linux-sg2042/drivers/target/iscsi/iscsi_target_erl2.c

437 lines
12 KiB
C
Raw Normal View History

iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
/*******************************************************************************
* This file contains error recovery level two functions used by
* the iSCSI Target driver.
*
* (c) Copyright 2007-2013 Datera, Inc.
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
*
* Author: Nicholas A. Bellinger <nab@linux-iscsi.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
******************************************************************************/
#include <scsi/iscsi_proto.h>
#include <target/target_core_base.h>
#include <target/target_core_fabric.h>
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
#include <target/iscsi/iscsi_target_core.h>
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
#include "iscsi_target_datain_values.h"
#include "iscsi_target_util.h"
#include "iscsi_target_erl0.h"
#include "iscsi_target_erl1.h"
#include "iscsi_target_erl2.h"
#include "iscsi_target.h"
/*
* FIXME: Does RData SNACK apply here as well?
*/
void iscsit_create_conn_recovery_datain_values(
struct iscsi_cmd *cmd,
__be32 exp_data_sn)
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
{
u32 data_sn = 0;
struct iscsi_conn *conn = cmd->conn;
cmd->next_burst_len = 0;
cmd->read_data_done = 0;
while (be32_to_cpu(exp_data_sn) > data_sn) {
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
if ((cmd->next_burst_len +
conn->conn_ops->MaxRecvDataSegmentLength) <
conn->sess->sess_ops->MaxBurstLength) {
cmd->read_data_done +=
conn->conn_ops->MaxRecvDataSegmentLength;
cmd->next_burst_len +=
conn->conn_ops->MaxRecvDataSegmentLength;
} else {
cmd->read_data_done +=
(conn->sess->sess_ops->MaxBurstLength -
cmd->next_burst_len);
cmd->next_burst_len = 0;
}
data_sn++;
}
}
void iscsit_create_conn_recovery_dataout_values(
struct iscsi_cmd *cmd)
{
u32 write_data_done = 0;
struct iscsi_conn *conn = cmd->conn;
cmd->data_sn = 0;
cmd->next_burst_len = 0;
while (cmd->write_data_done > write_data_done) {
if ((write_data_done + conn->sess->sess_ops->MaxBurstLength) <=
cmd->write_data_done)
write_data_done += conn->sess->sess_ops->MaxBurstLength;
else
break;
}
cmd->write_data_done = write_data_done;
}
static int iscsit_attach_active_connection_recovery_entry(
struct iscsi_session *sess,
struct iscsi_conn_recovery *cr)
{
spin_lock(&sess->cr_a_lock);
list_add_tail(&cr->cr_list, &sess->cr_active_list);
spin_unlock(&sess->cr_a_lock);
return 0;
}
static int iscsit_attach_inactive_connection_recovery_entry(
struct iscsi_session *sess,
struct iscsi_conn_recovery *cr)
{
spin_lock(&sess->cr_i_lock);
list_add_tail(&cr->cr_list, &sess->cr_inactive_list);
sess->conn_recovery_count++;
pr_debug("Incremented connection recovery count to %u for"
" SID: %u\n", sess->conn_recovery_count, sess->sid);
spin_unlock(&sess->cr_i_lock);
return 0;
}
struct iscsi_conn_recovery *iscsit_get_inactive_connection_recovery_entry(
struct iscsi_session *sess,
u16 cid)
{
struct iscsi_conn_recovery *cr;
spin_lock(&sess->cr_i_lock);
list_for_each_entry(cr, &sess->cr_inactive_list, cr_list) {
if (cr->cid == cid) {
spin_unlock(&sess->cr_i_lock);
return cr;
}
}
spin_unlock(&sess->cr_i_lock);
return NULL;
}
void iscsit_free_connection_recovery_entires(struct iscsi_session *sess)
{
struct iscsi_cmd *cmd, *cmd_tmp;
struct iscsi_conn_recovery *cr, *cr_tmp;
spin_lock(&sess->cr_a_lock);
list_for_each_entry_safe(cr, cr_tmp, &sess->cr_active_list, cr_list) {
list_del(&cr->cr_list);
spin_unlock(&sess->cr_a_lock);
spin_lock(&cr->conn_recovery_cmd_lock);
list_for_each_entry_safe(cmd, cmd_tmp,
&cr->conn_recovery_cmd_list, i_conn_node) {
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
list_del_init(&cmd->i_conn_node);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
cmd->conn = NULL;
spin_unlock(&cr->conn_recovery_cmd_lock);
