linux-sg2042/arch/sparc/kernel/sun4d_irq.c

525 lines
12 KiB
C
Raw Normal View History

/*
* SS1000/SC2000 interrupt handling.
*
* Copyright (C) 1997,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
* Heavily based on arch/sparc/kernel/irq.c.
*/
#include <linux/kernel_stat.h>
#include <linux/seq_file.h>
#include <asm/timer.h>
#include <asm/traps.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/sbi.h>
#include <asm/cacheflush.h>
#include <asm/setup.h>
#include "kernel.h"
#include "irq.h"
/* Sun4d interrupts fall roughly into two categories. SBUS and
* cpu local. CPU local interrupts cover the timer interrupts
* and whatnot, and we encode those as normal PILs between
* 0 and 15.
sparc32: genirq support The conversion of sparc32 to genirq is based on original work done by David S. Miller. Daniel Hellstrom has helped in the conversion and implemented the shutdowm functionality. Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20 Test status: sun4c - not tested sun4m,pci - not tested sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20) sun4d - not tested leon - tested on various combinations of leon boards, including SMP variants generic Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW Allocate 64 IRQs - which is enough even for SS2000 Use a table of irq_bucket to maintain uses IRQs irq_bucket is also used to chain several irq's that must be called when the same intrrupt is asserted Use irq_link to link a interrupt source to the irq All plafforms must now supply their own build_device_irq method handler_irq rewriten to use generic irq support floppy Read FLOPPY_IRQ from platform device Use generic request_irq to register the floppy interrupt Rewrote sparc_floppy_irq to use the generic irq support pcic: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for pcic Use pcic_build_device_irq in pci_time_init allocate virtual irqs in pcic_fill_irq sun4c: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for sun4c Use sun4c_build_device_irq in sun4c_init_timers sun4m: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4m_handler_data that allow easy access to necessary data in the mask/unmask functions Add a helper method to enable profile_timer (used from smp) Added sun4m_build_device_irq Use sun4m_build_device_irq in sun4m_init_timers TODO: There is no replacement for smp_rotate that always scheduled next CPU as interrupt target upon an interrupt sun4d: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4d_handler_data that allow easy access to necessary data in mask/unmask fuctions Rewrote sun4d_handler_irq to use generic irq support TODO: The original implmentation of enable/disable had: if (irq < NR_IRQS) return; The new implmentation does not distingush between SBUS and cpu interrupts. I am no sure what is right here. I assume we need to do something for the cpu interrupts. I have not succeeded booting my sun4d box (with or without this patch) and my understanding of this platfrom is limited. So I would be a bit suprised if this works. leon: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for leon Use leon_build_device_irq in leon_init_timers Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Marcel van Nies <morcles@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18 19:25:44 +08:00
* SBUS interrupts are encodes as a combination of board, level and slot.
*/
sparc32: genirq support The conversion of sparc32 to genirq is based on original work done by David S. Miller. Daniel Hellstrom has helped in the conversion and implemented the shutdowm functionality. Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20 Test status: sun4c - not tested sun4m,pci - not tested sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20) sun4d - not tested leon - tested on various combinations of leon boards, including SMP variants generic Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW Allocate 64 IRQs - which is enough even for SS2000 Use a table of irq_bucket to maintain uses IRQs irq_bucket is also used to chain several irq's that must be called when the same intrrupt is asserted Use irq_link to link a interrupt source to the irq All plafforms must now supply their own build_device_irq method handler_irq rewriten to use generic irq support floppy Read FLOPPY_IRQ from platform device Use generic request_irq to register the floppy interrupt Rewrote sparc_floppy_irq to use the generic irq support pcic: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for pcic Use pcic_build_device_irq in pci_time_init allocate virtual irqs in pcic_fill_irq sun4c: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for sun4c Use sun4c_build_device_irq in sun4c_init_timers sun4m: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4m_handler_data that allow easy access to necessary data in the mask/unmask functions Add a helper method to enable profile_timer (used from smp) Added sun4m_build_device_irq Use sun4m_build_device_irq in sun4m_init_timers TODO: There is no replacement for smp_rotate that always scheduled next CPU as interrupt target upon an interrupt sun4d: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4d_handler_data that allow easy access to necessary data in mask/unmask fuctions Rewrote sun4d_handler_irq to use generic irq support TODO: The original implmentation of enable/disable had: if (irq < NR_IRQS) return; The new implmentation does not distingush between SBUS and cpu interrupts. I am no sure what is right here. I assume we need to do something for the cpu interrupts. I have not succeeded booting my sun4d box (with or without this patch) and my understanding of this platfrom is limited. So I would be a bit suprised if this works. leon: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for leon Use leon_build_device_irq in leon_init_timers Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Marcel van Nies <morcles@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18 19:25:44 +08:00
struct sun4d_handler_data {
unsigned int cpuid; /* target cpu */
unsigned int real_irq; /* interrupt level */
};
static unsigned int sun4d_encode_irq(int board, int lvl, int slot)
{
return (board + 1) << 5 | (lvl << 2) | slot;
}
struct sun4d_timer_regs {
u32 l10_timer_limit;
u32 l10_cur_countx;
u32 l10_limit_noclear;
u32 ctrl;
u32 l10_cur_count;
};
static struct sun4d_timer_regs __iomem *sun4d_timers;
sparc32: genirq support The conversion of sparc32 to genirq is based on original work done by David S. Miller. Daniel Hellstrom has helped in the conversion and implemented the shutdowm functionality. Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20 Test status: sun4c - not tested sun4m,pci - not tested sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20) sun4d - not tested leon - tested on various combinations of leon boards, including SMP variants generic Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW Allocate 64 IRQs - which is enough even for SS2000 Use a table of irq_bucket to maintain uses IRQs irq_bucket is also used to chain several irq's that must be called when the same intrrupt is asserted Use irq_link to link a interrupt source to the irq All plafforms must now supply their own build_device_irq method handler_irq rewriten to use generic irq support floppy Read FLOPPY_IRQ from platform device Use generic request_irq to register the floppy interrupt Rewrote sparc_floppy_irq to use the generic irq support pcic: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for pcic Use pcic_build_device_irq in pci_time_init allocate virtual irqs in pcic_fill_irq sun4c: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for sun4c Use sun4c_build_device_irq in sun4c_init_timers sun4m: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4m_handler_data that allow easy access to necessary data in the mask/unmask functions Add a helper method to enable profile_timer (used from smp) Added sun4m_build_device_irq Use sun4m_build_device_irq in sun4m_init_timers TODO: There is no replacement for smp_rotate that always scheduled next CPU as interrupt target upon an interrupt sun4d: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4d_handler_data that allow easy access to necessary data in mask/unmask fuctions Rewrote sun4d_handler_irq to use generic irq support TODO: The original implmentation of enable/disable had: if (irq < NR_IRQS) return; The new implmentation does not distingush between SBUS and cpu interrupts. I am no sure what is right here. I assume we need to do something for the cpu interrupts. I have not succeeded booting my sun4d box (with or without this patch) and my understanding of this platfrom is limited. So I would be a bit suprised if this works. leon: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for leon Use leon_build_device_irq in leon_init_timers Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Marcel van Nies <morcles@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18 19:25:44 +08:00
#define SUN4D_TIMER_IRQ 10
/* Specify which cpu handle interrupts from which board.
* Index is board - value is cpu.
*/
static unsigned char board_to_cpu[32];
static int pil_to_sbus[] = {
0,
0,
1,
2,
0,
3,
0,
4,
0,
5,
0,
6,
0,
7,
0,
0,
};
/* Exported for sun4d_smp.c */
DEFINE_SPINLOCK(sun4d_imsk_lock);
sparc32: genirq support The conversion of sparc32 to genirq is based on original work done by David S. Miller. Daniel Hellstrom has helped in the conversion and implemented the shutdowm functionality. Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20 Test status: sun4c - not tested sun4m,pci - not tested sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20) sun4d - not tested leon - tested on various combinations of leon boards, including SMP variants generic Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW Allocate 64 IRQs - which is enough even for SS2000 Use a table of irq_bucket to maintain uses IRQs irq_bucket is also used to chain several irq's that must be called when the same intrrupt is asserted Use irq_link to link a interrupt source to the irq All plafforms must now supply their own build_device_irq method handler_irq rewriten to use generic irq support floppy Read FLOPPY_IRQ from platform device Use generic request_irq to register the floppy interrupt Rewrote sparc_floppy_irq to use the generic irq support pcic: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for pcic Use pcic_build_device_irq in pci_time_init allocate virtual irqs in pcic_fill_irq sun4c: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for sun4c Use sun4c_build_device_irq in sun4c_init_timers sun4m: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4m_handler_data that allow easy access to necessary data in the mask/unmask functions Add a helper method to enable profile_timer (used from smp) Added sun4m_build_device_irq Use sun4m_build_device_irq in sun4m_init_timers TODO: There is no replacement for smp_rotate that always scheduled next CPU as interrupt target upon an interrupt sun4d: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4d_handler_data that allow easy access to necessary data in mask/unmask fuctions Rewrote sun4d_handler_irq to use generic irq support TODO: The original implmentation of enable/disable had: if (irq < NR_IRQS) return; The new implmentation does not distingush between SBUS and cpu interrupts. I am no sure what is right here. I assume we need to do something for the cpu interrupts. I have not succeeded booting my sun4d box (with or without this patch) and my understanding of this platfrom is limited. So I would be a bit suprised if this works. leon: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for leon Use leon_build_device_irq in leon_init_timers Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Marcel van Nies <morcles@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18 19:25:44 +08:00
/* SBUS interrupts are encoded integers including the board number
* (plus one), the SBUS level, and the SBUS slot number. Sun4D
* IRQ dispatch is done by:
*
* 1) Reading the BW local interrupt table in order to get the bus
* interrupt mask.
