linux-sg2042/drivers/uwb/address.c

367 lines
10 KiB
C
Raw Normal View History

/*
* Ultra Wide Band
* Address management
*
* Copyright (C) 2005-2006 Intel Corporation
* Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License version
* 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
* 02110-1301, USA.
*
*
* FIXME: docs
*/
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/random.h>
#include <linux/etherdevice.h>
#include "uwb-internal.h"
/** Device Address Management command */
struct uwb_rc_cmd_dev_addr_mgmt {
struct uwb_rccb rccb;
u8 bmOperationType;
u8 baAddr[6];
} __attribute__((packed));
/**
* Low level command for setting/getting UWB radio's addresses
*
* @hwarc: HWA Radio Control interface instance
* @bmOperationType:
* Set/get, MAC/DEV (see WUSB1.0[8.6.2.2])
* @baAddr: address buffer--assumed to have enough data to hold
* the address type requested.
* @reply: Pointer to reply buffer (can be stack allocated)
* @returns: 0 if ok, < 0 errno code on error.
*
* @cmd has to be allocated because USB cannot grok USB or vmalloc
* buffers depending on your combination of host architecture.
*/
static
int uwb_rc_dev_addr_mgmt(struct uwb_rc *rc,
u8 bmOperationType, const u8 *baAddr,
struct uwb_rc_evt_dev_addr_mgmt *reply)
{
int result;
struct uwb_rc_cmd_dev_addr_mgmt *cmd;
result = -ENOMEM;
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (cmd == NULL)
goto error_kzalloc;
cmd->rccb.bCommandType = UWB_RC_CET_GENERAL;
cmd->rccb.wCommand = cpu_to_le16(UWB_RC_CMD_DEV_ADDR_MGMT);
cmd->bmOperationType = bmOperationType;
if (baAddr) {
size_t size = 0;
switch (bmOperationType >> 1) {
case 0: size = 2; break;
case 1: size = 6; break;
default: BUG();
}
memcpy(cmd->baAddr, baAddr, size);
}
reply->rceb.bEventType = UWB_RC_CET_GENERAL;
reply->rceb.wEvent = UWB_RC_CMD_DEV_ADDR_MGMT;
result = uwb_rc_cmd(rc, "DEV-ADDR-MGMT",
&cmd->rccb, sizeof(*cmd),
&reply->rceb, sizeof(*reply));
if (result < 0)
goto error_cmd;
if (result < sizeof(*reply)) {
dev_err(&rc->uwb_dev.dev,
"DEV-ADDR-MGMT: not enough data replied: "
"%d vs %zu bytes needed\n", result, sizeof(*reply));
result = -ENOMSG;
} else if (reply->bResultCode != UWB_RC_RES_SUCCESS) {
dev_err(&rc->uwb_dev.dev,
"DEV-ADDR-MGMT: command execution failed: %s (%d)\n",
uwb_rc_strerror(reply->bResultCode),
reply->bResultCode);
result = -EIO;
} else
result = 0;
error_cmd:
kfree(cmd);
error_kzalloc:
return result;
}
/**
* Set the UWB RC MAC or device address.
*
* @rc: UWB Radio Controller
* @_addr: Pointer to address to write [assumed to be either a
* 'struct uwb_mac_addr *' or a 'struct uwb_dev_addr *'].
* @type: Type of address to set (UWB_ADDR_DEV or UWB_ADDR_MAC).
* @returns: 0 if ok, < 0 errno code on error.
*
* Some anal retentivity here: even if both 'struct
* uwb_{dev,mac}_addr' have the actual byte array in the same offset
* and I could just pass _addr to hwarc_cmd_dev_addr_mgmt(), I prefer
* to use some syntatic sugar in case someday we decide to change the
* format of the structs. The compiler will optimize it out anyway.