iscsi-target: Fix iscsit_free_cmd() se_cmd->cmd_kref shutdown handling With the introduction of target_get_sess_cmd() referencing counting for ISCSI_OP_SCSI_CMD processing with iser-target, iscsit_free_cmd() usage in traditional iscsi-target driver code now needs to be aware of the active I/O shutdown case when a remaining se_cmd->cmd_kref reference may exist after transport_generic_free_cmd() completes, requiring a final target_put_sess_cmd() to release iscsi_cmd descriptor memory. This patch changes iscsit_free_cmd() to invoke __iscsit_free_cmd() before transport_generic_free_cmd() -> target_put_sess_cmd(), and also avoids aquiring the per-connection queue locks for typical fast-path calls during normal ISTATE_REMOVE operation. Also update iscsit_free_cmd() usage throughout iscsi-target to use the new 'bool shutdown' parameter. This patch fixes a regression bug introduced during v3.10-rc1 in commit 3e1c81a95, that was causing the following WARNING to appear: [ 257.235153] ------------[ cut here]------------ [ 257.240314] WARNING: at kernel/softirq.c:160 local_bh_enable_ip+0x3c/0x86() [ 257.248089] Modules linked in: vhost_scsi ib_srpt ib_cm ib_sa ib_mad ib_core tcm_qla2xxx tcm_loop tcm_fc libfc iscsi_target_mod target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi loop acpi_cpufreq freq_table mperf kvm_intel kvm crc32c_intel button ehci_pci pcspkr joydev i2c_i801 microcode ext3 jbd raid10 raid456 async_pq async_xor xor async_memcpy async_raid6_recov raid6_pq async_tx raid1 raid0 linear igb hwmon i2c_algo_bit i2c_core ptp ata_piix libata qla2xxx uhci_hcd ehci_hcd mlx4_core scsi_transport_fc scsi_tgt pps_core [ 257.308748] CPU: 1 PID: 3295 Comm: iscsi_ttx Not tainted 3.10.0-rc2+ #103 [ 257.316329] Hardware name: Intel Corporation S5520HC/S5520HC, BIOS S5500.86B.01.00.0057.031020111721 03/10/2011 [ 257.327597] ffffffff814c24b7 ffff880458331b58 ffffffff8138eef2 ffff880458331b98 [ 257.335892] ffffffff8102c052 ffff880400000008 0000000000000000 ffff88085bdf0000 [ 257.344191] ffff88085bdf00d8 ffff88085bdf00e0 ffff88085bdf00f8 ffff880458331ba8 [ 257.352488] Call Trace: [ 257.355223] [<ffffffff8138eef2>] dump_stack+0x19/0x1f [ 257.360963] [<ffffffff8102c052>] warn_slowpath_common+0x62/0x7b [ 257.367669] [<ffffffff8102c080>] warn_slowpath_null+0x15/0x17 [ 257.374181] [<ffffffff81032345>] local_bh_enable_ip+0x3c/0x86 [ 257.380697] [<ffffffff813917fd>] _raw_spin_unlock_bh+0x10/0x12 [ 257.387311] [<ffffffffa029069c>] iscsit_free_r2ts_from_list+0x5e/0x67 [iscsi_target_mod] [ 257.396438] [<ffffffffa02906c5>] iscsit_release_cmd+0x20/0x223 [iscsi_target_mod] [ 257.404893] [<ffffffffa02977a4>] lio_release_cmd+0x3a/0x3e [iscsi_target_mod] [ 257.412964] [<ffffffffa01d59a1>] target_release_cmd_kref+0x7a/0x7c [target_core_mod] [ 257.421712] [<ffffffffa01d69bc>] target_put_sess_cmd+0x5f/0x7f [target_core_mod] [ 257.430071] [<ffffffffa01d6d6d>] transport_release_cmd+0x59/0x6f [target_core_mod] [ 257.438625] [<ffffffffa01d6eb4>] transport_put_cmd+0x131/0x140 [target_core_mod] [ 257.446985] [<ffffffffa01d6192>] ? transport_wait_for_tasks+0xfa/0x1d5 [target_core_mod] [ 257.456121] [<ffffffffa01d6f11>] transport_generic_free_cmd+0x4e/0x52 [target_core_mod] [ 257.465159] [<ffffffff81050537>] ? __migrate_task+0x110/0x110 [ 257.471674] [<ffffffffa02904ba>] iscsit_free_cmd+0x46/0x55 [iscsi_target_mod] [ 257.479741] [<ffffffffa0291edb>] iscsit_immediate_queue+0x301/0x353 [iscsi_target_mod] [ 257.488683] [<ffffffffa0292f7e>] iscsi_target_tx_thread+0x1c6/0x2a8 [iscsi_target_mod] [ 257.497623] [<ffffffff81047486>] ? wake_up_bit+0x25/0x25 [ 257.503652] [<ffffffffa0292db8>] ? iscsit_ack_from_expstatsn+0xd5/0xd5 [iscsi_target_mod] [ 257.512882] [<ffffffff81046f89>] kthread+0xb0/0xb8 [ 257.518329] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60 [ 257.526105] [<ffffffff81396fec>] ret_from_fork+0x7c/0xb0 [ 257.532133] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60 [ 257.539906] ---[ end trace 5520397d0f2e0800 ]--- Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-31 15:49:41 +08:00
iscsit_free_cmd(cmd, true);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
spin_lock(&cr->conn_recovery_cmd_lock);
}
spin_unlock(&cr->conn_recovery_cmd_lock);
spin_lock(&sess->cr_a_lock);
kfree(cr);
}
spin_unlock(&sess->cr_a_lock);
spin_lock(&sess->cr_i_lock);
list_for_each_entry_safe(cr, cr_tmp, &sess->cr_inactive_list, cr_list) {
list_del(&cr->cr_list);
spin_unlock(&sess->cr_i_lock);
spin_lock(&cr->conn_recovery_cmd_lock);
list_for_each_entry_safe(cmd, cmd_tmp,
&cr->conn_recovery_cmd_list, i_conn_node) {
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
list_del_init(&cmd->i_conn_node);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
cmd->conn = NULL;
spin_unlock(&cr->conn_recovery_cmd_lock);
