hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
linux-sg2042/include/asm-arm/arch-ixp2000/ixp2000-regs.h

458 lines
18 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* include/asm-arm/arch-ixp2000/ixp2000-regs.h
*
* Chipset register definitions for IXP2400/2800 based systems.
*
* Original Author: Naeem Afzal <naeem.m.afzal@intel.com>
*
* Maintainer: Deepak Saxena <dsaxena@plexity.net>
*
* Copyright (C) 2002 Intel Corp.
* Copyright (C) 2003-2004 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifndef _IXP2000_REGS_H_
#define _IXP2000_REGS_H_
[PATCH] ARM: 2755/1: describe ixp2000 virtual memory map layout Patch from Lennert Buytenhek Add a comment to asm/arch-ixp2000/ixp2000-regs.h describing the ixp2000 virtual memory map layout. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Deepak Saxena Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-27 05:24:16 +08:00
/*
* IXP2000 linux memory map:
*
* virt phys size
* fb000000 db000000 16M PCI CFG1
* fc000000 da000000 16M PCI CFG0
* fd000000 d8000000 16M PCI I/O
* fe[0-7]00000 8M per-platform mappings
[ARM] 3257/1: ixp2000: map in scratch and sram Patch from Lennert Buytenhek For the ixp2000 netdev driver, we need to map in a chunk of SRAM (to store the transmit and receive descriptors) and the scratch get/put area (so that we can use the scratchpad rings in the cpu for managing the descriptors.) These are the final two mappings needed for the netdev driver and the last missing piece for the driver in mainline to work. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-14 04:51:43 +08:00
* fe900000 80000000 1M SRAM #0 (first MB)
* fea00000 cb400000 1M SCRATCH ring get/put
[PATCH] ARM: 2755/1: describe ixp2000 virtual memory map layout Patch from Lennert Buytenhek Add a comment to asm/arch-ixp2000/ixp2000-regs.h describing the ixp2000 virtual memory map layout. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Deepak Saxena Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-27 05:24:16 +08:00
* feb00000 c8000000 1M MSF
* fec00000 df000000 1M PCI CSRs
* fed00000 de000000 1M PCI CREG
* fee00000 d6000000 1M INTCTL
* fef00000 c0000000 1M CAP
*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* Static I/O regions.
*
* Most of the registers are clumped in 4K regions spread throughout
* the 0xc0000000 -> 0xc0100000 address range, but we just map in
* the whole range using a single 1 MB section instead of small
* 4K pages. This has two advantages for us:
*
* 1) We use only one TLB entry for large number of on-chip I/O devices.
*
* 2) We can easily set the Section attributes to XCB=101 on the IXP2400
* as required per erratum #66. We accomplish this by using a
* new MT_IXP2000_DEVICE memory type with the bits set as required.
*
* CAP stands for CSR Access Proxy.
*
* If you change the virtual address of this mapping, please propagate
* the change to arch/arm/kernel/debug.S, which hardcodes the virtual
* address of the UART located in this region.
*/
#define IXP2000_CAP_PHYS_BASE 0xc0000000
#define IXP2000_CAP_VIRT_BASE 0xfef00000
#define IXP2000_CAP_SIZE 0x00100000
/*
[ARM] 3052/1: add ixp2000 microcode loader Patch from Lennert Buytenhek This patch adds a microcode loader for the ixp2000 architecture. The ixp2000 is an xscale-based CPU with a number of additional small CPUs ('microengines') on die that can be programmed to do various things. Depending on the ixp2000 model, there are between 2 and 16 microengines. This code provides an API that allows configuring the microengines, loading code into them, and starting and stopping them and reading out a number of status registers, and is used by the microengine network driver that was recently announced to netdev. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-02 03:53:50 +08:00
* Addresses for specific on-chip peripherals.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*/
#define IXP2000_SLOWPORT_CSR_VIRT_BASE 0xfef80000
#define IXP2000_GLOBAL_REG_VIRT_BASE 0xfef04000
#define IXP2000_UART_PHYS_BASE 0xc0030000
#define IXP2000_UART_VIRT_BASE 0xfef30000
#define IXP2000_TIMER_VIRT_BASE 0xfef20000
[ARM] 3052/1: add ixp2000 microcode loader Patch from Lennert Buytenhek This patch adds a microcode loader for the ixp2000 architecture. The ixp2000 is an xscale-based CPU with a number of additional small CPUs ('microengines') on die that can be programmed to do various things. Depending on the ixp2000 model, there are between 2 and 16 microengines. This code provides an API that allows configuring the microengines, loading code into them, and starting and stopping them and reading out a number of status registers, and is used by the microengine network driver that was recently announced to netdev. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-02 03:53:50 +08:00
#define IXP2000_UENGINE_CSR_VIRT_BASE 0xfef18000
#define IXP2000_GPIO_VIRT_BASE 0xfef10000
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
* Devices outside of the 0xc0000000 -> 0xc0100000 range. The virtual
* addresses of the INTCTL and PCI_CSR mappings are hardcoded in
* entry-macro.S, so if you ever change these please propagate
* the change.
