linux-sg2042/arch/x86/mm/init_32.c

960 lines
26 KiB
C
Raw Normal View History

/*
*
* Copyright (C) 1995 Linus Torvalds
*
* Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999
*/
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/types.h>
#include <linux/ptrace.h>
#include <linux/mman.h>
#include <linux/mm.h>
#include <linux/hugetlb.h>
#include <linux/swap.h>
#include <linux/smp.h>
#include <linux/init.h>
#include <linux/highmem.h>
#include <linux/pagemap.h>
#include <linux/pci.h>
#include <linux/pfn.h>
#include <linux/poison.h>
#include <linux/bootmem.h>
#include <linux/memblock.h>
#include <linux/proc_fs.h>
#include <linux/memory_hotplug.h>
#include <linux/initrd.h>
#include <linux/cpumask.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/gfp.h>
#include <asm/asm.h>
#include <asm/bios_ebda.h>
#include <asm/processor.h>
#include <linux/uaccess.h>
#include <asm/pgtable.h>
#include <asm/dma.h>
#include <asm/fixmap.h>
#include <asm/e820/api.h>
#include <asm/apic.h>
#include <asm/bugs.h>
#include <asm/tlb.h>
#include <asm/tlbflush.h>
#include <asm/olpc_ofw.h>
#include <asm/pgalloc.h>
#include <asm/sections.h>
[PATCH] i386: PARAVIRT: Hooks to set up initial pagetable This patch introduces paravirt_ops hooks to control how the kernel's initial pagetable is set up. In the case of a native boot, the very early bootstrap code creates a simple non-PAE pagetable to map the kernel and physical memory. When the VM subsystem is initialized, it creates a proper pagetable which respects the PAE mode, large pages, etc. When booting under a hypervisor, there are many possibilities for what paging environment the hypervisor establishes for the guest kernel, so the constructon of the kernel's pagetable depends on the hypervisor. In the case of Xen, the hypervisor boots the kernel with a fully constructed pagetable, which is already using PAE if necessary. Also, Xen requires particular care when constructing pagetables to make sure all pagetables are always mapped read-only. In order to make this easier, kernel's initial pagetable construction has been changed to only allocate and initialize a pagetable page if there's no page already present in the pagetable. This allows the Xen paravirt backend to make a copy of the hypervisor-provided pagetable, allowing the kernel to establish any more mappings it needs while keeping the existing ones. A slightly subtle point which is worth highlighting here is that Xen requires all kernel mappings to share the same pte_t pages between all pagetables, so that updating a kernel page's mapping in one pagetable is reflected in all other pagetables. This makes it possible to allocate a page and attach it to a pagetable without having to explicitly enumerate that page's mapping in all pagetables. And: +From: "Eric W. Biederman" <ebiederm@xmission.com> If we don't set the leaf page table entries it is quite possible that will inherit and incorrect page table entry from the initial boot page table setup in head.S. So we need to redo the effort here, so we pick up PSE, PGE and the like. Hypervisors like Xen require that their page tables be read-only, which is slightly incompatible with our low identity mappings, however I discussed this with Jeremy he has modified the Xen early set_pte function to avoid problems in this area. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Andi Kleen <ak@suse.de> Acked-by: William Irwin <bill.irwin@oracle.com> Cc: Ingo Molnar <mingo@elte.hu>
2007-05-03 01:27:13 +08:00
#include <asm/paravirt.h>
#include <asm/setup.h>
#include <asm/set_memory.h>
#include <asm/page_types.h>
#include <asm/cpu_entry_area.h>
#include <asm/init.h>
#include "mm_internal.h"
unsigned long highstart_pfn, highend_pfn;
bool __read_mostly __vmalloc_start_set = false;
/*
* Creates a middle page table and puts a pointer to it in the
* given global directory entry. This only returns the gd entry
* in non-PAE compilation mode, since the middle layer is folded.
*/
static pmd_t * __init one_md_table_init(pgd_t *pgd)
{
p4d_t *p4d;
pud_t *pud;
pmd_t *pmd_table;
#ifdef CONFIG_X86_PAE
[PATCH] i386: PARAVIRT: Hooks to set up initial pagetable This patch introduces paravirt_ops hooks to control how the kernel's initial pagetable is set up. In the case of a native boot, the very early bootstrap code creates a simple non-PAE pagetable to map the kernel and physical memory. When the VM subsystem is initialized, it creates a proper pagetable which respects the PAE mode, large pages, etc. When booting under a hypervisor, there are many possibilities for what paging environment the hypervisor establishes for the guest kernel, so the constructon of the kernel's pagetable depends on the hypervisor. In the case of Xen, the hypervisor boots the kernel with a fully constructed pagetable, which is already using PAE if necessary. Also, Xen requires particular care when constructing pagetables to make sure all pagetables are always mapped read-only. In order to make this easier, kernel's initial pagetable construction has been changed to only allocate and initialize a pagetable page if there's no page already present in the pagetable. This allows the Xen paravirt backend to make a copy of the hypervisor-provided pagetable, allowing the kernel to establish any more mappings it needs while keeping the existing ones. A slightly subtle point which is worth highlighting here is that Xen requires all kernel mappings to share the same pte_t pages between all pagetables, so that updating a kernel page's mapping in one pagetable is reflected in all other pagetables. This makes it possible to allocate a page and attach it to a pagetable without having to explicitly enumerate that page's mapping in all pagetables. And: +From: "Eric W. Biederman" <ebiederm@xmission.com> If we don't set the leaf page table entries it is quite possible that will inherit and incorrect page table entry from the initial boot page table setup in head.S. So we need to redo the effort here, so we pick up PSE, PGE and the like. Hypervisors like Xen require that their page tables be read-only, which is slightly incompatible with our low identity mappings, however I discussed this with Jeremy he has modified the Xen early set_pte function to avoid problems in this area. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Andi Kleen <ak@suse.de> Acked-by: William Irwin <bill.irwin@oracle.com> Cc: Ingo Molnar <mingo@elte.hu>
2007-05-03 01:27:13 +08:00
if (!(pgd_val(*pgd) & _PAGE_PRESENT)) {
pmd_table = (pmd_t *)alloc_low_page();
paravirt_alloc_pmd(&init_mm, __pa(pmd_table) >> PAGE_SHIFT);
[PATCH] i386: PARAVIRT: Hooks to set up initial pagetable This patch introduces paravirt_ops hooks to control how the kernel's initial pagetable is set up. In the case of a native boot, the very early bootstrap code creates a simple non-PAE pagetable to map the kernel and physical memory. When the VM subsystem is initialized, it creates a proper pagetable which respects the PAE mode, large pages, etc. When booting under a hypervisor, there are many possibilities for what paging environment the hypervisor establishes for the guest kernel, so the constructon of the kernel's pagetable depends on the hypervisor. In the case of Xen, the hypervisor boots the kernel with a fully constructed pagetable, which is already using PAE if necessary. Also, Xen requires particular care when constructing pagetables to make sure all pagetables are always mapped read-only. In order to make this easier, kernel's initial pagetable construction has been changed to only allocate and initialize a pagetable page if there's no page already present in the pagetable. This allows the Xen paravirt backend to make a copy of the hypervisor-provided pagetable, allowing the kernel to establish any more mappings it needs while keeping the existing ones. A slightly subtle point which is worth highlighting here is that Xen requires all kernel mappings to share the same pte_t pages between all pagetables, so that updating a kernel page's mapping in one pagetable is reflected in all other pagetables. This makes it possible to allocate a page and attach it to a pagetable without having to explicitly enumerate that page's mapping in all pagetables. And: +From: "Eric W. Biederman" <ebiederm@xmission.com> If we don't set the leaf page table entries it is quite possible that will inherit and incorrect page table entry from the initial boot page table setup in head.S. So we need to redo the effort here, so we pick up PSE, PGE and the like. Hypervisors like Xen require that their page tables be read-only, which is slightly incompatible with our low identity mappings, however I discussed this with Jeremy he has modified the Xen early set_pte function to avoid problems in this area. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Andi Kleen <ak@suse.de> Acked-by: William Irwin <bill.irwin@oracle.com> Cc: Ingo Molnar <mingo@elte.hu>
2007-05-03 01:27:13 +08:00
set_pgd(pgd, __pgd(__pa(pmd_table) | _PAGE_PRESENT));
p4d = p4d_offset(pgd, 0);
pud = pud_offset(p4d, 0);
BUG_ON(pmd_table != pmd_offset(pud, 0));
return pmd_table;
[PATCH] i386: PARAVIRT: Hooks to set up initial pagetable This patch introduces paravirt_ops hooks to control how the kernel's initial pagetable is set up. In the case of a native boot, the very early bootstrap code creates a simple non-PAE pagetable to map the kernel and physical memory. When the VM subsystem is initialized, it creates a proper pagetable which respects the PAE mode, large pages, etc. When booting under a hypervisor, there are many possibilities for what paging environment the hypervisor establishes for the guest kernel, so the constructon of the kernel's pagetable depends on the hypervisor. In the case of Xen, the hypervisor boots the kernel with a fully constructed pagetable, which is already using PAE if necessary. Also, Xen requires particular care when constructing pagetables to make sure all pagetables are always mapped read-only. In order to make this easier, kernel's initial pagetable construction has been changed to only allocate and initialize a pagetable page if there's no page already present in the pagetable. This allows the Xen paravirt backend to make a copy of the hypervisor-provided pagetable, allowing the kernel to establish any more mappings it needs while keeping the existing ones. A slightly subtle point which is worth highlighting here is that Xen requires all kernel mappings to share the same pte_t pages between all pagetables, so that updating a kernel page's mapping in one pagetable is reflected in all other pagetables. This makes it possible to allocate a page and attach it to a pagetable without having to explicitly enumerate that page's mapping in all pagetables. And: +From: "Eric W. Biederman" <ebiederm@xmission.com> If we don't set the leaf page table entries it is quite possible that will inherit and incorrect page table entry from the initial boot page table setup in head.S. So we need to redo the effort here, so we pick up PSE, PGE and the like. Hypervisors like Xen require that their page tables be read-only, which is slightly incompatible with our low identity mappings, however I discussed this with Jeremy he has modified the Xen early set_pte function to avoid problems in this area. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Andi Kleen <ak@suse.de> Acked-by: William Irwin <bill.irwin@oracle.com> Cc: Ingo Molnar <mingo@elte.hu>
2007-05-03 01:27:13 +08:00
}
#endif
p4d = p4d_offset(pgd, 0);
pud = pud_offset(p4d, 0);
pmd_table = pmd_offset(pud, 0);
return pmd_table;
}
/*
* Create a page table and place a pointer to it in a middle page
* directory entry:
*/
static pte_t * __init one_page_table_init(pmd_t *pmd)
{
