linux-sg2042/drivers/gpio/gpio-mpc8xxx.c

389 lines
9.9 KiB
C
Raw Normal View History

/*
* GPIOs on MPC512x/8349/8572/8610 and compatible
*
* Copyright (C) 2008 Peter Korsgaard <jacmet@sunsite.dk>
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/gpio.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/irq.h>
#define MPC8XXX_GPIO_PINS 32
#define GPIO_DIR 0x00
#define GPIO_ODR 0x04
#define GPIO_DAT 0x08
#define GPIO_IER 0x0c
#define GPIO_IMR 0x10
#define GPIO_ICR 0x14
#define GPIO_ICR2 0x18
struct mpc8xxx_gpio_chip {
struct of_mm_gpio_chip mm_gc;
spinlock_t lock;
/*
* shadowed data register to be able to clear/set output pins in
* open drain mode safely
*/
u32 data;
struct irq_domain *irq;
const void *of_dev_id_data;
};
static inline u32 mpc8xxx_gpio2mask(unsigned int gpio)
{
return 1u << (MPC8XXX_GPIO_PINS - 1 - gpio);
}
static inline struct mpc8xxx_gpio_chip *
to_mpc8xxx_gpio_chip(struct of_mm_gpio_chip *mm)
{
return container_of(mm, struct mpc8xxx_gpio_chip, mm_gc);
}
static void mpc8xxx_gpio_save_regs(struct of_mm_gpio_chip *mm)
{
struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
mpc8xxx_gc->data = in_be32(mm->regs + GPIO_DAT);
}
/* Workaround GPIO 1 errata on MPC8572/MPC8536. The status of GPIOs
* defined as output cannot be determined by reading GPDAT register,
* so we use shadow data register instead. The status of input pins
* is determined by reading GPDAT register.
*/
static int mpc8572_gpio_get(struct gpio_chip *gc, unsigned int gpio)
{
u32 val;
struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
val = in_be32(mm->regs + GPIO_DAT) & ~in_be32(mm->regs + GPIO_DIR);
return (val | mpc8xxx_gc->data) & mpc8xxx_gpio2mask(gpio);
}
static int mpc8xxx_gpio_get(struct gpio_chip *gc, unsigned int gpio)
{
struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
return in_be32(mm->regs + GPIO_DAT) & mpc8xxx_gpio2mask(gpio);
}
static void mpc8xxx_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
{
struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
unsigned long flags;
spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
if (val)
mpc8xxx_gc->data |= mpc8xxx_gpio2mask(gpio);
else
mpc8xxx_gc->data &= ~mpc8xxx_gpio2mask(gpio);
out_be32(mm->regs + GPIO_DAT, mpc8xxx_gc->data);
spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
}
static int mpc8xxx_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
{
struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
unsigned long flags;
spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
clrbits32(mm->regs + GPIO_DIR, mpc8xxx_gpio2mask(gpio));
spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
return 0;
}
static int mpc8xxx_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
{
struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
unsigned long flags;
mpc8xxx_gpio_set(gc, gpio, val);
spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
setbits32(mm->regs + GPIO_DIR, mpc8xxx_gpio2mask(gpio));
spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
return 0;
}
static int mpc5121_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
{
/* GPIO 28..31 are input only on MPC5121 */
if (gpio >= 28)
return -EINVAL;
return mpc8xxx_gpio_dir_out(gc, gpio, val);
}
static int mpc8xxx_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
{
struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
if (mpc8xxx_gc->irq && offset < MPC8XXX_GPIO_PINS)
return irq_create_mapping(mpc8xxx_gc->irq, offset);
else
return -ENXIO;
}
static void mpc8xxx_gpio_irq_cascade(unsigned int irq, struct irq_desc *desc)
{
struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_desc_get_handler_data(desc);
struct irq_chip *chip = irq_desc_get_chip(desc);
struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc;
unsigned int mask;
mask = in_be32(mm->regs + GPIO_IER) & in_be32(mm->regs + GPIO_IMR);
if (mask)
generic_handle_irq(irq_linear_revmap(mpc8xxx_gc->irq,
32 - ffs(mask)));
if (chip->irq_eoi)
chip->irq_eoi(&desc->irq_data);
}
static void mpc8xxx_irq_unmask(struct irq_data *d)
{
struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_data_get_irq_chip_data(d);
struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc;
unsigned long flags;
spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
setbits32(mm->regs + GPIO_IMR, mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
}
static void mpc8xxx_irq_mask(struct irq_data *d)
{
struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_data_get_irq_chip_data(d);
struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc;
unsigned long flags;
spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
clrbits32(mm->regs + GPIO_IMR, mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
}
static void mpc8xxx_irq_ack(struct irq_data *d)
