linux-sg2042/arch/powerpc/kernel/iommu.c

1158 lines
29 KiB
C
Raw Normal View History

/*
* Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation
*
* Rewrite, cleanup, new allocation schemes, virtual merging:
* Copyright (C) 2004 Olof Johansson, IBM Corporation
* and Ben. Herrenschmidt, IBM Corporation
*
* Dynamic DMA mapping support, bus-independent parts.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/spinlock.h>
#include <linux/string.h>
#include <linux/dma-mapping.h>
#include <linux/bitmap.h>
#include <linux/iommu-helper.h>
#include <linux/crash_dump.h>
#include <linux/hash.h>
#include <linux/fault-inject.h>
#include <linux/pci.h>
#include <linux/iommu.h>
#include <linux/sched.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/iommu.h>
#include <asm/pci-bridge.h>
#include <asm/machdep.h>
#include <asm/kdump.h>
#include <asm/fadump.h>
#include <asm/vio.h>
#include <asm/tce.h>
#define DBG(...)
static int novmerge;
static void __iommu_free(struct iommu_table *, dma_addr_t, unsigned int);
static int __init setup_iommu(char *str)
{
if (!strcmp(str, "novmerge"))
novmerge = 1;
else if (!strcmp(str, "vmerge"))
novmerge = 0;
return 1;
}
__setup("iommu=", setup_iommu);
static DEFINE_PER_CPU(unsigned int, iommu_pool_hash);
/*
* We precalculate the hash to avoid doing it on every allocation.
*
* The hash is important to spread CPUs across all the pools. For example,
* on a POWER7 with 4 way SMT we want interrupts on the primary threads and
* with 4 pools all primary threads would map to the same pool.
*/
static int __init setup_iommu_pool_hash(void)
{
unsigned int i;
for_each_possible_cpu(i)
per_cpu(iommu_pool_hash, i) = hash_32(i, IOMMU_POOL_HASHBITS);
return 0;
}
subsys_initcall(setup_iommu_pool_hash);
#ifdef CONFIG_FAIL_IOMMU
static DECLARE_FAULT_ATTR(fail_iommu);
static int __init setup_fail_iommu(char *str)
{
return setup_fault_attr(&fail_iommu, str);
}
__setup("fail_iommu=", setup_fail_iommu);
static bool should_fail_iommu(struct device *dev)
{
return dev->archdata.fail_iommu && should_fail(&fail_iommu, 1);
}
static int __init fail_iommu_debugfs(void)
{
struct dentry *dir = fault_create_debugfs_attr("fail_iommu",
NULL, &fail_iommu);
return PTR_ERR_OR_ZERO(dir);
}
late_initcall(fail_iommu_debugfs);
static ssize_t fail_iommu_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
return sprintf(buf, "%d\n", dev->archdata.fail_iommu);
}
static ssize_t fail_iommu_store(struct device *dev,
struct device_attribute *attr, const char *buf,
size_t count)
{
int i;
if (count > 0 && sscanf(buf, "%d", &i) > 0)
dev->archdata.fail_iommu = (i == 0) ? 0 : 1;
return count;
}
static DEVICE_ATTR(fail_iommu, S_IRUGO|S_IWUSR, fail_iommu_show,
fail_iommu_store);
static int fail_iommu_bus_notify(struct notifier_block *nb,
unsigned long action, void *data)
{
struct device *dev = data;
if (action == BUS_NOTIFY_ADD_DEVICE) {
if (device_create_file(dev, &dev_attr_fail_iommu))
pr_warn("Unable to create IOMMU fault injection sysfs "
"entries\n");
} else if (action == BUS_NOTIFY_DEL_DEVICE) {
device_remove_file(dev, &dev_attr_fail_iommu);
}
return 0;
}
static struct notifier_block fail_iommu_bus_notifier = {
.notifier_call = fail_iommu_bus_notify
};
static int __init fail_iommu_setup(void)
{
#ifdef CONFIG_PCI
bus_register_notifier(&pci_bus_type, &fail_iommu_bus_notifier);
#endif
#ifdef CONFIG_IBMVIO
bus_register_notifier(&vio_bus_type, &fail_iommu_bus_notifier);
#endif
return 0;
}
/*
* Must execute after PCI and VIO subsystem have initialised but before
* devices are probed.
*/
arch_initcall(fail_iommu_setup);
#else
static inline bool should_fail_iommu(struct device *dev)
{
return false;
}
#endif
static unsigned long iommu_range_alloc(struct device *dev,
struct iommu_table *tbl,
unsigned long npages,
unsigned long *handle,
unsigned long mask,
unsigned int align_order)
{
unsigned long n, end, start;
unsigned long limit;
int largealloc = npages > 15;
int pass = 0;
unsigned long align_mask;
unsigned long boundary_size;
unsigned long flags;
unsigned int pool_nr;
struct iommu_pool *pool;
align_mask = 0xffffffffffffffffl >> (64 - align_order);
/* This allocator was derived from x86_64's bit string search */
/* Sanity check */
if (unlikely(npages == 0)) {
if (printk_ratelimit())
WARN_ON(1);
return DMA_ERROR_CODE;
}
if (should_fail_iommu(dev))
return DMA_ERROR_CODE;
/*
* We don't need to disable preemption here because any CPU can
* safely use any IOMMU pool.
*/
powerpc: Replace __get_cpu_var uses This still has not been merged and now powerpc is the only arch that does not have this change. Sorry about missing linuxppc-dev before. V2->V2 - Fix up to work against 3.18-rc1 __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to __this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to __this_cpu_inc(y) Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Paul Mackerras <paulus@samba.org> Signed-off-by: Christoph Lameter <cl@linux.com> [mpe: Fix build errors caused by set/or_softirq_pending(), and rework assignment in __set_breakpoint() to use memcpy().] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-10-22 04:23:25 +08:00
pool_nr = __this_cpu_read(iommu_pool_hash) & (tbl->nr_pools - 1);
if (largealloc)
pool = &(tbl->large_pool);
else
pool = &(tbl->pools[pool_nr]);
spin_lock_irqsave(&(pool->lock), flags);
again:
if ((pass == 0) && handle && *handle &&
(*handle >= pool->start) && (*handle < pool->end))
start = *handle;
else
start = pool->hint;
limit = pool->end;
/* The case below can happen if we have a small segment appended
* to a large, or when the previous alloc was at the very end of
* the available space. If so, go back to the initial start.
*/
if (start >= limit)
start = pool->start;
if (limit + tbl->it_offset > mask) {
limit = mask - tbl->it_offset + 1;
/* If we're constrained on address range, first try
* at the masked hint to avoid O(n) search complexity,
* but on second pass, start at 0 in pool 0.