iscsi-target: Fix iscsit_free_cmd() se_cmd->cmd_kref shutdown handling With the introduction of target_get_sess_cmd() referencing counting for ISCSI_OP_SCSI_CMD processing with iser-target, iscsit_free_cmd() usage in traditional iscsi-target driver code now needs to be aware of the active I/O shutdown case when a remaining se_cmd->cmd_kref reference may exist after transport_generic_free_cmd() completes, requiring a final target_put_sess_cmd() to release iscsi_cmd descriptor memory. This patch changes iscsit_free_cmd() to invoke __iscsit_free_cmd() before transport_generic_free_cmd() -> target_put_sess_cmd(), and also avoids aquiring the per-connection queue locks for typical fast-path calls during normal ISTATE_REMOVE operation. Also update iscsit_free_cmd() usage throughout iscsi-target to use the new 'bool shutdown' parameter. This patch fixes a regression bug introduced during v3.10-rc1 in commit 3e1c81a95, that was causing the following WARNING to appear: [ 257.235153] ------------[ cut here]------------ [ 257.240314] WARNING: at kernel/softirq.c:160 local_bh_enable_ip+0x3c/0x86() [ 257.248089] Modules linked in: vhost_scsi ib_srpt ib_cm ib_sa ib_mad ib_core tcm_qla2xxx tcm_loop tcm_fc libfc iscsi_target_mod target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi loop acpi_cpufreq freq_table mperf kvm_intel kvm crc32c_intel button ehci_pci pcspkr joydev i2c_i801 microcode ext3 jbd raid10 raid456 async_pq async_xor xor async_memcpy async_raid6_recov raid6_pq async_tx raid1 raid0 linear igb hwmon i2c_algo_bit i2c_core ptp ata_piix libata qla2xxx uhci_hcd ehci_hcd mlx4_core scsi_transport_fc scsi_tgt pps_core [ 257.308748] CPU: 1 PID: 3295 Comm: iscsi_ttx Not tainted 3.10.0-rc2+ #103 [ 257.316329] Hardware name: Intel Corporation S5520HC/S5520HC, BIOS S5500.86B.01.00.0057.031020111721 03/10/2011 [ 257.327597] ffffffff814c24b7 ffff880458331b58 ffffffff8138eef2 ffff880458331b98 [ 257.335892] ffffffff8102c052 ffff880400000008 0000000000000000 ffff88085bdf0000 [ 257.344191] ffff88085bdf00d8 ffff88085bdf00e0 ffff88085bdf00f8 ffff880458331ba8 [ 257.352488] Call Trace: [ 257.355223] [<ffffffff8138eef2>] dump_stack+0x19/0x1f [ 257.360963] [<ffffffff8102c052>] warn_slowpath_common+0x62/0x7b [ 257.367669] [<ffffffff8102c080>] warn_slowpath_null+0x15/0x17 [ 257.374181] [<ffffffff81032345>] local_bh_enable_ip+0x3c/0x86 [ 257.380697] [<ffffffff813917fd>] _raw_spin_unlock_bh+0x10/0x12 [ 257.387311] [<ffffffffa029069c>] iscsit_free_r2ts_from_list+0x5e/0x67 [iscsi_target_mod] [ 257.396438] [<ffffffffa02906c5>] iscsit_release_cmd+0x20/0x223 [iscsi_target_mod] [ 257.404893] [<ffffffffa02977a4>] lio_release_cmd+0x3a/0x3e [iscsi_target_mod] [ 257.412964] [<ffffffffa01d59a1>] target_release_cmd_kref+0x7a/0x7c [target_core_mod] [ 257.421712] [<ffffffffa01d69bc>] target_put_sess_cmd+0x5f/0x7f [target_core_mod] [ 257.430071] [<ffffffffa01d6d6d>] transport_release_cmd+0x59/0x6f [target_core_mod] [ 257.438625] [<ffffffffa01d6eb4>] transport_put_cmd+0x131/0x140 [target_core_mod] [ 257.446985] [<ffffffffa01d6192>] ? transport_wait_for_tasks+0xfa/0x1d5 [target_core_mod] [ 257.456121] [<ffffffffa01d6f11>] transport_generic_free_cmd+0x4e/0x52 [target_core_mod] [ 257.465159] [<ffffffff81050537>] ? __migrate_task+0x110/0x110 [ 257.471674] [<ffffffffa02904ba>] iscsit_free_cmd+0x46/0x55 [iscsi_target_mod] [ 257.479741] [<ffffffffa0291edb>] iscsit_immediate_queue+0x301/0x353 [iscsi_target_mod] [ 257.488683] [<ffffffffa0292f7e>] iscsi_target_tx_thread+0x1c6/0x2a8 [iscsi_target_mod] [ 257.497623] [<ffffffff81047486>] ? wake_up_bit+0x25/0x25 [ 257.503652] [<ffffffffa0292db8>] ? iscsit_ack_from_expstatsn+0xd5/0xd5 [iscsi_target_mod] [ 257.512882] [<ffffffff81046f89>] kthread+0xb0/0xb8 [ 257.518329] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60 [ 257.526105] [<ffffffff81396fec>] ret_from_fork+0x7c/0xb0 [ 257.532133] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60 [ 257.539906] ---[ end trace 5520397d0f2e0800 ]--- Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-31 15:49:41 +08:00
iscsit_free_cmd(cmd, true);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
spin_lock(&cr->conn_recovery_cmd_lock);
}
spin_unlock(&cr->conn_recovery_cmd_lock);
spin_lock(&sess->cr_i_lock);
kfree(cr);
}
spin_unlock(&sess->cr_i_lock);
}
int iscsit_remove_active_connection_recovery_entry(
struct iscsi_conn_recovery *cr,
struct iscsi_session *sess)
{
spin_lock(&sess->cr_a_lock);
list_del(&cr->cr_list);
sess->conn_recovery_count--;
pr_debug("Decremented connection recovery count to %u for"
" SID: %u\n", sess->conn_recovery_count, sess->sid);
spin_unlock(&sess->cr_a_lock);
kfree(cr);
return 0;
}
static void iscsit_remove_inactive_connection_recovery_entry(
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
struct iscsi_conn_recovery *cr,
struct iscsi_session *sess)
{
spin_lock(&sess->cr_i_lock);
list_del(&cr->cr_list);
spin_unlock(&sess->cr_i_lock);
}
/*
* Called with cr->conn_recovery_cmd_lock help.
