linux-sg2042/drivers/gpu/drm/i915/intel_uc.h

234 lines
7.8 KiB
C
Raw Normal View History

/*
* Copyright © 2014 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*
*/
#ifndef _INTEL_UC_H_
#define _INTEL_UC_H_
#include "intel_guc_fwif.h"
#include "i915_guc_reg.h"
#include "intel_ringbuffer.h"
#include "i915_vma.h"
struct drm_i915_gem_request;
/*
* This structure primarily describes the GEM object shared with the GuC.
* The GEM object is held for the entire lifetime of our interaction with
* the GuC, being allocated before the GuC is loaded with its firmware.
* Because there's no way to update the address used by the GuC after
* initialisation, the shared object must stay pinned into the GGTT as
* long as the GuC is in use. We also keep the first page (only) mapped
* into kernel address space, as it includes shared data that must be
* updated on every request submission.
*
* The single GEM object described here is actually made up of several
* separate areas, as far as the GuC is concerned. The first page (kept
* kmap'd) includes the "process decriptor" which holds sequence data for
* the doorbell, and one cacheline which actually *is* the doorbell; a
* write to this will "ring the doorbell" (i.e. send an interrupt to the
* GuC). The subsequent pages of the client object constitute the work
* queue (a circular array of work items), again described in the process
* descriptor. Work queue pages are mapped momentarily as required.
*
* We also keep a few statistics on failures. Ideally, these should all
* be zero!
* no_wq_space: times that the submission pre-check found no space was
* available in the work queue (note, the queue is shared,
* not per-engine). It is OK for this to be nonzero, but
* it should not be huge!
* q_fail: failed to enqueue a work item. This should never happen,
* because we check for space beforehand.
* b_fail: failed to ring the doorbell. This should never happen, unless
* somehow the hardware misbehaves, or maybe if the GuC firmware
* crashes? We probably need to reset the GPU to recover.
* retcode: errno from last guc_submit()
*/
struct i915_guc_client {
struct i915_vma *vma;
void *vaddr;
struct i915_gem_context *owner;
struct intel_guc *guc;
uint32_t engines; /* bitmap of (host) engine ids */
uint32_t priority;
uint32_t ctx_index;
uint32_t proc_desc_offset;
uint32_t doorbell_offset;
uint32_t doorbell_cookie;
uint16_t doorbell_id;
uint16_t padding[3]; /* Maintain alignment */
spinlock_t wq_lock;
uint32_t wq_offset;
uint32_t wq_size;
uint32_t wq_tail;
uint32_t wq_rsvd;
uint32_t no_wq_space;
uint32_t b_fail;
int retcode;
/* Per-engine counts of GuC submissions */
uint64_t submissions[I915_NUM_ENGINES];
};
drm/i915/guc: Make the GuC fw loading helper functions general Rename some of the GuC fw loading code to make them more general. We will utilise them for HuC loading as well. s/intel_guc_fw/intel_uc_fw/g s/GUC_FIRMWARE/INTEL_UC_FIRMWARE/g Struct intel_guc_fw is renamed to intel_uc_fw. Prefix of tts members, such as 'guc' or 'guc_fw' either is renamed to 'uc' or removed for same purpose. v2: rebased on top of nightly. reapplied the search/replace as upstream code as changed. v3: removed G from messages in shared fw fetch function. v4: rebased.Updated dev to dev_priv in intel_guc_setup(), guc_fw_getch() and intel_guc_init(). v5: rebased. Remove uint32_t fw_type to patch 2. Add INTEL_ prefix for fields in enum intel_uc_fw_status. Remove uc_dev field since its never used.Rename uc_fw to just fw and guc_fw to fw to avoid redundency. v6: rebased. Remove sections of code that were commented and no longer required. v7: rebased. Remove uc_fw_ prefix from path and obj fields in intel_uc_fw struct as suggested by Michal. v8: rebased. Add declaration of intel_guc_wopcm_size() in this patch instead of patch 3. Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Alex Dai <yu.dai@intel.com> Signed-off-by: Peter Antoine <peter.antoine@intel.com> Reviewed-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1484356631-16139-2-git-send-email-anusha.srivatsa@intel.com
2017-01-14 09:17:04 +08:00
enum intel_uc_fw_status {
INTEL_UC_FIRMWARE_FAIL = -1,
INTEL_UC_FIRMWARE_NONE = 0,
INTEL_UC_FIRMWARE_PENDING,
INTEL_UC_FIRMWARE_SUCCESS
};
enum intel_uc_fw_type {
INTEL_UC_FW_TYPE_GUC,
INTEL_UC_FW_TYPE_HUC
};
/*
* This structure encapsulates all the data needed during the process
* of fetching, caching, and loading the firmware image into the GuC.