*/
if ((start & mask) >= limit || pass > 0) {
spin_unlock(&(pool->lock));
pool = &(tbl->pools[0]);
spin_lock(&(pool->lock));
start = pool->start;
} else {
start &= mask;
}
}
if (dev)
boundary_size = ALIGN(dma_get_seg_boundary(dev) + 1,
1 << tbl->it_page_shift);
else
boundary_size = ALIGN(1UL << 32, 1 << tbl->it_page_shift);
/* 4GB boundary for iseries_hv_alloc and iseries_hv_map */
n = iommu_area_alloc(tbl->it_map, limit, start, npages, tbl->it_offset,
boundary_size >> tbl->it_page_shift, align_mask);
if (n == -1) {
if (likely(pass == 0)) {
/* First try the pool from the start */
pool->hint = pool->start;
pass++;
goto again;
} else if (pass <= tbl->nr_pools) {
/* Now try scanning all the other pools */
spin_unlock(&(pool->lock));
pool_nr = (pool_nr + 1) & (tbl->nr_pools - 1);
pool = &tbl->pools[pool_nr];
spin_lock(&(pool->lock));
pool->hint = pool->start;
pass++;
goto again;
} else {
/* Give up */
spin_unlock_irqrestore(&(pool->lock), flags);
return DMA_ERROR_CODE;
}
}
end = n + npages;
/* Bump the hint to a new block for small allocs. */
if (largealloc) {
/* Don't bump to new block to avoid fragmentation */
pool->hint = end;
} else {
/* Overflow will be taken care of at the next allocation */
pool->hint = (end + tbl->it_blocksize - 1) &
~(tbl->it_blocksize - 1);
}
/* Update handle for SG allocations */
if (handle)
*handle = end;
spin_unlock_irqrestore(&(pool->lock), flags);
return n;
}
static dma_addr_t iommu_alloc(struct device *dev, struct iommu_table *tbl,
void *page, unsigned int npages,
enum dma_data_direction direction,
unsigned long mask, unsigned int align_order,
struct dma_attrs *attrs)
{
unsigned long entry;
dma_addr_t ret = DMA_ERROR_CODE;
int build_fail;
entry = iommu_range_alloc(dev, tbl, npages, NULL, mask, align_order);
if (unlikely(entry == DMA_ERROR_CODE))
return DMA_ERROR_CODE;
entry += tbl->it_offset; /* Offset into real TCE table */
ret = entry << tbl->it_page_shift; /* Set the return dma address */
/* Put the TCEs in the HW table */
powerpc/iommu: Move tce_xxx callbacks from ppc_md to iommu_table This adds a iommu_table_ops struct and puts pointer to it into the iommu_table struct. This moves tce_build/tce_free/tce_get/tce_flush callbacks from ppc_md to the new struct where they really belong to. This adds the requirement for @it_ops to be initialized before calling iommu_init_table() to make sure that we do not leave any IOMMU table with iommu_table_ops uninitialized. This is not a parameter of iommu_init_table() though as there will be cases when iommu_init_table() will not be called on TCE tables, for example - VFIO. This does s/tce_build/set/, s/tce_free/clear/ and removes "tce_" redundant prefixes. This removes tce_xxx_rm handlers from ppc_md but does not add them to iommu_table_ops as this will be done later if we decide to support TCE hypercalls in real mode. This removes _vm callbacks as only virtual mode is supported by now so this also removes @rm parameter. For pSeries, this always uses tce_buildmulti_pSeriesLP/ tce_buildmulti_pSeriesLP. This changes multi callback to fall back to tce_build_pSeriesLP/tce_free_pSeriesLP if FW_FEATURE_MULTITCE is not present. The reason for this is we still have to support "multitce=off" boot parameter in disable_multitce() and we do not want to walk through all IOMMU tables in the system and replace "multi" callbacks with single ones. For powernv, this defines _ops per PHB type which are P5IOC2/IODA1/IODA2. This makes the callbacks for them public. Later patches will extend callbacks for IODA1/2. No change in behaviour is expected. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:06 +08:00
build_fail = tbl->it_ops->set(tbl, entry, npages,
(unsigned long)page &
IOMMU_PAGE_MASK(tbl), direction, attrs);
powerpc/iommu: Move tce_xxx callbacks from ppc_md to iommu_table This adds a iommu_table_ops struct and puts pointer to it into the iommu_table struct. This moves tce_build/tce_free/tce_get/tce_flush callbacks from ppc_md to the new struct where they really belong to. This adds the requirement for @it_ops to be initialized before calling iommu_init_table() to make sure that we do not leave any IOMMU table with iommu_table_ops uninitialized. This is not a parameter of iommu_init_table() though as there will be cases when iommu_init_table() will not be called on TCE tables, for example - VFIO. This does s/tce_build/set/, s/tce_free/clear/ and removes "tce_" redundant prefixes. This removes tce_xxx_rm handlers from ppc_md but does not add them to iommu_table_ops as this will be done later if we decide to support TCE hypercalls in real mode. This removes _vm callbacks as only virtual mode is supported by now so this also removes @rm parameter. For pSeries, this always uses tce_buildmulti_pSeriesLP/ tce_buildmulti_pSeriesLP. This changes multi callback to fall back to tce_build_pSeriesLP/tce_free_pSeriesLP if FW_FEATURE_MULTITCE is not present. The reason for this is we still have to support "multitce=off" boot parameter in disable_multitce() and we do not want to walk through all IOMMU tables in the system and replace "multi" callbacks with single ones. For powernv, this defines _ops per PHB type which are P5IOC2/IODA1/IODA2. This makes the callbacks for them public. Later patches will extend callbacks for IODA1/2. No change in behaviour is expected. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:06 +08:00
/* tbl->it_ops->set() only returns non-zero for transient errors.
* Clean up the table bitmap in this case and return
* DMA_ERROR_CODE. For all other errors the functionality is
* not altered.
*/
if (unlikely(build_fail)) {
__iommu_free(tbl, ret, npages);
return DMA_ERROR_CODE;
}
/* Flush/invalidate TLB caches if necessary */
powerpc/iommu: Move tce_xxx callbacks from ppc_md to iommu_table This adds a iommu_table_ops struct and puts pointer to it into the iommu_table struct. This moves tce_build/tce_free/tce_get/tce_flush callbacks from ppc_md to the new struct where they really belong to. This adds the requirement for @it_ops to be initialized before calling iommu_init_table() to make sure that we do not leave any IOMMU table with iommu_table_ops uninitialized. This is not a parameter of iommu_init_table() though as there will be cases when iommu_init_table() will not be called on TCE tables, for example - VFIO. This does s/tce_build/set/, s/tce_free/clear/ and removes "tce_" redundant prefixes. This removes tce_xxx_rm handlers from ppc_md but does not add them to iommu_table_ops as this will be done later if we decide to support TCE hypercalls in real mode. This removes _vm callbacks as only virtual mode is supported by now so this also removes @rm parameter. For pSeries, this always uses tce_buildmulti_pSeriesLP/ tce_buildmulti_pSeriesLP. This changes multi callback to fall back to tce_build_pSeriesLP/tce_free_pSeriesLP if FW_FEATURE_MULTITCE is not present. The reason for this is we still have to support "multitce=off" boot parameter in disable_multitce() and we do not want to walk through all IOMMU tables in the system and replace "multi" callbacks with single ones. For powernv, this defines _ops per PHB type which are P5IOC2/IODA1/IODA2. This makes the callbacks for them public. Later patches will extend callbacks for IODA1/2. No change in behaviour is expected. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:06 +08:00
if (tbl->it_ops->flush)
tbl->it_ops->flush(tbl);
/* Make sure updates are seen by hardware */
mb();
return ret;
}
static bool iommu_free_check(struct iommu_table *tbl, dma_addr_t dma_addr,
unsigned int npages)
{
unsigned long entry, free_entry;
entry = dma_addr >> tbl->it_page_shift;
free_entry = entry - tbl->it_offset;
if (((free_entry + npages) > tbl->it_size) ||
(entry < tbl->it_offset)) {
if (printk_ratelimit()) {
printk(KERN_INFO "iommu_free: invalid entry\n");
printk(KERN_INFO "\tentry = 0x%lx\n", entry);
printk(KERN_INFO "\tdma_addr = 0x%llx\n", (u64)dma_addr);
printk(KERN_INFO "\tTable = 0x%llx\n", (u64)tbl);
printk(KERN_INFO "\tbus# = 0x%llx\n", (u64)tbl->it_busno);
printk(KERN_INFO "\tsize = 0x%llx\n", (u64)tbl->it_size);
printk(KERN_INFO "\tstartOff = 0x%llx\n", (u64)tbl->it_offset);
printk(KERN_INFO "\tindex = 0x%llx\n", (u64)tbl->it_index);
WARN_ON(1);
}
return false;
}
return true;
}
static struct iommu_pool *get_pool(struct iommu_table *tbl,
unsigned long entry)
{
struct iommu_pool *p;
unsigned long largepool_start = tbl->large_pool.start;
/* The large pool is the last pool at the top of the table */
if (entry >= largepool_start) {
p = &tbl->large_pool;
} else {
unsigned int pool_nr = entry / tbl->poolsize;
BUG_ON(pool_nr > tbl->nr_pools);
p = &tbl->pools[pool_nr];
}
return p;
}
static void __iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr,
unsigned int npages)
{
unsigned long entry, free_entry;
unsigned long flags;
struct iommu_pool *pool;
entry = dma_addr >> tbl->it_page_shift;
free_entry = entry - tbl->it_offset;
pool = get_pool(tbl, free_entry);
if (!iommu_free_check(tbl, dma_addr, npages))
return;
powerpc/iommu: Move tce_xxx callbacks from ppc_md to iommu_table This adds a iommu_table_ops struct and puts pointer to it into the iommu_table struct. This moves tce_build/tce_free/tce_get/tce_flush callbacks from ppc_md to the new struct where they really belong to. This adds the requirement for @it_ops to be initialized before calling iommu_init_table() to make sure that we do not leave any IOMMU table with iommu_table_ops uninitialized. This is not a parameter of iommu_init_table() though as there will be cases when iommu_init_table() will not be called on TCE tables, for example - VFIO. This does s/tce_build/set/, s/tce_free/clear/ and removes "tce_" redundant prefixes. This removes tce_xxx_rm handlers from ppc_md but does not add them to iommu_table_ops as this will be done later if we decide to support TCE hypercalls in real mode. This removes _vm callbacks as only virtual mode is supported by now so this also removes @rm parameter. For pSeries, this always uses tce_buildmulti_pSeriesLP/ tce_buildmulti_pSeriesLP. This changes multi callback to fall back to tce_build_pSeriesLP/tce_free_pSeriesLP if FW_FEATURE_MULTITCE is not present. The reason for this is we still have to support "multitce=off" boot parameter in disable_multitce() and we do not want to walk through all IOMMU tables in the system and replace "multi" callbacks with single ones. For powernv, this defines _ops per PHB type which are P5IOC2/IODA1/IODA2. This makes the callbacks for them public. Later patches will extend callbacks for IODA1/2. No change in behaviour is expected. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:06 +08:00
tbl->it_ops->clear(tbl, entry, npages);
spin_lock_irqsave(&(pool->lock), flags);
bitmap_clear(tbl->it_map, free_entry, npages);
spin_unlock_irqrestore(&(pool->lock), flags);
}
static void iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr,
unsigned int npages)
{
__iommu_free(tbl, dma_addr, npages);
/* Make sure TLB cache is flushed if the HW needs it. We do
* not do an mb() here on purpose, it is not needed on any of
* the current platforms.