*/
int iscsit_remove_cmd_from_connection_recovery(
struct iscsi_cmd *cmd,
struct iscsi_session *sess)
{
struct iscsi_conn_recovery *cr;
if (!cmd->cr) {
pr_err("struct iscsi_conn_recovery pointer for ITT: 0x%08x"
" is NULL!\n", cmd->init_task_tag);
BUG();
}
cr = cmd->cr;
list_del_init(&cmd->i_conn_node);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
return --cr->cmd_count;
}
void iscsit_discard_cr_cmds_by_expstatsn(
struct iscsi_conn_recovery *cr,
u32 exp_statsn)
{
u32 dropped_count = 0;
struct iscsi_cmd *cmd, *cmd_tmp;
struct iscsi_session *sess = cr->sess;
spin_lock(&cr->conn_recovery_cmd_lock);
list_for_each_entry_safe(cmd, cmd_tmp,
&cr->conn_recovery_cmd_list, i_conn_node) {
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
if (((cmd->deferred_i_state != ISTATE_SENT_STATUS) &&
(cmd->deferred_i_state != ISTATE_REMOVE)) ||
(cmd->stat_sn >= exp_statsn)) {
continue;
}
dropped_count++;
pr_debug("Dropping Acknowledged ITT: 0x%08x, StatSN:"
" 0x%08x, CID: %hu.\n", cmd->init_task_tag,
cmd->stat_sn, cr->cid);
iscsit_remove_cmd_from_connection_recovery(cmd, sess);
spin_unlock(&cr->conn_recovery_cmd_lock);
iscsi-target: Fix iscsit_free_cmd() se_cmd->cmd_kref shutdown handling With the introduction of target_get_sess_cmd() referencing counting for ISCSI_OP_SCSI_CMD processing with iser-target, iscsit_free_cmd() usage in traditional iscsi-target driver code now needs to be aware of the active I/O shutdown case when a remaining se_cmd->cmd_kref reference may exist after transport_generic_free_cmd() completes, requiring a final target_put_sess_cmd() to release iscsi_cmd descriptor memory. This patch changes iscsit_free_cmd() to invoke __iscsit_free_cmd() before transport_generic_free_cmd() -> target_put_sess_cmd(), and also avoids aquiring the per-connection queue locks for typical fast-path calls during normal ISTATE_REMOVE operation. Also update iscsit_free_cmd() usage throughout iscsi-target to use the new 'bool shutdown' parameter. This patch fixes a regression bug introduced during v3.10-rc1 in commit 3e1c81a95, that was causing the following WARNING to appear: [ 257.235153] ------------[ cut here]------------ [ 257.240314] WARNING: at kernel/softirq.c:160 local_bh_enable_ip+0x3c/0x86() [ 257.248089] Modules linked in: vhost_scsi ib_srpt ib_cm ib_sa ib_mad ib_core tcm_qla2xxx tcm_loop tcm_fc libfc iscsi_target_mod target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi loop acpi_cpufreq freq_table mperf kvm_intel kvm crc32c_intel button ehci_pci pcspkr joydev i2c_i801 microcode ext3 jbd raid10 raid456 async_pq async_xor xor async_memcpy async_raid6_recov raid6_pq async_tx raid1 raid0 linear igb hwmon i2c_algo_bit i2c_core ptp ata_piix libata qla2xxx uhci_hcd ehci_hcd mlx4_core scsi_transport_fc scsi_tgt pps_core [ 257.308748] CPU: 1 PID: 3295 Comm: iscsi_ttx Not tainted 3.10.0-rc2+ #103 [ 257.316329] Hardware name: Intel Corporation S5520HC/S5520HC, BIOS S5500.86B.01.00.0057.031020111721 03/10/2011 [ 257.327597] ffffffff814c24b7 ffff880458331b58 ffffffff8138eef2 ffff880458331b98 [ 257.335892] ffffffff8102c052 ffff880400000008 0000000000000000 ffff88085bdf0000 [ 257.344191] ffff88085bdf00d8 ffff88085bdf00e0 ffff88085bdf00f8 ffff880458331ba8 [ 257.352488] Call Trace: [ 257.355223] [<ffffffff8138eef2>] dump_stack+0x19/0x1f [ 257.360963] [<ffffffff8102c052>] warn_slowpath_common+0x62/0x7b [ 257.367669] [<ffffffff8102c080>] warn_slowpath_null+0x15/0x17 [ 257.374181] [<ffffffff81032345>] local_bh_enable_ip+0x3c/0x86 [ 257.380697] [<ffffffff813917fd>] _raw_spin_unlock_bh+0x10/0x12 [ 257.387311] [<ffffffffa029069c>] iscsit_free_r2ts_from_list+0x5e/0x67 [iscsi_target_mod] [ 257.396438] [<ffffffffa02906c5>] iscsit_release_cmd+0x20/0x223 [iscsi_target_mod] [ 257.404893] [<ffffffffa02977a4>] lio_release_cmd+0x3a/0x3e [iscsi_target_mod] [ 257.412964] [<ffffffffa01d59a1>] target_release_cmd_kref+0x7a/0x7c [target_core_mod] [ 257.421712] [<ffffffffa01d69bc>] target_put_sess_cmd+0x5f/0x7f [target_core_mod] [ 257.430071] [<ffffffffa01d6d6d>] transport_release_cmd+0x59/0x6f [target_core_mod] [ 257.438625] [<ffffffffa01d6eb4>] transport_put_cmd+0x131/0x140 [target_core_mod] [ 257.446985] [<ffffffffa01d6192>] ? transport_wait_for_tasks+0xfa/0x1d5 [target_core_mod] [ 257.456121] [<ffffffffa01d6f11>] transport_generic_free_cmd+0x4e/0x52 [target_core_mod] [ 257.465159] [<ffffffff81050537>] ? __migrate_task+0x110/0x110 [ 257.471674] [<ffffffffa02904ba>] iscsit_free_cmd+0x46/0x55 [iscsi_target_mod] [ 257.479741] [<ffffffffa0291edb>] iscsit_immediate_queue+0x301/0x353 [iscsi_target_mod] [ 257.488683] [<ffffffffa0292f7e>] iscsi_target_tx_thread+0x1c6/0x2a8 [iscsi_target_mod] [ 257.497623] [<ffffffff81047486>] ? wake_up_bit+0x25/0x25 [ 257.503652] [<ffffffffa0292db8>] ? iscsit_ack_from_expstatsn+0xd5/0xd5 [iscsi_target_mod] [ 257.512882] [<ffffffff81046f89>] kthread+0xb0/0xb8 [ 257.518329] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60 [ 257.526105] [<ffffffff81396fec>] ret_from_fork+0x7c/0xb0 [ 257.532133] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60 [ 257.539906] ---[ end trace 5520397d0f2e0800 ]--- Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-31 15:49:41 +08:00
iscsit_free_cmd(cmd, true);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
spin_lock(&cr->conn_recovery_cmd_lock);
}
spin_unlock(&cr->conn_recovery_cmd_lock);
pr_debug("Dropped %u total acknowledged commands on"
" CID: %hu less than old ExpStatSN: 0x%08x\n",
dropped_count, cr->cid, exp_statsn);
if (!cr->cmd_count) {
pr_debug("No commands to be reassigned for failed"
" connection CID: %hu on SID: %u\n",
cr->cid, sess->sid);
iscsit_remove_inactive_connection_recovery_entry(cr, sess);
iscsit_attach_active_connection_recovery_entry(sess, cr);
pr_debug("iSCSI connection recovery successful for CID:"