[PATCH] i386: PARAVIRT: Hooks to set up initial pagetable This patch introduces paravirt_ops hooks to control how the kernel's initial pagetable is set up. In the case of a native boot, the very early bootstrap code creates a simple non-PAE pagetable to map the kernel and physical memory. When the VM subsystem is initialized, it creates a proper pagetable which respects the PAE mode, large pages, etc. When booting under a hypervisor, there are many possibilities for what paging environment the hypervisor establishes for the guest kernel, so the constructon of the kernel's pagetable depends on the hypervisor. In the case of Xen, the hypervisor boots the kernel with a fully constructed pagetable, which is already using PAE if necessary. Also, Xen requires particular care when constructing pagetables to make sure all pagetables are always mapped read-only. In order to make this easier, kernel's initial pagetable construction has been changed to only allocate and initialize a pagetable page if there's no page already present in the pagetable. This allows the Xen paravirt backend to make a copy of the hypervisor-provided pagetable, allowing the kernel to establish any more mappings it needs while keeping the existing ones. A slightly subtle point which is worth highlighting here is that Xen requires all kernel mappings to share the same pte_t pages between all pagetables, so that updating a kernel page's mapping in one pagetable is reflected in all other pagetables. This makes it possible to allocate a page and attach it to a pagetable without having to explicitly enumerate that page's mapping in all pagetables. And: +From: "Eric W. Biederman" <ebiederm@xmission.com> If we don't set the leaf page table entries it is quite possible that will inherit and incorrect page table entry from the initial boot page table setup in head.S. So we need to redo the effort here, so we pick up PSE, PGE and the like. Hypervisors like Xen require that their page tables be read-only, which is slightly incompatible with our low identity mappings, however I discussed this with Jeremy he has modified the Xen early set_pte function to avoid problems in this area. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Andi Kleen <ak@suse.de> Acked-by: William Irwin <bill.irwin@oracle.com> Cc: Ingo Molnar <mingo@elte.hu>
2007-05-03 01:27:13 +08:00
if (!(pmd_val(*pmd) & _PAGE_PRESENT)) {
pte_t *page_table = (pte_t *)alloc_low_page();
[PATCH] i386: PARAVIRT: Hooks to set up initial pagetable This patch introduces paravirt_ops hooks to control how the kernel's initial pagetable is set up. In the case of a native boot, the very early bootstrap code creates a simple non-PAE pagetable to map the kernel and physical memory. When the VM subsystem is initialized, it creates a proper pagetable which respects the PAE mode, large pages, etc. When booting under a hypervisor, there are many possibilities for what paging environment the hypervisor establishes for the guest kernel, so the constructon of the kernel's pagetable depends on the hypervisor. In the case of Xen, the hypervisor boots the kernel with a fully constructed pagetable, which is already using PAE if necessary. Also, Xen requires particular care when constructing pagetables to make sure all pagetables are always mapped read-only. In order to make this easier, kernel's initial pagetable construction has been changed to only allocate and initialize a pagetable page if there's no page already present in the pagetable. This allows the Xen paravirt backend to make a copy of the hypervisor-provided pagetable, allowing the kernel to establish any more mappings it needs while keeping the existing ones. A slightly subtle point which is worth highlighting here is that Xen requires all kernel mappings to share the same pte_t pages between all pagetables, so that updating a kernel page's mapping in one pagetable is reflected in all other pagetables. This makes it possible to allocate a page and attach it to a pagetable without having to explicitly enumerate that page's mapping in all pagetables. And: +From: "Eric W. Biederman" <ebiederm@xmission.com> If we don't set the leaf page table entries it is quite possible that will inherit and incorrect page table entry from the initial boot page table setup in head.S. So we need to redo the effort here, so we pick up PSE, PGE and the like. Hypervisors like Xen require that their page tables be read-only, which is slightly incompatible with our low identity mappings, however I discussed this with Jeremy he has modified the Xen early set_pte function to avoid problems in this area. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Andi Kleen <ak@suse.de> Acked-by: William Irwin <bill.irwin@oracle.com> Cc: Ingo Molnar <mingo@elte.hu>
2007-05-03 01:27:13 +08:00
paravirt_alloc_pte(&init_mm, __pa(page_table) >> PAGE_SHIFT);
set_pmd(pmd, __pmd(__pa(page_table) | _PAGE_TABLE));
[PATCH] i386: PARAVIRT: Hooks to set up initial pagetable This patch introduces paravirt_ops hooks to control how the kernel's initial pagetable is set up. In the case of a native boot, the very early bootstrap code creates a simple non-PAE pagetable to map the kernel and physical memory. When the VM subsystem is initialized, it creates a proper pagetable which respects the PAE mode, large pages, etc. When booting under a hypervisor, there are many possibilities for what paging environment the hypervisor establishes for the guest kernel, so the constructon of the kernel's pagetable depends on the hypervisor. In the case of Xen, the hypervisor boots the kernel with a fully constructed pagetable, which is already using PAE if necessary. Also, Xen requires particular care when constructing pagetables to make sure all pagetables are always mapped read-only. In order to make this easier, kernel's initial pagetable construction has been changed to only allocate and initialize a pagetable page if there's no page already present in the pagetable. This allows the Xen paravirt backend to make a copy of the hypervisor-provided pagetable, allowing the kernel to establish any more mappings it needs while keeping the existing ones. A slightly subtle point which is worth highlighting here is that Xen requires all kernel mappings to share the same pte_t pages between all pagetables, so that updating a kernel page's mapping in one pagetable is reflected in all other pagetables. This makes it possible to allocate a page and attach it to a pagetable without having to explicitly enumerate that page's mapping in all pagetables. And: +From: "Eric W. Biederman" <ebiederm@xmission.com> If we don't set the leaf page table entries it is quite possible that will inherit and incorrect page table entry from the initial boot page table setup in head.S. So we need to redo the effort here, so we pick up PSE, PGE and the like. Hypervisors like Xen require that their page tables be read-only, which is slightly incompatible with our low identity mappings, however I discussed this with Jeremy he has modified the Xen early set_pte function to avoid problems in this area. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Andi Kleen <ak@suse.de> Acked-by: William Irwin <bill.irwin@oracle.com> Cc: Ingo Molnar <mingo@elte.hu>
2007-05-03 01:27:13 +08:00
BUG_ON(page_table != pte_offset_kernel(pmd, 0));
}
x86: fix CONFIG_PAGEALLOC related boot hangs/OOMs if CONFIG_PAGEALLOC is enabled then X86_FEATURE_PSE is disabled and all the kernel physical RAM pagetables are set up as 4K pages. This is needed so that CONFIG_PAGEALLOC can do finegrained mapping and unmapping of pages. as a side-effect though, the total size of memory allocated as kernel pagetables increases significantly. All these pagetables are allocated via alloc_bootmem_low_pages(), straight out of the lowmem DMA pool. If the system has enough RAM and a large kernel image then almost all of the 16 MB lowmem DMA pool is allocated to the image and to pagetables - leaving no space for __GFP_DMA allocations. this results in drivers failing and the bootup hanging: swapper invoked oom-killer: gfp_mask=0x80d1, order=0, oomkilladj=0 [<4015059f>] out_of_memory+0x17f/0x1c0 [<40151f3c>] __alloc_pages+0x37c/0x3a0 [<40168cd7>] slob_new_page+0x37/0x50 [<40168dff>] slob_alloc+0x10f/0x190 [<40169010>] __kmalloc_node+0x80/0x90 [<405a17e3>] scsi_host_alloc+0x33/0x2c0 [<405a1a82>] scsi_register+0x12/0x60 [<40d5889e>] aha1542_detect+0x9e/0x940 [<405c5ba5>] ultrastor_detect+0x265/0x5f0 [<401352f5>] getnstimeofday+0x35/0xf0 [<40d58751>] init_this_scsi_driver+0x41/0xf0 [<40d0b856>] kernel_init+0x136/0x310 [<40d58710>] init_this_scsi_driver+0x0/0xf0 [<40d0b720>] kernel_init+0x0/0x310 [<40105547>] kernel_thread_helper+0x7/0x10 ======================= the fix is to first allocate from above the DMA pool, and if that fails (for example due to it being a machine with less than 16 MB of RAM), allocate from the DMA pool as a fallback. With this fix applied i was able to boot a PAGEALLOC=y kernel that would hang before. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2007-10-18 00:04:34 +08:00
return pte_offset_kernel(pmd, 0);
}
pmd_t * __init populate_extra_pmd(unsigned long vaddr)
{
int pgd_idx = pgd_index(vaddr);
int pmd_idx = pmd_index(vaddr);
return one_md_table_init(swapper_pg_dir + pgd_idx) + pmd_idx;
}
pte_t * __init populate_extra_pte(unsigned long vaddr)
{
int pte_idx = pte_index(vaddr);
pmd_t *pmd;
pmd = populate_extra_pmd(vaddr);
return one_page_table_init(pmd) + pte_idx;
}
static unsigned long __init
page_table_range_init_count(unsigned long start, unsigned long end)
{
unsigned long count = 0;
#ifdef CONFIG_HIGHMEM
int pmd_idx_kmap_begin = fix_to_virt(FIX_KMAP_END) >> PMD_SHIFT;
int pmd_idx_kmap_end = fix_to_virt(FIX_KMAP_BEGIN) >> PMD_SHIFT;
int pgd_idx, pmd_idx;
unsigned long vaddr;
if (pmd_idx_kmap_begin == pmd_idx_kmap_end)
return 0;
vaddr = start;
pgd_idx = pgd_index(vaddr);
pmd_idx = pmd_index(vaddr);
for ( ; (pgd_idx < PTRS_PER_PGD) && (vaddr != end); pgd_idx++) {
for (; (pmd_idx < PTRS_PER_PMD) && (vaddr != end);
pmd_idx++) {
if ((vaddr >> PMD_SHIFT) >= pmd_idx_kmap_begin &&
(vaddr >> PMD_SHIFT) <= pmd_idx_kmap_end)
count++;
vaddr += PMD_SIZE;
}
pmd_idx = 0;
}
#endif
return count;
}
x86: fix assumed to be contiguous leaf page tables for kmap_atomic region (take 2) Debugging and original patch from Nick Piggin <npiggin@suse.de> The early fixmap pmd entry inserted at the very top of the KVA is causing the subsequent fixmap mapping code to not provide physically linear pte pages over the kmap atomic portion of the fixmap (which relies on said property to calculate pte addresses). This has caused weird boot failures in kmap_atomic much later in the boot process (initial userspace faults) on a 32-bit PAE system with a larger number of CPUs (smaller CPU counts tend not to run over into the next page so don't show up the problem). Solve this by attempting to clear out the page table, and copy any of its entries to the new one. Also, add a bug if a nonlinear condition is encountered and can't be resolved, which might save some hours of debugging if this fragile scheme ever breaks again... Once we have such logic, we can also use it to eliminate the early ioremap trickery around the page table setup for the fixmap area. This also fixes potential issues with FIX_* entries sharing the leaf page table with the early ioremap ones getting discarded by early_ioremap_clear() and not restored by early_ioremap_reset(). It at once eliminates the temporary (and configuration, namely NR_CPUS, dependent) unavailability of early fixed mappings during the time the fixmap area page tables get constructed. Finally, also replace the hard coded calculation of the initial table space needed for the fixmap area with a proper one, allowing kernels configured for large CPU counts to actually boot. Based-on: Nick Piggin <npiggin@suse.de> Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-16 19:59:33 +08:00
static pte_t *__init page_table_kmap_check(pte_t *pte, pmd_t *pmd,
unsigned long vaddr, pte_t *lastpte,
void **adr)
x86: fix assumed to be contiguous leaf page tables for kmap_atomic region (take 2) Debugging and original patch from Nick Piggin <npiggin@suse.de> The early fixmap pmd entry inserted at the very top of the KVA is causing the subsequent fixmap mapping code to not provide physically linear pte pages over the kmap atomic portion of the fixmap (which relies on said property to calculate pte addresses). This has caused weird boot failures in kmap_atomic much later in the boot process (initial userspace faults) on a 32-bit PAE system with a larger number of CPUs (smaller CPU counts tend not to run over into the next page so don't show up the problem). Solve this by attempting to clear out the page table, and copy any of its entries to the new one. Also, add a bug if a nonlinear condition is encountered and can't be resolved, which might save some hours of debugging if this fragile scheme ever breaks again... Once we have such logic, we can also use it to eliminate the early ioremap trickery around the page table setup for the fixmap area. This also fixes potential issues with FIX_* entries sharing the leaf page table with the early ioremap ones getting discarded by early_ioremap_clear() and not restored by early_ioremap_reset(). It at once eliminates the temporary (and configuration, namely NR_CPUS, dependent) unavailability of early fixed mappings during the time the fixmap area page tables get constructed. Finally, also replace the hard coded calculation of the initial table space needed for the fixmap area with a proper one, allowing kernels configured for large CPU counts to actually boot. Based-on: Nick Piggin <npiggin@suse.de> Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-16 19:59:33 +08:00
{
#ifdef CONFIG_HIGHMEM
/*
* Something (early fixmap) may already have put a pte
* page here, which causes the page table allocation
* to become nonlinear. Attempt to fix it, and if it
* is still nonlinear then we have to bug.
