linux-sg2042/drivers/thermal/x86_pkg_temp_thermal.c

653 lines
16 KiB
C
Raw Normal View History

/*
* x86_pkg_temp_thermal driver
* Copyright (c) 2013, Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.
*
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/param.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/cpu.h>
#include <linux/smp.h>
#include <linux/slab.h>
#include <linux/pm.h>
#include <linux/thermal.h>
#include <linux/debugfs.h>
#include <asm/cpu_device_id.h>
#include <asm/mce.h>
/*
* Rate control delay: Idea is to introduce denounce effect
* This should be long enough to avoid reduce events, when
* threshold is set to a temperature, which is constantly
* violated, but at the short enough to take any action.
* The action can be remove threshold or change it to next
* interesting setting. Based on experiments, in around
* every 5 seconds under load will give us a significant
* temperature change.
*/
#define PKG_TEMP_THERMAL_NOTIFY_DELAY 5000
static int notify_delay_ms = PKG_TEMP_THERMAL_NOTIFY_DELAY;
module_param(notify_delay_ms, int, 0644);
MODULE_PARM_DESC(notify_delay_ms,
"User space notification delay in milli seconds.");
/* Number of trip points in thermal zone. Currently it can't
* be more than 2. MSR can allow setting and getting notifications
* for only 2 thresholds. This define enforces this, if there
* is some wrong values returned by cpuid for number of thresholds.
*/
#define MAX_NUMBER_OF_TRIPS 2
/* Limit number of package temp zones */
#define MAX_PKG_TEMP_ZONE_IDS 256
struct phy_dev_entry {
struct list_head list;
u16 phys_proc_id;
u16 first_cpu;
u32 tj_max;
int ref_cnt;
u32 start_pkg_therm_low;
u32 start_pkg_therm_high;
struct thermal_zone_device *tzone;
};
static struct thermal_zone_params pkg_temp_tz_params = {
.no_hwmon = true,
};
/* List maintaining number of package instances */
static LIST_HEAD(phy_dev_list);
static DEFINE_MUTEX(phy_dev_list_mutex);
/* Interrupt to work function schedule queue */
static DEFINE_PER_CPU(struct delayed_work, pkg_temp_thermal_threshold_work);
/* To track if the work is already scheduled on a package */
static u8 *pkg_work_scheduled;
/* Spin lock to prevent races with pkg_work_scheduled */
static spinlock_t pkg_work_lock;
static u16 max_phy_id;
/* Debug counters to show using debugfs */
static struct dentry *debugfs;
static unsigned int pkg_interrupt_cnt;
static unsigned int pkg_work_cnt;
static int pkg_temp_debugfs_init(void)
{
struct dentry *d;
debugfs = debugfs_create_dir("pkg_temp_thermal", NULL);
if (!debugfs)
return -ENOENT;
d = debugfs_create_u32("pkg_thres_interrupt", S_IRUGO, debugfs,
(u32 *)&pkg_interrupt_cnt);
if (!d)
goto err_out;
d = debugfs_create_u32("pkg_thres_work", S_IRUGO, debugfs,
(u32 *)&pkg_work_cnt);
if (!d)
goto err_out;
return 0;
err_out:
debugfs_remove_recursive(debugfs);
return -ENOENT;
}
static struct phy_dev_entry
*pkg_temp_thermal_get_phy_entry(unsigned int cpu)
{
u16 phys_proc_id = topology_physical_package_id(cpu);
struct phy_dev_entry *phy_ptr;
mutex_lock(&phy_dev_list_mutex);
list_for_each_entry(phy_ptr, &phy_dev_list, list)
if (phy_ptr->phys_proc_id == phys_proc_id) {
mutex_unlock(&phy_dev_list_mutex);
return phy_ptr;
}
mutex_unlock(&phy_dev_list_mutex);
return NULL;
}
/*
* tj-max is is interesting because threshold is set relative to this
* temperature.
