hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
linux-sg2042/arch/powerpc/kernel/cpu_setup_ppc970.S

211 lines
4.1 KiB
ArmAsm
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* This file contains low level CPU setup functions.
* Copyright (C) 2003 Benjamin Herrenschmidt (benh@kernel.crashing.org)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
*/
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/cputable.h>
#include <asm/ppc_asm.h>
kbuild: m68k,parisc,ppc,ppc64,s390,xtensa use generic asm-offsets.h support Delete obsoleted parts form arch makefiles and rename to asm-offsets.h Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-09-10 02:57:26 +08:00
#include <asm/asm-offsets.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <asm/cache.h>
[POWERPC] Cleanup CPU inits Cleanup CPU inits a bit more, Geoff Levand already did some earlier. * Move CPU state save to cpu_setup, since cpu_setup is only ever done on cpu 0 on 64-bit and save is never done more than once. * Rename __restore_cpu_setup to __restore_cpu_ppc970 and add function pointers to the cputable to use instead. Powermac always has 970 so no need to check there. * Rename __970_cpu_preinit to __cpu_preinit_ppc970 and check PVR before calling it instead of in it, it's too early to use cputable. * Rename pSeries_secondary_smp_init to generic_secondary_smp_init since everyone but powermac and iSeries use it. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-11 13:07:08 +08:00
_GLOBAL(__cpu_preinit_ppc970)
/* Do nothing if not running in HV mode */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
mfmsr r0
rldicl. r0,r0,4,63
beqlr
/* Make sure HID4:rm_ci is off before MMU is turned off, that large
* pages are enabled with HID4:61 and clear HID5:DCBZ_size and
* HID5:DCBZ32_ill
*/
li r0,0
mfspr r3,SPRN_HID4
rldimi r3,r0,40,23 /* clear bit 23 (rm_ci) */
rldimi r3,r0,2,61 /* clear bit 61 (lg_pg_en) */
sync
mtspr SPRN_HID4,r3
isync
sync
mfspr r3,SPRN_HID5
rldimi r3,r0,6,56 /* clear bits 56 & 57 (DCBZ*) */
sync
mtspr SPRN_HID5,r3
isync
sync
/* Setup some basic HID1 features */
mfspr r0,SPRN_HID1
li r3,0x1200 /* enable i-fetch cacheability */
sldi r3,r3,44 /* and prefetch */
or r0,r0,r3
mtspr SPRN_HID1,r0
mtspr SPRN_HID1,r0
isync
/* Clear HIOR */
li r0,0
sync
mtspr SPRN_HIOR,0 /* Clear interrupt prefix */
isync
blr
/* Definitions for the table use to save CPU states */
#define CS_HID0 0
#define CS_HID1 8
#define CS_HID4 16
#define CS_HID5 24
#define CS_SIZE 32
.data
.balign L1_CACHE_BYTES,0
[PATCH] powerpc: Move various ppc64 files with no ppc32 equivalent to powerpc This patch moves a bunch of files from arch/ppc64 and include/asm-ppc64 which have no equivalents in ppc32 code into arch/powerpc and include/asm-powerpc. The file affected are: abs_addr.h compat.h lppaca.h paca.h tce.h cpu_setup_power4.S ioctl32.c firmware.c pacaData.c The only changes apart from the move and corresponding Makefile changes are: - #ifndef/#define in includes updated to _ASM_POWERPC_ form - trailing whitespace removed - comments giving full paths removed - pacaData.c renamed paca.c to remove studlyCaps - Misplaced { moved in lppaca.h Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64), built for 32-bit powermac (ARCH=powerpc). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-09 10:38:01 +08:00
cpu_state_storage:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
.space CS_SIZE
.balign L1_CACHE_BYTES,0
.text