*/
powerpc/iommu: Move tce_xxx callbacks from ppc_md to iommu_table This adds a iommu_table_ops struct and puts pointer to it into the iommu_table struct. This moves tce_build/tce_free/tce_get/tce_flush callbacks from ppc_md to the new struct where they really belong to. This adds the requirement for @it_ops to be initialized before calling iommu_init_table() to make sure that we do not leave any IOMMU table with iommu_table_ops uninitialized. This is not a parameter of iommu_init_table() though as there will be cases when iommu_init_table() will not be called on TCE tables, for example - VFIO. This does s/tce_build/set/, s/tce_free/clear/ and removes "tce_" redundant prefixes. This removes tce_xxx_rm handlers from ppc_md but does not add them to iommu_table_ops as this will be done later if we decide to support TCE hypercalls in real mode. This removes _vm callbacks as only virtual mode is supported by now so this also removes @rm parameter. For pSeries, this always uses tce_buildmulti_pSeriesLP/ tce_buildmulti_pSeriesLP. This changes multi callback to fall back to tce_build_pSeriesLP/tce_free_pSeriesLP if FW_FEATURE_MULTITCE is not present. The reason for this is we still have to support "multitce=off" boot parameter in disable_multitce() and we do not want to walk through all IOMMU tables in the system and replace "multi" callbacks with single ones. For powernv, this defines _ops per PHB type which are P5IOC2/IODA1/IODA2. This makes the callbacks for them public. Later patches will extend callbacks for IODA1/2. No change in behaviour is expected. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:06 +08:00
if (tbl->it_ops->flush)
tbl->it_ops->flush(tbl);
}
int ppc_iommu_map_sg(struct device *dev, struct iommu_table *tbl,
struct scatterlist *sglist, int nelems,
unsigned long mask, enum dma_data_direction direction,
struct dma_attrs *attrs)
{
dma_addr_t dma_next = 0, dma_addr;
struct scatterlist *s, *outs, *segstart;
int outcount, incount, i, build_fail = 0;
unsigned int align;
unsigned long handle;
unsigned int max_seg_size;
BUG_ON(direction == DMA_NONE);
if ((nelems == 0) || !tbl)
return 0;
outs = s = segstart = &sglist[0];
outcount = 1;
incount = nelems;
handle = 0;
/* Init first segment length for backout at failure */
outs->dma_length = 0;
DBG("sg mapping %d elements:\n", nelems);
max_seg_size = dma_get_max_seg_size(dev);
for_each_sg(sglist, s, nelems, i) {
unsigned long vaddr, npages, entry, slen;
slen = s->length;
/* Sanity check */
if (slen == 0) {
dma_next = 0;
continue;
}
/* Allocate iommu entries for that segment */
vaddr = (unsigned long) sg_virt(s);
npages = iommu_num_pages(vaddr, slen, IOMMU_PAGE_SIZE(tbl));
align = 0;
if (tbl->it_page_shift < PAGE_SHIFT && slen >= PAGE_SIZE &&
(vaddr & ~PAGE_MASK) == 0)
align = PAGE_SHIFT - tbl->it_page_shift;
entry = iommu_range_alloc(dev, tbl, npages, &handle,
mask >> tbl->it_page_shift, align);
DBG(" - vaddr: %lx, size: %lx\n", vaddr, slen);
/* Handle failure */
if (unlikely(entry == DMA_ERROR_CODE)) {
if (printk_ratelimit())
dev_info(dev, "iommu_alloc failed, tbl %p "
"vaddr %lx npages %lu\n", tbl, vaddr,
npages);
goto failure;
}
/* Convert entry to a dma_addr_t */
entry += tbl->it_offset;
dma_addr = entry << tbl->it_page_shift;
dma_addr |= (s->offset & ~IOMMU_PAGE_MASK(tbl));
DBG(" - %lu pages, entry: %lx, dma_addr: %lx\n",
npages, entry, dma_addr);
/* Insert into HW table */
powerpc/iommu: Move tce_xxx callbacks from ppc_md to iommu_table This adds a iommu_table_ops struct and puts pointer to it into the iommu_table struct. This moves tce_build/tce_free/tce_get/tce_flush callbacks from ppc_md to the new struct where they really belong to. This adds the requirement for @it_ops to be initialized before calling iommu_init_table() to make sure that we do not leave any IOMMU table with iommu_table_ops uninitialized. This is not a parameter of iommu_init_table() though as there will be cases when iommu_init_table() will not be called on TCE tables, for example - VFIO. This does s/tce_build/set/, s/tce_free/clear/ and removes "tce_" redundant prefixes. This removes tce_xxx_rm handlers from ppc_md but does not add them to iommu_table_ops as this will be done later if we decide to support TCE hypercalls in real mode. This removes _vm callbacks as only virtual mode is supported by now so this also removes @rm parameter. For pSeries, this always uses tce_buildmulti_pSeriesLP/ tce_buildmulti_pSeriesLP. This changes multi callback to fall back to tce_build_pSeriesLP/tce_free_pSeriesLP if FW_FEATURE_MULTITCE is not present. The reason for this is we still have to support "multitce=off" boot parameter in disable_multitce() and we do not want to walk through all IOMMU tables in the system and replace "multi" callbacks with single ones. For powernv, this defines _ops per PHB type which are P5IOC2/IODA1/IODA2. This makes the callbacks for them public. Later patches will extend callbacks for IODA1/2. No change in behaviour is expected. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:06 +08:00
build_fail = tbl->it_ops->set(tbl, entry, npages,
vaddr & IOMMU_PAGE_MASK(tbl),
direction, attrs);
if(unlikely(build_fail))
goto failure;
/* If we are in an open segment, try merging */
if (segstart != s) {
DBG(" - trying merge...\n");
/* We cannot merge if:
* - allocated dma_addr isn't contiguous to previous allocation
*/
if (novmerge || (dma_addr != dma_next) ||
(outs->dma_length + s->length > max_seg_size)) {
/* Can't merge: create a new segment */
segstart = s;
outcount++;
outs = sg_next(outs);
DBG(" can't merge, new segment.\n");
} else {
outs->dma_length += s->length;
DBG(" merged, new len: %ux\n", outs->dma_length);
}
}
if (segstart == s) {
/* This is a new segment, fill entries */
DBG(" - filling new segment.\n");
outs->dma_address = dma_addr;
outs->dma_length = slen;
}
/* Calculate next page pointer for contiguous check */
dma_next = dma_addr + slen;
DBG(" - dma next is: %lx\n", dma_next);
}
/* Flush/invalidate TLB caches if necessary */
powerpc/iommu: Move tce_xxx callbacks from ppc_md to iommu_table This adds a iommu_table_ops struct and puts pointer to it into the iommu_table struct. This moves tce_build/tce_free/tce_get/tce_flush callbacks from ppc_md to the new struct where they really belong to. This adds the requirement for @it_ops to be initialized before calling iommu_init_table() to make sure that we do not leave any IOMMU table with iommu_table_ops uninitialized. This is not a parameter of iommu_init_table() though as there will be cases when iommu_init_table() will not be called on TCE tables, for example - VFIO. This does s/tce_build/set/, s/tce_free/clear/ and removes "tce_" redundant prefixes. This removes tce_xxx_rm handlers from ppc_md but does not add them to iommu_table_ops as this will be done later if we decide to support TCE hypercalls in real mode. This removes _vm callbacks as only virtual mode is supported by now so this also removes @rm parameter. For pSeries, this always uses tce_buildmulti_pSeriesLP/ tce_buildmulti_pSeriesLP. This changes multi callback to fall back to tce_build_pSeriesLP/tce_free_pSeriesLP if FW_FEATURE_MULTITCE is not present. The reason for this is we still have to support "multitce=off" boot parameter in disable_multitce() and we do not want to walk through all IOMMU tables in the system and replace "multi" callbacks with single ones. For powernv, this defines _ops per PHB type which are P5IOC2/IODA1/IODA2. This makes the callbacks for them public. Later patches will extend callbacks for IODA1/2. No change in behaviour is expected. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:06 +08:00
if (tbl->it_ops->flush)
tbl->it_ops->flush(tbl);
DBG("mapped %d elements:\n", outcount);
/* For the sake of ppc_iommu_unmap_sg, we clear out the length in the
* next entry of the sglist if we didn't fill the list completely
*/
if (outcount < incount) {
outs = sg_next(outs);
outs->dma_address = DMA_ERROR_CODE;
outs->dma_length = 0;
}
/* Make sure updates are seen by hardware */
mb();
return outcount;
failure:
for_each_sg(sglist, s, nelems, i) {
if (s->dma_length != 0) {
unsigned long vaddr, npages;
vaddr = s->dma_address & IOMMU_PAGE_MASK(tbl);
npages = iommu_num_pages(s->dma_address, s->dma_length,
IOMMU_PAGE_SIZE(tbl));
__iommu_free(tbl, vaddr, npages);
s->dma_address = DMA_ERROR_CODE;
s->dma_length = 0;
}
if (s == outs)
break;
}
return 0;
}
void ppc_iommu_unmap_sg(struct iommu_table *tbl, struct scatterlist *sglist,
int nelems, enum dma_data_direction direction,
struct dma_attrs *attrs)
{
struct scatterlist *sg;
BUG_ON(direction == DMA_NONE);
if (!tbl)
return;
sg = sglist;
while (nelems--) {
unsigned int npages;
dma_addr_t dma_handle = sg->dma_address;
if (sg->dma_length == 0)
break;
npages = iommu_num_pages(dma_handle, sg->dma_length,
IOMMU_PAGE_SIZE(tbl));
__iommu_free(tbl, dma_handle, npages);
sg = sg_next(sg);
}
/* Flush/invalidate TLBs if necessary. As for iommu_free(), we
* do not do an mb() here, the affected platforms do not need it
* when freeing.