*/
#define IXP2000_INTCTL_PHYS_BASE 0xd6000000
#define IXP2000_INTCTL_VIRT_BASE 0xfee00000
#define IXP2000_INTCTL_SIZE 0x00100000
#define IXP2000_PCI_CREG_PHYS_BASE 0xde000000
#define IXP2000_PCI_CREG_VIRT_BASE 0xfed00000
#define IXP2000_PCI_CREG_SIZE 0x00100000
#define IXP2000_PCI_CSR_PHYS_BASE 0xdf000000
#define IXP2000_PCI_CSR_VIRT_BASE 0xfec00000
#define IXP2000_PCI_CSR_SIZE 0x00100000
[PATCH] ARM: 2756/1: add ixp2000 msf mapping Patch from Lennert Buytenhek Add a mapping for the ixp2400 and ixp2800 msf unit. The msf is the ixp2000's 'media and switch fabric' unit, which handles the networking part of the chip. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Deepak Saxena Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-27 05:24:17 +08:00
#define IXP2000_MSF_PHYS_BASE 0xc8000000
#define IXP2000_MSF_VIRT_BASE 0xfeb00000
#define IXP2000_MSF_SIZE 0x00100000
[ARM] 3257/1: ixp2000: map in scratch and sram Patch from Lennert Buytenhek For the ixp2000 netdev driver, we need to map in a chunk of SRAM (to store the transmit and receive descriptors) and the scratch get/put area (so that we can use the scratchpad rings in the cpu for managing the descriptors.) These are the final two mappings needed for the netdev driver and the last missing piece for the driver in mainline to work. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-14 04:51:43 +08:00
#define IXP2000_SCRATCH_RING_PHYS_BASE 0xcb400000
#define IXP2000_SCRATCH_RING_VIRT_BASE 0xfea00000
#define IXP2000_SCRATCH_RING_SIZE 0x00100000
#define IXP2000_SRAM0_PHYS_BASE 0x80000000
#define IXP2000_SRAM0_VIRT_BASE 0xfe900000
#define IXP2000_SRAM0_SIZE 0x00100000
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define IXP2000_PCI_IO_PHYS_BASE 0xd8000000
#define IXP2000_PCI_IO_VIRT_BASE 0xfd000000
#define IXP2000_PCI_IO_SIZE 0x01000000
#define IXP2000_PCI_CFG0_PHYS_BASE 0xda000000
#define IXP2000_PCI_CFG0_VIRT_BASE 0xfc000000
#define IXP2000_PCI_CFG0_SIZE 0x01000000
#define IXP2000_PCI_CFG1_PHYS_BASE 0xdb000000
#define IXP2000_PCI_CFG1_VIRT_BASE 0xfb000000
#define IXP2000_PCI_CFG1_SIZE 0x01000000
/*
* Timers
*/
#define IXP2000_TIMER_REG(x) ((volatile unsigned long*)(IXP2000_TIMER_VIRT_BASE | (x)))
/* Timer control */
#define IXP2000_T1_CTL IXP2000_TIMER_REG(0x00)
#define IXP2000_T2_CTL IXP2000_TIMER_REG(0x04)
#define IXP2000_T3_CTL IXP2000_TIMER_REG(0x08)
#define IXP2000_T4_CTL IXP2000_TIMER_REG(0x0c)
/* Store initial value */
#define IXP2000_T1_CLD IXP2000_TIMER_REG(0x10)
#define IXP2000_T2_CLD IXP2000_TIMER_REG(0x14)
#define IXP2000_T3_CLD IXP2000_TIMER_REG(0x18)
#define IXP2000_T4_CLD IXP2000_TIMER_REG(0x1c)
/* Read current value */
#define IXP2000_T1_CSR IXP2000_TIMER_REG(0x20)
#define IXP2000_T2_CSR IXP2000_TIMER_REG(0x24)
#define IXP2000_T3_CSR IXP2000_TIMER_REG(0x28)
#define IXP2000_T4_CSR IXP2000_TIMER_REG(0x2c)