*/
static int get_tj_max(int cpu, u32 *tj_max)
{
u32 eax, edx;
u32 val;
int err;
err = rdmsr_safe_on_cpu(cpu, MSR_IA32_TEMPERATURE_TARGET, &eax, &edx);
if (err)
goto err_ret;
else {
val = (eax >> 16) & 0xff;
if (val)
*tj_max = val * 1000;
else {
err = -EINVAL;
goto err_ret;
}
}
return 0;
err_ret:
*tj_max = 0;
return err;
}
thermal: consistently use int for temperatures The thermal code uses int, long and unsigned long for temperatures in different places. Using an unsigned type limits the thermal framework to positive temperatures without need. Also several drivers currently will report temperatures near UINT_MAX for temperatures below 0°C. This will probably immediately shut the machine down due to overtemperature if started below 0°C. 'long' is 64bit on several architectures. This is not needed since INT_MAX °mC is above the melting point of all known materials. Consistently use a plain 'int' for temperatures throughout the thermal code and the drivers. This only changes the places in the drivers where the temperature is passed around as pointer, when drivers internally use another type this is not changed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Peter Feuerer <peter@piie.net> Cc: Punit Agrawal <punit.agrawal@arm.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Jean Delvare <jdelvare@suse.de> Cc: Peter Feuerer <peter@piie.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-acpi@vger.kernel.org Cc: platform-driver-x86@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Darren Hart <dvhart@infradead.org> Cc: lm-sensors@lm-sensors.org Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-07-24 14:12:54 +08:00
static int sys_get_curr_temp(struct thermal_zone_device *tzd, int *temp)
{
u32 eax, edx;
struct phy_dev_entry *phy_dev_entry;
phy_dev_entry = tzd->devdata;
rdmsr_on_cpu(phy_dev_entry->first_cpu, MSR_IA32_PACKAGE_THERM_STATUS,
&eax, &edx);
if (eax & 0x80000000) {
*temp = phy_dev_entry->tj_max -
((eax >> 16) & 0x7f) * 1000;
thermal: consistently use int for temperatures The thermal code uses int, long and unsigned long for temperatures in different places. Using an unsigned type limits the thermal framework to positive temperatures without need. Also several drivers currently will report temperatures near UINT_MAX for temperatures below 0°C. This will probably immediately shut the machine down due to overtemperature if started below 0°C. 'long' is 64bit on several architectures. This is not needed since INT_MAX °mC is above the melting point of all known materials. Consistently use a plain 'int' for temperatures throughout the thermal code and the drivers. This only changes the places in the drivers where the temperature is passed around as pointer, when drivers internally use another type this is not changed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Peter Feuerer <peter@piie.net> Cc: Punit Agrawal <punit.agrawal@arm.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Jean Delvare <jdelvare@suse.de> Cc: Peter Feuerer <peter@piie.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-acpi@vger.kernel.org Cc: platform-driver-x86@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Darren Hart <dvhart@infradead.org> Cc: lm-sensors@lm-sensors.org Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-07-24 14:12:54 +08:00
pr_debug("sys_get_curr_temp %d\n", *temp);
return 0;
}
return -EINVAL;
}
static int sys_get_trip_temp(struct thermal_zone_device *tzd,
thermal: consistently use int for temperatures The thermal code uses int, long and unsigned long for temperatures in different places. Using an unsigned type limits the thermal framework to positive temperatures without need. Also several drivers currently will report temperatures near UINT_MAX for temperatures below 0°C. This will probably immediately shut the machine down due to overtemperature if started below 0°C. 'long' is 64bit on several architectures. This is not needed since INT_MAX °mC is above the melting point of all known materials. Consistently use a plain 'int' for temperatures throughout the thermal code and the drivers. This only changes the places in the drivers where the temperature is passed around as pointer, when drivers internally use another type this is not changed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Peter Feuerer <peter@piie.net> Cc: Punit Agrawal <punit.agrawal@arm.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Jean Delvare <jdelvare@suse.de> Cc: Peter Feuerer <peter@piie.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-acpi@vger.kernel.org Cc: platform-driver-x86@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Darren Hart <dvhart@infradead.org> Cc: lm-sensors@lm-sensors.org Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-07-24 14:12:54 +08:00