*/
powerpc/iommu: Move tce_xxx callbacks from ppc_md to iommu_table This adds a iommu_table_ops struct and puts pointer to it into the iommu_table struct. This moves tce_build/tce_free/tce_get/tce_flush callbacks from ppc_md to the new struct where they really belong to. This adds the requirement for @it_ops to be initialized before calling iommu_init_table() to make sure that we do not leave any IOMMU table with iommu_table_ops uninitialized. This is not a parameter of iommu_init_table() though as there will be cases when iommu_init_table() will not be called on TCE tables, for example - VFIO. This does s/tce_build/set/, s/tce_free/clear/ and removes "tce_" redundant prefixes. This removes tce_xxx_rm handlers from ppc_md but does not add them to iommu_table_ops as this will be done later if we decide to support TCE hypercalls in real mode. This removes _vm callbacks as only virtual mode is supported by now so this also removes @rm parameter. For pSeries, this always uses tce_buildmulti_pSeriesLP/ tce_buildmulti_pSeriesLP. This changes multi callback to fall back to tce_build_pSeriesLP/tce_free_pSeriesLP if FW_FEATURE_MULTITCE is not present. The reason for this is we still have to support "multitce=off" boot parameter in disable_multitce() and we do not want to walk through all IOMMU tables in the system and replace "multi" callbacks with single ones. For powernv, this defines _ops per PHB type which are P5IOC2/IODA1/IODA2. This makes the callbacks for them public. Later patches will extend callbacks for IODA1/2. No change in behaviour is expected. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:06 +08:00
if (tbl->it_ops->flush)
tbl->it_ops->flush(tbl);
}
static void iommu_table_clear(struct iommu_table *tbl)
{
/*
* In case of firmware assisted dump system goes through clean
* reboot process at the time of system crash. Hence it's safe to
* clear the TCE entries if firmware assisted dump is active.
*/
if (!is_kdump_kernel() || is_fadump_active()) {
/* Clear the table in case firmware left allocations in it */
powerpc/iommu: Move tce_xxx callbacks from ppc_md to iommu_table This adds a iommu_table_ops struct and puts pointer to it into the iommu_table struct. This moves tce_build/tce_free/tce_get/tce_flush callbacks from ppc_md to the new struct where they really belong to. This adds the requirement for @it_ops to be initialized before calling iommu_init_table() to make sure that we do not leave any IOMMU table with iommu_table_ops uninitialized. This is not a parameter of iommu_init_table() though as there will be cases when iommu_init_table() will not be called on TCE tables, for example - VFIO. This does s/tce_build/set/, s/tce_free/clear/ and removes "tce_" redundant prefixes. This removes tce_xxx_rm handlers from ppc_md but does not add them to iommu_table_ops as this will be done later if we decide to support TCE hypercalls in real mode. This removes _vm callbacks as only virtual mode is supported by now so this also removes @rm parameter. For pSeries, this always uses tce_buildmulti_pSeriesLP/ tce_buildmulti_pSeriesLP. This changes multi callback to fall back to tce_build_pSeriesLP/tce_free_pSeriesLP if FW_FEATURE_MULTITCE is not present. The reason for this is we still have to support "multitce=off" boot parameter in disable_multitce() and we do not want to walk through all IOMMU tables in the system and replace "multi" callbacks with single ones. For powernv, this defines _ops per PHB type which are P5IOC2/IODA1/IODA2. This makes the callbacks for them public. Later patches will extend callbacks for IODA1/2. No change in behaviour is expected. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:06 +08:00
tbl->it_ops->clear(tbl, tbl->it_offset, tbl->it_size);
return;
}
#ifdef CONFIG_CRASH_DUMP
powerpc/iommu: Move tce_xxx callbacks from ppc_md to iommu_table This adds a iommu_table_ops struct and puts pointer to it into the iommu_table struct. This moves tce_build/tce_free/tce_get/tce_flush callbacks from ppc_md to the new struct where they really belong to. This adds the requirement for @it_ops to be initialized before calling iommu_init_table() to make sure that we do not leave any IOMMU table with iommu_table_ops uninitialized. This is not a parameter of iommu_init_table() though as there will be cases when iommu_init_table() will not be called on TCE tables, for example - VFIO. This does s/tce_build/set/, s/tce_free/clear/ and removes "tce_" redundant prefixes. This removes tce_xxx_rm handlers from ppc_md but does not add them to iommu_table_ops as this will be done later if we decide to support TCE hypercalls in real mode. This removes _vm callbacks as only virtual mode is supported by now so this also removes @rm parameter. For pSeries, this always uses tce_buildmulti_pSeriesLP/ tce_buildmulti_pSeriesLP. This changes multi callback to fall back to tce_build_pSeriesLP/tce_free_pSeriesLP if FW_FEATURE_MULTITCE is not present. The reason for this is we still have to support "multitce=off" boot parameter in disable_multitce() and we do not want to walk through all IOMMU tables in the system and replace "multi" callbacks with single ones. For powernv, this defines _ops per PHB type which are P5IOC2/IODA1/IODA2. This makes the callbacks for them public. Later patches will extend callbacks for IODA1/2. No change in behaviour is expected. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:06 +08:00
if (tbl->it_ops->get) {
unsigned long index, tceval, tcecount = 0;
/* Reserve the existing mappings left by the first kernel. */
for (index = 0; index < tbl->it_size; index++) {
powerpc/iommu: Move tce_xxx callbacks from ppc_md to iommu_table This adds a iommu_table_ops struct and puts pointer to it into the iommu_table struct. This moves tce_build/tce_free/tce_get/tce_flush callbacks from ppc_md to the new struct where they really belong to. This adds the requirement for @it_ops to be initialized before calling iommu_init_table() to make sure that we do not leave any IOMMU table with iommu_table_ops uninitialized. This is not a parameter of iommu_init_table() though as there will be cases when iommu_init_table() will not be called on TCE tables, for example - VFIO. This does s/tce_build/set/, s/tce_free/clear/ and removes "tce_" redundant prefixes. This removes tce_xxx_rm handlers from ppc_md but does not add them to iommu_table_ops as this will be done later if we decide to support TCE hypercalls in real mode. This removes _vm callbacks as only virtual mode is supported by now so this also removes @rm parameter. For pSeries, this always uses tce_buildmulti_pSeriesLP/ tce_buildmulti_pSeriesLP. This changes multi callback to fall back to tce_build_pSeriesLP/tce_free_pSeriesLP if FW_FEATURE_MULTITCE is not present. The reason for this is we still have to support "multitce=off" boot parameter in disable_multitce() and we do not want to walk through all IOMMU tables in the system and replace "multi" callbacks with single ones. For powernv, this defines _ops per PHB type which are P5IOC2/IODA1/IODA2. This makes the callbacks for them public. Later patches will extend callbacks for IODA1/2. No change in behaviour is expected. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:06 +08:00
tceval = tbl->it_ops->get(tbl, index + tbl->it_offset);
/*
* Freed TCE entry contains 0x7fffffffffffffff on JS20
*/
if (tceval && (tceval != 0x7fffffffffffffffUL)) {
__set_bit(index, tbl->it_map);
tcecount++;
}
}
if ((tbl->it_size - tcecount) < KDUMP_MIN_TCE_ENTRIES) {
printk(KERN_WARNING "TCE table is full; freeing ");
printk(KERN_WARNING "%d entries for the kdump boot\n",
KDUMP_MIN_TCE_ENTRIES);
for (index = tbl->it_size - KDUMP_MIN_TCE_ENTRIES;
index < tbl->it_size; index++)
__clear_bit(index, tbl->it_map);
}
}
#endif
}
/*
* Build a iommu_table structure. This contains a bit map which
* is used to manage allocation of the tce space.
*/
struct iommu_table *iommu_init_table(struct iommu_table *tbl, int nid)
{
unsigned long sz;
static int welcomed = 0;
struct page *page;
unsigned int i;
struct iommu_pool *p;
powerpc/iommu: Move tce_xxx callbacks from ppc_md to iommu_table This adds a iommu_table_ops struct and puts pointer to it into the iommu_table struct. This moves tce_build/tce_free/tce_get/tce_flush callbacks from ppc_md to the new struct where they really belong to. This adds the requirement for @it_ops to be initialized before calling iommu_init_table() to make sure that we do not leave any IOMMU table with iommu_table_ops uninitialized. This is not a parameter of iommu_init_table() though as there will be cases when iommu_init_table() will not be called on TCE tables, for example - VFIO. This does s/tce_build/set/, s/tce_free/clear/ and removes "tce_" redundant prefixes. This removes tce_xxx_rm handlers from ppc_md but does not add them to iommu_table_ops as this will be done later if we decide to support TCE hypercalls in real mode. This removes _vm callbacks as only virtual mode is supported by now so this also removes @rm parameter. For pSeries, this always uses tce_buildmulti_pSeriesLP/ tce_buildmulti_pSeriesLP. This changes multi callback to fall back to tce_build_pSeriesLP/tce_free_pSeriesLP if FW_FEATURE_MULTITCE is not present. The reason for this is we still have to support "multitce=off" boot parameter in disable_multitce() and we do not want to walk through all IOMMU tables in the system and replace "multi" callbacks with single ones. For powernv, this defines _ops per PHB type which are P5IOC2/IODA1/IODA2. This makes the callbacks for them public. Later patches will extend callbacks for IODA1/2. No change in behaviour is expected. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:06 +08:00
BUG_ON(!tbl->it_ops);
/* number of bytes needed for the bitmap */
sz = BITS_TO_LONGS(tbl->it_size) * sizeof(unsigned long);
page = alloc_pages_node(nid, GFP_KERNEL, get_order(sz));
if (!page)
panic("iommu_init_table: Can't allocate %ld bytes\n", sz);
tbl->it_map = page_address(page);
memset(tbl->it_map, 0, sz);
/*
* Reserve page 0 so it will not be used for any mappings.