*/
int pmd_idx_kmap_begin = fix_to_virt(FIX_KMAP_END) >> PMD_SHIFT;
int pmd_idx_kmap_end = fix_to_virt(FIX_KMAP_BEGIN) >> PMD_SHIFT;
if (pmd_idx_kmap_begin != pmd_idx_kmap_end
&& (vaddr >> PMD_SHIFT) >= pmd_idx_kmap_begin
&& (vaddr >> PMD_SHIFT) <= pmd_idx_kmap_end) {
x86: fix assumed to be contiguous leaf page tables for kmap_atomic region (take 2) Debugging and original patch from Nick Piggin <npiggin@suse.de> The early fixmap pmd entry inserted at the very top of the KVA is causing the subsequent fixmap mapping code to not provide physically linear pte pages over the kmap atomic portion of the fixmap (which relies on said property to calculate pte addresses). This has caused weird boot failures in kmap_atomic much later in the boot process (initial userspace faults) on a 32-bit PAE system with a larger number of CPUs (smaller CPU counts tend not to run over into the next page so don't show up the problem). Solve this by attempting to clear out the page table, and copy any of its entries to the new one. Also, add a bug if a nonlinear condition is encountered and can't be resolved, which might save some hours of debugging if this fragile scheme ever breaks again... Once we have such logic, we can also use it to eliminate the early ioremap trickery around the page table setup for the fixmap area. This also fixes potential issues with FIX_* entries sharing the leaf page table with the early ioremap ones getting discarded by early_ioremap_clear() and not restored by early_ioremap_reset(). It at once eliminates the temporary (and configuration, namely NR_CPUS, dependent) unavailability of early fixed mappings during the time the fixmap area page tables get constructed. Finally, also replace the hard coded calculation of the initial table space needed for the fixmap area with a proper one, allowing kernels configured for large CPU counts to actually boot. Based-on: Nick Piggin <npiggin@suse.de> Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-16 19:59:33 +08:00
pte_t *newpte;
int i;
BUG_ON(after_bootmem);
newpte = *adr;
x86: fix assumed to be contiguous leaf page tables for kmap_atomic region (take 2) Debugging and original patch from Nick Piggin <npiggin@suse.de> The early fixmap pmd entry inserted at the very top of the KVA is causing the subsequent fixmap mapping code to not provide physically linear pte pages over the kmap atomic portion of the fixmap (which relies on said property to calculate pte addresses). This has caused weird boot failures in kmap_atomic much later in the boot process (initial userspace faults) on a 32-bit PAE system with a larger number of CPUs (smaller CPU counts tend not to run over into the next page so don't show up the problem). Solve this by attempting to clear out the page table, and copy any of its entries to the new one. Also, add a bug if a nonlinear condition is encountered and can't be resolved, which might save some hours of debugging if this fragile scheme ever breaks again... Once we have such logic, we can also use it to eliminate the early ioremap trickery around the page table setup for the fixmap area. This also fixes potential issues with FIX_* entries sharing the leaf page table with the early ioremap ones getting discarded by early_ioremap_clear() and not restored by early_ioremap_reset(). It at once eliminates the temporary (and configuration, namely NR_CPUS, dependent) unavailability of early fixed mappings during the time the fixmap area page tables get constructed. Finally, also replace the hard coded calculation of the initial table space needed for the fixmap area with a proper one, allowing kernels configured for large CPU counts to actually boot. Based-on: Nick Piggin <npiggin@suse.de> Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-16 19:59:33 +08:00
for (i = 0; i < PTRS_PER_PTE; i++)
set_pte(newpte + i, pte[i]);
*adr = (void *)(((unsigned long)(*adr)) + PAGE_SIZE);
x86: fix assumed to be contiguous leaf page tables for kmap_atomic region (take 2) Debugging and original patch from Nick Piggin <npiggin@suse.de> The early fixmap pmd entry inserted at the very top of the KVA is causing the subsequent fixmap mapping code to not provide physically linear pte pages over the kmap atomic portion of the fixmap (which relies on said property to calculate pte addresses). This has caused weird boot failures in kmap_atomic much later in the boot process (initial userspace faults) on a 32-bit PAE system with a larger number of CPUs (smaller CPU counts tend not to run over into the next page so don't show up the problem). Solve this by attempting to clear out the page table, and copy any of its entries to the new one. Also, add a bug if a nonlinear condition is encountered and can't be resolved, which might save some hours of debugging if this fragile scheme ever breaks again... Once we have such logic, we can also use it to eliminate the early ioremap trickery around the page table setup for the fixmap area. This also fixes potential issues with FIX_* entries sharing the leaf page table with the early ioremap ones getting discarded by early_ioremap_clear() and not restored by early_ioremap_reset(). It at once eliminates the temporary (and configuration, namely NR_CPUS, dependent) unavailability of early fixed mappings during the time the fixmap area page tables get constructed. Finally, also replace the hard coded calculation of the initial table space needed for the fixmap area with a proper one, allowing kernels configured for large CPU counts to actually boot. Based-on: Nick Piggin <npiggin@suse.de> Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-16 19:59:33 +08:00
paravirt_alloc_pte(&init_mm, __pa(newpte) >> PAGE_SHIFT);
set_pmd(pmd, __pmd(__pa(newpte)|_PAGE_TABLE));
BUG_ON(newpte != pte_offset_kernel(pmd, 0));
__flush_tlb_all();
paravirt_release_pte(__pa(pte) >> PAGE_SHIFT);
pte = newpte;
}
BUG_ON(vaddr < fix_to_virt(FIX_KMAP_BEGIN - 1)
&& vaddr > fix_to_virt(FIX_KMAP_END)
&& lastpte && lastpte + PTRS_PER_PTE != pte);
#endif
return pte;
}
/*
* This function initializes a certain range of kernel virtual memory
* with new bootmem page tables, everywhere page tables are missing in
* the given range.
*
* NOTE: The pagetables are allocated contiguous on the physical space
* so we can cache the place of the first one and move around without
* checking the pgd every time.
*/
static void __init
page_table_range_init(unsigned long start, unsigned long end, pgd_t *pgd_base)
{
int pgd_idx, pmd_idx;
unsigned long vaddr;
pgd_t *pgd;
pmd_t *pmd;
x86: fix assumed to be contiguous leaf page tables for kmap_atomic region (take 2) Debugging and original patch from Nick Piggin <npiggin@suse.de> The early fixmap pmd entry inserted at the very top of the KVA is causing the subsequent fixmap mapping code to not provide physically linear pte pages over the kmap atomic portion of the fixmap (which relies on said property to calculate pte addresses). This has caused weird boot failures in kmap_atomic much later in the boot process (initial userspace faults) on a 32-bit PAE system with a larger number of CPUs (smaller CPU counts tend not to run over into the next page so don't show up the problem). Solve this by attempting to clear out the page table, and copy any of its entries to the new one. Also, add a bug if a nonlinear condition is encountered and can't be resolved, which might save some hours of debugging if this fragile scheme ever breaks again... Once we have such logic, we can also use it to eliminate the early ioremap trickery around the page table setup for the fixmap area. This also fixes potential issues with FIX_* entries sharing the leaf page table with the early ioremap ones getting discarded by early_ioremap_clear() and not restored by early_ioremap_reset(). It at once eliminates the temporary (and configuration, namely NR_CPUS, dependent) unavailability of early fixed mappings during the time the fixmap area page tables get constructed. Finally, also replace the hard coded calculation of the initial table space needed for the fixmap area with a proper one, allowing kernels configured for large CPU counts to actually boot. Based-on: Nick Piggin <npiggin@suse.de> Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-16 19:59:33 +08:00
pte_t *pte = NULL;
unsigned long count = page_table_range_init_count(start, end);
void *adr = NULL;
if (count)
adr = alloc_low_pages(count);
vaddr = start;
pgd_idx = pgd_index(vaddr);
pmd_idx = pmd_index(vaddr);
pgd = pgd_base + pgd_idx;
for ( ; (pgd_idx < PTRS_PER_PGD) && (vaddr != end); pgd++, pgd_idx++) {
[PATCH] i386: PARAVIRT: Hooks to set up initial pagetable This patch introduces paravirt_ops hooks to control how the kernel's initial pagetable is set up. In the case of a native boot, the very early bootstrap code creates a simple non-PAE pagetable to map the kernel and physical memory. When the VM subsystem is initialized, it creates a proper pagetable which respects the PAE mode, large pages, etc. When booting under a hypervisor, there are many possibilities for what paging environment the hypervisor establishes for the guest kernel, so the constructon of the kernel's pagetable depends on the hypervisor. In the case of Xen, the hypervisor boots the kernel with a fully constructed pagetable, which is already using PAE if necessary. Also, Xen requires particular care when constructing pagetables to make sure all pagetables are always mapped read-only. In order to make this easier, kernel's initial pagetable construction has been changed to only allocate and initialize a pagetable page if there's no page already present in the pagetable. This allows the Xen paravirt backend to make a copy of the hypervisor-provided pagetable, allowing the kernel to establish any more mappings it needs while keeping the existing ones. A slightly subtle point which is worth highlighting here is that Xen requires all kernel mappings to share the same pte_t pages between all pagetables, so that updating a kernel page's mapping in one pagetable is reflected in all other pagetables. This makes it possible to allocate a page and attach it to a pagetable without having to explicitly enumerate that page's mapping in all pagetables. And: +From: "Eric W. Biederman" <ebiederm@xmission.com> If we don't set the leaf page table entries it is quite possible that will inherit and incorrect page table entry from the initial boot page table setup in head.S. So we need to redo the effort here, so we pick up PSE, PGE and the like. Hypervisors like Xen require that their page tables be read-only, which is slightly incompatible with our low identity mappings, however I discussed this with Jeremy he has modified the Xen early set_pte function to avoid problems in this area. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Andi Kleen <ak@suse.de> Acked-by: William Irwin <bill.irwin@oracle.com> Cc: Ingo Molnar <mingo@elte.hu>
2007-05-03 01:27:13 +08:00
pmd = one_md_table_init(pgd);
pmd = pmd + pmd_index(vaddr);
for (; (pmd_idx < PTRS_PER_PMD) && (vaddr != end);
pmd++, pmd_idx++) {
x86: fix assumed to be contiguous leaf page tables for kmap_atomic region (take 2) Debugging and original patch from Nick Piggin <npiggin@suse.de> The early fixmap pmd entry inserted at the very top of the KVA is causing the subsequent fixmap mapping code to not provide physically linear pte pages over the kmap atomic portion of the fixmap (which relies on said property to calculate pte addresses). This has caused weird boot failures in kmap_atomic much later in the boot process (initial userspace faults) on a 32-bit PAE system with a larger number of CPUs (smaller CPU counts tend not to run over into the next page so don't show up the problem). Solve this by attempting to clear out the page table, and copy any of its entries to the new one. Also, add a bug if a nonlinear condition is encountered and can't be resolved, which might save some hours of debugging if this fragile scheme ever breaks again... Once we have such logic, we can also use it to eliminate the early ioremap trickery around the page table setup for the fixmap area. This also fixes potential issues with FIX_* entries sharing the leaf page table with the early ioremap ones getting discarded by early_ioremap_clear() and not restored by early_ioremap_reset(). It at once eliminates the temporary (and configuration, namely NR_CPUS, dependent) unavailability of early fixed mappings during the time the fixmap area page tables get constructed. Finally, also replace the hard coded calculation of the initial table space needed for the fixmap area with a proper one, allowing kernels configured for large CPU counts to actually boot. Based-on: Nick Piggin <npiggin@suse.de> Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-16 19:59:33 +08:00
pte = page_table_kmap_check(one_page_table_init(pmd),
pmd, vaddr, pte, &adr);
vaddr += PMD_SIZE;
}
pmd_idx = 0;
}
}
static inline int is_kernel_text(unsigned long addr)
{
x86: Add NX protection for kernel data This patch expands functionality of CONFIG_DEBUG_RODATA to set main (static) kernel data area as NX. The following steps are taken to achieve this: 1. Linker script is adjusted so .text always starts and ends on a page bound 2. Linker script is adjusted so .rodata always start and end on a page boundary 3. NX is set for all pages from _etext through _end in mark_rodata_ro. 4. free_init_pages() sets released memory NX in arch/x86/mm/init.c 5. bios rom is set to x when pcibios is used. The results of patch application may be observed in the diff of kernel page table dumps: pcibios: -- data_nx_pt_before.txt 2009-10-13 07:48:59.000000000 -0400 ++ data_nx_pt_after.txt 2009-10-13 07:26:46.000000000 -0400 0x00000000-0xc0000000 3G pmd ---[ Kernel Mapping ]--- -0xc0000000-0xc0100000 1M RW GLB x pte +0xc0000000-0xc00a0000 640K RW GLB NX pte +0xc00a0000-0xc0100000 384K RW GLB x pte -0xc0100000-0xc03d7000 2908K ro GLB x pte +0xc0100000-0xc0318000 2144K ro GLB x pte +0xc0318000-0xc03d7000 764K ro GLB NX pte -0xc03d7000-0xc0600000 2212K RW GLB x pte +0xc03d7000-0xc0600000 2212K RW GLB NX pte 0xc0600000-0xf7a00000 884M RW PSE GLB NX pmd 0xf7a00000-0xf7bfe000 2040K RW GLB NX pte 0xf7bfe000-0xf7c00000 8K pte No pcibios: -- data_nx_pt_before.txt 2009-10-13 07:48:59.000000000 -0400 ++ data_nx_pt_after.txt 2009-10-13 07:26:46.000000000 -0400 0x00000000-0xc0000000 3G pmd ---[ Kernel Mapping ]--- -0xc0000000-0xc0100000 1M RW GLB x pte +0xc0000000-0xc0100000 1M RW GLB NX pte -0xc0100000-0xc03d7000 2908K ro GLB x pte +0xc0100000-0xc0318000 2144K ro GLB x pte +0xc0318000-0xc03d7000 764K ro GLB NX pte -0xc03d7000-0xc0600000 2212K RW GLB x pte +0xc03d7000-0xc0600000 2212K RW GLB NX pte 0xc0600000-0xf7a00000 884M RW PSE GLB NX pmd 0xf7a00000-0xf7bfe000 2040K RW GLB NX pte 0xf7bfe000-0xf7c00000 8K pte The patch has been originally developed for Linux 2.6.34-rc2 x86 by Siarhei Liakh <sliakh.lkml@gmail.com> and Xuxian Jiang <jiang@cs.ncsu.edu>. -v1: initial patch for 2.6.30 -v2: patch for 2.6.31-rc7 -v3: moved all code into arch/x86, adjusted credits -v4: fixed ifdef, removed credits from CREDITS -v5: fixed an address calculation bug in mark_nxdata_nx() -v6: added acked-by and PT dump diff to commit log -v7: minor adjustments for -tip -v8: rework with the merge of "Set first MB as RW+NX" Signed-off-by: Siarhei Liakh <sliakh.lkml@gmail.com> Signed-off-by: Xuxian Jiang <jiang@cs.ncsu.edu> Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Cc: Arjan van de Ven <arjan@infradead.org> Cc: James Morris <jmorris@namei.org> Cc: Andi Kleen <ak@muc.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dave Jones <davej@redhat.com> Cc: Kees Cook <kees.cook@canonical.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <4CE2F82E.60601@free.fr> [ minor cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-17 05:31:26 +08:00
if (addr >= (unsigned long)_text && addr <= (unsigned long)__init_end)
return 1;
return 0;
}
/*
* This maps the physical memory to kernel virtual address space, a total
* of max_low_pfn pages, by creating page tables starting from address
* PAGE_OFFSET:
*/
unsigned long __init
kernel_physical_mapping_init(unsigned long start,
unsigned long end,
unsigned long page_size_mask)
{
int use_pse = page_size_mask == (1<<PG_LEVEL_2M);
unsigned long last_map_addr = end;
unsigned long start_pfn, end_pfn;
pgd_t *pgd_base = swapper_pg_dir;
int pgd_idx, pmd_idx, pte_ofs;
unsigned long pfn;
pgd_t *pgd;
pmd_t *pmd;
pte_t *pte;
unsigned pages_2m, pages_4k;
int mapping_iter;
start_pfn = start >> PAGE_SHIFT;
end_pfn = end >> PAGE_SHIFT;
/*
* First iteration will setup identity mapping using large/small pages
* based on use_pse, with other attributes same as set by
* the early code in head_32.S
*
* Second iteration will setup the appropriate attributes (NX, GLOBAL..)