" %hu on SID: %u\n", cr->cid, sess->sid);
iscsit_remove_active_connection_recovery_entry(cr, sess);
} else {
iscsit_remove_inactive_connection_recovery_entry(cr, sess);
iscsit_attach_active_connection_recovery_entry(sess, cr);
}
}
int iscsit_discard_unacknowledged_ooo_cmdsns_for_conn(struct iscsi_conn *conn)
{
u32 dropped_count = 0;
struct iscsi_cmd *cmd, *cmd_tmp;
struct iscsi_ooo_cmdsn *ooo_cmdsn, *ooo_cmdsn_tmp;
struct iscsi_session *sess = conn->sess;
mutex_lock(&sess->cmdsn_mutex);
list_for_each_entry_safe(ooo_cmdsn, ooo_cmdsn_tmp,
&sess->sess_ooo_cmdsn_list, ooo_list) {
if (ooo_cmdsn->cid != conn->cid)
continue;
dropped_count++;
pr_debug("Dropping unacknowledged CmdSN:"
" 0x%08x during connection recovery on CID: %hu\n",
ooo_cmdsn->cmdsn, conn->cid);
iscsit_remove_ooo_cmdsn(sess, ooo_cmdsn);
}
mutex_unlock(&sess->cmdsn_mutex);
spin_lock_bh(&conn->cmd_lock);
list_for_each_entry_safe(cmd, cmd_tmp, &conn->conn_cmd_list, i_conn_node) {
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
if (!(cmd->cmd_flags & ICF_OOO_CMDSN))
continue;
list_del_init(&cmd->i_conn_node);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
spin_unlock_bh(&conn->cmd_lock);
iscsi-target: Fix iscsit_free_cmd() se_cmd->cmd_kref shutdown handling With the introduction of target_get_sess_cmd() referencing counting for ISCSI_OP_SCSI_CMD processing with iser-target, iscsit_free_cmd() usage in traditional iscsi-target driver code now needs to be aware of the active I/O shutdown case when a remaining se_cmd->cmd_kref reference may exist after transport_generic_free_cmd() completes, requiring a final target_put_sess_cmd() to release iscsi_cmd descriptor memory. This patch changes iscsit_free_cmd() to invoke __iscsit_free_cmd() before transport_generic_free_cmd() -> target_put_sess_cmd(), and also avoids aquiring the per-connection queue locks for typical fast-path calls during normal ISTATE_REMOVE operation. Also update iscsit_free_cmd() usage throughout iscsi-target to use the new 'bool shutdown' parameter. This patch fixes a regression bug introduced during v3.10-rc1 in commit 3e1c81a95, that was causing the following WARNING to appear: [ 257.235153] ------------[ cut here]------------ [ 257.240314] WARNING: at kernel/softirq.c:160 local_bh_enable_ip+0x3c/0x86() [ 257.248089] Modules linked in: vhost_scsi ib_srpt ib_cm ib_sa ib_mad ib_core tcm_qla2xxx tcm_loop tcm_fc libfc iscsi_target_mod target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi loop acpi_cpufreq freq_table mperf kvm_intel kvm crc32c_intel button ehci_pci pcspkr joydev i2c_i801 microcode ext3 jbd raid10 raid456 async_pq async_xor xor async_memcpy async_raid6_recov raid6_pq async_tx raid1 raid0 linear igb hwmon i2c_algo_bit i2c_core ptp ata_piix libata qla2xxx uhci_hcd ehci_hcd mlx4_core scsi_transport_fc scsi_tgt pps_core [ 257.308748] CPU: 1 PID: 3295 Comm: iscsi_ttx Not tainted 3.10.0-rc2+ #103 [ 257.316329] Hardware name: Intel Corporation S5520HC/S5520HC, BIOS S5500.86B.01.00.0057.031020111721 03/10/2011 [ 257.327597] ffffffff814c24b7 ffff880458331b58 ffffffff8138eef2 ffff880458331b98 [ 257.335892] ffffffff8102c052 ffff880400000008 0000000000000000 ffff88085bdf0000 [ 257.344191] ffff88085bdf00d8 ffff88085bdf00e0 ffff88085bdf00f8 ffff880458331ba8 [ 257.352488] Call Trace: [ 257.355223] [<ffffffff8138eef2>] dump_stack+0x19/0x1f [ 257.360963] [<ffffffff8102c052>] warn_slowpath_common+0x62/0x7b [ 257.367669] [<ffffffff8102c080>] warn_slowpath_null+0x15/0x17 [ 257.374181] [<ffffffff81032345>] local_bh_enable_ip+0x3c/0x86 [ 257.380697] [<ffffffff813917fd>] _raw_spin_unlock_bh+0x10/0x12 [ 257.387311] [<ffffffffa029069c>] iscsit_free_r2ts_from_list+0x5e/0x67 [iscsi_target_mod] [ 257.396438] [<ffffffffa02906c5>] iscsit_release_cmd+0x20/0x223 [iscsi_target_mod] [ 257.404893] [<ffffffffa02977a4>] lio_release_cmd+0x3a/0x3e [iscsi_target_mod] [ 257.412964] [<ffffffffa01d59a1>] target_release_cmd_kref+0x7a/0x7c [target_core_mod] [ 257.421712] [<ffffffffa01d69bc>] target_put_sess_cmd+0x5f/0x7f [target_core_mod] [ 257.430071] [<ffffffffa01d6d6d>] transport_release_cmd+0x59/0x6f [target_core_mod] [ 257.438625] [<ffffffffa01d6eb4>] transport_put_cmd+0x131/0x140 [target_core_mod] [ 257.446985] [<ffffffffa01d6192>] ? transport_wait_for_tasks+0xfa/0x1d5 [target_core_mod] [ 257.456121] [<ffffffffa01d6f11>] transport_generic_free_cmd+0x4e/0x52 [target_core_mod] [ 257.465159] [<ffffffff81050537>] ? __migrate_task+0x110/0x110 [ 257.471674] [<ffffffffa02904ba>] iscsit_free_cmd+0x46/0x55 [iscsi_target_mod] [ 257.479741] [<ffffffffa0291edb>] iscsit_immediate_queue+0x301/0x353 [iscsi_target_mod] [ 257.488683] [<ffffffffa0292f7e>] iscsi_target_tx_thread+0x1c6/0x2a8 [iscsi_target_mod] [ 257.497623] [<ffffffff81047486>] ? wake_up_bit+0x25/0x25 [ 257.503652] [<ffffffffa0292db8>] ? iscsit_ack_from_expstatsn+0xd5/0xd5 [iscsi_target_mod] [ 257.512882] [<ffffffff81046f89>] kthread+0xb0/0xb8 [ 257.518329] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60 [ 257.526105] [<ffffffff81396fec>] ret_from_fork+0x7c/0xb0 [ 257.532133] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60 [ 257.539906] ---[ end trace 5520397d0f2e0800 ]--- Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-31 15:49:41 +08:00
iscsit_free_cmd(cmd, true);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
spin_lock_bh(&conn->cmd_lock);
}
spin_unlock_bh(&conn->cmd_lock);
pr_debug("Dropped %u total unacknowledged commands on CID:"
" %hu for ExpCmdSN: 0x%08x.\n", dropped_count, conn->cid,
sess->exp_cmd_sn);
return 0;
}
int iscsit_prepare_cmds_for_realligance(struct iscsi_conn *conn)
{
u32 cmd_count = 0;
struct iscsi_cmd *cmd, *cmd_tmp;
struct iscsi_conn_recovery *cr;
/*
* Allocate an struct iscsi_conn_recovery for this connection.
