linux-sg2042/include/linux/nubus.h

189 lines
5.5 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
/* SPDX-License-Identifier: GPL-2.0 */
/*
nubus.h: various definitions and prototypes for NuBus drivers to use.
Originally written by Alan Cox.
Hacked to death by C. Scott Ananian and David Huggins-Daines.
*/
#ifndef LINUX_NUBUS_H
#define LINUX_NUBUS_H
#include <linux/device.h>
#include <asm/nubus.h>
#include <uapi/linux/nubus.h>
struct proc_dir_entry;
struct seq_file;
struct nubus_dir {
unsigned char *base;
unsigned char *ptr;
int done;
int mask;
struct proc_dir_entry *procdir;
};
struct nubus_dirent {
unsigned char *base;
unsigned char type;
__u32 data; /* Actually 24 bits used */
int mask;
};
struct nubus_board {
struct device dev;
/* Only 9-E actually exist, though 0-8 are also theoretically
possible, and 0 is a special case which represents the
motherboard and onboard peripherals (Ethernet, video) */
int slot;
/* For slot 0, this is bogus. */
char name[64];
/* Format block */
unsigned char *fblock;
/* Root directory (does *not* always equal fblock + doffset!) */
unsigned char *directory;
unsigned long slot_addr;
/* Offset to root directory (sometimes) */
unsigned long doffset;
/* Length over which to compute the crc */
unsigned long rom_length;
/* Completely useless most of the time */
unsigned long crc;
unsigned char rev;
unsigned char format;
unsigned char lanes;
nubus: Call proc_mkdir() not more than once per slot directory This patch fixes the following WARNING. proc_dir_entry 'nubus/a' already registered Modules linked in: CPU: 0 PID: 1 Comm: swapper Tainted: G W 4.13.0-00036-gd57552077387 #1 Stack from 01c1bd9c: 01c1bd9c 003c2c8b 01c1bdc0 0001b0fe 00000000 00322f4a 01c43a20 01c43b0c 01c8c420 01c1bde8 0001b1b8 003a4ac3 00000148 000faa26 00000009 00000000 01c1bde0 003a4b6c 01c1bdfc 01c1be20 000faa26 003a4ac3 00000148 003a4b6c 01c43a71 01c8c471 01c10000 00326430 0043d00c 00000005 01c71a00 0020bce0 00322964 01c1be38 000fac04 01c43a20 01c8c420 01c1bee0 01c8c420 01c1be50 000fac4c 01c1bee0 00000000 01c43a20 00000000 01c1bee8 0020bd26 01c1bee0 Call Trace: [<0001b0fe>] __warn+0xae/0xde [<00322f4a>] memcmp+0x0/0x5c [<0001b1b8>] warn_slowpath_fmt+0x2e/0x36 [<000faa26>] proc_register+0xbe/0xd8 [<000faa26>] proc_register+0xbe/0xd8 [<00326430>] sprintf+0x0/0x20 [<0020bce0>] nubus_proc_attach_device+0x0/0x1b8 [<00322964>] strcpy+0x0/0x22 [<000fac04>] proc_mkdir_data+0x64/0x96 [<000fac4c>] proc_mkdir+0x16/0x1c [<0020bd26>] nubus_proc_attach_device+0x46/0x1b8 [<0020bce0>] nubus_proc_attach_device+0x0/0x1b8 [<00322964>] strcpy+0x0/0x22 [<00001ba6>] kernel_pg_dir+0xba6/0x1000 [<004339a2>] proc_bus_nubus_add_devices+0x1a/0x2e [<000faa40>] proc_create_data+0x0/0xf2 [<0003297c>] parse_args+0x0/0x2d4 [<00433a08>] nubus_proc_init+0x52/0x5a [<00433944>] nubus_init+0x0/0x44 [<00433982>] nubus_init+0x3e/0x44 [<000020dc>] do_one_initcall+0x38/0x196 [<000020a4>] do_one_initcall+0x0/0x196 [<0003297c>] parse_args+0x0/0x2d4 [<00322964>] strcpy+0x0/0x22 [<00040004>] __up_read+0xe/0x40 [<004231d4>] repair_env_string+0x0/0x7a [<0042312e>] kernel_init_freeable+0xee/0x194 [<00423146>] kernel_init_freeable+0x106/0x194 [<00433944>] nubus_init+0x0/0x44 [<000a6000>] kfree+0x0/0x156 [<0032768c>] kernel_init+0x0/0xda [<00327698>] kernel_init+0xc/0xda [<0032768c>] kernel_init+0x0/0xda [<00002a90>] ret_from_kernel_thread+0xc/0x14 ---[ end trace 14a6d619908ea253 ]--- ------------[ cut here ]------------ This gets repeated with each additional functional reasource. The problem here is the call to proc_mkdir() when the directory already exists. Each nubus_board gets a directory, such as /proc/bus/nubus/s/ where s is the hex slot number. Therefore, store the 'procdir' pointer in struct nubus_board instead of struct nubus_dev. Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2018-01-14 06:37:13 +08:00
/* Directory entry in /proc/bus/nubus */
struct proc_dir_entry *procdir;
};
struct nubus_rsrc {
struct list_head list;
/* The functional resource ID */
