hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
linux-sg2042/drivers/usb/musb/Kconfig

166 lines
4.3 KiB
Plaintext
Raw Normal View History

USB: Add MUSB and TUSB support This patch adds support for MUSB and TUSB controllers integrated into omap2430 and davinci. It also adds support for external tusb6010 controller. Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-24 17:27:36 +08:00
#
# USB Dual Role (OTG-ready) Controller Drivers
# for silicon based on Mentor Graphics INVENTRA designs
#
# (M)HDRC = (Multipoint) Highspeed Dual-Role Controller
config USB_MUSB_HDRC
usb: musb: trivial Kconfig cleanups Shuffle the code a bit so the description is at the top. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-20 08:42:22 +08:00
tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
usb: musb: Rework USB and USB_GADGET dependency This USB controller can work in as host-only, gadget-only or dual-role modes. Rework the dependency on the USB and USB_GADGET configs in order to allow building the driver when !USB or !USG_GADGET. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-22 11:08:33 +08:00
depends on (USB || USB_GADGET)
USB: Add MUSB and TUSB support This patch adds support for MUSB and TUSB controllers integrated into omap2430 and davinci. It also adds support for external tusb6010 controller. Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-24 17:27:36 +08:00
help
Say Y here if your system has a dual role high speed USB
controller based on the Mentor Graphics silicon IP. Then
configure options to match your silicon and the board
it's being used with, including the USB peripheral role,
or the USB host role, or both.
usb: musb: fix spelling of families in Kconfig Trivial patch fixin spelling of families in Kconfig [ balbi@ti.com : added the obvious commit log ] Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-08-18 23:34:09 +08:00
Texas Instruments families using this IP include DaVinci
USB: musb: partial DaVinci dm355 support Partial support for DaVinci DM355, on the EVM board; peripheral mode should work, once mainline merges DM355 support. Missing: (a) renumbering the GPIO for DRVVBUS on the DM6446 EVM, when DAVINCI_N_GPIO increases; (b) disabling DM355_DEEPSLEEP.DRVVBUS_OVERRIDE so VBUS is driven according to the ID signal, if cpu_is_..._dm355() The new PHY control bits are ignored on DM6446. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-25 07:31:54 +08:00
(35x, 644x ...), OMAP 243x, OMAP 3, and TUSB 6010.
USB: Add MUSB and TUSB support This patch adds support for MUSB and TUSB controllers integrated into omap2430 and davinci. It also adds support for external tusb6010 controller. Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-24 17:27:36 +08:00
USB: musb: add Blackfin Kconfig options and Makefile Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-03 03:33:49 +08:00
Analog Devices parts using this IP include Blackfin BF54x,
BF525 and BF527.
USB: Add MUSB and TUSB support This patch adds support for MUSB and TUSB controllers integrated into omap2430 and davinci. It also adds support for external tusb6010 controller. Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-24 17:27:36 +08:00
If you do not know what this is, please say N.
usb: musb: allow musb and glue layers to be modules This in part reverts commit 7a180e70cfc56e131bfe4796773df2acfc7d4180. (usb: musb: temporarily make it bool) and while at that we also allow glue layers to be compiled as modules. There are still some other changes needed until we can have a fully functional build with this setup, but we're getting there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-05-11 17:47:59 +08:00
To compile this driver as a module, choose M here; the
module will be called "musb-hdrc".
