linux-sg2042/arch/mips/kernel/vmlinux.lds.S

166 lines
3.1 KiB
ArmAsm
Raw Normal View History

#include <asm/asm-offsets.h>
#include <asm/page.h>
#include <asm/thread_info.h>
#include <asm-generic/vmlinux.lds.h>
#undef mips
#define mips mips
OUTPUT_ARCH(mips)
ENTRY(kernel_entry)
PHDRS {
text PT_LOAD FLAGS(7); /* RWX */
note PT_NOTE FLAGS(4); /* R__ */
}
arm, cris, mips, sparc, powerpc, um, xtensa: fix build with bash 4.0 Albin Tonnerre <albin.tonnerre@free-electrons.com> reported: Bash 4 filters out variables which contain a dot in them. This happends to be the case of CPPFLAGS_vmlinux.lds. This is rather unfortunate, as it now causes build failures when using SHELL=/bin/bash to compile, or when bash happens to be used by make (eg when it's /bin/sh) Remove the common definition of CPPFLAGS_vmlinux.lds by pushing relevant stuff to either Makefile.build or the arch specific kernel/Makefile where we build the linker script. This is also nice cleanup as we move the information out where it is used. Notes for the different architectures touched: arm - we use an already exported symbol cris - we use a config symbol aleady available [Not build tested] mips - the jiffies complexity has moved to vmlinux.lds.S where we need it. Added a few variables to CPPFLAGS - they are only used by the linker script. [Not build tested] powerpc - removed assignment that is not needed [not build tested] sparc - simplified it using $(BITS) um - introduced a few new exported variables to deal with this xtensa - added options to CPP invocation [not build tested] Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Chris Zankel <chris@zankel.net> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-09-20 18:28:22 +08:00
#ifdef CONFIG_32BIT
#ifdef CONFIG_CPU_LITTLE_ENDIAN
arm, cris, mips, sparc, powerpc, um, xtensa: fix build with bash 4.0 Albin Tonnerre <albin.tonnerre@free-electrons.com> reported: Bash 4 filters out variables which contain a dot in them. This happends to be the case of CPPFLAGS_vmlinux.lds. This is rather unfortunate, as it now causes build failures when using SHELL=/bin/bash to compile, or when bash happens to be used by make (eg when it's /bin/sh) Remove the common definition of CPPFLAGS_vmlinux.lds by pushing relevant stuff to either Makefile.build or the arch specific kernel/Makefile where we build the linker script. This is also nice cleanup as we move the information out where it is used. Notes for the different architectures touched: arm - we use an already exported symbol cris - we use a config symbol aleady available [Not build tested] mips - the jiffies complexity has moved to vmlinux.lds.S where we need it. Added a few variables to CPPFLAGS - they are only used by the linker script. [Not build tested] powerpc - removed assignment that is not needed [not build tested] sparc - simplified it using $(BITS) um - introduced a few new exported variables to deal with this xtensa - added options to CPP invocation [not build tested] Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Chris Zankel <chris@zankel.net> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-09-20 18:28:22 +08:00
jiffies = jiffies_64;
#else
arm, cris, mips, sparc, powerpc, um, xtensa: fix build with bash 4.0 Albin Tonnerre <albin.tonnerre@free-electrons.com> reported: Bash 4 filters out variables which contain a dot in them. This happends to be the case of CPPFLAGS_vmlinux.lds. This is rather unfortunate, as it now causes build failures when using SHELL=/bin/bash to compile, or when bash happens to be used by make (eg when it's /bin/sh) Remove the common definition of CPPFLAGS_vmlinux.lds by pushing relevant stuff to either Makefile.build or the arch specific kernel/Makefile where we build the linker script. This is also nice cleanup as we move the information out where it is used. Notes for