hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
linux-sg2042/drivers/pci/pcie/Makefile

20 lines
434 B
Makefile
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#
# Makefile for PCI-Express PORT Driver
#
PCI: add PCI Express ASPM support PCI Express ASPM defines a protocol for PCI Express components in the D0 state to reduce Link power by placing their Links into a low power state and instructing the other end of the Link to do likewise. This capability allows hardware-autonomous, dynamic Link power reduction beyond what is achievable by software-only controlled power management. However, The device should be configured by software appropriately. Enabling ASPM will save power, but will introduce device latency. This patch adds ASPM support in Linux. It introduces a global policy for ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control it. The interface can be used as a boot option too. Currently we have below setting: -default, BIOS default setting -powersave, highest power saving mode, enable all available ASPM state and clock power management -performance, highest performance, disable ASPM and clock power management By default, the 'default' policy is used currently. In my test, power difference between powersave mode and performance mode is about 1.3w in a system with 3 PCIE links. Note: some devices might not work well with aspm, either because chipset issue or device issue. The patch provide API (pci_disable_link_state), driver can disable ASPM for specific device. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-25 09:46:41 +08:00
# Build PCI Express ASPM if needed
obj-$(CONFIG_PCIEASPM) += aspm.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
pcieportdrv-y := portdrv_core.o portdrv_pci.o portdrv_bus.o
PCI: PCIe: Ask BIOS for control of all native services at once After commit 852972acff8f10f3a15679be2059bb94916cba5d (ACPI: Disable ASPM if the platform won't provide _OSC control for PCIe) control of the PCIe Capability Structure is unconditionally requested by acpi_pci_root_add(), which in principle may cause problems to happen in two ways. First, the BIOS may refuse to give control of the PCIe Capability Structure if it is not asked for any of the _OSC features depending on it at the same time. Second, the BIOS may assume that control of the _OSC features depending on the PCIe Capability Structure will be requested in the future and may behave incorrectly if that doesn't happen. For this reason, control of the PCIe Capability Structure should always be requested along with control of any other _OSC features that may depend on it (ie. PCIe native PME, PCIe native hot-plug, PCIe AER). Rework the PCIe port driver so that (1) it checks which native PCIe port services can be enabled, according to the BIOS, and (2) it requests control of all these services simultaneously. In particular, this causes pcie_portdrv_probe() to fail if the BIOS refuses to grant control of the PCIe Capability Structure, which means that no native PCIe port services can be enabled for the PCIe Root Complex the given port belongs to. If that happens, ASPM is disabled to avoid problems with mishandling it by the part of the PCIe hierarchy for which control of the PCIe Capability Structure has not been received. Make it possible to override this behavior using 'pcie_ports=native' (use the PCIe native services regardless of the BIOS response to the control request), or 'pcie_ports=compat' (do not use the PCIe native services at all). Accordingly, rework the existing PCIe port service drivers so that they don't request control of the services directly. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-08-22 04:02:38 +08:00
pcieportdrv-$(CONFIG_ACPI) += portdrv_acpi.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
obj-$(CONFIG_PCIEPORTBUS) += pcieportdrv.o
PCI-Express AER implemetation: AER core and aerdriver Patch 3 implements the core part of PCI-Express AER and aerdrv port service driver. When a root port service device is probed, the aerdrv will call request_irq to register irq handler for AER error interrupt. When a device sends an PCI-Express error message to the root port, the root port will trigger an interrupt, by either MSI or IO-APIC, then kernel would run the irq handler. The handler collects root error status register and schedules a work. The work will call the core part to process the error based on its type (Correctable/non-fatal/fatal). As for Correctable errors, the patch chooses to just clear the correctable error status register of the device. As for the non-fatal error, the patch follows generic PCI error handler rules to call the error callback functions of the endpoint's driver. If the device is a bridge, the patch chooses to broadcast the error to downstream devices. As for the fatal error, the patch resets the pci-express link and follows generic PCI error handler rules to call the error callback functions of the endpoint's driver. If the device is a bridge, the patch chooses to broadcast the error to downstream devices. Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-31 15:21:33 +08:00
# Build PCI Express AER if needed
obj-$(CONFIG_PCIEAER) += aer/
PCI PM: PCIe PME root port service driver PCIe native PME detection mechanism is based on interrupts generated by root ports or event collectors every time a PCIe device sends a PME message upstream. Once a PME message has been sent by an endpoint device and received by its root port (or event collector in the case of root complex integrated endpoints), the Requester ID from the message header is registered in the root port's Root Status register. At the same time, the PME Status bit of the Root Status register is set to indicate that there's a PME to handle. If PCIe PME interrupt is enabled for the root port, it generates an interrupt once the PME Status has been set. After receiving the interrupt, the kernel can identify the PCIe device that generated the PME using the Requester ID from the root port's Root Status register. [For details, see PCI Express Base Specification, Rev. 2.0.] Implement a driver for the PCIe PME root port service working in accordance with the above description. Based on a patch from Shaohua Li <shaohua.li@intel.com>. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-18 06:39:08 +08:00
PCI: PCIe: Move PCIe PME code to the pcie directory The PCIe PME code only consists of one file, so it doesn't need to occupy its own directory. Move it to drivers/pci/pcie/pme.c and remove the contents of drivers/pci/pcie/pme . Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-08-21 07:58:22 +08:00
obj-$(CONFIG_PCIE_PME) += pme.o
PCI: Add Downstream Port Containment driver Add driver for the PCI Express Downstream Port Containment extended capability. DPC is an optional capability to contain uncorrectable errors below a port. For more information on DPC, please see PCI Express Base Specification Revision 4, section 7.31, or view the PCI-SIG DPC ECN here: https://pcisig.com/sites/default/files/specification_documents/ECN_DPC_2012-02-09_finalized.pdf When a DPC event is triggered, the hardware disables downstream links, so the DPC driver schedules removal for all devices below this port. This may happen concurrently with a PCIe hotplug driver if enabled. When all downstream devices are removed and the link state transitions to disabled, the DPC driver clears the DPC status and interrupt bits so the link may retrain for a newly connected device. [bhelgaas: clear (not set) DPC_CTL bits on remove, whitespace cleanup] Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Lukas Wunner <lukas@wunner.de>
2016-04-29 06:24:48 +08:00
obj-$(CONFIG_PCIE_DPC) += pcie-dpc.o
PCI: Add Precision Time Measurement (PTM) support Add Precision Time Measurement (PTM) support (see PCIe r3.1, sec 6.22). Enable PTM on PTM Root devices and switch ports. This does not enable PTM on endpoints. There currently are no PTM-capable devices on the market, but it is expected to be supported by the Intel Apollo Lake platform. [bhelgaas: complete rework] Signed-off-by: Jonathan Yong <jonathan.yong@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-06-12 03:13:38 +08:00
obj-$(CONFIG_PCIE_PTM) += ptm.o