USB: Add MUSB and TUSB support This patch adds support for MUSB and TUSB controllers integrated into omap2430 and davinci. It also adds support for external tusb6010 controller. Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-24 17:27:36 +08:00
usb: musb: cleanup kconfig The whole thing depends on USB_MUSB_HDRC, just add an 'if'. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-20 08:42:27 +08:00
if USB_MUSB_HDRC
usb: musb: add Kconfig options for HOST, GAGDET or DUAL_ROLE modes This makes building the actual object files optional to the selected mode, which saves users who know which kind of USB mode support they need some binary size. Unimplemented functions are stubbed out with static inline functions. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-04-11 03:55:46 +08:00
choice
bool "MUSB Mode Selection"
default USB_MUSB_DUAL_ROLE if (USB && USB_GADGET)
default USB_MUSB_HOST if (USB && !USB_GADGET)
default USB_MUSB_GADGET if (!USB && USB_GADGET)
config USB_MUSB_HOST
bool "Host only mode"
usb: musb: Rework USB and USB_GADGET dependency This USB controller can work in as host-only, gadget-only or dual-role modes. Rework the dependency on the USB and USB_GADGET configs in order to allow building the driver when !USB or !USG_GADGET. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-22 11:08:33 +08:00
depends on USB=y || USB=USB_MUSB_HDRC
usb: musb: add Kconfig options for HOST, GAGDET or DUAL_ROLE modes This makes building the actual object files optional to the selected mode, which saves users who know which kind of USB mode support they need some binary size. Unimplemented functions are stubbed out with static inline functions. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-04-11 03:55:46 +08:00
help
Select this when you want to use MUSB in host mode only,
thereby the gadget feature will be regressed.
config USB_MUSB_GADGET
bool "Gadget only mode"
usb: musb: Rework USB and USB_GADGET dependency This USB controller can work in as host-only, gadget-only or dual-role modes. Rework the dependency on the USB and USB_GADGET configs in order to allow building the driver when !USB or !USG_GADGET. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-22 11:08:33 +08:00
depends on USB_GADGET=y || USB_GADGET=USB_MUSB_HDRC
usb: musb: USB_MUSB_DUAL_ROLE/USB_MUSB_GADGET should depend on HAS_DMA If NO_DMA=y: drivers/built-in.o: In function `txstate': musb_gadget.c:(.text+0x35955a): undefined reference to `dma_unmap_single' musb_gadget.c:(.text+0x35957e): undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `musb_g_giveback': (.text+0x359672): undefined reference to `dma_mapping_error' drivers/built-in.o: In function `musb_g_giveback': (.text+0x3596ba): undefined reference to `dma_unmap_single' drivers/built-in.o: In function `musb_g_giveback': (.text+0x3596e0): undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `rxstate': musb_gadget.c:(.text+0x3599d0): undefined reference to `dma_unmap_single' musb_gadget.c:(.text+0x3599f6): undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `musb_gadget_queue': musb_gadget.c:(.text+0x35a8c0): undefined reference to `dma_map_single' musb_gadget.c:(.text+0x35a8d0): undefined reference to `dma_mapping_error' musb_gadget.c:(.text+0x35a906): undefined reference to `dma_sync_single_for_cpu' musb_gadget.c:(.text+0x35a9a0): undefined reference to `dma_unmap_single' musb_gadget.c:(.text+0x35a9c8): undefined reference to `dma_sync_single_for_cpu' Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-02-22 03:49:53 +08:00
depends on HAS_DMA
usb: musb: add Kconfig options for HOST, GAGDET or DUAL_ROLE modes This makes building the actual object files optional to the selected mode, which saves users who know which kind of USB mode support they need some binary size. Unimplemented functions are stubbed out with static inline functions. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-04-11 03:55:46 +08:00
help
Select this when you want to use MUSB in gadget mode only,
thereby the host feature will be regressed.