int trip, int *temp)
{
u32 eax, edx;
struct phy_dev_entry *phy_dev_entry;
u32 mask, shift;
unsigned long thres_reg_value;
int ret;
if (trip >= MAX_NUMBER_OF_TRIPS)
return -EINVAL;
phy_dev_entry = tzd->devdata;
if (trip) {
mask = THERM_MASK_THRESHOLD1;
shift = THERM_SHIFT_THRESHOLD1;
} else {
mask = THERM_MASK_THRESHOLD0;
shift = THERM_SHIFT_THRESHOLD0;
}
ret = rdmsr_on_cpu(phy_dev_entry->first_cpu,
MSR_IA32_PACKAGE_THERM_INTERRUPT, &eax, &edx);
if (ret < 0)
return -EINVAL;
thres_reg_value = (eax & mask) >> shift;
if (thres_reg_value)
*temp = phy_dev_entry->tj_max - thres_reg_value * 1000;
else
*temp = 0;
thermal: consistently use int for temperatures The thermal code uses int, long and unsigned long for temperatures in different places. Using an unsigned type limits the thermal framework to positive temperatures without need. Also several drivers currently will report temperatures near UINT_MAX for temperatures below 0°C. This will probably immediately shut the machine down due to overtemperature if started below 0°C. 'long' is 64bit on several architectures. This is not needed since INT_MAX °mC is above the melting point of all known materials. Consistently use a plain 'int' for temperatures throughout the thermal code and the drivers. This only changes the places in the drivers where the temperature is passed around as pointer, when drivers internally use another type this is not changed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Peter Feuerer <peter@piie.net> Cc: Punit Agrawal <punit.agrawal@arm.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Jean Delvare <jdelvare@suse.de> Cc: Peter Feuerer <peter@piie.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-acpi@vger.kernel.org Cc: platform-driver-x86@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Darren Hart <dvhart@infradead.org> Cc: lm-sensors@lm-sensors.org Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-07-24 14:12:54 +08:00
pr_debug("sys_get_trip_temp %d\n", *temp);
return 0;
}
static int sys_set_trip_temp(struct thermal_zone_device *tzd, int trip,
thermal: consistently use int for temperatures The thermal code uses int, long and unsigned long for temperatures in different places. Using an unsigned type limits the thermal framework to positive temperatures without need. Also several drivers currently will report temperatures near UINT_MAX for temperatures below 0°C. This will probably immediately shut the machine down due to overtemperature if started below 0°C. 'long' is 64bit on several architectures. This is not needed since INT_MAX °mC is above the melting point of all known materials. Consistently use a plain 'int' for temperatures throughout the thermal code and the drivers. This only changes the places in the drivers where the temperature is passed around as pointer, when drivers internally use another type this is not changed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Peter Feuerer <peter@piie.net> Cc: Punit Agrawal <punit.agrawal@arm.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Jean Delvare <jdelvare@suse.de> Cc: Peter Feuerer <peter@piie.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-acpi@vger.kernel.org Cc: platform-driver-x86@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Darren Hart <dvhart@infradead.org> Cc: lm-sensors@lm-sensors.org Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-07-24 14:12:54 +08:00
int temp)
{
u32 l, h;
struct phy_dev_entry *phy_dev_entry;
u32 mask, shift, intr;
int ret;
phy_dev_entry = tzd->devdata;
if (trip >= MAX_NUMBER_OF_TRIPS || temp >= phy_dev_entry->tj_max)
return -EINVAL;
ret = rdmsr_on_cpu(phy_dev_entry->first_cpu,
MSR_IA32_PACKAGE_THERM_INTERRUPT,
&l, &h);
if (ret < 0)
return -EINVAL;
if (trip) {
mask = THERM_MASK_THRESHOLD1;
shift = THERM_SHIFT_THRESHOLD1;
intr = THERM_INT_THRESHOLD1_ENABLE;
} else {
mask = THERM_MASK_THRESHOLD0;
shift = THERM_SHIFT_THRESHOLD0;
intr = THERM_INT_THRESHOLD0_ENABLE;
}
l &= ~mask;
/*
* When users space sets a trip temperature == 0, which is indication
* that, it is no longer interested in receiving notifications.
