linux-sg2042/arch/powerpc/lib/memcpy_64.S

200 lines
3.5 KiB
ArmAsm
Raw Normal View History

/*
* Copyright (C) 2002 Paul Mackerras, IBM Corp.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <asm/processor.h>
#include <asm/ppc_asm.h>
.align 7
_GLOBAL(memcpy)
std r3,48(r1) /* save destination pointer for return value */
PPC_MTOCRF 0x01,r5
cmpldi cr1,r5,16
neg r6,r3 # LS 3 bits = # bytes to 8-byte dest bdry
andi. r6,r6,7
dcbt 0,r4
blt cr1,.Lshort_copy
powerpc: Update 64bit memcpy() using CPU_FTR_UNALIGNED_LD_STD Update memcpy() to add two new feature sections: one for aligning the destination before copying and one for copying using aligned load and store doubles. These new feature sections will only affect Power6 and Cell because the CPU feature bit was only added to these two processors. Power6 gets its best performance in memcpy() when aligning neither the source nor the destination, while Cell gets its best performance when just the destination is aligned. But in order to save on CPU feature bits we can use the previously added CPU_FTR_CP_USE_DCBTZ feature bit to differentiate between Power6 and Cell (because CPU_FTR_CP_USE_DCBTZ was added to Cell but not Power6). The first feature section acts to nop out the branch that takes us to the code that aligns us to an eight byte boundary for the destination. We only want to nop out this branch on Power6. So the ALT_FTR_SECTION_END() for this feature section creates a test mask of the two feature bits ORed together and provides an expected result of just CPU_FTR_UNALIGNED_LD_STD, thus we nop out the branch if we're on a CPU that has CPU_FTR_UNALIGNED_LD_STD set and CPU_FTR_CP_USE_DCBTZ unset. For the second feature section added, if we're on a CPU that has the CPU_FTR_UNALIGNED_LD_STD bit set then we don't want to do the copy with aligned loads and stores (and the appropriate shifting left and right instructions), so we want to nop out the branch to .Lsrc_unaligned. The andi. used for this branch is moved to just above the branch because this allows us to nop out both instructions with just one feature section which gives us better performance and doesn't hurt readability which two separate feature sections did. Moving the andi. to just above the branch doesn't have any noticeable negative effect on the remaining 64bit processors (the ones that didn't have this feature bit added). On Cell this simple modification results in an improvement to measured memcpy() bandwidth of up to 50% in the hot cache case and up to 15% in the cold cache case. On Power6 we get memory bandwidth results that are up to three times faster in the hot cache case and up to 50% faster in the cold cache case. Commit 2a9294369bd020db89bfdf78b84c3615b39a5c84 ("powerpc: Add new CPU feature: CPU_FTR_CP_USE_DCBTZ") was where CPU_FTR_CP_USE_DCBTZ was added. To say that Cell gets its best performance in memcpy() with just the destination aligned is true but only for the reason that the indirect shift and rotate instructions, sld and srd, are microcoded on Cell. This means that either the destination or the source can be aligned, but not both, and seeing as we get better performance with the destination aligned we choose this option. While we're at it make a one line change from cmpldi r1,... to cmpldi cr1,... for consistency. Signed-off-by: Mark Nelson <markn@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-27 08:46:51 +08:00
/* Below we want to nop out the bne if we're on a CPU that has the
CPU_FTR_UNALIGNED_LD_STD bit set and the CPU_FTR_CP_USE_DCBTZ bit
cleared.