/* Clear associated timer interrupt */
#define IXP2000_T1_CLR IXP2000_TIMER_REG(0x30)
#define IXP2000_T2_CLR IXP2000_TIMER_REG(0x34)
#define IXP2000_T3_CLR IXP2000_TIMER_REG(0x38)
#define IXP2000_T4_CLR IXP2000_TIMER_REG(0x3c)
/* Timer watchdog enable for T4 */
#define IXP2000_TWDE IXP2000_TIMER_REG(0x40)
#define WDT_ENABLE 0x00000001
#define TIMER_DIVIDER_256 0x00000008
#define TIMER_ENABLE 0x00000080
#define IRQ_MASK_TIMER1 (1 << 4)
/*
* Interrupt controller registers
*/
#define IXP2000_INTCTL_REG(x) (volatile unsigned long*)(IXP2000_INTCTL_VIRT_BASE | (x))
#define IXP2000_IRQ_STATUS IXP2000_INTCTL_REG(0x08)
#define IXP2000_IRQ_ENABLE IXP2000_INTCTL_REG(0x10)
#define IXP2000_IRQ_ENABLE_SET IXP2000_INTCTL_REG(0x10)
#define IXP2000_IRQ_ENABLE_CLR IXP2000_INTCTL_REG(0x18)
#define IXP2000_FIQ_ENABLE_CLR IXP2000_INTCTL_REG(0x14)
#define IXP2000_IRQ_ERR_STATUS IXP2000_INTCTL_REG(0x24)
#define IXP2000_IRQ_ERR_ENABLE_SET IXP2000_INTCTL_REG(0x2c)
#define IXP2000_FIQ_ERR_ENABLE_CLR IXP2000_INTCTL_REG(0x30)
#define IXP2000_IRQ_ERR_ENABLE_CLR IXP2000_INTCTL_REG(0x34)
#define IXP2000_IRQ_THD_RAW_STATUS_A_0 IXP2000_INTCTL_REG(0x60)
#define IXP2000_IRQ_THD_RAW_STATUS_A_1 IXP2000_INTCTL_REG(0x64)
#define IXP2000_IRQ_THD_RAW_STATUS_A_2 IXP2000_INTCTL_REG(0x68)
#define IXP2000_IRQ_THD_RAW_STATUS_A_3 IXP2000_INTCTL_REG(0x6c)
#define IXP2000_IRQ_THD_RAW_STATUS_B_0 IXP2000_INTCTL_REG(0x80)
#define IXP2000_IRQ_THD_RAW_STATUS_B_1 IXP2000_INTCTL_REG(0x84)
#define IXP2000_IRQ_THD_RAW_STATUS_B_2 IXP2000_INTCTL_REG(0x88)
#define IXP2000_IRQ_THD_RAW_STATUS_B_3 IXP2000_INTCTL_REG(0x8c)
[ARM] 3224/1: add masked thread interrupt status registers for ixp2000 Patch from Lennert Buytenhek In its interrupt handler, the (NAPI) ixp2000 netdev driver needs to use the masked thread interrupt status register (instead of the raw one) to prevent scheduling polling when polling is already running when a TXdone interrupt comes in. The definitions for the masked status registers were not in yet, so this patch adds them. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-05 01:17:16 +08:00
#define IXP2000_IRQ_THD_STATUS_A_0 IXP2000_INTCTL_REG(0xe0)
#define IXP2000_IRQ_THD_STATUS_A_1 IXP2000_INTCTL_REG(0xe4)
#define IXP2000_IRQ_THD_STATUS_A_2 IXP2000_INTCTL_REG(0xe8)
#define IXP2000_IRQ_THD_STATUS_A_3 IXP2000_INTCTL_REG(0xec)
#define IXP2000_IRQ_THD_STATUS_B_0 IXP2000_INTCTL_REG(0x100)
#define IXP2000_IRQ_THD_STATUS_B_1 IXP2000_INTCTL_REG(0x104)
#define IXP2000_IRQ_THD_STATUS_B_2 IXP2000_INTCTL_REG(0x108)
#define IXP2000_IRQ_THD_STATUS_B_3 IXP2000_INTCTL_REG(0x10c)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define IXP2000_IRQ_THD_ENABLE_SET_A_0 IXP2000_INTCTL_REG(0x160)
#define IXP2000_IRQ_THD_ENABLE_SET_A_1 IXP2000_INTCTL_REG(0x164)
#define IXP2000_IRQ_THD_ENABLE_SET_A_2 IXP2000_INTCTL_REG(0x168)