[PATCH] powerpc: Move various ppc64 files with no ppc32 equivalent to powerpc This patch moves a bunch of files from arch/ppc64 and include/asm-ppc64 which have no equivalents in ppc32 code into arch/powerpc and include/asm-powerpc. The file affected are: abs_addr.h compat.h lppaca.h paca.h tce.h cpu_setup_power4.S ioctl32.c firmware.c pacaData.c The only changes apart from the move and corresponding Makefile changes are: - #ifndef/#define in includes updated to _ASM_POWERPC_ form - trailing whitespace removed - comments giving full paths removed - pacaData.c renamed paca.c to remove studlyCaps - Misplaced { moved in lppaca.h Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64), built for 32-bit powermac (ARCH=powerpc). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-09 10:38:01 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[POWERPC] Cleanup CPU inits Cleanup CPU inits a bit more, Geoff Levand already did some earlier. * Move CPU state save to cpu_setup, since cpu_setup is only ever done on cpu 0 on 64-bit and save is never done more than once. * Rename __restore_cpu_setup to __restore_cpu_ppc970 and add function pointers to the cputable to use instead. Powermac always has 970 so no need to check there. * Rename __970_cpu_preinit to __cpu_preinit_ppc970 and check PVR before calling it instead of in it, it's too early to use cputable. * Rename pSeries_secondary_smp_init to generic_secondary_smp_init since everyone but powermac and iSeries use it. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-11 13:07:08 +08:00
_GLOBAL(__setup_cpu_ppc970)
/* Do nothing if not running in HV mode */
[POWERPC] Don't access HID registers if running on a Hypervisor. The following patch avoids accessing Hypervisor privilege HID registers when running on a Hypervisor (MSR[HV]=0). Signed-off-by: Jimi Xenidis <jimix@watson.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-22 07:15:55 +08:00
mfmsr r0
rldicl. r0,r0,4,63
powerpc, KVM: Split HVMODE_206 cpu feature bit into separate HV and architecture bits This replaces the single CPU_FTR_HVMODE_206 bit with two bits, one to indicate that we have a usable hypervisor mode, and another to indicate that the processor conforms to PowerISA version 2.06. We also add another bit to indicate that the processor conforms to ISA version 2.01 and set that for PPC970 and derivatives. Some PPC970 chips (specifically those in Apple machines) have a hypervisor mode in that MSR[HV] is always 1, but the hypervisor mode is not useful in the sense that there is no way to run any code in supervisor mode (HV=0 PR=0). On these processors, the LPES0 and LPES1 bits in HID4 are always 0, and we use that as a way of detecting that hypervisor mode is not useful. Where we have a feature section in assembly code around code that only applies on POWER7 in hypervisor mode, we use a construct like END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) The definition of END_FTR_SECTION_IFSET is such that the code will be enabled (not overwritten with nops) only if all bits in the provided mask are set. Note that the CPU feature check in __tlbie() only needs to check the ARCH_206 bit, not the HVMODE bit, because __tlbie() can only get called if we are running bare-metal, i.e. in hypervisor mode. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-29 08:26:11 +08:00
beq no_hv_mode
[POWERPC] Cleanup CPU inits Cleanup CPU inits a bit more, Geoff Levand already did some earlier. * Move CPU state save to cpu_setup, since cpu_setup is only ever done on cpu 0 on 64-bit and save is never done more than once. * Rename __restore_cpu_setup to __restore_cpu_ppc970 and add function pointers to the cputable to use instead. Powermac always has 970 so no need to check there. * Rename __970_cpu_preinit to __cpu_preinit_ppc970 and check PVR before calling it instead of in it, it's too early to use cputable. * Rename pSeries_secondary_smp_init to generic_secondary_smp_init since everyone but powermac and iSeries use it. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-11 13:07:08 +08:00
mfspr r0,SPRN_HID0
li r11,5 /* clear DOZE and SLEEP */
rldimi r0,r11,52,8 /* set NAP and DPM */
Merge branch 'merge'
2006-08-25 12:56:07 +08:00
li r11,0
rldimi r0,r11,32,31 /* clear EN_ATTN */