At the time of writing the only CPU that has this combination of bits
set is Power6. */
BEGIN_FTR_SECTION
nop
FTR_SECTION_ELSE
bne .Ldst_unaligned
powerpc: Update 64bit memcpy() using CPU_FTR_UNALIGNED_LD_STD Update memcpy() to add two new feature sections: one for aligning the destination before copying and one for copying using aligned load and store doubles. These new feature sections will only affect Power6 and Cell because the CPU feature bit was only added to these two processors. Power6 gets its best performance in memcpy() when aligning neither the source nor the destination, while Cell gets its best performance when just the destination is aligned. But in order to save on CPU feature bits we can use the previously added CPU_FTR_CP_USE_DCBTZ feature bit to differentiate between Power6 and Cell (because CPU_FTR_CP_USE_DCBTZ was added to Cell but not Power6). The first feature section acts to nop out the branch that takes us to the code that aligns us to an eight byte boundary for the destination. We only want to nop out this branch on Power6. So the ALT_FTR_SECTION_END() for this feature section creates a test mask of the two feature bits ORed together and provides an expected result of just CPU_FTR_UNALIGNED_LD_STD, thus we nop out the branch if we're on a CPU that has CPU_FTR_UNALIGNED_LD_STD set and CPU_FTR_CP_USE_DCBTZ unset. For the second feature section added, if we're on a CPU that has the CPU_FTR_UNALIGNED_LD_STD bit set then we don't want to do the copy with aligned loads and stores (and the appropriate shifting left and right instructions), so we want to nop out the branch to .Lsrc_unaligned. The andi. used for this branch is moved to just above the branch because this allows us to nop out both instructions with just one feature section which gives us better performance and doesn't hurt readability which two separate feature sections did. Moving the andi. to just above the branch doesn't have any noticeable negative effect on the remaining 64bit processors (the ones that didn't have this feature bit added). On Cell this simple modification results in an improvement to measured memcpy() bandwidth of up to 50% in the hot cache case and up to 15% in the cold cache case. On Power6 we get memory bandwidth results that are up to three times faster in the hot cache case and up to 50% faster in the cold cache case. Commit 2a9294369bd020db89bfdf78b84c3615b39a5c84 ("powerpc: Add new CPU feature: CPU_FTR_CP_USE_DCBTZ") was where CPU_FTR_CP_USE_DCBTZ was added. To say that Cell gets its best performance in memcpy() with just the destination aligned is true but only for the reason that the indirect shift and rotate instructions, sld and srd, are microcoded on Cell. This means that either the destination or the source can be aligned, but not both, and seeing as we get better performance with the destination aligned we choose this option. While we're at it make a one line change from cmpldi r1,... to cmpldi cr1,... for consistency. Signed-off-by: Mark Nelson <markn@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-27 08:46:51 +08:00
ALT_FTR_SECTION_END(CPU_FTR_UNALIGNED_LD_STD | CPU_FTR_CP_USE_DCBTZ, \
CPU_FTR_UNALIGNED_LD_STD)
.Ldst_aligned:
addi r3,r3,-16
powerpc: Update 64bit memcpy() using CPU_FTR_UNALIGNED_LD_STD Update memcpy() to add two new feature sections: one for aligning the destination before copying and one for copying using aligned load and store doubles. These new feature sections will only affect Power6 and Cell because the CPU feature bit was only added to these two processors. Power6 gets its best performance in memcpy() when aligning neither the source nor the destination, while Cell gets its best performance when just the destination is aligned. But in order to save on CPU feature bits we can use the previously added CPU_FTR_CP_USE_DCBTZ feature bit to differentiate between Power6 and Cell (because