* Each struct iscsi_cmd contains an struct iscsi_conn_recovery pointer
* (struct iscsi_cmd->cr) so we need to allocate this before preparing the
* connection's command list for connection recovery.
*/
cr = kzalloc(sizeof(struct iscsi_conn_recovery), GFP_KERNEL);
if (!cr) {
pr_err("Unable to allocate memory for"
" struct iscsi_conn_recovery.\n");
return -1;
}
INIT_LIST_HEAD(&cr->cr_list);
INIT_LIST_HEAD(&cr->conn_recovery_cmd_list);
spin_lock_init(&cr->conn_recovery_cmd_lock);
/*
* Only perform connection recovery on ISCSI_OP_SCSI_CMD or
* ISCSI_OP_NOOP_OUT opcodes. For all other opcodes call
* list_del_init(&cmd->i_conn_node); to release the command to the
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
* session pool and remove it from the connection's list.
*
* Also stop the DataOUT timer, which will be restarted after
* sending the TMR response.
*/
spin_lock_bh(&conn->cmd_lock);
list_for_each_entry_safe(cmd, cmd_tmp, &conn->conn_cmd_list, i_conn_node) {
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
if ((cmd->iscsi_opcode != ISCSI_OP_SCSI_CMD) &&
(cmd->iscsi_opcode != ISCSI_OP_NOOP_OUT)) {
pr_debug("Not performing realligence on"
" Opcode: 0x%02x, ITT: 0x%08x, CmdSN: 0x%08x,"
" CID: %hu\n", cmd->iscsi_opcode,
cmd->init_task_tag, cmd->cmd_sn, conn->cid);
list_del_init(&cmd->i_conn_node);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
spin_unlock_bh(&conn->cmd_lock);
iscsi-target: Fix iscsit_free_cmd() se_cmd->cmd_kref shutdown handling With the introduction of target_get_sess_cmd() referencing counting for ISCSI_OP_SCSI_CMD processing with iser-target, iscsit_free_cmd() usage in traditional iscsi-target driver code now needs to be aware of the active I/O shutdown case when a remaining se_cmd->cmd_kref reference may exist after transport_generic_free_cmd() completes, requiring a final target_put_sess_cmd() to release iscsi_cmd descriptor memory. This patch changes iscsit_free_cmd() to invoke __iscsit_free_cmd() before transport_generic_free_cmd() -> target_put_sess_cmd(), and also avoids aquiring the per-connection queue locks for typical fast-path calls during normal ISTATE_REMOVE operation. Also update iscsit_free_cmd() usage throughout iscsi-target to use the new 'bool shutdown' parameter. This patch fixes a regression bug introduced during v3.10-rc1 in commit 3e1c81a95, that was causing the following WARNING to appear: [ 257.235153] ------------[ cut here]------------ [ 257.240314] WARNING: at kernel/softirq.c:160 local_bh_enable_ip+0x3c/0x86() [ 257.248089] Modules linked in: vhost_scsi ib_srpt ib_cm ib_sa ib_mad ib_core tcm_qla2xxx tcm_loop tcm_fc libfc iscsi_target_mod target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi loop acpi_cpufreq freq_table mperf kvm_intel kvm crc32c_intel button ehci_pci pcspkr joydev i2c_i801 microcode ext3 jbd raid10 raid456 async_pq async_xor xor async_memcpy async_raid6_recov raid6_pq async_tx raid1 raid0 linear igb hwmon i2c_algo_bit i2c_core ptp ata_piix libata qla2xxx uhci_hcd ehci_hcd mlx4_core scsi_transport_fc scsi_tgt pps_core [ 257.308748] CPU: 1 PID: 3295 Comm: iscsi_ttx Not tainted 3.10.0-rc2+ #103 [ 257.316329] Hardware name: Intel Corporation S5520HC/S5520HC, BIOS S5500.86B.01.00.0057.031020111721 03/10/2011 [ 257.327597] ffffffff814c24b7 ffff880458331b58 ffffffff8138eef2 ffff880458331b98 [ 257.335892] ffffffff8102c052 ffff880400000008 0000000000000000 ffff88085bdf0000 [ 257.344191] ffff88085bdf00d8 ffff88085bdf00e0 ffff88085bdf00f8 ffff880458331ba8 [ 257.352488] Call Trace: [ 257.355223] [<ffffffff8138eef2>] dump_stack+0x19/0x1f [ 257.360963] [<ffffffff8102c052>] warn_slowpath_common+0x62/0x7b [ 257.367669] [<ffffffff8102c080>] warn_slowpath_null+0x15/0x17 [ 257.374181] [<ffffffff81032345>] local_bh_enable_ip+0x3c/0x86 [ 257.380697] [<ffffffff813917fd>] _raw_spin_unlock_bh+0x10/0x12 [ 257.387311] [<ffffffffa029069c>] iscsit_free_r2ts_from_list+0x5e/0x67 [iscsi_target_mod] [ 257.396438] [<ffffffffa02906c5>] iscsit_release_cmd+0x20/0x223 [iscsi_target_mod] [ 257.404893] [<ffffffffa02977a4>] lio_release_cmd+0x3a/0x3e [iscsi_target_mod] [ 257.412964] [<ffffffffa01d59a1>] target_release_cmd_kref+0x7a/0x7c [target_core_mod] [ 257.421712] [<ffffffffa01d69bc>] target_put_sess_cmd+0x5f/0x7f [target_core_mod] [ 257.430071] [<ffffffffa01d6d6d>] transport_release_cmd+0x59/0x6f [target_core_mod] [ 257.438625] [<ffffffffa01d6eb4>] transport_put_cmd+0x131/0x140 [target_core_mod] [ 257.446985] [<ffffffffa01d6192>] ? transport_wait_for_tasks+0xfa/0x1d5 [target_core_mod] [ 