*/
static int uwb_rc_addr_set(struct uwb_rc *rc,
const void *_addr, enum uwb_addr_type type)
{
int result;
u8 bmOperationType = 0x1; /* Set address */
const struct uwb_dev_addr *dev_addr = _addr;
const struct uwb_mac_addr *mac_addr = _addr;
struct uwb_rc_evt_dev_addr_mgmt reply;
const u8 *baAddr;
result = -EINVAL;
switch (type) {
case UWB_ADDR_DEV:
baAddr = dev_addr->data;
break;
case UWB_ADDR_MAC:
baAddr = mac_addr->data;
bmOperationType |= 0x2;
break;
default:
return result;
}
return uwb_rc_dev_addr_mgmt(rc, bmOperationType, baAddr, &reply);
}
/**
* Get the UWB radio's MAC or device address.
*
* @rc: UWB Radio Controller
* @_addr: Where to write the address data [assumed to be either a
* 'struct uwb_mac_addr *' or a 'struct uwb_dev_addr *'].
* @type: Type of address to get (UWB_ADDR_DEV or UWB_ADDR_MAC).
* @returns: 0 if ok (and *_addr set), < 0 errno code on error.
*
* See comment in uwb_rc_addr_set() about anal retentivity in the
* type handling of the address variables.
*/
static int uwb_rc_addr_get(struct uwb_rc *rc,
void *_addr, enum uwb_addr_type type)
{
int result;
u8 bmOperationType = 0x0; /* Get address */
struct uwb_rc_evt_dev_addr_mgmt evt;
struct uwb_dev_addr *dev_addr = _addr;
struct uwb_mac_addr *mac_addr = _addr;
u8 *baAddr;
result = -EINVAL;
switch (type) {
case UWB_ADDR_DEV:
baAddr = dev_addr->data;
break;
case UWB_ADDR_MAC:
bmOperationType |= 0x2;
baAddr = mac_addr->data;
break;
default:
return result;
}
result = uwb_rc_dev_addr_mgmt(rc, bmOperationType, baAddr, &evt);
if (result == 0)
switch (type) {
case UWB_ADDR_DEV:
memcpy(&dev_addr->data, evt.baAddr,
sizeof(dev_addr->data));
break;
case UWB_ADDR_MAC:
memcpy(&mac_addr->data, evt.baAddr,
sizeof(mac_addr->data));
break;
default: /* shut gcc up */
BUG();
}
return result;
}
/** Get @rc's MAC address to @addr */
int uwb_rc_mac_addr_get(struct uwb_rc *rc,
struct uwb_mac_addr *addr) {
return uwb_rc_addr_get(rc, addr, UWB_ADDR_MAC);
}
EXPORT_SYMBOL_GPL(uwb_rc_mac_addr_get);
/** Get @rc's device address to @addr */
int uwb_rc_dev_addr_get(struct uwb_rc *rc,
struct uwb_dev_addr *addr) {
return uwb_rc_addr_get(rc, addr, UWB_ADDR_DEV);
}
EXPORT_SYMBOL_GPL(uwb_rc_dev_addr_get);
/** Set @rc's address to @addr */
int uwb_rc_mac_addr_set(struct uwb_rc *rc,
const struct uwb_mac_addr *addr)
{
int result = -EINVAL;
mutex_lock(&rc->uwb_dev.mutex);
result = uwb_rc_addr_set(rc, addr, UWB_ADDR_MAC);
mutex_unlock(&rc->uwb_dev.mutex);
return result;
}
/** Set @rc's address to @addr */
int uwb_rc_dev_addr_set(struct uwb_rc *rc,
const struct uwb_dev_addr *addr)
{
int result = -EINVAL;
mutex_lock(&rc->uwb_dev.mutex);
result = uwb_rc_addr_set(rc, addr, UWB_ADDR_DEV);
rc->uwb_dev.dev_addr = *addr;
mutex_unlock(&rc->uwb_dev.mutex);
return result;
}
/* Returns !0 if given address is already assigned to device. */
int __uwb_mac_addr_assigned_check(struct device *dev, void *_addr)
{
struct uwb_dev *uwb_dev = to_uwb_dev(dev);
struct uwb_mac_addr *addr = _addr;
if (!uwb_mac_addr_cmp(addr, &uwb_dev->mac_addr))
return !0;
return 0;
}
/* Returns !0 if given address is already assigned to device. */
int __uwb_dev_addr_assigned_check(struct device *dev, void *_addr)
{
struct uwb_dev *uwb_dev = to_uwb_dev(dev);
struct uwb_dev_addr *addr = _addr;
if (!uwb_dev_addr_cmp(addr, &uwb_dev->dev_addr))
return !0;
return 0;
}
/**
* uwb_dev_addr_assign - assigned a generated DevAddr to a radio controller
* @rc: the (local) radio controller device requiring a new DevAddr
*
* A new DevAddr is required when:
* - first setting up a radio controller
* - if the hardware reports a DevAddr conflict
*
* The DevAddr is randomly generated in the generated DevAddr range
* [0x100, 0xfeff]. The number of devices in a beacon group is limited
* by mMaxBPLength (96) so this address space will never be exhausted.
