkipati <nanditad@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09 06:05:12 +08:00
[TCA_CODEL_CE_THRESHOLD]= { .type = NLA_U32 },
codel: Controlled Delay AQM An implementation of CoDel AQM, from Kathleen Nichols and Van Jacobson. http://queue.acm.org/detail.cfm?id=2209336 This AQM main input is no longer queue size in bytes or packets, but the delay packets stay in (FIFO) queue. As we don't have infinite memory, we still can drop packets in enqueue() in case of massive load, but mean of CoDel is to drop packets in dequeue(), using a control law based on two simple parameters : target : target sojourn time (default 5ms) interval : width of moving time window (default 100ms) Based on initial work from Dave Taht. Refactored to help future codel inclusion as a plugin for other linux qdisc (FQ_CODEL, ...), like RED. include/net/codel.h contains codel algorithm as close as possible than Kathleen reference. net/sched/sch_codel.c contains the linux qdisc specific glue. Separate structures permit a memory efficient implementation of fq_codel (to be sent as a separate work) : Each flow has its own struct codel_vars. timestamps are taken at enqueue() time with 1024 ns precision, allowing a range of 2199 seconds in queue, and 100Gb links support. iproute2 uses usec as base unit. Selected packets are dropped, unless ECN is enabled and packets can get ECN mark instead. Tested from 2Mb to 10Gb speeds with no particular problems, on ixgbe and tg3 drivers (BQL enabled). Usage: tc qdisc ... codel [ limit PACKETS ] [ target TIME ] [ interval TIME ] [ ecn ] qdisc codel 10: parent 1:1 limit 2000p target 3.0ms interval 60.0ms ecn Sent 13347099587 bytes 8815805 pkt (dropped 0, overlimits 0 requeues 0) rate 202365Kbit 16708pps backlog 113550b 75p requeues 0 count 116 lastcount 98 ldelay 4.3ms dropping drop_next 816us maxpacket 1514 ecn_mark 84399 drop_overlimit 0 CoDel must be seen as a base module, and should be used keeping in mind there is still a FIFO queue. So a typical setup will probably need a hierarchy of several qdiscs and packet classifiers to be able to meet whatever constraints a user might have. One possible example would be to use fq_codel, which combines Fair Queueing and CoDel, in replacement of sfq / sfq_red. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Dave Taht <dave.taht@bufferbloat.net> Cc: Kathleen Nichols <nichols@pollere.com> Cc: Van Jacobson <van@pollere.net> Cc: Tom Herbert <therbert@google.com> Cc: Matt Mathis <mattmathis@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-10 15:51:25 +08:00
};
static int codel_change(struct Qdisc *sch, struct nlattr *opt)
{
struct codel_sched_data *q = qdisc_priv(sch);
struct nlattr *tb[TCA_CODEL_MAX + 1];
unsigned int qlen;
int err;
if (!opt)
return -EINVAL;
err = nla_parse_nested(tb, TCA_CODEL_MAX, opt, codel_policy);
if (err < 0)
return err;
sch_tree_lock(sch);
if (tb[TCA_CODEL_TARGET]) {
u32 target = nla_get_u32(tb[TCA_CODEL_TARGET]);
q->params.target = ((u64)target * NSEC_PER_USEC) >> CODEL_SHIFT;
}
codel: add ce_threshold attribute For DCTCP or similar ECN based deployments on fabrics with shallow buffers, hosts are responsible for a good part of the buffering. This patch adds an optional ce_threshold to codel & fq_codel qdiscs, so that DCTCP can have feedback from queuing in the host. A DCTCP enabled egress port simply have a queue occupancy threshold above which ECT packets get CE mark. In codel language this translates to a sojourn time, so that one doesn't have to worry about bytes or bandwidth but delays. This makes the host an active participant in the health of the whole network. This also helps experimenting DCTCP in a setup without DCTCP