* as desired for the kernel identity mapping.
*
* This two pass mechanism conforms to the TLB app note which says:
*
* "Software should not write to a paging-structure entry in a way
* that would change, for any linear address, both the page size
* and either the page frame or attributes."
*/
mapping_iter = 1;
if (!boot_cpu_has(X86_FEATURE_PSE))
use_pse = 0;
repeat:
pages_2m = pages_4k = 0;
pfn = start_pfn;
pgd_idx = pgd_index((pfn<<PAGE_SHIFT) + PAGE_OFFSET);
pgd = pgd_base + pgd_idx;
for (; pgd_idx < PTRS_PER_PGD; pgd++, pgd_idx++) {
pmd = one_md_table_init(pgd);
if (pfn >= end_pfn)
continue;
#ifdef CONFIG_X86_PAE
pmd_idx = pmd_index((pfn<<PAGE_SHIFT) + PAGE_OFFSET);
pmd += pmd_idx;
#else
pmd_idx = 0;
#endif
for (; pmd_idx < PTRS_PER_PMD && pfn < end_pfn;
pmd++, pmd_idx++) {
unsigned int addr = pfn * PAGE_SIZE + PAGE_OFFSET;
/*
* Map with big pages if possible, otherwise
* create normal page tables:
*/
if (use_pse) {
unsigned int addr2;
pgprot_t prot = PAGE_KERNEL_LARGE;
/*
* first pass will use the same initial
* identity mapping attribute + _PAGE_PSE.
*/
pgprot_t init_prot =
__pgprot(PTE_IDENT_ATTR |
_PAGE_PSE);
pfn &= PMD_MASK >> PAGE_SHIFT;
addr2 = (pfn + PTRS_PER_PTE-1) * PAGE_SIZE +
PAGE_OFFSET + PAGE_SIZE-1;
if (is_kernel_text(addr) ||
is_kernel_text(addr2))
prot = PAGE_KERNEL_LARGE_EXEC;
pages_2m++;
if (mapping_iter == 1)
set_pmd(pmd, pfn_pmd(pfn, init_prot));
else
set_pmd(pmd, pfn_pmd(pfn, prot));
[PATCH] i386: PARAVIRT: Hooks to set up initial pagetable This patch introduces paravirt_ops hooks to control how the kernel's initial pagetable is set up. In the case of a native boot, the very early bootstrap code creates a simple non-PAE pagetable to map the kernel and physical memory. When the VM subsystem is initialized, it creates a proper pagetable which respects the PAE mode, large pages, etc. When booting under a hypervisor, there are many possibilities for what paging environment the hypervisor establishes for the guest kernel, so the constructon of the kernel's pagetable depends on the hypervisor. In the case of Xen, the hypervisor boots the kernel with a fully constructed pagetable, which is already using PAE if necessary. Also, Xen requires particular care when constructing pagetables to make sure all pagetables are always mapped read-only. In order to make this easier, kernel's initial pagetable construction has been changed to only allocate and initialize a pagetable page if there's no page already present in the pagetable. This allows the Xen paravirt backend to make a copy of the hypervisor-provided pagetable, allowing the kernel to establish any more mappings it needs while keeping the existing ones. A slightly subtle point which is worth highlighting here is that Xen requires all kernel mappings to share the same pte_t pages between all pagetables, so that updating a kernel page's mapping in one pagetable is reflected in all other pagetables. This makes it possible to allocate a page and attach it to a pagetable without having to explicitly enumerate that page's mapping in all pagetables. And: +From: "Eric W. Biederman" <ebiederm@xmission.com> If we don't set the leaf page table entries it is quite possible that will inherit and incorrect page table entry from the initial boot page table setup in head.S. So we need to redo the effort here, so we pick up PSE, PGE and the like. Hypervisors like Xen require that their page tables be read-only, which is slightly incompatible with our low identity mappings, however I discussed this with Jeremy he has modified the Xen early set_pte function to avoid problems in this area. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Andi Kleen <ak@suse.de> Acked-by: William Irwin <bill.irwin@oracle.com> Cc: Ingo Molnar <mingo@elte.hu>
2007-05-03 01:27:13 +08:00
pfn += PTRS_PER_PTE;
continue;
}
pte = one_page_table_init(pmd);
pte_ofs = pte_index((pfn<<PAGE_SHIFT) + PAGE_OFFSET);
pte += pte_ofs;
for (; pte_ofs < PTRS_PER_PTE && pfn < end_pfn;
pte++, pfn++, pte_ofs++, addr += PAGE_SIZE) {
pgprot_t prot = PAGE_KERNEL;
/*
* first pass will use the same initial
* identity mapping attribute.
*/
pgprot_t init_prot = __pgprot(PTE_IDENT_ATTR);
if (is_kernel_text(addr))
prot = PAGE_KERNEL_EXEC;
pages_4k++;
if (mapping_iter == 1) {
set_pte(pte, pfn_pte(pfn, init_prot));
last_map_addr = (pfn << PAGE_SHIFT) + PAGE_SIZE;
} else
set_pte(pte, pfn_pte(pfn, prot));
}
}
}
if (mapping_iter == 1) {
/*
* update direct mapping page count only in the first
* iteration.
*/
update_page_count(PG_LEVEL_2M, pages_2m);
update_page_count(PG_LEVEL_4K, pages_4k);
/*
* local global flush tlb, which will flush the previous
* mappings present in both small and large page TLB's.
*/
__flush_tlb_all();
/*
* Second iteration will set the actual desired PTE attributes.
*/
mapping_iter = 2;
goto repeat;
}
return last_map_addr;
}
pte_t *kmap_pte;
static inline pte_t *kmap_get_fixmap_pte(unsigned long vaddr)
{
pgd_t *pgd = pgd_offset_k(vaddr);
p4d_t *p4d = p4d_offset(pgd, vaddr);
pud_t *pud = pud_offset(p4d, vaddr);
pmd_t *pmd = pmd_offset(pud, vaddr);
return pte_offset_kernel(pmd, vaddr);
}
static void __init kmap_init(void)
{
unsigned long kmap_vstart;
/*
* Cache the first kmap pte:
*/
kmap_vstart = __fix_to_virt(FIX_KMAP_BEGIN);
kmap_pte = kmap_get_fixmap_pte(kmap_vstart);
}
#ifdef CONFIG_HIGHMEM
static void __init permanent_kmaps_init(pgd_t *pgd_base)
{
unsigned long vaddr;
pgd_t *pgd;
p4d_t *p4d;
pud_t *pud;
pmd_t *pmd;
pte_t *pte;
vaddr = PKMAP_BASE;
page_table_range_init(vaddr, vaddr + PAGE_SIZE*LAST_PKMAP, pgd_base);
pgd = swapper_pg_dir + pgd_index(vaddr);
p4d = p4d_offset(pgd, vaddr);
pud = pud_offset(p4d, vaddr);
pmd = pmd_offset(pud, vaddr);
pte = pte_offset_kernel(pmd, vaddr);
pkmap_page_table = pte;
}
void __init add_highpages_with_active_regions(int nid,
unsigned long start_pfn, unsigned long end_pfn)
{
phys_addr_t start, end;
u64 i;
mm/memblock: add extra "flags" to memblock to allow selection of memory based on attribute Some high end Intel Xeon systems report uncorrectable memory errors as a recoverable machine check. Linux has included code for some time to process these and just signal the affected processes (or even recover completely if the error was in a read only page that can be replaced by reading from disk). But we have no recovery path for errors encountered during kernel code execution. Except for some very specific cases were are unlikely to ever be able to recover. Enter memory mirroring. Actually 3rd generation of memory mirroing. Gen1: All memory is mirrored Pro: No s/w enabling - h/w just gets good data from other side of the mirror Con: Halves effective memory capacity available to OS/applications Gen2: Partial memory mirror - just mirror memory begind some memory controllers Pro: Keep more of the capacity Con: Nightmare to enable. Have to choose between allocating from mirrored memory for safety vs. NUMA local memory for performance Gen3: Address range partial memory mirror - some mirror on each memory controller Pro: Can tune the amount of mirror and keep NUMA performance Con: I have to write memory management code to implement The current plan is just to use mirrored memory for kernel allocations. This has been broken into two phases: 1) This patch series - find the mirrored memory, use it for boot time allocations 2) Wade into mm/page_alloc.c and define a ZONE_MIRROR to pick up the unused mirrored memory from mm/memblock.c and only give it out to select kernel allocations (this is still being scoped because page_alloc.c is scary). This patch (of 3): Add extra "flags" to memblock to allow selection of memory based on attribute. No functional changes Signed-off-by: Tony Luck <tony.luck@intel.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Xiexiuqi <xiexiuqi@huawei.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-25 07:58:09 +08:00
for_each_free_mem_range(i, nid, MEMBLOCK_NONE, &start, &end, NULL) {
unsigned long pfn = clamp_t(unsigned long, PFN_UP(start),
start_pfn, end_pfn);
unsigned long e_pfn = clamp_t(unsigned long, PFN_DOWN(end),
start_pfn, end_pfn);
for ( ; pfn < e_pfn; pfn++)
if (pfn_valid(pfn))
free_highmem_page(pfn_to_page(pfn));
}
}
#else
static inline void permanent_kmaps_init(pgd_t *pgd_base)
{
}
#endif /* CONFIG_HIGHMEM */
void __init sync_initial_page_table(void)
{
clone_pgd_range(initial_page_table + KERNEL_PGD_BOUNDARY,
swapper_pg_dir + KERNEL_PGD_BOUNDARY,
KERNEL_PGD_PTRS);
/*
* sync back low identity map too. It is used for example
* in the 32-bit EFI stub.
*/
clone_pgd_range(initial_page_table,
swapper_pg_dir + KERNEL_PGD_BOUNDARY,
min(KERNEL_PGD_PTRS, KERNEL_PGD_BOUNDARY));
}
void __init native_pagetable_init(void)
{
unsigned long pfn, va;
pgd_t *pgd, *base = swapper_pg_dir;
p4d_t *p4d;
pud_t *pud;
pmd_t *pmd;
pte_t *pte;
[PATCH] i386: PARAVIRT: Hooks to set up initial pagetable This patch introduces paravirt_ops hooks to control how the kernel's initial pagetable is set up. In the case of a native boot, the very early bootstrap code creates a simple non-PAE pagetable to map the kernel and physical memory. When the VM subsystem is initialized, it creates a proper pagetable which respects the PAE mode, large pages, etc. When booting under a hypervisor, there are many possibilities for what paging environment the hypervisor establishes for the guest kernel, so the constructon of the kernel's pagetable depends on the hypervisor. In the case of Xen, the hypervisor boots the kernel with a fully constructed pagetable, which is already using PAE if necessary. Also, Xen requires particular care when constructing pagetables to make sure all pagetables are always mapped read-only. In order to make this easier, kernel's initial pagetable construction has been changed to only allocate and initialize a pagetable page if there's no page already present in the pagetable. This allows the Xen paravirt backend to make a copy of the hypervisor-provided pagetable, allowing the kernel to establish any more mappings it needs while keeping the existing ones. A slightly subtle point which is worth highlighting here is that Xen requires all kernel mappings to share the same pte_t pages between all pagetables, so that updating a kernel page's mapping in one pagetable is reflected in all other pagetables. This makes it possible to allocate a page and attach it to a pagetable without having to explicitly enumerate that page's mapping in all pagetables. And: +From: "Eric W. Biederman" <ebiederm@xmission.com> If we don't set the leaf page table entries it is quite possible that will inherit and incorrect page table entry from the initial boot page table setup in head.S. So we need to redo the effort here, so we pick up PSE, PGE and the like. Hypervisors like Xen require that their page tables be read-only, which is slightly incompatible with our low identity mappings, however I discussed this with Jeremy he has modified the Xen early set_pte function to avoid problems in this area. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Andi Kleen <ak@suse.de> Acked-by: William Irwin <bill.irwin@oracle.com> Cc: Ingo Molnar <mingo@elte.hu>
2007-05-03 01:27:13 +08:00
/*
* Remove any mappings which extend past the end of physical
* memory from the boot time page table.
