linux-sg2042/drivers/char/sxboards.h

207 lines
8.5 KiB
C
Raw Normal View History

/************************************************************************/
/* */
/* Title : SX/SI/XIO Board Hardware Definitions */
/* */
/* Author : N.P.Vassallo */
/* */
/* Creation : 16th March 1998 */
/* */
/* Version : 3.0.0 */
/* */
/* Copyright : (c) Specialix International Ltd. 1998 */
/* */
/* Description : Prototypes, structures and definitions */
/* describing the SX/SI/XIO board hardware */
/* */
/************************************************************************/
/* History...
3.0.0 16/03/98 NPV Creation.
*/
#ifndef _sxboards_h /* If SXBOARDS.H not already defined */
#define _sxboards_h 1
/*****************************************************************************
******************************* ******************************
******************************* Board Types ******************************
******************************* ******************************
*****************************************************************************/
/* BUS types... */
#define BUS_ISA 0
#define BUS_MCA 1
#define BUS_EISA 2
#define BUS_PCI 3
/* Board phases... */
#define SI1_Z280 1
#define SI2_Z280 2
#define SI3_T225 3
/* Board types... */
#define CARD_TYPE(bus,phase) (bus<<4|phase)
#define CARD_BUS(type) ((type>>4)&0xF)
#define CARD_PHASE(type) (type&0xF)
#define TYPE_SI1_ISA CARD_TYPE(BUS_ISA,SI1_Z280)
#define TYPE_SI2_ISA CARD_TYPE(BUS_ISA,SI2_Z280)
#define TYPE_SI2_EISA CARD_TYPE(BUS_EISA,SI2_Z280)
#define TYPE_SI2_PCI CARD_TYPE(BUS_PCI,SI2_Z280)
#define TYPE_SX_ISA CARD_TYPE(BUS_ISA,SI3_T225)
#define TYPE_SX_PCI CARD_TYPE(BUS_PCI,SI3_T225)
/*****************************************************************************
****************************** ******************************
****************************** Phase 1 Z280 ******************************
****************************** ******************************
*****************************************************************************/
/* ISA board details... */
#define SI1_ISA_WINDOW_LEN 0x10000 /* 64 Kbyte shared memory window */
//#define SI1_ISA_MEMORY_LEN 0x8000 /* Usable memory - unused define*/
//#define SI1_ISA_ADDR_LOW 0x0A0000 /* Lowest address = 640 Kbyte */
//#define SI1_ISA_ADDR_HIGH 0xFF8000 /* Highest address = 16Mbyte - 32Kbyte */
//#define SI2_ISA_ADDR_STEP SI2_ISA_WINDOW_LEN/* ISA board address step */
//#define SI2_ISA_IRQ_MASK 0x9800 /* IRQs 15,12,11 */
/* ISA board, register definitions... */
//#define SI2_ISA_ID_BASE 0x7FF8 /* READ: Board ID string */
#define SI1_ISA_RESET 0x8000 /* WRITE: Host Reset */
#define SI1_ISA_RESET_CLEAR 0xc000 /* WRITE: Host Reset clear*/
#define SI1_ISA_WAIT 0x9000 /* WRITE: Host wait */
#define SI1_ISA_WAIT_CLEAR 0xd000 /* WRITE: Host wait clear */
#define SI1_ISA_INTCL 0xa000 /* WRITE: Host Reset */
#define SI1_ISA_INTCL_CLEAR 0xe000 /* WRITE: Host Reset */
/*****************************************************************************
****************************** ******************************
****************************** Phase 2 Z280 ******************************
****************************** ******************************
*****************************************************************************/
/* ISA board details... */
#define SI2_ISA_WINDOW_LEN 0x8000 /* 32 Kbyte shared memory window */
#define SI2_ISA_MEMORY_LEN 0x7FF8 /* Usable memory */
#define SI2_ISA_ADDR_LOW 0x0A0000 /* Lowest address = 640 Kbyte */
#define SI2_ISA_ADDR_HIGH 0xFF8000 /* Highest address = 16Mbyte - 32Kbyte */
#define SI2_ISA_ADDR_STEP SI2_ISA_WINDOW_LEN/* ISA board address step */
#define SI2_ISA_IRQ_MASK 0x9800 /* IRQs 15,12,11 */
/* ISA board, register definitions... */
#define SI2_ISA_ID_BASE 0x7FF8 /* READ: Board ID string */
#define SI2_ISA_RESET SI2_ISA_ID_BASE /* WRITE: Host Reset */
#define SI2_ISA_IRQ11 (SI2_ISA_ID_BASE+1) /* WRITE: Set IRQ11 */
#define SI2_ISA_IRQ12 (SI2_ISA_ID_BASE+2) /* WRITE: Set IRQ12 */
#define SI2_ISA_IRQ15 (SI2_ISA_ID_BASE+3) /* WRITE: Set IRQ15 */
#define SI2_ISA_IRQSET (SI2_ISA_ID_BASE+4) /* WRITE: Set Host Interrupt */