CPU_FTR_CP_USE_DCBTZ was added to Cell but not Power6). The first feature section acts to nop out the branch that takes us to the code that aligns us to an eight byte boundary for the destination. We only want to nop out this branch on Power6. So the ALT_FTR_SECTION_END() for this feature section creates a test mask of the two feature bits ORed together and provides an expected result of just CPU_FTR_UNALIGNED_LD_STD, thus we nop out the branch if we're on a CPU that has CPU_FTR_UNALIGNED_LD_STD set and CPU_FTR_CP_USE_DCBTZ unset. For the second feature section added, if we're on a CPU that has the CPU_FTR_UNALIGNED_LD_STD bit set then we don't want to do the copy with aligned loads and stores (and the appropriate shifting left and right instructions), so we want to nop out the branch to .Lsrc_unaligned. The andi. used for this branch is moved to just above the branch because this allows us to nop out both instructions with just one feature section which gives us better performance and doesn't hurt readability which two separate feature sections did. Moving the andi. to just above the branch doesn't have any noticeable negative effect on the remaining 64bit processors (the ones that didn't have this feature bit added). On Cell this simple modification results in an improvement to measured memcpy() bandwidth of up to 50% in the hot cache case and up to 15% in the cold cache case. On Power6 we get memory bandwidth results that are up to three times faster in the hot cache case and up to 50% faster in the cold cache case. Commit 2a9294369bd020db89bfdf78b84c3615b39a5c84 ("powerpc: Add new CPU feature: CPU_FTR_CP_USE_DCBTZ") was where CPU_FTR_CP_USE_DCBTZ was added. To say that Cell gets its best performance in memcpy() with just the destination aligned is true but only for the reason that the indirect shift and rotate instructions, sld and srd, are microcoded on Cell. This means that either the destination or the source can be aligned, but not both, and seeing as we get better performance with the destination aligned we choose this option. While we're at it make a one line change from cmpldi r1,... to cmpldi cr1,... for consistency. Signed-off-by: Mark Nelson <markn@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-27 08:46:51 +08:00
BEGIN_FTR_SECTION
andi. r0,r4,7
bne .Lsrc_unaligned
powerpc: Update 64bit memcpy() using CPU_FTR_UNALIGNED_LD_STD Update memcpy() to add two new feature sections: one for aligning the destination before copying and one for copying using aligned load and store doubles. These new feature sections will only affect Power6 and Cell because the CPU feature bit was only added to these two processors. Power6 gets its best performance in memcpy() when aligning neither the source nor the destination, while Cell gets its best performance when just the destination is aligned. But in order to save on CPU feature bits we can use the previously added CPU_FTR_CP_USE_DCBTZ feature bit to differentiate between Power6 and Cell (because CPU_FTR_CP_USE_DCBTZ was added to Cell but not Power6). The first feature section acts to nop out the branch that takes us to the code that aligns us to an eight byte boundary for the destination. We only want to nop out this branch on Power6. So the ALT_FTR_SECTION_END() for this feature section creates a test mask of the two feature bits ORed together and provides an expected result of just CPU_FTR_UNALIGNED_LD_STD, thus we nop out the branch if we're on a CPU that has CPU_FTR_UNALIGNED_LD_STD set and CPU_FTR_CP_USE_DCBTZ unset. For the second feature section added, if we're on a CPU that has the CPU_FTR_UNALIGNED_LD_STD bit set then we don't want to do the copy with aligned loads and stores (and the appropriate shifting left and right instructions), so we want to nop out the branch to .Lsrc_unaligned. The andi. used for this branch is moved to just above the branch because this allows us to nop out