linux-sg2042/arch/mips/ath79/mach-ubnt-xm.c

127 lines
2.8 KiB
C
Raw Normal View History

/*
* Ubiquiti Networks XM (rev 1.0) board support
*
* Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com>
*
* Derived from: mach-pb44.c
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/ath9k_platform.h>
#include <asm/mach-ath79/irq.h>
#include "machtypes.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-spi.h"
#include "pci.h"
#define UBNT_XM_GPIO_LED_L1 0
#define UBNT_XM_GPIO_LED_L2 1
#define UBNT_XM_GPIO_LED_L3 11
#define UBNT_XM_GPIO_LED_L4 7
#define UBNT_XM_GPIO_BTN_RESET 12
#define UBNT_XM_KEYS_POLL_INTERVAL 20
#define UBNT_XM_KEYS_DEBOUNCE_INTERVAL (3 * UBNT_XM_KEYS_POLL_INTERVAL)
#define UBNT_XM_EEPROM_ADDR (u8 *) KSEG1ADDR(0x1fff1000)
static struct gpio_led ubnt_xm_leds_gpio[] __initdata = {
{
.name = "ubnt-xm:red:link1",
.gpio = UBNT_XM_GPIO_LED_L1,
.active_low = 0,
}, {
.name = "ubnt-xm:orange:link2",
.gpio = UBNT_XM_GPIO_LED_L2,
.active_low = 0,
}, {
.name = "ubnt-xm:green:link3",
.gpio = UBNT_XM_GPIO_LED_L3,
.active_low = 0,
}, {
.name = "ubnt-xm:green:link4",
.gpio = UBNT_XM_GPIO_LED_L4,
.active_low = 0,
},
};
static struct gpio_keys_button ubnt_xm_gpio_keys[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = UBNT_XM_KEYS_DEBOUNCE_INTERVAL,
.gpio = UBNT_XM_GPIO_BTN_RESET,
.active_low = 1,
}
};
static struct spi_board_info ubnt_xm_spi_info[] = {
{
.bus_num = 0,
.chip_select = 0,
.max_speed_hz = 25000000,
.modalias = "mx25l6405d",
}
};
static struct ath79_spi_platform_data ubnt_xm_spi_data = {
.bus_num = 0,
.num_chipselect = 1,
};
#ifdef CONFIG_PCI
static struct ath9k_platform_data ubnt_xm_eeprom_data;
MIPS: ath79: allow to use board specific pci_plat_dev_init functions Th current implementation causes NULL pointer dereference if 'pci_data' is not set: pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1000ffff 64bit] pci 0000:00:00.0: BAR 0: set to [mem 0x10000000-0x1000ffff 64bit] (PCI address [0x10000000-0x1000ffff]) CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 802daca0, ra == 802e78a4 Oops[#1]: Cpu 0 $ 0 : 00000000 80420000 00000000 00000000 $ 4 : 00000000 00000000 00000001 00000001 $ 8 : 00000001 0000032c 81c54700 00000001 $12 : 0000032d 0000000f 00000000 ffffffff $16 : 81c14c00 00000001 802dac74 80195f98 $20 : 802ea050 00000000 00000000 00000000 $24 : 00000003 800617f0 $28 : 81c20000 81c21e70 00000000 802e78a4 Hi : 00000000 Lo : 4190ab00 epc : 802daca0 0x802daca0 Not tainted ra : 802e78a4 0x802e78a4 Status: 1000c003 KERNEL EXL IE Cause : 00800008 BadVA : 00000000 PrId : 00019374 (MIPS 24Kc) Modules linked in: Process swapper (pid: 1, threadinfo=81c20000, task=81c18000, tls=00000000) Stack : 00000000 8027d5d8 802e8ae0 00000000 01000000 802e8b5c 81c50600 00000000 802ff290 00000000 80420000 802ea0bc 00000000 00000000 80420000 802ff290 80420000 80060930 33390000 00000000 00002308 80140a80 00000028 802d0000 00000000 800ba024 802ff004 802ff0c8 802ff290 00000000 00000000 00000000 00000000 802d897c 01234567 7f827068 00000000 0045f798 00460000 00000000 This can be avoided by calling the 'ar724x_pci_add_data' function from the board specific setup code. However it makes no sense to use that function for every board, especially when the board does not needs to set the platform_data field of any PCI device. The patch allows the board setup code to specify a board specific function if that is required. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3499/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-03-14 17:36:09 +08:00
static int ubnt_xm_pci_plat_dev_init(struct pci_dev *dev)
{
switch (PCI_SLOT(dev->devfn)) {
case 0:
dev->dev.platform_data = &ubnt_xm_eeprom_data;
break;
}
return 0;
}
static void __init ubnt_xm_pci_init(void)
{
memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR,
sizeof(ubnt_xm_eeprom_data.eeprom_data));
MIPS: ath79: allow to use board specific pci_plat_dev_init functions Th current implementation causes NULL pointer dereference if 'pci_data' is not set: pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1000ffff 64bit] pci 0000:00:00.0: BAR 0: set to [mem 0x10000000-0x1000ffff 64bit] (PCI address [0x10000000-0x1000ffff]) CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 802daca0, ra == 802e78a4 Oops[#1]: Cpu 0 $ 0 : 00000000 80420000 00000000 00000000 $ 4 : 00000000 00000000 00000001 00000001 $ 8 : 00000001 0000032c 81c54700 00000001 $12 : 0000032d 0000000f 00000000 ffffffff $16 : 81c14c00 00000001 802dac74 80195f98 $20 : 802ea050 00000000 00000000 00000000 $24 : 00000003 800617f0 $28 : 81c20000 81c21e70 00000000 802e78a4 Hi : 00000000 Lo : 4190ab00 epc : 802daca0 0x802daca0 Not tainted ra : 802e78a4 0x802e78a4 Status: 1000c003 KERNEL EXL IE Cause : 00800008 BadVA : 00000000 PrId : 00019374 (MIPS 24Kc) Modules linked in: Process swapper (pid: 1, threadinfo=81c20000, task=81c18000, tls=00000000) Stack : 00000000 8027d5d8 802e8ae0 00000000 01000000 802e8b5c 81c50600 00000000 802ff290 00000000 80420000 802ea0bc 00000000 00000000 80420000 802ff290 80420000 80060930 33390000 00000000 00002308 80140a80 00000028 802d0000 00000000 800ba024 802ff004 802ff0c8 802ff290 00000000 00000000 00000000 00000000 802d897c 01234567 7f827068 00000000 0045f798 00460000 00000000 This can be avoided by calling the 'ar724x_pci_add_data' function from the board specific setup code. However it makes no sense to use that function for every board, especially when the board does not needs to set the platform_data field of any PCI device. The patch allows the board setup code to specify a board specific function if that is required. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3499/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-03-14 17:36:09 +08:00
ath79_pci_set_plat_dev_init(ubnt_xm_pci_plat_dev_init);
ath79_register_pci();
}
#else
static inline void ubnt_xm_pci_init(void) {}
#endif /* CONFIG_PCI */
static void __init ubnt_xm_init(void)
{
ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio),
ubnt_xm_leds_gpio);
ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL,
ARRAY_SIZE(ubnt_xm_gpio_keys),
ubnt_xm_gpio_keys);
ath79_register_spi(&ubnt_xm_spi_data, ubnt_xm_spi_info,
ARRAY_SIZE(ubnt_xm_spi_info));
ubnt_xm_pci_init();
}
MIPS_MACHINE(ATH79_MACH_UBNT_XM,
"UBNT-XM",
"Ubiquiti Networks XM (rev 1.0) board",
ubnt_xm_init);