[POWERPC] powerpc: Enable DEEPNAP power savings mode on 970MP Without this patch, on an idle system I get: cpu-power-0:21.638 cpu-power-1:27.102 cpu-power-2:29.343 cpu-power-3:25.784 Total: 103.8W With this patch: cpu-power-0:11.730 cpu-power-1:17.185 cpu-power-2:18.547 cpu-power-3:17.528 Total: 65.0W If I lower HZ to 100, I can get it as low as: cpu-power-0:10.938 cpu-power-1:16.021 cpu-power-2:17.245 cpu-power-3:16.145 Total: 60.2W Another (older) Quad G5 went from 54W to 39W at HZ=250. Coming back out of Deep Nap takes 40-70 cycles longer than coming back from just Nap (which already takes quite a while). I don't think it'll be a performance issue (interrupt latency on an idle system), but in case someone does measurements feel free to report them. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-05 12:41:41 +08:00
b load_hids /* Jump to shared code */
_GLOBAL(__setup_cpu_ppc970MP)
/* Do nothing if not running in HV mode */
mfmsr r0
rldicl. r0,r0,4,63
powerpc, KVM: Split HVMODE_206 cpu feature bit into separate HV and architecture bits This replaces the single CPU_FTR_HVMODE_206 bit with two bits, one to indicate that we have a usable hypervisor mode, and another to indicate that the processor conforms to PowerISA version 2.06. We also add another bit to indicate that the processor conforms to ISA version 2.01 and set that for PPC970 and derivatives. Some PPC970 chips (specifically those in Apple machines) have a hypervisor mode in that MSR[HV] is always 1, but the hypervisor mode is not useful in the sense that there is no way to run any code in supervisor mode (HV=0 PR=0). On these processors, the LPES0 and LPES1 bits in HID4 are always 0, and we use that as a way of detecting that hypervisor mode is not useful. Where we have a feature section in assembly code around code that only applies on POWER7 in hypervisor mode, we use a construct like END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) The definition of END_FTR_SECTION_IFSET is such that the code will be enabled (not overwritten with nops) only if all bits in the provided mask are set. Note that the CPU feature check in __tlbie() only needs to check the ARCH_206 bit, not the HVMODE bit, because __tlbie() can only get called if we are running bare-metal, i.e. in hypervisor mode. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-29 08:26:11 +08:00
beq no_hv_mode
[POWERPC] powerpc: Enable DEEPNAP power savings mode on 970MP Without this patch, on an idle system I get: cpu-power-0:21.638 cpu-power-1:27.102 cpu-power-2:29.343 cpu-power-3:25.784 Total: 103.8W With this patch: cpu-power-0:11.730 cpu-power-1:17.185 cpu-power-2:18.547 cpu-power-3:17.528 Total: 65.0W If I lower HZ to 100, I can get it as low as: cpu-power-0:10.938 cpu-power-1:16.021 cpu-power-2:17.245 cpu-power-3:16.145 Total: 60.2W Another (older) Quad G5 went from 54W to 39W at HZ=250. Coming back out of Deep Nap takes 40-70 cycles longer than coming back from just Nap (which already takes quite a while). I don't think it'll be a performance issue (interrupt latency on an idle system), but in case someone does measurements feel free to report them. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-05 12:41:41 +08:00
mfspr r0,SPRN_HID0
li r11,0x15 /* clear DOZE and SLEEP */
rldimi r0,r11,52,6 /* set DEEPNAP, NAP and DPM */
li r11,0
rldimi r0,r11,32,31 /* clear EN_ATTN */
load_hids:
[POWERPC] Cleanup CPU inits Cleanup CPU inits a bit more, Geoff Levand already did some earlier. * Move CPU state save to cpu_setup, since cpu_setup is only ever done on cpu 0 on 64-bit and save is never done more than once. * Rename __restore_cpu_setup to __restore_cpu_ppc970 and add function pointers to the cputable to use instead. Powermac always has 970 so no need to check there. * Rename __970_cpu_preinit to __cpu_preinit_ppc970 and check PVR before calling it instead of in it, it's too early to use cputable. * Rename pSeries_secondary_smp_init to generic_secondary_smp_init since everyone but powermac and iSeries use it. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-11 13:07:08 +08:00
mtspr SPRN_HID0,r0
mfspr r0,SPRN_HID0
mfspr r0,SPRN_HID0
mfspr r0,SPRN_HID0
mfspr r0,SPRN_HID0
mfspr r0,SPRN_HID0
mfspr r0,SPRN_HID0
sync
isync