both instructions with just one feature section which gives us better performance and doesn't hurt readability which two separate feature sections did. Moving the andi. to just above the branch doesn't have any noticeable negative effect on the remaining 64bit processors (the ones that didn't have this feature bit added). On Cell this simple modification results in an improvement to measured memcpy() bandwidth of up to 50% in the hot cache case and up to 15% in the cold cache case. On Power6 we get memory bandwidth results that are up to three times faster in the hot cache case and up to 50% faster in the cold cache case. Commit 2a9294369bd020db89bfdf78b84c3615b39a5c84 ("powerpc: Add new CPU feature: CPU_FTR_CP_USE_DCBTZ") was where CPU_FTR_CP_USE_DCBTZ was added. To say that Cell gets its best performance in memcpy() with just the destination aligned is true but only for the reason that the indirect shift and rotate instructions, sld and srd, are microcoded on Cell. This means that either the destination or the source can be aligned, but not both, and seeing as we get better performance with the destination aligned we choose this option. While we're at it make a one line change from cmpldi r1,... to cmpldi cr1,... for consistency. Signed-off-by: Mark Nelson <markn@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-27 08:46:51 +08:00
END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD)
srdi r7,r5,4
ld r9,0(r4)
addi r4,r4,-8
mtctr r7
andi. r5,r5,7
bf cr7*4+0,2f
addi r3,r3,8
addi r4,r4,8
mr r8,r9
blt cr1,3f
1: ld r9,8(r4)
std r8,8(r3)
2: ldu r8,16(r4)
stdu r9,16(r3)
bdnz 1b
3: std r8,8(r3)
beq 3f
addi r3,r3,16
.Ldo_tail:
bf cr7*4+1,1f
powerpc: Fix 64bit memcpy() regression This fixes a regression introduced by commit 25d6e2d7c58ddc4a3b614fc5381591c0cfe66556 ("powerpc: Update 64bit memcpy() using CPU_FTR_UNALIGNED_LD_STD"). This commit allowed CPUs that have the CPU_FTR_UNALIGNED_LD_STD CPU feature bit present to do the memcpy() with unaligned load doubles. But, along with this came a bug where our final load double would read bytes beyond a page boundary and into the next (unmapped) page. This was caught by enabling CONFIG_DEBUG_PAGEALLOC, The fix was to read only the number of bytes that we need to store rather than reading a full 8-byte doubleword and storing only a portion of that. In order to minimise the amount of existing code touched we use the original do_tail for the src_unaligned case. Below is an example of the regression, as reported by Sachin Sant: Unable to handle kernel paging request for data at address 0xc00000003f380000 Faulting instruction address: 0xc000000000039574 cpu 0x1: Vector: 300 (Data Access) at [c00000003baf3020] pc: c000000000039574: .memcpy+0x74/0x244 lr: d00000000244916c: .ext3_xattr_get+0x288/0x2f4 [ext3] sp: c00000003baf32a0 msr: 8000000000009032 dar: c00000003f380000 dsisr: 40000000 current = 0xc00000003e54b010 paca = 0xc000000000a53680 pid = 1840, comm = readahead enter ? for help [link register ] d00000000244916c .ext3_xattr_get+0x288/0x2f4 [ext3] [c00000003baf32a0] d000000002449104 .ext3_xattr_get+0x220/0x2f4 [ext3] (unreliab le) [c00000003baf3390] d00000000244a6e8 .ext3_xattr_security_get+0x40/0x5c [ext3] [c00000003baf3400] c000000000148154 .generic_getxattr+0x74/0x9c [c00000003baf34a0] c000000000333400 .inode_doinit_with_dentry+0x1c4/0x678 [c00000003baf3560] c00000000032c6b0 .security_d_instantiate+0x50/0x68 [c00000003baf35e0] c00000000013c818 .d_instantiate+0x78/0x9c [c00000003baf3680] c00000000013ced0 .d_splice_alias+0xf0/0x120 [c00000003baf3720] d00000000243e05c .ext3_lookup+0xec/0x134 [ext3] [c00000003baf37c0] c000000000131e74 .do_lookup+0x110/0x260 [c00000003baf3880] c000000000134ed0 .__link_path_walk+0xa98/0x1010 [c00000003baf3970] c0000000001354a0 .path_walk+0x58/0xc4 [c00000003baf3a20] c000000000135720 .do_path_lookup+0x138/0x1e4 [c00000003baf3ad0] c00000000013645c .path_lookup_open+0x6c/0xc8 [c00000003baf3b70] c000000000136780 .do_filp_open+0xcc/0x874 [c00000003baf3d10] c0000000001251e0 .do_sys_open+0x80/0x140 [c00000003baf3dc0] c00000000016aaec .compat_sys_open+0x24/0x38 [c00000003baf3e30] c00000000000855c syscall_exit+0x0/0x40 Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-25 21:26:48 +08:00