*/
drm/i915/guc: Make the GuC fw loading helper functions general Rename some of the GuC fw loading code to make them more general. We will utilise them for HuC loading as well. s/intel_guc_fw/intel_uc_fw/g s/GUC_FIRMWARE/INTEL_UC_FIRMWARE/g Struct intel_guc_fw is renamed to intel_uc_fw. Prefix of tts members, such as 'guc' or 'guc_fw' either is renamed to 'uc' or removed for same purpose. v2: rebased on top of nightly. reapplied the search/replace as upstream code as changed. v3: removed G from messages in shared fw fetch function. v4: rebased.Updated dev to dev_priv in intel_guc_setup(), guc_fw_getch() and intel_guc_init(). v5: rebased. Remove uint32_t fw_type to patch 2. Add INTEL_ prefix for fields in enum intel_uc_fw_status. Remove uc_dev field since its never used.Rename uc_fw to just fw and guc_fw to fw to avoid redundency. v6: rebased. Remove sections of code that were commented and no longer required. v7: rebased. Remove uc_fw_ prefix from path and obj fields in intel_uc_fw struct as suggested by Michal. v8: rebased. Add declaration of intel_guc_wopcm_size() in this patch instead of patch 3. Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Alex Dai <yu.dai@intel.com> Signed-off-by: Peter Antoine <peter.antoine@intel.com> Reviewed-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1484356631-16139-2-git-send-email-anusha.srivatsa@intel.com
2017-01-14 09:17:04 +08:00
struct intel_uc_fw {
const char *path;
size_t size;
struct drm_i915_gem_object *obj;
enum intel_uc_fw_status fetch_status;
enum intel_uc_fw_status load_status;
uint16_t major_ver_wanted;
uint16_t minor_ver_wanted;
uint16_t major_ver_found;
uint16_t minor_ver_found;
enum intel_uc_fw_type fw;
uint32_t header_size;
uint32_t header_offset;
uint32_t rsa_size;
uint32_t rsa_offset;
uint32_t ucode_size;
uint32_t ucode_offset;
};
struct intel_guc_log {
uint32_t flags;
struct i915_vma *vma;
drm/i915: Handle log buffer flush interrupt event from GuC GuC ukernel sends an interrupt to Host to flush the log buffer and expects Host to correspondingly update the read pointer information in the state structure, once it has consumed the log buffer contents by copying them to a file or buffer. Even if Host couldn't copy the contents, it can still update the read pointer so that logging state is not disturbed on GuC side. v2: - Use a dedicated workqueue for handling flush interrupt. (Tvrtko) - Reduce the overall log buffer copying time by skipping the copy of crash buffer area for regular cases and copying only the state structure data in first page. v3: - Create a vmalloc mapping of log buffer. (Chris) - Cover the flush acknowledgment under rpm get & put.(Chris) - Revert the change of skipping the copy of crash dump area, as not really needed, will be covered by subsequent patch. v4: - Destroy the wq under the same condition in which it was created, pass dev_piv pointer instead of dev to newly added GuC function, add more comments & rename variable for clarity. (Tvrtko) v5: - Allocate & destroy the dedicated wq, for handling flush interrupt, from the setup/teardown routines of GuC logging. (Chris) - Validate the log buffer size value retrieved from state structure and do some minor cleanup. (Tvrtko) - Fix error/warnings reported by checkpatch. (Tvrtko) - Rebase. v6: - Remove the interrupts_enabled check from guc_capture_logs_work, need to process that last work item also, queued just before disabling the interrupt as log buffer flush interrupt handling is a bit different case where GuC is actually expecting an ACK from host, which should be provided to keep the logging going. Sync against the work will be done by caller disabling the interrupt. - Don't sample the log buffer size value from state structure, directly use the expected value to move the pointer & do the copy and that cannot go wrong (out of bounds) as Driver only allocated the log buffer and the relay buffers. Driver should refrain from interpreting the log packet, as much possible and let Userspace parser detect the anomaly. (Chris) v7: - Use switch statement instead of 'if else' for retrieving the GuC log buffer size. (Tvrtko) - Refactored the log buffer copying function and shortended the name of couple of variables for better readability. (Tvrtko) v8: - Make the dedicated wq as a high priority one to further reduce the turnaround time of handing log buffer flush event from GuC. Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by: Akash Goel <akash.goel@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2016-10-13 00:24:32 +08:00