config USB_MUSB_DUAL_ROLE
bool "Dual Role mode"
usb: musb: Rework USB and USB_GADGET dependency This USB controller can work in as host-only, gadget-only or dual-role modes. Rework the dependency on the USB and USB_GADGET configs in order to allow building the driver when !USB or !USG_GADGET. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-22 11:08:33 +08:00
depends on ((USB=y || USB=USB_MUSB_HDRC) && (USB_GADGET=y || USB_GADGET=USB_MUSB_HDRC))
usb: musb: USB_MUSB_DUAL_ROLE/USB_MUSB_GADGET should depend on HAS_DMA If NO_DMA=y: drivers/built-in.o: In function `txstate': musb_gadget.c:(.text+0x35955a): undefined reference to `dma_unmap_single' musb_gadget.c:(.text+0x35957e): undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `musb_g_giveback': (.text+0x359672): undefined reference to `dma_mapping_error' drivers/built-in.o: In function `musb_g_giveback': (.text+0x3596ba): undefined reference to `dma_unmap_single' drivers/built-in.o: In function `musb_g_giveback': (.text+0x3596e0): undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `rxstate': musb_gadget.c:(.text+0x3599d0): undefined reference to `dma_unmap_single' musb_gadget.c:(.text+0x3599f6): undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `musb_gadget_queue': musb_gadget.c:(.text+0x35a8c0): undefined reference to `dma_map_single' musb_gadget.c:(.text+0x35a8d0): undefined reference to `dma_mapping_error' musb_gadget.c:(.text+0x35a906): undefined reference to `dma_sync_single_for_cpu' musb_gadget.c:(.text+0x35a9a0): undefined reference to `dma_unmap_single' musb_gadget.c:(.text+0x35a9c8): undefined reference to `dma_sync_single_for_cpu' Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-02-22 03:49:53 +08:00
depends on HAS_DMA
usb: musb: add Kconfig options for HOST, GAGDET or DUAL_ROLE modes This makes building the actual object files optional to the selected mode, which saves users who know which kind of USB mode support they need some binary size. Unimplemented functions are stubbed out with static inline functions. Signed-off-by: Daniel Mack <zonque@gmail.com> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-04-11 03:55:46 +08:00
help
This is the default mode of working of MUSB controller where
both host and gadget features are enabled.
endchoice
usb: musb: add Kconfig options for each glue layer This will make things simpler when choosing which glue layer to compile. It avoids a lot of magic around the "default" Kconfig option and lets the user choose what exactly s/he wants to compile. Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-01 20:23:48 +08:00
choice
prompt "Platform Glue Layer"
USB: Add MUSB and TUSB support This patch adds support for MUSB and TUSB controllers integrated into omap2430 and davinci. It also adds support for external tusb6010 controller. Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-24 17:27:36 +08:00
usb: musb: add Kconfig options for each glue layer This will make things simpler when choosing which glue layer to compile. It avoids a lot of magic around the "default" Kconfig option and lets the user choose what exactly s/he wants to compile. Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-01 20:23:48 +08:00
config USB_MUSB_DAVINCI
usb: musb: allow musb and glue layers to be modules This in part reverts commit 7a180e70cfc56e131bfe4796773df2acfc7d4180. (usb: musb: temporarily make it bool) and while at that we also allow glue layers to be compiled as modules. There are still some other changes needed until we can have a fully functional build with this setup, but we're getting there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-05-11 17:47:59 +08:00
tristate "DaVinci"
usb: musb: add Kconfig options for each glue layer This will make things simpler when choosing which glue layer to compile. It avoids a lot of magic around the "default" Kconfig option and lets the user choose what exactly s/he wants to compile. Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-01 20:23:48 +08:00
depends on ARCH_DAVINCI_DMx
usb: musb: make davinci and da8xx glues depend on BROKEN those two glues are still including <mach/> headers and no active developement has been going on those glues for quite some time. Apparently, for da8xx glue, only initial commit 3ee076de (usb: musb: introduce DA8xx/OMAP-L1x glue layer) has been tested. All other patches seem to have been compile-tested only. For davinci glue layer, last real commit dates back from 2010, with commit f405387 (USB: MUSB: fix kernel WARNING/oops when unloading module in OTG mode). Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-02-06 15:24:55 +08:00
depends on BROKEN
USB: Add MUSB and TUSB support This patch adds support for MUSB and TUSB controllers integrated into omap2430 and davinci. It also adds support for external tusb6010 controller. Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-24 17:27:36 +08:00