powerpc, KVM: Split HVMODE_206 cpu feature bit into separate HV and architecture bits This replaces the single CPU_FTR_HVMODE_206 bit with two bits, one to indicate that we have a usable hypervisor mode, and another to indicate that the processor conforms to PowerISA version 2.06. We also add another bit to indicate that the processor conforms to ISA version 2.01 and set that for PPC970 and derivatives. Some PPC970 chips (specifically those in Apple machines) have a hypervisor mode in that MSR[HV] is always 1, but the hypervisor mode is not useful in the sense that there is no way to run any code in supervisor mode (HV=0 PR=0). On these processors, the LPES0 and LPES1 bits in HID4 are always 0, and we use that as a way of detecting that hypervisor mode is not useful. Where we have a feature section in assembly code around code that only applies on POWER7 in hypervisor mode, we use a construct like END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) The definition of END_FTR_SECTION_IFSET is such that the code will be enabled (not overwritten with nops) only if all bits in the provided mask are set. Note that the CPU feature check in __tlbie() only needs to check the ARCH_206 bit, not the HVMODE bit, because __tlbie() can only get called if we are running bare-metal, i.e. in hypervisor mode. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-29 08:26:11 +08:00
/* Try to set LPES = 01 in HID4 */
mfspr r0,SPRN_HID4
clrldi r0,r0,1 /* clear LPES0 */
ori r0,r0,HID4_LPES1 /* set LPES1 */
sync
mtspr SPRN_HID4,r0
isync
[POWERPC] Cleanup CPU inits Cleanup CPU inits a bit more, Geoff Levand already did some earlier. * Move CPU state save to cpu_setup, since cpu_setup is only ever done on cpu 0 on 64-bit and save is never done more than once. * Rename __restore_cpu_setup to __restore_cpu_ppc970 and add function pointers to the cputable to use instead. Powermac always has 970 so no need to check there. * Rename __970_cpu_preinit to __cpu_preinit_ppc970 and check PVR before calling it instead of in it, it's too early to use cputable. * Rename pSeries_secondary_smp_init to generic_secondary_smp_init since everyone but powermac and iSeries use it. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-11 13:07:08 +08:00
/* Save away cpu state */
powerpc: Use LOAD_REG_IMMEDIATE only for constants on 64-bit Using LOAD_REG_IMMEDIATE to get the address of kernel symbols generates 5 instructions where LOAD_REG_ADDR can do it in one, and will generate R_PPC64_ADDR16_* relocations in the output when we get to making the kernel as a position-independent executable, which we'd rather not have to handle. This changes various bits of assembly code to use LOAD_REG_ADDR when we need to get the address of a symbol, or to use suitable position-independent code for cases where we can't access the TOC for various reasons, or if we're not running at the address we were linked at. It also cleans up a few minor things; there's no reason to save and restore SRR0/1 around RTAS calls, __mmu_off can get the return address from LR more conveniently than the caller can supply it in R4 (and we already assume elsewhere that EA == RA if the MMU is on in early boot), and enable_64b_mode was using 5 instructions where 2 would do. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-30 09:41:12 +08:00
LOAD_REG_ADDR(r5,cpu_state_storage)
[POWERPC] Don't access HID registers if running on a Hypervisor. The following patch avoids accessing Hypervisor privilege HID registers when running on a Hypervisor (MSR[HV]=0). Signed-off-by: Jimi Xenidis <jimix@watson.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-22 07:15:55 +08:00
/* Save HID0,1,4 and 5 */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
mfspr r3,SPRN_HID0
std r3,CS_HID0(r5)
mfspr r3,SPRN_HID1
std r3,CS_HID1(r5)