lwz r9,8(r4)
addi r4,r4,4
stw r9,0(r3)
addi r3,r3,4
1: bf cr7*4+2,2f
powerpc: Fix 64bit memcpy() regression This fixes a regression introduced by commit 25d6e2d7c58ddc4a3b614fc5381591c0cfe66556 ("powerpc: Update 64bit memcpy() using CPU_FTR_UNALIGNED_LD_STD"). This commit allowed CPUs that have the CPU_FTR_UNALIGNED_LD_STD CPU feature bit present to do the memcpy() with unaligned load doubles. But, along with this came a bug where our final load double would read bytes beyond a page boundary and into the next (unmapped) page. This was caught by enabling CONFIG_DEBUG_PAGEALLOC, The fix was to read only the number of bytes that we need to store rather than reading a full 8-byte doubleword and storing only a portion of that. In order to minimise the amount of existing code touched we use the original do_tail for the src_unaligned case. Below is an example of the regression, as reported by Sachin Sant: Unable to handle kernel paging request for data at address 0xc00000003f380000 Faulting instruction address: 0xc000000000039574 cpu 0x1: Vector: 300 (Data Access) at [c00000003baf3020] pc: c000000000039574: .memcpy+0x74/0x244 lr: d00000000244916c: .ext3_xattr_get+0x288/0x2f4 [ext3] sp: c00000003baf32a0 msr: 8000000000009032 dar: c00000003f380000 dsisr: 40000000 current = 0xc00000003e54b010 paca = 0xc000000000a53680 pid = 1840, comm = readahead enter ? for help [link register ] d00000000244916c .ext3_xattr_get+0x288/0x2f4 [ext3] [c00000003baf32a0] d000000002449104 .ext3_xattr_get+0x220/0x2f4 [ext3] (unreliab le) [c00000003baf3390] d00000000244a6e8 .ext3_xattr_security_get+0x40/0x5c [ext3] [c00000003baf3400] c000000000148154 .generic_getxattr+0x74/0x9c [c00000003baf34a0] c000000000333400 .inode_doinit_with_dentry+0x1c4/0x678 [c00000003baf3560] c00000000032c6b0 .security_d_instantiate+0x50/0x68 [c00000003baf35e0] c00000000013c818 .d_instantiate+0x78/0x9c [c00000003baf3680] c00000000013ced0 .d_splice_alias+0xf0/0x120 [c00000003baf3720] d00000000243e05c .ext3_lookup+0xec/0x134 [ext3] [c00000003baf37c0] c000000000131e74 .do_lookup+0x110/0x260 [c00000003baf3880] c000000000134ed0 .__link_path_walk+0xa98/0x1010 [c00000003baf3970] c0000000001354a0 .path_walk+0x58/0xc4 [c00000003baf3a20] c000000000135720 .do_path_lookup+0x138/0x1e4 [c00000003baf3ad0] c00000000013645c .path_lookup_open+0x6c/0xc8 [c00000003baf3b70] c000000000136780 .do_filp_open+0xcc/0x874 [c00000003baf3d10] c0000000001251e0 .do_sys_open+0x80/0x140 [c00000003baf3dc0] c00000000016aaec .compat_sys_open+0x24/0x38 [c00000003baf3e30] c00000000000855c syscall_exit+0x0/0x40 Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-25 21:26:48 +08:00
lhz r9,8(r4)
addi r4,r4,2
sth r9,0(r3)
addi r3,r3,2
2: bf cr7*4+3,3f
powerpc: Fix 64bit memcpy() regression This fixes a regression introduced by commit 25d6e2d7c58ddc4a3b614fc5381591c0cfe66556 ("powerpc: Update 64bit memcpy() using CPU_FTR_UNALIGNED_LD_STD"). This commit allowed CPUs that have the CPU_FTR_UNALIGNED_LD_STD CPU feature bit present to do the memcpy() with unaligned load doubles. But, along with this came a bug where our final load double would read bytes beyond a page boundary and into the next (unmapped) page. This was caught by enabling CONFIG_DEBUG_PAGEALLOC, The fix was to read only the number of bytes that we need to store rather than reading a full 8-byte doubleword and storing only a portion of that. In order to minimise the amount of existing code touched we use the original do_tail for the src_unaligned case. Below is an example of the regression, as reported by Sachin Sant: Unable to handle kernel paging request