* This avoids buggy drivers that consider page 0 to be invalid
* to crash the machine or even lose data.
*/
if (tbl->it_offset == 0)
set_bit(0, tbl->it_map);
/* We only split the IOMMU table if we have 1GB or more of space */
if ((tbl->it_size << tbl->it_page_shift) >= (1UL * 1024 * 1024 * 1024))
tbl->nr_pools = IOMMU_NR_POOLS;
else
tbl->nr_pools = 1;
/* We reserve the top 1/4 of the table for large allocations */
tbl->poolsize = (tbl->it_size * 3 / 4) / tbl->nr_pools;
for (i = 0; i < tbl->nr_pools; i++) {
p = &tbl->pools[i];
spin_lock_init(&(p->lock));
p->start = tbl->poolsize * i;
p->hint = p->start;
p->end = p->start + tbl->poolsize;
}
p = &tbl->large_pool;
spin_lock_init(&(p->lock));
p->start = tbl->poolsize * i;
p->hint = p->start;
p->end = tbl->it_size;
iommu_table_clear(tbl);
if (!welcomed) {
printk(KERN_INFO "IOMMU table initialized, virtual merging %s\n",
novmerge ? "disabled" : "enabled");
welcomed = 1;
}
return tbl;
}
void iommu_free_table(struct iommu_table *tbl, const char *node_name)
{
unsigned long bitmap_sz;
unsigned int order;
if (!tbl)
return;
if (!tbl->it_map) {
kfree(tbl);
return;
}
/*
* In case we have reserved the first bit, we should not emit
* the warning below.
*/
if (tbl->it_offset == 0)
clear_bit(0, tbl->it_map);
/* verify that table contains no entries */
if (!bitmap_empty(tbl->it_map, tbl->it_size))
pr_warn("%s: Unexpected TCEs for %s\n", __func__, node_name);
/* calculate bitmap size in bytes */
bitmap_sz = BITS_TO_LONGS(tbl->it_size) * sizeof(unsigned long);
/* free bitmap */
order = get_order(bitmap_sz);
free_pages((unsigned long) tbl->it_map, order);
/* free table */
kfree(tbl);
}
/* Creates TCEs for a user provided buffer. The user buffer must be
* contiguous real kernel storage (not vmalloc). The address passed here
* comprises a page address and offset into that page. The dma_addr_t
* returned will point to the same byte within the page as was passed in.
*/
dma_addr_t iommu_map_page(struct device *dev, struct iommu_table *tbl,
struct page *page, unsigned long offset, size_t size,
unsigned long mask, enum dma_data_direction direction,
struct dma_attrs *attrs)
{
dma_addr_t dma_handle = DMA_ERROR_CODE;
void *vaddr;
unsigned long uaddr;
unsigned int npages, align;
BUG_ON(direction == DMA_NONE);
vaddr = page_address(page) + offset;
uaddr = (unsigned long)vaddr;
npages = iommu_num_pages(uaddr, size, IOMMU_PAGE_SIZE(tbl));
if (tbl) {
align = 0;
if (tbl->it_page_shift < PAGE_SHIFT && size >= PAGE_SIZE &&
((unsigned long)vaddr & ~PAGE_MASK) == 0)
align = PAGE_SHIFT - tbl->it_page_shift;
dma_handle = iommu_alloc(dev, tbl, vaddr, npages, direction,
mask >> tbl->it_page_shift, align,
attrs);
if (dma_handle == DMA_ERROR_CODE) {
if (printk_ratelimit()) {
dev_info(dev, "iommu_alloc failed, tbl %p "
"vaddr %p npages %d\n", tbl, vaddr,
npages);
}
} else
dma_handle |= (uaddr & ~IOMMU_PAGE_MASK(tbl));
}
return dma_handle;
}
void iommu_unmap_page(struct iommu_table *tbl, dma_addr_t dma_handle,
size_t size, enum dma_data_direction direction,
struct dma_attrs *attrs)
{
unsigned int npages;
BUG_ON(direction == DMA_NONE);
if (tbl) {
npages = iommu_num_pages(dma_handle, size,
IOMMU_PAGE_SIZE(tbl));
iommu_free(tbl, dma_handle, npages);
}
}
/* Allocates a contiguous real buffer and creates mappings over it.
* Returns the virtual address of the buffer and sets dma_handle
* to the dma address (mapping) of the first page.
*/
void *iommu_alloc_coherent(struct device *dev, struct iommu_table *tbl,
size_t size, dma_addr_t *dma_handle,
unsigned long mask, gfp_t flag, int node)
{
void *ret = NULL;
dma_addr_t mapping;
unsigned int order;
unsigned int nio_pages, io_order;
struct page *page;
size = PAGE_ALIGN(size);
order = get_order(size);
/*
* Client asked for way too much space. This is checked later
* anyway. It is easier to debug here for the drivers than in
* the tce tables.
*/
if (order >= IOMAP_MAX_ORDER) {
dev_info(dev, "iommu_alloc_consistent size too large: 0x%lx\n",
size);
return NULL;
}
if (!tbl)
return NULL;
/* Alloc enough pages (and possibly more) */
page = alloc_pages_node(node, flag, order);
if (!page)
return NULL;
ret = page_address(page);
memset(ret, 0, size);
/* Set up tces to cover the allocated range */
nio_pages = size >> tbl->it_page_shift;
io_order = get_iommu_order(size, tbl);
mapping = iommu_alloc(dev, tbl, ret, nio_pages, DMA_BIDIRECTIONAL,
mask >> tbl->it_page_shift, io_order, NULL);
if (mapping == DMA_ERROR_CODE) {
free_pages((unsigned long)ret, order);
return NULL;
}
*dma_handle = mapping;
return ret;
}
void iommu_free_coherent(struct iommu_table *tbl, size_t size,
void *vaddr, dma_addr_t dma_handle)
{
if (tbl) {
unsigned int nio_pages;
size = PAGE_ALIGN(size);
nio_pages = size >> tbl->it_page_shift;
iommu_free(tbl, dma_handle, nio_pages);
size = PAGE_ALIGN(size);
free_pages((unsigned long)vaddr, get_order(size));
}
}
unsigned long iommu_direction_to_tce_perm(enum dma_data_direction dir)
{
switch (dir) {
case DMA_BIDIRECTIONAL:
return TCE_PCI_READ | TCE_PCI_WRITE;
case DMA_FROM_DEVICE:
return TCE_PCI_WRITE;
case DMA_TO_DEVICE:
return TCE_PCI_READ;
default:
return 0;
}
}
EXPORT_SYMBOL_GPL(iommu_direction_to_tce_perm);
#ifdef CONFIG_IOMMU_API
/*
* SPAPR TCE API
*/
static void group_release(void *iommu_data)
{
powerpc/spapr: vfio: Replace iommu_table with iommu_table_group Modern IBM POWERPC systems support multiple (currently two) TCE tables per IOMMU group (a.k.a. PE). This adds a iommu_table_group container for TCE tables. Right now just one table is supported. This defines iommu_table_group struct which stores pointers to iommu_group and iommu_table(s). This replaces iommu_table with iommu_table_group where iommu_table was used to identify a group: - iommu_register_group(); - iommudata of generic iommu_group; This removes @data from iommu_table as it_table_group provides same access to pnv_ioda_pe. For IODA, instead of embedding iommu_table, the new iommu_table_group keeps pointers to those. The iommu_table structs are allocated dynamically. For P5IOC2, both iommu_table_group and iommu_table are embedded into PE struct. As there is no EEH and SRIOV support for P5IOC2, iommu_free_table() should not be called on iommu_table struct pointers so we can keep it embedded in pnv_phb::p5ioc2. For pSeries, this replaces multiple calls of kzalloc_node() with a new iommu_pseries_alloc_group() helper and stores the table group struct pointer into the pci_dn struct. For release, a iommu_table_free_group() helper is added. This moves iommu_table struct allocation from SR-IOV code to the generic DMA initialization code in pnv_pci_ioda_setup_dma_pe and pnv_pci_ioda2_setup_dma_pe as this is where DMA is actually initialized. This change is here because those lines had to be changed anyway. This should cause no behavioural change. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:08 +08:00
struct iommu_table_group *table_group = iommu_data;
table_group->group = NULL;
}
powerpc/spapr: vfio: Replace iommu_table with iommu_table_group Modern IBM POWERPC systems support multiple (currently two) TCE tables per IOMMU group (a.k.a. PE). This adds a iommu_table_group container for TCE tables. Right now just one table is supported. This defines iommu_table_group struct which stores pointers to iommu_group and iommu_table(s). This replaces iommu_table with iommu_table_group where iommu_table was used to identify a group: - iommu_register_group(); - iommudata of generic iommu_group; This removes @data from iommu_table as it_table_group provides same access to pnv_ioda_pe. For IODA, instead of embedding iommu_table, the new iommu_table_group keeps pointers to those. The iommu_table structs are allocated dynamically. For P5IOC2, both iommu_table_group and iommu_table are embedded into PE struct. As there is no EEH and SRIOV support for P5IOC2, iommu_free_table() should not be called on iommu_table struct pointers so we can keep it embedded in pnv_phb::p5ioc2. For pSeries, this replaces multiple calls of kzalloc_node() with a new iommu_pseries_alloc_group() helper and stores the table group struct pointer into the pci_dn struct. For release, a iommu_table_free_group() helper is added. This moves iommu_table struct allocation from SR-IOV code to the generic DMA initialization code in pnv_pci_ioda_setup_dma_pe and pnv_pci_ioda2_setup_dma_pe as this is where DMA is actually initialized. This change is here because those lines had to be changed anyway. This should cause no behavioural change. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:08 +08:00
void iommu_register_group(struct iommu_table_group *table_group,
int pci_domain_number, unsigned long pe_num)
{
struct iommu_group *grp;
char *name;
grp = iommu_group_alloc();
if (IS_ERR(grp)) {
pr_warn("powerpc iommu api: cannot create new group, err=%ld\n",
PTR_ERR(grp));
return;
}