compliant fabric. On following example, ce_threshold is set to 1ms, and we can see from 'ldelay xxx us' that TCP is not trying to go around the 5ms codel target. Queue has more capacity to absorb inelastic bursts (say from UDP traffic), as queues are maintained to an optimal level. lpaa23:~# ./tc -s -d qd sh dev eth1 qdisc mq 1: dev eth1 root Sent 87910654696 bytes 58065331 pkt (dropped 0, overlimits 0 requeues 42961) backlog 3108242b 364p requeues 42961 qdisc codel 8063: dev eth1 parent 1:1 limit 1000p target 5.0ms ce_threshold 1.0ms interval 100.0ms Sent 7363778701 bytes 4863809 pkt (dropped 0, overlimits 0 requeues 5503) rate 2348Mbit 193919pps backlog 255866b 46p requeues 5503 count 0 lastcount 0 ldelay 1.0ms drop_next 0us maxpacket 68130 ecn_mark 0 drop_overlimit 0 ce_mark 72384 qdisc codel 8064: dev eth1 parent 1:2 limit 1000p target 5.0ms ce_threshold 1.0ms interval 100.0ms Sent 7636486190 bytes 5043942 pkt (dropped 0, overlimits 0 requeues 5186) rate 2319Mbit 191538pps backlog 207418b 64p requeues 5186 count 0 lastcount 0 ldelay 694us drop_next 0us maxpacket 68130 ecn_mark 0 drop_overlimit 0 ce_mark 69873 qdisc codel 8065: dev eth1 parent 1:3 limit 1000p target 5.0ms ce_threshold 1.0ms interval 100.0ms Sent 11569360142 bytes 7641602 pkt (dropped 0, overlimits 0 requeues 5554) rate 3041Mbit 251096pps backlog 210446b 59p requeues 5554 count 0 lastcount 0 ldelay 889us drop_next 0us maxpacket 68130 ecn_mark 0 drop_overlimit 0 ce_mark 37780 ... Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Florian Westphal <fw@strlen.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Glenn Judd <glenn.judd@morganstanley.com> Cc: Nandita Dukkipati <nanditad@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09 06:05:12 +08:00
if (tb[TCA_CODEL_CE_THRESHOLD]) {
u64 val = nla_get_u32(tb[TCA_CODEL_CE_THRESHOLD]);
q->params.ce_threshold = (val * NSEC_PER_USEC) >> CODEL_SHIFT;
}
codel: Controlled Delay AQM An implementation of CoDel AQM, from Kathleen Nichols and Van Jacobson. http://queue.acm.org/detail.cfm?id=2209336 This AQM main input is no longer queue size in bytes or packets, but the delay packets stay in (FIFO) queue. As we don't have infinite memory, we still can drop packets in enqueue() in case of massive load, but mean of CoDel is to drop packets in dequeue(), using a control law based on two simple parameters : target : target sojourn time (default 5ms) interval : width of moving time window (default 100ms) Based on initial work from Dave Taht. Refactored to help future codel inclusion as a plugin for other linux qdisc (FQ_CODEL, ...), like RED. include/net/codel.h contains codel algorithm as close as possible than Kathleen reference. net/sched/sch_codel.c contains the linux qdisc specific glue. Separate structures permit a memory efficient implementation of fq_codel (to be sent as a separate work) : Each flow has its own struct codel_vars. timestamps are taken at enqueue() time with 1024 ns precision, allowing a range of 2199 seconds in queue, and 100Gb links support. iproute2 uses usec as base unit. Selected packets are dropped, unless ECN is enabled and packets can get ECN mark instead. Tested from 2Mb to 10Gb speeds with no particular problems, on ixgbe and tg3 drivers (BQL enabled). Usage: tc qdisc ... codel [ limit PACKETS ] [ target TIME ] [ interval TIME ] [ ecn ] qdisc codel 10: parent 1:1 limit 2000p target 3.0ms interval 60.0ms ecn Sent 13347099587 bytes 8815805 pkt (dropped 0, overlimits 0 requeues 0) rate 202365Kbit 16708pps backlog 113550b 75p requeues 0 count 116 lastcount 98 ldelay 4.3ms dropping drop_next 816us maxpacket 1514 ecn_mark 84399 drop_overlimit 0 CoDel must be seen as a base module, and should be used keeping in mind there is still a FIFO queue. So a typical setup will probably need a hierarchy of several qdiscs and packet classifiers to be able to meet whatever constraints a user might have. One possible example would be to use fq_codel, which combines Fair Queueing and CoDel, in replacement of sfq / sfq_red. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Dave Taht <dave.taht@bufferbloat.net> Cc: Kathleen Nichols <nichols@pollere.com> Cc: Van Jacobson <van@pollere.net> Cc: Tom Herbert <therbert@google.com> Cc: Matt Mathis <mattmathis@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-10 15:51:25 +08:00
if (tb[TCA_CODEL_INTERVAL]) {
u32 interval = nla_get_u32(tb[TCA_CODEL_INTERVAL]);
q->params.interval = ((u64)interval * NSEC_PER_USEC) >> CODEL_SHIFT;
}
if (tb[TCA_CODEL_LIMIT])
sch->limit = nla_get_u32(tb[TCA_CODEL_LIMIT]);
if (tb[TCA_CODEL_ECN])
q->params.ecn = !!nla_get_u32(tb[TCA_CODEL_ECN]);
qlen = sch->q.qlen;
while (sch->q.qlen > sch->limit) {
struct sk_buff *skb = __skb_dequeue(&sch->q);
qdisc_qstats_backlog_dec(sch, skb);
codel: Controlled Delay AQM An implementation of CoDel AQM, from Kathleen Nichols and Van Jacobson. http://queue.acm.org/detail.cfm?id=2209336 This AQM main input is no longer queue size in bytes or packets, but the delay packets stay in (FIFO) queue. As we don't have infinite memory, we still can drop packets in enqueue() in case of massive load, but mean of CoDel is to drop packets in dequeue(), using a control law based on two simple parameters : target : target sojourn time (default 5ms) interval : width of moving time window (default 100ms) Based on initial work from Dave Taht. Refactored to help future codel inclusion as a plugin for other linux qdisc (FQ_CODEL, ...), like RED. include/net/codel.h contains codel algorithm as close as possible than Kathleen reference. net/sched/sch_codel.c contains the linux qdisc specific glue. Separate structures permit a memory efficient implementation of fq_codel (to be sent as a separate work) : Each flow has its own struct codel_vars. timestamps are taken at enqueue() time with 1024 ns precision, allowing a range of 2199 seconds in queue, and 100Gb links support. iproute2 uses usec as base unit. Selected packets are dropped, unless ECN is enabled and packets can get ECN mark instead. Tested from 2Mb to 10Gb speeds with no particular problems, on ixgbe and tg3 drivers (BQL enabled). Usage: tc qdisc ... codel [ limit PACKETS ] [ target TIME ] [ interval TIME ] [ ecn ] qdisc codel 10: parent 1:1 limit 2000p target 3.0ms interval 60.0ms ecn Sent 13347099587 bytes 8815805 pkt (dropped 0, overlimits 0 requeues 0) rate 202365Kbit 16708pps backlog 113550b 75p requeues 0 count 116 lastcount 98 ldelay 4.3ms dropping drop_next 816us maxpacket 1514 ecn_mark 84399 drop_overlimit 0 CoDel must be seen as a base module, and should be used keeping in mind there is still a FIFO queue. So a typical setup will probably need a hierarchy of several qdiscs and packet classifiers to be able to meet whatever constraints a user might have. One possible example would be to use fq_codel, which combines Fair Queueing and CoDel, in replacement of sfq / sfq_red. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Dave Taht <dave.taht@bufferbloat.net> Cc: Kathleen Nichols <nichols@pollere.com> Cc: Van Jacobson <van@pollere.net> Cc: Tom Herbert <therbert@google.com> Cc: Matt Mathis <mattmathis@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-10 15:51:25 +08:00
qdisc_drop(skb, sch);
}
qdisc_tree_decrease_qlen(sch, qlen - sch->q.qlen);
sch_tree_unlock(sch);
return 0;
}
static int codel_init(struct Qdisc *sch, struct nlattr *opt)
{