usb: musb: add Kconfig options for each glue layer This will make things simpler when choosing which glue layer to compile. It avoids a lot of magic around the "default" Kconfig option and lets the user choose what exactly s/he wants to compile. Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-01 20:23:48 +08:00
config USB_MUSB_DA8XX
usb: musb: allow musb and glue layers to be modules This in part reverts commit 7a180e70cfc56e131bfe4796773df2acfc7d4180. (usb: musb: temporarily make it bool) and while at that we also allow glue layers to be compiled as modules. There are still some other changes needed until we can have a fully functional build with this setup, but we're getting there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-05-11 17:47:59 +08:00
tristate "DA8xx/OMAP-L1x"
usb: musb: add Kconfig options for each glue layer This will make things simpler when choosing which glue layer to compile. It avoids a lot of magic around the "default" Kconfig option and lets the user choose what exactly s/he wants to compile. Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-01 20:23:48 +08:00
depends on ARCH_DAVINCI_DA8XX
usb: musb: make davinci and da8xx glues depend on BROKEN those two glues are still including <mach/> headers and no active developement has been going on those glues for quite some time. Apparently, for da8xx glue, only initial commit 3ee076de (usb: musb: introduce DA8xx/OMAP-L1x glue layer) has been tested. All other patches seem to have been compile-tested only. For davinci glue layer, last real commit dates back from 2010, with commit f405387 (USB: MUSB: fix kernel WARNING/oops when unloading module in OTG mode). Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-02-06 15:24:55 +08:00
depends on BROKEN
usb: musb: introduce DA8xx/OMAP-L1x glue layer Texas Instruments DA8xx/OMAP-L1x glue layer for the MUSBMHRDC driver. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Yadviga Grigorieva <yadviga@ru.mvista.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-09-24 18:44:03 +08:00
usb: musb: add Kconfig options for each glue layer This will make things simpler when choosing which glue layer to compile. It avoids a lot of magic around the "default" Kconfig option and lets the user choose what exactly s/he wants to compile. Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-01 20:23:48 +08:00
config USB_MUSB_TUSB6010
usb: musb: allow musb and glue layers to be modules This in part reverts commit 7a180e70cfc56e131bfe4796773df2acfc7d4180. (usb: musb: temporarily make it bool) and while at that we also allow glue layers to be compiled as modules. There are still some other changes needed until we can have a fully functional build with this setup, but we're getting there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-05-11 17:47:59 +08:00
tristate "TUSB6010"
USB: Add MUSB and TUSB support This patch adds support for MUSB and TUSB controllers integrated into omap2430 and davinci. It also adds support for external tusb6010 controller. Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-24 17:27:36 +08:00
usb: musb: add Kconfig options for each glue layer This will make things simpler when choosing which glue layer to compile. It avoids a lot of magic around the "default" Kconfig option and lets the user choose what exactly s/he wants to compile. Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-01 20:23:48 +08:00
config USB_MUSB_OMAP2PLUS
usb: musb: allow musb and glue layers to be modules This in part reverts commit 7a180e70cfc56e131bfe4796773df2acfc7d4180. (usb: musb: temporarily make it bool) and while at that we also allow glue layers to be compiled as modules. There are still some other changes needed until we can have a fully functional build with this setup, but we're getting there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-05-11 17:47:59 +08:00
tristate "OMAP2430 and onwards"
usb: musb: add Kconfig options for each glue layer This will make things simpler when choosing which glue layer to compile. It avoids a lot of magic around the "default" Kconfig option and lets the user choose what exactly s/he wants to compile. Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-01 20:23:48 +08:00
depends on ARCH_OMAP2PLUS
usb: musb: omap2430: use the new generic PHY framework Use the generic PHY framework API to get the PHY. The usb_phy_set_resume and usb_phy_set_suspend is replaced with power_on and power_off to align with the new PHY framework. musb->xceiv can't be removed as of now because musb core uses xceiv.state and xceiv.otg. Once there is a separate state machine to handle otg, these can be moved out of xceiv and then we can start using the generic PHY framework. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-27 14:23:30 +08:00