void *buf_addr;
struct workqueue_struct *flush_wq;
struct work_struct flush_work;
drm/i915: Add a relay backed debugfs interface for capturing GuC logs Added a new debugfs interface '/sys/kernel/debug/dri/guc_log' for the User to capture GuC firmware logs. Availed relay framework to implement the interface, where Driver will have to just use a relay API to store snapshots of the GuC log buffer in the buffer managed by relay. The snapshot will be taken when GuC firmware sends a log buffer flush interrupt and up to four snapshots could be stored in the relay buffer. The relay buffer will be operated in a mode where it will overwrite the data not yet collected by User. Besides mmap method, through which User can directly access the relay buffer contents, relay also supports the 'poll' method. Through the 'poll' call on log file, User can come to know whenever a new snapshot of the log buffer is taken by Driver, so can run in tandem with the Driver and capture the logs in a sustained/streaming manner, without any loss of data. v2: Defer the creation of relay channel & associated debugfs file, as debugfs setup is now done at the end of i915 Driver load. (Chris) v3: - Switch to no-overwrite mode for relay. - Fix the relay sub buffer switching sequence. v4: - Update i915 Kconfig to select RELAY config. (TvrtKo) - Log a message when there is no sub buffer available to capture the GuC log buffer. (Tvrtko) - Increase the number of relay sub buffers to 8 from 4, to have sufficient buffering for boot time logs v5: - Fix the alignment, indentation issues and some minor cleanup. (Tvrtko) - Update the comment to elaborate on why a relay channel has to be associated with the debugfs file. (Tvrtko) v6: - Move the write to 'is_global' after the NULL check on parent directory dentry pointer. (Tvrtko) v7: Add a BUG_ON to validate relay buffer allocation size. (Chris) Testcase: igt/tools/intel_guc_logger Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Sourab Gupta <sourab.gupta@intel.com> Signed-off-by: Akash Goel <akash.goel@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2016-10-13 00:24:34 +08:00
struct rchan *relay_chan;
/* logging related stats */
u32 capture_miss_count;
u32 flush_interrupt_count;
u32 prev_overflow_count[GUC_MAX_LOG_BUFFER];
u32 total_overflow_count[GUC_MAX_LOG_BUFFER];
u32 flush_count[GUC_MAX_LOG_BUFFER];
};
struct intel_guc {
drm/i915/guc: Make the GuC fw loading helper functions general Rename some of the GuC fw loading code to make them more general. We will utilise them for HuC loading as well. s/intel_guc_fw/intel_uc_fw/g s/GUC_FIRMWARE/INTEL_UC_FIRMWARE/g Struct intel_guc_fw is renamed to intel_uc_fw. Prefix of tts members, such as 'guc' or 'guc_fw' either is renamed to 'uc' or removed for same purpose. v2: rebased on top of nightly. reapplied the search/replace as upstream code as changed. v3: removed G from messages in shared fw fetch function. v4: rebased.Updated dev to dev_priv in intel_guc_setup(), guc_fw_getch() and intel_guc_init(). v5: rebased. Remove uint32_t fw_type to patch 2. Add INTEL_ prefix for fields in enum intel_uc_fw_status. Remove uc_dev field since its never used.Rename uc_fw to just fw and guc_fw to fw to avoid redundency. v6: rebased. Remove sections of code that were commented and no longer required. v7: rebased. Remove uc_fw_ prefix from path and obj fields in intel_uc_fw struct as suggested by Michal. v8: rebased. Add declaration of intel_guc_wopcm_size() in this patch instead of patch 3. Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Alex Dai <yu.dai@intel.com> Signed-off-by: Peter Antoine <peter.antoine@intel.com> Reviewed-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1484356631-16139-2-git-send-email-anusha.srivatsa@intel.com
2017-01-14 09:17:04 +08:00
struct intel_uc_fw fw;
struct intel_guc_log log;
/* intel_guc_recv interrupt related state */