*/
if (!temp)
l &= ~intr;
else {
l |= (phy_dev_entry->tj_max - temp)/1000 << shift;
l |= intr;
}
return wrmsr_on_cpu(phy_dev_entry->first_cpu,
MSR_IA32_PACKAGE_THERM_INTERRUPT,
l, h);
}
static int sys_get_trip_type(struct thermal_zone_device *thermal,
int trip, enum thermal_trip_type *type)
{
*type = THERMAL_TRIP_PASSIVE;
return 0;
}
/* Thermal zone callback registry */
static struct thermal_zone_device_ops tzone_ops = {
.get_temp = sys_get_curr_temp,
.get_trip_temp = sys_get_trip_temp,
.get_trip_type = sys_get_trip_type,
.set_trip_temp = sys_set_trip_temp,
};
static bool pkg_temp_thermal_platform_thermal_rate_control(void)
{
return true;
}
/* Enable threshold interrupt on local package/cpu */
static inline void enable_pkg_thres_interrupt(void)
{
u32 l, h;
u8 thres_0, thres_1;
rdmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, l, h);
/* only enable/disable if it had valid threshold value */
thres_0 = (l & THERM_MASK_THRESHOLD0) >> THERM_SHIFT_THRESHOLD0;
thres_1 = (l & THERM_MASK_THRESHOLD1) >> THERM_SHIFT_THRESHOLD1;
if (thres_0)
l |= THERM_INT_THRESHOLD0_ENABLE;
if (thres_1)
l |= THERM_INT_THRESHOLD1_ENABLE;
wrmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, l, h);
}
/* Disable threshold interrupt on local package/cpu */
static inline void disable_pkg_thres_interrupt(void)
{
u32 l, h;
rdmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT, l, h);
wrmsr(MSR_IA32_PACKAGE_THERM_INTERRUPT,
l & (~THERM_INT_THRESHOLD0_ENABLE) &
(~THERM_INT_THRESHOLD1_ENABLE), h);
}
static void pkg_temp_thermal_threshold_work_fn(struct work_struct *work)
{
__u64 msr_val;
int cpu = smp_processor_id();
int phy_id = topology_physical_package_id(cpu);
struct phy_dev_entry *phdev = pkg_temp_thermal_get_phy_entry(cpu);
bool notify = false;
unsigned long flags;
if (!phdev)
return;
spin_lock_irqsave(&pkg_work_lock, flags);
++pkg_work_cnt;
if (unlikely(phy_id > max_phy_id)) {
spin_unlock_irqrestore(&pkg_work_lock, flags);
return;
}
pkg_work_scheduled[phy_id] = 0;
spin_unlock_irqrestore(&pkg_work_lock, flags);
enable_pkg_thres_interrupt();
rdmsrl(MSR_IA32_PACKAGE_THERM_STATUS, msr_val);
if (msr_val & THERM_LOG_THRESHOLD0) {
wrmsrl(MSR_IA32_PACKAGE_THERM_STATUS,
msr_val & ~THERM_LOG_THRESHOLD0);
notify = true;
}
if (msr_val & THERM_LOG_THRESHOLD1) {
wrmsrl(MSR_IA32_PACKAGE_THERM_STATUS,
msr_val & ~THERM_LOG_THRESHOLD1);
notify = true;
}
if (notify) {
pr_debug("thermal_zone_device_update\n");
thermal_zone_device_update(phdev->tzone,
THERMAL_EVENT_UNSPECIFIED);
}
}
static int pkg_temp_thermal_platform_thermal_notify(__u64 msr_val)
{
unsigned long flags;
int cpu = smp_processor_id();
int phy_id = topology_physical_package_id(cpu);
/*
* When a package is in interrupted state, all CPU's in that package
* are in the same interrupt state. So scheduling on any one CPU in
* the package is enough and simply return for others.