*
* This table is indexed by SBUS interrupt level which can be
* derived from the PIL we got interrupted on.
*
* 2) For each bus showing interrupt pending from #1, read the
* SBI interrupt state register. This will indicate which slots
* have interrupts pending for that SBUS interrupt level.
*
* 3) Call the genreric IRQ support.
*/
static void sun4d_sbus_handler_irq(int sbusl)
{
sparc32: genirq support The conversion of sparc32 to genirq is based on original work done by David S. Miller. Daniel Hellstrom has helped in the conversion and implemented the shutdowm functionality. Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20 Test status: sun4c - not tested sun4m,pci - not tested sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20) sun4d - not tested leon - tested on various combinations of leon boards, including SMP variants generic Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW Allocate 64 IRQs - which is enough even for SS2000 Use a table of irq_bucket to maintain uses IRQs irq_bucket is also used to chain several irq's that must be called when the same intrrupt is asserted Use irq_link to link a interrupt source to the irq All plafforms must now supply their own build_device_irq method handler_irq rewriten to use generic irq support floppy Read FLOPPY_IRQ from platform device Use generic request_irq to register the floppy interrupt Rewrote sparc_floppy_irq to use the generic irq support pcic: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for pcic Use pcic_build_device_irq in pci_time_init allocate virtual irqs in pcic_fill_irq sun4c: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for sun4c Use sun4c_build_device_irq in sun4c_init_timers sun4m: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4m_handler_data that allow easy access to necessary data in the mask/unmask functions Add a helper method to enable profile_timer (used from smp) Added sun4m_build_device_irq Use sun4m_build_device_irq in sun4m_init_timers TODO: There is no replacement for smp_rotate that always scheduled next CPU as interrupt target upon an interrupt sun4d: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4d_handler_data that allow easy access to necessary data in mask/unmask fuctions Rewrote sun4d_handler_irq to use generic irq support TODO: The original implmentation of enable/disable had: if (irq < NR_IRQS) return; The new implmentation does not distingush between SBUS and cpu interrupts. I am no sure what is right here. I assume we need to do something for the cpu interrupts. I have not succeeded booting my sun4d box (with or without this patch) and my understanding of this platfrom is limited. So I would be a bit suprised if this works. leon: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for leon Use leon_build_device_irq in leon_init_timers Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Marcel van Nies <morcles@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18 19:25:44 +08:00
unsigned int bus_mask;
unsigned int sbino, slot;
unsigned int sbil;
bus_mask = bw_get_intr_mask(sbusl) & 0x3ffff;
bw_clear_intr_mask(sbusl, bus_mask);
sbil = (sbusl << 2);
/* Loop for each pending SBI */
for (sbino = 0; bus_mask; sbino++, bus_mask >>= 1) {
sparc32: genirq support The conversion of sparc32 to genirq is based on original work done by David S. Miller. Daniel Hellstrom has helped in the conversion and implemented the shutdowm functionality. Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20 Test status: sun4c - not tested sun4m,pci - not tested sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20) sun4d - not tested leon - tested on various combinations of leon boards, including SMP variants generic Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW Allocate 64 IRQs - which is enough even for SS2000 Use a table of irq_bucket to maintain uses IRQs irq_bucket is also used to chain several irq's that must be called when the same intrrupt is asserted Use irq_link to link a interrupt source to the irq All plafforms must now supply their own build_device_irq method handler_irq rewriten to use generic irq support floppy Read FLOPPY_IRQ from platform device Use generic request_irq to register the floppy interrupt Rewrote sparc_floppy_irq to use the generic irq support pcic: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for pcic Use pcic_build_device_irq in pci_time_init allocate virtual irqs in pcic_fill_irq sun4c: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for sun4c Use sun4c_build_device_irq in sun4c_init_timers sun4m: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4m_handler_data that allow easy access to necessary data in the mask/unmask functions Add a helper method to enable profile_timer (used from smp) Added sun4m_build_device_irq Use sun4m_build_device_irq in sun4m_init_timers TODO: There is no replacement for smp_rotate that always scheduled next CPU as interrupt target upon an interrupt sun4d: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4d_handler_data that allow easy access to necessary data in mask/unmask fuctions Rewrote sun4d_handler_irq to use generic irq support TODO: The original implmentation of enable/disable had: if (irq < NR_IRQS) return; The new implmentation does not distingush between SBUS and cpu interrupts. I am no sure what is right here. I assume we need to do something for the cpu interrupts. I have not succeeded booting my sun4d box (with or without this patch) and my understanding of this platfrom is limited. So I would be a bit suprised if this works. leon: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for leon Use leon_build_device_irq in leon_init_timers Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Marcel van Nies <morcles@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18 19:25:44 +08:00
unsigned int idx, mask;
if (!(bus_mask & 1))
continue;
/* XXX This seems to ACK the irq twice. acquire_sbi()
* XXX uses swap, therefore this writes 0xf << sbil,
* XXX then later release_sbi() will write the individual
* XXX bits which were set again.
*/
mask = acquire_sbi(SBI2DEVID(sbino), 0xf << sbil);
mask &= (0xf << sbil);
/* Loop for each pending SBI slot */
slot = (1 << sbil);
for (idx = 0; mask != 0; idx++, slot <<= 1) {
sparc32: genirq support The conversion of sparc32 to genirq is based on original work done by David S. Miller. Daniel Hellstrom has helped in the conversion and implemented the shutdowm functionality. Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20 Test status: sun4c - not tested sun4m,pci - not tested sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20) sun4d - not tested leon - tested on various combinations of leon boards, including SMP variants generic Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW Allocate 64 IRQs - which is enough even for SS2000 Use a table of irq_bucket to maintain uses IRQs irq_bucket is also used to chain several irq's that must be called when the same intrrupt is asserted Use irq_link to link a interrupt source to the irq All plafforms must now supply their own build_device_irq method handler_irq rewriten to use generic irq support floppy Read FLOPPY_IRQ from platform device Use generic request_irq to register the floppy interrupt Rewrote sparc_floppy_irq to use the generic irq support pcic: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for pcic Use pcic_build_device_irq in pci_time_init allocate virtual irqs in pcic_fill_irq sun4c: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for sun4c Use sun4c_build_device_irq in sun4c_init_timers sun4m: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4m_handler_data that allow easy access to necessary data in the mask/unmask functions Add a helper method to enable profile_timer (used from smp) Added sun4m_build_device_irq Use sun4m_build_device_irq in sun4m_init_timers TODO: There is no replacement for smp_rotate that always scheduled next CPU as interrupt target upon an interrupt sun4d: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4d_handler_data that allow easy access to necessary data in mask/unmask fuctions Rewrote sun4d_handler_irq to use generic irq support TODO: The original implmentation of enable/disable had: if (irq < NR_IRQS) return; The new implmentation does not distingush between SBUS and cpu interrupts. I am no sure what is right here. I assume we need to do something for the cpu interrupts. I have not succeeded booting my sun4d box (with or without this patch) and my understanding of this platfrom is limited. So I would be a bit suprised if this works. leon: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for leon Use leon_build_device_irq in leon_init_timers Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Marcel van Nies <morcles@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18 19:25:44 +08:00
unsigned int pil;
struct irq_bucket *p;
if (!(mask & slot))
continue;
mask &= ~slot;
pil = sun4d_encode_irq(sbino, sbusl, idx);
sparc32: genirq support The conversion of sparc32 to genirq is based on original work done by David S. Miller. Daniel Hellstrom has helped in the conversion and implemented the shutdowm functionality. Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20 Test status: sun4c - not tested sun4m,pci - not tested sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20) sun4d - not tested leon - tested on various combinations of leon boards, including SMP variants generic Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW Allocate 64 IRQs - which is enough even for SS2000 Use a table of irq_bucket to maintain uses IRQs irq_bucket is also used to chain several irq's that must be called when the same intrrupt is asserted Use irq_link to link a interrupt source to the irq All plafforms must now supply their own build_device_irq method handler_irq rewriten to use generic irq support floppy Read FLOPPY_IRQ from platform device Use generic request_irq to register the floppy interrupt Rewrote sparc_floppy_irq to use the generic irq support pcic: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for pcic Use pcic_build_device_irq in pci_time_init allocate virtual irqs in pcic_fill_irq sun4c: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for sun4c Use sun4c_build_device_irq in sun4c_init_timers sun4m: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4m_handler_data that allow easy access to necessary data in the mask/unmask functions Add a helper method to enable profile_timer (used from smp) Added sun4m_build_device_irq Use sun4m_build_device_irq in sun4m_init_timers TODO: There is no replacement for smp_rotate that always scheduled next CPU as interrupt target upon an interrupt sun4d: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4d_handler_data that allow easy access to necessary data in mask/unmask fuctions Rewrote sun4d_handler_irq to use generic irq support TODO: The original implmentation of enable/disable had: if (irq < NR_IRQS) return; The new implmentation does not distingush between SBUS and cpu interrupts. I am no sure what is right here. I assume we need to do something for the cpu interrupts. I have not succeeded booting my sun4d box (with or without this patch) and my understanding of this platfrom is limited. So I would be a bit suprised if this works. leon: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for leon Use leon_build_device_irq in leon_init_timers Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Marcel van Nies <morcles@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18 19:25:44 +08:00
