hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
linux-sg2042/arch/arm/mach-kirkwood/Makefile

17 lines
734 B
Makefile
Raw Normal View History

ARM: kirkwood: convert to DT irqchip and clocksource With recent support for true irqchip and clocksource drivers for Orion SoCs, now make use of it on DT enabled Kirkwood boards. This also introduces a new Kconfig option for legacy (non-DT) Kirkwood where old code is moved out to and polishes DT board file a little bit. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-07-02 21:15:07 +08:00
obj-y += common.o pcie.o
obj-$(CONFIG_KIRKWOOD_LEGACY) += irq.o mpp.o
ARM: kirkwood: Add standby support Implements standby support for Kirkwood SoC. When the SoC enters standby state the memory PM units are disabled, the DDR is set in self-refresh mode, and the CPU is set in WFI. At this point there's no clock gating, as that is considered each driver's task. Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-08-22 23:49:07 +08:00
obj-$(CONFIG_PM) += pm.o
ARM: Kirkwood: sort board entries by ASCII-code order This patch sorts board entries in files Kconfig, Makefile and kirkwood_defconfig by ASCII-code order. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-04-09 06:41:27 +08:00
obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2-setup.o lacie_v2-common.o
[ARM] Kirkwood: remove duplicated code in LaCie setup files Signed-off-by: Simon Guinot <sguinot@lacie.com> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-09-19 21:33:59 +08:00
obj-$(CONFIG_MACH_NET2BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
ARM: Kirkwood: sort board entries by ASCII-code order This patch sorts board entries in files Kconfig, Makefile and kirkwood_defconfig by ASCII-code order. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-04-09 06:41:27 +08:00
obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o
obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o
obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o
[ARM] Kirkwood: Add support for HP t5325 Thin Client Add support for the HP t5325 Thin Client. This thin client is based on a Marvell Kirkwood chip at 1.2 GHz and features 512 MB RAM, 512 MB SATA-attached flash and an XGI Volari Z11 GPU. Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2010-06-14 03:00:16 +08:00
obj-$(CONFIG_MACH_T5325) += t5325-setup.o
ARM: Kirkwood: sort board entries by ASCII-code order This patch sorts board entries in files Kconfig, Makefile and kirkwood_defconfig by ASCII-code order. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Acked-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-04-09 06:41:27 +08:00
obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o
obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o
[ARM] Kirkwood: CPU idle driver The patch adds support for Kirkwood cpu idle. Two idle states are defined: 1. Wait-for-interrupt (replacing default kirkwood wfi) 2. Wait-for-interrupt and DDR self refresh Signed-off-by: Rabeeh Khoury <rabeeh@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-03-24 22:10:15 +08:00
ARM: kirkwood: add dreamplug (fdt) support. Initially, copied guruplug-setup.c and did s/guruplug/dreamplug/g. Then, switched to SPI based NOR flash. After talking to Arnd Bergman, chose an incremental approach to adding devicetree support. First, we use the dtb to tell us we are on the dreamplug, then we gradually port over drivers. Driver porting will start with the uart (see next patch), and progress from there. Possibly, spi/flash/partitions will be next. When done, board-dt.c will no longer be dreamplug specific, and dt's can be made for the other kirkwood boards. Signed-off-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-28 00:07:13 +08:00
obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o
ARM: kirkwood: convert the mv88f6281gtw_ge board to DT This commit converts the mv88f6281gtw_ge Kirkwood board to use a Device Tree representation, except for the Ethernet devices and the DSA switch. Even though the mv643xx_eth driver has a DT binding, converting this board to use it is for now left on the side because it doesn't use a simple PHY, but a DSA switch instead. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-08-01 23:07:32 +08:00
obj-$(CONFIG_MACH_MV88F6281GTW_GE_DT) += board-mv88f6281gtw_ge.o