* In virtual address space, we should have at least two pages
* from VMALLOC_END to pkmap or fixmap according to VMALLOC_END
* definition. And max_low_pfn is set to VMALLOC_END physical
* address. If initial memory mapping is doing right job, we
* should have pte used near max_low_pfn or one pmd is not present.
[PATCH] i386: PARAVIRT: Hooks to set up initial pagetable This patch introduces paravirt_ops hooks to control how the kernel's initial pagetable is set up. In the case of a native boot, the very early bootstrap code creates a simple non-PAE pagetable to map the kernel and physical memory. When the VM subsystem is initialized, it creates a proper pagetable which respects the PAE mode, large pages, etc. When booting under a hypervisor, there are many possibilities for what paging environment the hypervisor establishes for the guest kernel, so the constructon of the kernel's pagetable depends on the hypervisor. In the case of Xen, the hypervisor boots the kernel with a fully constructed pagetable, which is already using PAE if necessary. Also, Xen requires particular care when constructing pagetables to make sure all pagetables are always mapped read-only. In order to make this easier, kernel's initial pagetable construction has been changed to only allocate and initialize a pagetable page if there's no page already present in the pagetable. This allows the Xen paravirt backend to make a copy of the hypervisor-provided pagetable, allowing the kernel to establish any more mappings it needs while keeping the existing ones. A slightly subtle point which is worth highlighting here is that Xen requires all kernel mappings to share the same pte_t pages between all pagetables, so that updating a kernel page's mapping in one pagetable is reflected in all other pagetables. This makes it possible to allocate a page and attach it to a pagetable without having to explicitly enumerate that page's mapping in all pagetables. And: +From: "Eric W. Biederman" <ebiederm@xmission.com> If we don't set the leaf page table entries it is quite possible that will inherit and incorrect page table entry from the initial boot page table setup in head.S. So we need to redo the effort here, so we pick up PSE, PGE and the like. Hypervisors like Xen require that their page tables be read-only, which is slightly incompatible with our low identity mappings, however I discussed this with Jeremy he has modified the Xen early set_pte function to avoid problems in this area. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Andi Kleen <ak@suse.de> Acked-by: William Irwin <bill.irwin@oracle.com> Cc: Ingo Molnar <mingo@elte.hu>
2007-05-03 01:27:13 +08:00
*/
for (pfn = max_low_pfn; pfn < 1<<(32-PAGE_SHIFT); pfn++) {
va = PAGE_OFFSET + (pfn<<PAGE_SHIFT);
pgd = base + pgd_index(va);
if (!pgd_present(*pgd))
break;
p4d = p4d_offset(pgd, va);
pud = pud_offset(p4d, va);
pmd = pmd_offset(pud, va);
if (!pmd_present(*pmd))
break;
/* should not be large page here */
if (pmd_large(*pmd)) {
pr_warn("try to clear pte for ram above max_low_pfn: pfn: %lx pmd: %p pmd phys: %lx, but pmd is big page and is not using pte !\n",
pfn, pmd, __pa(pmd));
BUG_ON(1);
}
pte = pte_offset_kernel(pmd, va);
if (!pte_present(*pte))
break;
printk(KERN_DEBUG "clearing pte for ram above max_low_pfn: pfn: %lx pmd: %p pmd phys: %lx pte: %p pte phys: %lx\n",
pfn, pmd, __pa(pmd), pte, __pa(pte));
pte_clear(NULL, va, pte);
}
paravirt_alloc_pmd(&init_mm, __pa(base) >> PAGE_SHIFT);
paging_init();
[PATCH] i386: PARAVIRT: Hooks to set up initial pagetable This patch introduces paravirt_ops hooks to control how the kernel's initial pagetable is set up. In the case of a native boot, the very early bootstrap code creates a simple non-PAE pagetable to map the kernel and physical memory. When the VM subsystem is initialized, it creates a proper pagetable which respects the PAE mode, large pages, etc. When booting under a hypervisor, there are many possibilities for what paging environment the hypervisor establishes for the guest kernel, so the constructon of the kernel's pagetable depends on the hypervisor. In the case of Xen, the hypervisor boots the kernel with a fully constructed pagetable, which is already using PAE if necessary. Also, Xen requires particular care when constructing pagetables to make sure all pagetables are always mapped read-only. In order to make this easier, kernel's initial pagetable construction has been changed to only allocate and initialize a pagetable page if there's no page already present in the pagetable. This allows the Xen paravirt backend to make a copy of the hypervisor-provided pagetable, allowing the kernel to establish any more mappings it needs while keeping the existing ones. A slightly subtle point which is worth highlighting here is that Xen requires all kernel mappings to share the same pte_t pages between all pagetables, so that updating a kernel page's mapping in one pagetable is reflected in all other pagetables. This makes it possible to allocate a page and attach it to a pagetable without having to explicitly enumerate that page's mapping in all pagetables. And: +From: "Eric W. Biederman" <ebiederm@xmission.com> If we don't set the leaf page table entries it is quite possible that will inherit and incorrect page table entry from the initial boot page table setup in head.S. So we need to redo the effort here, so we pick up PSE, PGE and the like. Hypervisors like Xen require that their page tables be read-only, which is slightly incompatible with our low identity mappings, however I discussed this with Jeremy he has modified the Xen early set_pte function to avoid problems in this area. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Andi Kleen <ak@suse.de> Acked-by: William Irwin <bill.irwin@oracle.com> Cc: Ingo Molnar <mingo@elte.hu>
2007-05-03 01:27:13 +08:00
}
/*
* Build a proper pagetable for the kernel mappings. Up until this
* point, we've been running on some set of pagetables constructed by
* the boot process.
*
* If we're booting on native hardware, this will be a pagetable
* constructed in arch/x86/kernel/head_32.S. The root of the
* pagetable will be swapper_pg_dir.
[PATCH] i386: PARAVIRT: Hooks to set up initial pagetable This patch introduces paravirt_ops hooks to control how the kernel's initial pagetable is set up. In the case of a native boot, the very early bootstrap code creates a simple non-PAE pagetable to map the kernel and physical memory. When the VM subsystem is initialized, it creates a proper pagetable which respects the PAE mode, large pages, etc. When booting under a hypervisor, there are many possibilities for what paging environment the hypervisor establishes for the guest kernel, so the constructon of the kernel's pagetable depends on the hypervisor. In the case of Xen, the hypervisor boots the kernel with a fully constructed pagetable, which is already using PAE if necessary. Also, Xen requires particular care when constructing pagetables to make sure all pagetables are always mapped read-only. In order to make this easier, kernel's initial pagetable construction has been changed to only allocate and initialize a pagetable page if there's no page already present in the pagetable. This allows the Xen paravirt backend to make a copy of the hypervisor-provided pagetable, allowing the kernel to establish any more mappings it needs while keeping the existing ones. A slightly subtle point which is worth highlighting here is that Xen requires all kernel mappings to share the same pte_t pages between all pagetables, so that updating a kernel page's mapping in one pagetable is reflected in all other pagetables. This makes it possible to allocate a page and attach it to a pagetable without having to explicitly enumerate that page's mapping in all pagetables. And: +From: "Eric W. Biederman" <ebiederm@xmission.com> If we don't set the leaf page table entries it is quite possible that will inherit and incorrect page table entry from the initial boot page table setup in head.S. So we need to redo the effort here, so we pick up PSE, PGE and the like. Hypervisors like Xen require that their page tables be read-only, which is slightly incompatible with our low identity mappings, however I discussed this with Jeremy he has modified the Xen early set_pte function to avoid problems in this area. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Andi Kleen <ak@suse.de> Acked-by: William Irwin <bill.irwin@oracle.com> Cc: Ingo Molnar <mingo@elte.hu>
2007-05-03 01:27:13 +08:00
*
* If we're booting paravirtualized under a hypervisor, then there are
* more options: we may already be running PAE, and the pagetable may
* or may not be based in swapper_pg_dir. In any case,
* paravirt_pagetable_init() will set up swapper_pg_dir
[PATCH] i386: PARAVIRT: Hooks to set up initial pagetable This patch introduces paravirt_ops hooks to control how the kernel's initial pagetable is set up. In the case of a native boot, the very early bootstrap code creates a simple non-PAE pagetable to map the kernel and physical memory. When the VM subsystem is initialized, it creates a proper pagetable which respects the PAE mode, large pages, etc. When booting under a hypervisor, there are many possibilities for what paging environment the hypervisor establishes for the guest kernel, so the constructon of the kernel's pagetable depends on the hypervisor. In the case of Xen, the hypervisor boots the kernel with a fully constructed pagetable, which is already using PAE if necessary. Also, Xen requires particular care when constructing pagetables to make sure all pagetables are always mapped read-only. In order to make this easier, kernel's initial pagetable construction has been changed to only allocate and initialize a pagetable page if there's no page already present in the pagetable. This allows the Xen paravirt backend to make a copy of the hypervisor-provided pagetable, allowing the kernel to establish any more mappings it needs while keeping the existing ones. A slightly subtle point which is worth highlighting here is that Xen requires all kernel mappings to share the same pte_t pages between all pagetables, so that updating a kernel page's mapping in one pagetable is reflected in all other pagetables. This makes it possible to allocate a page and attach it to a pagetable without having to explicitly enumerate that page's mapping in all pagetables. And: +From: "Eric W. Biederman" <ebiederm@xmission.com> If we don't set the leaf page table entries it is quite possible that will inherit and incorrect page table entry from the initial boot page table setup in head.S. So we need to redo the effort here, so we pick up PSE, PGE and the like. Hypervisors like Xen require that their page tables be read-only, which is slightly incompatible with our low identity mappings, however I discussed this with Jeremy he has modified the Xen early set_pte function to avoid problems in this area. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Andi Kleen <ak@suse.de> Acked-by: William Irwin <bill.irwin@oracle.com> Cc: Ingo Molnar <mingo@elte.hu>
2007-05-03 01:27:13 +08:00
* appropriately for the rest of the initialization to work.
*
* In general, pagetable_init() assumes that the pagetable may already
* be partially populated, and so it avoids stomping on any existing
* mappings.