#define IXP2000_IRQ_THD_ENABLE_SET_A_3 IXP2000_INTCTL_REG(0x16c)
#define IXP2000_IRQ_THD_ENABLE_SET_B_0 IXP2000_INTCTL_REG(0x180)
#define IXP2000_IRQ_THD_ENABLE_SET_B_1 IXP2000_INTCTL_REG(0x184)
#define IXP2000_IRQ_THD_ENABLE_SET_B_2 IXP2000_INTCTL_REG(0x188)
#define IXP2000_IRQ_THD_ENABLE_SET_B_3 IXP2000_INTCTL_REG(0x18c)
#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_0 IXP2000_INTCTL_REG(0x1e0)
#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_1 IXP2000_INTCTL_REG(0x1e4)
#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_2 IXP2000_INTCTL_REG(0x1e8)
#define IXP2000_IRQ_THD_ENABLE_CLEAR_A_3 IXP2000_INTCTL_REG(0x1ec)
#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_0 IXP2000_INTCTL_REG(0x200)
#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_1 IXP2000_INTCTL_REG(0x204)
#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_2 IXP2000_INTCTL_REG(0x208)
#define IXP2000_IRQ_THD_ENABLE_CLEAR_B_3 IXP2000_INTCTL_REG(0x20c)
/*
* Mask of valid IRQs in the 32-bit IRQ register. We use
* this to mark certain IRQs as being invalid.
*/
#define IXP2000_VALID_IRQ_MASK 0x0f0fffff
/*
* PCI config register access from core
*/
#define IXP2000_PCI_CREG(x) (volatile unsigned long*)(IXP2000_PCI_CREG_VIRT_BASE | (x))
#define IXP2000_PCI_CMDSTAT IXP2000_PCI_CREG(0x04)
#define IXP2000_PCI_CSR_BAR IXP2000_PCI_CREG(0x10)
#define IXP2000_PCI_SRAM_BAR IXP2000_PCI_CREG(0x14)
#define IXP2000_PCI_SDRAM_BAR IXP2000_PCI_CREG(0x18)
/*
* PCI CSRs
*/
#define IXP2000_PCI_CSR(x) (volatile unsigned long*)(IXP2000_PCI_CSR_VIRT_BASE | (x))
/*
* PCI outbound interrupts
*/
#define IXP2000_PCI_OUT_INT_STATUS IXP2000_PCI_CSR(0x30)
#define IXP2000_PCI_OUT_INT_MASK IXP2000_PCI_CSR(0x34)
/*
* PCI communications
*/
#define IXP2000_PCI_MAILBOX0 IXP2000_PCI_CSR(0x50)
#define IXP2000_PCI_MAILBOX1 IXP2000_PCI_CSR(0x54)
#define IXP2000_PCI_MAILBOX2 IXP2000_PCI_CSR(0x58)
#define IXP2000_PCI_MAILBOX3 IXP2000_PCI_CSR(0x5C)
#define IXP2000_XSCALE_DOORBELL IXP2000_PCI_CSR(0x60)
#define IXP2000_XSCALE_DOORBELL_SETUP IXP2000_PCI_CSR(0x64)
#define IXP2000_PCI_DOORBELL IXP2000_PCI_CSR(0x70)
#define IXP2000_PCI_DOORBELL_SETUP IXP2000_PCI_CSR(0x74)
/*
* DMA engines
*/
#define IXP2000_PCI_CH1_BYTE_CNT IXP2000_PCI_CSR(0x80)
#define IXP2000_PCI_CH1_ADDR IXP2000_PCI_CSR(0x84)
#define IXP2000_PCI_CH1_DRAM_ADDR IXP2000_PCI_CSR(0x88)
#define IXP2000_PCI_CH1_DESC_PTR IXP2000_PCI_CSR(0x8C)
#define IXP2000_PCI_CH1_CNTRL IXP2000_PCI_CSR(0x90)
#define IXP2000_PCI_CH1_ME_PARAM IXP2000_PCI_CSR(0x94)
#define IXP2000_PCI_CH2_BYTE_CNT IXP2000_PCI_CSR(0xA0)
#define IXP2000_PCI_CH2_ADDR IXP2000_PCI_CSR(0xA4)
#define IXP2000_PCI_CH2_DRAM_ADDR IXP2000_PCI_CSR(0xA8)
#define IXP2000_PCI_CH2_DESC_PTR IXP2000_PCI_CSR(0xAC)
#define IXP2000_PCI_CH2_CNTRL IXP2000_PCI_CSR(0xB0)
#define IXP2000_PCI_CH2_ME_PARAM IXP2000_PCI_CSR(0xB4)
#define IXP2000_PCI_CH3_BYTE_CNT IXP2000_PCI_CSR(0xC0)