p = irq_map[pil];
while (p) {
struct irq_bucket *next;
next = p->next;
generic_handle_irq(p->irq);
p = next;
}
sparc32: genirq support The conversion of sparc32 to genirq is based on original work done by David S. Miller. Daniel Hellstrom has helped in the conversion and implemented the shutdowm functionality. Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20 Test status: sun4c - not tested sun4m,pci - not tested sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20) sun4d - not tested leon - tested on various combinations of leon boards, including SMP variants generic Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW Allocate 64 IRQs - which is enough even for SS2000 Use a table of irq_bucket to maintain uses IRQs irq_bucket is also used to chain several irq's that must be called when the same intrrupt is asserted Use irq_link to link a interrupt source to the irq All plafforms must now supply their own build_device_irq method handler_irq rewriten to use generic irq support floppy Read FLOPPY_IRQ from platform device Use generic request_irq to register the floppy interrupt Rewrote sparc_floppy_irq to use the generic irq support pcic: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for pcic Use pcic_build_device_irq in pci_time_init allocate virtual irqs in pcic_fill_irq sun4c: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for sun4c Use sun4c_build_device_irq in sun4c_init_timers sun4m: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4m_handler_data that allow easy access to necessary data in the mask/unmask functions Add a helper method to enable profile_timer (used from smp) Added sun4m_build_device_irq Use sun4m_build_device_irq in sun4m_init_timers TODO: There is no replacement for smp_rotate that always scheduled next CPU as interrupt target upon an interrupt sun4d: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4d_handler_data that allow easy access to necessary data in mask/unmask fuctions Rewrote sun4d_handler_irq to use generic irq support TODO: The original implmentation of enable/disable had: if (irq < NR_IRQS) return; The new implmentation does not distingush between SBUS and cpu interrupts. I am no sure what is right here. I assume we need to do something for the cpu interrupts. I have not succeeded booting my sun4d box (with or without this patch) and my understanding of this platfrom is limited. So I would be a bit suprised if this works. leon: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for leon Use leon_build_device_irq in leon_init_timers Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Marcel van Nies <morcles@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18 19:25:44 +08:00
release_sbi(SBI2DEVID(sbino), slot);
}
}
}
void sun4d_handler_irq(int pil, struct pt_regs *regs)
{
struct pt_regs *old_regs;
/* SBUS IRQ level (1 - 7) */
int sbusl = pil_to_sbus[pil];
/* FIXME: Is this necessary?? */
cc_get_ipen();
cc_set_iclr(1 << pil);
#ifdef CONFIG_SMP
/*
* Check IPI data structures after IRQ has been cleared. Hard and Soft
* IRQ can happen at the same time, so both cases are always handled.
*/
if (pil == SUN4D_IPI_IRQ)
sun4d_ipi_interrupt();
#endif
old_regs = set_irq_regs(regs);
irq_enter();
sparc32: genirq support The conversion of sparc32 to genirq is based on original work done by David S. Miller. Daniel Hellstrom has helped in the conversion and implemented the shutdowm functionality. Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20 Test status: sun4c - not tested sun4m,pci - not tested sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20) sun4d - not tested leon - tested on various combinations of leon boards, including SMP variants generic Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW Allocate 64 IRQs - which is enough even for SS2000 Use a table of irq_bucket to maintain uses IRQs irq_bucket is also used to chain several irq's that must be called when the same intrrupt is asserted Use irq_link to link a interrupt source to the irq All plafforms must now supply their own build_device_irq method handler_irq rewriten to use generic irq support floppy Read FLOPPY_IRQ from platform device Use generic request_irq to register the floppy interrupt Rewrote sparc_floppy_irq to use the generic irq support pcic: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for pcic Use pcic_build_device_irq in pci_time_init allocate virtual irqs in pcic_fill_irq sun4c: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for sun4c Use sun4c_build_device_irq in sun4c_init_timers sun4m: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4m_handler_data that allow easy access to necessary data in the mask/unmask functions Add a helper method to enable profile_timer (used from smp) Added sun4m_build_device_irq Use sun4m_build_device_irq in sun4m_init_timers TODO: There is no replacement for smp_rotate that always scheduled next CPU as interrupt target upon an interrupt sun4d: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4d_handler_data that allow easy access to necessary data in mask/unmask fuctions Rewrote sun4d_handler_irq to use generic irq support TODO: The original implmentation of enable/disable had: if (irq < NR_IRQS) return; The new implmentation does not distingush between SBUS and cpu interrupts. I am no sure what is right here. I assume we need to do something for the cpu interrupts. I have not succeeded booting my sun4d box (with or without this patch) and my understanding of this platfrom is limited. So I would be a bit suprised if this works. leon: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for leon Use leon_build_device_irq in leon_init_timers Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Marcel van Nies <morcles@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18 19:25:44 +08:00
if (sbusl == 0) {
/* cpu interrupt */
struct irq_bucket *p;
p = irq_map[pil];
while (p) {
struct irq_bucket *next;
next = p->next;
generic_handle_irq(p->irq);
p = next;
}
} else {
sparc32: genirq support The conversion of sparc32 to genirq is based on original work done by David S. Miller. Daniel Hellstrom has helped in the conversion and implemented the shutdowm functionality. Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20 Test status: sun4c - not tested sun4m,pci - not tested sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20) sun4d - not tested leon - tested on various combinations of leon boards, including SMP variants generic Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW Allocate 64 IRQs - which is enough even for SS2000 Use a table of irq_bucket to maintain uses IRQs irq_bucket is also used to chain several irq's that must be called when the same intrrupt is asserted Use irq_link to link a interrupt source to the irq All plafforms must now supply their own build_device_irq method handler_irq rewriten to use generic irq support floppy Read FLOPPY_IRQ from platform device Use generic request_irq to register the floppy interrupt Rewrote sparc_floppy_irq to use the generic irq support pcic: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for pcic Use pcic_build_device_irq in pci_time_init allocate virtual irqs in pcic_fill_irq sun4c: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for sun4c Use sun4c_build_device_irq in sun4c_init_timers sun4m: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4m_handler_data that allow easy access to necessary data in the mask/unmask functions Add a helper method to enable profile_timer (used from smp) Added sun4m_build_device_irq Use sun4m_build_device_irq in sun4m_init_timers TODO: There is no replacement for smp_rotate that always scheduled next CPU as interrupt target upon an interrupt sun4d: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4d_handler_data that allow easy access to necessary data in mask/unmask fuctions Rewrote sun4d_handler_irq to use generic irq support TODO: The original implmentation of enable/disable had: if (irq < NR_IRQS) return; The new implmentation does not distingush between SBUS and cpu interrupts. I am no sure what is right here. I assume we need to do something for the cpu interrupts. I have not succeeded booting my sun4d box (with or without this patch) and my understanding of this platfrom is limited. So I would be a bit suprised if this works. leon: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for leon Use leon_build_device_irq in leon_init_timers Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Marcel van Nies <morcles@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18 19:25:44 +08:00
/* SBUS interrupt */
sun4d_sbus_handler_irq(sbusl);
}
irq_exit();
set_irq_regs(old_regs);
}