drm/i915: Support for GuC interrupts There are certain types of interrupts which Host can receive from GuC. GuC ukernel sends an interrupt to Host for certain events, like for example retrieve/consume the logs generated by ukernel. This patch adds support to receive interrupts from GuC but currently enables & partially handles only the interrupt sent by GuC ukernel. Future patches will add support for handling other interrupt types. v2: - Use common low level routines for PM IER/IIR programming (Chris) - Rename interrupt functions to gen9_xxx from gen8_xxx (Chris) - Replace disabling of wake ref asserts with rpm get/put (Chris) v3: - Update comments for more clarity. (Tvrtko) - Remove the masking of GuC interrupt, which was kept masked till the start of bottom half, its not really needed as there is only a single instance of work item & wq is ordered. (Tvrtko) v4: - Rebase. - Rename guc_events to pm_guc_events so as to be indicative of the register/control block it is associated with. (Chris) - Add handling for back to back log buffer flush interrupts. v5: - Move the read & clearing of register, containing Guc2Host message bits, outside the irq spinlock. (Tvrtko) v6: - Move the log buffer flush interrupt related stuff to the following patch so as to do only generic bits in this patch. (Tvrtko) - Rebase. v7: - Remove the interrupts_enabled check from gen9_guc_irq_handler, want to process that last interrupt also before disabling the interrupt, sync against the work queued by irq handler will be done by caller disabling the interrupt. Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by: Akash Goel <akash.goel@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2016-10-13 00:24:31 +08:00
bool interrupts_enabled;
struct i915_vma *ads_vma;
struct i915_vma *ctx_pool_vma;
struct ida ctx_ids;
struct i915_guc_client *execbuf_client;
DECLARE_BITMAP(doorbell_bitmap, GUC_MAX_DOORBELLS);
uint32_t db_cacheline; /* Cyclic counter mod pagesize */
/* Action status & statistics */
uint64_t action_count; /* Total commands issued */
uint32_t action_cmd; /* Last command word */
uint32_t action_status; /* Last return status */
uint32_t action_fail; /* Total number of failures */
int32_t action_err; /* Last error code */
uint64_t submissions[I915_NUM_ENGINES];
uint32_t last_seqno[I915_NUM_ENGINES];
/* To serialize the intel_guc_send actions */
struct mutex send_mutex;
};
drm/i915/huc: Add HuC fw loading support The HuC loading process is similar to GuC. The intel_uc_fw_fetch() is used for both cases. HuC loading needs to be before GuC loading. The WOPCM setting must be done early before loading any of them. v2: rebased on-top of drm-intel-nightly. removed if(HAS_GUC()) before the guc call. (D.Gordon) update huc_version number of format. v3: rebased to drm-intel-nightly, changed the file name format to match the one in the huc package. Changed dev->dev_private to to_i915() v4: moved function back to where it was. change wait_for_atomic to wait_for. v5: rebased. Changed the year in the copyright message to reflect the right year.Correct the comments,remove the unwanted WARN message, replace drm_gem_object_unreference() with i915_gem_object_put().Make the prototypes in intel_huc.h non-extern. v6: rebased. Update the file construction done by HuC. It is similar to GuC.Adopted the approach used in- https://patchwork.freedesktop.org/patch/104355/ <Tvrtko Ursulin> v7: Change dev to dev_priv in macro definition. Corrected comments. v8: rebased on top of drm-tip. Updated functions intel_huc_load(), intel_huc_init() and intel_uc_fw_fetch() to accept dev_priv instead of dev. Moved contents of intel_huc.h to intel_uc.h. v9: change SKL_FW_ to SKL_HUC_FW_. Add intel_ prefix to guc_wopcm_size(). Remove unwanted checks in intel_uc.h. Rename huc_fw in struct intel_huc to simply fw to avoid redundency. v10: rebased. Correct comments. Make intel_huc_fini() accept dev_priv instead of dev like intel_huc_init() and intel_huc_load().Move definition to i915_guc_reg.h from intel_uc.h. Clean DMA_CTRL bits after HuC DMA transfer in huc_ucode_xfer() instead of guc_ucode_xfer(). Add suitable WARNs to give extra info. v11: rebased. Add proper bias for HuC and make sure there are asserts on failure by using guc_ggtt_offset_vma(). Introduce intel_huc.c and remove intel_huc_loader.c since it has functions that do more than just loading.Correct year in copyright. v12: remove invalidates that are not required anymore. Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Tested-by: Xiang Haihao <haihao.xiang@intel.com> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Alex Dai <yu.dai@intel.com> Signed-off-by: Peter Antoine <peter.antoine@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1484755558-1234-1-git-send-email-anusha.srivatsa@intel.com