#define IXP2000_PCI_CH3_ADDR IXP2000_PCI_CSR(0xC4)
#define IXP2000_PCI_CH3_DRAM_ADDR IXP2000_PCI_CSR(0xC8)
#define IXP2000_PCI_CH3_DESC_PTR IXP2000_PCI_CSR(0xCC)
#define IXP2000_PCI_CH3_CNTRL IXP2000_PCI_CSR(0xD0)
#define IXP2000_PCI_CH3_ME_PARAM IXP2000_PCI_CSR(0xD4)
#define IXP2000_DMA_INF_MODE IXP2000_PCI_CSR(0xE0)
/*
* Size masks for BARs
*/
#define IXP2000_PCI_SRAM_BASE_ADDR_MASK IXP2000_PCI_CSR(0xFC)
#define IXP2000_PCI_DRAM_BASE_ADDR_MASK IXP2000_PCI_CSR(0x100)
/*
* Control and uEngine related
*/
#define IXP2000_PCI_CONTROL IXP2000_PCI_CSR(0x13C)
#define IXP2000_PCI_ADDR_EXT IXP2000_PCI_CSR(0x140)
#define IXP2000_PCI_ME_PUSH_STATUS IXP2000_PCI_CSR(0x148)
#define IXP2000_PCI_ME_PUSH_EN IXP2000_PCI_CSR(0x14C)
#define IXP2000_PCI_ERR_STATUS IXP2000_PCI_CSR(0x150)
#define IXP2000_PCI_ERR_ENABLE IXP2000_PCI_CSR(0x154)
/*
* Inbound PCI interrupt control
*/
#define IXP2000_PCI_XSCALE_INT_STATUS IXP2000_PCI_CSR(0x158)
#define IXP2000_PCI_XSCALE_INT_ENABLE IXP2000_PCI_CSR(0x15C)
#define IXP2000_PCICNTL_PNR (1<<17) /* PCI not Reset bit of PCI_CONTROL */
[ARM] 3065/1: ixp2000 typo and whitespace fixes Patch from Lennert Buytenhek Misc ixp2000 typo and whitespace fixes. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-02 03:44:27 +08:00
#define IXP2000_PCICNTL_PCF (1<<28) /* PCI Central function bit */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define IXP2000_XSCALE_INT (1<<1) /* Interrupt from XScale to PCI */
/* These are from the IRQ register in the PCI ISR register */
#define PCI_CONTROL_BE_DEO (1 << 22) /* Big Endian Data Enable Out */
#define PCI_CONTROL_BE_DEI (1 << 21) /* Big Endian Data Enable In */
#define PCI_CONTROL_BE_BEO (1 << 20) /* Big Endian Byte Enable Out */
#define PCI_CONTROL_BE_BEI (1 << 19) /* Big Endian Byte Enable In */
[PATCH] ARM: 2752/1: disable ixp2000 PCI I/O software workaround on chips that don't need it Patch from Lennert Buytenhek The later ixp2000 models don't need the PCI I/O workaround that we currently perform. Add a config option to disable the workaround, and panic on boot if a kernel without the workaround is booted on a buggy chip. As only pre-production ixp2000s need the workaround, the default is for it not to be configured in. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Deepak Saxena Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-26 02:30:04 +08:00
#define PCI_CONTROL_IEE (1 << 17) /* I/O cycle Endian swap Enable */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define IXP2000_PCI_RST_REL (1 << 2)
#define CFG_RST_DIR (*IXP2000_PCI_CONTROL & IXP2000_PCICNTL_PCF)
#define CFG_PCI_BOOT_HOST (1 << 2)
#define CFG_BOOT_PROM (1 << 1)
/*
* SlowPort CSRs
*
* The slowport is used to access things like flash, SONET framer control
* ports, slave microprocessors, CPLDs, and others of chip memory mapped
* peripherals.