sparc32: genirq support The conversion of sparc32 to genirq is based on original work done by David S. Miller. Daniel Hellstrom has helped in the conversion and implemented the shutdowm functionality. Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20 Test status: sun4c - not tested sun4m,pci - not tested sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20) sun4d - not tested leon - tested on various combinations of leon boards, including SMP variants generic Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW Allocate 64 IRQs - which is enough even for SS2000 Use a table of irq_bucket to maintain uses IRQs irq_bucket is also used to chain several irq's that must be called when the same intrrupt is asserted Use irq_link to link a interrupt source to the irq All plafforms must now supply their own build_device_irq method handler_irq rewriten to use generic irq support floppy Read FLOPPY_IRQ from platform device Use generic request_irq to register the floppy interrupt Rewrote sparc_floppy_irq to use the generic irq support pcic: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for pcic Use pcic_build_device_irq in pci_time_init allocate virtual irqs in pcic_fill_irq sun4c: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for sun4c Use sun4c_build_device_irq in sun4c_init_timers sun4m: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4m_handler_data that allow easy access to necessary data in the mask/unmask functions Add a helper method to enable profile_timer (used from smp) Added sun4m_build_device_irq Use sun4m_build_device_irq in sun4m_init_timers TODO: There is no replacement for smp_rotate that always scheduled next CPU as interrupt target upon an interrupt sun4d: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4d_handler_data that allow easy access to necessary data in mask/unmask fuctions Rewrote sun4d_handler_irq to use generic irq support TODO: The original implmentation of enable/disable had: if (irq < NR_IRQS) return; The new implmentation does not distingush between SBUS and cpu interrupts. I am no sure what is right here. I assume we need to do something for the cpu interrupts. I have not succeeded booting my sun4d box (with or without this patch) and my understanding of this platfrom is limited. So I would be a bit suprised if this works. leon: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for leon Use leon_build_device_irq in leon_init_timers Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Marcel van Nies <morcles@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18 19:25:44 +08:00
static void sun4d_mask_irq(struct irq_data *data)
{
sparc32: genirq support The conversion of sparc32 to genirq is based on original work done by David S. Miller. Daniel Hellstrom has helped in the conversion and implemented the shutdowm functionality. Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20 Test status: sun4c - not tested sun4m,pci - not tested sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20) sun4d - not tested leon - tested on various combinations of leon boards, including SMP variants generic Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW Allocate 64 IRQs - which is enough even for SS2000 Use a table of irq_bucket to maintain uses IRQs irq_bucket is also used to chain several irq's that must be called when the same intrrupt is asserted Use irq_link to link a interrupt source to the irq All plafforms must now supply their own build_device_irq method handler_irq rewriten to use generic irq support floppy Read FLOPPY_IRQ from platform device Use generic request_irq to register the floppy interrupt Rewrote sparc_floppy_irq to use the generic irq support pcic: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for pcic Use pcic_build_device_irq in pci_time_init allocate virtual irqs in pcic_fill_irq sun4c: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for sun4c Use sun4c_build_device_irq in sun4c_init_timers sun4m: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4m_handler_data that allow easy access to necessary data in the mask/unmask functions Add a helper method to enable profile_timer (used from smp) Added sun4m_build_device_irq Use sun4m_build_device_irq in sun4m_init_timers TODO: There is no replacement for smp_rotate that always scheduled next CPU as interrupt target upon an interrupt sun4d: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4d_handler_data that allow easy access to necessary data in mask/unmask fuctions Rewrote sun4d_handler_irq to use generic irq support TODO: The original implmentation of enable/disable had: if (irq < NR_IRQS) return; The new implmentation does not distingush between SBUS and cpu interrupts. I am no sure what is right here. I assume we need to do something for the cpu interrupts. I have not succeeded booting my sun4d box (with or without this patch) and my understanding of this platfrom is limited. So I would be a bit suprised if this works. leon: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for leon Use leon_build_device_irq in leon_init_timers Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Marcel van Nies <morcles@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18 19:25:44 +08:00
struct sun4d_handler_data *handler_data = data->handler_data;
unsigned int real_irq;
#ifdef CONFIG_SMP
int cpuid = handler_data->cpuid;
unsigned long flags;
sparc32: genirq support The conversion of sparc32 to genirq is based on original work done by David S. Miller. Daniel Hellstrom has helped in the conversion and implemented the shutdowm functionality. Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20 Test status: sun4c - not tested sun4m,pci - not tested sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20) sun4d - not tested leon - tested on various combinations of leon boards, including SMP variants generic Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW Allocate 64 IRQs - which is enough even for SS2000 Use a table of irq_bucket to maintain uses IRQs irq_bucket is also used to chain several irq's that must be called when the same intrrupt is asserted Use irq_link to link a interrupt source to the irq All plafforms must now supply their own build_device_irq method handler_irq rewriten to use generic irq support floppy Read FLOPPY_IRQ from platform device Use generic request_irq to register the floppy interrupt Rewrote sparc_floppy_irq to use the generic irq support pcic: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for pcic Use pcic_build_device_irq in pci_time_init allocate virtual irqs in pcic_fill_irq sun4c: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for sun4c Use sun4c_build_device_irq in sun4c_init_timers sun4m: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4m_handler_data that allow easy access to necessary data in the mask/unmask functions Add a helper method to enable profile_timer (used from smp) Added sun4m_build_device_irq Use sun4m_build_device_irq in sun4m_init_timers TODO: There is no replacement for smp_rotate that always scheduled next CPU as interrupt target upon an interrupt sun4d: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4d_handler_data that allow easy access to necessary data in mask/unmask fuctions Rewrote sun4d_handler_irq to use generic irq support TODO: The original implmentation of enable/disable had: if (irq < NR_IRQS) return; The new implmentation does not distingush between SBUS and cpu interrupts. I am no sure what is right here. I assume we need to do something for the cpu interrupts. I have not succeeded booting my sun4d box (with or without this patch) and my understanding of this platfrom is limited. So I would be a bit suprised if this works. leon: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for leon Use leon_build_device_irq in leon_init_timers Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Marcel van Nies <morcles@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18 19:25:44 +08:00
#endif
real_irq = handler_data->real_irq;
#ifdef CONFIG_SMP
spin_lock_irqsave(&sun4d_imsk_lock, flags);
cc_set_imsk_other(cpuid, cc_get_imsk_other(cpuid) | (1 << real_irq));
spin_unlock_irqrestore(&sun4d_imsk_lock, flags);
#else
cc_set_imsk(cc_get_imsk() | (1 << real_irq));
#endif
}
sparc32: genirq support The conversion of sparc32 to genirq is based on original work done by David S. Miller. Daniel Hellstrom has helped in the conversion and implemented the shutdowm functionality. Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20 Test status: sun4c - not tested sun4m,pci - not tested sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20) sun4d - not tested leon - tested on various combinations of leon boards, including SMP variants generic Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW Allocate 64 IRQs - which is enough even for SS2000 Use a table of irq_bucket to maintain uses IRQs irq_bucket is also used to chain several irq's that must be called when the same intrrupt is asserted Use irq_link to link a interrupt source to the irq All plafforms must now supply their own build_device_irq method handler_irq rewriten to use generic irq support floppy Read FLOPPY_IRQ from platform device Use generic request_irq to register the floppy interrupt Rewrote sparc_floppy_irq to use the generic irq support pcic: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for pcic Use pcic_build_device_irq in pci_time_init allocate virtual irqs in pcic_fill_irq sun4c: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for sun4c Use sun4c_build_device_irq in sun4c_init_timers sun4m: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4m_handler_data that allow easy access to necessary data in the mask/unmask functions Add a helper method to enable profile_timer (used from smp) Added sun4m_build_device_irq Use sun4m_build_device_irq in sun4m_init_timers TODO: There is no replacement for smp_rotate that always scheduled next CPU as interrupt target upon an interrupt sun4d: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4d_handler_data that allow easy access to necessary data in mask/unmask fuctions Rewrote sun4d_handler_irq to use generic irq support TODO: The original implmentation of enable/disable had: if (irq < NR_IRQS) return; The new implmentation does not distingush between SBUS and cpu interrupts. I am no sure what is right here. I assume we need to do something for the cpu interrupts. I have not succeeded booting my sun4d box (with or without this patch) and my understanding of this platfrom is limited. So I would be a bit suprised if this works. leon: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for leon Use leon_build_device_irq in leon_init_timers Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Marcel van Nies <morcles@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18 19:25:44 +08:00
static void sun4d_unmask_irq(struct irq_data *data)
{