*/
void __init early_ioremap_page_table_range_init(void)
[PATCH] i386: PARAVIRT: Hooks to set up initial pagetable This patch introduces paravirt_ops hooks to control how the kernel's initial pagetable is set up. In the case of a native boot, the very early bootstrap code creates a simple non-PAE pagetable to map the kernel and physical memory. When the VM subsystem is initialized, it creates a proper pagetable which respects the PAE mode, large pages, etc. When booting under a hypervisor, there are many possibilities for what paging environment the hypervisor establishes for the guest kernel, so the constructon of the kernel's pagetable depends on the hypervisor. In the case of Xen, the hypervisor boots the kernel with a fully constructed pagetable, which is already using PAE if necessary. Also, Xen requires particular care when constructing pagetables to make sure all pagetables are always mapped read-only. In order to make this easier, kernel's initial pagetable construction has been changed to only allocate and initialize a pagetable page if there's no page already present in the pagetable. This allows the Xen paravirt backend to make a copy of the hypervisor-provided pagetable, allowing the kernel to establish any more mappings it needs while keeping the existing ones. A slightly subtle point which is worth highlighting here is that Xen requires all kernel mappings to share the same pte_t pages between all pagetables, so that updating a kernel page's mapping in one pagetable is reflected in all other pagetables. This makes it possible to allocate a page and attach it to a pagetable without having to explicitly enumerate that page's mapping in all pagetables. And: +From: "Eric W. Biederman" <ebiederm@xmission.com> If we don't set the leaf page table entries it is quite possible that will inherit and incorrect page table entry from the initial boot page table setup in head.S. So we need to redo the effort here, so we pick up PSE, PGE and the like. Hypervisors like Xen require that their page tables be read-only, which is slightly incompatible with our low identity mappings, however I discussed this with Jeremy he has modified the Xen early set_pte function to avoid problems in this area. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Andi Kleen <ak@suse.de> Acked-by: William Irwin <bill.irwin@oracle.com> Cc: Ingo Molnar <mingo@elte.hu>
2007-05-03 01:27:13 +08:00
{
pgd_t *pgd_base = swapper_pg_dir;
unsigned long vaddr, end;
[PATCH] i386: PARAVIRT: Hooks to set up initial pagetable This patch introduces paravirt_ops hooks to control how the kernel's initial pagetable is set up. In the case of a native boot, the very early bootstrap code creates a simple non-PAE pagetable to map the kernel and physical memory. When the VM subsystem is initialized, it creates a proper pagetable which respects the PAE mode, large pages, etc. When booting under a hypervisor, there are many possibilities for what paging environment the hypervisor establishes for the guest kernel, so the constructon of the kernel's pagetable depends on the hypervisor. In the case of Xen, the hypervisor boots the kernel with a fully constructed pagetable, which is already using PAE if necessary. Also, Xen requires particular care when constructing pagetables to make sure all pagetables are always mapped read-only. In order to make this easier, kernel's initial pagetable construction has been changed to only allocate and initialize a pagetable page if there's no page already present in the pagetable. This allows the Xen paravirt backend to make a copy of the hypervisor-provided pagetable, allowing the kernel to establish any more mappings it needs while keeping the existing ones. A slightly subtle point which is worth highlighting here is that Xen requires all kernel mappings to share the same pte_t pages between all pagetables, so that updating a kernel page's mapping in one pagetable is reflected in all other pagetables. This makes it possible to allocate a page and attach it to a pagetable without having to explicitly enumerate that page's mapping in all pagetables. And: +From: "Eric W. Biederman" <ebiederm@xmission.com> If we don't set the leaf page table entries it is quite possible that will inherit and incorrect page table entry from the initial boot page table setup in head.S. So we need to redo the effort here, so we pick up PSE, PGE and the like. Hypervisors like Xen require that their page tables be read-only, which is slightly incompatible with our low identity mappings, however I discussed this with Jeremy he has modified the Xen early set_pte function to avoid problems in this area. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Andi Kleen <ak@suse.de> Acked-by: William Irwin <bill.irwin@oracle.com> Cc: Ingo Molnar <mingo@elte.hu>
2007-05-03 01:27:13 +08:00
/*
* Fixed mappings, only the page table structure has to be
* created - mappings will be set by set_fixmap():
*/
vaddr = __fix_to_virt(__end_of_fixed_addresses - 1) & PMD_MASK;
[PATCH] i386: PARAVIRT: Hooks to set up initial pagetable This patch introduces paravirt_ops hooks to control how the kernel's initial pagetable is set up. In the case of a native boot, the very early bootstrap code creates a simple non-PAE pagetable to map the kernel and physical memory. When the VM subsystem is initialized, it creates a proper pagetable which respects the PAE mode, large pages, etc. When booting under a hypervisor, there are many possibilities for what paging environment the hypervisor establishes for the guest kernel, so the constructon of the kernel's pagetable depends on the hypervisor. In the case of Xen, the hypervisor boots the kernel with a fully constructed pagetable, which is already using PAE if necessary. Also, Xen requires particular care when constructing pagetables to make sure all pagetables are always mapped read-only. In order to make this easier, kernel's initial pagetable construction has been changed to only allocate and initialize a pagetable page if there's no page already present in the pagetable. This allows the Xen paravirt backend to make a copy of the hypervisor-provided pagetable, allowing the kernel to establish any more mappings it needs while keeping the existing ones. A slightly subtle point which is worth highlighting here is that Xen requires all kernel mappings to share the same pte_t pages between all pagetables, so that updating a kernel page's mapping in one pagetable is reflected in all other pagetables. This makes it possible to allocate a page and attach it to a pagetable without having to explicitly enumerate that page's mapping in all pagetables. And: +From: "Eric W. Biederman" <ebiederm@xmission.com> If we don't set the leaf page table entries it is quite possible that will inherit and incorrect page table entry from the initial boot page table setup in head.S. So we need to redo the effort here, so we pick up PSE, PGE and the like. Hypervisors like Xen require that their page tables be read-only, which is slightly incompatible with our low identity mappings, however I discussed this with Jeremy he has modified the Xen early set_pte function to avoid problems in this area. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Andi Kleen <ak@suse.de> Acked-by: William Irwin <bill.irwin@oracle.com> Cc: Ingo Molnar <mingo@elte.hu>
2007-05-03 01:27:13 +08:00
end = (FIXADDR_TOP + PMD_SIZE - 1) & PMD_MASK;
page_table_range_init(vaddr, end, pgd_base);
early_ioremap_reset();
}
static void __init pagetable_init(void)
{
pgd_t *pgd_base = swapper_pg_dir;
permanent_kmaps_init(pgd_base);
}
x86/mm: Introduce "default" kernel PTE mask The __PAGE_KERNEL_* page permissions are "raw". They contain bits that may or may not be supported on the current processor. They need to be filtered by a mask (currently __supported_pte_mask) to turn them into a value that we can actually set in a PTE. These __PAGE_KERNEL_* values all contain _PAGE_GLOBAL. But, with PTI, we want to be able to support _PAGE_GLOBAL (have the bit set in __supported_pte_mask) but not have it appear in any of these masks by default. This patch creates a new mask, __default_kernel_pte_mask, and applies it when creating all of the PAGE_KERNEL_* masks. This makes PAGE_KERNEL_* safe to use anywhere (they only contain supported bits). It also ensures that PAGE_KERNEL_* contains _PAGE_GLOBAL on PTI=n kernels but clears _PAGE_GLOBAL when PTI=y. We also make __default_kernel_pte_mask a non-GPL exported symbol because there are plenty of driver-available interfaces that take PAGE_KERNEL_* permissions. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hugh Dickins <hughd@google.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kees Cook <keescook@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nadav Amit <namit@vmware.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20180406205506.030DB6B6@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-07 04:55:06 +08:00
#define DEFAULT_PTE_MASK ~(_PAGE_NX | _PAGE_GLOBAL)
/* Bits supported by the hardware: */
pteval_t __supported_pte_mask __read_mostly = DEFAULT_PTE_MASK;
/* Bits allowed in normal kernel mappings: */
pteval_t __default_kernel_pte_mask __read_mostly = DEFAULT_PTE_MASK;
EXPORT_SYMBOL_GPL(__supported_pte_mask);
x86/mm: Introduce "default" kernel PTE mask The __PAGE_KERNEL_* page permissions are "raw". They contain bits that may or may not be supported on the current processor. They need to be filtered by a mask (currently __supported_pte_mask) to turn them into a value that we can actually set in a PTE. These __PAGE_KERNEL_* values all contain _PAGE_GLOBAL. But, with PTI, we want to be able to support _PAGE_GLOBAL (have the bit set in __supported_pte_mask) but not have it appear in any of these masks by default. This patch creates a new mask, __default_kernel_pte_mask, and applies it when creating all of the PAGE_KERNEL_* masks. This makes PAGE_KERNEL_* safe to use anywhere (they only contain supported bits). It also ensures that PAGE_KERNEL_* contains _PAGE_GLOBAL on PTI=n kernels but clears _PAGE_GLOBAL when PTI=y. We also make __default_kernel_pte_mask a non-GPL exported symbol because there are plenty of driver-available interfaces that take PAGE_KERNEL_* permissions. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hugh Dickins <hughd@google.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kees Cook <keescook@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nadav Amit <namit@vmware.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20180406205506.030DB6B6@viggo.jf.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-07 04:55:06 +08:00
/* Used in PAGE_KERNEL_* macros which are reasonably used out-of-tree: */
EXPORT_SYMBOL(__default_kernel_pte_mask);
/* user-defined highmem size */
static unsigned int highmem_pages = -1;
/*
* highmem=size forces highmem to be exactly 'size' bytes.
* This works even on boxes that have no highmem otherwise.
* This also works to reduce highmem size on bigger boxes.
*/
static int __init parse_highmem(char *arg)
{
if (!arg)
return -EINVAL;
highmem_pages = memparse(arg, &arg) >> PAGE_SHIFT;
return 0;
}
early_param("highmem", parse_highmem);
#define MSG_HIGHMEM_TOO_BIG \
"highmem size (%luMB) is bigger than pages available (%luMB)!\n"
#define MSG_LOWMEM_TOO_SMALL \
"highmem size (%luMB) results in <64MB lowmem, ignoring it!\n"
/*
* All of RAM fits into lowmem - but if user wants highmem
* artificially via the highmem=x boot parameter then create
* it:
*/
static void __init lowmem_pfn_init(void)
{
/* max_low_pfn is 0, we already have early_res support */
max_low_pfn = max_pfn;
if (highmem_pages == -1)
highmem_pages = 0;
#ifdef CONFIG_HIGHMEM
if (highmem_pages >= max_pfn) {
printk(KERN_ERR MSG_HIGHMEM_TOO_BIG,
pages_to_mb(highmem_pages), pages_to_mb(max_pfn));
highmem_pages = 0;
}
if (highmem_pages) {
if (max_low_pfn - highmem_pages < 64*1024*1024/PAGE_SIZE) {
printk(KERN_ERR MSG_LOWMEM_TOO_SMALL,
pages_to_mb(highmem_pages));
highmem_pages = 0;
}
max_low_pfn -= highmem_pages;
}
#else
if (highmem_pages)
printk(KERN_ERR "ignoring highmem size on non-highmem kernel!\n");
#endif
}
#define MSG_HIGHMEM_TOO_SMALL \
"only %luMB highmem pages available, ignoring highmem size of %luMB!\n"
#define MSG_HIGHMEM_TRIMMED \
"Warning: only 4GB will be used. Use a HIGHMEM64G enabled kernel!\n"
/*
* We have more RAM than fits into lowmem - we try to put it into
* highmem, also taking the highmem=x boot parameter into account:
*/
static void __init highmem_pfn_init(void)
{
max_low_pfn = MAXMEM_PFN;
if (highmem_pages == -1)
highmem_pages = max_pfn - MAXMEM_PFN;
if (highmem_pages + MAXMEM_PFN < max_pfn)
max_pfn = MAXMEM_PFN + highmem_pages;
if (highmem_pages + MAXMEM_PFN > max_pfn) {
printk(KERN_WARNING MSG_HIGHMEM_TOO_SMALL,
pages_to_mb(max_pfn - MAXMEM_PFN),
pages_to_mb(highmem_pages));
highmem_pages = 0;
}
#ifndef CONFIG_HIGHMEM
/* Maximum memory usable is what is directly addressable */
printk(KERN_WARNING "Warning only %ldMB will be used.\n", MAXMEM>>20);
if (max_pfn > MAX_NONPAE_PFN)
printk(KERN_WARNING "Use a HIGHMEM64G enabled kernel.\n");
else
printk(KERN_WARNING "Use a HIGHMEM enabled kernel.\n");
max_pfn = MAXMEM_PFN;
#else /* !CONFIG_HIGHMEM */
#ifndef CONFIG_HIGHMEM64G
if (max_pfn > MAX_NONPAE_PFN) {
max_pfn = MAX_NONPAE_PFN;
printk(KERN_WARNING MSG_HIGHMEM_TRIMMED);
}
#endif /* !CONFIG_HIGHMEM64G */
#endif /* !CONFIG_HIGHMEM */
}
/*
* Determine low and high memory ranges:
*/
void __init find_low_pfn_range(void)
{
/* it could update max_pfn */
if (max_pfn <= MAXMEM_PFN)
lowmem_pfn_init();
else
highmem_pfn_init();
}
#ifndef CONFIG_NEED_MULTIPLE_NODES
void __init initmem_init(void)
{
#ifdef CONFIG_HIGHMEM
highstart_pfn = highend_pfn = max_pfn;
if (max_pfn > max_low_pfn)
highstart_pfn = max_low_pfn;
printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",
pages_to_mb(highend_pfn - highstart_pfn));
high_memory = (void *) __va(highstart_pfn * PAGE_SIZE - 1) + 1;
#else
high_memory = (void *) __va(max_low_pfn * PAGE_SIZE - 1) + 1;
#endif
memblock_set_node(0, PHYS_ADDR_MAX, &memblock.memory, 0);
sparse_memory_present_with_active_regions(0);
#ifdef CONFIG_FLATMEM
max_mapnr = IS_ENABLED(CONFIG_HIGHMEM) ? highend_pfn : max_low_pfn;
#endif
__vmalloc_start_set = true;
printk(KERN_NOTICE "%ldMB LOWMEM available.\n",
pages_to_mb(max_low_pfn));
setup_bootmem_allocator();
}
#endif /* !CONFIG_NEED_MULTIPLE_NODES */
void __init setup_bootmem_allocator(void)
{
printk(KERN_INFO " mapped low ram: 0 - %08lx\n",
max_pfn_mapped<<PAGE_SHIFT);
printk(KERN_INFO " low ram: 0 - %08lx\n", max_low_pfn<<PAGE_SHIFT);
}
/*
* paging_init() sets up the page tables - note that the first 8MB are
* already mapped by head.S.
*
* This routines also unmaps the page at virtual kernel address 0, so
* that we can trap those pesky NULL-reference errors in the kernel.
*/
void __init paging_init(void)
{
pagetable_init();
__flush_tlb_all();
kmap_init();
/*
* NOTE: at this point the bootmem allocator is fully available.
*/
olpc_dt_build_devicetree();
sparse_memory_present_with_active_regions(MAX_NUMNODES);
sparse_init();
zone_sizes_init();
}
/*
* Test if the WP bit works in supervisor mode. It isn't supported on 386's
* and also on some strange 486's. All 586+'s are OK. This used to involve
* black magic jumps to work around some nasty CPU bugs, but fortunately the
* switch to using exceptions got rid of all that.