*/
#define SLOWPORT_CSR(x) (volatile unsigned long*)(IXP2000_SLOWPORT_CSR_VIRT_BASE | (x))
#define IXP2000_SLOWPORT_CCR SLOWPORT_CSR(0x00)
#define IXP2000_SLOWPORT_WTC1 SLOWPORT_CSR(0x04)
#define IXP2000_SLOWPORT_WTC2 SLOWPORT_CSR(0x08)
#define IXP2000_SLOWPORT_RTC1 SLOWPORT_CSR(0x0c)
#define IXP2000_SLOWPORT_RTC2 SLOWPORT_CSR(0x10)
#define IXP2000_SLOWPORT_FSR SLOWPORT_CSR(0x14)
#define IXP2000_SLOWPORT_PCR SLOWPORT_CSR(0x18)
#define IXP2000_SLOWPORT_ADC SLOWPORT_CSR(0x1C)
#define IXP2000_SLOWPORT_FAC SLOWPORT_CSR(0x20)
#define IXP2000_SLOWPORT_FRM SLOWPORT_CSR(0x24)
#define IXP2000_SLOWPORT_FIN SLOWPORT_CSR(0x28)
/*
* CCR values.
* The CCR configures the clock division for the slowport interface.
*/
#define SLOWPORT_CCR_DIV_1 0x00
#define SLOWPORT_CCR_DIV_2 0x01
#define SLOWPORT_CCR_DIV_4 0x02
#define SLOWPORT_CCR_DIV_6 0x03
#define SLOWPORT_CCR_DIV_8 0x04
#define SLOWPORT_CCR_DIV_10 0x05
#define SLOWPORT_CCR_DIV_12 0x06
#define SLOWPORT_CCR_DIV_14 0x07
#define SLOWPORT_CCR_DIV_16 0x08
#define SLOWPORT_CCR_DIV_18 0x09
#define SLOWPORT_CCR_DIV_20 0x0a
#define SLOWPORT_CCR_DIV_22 0x0b
#define SLOWPORT_CCR_DIV_24 0x0c
#define SLOWPORT_CCR_DIV_26 0x0d
#define SLOWPORT_CCR_DIV_28 0x0e
#define SLOWPORT_CCR_DIV_30 0x0f
/*
* PCR values. PCR configure the mode of the interface.
*/
#define SLOWPORT_MODE_FLASH 0x00
#define SLOWPORT_MODE_LUCENT 0x01
#define SLOWPORT_MODE_PMC_SIERRA 0x02
#define SLOWPORT_MODE_INTEL_UP 0x03
#define SLOWPORT_MODE_MOTOROLA_UP 0x04
/*
* ADC values. Defines data and address bus widths.
*/
#define SLOWPORT_ADDR_WIDTH_8 0x00
#define SLOWPORT_ADDR_WIDTH_16 0x01
#define SLOWPORT_ADDR_WIDTH_24 0x02
#define SLOWPORT_ADDR_WIDTH_32 0x03
#define SLOWPORT_DATA_WIDTH_8 0x00
#define SLOWPORT_DATA_WIDTH_16 0x10
#define SLOWPORT_DATA_WIDTH_24 0x20
#define SLOWPORT_DATA_WIDTH_32 0x30
/*
* Masks and shifts for various fields in the WTC and RTC registers.
*/
#define SLOWPORT_WRTC_MASK_HD 0x0003
[ARM] 3381/1: ixp2000: fix slowport write timing control register fields Patch from Lennert Buytenhek The original version of the chip docs had the PW and SU fields in the slowport write timing control register accidentally reversed. This is mentioned in the errata (documentation change #4) and fixed in newer docs. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-23 04:14:11 +08:00
#define SLOWPORT_WRTC_MASK_PW 0x003c
#define SLOWPORT_WRTC_MASK_SU 0x03c0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define SLOWPORT_WRTC_SHIFT_HD 0x00
#define SLOWPORT_WRTC_SHIFT_SU 0x02
#define SLOWPORT_WRTC_SHFIT_PW 0x06
/*
* GPIO registers & GPIO interface.