2017-01-19 00:05:53 +08:00
struct intel_huc {
/* Generic uC firmware management */
struct intel_uc_fw fw;
/* HuC-specific additions */
};
/* intel_uc.c */
void intel_uc_sanitize_options(struct drm_i915_private *dev_priv);
void intel_uc_init_early(struct drm_i915_private *dev_priv);
void intel_uc_init_fw(struct drm_i915_private *dev_priv);
void intel_uc_prepare_fw(struct drm_i915_private *dev_priv,
struct intel_uc_fw *uc_fw);
int intel_guc_send(struct intel_guc *guc, const u32 *action, u32 len);
int intel_guc_sample_forcewake(struct intel_guc *guc);
/* intel_guc_loader.c */
void intel_guc_init_fw(struct intel_guc *guc);
int intel_guc_init_hw(struct intel_guc *guc);
void intel_guc_fini(struct drm_i915_private *dev_priv);
const char *intel_uc_fw_status_repr(enum intel_uc_fw_status status);
int intel_guc_suspend(struct drm_i915_private *dev_priv);
int intel_guc_resume(struct drm_i915_private *dev_priv);
drm/i915/guc: Make the GuC fw loading helper functions general Rename some of the GuC fw loading code to make them more general. We will utilise them for HuC loading as well. s/intel_guc_fw/intel_uc_fw/g s/GUC_FIRMWARE/INTEL_UC_FIRMWARE/g Struct intel_guc_fw is renamed to intel_uc_fw. Prefix of tts members, such as 'guc' or 'guc_fw' either is renamed to 'uc' or removed for same purpose. v2: rebased on top of nightly. reapplied the search/replace as upstream code as changed. v3: removed G from messages in shared fw fetch function. v4: rebased.Updated dev to dev_priv in intel_guc_setup(), guc_fw_getch() and intel_guc_init(). v5: rebased. Remove uint32_t fw_type to patch 2. Add INTEL_ prefix for fields in enum intel_uc_fw_status. Remove uc_dev field since its never used.Rename uc_fw to just fw and guc_fw to fw to avoid redundency. v6: rebased. Remove sections of code that were commented and no longer required. v7: rebased. Remove uc_fw_ prefix from path and obj fields in intel_uc_fw struct as suggested by Michal. v8: rebased. Add declaration of intel_guc_wopcm_size() in this patch instead of patch 3. Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Alex Dai <yu.dai@intel.com> Signed-off-by: Peter Antoine <peter.antoine@intel.com> Reviewed-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1484356631-16139-2-git-send-email-anusha.srivatsa@intel.com
2017-01-14 09:17:04 +08:00
u32 intel_guc_wopcm_size(struct drm_i915_private *dev_priv);
/* i915_guc_submission.c */
int i915_guc_submission_init(struct drm_i915_private *dev_priv);
int i915_guc_submission_enable(struct drm_i915_private *dev_priv);
int i915_guc_wq_reserve(struct drm_i915_gem_request *rq);
void i915_guc_wq_unreserve(struct drm_i915_gem_request *request);
void i915_guc_submission_disable(struct drm_i915_private *dev_priv);
void i915_guc_submission_fini(struct drm_i915_private *dev_priv);
struct i915_vma *intel_guc_allocate_vma(struct intel_guc *guc, u32 size);
/* intel_guc_log.c */
void intel_guc_log_create(struct intel_guc *guc);
void i915_guc_log_register(struct drm_i915_private *dev_priv);
void i915_guc_log_unregister(struct drm_i915_private *dev_priv);
int i915_guc_log_control(struct drm_i915_private *dev_priv, u64 control_val);
static inline u32 guc_ggtt_offset(struct i915_vma *vma)
{
u32 offset = i915_ggtt_offset(vma);
GEM_BUG_ON(offset < GUC_WOPCM_TOP);
GEM_BUG_ON(range_overflows_t(u64, offset, vma->size, GUC_GGTT_TOP));
return offset;
}