*/
static void __init test_wp_bit(void)
{
char z = 0;
x86/cpu: Drop wp_works_ok member of struct cpuinfo_x86 Remove the wp_works_ok member of struct cpuinfo_x86. It's an optimization back from Linux v0.99 times where we had no fixup support yet and did the CR0.WP test via special code in the page fault handler. The < 0 test was an optimization to not do the special casing for each NULL ptr access violation but just for the first one doing the WP test. Today it serves no real purpose as the test no longer needs special code in the page fault handler and the only call side -- mem_init() -- calls it just once, anyway. However, Xen pre-initializes it to 1, to skip the test. Doing the test again for Xen should be no issue at all, as even the commit introducing skipping the test (commit d560bc61575e ("x86, xen: Suppress WP test on Xen")) mentioned it being ban aid only. And, in fact, testing the patch on Xen showed nothing breaks. The pre-fixup times are long gone and with the removal of the fallback handling code in commit a5c2a893dbd4 ("x86, 386 removal: Remove CONFIG_X86_WP_WORKS_OK") the kernel requires a working CR0.WP anyway. So just get rid of the "optimization" and do the test unconditionally. Signed-off-by: Mathias Krause <minipli@googlemail.com> Acked-by: Borislav Petkov <bp@alien8.de> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Arnd Hannemann <hannemann@nets.rwth-aachen.de> Cc: Mikael Starvik <starvik@axis.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "David S. Miller" <davem@davemloft.net> Link: http://lkml.kernel.org/r/1486933932-585-3-git-send-email-minipli@googlemail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-02-13 05:12:08 +08:00
printk(KERN_INFO "Checking if this processor honours the WP bit even in supervisor mode...");
__set_fixmap(FIX_WP_TEST, __pa_symbol(empty_zero_page), PAGE_KERNEL_RO);
if (probe_kernel_write((char *)fix_to_virt(FIX_WP_TEST), &z, 1)) {
clear_fixmap(FIX_WP_TEST);
printk(KERN_CONT "Ok.\n");
return;
}
printk(KERN_CONT "No.\n");
panic("Linux doesn't support CPUs with broken WP.");
}
void __init mem_init(void)
{
pci_iommu_alloc();
#ifdef CONFIG_FLATMEM
BUG_ON(!mem_map);
#endif
/*
* With CONFIG_DEBUG_PAGEALLOC initialization of highmem pages has to
* be done before free_all_bootmem(). Memblock use free low memory for
* temporary data (see find_range_array()) and for this purpose can use
* pages that was already passed to the buddy allocator, hence marked as
* not accessible in the page tables when compiled with
* CONFIG_DEBUG_PAGEALLOC. Otherwise order of initialization is not
* important here.
*/
set_highmem_pages_init();
/* this will put all low memory onto the freelists */
mm: concentrate modification of totalram_pages into the mm core Concentrate code to modify totalram_pages into the mm core, so the arch memory initialized code doesn't need to take care of it. With these changes applied, only following functions from mm core modify global variable totalram_pages: free_bootmem_late(), free_all_bootmem(), free_all_bootmem_node(), adjust_managed_page_count(). With this patch applied, it will be much more easier for us to keep totalram_pages and zone->managed_pages in consistence. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Acked-by: David Howells <dhowells@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: <sworddragon2@aol.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Michel Lespinasse <walken@google.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 06:03:24 +08:00
free_all_bootmem();
after_bootmem = 1;
xen, mm: allow deferred page initialization for xen pv domains Juergen Gross noticed that commit f7f99100d8d ("mm: stop zeroing memory during allocation in vmemmap") broke XEN PV domains when deferred struct page initialization is enabled. This is because the xen's PagePinned() flag is getting erased from struct pages when they are initialized later in boot. Juergen fixed this problem by disabling deferred pages on xen pv domains. It is desirable, however, to have this feature available as it reduces boot time. This fix re-enables the feature for pv-dmains, and fixes the problem the following way: The fix is to delay setting PagePinned flag until struct pages for all allocated memory are initialized, i.e. until after free_all_bootmem(). A new x86_init.hyper op init_after_bootmem() is called to let xen know that boot allocator is done, and hence struct pages for all the allocated memory are now initialized. If deferred page initialization is enabled, the rest of struct pages are going to be initialized later in boot once page_alloc_init_late() is called. xen_after_bootmem() walks page table's pages and marks them pinned. Link: http://lkml.kernel.org/r/20180226160112.24724-2-pasha.tatashin@oracle.com Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Acked-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Juergen Gross <jgross@suse.com> Tested-by: Juergen Gross <jgross@suse.com> Cc: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Pavel Tatashin <pasha.tatashin@oracle.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Andy Lutomirski <luto@kernel.org> Cc: Laura Abbott <labbott@redhat.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Mathias Krause <minipli@googlemail.com> Cc: Jinbum Park <jinb.park7@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Baoquan He <bhe@redhat.com> Cc: Jia Zhang <zhang.jia@linux.alibaba.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-11 07:36:10 +08:00
x86_init.hyper.init_after_bootmem();
mem_init_print_info(NULL);
printk(KERN_INFO "virtual kernel memory layout:\n"
" fixmap : 0x%08lx - 0x%08lx (%4ld kB)\n"
" cpu_entry : 0x%08lx - 0x%08lx (%4ld kB)\n"
#ifdef CONFIG_HIGHMEM
" pkmap : 0x%08lx - 0x%08lx (%4ld kB)\n"
#endif
" vmalloc : 0x%08lx - 0x%08lx (%4ld MB)\n"
" lowmem : 0x%08lx - 0x%08lx (%4ld MB)\n"
" .init : 0x%08lx - 0x%08lx (%4ld kB)\n"
" .data : 0x%08lx - 0x%08lx (%4ld kB)\n"
" .text : 0x%08lx - 0x%08lx (%4ld kB)\n",
FIXADDR_START, FIXADDR_TOP,
(FIXADDR_TOP - FIXADDR_START) >> 10,
CPU_ENTRY_AREA_BASE,
CPU_ENTRY_AREA_BASE + CPU_ENTRY_AREA_MAP_SIZE,
CPU_ENTRY_AREA_MAP_SIZE >> 10,
#ifdef CONFIG_HIGHMEM
PKMAP_BASE, PKMAP_BASE+LAST_PKMAP*PAGE_SIZE,
(LAST_PKMAP*PAGE_SIZE) >> 10,
#endif
VMALLOC_START, VMALLOC_END,
(VMALLOC_END - VMALLOC_START) >> 20,
(unsigned long)__va(0), (unsigned long)high_memory,
((unsigned long)high_memory - (unsigned long)__va(0)) >> 20,
(unsigned long)&__init_begin, (unsigned long)&__init_end,
((unsigned long)&__init_end -
(unsigned long)&__init_begin) >> 10,
(unsigned long)&_etext, (unsigned long)&_edata,
((unsigned long)&_edata - (unsigned long)&_etext) >> 10,
(unsigned long)&_text, (unsigned long)&_etext,
((unsigned long)&_etext - (unsigned long)&_text) >> 10);
/*
* Check boundaries twice: Some fundamental inconsistencies can
* be detected at build time already.
*/
#define __FIXADDR_TOP (-PAGE_SIZE)
#ifdef CONFIG_HIGHMEM
BUILD_BUG_ON(PKMAP_BASE + LAST_PKMAP*PAGE_SIZE > FIXADDR_START);
BUILD_BUG_ON(VMALLOC_END > PKMAP_BASE);
#endif
#define high_memory (-128UL << 20)
BUILD_BUG_ON(VMALLOC_START >= VMALLOC_END);
#undef high_memory
#undef __FIXADDR_TOP
#ifdef CONFIG_HIGHMEM
BUG_ON(PKMAP_BASE + LAST_PKMAP*PAGE_SIZE > FIXADDR_START);
BUG_ON(VMALLOC_END > PKMAP_BASE);
#endif
BUG_ON(VMALLOC_START >= VMALLOC_END);
BUG_ON((unsigned long)high_memory > VMALLOC_START);
x86/cpu: Drop wp_works_ok member of struct cpuinfo_x86 Remove the wp_works_ok member of struct cpuinfo_x86. It's an optimization back from Linux v0.99 times where we had no fixup support yet and did the CR0.WP test via special code in the page fault handler. The < 0 test was an optimization to not do the special casing for each NULL ptr access violation but just for the first one doing the WP test. Today it serves no real purpose as the test no longer needs special code in the page fault handler and the only call side -- mem_init() -- calls it just once, anyway. However, Xen pre-initializes it to 1, to skip the test. Doing the test again for Xen should be no issue at all, as even the commit introducing skipping the test (commit d560bc61575e ("x86, xen: Suppress WP test on Xen")) mentioned it being ban aid only. And, in fact, testing the patch on Xen showed nothing breaks. The pre-fixup times are long gone and with the removal of the fallback handling code in commit a5c2a893dbd4 ("x86, 386 removal: Remove CONFIG_X86_WP_WORKS_OK") the kernel requires a working CR0.WP anyway. So just get rid of the "optimization" and do the test unconditionally. Signed-off-by: Mathias Krause <minipli@googlemail.com> Acked-by: Borislav Petkov <bp@alien8.de> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Arnd Hannemann <hannemann@nets.rwth-aachen.de> Cc: Mikael Starvik <starvik@axis.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "David S. Miller" <davem@davemloft.net> Link: http://lkml.kernel.org/r/1486933932-585-3-git-send-email-minipli@googlemail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-02-13 05:12:08 +08:00
test_wp_bit();
}
#ifdef CONFIG_MEMORY_HOTPLUG
int arch_add_memory(int nid, u64 start, u64 size, struct vmem_altmap *altmap,
bool want_memblock)
{
unsigned long start_pfn = start >> PAGE_SHIFT;
unsigned long nr_pages = size >> PAGE_SHIFT;
return __add_pages(nid, start_pfn, nr_pages, altmap, want_memblock);
}
#ifdef CONFIG_MEMORY_HOTREMOVE
int arch_remove_memory(u64 start, u64 size, struct vmem_altmap *altmap)
{
unsigned long start_pfn = start >> PAGE_SHIFT;
unsigned long nr_pages = size >> PAGE_SHIFT;
struct zone *zone;
zone = page_zone(pfn_to_page(start_pfn));
return __remove_pages(zone, start_pfn, nr_pages, altmap);
}
#endif
#endif
int kernel_set_to_readonly __read_mostly;
void set_kernel_text_rw(void)
{
unsigned long start = PFN_ALIGN(_text);
unsigned long size = PFN_ALIGN(_etext) - start;
if (!kernel_set_to_readonly)
return;
pr_debug("Set kernel text: %lx - %lx for read write\n",
start, start+size);
set_pages_rw(virt_to_page(start), size >> PAGE_SHIFT);
}
void set_kernel_text_ro(void)
{
unsigned long start = PFN_ALIGN(_text);
unsigned long size = PFN_ALIGN(_etext) - start;
if (!kernel_set_to_readonly)
return;
pr_debug("Set kernel text: %lx - %lx for read only\n",
start, start+size);
set_pages_ro(virt_to_page(start), size >> PAGE_SHIFT);
}
x86: Add NX protection for kernel data This patch expands functionality of CONFIG_DEBUG_RODATA to set main (static) kernel data area as NX. The following steps are taken to achieve this: 1. Linker script is adjusted so .text always starts and ends on a page bound 2. Linker script is adjusted so .rodata always start and end on a page boundary 3. NX is set for all pages from _etext through _end in mark_rodata_ro. 4. free_init_pages() sets released memory NX in arch/x86/mm/init.c 5. bios rom is set to x when pcibios is used. The results of patch application may be observed in the diff of kernel page table dumps: pcibios: -- data_nx_pt_before.txt 2009-10-13 07:48:59.000000000 -0400 ++ data_nx_pt_after.txt 2009-10-13 07:26:46.000000000 -0400 0x00000000-0xc0000000 3G pmd ---[ Kernel Mapping ]--- -0xc0000000-0xc0100000 1M RW GLB x pte +0xc0000000-0xc00a0000 640K RW GLB NX pte +0xc00a0000-0xc0100000 384K RW GLB x pte -0xc0100000-0xc03d7000 2908K ro GLB x pte +0xc0100000-0xc0318000 2144K ro GLB x pte +0xc0318000-0xc03d7000 764K ro GLB NX pte -0xc03d7000-0xc0600000 2212K RW GLB x pte +0xc03d7000-0xc0600000 2212K RW GLB NX pte 0xc0600000-0xf7a00000 884M RW PSE GLB NX pmd 0xf7a00000-0xf7bfe000 2040K RW GLB NX pte 0xf7bfe000-0xf7c00000 8K pte No pcibios: -- data_nx_pt_before.txt 2009-10-13 07:48:59.000000000 -0400 ++ data_nx_pt_after.txt 2009-10-13 07:26:46.000000000 -0400 0x00000000-0xc0000000 3G pmd ---[ Kernel Mapping ]--- -0xc0000000-0xc0100000 1M RW GLB x pte +0xc0000000-0xc0100000 1M RW GLB NX pte -0xc0100000-0xc03d7000 2908K ro GLB x pte +0xc0100000-0xc0318000 2144K ro GLB x pte +0xc0318000-0xc03d7000 764K ro GLB NX pte -0xc03d7000-0xc0600000 2212K RW GLB x pte +0xc03d7000-0xc0600000 2212K RW GLB NX pte 0xc0600000-0xf7a00000 884M RW PSE GLB NX pmd 0xf7a00000-0xf7bfe000 2040K RW GLB NX pte 0xf7bfe000-0xf7c00000 8K pte The patch has been originally developed for Linux 2.6.34-rc2 x86 by Siarhei Liakh <sliakh.lkml@gmail.com> and Xuxian Jiang <jiang@cs.ncsu.edu>. -v1: initial patch for 2.6.30 -v2: patch for 2.6.31-rc7 -v3: moved all code into arch/x86, adjusted credits -v4: fixed ifdef, removed credits from CREDITS -v5: fixed an address calculation bug in mark_nxdata_nx() -v6: added acked-by and PT dump diff to commit log -v7: minor adjustments for -tip -v8: rework with the merge of "Set first MB as RW+NX" Signed-off-by: Siarhei Liakh <sliakh.lkml@gmail.com> Signed-off-by: Xuxian Jiang <jiang@cs.ncsu.edu> Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Cc: Arjan van de Ven <arjan@infradead.org> Cc: James Morris <jmorris@namei.org> Cc: Andi Kleen <ak@muc.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dave Jones <davej@redhat.com> Cc: Kees Cook <kees.cook@canonical.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <4CE2F82E.60601@free.fr> [ minor cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-17 05:31:26 +08:00
static void mark_nxdata_nx(void)
{
/*
* When this called, init has already been executed and released,
* so everything past _etext should be NX.