powerpc/spapr: vfio: Replace iommu_table with iommu_table_group Modern IBM POWERPC systems support multiple (currently two) TCE tables per IOMMU group (a.k.a. PE). This adds a iommu_table_group container for TCE tables. Right now just one table is supported. This defines iommu_table_group struct which stores pointers to iommu_group and iommu_table(s). This replaces iommu_table with iommu_table_group where iommu_table was used to identify a group: - iommu_register_group(); - iommudata of generic iommu_group; This removes @data from iommu_table as it_table_group provides same access to pnv_ioda_pe. For IODA, instead of embedding iommu_table, the new iommu_table_group keeps pointers to those. The iommu_table structs are allocated dynamically. For P5IOC2, both iommu_table_group and iommu_table are embedded into PE struct. As there is no EEH and SRIOV support for P5IOC2, iommu_free_table() should not be called on iommu_table struct pointers so we can keep it embedded in pnv_phb::p5ioc2. For pSeries, this replaces multiple calls of kzalloc_node() with a new iommu_pseries_alloc_group() helper and stores the table group struct pointer into the pci_dn struct. For release, a iommu_table_free_group() helper is added. This moves iommu_table struct allocation from SR-IOV code to the generic DMA initialization code in pnv_pci_ioda_setup_dma_pe and pnv_pci_ioda2_setup_dma_pe as this is where DMA is actually initialized. This change is here because those lines had to be changed anyway. This should cause no behavioural change. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:08 +08:00
table_group->group = grp;
iommu_group_set_iommudata(grp, table_group, group_release);
name = kasprintf(GFP_KERNEL, "domain%d-pe%lx",
pci_domain_number, pe_num);
if (!name)
return;
iommu_group_set_name(grp, name);
kfree(name);
}
enum dma_data_direction iommu_tce_direction(unsigned long tce)
{
if ((tce & TCE_PCI_READ) && (tce & TCE_PCI_WRITE))
return DMA_BIDIRECTIONAL;
else if (tce & TCE_PCI_READ)
return DMA_TO_DEVICE;
else if (tce & TCE_PCI_WRITE)
return DMA_FROM_DEVICE;
else
return DMA_NONE;
}
EXPORT_SYMBOL_GPL(iommu_tce_direction);
void iommu_flush_tce(struct iommu_table *tbl)
{
/* Flush/invalidate TLB caches if necessary */
powerpc/iommu: Move tce_xxx callbacks from ppc_md to iommu_table This adds a iommu_table_ops struct and puts pointer to it into the iommu_table struct. This moves tce_build/tce_free/tce_get/tce_flush callbacks from ppc_md to the new struct where they really belong to. This adds the requirement for @it_ops to be initialized before calling iommu_init_table() to make sure that we do not leave any IOMMU table with iommu_table_ops uninitialized. This is not a parameter of iommu_init_table() though as there will be cases when iommu_init_table() will not be called on TCE tables, for example - VFIO. This does s/tce_build/set/, s/tce_free/clear/ and removes "tce_" redundant prefixes. This removes tce_xxx_rm handlers from ppc_md but does not add them to iommu_table_ops as this will be done later if we decide to support TCE hypercalls in real mode. This removes _vm callbacks as only virtual mode is supported by now so this also removes @rm parameter. For pSeries, this always uses tce_buildmulti_pSeriesLP/ tce_buildmulti_pSeriesLP. This changes multi callback to fall back to tce_build_pSeriesLP/tce_free_pSeriesLP if FW_FEATURE_MULTITCE is not present. The reason for this is we still have to support "multitce=off" boot parameter in disable_multitce() and we do not want to walk through all IOMMU tables in the system and replace "multi" callbacks with single ones. For powernv, this defines _ops per PHB type which are P5IOC2/IODA1/IODA2. This makes the callbacks for them public. Later patches will extend callbacks for IODA1/2. No change in behaviour is expected. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:06 +08:00
if (tbl->it_ops->flush)
tbl->it_ops->flush(tbl);
/* Make sure updates are seen by hardware */
mb();
}
EXPORT_SYMBOL_GPL(iommu_flush_tce);
int iommu_tce_clear_param_check(struct iommu_table *tbl,
unsigned long ioba, unsigned long tce_value,
unsigned long npages)
{
powerpc/iommu: Move tce_xxx callbacks from ppc_md to iommu_table This adds a iommu_table_ops struct and puts pointer to it into the iommu_table struct. This moves tce_build/tce_free/tce_get/tce_flush callbacks from ppc_md to the new struct where they really belong to. This adds the requirement for @it_ops to be initialized before calling iommu_init_table() to make sure that we do not leave any IOMMU table with iommu_table_ops uninitialized. This is not a parameter of iommu_init_table() though as there will be cases when iommu_init_table() will not be called on TCE tables, for example - VFIO. This does s/tce_build/set/, s/tce_free/clear/ and removes "tce_" redundant prefixes. This removes tce_xxx_rm handlers from ppc_md but does not add them to iommu_table_ops as this will be done later if we decide to support TCE hypercalls in real mode. This removes _vm callbacks as only virtual mode is supported by now so this also removes @rm parameter. For pSeries, this always uses tce_buildmulti_pSeriesLP/ tce_buildmulti_pSeriesLP. This changes multi callback to fall back to tce_build_pSeriesLP/tce_free_pSeriesLP if FW_FEATURE_MULTITCE is not present. The reason for this is we still have to support "multitce=off" boot parameter in disable_multitce() and we do not want to walk through all IOMMU tables in the system and replace "multi" callbacks with single ones. For powernv, this defines _ops per PHB type which are P5IOC2/IODA1/IODA2. This makes the callbacks for them public. Later patches will extend callbacks for IODA1/2. No change in behaviour is expected. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:06 +08:00
/* tbl->it_ops->clear() does not support any value but 0 */
if (tce_value)
return -EINVAL;
if (ioba & ~IOMMU_PAGE_MASK(tbl))
return -EINVAL;
ioba >>= tbl->it_page_shift;
if (ioba < tbl->it_offset)
return -EINVAL;
if ((ioba + npages) > (tbl->it_offset + tbl->it_size))
return -EINVAL;
return 0;
}
EXPORT_SYMBOL_GPL(iommu_tce_clear_param_check);
int iommu_tce_put_param_check(struct iommu_table *tbl,
unsigned long ioba, unsigned long tce)
{
powerpc/iommu/powernv: Release replaced TCE At the moment writing new TCE value to the IOMMU table fails with EBUSY if there is a valid entry already. However PAPR specification allows the guest to write new TCE value without clearing it first. Another problem this patch is addressing is the use of pool locks for external IOMMU users such as VFIO. The pool locks are to protect DMA page allocator rather than entries and since the host kernel does not control what pages are in use, there is no point in pool locks and exchange()+put_page(oldtce) is sufficient to avoid possible races. This adds an exchange() callback to iommu_table_ops which does the same thing as set() plus it returns replaced TCE and DMA direction so the caller can release the pages afterwards. The exchange() receives a physical address unlike set() which receives linear mapping address; and returns a physical address as the clear() does. This implements exchange() for P5IOC2/IODA/IODA2. This adds a requirement for a platform to have exchange() implemented in order to support VFIO. This replaces iommu_tce_build() and iommu_clear_tce() with a single iommu_tce_xchg(). This makes sure that TCE permission bits are not set in TCE passed to IOMMU API as those are to be calculated by platform code from DMA direction. This moves SetPageDirty() to the IOMMU code to make it work for both VFIO ioctl interface in in-kernel TCE acceleration (when it becomes available later). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:15 +08:00
if (tce & ~IOMMU_PAGE_MASK(tbl))
return -EINVAL;
if (ioba & ~IOMMU_PAGE_MASK(tbl))
return -EINVAL;
ioba >>= tbl->it_page_shift;
if (ioba < tbl->it_offset)
return -EINVAL;
if ((ioba + 1) > (tbl->it_offset + tbl->it_size))
return -EINVAL;
return 0;
}
EXPORT_SYMBOL_GPL(iommu_tce_put_param_check);
powerpc/iommu/powernv: Release replaced TCE At the moment writing new TCE value to the IOMMU table fails with EBUSY if there is a valid entry already. However PAPR specification allows the guest to write new TCE value without clearing it first. Another problem this patch is addressing is the use of pool locks for external IOMMU users such as VFIO. The pool locks are to protect DMA page allocator rather than entries and since the host kernel does not control what pages are in use, there is no point in pool locks and exchange()+put_page(oldtce) is sufficient to avoid possible races. This adds an exchange() callback to iommu_table_ops which does the same thing as set() plus it returns replaced TCE and DMA direction so the caller can release the pages afterwards. The exchange() receives a physical address unlike set() which receives linear mapping address; and returns a physical address as the clear() does. This implements exchange() for P5IOC2/IODA/IODA2. This adds a requirement for a platform to have exchange() implemented in order to support VFIO. This replaces iommu_tce_build() and iommu_clear_tce() with a single iommu_tce_xchg(). This makes sure that TCE permission bits are not set in TCE passed to IOMMU API as those are to be calculated by platform code from DMA direction. This moves SetPageDirty() to the IOMMU code to make it work for both VFIO ioctl interface in in-kernel TCE acceleration (when it becomes available later). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:15 +08:00