struct codel_sched_data *q = qdisc_priv(sch);
sch->limit = DEFAULT_CODEL_LIMIT;
codel_params_init(&q->params, sch);
codel: Controlled Delay AQM An implementation of CoDel AQM, from Kathleen Nichols and Van Jacobson. http://queue.acm.org/detail.cfm?id=2209336 This AQM main input is no longer queue size in bytes or packets, but the delay packets stay in (FIFO) queue. As we don't have infinite memory, we still can drop packets in enqueue() in case of massive load, but mean of CoDel is to drop packets in dequeue(), using a control law based on two simple parameters : target : target sojourn time (default 5ms) interval : width of moving time window (default 100ms) Based on initial work from Dave Taht. Refactored to help future codel inclusion as a plugin for other linux qdisc (FQ_CODEL, ...), like RED. include/net/codel.h contains codel algorithm as close as possible than Kathleen reference. net/sched/sch_codel.c contains the linux qdisc specific glue. Separate structures permit a memory efficient implementation of fq_codel (to be sent as a separate work) : Each flow has its own struct codel_vars. timestamps are taken at enqueue() time with 1024 ns precision, allowing a range of 2199 seconds in queue, and 100Gb links support. iproute2 uses usec as base unit. Selected packets are dropped, unless ECN is enabled and packets can get ECN mark instead. Tested from 2Mb to 10Gb speeds with no particular problems, on ixgbe and tg3 drivers (BQL enabled). Usage: tc qdisc ... codel [ limit PACKETS ] [ target TIME ] [ interval TIME ] [ ecn ] qdisc codel 10: parent 1:1 limit 2000p target 3.0ms interval 60.0ms ecn Sent 13347099587 bytes 8815805 pkt (dropped 0, overlimits 0 requeues 0) rate 202365Kbit 16708pps backlog 113550b 75p requeues 0 count 116 lastcount 98 ldelay 4.3ms dropping drop_next 816us maxpacket 1514 ecn_mark 84399 drop_overlimit 0 CoDel must be seen as a base module, and should be used keeping in mind there is still a FIFO queue. So a typical setup will probably need a hierarchy of several qdiscs and packet classifiers to be able to meet whatever constraints a user might have. One possible example would be to use fq_codel, which combines Fair Queueing and CoDel, in replacement of sfq / sfq_red. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Dave Taht <dave.taht@bufferbloat.net> Cc: Kathleen Nichols <nichols@pollere.com> Cc: Van Jacobson <van@pollere.net> Cc: Tom Herbert <therbert@google.com> Cc: Matt Mathis <mattmathis@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-10 15:51:25 +08:00
codel_vars_init(&q->vars);
codel_stats_init(&q->stats);
if (opt) {
int err = codel_change(sch, opt);
if (err)
return err;
}
if (sch->limit >= 1)
sch->flags |= TCQ_F_CAN_BYPASS;
else
sch->flags &= ~TCQ_F_CAN_BYPASS;
return 0;
}
static int codel_dump(struct Qdisc *sch, struct sk_buff *skb)
{
struct codel_sched_data *q = qdisc_priv(sch);
struct nlattr *opts;
opts = nla_nest_start(skb, TCA_OPTIONS);
if (opts == NULL)
goto nla_put_failure;
if (nla_put_u32(skb, TCA_CODEL_TARGET,
codel_time_to_us(q->params.target)) ||
nla_put_u32(skb, TCA_CODEL_LIMIT,
sch->limit) ||
nla_put_u32(skb, TCA_CODEL_INTERVAL,
codel_time_to_us(q->params.interval)) ||
nla_put_u32(skb, TCA_CODEL_ECN,
q->params.ecn))
goto nla_put_failure;