select GENERIC_PHY
USB: Add MUSB and TUSB support This patch adds support for MUSB and TUSB controllers integrated into omap2430 and davinci. It also adds support for external tusb6010 controller. Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-24 17:27:36 +08:00
usb: musb: add Kconfig options for each glue layer This will make things simpler when choosing which glue layer to compile. It avoids a lot of magic around the "default" Kconfig option and lets the user choose what exactly s/he wants to compile. Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-01 20:23:48 +08:00
config USB_MUSB_AM35X
usb: musb: allow musb and glue layers to be modules This in part reverts commit 7a180e70cfc56e131bfe4796773df2acfc7d4180. (usb: musb: temporarily make it bool) and while at that we also allow glue layers to be compiled as modules. There are still some other changes needed until we can have a fully functional build with this setup, but we're getting there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-05-11 17:47:59 +08:00
tristate "AM35x"
usb: musb: add Kconfig options for each glue layer This will make things simpler when choosing which glue layer to compile. It avoids a lot of magic around the "default" Kconfig option and lets the user choose what exactly s/he wants to compile. Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-01 20:23:48 +08:00
depends on ARCH_OMAP
USB: MUSB: Build MUSB driver for OMAP4 This patch updates the Makefile to build the MUSB driver for OMAP4. It also sets the Kconfig options for OMAP4. Signed-off-by: Maulik Mankad <x0082077@ti.com> Cc: David Brownell <david-b@pacbell.net> Cc: Sergei Shtylyov <sshtylyov@mvista.com> Cc: Olof Johansson <olof@lixom.net> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-12 16:29:08 +08:00
usb: musb: Add support for ti81xx platform TI81XX platform has two musb interfaces and uses CPPI4.1 DMA engine. It has builtin USB PHYs as AM35x. The current set of patches adds support for one instance and only in PIO mode. [ balbi@ti.com : make it compile and solve a "may be used uninitialized" warning ] Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Ravi Babu <ravibabu@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-03-12 22:00:22 +08:00
config USB_MUSB_DSPS
tristate "TI DSPS platforms"
usb: musb: dsps: use proper child nodes This moves the two instances from the big node into two child nodes. The glue layer ontop does almost nothing. There is one devices containing the control module for USB (2) phy, (2) usb and later the dma engine. The usb device is the "glue device" which contains the musb device as a child. This is what we do ever since. The new file musb_am335x is just here to prob the new bus and populate child devices. There are a lot of changes to the dsps file as a result of the changes: - musb_core_offset This is gone. The device tree provides memory ressources information for the device there is no need to "fix" things - instances This is gone as well. If we have two instances then we have have two child enabled nodes in the device tree. For instance the SoC in beagle bone has two USB instances but only one has been wired up so there is no need to load and init the second instance since it won't be used. - dsps_glue is now per glue device In the past there was one of this structs but with an array of two and each instance accessed its variable depending on the platform device id. - no unneeded copy of structs I do not know why struct dsps_musb_wrapper is copied but it is not necessary. The same goes for musb_hdrc_platform_data which allocated on demand and then again by platform_device_add_data(). One copy is enough. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-05 20:51:33 +08:00
select USB_MUSB_AM335X_CHILD
usb: musb: dsps: make it depend on OF_IRQ musb_dsps.c utilizes a symbol which is only available when CONFIG_OF_IRQ is set, so make it depend on that. Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-08-13 03:01:14 +08:00
depends on OF_IRQ
usb: musb: Add support for ti81xx platform TI81XX platform has two musb interfaces and uses CPPI4.1 DMA engine. It has builtin USB PHYs as AM35x. The current set of patches adds support for one instance and only in PIO mode. [ balbi@ti.com : make it compile and solve a "may be used uninitialized" warning ] Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Ravi Babu <ravibabu@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-03-12 22:00:22 +08:00
usb: musb: add Kconfig options for each glue layer This will make things simpler when choosing which glue layer to compile. It avoids a lot of magic around the "default" Kconfig option and lets the user choose what exactly s/he wants to compile. Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-01 20:23:48 +08:00