powerpc, KVM: Split HVMODE_206 cpu feature bit into separate HV and architecture bits This replaces the single CPU_FTR_HVMODE_206 bit with two bits, one to indicate that we have a usable hypervisor mode, and another to indicate that the processor conforms to PowerISA version 2.06. We also add another bit to indicate that the processor conforms to ISA version 2.01 and set that for PPC970 and derivatives. Some PPC970 chips (specifically those in Apple machines) have a hypervisor mode in that MSR[HV] is always 1, but the hypervisor mode is not useful in the sense that there is no way to run any code in supervisor mode (HV=0 PR=0). On these processors, the LPES0 and LPES1 bits in HID4 are always 0, and we use that as a way of detecting that hypervisor mode is not useful. Where we have a feature section in assembly code around code that only applies on POWER7 in hypervisor mode, we use a construct like END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) The definition of END_FTR_SECTION_IFSET is such that the code will be enabled (not overwritten with nops) only if all bits in the provided mask are set. Note that the CPU feature check in __tlbie() only needs to check the ARCH_206 bit, not the HVMODE bit, because __tlbie() can only get called if we are running bare-metal, i.e. in hypervisor mode. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-29 08:26:11 +08:00
mfspr r4,SPRN_HID4
std r4,CS_HID4(r5)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
mfspr r3,SPRN_HID5
std r3,CS_HID5(r5)
[PATCH] powerpc: Move various ppc64 files with no ppc32 equivalent to powerpc This patch moves a bunch of files from arch/ppc64 and include/asm-ppc64 which have no equivalents in ppc32 code into arch/powerpc and include/asm-powerpc. The file affected are: abs_addr.h compat.h lppaca.h paca.h tce.h cpu_setup_power4.S ioctl32.c firmware.c pacaData.c The only changes apart from the move and corresponding Makefile changes are: - #ifndef/#define in includes updated to _ASM_POWERPC_ form - trailing whitespace removed - comments giving full paths removed - pacaData.c renamed paca.c to remove studlyCaps - Misplaced { moved in lppaca.h Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64), built for 32-bit powermac (ARCH=powerpc). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-09 10:38:01 +08:00
powerpc, KVM: Split HVMODE_206 cpu feature bit into separate HV and architecture bits This replaces the single CPU_FTR_HVMODE_206 bit with two bits, one to indicate that we have a usable hypervisor mode, and another to indicate that the processor conforms to PowerISA version 2.06. We also add another bit to indicate that the processor conforms to ISA version 2.01 and set that for PPC970 and derivatives. Some PPC970 chips (specifically those in Apple machines) have a hypervisor mode in that MSR[HV] is always 1, but the hypervisor mode is not useful in the sense that there is no way to run any code in supervisor mode (HV=0 PR=0). On these processors, the LPES0 and LPES1 bits in HID4 are always 0, and we use that as a way of detecting that hypervisor mode is not useful. Where we have a feature section in assembly code around code that only applies on POWER7 in hypervisor mode, we use a construct like END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) The definition of END_FTR_SECTION_IFSET is such that the code will be enabled (not overwritten with nops) only if all bits in the provided mask are set. Note that the CPU feature check in __tlbie() only needs to check the ARCH_206 bit, not the HVMODE bit, because __tlbie() can only get called if we are running bare-metal, i.e. in hypervisor mode. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-29 08:26:11 +08:00
/* See if we successfully set LPES1 to 1; if not we are in Apple mode */
andi. r4,r4,HID4_LPES1
bnelr
no_hv_mode:
/* Disable CPU_FTR_HVMODE and exit, since we don't have HV mode */
ld r5,CPU_SPEC_FEATURES(r4)
LOAD_REG_IMMEDIATE(r6,CPU_FTR_HVMODE)
andc r5,r5,r6
std r5,CPU_SPEC_FEATURES(r4)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
blr
/* Called with no MMU context (typically MSR:IR/DR off) to
* restore CPU state as backed up by the previous
* function. This does not include cache setting
*/
