linux-sg2042/drivers/s390/crypto/vfio_ap_private.h

105 lines
3.3 KiB
C
Raw Normal View History

s390: vfio-ap: base implementation of VFIO AP device driver Introduces a new AP device driver. This device driver is built on the VFIO mediated device framework. The framework provides sysfs interfaces that facilitate passthrough access by guests to devices installed on the linux host. The VFIO AP device driver will serve two purposes: 1. Provide the interfaces to reserve AP devices for exclusive use by KVM guests. This is accomplished by unbinding the devices to be reserved for guest usage from the zcrypt device driver and binding them to the VFIO AP device driver. 2. Implements the functions, callbacks and sysfs attribute interfaces required to create one or more VFIO mediated devices each of which will be used to configure the AP matrix for a guest and serve as a file descriptor for facilitating communication between QEMU and the VFIO AP device driver. When the VFIO AP device driver is initialized: * It registers with the AP bus for control of type 10 (CEX4 and newer) AP queue devices. This limitation was imposed due to: 1. A desire to keep the code as simple as possible; 2. Some older models are no longer supported by the kernel and others are getting close to end of service. 3. A lack of older systems on which to test older devices. The probe and remove callbacks will be provided to support the binding/unbinding of AP queue devices to/from the VFIO AP device driver. * Creates a matrix device, /sys/devices/vfio_ap/matrix, to serve as the parent of the mediated devices created, one for each guest, and to hold the APQNs of the AP devices bound to the VFIO AP device driver. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-5-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-26 07:16:19 +08:00
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Private data and functions for adjunct processor VFIO matrix driver.
*
* Author(s): Tony Krowiak <akrowiak@linux.ibm.com>
2018-09-26 07:16:20 +08:00
* Halil Pasic <pasic@linux.ibm.com>
* Pierre Morel <pmorel@linux.ibm.com>
s390: vfio-ap: base implementation of VFIO AP device driver Introduces a new AP device driver. This device driver is built on the VFIO mediated device framework. The framework provides sysfs interfaces that facilitate passthrough access by guests to devices installed on the linux host. The VFIO AP device driver will serve two purposes: 1. Provide the interfaces to reserve AP devices for exclusive use by KVM guests. This is accomplished by unbinding the devices to be reserved for guest usage from the zcrypt device driver and binding them to the VFIO AP device driver. 2. Implements the functions, callbacks and sysfs attribute interfaces required to create one or more VFIO mediated devices each of which will be used to configure the AP matrix for a guest and serve as a file descriptor for facilitating communication between QEMU and the VFIO AP device driver. When the VFIO AP device driver is initialized: * It registers with the AP bus for control of type 10 (CEX4 and newer) AP queue devices. This limitation was imposed due to: 1. A desire to keep the code as simple as possible; 2. Some older models are no longer supported by the kernel and others are getting close to end of service. 3. A lack of older systems on which to test older devices. The probe and remove callbacks will be provided to support the binding/unbinding of AP queue devices to/from the VFIO AP device driver. * Creates a matrix device, /sys/devices/vfio_ap/matrix, to serve as the parent of the mediated devices created, one for each guest, and to hold the APQNs of the AP devices bound to the VFIO AP device driver. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-5-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-26 07:16:19 +08:00
*
* Copyright IBM Corp. 2018
*/
#ifndef _VFIO_AP_PRIVATE_H_
#define _VFIO_AP_PRIVATE_H_
#include <linux/types.h>
#include <linux/device.h>
#include <linux/mdev.h>
#include <linux/delay.h>
#include <linux/mutex.h>
s390: ap: kvm: add PQAP interception for AQIC We prepare the interception of the PQAP/AQIC instruction for the case the AQIC facility is enabled in the guest. First of all we do not want to change existing behavior when intercepting AP instructions without the SIE allowing the guest to use AP instructions. In this patch we only handle the AQIC interception allowed by facility 65 which will be enabled when the complete interception infrastructure will be present. We add a callback inside the KVM arch structure for s390 for a VFIO driver to handle a specific response to the PQAP instruction with the AQIC command and only this command. But we want to be able to return a correct answer to the guest even there is no VFIO AP driver in the kernel. Therefor, we inject the correct exceptions from inside KVM for the case the callback is not initialized, which happens when the vfio_ap driver is not loaded. We do consider the responsibility of the driver to always initialize the PQAP callback if it defines queues by initializing the CRYCB for a guest. If the callback has been setup we call it. If not we setup an answer considering that no queue is available for the guest when no callback has been setup. Signed-off-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com> Acked-by: Harald Freudenberger <freude@linux.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-05-21 23:34:34 +08:00
#include <linux/kvm_host.h>