drm/i915/huc: Add HuC fw loading support The HuC loading process is similar to GuC. The intel_uc_fw_fetch() is used for both cases. HuC loading needs to be before GuC loading. The WOPCM setting must be done early before loading any of them. v2: rebased on-top of drm-intel-nightly. removed if(HAS_GUC()) before the guc call. (D.Gordon) update huc_version number of format. v3: rebased to drm-intel-nightly, changed the file name format to match the one in the huc package. Changed dev->dev_private to to_i915() v4: moved function back to where it was. change wait_for_atomic to wait_for. v5: rebased. Changed the year in the copyright message to reflect the right year.Correct the comments,remove the unwanted WARN message, replace drm_gem_object_unreference() with i915_gem_object_put().Make the prototypes in intel_huc.h non-extern. v6: rebased. Update the file construction done by HuC. It is similar to GuC.Adopted the approach used in- https://patchwork.freedesktop.org/patch/104355/ <Tvrtko Ursulin> v7: Change dev to dev_priv in macro definition. Corrected comments. v8: rebased on top of drm-tip. Updated functions intel_huc_load(), intel_huc_init() and intel_uc_fw_fetch() to accept dev_priv instead of dev. Moved contents of intel_huc.h to intel_uc.h. v9: change SKL_FW_ to SKL_HUC_FW_. Add intel_ prefix to guc_wopcm_size(). Remove unwanted checks in intel_uc.h. Rename huc_fw in struct intel_huc to simply fw to avoid redundency. v10: rebased. Correct comments. Make intel_huc_fini() accept dev_priv instead of dev like intel_huc_init() and intel_huc_load().Move definition to i915_guc_reg.h from intel_uc.h. Clean DMA_CTRL bits after HuC DMA transfer in huc_ucode_xfer() instead of guc_ucode_xfer(). Add suitable WARNs to give extra info. v11: rebased. Add proper bias for HuC and make sure there are asserts on failure by using guc_ggtt_offset_vma(). Introduce intel_huc.c and remove intel_huc_loader.c since it has functions that do more than just loading.Correct year in copyright. v12: remove invalidates that are not required anymore. Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Tested-by: Xiang Haihao <haihao.xiang@intel.com> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Alex Dai <yu.dai@intel.com> Signed-off-by: Peter Antoine <peter.antoine@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1484755558-1234-1-git-send-email-anusha.srivatsa@intel.com
2017-01-19 00:05:53 +08:00
/* intel_huc.c */
void intel_huc_init_fw(struct intel_huc *huc);
drm/i915/huc: Add HuC fw loading support The HuC loading process is similar to GuC. The intel_uc_fw_fetch() is used for both cases. HuC loading needs to be before GuC loading. The WOPCM setting must be done early before loading any of them. v2: rebased on-top of drm-intel-nightly. removed if(HAS_GUC()) before the guc call. (D.Gordon) update huc_version number of format. v3: rebased to drm-intel-nightly, changed the file name format to match the one in the huc package. Changed dev->dev_private to to_i915() v4: moved function back to where it was. change wait_for_atomic to wait_for. v5: rebased. Changed the year in the copyright message to reflect the right year.Correct the comments,remove the unwanted WARN message, replace drm_gem_object_unreference() with i915_gem_object_put().Make the prototypes in intel_huc.h non-extern. v6: rebased. Update the file construction done by HuC. It is similar to GuC.Adopted the approach used in- https://patchwork.freedesktop.org/patch/104355/ <Tvrtko Ursulin> v7: Change dev to dev_priv in macro definition. Corrected comments. v8: rebased on top of drm-tip. Updated functions intel_huc_load(), intel_huc_init() and intel_uc_fw_fetch() to accept dev_priv instead of dev. Moved contents of intel_huc.h to intel_uc.h. v9: change SKL_FW_ to SKL_HUC_FW_. Add intel_ prefix to guc_wopcm_size(). Remove unwanted checks in intel_uc.h. Rename huc_fw in struct intel_huc to simply fw to avoid redundency. v10: rebased. Correct comments. Make intel_huc_fini() accept dev_priv instead of dev like intel_huc_init() and intel_huc_load().Move definition to i915_guc_reg.h from intel_uc.h. Clean DMA_CTRL bits after HuC DMA transfer in huc_ucode_xfer() instead of guc_ucode_xfer(). Add suitable WARNs to give extra info. v11: rebased. Add proper bias for HuC and make sure there are asserts on failure by using guc_ggtt_offset_vma(). Introduce intel_huc.c and remove intel_huc_loader.c since it has functions that do more than just loading.Correct year in copyright. v12: remove invalidates that are not required anymore. Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Tested-by: Xiang Haihao <haihao.xiang@intel.com> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Alex Dai <yu.dai@intel.com> Signed-off-by: Peter Antoine <peter.antoine@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1484755558-1234-1-git-send-email-anusha.srivatsa@intel.com