config USB_MUSB_BLACKFIN
usb: musb: allow musb and glue layers to be modules This in part reverts commit 7a180e70cfc56e131bfe4796773df2acfc7d4180. (usb: musb: temporarily make it bool) and while at that we also allow glue layers to be compiled as modules. There are still some other changes needed until we can have a fully functional build with this setup, but we're getting there. Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-05-11 17:47:59 +08:00
tristate "Blackfin"
usb: musb: add Kconfig options for each glue layer This will make things simpler when choosing which glue layer to compile. It avoids a lot of magic around the "default" Kconfig option and lets the user choose what exactly s/he wants to compile. Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-01 20:23:48 +08:00
depends on (BF54x && !BF544) || (BF52x && ! BF522 && !BF523)
USB: musb: add Blackfin Kconfig options and Makefile Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-03 03:33:49 +08:00
usb: musb: add support for ux500 platform Initial support for u8500 and u5500 platform. Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-09 20:05:01 +08:00
config USB_MUSB_UX500
usb: musb: name ux500 platforms more broadly The Kconfig help text is talking about the U5500 which is no longer supported by the kernel. Name the help text after the config symbol which is more correct. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-09-07 00:09:06 +08:00
tristate "Ux500 platforms"
usb: musb: add support for ux500 platform Initial support for u8500 and u5500 platform. Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-09 20:05:01 +08:00
usb: musb: add support for JZ4740 usb device controller Add support for Ingenic JZ4740 USB Device Controller through a specific musb glue layer. JZ4740 UDC not being OTG compatible and missing some hardware registers, this musb glue layer is written from scratch to be used in gadget mode only and take silicon design specifics into account. Signed-off-by: Apelete Seketeli <apelete@seketeli.net> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-20 04:42:26 +08:00
config USB_MUSB_JZ4740
tristate "JZ4740"
depends on MACH_JZ4740 || COMPILE_TEST
depends on USB_MUSB_GADGET
depends on USB_OTG_BLACKLIST_HUB
usb: musb: add Kconfig options for each glue layer This will make things simpler when choosing which glue layer to compile. It avoids a lot of magic around the "default" Kconfig option and lets the user choose what exactly s/he wants to compile. Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-01 20:23:48 +08:00
endchoice
USB: Add MUSB and TUSB support This patch adds support for MUSB and TUSB controllers integrated into omap2430 and davinci. It also adds support for external tusb6010 controller. Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-24 17:27:36 +08:00
usb: musb: dsps: use proper child nodes This moves the two instances from the big node into two child nodes. The glue layer ontop does almost nothing. There is one devices containing the control module for USB (2) phy, (2) usb and later the dma engine. The usb device is the "glue device" which contains the musb device as a child. This is what we do ever since. The new file musb_am335x is just here to prob the new bus and populate child devices. There are a lot of changes to the dsps file as a result of the changes: - musb_core_offset This is gone. The device tree provides memory ressources information for the device there is no need to "fix" things - instances This is gone as well. If we have two instances then we have have two child enabled nodes in the device tree. For instance the SoC in beagle bone has two USB instances but only one has been wired up so there is no need to load and init the second instance since it won't be used. - dsps_glue is now per glue device In the past there was one of this structs but with an array of two and each instance accessed its variable depending on the platform device id. - no unneeded copy of structs I do not know why struct dsps_musb_wrapper is copied but it is not necessary. The same goes for musb_hdrc_platform_data which allocated on demand and then again by platform_device_add_data(). One copy is enough. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-05 20:51:33 +08:00
config USB_MUSB_AM335X_CHILD
tristate
usb: musb: use a Kconfig choice to pick the right DMA method The logic to allow only one DMA driver in MUSB is currently flawed, because it also allows picking no DMA driver at all and also not selecting PIO mode. Using a choice statement makes this foolproof for now and also simplifies the Makefile. Unfortunately, we will have to revisit this when we start supporting multiple ARM platforms in a single kernel binary, because at that point we will actually need to select multiple DMA drivers and pick the right one at run-time. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-10-02 22:45:45 +08:00