codel: add ce_threshold attribute For DCTCP or similar ECN based deployments on fabrics with shallow buffers, hosts are responsible for a good part of the buffering. This patch adds an optional ce_threshold to codel & fq_codel qdiscs, so that DCTCP can have feedback from queuing in the host. A DCTCP enabled egress port simply have a queue occupancy threshold above which ECT packets get CE mark. In codel language this translates to a sojourn time, so that one doesn't have to worry about bytes or bandwidth but delays. This makes the host an active participant in the health of the whole network. This also helps experimenting DCTCP in a setup without DCTCP compliant fabric. On following example, ce_threshold is set to 1ms, and we can see from 'ldelay xxx us' that TCP is not trying to go around the 5ms codel target. Queue has more capacity to absorb inelastic bursts (say from UDP traffic), as queues are maintained to an optimal level. lpaa23:~# ./tc -s -d qd sh dev eth1 qdisc mq 1: dev eth1 root Sent 87910654696 bytes 58065331 pkt (dropped 0, overlimits 0 requeues 42961) backlog 3108242b 364p requeues 42961 qdisc codel 8063: dev eth1 parent 1:1 limit 1000p target 5.0ms ce_threshold 1.0ms interval 100.0ms Sent 7363778701 bytes 4863809 pkt (dropped 0, overlimits 0 requeues 5503) rate 2348Mbit 193919pps backlog 255866b 46p requeues 5503 count 0 lastcount 0 ldelay 1.0ms drop_next 0us maxpacket 68130 ecn_mark 0 drop_overlimit 0 ce_mark 72384 qdisc codel 8064: dev eth1 parent 1:2 limit 1000p target 5.0ms ce_threshold 1.0ms interval 100.0ms Sent 7636486190 bytes 5043942 pkt (dropped 0, overlimits 0 requeues 5186) rate 2319Mbit 191538pps backlog 207418b 64p requeues 5186 count 0 lastcount 0 ldelay 694us drop_next 0us maxpacket 68130 ecn_mark 0 drop_overlimit 0 ce_mark 69873 qdisc codel 8065: dev eth1 parent 1:3 limit 1000p target 5.0ms ce_threshold 1.0ms interval 100.0ms Sent 11569360142 bytes 7641602 pkt (dropped 0, overlimits 0 requeues 5554) rate 3041Mbit 251096pps backlog 210446b 59p requeues 5554 count 0 lastcount 0 ldelay 889us drop_next 0us maxpacket 68130 ecn_mark 0 drop_overlimit 0 ce_mark 37780 ... Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Florian Westphal <fw@strlen.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Glenn Judd <glenn.judd@morganstanley.com> Cc: Nandita Dukkipati <nanditad@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09 06:05:12 +08:00
if (q->params.ce_threshold != CODEL_DISABLED_THRESHOLD &&
nla_put_u32(skb, TCA_CODEL_CE_THRESHOLD,
codel_time_to_us(q->params.ce_threshold)))
goto nla_put_failure;
codel: Controlled Delay AQM An implementation of CoDel AQM, from Kathleen Nichols and Van Jacobson. http://queue.acm.org/detail.cfm?id=2209336 This AQM main input is no longer queue size in bytes or packets, but the delay packets stay in (FIFO) queue. As we don't have infinite memory, we still can drop packets in enqueue() in case of massive load, but mean of CoDel is to drop packets in dequeue(), using a control law based on two simple parameters : target : target sojourn time (default 5ms) interval : width of moving time window (default 100ms) Based on initial work from Dave Taht. Refactored to help future codel inclusion as a plugin for other linux qdisc (FQ_CODEL, ...), like RED. include/net/codel.h contains codel algorithm as close as possible than Kathleen reference. net/sched/sch_codel.c contains the linux qdisc specific glue. Separate structures permit a memory efficient implementation of fq_codel (to be sent as a separate work) : Each flow has its own struct codel_vars. timestamps are taken at enqueue() time with 1024 ns precision, allowing a range of 2199 seconds in queue, and 100Gb links support. iproute2 uses usec as base unit. Selected packets are dropped, unless ECN is enabled and packets can get ECN mark instead. Tested from 2Mb to 10Gb speeds with no particular problems, on ixgbe and tg3 drivers (BQL enabled). Usage: tc qdisc ... codel [ limit PACKETS ] [ target TIME ] [ interval TIME ] [ ecn ] qdisc codel 10: parent 1:1 limit 2000p target 3.0ms interval 60.0ms ecn Sent 13347099587 