*
* [ECMA-368] 17.1.1, 17.16.
*/
int uwb_rc_dev_addr_assign(struct uwb_rc *rc)
{
struct uwb_dev_addr new_addr;
do {
get_random_bytes(new_addr.data, sizeof(new_addr.data));
} while (new_addr.data[0] == 0x00 || new_addr.data[0] == 0xff
|| __uwb_dev_addr_assigned(rc, &new_addr));
return uwb_rc_dev_addr_set(rc, &new_addr);
}
/**
* uwbd_evt_handle_rc_dev_addr_conflict - handle a DEV_ADDR_CONFLICT event
* @evt: the DEV_ADDR_CONFLICT notification from the radio controller
*
* A new (non-conflicting) DevAddr is assigned to the radio controller.
*
* [ECMA-368] 17.1.1.1.
*/
int uwbd_evt_handle_rc_dev_addr_conflict(struct uwb_event *evt)
{
struct uwb_rc *rc = evt->rc;
return uwb_rc_dev_addr_assign(rc);
}
/*
* Print the 48-bit EUI MAC address of the radio controller when
* reading /sys/class/uwb_rc/XX/mac_address
*/
static ssize_t uwb_rc_mac_addr_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct uwb_dev *uwb_dev = to_uwb_dev(dev);
struct uwb_rc *rc = uwb_dev->rc;
struct uwb_mac_addr addr;
ssize_t result;
mutex_lock(&rc->uwb_dev.mutex);
result = uwb_rc_addr_get(rc, &addr, UWB_ADDR_MAC);
mutex_unlock(&rc->uwb_dev.mutex);
if (result >= 0) {
result = uwb_mac_addr_print(buf, UWB_ADDR_STRSIZE, &addr);
buf[result++] = '\n';
}
return result;
}
/*
* Parse a 48 bit address written to /sys/class/uwb_rc/XX/mac_address
* and if correct, set it.
*/
static ssize_t uwb_rc_mac_addr_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t size)
{
struct uwb_dev *uwb_dev = to_uwb_dev(dev);
struct uwb_rc *rc = uwb_dev->rc;
struct uwb_mac_addr addr;
ssize_t result;
if (!mac_pton(buf, addr.data))
return -EINVAL;
if (is_multicast_ether_addr(addr.data)) {
dev_err(&rc->uwb_dev.dev, "refusing to set multicast "
"MAC address %s\n", buf);
return -EINVAL;
}
result = uwb_rc_mac_addr_set(rc, &addr);
if (result == 0)
rc->uwb_dev.mac_addr = addr;
return result < 0 ? result : size;
}
DEVICE_ATTR(mac_address, S_IRUGO | S_IWUSR, uwb_rc_mac_addr_show, uwb_rc_mac_addr_store);
/** Print @addr to @buf, @return bytes written */
size_t __uwb_addr_print(char *buf, size_t buf_size, const unsigned char *addr,
int type)
{
size_t result;
if (type)
result = scnprintf(buf, buf_size, "%pM", addr);
else
result = scnprintf(buf, buf_size, "%02x:%02x",
addr[1], addr[0]);
return result;
}
EXPORT_SYMBOL_GPL(__uwb_addr_print);