choice
prompt 'MUSB DMA mode'
usb: musb: add support for JZ4740 usb device controller Add support for Ingenic JZ4740 USB Device Controller through a specific musb glue layer. JZ4740 UDC not being OTG compatible and missing some hardware registers, this musb glue layer is written from scratch to be used in gadget mode only and take silicon design specifics into account. Signed-off-by: Apelete Seketeli <apelete@seketeli.net> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-12-20 04:42:26 +08:00
default MUSB_PIO_ONLY if ARCH_MULTIPLATFORM || USB_MUSB_JZ4740
usb: musb: use a Kconfig choice to pick the right DMA method The logic to allow only one DMA driver in MUSB is currently flawed, because it also allows picking no DMA driver at all and also not selecting PIO mode. Using a choice statement makes this foolproof for now and also simplifies the Makefile. Unfortunately, we will have to revisit this when we start supporting multiple ARM platforms in a single kernel binary, because at that point we will actually need to select multiple DMA drivers and pick the right one at run-time. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-10-02 22:45:45 +08:00
default USB_UX500_DMA if USB_MUSB_UX500
default USB_INVENTRA_DMA if USB_MUSB_OMAP2PLUS || USB_MUSB_BLACKFIN
default USB_TI_CPPI_DMA if USB_MUSB_DAVINCI
default USB_TUSB_OMAP_DMA if USB_MUSB_TUSB6010
usb: musb: Add support for ti81xx platform TI81XX platform has two musb interfaces and uses CPPI4.1 DMA engine. It has builtin USB PHYs as AM35x. The current set of patches adds support for one instance and only in PIO mode. [ balbi@ti.com : make it compile and solve a "may be used uninitialized" warning ] Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Ravi Babu <ravibabu@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-03-12 22:00:22 +08:00
default MUSB_PIO_ONLY if USB_MUSB_TUSB6010 || USB_MUSB_DA8XX || USB_MUSB_AM35X \
|| USB_MUSB_DSPS
USB: Add MUSB and TUSB support This patch adds support for MUSB and TUSB controllers integrated into omap2430 and davinci. It also adds support for external tusb6010 controller. Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-24 17:27:36 +08:00
help
usb: musb: use a Kconfig choice to pick the right DMA method The logic to allow only one DMA driver in MUSB is currently flawed, because it also allows picking no DMA driver at all and also not selecting PIO mode. Using a choice statement makes this foolproof for now and also simplifies the Makefile. Unfortunately, we will have to revisit this when we start supporting multiple ARM platforms in a single kernel binary, because at that point we will actually need to select multiple DMA drivers and pick the right one at run-time. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-10-02 22:45:45 +08:00
Unfortunately, only one option can be enabled here. Ideally one
should be able to build all these drivers into one kernel to
allow using DMA on multiplatform kernels.
USB: Add MUSB and TUSB support This patch adds support for MUSB and TUSB controllers integrated into omap2430 and davinci. It also adds support for external tusb6010 controller. Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-24 17:27:36 +08:00
usb: musb: ux500: add configuration and build options for ux500 dma Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-03-22 22:55:59 +08:00
config USB_UX500_DMA
usb: musb: name ux500 platforms more broadly The Kconfig help text is talking about the U5500 which is no longer supported by the kernel. Name the help text after the config symbol which is more correct. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-09-07 00:09:06 +08:00
bool 'ST Ericsson Ux500'
usb: musb: use a Kconfig choice to pick the right DMA method The logic to allow only one DMA driver in MUSB is currently flawed, because it also allows picking no DMA driver at all and also not selecting PIO mode. Using a choice statement makes this foolproof for now and also simplifies the Makefile. Unfortunately, we will have to revisit this when we start supporting multiple ARM platforms in a single kernel binary, because at that point we will actually need to select multiple DMA drivers and pick the right one at run-time. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-10-02 22:45:45 +08:00
depends on USB_MUSB_UX500
usb: musb: ux500: add configuration and build options for ux500 dma Signed-off-by: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-03-22 22:55:59 +08:00
help
Enable DMA transfers on UX500 platforms.