s390: vfio-ap: base implementation of VFIO AP device driver Introduces a new AP device driver. This device driver is built on the VFIO mediated device framework. The framework provides sysfs interfaces that facilitate passthrough access by guests to devices installed on the linux host. The VFIO AP device driver will serve two purposes: 1. Provide the interfaces to reserve AP devices for exclusive use by KVM guests. This is accomplished by unbinding the devices to be reserved for guest usage from the zcrypt device driver and binding them to the VFIO AP device driver. 2. Implements the functions, callbacks and sysfs attribute interfaces required to create one or more VFIO mediated devices each of which will be used to configure the AP matrix for a guest and serve as a file descriptor for facilitating communication between QEMU and the VFIO AP device driver. When the VFIO AP device driver is initialized: * It registers with the AP bus for control of type 10 (CEX4 and newer) AP queue devices. This limitation was imposed due to: 1. A desire to keep the code as simple as possible; 2. Some older models are no longer supported by the kernel and others are getting close to end of service. 3. A lack of older systems on which to test older devices. The probe and remove callbacks will be provided to support the binding/unbinding of AP queue devices to/from the VFIO AP device driver. * Creates a matrix device, /sys/devices/vfio_ap/matrix, to serve as the parent of the mediated devices created, one for each guest, and to hold the APQNs of the AP devices bound to the VFIO AP device driver. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-5-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-26 07:16:19 +08:00
#include "ap_bus.h"
#define VFIO_AP_MODULE_NAME "vfio_ap"
#define VFIO_AP_DRV_NAME "vfio_ap"
/**
* ap_matrix_dev - the AP matrix device structure
* @device: generic device structure associated with the AP matrix device
2018-09-26 07:16:20 +08:00
* @available_instances: number of mediated matrix devices that can be created
* @info: the struct containing the output from the PQAP(QCI) instruction
* mdev_list: the list of mediated matrix devices created
* lock: mutex for locking the AP matrix device. This lock will be
* taken every time we fiddle with state managed by the vfio_ap
* driver, be it using @mdev_list or writing the state of a
* single ap_matrix_mdev device. It's quite coarse but we don't
* expect much contention.
s390: vfio-ap: base implementation of VFIO AP device driver Introduces a new AP device driver. This device driver is built on the VFIO mediated device framework. The framework provides sysfs interfaces that facilitate passthrough access by guests to devices installed on the linux host. The VFIO AP device driver will serve two purposes: 1. Provide the interfaces to reserve AP devices for exclusive use by KVM guests. This is accomplished by unbinding the devices to be reserved for guest usage from the zcrypt device driver and binding them to the VFIO AP device driver. 2. Implements the functions, callbacks and sysfs attribute interfaces required to create one or more VFIO mediated devices each of which will be used to configure the AP matrix for a guest and serve as a file descriptor for facilitating communication between QEMU and the VFIO AP device driver. When the VFIO AP device driver is initialized: * It registers with the AP bus for control of type 10 (CEX4 and newer) AP queue devices. This limitation was imposed due to: 1. A desire to keep the code as simple as possible; 2. Some older models are no longer supported by the kernel and others are getting close to end of service. 3. A lack of older systems on which to test older devices. The probe and remove callbacks will be provided to support the binding/unbinding of AP queue devices to/from the VFIO AP device driver. * Creates a matrix device, /sys/devices/vfio_ap/matrix, to serve as the parent of the mediated devices created, one for each guest, and to hold the APQNs of the AP devices bound to the VFIO AP device driver. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-5-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-26 07:16:19 +08:00
*/
struct ap_matrix_dev {
struct device device;
2018-09-26 07:16:20 +08:00
atomic_t available_instances;
struct ap_config_info info;
struct list_head mdev_list;
struct mutex lock;
struct ap_driver *vfio_ap_drv;
s390: vfio-ap: base implementation of VFIO AP device driver Introduces a new AP device driver. This device driver is built on the VFIO mediated device framework. The framework provides sysfs interfaces that facilitate passthrough access by guests to devices installed on the linux host. The VFIO AP device driver will serve two purposes: 1. Provide the interfaces to reserve AP devices for exclusive use by KVM guests. This is accomplished by unbinding the devices to be reserved for guest usage from the zcrypt device driver and binding them to the VFIO AP device driver. 2. Implements the functions, callbacks and sysfs attribute interfaces required to create one or more VFIO mediated devices each of which will be used to configure the AP matrix for a guest and serve as a file descriptor for facilitating communication between QEMU and the VFIO AP device driver. When the VFIO AP device driver is initialized: * It registers with the AP bus for control of type 10 (CEX4 and newer) AP queue devices. This limitation was imposed due to: 1. A desire to keep the code as simple as possible; 2. Some older models are no longer supported by the kernel and others are getting close to end of service. 3. A lack of older systems on which to test older devices. The probe and remove callbacks will be provided to support the binding/unbinding of AP queue devices to/from the VFIO AP device driver. * Creates a matrix device, /sys/devices/vfio_ap/matrix, to serve as the parent of the mediated devices created, one for each guest, and to hold the APQNs of the AP devices bound to the VFIO AP device driver. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-5-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-26 07:16:19 +08:00
};
extern struct ap_matrix_dev *matrix_dev;
2018-09-26 07:16:20 +08:00
/**
* The AP matrix is comprised of three bit masks identifying the adapters,
* queues (domains) and control domains that belong to an AP matrix. The bits i
* each mask, from least significant to most significant bit, correspond to IDs
* 0 to 255. When a bit is set, the corresponding ID belongs to the matrix.