*/
spin_lock_irqsave(&pkg_work_lock, flags);
++pkg_interrupt_cnt;
if (unlikely(phy_id > max_phy_id) || unlikely(!pkg_work_scheduled) ||
pkg_work_scheduled[phy_id]) {
disable_pkg_thres_interrupt();
spin_unlock_irqrestore(&pkg_work_lock, flags);
return -EINVAL;
}
pkg_work_scheduled[phy_id] = 1;
spin_unlock_irqrestore(&pkg_work_lock, flags);
disable_pkg_thres_interrupt();
schedule_delayed_work_on(cpu,
&per_cpu(pkg_temp_thermal_threshold_work, cpu),
msecs_to_jiffies(notify_delay_ms));
return 0;
}
static int find_siblings_cpu(int cpu)
{
int i;
int id = topology_physical_package_id(cpu);
for_each_online_cpu(i)
if (i != cpu && topology_physical_package_id(i) == id)
return i;
return 0;
}
static int pkg_temp_thermal_device_add(unsigned int cpu)
{
int err;
u32 tj_max;
struct phy_dev_entry *phy_dev_entry;
int thres_count;
u32 eax, ebx, ecx, edx;
u8 *temp;
unsigned long flags;
cpuid(6, &eax, &ebx, &ecx, &edx);
thres_count = ebx & 0x07;
if (!thres_count)
return -ENODEV;
if (topology_physical_package_id(cpu) > MAX_PKG_TEMP_ZONE_IDS)
return -ENODEV;
thres_count = clamp_val(thres_count, 0, MAX_NUMBER_OF_TRIPS);
err = get_tj_max(cpu, &tj_max);
if (err)
goto err_ret;
mutex_lock(&phy_dev_list_mutex);
phy_dev_entry = kzalloc(sizeof(*phy_dev_entry), GFP_KERNEL);
if (!phy_dev_entry) {
err = -ENOMEM;
goto err_ret_unlock;
}
spin_lock_irqsave(&pkg_work_lock, flags);
if (topology_physical_package_id(cpu) > max_phy_id)
max_phy_id = topology_physical_package_id(cpu);
temp = krealloc(pkg_work_scheduled,
(max_phy_id+1) * sizeof(u8), GFP_ATOMIC);
if (!temp) {
spin_unlock_irqrestore(&pkg_work_lock, flags);
err = -ENOMEM;
goto err_ret_free;
}
pkg_work_scheduled = temp;
pkg_work_scheduled[topology_physical_package_id(cpu)] = 0;
spin_unlock_irqrestore(&pkg_work_lock, flags);
phy_dev_entry->phys_proc_id = topology_physical_package_id(cpu);
phy_dev_entry->first_cpu = cpu;
phy_dev_entry->tj_max = tj_max;
phy_dev_entry->ref_cnt = 1;
phy_dev_entry->tzone = thermal_zone_device_register("x86_pkg_temp",
thres_count,
(thres_count == MAX_NUMBER_OF_TRIPS) ?
0x03 : 0x01,
phy_dev_entry, &tzone_ops, &pkg_temp_tz_params, 0, 0);
if (IS_ERR(phy_dev_entry->tzone)) {
err = PTR_ERR(phy_dev_entry->tzone);
goto err_ret_free;
}
/* Store MSR value for package thermal interrupt, to restore at exit */
rdmsr_on_cpu(cpu, MSR_IA32_PACKAGE_THERM_INTERRUPT,
&phy_dev_entry->start_pkg_therm_low,
&phy_dev_entry->start_pkg_therm_high);
list_add_tail(&phy_dev_entry->list, &phy_dev_list);
pr_debug("pkg_temp_thermal_device_add :phy_id %d cpu %d\n",
phy_dev_entry->phys_proc_id, cpu);
mutex_unlock(&phy_dev_list_mutex);
return 0;
err_ret_free:
kfree(phy_dev_entry);
err_ret_unlock:
mutex_unlock(&phy_dev_list_mutex);
err_ret:
return err;
}
static int pkg_temp_thermal_device_remove(unsigned int cpu)
{
struct phy_dev_entry *n;
u16 phys_proc_id = topology_physical_package_id(cpu);
struct phy_dev_entry *phdev =
pkg_temp_thermal_get_phy_entry(cpu);
if (!phdev)
return -ENODEV;
mutex_lock(&phy_dev_list_mutex);
/* If we are loosing the first cpu for this package, we need change */
if (phdev->first_cpu == cpu) {
phdev->first_cpu = find_siblings_cpu(cpu);
pr_debug("thermal_device_remove: first cpu switched %d\n",
phdev->first_cpu);
}
/*
* It is possible that no siblings left as this was the last cpu
* going offline. We don't need to worry about this assignment
* as the phydev entry will be removed in this case and
* thermal zone is removed.