sparc32: genirq support The conversion of sparc32 to genirq is based on original work done by David S. Miller. Daniel Hellstrom has helped in the conversion and implemented the shutdowm functionality. Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20 Test status: sun4c - not tested sun4m,pci - not tested sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20) sun4d - not tested leon - tested on various combinations of leon boards, including SMP variants generic Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW Allocate 64 IRQs - which is enough even for SS2000 Use a table of irq_bucket to maintain uses IRQs irq_bucket is also used to chain several irq's that must be called when the same intrrupt is asserted Use irq_link to link a interrupt source to the irq All plafforms must now supply their own build_device_irq method handler_irq rewriten to use generic irq support floppy Read FLOPPY_IRQ from platform device Use generic request_irq to register the floppy interrupt Rewrote sparc_floppy_irq to use the generic irq support pcic: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for pcic Use pcic_build_device_irq in pci_time_init allocate virtual irqs in pcic_fill_irq sun4c: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for sun4c Use sun4c_build_device_irq in sun4c_init_timers sun4m: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4m_handler_data that allow easy access to necessary data in the mask/unmask functions Add a helper method to enable profile_timer (used from smp) Added sun4m_build_device_irq Use sun4m_build_device_irq in sun4m_init_timers TODO: There is no replacement for smp_rotate that always scheduled next CPU as interrupt target upon an interrupt sun4d: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4d_handler_data that allow easy access to necessary data in mask/unmask fuctions Rewrote sun4d_handler_irq to use generic irq support TODO: The original implmentation of enable/disable had: if (irq < NR_IRQS) return; The new implmentation does not distingush between SBUS and cpu interrupts. I am no sure what is right here. I assume we need to do something for the cpu interrupts. I have not succeeded booting my sun4d box (with or without this patch) and my understanding of this platfrom is limited. So I would be a bit suprised if this works. leon: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for leon Use leon_build_device_irq in leon_init_timers Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Marcel van Nies <morcles@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18 19:25:44 +08:00
struct sun4d_handler_data *handler_data = data->handler_data;
unsigned int real_irq;
#ifdef CONFIG_SMP
int cpuid = handler_data->cpuid;
unsigned long flags;
sparc32: genirq support The conversion of sparc32 to genirq is based on original work done by David S. Miller. Daniel Hellstrom has helped in the conversion and implemented the shutdowm functionality. Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20 Test status: sun4c - not tested sun4m,pci - not tested sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20) sun4d - not tested leon - tested on various combinations of leon boards, including SMP variants generic Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW Allocate 64 IRQs - which is enough even for SS2000 Use a table of irq_bucket to maintain uses IRQs irq_bucket is also used to chain several irq's that must be called when the same intrrupt is asserted Use irq_link to link a interrupt source to the irq All plafforms must now supply their own build_device_irq method handler_irq rewriten to use generic irq support floppy Read FLOPPY_IRQ from platform device Use generic request_irq to register the floppy interrupt Rewrote sparc_floppy_irq to use the generic irq support pcic: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for pcic Use pcic_build_device_irq in pci_time_init allocate virtual irqs in pcic_fill_irq sun4c: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for sun4c Use sun4c_build_device_irq in sun4c_init_timers sun4m: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4m_handler_data that allow easy access to necessary data in the mask/unmask functions Add a helper method to enable profile_timer (used from smp) Added sun4m_build_device_irq Use sun4m_build_device_irq in sun4m_init_timers TODO: There is no replacement for smp_rotate that always scheduled next CPU as interrupt target upon an interrupt sun4d: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4d_handler_data that allow easy access to necessary data in mask/unmask fuctions Rewrote sun4d_handler_irq to use generic irq support TODO: The original implmentation of enable/disable had: if (irq < NR_IRQS) return; The new implmentation does not distingush between SBUS and cpu interrupts. I am no sure what is right here. I assume we need to do something for the cpu interrupts. I have not succeeded booting my sun4d box (with or without this patch) and my understanding of this platfrom is limited. So I would be a bit suprised if this works. leon: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for leon Use leon_build_device_irq in leon_init_timers Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Marcel van Nies <morcles@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18 19:25:44 +08:00
#endif
real_irq = handler_data->real_irq;
sparc32: genirq support The conversion of sparc32 to genirq is based on original work done by David S. Miller. Daniel Hellstrom has helped in the conversion and implemented the shutdowm functionality. Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20 Test status: sun4c - not tested sun4m,pci - not tested sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20) sun4d - not tested leon - tested on various combinations of leon boards, including SMP variants generic Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW Allocate 64 IRQs - which is enough even for SS2000 Use a table of irq_bucket to maintain uses IRQs irq_bucket is also used to chain several irq's that must be called when the same intrrupt is asserted Use irq_link to link a interrupt source to the irq All plafforms must now supply their own build_device_irq method handler_irq rewriten to use generic irq support floppy Read FLOPPY_IRQ from platform device Use generic request_irq to register the floppy interrupt Rewrote sparc_floppy_irq to use the generic irq support pcic: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for pcic Use pcic_build_device_irq in pci_time_init allocate virtual irqs in pcic_fill_irq sun4c: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for sun4c Use sun4c_build_device_irq in sun4c_init_timers sun4m: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4m_handler_data that allow easy access to necessary data in the mask/unmask functions Add a helper method to enable profile_timer (used from smp) Added sun4m_build_device_irq Use sun4m_build_device_irq in sun4m_init_timers TODO: There is no replacement for smp_rotate that always scheduled next CPU as interrupt target upon an interrupt sun4d: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4d_handler_data that allow easy access to necessary data in mask/unmask fuctions Rewrote sun4d_handler_irq to use generic irq support TODO: The original implmentation of enable/disable had: if (irq < NR_IRQS) return; The new implmentation does not distingush between SBUS and cpu interrupts. I am no sure what is right here. I assume we need to do something for the cpu interrupts. I have not succeeded booting my sun4d box (with or without this patch) and my understanding of this platfrom is limited. So I would be a bit suprised if this works. leon: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for leon Use leon_build_device_irq in leon_init_timers Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Marcel van Nies <morcles@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18 19:25:44 +08:00
#ifdef CONFIG_SMP
spin_lock_irqsave(&sun4d_imsk_lock, flags);
cc_set_imsk_other(cpuid, cc_get_imsk_other(cpuid) & ~(1 << real_irq));
spin_unlock_irqrestore(&sun4d_imsk_lock, flags);
sparc32: genirq support The conversion of sparc32 to genirq is based on original work done by David S. Miller. Daniel Hellstrom has helped in the conversion and implemented the shutdowm functionality. Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20 Test status: sun4c - not tested sun4m,pci - not tested sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20) sun4d - not tested leon - tested on various combinations of leon boards, including SMP variants generic Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW Allocate 64 IRQs - which is enough even for SS2000 Use a table of irq_bucket to maintain uses IRQs irq_bucket is also used to chain several irq's that must be called when the same intrrupt is asserted Use irq_link to link a interrupt source to the irq All plafforms must now supply their own build_device_irq method handler_irq rewriten to use generic irq support floppy Read FLOPPY_IRQ from platform device Use generic request_irq to register the floppy interrupt Rewrote sparc_floppy_irq to use the generic irq support pcic: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for pcic Use pcic_build_device_irq in pci_time_init allocate virtual irqs in pcic_fill_irq sun4c: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for sun4c Use sun4c_build_device_irq in sun4c_init_timers sun4m: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4m_handler_data that allow easy access to necessary data in the mask/unmask functions Add a helper method to enable profile_timer (used from smp) Added sun4m_build_device_irq Use sun4m_build_device_irq in sun4m_init_timers TODO: There is no replacement for smp_rotate that always scheduled next CPU as interrupt target upon an interrupt sun4d: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4d_handler_data that allow easy access to necessary data in mask/unmask fuctions Rewrote sun4d_handler_irq to use generic irq support TODO: The original implmentation of enable/disable had: if (irq < NR_IRQS) return; The new implmentation does not distingush between SBUS and cpu interrupts. I am no sure what is right here. I assume we need to do something for the cpu interrupts. I have not succeeded booting my sun4d box (with or without this patch) and my understanding of this platfrom is limited. So I would be a bit suprised if this works. leon: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for leon Use leon_build_device_irq in leon_init_timers Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Marcel van Nies <morcles@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18 19:25:44 +08:00
#else
cc_set_imsk(cc_get_imsk() & ~(1 << real_irq));