x86: Add NX protection for kernel data This patch expands functionality of CONFIG_DEBUG_RODATA to set main (static) kernel data area as NX. The following steps are taken to achieve this: 1. Linker script is adjusted so .text always starts and ends on a page bound 2. Linker script is adjusted so .rodata always start and end on a page boundary 3. NX is set for all pages from _etext through _end in mark_rodata_ro. 4. free_init_pages() sets released memory NX in arch/x86/mm/init.c 5. bios rom is set to x when pcibios is used. The results of patch application may be observed in the diff of kernel page table dumps: pcibios: -- data_nx_pt_before.txt 2009-10-13 07:48:59.000000000 -0400 ++ data_nx_pt_after.txt 2009-10-13 07:26:46.000000000 -0400 0x00000000-0xc0000000 3G pmd ---[ Kernel Mapping ]--- -0xc0000000-0xc0100000 1M RW GLB x pte +0xc0000000-0xc00a0000 640K RW GLB NX pte +0xc00a0000-0xc0100000 384K RW GLB x pte -0xc0100000-0xc03d7000 2908K ro GLB x pte +0xc0100000-0xc0318000 2144K ro GLB x pte +0xc0318000-0xc03d7000 764K ro GLB NX pte -0xc03d7000-0xc0600000 2212K RW GLB x pte +0xc03d7000-0xc0600000 2212K RW GLB NX pte 0xc0600000-0xf7a00000 884M RW PSE GLB NX pmd 0xf7a00000-0xf7bfe000 2040K RW GLB NX pte 0xf7bfe000-0xf7c00000 8K pte No pcibios: -- data_nx_pt_before.txt 2009-10-13 07:48:59.000000000 -0400 ++ data_nx_pt_after.txt 2009-10-13 07:26:46.000000000 -0400 0x00000000-0xc0000000 3G pmd ---[ Kernel Mapping ]--- -0xc0000000-0xc0100000 1M RW GLB x pte +0xc0000000-0xc0100000 1M RW GLB NX pte -0xc0100000-0xc03d7000 2908K ro GLB x pte +0xc0100000-0xc0318000 2144K ro GLB x pte +0xc0318000-0xc03d7000 764K ro GLB NX pte -0xc03d7000-0xc0600000 2212K RW GLB x pte +0xc03d7000-0xc0600000 2212K RW GLB NX pte 0xc0600000-0xf7a00000 884M RW PSE GLB NX pmd 0xf7a00000-0xf7bfe000 2040K RW GLB NX pte 0xf7bfe000-0xf7c00000 8K pte The patch has been originally developed for Linux 2.6.34-rc2 x86 by Siarhei Liakh <sliakh.lkml@gmail.com> and Xuxian Jiang <jiang@cs.ncsu.edu>. -v1: initial patch for 2.6.30 -v2: patch for 2.6.31-rc7 -v3: moved all code into arch/x86, adjusted credits -v4: fixed ifdef, removed credits from CREDITS -v5: fixed an address calculation bug in mark_nxdata_nx() -v6: added acked-by and PT dump diff to commit log -v7: minor adjustments for -tip -v8: rework with the merge of "Set first MB as RW+NX" Signed-off-by: Siarhei Liakh <sliakh.lkml@gmail.com> Signed-off-by: Xuxian Jiang <jiang@cs.ncsu.edu> Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Cc: Arjan van de Ven <arjan@infradead.org> Cc: James Morris <jmorris@namei.org> Cc: Andi Kleen <ak@muc.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dave Jones <davej@redhat.com> Cc: Kees Cook <kees.cook@canonical.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <4CE2F82E.60601@free.fr> [ minor cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-17 05:31:26 +08:00
*/
unsigned long start = PFN_ALIGN(_etext);
/*
* This comes from is_kernel_text upper limit. Also HPAGE where used:
*/
unsigned long size = (((unsigned long)__init_end + HPAGE_SIZE) & HPAGE_MASK) - start;
if (__supported_pte_mask & _PAGE_NX)
printk(KERN_INFO "NX-protecting the kernel data: %luk\n", size >> 10);
set_pages_nx(virt_to_page(start), size >> PAGE_SHIFT);
}
void mark_rodata_ro(void)
{
unsigned long start = PFN_ALIGN(_text);
unsigned long size = PFN_ALIGN(_etext) - start;
set_pages_ro(virt_to_page(start), size >> PAGE_SHIFT);
printk(KERN_INFO "Write protecting the kernel text: %luk\n",
size >> 10);
kernel_set_to_readonly = 1;
#ifdef CONFIG_CPA_DEBUG
printk(KERN_INFO "Testing CPA: Reverting %lx-%lx\n",
start, start+size);
set_pages_rw(virt_to_page(start), size>>PAGE_SHIFT);
printk(KERN_INFO "Testing CPA: write protecting again\n");
set_pages_ro(virt_to_page(start), size>>PAGE_SHIFT);
#endif
start += size;
size = (unsigned long)__end_rodata - start;
set_pages_ro(virt_to_page(start), size >> PAGE_SHIFT);
printk(KERN_INFO "Write protecting the kernel read-only data: %luk\n",
size >> 10);
#ifdef CONFIG_CPA_DEBUG
printk(KERN_INFO "Testing CPA: undo %lx-%lx\n", start, start + size);
set_pages_rw(virt_to_page(start), size >> PAGE_SHIFT);
printk(KERN_INFO "Testing CPA: write protecting again\n");
set_pages_ro(virt_to_page(start), size >> PAGE_SHIFT);
#endif
x86: Add NX protection for kernel data This patch expands functionality of CONFIG_DEBUG_RODATA to set main (static) kernel data area as NX. The following steps are taken to achieve this: 1. Linker script is adjusted so .text always starts and ends on a page bound 2. Linker script is adjusted so .rodata always start and end on a page boundary 3. NX is set for all pages from _etext through _end in mark_rodata_ro. 4. free_init_pages() sets released memory NX in arch/x86/mm/init.c 5. bios rom is set to x when pcibios is used. The results of patch application may be observed in the diff of kernel page table dumps: pcibios: -- data_nx_pt_before.txt 2009-10-13 07:48:59.000000000 -0400 ++ data_nx_pt_after.txt 2009-10-13 07:26:46.000000000 -0400 0x00000000-0xc0000000 3G pmd ---[ Kernel Mapping ]--- -0xc0000000-0xc0100000 1M RW GLB x pte +0xc0000000-0xc00a0000 640K RW GLB NX pte +0xc00a0000-0xc0100000 384K RW GLB x pte -0xc0100000-0xc03d7000 2908K ro GLB x pte +0xc0100000-0xc0318000 2144K ro GLB x pte +0xc0318000-0xc03d7000 764K ro GLB NX pte -0xc03d7000-0xc0600000 2212K RW GLB x pte +0xc03d7000-0xc0600000 2212K RW GLB NX pte 0xc0600000-0xf7a00000 884M RW PSE GLB NX pmd 0xf7a00000-0xf7bfe000 2040K RW GLB NX pte 0xf7bfe000-0xf7c00000 8K pte No pcibios: -- data_nx_pt_before.txt 2009-10-13 07:48:59.000000000 -0400 ++ data_nx_pt_after.txt 2009-10-13 07:26:46.000000000 -0400 0x00000000-0xc0000000 3G pmd ---[ Kernel Mapping ]--- -0xc0000000-0xc0100000 1M RW GLB x pte +0xc0000000-0xc0100000 1M RW GLB NX pte -0xc0100000-0xc03d7000 2908K ro GLB x pte +0xc0100000-0xc0318000 2144K ro GLB x pte +0xc0318000-0xc03d7000 764K ro GLB NX pte -0xc03d7000-0xc0600000 2212K RW GLB x pte +0xc03d7000-0xc0600000 2212K RW GLB NX pte 0xc0600000-0xf7a00000 884M RW PSE GLB NX pmd 0xf7a00000-0xf7bfe000 2040K RW GLB NX pte 0xf7bfe000-0xf7c00000 8K pte The patch has been originally developed for Linux 2.6.34-rc2 x86 by Siarhei Liakh <sliakh.lkml@gmail.com> and Xuxian Jiang <jiang@cs.ncsu.edu>. -v1: initial patch for 2.6.30 -v2: patch for 2.6.31-rc7 -v3: moved all code into arch/x86, adjusted credits -v4: fixed ifdef, removed credits from CREDITS -v5: fixed an address calculation bug in mark_nxdata_nx() -v6: added acked-by and PT dump diff to commit log -v7: minor adjustments for -tip -v8: rework with the merge of "Set first MB as RW+NX" Signed-off-by: Siarhei Liakh <sliakh.lkml@gmail.com> Signed-off-by: Xuxian Jiang <jiang@cs.ncsu.edu> Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Cc: Arjan van de Ven <arjan@infradead.org> Cc: James Morris <jmorris@namei.org> Cc: Andi Kleen <ak@muc.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dave Jones <davej@redhat.com> Cc: Kees Cook <kees.cook@canonical.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <4CE2F82E.60601@free.fr> [ minor cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-17 05:31:26 +08:00
mark_nxdata_nx();
x86/mm: Warn on W^X mappings Warn on any residual W+X mappings after setting NX if DEBUG_WX is enabled. Introduce a separate X86_PTDUMP_CORE config that enables the code for dumping the page tables without enabling the debugfs interface, so that DEBUG_WX can be enabled without exposing the debugfs interface. Switch EFI_PGT_DUMP to using X86_PTDUMP_CORE so that it also does not require enabling the debugfs interface. On success it prints this to the kernel log: x86/mm: Checked W+X mappings: passed, no W+X pages found. On failure it prints a warning and a count of the failed pages: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1 at arch/x86/mm/dump_pagetables.c:226 note_page+0x610/0x7b0() x86/mm: Found insecure W+X mapping at address ffffffff81755000/__stop___ex_table+0xfa8/0xabfa8 [...] Call Trace: [<ffffffff81380a5f>] dump_stack+0x44/0x55 [<ffffffff8109d3f2>] warn_slowpath_common+0x82/0xc0 [<ffffffff8109d48c>] warn_slowpath_fmt+0x5c/0x80 [<ffffffff8106cfc9>] ? note_page+0x5c9/0x7b0 [<ffffffff8106d010>] note_page+0x610/0x7b0 [<ffffffff8106d409>] ptdump_walk_pgd_level_core+0x259/0x3c0 [<ffffffff8106d5a7>] ptdump_walk_pgd_level_checkwx+0x17/0x20 [<ffffffff81063905>] mark_rodata_ro+0xf5/0x100 [<ffffffff817415a0>] ? rest_init+0x80/0x80 [<ffffffff817415bd>] kernel_init+0x1d/0xe0 [<ffffffff8174cd1f>] ret_from_fork+0x3f/0x70 [<ffffffff817415a0>] ? rest_init+0x80/0x80 ---[ end trace a1f23a1e42a2ac76 ]--- x86/mm: Checked W+X mappings: FAILED, 171 W+X pages found. Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Acked-by: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/1444064120-11450-1-git-send-email-sds@tycho.nsa.gov [ Improved the Kconfig help text and made the new option default-y if CONFIG_DEBUG_RODATA=y, because it already found buggy mappings, so we really want people to have this on by default. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-06 00:55:20 +08:00
if (__supported_pte_mask & _PAGE_NX)
debug_checkwx();
}