257.456121] [<ffffffffa01d6f11>] transport_generic_free_cmd+0x4e/0x52 [target_core_mod] [ 257.465159] [<ffffffff81050537>] ? __migrate_task+0x110/0x110 [ 257.471674] [<ffffffffa02904ba>] iscsit_free_cmd+0x46/0x55 [iscsi_target_mod] [ 257.479741] [<ffffffffa0291edb>] iscsit_immediate_queue+0x301/0x353 [iscsi_target_mod] [ 257.488683] [<ffffffffa0292f7e>] iscsi_target_tx_thread+0x1c6/0x2a8 [iscsi_target_mod] [ 257.497623] [<ffffffff81047486>] ? wake_up_bit+0x25/0x25 [ 257.503652] [<ffffffffa0292db8>] ? iscsit_ack_from_expstatsn+0xd5/0xd5 [iscsi_target_mod] [ 257.512882] [<ffffffff81046f89>] kthread+0xb0/0xb8 [ 257.518329] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60 [ 257.526105] [<ffffffff81396fec>] ret_from_fork+0x7c/0xb0 [ 257.532133] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60 [ 257.539906] ---[ end trace 5520397d0f2e0800 ]--- Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-31 15:49:41 +08:00
iscsit_free_cmd(cmd, true);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
spin_lock_bh(&conn->cmd_lock);
continue;
}
/*
* Special case where commands greater than or equal to
* the session's ExpCmdSN are attached to the connection
* list but not to the out of order CmdSN list. The one
* obvious case is when a command with immediate data
* attached must only check the CmdSN against ExpCmdSN
* after the data is received. The special case below
* is when the connection fails before data is received,
* but also may apply to other PDUs, so it has been
* made generic here.
*/
if (!(cmd->cmd_flags & ICF_OOO_CMDSN) && !cmd->immediate_cmd &&
iscsi_sna_gte(cmd->cmd_sn, conn->sess->exp_cmd_sn)) {
list_del_init(&cmd->i_conn_node);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
spin_unlock_bh(&conn->cmd_lock);
iscsi-target: Fix iscsit_free_cmd() se_cmd->cmd_kref shutdown handling With the introduction of target_get_sess_cmd() referencing counting for ISCSI_OP_SCSI_CMD processing with iser-target, iscsit_free_cmd() usage in traditional iscsi-target driver code now needs to be aware of the active I/O shutdown case when a remaining se_cmd->cmd_kref reference may exist after transport_generic_free_cmd() completes, requiring a final target_put_sess_cmd() to release iscsi_cmd descriptor memory. This patch changes iscsit_free_cmd() to invoke __iscsit_free_cmd() before transport_generic_free_cmd() -> target_put_sess_cmd(), and also avoids aquiring the per-connection queue locks for typical fast-path calls during normal ISTATE_REMOVE operation. Also update iscsit_free_cmd() usage throughout iscsi-target to use the new 'bool shutdown' parameter. This patch fixes a regression bug introduced during v3.10-rc1 in commit 3e1c81a95, that was causing the following WARNING to appear: [ 257.235153] ------------[ cut here]------------ [ 257.240314] WARNING: at kernel/softirq.c:160 local_bh_enable_ip+0x3c/0x86() [ 257.248089] Modules linked in: vhost_scsi ib_srpt ib_cm ib_sa ib_mad ib_core tcm_qla2xxx tcm_loop tcm_fc libfc iscsi_target_mod target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi loop acpi_cpufreq freq_table mperf kvm_intel kvm crc32c_intel button ehci_pci pcspkr joydev i2c_i801 microcode ext3 jbd raid10 raid456 async_pq async_xor xor async_memcpy async_raid6_recov raid6_pq async_tx raid1 raid0 linear igb hwmon i2c_algo_bit i2c_core ptp ata_piix libata qla2xxx uhci_hcd ehci_hcd mlx4_core scsi_transport_fc scsi_tgt pps_core [ 257.308748] CPU: 1 PID: 3295 Comm: iscsi_ttx Not tainted 3.10.0-rc2+ #103 [ 257.316329] Hardware name: Intel Corporation S5520HC/S5520HC, BIOS S5500.86B.01.00.0057.031020111721 03/10/2011 [ 257.327597] ffffffff814c24b7 ffff880458331b58 ffffffff8138eef2 ffff880458331b98 [ 257.335892] ffffffff8102c052 ffff880400000008 0000000000000000 ffff88085bdf0000 [ 257.344191] ffff88085bdf00d8 ffff88085bdf00e0 ffff88085bdf00f8 ffff880458331ba8 [ 257.352488] Call Trace: [ 257.355223] [<ffffffff8138eef2>] dump_stack+0x19/0x1f [ 257.360963] [<ffffffff8102c052>] warn_slowpath_common+0x62/0x7b [ 257.367669] [<ffffffff8102c080>] warn_slowpath_null+0x15/0x17 [ 257.374181] [<ffffffff81032345>] local_bh_enable_ip+0x3c/0x86 [ 257.380697] [<ffffffff813917fd>] _raw_spin_unlock_bh+0x10/0x12 [ 257.387311] [<ffffffffa029069c>] iscsit_free_r2ts_from_list+0x5e/0x67 [iscsi_target_mod] [ 257.396438] [<ffffffffa02906c5>] iscsit_release_cmd+0x20/0x223 [iscsi_target_mod] [ 257.404893] [<ffffffffa02977a4>] lio_release_cmd+0x3a/0x3e [iscsi_target_mod] [ 257.412964] [<ffffffffa01d59a1>] target_release_cmd_kref+0x7a/0x7c [target_core_mod] [ 