sparc32: genirq support The conversion of sparc32 to genirq is based on original work done by David S. Miller. Daniel Hellstrom has helped in the conversion and implemented the shutdowm functionality. Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20 Test status: sun4c - not tested sun4m,pci - not tested sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20) sun4d - not tested leon - tested on various combinations of leon boards, including SMP variants generic Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW Allocate 64 IRQs - which is enough even for SS2000 Use a table of irq_bucket to maintain uses IRQs irq_bucket is also used to chain several irq's that must be called when the same intrrupt is asserted Use irq_link to link a interrupt source to the irq All plafforms must now supply their own build_device_irq method handler_irq rewriten to use generic irq support floppy Read FLOPPY_IRQ from platform device Use generic request_irq to register the floppy interrupt Rewrote sparc_floppy_irq to use the generic irq support pcic: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for pcic Use pcic_build_device_irq in pci_time_init allocate virtual irqs in pcic_fill_irq sun4c: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for sun4c Use sun4c_build_device_irq in sun4c_init_timers sun4m: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4m_handler_data that allow easy access to necessary data in the mask/unmask functions Add a helper method to enable profile_timer (used from smp) Added sun4m_build_device_irq Use sun4m_build_device_irq in sun4m_init_timers TODO: There is no replacement for smp_rotate that always scheduled next CPU as interrupt target upon an interrupt sun4d: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4d_handler_data that allow easy access to necessary data in mask/unmask fuctions Rewrote sun4d_handler_irq to use generic irq support TODO: The original implmentation of enable/disable had: if (irq < NR_IRQS) return; The new implmentation does not distingush between SBUS and cpu interrupts. I am no sure what is right here. I assume we need to do something for the cpu interrupts. I have not succeeded booting my sun4d box (with or without this patch) and my understanding of this platfrom is limited. So I would be a bit suprised if this works. leon: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for leon Use leon_build_device_irq in leon_init_timers Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Marcel van Nies <morcles@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18 19:25:44 +08:00
#endif
}
sparc32: genirq support The conversion of sparc32 to genirq is based on original work done by David S. Miller. Daniel Hellstrom has helped in the conversion and implemented the shutdowm functionality. Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20 Test status: sun4c - not tested sun4m,pci - not tested sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20) sun4d - not tested leon - tested on various combinations of leon boards, including SMP variants generic Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW Allocate 64 IRQs - which is enough even for SS2000 Use a table of irq_bucket to maintain uses IRQs irq_bucket is also used to chain several irq's that must be called when the same intrrupt is asserted Use irq_link to link a interrupt source to the irq All plafforms must now supply their own build_device_irq method handler_irq rewriten to use generic irq support floppy Read FLOPPY_IRQ from platform device Use generic request_irq to register the floppy interrupt Rewrote sparc_floppy_irq to use the generic irq support pcic: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for pcic Use pcic_build_device_irq in pci_time_init allocate virtual irqs in pcic_fill_irq sun4c: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for sun4c Use sun4c_build_device_irq in sun4c_init_timers sun4m: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4m_handler_data that allow easy access to necessary data in the mask/unmask functions Add a helper method to enable profile_timer (used from smp) Added sun4m_build_device_irq Use sun4m_build_device_irq in sun4m_init_timers TODO: There is no replacement for smp_rotate that always scheduled next CPU as interrupt target upon an interrupt sun4d: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4d_handler_data that allow easy access to necessary data in mask/unmask fuctions Rewrote sun4d_handler_irq to use generic irq support TODO: The original implmentation of enable/disable had: if (irq < NR_IRQS) return; The new implmentation does not distingush between SBUS and cpu interrupts. I am no sure what is right here. I assume we need to do something for the cpu interrupts. I have not succeeded booting my sun4d box (with or without this patch) and my understanding of this platfrom is limited. So I would be a bit suprised if this works. leon: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for leon Use leon_build_device_irq in leon_init_timers Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Marcel van Nies <morcles@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18 19:25:44 +08:00
static unsigned int sun4d_startup_irq(struct irq_data *data)
{
sparc32: genirq support The conversion of sparc32 to genirq is based on original work done by David S. Miller. Daniel Hellstrom has helped in the conversion and implemented the shutdowm functionality. Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20 Test status: sun4c - not tested sun4m,pci - not tested sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20) sun4d - not tested leon - tested on various combinations of leon boards, including SMP variants generic Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW Allocate 64 IRQs - which is enough even for SS2000 Use a table of irq_bucket to maintain uses IRQs irq_bucket is also used to chain several irq's that must be called when the same intrrupt is asserted Use irq_link to link a interrupt source to the irq All plafforms must now supply their own build_device_irq method handler_irq rewriten to use generic irq support floppy Read FLOPPY_IRQ from platform device Use generic request_irq to register the floppy interrupt Rewrote sparc_floppy_irq to use the generic irq support pcic: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for pcic Use pcic_build_device_irq in pci_time_init allocate virtual irqs in pcic_fill_irq sun4c: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for sun4c Use sun4c_build_device_irq in sun4c_init_timers sun4m: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4m_handler_data that allow easy access to necessary data in the mask/unmask functions Add a helper method to enable profile_timer (used from smp) Added sun4m_build_device_irq Use sun4m_build_device_irq in sun4m_init_timers TODO: There is no replacement for smp_rotate that always scheduled next CPU as interrupt target upon an interrupt sun4d: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4d_handler_data that allow easy access to necessary data in mask/unmask fuctions Rewrote sun4d_handler_irq to use generic irq support TODO: The original implmentation of enable/disable had: if (irq < NR_IRQS) return; The new implmentation does not distingush between SBUS and cpu interrupts. I am no sure what is right here. I assume we need to do something for the cpu interrupts. I have not succeeded booting my sun4d box (with or without this patch) and my understanding of this platfrom is limited. So I would be a bit suprised if this works. leon: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for leon Use leon_build_device_irq in leon_init_timers Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Marcel van Nies <morcles@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18 19:25:44 +08:00
irq_link(data->irq);
sun4d_unmask_irq(data);
return 0;
}
sparc32: genirq support The conversion of sparc32 to genirq is based on original work done by David S. Miller. Daniel Hellstrom has helped in the conversion and implemented the shutdowm functionality. Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20 Test status: sun4c - not tested sun4m,pci - not tested sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20) sun4d - not tested leon - tested on various combinations of leon boards, including SMP variants generic Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW Allocate 64 IRQs - which is enough even for SS2000 Use a table of irq_bucket to maintain uses IRQs irq_bucket is also used to chain several irq's that must be called when the same intrrupt is asserted Use irq_link to link a interrupt source to the irq All plafforms must now supply their own build_device_irq method handler_irq rewriten to use generic irq support floppy Read FLOPPY_IRQ from platform device Use generic request_irq to register the floppy interrupt Rewrote sparc_floppy_irq to use the generic irq support pcic: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for pcic Use pcic_build_device_irq in pci_time_init allocate virtual irqs in pcic_fill_irq sun4c: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for sun4c Use sun4c_build_device_irq in sun4c_init_timers sun4m: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4m_handler_data that allow easy access to necessary data in the mask/unmask functions Add a helper method to enable profile_timer (used from smp) Added sun4m_build_device_irq Use sun4m_build_device_irq in sun4m_init_timers TODO: There is no replacement for smp_rotate that always scheduled next CPU as interrupt target upon an interrupt sun4d: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4d_handler_data that allow easy access to necessary data in mask/unmask fuctions Rewrote sun4d_handler_irq to use generic irq support TODO: The original implmentation of enable/disable had: if (irq < NR_IRQS) return; The new implmentation does not distingush between SBUS and cpu interrupts. I am no sure what is right here. I assume we need to do something for the cpu interrupts. I have not succeeded booting my sun4d box (with or without this patch) and my understanding of this platfrom is limited. So I would be a bit suprised if this works. leon: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for leon Use leon_build_device_irq in leon_init_timers Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Marcel van Nies <morcles@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18 19:25:44 +08:00
static void sun4d_shutdown_irq(struct irq_data *data)
{
sun4d_mask_irq(data);
irq_unlink(data->irq);
}