*/
#define IXP2000_GPIO_REG(x) ((volatile unsigned long*)(IXP2000_GPIO_VIRT_BASE+(x)))
#define IXP2000_GPIO_PLR IXP2000_GPIO_REG(0x00)
#define IXP2000_GPIO_PDPR IXP2000_GPIO_REG(0x04)
#define IXP2000_GPIO_PDSR IXP2000_GPIO_REG(0x08)
#define IXP2000_GPIO_PDCR IXP2000_GPIO_REG(0x0c)
#define IXP2000_GPIO_POPR IXP2000_GPIO_REG(0x10)
#define IXP2000_GPIO_POSR IXP2000_GPIO_REG(0x14)
#define IXP2000_GPIO_POCR IXP2000_GPIO_REG(0x18)
#define IXP2000_GPIO_REDR IXP2000_GPIO_REG(0x1c)
#define IXP2000_GPIO_FEDR IXP2000_GPIO_REG(0x20)
#define IXP2000_GPIO_EDSR IXP2000_GPIO_REG(0x24)
#define IXP2000_GPIO_LSHR IXP2000_GPIO_REG(0x28)
#define IXP2000_GPIO_LSLR IXP2000_GPIO_REG(0x2c)
#define IXP2000_GPIO_LDSR IXP2000_GPIO_REG(0x30)
#define IXP2000_GPIO_INER IXP2000_GPIO_REG(0x34)
#define IXP2000_GPIO_INSR IXP2000_GPIO_REG(0x38)
#define IXP2000_GPIO_INCR IXP2000_GPIO_REG(0x3c)
#define IXP2000_GPIO_INST IXP2000_GPIO_REG(0x40)
/*
* "Global" registers...whatever that's supposed to mean.
*/
#define GLOBAL_REG_BASE (IXP2000_GLOBAL_REG_VIRT_BASE + 0x0a00)
#define GLOBAL_REG(x) (volatile unsigned long*)(GLOBAL_REG_BASE | (x))
#define IXP2000_MAJ_PROD_TYPE_MASK 0x001F0000
#define IXP2000_MAJ_PROD_TYPE_IXP2000 0x00000000
#define IXP2000_MIN_PROD_TYPE_MASK 0x0000FF00
#define IXP2000_MIN_PROD_TYPE_IXP2400 0x00000200
#define IXP2000_MIN_PROD_TYPE_IXP2850 0x00000100
#define IXP2000_MIN_PROD_TYPE_IXP2800 0x00000000
#define IXP2000_MAJ_REV_MASK 0x000000F0
#define IXP2000_MIN_REV_MASK 0x0000000F
#define IXP2000_PROD_ID_MASK 0xFFFFFFFF
[PATCH] ARM: 2701/1: free up ixp2000 timer 4 for the watchdog Patch from Lennert Buytenhek The IXP2000 has four timers, but if we're on an A-step IXP2800, timer 2 and 3 don't work. We need two timers for timekeeping (one for the timer interrupt and one for tracking missed jiffies), so on early IXP2800s we have no other choice but to use timer 1 and 4 for that, but on all other IXP2000s we'd rather leave timer 4 free since that's the only timer we can use for the watchdog. So, on buggy IXP2000s (i.e. the A-step IXP2800) we use timer 4 for tracking missed jiffies, and on all all non-buggy IXP2000s (i.e. everything but the A-step IXP2800) we use timer 2. On a pre-production IXP2800, this patch should print these messages on boot: Enabling IXP2800 erratum #25 workaround Unable to use IXP2000 watchdog due to IXP2800 erratum #25 On any non-buggy IXP2800 (as well as on IXP2400s) you shouldn't see anything at all, and the watchdog should be usable again. Signed-off-by: Lennert Buytenhek Signed-off-by: Deepak Saxena Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-21 01:51:07 +08:00
#define IXP2000_PRODUCT_ID GLOBAL_REG(0x00)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define IXP2000_MISC_CONTROL GLOBAL_REG(0x04)
#define IXP2000_MSF_CLK_CNTRL GLOBAL_REG(0x08)
#define IXP2000_RESET0 GLOBAL_REG(0x0c)
#define IXP2000_RESET1 GLOBAL_REG(0x10)
#define IXP2000_CCR GLOBAL_REG(0x14)
#define IXP2000_STRAP_OPTIONS GLOBAL_REG(0x18)
#define RSTALL (1 << 16)
#define WDT_RESET_ENABLE 0x01000000
[ARM] 2908/1: add register definitions for ixp2000 msf Patch from Lennert Buytenhek We already had a mapping for the msf, but we didn't have any register definitions for it yet. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-28 22:31:45 +08:00
/*
* MSF registers. The IXP2400 and IXP2800 have somewhat different MSF
* units, but the registers that differ between the two don't overlap,
* so we can have one register list for both.