long iommu_tce_xchg(struct iommu_table *tbl, unsigned long entry,
unsigned long *hpa, enum dma_data_direction *direction)
{
powerpc/iommu/powernv: Release replaced TCE At the moment writing new TCE value to the IOMMU table fails with EBUSY if there is a valid entry already. However PAPR specification allows the guest to write new TCE value without clearing it first. Another problem this patch is addressing is the use of pool locks for external IOMMU users such as VFIO. The pool locks are to protect DMA page allocator rather than entries and since the host kernel does not control what pages are in use, there is no point in pool locks and exchange()+put_page(oldtce) is sufficient to avoid possible races. This adds an exchange() callback to iommu_table_ops which does the same thing as set() plus it returns replaced TCE and DMA direction so the caller can release the pages afterwards. The exchange() receives a physical address unlike set() which receives linear mapping address; and returns a physical address as the clear() does. This implements exchange() for P5IOC2/IODA/IODA2. This adds a requirement for a platform to have exchange() implemented in order to support VFIO. This replaces iommu_tce_build() and iommu_clear_tce() with a single iommu_tce_xchg(). This makes sure that TCE permission bits are not set in TCE passed to IOMMU API as those are to be calculated by platform code from DMA direction. This moves SetPageDirty() to the IOMMU code to make it work for both VFIO ioctl interface in in-kernel TCE acceleration (when it becomes available later). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:15 +08:00
long ret;
powerpc/iommu/powernv: Release replaced TCE At the moment writing new TCE value to the IOMMU table fails with EBUSY if there is a valid entry already. However PAPR specification allows the guest to write new TCE value without clearing it first. Another problem this patch is addressing is the use of pool locks for external IOMMU users such as VFIO. The pool locks are to protect DMA page allocator rather than entries and since the host kernel does not control what pages are in use, there is no point in pool locks and exchange()+put_page(oldtce) is sufficient to avoid possible races. This adds an exchange() callback to iommu_table_ops which does the same thing as set() plus it returns replaced TCE and DMA direction so the caller can release the pages afterwards. The exchange() receives a physical address unlike set() which receives linear mapping address; and returns a physical address as the clear() does. This implements exchange() for P5IOC2/IODA/IODA2. This adds a requirement for a platform to have exchange() implemented in order to support VFIO. This replaces iommu_tce_build() and iommu_clear_tce() with a single iommu_tce_xchg(). This makes sure that TCE permission bits are not set in TCE passed to IOMMU API as those are to be calculated by platform code from DMA direction. This moves SetPageDirty() to the IOMMU code to make it work for both VFIO ioctl interface in in-kernel TCE acceleration (when it becomes available later). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:15 +08:00
ret = tbl->it_ops->exchange(tbl, entry, hpa, direction);
powerpc/iommu/powernv: Release replaced TCE At the moment writing new TCE value to the IOMMU table fails with EBUSY if there is a valid entry already. However PAPR specification allows the guest to write new TCE value without clearing it first. Another problem this patch is addressing is the use of pool locks for external IOMMU users such as VFIO. The pool locks are to protect DMA page allocator rather than entries and since the host kernel does not control what pages are in use, there is no point in pool locks and exchange()+put_page(oldtce) is sufficient to avoid possible races. This adds an exchange() callback to iommu_table_ops which does the same thing as set() plus it returns replaced TCE and DMA direction so the caller can release the pages afterwards. The exchange() receives a physical address unlike set() which receives linear mapping address; and returns a physical address as the clear() does. This implements exchange() for P5IOC2/IODA/IODA2. This adds a requirement for a platform to have exchange() implemented in order to support VFIO. This replaces iommu_tce_build() and iommu_clear_tce() with a single iommu_tce_xchg(). This makes sure that TCE permission bits are not set in TCE passed to IOMMU API as those are to be calculated by platform code from DMA direction. This moves SetPageDirty() to the IOMMU code to make it work for both VFIO ioctl interface in in-kernel TCE acceleration (when it becomes available later). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:15 +08:00
if (!ret && ((*direction == DMA_FROM_DEVICE) ||
(*direction == DMA_BIDIRECTIONAL)))
SetPageDirty(pfn_to_page(*hpa >> PAGE_SHIFT));
/* if (unlikely(ret))
pr_err("iommu_tce: %s failed on hwaddr=%lx ioba=%lx kva=%lx ret=%d\n",
__func__, hwaddr, entry << tbl->it_page_shift,
hwaddr, ret); */
return ret;
}
powerpc/iommu/powernv: Release replaced TCE At the moment writing new TCE value to the IOMMU table fails with EBUSY if there is a valid entry already. However PAPR specification allows the guest to write new TCE value without clearing it first. Another problem this patch is addressing is the use of pool locks for external IOMMU users such as VFIO. The pool locks are to protect DMA page allocator rather than entries and since the host kernel does not control what pages are in use, there is no point in pool locks and exchange()+put_page(oldtce) is sufficient to avoid possible races. This adds an exchange() callback to iommu_table_ops which does the same thing as set() plus it returns replaced TCE and DMA direction so the caller can release the pages afterwards. The exchange() receives a physical address unlike set() which receives linear mapping address; and returns a physical address as the clear() does. This implements exchange() for P5IOC2/IODA/IODA2. This adds a requirement for a platform to have exchange() implemented in order to support VFIO. This replaces iommu_tce_build() and iommu_clear_tce() with a single iommu_tce_xchg(). This makes sure that TCE permission bits are not set in TCE passed to IOMMU API as those are to be calculated by platform code from DMA direction. This moves SetPageDirty() to the IOMMU code to make it work for both VFIO ioctl interface in in-kernel TCE acceleration (when it becomes available later). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:15 +08:00
EXPORT_SYMBOL_GPL(iommu_tce_xchg);
int iommu_take_ownership(struct iommu_table *tbl)
{
unsigned long flags, i, sz = (tbl->it_size + 7) >> 3;
int ret = 0;
powerpc/iommu/powernv: Release replaced TCE At the moment writing new TCE value to the IOMMU table fails with EBUSY if there is a valid entry already. However PAPR specification allows the guest to write new TCE value without clearing it first. Another problem this patch is addressing is the use of pool locks for external IOMMU users such as VFIO. The pool locks are to protect DMA page allocator rather than entries and since the host kernel does not control what pages are in use, there is no point in pool locks and exchange()+put_page(oldtce) is sufficient to avoid possible races. This adds an exchange() callback to iommu_table_ops which does the same thing as set() plus it returns replaced TCE and DMA direction so the caller can release the pages afterwards. The exchange() receives a physical address unlike set() which receives linear mapping address; and returns a physical address as the clear() does. This implements exchange() for P5IOC2/IODA/IODA2. This adds a requirement for a platform to have exchange() implemented in order to support VFIO. This replaces iommu_tce_build() and iommu_clear_tce() with a single iommu_tce_xchg(). This makes sure that TCE permission bits are not set in TCE passed to IOMMU API as those are to be calculated by platform code from DMA direction. This moves SetPageDirty() to the IOMMU code to make it work for both VFIO ioctl interface in in-kernel TCE acceleration (when it becomes available later). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:15 +08:00
/*
* VFIO does not control TCE entries allocation and the guest
* can write new TCEs on top of existing ones so iommu_tce_build()
* must be able to release old pages. This functionality
* requires exchange() callback defined so if it is not
* implemented, we disallow taking ownership over the table.