for data at address 0xc00000003f380000 Faulting instruction address: 0xc000000000039574 cpu 0x1: Vector: 300 (Data Access) at [c00000003baf3020] pc: c000000000039574: .memcpy+0x74/0x244 lr: d00000000244916c: .ext3_xattr_get+0x288/0x2f4 [ext3] sp: c00000003baf32a0 msr: 8000000000009032 dar: c00000003f380000 dsisr: 40000000 current = 0xc00000003e54b010 paca = 0xc000000000a53680 pid = 1840, comm = readahead enter ? for help [link register ] d00000000244916c .ext3_xattr_get+0x288/0x2f4 [ext3] [c00000003baf32a0] d000000002449104 .ext3_xattr_get+0x220/0x2f4 [ext3] (unreliab le) [c00000003baf3390] d00000000244a6e8 .ext3_xattr_security_get+0x40/0x5c [ext3] [c00000003baf3400] c000000000148154 .generic_getxattr+0x74/0x9c [c00000003baf34a0] c000000000333400 .inode_doinit_with_dentry+0x1c4/0x678 [c00000003baf3560] c00000000032c6b0 .security_d_instantiate+0x50/0x68 [c00000003baf35e0] c00000000013c818 .d_instantiate+0x78/0x9c [c00000003baf3680] c00000000013ced0 .d_splice_alias+0xf0/0x120 [c00000003baf3720] d00000000243e05c .ext3_lookup+0xec/0x134 [ext3] [c00000003baf37c0] c000000000131e74 .do_lookup+0x110/0x260 [c00000003baf3880] c000000000134ed0 .__link_path_walk+0xa98/0x1010 [c00000003baf3970] c0000000001354a0 .path_walk+0x58/0xc4 [c00000003baf3a20] c000000000135720 .do_path_lookup+0x138/0x1e4 [c00000003baf3ad0] c00000000013645c .path_lookup_open+0x6c/0xc8 [c00000003baf3b70] c000000000136780 .do_filp_open+0xcc/0x874 [c00000003baf3d10] c0000000001251e0 .do_sys_open+0x80/0x140 [c00000003baf3dc0] c00000000016aaec .compat_sys_open+0x24/0x38 [c00000003baf3e30] c00000000000855c syscall_exit+0x0/0x40 Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-25 21:26:48 +08:00
lbz r9,8(r4)
stb r9,0(r3)
3: ld r3,48(r1) /* return dest pointer */
blr
.Lsrc_unaligned:
srdi r6,r5,3
addi r5,r5,-16
subf r4,r0,r4
srdi r7,r5,4
sldi r10,r0,3
cmpdi cr6,r6,3
andi. r5,r5,7
mtctr r7
subfic r11,r10,64
add r5,r5,r0
bt cr7*4+0,0f
ld r9,0(r4) # 3+2n loads, 2+2n stores
ld r0,8(r4)
sld r6,r9,r10
ldu r9,16(r4)
srd r7,r0,r11
sld r8,r0,r10
or r7,r7,r6
blt cr6,4f
ld r0,8(r4)
# s1<< in r8, d0=(s0<<|s1>>) in r7, s3 in r0, s2 in r9, nix in r6 & r12
b 2f
0: ld r0,0(r4) # 4+2n loads, 3+2n stores
ldu r9,8(r4)
sld r8,r0,r10
addi r3,r3,-8
blt cr6,5f
ld r0,8(r4)
srd r12,r9,r11
sld r6,r9,r10
ldu r9,16(r4)
or r12,r8,r12
srd r7,r0,r11
sld r8,r0,r10
addi r3,r3,16
beq cr6,3f
# d0=(s0<<|s1>>) in r12, s1<< in r6, s2>> in r7, s2<< in r8, s3 in r9
1: or r7,r7,r6
ld r0,8(r4)
std r12,8(r3)
2: srd r12,r9,r11
sld r6,r9,r10
ldu r9,16(r4)
or r12,r8,r12
stdu r7,16(r3)
srd r7,r0,r11
sld r8,r0,r10
bdnz 1b
3: std r12,8(r3)
or r7,r7,r6
4: std r7,16(r3)
5: srd r12,r9,r11
or r12,r8,r12
std r12,24(r3)
beq 4f
cmpwi cr1,r5,8
addi r3,r3,32
sld r9,r9,r10
powerpc: Fix 64bit memcpy() regression This fixes a regression introduced by commit 25d6e2d7c58ddc4a3b614fc5381591c0cfe66556 ("powerpc: Update 64bit memcpy() using CPU_FTR_UNALIGNED_LD_STD"). This commit allowed CPUs that have the CPU_FTR_UNALIGNED_LD_STD CPU feature bit present to do the memcpy() with unaligned load doubles. But, along with this came a bug where our final load double would read bytes beyond a page boundary and into the next (unmapped) page. This was caught by enabling CONFIG_DEBUG_PAGEALLOC, The fix was to read only the number of bytes that we need to store rather than reading a full 8-byte doubleword and storing only a portion of that. In order to minimise the amount of existing code touched we use the original do_tail for the src_unaligned case. Below is an example of the regression, as reported by Sachin Sant: Unable to handle kernel paging request for data at address 0xc00000003f380000 Faulting instruction address: 0xc000000000039574 cpu 0x1: Vector: 300 (Data Access) at [c00000003baf3020] pc: c000000000039574: .memcpy+0x74/0x244 lr: d00000000244916c: .ext3_xattr_get+0x288/0x2f4 [ext3] sp: c00000003baf32a0 msr: 8000000000009032 dar: c00000003f380000 