*/
#define IXP2000_MSF_REG(x) ((volatile unsigned long*)(IXP2000_MSF_VIRT_BASE + (x)))
#define IXP2000_MSF_RX_CONTROL IXP2000_MSF_REG(0x0000)
#define IXP2000_MSF_TX_CONTROL IXP2000_MSF_REG(0x0004)
#define IXP2000_MSF_INTERRUPT_STATUS IXP2000_MSF_REG(0x0008)
#define IXP2000_MSF_INTERRUPT_ENABLE IXP2000_MSF_REG(0x000c)
#define IXP2000_MSF_CSIX_TYPE_MAP IXP2000_MSF_REG(0x0010)
#define IXP2000_MSF_FC_EGRESS_STATUS IXP2000_MSF_REG(0x0014)
#define IXP2000_MSF_FC_INGRESS_STATUS IXP2000_MSF_REG(0x0018)
#define IXP2000_MSF_HWM_CONTROL IXP2000_MSF_REG(0x0024)
#define IXP2000_MSF_FC_STATUS_OVERRIDE IXP2000_MSF_REG(0x0028)
#define IXP2000_MSF_CLOCK_CONTROL IXP2000_MSF_REG(0x002c)
#define IXP2000_MSF_RX_PORT_MAP IXP2000_MSF_REG(0x0040)
#define IXP2000_MSF_RBUF_ELEMENT_DONE IXP2000_MSF_REG(0x0044)
#define IXP2000_MSF_RX_MPHY_POLL_LIMIT IXP2000_MSF_REG(0x0048)
#define IXP2000_MSF_RX_CALENDAR_LENGTH IXP2000_MSF_REG(0x0048)
#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_0 IXP2000_MSF_REG(0x0050)
#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_1 IXP2000_MSF_REG(0x0054)
#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_2 IXP2000_MSF_REG(0x0058)
#define IXP2000_MSF_TX_SEQUENCE_0 IXP2000_MSF_REG(0x0060)
#define IXP2000_MSF_TX_SEQUENCE_1 IXP2000_MSF_REG(0x0064)
#define IXP2000_MSF_TX_SEQUENCE_2 IXP2000_MSF_REG(0x0068)
#define IXP2000_MSF_TX_MPHY_POLL_LIMIT IXP2000_MSF_REG(0x0070)
#define IXP2000_MSF_TX_CALENDAR_LENGTH IXP2000_MSF_REG(0x0070)
#define IXP2000_MSF_RX_UP_CONTROL_0 IXP2000_MSF_REG(0x0080)
#define IXP2000_MSF_RX_UP_CONTROL_1 IXP2000_MSF_REG(0x0084)
#define IXP2000_MSF_RX_UP_CONTROL_2 IXP2000_MSF_REG(0x0088)
#define IXP2000_MSF_RX_UP_CONTROL_3 IXP2000_MSF_REG(0x008c)
#define IXP2000_MSF_TX_UP_CONTROL_0 IXP2000_MSF_REG(0x0090)
#define IXP2000_MSF_TX_UP_CONTROL_1 IXP2000_MSF_REG(0x0094)
#define IXP2000_MSF_TX_UP_CONTROL_2 IXP2000_MSF_REG(0x0098)
#define IXP2000_MSF_TX_UP_CONTROL_3 IXP2000_MSF_REG(0x009c)
#define IXP2000_MSF_TRAIN_DATA IXP2000_MSF_REG(0x00a0)
#define IXP2000_MSF_TRAIN_CALENDAR IXP2000_MSF_REG(0x00a4)
#define IXP2000_MSF_TRAIN_FLOW_CONTROL IXP2000_MSF_REG(0x00a8)
#define IXP2000_MSF_TX_CALENDAR_0 IXP2000_MSF_REG(0x1000)
#define IXP2000_MSF_RX_PORT_CALENDAR_STATUS IXP2000_MSF_REG(0x1400)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#endif /* _IXP2000_H_ */