unsigned char resid;
/* These are mostly here for convenience; we could always read
them from the ROMs if we wanted to */
unsigned short category;
unsigned short type;
unsigned short dr_sw;
unsigned short dr_hw;
/* Functional directory */
unsigned char *directory;
/* Much of our info comes from here */
struct nubus_board *board;
};
/* This is all NuBus functional resources (used to find devices later on) */
extern struct list_head nubus_func_rsrcs;
struct nubus_driver {
struct device_driver driver;
int (*probe)(struct nubus_board *board);
int (*remove)(struct nubus_board *board);
};
extern struct bus_type nubus_bus_type;
/* Generic NuBus interface functions, modelled after the PCI interface */
#ifdef CONFIG_PROC_FS
void nubus_proc_init(void);
struct proc_dir_entry *nubus_proc_add_board(struct nubus_board *board);
struct proc_dir_entry *nubus_proc_add_rsrc_dir(struct proc_dir_entry *procdir,
const struct nubus_dirent *ent,
struct nubus_board *board);
void nubus_proc_add_rsrc_mem(struct proc_dir_entry *procdir,
const struct nubus_dirent *ent,
unsigned int size);
void nubus_proc_add_rsrc(struct proc_dir_entry *procdir,
const struct nubus_dirent *ent);
#else
static inline void nubus_proc_init(void) {}
static inline
struct proc_dir_entry *nubus_proc_add_board(struct nubus_board *board)
{ return NULL; }
static inline
struct proc_dir_entry *nubus_proc_add_rsrc_dir(struct proc_dir_entry *procdir,
const struct nubus_dirent *ent,
struct nubus_board *board)
{ return NULL; }
static inline void nubus_proc_add_rsrc_mem(struct proc_dir_entry *procdir,
const struct nubus_dirent *ent,
unsigned int size) {}
static inline void nubus_proc_add_rsrc(struct proc_dir_entry *procdir,
const struct nubus_dirent *ent) {}
#endif
struct nubus_rsrc *nubus_first_rsrc_or_null(void);
struct nubus_rsrc *nubus_next_rsrc_or_null(struct nubus_rsrc *from);
#define for_each_func_rsrc(f) \
for (f = nubus_first_rsrc_or_null(); f; f = nubus_next_rsrc_or_null(f))
#define for_each_board_func_rsrc(b, f) \
for_each_func_rsrc(f) if (f->board != b) {} else
/* These are somewhat more NuBus-specific. They all return 0 for
success and -1 for failure, as you'd expect. */
/* The root directory which contains the board and functional
directories */
int nubus_get_root_dir(const struct nubus_board *board,
struct nubus_dir *dir);
/* The board directory */
int nubus_get_board_dir(const struct nubus_board *board,
struct nubus_dir *dir);
/* The functional directory */
int nubus_get_func_dir(const struct nubus_rsrc *fres, struct nubus_dir *dir);
/* These work on any directory gotten via the above */
int nubus_readdir(struct nubus_dir *dir,
struct nubus_dirent *ent);
int nubus_find_rsrc(struct nubus_dir *dir,
unsigned char rsrc_type,
struct nubus_dirent *ent);
int nubus_rewinddir(struct nubus_dir *dir);
/* Things to do with directory entries */
int nubus_get_subdir(const struct nubus_dirent *ent,
struct nubus_dir *dir);
void nubus_get_rsrc_mem(void *dest, const struct nubus_dirent *dirent,
unsigned int len);
unsigned int nubus_get_rsrc_str(char *dest, const struct nubus_dirent *dirent,
unsigned int len);
void nubus_seq_write_rsrc_mem(struct seq_file *m,
const struct nubus_dirent *dirent,
unsigned int len);
unsigned char *nubus_dirptr(const struct nubus_dirent *nd);
/* Declarations relating to driver model objects */
int nubus_parent_device_register(void);
int nubus_device_register(struct nubus_board *board);
int nubus_driver_register(struct nubus_driver *ndrv);
void nubus_driver_unregister(struct nubus_driver *ndrv);
int nubus_proc_show(struct seq_file *m, void *data);
static inline void nubus_set_drvdata(struct nubus_board *board, void *data)
{
dev_set_drvdata(&board->dev, data);
}
static inline void *nubus_get_drvdata(struct nubus_board *board)
{
return dev_get_drvdata(&board->dev);
}
/* Returns a pointer to the "standard" slot space. */
static inline void *nubus_slot_addr(int slot)
{
return (void *)(0xF0000000 | (slot << 24));
}
#endif /* LINUX_NUBUS_H */