dsisr: 40000000 current = 0xc00000003e54b010 paca = 0xc000000000a53680 pid = 1840, comm = readahead enter ? for help [link register ] d00000000244916c .ext3_xattr_get+0x288/0x2f4 [ext3] [c00000003baf32a0] d000000002449104 .ext3_xattr_get+0x220/0x2f4 [ext3] (unreliab le) [c00000003baf3390] d00000000244a6e8 .ext3_xattr_security_get+0x40/0x5c [ext3] [c00000003baf3400] c000000000148154 .generic_getxattr+0x74/0x9c [c00000003baf34a0] c000000000333400 .inode_doinit_with_dentry+0x1c4/0x678 [c00000003baf3560] c00000000032c6b0 .security_d_instantiate+0x50/0x68 [c00000003baf35e0] c00000000013c818 .d_instantiate+0x78/0x9c [c00000003baf3680] c00000000013ced0 .d_splice_alias+0xf0/0x120 [c00000003baf3720] d00000000243e05c .ext3_lookup+0xec/0x134 [ext3] [c00000003baf37c0] c000000000131e74 .do_lookup+0x110/0x260 [c00000003baf3880] c000000000134ed0 .__link_path_walk+0xa98/0x1010 [c00000003baf3970] c0000000001354a0 .path_walk+0x58/0xc4 [c00000003baf3a20] c000000000135720 .do_path_lookup+0x138/0x1e4 [c00000003baf3ad0] c00000000013645c .path_lookup_open+0x6c/0xc8 [c00000003baf3b70] c000000000136780 .do_filp_open+0xcc/0x874 [c00000003baf3d10] c0000000001251e0 .do_sys_open+0x80/0x140 [c00000003baf3dc0] c00000000016aaec .compat_sys_open+0x24/0x38 [c00000003baf3e30] c00000000000855c syscall_exit+0x0/0x40 Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-25 21:26:48 +08:00
ble cr1,6f
ld r0,8(r4)
srd r7,r0,r11
or r9,r7,r9
powerpc: Fix 64bit memcpy() regression This fixes a regression introduced by commit 25d6e2d7c58ddc4a3b614fc5381591c0cfe66556 ("powerpc: Update 64bit memcpy() using CPU_FTR_UNALIGNED_LD_STD"). This commit allowed CPUs that have the CPU_FTR_UNALIGNED_LD_STD CPU feature bit present to do the memcpy() with unaligned load doubles. But, along with this came a bug where our final load double would read bytes beyond a page boundary and into the next (unmapped) page. This was caught by enabling CONFIG_DEBUG_PAGEALLOC, The fix was to read only the number of bytes that we need to store rather than reading a full 8-byte doubleword and storing only a portion of that. In order to minimise the amount of existing code touched we use the original do_tail for the src_unaligned case. Below is an example of the regression, as reported by Sachin Sant: Unable to handle kernel paging request for data at address 0xc00000003f380000 Faulting instruction address: 0xc000000000039574 cpu 0x1: Vector: 300 (Data Access) at [c00000003baf3020] pc: c000000000039574: .memcpy+0x74/0x244 lr: d00000000244916c: .ext3_xattr_get+0x288/0x2f4 [ext3] sp: c00000003baf32a0 msr: 8000000000009032 dar: c00000003f380000 dsisr: 40000000 current = 0xc00000003e54b010 paca = 0xc000000000a53680 pid = 1840, comm = readahead enter ? for help [link register ] d00000000244916c .ext3_xattr_get+0x288/0x2f4 [ext3] [c00000003baf32a0] d000000002449104 .ext3_xattr_get+0x220/0x2f4 [ext3] (unreliab le) [c00000003baf3390] d00000000244a6e8 .ext3_xattr_security_get+0x40/0x5c [ext3] [c00000003baf3400] c000000000148154 .generic_getxattr+0x74/0x9c [c00000003baf34a0] c000000000333400 .inode_doinit_with_dentry+0x1c4/0x678 [c00000003baf3560] c00000000032c6b0 .security_d_instantiate+0x50/0x68 [c00000003baf35e0] c00000000013c818 .d_instantiate+0x78/0x9c [c00000003baf3680] c00000000013ced0 .d_splice_alias+0xf0/0x120 [c00000003baf3720] d00000000243e05c .ext3_lookup+0xec/0x134 [ext3] [c00000003baf37c0] c000000000131e74 .do_lookup+0x110/0x260 [c00000003baf3880] c000000000134ed0 .__link_path_walk+0xa98/0x1010 [c00000003baf3970] c0000000001354a0 .path_walk+0x58/0xc4 [c00000003baf3a20] c000000000135720 .do_path_lookup+0x138/0x1e4 [c00000003baf3ad0] c00000000013645c .path_lookup_open+0x6c/0xc8 [c00000003baf3b70] c000000000136780 .do_filp_open+0xcc/0x874 [c00000003baf3d10] c0000000001251e0 .do_sys_open+0x80/0x140 [c00000003baf3dc0] c00000000016aaec .compat_sys_open+0x24/0x38 [c00000003baf3e30] c00000000000855c syscall_exit+0x0/0x40 Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-02-25 21:26:48 +08:00