bytes 8815805 pkt (dropped 0, overlimits 0 requeues 0) rate 202365Kbit 16708pps backlog 113550b 75p requeues 0 count 116 lastcount 98 ldelay 4.3ms dropping drop_next 816us maxpacket 1514 ecn_mark 84399 drop_overlimit 0 CoDel must be seen as a base module, and should be used keeping in mind there is still a FIFO queue. So a typical setup will probably need a hierarchy of several qdiscs and packet classifiers to be able to meet whatever constraints a user might have. One possible example would be to use fq_codel, which combines Fair Queueing and CoDel, in replacement of sfq / sfq_red. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Dave Taht <dave.taht@bufferbloat.net> Cc: Kathleen Nichols <nichols@pollere.com> Cc: Van Jacobson <van@pollere.net> Cc: Tom Herbert <therbert@google.com> Cc: Matt Mathis <mattmathis@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-10 15:51:25 +08:00
return nla_nest_end(skb, opts);
nla_put_failure:
nla_nest_cancel(skb, opts);
return -1;
}
static int codel_dump_stats(struct Qdisc *sch, struct gnet_dump *d)
{
const struct codel_sched_data *q = qdisc_priv(sch);
struct tc_codel_xstats st = {
.maxpacket = q->stats.maxpacket,
.count = q->vars.count,
.lastcount = q->vars.lastcount,
.drop_overlimit = q->drop_overlimit,
.ldelay = codel_time_to_us(q->vars.ldelay),
.dropping = q->vars.dropping,
.ecn_mark = q->stats.ecn_mark,
codel: add ce_threshold attribute For DCTCP or similar ECN based deployments on fabrics with shallow buffers, hosts are responsible for a good part of the buffering. This patch adds an optional ce_threshold to codel & fq_codel qdiscs, so that DCTCP can have feedback from queuing in the host. A DCTCP enabled egress port simply have a queue occupancy threshold above which ECT packets get CE mark. In codel language this translates to a sojourn time, so that one doesn't have to worry about bytes or bandwidth but delays. This makes the host an active participant in the health of the whole network. This also helps experimenting DCTCP in a setup without DCTCP compliant fabric. On following example, ce_threshold is set to 1ms, and we can see from 'ldelay xxx us' that TCP is not trying to go around the 5ms codel target. Queue has more capacity to absorb inelastic bursts (say from UDP traffic), as queues are maintained to an optimal level. lpaa23:~# ./tc -s -d qd sh dev eth1 qdisc mq 1: dev eth1 root Sent 87910654696 bytes 58065331 pkt (dropped 0, overlimits 0 requeues 42961) backlog 3108242b 364p requeues 42961 qdisc codel 8063: dev eth1 parent 1:1 limit 1000p target 5.0ms ce_threshold 1.0ms interval 100.0ms Sent 7363778701 bytes 4863809 pkt (dropped 0, overlimits 0 requeues 5503) rate 2348Mbit 193919pps backlog 255866b 46p requeues 5503 count 0 lastcount 0 ldelay 1.0ms drop_next 0us maxpacket 68130 ecn_mark 0 drop_overlimit 0 ce_mark 72384 qdisc codel 8064: dev eth1 parent 1:2 limit 1000p target 5.0ms ce_threshold 1.0ms interval 100.0ms Sent 7636486190 bytes 5043942 pkt (dropped 0, overlimits 0 requeues 5186) rate 2319Mbit 191538pps backlog 207418b 64p requeues 5186 count 0 lastcount 0 ldelay 694us drop_next 0us maxpacket 68130 ecn_mark 0 drop_overlimit 0 ce_mark 69873 qdisc codel 8065: dev eth1 parent 1:3 limit 1000p target 5.0ms ce_threshold 1.0ms interval 100.0ms Sent 11569360142 bytes 7641602 pkt (dropped 0, overlimits 0 requeues 5554) rate 3041Mbit 251096pps backlog 210446b 59p requeues 5554 count 0 lastcount 0 ldelay 889us drop_next 0us maxpacket 68130 ecn_mark 0 drop_overlimit 0 ce_mark 37780 ... Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Florian Westphal <fw@strlen.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Glenn Judd <glenn.judd@morganstanley.com> Cc: Nandita Dukkipati <nanditad@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09 06:05:12 +08:00