*/
--phdev->ref_cnt;
pr_debug("thermal_device_remove: pkg: %d cpu %d ref_cnt %d\n",
phys_proc_id, cpu, phdev->ref_cnt);
if (!phdev->ref_cnt)
list_for_each_entry_safe(phdev, n, &phy_dev_list, list) {
if (phdev->phys_proc_id == phys_proc_id) {
thermal_zone_device_unregister(phdev->tzone);
list_del(&phdev->list);
kfree(phdev);
break;
}
}
mutex_unlock(&phy_dev_list_mutex);
return 0;
}
static int get_core_online(unsigned int cpu)
{
struct cpuinfo_x86 *c = &cpu_data(cpu);
struct phy_dev_entry *phdev = pkg_temp_thermal_get_phy_entry(cpu);
/* Check if there is already an instance for this package */
if (!phdev) {
if (!cpu_has(c, X86_FEATURE_DTHERM) ||
!cpu_has(c, X86_FEATURE_PTS))
return -ENODEV;
if (pkg_temp_thermal_device_add(cpu))
return -ENODEV;
} else {
mutex_lock(&phy_dev_list_mutex);
++phdev->ref_cnt;
pr_debug("get_core_online: cpu %d ref_cnt %d\n",
cpu, phdev->ref_cnt);
mutex_unlock(&phy_dev_list_mutex);
}
INIT_DELAYED_WORK(&per_cpu(pkg_temp_thermal_threshold_work, cpu),
pkg_temp_thermal_threshold_work_fn);
pr_debug("get_core_online: cpu %d successful\n", cpu);
return 0;
}
static void put_core_offline(unsigned int cpu)
{
if (!pkg_temp_thermal_device_remove(cpu))
cancel_delayed_work_sync(
&per_cpu(pkg_temp_thermal_threshold_work, cpu));
pr_debug("put_core_offline: cpu %d\n", cpu);
}
static int pkg_temp_thermal_cpu_callback(struct notifier_block *nfb,
unsigned long action, void *hcpu)
{
unsigned int cpu = (unsigned long) hcpu;
switch (action & ~CPU_TASKS_FROZEN) {
case CPU_ONLINE:
case CPU_DOWN_FAILED:
get_core_online(cpu);
break;
case CPU_DOWN_PREPARE:
put_core_offline(cpu);
break;
}
return NOTIFY_OK;
}
static struct notifier_block pkg_temp_thermal_notifier __refdata = {
.notifier_call = pkg_temp_thermal_cpu_callback,
};
static const struct x86_cpu_id __initconst pkg_temp_thermal_ids[] = {
{ X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_PTS },
{}
};
MODULE_DEVICE_TABLE(x86cpu, pkg_temp_thermal_ids);
static int __init pkg_temp_thermal_init(void)
{
int i;
if (!x86_match_cpu(pkg_temp_thermal_ids))
return -ENODEV;
spin_lock_init(&pkg_work_lock);
platform_thermal_package_notify =
pkg_temp_thermal_platform_thermal_notify;
platform_thermal_package_rate_control =
pkg_temp_thermal_platform_thermal_rate_control;
cpu_notifier_register_begin();
for_each_online_cpu(i)
if (get_core_online(i))
goto err_ret;
__register_hotcpu_notifier(&pkg_temp_thermal_notifier);
cpu_notifier_register_done();
pkg_temp_debugfs_init(); /* Don't care if fails */
return 0;
err_ret:
for_each_online_cpu(i)
put_core_offline(i);
cpu_notifier_register_done();
kfree(pkg_work_scheduled);
platform_thermal_package_notify = NULL;
platform_thermal_package_rate_control = NULL;
return -ENODEV;
}
static void __exit pkg_temp_thermal_exit(void)
{
struct phy_dev_entry *phdev, *n;
int i;
cpu_notifier_register_begin();
__unregister_hotcpu_notifier(&pkg_temp_thermal_notifier);
mutex_lock(&phy_dev_list_mutex);
list_for_each_entry_safe(phdev, n, &phy_dev_list, list) {
/* Retore old MSR value for package thermal interrupt */
wrmsr_on_cpu(phdev->first_cpu,
MSR_IA32_PACKAGE_THERM_INTERRUPT,
phdev->start_pkg_therm_low,
phdev->start_pkg_therm_high);
thermal_zone_device_unregister(phdev->tzone);
list_del(&phdev->list);
kfree(phdev);
}
mutex_unlock(&phy_dev_list_mutex);
platform_thermal_package_notify = NULL;
platform_thermal_package_rate_control = NULL;
for_each_online_cpu(i)
cancel_delayed_work_sync(
&per_cpu(pkg_temp_thermal_threshold_work, i));
cpu_notifier_register_done();
kfree(pkg_work_scheduled);
debugfs_remove_recursive(debugfs);
}
module_init(pkg_temp_thermal_init)
module_exit(pkg_temp_thermal_exit)
MODULE_DESCRIPTION("X86 PKG TEMP Thermal Driver");
MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
MODULE_LICENSE("GPL v2");