6:
bf cr7*4+1,1f
rotldi r9,r9,32
stw r9,0(r3)
addi r3,r3,4
1: bf cr7*4+2,2f
rotldi r9,r9,16
sth r9,0(r3)
addi r3,r3,2
2: bf cr7*4+3,3f
rotldi r9,r9,8
stb r9,0(r3)
3: ld r3,48(r1) /* return dest pointer */
blr
.Ldst_unaligned:
PPC_MTOCRF 0x01,r6 # put #bytes to 8B bdry into cr7
subf r5,r6,r5
li r7,0
powerpc: Update 64bit memcpy() using CPU_FTR_UNALIGNED_LD_STD Update memcpy() to add two new feature sections: one for aligning the destination before copying and one for copying using aligned load and store doubles. These new feature sections will only affect Power6 and Cell because the CPU feature bit was only added to these two processors. Power6 gets its best performance in memcpy() when aligning neither the source nor the destination, while Cell gets its best performance when just the destination is aligned. But in order to save on CPU feature bits we can use the previously added CPU_FTR_CP_USE_DCBTZ feature bit to differentiate between Power6 and Cell (because CPU_FTR_CP_USE_DCBTZ was added to Cell but not Power6). The first feature section acts to nop out the branch that takes us to the code that aligns us to an eight byte boundary for the destination. We only want to nop out this branch on Power6. So the ALT_FTR_SECTION_END() for this feature section creates a test mask of the two feature bits ORed together and provides an expected result of just CPU_FTR_UNALIGNED_LD_STD, thus we nop out the branch if we're on a CPU that has CPU_FTR_UNALIGNED_LD_STD set and CPU_FTR_CP_USE_DCBTZ unset. For the second feature section added, if we're on a CPU that has the CPU_FTR_UNALIGNED_LD_STD bit set then we don't want to do the copy with aligned loads and stores (and the appropriate shifting left and right instructions), so we want to nop out the branch to .Lsrc_unaligned. The andi. used for this branch is moved to just above the branch because this allows us to nop out both instructions with just one feature section which gives us better performance and doesn't hurt readability which two separate feature sections did. Moving the andi. to just above the branch doesn't have any noticeable negative effect on the remaining 64bit processors (the ones that didn't have this feature bit added). On Cell this simple modification results in an improvement to measured memcpy() bandwidth of up to 50% in the hot cache case and up to 15% in the cold cache case. On Power6 we get memory bandwidth results that are up to three times faster in the hot cache case and up to 50% faster in the cold cache case. Commit 2a9294369bd020db89bfdf78b84c3615b39a5c84 ("powerpc: Add new CPU feature: CPU_FTR_CP_USE_DCBTZ") was where CPU_FTR_CP_USE_DCBTZ was added. To say that Cell gets its best performance in memcpy() with just the destination aligned is true but only for the reason that the indirect shift and rotate instructions, sld and srd, are microcoded on Cell. This means that either the destination or the source can be aligned, but not both, and seeing as we get better performance with the destination aligned we choose this option. While we're at it make a one line change from cmpldi r1,... to cmpldi cr1,... for consistency. Signed-off-by: Mark Nelson <markn@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-27 08:46:51 +08:00
cmpldi cr1,r5,16
bf cr7*4+3,1f
lbz r0,0(r4)
stb r0,0(r3)
addi r7,r7,1
1: bf cr7*4+2,2f
lhzx r0,r7,r4
sthx r0,r7,r3
addi r7,r7,2
2: bf cr7*4+1,3f
lwzx r0,r7,r4
stwx r0,r7,r3
3: PPC_MTOCRF 0x01,r5
add r4,r6,r4
add r3,r6,r3
b .Ldst_aligned
.Lshort_copy:
bf cr7*4+0,1f
lwz r0,0(r4)
lwz r9,4(r4)
addi r4,r4,8
stw r0,0(r3)
stw r9,4(r3)
addi r3,r3,8
1: bf cr7*4+1,2f
lwz r0,0(r4)
addi r4,r4,4
stw r0,0(r3)
addi r3,r3,4
2: bf cr7*4+2,3f
lhz r0,0(r4)
addi r4,r4,2
sth r0,0(r3)
addi r3,r3,2
3: bf cr7*4+3,4f
lbz r0,0(r4)
stb r0,0(r3)
4: ld r3,48(r1) /* return dest pointer */
blr