.ce_mark = q->stats.ce_mark,
codel: Controlled Delay AQM An implementation of CoDel AQM, from Kathleen Nichols and Van Jacobson. http://queue.acm.org/detail.cfm?id=2209336 This AQM main input is no longer queue size in bytes or packets, but the delay packets stay in (FIFO) queue. As we don't have infinite memory, we still can drop packets in enqueue() in case of massive load, but mean of CoDel is to drop packets in dequeue(), using a control law based on two simple parameters : target : target sojourn time (default 5ms) interval : width of moving time window (default 100ms) Based on initial work from Dave Taht. Refactored to help future codel inclusion as a plugin for other linux qdisc (FQ_CODEL, ...), like RED. include/net/codel.h contains codel algorithm as close as possible than Kathleen reference. net/sched/sch_codel.c contains the linux qdisc specific glue. Separate structures permit a memory efficient implementation of fq_codel (to be sent as a separate work) : Each flow has its own struct codel_vars. timestamps are taken at enqueue() time with 1024 ns precision, allowing a range of 2199 seconds in queue, and 100Gb links support. iproute2 uses usec as base unit. Selected packets are dropped, unless ECN is enabled and packets can get ECN mark instead. Tested from 2Mb to 10Gb speeds with no particular problems, on ixgbe and tg3 drivers (BQL enabled). Usage: tc qdisc ... codel [ limit PACKETS ] [ target TIME ] [ interval TIME ] [ ecn ] qdisc codel 10: parent 1:1 limit 2000p target 3.0ms interval 60.0ms ecn Sent 13347099587 bytes 8815805 pkt (dropped 0, overlimits 0 requeues 0) rate 202365Kbit 16708pps backlog 113550b 75p requeues 0 count 116 lastcount 98 ldelay 4.3ms dropping drop_next 816us maxpacket 1514 ecn_mark 84399 drop_overlimit 0 CoDel must be seen as a base module, and should be used keeping in mind there is still a FIFO queue. So a typical setup will probably need a hierarchy of several qdiscs and packet classifiers to be able to meet whatever constraints a user might have. One possible example would be to use fq_codel, which combines Fair Queueing and CoDel, in replacement of sfq / sfq_red. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Dave Taht <dave.taht@bufferbloat.net> Cc: Kathleen Nichols <nichols@pollere.com> Cc: Van Jacobson <van@pollere.net> Cc: Tom Herbert <therbert@google.com> Cc: Matt Mathis <mattmathis@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-10 15:51:25 +08:00
};
if (q->vars.dropping) {
codel_tdiff_t delta = q->vars.drop_next - codel_get_time();
if (delta >= 0)
st.drop_next = codel_time_to_us(delta);
else
st.drop_next = -codel_time_to_us(-delta);
}
return gnet_stats_copy_app(d, &st, sizeof(st));
}
static void codel_reset(struct Qdisc *sch)
{
struct codel_sched_data *q = qdisc_priv(sch);
qdisc_reset_queue(sch);
codel_vars_init(&q->vars);
}
static struct Qdisc_ops codel_qdisc_ops __read_mostly = {
.id = "codel",
.priv_size = sizeof(struct codel_sched_data),
.enqueue = codel_qdisc_enqueue,
.dequeue = codel_qdisc_dequeue,
.peek = qdisc_peek_dequeued,
.init = codel_init,
.reset = codel_reset,
.change = codel_change,
.dump = codel_dump,
.dump_stats = codel_dump_stats,
.owner = THIS_MODULE,
};
static int __init codel_module_init(void)
{
return register_qdisc(&codel_qdisc_ops);
}
static void __exit codel_module_exit(void)
{
unregister_qdisc(&codel_qdisc_ops);
}
module_init(codel_module_init)
module_exit(codel_module_exit)
MODULE_DESCRIPTION("Controlled Delay queue discipline");
MODULE_AUTHOR("Dave Taht");
MODULE_AUTHOR("Eric Dumazet");
MODULE_LICENSE("Dual BSD/GPL");