sparc32: genirq support The conversion of sparc32 to genirq is based on original work done by David S. Miller. Daniel Hellstrom has helped in the conversion and implemented the shutdowm functionality. Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20 Test status: sun4c - not tested sun4m,pci - not tested sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20) sun4d - not tested leon - tested on various combinations of leon boards, including SMP variants generic Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW Allocate 64 IRQs - which is enough even for SS2000 Use a table of irq_bucket to maintain uses IRQs irq_bucket is also used to chain several irq's that must be called when the same intrrupt is asserted Use irq_link to link a interrupt source to the irq All plafforms must now supply their own build_device_irq method handler_irq rewriten to use generic irq support floppy Read FLOPPY_IRQ from platform device Use generic request_irq to register the floppy interrupt Rewrote sparc_floppy_irq to use the generic irq support pcic: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for pcic Use pcic_build_device_irq in pci_time_init allocate virtual irqs in pcic_fill_irq sun4c: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for sun4c Use sun4c_build_device_irq in sun4c_init_timers sun4m: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4m_handler_data that allow easy access to necessary data in the mask/unmask functions Add a helper method to enable profile_timer (used from smp) Added sun4m_build_device_irq Use sun4m_build_device_irq in sun4m_init_timers TODO: There is no replacement for smp_rotate that always scheduled next CPU as interrupt target upon an interrupt sun4d: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4d_handler_data that allow easy access to necessary data in mask/unmask fuctions Rewrote sun4d_handler_irq to use generic irq support TODO: The original implmentation of enable/disable had: if (irq < NR_IRQS) return; The new implmentation does not distingush between SBUS and cpu interrupts. I am no sure what is right here. I assume we need to do something for the cpu interrupts. I have not succeeded booting my sun4d box (with or without this patch) and my understanding of this platfrom is limited. So I would be a bit suprised if this works. leon: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for leon Use leon_build_device_irq in leon_init_timers Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Marcel van Nies <morcles@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18 19:25:44 +08:00
struct irq_chip sun4d_irq = {
.name = "sun4d",
.irq_startup = sun4d_startup_irq,
.irq_shutdown = sun4d_shutdown_irq,
.irq_unmask = sun4d_unmask_irq,
.irq_mask = sun4d_mask_irq,
};
#ifdef CONFIG_SMP
static void sun4d_set_cpu_int(int cpu, int level)
{
sun4d_send_ipi(cpu, level);
}
static void sun4d_clear_ipi(int cpu, int level)
{
}
static void sun4d_set_udt(int cpu)
{
}
/* Setup IRQ distribution scheme. */
void __init sun4d_distribute_irqs(void)
{
struct device_node *dp;
int cpuid = cpu_logical_map(1);
if (cpuid == -1)
cpuid = cpu_logical_map(0);
for_each_node_by_name(dp, "sbi") {
int devid = of_getintprop_default(dp, "device-id", 0);
int board = of_getintprop_default(dp, "board#", 0);
board_to_cpu[board] = cpuid;
set_sbi_tid(devid, cpuid << 3);
}
printk(KERN_ERR "All sbus IRQs directed to CPU%d\n", cpuid);
}
#endif
static void sun4d_clear_clock_irq(void)
{
sbus_readl(&sun4d_timers->l10_timer_limit);
}
static void sun4d_load_profile_irq(int cpu, unsigned int limit)
{
bw_set_prof_limit(cpu, limit);
}
static void __init sun4d_load_profile_irqs(void)
{
int cpu = 0, mid;
while (!cpu_find_by_instance(cpu, NULL, &mid)) {
sun4d_load_profile_irq(mid >> 3, 0);
cpu++;
}
}
unsigned int _sun4d_build_device_irq(unsigned int real_irq,
unsigned int pil,
unsigned int board)
{
struct sun4d_handler_data *handler_data;
unsigned int irq;
irq = irq_alloc(real_irq, pil);
if (irq == 0) {
prom_printf("IRQ: allocate for %d %d %d failed\n",
real_irq, pil, board);
goto err_out;
}
handler_data = irq_get_handler_data(irq);
if (unlikely(handler_data))
goto err_out;
handler_data = kzalloc(sizeof(struct sun4d_handler_data), GFP_ATOMIC);
if (unlikely(!handler_data)) {
prom_printf("IRQ: kzalloc(sun4d_handler_data) failed.\n");
prom_halt();
}
handler_data->cpuid = board_to_cpu[board];
handler_data->real_irq = real_irq;
irq_set_chip_and_handler_name(irq, &sun4d_irq,
handle_level_irq, "level");
irq_set_handler_data(irq, handler_data);
err_out:
return irq;
}
unsigned int sun4d_build_device_irq(struct platform_device *op,
unsigned int real_irq)
{
struct device_node *dp = op->dev.of_node;
struct device_node *board_parent, *bus = dp->parent;
char *bus_connection;
const struct linux_prom_registers *regs;
sparc32: genirq support The conversion of sparc32 to genirq is based on original work done by David S. Miller. Daniel Hellstrom has helped in the conversion and implemented the shutdowm functionality. Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20 Test status: sun4c - not tested sun4m,pci - not tested sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20) sun4d - not tested leon - tested on various combinations of leon boards, including SMP variants generic Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW Allocate 64 IRQs - which is enough even for SS2000 Use a table of irq_bucket to maintain uses IRQs irq_bucket is also used to chain several irq's that must be called when the same intrrupt is asserted Use irq_link to link a interrupt source to the irq All plafforms must now supply their own build_device_irq method handler_irq rewriten to use generic irq support floppy Read FLOPPY_IRQ from platform device Use generic request_irq to register the floppy interrupt Rewrote sparc_floppy_irq to use the generic irq support pcic: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for pcic Use pcic_build_device_irq in pci_time_init allocate virtual irqs in pcic_fill_irq sun4c: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for sun4c Use sun4c_build_device_irq in sun4c_init_timers sun4m: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4m_handler_data that allow easy access to necessary data in the mask/unmask functions Add a helper method to enable profile_timer (used from smp) Added sun4m_build_device_irq Use sun4m_build_device_irq in sun4m_init_timers TODO: There is no replacement for smp_rotate that always scheduled next CPU as interrupt target upon an interrupt sun4d: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4d_handler_data that allow easy access to necessary data in mask/unmask fuctions Rewrote sun4d_handler_irq to use generic irq support TODO: The original implmentation of enable/disable had: if (irq < NR_IRQS) return; The new implmentation does not distingush between SBUS and cpu interrupts. I am no sure what is right here. I assume we need to do something for the cpu interrupts. I have not succeeded booting my sun4d box (with or without this patch) and my understanding of this platfrom is limited. So I would be a bit suprised if this works. leon: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for leon Use leon_build_device_irq in leon_init_timers Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Marcel van Nies <morcles@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18 19:25:44 +08:00
unsigned int pil;
unsigned int irq;
int board, slot;
int sbusl;
irq = real_irq;
while (bus) {
if (!strcmp(bus->name, "sbi")) {
bus_connection = "io-unit";
break;
}
if (!strcmp(bus->name, "bootbus")) {
bus_connection = "cpu-unit";
break;
}
bus = bus->parent;
}
if (!bus)
goto err_out;
regs = of_get_property(dp, "reg", NULL);
if (!regs)
goto err_out;
slot = regs->which_io;
/*
* If Bus nodes parent is not io-unit/cpu-unit or the io-unit/cpu-unit
* lacks a "board#" property, something is very wrong.
*/
if (!bus->parent || strcmp(bus->parent->name, bus_connection)) {
printk(KERN_ERR "%s: Error, parent is not %s.\n",
bus->full_name, bus_connection);
goto err_out;
}
board_parent = bus->parent;
board = of_getintprop_default(board_parent, "board#", -1);
if (board == -1) {
printk(KERN_ERR "%s: Error, lacks board# property.\n",
board_parent->full_name);
goto err_out;
}
sbusl = pil_to_sbus[real_irq];
if (sbusl)
sparc32: genirq support The conversion of sparc32 to genirq is based on original work done by David S. Miller. Daniel Hellstrom has helped in the conversion and implemented the shutdowm functionality. Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20 Test status: sun4c - not tested sun4m,pci - not tested sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20) sun4d - not tested leon - tested on various combinations of leon boards, including SMP variants generic Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW Allocate 64 IRQs - which is enough even for SS2000 Use a table of irq_bucket to maintain uses IRQs irq_bucket is also used to chain several irq's that must be called when the same intrrupt is asserted Use irq_link to link a interrupt source to the irq All plafforms must now supply their own build_device_irq method handler_irq rewriten to use generic irq support floppy Read FLOPPY_IRQ from platform device Use generic request_irq to register the floppy interrupt Rewrote sparc_floppy_irq to use the generic irq support pcic: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for pcic Use pcic_build_device_irq in pci_time_init allocate virtual irqs in pcic_fill_irq sun4c: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for sun4c Use sun4c_build_device_irq in sun4c_init_timers sun4m: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4m_handler_data that allow easy access to necessary data in the mask/unmask functions Add a helper method to enable profile_timer (used from smp) Added sun4m_build_device_irq Use sun4m_build_device_irq in sun4m_init_timers TODO: There is no replacement for smp_rotate that always scheduled next CPU as interrupt target upon an interrupt sun4d: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4d_handler_data that allow easy access to necessary data in mask/unmask fuctions Rewrote sun4d_handler_irq to use generic irq support TODO: The original implmentation of enable/disable had: if (irq < NR_IRQS) return; The new implmentation does not distingush between SBUS and cpu interrupts. I am no sure what is right here. I assume we need to do something for the cpu interrupts. I have not succeeded booting my sun4d box (with or without this patch) and my understanding of this platfrom is limited. So I would be a bit suprised if this works. leon: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for leon Use leon_build_device_irq in leon_init_timers Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Marcel van Nies <morcles@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18 19:25:44 +08:00
pil = sun4d_encode_irq(board, sbusl, slot);
else
pil = real_irq;
irq = _sun4d_build_device_irq(real_irq, pil, board);
err_out:
return irq;
}
unsigned int sun4d_build_timer_irq(unsigned int board, unsigned int real_irq)
{
return _sun4d_build_device_irq(real_irq, real_irq, board);
}
static void __init sun4d_fixup_trap_table(void)
{
#ifdef CONFIG_SMP
unsigned long flags;
struct tt_entry *trap_table = &sparc_ttable[SP_TRAP_IRQ1 + (14 - 1)];
/* Adjust so that we jump directly to smp4d_ticker */
lvl14_save[2] += smp4d_ticker - real_irq_entry;
/* For SMP we use the level 14 ticker, however the bootup code
* has copied the firmware's level 14 vector into the boot cpu's
* trap table, we must fix this now or we get squashed.