[POWERPC] Cleanup CPU inits Cleanup CPU inits a bit more, Geoff Levand already did some earlier. * Move CPU state save to cpu_setup, since cpu_setup is only ever done on cpu 0 on 64-bit and save is never done more than once. * Rename __restore_cpu_setup to __restore_cpu_ppc970 and add function pointers to the cputable to use instead. Powermac always has 970 so no need to check there. * Rename __970_cpu_preinit to __cpu_preinit_ppc970 and check PVR before calling it instead of in it, it's too early to use cputable. * Rename pSeries_secondary_smp_init to generic_secondary_smp_init since everyone but powermac and iSeries use it. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-11 13:07:08 +08:00
_GLOBAL(__restore_cpu_ppc970)
/* Do nothing if not running in HV mode */
[POWERPC] Don't access HID registers if running on a Hypervisor. The following patch avoids accessing Hypervisor privilege HID registers when running on a Hypervisor (MSR[HV]=0). Signed-off-by: Jimi Xenidis <jimix@watson.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-22 07:15:55 +08:00
mfmsr r0
rldicl. r0,r0,4,63
beqlr
powerpc: Use LOAD_REG_IMMEDIATE only for constants on 64-bit Using LOAD_REG_IMMEDIATE to get the address of kernel symbols generates 5 instructions where LOAD_REG_ADDR can do it in one, and will generate R_PPC64_ADDR16_* relocations in the output when we get to making the kernel as a position-independent executable, which we'd rather not have to handle. This changes various bits of assembly code to use LOAD_REG_ADDR when we need to get the address of a symbol, or to use suitable position-independent code for cases where we can't access the TOC for various reasons, or if we're not running at the address we were linked at. It also cleans up a few minor things; there's no reason to save and restore SRR0/1 around RTAS calls, __mmu_off can get the return address from LR more conveniently than the caller can supply it in R4 (and we already assume elsewhere that EA == RA if the MMU is on in early boot), and enable_64b_mode was using 5 instructions where 2 would do. Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-30 09:41:12 +08:00
LOAD_REG_ADDR(r5,cpu_state_storage)
[POWERPC] Don't access HID registers if running on a Hypervisor. The following patch avoids accessing Hypervisor privilege HID registers when running on a Hypervisor (MSR[HV]=0). Signed-off-by: Jimi Xenidis <jimix@watson.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-22 07:15:55 +08:00
/* Before accessing memory, we make sure rm_ci is clear */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
li r0,0
mfspr r3,SPRN_HID4
rldimi r3,r0,40,23 /* clear bit 23 (rm_ci) */
sync
mtspr SPRN_HID4,r3
isync
sync
/* Clear interrupt prefix */
li r0,0
sync
mtspr SPRN_HIOR,0
isync
/* Restore HID0 */
ld r3,CS_HID0(r5)
sync
isync
mtspr SPRN_HID0,r3
mfspr r3,SPRN_HID0
mfspr r3,SPRN_HID0
mfspr r3,SPRN_HID0
mfspr r3,SPRN_HID0
mfspr r3,SPRN_HID0
mfspr r3,SPRN_HID0
sync
isync
/* Restore HID1 */
ld r3,CS_HID1(r5)
sync
isync
mtspr SPRN_HID1,r3
mtspr SPRN_HID1,r3
sync
isync
[PATCH] powerpc: Move various ppc64 files with no ppc32 equivalent to powerpc This patch moves a bunch of files from arch/ppc64 and include/asm-ppc64 which have no equivalents in ppc32 code into arch/powerpc and include/asm-powerpc. The file affected are: abs_addr.h compat.h lppaca.h paca.h tce.h cpu_setup_power4.S ioctl32.c firmware.c pacaData.c The only changes apart from the move and corresponding Makefile changes are: - #ifndef/#define in includes updated to _ASM_POWERPC_ form - trailing whitespace removed - comments giving full paths removed - pacaData.c renamed paca.c to remove studlyCaps - Misplaced { moved in lppaca.h Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64), built for 32-bit powermac (ARCH=powerpc). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-09 10:38:01 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Restore HID4 */
ld r3,CS_HID4(r5)
sync
isync
mtspr SPRN_HID4,r3
sync
isync
/* Restore HID5 */
ld r3,CS_HID5(r5)
sync
isync
mtspr SPRN_HID5,r3
sync
isync
blr