the different architectures touched: arm - we use an already exported symbol cris - we use a config symbol aleady available [Not build tested] mips - the jiffies complexity has moved to vmlinux.lds.S where we need it. Added a few variables to CPPFLAGS - they are only used by the linker script. [Not build tested] powerpc - removed assignment that is not needed [not build tested] sparc - simplified it using $(BITS) um - introduced a few new exported variables to deal with this xtensa - added options to CPP invocation [not build tested] Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Chris Zankel <chris@zankel.net> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-09-20 18:28:22 +08:00
jiffies = jiffies_64 + 4;
#endif
#else
arm, cris, mips, sparc, powerpc, um, xtensa: fix build with bash 4.0 Albin Tonnerre <albin.tonnerre@free-electrons.com> reported: Bash 4 filters out variables which contain a dot in them. This happends to be the case of CPPFLAGS_vmlinux.lds. This is rather unfortunate, as it now causes build failures when using SHELL=/bin/bash to compile, or when bash happens to be used by make (eg when it's /bin/sh) Remove the common definition of CPPFLAGS_vmlinux.lds by pushing relevant stuff to either Makefile.build or the arch specific kernel/Makefile where we build the linker script. This is also nice cleanup as we move the information out where it is used. Notes for the different architectures touched: arm - we use an already exported symbol cris - we use a config symbol aleady available [Not build tested] mips - the jiffies complexity has moved to vmlinux.lds.S where we need it. Added a few variables to CPPFLAGS - they are only used by the linker script. [Not build tested] powerpc - removed assignment that is not needed [not build tested] sparc - simplified it using $(BITS) um - introduced a few new exported variables to deal with this xtensa - added options to CPP invocation [not build tested] Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Chris Zankel <chris@zankel.net> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-09-20 18:28:22 +08:00
jiffies = jiffies_64;
#endif
SECTIONS
{
#ifdef CONFIG_BOOT_ELF64
/* Read-only sections, merged into text segment: */
/* . = 0xc000000000000000; */
/* This is the value for an Origin kernel, taken from an IRIX kernel. */
/* . = 0xc00000000001c000; */
/* Set the vaddr for the text segment to a value
* >= 0xa800 0000 0001 9000 if no symmon is going to configured
* >= 0xa800 0000 0030 0000 otherwise
*/
/* . = 0xa800000000300000; */
. = 0xffffffff80300000;
#endif
arm, cris, mips, sparc, powerpc, um, xtensa: fix build with bash 4.0 Albin Tonnerre <albin.tonnerre@free-electrons.com> reported: Bash 4 filters out variables which contain a dot in them. This happends to be the case of CPPFLAGS_vmlinux.lds. This is rather unfortunate, as it now causes build failures when using SHELL=/bin/bash to compile, or when bash happens to be used by make (eg when it's /bin/sh) Remove the common definition of CPPFLAGS_vmlinux.lds by pushing relevant stuff to either Makefile.build or the arch specific kernel/Makefile where we build the linker script. This is also nice cleanup as we move the information out where it is used. Notes for the different architectures touched: arm - we use an already exported symbol cris - we use a config symbol aleady available [Not build tested] mips - the jiffies complexity has moved to vmlinux.lds.S where we need it. Added a few variables to CPPFLAGS - they are only used by the linker script. [Not build tested] powerpc - removed assignment that is not needed [not build tested] sparc - simplified it using $(BITS) um - introduced a few new exported variables to deal with this xtensa - added options to CPP invocation [not build tested] Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Chris Zankel <chris@zankel.net> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2009-09-20 18:28:22 +08:00