*
* @apm_max: max adapter number in @apm
* @apm identifies the AP adapters in the matrix
* @aqm_max: max domain number in @aqm
* @aqm identifies the AP queues (domains) in the matrix
* @adm_max: max domain number in @adm
* @adm identifies the AP control domains in the matrix
*/
struct ap_matrix {
unsigned long apm_max;
DECLARE_BITMAP(apm, 256);
unsigned long aqm_max;
DECLARE_BITMAP(aqm, 256);
unsigned long adm_max;
DECLARE_BITMAP(adm, 256);
};
/**
* struct ap_matrix_mdev - the mediated matrix device structure
* @list: allows the ap_matrix_mdev struct to be added to a list
* @matrix: the adapters, usage domains and control domains assigned to the
* mediated matrix device.
* @group_notifier: notifier block used for specifying callback function for
* handling the VFIO_GROUP_NOTIFY_SET_KVM event
* @kvm: the struct holding guest's state
2018-09-26 07:16:20 +08:00
*/
struct ap_matrix_mdev {
struct list_head node;
struct ap_matrix matrix;
struct notifier_block group_notifier;
struct notifier_block iommu_notifier;
struct kvm *kvm;
s390: ap: kvm: add PQAP interception for AQIC We prepare the interception of the PQAP/AQIC instruction for the case the AQIC facility is enabled in the guest. First of all we do not want to change existing behavior when intercepting AP instructions without the SIE allowing the guest to use AP instructions. In this patch we only handle the AQIC interception allowed by facility 65 which will be enabled when the complete interception infrastructure will be present. We add a callback inside the KVM arch structure for s390 for a VFIO driver to handle a specific response to the PQAP instruction with the AQIC command and only this command. But we want to be able to return a correct answer to the guest even there is no VFIO AP driver in the kernel. Therefor, we inject the correct exceptions from inside KVM for the case the callback is not initialized, which happens when the vfio_ap driver is not loaded. We do consider the responsibility of the driver to always initialize the PQAP callback if it defines queues by initializing the CRYCB for a guest. If the callback has been setup we call it. If not we setup an answer considering that no queue is available for the guest when no callback has been setup. Signed-off-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com> Acked-by: Harald Freudenberger <freude@linux.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-05-21 23:34:34 +08:00
struct kvm_s390_module_hook pqap_hook;
struct mdev_device *mdev;
2018-09-26 07:16:20 +08:00
};
extern int vfio_ap_mdev_register(void);
extern void vfio_ap_mdev_unregister(void);
int vfio_ap_mdev_reset_queue(unsigned int apid, unsigned int apqi,
unsigned int retry);
2018-09-26 07:16:20 +08:00
struct vfio_ap_queue {
struct ap_matrix_mdev *matrix_mdev;
unsigned long saved_pfn;
int apqn;
#define VFIO_AP_ISC_INVALID 0xff
unsigned char saved_isc;
};
struct ap_queue_status vfio_ap_irq_disable(struct vfio_ap_queue *q);
s390: vfio-ap: base implementation of VFIO AP device driver Introduces a new AP device driver. This device driver is built on the VFIO mediated device framework. The framework provides sysfs interfaces that facilitate passthrough access by guests to devices installed on the linux host. The VFIO AP device driver will serve two purposes: 1. Provide the interfaces to reserve AP devices for exclusive use by KVM guests. This is accomplished by unbinding the devices to be reserved for guest usage from the zcrypt device driver and binding them to the VFIO AP device driver. 2. Implements the functions, callbacks and sysfs attribute interfaces required to create one or more VFIO mediated devices each of which will be used to configure the AP matrix for a guest and serve as a file descriptor for facilitating communication between QEMU and the VFIO AP device driver. When the VFIO AP device driver is initialized: * It registers with the AP bus for control of type 10 (CEX4 and newer) AP queue devices. This limitation was imposed due to: 1. A desire to keep the code as simple as possible; 2. Some older models are no longer supported by the kernel and others are getting close to end of service. 3. A lack of older systems on which to test older devices. The probe and remove callbacks will be provided to support the binding/unbinding of AP queue devices to/from the VFIO AP device driver. * Creates a matrix device, /sys/devices/vfio_ap/matrix, to serve as the parent of the mediated devices created, one for each guest, and to hold the APQNs of the AP devices bound to the VFIO AP device driver. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Tested-by: Michael Mueller <mimu@linux.ibm.com> Tested-by: Farhan Ali <alifm@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20180925231641.4954-5-akrowiak@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-09-26 07:16:19 +08:00
#endif /* _VFIO_AP_PRIVATE_H_ */