*/
local_irq_save(flags);
patchme_maybe_smp_msg[0] = 0x01000000; /* NOP out the branch */
trap_table->inst_one = lvl14_save[0];
trap_table->inst_two = lvl14_save[1];
trap_table->inst_three = lvl14_save[2];
trap_table->inst_four = lvl14_save[3];
local_flush_cache_all();
local_irq_restore(flags);
#endif
}
static void __init sun4d_init_timers(irq_handler_t counter_fn)
{
struct device_node *dp;
struct resource res;
sparc32: genirq support The conversion of sparc32 to genirq is based on original work done by David S. Miller. Daniel Hellstrom has helped in the conversion and implemented the shutdowm functionality. Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20 Test status: sun4c - not tested sun4m,pci - not tested sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20) sun4d - not tested leon - tested on various combinations of leon boards, including SMP variants generic Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW Allocate 64 IRQs - which is enough even for SS2000 Use a table of irq_bucket to maintain uses IRQs irq_bucket is also used to chain several irq's that must be called when the same intrrupt is asserted Use irq_link to link a interrupt source to the irq All plafforms must now supply their own build_device_irq method handler_irq rewriten to use generic irq support floppy Read FLOPPY_IRQ from platform device Use generic request_irq to register the floppy interrupt Rewrote sparc_floppy_irq to use the generic irq support pcic: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for pcic Use pcic_build_device_irq in pci_time_init allocate virtual irqs in pcic_fill_irq sun4c: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for sun4c Use sun4c_build_device_irq in sun4c_init_timers sun4m: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4m_handler_data that allow easy access to necessary data in the mask/unmask functions Add a helper method to enable profile_timer (used from smp) Added sun4m_build_device_irq Use sun4m_build_device_irq in sun4m_init_timers TODO: There is no replacement for smp_rotate that always scheduled next CPU as interrupt target upon an interrupt sun4d: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4d_handler_data that allow easy access to necessary data in mask/unmask fuctions Rewrote sun4d_handler_irq to use generic irq support TODO: The original implmentation of enable/disable had: if (irq < NR_IRQS) return; The new implmentation does not distingush between SBUS and cpu interrupts. I am no sure what is right here. I assume we need to do something for the cpu interrupts. I have not succeeded booting my sun4d box (with or without this patch) and my understanding of this platfrom is limited. So I would be a bit suprised if this works. leon: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for leon Use leon_build_device_irq in leon_init_timers Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Marcel van Nies <morcles@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18 19:25:44 +08:00
unsigned int irq;
const u32 *reg;
int err;
int board;
dp = of_find_node_by_name(NULL, "cpu-unit");
if (!dp) {
prom_printf("sun4d_init_timers: Unable to find cpu-unit\n");
prom_halt();
}
/* Which cpu-unit we use is arbitrary, we can view the bootbus timer
* registers via any cpu's mapping. The first 'reg' property is the
* bootbus.
*/
reg = of_get_property(dp, "reg", NULL);
if (!reg) {
prom_printf("sun4d_init_timers: No reg property\n");
prom_halt();
}
board = of_getintprop_default(dp, "board#", -1);
if (board == -1) {
prom_printf("sun4d_init_timers: No board# property on cpu-unit\n");
prom_halt();
}
of_node_put(dp);
res.start = reg[1];
res.end = reg[2] - 1;
res.flags = reg[0] & 0xff;
sun4d_timers = of_ioremap(&res, BW_TIMER_LIMIT,
sizeof(struct sun4d_timer_regs), "user timer");
if (!sun4d_timers) {
prom_printf("sun4d_init_timers: Can't map timer regs\n");
prom_halt();
}
sbus_writel((((1000000/HZ) + 1) << 10), &sun4d_timers->l10_timer_limit);
master_l10_counter = &sun4d_timers->l10_cur_count;
irq = sun4d_build_timer_irq(board, SUN4D_TIMER_IRQ);
sparc32: genirq support The conversion of sparc32 to genirq is based on original work done by David S. Miller. Daniel Hellstrom has helped in the conversion and implemented the shutdowm functionality. Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20 Test status: sun4c - not tested sun4m,pci - not tested sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20) sun4d - not tested leon - tested on various combinations of leon boards, including SMP variants generic Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW Allocate 64 IRQs - which is enough even for SS2000 Use a table of irq_bucket to maintain uses IRQs irq_bucket is also used to chain several irq's that must be called when the same intrrupt is asserted Use irq_link to link a interrupt source to the irq All plafforms must now supply their own build_device_irq method handler_irq rewriten to use generic irq support floppy Read FLOPPY_IRQ from platform device Use generic request_irq to register the floppy interrupt Rewrote sparc_floppy_irq to use the generic irq support pcic: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for pcic Use pcic_build_device_irq in pci_time_init allocate virtual irqs in pcic_fill_irq sun4c: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for sun4c Use sun4c_build_device_irq in sun4c_init_timers sun4m: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4m_handler_data that allow easy access to necessary data in the mask/unmask functions Add a helper method to enable profile_timer (used from smp) Added sun4m_build_device_irq Use sun4m_build_device_irq in sun4m_init_timers TODO: There is no replacement for smp_rotate that always scheduled next CPU as interrupt target upon an interrupt sun4d: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4d_handler_data that allow easy access to necessary data in mask/unmask fuctions Rewrote sun4d_handler_irq to use generic irq support TODO: The original implmentation of enable/disable had: if (irq < NR_IRQS) return; The new implmentation does not distingush between SBUS and cpu interrupts. I am no sure what is right here. I assume we need to do something for the cpu interrupts. I have not succeeded booting my sun4d box (with or without this patch) and my understanding of this platfrom is limited. So I would be a bit suprised if this works. leon: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for leon Use leon_build_device_irq in leon_init_timers Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Marcel van Nies <morcles@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18 19:25:44 +08:00
err = request_irq(irq, counter_fn, IRQF_TIMER, "timer", NULL);
if (err) {
prom_printf("sun4d_init_timers: request_irq() failed with %d\n",
err);
prom_halt();
}
sun4d_load_profile_irqs();
sun4d_fixup_trap_table();
}
void __init sun4d_init_sbi_irq(void)
{
struct device_node *dp;
int target_cpu;
target_cpu = boot_cpu_id;
for_each_node_by_name(dp, "sbi") {
int devid = of_getintprop_default(dp, "device-id", 0);
int board = of_getintprop_default(dp, "board#", 0);
unsigned int mask;
set_sbi_tid(devid, target_cpu << 3);
board_to_cpu[board] = target_cpu;
/* Get rid of pending irqs from PROM */
mask = acquire_sbi(devid, 0xffffffff);
if (mask) {
printk(KERN_ERR "Clearing pending IRQs %08x on SBI %d\n",
mask, board);
release_sbi(devid, mask);
}
}
}
void __init sun4d_init_IRQ(void)
{
local_irq_disable();
BTFIXUPSET_CALL(clear_clock_irq, sun4d_clear_clock_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(load_profile_irq, sun4d_load_profile_irq, BTFIXUPCALL_NORM);
sparc32: genirq support The conversion of sparc32 to genirq is based on original work done by David S. Miller. Daniel Hellstrom has helped in the conversion and implemented the shutdowm functionality. Marcel van Nies <morcles@gmail.com> has tested this on Sparc Station 20 Test status: sun4c - not tested sun4m,pci - not tested sun4m,sbus - tested (Sparc Classic, Sparc Station 5, Sparc Station 20) sun4d - not tested leon - tested on various combinations of leon boards, including SMP variants generic Introduce use of GENERIC_HARDIRQS and GENERIC_IRQ_SHOW Allocate 64 IRQs - which is enough even for SS2000 Use a table of irq_bucket to maintain uses IRQs irq_bucket is also used to chain several irq's that must be called when the same intrrupt is asserted Use irq_link to link a interrupt source to the irq All plafforms must now supply their own build_device_irq method handler_irq rewriten to use generic irq support floppy Read FLOPPY_IRQ from platform device Use generic request_irq to register the floppy interrupt Rewrote sparc_floppy_irq to use the generic irq support pcic: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for pcic Use pcic_build_device_irq in pci_time_init allocate virtual irqs in pcic_fill_irq sun4c: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for sun4c Use sun4c_build_device_irq in sun4c_init_timers sun4m: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4m_handler_data that allow easy access to necessary data in the mask/unmask functions Add a helper method to enable profile_timer (used from smp) Added sun4m_build_device_irq Use sun4m_build_device_irq in sun4m_init_timers TODO: There is no replacement for smp_rotate that always scheduled next CPU as interrupt target upon an interrupt sun4d: Introduce irq_chip Introduce dedicated mask/unmask methods Introduce sun4d_handler_data that allow easy access to necessary data in mask/unmask fuctions Rewrote sun4d_handler_irq to use generic irq support TODO: The original implmentation of enable/disable had: if (irq < NR_IRQS) return; The new implmentation does not distingush between SBUS and cpu interrupts. I am no sure what is right here. I assume we need to do something for the cpu interrupts. I have not succeeded booting my sun4d box (with or without this patch) and my understanding of this platfrom is limited. So I would be a bit suprised if this works. leon: Introduce irq_chip Store mask in chip_data for use in mask/unmask functions Add build_device_irq for leon Use leon_build_device_irq in leon_init_timers Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Daniel Hellstrom <daniel@gaisler.com> Tested-by: Marcel van Nies <morcles@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-18 19:25:44 +08:00
sparc_irq_config.init_timers = sun4d_init_timers;
sparc_irq_config.build_device_irq = sun4d_build_device_irq;
#ifdef CONFIG_SMP
BTFIXUPSET_CALL(set_cpu_int, sun4d_set_cpu_int, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(clear_cpu_int, sun4d_clear_ipi, BTFIXUPCALL_NOP);
BTFIXUPSET_CALL(set_irq_udt, sun4d_set_udt, BTFIXUPCALL_NOP);
#endif
/* Cannot enable interrupts until OBP ticker is disabled. */
}