*/
if (!tbl->it_ops->exchange)
return -EINVAL;
spin_lock_irqsave(&tbl->large_pool.lock, flags);
for (i = 0; i < tbl->nr_pools; i++)
spin_lock(&tbl->pools[i].lock);
if (tbl->it_offset == 0)
clear_bit(0, tbl->it_map);
if (!bitmap_empty(tbl->it_map, tbl->it_size)) {
pr_err("iommu_tce: it_map is not empty");
ret = -EBUSY;
/* Restore bit#0 set by iommu_init_table() */
if (tbl->it_offset == 0)
set_bit(0, tbl->it_map);
} else {
memset(tbl->it_map, 0xff, sz);
}
for (i = 0; i < tbl->nr_pools; i++)
spin_unlock(&tbl->pools[i].lock);
spin_unlock_irqrestore(&tbl->large_pool.lock, flags);
return ret;
}
EXPORT_SYMBOL_GPL(iommu_take_ownership);
void iommu_release_ownership(struct iommu_table *tbl)
{
unsigned long flags, i, sz = (tbl->it_size + 7) >> 3;
spin_lock_irqsave(&tbl->large_pool.lock, flags);
for (i = 0; i < tbl->nr_pools; i++)
spin_lock(&tbl->pools[i].lock);
memset(tbl->it_map, 0, sz);
/* Restore bit#0 set by iommu_init_table() */
if (tbl->it_offset == 0)
set_bit(0, tbl->it_map);
for (i = 0; i < tbl->nr_pools; i++)
spin_unlock(&tbl->pools[i].lock);
spin_unlock_irqrestore(&tbl->large_pool.lock, flags);
}
EXPORT_SYMBOL_GPL(iommu_release_ownership);
int iommu_add_device(struct device *dev)
{
struct iommu_table *tbl;
struct iommu_table_group_link *tgl;
powerpc/powernv: Fix IOMMU group lost When we take full hotplug to recover from EEH errors, PCI buses could be involved. For the case, the child devices of involved PCI buses can't be attached to IOMMU group properly, which is caused by commit 3f28c5a ("powerpc/powernv: Reduce multi-hit of iommu_add_device()"). When adding the PCI devices of the newly created PCI buses to the system, the IOMMU group is expected to be added in (C). (A) fails to bind the IOMMU group because bus->is_added is false. (B) fails because the device doesn't have binding IOMMU table yet. bus->is_added is set to true at end of (C) and pdev->is_added is set to true at (D). pcibios_add_pci_devices() pci_scan_bridge() pci_scan_child_bus() pci_scan_slot() pci_scan_single_device() pci_scan_device() pci_device_add() pcibios_add_device() A: Ignore device_add() B: Ignore pcibios_fixup_bus() pcibios_setup_bus_devices() pcibios_setup_device() C: Hit pcibios_finish_adding_to_bus() pci_bus_add_devices() pci_bus_add_device() D: Add device If the parent PCI bus isn't involved in hotplug, the IOMMU group is expected to be bound in (B). (A) should fail as the sysfs entries aren't populated. The patch fixes the issue by reverting commit 3f28c5a and remove WARN_ON() in iommu_add_device() to allow calling the function even the specified device already has associated IOMMU group. Cc: <stable@vger.kernel.org> # 3.16+ Reported-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-06 15:10:16 +08:00
/*
* The sysfs entries should be populated before
* binding IOMMU group. If sysfs entries isn't
* ready, we simply bail.
*/
if (!device_is_registered(dev))
return -ENOENT;
if (dev->iommu_group) {
pr_debug("%s: Skipping device %s with iommu group %d\n",
__func__, dev_name(dev),
iommu_group_id(dev->iommu_group));
return -EBUSY;
}
tbl = get_iommu_table_base(dev);
if (!tbl) {
powerpc/powernv: Fix IOMMU group lost When we take full hotplug to recover from EEH errors, PCI buses could be involved. For the case, the child devices of involved PCI buses can't be attached to IOMMU group properly, which is caused by commit 3f28c5a ("powerpc/powernv: Reduce multi-hit of iommu_add_device()"). When adding the PCI devices of the newly created PCI buses to the system, the IOMMU group is expected to be added in (C). (A) fails to bind the IOMMU group because bus->is_added is false. (B) fails because the device doesn't have binding IOMMU table yet. bus->is_added is set to true at end of (C) and pdev->is_added is set to true at (D). pcibios_add_pci_devices() pci_scan_bridge() pci_scan_child_bus() pci_scan_slot() pci_scan_single_device() pci_scan_device() pci_device_add() pcibios_add_device() A: Ignore device_add() B: Ignore pcibios_fixup_bus() pcibios_setup_bus_devices() pcibios_setup_device() C: Hit pcibios_finish_adding_to_bus() pci_bus_add_devices() pci_bus_add_device() D: Add device If the parent PCI bus isn't involved in hotplug, the IOMMU group is expected to be bound in (B). (A) should fail as the sysfs entries aren't populated. The patch fixes the issue by reverting commit 3f28c5a and remove WARN_ON() in iommu_add_device() to allow calling the function even the specified device already has associated IOMMU group. Cc: <stable@vger.kernel.org> # 3.16+ Reported-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-06 15:10:16 +08:00
pr_debug("%s: Skipping device %s with no tbl\n",
__func__, dev_name(dev));
return 0;
}
tgl = list_first_entry_or_null(&tbl->it_group_list,
struct iommu_table_group_link, next);
if (!tgl) {
pr_debug("%s: Skipping device %s with no group\n",
__func__, dev_name(dev));
return 0;
}
powerpc/powernv: Fix IOMMU group lost When we take full hotplug to recover from EEH errors, PCI buses could be involved. For the case, the child devices of involved PCI buses can't be attached to IOMMU group properly, which is caused by commit 3f28c5a ("powerpc/powernv: Reduce multi-hit of iommu_add_device()"). When adding the PCI devices of the newly created PCI buses to the system, the IOMMU group is expected to be added in (C). (A) fails to bind the IOMMU group because bus->is_added is false. (B) fails because the device doesn't have binding IOMMU table yet. bus->is_added is set to true at end of (C) and pdev->is_added is set to true at (D). pcibios_add_pci_devices() pci_scan_bridge() pci_scan_child_bus() pci_scan_slot() pci_scan_single_device() pci_scan_device() pci_device_add() pcibios_add_device() A: Ignore device_add() B: Ignore pcibios_fixup_bus() pcibios_setup_bus_devices() pcibios_setup_device() C: Hit pcibios_finish_adding_to_bus() pci_bus_add_devices() pci_bus_add_device() D: Add device If the parent PCI bus isn't involved in hotplug, the IOMMU group is expected to be bound in (B). (A) should fail as the sysfs entries aren't populated. The patch fixes the issue by reverting commit 3f28c5a and remove WARN_ON() in iommu_add_device() to allow calling the function even the specified device already has associated IOMMU group. Cc: <stable@vger.kernel.org> # 3.16+ Reported-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-06 15:10:16 +08:00
pr_debug("%s: Adding %s to iommu group %d\n",
__func__, dev_name(dev),
iommu_group_id(tgl->table_group->group));
if (PAGE_SIZE < IOMMU_PAGE_SIZE(tbl)) {
powerpc/powernv: Fix IOMMU group lost When we take full hotplug to recover from EEH errors, PCI buses could be involved. For the case, the child devices of involved PCI buses can't be attached to IOMMU group properly, which is caused by commit 3f28c5a ("powerpc/powernv: Reduce multi-hit of iommu_add_device()"). When adding the PCI devices of the newly created PCI buses to the system, the IOMMU group is expected to be added in (C). (A) fails to bind the IOMMU group because bus->is_added is false. (B) fails because the device doesn't have binding IOMMU table yet. bus->is_added is set to true at end of (C) and pdev->is_added is set to true at (D). pcibios_add_pci_devices() pci_scan_bridge() pci_scan_child_bus() pci_scan_slot() pci_scan_single_device() pci_scan_device() pci_device_add() pcibios_add_device() A: Ignore device_add() B: Ignore pcibios_fixup_bus() pcibios_setup_bus_devices() pcibios_setup_device() C: Hit pcibios_finish_adding_to_bus() pci_bus_add_devices() pci_bus_add_device() D: Add device If the parent PCI bus isn't involved in hotplug, the IOMMU group is expected to be bound in (B). (A) should fail as the sysfs entries aren't populated. The patch fixes the issue by reverting commit 3f28c5a and remove WARN_ON() in iommu_add_device() to allow calling the function even the specified device already has associated IOMMU group. Cc: <stable@vger.kernel.org> # 3.16+ Reported-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Acked-by: Wei Yang <weiyang@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-08-06 15:10:16 +08:00
pr_err("%s: Invalid IOMMU page size %lx (%lx) on %s\n",
__func__, IOMMU_PAGE_SIZE(tbl),
PAGE_SIZE, dev_name(dev));
return -EINVAL;
}
return iommu_group_add_device(tgl->table_group->group, dev);
}
EXPORT_SYMBOL_GPL(iommu_add_device);
void iommu_del_device(struct device *dev)
{
/*
* Some devices might not have IOMMU table and group
* and we needn't detach them from the associated
* IOMMU groups
*/
if (!dev->iommu_group) {
pr_debug("iommu_tce: skipping device %s with no tbl\n",
dev_name(dev));
return;
}
iommu_group_remove_device(dev);
}
EXPORT_SYMBOL_GPL(iommu_del_device);
static int tce_iommu_bus_notifier(struct notifier_block *nb,
unsigned long action, void *data)
{
struct device *dev = data;
switch (action) {
case BUS_NOTIFY_ADD_DEVICE:
return iommu_add_device(dev);
case BUS_NOTIFY_DEL_DEVICE:
if (dev->iommu_group)
iommu_del_device(dev);
return 0;
default:
return 0;
}
}
static struct notifier_block tce_iommu_bus_nb = {
.notifier_call = tce_iommu_bus_notifier,
};
int __init tce_iommu_bus_notifier_init(void)
{
bus_register_notifier(&pci_bus_type, &tce_iommu_bus_nb);
return 0;
}
#endif /* CONFIG_IOMMU_API */