257.421712] [<ffffffffa01d69bc>] target_put_sess_cmd+0x5f/0x7f [target_core_mod] [ 257.430071] [<ffffffffa01d6d6d>] transport_release_cmd+0x59/0x6f [target_core_mod] [ 257.438625] [<ffffffffa01d6eb4>] transport_put_cmd+0x131/0x140 [target_core_mod] [ 257.446985] [<ffffffffa01d6192>] ? transport_wait_for_tasks+0xfa/0x1d5 [target_core_mod] [ 257.456121] [<ffffffffa01d6f11>] transport_generic_free_cmd+0x4e/0x52 [target_core_mod] [ 257.465159] [<ffffffff81050537>] ? __migrate_task+0x110/0x110 [ 257.471674] [<ffffffffa02904ba>] iscsit_free_cmd+0x46/0x55 [iscsi_target_mod] [ 257.479741] [<ffffffffa0291edb>] iscsit_immediate_queue+0x301/0x353 [iscsi_target_mod] [ 257.488683] [<ffffffffa0292f7e>] iscsi_target_tx_thread+0x1c6/0x2a8 [iscsi_target_mod] [ 257.497623] [<ffffffff81047486>] ? wake_up_bit+0x25/0x25 [ 257.503652] [<ffffffffa0292db8>] ? iscsit_ack_from_expstatsn+0xd5/0xd5 [iscsi_target_mod] [ 257.512882] [<ffffffff81046f89>] kthread+0xb0/0xb8 [ 257.518329] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60 [ 257.526105] [<ffffffff81396fec>] ret_from_fork+0x7c/0xb0 [ 257.532133] [<ffffffff81046ed9>] ? kthread_freezable_should_stop+0x60/0x60 [ 257.539906] ---[ end trace 5520397d0f2e0800 ]--- Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-05-31 15:49:41 +08:00
iscsit_free_cmd(cmd, true);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
spin_lock_bh(&conn->cmd_lock);
continue;
}
cmd_count++;
pr_debug("Preparing Opcode: 0x%02x, ITT: 0x%08x,"
" CmdSN: 0x%08x, StatSN: 0x%08x, CID: %hu for"
" realligence.\n", cmd->iscsi_opcode,
cmd->init_task_tag, cmd->cmd_sn, cmd->stat_sn,
conn->cid);
cmd->deferred_i_state = cmd->i_state;
cmd->i_state = ISTATE_IN_CONNECTION_RECOVERY;
if (cmd->data_direction == DMA_TO_DEVICE)
iscsit_stop_dataout_timer(cmd);
cmd->sess = conn->sess;
list_del_init(&cmd->i_conn_node);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
spin_unlock_bh(&conn->cmd_lock);
iscsit_free_all_datain_reqs(cmd);
transport_wait_for_tasks(&cmd->se_cmd);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
/*
* Add the struct iscsi_cmd to the connection recovery cmd list
*/
spin_lock(&cr->conn_recovery_cmd_lock);
list_add_tail(&cmd->i_conn_node, &cr->conn_recovery_cmd_list);
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
spin_unlock(&cr->conn_recovery_cmd_lock);
spin_lock_bh(&conn->cmd_lock);
cmd->cr = cr;
cmd->conn = NULL;
}
spin_unlock_bh(&conn->cmd_lock);
/*
* Fill in the various values in the preallocated struct iscsi_conn_recovery.
*/
cr->cid = conn->cid;
cr->cmd_count = cmd_count;
cr->maxrecvdatasegmentlength = conn->conn_ops->MaxRecvDataSegmentLength;
cr->maxxmitdatasegmentlength = conn->conn_ops->MaxXmitDataSegmentLength;
iscsi-target: Add iSCSI fabric support for target v4.1 The Linux-iSCSI.org target module is a full featured in-kernel software implementation of iSCSI target mode (RFC-3720) for the current WIP mainline target v4.1 infrastructure code for the v3.1 kernel. More information can be found here: http://linux-iscsi.org/wiki/ISCSI This includes support for: * RFC-3720 defined request / response state machines and support for all defined iSCSI operation codes from Section 10.2.1.2 using libiscsi include/scsi/iscsi_proto.h PDU definitions * Target v4.1 compatible control plane using the generic layout in target_core_fabric_configfs.c and fabric dependent attributes within /sys/kernel/config/target/iscsi/ subdirectories. * Target v4.1 compatible iSCSI statistics based on RFC-4544 (iSCSI MIBS) * Support for IPv6 and IPv4 network portals in M:N mapping to TPGs * iSCSI Error Recovery Hierarchy support * Per iSCSI connection RX/TX thread pair scheduling affinity * crc32c + crc32c_intel SSEv4 instruction offload support using libcrypto * CHAP Authentication support using libcrypto * Conversion to use internal SGl allocation with iscsit_alloc_buffs() -> transport_generic_map_mem_to_cmd() (nab: Fix iscsi_proto.h struct scsi_lun usage from linux-next in commit: iscsi: Use struct scsi_lun in iscsi structs instead of u8[8]) (nab: Fix 32-bit compile warnings) Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andy Grover <agrover@redhat.com> Acked-by: Roland Dreier <roland@kernel.org> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23 14:43:04 +08:00
cr->sess = conn->sess;
iscsit_attach_inactive_connection_recovery_entry(conn->sess, cr);
return 0;
}
int iscsit_connection_recovery_transport_reset(struct iscsi_conn *conn)
{
atomic_set(&conn->connection_recovery, 1);
if (iscsit_close_connection(conn) < 0)
return -1;
return 0;
}