2017-01-19 00:05:53 +08:00
void intel_huc_fini(struct drm_i915_private *dev_priv);
int intel_huc_init_hw(struct intel_huc *huc);
drm/i915/huc: Support HuC authentication The HuC authentication is done by host2guc call. The HuC RSA keys are sent to GuC for authentication. v2: rebased on top of drm-tip. Changed name format and upped version 1.7. v3: changed wait_for_atomic to wait_for v4: rebased. Rename intel_huc_auh() to intel_guc_auth_huc() and place the prototype in intel_guc.h,correct the comments. v5: rebased. Moved intel_guc_auth_huc from i915_guc_submission.c to intel_uc.c.Update dev to dev_priv in intel_guc_auth_huc(). Renamed HOST2GUC_ACTION_AUTHENTICATE_HUC TO INTEL_GUC_ACTION_ AUTHENTICATE_HUC v6: rebased. Add newline on DRM_ERRORs that already dont have one. v7: rebased. Replace wait_for with intel_wait_for_register() since the latter employs sleep optimisations for quick responses- as pointed out by Chris Wilson. v8: rebased. Cleanup the intel_guc_auth_huc() by removing checks already performed in earlier functions. Make comments more descriptive. v9: rebased. Changed the bias for pinning the HuC object. Move intel_guc_auth_huc() to intel_huc.c. Change DRM_DEBUGs to DRM_ERRORs in intel_guc_auth_huc(). Add return status to DRM_ERRORs. v10: Remove message not required for the user.. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Tested-by: Xiang Haihao <haihao.xiang@intel.com> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Alex Dai <yu.dai@intel.com> Signed-off-by: Peter Antoine <peter.antoine@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1484755558-1234-5-git-send-email-anusha.srivatsa@intel.com
2017-01-19 00:05:57 +08:00
void intel_guc_auth_huc(struct drm_i915_private *dev_priv);
drm/i915/huc: Add HuC fw loading support The HuC loading process is similar to GuC. The intel_uc_fw_fetch() is used for both cases. HuC loading needs to be before GuC loading. The WOPCM setting must be done early before loading any of them. v2: rebased on-top of drm-intel-nightly. removed if(HAS_GUC()) before the guc call. (D.Gordon) update huc_version number of format. v3: rebased to drm-intel-nightly, changed the file name format to match the one in the huc package. Changed dev->dev_private to to_i915() v4: moved function back to where it was. change wait_for_atomic to wait_for. v5: rebased. Changed the year in the copyright message to reflect the right year.Correct the comments,remove the unwanted WARN message, replace drm_gem_object_unreference() with i915_gem_object_put().Make the prototypes in intel_huc.h non-extern. v6: rebased. Update the file construction done by HuC. It is similar to GuC.Adopted the approach used in- https://patchwork.freedesktop.org/patch/104355/ <Tvrtko Ursulin> v7: Change dev to dev_priv in macro definition. Corrected comments. v8: rebased on top of drm-tip. Updated functions intel_huc_load(), intel_huc_init() and intel_uc_fw_fetch() to accept dev_priv instead of dev. Moved contents of intel_huc.h to intel_uc.h. v9: change SKL_FW_ to SKL_HUC_FW_. Add intel_ prefix to guc_wopcm_size(). Remove unwanted checks in intel_uc.h. Rename huc_fw in struct intel_huc to simply fw to avoid redundency. v10: rebased. Correct comments. Make intel_huc_fini() accept dev_priv instead of dev like intel_huc_init() and intel_huc_load().Move definition to i915_guc_reg.h from intel_uc.h. Clean DMA_CTRL bits after HuC DMA transfer in huc_ucode_xfer() instead of guc_ucode_xfer(). Add suitable WARNs to give extra info. v11: rebased. Add proper bias for HuC and make sure there are asserts on failure by using guc_ggtt_offset_vma(). Introduce intel_huc.c and remove intel_huc_loader.c since it has functions that do more than just loading.Correct year in copyright. v12: remove invalidates that are not required anymore. Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Tested-by: Xiang Haihao <haihao.xiang@intel.com> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Alex Dai <yu.dai@intel.com> Signed-off-by: Peter Antoine <peter.antoine@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1484755558-1234-1-git-send-email-anusha.srivatsa@intel.com
2017-01-19 00:05:53 +08:00
#endif