linux-sg2042/Documentation/devicetree/bindings/clock/milbeaut-clock.yaml

# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/bindings/clock/milbeaut-clock.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Milbeaut SoCs Clock Controller Binding

maintainers:
  - Taichi Sugaya <sugaya.taichi@socionext.com>

description: |
  Milbeaut SoCs Clock controller is an integrated clock controller, which
  generates and supplies to all modules.

  This binding uses common clock bindings
  [1] Documentation/devicetree/bindings/clock/clock-bindings.txt

properties:
  compatible:
    oneOf:
      - items:
          - enum:
              - socionext,milbeaut-m10v-ccu
  clocks:
    maxItems: 1
    description: external clock

  '#clock-cells':
    const: 1

required:
  - compatible
  - reg
  - clocks
  - '#clock-cells'

examples:
  # Clock controller node:
  - |
    m10v-clk-ctrl@1d021000 {
        compatible = "socionext,milbeaut-m10v-clk-ccu";
        reg = <0x1d021000 0x4000>;
        #clock-cells = <1>;
        clocks = <&clki40mhz>;
    };

  # Required an external clock for Clock controller node:
  - |
    clocks {
        clki40mhz: clki40mhz {
            compatible = "fixed-clock";
            #clock-cells = <0>;
            clock-frequency = <40000000>;
        };
        /* other clocks */
    };

  # The clock consumer shall specify the desired clock-output of the clock
  # controller as below by specifying output-id in its "clk" phandle cell.
  # 2: uart
  # 4: 32-bit timer
  # 7: UHS-I/II
  - |
    serial@1e700010 {
        compatible = "socionext,milbeaut-usio-uart";
        reg = <0x1e700010 0x10>;
        interrupts = <0 141 0x4>, <0 149 0x4>;
        interrupt-names = "rx", "tx";
        clocks = <&clk 2>;
    };

...