#define SI2_ISA_INTCLEAR (SI2_ISA_ID_BASE+5) /* WRITE: Enable Host Interrupt */
#define SI2_ISA_IRQ11_SET 0x10
#define SI2_ISA_IRQ11_CLEAR 0x00
#define SI2_ISA_IRQ12_SET 0x10
#define SI2_ISA_IRQ12_CLEAR 0x00
#define SI2_ISA_IRQ15_SET 0x10
#define SI2_ISA_IRQ15_CLEAR 0x00
#define SI2_ISA_INTCLEAR_SET 0x10
#define SI2_ISA_INTCLEAR_CLEAR 0x00
#define SI2_ISA_IRQSET_CLEAR 0x10
#define SI2_ISA_IRQSET_SET 0x00
#define SI2_ISA_RESET_SET 0x00
#define SI2_ISA_RESET_CLEAR 0x10
/* PCI board details... */
#define SI2_PCI_WINDOW_LEN 0x100000 /* 1 Mbyte memory window */
/* PCI board register definitions... */
#define SI2_PCI_SET_IRQ 0x40001 /* Set Host Interrupt */
#define SI2_PCI_RESET 0xC0001 /* Host Reset */
/*****************************************************************************
****************************** ******************************
****************************** Phase 3 T225 ******************************
****************************** ******************************
*****************************************************************************/
/* General board details... */
#define SX_WINDOW_LEN 64*1024 /* 64 Kbyte memory window */
/* ISA board details... */
#define SX_ISA_ADDR_LOW 0x0A0000 /* Lowest address = 640 Kbyte */
#define SX_ISA_ADDR_HIGH 0xFF8000 /* Highest address = 16Mbyte - 32Kbyte */
#define SX_ISA_ADDR_STEP SX_WINDOW_LEN /* ISA board address step */
#define SX_ISA_IRQ_MASK 0x9E00 /* IRQs 15,12,11,10,9 */
/* Hardware register definitions... */
#define SX_EVENT_STATUS 0x7800 /* READ: T225 Event Status */
#define SX_EVENT_STROBE 0x7800 /* WRITE: T225 Event Strobe */
#define SX_EVENT_ENABLE 0x7880 /* WRITE: T225 Event Enable */
#define SX_VPD_ROM 0x7C00 /* READ: Vital Product Data ROM */
#define SX_CONFIG 0x7C00 /* WRITE: Host Configuration Register */
#define SX_IRQ_STATUS 0x7C80 /* READ: Host Interrupt Status */
#define SX_SET_IRQ 0x7C80 /* WRITE: Set Host Interrupt */
#define SX_RESET_STATUS 0x7D00 /* READ: Host Reset Status */
#define SX_RESET 0x7D00 /* WRITE: Host Reset */
#define SX_RESET_IRQ 0x7D80 /* WRITE: Reset Host Interrupt */
/* SX_VPD_ROM definitions... */
#define SX_VPD_SLX_ID1 0x00
#define SX_VPD_SLX_ID2 0x01
#define SX_VPD_HW_REV 0x02
#define SX_VPD_HW_ASSEM 0x03
#define SX_VPD_UNIQUEID4 0x04
#define SX_VPD_UNIQUEID3 0x05
#define SX_VPD_UNIQUEID2 0x06
#define SX_VPD_UNIQUEID1 0x07
#define SX_VPD_MANU_YEAR 0x08
#define SX_VPD_MANU_WEEK 0x09
#define SX_VPD_IDENT 0x10
#define SX_VPD_IDENT_STRING "JET HOST BY KEV#"
/* SX unique identifiers... */
#define SX_UNIQUEID_MASK 0xF0
#define SX_ISA_UNIQUEID1 0x20
#define SX_PCI_UNIQUEID1 0x50
/* SX_CONFIG definitions... */
#define SX_CONF_BUSEN 0x02 /* Enable T225 memory and I/O */
#define SX_CONF_HOSTIRQ 0x04 /* Enable board to host interrupt */
/* SX bootstrap... */
#define SX_BOOTSTRAP "\x28\x20\x21\x02\x60\x0a"
#define SX_BOOTSTRAP_SIZE 6
#define SX_BOOTSTRAP_ADDR (0x8000-SX_BOOTSTRAP_SIZE)
/*****************************************************************************
********************************** **********************************
********************************** EISA **********************************
********************************** **********************************
*****************************************************************************/
#define SI2_EISA_OFF 0x42
#define SI2_EISA_VAL 0x01
#define SI2_EISA_WINDOW_LEN 0x10000
/*****************************************************************************
*********************************** **********************************
*********************************** PCI **********************************
*********************************** **********************************
*****************************************************************************/
/* General definitions... */
#define SPX_VENDOR_ID 0x11CB /* Assigned by the PCI SIG */
#define SPX_DEVICE_ID 0x4000 /* SI/XIO boards */
#define SPX_PLXDEVICE_ID 0x2000 /* SX boards */
#define SPX_SUB_VENDOR_ID SPX_VENDOR_ID /* Same as vendor id */
#define SI2_SUB_SYS_ID 0x400 /* Phase 2 (Z280) board */
#define SX_SUB_SYS_ID 0x200 /* Phase 3 (t225) board */
#endif /*_sxboards_h */
/* End of SXBOARDS.H */