{
struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_data_get_irq_chip_data(d);
struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc;
out_be32(mm->regs + GPIO_IER, mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
}
static int mpc8xxx_irq_set_type(struct irq_data *d, unsigned int flow_type)
{
struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_data_get_irq_chip_data(d);
struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc;
unsigned long flags;
switch (flow_type) {
case IRQ_TYPE_EDGE_FALLING:
spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
setbits32(mm->regs + GPIO_ICR,
mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
break;
case IRQ_TYPE_EDGE_BOTH:
spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
clrbits32(mm->regs + GPIO_ICR,
mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
break;
default:
return -EINVAL;
}
return 0;
}
static int mpc512x_irq_set_type(struct irq_data *d, unsigned int flow_type)
{
struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_data_get_irq_chip_data(d);
struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc;
unsigned long gpio = irqd_to_hwirq(d);
void __iomem *reg;
unsigned int shift;
unsigned long flags;
if (gpio < 16) {
reg = mm->regs + GPIO_ICR;
shift = (15 - gpio) * 2;
} else {
reg = mm->regs + GPIO_ICR2;
shift = (15 - (gpio % 16)) * 2;
}
switch (flow_type) {
case IRQ_TYPE_EDGE_FALLING:
case IRQ_TYPE_LEVEL_LOW:
spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
clrsetbits_be32(reg, 3 << shift, 2 << shift);
spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
break;
case IRQ_TYPE_EDGE_RISING:
case IRQ_TYPE_LEVEL_HIGH:
spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
clrsetbits_be32(reg, 3 << shift, 1 << shift);
spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
break;
case IRQ_TYPE_EDGE_BOTH:
spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
clrbits32(reg, 3 << shift);
spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
break;
default:
return -EINVAL;
}
return 0;
}
static struct irq_chip mpc8xxx_irq_chip = {
.name = "mpc8xxx-gpio",
.irq_unmask = mpc8xxx_irq_unmask,
.irq_mask = mpc8xxx_irq_mask,
.irq_ack = mpc8xxx_irq_ack,
.irq_set_type = mpc8xxx_irq_set_type,
};
static int mpc8xxx_gpio_irq_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t hw)
{
struct mpc8xxx_gpio_chip *mpc8xxx_gc = h->host_data;
if (mpc8xxx_gc->of_dev_id_data)
mpc8xxx_irq_chip.irq_set_type = mpc8xxx_gc->of_dev_id_data;
irq_set_chip_data(virq, h->host_data);
irq_set_chip_and_handler(virq, &mpc8xxx_irq_chip, handle_level_irq);
return 0;
}
static struct irq_domain_ops mpc8xxx_gpio_irq_ops = {
.map = mpc8xxx_gpio_irq_map,
.xlate = irq_domain_xlate_twocell,
};
static struct of_device_id mpc8xxx_gpio_ids[] __initdata = {
{ .compatible = "fsl,mpc8349-gpio", },
{ .compatible = "fsl,mpc8572-gpio", },
{ .compatible = "fsl,mpc8610-gpio", },
{ .compatible = "fsl,mpc5121-gpio", .data = mpc512x_irq_set_type, },
{ .compatible = "fsl,pq3-gpio", },
{ .compatible = "fsl,qoriq-gpio", },
{}
};
static void __init mpc8xxx_add_controller(struct device_node *np)
{
struct mpc8xxx_gpio_chip *mpc8xxx_gc;
struct of_mm_gpio_chip *mm_gc;
struct gpio_chip *gc;
const struct of_device_id *id;
unsigned hwirq;
int ret;
mpc8xxx_gc = kzalloc(sizeof(*mpc8xxx_gc), GFP_KERNEL);
if (!mpc8xxx_gc) {
ret = -ENOMEM;
goto err;
}
spin_lock_init(&mpc8xxx_gc->lock);
mm_gc = &mpc8xxx_gc->mm_gc;
2010-06-08 21:48:16 +08:00
gc = &mm_gc->gc;
mm_gc->save_regs = mpc8xxx_gpio_save_regs;
gc->ngpio = MPC8XXX_GPIO_PINS;
gc->direction_input = mpc8xxx_gpio_dir_in;
gc->direction_output = of_device_is_compatible(np, "fsl,mpc5121-gpio") ?
mpc5121_gpio_dir_out : mpc8xxx_gpio_dir_out;
gc->get = of_device_is_compatible(np, "fsl,mpc8572-gpio") ?
mpc8572_gpio_get : mpc8xxx_gpio_get;
gc->set = mpc8xxx_gpio_set;
gc->to_irq = mpc8xxx_gpio_to_irq;
ret = of_mm_gpiochip_add(np, mm_gc);
if (ret)
goto err;
hwirq = irq_of_parse_and_map(np, 0);
if (hwirq == NO_IRQ)
goto skip_irq;
mpc8xxx_gc->irq = irq_domain_add_linear(np, MPC8XXX_GPIO_PINS,
&mpc8xxx_gpio_irq_ops, mpc8xxx_gc);
if (!mpc8xxx_gc->irq)
goto skip_irq;
id = of_match_node(mpc8xxx_gpio_ids, np);
if (id)
mpc8xxx_gc->of_dev_id_data = id->data;
/* ack and mask all irqs */
out_be32(mm_gc->regs + GPIO_IER, 0xffffffff);
out_be32(mm_gc->regs + GPIO_IMR, 0);
irq_set_handler_data(hwirq, mpc8xxx_gc);
irq_set_chained_handler(hwirq, mpc8xxx_gpio_irq_cascade);
skip_irq:
return;
err:
pr_err("%s: registration failed with status %d\n",
np->full_name, ret);
kfree(mpc8xxx_gc);
return;
}
static int __init mpc8xxx_add_gpiochips(void)
{
struct device_node *np;
for_each_matching_node(np, mpc8xxx_gpio_ids)
mpc8xxx_add_controller(np);
return 0;
}
arch_initcall(mpc8xxx_add_gpiochips);