. = VMLINUX_LOAD_ADDRESS;
/* read-only */
_text = .; /* Text and read-only data */
.text : {
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
KPROBES_TEXT
IRQENTRY_TEXT
*(.text.*)
*(.fixup)
*(.gnu.warning)
} :text = 0
_etext = .; /* End of text section */
EXCEPTION_TABLE(16)
/* Exception table for data bus errors */
__dbe_table : {
__start___dbe_table = .;
*(__dbe_table)
__stop___dbe_table = .;
}
NOTES :text :note
.dummy : { *(.dummy) } :text
extable, core_kernel_data(): Make sure all archs define _sdata A new utility function (core_kernel_data()) is used to determine if a passed in address is part of core kernel data or not. It may or may not return true for RO data, but this utility must work for RW data. Thus both _sdata and _edata must be defined and continuous, without .init sections that may later be freed and replaced by volatile memory (memory that can be freed). This utility function is used to determine if data is safe from ever being freed. Thus it should return true for all RW global data that is not in a module or has been allocated, or false otherwise. Also change core_kernel_data() back to the more precise _sdata condition and document the function. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: Hirokazu Takata <takata@linux-m32r.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: linux-m68k@lists.linux-m68k.org Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Helge Deller <deller@gmx.de> Cc: JamesE.J.Bottomley <jejb@parisc-linux.org> Link: http://lkml.kernel.org/r/1305855298.1465.19.camel@gandalf.stny.rr.com Signed-off-by: Ingo Molnar <mingo@elte.hu> ---- arch/alpha/kernel/vmlinux.lds.S | 1 + arch/m32r/kernel/vmlinux.lds.S | 1 + arch/m68k/kernel/vmlinux-std.lds | 2 ++ arch/m68k/kernel/vmlinux-sun3.lds | 1 + arch/mips/kernel/vmlinux.lds.S | 1 + arch/parisc/kernel/vmlinux.lds.S | 3 +++ kernel/extable.c | 12 +++++++++++- 7 files changed, 20 insertions(+), 1 deletion(-)
2011-05-20 09:34:58 +08:00
_sdata = .; /* Start of data section */
RODATA
/* writeable */
.data : { /* Data */
. = . + DATAOFFSET; /* for CONFIG_MAPPED_KERNEL */
INIT_TASK_DATA(THREAD_SIZE)
NOSAVE_DATA
CACHELINE_ALIGNED_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT)
READ_MOSTLY_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT)
DATA_DATA
CONSTRUCTORS
}
_gp = . + 0x8000;
.lit8 : {
*(.lit8)
}
.lit4 : {
*(.lit4)
}
/* We want the small data sections together, so single-instruction offsets
can access them all, and initialized data all before uninitialized, so
we can shorten the on-disk segment size. */
.sdata : {
*(.sdata)
}
_edata = .; /* End of data section */
/* will be freed after init */
. = ALIGN(PAGE_SIZE); /* Init code and data */
__init_begin = .;
INIT_TEXT_SECTION(PAGE_SIZE)
INIT_DATA_SECTION(16)
. = ALIGN(4);
.mips.machines.init : AT(ADDR(.mips.machines.init) - LOAD_OFFSET) {
__mips_machines_start = .;
*(.mips.machines.init)
__mips_machines_end = .;
}
/* .exit.text is discarded at runtime, not link time, to deal with
* references from .rodata
*/
.exit.text : {
EXIT_TEXT
}
.exit.data : {
EXIT_DATA
}
PERCPU_SECTION(1 << CONFIG_MIPS_L1_CACHE_SHIFT)
. = ALIGN(PAGE_SIZE);
__init_end = .;
/* freed after init ends here */
BSS_SECTION(0, 0, 0)
_end = . ;
/* These mark the ABI of the kernel for debuggers. */
.mdebug.abi32 : {
KEEP(*(.mdebug.abi32))
}
.mdebug.abi64 : {
KEEP(*(.mdebug.abi64))
}
/* This is the MIPS specific mdebug section. */
.mdebug : {
*(.mdebug)
}
STABS_DEBUG
DWARF_DEBUG
/* These must appear regardless of . */
.gptab.sdata : {
*(.gptab.data)
*(.gptab.sdata)
}
.gptab.sbss : {
*(.gptab.bss)
*(.gptab.sbss)
}
/* Sections to be discarded */
DISCARDS
/DISCARD/ : {
/* ABI crap starts here */
*(.MIPS.options)
*(.options)
*(.pdr)
*(.reginfo)
}
}