USB: Add MUSB and TUSB support This patch adds support for MUSB and TUSB controllers integrated into omap2430 and davinci. It also adds support for external tusb6010 controller. Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-24 17:27:36 +08:00
config USB_INVENTRA_DMA
usb: musb: use a Kconfig choice to pick the right DMA method The logic to allow only one DMA driver in MUSB is currently flawed, because it also allows picking no DMA driver at all and also not selecting PIO mode. Using a choice statement makes this foolproof for now and also simplifies the Makefile. Unfortunately, we will have to revisit this when we start supporting multiple ARM platforms in a single kernel binary, because at that point we will actually need to select multiple DMA drivers and pick the right one at run-time. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-10-02 22:45:45 +08:00
bool 'Inventra'
depends on USB_MUSB_OMAP2PLUS || USB_MUSB_BLACKFIN
USB: Add MUSB and TUSB support This patch adds support for MUSB and TUSB controllers integrated into omap2430 and davinci. It also adds support for external tusb6010 controller. Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-24 17:27:36 +08:00
help
Enable DMA transfers using Mentor's engine.
config USB_TI_CPPI_DMA
usb: musb: use a Kconfig choice to pick the right DMA method The logic to allow only one DMA driver in MUSB is currently flawed, because it also allows picking no DMA driver at all and also not selecting PIO mode. Using a choice statement makes this foolproof for now and also simplifies the Makefile. Unfortunately, we will have to revisit this when we start supporting multiple ARM platforms in a single kernel binary, because at that point we will actually need to select multiple DMA drivers and pick the right one at run-time. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-10-02 22:45:45 +08:00
bool 'TI CPPI (Davinci)'
depends on USB_MUSB_DAVINCI
USB: Add MUSB and TUSB support This patch adds support for MUSB and TUSB controllers integrated into omap2430 and davinci. It also adds support for external tusb6010 controller. Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-24 17:27:36 +08:00
help
Enable DMA transfers when TI CPPI DMA is available.
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 18:13:04 +08:00
config USB_TI_CPPI41_DMA
bool 'TI CPPI 4.1 (AM335x)'
depends on ARCH_OMAP
USB: Add MUSB and TUSB support This patch adds support for MUSB and TUSB controllers integrated into omap2430 and davinci. It also adds support for external tusb6010 controller. Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-24 17:27:36 +08:00
config USB_TUSB_OMAP_DMA
usb: musb: use a Kconfig choice to pick the right DMA method The logic to allow only one DMA driver in MUSB is currently flawed, because it also allows picking no DMA driver at all and also not selecting PIO mode. Using a choice statement makes this foolproof for now and also simplifies the Makefile. Unfortunately, we will have to revisit this when we start supporting multiple ARM platforms in a single kernel binary, because at that point we will actually need to select multiple DMA drivers and pick the right one at run-time. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-10-02 22:45:45 +08:00
bool 'TUSB 6010'
usb: musb: add Kconfig options for each glue layer This will make things simpler when choosing which glue layer to compile. It avoids a lot of magic around the "default" Kconfig option and lets the user choose what exactly s/he wants to compile. Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-12-01 20:23:48 +08:00
depends on USB_MUSB_TUSB6010
USB: Add MUSB and TUSB support This patch adds support for MUSB and TUSB controllers integrated into omap2430 and davinci. It also adds support for external tusb6010 controller. Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-24 17:27:36 +08:00
depends on ARCH_OMAP
help
Enable DMA transfers on TUSB 6010 when OMAP DMA is available.
usb: musb: use a Kconfig choice to pick the right DMA method The logic to allow only one DMA driver in MUSB is currently flawed, because it also allows picking no DMA driver at all and also not selecting PIO mode. Using a choice statement makes this foolproof for now and also simplifies the Makefile. Unfortunately, we will have to revisit this when we start supporting multiple ARM platforms in a single kernel binary, because at that point we will actually need to select multiple DMA drivers and pick the right one at run-time. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-10-02 22:45:45 +08:00
config MUSB_PIO_ONLY
bool 'Disable DMA (always use PIO)'
help
All data is copied between memory and FIFO by the CPU.
DMA controllers are ignored.
Do not choose this unless DMA support for your SOC or board
is unavailable (or unstable). When DMA is enabled at compile time,
you can still disable it at run time using the "use_dma=n" module
parameter.
endchoice
usb: musb: cleanup kconfig The whole thing depends on USB_MUSB_HDRC, just add an 'if'. Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-20 08:42:27 +08:00
endif # USB_MUSB_HDRC